horok/libreoffice
1
0
Fork 0
Code Activity
libreoffice/sd/qa/unit/misc-tests.cxx
Daniel Baumann 8e63e14cf6
Adding upstream version 4:25.2.3. 
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
2025-06-22 16:20:04 +02:00

1034 lines
49 KiB
C++
Raw Permalink Blame History

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*/
#include <officecfg/Office/Common.hxx>
#include "sdmodeltestbase.hxx"
#include <com/sun/star/uno/Reference.hxx>
#include <com/sun/star/awt/Gradient.hpp>
#include <com/sun/star/drawing/FillStyle.hpp>
#include <com/sun/star/drawing/TextVerticalAdjust.hpp>
#include <com/sun/star/drawing/XDrawPagesSupplier.hpp>
#include <com/sun/star/drawing/XDrawPages.hpp>
#include <com/sun/star/drawing/XDrawPage.hpp>
#include <com/sun/star/drawing/XShapes.hpp>
#include <com/sun/star/graphic/XGraphic.hpp>
#include <com/sun/star/container/XIndexAccess.hpp>
#include <com/sun/star/table/XTable.hpp>
#include <com/sun/star/table/XMergeableCellRange.hpp>
#include <com/sun/star/lang/XSingleServiceFactory.hpp>
#include <DrawDocShell.hxx>
#include <drawdoc.hxx>
#include <vcl/scheduler.hxx>
#include <svx/sdr/table/tablecontroller.hxx>
#include <sfx2/request.hxx>
#include <svx/svdpagv.hxx>
#include <svx/svxids.hrc>
#include <editeng/eeitem.hxx>
#include <editeng/adjustitem.hxx>
#include <editeng/outlobj.hxx>
#include <editeng/editobj.hxx>
#include <comphelper/base64.hxx>
#include <docmodel/uno/UnoGradientTools.hxx>
#include <undo/undomanager.hxx>
#include <GraphicViewShell.hxx>
#include <sdpage.hxx>
#include <LayerTabBar.hxx>
#include <vcl/event.hxx>
#include <vcl/keycodes.hxx>
#include <svx/svdoashp.hxx>
#include <tools/gen.hxx>
#include <svx/view3d.hxx>
#include <svx/scene3d.hxx>
#include <svx/sdmetitm.hxx>
#include <unomodel.hxx>
using namespace ::com::sun::star;
/// Impress miscellaneous tests.
class SdMiscTest : public SdModelTestBase
{
public:
SdMiscTest()
: SdModelTestBase(u"/sd/qa/unit/data/"_ustr)
{
}
void testTdf99396();
void testTableObjectUndoTest();
void testFillGradient();
void testTdf44774();
void testTdf38225();
void testTdf101242_ODF_no_settings();
void testTdf101242_ODF_add_settings();
void testTdf101242_settings_keep();
void testTdf101242_settings_remove();
void testTdf119392();
void testTdf67248();
void testTdf119956();
void testTdf120527();
void testTextColumns();
void testTdf98839_ShearVFlipH();
void testTdf130988();
void testTdf131033();
void testTdf129898LayerDrawnInSlideshow();
void testTdf136956();
void testTdf39519();
void testTdf164284();
void testEncodedTableStyles();
void testTdf157117();
CPPUNIT_TEST_SUITE(SdMiscTest);
CPPUNIT_TEST(testTdf99396);
CPPUNIT_TEST(testTableObjectUndoTest);
CPPUNIT_TEST(testFillGradient);
CPPUNIT_TEST(testTdf44774);
CPPUNIT_TEST(testTdf38225);
CPPUNIT_TEST(testTdf101242_ODF_no_settings);
CPPUNIT_TEST(testTdf101242_ODF_add_settings);
CPPUNIT_TEST(testTdf101242_settings_keep);
CPPUNIT_TEST(testTdf101242_settings_remove);
CPPUNIT_TEST(testTdf119392);
CPPUNIT_TEST(testTdf67248);
CPPUNIT_TEST(testTdf119956);
CPPUNIT_TEST(testTdf120527);
CPPUNIT_TEST(testTextColumns);
CPPUNIT_TEST(testTdf98839_ShearVFlipH);
CPPUNIT_TEST(testTdf130988);
CPPUNIT_TEST(testTdf131033);
CPPUNIT_TEST(testTdf129898LayerDrawnInSlideshow);
CPPUNIT_TEST(testTdf136956);
CPPUNIT_TEST(testTdf39519);
CPPUNIT_TEST(testTdf164284);
CPPUNIT_TEST(testEncodedTableStyles);
CPPUNIT_TEST(testTdf157117);
CPPUNIT_TEST_SUITE_END();
};
void SdMiscTest::testTdf99396()
{
// Load the document and select the table.
createSdImpressDoc("tdf99396.odp");
SdXImpressDocument* pXImpressDocument = dynamic_cast<SdXImpressDocument*>(mxComponent.get());
CPPUNIT_ASSERT(pXImpressDocument);
sd::ViewShell* pViewShell = pXImpressDocument->GetDocShell()->GetViewShell();
SdPage* pPage = pViewShell->GetActualPage();
SdrObject* pObject = pPage->GetObj(0);
SdrView* pView = pViewShell->GetView();
pView->MarkObj(pObject, pView->GetSdrPageView());
SdDrawDocument* pDoc = pXImpressDocument->GetDoc();
// Make sure that the undo stack is empty.
CPPUNIT_ASSERT_EQUAL(static_cast<size_t>(0), pDoc->GetUndoManager()->GetUndoActionCount());
// Set the vertical alignment of the cells to bottom.
sdr::table::SvxTableController* pTableController
= dynamic_cast<sdr::table::SvxTableController*>(pView->getSelectionController().get());
CPPUNIT_ASSERT(pTableController);
SfxRequest aRequest(*pViewShell->GetViewFrame(), SID_TABLE_VERT_BOTTOM);
pTableController->Execute(aRequest);
// This was 0, it wasn't possible to undo a vertical alignment change.
CPPUNIT_ASSERT_EQUAL(static_cast<size_t>(1), pDoc->GetUndoManager()->GetUndoActionCount());
}
void SdMiscTest::testTableObjectUndoTest()
{
// See tdf#99396 for the issue
// Load the document and select the table.
createSdImpressDoc("tdf99396.odp");
SdXImpressDocument* pXImpressDocument = dynamic_cast<SdXImpressDocument*>(mxComponent.get());
CPPUNIT_ASSERT(pXImpressDocument);
sd::ViewShell* pViewShell = pXImpressDocument->GetDocShell()->GetViewShell();
SdPage* pPage = pViewShell->GetActualPage();
auto pTableObject = dynamic_cast<sdr::table::SdrTableObj*>(pPage->GetObj(0));
CPPUNIT_ASSERT(pTableObject);
SdrView* pView = pViewShell->GetView();
pView->MarkObj(pTableObject, pView->GetSdrPageView());
SdDrawDocument* pDoc = pXImpressDocument->GetDoc();
// Make sure that the undo stack is empty.
CPPUNIT_ASSERT_EQUAL(static_cast<size_t>(0), pDoc->GetUndoManager()->GetUndoActionCount());
// Set horizontal and vertical adjustment during text edit.
pView->SdrBeginTextEdit(pTableObject);
CPPUNIT_ASSERT(pView->GetTextEditObject());
{
SfxRequest aRequest(*pViewShell->GetViewFrame(), SID_ATTR_PARA_ADJUST_RIGHT);
SfxItemSet aEditAttr(pDoc->GetPool());
pView->GetAttributes(aEditAttr);
SfxItemSet aNewAttr(*(aEditAttr.GetPool()), aEditAttr.GetRanges());
aNewAttr.Put(SvxAdjustItem(SvxAdjust::Right, EE_PARA_JUST));
aRequest.Done(aNewAttr);
const SfxItemSet* pArgs = aRequest.GetArgs();
pView->SetAttributes(*pArgs);
}
const auto& pLocalUndoManager = pView->getViewLocalUndoManager();
CPPUNIT_ASSERT_EQUAL(size_t(1), pLocalUndoManager->GetUndoActionCount());
CPPUNIT_ASSERT_EQUAL(u"Apply attributes"_ustr, pLocalUndoManager->GetUndoActionComment());
{
auto pTableController
= dynamic_cast<sdr::table::SvxTableController*>(pView->getSelectionController().get());
CPPUNIT_ASSERT(pTableController);
SfxRequest aRequest(*pViewShell->GetViewFrame(), SID_TABLE_VERT_BOTTOM);
pTableController->Execute(aRequest);
}
// Global change "Format cell" is applied only - Change the vertical alignment to "Bottom"
CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetUndoManager()->GetUndoActionCount());
CPPUNIT_ASSERT_EQUAL(u"Format cell"_ustr, pDoc->GetUndoManager()->GetUndoActionComment());
pView->SdrEndTextEdit();
// End of text edit, so the text edit action is added to the undo stack
CPPUNIT_ASSERT_EQUAL(size_t(2), pDoc->GetUndoManager()->GetUndoActionCount());
CPPUNIT_ASSERT_EQUAL(u"Edit text of Table"_ustr,
pDoc->GetUndoManager()->GetUndoActionComment(0));
CPPUNIT_ASSERT_EQUAL(u"Format cell"_ustr, pDoc->GetUndoManager()->GetUndoActionComment(1));
// Check that the result is what we expect.
{
uno::Reference<table::XTable> xTable = pTableObject->getTable();
uno::Reference<beans::XPropertySet> xCell(xTable->getCellByPosition(0, 0), uno::UNO_QUERY);
drawing::TextVerticalAdjust eAdjust = xCell->getPropertyValue(u"TextVerticalAdjust"_ustr)
.get<drawing::TextVerticalAdjust>();
CPPUNIT_ASSERT_EQUAL(int(drawing::TextVerticalAdjust_BOTTOM), static_cast<int>(eAdjust));
}
{
const EditTextObject& rEdit
= pTableObject->getText(0)->GetOutlinerParaObject()->GetTextObject();
const SfxItemSet& rParaAttribs = rEdit.GetParaAttribs(0);
auto pAdjust = rParaAttribs.GetItem(EE_PARA_JUST);
CPPUNIT_ASSERT_EQUAL(SvxAdjust::Right, pAdjust->GetAdjust());
}
// Now undo.
pXImpressDocument->GetDocShell()->GetUndoManager()->Undo();
// Undoing the last action - one left
CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetUndoManager()->GetUndoActionCount());
CPPUNIT_ASSERT_EQUAL(u"Format cell"_ustr, pDoc->GetUndoManager()->GetUndoActionComment(0));
// Check again that the result is what we expect.
{
uno::Reference<table::XTable> xTable = pTableObject->getTable();
uno::Reference<beans::XPropertySet> xCell(xTable->getCellByPosition(0, 0), uno::UNO_QUERY);
drawing::TextVerticalAdjust eAdjust = xCell->getPropertyValue(u"TextVerticalAdjust"_ustr)
.get<drawing::TextVerticalAdjust>();
// This failed: Undo() did not change it from drawing::TextVerticalAdjust_BOTTOM.
CPPUNIT_ASSERT_EQUAL(int(drawing::TextVerticalAdjust_TOP), static_cast<int>(eAdjust));
}
{
const EditTextObject& rEdit
= pTableObject->getText(0)->GetOutlinerParaObject()->GetTextObject();
const SfxItemSet& rParaAttribs = rEdit.GetParaAttribs(0);
auto pAdjust = rParaAttribs.GetItem(EE_PARA_JUST);
CPPUNIT_ASSERT_EQUAL(SvxAdjust::Center, pAdjust->GetAdjust());
}
Scheduler::ProcessEventsToIdle();
CPPUNIT_ASSERT_EQUAL(size_t(1), pDoc->GetUndoManager()->GetUndoActionCount());
CPPUNIT_ASSERT_EQUAL(u"Format cell"_ustr, pDoc->GetUndoManager()->GetUndoActionComment(0));
/*
* now test tdf#103950 - Undo does not revert bundled font size changes for table cells
*/
pTableObject = dynamic_cast<sdr::table::SdrTableObj*>(pPage->GetObj(0));
pView->MarkObj(pTableObject, pView->GetSdrPageView()); // select table
{
SfxRequest aRequest(*pViewShell->GetViewFrame(), SID_GROW_FONT_SIZE);
static_cast<sd::DrawViewShell*>(pViewShell)->ExecChar(aRequest);
}
Scheduler::ProcessEventsToIdle();
CPPUNIT_ASSERT_EQUAL(static_cast<size_t>(3), pDoc->GetUndoManager()->GetUndoActionCount());
CPPUNIT_ASSERT_EQUAL(u"Apply attributes to Table"_ustr,
pDoc->GetUndoManager()->GetUndoActionComment(0));
CPPUNIT_ASSERT_EQUAL(u"Grow font size"_ustr, pDoc->GetUndoManager()->GetUndoActionComment(1));
CPPUNIT_ASSERT_EQUAL(u"Format cell"_ustr, pDoc->GetUndoManager()->GetUndoActionComment(2));
}
void SdMiscTest::testFillGradient()
{
createSdImpressDoc();
uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY);
uno::Reference<drawing::XDrawPages> xDrawPages = xDrawPagesSupplier->getDrawPages();
// Insert a new page.
uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPages->insertNewByIndex(0),
uno::UNO_SET_THROW);
uno::Reference<drawing::XShapes> xShapes(xDrawPage, uno::UNO_QUERY_THROW);
// Create a rectangle
uno::Reference<lang::XMultiServiceFactory> xFactory(mxComponent, uno::UNO_QUERY);
CPPUNIT_ASSERT(xFactory.is());
uno::Reference<drawing::XShape> xShape1(
xFactory->createInstance(u"com.sun.star.drawing.RectangleShape"_ustr),
uno::UNO_QUERY_THROW);
uno::Reference<beans::XPropertySet> xPropSet(xShape1, uno::UNO_QUERY_THROW);
// Set FillStyle and FillGradient
awt::Gradient aGradient;
aGradient.StartColor = sal_Int32(COL_LIGHTRED);
aGradient.EndColor = sal_Int32(COL_LIGHTGREEN);
xPropSet->setPropertyValue(u"FillStyle"_ustr, uno::Any(drawing::FillStyle_GRADIENT));
xPropSet->setPropertyValue(u"FillGradient"_ustr, uno::Any(aGradient));
// Add the rectangle to the page.
xShapes->add(xShape1);
// Retrieve the shape and check FillStyle and FillGradient
uno::Reference<container::XIndexAccess> xIndexAccess(xDrawPage, uno::UNO_QUERY_THROW);
uno::Reference<beans::XPropertySet> xPropSet2(xIndexAccess->getByIndex(0),
uno::UNO_QUERY_THROW);
drawing::FillStyle eFillStyle;
awt::Gradient2 aGradient2;
CPPUNIT_ASSERT(xPropSet2->getPropertyValue(u"FillStyle"_ustr) >>= eFillStyle);
CPPUNIT_ASSERT_EQUAL(int(drawing::FillStyle_GRADIENT), static_cast<int>(eFillStyle));
CPPUNIT_ASSERT(xPropSet2->getPropertyValue(u"FillGradient"_ustr) >>= aGradient2);
// MCGR: Use the completely imported gradient to check for correctness
const basegfx::BColorStops aColorStops
= model::gradient::getColorStopsFromUno(aGradient2.ColorStops);
CPPUNIT_ASSERT_EQUAL(size_t(2), aColorStops.size());
CPPUNIT_ASSERT_EQUAL(0.0, aColorStops[0].getStopOffset());
CPPUNIT_ASSERT_EQUAL(COL_LIGHTRED, Color(aColorStops[0].getStopColor()));
CPPUNIT_ASSERT(basegfx::fTools::equal(aColorStops[1].getStopOffset(), 1.0));
CPPUNIT_ASSERT_EQUAL(COL_LIGHTGREEN, Color(aColorStops[1].getStopColor()));
}
void SdMiscTest::testTdf44774()
{
createSdDrawDoc();
SdXImpressDocument* pXImpressDocument = dynamic_cast<SdXImpressDocument*>(mxComponent.get());
CPPUNIT_ASSERT(pXImpressDocument);
sd::DrawDocShell* pDocShell = pXImpressDocument->GetDocShell();
SfxStyleSheetBasePool* pSSPool = pDocShell->GetStyleSheetPool();
// Create a new style with an empty name, like what happens in UI when creating a new style
SfxStyleSheetBase& rStyleA
= pSSPool->Make(u""_ustr, SfxStyleFamily::Para, SfxStyleSearchBits::UserDefined);
// Assign a new name, which does not yet set its ApiName
rStyleA.SetName(u"StyleA"_ustr);
// Create another style
SfxStyleSheetBase& rStyleB
= pSSPool->Make(u"StyleB"_ustr, SfxStyleFamily::Para, SfxStyleSearchBits::UserDefined);
// ... and set its parent to the first one
rStyleB.SetParent(u"StyleA"_ustr);
// Now save the file and reload
saveAndReload(u"draw8"_ustr);
pXImpressDocument = dynamic_cast<SdXImpressDocument*>(mxComponent.get());
CPPUNIT_ASSERT(pXImpressDocument);
pDocShell = pXImpressDocument->GetDocShell();
pSSPool = pDocShell->GetStyleSheetPool();
SfxStyleSheetBase* pStyle = pSSPool->Find(u"StyleB"_ustr, SfxStyleFamily::Para);
CPPUNIT_ASSERT(pStyle);
// The parent set in StyleB used to reset, because parent style's msApiName was empty
CPPUNIT_ASSERT_EQUAL(u"StyleA"_ustr, pStyle->GetParent());
}
void SdMiscTest::testTdf38225()
{
createSdImpressDoc();
SdXImpressDocument* pXImpressDocument = dynamic_cast<SdXImpressDocument*>(mxComponent.get());
CPPUNIT_ASSERT(pXImpressDocument);
sd::DrawDocShell* pDocShell = pXImpressDocument->GetDocShell();
SfxStyleSheetBasePool* pSSPool = pDocShell->GetStyleSheetPool();
// Create a new style with a name
pSSPool->Make(u"StyleWithName1"_ustr, SfxStyleFamily::Para, SfxStyleSearchBits::UserDefined);
// Now save the file and reload
saveAndReload(u"draw8"_ustr);
pXImpressDocument = dynamic_cast<SdXImpressDocument*>(mxComponent.get());
CPPUNIT_ASSERT(pXImpressDocument);
pDocShell = pXImpressDocument->GetDocShell();
pSSPool = pDocShell->GetStyleSheetPool();
SfxStyleSheetBase* pStyle = pSSPool->Find(u"StyleWithName1"_ustr, SfxStyleFamily::Para);
CPPUNIT_ASSERT(pStyle);
// Rename the style
CPPUNIT_ASSERT(pStyle->SetName(u"StyleWithName2"_ustr));
// Save the file and reload again
saveAndReload(u"draw8"_ustr);
pXImpressDocument = dynamic_cast<SdXImpressDocument*>(mxComponent.get());
CPPUNIT_ASSERT(pXImpressDocument);
pDocShell = pXImpressDocument->GetDocShell();
pSSPool = pDocShell->GetStyleSheetPool();
// The problem was that the style kept the old name upon reloading
pStyle = pSSPool->Find(u"StyleWithName1"_ustr, SfxStyleFamily::Para);
CPPUNIT_ASSERT(!pStyle);
pStyle = pSSPool->Find(u"StyleWithName2"_ustr, SfxStyleFamily::Para);
CPPUNIT_ASSERT(pStyle);
}
void SdMiscTest::testTdf120527()
{
createSdImpressDoc();
// Load a bitmap into the bitmap table.
uno::Reference<lang::XMultiServiceFactory> xFactory(mxComponent, uno::UNO_QUERY);
CPPUNIT_ASSERT(xFactory.is());
uno::Reference<container::XNameContainer> xBitmaps(
xFactory->createInstance(u"com.sun.star.drawing.BitmapTable"_ustr), uno::UNO_QUERY);
CPPUNIT_ASSERT(xBitmaps.is());
OUString aGraphicURL = createFileURL(u"tdf120527.jpg");
xBitmaps->insertByName(u"test"_ustr, uno::Any(aGraphicURL));
// Create a graphic.
uno::Reference<drawing::XShape> xShape(
xFactory->createInstance(u"com.sun.star.drawing.GraphicObjectShape"_ustr), uno::UNO_QUERY);
CPPUNIT_ASSERT(xShape.is());
uno::Reference<beans::XPropertySet> xShapeProperySet(xShape, uno::UNO_QUERY);
CPPUNIT_ASSERT(xShapeProperySet.is());
xShapeProperySet->setPropertyValue(u"GraphicURL"_ustr, xBitmaps->getByName(u"test"_ustr));
// Insert it.
uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY);
CPPUNIT_ASSERT(xDrawPagesSupplier.is());
uno::Reference<drawing::XDrawPages> xDrawPages = xDrawPagesSupplier->getDrawPages();
CPPUNIT_ASSERT(xDrawPages.is());
uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPages->getByIndex(0), uno::UNO_QUERY);
CPPUNIT_ASSERT(xDrawPage.is());
// This failed with a lang.IllegalArgumentException.
xDrawPage->add(xShape);
// Verify that the graphic was actually consumed.
uno::Reference<graphic::XGraphic> xGraphic;
xShapeProperySet->getPropertyValue(u"Graphic"_ustr) >>= xGraphic;
CPPUNIT_ASSERT(xGraphic.is());
}
// Testing document model part of editengine-columns
void SdMiscTest::testTextColumns()
{
createSdImpressDoc();
uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY);
uno::Reference<drawing::XDrawPages> xDrawPages = xDrawPagesSupplier->getDrawPages();
// Insert a new page.
uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPages->insertNewByIndex(0),
uno::UNO_SET_THROW);
uno::Reference<drawing::XShapes> xShapes(xDrawPage, uno::UNO_QUERY_THROW);
{
// Create a text shape
uno::Reference<lang::XMultiServiceFactory> xFactory(mxComponent, uno::UNO_QUERY);
CPPUNIT_ASSERT(xFactory.is());
uno::Reference<drawing::XShape> xShape(
xFactory->createInstance(u"com.sun.star.drawing.TextShape"_ustr), uno::UNO_QUERY_THROW);
uno::Reference<beans::XPropertySet> xPropSet(xShape, uno::UNO_QUERY_THROW);
// Add the shape to the page.
xShapes->add(xShape);
// Set up columns
auto pTextObj = DynCastSdrTextObj(SdrObject::getSdrObjectFromXShape(xShape));
CPPUNIT_ASSERT(pTextObj);
pTextObj->SetMergedItem(SfxInt16Item(SDRATTR_TEXTCOLUMNS_NUMBER, 2));
pTextObj->SetMergedItem(SdrMetricItem(SDRATTR_TEXTCOLUMNS_SPACING, 1000));
}
{
// Retrieve the shape and check columns
uno::Reference<container::XIndexAccess> xIndexAccess(xDrawPage, uno::UNO_QUERY_THROW);
uno::Reference<drawing::XShape> xShape(xIndexAccess->getByIndex(0), uno::UNO_QUERY_THROW);
auto pTextObj = DynCastSdrTextObj(SdrObject::getSdrObjectFromXShape(xShape));
CPPUNIT_ASSERT(pTextObj);
CPPUNIT_ASSERT_EQUAL(sal_Int16(2), pTextObj->GetTextColumnsNumber());
CPPUNIT_ASSERT_EQUAL(sal_Int32(1000), pTextObj->GetTextColumnsSpacing());
}
}
/// Draw miscellaneous tests.
// Since LO 6.2 the visible/printable/locked information for layers is always
// written as ODF attributes draw:display and draw:protected. It is only read from
// there, if the config items VisibleLayers, PrintableLayers and LockedLayers do
// not exist. The user option WriteLayerStateAsConfigItem can be set to 'true' to
// write these config items in addition to the ODF attributes for to produce
// documents for older LO versions or Apache OpenOffice. With value 'false' no
// config items are written. The 'testTdf101242_xyz' tests combine source
// files with and without config items with option values 'true' and 'false'.
void SdMiscTest::testTdf101242_ODF_add_settings()
{
// Loads a document, which has the visible/printable/locked information for layers
// only in the ODF attributes draw:display and draw:protected. The resaved document
// should still have the ODF attributes and in addition the config items in settings.xml.
// "Load" is needed for to handle layers, simple "loadURL" does not work.
createSdDrawDoc("tdf101242_ODF.odg");
// Saving including items in settings.xml
std::shared_ptr<comphelper::ConfigurationChanges> pBatch(
comphelper::ConfigurationChanges::create());
officecfg::Office::Common::Misc::WriteLayerStateAsConfigItem::set(true, pBatch);
pBatch->commit();
save(u"draw8"_ustr);
// Verify, that the saved document still has the ODF attributes
xmlDocUniquePtr pXmlDoc = parseExport(u"styles.xml"_ustr);
CPPUNIT_ASSERT_MESSAGE("Failed to get 'styles.xml'", pXmlDoc);
static constexpr OString sPathStart(
"/office:document-styles/office:master-styles/draw:layer-set/draw:layer"_ostr);
assertXPath(pXmlDoc,
sPathStart + "[@draw:name='backgroundobjects' and @draw:protected='true']");
assertXPath(pXmlDoc, sPathStart + "[@draw:name='controls' and @draw:display='screen']");
assertXPath(pXmlDoc, sPathStart + "[@draw:name='measurelines' and @draw:display='printer']");
// Verify, that the saved document has got the items in settings.xml
xmlDocUniquePtr pXmlDoc2 = parseExport(u"settings.xml"_ustr);
CPPUNIT_ASSERT_MESSAGE("Failed to get 'settings.xml'", pXmlDoc2);
static constexpr OString sPathStart2("/office:document-settings/office:settings/"
"config:config-item-set[@config:name='ooo:view-settings']/"
"config:config-item-map-indexed[@config:name='Views']/"
"config:config-item-map-entry"_ostr);
// Value is a bitfield with first Byte in order '* * * measurelines controls backgroundobjects background layout'
// The first three bits depend on initialization and may change. The values in file are Base64 encoded.
OUString sBase64;
uno::Sequence<sal_Int8> aDecodedSeq;
sBase64 = getXPathContent(pXmlDoc2,
sPathStart2 + "/config:config-item[@config:name='VisibleLayers']");
CPPUNIT_ASSERT_MESSAGE("Item VisibleLayers does not exists.", !sBase64.isEmpty());
comphelper::Base64::decode(aDecodedSeq, sBase64);
CPPUNIT_ASSERT_EQUAL(0x0F, static_cast<sal_uInt8>(aDecodedSeq[0]) & 0x1F);
sBase64 = getXPathContent(pXmlDoc2,
sPathStart2 + "/config:config-item[@config:name='PrintableLayers']");
CPPUNIT_ASSERT_MESSAGE("Item PrintableLayers does not exists.", !sBase64.isEmpty());
comphelper::Base64::decode(aDecodedSeq, sBase64);
CPPUNIT_ASSERT_EQUAL(0x17, static_cast<sal_uInt8>(aDecodedSeq[0]) & 0x1F);
sBase64 = getXPathContent(pXmlDoc2,
sPathStart2 + "/config:config-item[@config:name='LockedLayers']");
CPPUNIT_ASSERT_MESSAGE("Item LockedLayers does not exists.", !sBase64.isEmpty());
comphelper::Base64::decode(aDecodedSeq, sBase64);
CPPUNIT_ASSERT_EQUAL(0x04, static_cast<sal_uInt8>(aDecodedSeq[0]) & 0x1F);
}
void SdMiscTest::testTdf101242_ODF_no_settings()
{
// Loads a document, which has the visible/printable/locked information for layers
// only in the ODF attributes draw:display and draw:protected. The resave document
// should have only the ODF attributes and no config items in settings.xml.
