Adding upstream version 2:9.1.1230.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

.appveyor.yml

@@ -0,0 +1,52 @@
+version: "{build}"
+
+image: Visual Studio 2015
+
+skip_tags: true
+
+environment:
+  matrix:
+    - FEATURE: HUGE
+  
+    # Alternate environments, not used right now.  2022 is a lot slower.
+    #
+    # - job_name: VS-2015
+    #   appveyor_build_worker_image: Visual Studio 2015
+    #   FEATURE: HUGE
+
+    # - job_name: VS-2017
+    #   appveyor_build_worker_image: Visual Studio 2017
+    #   FEATURE: HUGE
+
+    # - job_name: VS-2019
+    #   appveyor_build_worker_image: Visual Studio 2019
+    #   FEATURE: HUGE
+
+    # - job_name: VS-2022
+    #   appveyor_build_worker_image: Visual Studio 2022
+    #   FEATURE: HUGE
+
+# disabled
+#    - FEATURE: TINY
+#    - FEATURE: NORMAL
+
+matrix:
+  fast_finish: true
+
+before_build:
+  - call ver
+  - ci\appveyor.bat install
+
+build_script:
+  - ci\appveyor.bat build
+
+test_script:
+  - ci\appveyor.bat test
+
+artifacts:
+  - path: src/vim.exe
+    name: vim
+  - path: src/gvim.exe
+    name: gvim
+
+# vim: sw=2 sts=2 et ts=8 sr

.cirrus.yml

@@ -0,0 +1,31 @@
+env:
+  CIRRUS_CLONE_DEPTH: 3
+  FEATURES: huge
+
+freebsd_task:
+  name: FreeBSD
+  matrix:
+    - name: FreeBSD 14.2
+      freebsd_instance:
+        image_family: freebsd-14-2
+  timeout_in: 20m
+  install_script:
+    - pkg install -y gettext
+  build_script:
+    - NPROC=$(getconf _NPROCESSORS_ONLN)
+    - ./configure --with-features=${FEATURES}
+    - make -j${NPROC}
+  test_script:
+    - src/vim --version
+      # run tests as user "cirrus" instead of root
+    - pw useradd cirrus -m
+    - chown -R cirrus:cirrus .
+    - sudo -u cirrus make test
+  on_failure:
+    test_artifacts:
+      name: "Cirrus-CI-freebsd-failed-tests"
+      path: |
+        runtime/indent/testdir/*.fail
+        runtime/syntax/testdir/failed/*
+        src/testdir/failed/*
+      type: application/octet-stream

.clang-format

@@ -0,0 +1,254 @@
+---
+Language: Cpp
+AccessModifierOffset: -4
+AlignAfterOpenBracket: Align
+AlignArrayOfStructures: None
+AlignConsecutiveAssignments:
+  Enabled: false
+  AcrossEmptyLines: false
+  AcrossComments: false
+  AlignCompound: false
+  AlignFunctionPointers: false
+  PadOperators: false
+AlignConsecutiveBitFields:
+  Enabled: false
+  AcrossEmptyLines: false
+  AcrossComments: false
+  AlignCompound: false
+  AlignFunctionPointers: false
+  PadOperators: false
+AlignConsecutiveDeclarations:
+  Enabled: false
+  AcrossEmptyLines: false
+  AcrossComments: false
+  AlignCompound: false
+  AlignFunctionPointers: false
+  PadOperators: false
+AlignConsecutiveMacros:
+  Enabled: false
+  AcrossEmptyLines: false
+  AcrossComments: false
+  AlignCompound: false
+  AlignFunctionPointers: false
+  PadOperators: false
+AlignConsecutiveShortCaseStatements:
+  Enabled: false
+  AcrossEmptyLines: false
+  AcrossComments: false
+  AlignCaseColons: false
+AlignEscapedNewlines: DontAlign
+AlignOperands: Align
+AlignTrailingComments:
+  Kind: Leave
+  OverEmptyLines: 0
+AllowAllArgumentsOnNextLine: false
+AllowAllParametersOfDeclarationOnNextLine: false
+AllowBreakBeforeNoexceptSpecifier: Never
+AllowShortBlocksOnASingleLine: Never
+AllowShortCaseLabelsOnASingleLine: false
+AllowShortCompoundRequirementOnASingleLine: true
+AllowShortEnumsOnASingleLine: false
+AllowShortFunctionsOnASingleLine: None
+AllowShortIfStatementsOnASingleLine: Never
+AllowShortLambdasOnASingleLine: None
+AllowShortLoopsOnASingleLine: false
+AlwaysBreakAfterDefinitionReturnType: All
+AlwaysBreakAfterReturnType: AllDefinitions
+AlwaysBreakBeforeMultilineStrings: false
+AlwaysBreakTemplateDeclarations: MultiLine
+BinPackArguments: true
+BinPackParameters: false
+BitFieldColonSpacing: Both
+BraceWrapping:
+  AfterCaseLabel: true
+  AfterClass: true
+  AfterControlStatement: Always
+  AfterEnum: true
+  AfterExternBlock: true
+  AfterFunction: true
+  AfterNamespace: true
+  AfterObjCDeclaration: true
+  AfterStruct: true
+  AfterUnion: true
+  BeforeCatch: true
+  BeforeElse: true
+  BeforeLambdaBody: false
+  BeforeWhile: true
+  IndentBraces: false
+  SplitEmptyFunction: true
+  SplitEmptyRecord: true
+  SplitEmptyNamespace: true
+BreakAdjacentStringLiterals: true
+BreakAfterAttributes: Leave
+BreakAfterJavaFieldAnnotations: false
+BreakArrays: true
+BreakBeforeBinaryOperators: None
+BreakBeforeConceptDeclarations: Always
+BreakBeforeBraces: Custom
+BreakBeforeInlineASMColon: OnlyMultiline
+BreakBeforeTernaryOperators: true
+BreakConstructorInitializers: BeforeColon
+BreakInheritanceList: BeforeColon
+BreakStringLiterals: true
+ColumnLimit: 80
+CommentPragmas: '^ IWYU pragma:'
+CompactNamespaces: false
+ConstructorInitializerIndentWidth: 4
+ContinuationIndentWidth: 4
+Cpp11BracedListStyle: false
+DerivePointerAlignment: false
+DisableFormat: false
+EmptyLineAfterAccessModifier: Never
+EmptyLineBeforeAccessModifier: LogicalBlock
+ExperimentalAutoDetectBinPacking: false
+FixNamespaceComments: false
+IfMacros:
+  - KJ_IF_MAYBE
+IncludeBlocks: Preserve
+IncludeCategories:
+  - Regex: '^"(llvm|llvm-c|clang|clang-c)/'
+    Priority: 2
+    SortPriority: 0
+    CaseSensitive: false
+  - Regex: '^(<|"(gtest|gmock|isl|json)/)'
+    Priority: 3
+    SortPriority: 0
+    CaseSensitive: false
+  - Regex: '.*'
+    Priority: 1
+    SortPriority: 0
+    CaseSensitive: false
+IncludeIsMainRegex: '(Test)?$'
+IncludeIsMainSourceRegex: ''
+IndentAccessModifiers: false
+IndentCaseBlocks: false
+IndentCaseLabels: true
+IndentExternBlock: AfterExternBlock
+IndentGotoLabels: true
+IndentPPDirectives: AfterHash
+IndentRequiresClause: true
+IndentWidth: 4
+IndentWrappedFunctionNames: false
+InsertBraces: false
+InsertNewlineAtEOF: false
+InsertTrailingCommas: None
+IntegerLiteralSeparator:
+  Binary: 0
+  BinaryMinDigits: 0
+  Decimal: 0
+  DecimalMinDigits: 0
+  Hex: 0
+  HexMinDigits: 0
+JavaScriptQuotes: Leave
+JavaScriptWrapImports: true
+KeepEmptyLinesAtTheStartOfBlocks: true
+KeepEmptyLinesAtEOF: false
+LambdaBodyIndentation: Signature
+LineEnding: DeriveLF
+MacroBlockBegin: ''
+MacroBlockEnd: ''
+MaxEmptyLinesToKeep: 1
+NamespaceIndentation: None
+ObjCBinPackProtocolList: Auto
+ObjCBlockIndentWidth: 4
+ObjCBreakBeforeNestedBlockParam: true
+ObjCSpaceAfterProperty: false
+ObjCSpaceBeforeProtocolList: true
+PackConstructorInitializers: BinPack
+PenaltyBreakAssignment: 4
+PenaltyBreakBeforeFirstCallParameter: 19
+PenaltyBreakComment: 1000000000
+PenaltyBreakFirstLessLess: 120
+PenaltyBreakOpenParenthesis: 0
+PenaltyBreakScopeResolution: 500
+PenaltyBreakString: 1000
+PenaltyBreakTemplateDeclaration: 10
+PenaltyExcessCharacter: 1000000
+PenaltyIndentedWhitespace: 0
+PenaltyReturnTypeOnItsOwnLine: 60
+PointerAlignment: Right
+PPIndentWidth: 1
+QualifierAlignment: Leave
+ReferenceAlignment: Pointer
+ReflowComments: false
+RemoveBracesLLVM: false
+RemoveParentheses: Leave
+RemoveSemicolon: false
+RequiresClausePosition: OwnLine
+RequiresExpressionIndentation: OuterScope
+SeparateDefinitionBlocks: Leave
+ShortNamespaceLines: 1
+SkipMacroDefinitionBody: false
+SortIncludes: CaseSensitive
+SortJavaStaticImport: Before
+SortUsingDeclarations: LexicographicNumeric
+SpaceAfterCStyleCast: false
+SpaceAfterLogicalNot: false
+SpaceAfterTemplateKeyword: true
+SpaceAroundPointerQualifiers: Default
+SpaceBeforeAssignmentOperators: true
+SpaceBeforeCaseColon: false
+SpaceBeforeCpp11BracedList: false
+SpaceBeforeCtorInitializerColon: true
+SpaceBeforeInheritanceColon: true
+SpaceBeforeJsonColon: false
+SpaceBeforeParens: ControlStatementsExceptControlMacros 
+SpaceBeforeRangeBasedForLoopColon: true
+SpaceBeforeSquareBrackets: false
+SpaceInEmptyBlock: false
+SpacesBeforeTrailingComments: 1
+SpacesInAngles: Never
+SpacesInContainerLiterals: true
+SpacesInLineCommentPrefix:
+  Minimum: 1
+  Maximum: -1
+SpacesInParens: Never
+SpacesInParensOptions:
+  InCStyleCasts: false
+  InConditionalStatements: false
+  InEmptyParentheses: false
+  Other: false
+SpacesInSquareBrackets: false
+Standard: c++03
+TabWidth: 8
+UseTab: Never
+VerilogBreakBetweenInstancePorts: true
+WhitespaceSensitiveMacros:
+  - BOOST_PP_STRINGIZE
+  - CF_SWIFT_NAME
+  - NS_SWIFT_NAME
+  - PP_STRINGIZE
+  - STRINGIZE
+
+# Taken from:
+#   git grep '^#define *FOR_*' src | cut -d':' -f2 | grep -o '[A-Z]*_.*(' \
+#   | tr -d '(' | LC_ALL=C sort -u
+ForEachMacros:
+  - 'FOR_ALL_AUTOCMD_PATTERNS'
+  - 'FOR_ALL_BUFFERS'
+  - 'FOR_ALL_BUFS_FROM_LAST'
+  - 'FOR_ALL_BUF_WININFO'
+  - 'FOR_ALL_CHANNELS'
+  - 'FOR_ALL_CHILD_MENUS'
+  - 'FOR_ALL_DIFFBLOCKS_IN_TAB'
+  - 'FOR_ALL_FRAMES'
+  - 'FOR_ALL_HASHTAB_ITEMS'
+  - 'FOR_ALL_JOBS'
+  - 'FOR_ALL_LIST_ITEMS'
+  - 'FOR_ALL_MENUS'
+  - 'FOR_ALL_NODE_SIBLINGS'
+  - 'FOR_ALL_POPUPWINS'
+  - 'FOR_ALL_POPUPWINS_IN_TAB'
+  - 'FOR_ALL_QFL_ITEMS'
+  - 'FOR_ALL_SIGNS'
+  - 'FOR_ALL_SIGNS_IN_BUF'
+  - 'FOR_ALL_SPELL_LANGS'
+  - 'FOR_ALL_SYNSTATES'
+  - 'FOR_ALL_TABPAGES'
+  - 'FOR_ALL_TAB_WINDOWS'
+  - 'FOR_ALL_TERMS'
+  - 'FOR_ALL_TIMERS'
+  - 'FOR_ALL_WATCHERS'
+  - 'FOR_ALL_WINDOWS'
+  - 'FOR_ALL_WINDOWS_IN_TAB'
+...

.codecov.yml

@@ -0,0 +1,14 @@
+coverage:
+  range: "80...100"
+  status:
+    project:
+      default:
+        threshold: 0.05%
+
+comment: false
+
+# Files not run by tests
+ignore:
+  - "src/dosinst.c"
+  - "src/dosinst.h"
+  - "src/uninstall.c"

.editorconfig

@@ -0,0 +1,37 @@
+# https://spec.editorconfig.org/#supported-pairs
+root = true
+
+[*]
+indent_style = tab
+tab_width = 8
+trim_trailing_whitespace = true
+insert_final_newline = true
+
+[*.{c,h,proto}]
+indent_size = 4
+
+[*.{md,yml,sh,bat}]
+# This will become the default after we migrate the codebase
+indent_style = space
+indent_size = 2
+
+[*.md]
+# Markdown uses trailing whitespaces to do an hard line break
+# https://spec.commonmark.org/0.31.2/#hard-line-breaks
+trim_trailing_whitespace = false
+
+[*.vim]
+indent_style = space
+indent_size = 2
+
+[runtime/pack/dist/opt/{comment,nohlsearch}/**.vim]
+indent_style = space
+indent_size = 4
+
+[runtime/doc/**.txt]
+# It can mess up some documentation by trying to strip trailing whitespaces
+trim_trailing_whitespace = false
+
+[src/testdir/test*.vim]
+# Some tests need trailing whitespaces, for example `set showbreak=>>\ `
+trim_trailing_whitespace = false

.git-blame-ignore-revs

@@ -0,0 +1,15 @@
+# When making commits that are strictly formatting/style changes, add the
+# commit hash here, so git blame can ignore the change. See docs for more details:
+#
+# https://git-scm.com/docs/git-config#Documentation/git-config.txt-blameignoreRevsFile
+#
+# Run this command to always ignore formatting commits in git blame
+# git config blame.ignoreRevsFile .git-blame-ignore-revs
+
+# Patch v9.1.0829 expanded tabs to spaces in sound.c
+8ce738de3fd7192fa6274730594305cde780074c
+# Patch v9.1.0879 reformated sound.c and sign.c
+3cf094edaff815141d9941b8dba52b9e77d8dfc1
+# change indentation style of netrw plugin
+c363ca1ecd1f8db03663ef98dcf41eeacc3c22c7
+c673b805ad80d0aef07e745d412a2bf298ba1c07

.gitattributes

@@ -0,0 +1 @@
+src/testdir/test42.in diff

.github/FUNDING.yml

@@ -0,0 +1 @@
+custom: https://www.vim.org/sponsor/index.php

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -0,0 +1,57 @@
+---
+name: Bug report
+description: Create a report to help us improve Vim.
+labels: [bug]
+
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Thanks for reporting issues of Vim!
+
+        If you want to report a security issue, instead of reporting it here publicly,
+        please disclose it privately via mail to vim-security@googlegroups.com.
+        (It's a private list read only by the maintainers,
+        but anybody can post, after moderation.)
+        
+        To make it easier for us to help you please enter detailed information below.
+  - type: textarea
+    attributes:
+      label: Steps to reproduce
+      placeholder: |
+        1. 
+        2. 
+        3. 
+        4. 
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Expected behaviour
+      placeholder: A clear and concise description of what you expected to happen.
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: Version of Vim
+      description: >
+        Including patch level, use ":version" to see it [e.g. 8.2.1234]
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Environment
+      description: >
+        OS [e.g. Ubuntu 21.10], terminal [e.g. GNOME Terminal 3.38.1], value of $TERM, shell [e.g. bash 5.1.8]; anything that might matter
+      placeholder: |
+        Operating system:
+        Terminal:
+        Value of $TERM:
+        Shell:
+    validations:
+      required: true
+  - type: textarea
+    attributes:
+      label: Logs and stack traces
+      placeholder: Insert log or other text here (if necessary)
+      render: shell

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,22 @@
+---
+name: Feature request
+about: Suggest an enhancement for Vim
+title: ''
+labels: enhancement
+
+---
+
+_Instructions: Replace the template text and remove irrelevant text (including this line)_
+
+**Is your feature request about something that is currently impossible or hard to do? Please describe the problem.**
+A clear and concise description of what is hard to do. Ex. It is difficult to [...] when [...]
+(If it is related to runtime files, please check their header for where to discuss enhancements.)
+
+**Describe the solution you'd like**
+A clear and concise description of what you want to happen.
+
+**Describe alternatives you've considered**
+A clear and concise description of any alternative solutions or features you've considered.
+
+**Additional context**
+Add any other context or screenshots about the feature request here.

.github/MAINTAINERS

@@ -0,0 +1,678 @@
+# Lines starting with '#' are comments.
+# Each line is a file pattern followed by one or more owners.
+# You can use github users with @user or email addresses
+
+# These owners will be the default owners for everything in the repo.
+#*       @brammool
+
+# Order is important. The last matching pattern has the most precedence.
+# So if a pull request only touches javascript files, only these owners
+# will be requested to review.
+
+nsis/lang/russian.nsi			@RestorerZ
+runtime/autoload/freebasic.vim		@dkearns
+runtime/autoload/hare.vim		@selenebun
+runtime/autoload/haskell.vim		@alx741
+runtime/autoload/hcl.vim		@gpanders
+runtime/autoload/javascript.vim		@jsit
+runtime/autoload/modula2.vim		@dkearns
+runtime/autoload/php.vim		@david-szabo97
+runtime/autoload/rubycomplete.vim	@segfault @dkearns
+runtime/autoload/rust.vim		@lilyball
+runtime/autoload/typst.vim		@saccarosium
+runtime/autoload/xmlformat.vim		@chrisbra
+runtime/autoload/dist/json.vim		@habamax
+runtime/colors/blue.vim			@habamax @romainl @neutaaaaan
+runtime/colors/darkblue.vim		@habamax @romainl @neutaaaaan
+runtime/colors/default.vim		@habamax @romainl @neutaaaaan
+runtime/colors/delek.vim		@habamax @romainl @neutaaaaan
+runtime/colors/desert.vim		@habamax @romainl @neutaaaaan
+runtime/colors/elflord.vim		@habamax @romainl @neutaaaaan
+runtime/colors/evening.vim		@habamax @romainl @neutaaaaan
+runtime/colors/habamax.vim		@habamax @romainl @neutaaaaan
+runtime/colors/industry.vim		@habamax @romainl @neutaaaaan
+runtime/colors/koehler.vim		@habamax @romainl @neutaaaaan
+runtime/colors/lunaperche.vim		@habamax @romainl @neutaaaaan
+runtime/colors/morning.vim		@habamax @romainl @neutaaaaan
+runtime/colors/murphy.vim		@habamax @romainl @neutaaaaan
+runtime/colors/pablo.vim		@habamax @romainl @neutaaaaan
+runtime/colors/peachpuff.vim		@habamax @romainl @neutaaaaan
+runtime/colors/quiet.vim		@habamax @romainl @neutaaaaan
+runtime/colors/retrobox.vim		@habamax @romainl @neutaaaaan
+runtime/colors/ron.vim			@habamax @romainl @neutaaaaan
+runtime/colors/shine.vim		@habamax @romainl @neutaaaaan
+runtime/colors/slate.vim		@habamax @romainl @neutaaaaan
+runtime/colors/sorbet.vim		@habamax @romainl @neutaaaaan
+runtime/colors/tools			@habamax @romainl @neutaaaaan
+runtime/colors/torte.vim		@habamax @romainl @neutaaaaan
+runtime/colors/wildcharm.vim		@habamax @romainl @neutaaaaan
+runtime/colors/zaibatsu.vim		@habamax @romainl @neutaaaaan
+runtime/colors/zellner.vim		@habamax @romainl @neutaaaaan
+runtime/compiler/checkstyle.vim		@dkearns
+runtime/compiler/cm3.vim		@dkearns
+runtime/compiler/cucumber.vim		@tpope
+runtime/compiler/dart.vim		@dkearns
+runtime/compiler/dart2js.vim		@dkearns
+runtime/compiler/dart2native.vim	@dkearns
+runtime/compiler/dartanalyser.vim	@dkearns
+runtime/compiler/dartdevc.vim		@dkearns
+runtime/compiler/dartdoc.vim		@dkearns
+runtime/compiler/dartfmt.vim		@dkearns
+runtime/compiler/dotnet.vim		@nickspoons
+runtime/compiler/eruby.vim		@dkearns
+runtime/compiler/fbc.vim		@dkearns
+runtime/compiler/gawk.vim		@dkearns
+runtime/compiler/gjs.vim		@dkearns
+runtime/compiler/gm2.vim		@dkearns
+runtime/compiler/go.vim			@dbarnett
+runtime/compiler/groff.vim		@Konfekt
+runtime/compiler/haml.vim		@tpope
+runtime/compiler/hare.vim		@selenebun
+runtime/compiler/icon.vim		@dkearns
+runtime/compiler/javac.vim		@dkearns
+runtime/compiler/jest.vim		@dkearns
+runtime/compiler/jjs.vim		@dkearns
+runtime/compiler/jshint.vim		@dkearns
+runtime/compiler/jsonlint.vim		@dkearns
+runtime/compiler/jq.vim                 @vito-c
+runtime/compiler/lazbuild.vim		@dkearns
+runtime/compiler/pandoc.vim		@Konfekt
+runtime/compiler/perl.vim		@petdance @heptite
+runtime/compiler/perlcritic.vim		@petdance @dkearns
+runtime/compiler/php.vim		@dkearns
+runtime/compiler/podchecker.vim		@petdance @dkearns
+runtime/compiler/powershell.vim		@heaths
+runtime/compiler/raco.vim		@benknoble
+runtime/compiler/racomake.vim		@benknoble
+runtime/compiler/racosetup.vim		@benknoble
+runtime/compiler/racotest.vim		@benknoble
+runtime/compiler/rake.vim		@tpope @dkearns
+runtime/compiler/rhino.vim		@dkearns
+runtime/compiler/rspec.vim		@tpope @dkearns
+runtime/compiler/rubocop.vim		@dkearns
+runtime/compiler/ruby.vim		@tpope @dkearns
+runtime/compiler/rubyunit.vim		@dkearns
+runtime/compiler/sass.vim		@tpope
+runtime/compiler/sdoc.vim		@gpanders
+runtime/compiler/se.vim			@dkearns
+runtime/compiler/shellcheck.vim		@dkearns
+runtime/compiler/sml.vim		@dkearns
+runtime/compiler/spectral.vim		@romainl
+runtime/compiler/svelte-check.vim		@Konfekt
+runtime/compiler/stylelint.vim		@dkearns
+runtime/compiler/tcl.vim		@dkearns
+runtime/compiler/tidy.vim		@dkearns
+runtime/compiler/ts-node.vim		@dkearns
+runtime/compiler/tsc.vim		@dkearns
+runtime/compiler/typedoc.vim		@dkearns
+runtime/compiler/typst.vim		@saccarosium
+runtime/compiler/xmllint.vim		@dkearns
+runtime/compiler/xo.vim			@dkearns
+runtime/compiler/yamllint.vim		@romainl
+runtime/compiler/zsh.vim		@dkearns
+runtime/doc/ft_hare.txt			@selenebun
+runtime/doc/ps1.txt			@heaths
+runtime/doc/evim-ru.1			@RestorerZ
+runtime/doc/evim-ru.UTF-8.1		@RestorerZ
+runtime/doc/vim-ru.1			@RestorerZ
+runtime/doc/vim-ru.UTF-8.1		@RestorerZ
+runtime/doc/vimdiff-ru.1		@RestorerZ
+runtime/doc/vimdiff-ru.UTF-8.1		@RestorerZ
+runtime/doc/vimtutor-ru.1		@RestorerZ
+runtime/doc/vimtutor-ru.UTF-8.1		@RestorerZ
+runtime/doc/xxd-ru.1			@RestorerZ
+runtime/doc/xxd-ru.UTF-8.1		@RestorerZ
+runtime/ftplugin/abaqus.vim		@costerwi
+runtime/ftplugin/antlr4.vim		@jiangyinzuo
+runtime/ftplugin/apache.vim		@dubgeiser
+runtime/ftplugin/arduino.vim		@k-takata
+runtime/ftplugin/asciidoc.vim		@saccarosium
+runtime/ftplugin/astro.vim		@romainl
+runtime/ftplugin/asy.vim		@avidseeker
+runtime/ftplugin/autohotkey.vim		@telemachus
+runtime/ftplugin/awk.vim		@dkearns
+runtime/ftplugin/basic.vim		@dkearns
+runtime/ftplugin/bst.vim		@tpope
+runtime/ftplugin/c3.vim		@ttytm
+runtime/ftplugin/cabal.vim		@ribru17
+runtime/ftplugin/cedar.vim		@ribru17
+runtime/ftplugin/cfg.vim		@chrisbra
+runtime/ftplugin/chatito.vim		@ObserverOfTime
+runtime/ftplugin/chicken.vim		@evhan
+runtime/ftplugin/clojure.vim		@axvr
+runtime/ftplugin/cmakecache.vim		@ribru17
+runtime/ftplugin/cook.vim		@ribru17
+runtime/ftplugin/cs.vim			@nickspoons
+runtime/ftplugin/csh.vim		@dkearns
+runtime/ftplugin/css.vim		@dkearns
+runtime/ftplugin/csv.vim		@habamax
+runtime/ftplugin/cucumber.vim		@tpope
+runtime/ftplugin/cuda.vim		@ribru17
+runtime/ftplugin/dart.vim	@ribru17
+runtime/ftplugin/deb822sources.vim	@jamessan
+runtime/ftplugin/debchangelog.vim	@jamessan
+runtime/ftplugin/debcontrol.vim		@jamessan
+runtime/ftplugin/debsources.vim		@jamessan
+runtime/ftplugin/desktop.vim		@e-kwsm
