1
0
Fork 0
libreoffice/sw/source/ui/envelp/envprt.cxx
Daniel Baumann 8e63e14cf6
Adding upstream version 4:25.2.3.
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
2025-06-22 16:20:04 +02:00

190 lines
6.2 KiB
C++

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <vcl/print.hxx>
#include <svtools/prnsetup.hxx>
#include <svtools/unitconv.hxx>
#include <cmdid.h>
#include "envprt.hxx"
#include <envlop.hxx>
#include <uitool.hxx>
SwEnvPrtPage::SwEnvPrtPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rSet)
: SfxTabPage(pPage, pController, u"modules/swriter/ui/envprinterpage.ui"_ustr, u"EnvPrinterPage"_ustr, &rSet)
, m_xUpper(m_xBuilder->weld_widget(u"upper"_ustr))
, m_xLower(m_xBuilder->weld_widget(u"lower"_ustr))
, m_xTopButton(m_xBuilder->weld_radio_button(u"top"_ustr))
, m_xBottomButton(m_xBuilder->weld_radio_button(u"bottom"_ustr))
, m_xRightField(m_xBuilder->weld_metric_spin_button(u"right"_ustr, FieldUnit::CM))
, m_xDownField(m_xBuilder->weld_metric_spin_button(u"down"_ustr, FieldUnit::CM))
, m_xPrinterInfo(m_xBuilder->weld_label(u"printername"_ustr))
, m_xPrtSetup(m_xBuilder->weld_button(u"setup"_ustr))
, m_aIdsL { m_xBuilder->weld_radio_button(u"horileftl"_ustr),
m_xBuilder->weld_radio_button(u"horicenterl"_ustr),
m_xBuilder->weld_radio_button(u"horirightl"_ustr),
m_xBuilder->weld_radio_button(u"vertleftl"_ustr),
m_xBuilder->weld_radio_button(u"vertcenterl"_ustr),
m_xBuilder->weld_radio_button(u"vertrightl"_ustr) }
, m_aIdsU { m_xBuilder->weld_radio_button(u"horileftu"_ustr),
m_xBuilder->weld_radio_button(u"horicenteru"_ustr),
m_xBuilder->weld_radio_button(u"horirightu"_ustr),
m_xBuilder->weld_radio_button(u"vertleftu"_ustr),
m_xBuilder->weld_radio_button(u"vertcenteru"_ustr),
m_xBuilder->weld_radio_button(u"vertrightu"_ustr) }
{
SetExchangeSupport();
// Metrics
FieldUnit eUnit = ::GetDfltMetric(false);
::SetFieldUnit(*m_xRightField, eUnit);
::SetFieldUnit(*m_xDownField, eUnit);
// Install handlers
m_xTopButton->connect_toggled(LINK(this, SwEnvPrtPage, ClickHdl));
m_xBottomButton->connect_toggled(LINK(this, SwEnvPrtPage, ClickHdl));
m_xPrtSetup->connect_clicked(LINK(this, SwEnvPrtPage, ButtonHdl));
for (auto& a : m_aIdsL)
a->connect_toggled(LINK(this, SwEnvPrtPage, LowerHdl));
for (auto& a : m_aIdsU)
a->connect_toggled(LINK(this, SwEnvPrtPage, UpperHdl));
// Bitmaps
ClickHdl(*m_xBottomButton);
}
SwEnvPrtPage::~SwEnvPrtPage()
{
m_xPrt.clear();
}
IMPL_LINK_NOARG(SwEnvPrtPage, ClickHdl, weld::Toggleable&, void)
{
// Envelope from bottom, otherwise Envelope from top
const bool bLowerActive = m_xBottomButton->get_active();
m_xUpper->set_visible(!bLowerActive);
m_xLower->set_visible(bLowerActive);
}
IMPL_LINK(SwEnvPrtPage, LowerHdl, weld::Toggleable&, rButton, void)
{
for (int i = ENV_HOR_LEFT; i <= ENV_VER_RGHT; ++i)
{
if (&rButton == m_aIdsL[i].get())
{
m_aIdsU[i]->set_active(m_aIdsL[i]->get_active());
break;
}
}
}
IMPL_LINK(SwEnvPrtPage, UpperHdl, weld::Toggleable&, rButton, void)
{
for (int i = ENV_HOR_LEFT; i <= ENV_VER_RGHT; ++i)
{
if (&rButton == m_aIdsU[i].get())
{
m_aIdsL[i]->set_active(m_aIdsU[i]->get_active());
break;
}
}
}
IMPL_LINK(SwEnvPrtPage, ButtonHdl, weld::Button&, rBtn, void)
{
if (&rBtn == m_xPrtSetup.get())
{
// Call printer setup
if (m_xPrt)
{
PrinterSetupDialog aDlg(GetFrameWeld());
aDlg.SetPrinter(m_xPrt);
aDlg.run();
rBtn.grab_focus();
m_xPrinterInfo->set_label(m_xPrt->GetName());
}
}
}
std::unique_ptr<SfxTabPage> SwEnvPrtPage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rSet)
{
return std::make_unique<SwEnvPrtPage>(pPage, pController, *rSet);
}
void SwEnvPrtPage::ActivatePage(const SfxItemSet&)
{
if (m_xPrt)
m_xPrinterInfo->set_label(m_xPrt->GetName());
}
DeactivateRC SwEnvPrtPage::DeactivatePage(SfxItemSet* _pSet)
{
if( _pSet )
FillItemSet(_pSet);
return DeactivateRC::LeavePage;
}
void SwEnvPrtPage::FillItem(SwEnvItem& rItem)
{
int nOrient = 0;
for (int i = ENV_HOR_LEFT; i <= ENV_VER_RGHT; ++i)
{
assert(m_aIdsL[i]->get_active() == m_aIdsU[i]->get_active());
if (m_aIdsL[i]->get_active())
{
nOrient = i;
break;
}
}
rItem.m_eAlign = static_cast<SwEnvAlign>(nOrient);
rItem.m_bPrintFromAbove = m_xTopButton->get_active();
rItem.m_nShiftRight = getfieldval(*m_xRightField);
rItem.m_nShiftDown = getfieldval(*m_xDownField);
}
bool SwEnvPrtPage::FillItemSet(SfxItemSet* rSet)
{
FillItem(GetParentSwEnvDlg()->m_aEnvItem);
rSet->Put(GetParentSwEnvDlg()->m_aEnvItem);
return true;
}
void SwEnvPrtPage::Reset(const SfxItemSet* rSet)
{
// Read item
const SwEnvItem& rItem = static_cast<const SwEnvItem&>( rSet->Get(FN_ENVELOP) );
m_aIdsL[rItem.m_eAlign]->set_active(true);
m_aIdsU[rItem.m_eAlign]->set_active(true);
if (rItem.m_bPrintFromAbove)
m_xTopButton->set_active(true);
else
m_xBottomButton->set_active(true);
setfieldval(*m_xRightField, rItem.m_nShiftRight);
setfieldval(*m_xDownField , rItem.m_nShiftDown );
ActivatePage(*rSet);
ClickHdl(*m_xTopButton);
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */