horok/libreoffice
1
0
Fork 0
Code Activity
libreoffice/oox/qa/unit/vml.cxx
Daniel Baumann 8e63e14cf6
Adding upstream version 4:25.2.3. 
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
2025-06-22 16:20:04 +02:00

247 lines
12 KiB
C++
Raw Permalink Blame History

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*/
#include <sal/config.h>
#include <test/unoapi_test.hxx>
#include <com/sun/star/beans/XPropertySet.hpp>
#include <com/sun/star/drawing/LineStyle.hpp>
#include <com/sun/star/drawing/PointSequence.hpp>
#include <com/sun/star/drawing/PointSequenceSequence.hpp>
#include <com/sun/star/drawing/PolygonKind.hpp>
#include <com/sun/star/drawing/PolyPolygonBezierCoords.hpp>
#include <com/sun/star/drawing/XDrawPageSupplier.hpp>
#include <com/sun/star/drawing/XDrawPagesSupplier.hpp>
#include <com/sun/star/lang/XServiceInfo.hpp>
#include <com/sun/star/drawing/ColorMode.hpp>
using namespace ::com::sun::star;
/// oox vml tests.
class OoxVmlTest : public UnoApiTest
{
public:
OoxVmlTest()
: UnoApiTest(u"/oox/qa/unit/data/"_ustr)
{
}
};
CPPUNIT_TEST_FIXTURE(OoxVmlTest, tdf112450_vml_polyline)
{
// Load a document with v:polyline shapes. Error was, that the size was set to zero and the
// points were zero because of missing decode from length with unit.
loadFromFile(u"tdf112450_vml_polyline.docx");
uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY);
uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPagesSupplier->getDrawPages()->getByIndex(0),
uno::UNO_QUERY);
{
// This tests a polyline shape which is not closed.
uno::Reference<drawing::XShape> xShape(xDrawPage->getByIndex(0), uno::UNO_QUERY);
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
// Without fix in place, Geometry had 2 points, both 0|0.
drawing::PointSequenceSequence aGeometry;
xShapeProps->getPropertyValue(u"Geometry"_ustr) >>= aGeometry;
drawing::PointSequence aPolygon = aGeometry[0];
CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(6879), aPolygon[3].X, 1);
CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(487), aPolygon[3].Y, 1);
// Without fix in place, width and height were zero
CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(6879), xShape->getSize().Width, 1);
CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(1926), xShape->getSize().Height, 1);
// After the fix the shape has still to be PolygonKind_PLIN
drawing::PolygonKind ePolygonKind;
xShapeProps->getPropertyValue(u"PolygonKind"_ustr) >>= ePolygonKind;
CPPUNIT_ASSERT_EQUAL(drawing::PolygonKind_PLIN, ePolygonKind);
}
{
uno::Reference<drawing::XShape> xShape(xDrawPage->getByIndex(1), uno::UNO_QUERY);
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
// Without fix in place, Geometry had 2 points, both 0|0.
drawing::PointSequenceSequence aGeometry;
xShapeProps->getPropertyValue(u"Geometry"_ustr) >>= aGeometry;
drawing::PointSequence aPolygon = aGeometry[0];
CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(5062), aPolygon[2].X, 1);
CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(2247), aPolygon[2].Y, 1);
// Without fix in place, width and height were zero
CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(6163), xShape->getSize().Width, 1);
CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(2247), xShape->getSize().Height, 1);
// Without fix in place the shape was not closed, it had PolygonKind_PLIN
drawing::PolygonKind ePolygonKind;
xShapeProps->getPropertyValue(u"PolygonKind"_ustr) >>= ePolygonKind;
CPPUNIT_ASSERT_EQUAL(drawing::PolygonKind_POLY, ePolygonKind);
}
{
// This tests a filled shape where v:polyline does not have attribute coordsize
uno::Reference<drawing::XShape> xShape(xDrawPage->getByIndex(2), uno::UNO_QUERY);
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
// Without fix in place, Geometry had 2 points, both 0|0.