+runtime/ftplugin/dnsmasq.vim		@dringsim
+runtime/ftplugin/dosbatch.vim		@mrdubya
+runtime/ftplugin/editorconfig.vim	@ribru17
+runtime/ftplugin/eiffel.vim		@dkearns
+runtime/ftplugin/elixir.vim		@mhanberg
+runtime/ftplugin/erlang.vim		@hcs42
+runtime/ftplugin/eruby.vim		@tpope @dkearns
+runtime/ftplugin/expect.vim		@dkearns
+runtime/ftplugin/exports.vim		@mperry2
+runtime/ftplugin/fennel.vim		@gpanders
+runtime/ftplugin/fetchmail.vim		@dkearns
+runtime/ftplugin/forth.vim		@jkotlinski
+runtime/ftplugin/fpcmake.vim		@dkearns
+runtime/ftplugin/freebasic.vim		@dkearns
+runtime/ftplugin/fstab.vim		@rid9
+runtime/ftplugin/gdb.vim		@xeyownt
+runtime/ftplugin/gdscript.vim		@habamax
+runtime/ftplugin/gdshader.vim		@habamax
+runtime/ftplugin/git.vim		@tpope
+runtime/ftplugin/gitattributes.vim	@ObserverOfTime
+runtime/ftplugin/gitcommit.vim		@tpope
+runtime/ftplugin/gitconfig.vim		@tpope
+runtime/ftplugin/gitignore.vim		@ObserverOfTime
+runtime/ftplugin/gitrebase.vim		@tpope
+runtime/ftplugin/gitsendemail.vim	@tpope
+runtime/ftplugin/gleam.vim		@trilowy
+runtime/ftplugin/go.vim			@dbarnett
+runtime/ftplugin/goaccess.vim		@meonkeys
+runtime/ftplugin/gomod.vim		@yu-yk
+runtime/ftplugin/gprof.vim		@dpelle
+runtime/ftplugin/graphql.vim		@jparise
+runtime/ftplugin/gyp.vim		@ObserverOfTime
+runtime/ftplugin/haml.vim		@tpope
+runtime/ftplugin/hare.vim		@selenebun
+runtime/ftplugin/haredoc.vim		@selenebun
+runtime/ftplugin/heex.vim		@cvincent
+runtime/ftplugin/hcl.vim		@gpanders
+runtime/ftplugin/hgcommit.vim		@k-takata
+runtime/ftplugin/hlsplaylist.vim		@avidseeker
+runtime/ftplugin/hog.vim		@wtfbbqhax
+runtime/ftplugin/html.vim		@dkearns
+runtime/ftplugin/http.vim		@ribru17
+runtime/ftplugin/hyprlang.vim		@ribru17
+runtime/ftplugin/i3config.vim		@hiqua
+runtime/ftplugin/icon.vim		@dkearns
+runtime/ftplugin/indent.vim		@dkearns
+runtime/ftplugin/ishd.vim		@dkearns
+runtime/ftplugin/j.vim			@glts
+runtime/ftplugin/java.vim		@zzzyxwvut
+runtime/ftplugin/javacc.vim		@ribru17
+runtime/ftplugin/javascript.vim		@dkearns
+runtime/ftplugin/javascriptreact.vim	@dkearns
+runtime/ftplugin/jjdescription.vim	@gpanders
+runtime/ftplugin/json.vim		@dbarnett
+runtime/ftplugin/json5.vim		@dkearns
+runtime/ftplugin/jsonc.vim		@izhakjakov
+runtime/ftplugin/julia.vim		@carlobaldassi
+runtime/ftplugin/just.vim		@pbnj
+runtime/ftplugin/jq.vim	    	        @vito-c
+runtime/ftplugin/kconfig.vim		@chrisbra
+runtime/ftplugin/kdl.vim		@imsnif @jiangyinzuo
+runtime/ftplugin/kivy.vim		@ribru17
+runtime/ftplugin/kotlin.vim		@udalov
+runtime/ftplugin/ldapconf.vim		@ribru17
+runtime/ftplugin/leo.vim		@ribru17
+runtime/ftplugin/less.vim		@genoma
+runtime/ftplugin/lex.vim		@ribru17
+runtime/ftplugin/liquid.vim		@tpope
+runtime/ftplugin/lua.vim		@dkearns
+runtime/ftplugin/lc.vim			@ribru17
+runtime/ftplugin/lynx.vim		@dkearns
+runtime/ftplugin/m17ndb.vim		@dseomn
+runtime/ftplugin/m3build.vim		@dkearns
+runtime/ftplugin/m3quake.vim		@dkearns
+runtime/ftplugin/markdown.vim		@tpope
+runtime/ftplugin/mediawiki.vim		@avidseeker
+runtime/ftplugin/meson.vim		@Liambeguin
+runtime/ftplugin/modula2.vim		@dkearns
+runtime/ftplugin/modula3.vim		@dkearns
+runtime/ftplugin/mojo.vim		@ribru17
+runtime/ftplugin/mss.vim		@Freed-Wu
+runtime/ftplugin/nginx.vim		@chr4
+runtime/ftplugin/nim.vim		@ribru17
+runtime/ftplugin/nroff.vim		@a-vrma
+runtime/ftplugin/nsis.vim		@k-takata
+runtime/ftplugin/nu.vim		@mrcjkb
+runtime/ftplugin/octave.vim		@dkearns
+runtime/ftplugin/ondir.vim		@jparise
+runtime/ftplugin/opencl.vim		@Freed-Wu
+runtime/ftplugin/openvpn.vim		@ObserverOfTime
+runtime/ftplugin/org.vim		@saccarosium
+runtime/ftplugin/pascal.vim		@dkearns
+runtime/ftplugin/pbtxt.vim		@lakshayg
+runtime/ftplugin/pdf.vim		@tpope
+runtime/ftplugin/perl.vim		@petdance @dkearns
+runtime/ftplugin/php.vim		@dkearns
+runtime/ftplugin/plsql.vim		@lee-lindley
+runtime/ftplugin/pod.vim		@petdance @dkearns
+runtime/ftplugin/poefilter.vim		@ObserverOfTime
+runtime/ftplugin/postscr.vim		@mrdubya
+runtime/ftplugin/prisma.vim		@ribru17
+runtime/ftplugin/proto.vim		@Limero
+runtime/ftplugin/ps1.vim		@heaths
+runtime/ftplugin/ps1xml.vim		@heaths
+runtime/ftplugin/ptx.vim		@jiangyinzuo
+runtime/ftplugin/purescript.vim		@ribru17
+runtime/ftplugin/pymanifest.vim		@ObserverOfTime
+runtime/ftplugin/python.vim		@tpict
+runtime/ftplugin/qb64.vim		@dkearns
+runtime/ftplugin/qml.vim		@ChaseKnowlden
+runtime/ftplugin/racket.vim		@benknoble
+runtime/ftplugin/rasi.vim		@fymyte
+runtime/ftplugin/readline.vim		@dkearns
+runtime/ftplugin/rescript.vim		@ribru17
+runtime/ftplugin/routeros.vim		@zainin
+runtime/ftplugin/rst.vim		@marshallward
+runtime/ftplugin/ruby.vim		@tpope @dkearns
+runtime/ftplugin/rust.vim		@lilyball
+runtime/ftplugin/samba.vim		@mperry2
+runtime/ftplugin/sass.vim		@tpope
+runtime/ftplugin/scala.vim		@derekwyatt
+runtime/ftplugin/scheme.vim		@evhan
+runtime/ftplugin/scss.vim		@tpope
+runtime/ftplugin/sdoc.vim		@gpanders
+runtime/ftplugin/sed.vim		@dkearns
+runtime/ftplugin/sh.vim			@dkearns
+runtime/ftplugin/shaderslang.vim        @mTvare6
+runtime/ftplugin/slint.vim		@ribru17
+runtime/ftplugin/snakemake.vim		@ribru17
+runtime/ftplugin/solidity.vim		@cothi
+runtime/ftplugin/solution.vim		@dkearns
+runtime/ftplugin/spec.vim		@ignatenkobrain
+runtime/ftplugin/squirrel.vim		@ribru17
+runtime/ftplugin/ssa.vim		@ObserverOfTime
+runtime/ftplugin/sshdconfig.vim		@jiangyinzuo
+runtime/ftplugin/svelte.vim		@igorlfs
+runtime/ftplugin/sway.vim		@ribru17
+runtime/ftplugin/swayconfig.vim		@jamespeapen
+runtime/ftplugin/systemverilog.vim	@Kocha
+runtime/ftplugin/swig.vim		@jmarrec
+runtime/ftplugin/tap.vim		@petdance
+runtime/ftplugin/tcsh.vim		@dkearns
+runtime/ftplugin/tera.vim		@MuntasirSZN
+runtime/ftplugin/terraform.vim		@JannoTjarks
+runtime/ftplugin/tf.vim			@ribru17
+runtime/ftplugin/thrift.vim		@jiangyinzuo
+runtime/ftplugin/tiasm.vim		@Freed-Wu
+runtime/ftplugin/tidy.vim		@dkearns
+runtime/ftplugin/tmux.vim		@ericpruitt
+runtime/ftplugin/toml.vim		@averms
+runtime/ftplugin/tt2html.vim		@petdance
+runtime/ftplugin/typescript.vim		@dkearns
+runtime/ftplugin/typescriptreact.vim	@dkearns
+runtime/ftplugin/typst.vim		@saccarosium
+runtime/ftplugin/unison.vim		@chuwy
+runtime/ftplugin/v.vim			@ribru17
+runtime/ftplugin/vdf.vim		@ObserverOfTime
+runtime/ftplugin/vim.vim		@dkearns
+runtime/ftplugin/wast.vim		@rhysd
+runtime/ftplugin/wget.vim		@dkearns
+runtime/ftplugin/wget2.vim		@dkearns
+runtime/ftplugin/xcompose.vim		@ObserverOfTime
+runtime/ftplugin/xml.vim		@chrisbra
+runtime/ftplugin/xs.vim			@petdance
+runtime/ftplugin/yacc.vim		@ribru17
+runtime/ftplugin/zsh.vim		@chrisbra
+runtime/import/dist/vimhighlight.vim	@lacygoill
+runtime/indent/arduino.vim		@k-takata
+runtime/indent/astro.vim		@wuelnerdotexe
+runtime/indent/basic.vim		@dkearns
+runtime/indent/bst.vim			@tpope
+runtime/indent/cdl.vim			@dkearns
+runtime/indent/chatito.vim		@ObserverOfTime
+runtime/indent/clojure.vim		@axvr
+runtime/indent/config.vim		@dkearns
+runtime/indent/cs.vim			@nickspoons
+runtime/indent/css.vim			@dkearns
+runtime/indent/cucumber.vim		@tpope
+runtime/indent/d.vim			@dkearns
+runtime/indent/dosbatch.vim		@k-takata
+runtime/indent/dtd.vim			@dkearns
+runtime/indent/dylan.vim		@dkearns
+runtime/indent/eiffel.vim		@jocelyn
+runtime/indent/elm.vim			@andys8
+runtime/indent/erlang.vim		@hcs42
+runtime/indent/eruby.vim		@tpope @dkearns
+runtime/indent/eterm.vim		@dkearns
+runtime/indent/falcon.vim		@steveno
+runtime/indent/framescript.vim		@dkearns
+runtime/indent/freebasic.vim		@dkearns
+runtime/indent/gdscript.vim		@habamax
+runtime/indent/gitconfig.vim		@tpope
+runtime/indent/gitolite.vim		@sitaramc
+runtime/indent/glsl.vim		@gpanders
+runtime/indent/go.vim			@dbarnett
+runtime/indent/graphql.vim		@jparise
+runtime/indent/gyp.vim			@ObserverOfTime
+runtime/indent/haml.vim			@tpope
+runtime/indent/hare.vim			@selenebun
+runtime/indent/hcl.vim			@gpanders
+runtime/indent/hog.vim			@wtfbbqhax
+runtime/indent/idlang.vim		@dkearns
+runtime/indent/j.vim			@glts
+runtime/indent/java.vim			@xuhdev
+runtime/indent/javascript.vim		@bounceme
+runtime/indent/json.vim			@elzr
+runtime/indent/jsonc.vim		@izhakjakov
+runtime/indent/julia.vim		@carlobaldassi
+runtime/indent/just.vim			@pbnj
+runtime/indent/kdl.vim			@imsnif @jiangyinzuo
+runtime/indent/kotlin.vim		@udalov
+runtime/indent/krl.vim			@KnoP-01
+runtime/indent/ld.vim			@dkearns
+runtime/indent/less.vim			@genoma
+runtime/indent/liquid.vim		@tpope
+runtime/indent/lua.vim			@marcuscf
+runtime/indent/m17ndb.vim		@dseomn
+runtime/indent/make.vim			@dkearns
+runtime/indent/meson.vim		@Liambeguin
+runtime/indent/mma.vim			@dkearns
+runtime/indent/mojo.vim			@ribru17
+runtime/indent/nginx.vim		@chr4
+runtime/indent/nsis.vim			@k-takata
+runtime/indent/occam.vim		@dkearns
+runtime/indent/perl.vim			@petdance
+runtime/indent/php.vim			@2072
+runtime/indent/postscr.vim		@mrdubya
+runtime/indent/prolog.vim		@dkearns
+runtime/indent/proto.vim		@Limero
+runtime/indent/ps1.vim			@heaths
+runtime/indent/qb64.vim			@dkearns
+runtime/indent/qml.vim			@ChaseKnowlden
+runtime/indent/racket.vim		@benknoble
+runtime/indent/rapid.vim		@KnoP-01
+runtime/indent/readline.vim		@dkearns
+runtime/indent/ruby.vim			@AndrewRadev @dkearns
+runtime/indent/sass.vim			@tpope
+runtime/indent/scala.vim		@derekwyatt
+runtime/indent/scheme.vim		@evhan
+runtime/indent/scss.vim			@tpope
+runtime/indent/sh.vim			@chrisbra
+runtime/indent/solidity.vim		@cothi
+runtime/indent/systemverilog.vim	@Kocha
+runtime/indent/tcl.vim			@dkearns
+runtime/indent/tcsh.vim			@dkearns
+runtime/indent/teraterm.vim		@k-takata
+runtime/indent/terraform.vim		@gpanders
+runtime/indent/thrift.vim		@jiangyinzuo
+runtime/indent/typescript.vim		@HerringtonDarkholme
+runtime/indent/typst.vim		@saccarosium
+runtime/indent/vroom.vim		@dbarnett
+runtime/indent/wast.vim			@rhysd
+runtime/indent/xml.vim			@chrisbra
+runtime/indent/zsh.vim			@chrisbra
+runtime/keymap/armenian-eastern_utf-8.vim	@blinskey
+runtime/keymap/armenian-western_utf-8.vim	@blinskey
+runtime/keymap/russian-typograph.vim	@RestorerZ
+runtime/keymap/tamil_tscii.vim		@yegappan
+runtime/keymap/ukrainian-enhanced.vim 	@Dolfost
+runtime/lang/menu_en_gb.latin1.vim	@mrdubya
+runtime/lang/menu_ru_ru.cp1251.vim	@RestorerZ
+runtime/lang/menu_ru_ru.koi8-r.vim	@RestorerZ
+runtime/lang/menu_ru_ru.utf-8.vim	@RestorerZ
+runtime/pack/dist/opt/cfilter/plugin/cfilter.vim	@yegappan
+runtime/pack/dist/opt/comment/	@habamax
+runtime/pack/dist/opt/matchit/		@chrisbra
+runtime/pack/dist/opt/nohlsearch/		@habamax
+runtime/plugin/manpager.vim		@Konfekt
+runtime/syntax/shared/hgcommitDiff.vim	@vegerot
+runtime/syntax/abaqus.vim		@costerwi
+runtime/syntax/abnf.vim		@A4-Tacks
+runtime/syntax/aidl.vim			@dpelle
+runtime/syntax/ant.vim			@dkearns
+runtime/syntax/antlr4.vim		@jiangyinzuo
+runtime/syntax/arduino.vim		@johshoff
+runtime/syntax/asciidoc.vim		@aerostitch
+runtime/syntax/asm.vim			@dkearns
+runtime/syntax/asmh8300.vim		@dkearns
+runtime/syntax/asterisk.vim		@jaunis
+runtime/syntax/astro.vim		@wuelnerdotexe
+runtime/syntax/asy.vim		@avidseeker
+runtime/syntax/autohotkey.vim		@mmikeww
+runtime/syntax/awk.vim			@dkearns
+runtime/syntax/basic.vim		@dkearns
+runtime/syntax/bst.vim			@tpope
+runtime/syntax/bzl.vim			@dbarnett
+runtime/syntax/bzr.vim			@hdima
+runtime/syntax/cabal.vim		@coot
+runtime/syntax/cabalconfig.vim		@coot
+runtime/syntax/cabalproject.vim		@coot
+runtime/syntax/cf.vim			@ernstvanderlinden
+runtime/syntax/chatito.vim		@ObserverOfTime
+runtime/syntax/chicken.vim		@evhan
+runtime/syntax/chuck.vim		@gacallea
+runtime/syntax/clojure.vim		@axvr
+runtime/syntax/cs.vim			@nickspoons
+runtime/syntax/csv.vim		@habamax
+runtime/syntax/cucumber.vim		@tpope
+runtime/syntax/d.vim			@JesseKPhillips
+runtime/syntax/dart.vim			@pr3d4t0r
+runtime/syntax/datascript.vim		@dpelle
+runtime/syntax/deb822sources.vim	@jamessan
+runtime/syntax/debchangelog.vim		@jamessan
+runtime/syntax/debcontrol.vim		@jamessan
+runtime/syntax/debcopyright.vim		@jamessan
+runtime/syntax/debsources.vim		@jamessan
+runtime/syntax/dep3patch.vim		@jamessan
+runtime/syntax/desktop.vim		@e-kwsm
+runtime/syntax/dosbatch.vim		@mrdubya
+runtime/syntax/dosini.vim		@xuhdev
+runtime/syntax/dot.vim			@mmottl
+runtime/syntax/doxygen.vim		@frogonwheels
+runtime/syntax/dtd.vim			@chrisbra
+runtime/syntax/dts.vim			@zonque
+runtime/syntax/editorconfig.vim		@gpanders
+runtime/syntax/eiffel.vim		@jocelyn
+runtime/syntax/erlang.vim		@hcs42
+runtime/syntax/eruby.vim		@tpope @dkearns
+runtime/syntax/expect.vim		@dkearns
+runtime/syntax/falcon.vim		@steveno
+runtime/syntax/fennel.vim		@gpanders
+runtime/syntax/fetchmail.vim		@dkearns
+runtime/syntax/forth.vim		@jkotlinski
+runtime/syntax/fpcmake.vim		@dkearns
+runtime/syntax/freebasic.vim		@dkearns
+runtime/syntax/fstab.vim		@rid9
+runtime/syntax/gdresource.vim		@habamax
+runtime/syntax/gdscript.vim		@habamax
+runtime/syntax/gdshader.vim		@habamax
+runtime/syntax/git.vim			@tpope
+runtime/syntax/gitattributes.vim	@ObserverOfTime
+runtime/syntax/gitcommit.vim		@tpope
+runtime/syntax/gitconfig.vim		@tpope
+runtime/syntax/gitignore.vim		@ObserverOfTime
+runtime/syntax/gitolite.vim		@sitaramc
+runtime/syntax/gitrebase.vim		@tpope
+runtime/syntax/glsl.vim		@gpanders
+runtime/syntax/go.vim			@bhcleek
+runtime/syntax/goaccess.vim		@meonkeys
+runtime/syntax/godoc.vim		@dbarnett
+runtime/syntax/gp.vim			@KBelabas
+runtime/syntax/gprof.vim		@dpelle
+runtime/syntax/graphql.vim		@jparise
+runtime/syntax/groff.vim		@jmarshall
+runtime/syntax/gyp.vim			@ObserverOfTime
+runtime/syntax/haml.vim			@tpope
+runtime/syntax/hare.vim			@selenebun
+runtime/syntax/haredoc.vim		@selenebun
+runtime/syntax/haskell.vim		@coot
+runtime/syntax/hcl.vim			@gpanders
+runtime/syntax/help_ru.vim		@RestorerZ
+runtime/syntax/hgcommit.vim		@k-takata
+runtime/syntax/hitest.vim		@lacygoill
+runtime/syntax/hog.vim			@wtfbbqhax
+runtime/syntax/hollywood.vim		@sodero
+runtime/syntax/html.vim			@dkearns
+runtime/syntax/htmlangular.vim @dlvandenberg
+runtime/syntax/hyprlang.vim		@saccarosium
+runtime/syntax/i3config.vim		@hiqua
+runtime/syntax/icon.vim			@dkearns
+runtime/syntax/indent.vim		@dkearns
+runtime/syntax/j.vim			@glts
+runtime/syntax/jargon.vim		@h3xx
+runtime/syntax/java.vim			@zzzyxwvut
+runtime/syntax/javascript.vim		@fleiner
+runtime/syntax/jinja.vim		@gpanders
+runtime/syntax/jjdescription.vim	@gpanders
+runtime/syntax/json.vim		        @vito-c
+runtime/syntax/jsonc.vim		@izhakjakov
+runtime/syntax/julia.vim		@carlobaldassi
+runtime/syntax/just.vim			@pbnj
+runtime/syntax/jq.vim		        @vito-c
+runtime/syntax/karel.vim		@kirillmorozov
+runtime/syntax/kconfig.vim		@chrisbra
+runtime/syntax/kivy.vim		@prophittcorey
+runtime/syntax/kotlin.vim		@udalov
+runtime/syntax/kdl.vim			@imsnif @jiangyinzuo
+runtime/syntax/krl.vim			@KnoP-01
+runtime/syntax/less.vim			@genoma
+runtime/syntax/lf.vim			@andis-sprinkis
+runtime/syntax/liquid.vim		@tpope
+runtime/syntax/lua.vim			@marcuscf
+runtime/syntax/lyrics.vim		@ObserverOfTime
+runtime/syntax/lynx.vim			@dkearns
+runtime/syntax/m17ndb.vim		@dseomn
+runtime/syntax/m3build.vim		@dkearns
+runtime/syntax/m3quake.vim		@dkearns
+runtime/syntax/mailcap.vim		@dkearns
+runtime/syntax/make.vim			@rohieb
+runtime/syntax/mallard.vim		@jhradilek
+runtime/syntax/markdown.vim		@tpope
+runtime/syntax/mason.vim		@petdance
+runtime/syntax/mediawiki.vim		@avidseeker
+runtime/syntax/meson.vim		@Liambeguin
+runtime/syntax/modula2.vim		@dkearns
+runtime/syntax/modula2/opt/iso.vim	@trijezdci
+runtime/syntax/modula2/opt/pim.vim	@trijezdci
+runtime/syntax/modula2/opt/r10.vim	@trijezdci
+runtime/syntax/modula3.vim		@dkearns
+runtime/syntax/mss.vim		@Freed-Wu
+runtime/syntax/n1ql.vim			@pr3d4t0r
+runtime/syntax/nginx.vim		@chr4
+runtime/syntax/ninja.vim		@nico
+runtime/syntax/nix.vim			@equill
+runtime/syntax/nroff.vim		@jmarshall
+runtime/syntax/nsis.vim			@k-takata
+runtime/syntax/ondir.vim		@jparise
+runtime/syntax/opencl.vim		@Freed-Wu
+runtime/syntax/openvpn.vim		@ObserverOfTime
+runtime/syntax/org.vim			@saccarosium
+runtime/syntax/pacmanlog.vim		@rpigott
+runtime/syntax/pascal.vim		@dkearns
+runtime/syntax/pbtxt.vim		@lakshayg
+runtime/syntax/pdf.vim			@tpope
+runtime/syntax/perl.vim			@petdance
+runtime/syntax/php.vim			@TysonAndre
+runtime/syntax/plsql.vim		@lee-lindley
+runtime/syntax/pod.vim			@petdance
+runtime/syntax/poefilter.vim		@ObserverOfTime
+runtime/syntax/postscr.vim		@mrdubya
+runtime/syntax/privoxy.vim		@dkearns
+runtime/syntax/progress.vim		@rdnlsmith
+runtime/syntax/prolog.vim		@XVilka
+runtime/syntax/prql.vim			@vanillajonathan
+runtime/syntax/ps1.vim			@heaths
+runtime/syntax/ps1xml.vim		@heaths
+runtime/syntax/psl.vim			@danielkho
+runtime/syntax/ptx.vim			@jiangyinzuo
+runtime/syntax/pymanifest.vim		@ObserverOfTime
+runtime/syntax/qb64.vim			@dkearns
+runtime/syntax/qml.vim			@ChaseKnowlden
+runtime/syntax/racket.vim		@benknoble
+runtime/syntax/raml.vim			@in3d
+runtime/syntax/rapid.vim		@KnoP-01
+runtime/syntax/ratpoison.vim		@trapd00r
+runtime/syntax/rasi.vim			@fymyte
+runtime/syntax/rc.vim			@chrisbra
+runtime/syntax/rcs.vim			@hdima
+runtime/syntax/rebol.vim		@mrdubya
+runtime/syntax/rego.vim			@zenmatic
+runtime/syntax/resolv.vim		@rid9
+runtime/syntax/rng.vim			@jhradilek
+runtime/syntax/routeros.vim		@zainin
+runtime/syntax/rst.vim			@marshallward
+runtime/syntax/ruby.vim			@dkearns
+runtime/syntax/salt.vim			@gpanders
+runtime/syntax/sass.vim			@tpope
+runtime/syntax/scala.vim		@derekwyatt
+runtime/syntax/scheme.vim		@evhan
+runtime/syntax/scss.vim			@tpope
+runtime/syntax/sdoc.vim			@gpanders
+runtime/syntax/sed.vim			@dkearns
+runtime/syntax/shared/debversions.vim	@jamessan
+runtime/syntax/shaderslang.vim          @mTvare6
+runtime/syntax/solidity.vim		@cothi
+runtime/syntax/spec.vim			@ignatenkobrain
+runtime/syntax/sqloracle.vim		@chrisbra
+runtime/syntax/squirrel.vim		@zenmatic
+runtime/syntax/srt.vim			@ObserverOfTime
+runtime/syntax/ssa.vim			@ObserverOfTime
+runtime/syntax/sshconfig.vim		@Jakuje
+runtime/syntax/sshdconfig.vim		@Jakuje
+runtime/syntax/sudoers.vim		@e-kwsm
+runtime/syntax/svn.vim			@hdima
+runtime/syntax/swayconfig.vim		@jamespeapen
+runtime/syntax/swig.vim			@jmarrec
+runtime/syntax/systemverilog.vim	@Kocha
+runtime/syntax/tap.vim			@petdance
+runtime/syntax/tcsh.vim			@dkearns
+runtime/syntax/tera.vim			@MuntasirSZN
+runtime/syntax/teraterm.vim		@k-takata
+runtime/syntax/terraform.vim		@gpanders
+runtime/syntax/thrift.vim		@jiangyinzuo
+runtime/syntax/tiasm.vim		@Freed-Wu
+runtime/syntax/tidy.vim			@dkearns
+runtime/syntax/tmux.vim			@ericpruitt
+runtime/syntax/toml.vim			@averms
+runtime/syntax/tt2.vim			@petdance
+runtime/syntax/tt2html.vim		@petdance
+runtime/syntax/tt2js.vim		@petdance
+runtime/syntax/typescript.vim		@HerringtonDarkholme @rhysd
+runtime/syntax/typescriptreact.vim	@HerringtonDarkholme @rhysd
+runtime/syntax/typst.vim		@gpanders
+runtime/syntax/shared/typescriptcommon.vim	@HerringtonDarkholme @rhysd
+runtime/syntax/unison.vim		@chuwy
+runtime/syntax/vdf.vim			@ObserverOfTime
+runtime/syntax/vroom.vim		@dbarnett
+runtime/syntax/wast.vim			@rhysd
+runtime/syntax/wdl.vim			@zenmatic
+runtime/syntax/wget.vim			@dkearns
+runtime/syntax/wget2.vim		@dkearns
+runtime/syntax/xbl.vim			@dkearns
+runtime/syntax/xcompose.vim		@ObserverOfTime
+runtime/syntax/xml.vim			@chrisbra
+runtime/syntax/xs.vim			@petdance
+runtime/syntax/xslt.vim			@Boobies
+runtime/syntax/zserio.vim		@dpelle
+runtime/syntax/zsh.vim			@chrisbra
+runtime/tutor/tutor.eo			@dpelle
+runtime/tutor/tutor.eo.utf-8		@dpelle
+runtime/tutor/tutor.fr			@dpelle
+runtime/tutor/tutor.fr.utf-8		@dpelle
+runtime/tutor/tutor.ru			@RestorerZ
+runtime/tutor/tutor.ru.cp1251		@RestorerZ
+runtime/tutor/tutor.ru.utf-8		@RestorerZ
+src/iscygpty.*				@k-takata
+src/libvterm/				@leonerd
+src/po/am.po				@gagikh
+src/po/ca.po				@nfdisco
+src/po/de.po				@chrisbra
+src/po/eo.po				@dpelle
+src/po/es.po				@victorhck
+src/po/fi.po				@flammie
+src/po/fr.po				@dpelle
+src/po/ga.po				@kscanne
+src/po/it.po				@azc100
+src/po/ja.po				@k-takata
+src/po/ru.po				@RestorerZ
+src/po/sr.po				@eevan78
+src/po/tr.po				@bitigchi
+src/po/uk.po				@sakhnik
+src/xxd/				@jnweiger