createSdDrawDoc("tdf101242_ODF.odg");
// Saving without items in settings.xml
std::shared_ptr<comphelper::ConfigurationChanges> pBatch(
comphelper::ConfigurationChanges::create());
officecfg::Office::Common::Misc::WriteLayerStateAsConfigItem::set(false, pBatch);
pBatch->commit();
save(u"draw8"_ustr);
// Verify, that the saved document still has the ODF attributes
xmlDocUniquePtr pXmlDoc = parseExport(u"styles.xml"_ustr);
CPPUNIT_ASSERT_MESSAGE("Failed to get 'styles.xml'", pXmlDoc);
static constexpr OString sPathStart(
"/office:document-styles/office:master-styles/draw:layer-set/draw:layer"_ostr);
assertXPath(pXmlDoc,
sPathStart + "[@draw:name='backgroundobjects' and @draw:protected='true']");
assertXPath(pXmlDoc, sPathStart + "[@draw:name='controls' and @draw:display='screen']");
assertXPath(pXmlDoc, sPathStart + "[@draw:name='measurelines' and @draw:display='printer']");
// Verify, that the saved document has no layer items in settings.xml
xmlDocUniquePtr pXmlDoc2 = parseExport(u"settings.xml"_ustr);
CPPUNIT_ASSERT_MESSAGE("Failed to get 'settings.xml'", pXmlDoc2);
static constexpr OString sPathStart2("/office:document-settings/office:settings/"
"config:config-item-set[@config:name='ooo:view-settings']/"
"config:config-item-map-indexed[@config:name='Views']/"
"config:config-item-map-entry"_ostr);
assertXPath(pXmlDoc2, sPathStart2 + "/config:config-item[@config:name='VisibleLayers']", 0);
assertXPath(pXmlDoc2, sPathStart2 + "/config:config-item[@config:name='PrintableLayers']", 0);
assertXPath(pXmlDoc2, sPathStart2 + "/config:config-item[@config:name='LockedLayers']", 0);
}
void SdMiscTest::testTdf101242_settings_keep()
{
// Loads a document, which has the visible/printable/locked information for layers
// only in the config items in settings.xml. That is the case for all old documents.
// The resaved document should have the ODF attributes draw:display and draw:protected
// and should still have these config items in settings.xml.
createSdDrawDoc("tdf101242_settings.odg");
// Saving including items in settings.xml
std::shared_ptr<comphelper::ConfigurationChanges> pBatch(
comphelper::ConfigurationChanges::create());
officecfg::Office::Common::Misc::WriteLayerStateAsConfigItem::set(true, pBatch);
pBatch->commit();
save(u"draw8"_ustr);
// Verify, that the saved document has the ODF attributes
xmlDocUniquePtr pXmlDoc = parseExport(u"styles.xml"_ustr);
CPPUNIT_ASSERT_MESSAGE("Failed to get 'styles.xml'", pXmlDoc);
static constexpr OString sPathStart(
"/office:document-styles/office:master-styles/draw:layer-set/draw:layer"_ostr);
assertXPath(pXmlDoc,
sPathStart + "[@draw:name='backgroundobjects' and @draw:protected='true']");
assertXPath(pXmlDoc, sPathStart + "[@draw:name='controls' and @draw:display='screen']");
assertXPath(pXmlDoc, sPathStart + "[@draw:name='measurelines' and @draw:display='printer']");
// Verify, that the saved document still has the items in settings.xml
xmlDocUniquePtr pXmlDoc2 = parseExport(u"settings.xml"_ustr);
CPPUNIT_ASSERT_MESSAGE("Failed to get 'settings.xml'", pXmlDoc2);
static constexpr OString sPathStart2("/office:document-settings/office:settings/"
"config:config-item-set[@config:name='ooo:view-settings']/"
"config:config-item-map-indexed[@config:name='Views']/"
"config:config-item-map-entry"_ostr);
// Value is a bitfield with first Byte in order '* * * measurelines controls backgroundobjects background layout'
// The first three bits depend on initialization and may change. The values in file are Base64 encoded.
OUString sBase64;
uno::Sequence<sal_Int8> aDecodedSeq;
sBase64 = getXPathContent(pXmlDoc2,
sPathStart2 + "/config:config-item[@config:name='VisibleLayers']");
CPPUNIT_ASSERT_MESSAGE("Item VisibleLayers does not exists.", !sBase64.isEmpty());
comphelper::Base64::decode(aDecodedSeq, sBase64);
CPPUNIT_ASSERT_EQUAL(0x0F, static_cast<sal_uInt8>(aDecodedSeq[0]) & 0x1F);
sBase64 = getXPathContent(pXmlDoc2,
sPathStart2 + "/config:config-item[@config:name='PrintableLayers']");
CPPUNIT_ASSERT_MESSAGE("Item PrintableLayers does not exists.", !sBase64.isEmpty());
comphelper::Base64::decode(aDecodedSeq, sBase64);
CPPUNIT_ASSERT_EQUAL(0x17, static_cast<sal_uInt8>(aDecodedSeq[0]) & 0x1F);
sBase64 = getXPathContent(pXmlDoc2,
sPathStart2 + "/config:config-item[@config:name='LockedLayers']");
CPPUNIT_ASSERT_MESSAGE("Item LockedLayers does not exists.", !sBase64.isEmpty());
comphelper::Base64::decode(aDecodedSeq, sBase64);
CPPUNIT_ASSERT_EQUAL(0x04, static_cast<sal_uInt8>(aDecodedSeq[0]) & 0x1F);
}
void SdMiscTest::testTdf101242_settings_remove()
{
// Loads a document, which has the visible/printable/locked information for layers
// only in the config items in settings.xml. That is the case for all old documents.
// The resaved document should have only the ODF attributes draw:display and draw:protected
// and should have no config items in settings.xml.
createSdDrawDoc("tdf101242_settings.odg");
// Saving without config items in settings.xml
std::shared_ptr<comphelper::ConfigurationChanges> pBatch(
comphelper::ConfigurationChanges::create());
officecfg::Office::Common::Misc::WriteLayerStateAsConfigItem::set(false, pBatch);
pBatch->commit();
save(u"draw8"_ustr);
// Verify, that the saved document has the ODF attributes
xmlDocUniquePtr pXmlDoc = parseExport(u"styles.xml"_ustr);
CPPUNIT_ASSERT_MESSAGE("Failed to get 'styles.xml'", pXmlDoc);
static constexpr OString sPathStart(
"/office:document-styles/office:master-styles/draw:layer-set/draw:layer"_ostr);
assertXPath(pXmlDoc,
sPathStart + "[@draw:name='backgroundobjects' and @draw:protected='true']");
assertXPath(pXmlDoc, sPathStart + "[@draw:name='controls' and @draw:display='screen']");
assertXPath(pXmlDoc, sPathStart + "[@draw:name='measurelines' and @draw:display='printer']");
// Verify, that the saved document has no layer items in settings.xml
xmlDocUniquePtr pXmlDoc2 = parseExport(u"settings.xml"_ustr);
CPPUNIT_ASSERT_MESSAGE("Failed to get 'settings.xml'", pXmlDoc2);
static constexpr OString sPathStart2("/office:document-settings/office:settings/"
"config:config-item-set[@config:name='ooo:view-settings']/"
"config:config-item-map-indexed[@config:name='Views']/"
"config:config-item-map-entry"_ostr);
assertXPath(pXmlDoc2, sPathStart2 + "/config:config-item[@config:name='VisibleLayers']", 0);
assertXPath(pXmlDoc2, sPathStart2 + "/config:config-item[@config:name='PrintableLayers']", 0);
assertXPath(pXmlDoc2, sPathStart2 + "/config:config-item[@config:name='LockedLayers']", 0);
}
void SdMiscTest::testTdf119392()
{
// Loads a document which has two user layers "V--" and "V-L". Inserts a new layer "-P-" between them.