drawing::PointSequenceSequence aGeometry;
xShapeProps->getPropertyValue(u"Geometry"_ustr) >>= aGeometry;
drawing::PointSequence aPolygon = aGeometry[0];
CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(2095), aPolygon[3].X, 1);
CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(608), aPolygon[3].Y, 1);
// Without fix in place, width and height were zero
CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(5634), xShape->getSize().Width, 1);
CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(2485), xShape->getSize().Height, 1);
// Without fix in place the shape was not closed, it had PolygonKind_PLIN
drawing::PolygonKind ePolygonKind;
xShapeProps->getPropertyValue(u"PolygonKind"_ustr) >>= ePolygonKind;
CPPUNIT_ASSERT_EQUAL(drawing::PolygonKind_POLY, ePolygonKind);
}
}
CPPUNIT_TEST_FIXTURE(OoxVmlTest, tdf137314_vml_rotation_unit_fd)
{
// Load a document with a 30deg rotated arc on a drawing canvas. Rotation is given
// as 1966080fd. Error was, that the vml angle unit "fd" was not converted to Degree100.
loadFromFile(u"tdf137314_vml_rotation_unit_fd.docx");
uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY);
uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPagesSupplier->getDrawPages()->getByIndex(0),
uno::UNO_QUERY);
uno::Reference<container::XIndexAccess> xGroup(xDrawPage->getByIndex(0), uno::UNO_QUERY);
uno::Reference<drawing::XShape> xShape(xGroup->getByIndex(1), uno::UNO_QUERY);
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
drawing::PolyPolygonBezierCoords aPolyPolygonBezierCoords;
xShapeProps->getPropertyValue(u"PolyPolygonBezier"_ustr) >>= aPolyPolygonBezierCoords;
drawing::PointSequence aPolygon = aPolyPolygonBezierCoords.Coordinates[1];
// Without fix in place, the vector was -1441|1490.
// [1] and [2] are Bezier-curve control points.
sal_Int32 nDiffX = aPolygon[3].X - aPolygon[0].X;
CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(1490), nDiffX, 1);
sal_Int32 nDiffY = aPolygon[3].Y - aPolygon[0].Y;
CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(1441), nDiffY, 1);
}
CPPUNIT_TEST_FIXTURE(OoxVmlTest, testSpt202ShapeType)
{
// Load a document with a groupshape, 2nd child is a <v:shape>, its type has o:spt set to 202
// (TextBox).
loadFromFile(u"group-spt202.docx");
uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY);
uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPagesSupplier->getDrawPages()->getByIndex(0),
uno::UNO_QUERY);
uno::Reference<container::XIndexAccess> xGroup(xDrawPage->getByIndex(0), uno::UNO_QUERY);
uno::Reference<drawing::XShape> xShape(xGroup->getByIndex(1), uno::UNO_QUERY);
// Without the accompanying fix in place, this test would have failed with:
// - Expected: com.sun.star.drawing.TextShape
// - Actual : com.sun.star.drawing.CustomShape
// and then the size of the group shape was incorrect, e.g. its right edge was outside the page
// boundaries.
CPPUNIT_ASSERT_EQUAL(u"com.sun.star.drawing.TextShape"_ustr, xShape->getShapeType());
}
CPPUNIT_TEST_FIXTURE(OoxVmlTest, testShapeNonAutosizeWithText)
{
// Load a document which has a group shape, containing a single child.
// 17.78 cm is the full group shape width, 19431/64008 is the child shape's relative width inside
// that, so 5.3975 cm should be the shape width.
loadFromFile(u"shape-non-autosize-with-text.docx");
uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY);
uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPagesSupplier->getDrawPages()->getByIndex(0),
uno::UNO_QUERY);
uno::Reference<container::XIndexAccess> xGroup(xDrawPage->getByIndex(0), uno::UNO_QUERY);
uno::Reference<drawing::XShape> xShape(xGroup->getByIndex(0), uno::UNO_QUERY);
// Without the accompanying fix in place, this test would have failed with:
// - Actual : 1115
// - Expected: 5398
// because the width was determined using its text size, not using the explicit size.