.github/actions/test_artifacts/action.yml

@@ -0,0 +1,27 @@
+name: 'test_artifacts'
+description: "Upload failed test artifacts"
+runs:
+  using: "composite"
+  steps:
+    - name: Upload failed tests
+      uses: actions/upload-artifact@v4
+      with:
+        # Name of the artifact to upload.
+        name: ${{ github.workflow }}-${{ github.job }}-${{ join(matrix.*, '-') }}-failed-tests
+
+        # A file, directory or wildcard pattern that describes what
+        # to upload.
+        path: |
+         ${{ github.workspace }}/runtime/indent/testdir/*.fail
+         ${{ github.workspace }}/runtime/syntax/testdir/failed/*
+         ${{ github.workspace }}/src/testdir/failed/*
+        # The desired behavior if no files are found using the
+        # provided path.
+        if-no-files-found: ignore
+
+        # Duration after which artifact will expire in days. 0 means
+        # using repository settings.
+        retention-days: 0
+
+        # If true, an artifact with a matching name will be deleted
+        overwrite: true

.github/dependabot.yml

@@ -0,0 +1,8 @@
+version: 2
+updates:
+  - package-ecosystem: "github-actions"
+    directory: "/"
+    schedule:
+      interval: "weekly"
+    commit-message:
+      prefix: "CI"

.github/labeler.yml

@@ -0,0 +1,155 @@
+# list of labels and minimatch globs to match to apply the label.
+
+CI:
+  - all:
+    - changed-files:
+      - any-glob-to-any-file:
+        - '.cirrus.yml'
+        - '.github/dependabot.yml'
+        - '.github/labeler.yml'
+        - '.github/workflows/*'
+        - '.appveyor.yml'
+        - '.codecov.yml'
+
+documentation:
+  - all:
+    - changed-files:
+      - any-glob-to-all-files:
+        - '*/doc/*'
+
+translation:
+  - all:
+    - changed-files:
+      - any-glob-to-any-file:
+        - 'src/po/*.po'
+
+if_lua:
+  - all:
+    - changed-files:
+      - any-glob-to-any-file:
+        - 'src/if_lua.c'
+        - 'src/proto/if_lua.pro'
+        - 'runtime/doc/if_lua.txt'
+
+if_mzscheme:
+  - all:
+    - changed-files:
+      - any-glob-to-any-file:
+        - 'src/if_mzsch.c'
+        - 'src/if_mzsch.h'
+        - 'src/proto/if_mzsch.pro'
+        - 'runtime/doc/if_mzsch.txt'
+
+if_perl:
+  - all:
+    - changed-files:
+      - any-glob-to-any-file:
+        - 'src/if_perl.xs'
+        - 'src/if_perlsfio.c'
+        - 'src/proto/if_perl.pro'
+        - 'src/proto/if_perlsfio.pro'
+        - 'runtime/doc/if_perl.txt'
+
+if_python:
+  - all:
+    - changed-files:
+      - any-glob-to-any-file:
+        - 'src/if_py_both.h'
+        - 'runtime/doc/if_pyth.txt'
+        - 'src/if_python.c'
+        - 'src/if_python3.c'
+        - 'src/proto/if_python.pro'
+        - 'src/proto/if_python3.pro'
+
+if_ruby:
+  - all:
+    - changed-files:
+      - any-glob-to-any-file:
+        - 'src/if_ruby.c'
+        - 'src/proto/if_ruby.pro'
+        - 'runtime/doc/if_ruby.txt'
+
+if_tcl:
+  - all:
+    - changed-files:
+      - any-glob-to-any-file:
+        - 'src/if_tcl.c'
+        - 'src/proto/if_tcl.pro'
+        - 'runtime/doc/if_tcl.txt'
+
+installer:
+  - all:
+    - changed-files:
+      - any-glob-to-any-file:
+        - 'nsis/**'
+        - 'src/dosinst.*'
+        - 'src/uninstall.c'
+
+platform-mac:
+  - all:
+    - changed-files:
+      - any-glob-to-any-file:
+        - 'src/INSTALLmac.txt'
+        - 'src/os_mac*'
+        - 'src/proto/os_mac*'
+
+platform-windows:
+  - all:
+    - changed-files:
+      - any-glob-to-any-file:
+        - 'nsis/**'
+        - 'src/*.bat'
+        - 'src/*.bmp'
+        - 'src/*.ico'
+        - 'src/GvimExt/*'
+        - 'src/INSTALLpc.txt'
+        - 'src/Make_cyg*.mak'
+        - 'src/Make_ming.mak'
+        - 'src/Make_mvc.mak'
+        - 'src/dosinst.*'
+        - 'src/gui_dwrite.*'
+        - 'src/gui_w32*'
+        - 'src/if_ole.*'
+        - 'src/iid_ole.c'
+        - 'src/os_mswin*'
+        - 'src/os_w32*'
+        - 'src/os_win32.*'
+        - 'src/proto/gui_w32.pro'
+        - 'src/proto/os_mswin.pro'
+        - 'src/proto/os_win32.pro'
+        - 'src/proto/winclip.pro'
+        - 'src/uninstall.c'
+        - 'src/vim.manifest'
+        - 'src/vim.rc'
+        - 'src/vimrun.c'
+        - 'src/winclip.c'
+        - 'src/xpm/**'
+        - 'src/xpm_w32.*'
+
+runtime:
+  - all:
+    - changed-files:
+      - any-glob-to-any-file:
+        - 'runtime/ftplugin'
+        - 'runtime/syntax'
+        - 'runtime/indent'
+        - 'runtime/pack/dist/opt/termdebug/plugin/termdebug.vim'
+
+termdebug:
+  - all:
+    - changed-files:
+      - any-glob-to-any-file:
+        - 'runtime/pack/dist/opt/termdebug/plugin/termdebug.vim'
+
+plugin-netrw:
+  - all:
+    - changed-files:
+      - any-glob-to-any-file:
+        - 'runtime/plugin/netrwPlugin.vim'
+        - 'runtime/autoload/netrw*'
+
+xxd:
+  - all:
+    - changed-files:
+      - any-glob-to-any-file:
+        - 'src/xxd/*'