// Checks, that the bitfields in the saved file have the bits in the correct order, in case
// option WriteLayerAsConfigItem is true and the config items are written.
std::shared_ptr<comphelper::ConfigurationChanges> batch(
comphelper::ConfigurationChanges::create());
officecfg::Office::Common::Misc::WriteLayerStateAsConfigItem::set(true, batch);
batch->commit();
createSdDrawDoc("tdf119392_InsertLayer.odg");
SdXImpressDocument* pXImpressDocument = dynamic_cast<SdXImpressDocument*>(mxComponent.get());
CPPUNIT_ASSERT(pXImpressDocument);
// Insert layer "-P-", not visible, printable, not locked
sd::ViewShell* pViewShell = pXImpressDocument->GetDocShell()->GetViewShell();
SdrView* pView = pViewShell->GetView();
pView->InsertNewLayer(u"-P-"_ustr, 6); // 0..4 standard layer, 5 layer "V--"
SdrPageView* pPageView = pView->GetSdrPageView();
pPageView->SetLayerVisible(u"-P-"_ustr, false);
pPageView->SetLayerPrintable(u"-P-"_ustr, true);
pPageView->SetLayerLocked(u"-P-"_ustr, false);
save(u"draw8"_ustr);
// Verify correct bit order in bitfield in the config items in settings.xml
xmlDocUniquePtr pXmlDoc = parseExport(u"settings.xml"_ustr);
CPPUNIT_ASSERT_MESSAGE("Failed to get 'settings.xml'", pXmlDoc);
static constexpr OString sPathStart("/office:document-settings/office:settings/"
"config:config-item-set[@config:name='ooo:view-settings']/"
"config:config-item-map-indexed[@config:name='Views']/"
"config:config-item-map-entry"_ostr);
// First Byte is in order 'V-L -P- V-- measurelines controls backgroundobjects background layout'
// Bits need to be: visible=10111111=0xbf=191 printable=01011111=0x5f=95 locked=10000000=0x80=128
// The values in file are Base64 encoded.
OUString sBase64;
uno::Sequence<sal_Int8> aDecodedSeq;
sBase64 = getXPathContent(pXmlDoc,
sPathStart + "/config:config-item[@config:name='VisibleLayers']");
CPPUNIT_ASSERT_MESSAGE("Item VisibleLayers does not exists.", !sBase64.isEmpty());
comphelper::Base64::decode(aDecodedSeq, sBase64);
CPPUNIT_ASSERT_EQUAL(0xbF,
static_cast<sal_uInt8>(aDecodedSeq[0])
& 0xff); // & 0xff forces unambiguous types for CPPUNIT_ASSERT_EQUAL
sBase64 = getXPathContent(pXmlDoc,
sPathStart + "/config:config-item[@config:name='PrintableLayers']");
CPPUNIT_ASSERT_MESSAGE("Item PrintableLayers does not exists.", !sBase64.isEmpty());
comphelper::Base64::decode(aDecodedSeq, sBase64);
CPPUNIT_ASSERT_EQUAL(0x5f, static_cast<sal_uInt8>(aDecodedSeq[0]) & 0xff);
sBase64
= getXPathContent(pXmlDoc, sPathStart + "/config:config-item[@config:name='LockedLayers']");
CPPUNIT_ASSERT_MESSAGE("Item LockedLayers does not exists.", !sBase64.isEmpty());
comphelper::Base64::decode(aDecodedSeq, sBase64);
CPPUNIT_ASSERT_EQUAL(0x80, static_cast<sal_uInt8>(aDecodedSeq[0]) & 0xff);
}
void SdMiscTest::testTdf67248()
{
// The document tdf67248.odg has been created with a German UI. It has a user layer named "Background".
// On opening the user layer must still exists. The error was, that it was merged into the standard
// layer "background".
createSdDrawDoc("tdf67248.odg");
SdXImpressDocument* pXImpressDocument = dynamic_cast<SdXImpressDocument*>(mxComponent.get());
CPPUNIT_ASSERT(pXImpressDocument);
SdDrawDocument* pDoc = pXImpressDocument->GetDoc();
SdrLayerAdmin& rLayerAdmin = pDoc->GetLayerAdmin();
CPPUNIT_ASSERT_EQUAL(sal_uInt16(6), rLayerAdmin.GetLayerCount());
}
void SdMiscTest::testTdf119956()
{
createSdDrawDoc("tdf119956.odg");
SdXImpressDocument* pXImpressDocument = dynamic_cast<SdXImpressDocument*>(mxComponent.get());
CPPUNIT_ASSERT(pXImpressDocument);
sd::ViewShell* pViewShell = pXImpressDocument->GetDocShell()->GetViewShell();
sd::GraphicViewShell* pGraphicViewShell = static_cast<sd::GraphicViewShell*>(pViewShell);
CPPUNIT_ASSERT(pGraphicViewShell);
sd::LayerTabBar* pLayerTabBar = pGraphicViewShell->GetLayerTabControl();
CPPUNIT_ASSERT(pLayerTabBar);
pLayerTabBar->StateChanged(StateChangedType::InitShow);
// Alt+Click sets a tab in edit mode, so that you can rename it.
// The error was, that Alt+Click on a tab, which was not the current tab, did not set the clicked tab
// as current tab. As a result, the entered text was applied to the wrong tab.
// The test document has the layer tabs "layout", "controls", "measurelines" and "Layer4" in this order
// The "pagePos" is 0, 1, 2, 3
// Make sure, that tab "layout" is the current tab.
MouseEvent aSyntheticMouseEvent;
if (pLayerTabBar->GetCurPagePos() != 0)
{
sal_uInt16 nIdOfTabPos0(pLayerTabBar->GetPageId(0));
tools::Rectangle aTabPos0Rect(pLayerTabBar->GetPageRect(nIdOfTabPos0));
aSyntheticMouseEvent
= MouseEvent(aTabPos0Rect.Center(), 1, MouseEventModifiers::SYNTHETIC, MOUSE_LEFT, 0);
pLayerTabBar->MouseButtonDown(aSyntheticMouseEvent);
}
CPPUNIT_ASSERT_EQUAL(sal_uInt16(0), pLayerTabBar->GetCurPagePos());
// Alt+Click on tab "Layer4"
sal_uInt16 nIdOfTabPos3(pLayerTabBar->GetPageId(3));
tools::Rectangle aTabPos3Rect(pLayerTabBar->GetPageRect(nIdOfTabPos3));
aSyntheticMouseEvent = MouseEvent(aTabPos3Rect.Center(), 1, MouseEventModifiers::SYNTHETIC,
MOUSE_LEFT, KEY_MOD2);
pLayerTabBar->MouseButtonDown(aSyntheticMouseEvent);
// Make sure, tab 3 is current tab now.
CPPUNIT_ASSERT_EQUAL(sal_uInt16(3), pLayerTabBar->GetCurPagePos());
}
void SdMiscTest::testTdf98839_ShearVFlipH()
{
// Loads a document with a sheared shape and mirrors it
createSdDrawDoc("tdf98839_ShearVFlipH.odg");
SdXImpressDocument* pXImpressDocument = dynamic_cast<SdXImpressDocument*>(mxComponent.get());
CPPUNIT_ASSERT(pXImpressDocument);
sd::ViewShell* pViewShell = pXImpressDocument->GetDocShell()->GetViewShell();
SdPage* pPage = pViewShell->GetActualPage();
SdrObjCustomShape* pShape = static_cast<SdrObjCustomShape*>(pPage->GetObj(0));
pShape->Mirror(Point(4000, 2000), Point(4000, 10000));
// Save and examine attribute draw:transform
save(u"draw8"_ustr);
xmlDocUniquePtr pXmlDoc = parseExport(u"content.xml"_ustr);
CPPUNIT_ASSERT_MESSAGE("Failed to get 'content.xml'", pXmlDoc);
static constexpr OString sPathStart(
"/office:document-content/office:body/office:drawing/draw:page"_ostr);
assertXPath(pXmlDoc, sPathStart);
const OUString sTransform = getXPath(pXmlDoc, sPathStart + "/draw:custom-shape", "transform");
// Error was, that the shear angle had a wrong sign.
CPPUNIT_ASSERT_MESSAGE("expected: draw:transform='skewX (-0.64350...)",
sTransform.startsWith("skewX (-"));
}
void SdMiscTest::testTdf130988()
{
createSdDrawDoc("tdf130988_3D_create_lathe.odg");
SdXImpressDocument* pXImpressDocument = dynamic_cast<SdXImpressDocument*>(mxComponent.get());
CPPUNIT_ASSERT(pXImpressDocument);
//emulate command .uno:ConvertInto3DLathe
sd::ViewShell* pViewShell = pXImpressDocument->GetDocShell()->GetViewShell();
E3dView* pView = pViewShell->GetView();
pView->MarkNextObj();
pView->ConvertMarkedObjTo3D(false, basegfx::B2DPoint(8000.0, -3000.0),
basegfx::B2DPoint(3000.0, -8000.0));
E3dScene* pObj
= dynamic_cast<E3dScene*>(pView->GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj());
CPPUNIT_ASSERT(pObj);
// Error was, that the created 3D object had a wrong path. Instead examining
// the path directly, I use the scene distance, because that is easier. The
// scene distance is calculated from the object while creating.
const double fDistance = pObj->GetDistance();
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("D3DSceneDistance", 7071.0, fDistance, 0.5);
}
void SdMiscTest::testTdf131033()
{
createSdDrawDoc("tdf131033_3D_SceneSizeIn2d.odg");
SdXImpressDocument* pXImpressDocument = dynamic_cast<SdXImpressDocument*>(mxComponent.get());
CPPUNIT_ASSERT(pXImpressDocument);
// The document contains a polygon, so that emulate command .uno:ConvertInto3DLathe
// by direct call of ConvertMarkedObjTo3D works.
// It produces a rotation around a vertical axis, which is far away from the
// generating shape.
sd::ViewShell* pViewShell = pXImpressDocument->GetDocShell()->GetViewShell();
E3dView* pView = pViewShell->GetView();
pView->MarkNextObj();
pView->ConvertMarkedObjTo3D(false, basegfx::B2DPoint(11000.0, -5000.0),
basegfx::B2DPoint(11000.0, -9000.0));
E3dScene* pObj
= dynamic_cast<E3dScene*>(pView->GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj());
CPPUNIT_ASSERT(pObj);
// Error was, that the 2D representation of the scene did not contain the default 20°
// rotation of the new scene around x-axis and therefore was not high enough.
const double fSnapRectHeight = pObj->GetSnapRect().getOpenHeight();
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("2D height", 7096.0, fSnapRectHeight, 1.0);
}
void SdMiscTest::testTdf129898LayerDrawnInSlideshow()
{
// Versions LO 6.2 to 6.4 have produced files, where the layer DrawnInSlideshow has
// got visible=false and printable=false attributes. Those files should be repaired now.
createSdImpressDoc("tdf129898_faulty_DrawnInSlideshow.odp");
SdXImpressDocument* pXImpressDocument = dynamic_cast<SdXImpressDocument*>(mxComponent.get());
CPPUNIT_ASSERT(pXImpressDocument);
SdDrawDocument* pDoc = pXImpressDocument->GetDoc();
// Verify model
static constexpr OUString sName = u"DrawnInSlideshow"_ustr;
SdrLayerAdmin& rLayerAdmin = pDoc->GetLayerAdmin();
SdrLayer* pLayer = rLayerAdmin.GetLayer(sName);
CPPUNIT_ASSERT_MESSAGE("No layer DrawnInSlideshow", pLayer);
CPPUNIT_ASSERT(pLayer->IsVisibleODF());
CPPUNIT_ASSERT(pLayer->IsPrintableODF());
// Verify view
sd::ViewShell* pViewShell = pXImpressDocument->GetDocShell()->GetViewShell();
SdrPageView* pPageView = pViewShell->GetView()->GetSdrPageView();
CPPUNIT_ASSERT(pPageView->IsLayerVisible(sName));
CPPUNIT_ASSERT(pPageView->IsLayerPrintable(sName));
}
void SdMiscTest::testTdf136956()
{
createSdImpressDoc("odp/cellspan.odp");
SdXImpressDocument* pXImpressDocument = dynamic_cast<SdXImpressDocument*>(mxComponent.get());
CPPUNIT_ASSERT(pXImpressDocument);
SdDrawDocument* pDoc = pXImpressDocument->GetDoc();
const SdrPage* pPage = pDoc->GetPage(1);
sdr::table::SdrTableObj* pTableObj = dynamic_cast<sdr::table::SdrTableObj*>(pPage->GetObj(0));
CPPUNIT_ASSERT(pTableObj);
uno::Reference<table::XTable> xTable(pTableObj->getTable(), uno::UNO_SET_THROW);
uno::Reference<css::table::XMergeableCellRange> xRange(
xTable->createCursorByRange(xTable->getCellRangeByPosition(0, 0, 3, 2)),
uno::UNO_QUERY_THROW);
// 4x3 Table before merge.
CPPUNIT_ASSERT_EQUAL(sal_Int32(4), xTable->getColumnCount());
CPPUNIT_ASSERT_EQUAL(sal_Int32(3), xTable->getRowCount());
xRange->merge();
// 1x1 Table after merge.
CPPUNIT_ASSERT_EQUAL(sal_Int32(1), xTable->getColumnCount());
CPPUNIT_ASSERT_EQUAL(sal_Int32(1), xTable->getRowCount());
pXImpressDocument->GetDocShell()->GetUndoManager()->Undo();
// 4x3 Table after undo. Undo crashed before.