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(5398), xShape->getSize().Width);
}
CPPUNIT_TEST_FIXTURE(OoxVmlTest, testGraphicStroke)
{
loadFromFile(u"graphic-stroke.pptx");
uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY);
uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPagesSupplier->getDrawPages()->getByIndex(0),
uno::UNO_QUERY);
CPPUNIT_ASSERT_EQUAL(sal_Int32(1), xDrawPage->getCount());
uno::Reference<beans::XPropertySet> xShape;
uno::Reference<lang::XServiceInfo> xInfo(xDrawPage->getByIndex(0), uno::UNO_QUERY);
if (xInfo->supportsService(u"com.sun.star.drawing.OLE2Shape"_ustr))
xShape.set(xInfo, uno::UNO_QUERY);
CPPUNIT_ASSERT(xShape.is());
drawing::LineStyle eLineStyle{};
xShape->getPropertyValue(u"LineStyle"_ustr) >>= eLineStyle;
// Without the accompanying fix in place, this test would have failed with:
// - Expected: 1
// - Actual : 0
// i.e. line style was NONE, not SOLID.
CPPUNIT_ASSERT_EQUAL(drawing::LineStyle_SOLID, eLineStyle);
}
CPPUNIT_TEST_FIXTURE(OoxVmlTest, testWatermark)
{
// Given a document with a picture watermark, and the "washout" checkbox is ticked on the Word
// UI:
// When loading that document:
loadFromFile(u"watermark.docx");
// Then make sure the watermark effect is not lost on import:
uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY);
uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPagesSupplier->getDrawPages()->getByIndex(0),
uno::UNO_QUERY);
uno::Reference<beans::XPropertySet> xShape(xDrawPage->getByIndex(0), uno::UNO_QUERY);
drawing::ColorMode eMode{};
xShape->getPropertyValue(u"GraphicColorMode"_ustr) >>= eMode;
// Without the accompanying fix in place, this test would have failed with:
// - Expected: 3
// - Actual : 0
// i.e. the color mode was STANDARD, not WATERMARK.
CPPUNIT_ASSERT_EQUAL(drawing::ColorMode_WATERMARK, eMode);
}
CPPUNIT_TEST_FIXTURE(OoxVmlTest, testWriterFontworkTrimTrue)
{
// The document contains a shape, that will be exported as VML shape to docx. Error was that the
// attribute trim was not written out and thus import had treated it as the default 'false' and
// had reduced the shape height.
loadFromFile(u"tdf153260_VML_trim_export.odt");
// FIXME: tdf#153183 validation error in OOXML export: Errors: 1
// Attribute 'ID' is not allowed to appear in element 'v:shape'.
skipValidation();
saveAndReload(u"Office Open XML Text"_ustr);
uno::Reference<drawing::XDrawPageSupplier> xDrawPageSupplier(mxComponent, uno::UNO_QUERY);
uno::Reference<drawing::XShape> xShape(xDrawPageSupplier->getDrawPage()->getByIndex(0),
uno::UNO_QUERY);
// Make sure the shape height is not changed.
// Without the fix the test would have failed with expected 4999 actual 1732.
awt::Size aSize = xShape->getSize();
CPPUNIT_ASSERT_DOUBLES_EQUAL(4999, aSize.Height, 2);
}
CPPUNIT_TEST_FIXTURE(OoxVmlTest, testVMLDetectWordArtOnImport)
{
// The document contains a WordArt shape with type other than "fontwork-foo". Error was that
// WordArt was not detected and thus shrinking shape to text content was not prevented.
loadFromFile(u"tdf153258_VML_import_WordArt_detection.docx");
uno::Reference<drawing::XDrawPageSupplier> xDrawPageSupplier(mxComponent, uno::UNO_QUERY);
uno::Reference<drawing::XShape> xShape(xDrawPageSupplier->getDrawPage()->getByIndex(0),
uno::UNO_QUERY);
// Make sure the shape width and height is not changed.
awt::Size aSize = xShape->getSize();
// Without the fix the test would have failed with expected 7514 actual 1453.
CPPUNIT_ASSERT_DOUBLES_EQUAL(7514, aSize.Width, 2);
// Without the fix the test would have failed with expected 4540 actual 309.
CPPUNIT_ASSERT_DOUBLES_EQUAL(4540, aSize.Height, 2);
}
CPPUNIT_PLUGIN_IMPLEMENT();
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
View git blame Copy permalink