CPPUNIT_ASSERT_EQUAL(sal_Int32(4), xTable->getColumnCount());
CPPUNIT_ASSERT_EQUAL(sal_Int32(3), xTable->getRowCount());
}
void SdMiscTest::testTdf39519()
{
createSdImpressDoc();
SdXImpressDocument* pXImpressDocument = dynamic_cast<SdXImpressDocument*>(mxComponent.get());
CPPUNIT_ASSERT(pXImpressDocument);
// Change the name of the first page in the newly created document
SdDrawDocument* pDoc = pXImpressDocument->GetDoc();
SdPage* pPage = static_cast<SdPage*>(pDoc->GetPage(1));
pPage->SetName(u"Test"_ustr);
// Insert a bookmark as a new page using the same name
std::vector<OUString> aBookmarkList = { u"Test"_ustr };
pDoc->InsertBookmarkAsPage(aBookmarkList, nullptr, false, false, 2, true, pDoc->GetDocSh(),
true, false, false);
// Check if the copied page has a different name
SdPage* pCopiedPage = static_cast<SdPage*>(pDoc->GetPage(2));
// Without the fix in place, the names of the pages would not be different
CPPUNIT_ASSERT(pCopiedPage->GetName() != pPage->GetName());
}
void SdMiscTest::testTdf164284()
{
createSdImpressDoc();
SdXImpressDocument* pXImpressDocument = dynamic_cast<SdXImpressDocument*>(mxComponent.get());
CPPUNIT_ASSERT(pXImpressDocument);
// Change the name of the first page in the newly created document
SdDrawDocument* pDoc = pXImpressDocument->GetDoc();
SdPage* pPage = static_cast<SdPage*>(pDoc->GetPage(1));
pPage->SetName(u"Test"_ustr);
// Move a bookmark as a page using the same name
pDoc->DoMakePageObjectsNamesUnique(false);
std::vector<OUString> aBookmarkList = { u"Test"_ustr };
pDoc->InsertBookmarkAsPage(aBookmarkList, nullptr, false, false, 2, true, pDoc->GetDocSh(),
true, false, false);
// Check if the moved page has the same name
SdPage* pMovedPage = static_cast<SdPage*>(pDoc->GetPage(2));
// Without the fix in place, the names of the pages would be different
CPPUNIT_ASSERT_EQUAL(pPage->GetName(), pMovedPage->GetName());
}
void SdMiscTest::testEncodedTableStyles()
{
// Silence unrelated failure:
// Error: element "table:table-template" is missing "first-row-start-column" attribute
skipValidation();
createSdDrawDoc();
{
uno::Reference<style::XStyleFamiliesSupplier> xStyleFamiliesSupplier(mxComponent,
uno::UNO_QUERY_THROW);
uno::Reference<css::lang::XSingleServiceFactory> xTableStyleFamily(
xStyleFamiliesSupplier->getStyleFamilies()->getByName(u"table"_ustr),
uno::UNO_QUERY_THROW);
uno::Reference<css::lang::XSingleServiceFactory> xCellStyleFamily(
xStyleFamiliesSupplier->getStyleFamilies()->getByName(u"cell"_ustr),
uno::UNO_QUERY_THROW);
uno::Reference<style::XStyle> xTableStyle(xTableStyleFamily->createInstance(),
uno::UNO_QUERY_THROW);
uno::Reference<style::XStyle> xCellStyle(xCellStyleFamily->createInstance(),
uno::UNO_QUERY_THROW);
uno::Reference<container::XNameContainer>(xTableStyleFamily, uno::UNO_QUERY_THROW)
->insertByName(u"table_1"_ustr, uno::Any(xTableStyle));
uno::Reference<container::XNameContainer>(xCellStyleFamily, uno::UNO_QUERY_THROW)
->insertByName(u"table-body_1"_ustr, uno::Any(xCellStyle));
uno::Reference<container::XNameReplace>(xTableStyle, uno::UNO_QUERY_THROW)
->replaceByName(u"body"_ustr, uno::Any(xCellStyle));
}
saveAndReload(u"draw8"_ustr);
{
uno::Reference<style::XStyleFamiliesSupplier> xStyleFamiliesSupplier(mxComponent,
uno::UNO_QUERY_THROW);
uno::Reference<container::XNameAccess> xTableStyleFamily(
xStyleFamiliesSupplier->getStyleFamilies()->getByName(u"table"_ustr),
uno::UNO_QUERY_THROW);
// Such style used to be exported as "table_5f_1" instead.
CPPUNIT_ASSERT(xTableStyleFamily->hasByName(u"table_1"_ustr));
uno::Reference<container::XNameAccess> xTableStyle(
xTableStyleFamily->getByName(u"table_1"_ustr), uno::UNO_QUERY_THROW);
uno::Reference<style::XStyle> xCellStyle(xTableStyle->getByName(u"body"_ustr),
uno::UNO_QUERY);
// Such style used to not be found by the table style, as it was
// searching for "table-body_5f_1" instead of "table-body_1".
CPPUNIT_ASSERT(xCellStyle.is());
CPPUNIT_ASSERT_EQUAL(u"table-body_1"_ustr, xCellStyle->getName());
}
}
void SdMiscTest::testTdf157117()
{
createSdImpressDoc();
SdXImpressDocument* pXImpressDocument = dynamic_cast<SdXImpressDocument*>(mxComponent.get());
CPPUNIT_ASSERT(pXImpressDocument);
sd::ViewShell* pViewShell = pXImpressDocument->GetDocShell()->GetViewShell();
// insert two pages to make a total of 3 pages
dispatchCommand(mxComponent, u".uno:InsertPage"_ustr, {});
dispatchCommand(mxComponent, u".uno:InsertPage"_ustr, {});
// assert the document has 3 standard pages
SdDrawDocument* pDocument = pXImpressDocument->GetDoc();
CPPUNIT_ASSERT_EQUAL(sal_uInt16(3), pDocument->GetSdPageCount(PageKind::Standard));
// alternate page insert method
// uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY);
// uno::Reference<drawing::XDrawPages> xDrawPages = xDrawPagesSupplier->getDrawPages();
// xDrawPages->insertNewByIndex(0);
// xDrawPages->insertNewByIndex(0);
// CPPUNIT_ASSERT_EQUAL(xDrawPages->getCount(), 3);
// move to the last page
dispatchCommand(mxComponent, u".uno:LastPage"_ustr, {});
SdPage* pPage = pViewShell->GetActualPage();
auto nPageNum = pPage->GetPageNum();
// assert move to last page
CPPUNIT_ASSERT_EQUAL(2, (nPageNum - 1) / 2);
// delete the last page
dispatchCommand(mxComponent, u".uno:DeletePage"_ustr, {});
pPage = pViewShell->GetActualPage();
nPageNum = pPage->GetPageNum();
// Check that the new last page is moved to. Before, the first page was always moved to when
// the last page was deleted.
CPPUNIT_ASSERT_EQUAL(1, (nPageNum - 1) / 2);
}
CPPUNIT_TEST_SUITE_REGISTRATION(SdMiscTest);
CPPUNIT_PLUGIN_IMPLEMENT();
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
View git blame Copy permalink