.github/workflows/ci.yml

@@ -0,0 +1,744 @@
+name: GitHub CI
+
+on:
+  push:
+    branches: ['**']
+  pull_request:
+
+# Cancels all previous workflow runs for pull requests that have not completed.
+concurrency:
+  # The concurrency group contains the workflow name and the branch name for
+  # pull requests or the commit hash for any other events.
+  group: ${{ github.workflow }}-${{ github.event_name == 'pull_request' && github.head_ref || github.sha }}
+  cancel-in-progress: true
+
+permissions:
+  contents: read # to fetch code (actions/checkout)
+
+jobs:
+  linux:
+    runs-on: ${{ matrix.architecture == 'arm64' && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
+
+    env:
+      CC: ${{ matrix.compiler }}
+      GCC_VER: 13
+      CLANG_VER: 20
+      TEST: test
+      SRCDIR: ./src
+      LEAK_CFLAGS: -DEXITFREE
+      LOG_DIR: ${{ github.workspace }}/logs
+      TERM: xterm
+      DISPLAY: ':99'
+      DEBIAN_FRONTEND: noninteractive
+
+    strategy:
+      fail-fast: false
+      matrix:
+        features: [tiny, normal, huge]
+        compiler: [clang, gcc]
+        extra: [[]]
+        # Only use non-native architecture when features != huge.
+        # features=huge tries to install python3-dev, which fails to install
+        # for the non-native architecture.
+        architecture: [native]
+        include:
+          - features: tiny
+            compiler: clang
+            extra: [nogui]
+          - features: tiny
+            compiler: gcc
+            extra: [nogui]
+          - features: tiny
+            compiler: gcc
+            extra: [nogui]
+            architecture: arm64
+          - features: normal
+            shadow: ./src/shadow
+            compiler: gcc
+            architecture: i386
+          - features: huge
+            coverage: true
+          - features: huge
+            compiler: clang
+            interface: dynamic
+            python3: stable-abi
+          - features: huge
+            compiler: gcc
+            coverage: true
+            interface: dynamic
+            extra: [uchar, testgui]
+          - features: huge
+            compiler: clang
+            # Lua5.1 is the most widely used version (since it's what LuaJIT is
+            # compatible with), so ensure it works
+            lua_ver: '5.1'
+            extra: [asan]
+          - features: huge
+            compiler: gcc
+            coverage: true
+            extra: [unittests]
+          - features: huge
+            compiler: gcc
+            coverage: true
+            extra: [unittests]
+            architecture: arm64
+          - features: normal
+            compiler: gcc
+            extra: [vimtags]
+
+    steps:
+      - name: Checkout repository from github
+        uses: actions/checkout@v4
+
+      - name: Check Filelist (for packaging)
+        run: |
+          # If any files in the repository are not listed in Filelist this will
+          # exit with an error code and list the missing entries.
+          make -f ci/unlisted.make
+
+      - name: Check hlgroups (are any new hlgroups added, but not handled in highlight.c)
+        run: |
+          # If any highlight groups have been documented, but not handled in
+          # highlight.c, nor listed as 'intentionally left out' in hlgroups.ignore,
+          # exit with an error code and list the missing entries.
+          make -C ci -f hlgroups.make
+
+      - run: sudo dpkg --add-architecture i386
+        if: matrix.architecture == 'i386'
+
+      - name: Uninstall snap
+        run: |
+          sudo bash ci/remove_snap.sh
+
+      - name: Install packages
+        run: |
+          # This is added by default, and it is often broken, but we don't need anything from it
+          sudo rm -f /etc/apt/sources.list.d/microsoft-prod.list
+          PKGS=( \
+            gettext \
+            libgtk2.0-dev:${{ matrix.architecture }} \
+            desktop-file-utils \
+            libtool-bin \
+            libncurses-dev:${{ matrix.architecture }} \
+            libxt-dev:${{ matrix.architecture }} \
+            locales-all \
+            software-properties-common \
+          )
+          if ${{ matrix.features == 'huge' }}; then
+            LUA_VER=${{ matrix.lua_ver || '5.4' }}
+            PKGS+=( \
+              autoconf \
+              gdb \
+              lcov \
+              libcanberra-dev \
+              libperl-dev \
+              python3-dev \
+              liblua${LUA_VER}-dev \
+              lua${LUA_VER} \
+              ruby-dev \
+              tcl-dev \
+              cscope \
+              libsodium-dev \
+              attr \
+              libattr1-dev
+            )
+          fi
+          sudo apt-get update && sudo apt-get upgrade -y && sudo apt-get install -y "${PKGS[@]}"
+
+      - name: Install gcc-${{ env.GCC_VER }}
+        if:  matrix.compiler == 'gcc'
+        run: |
+          # ubuntu-toolchain-r/test PPA for gcc-13 compiler
+          sudo add-apt-repository ppa:ubuntu-toolchain-r/test -y
+          sudo apt-get update -y
+          sudo apt-get install -y gcc-${{ env.GCC_VER }}:${{ matrix.architecture }}
+          sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-${{ env.GCC_VER }} 100
+          sudo update-alternatives --set gcc /usr/bin/gcc-${{ env.GCC_VER }}
+
+      - name: Install clang-${{ env.CLANG_VER }}
+        if: matrix.compiler == 'clang'
+        run: |
+          wget -O - https://apt.llvm.org/llvm-snapshot.gpg.key | sudo apt-key add -
+          . /etc/lsb-release
+          sudo add-apt-repository -y "deb http://apt.llvm.org/${DISTRIB_CODENAME}/ llvm-toolchain-${DISTRIB_CODENAME}-${{ env.CLANG_VER }} main"
+          sudo apt-get install -y clang-${{ env.CLANG_VER }} llvm-${{ env.CLANG_VER }}
+          sudo update-alternatives --install /usr/bin/clang clang /usr/bin/clang-${{ env.CLANG_VER }} 100
+          sudo update-alternatives --set clang /usr/bin/clang-${{ env.CLANG_VER }}
+          sudo update-alternatives --install /usr/bin/llvm-cov llvm-cov /usr/bin/llvm-cov-${{ env.CLANG_VER }} 100
+          sudo update-alternatives --install /usr/bin/asan_symbolize asan_symbolize /usr/bin/asan_symbolize-${{ env.CLANG_VER }} 100
+
+      - name: Set up environment
+        run: |
+          mkdir -p "${LOG_DIR}"
+          mkdir -p "${HOME}/bin"
+          echo "${HOME}/bin" >> $GITHUB_PATH
+          (
+          echo "LINUX_VERSION=$(uname -r)"
+          echo "NPROC=$(getconf _NPROCESSORS_ONLN)"
+          echo "TMPDIR=$(mktemp -d -p /tmp)"
+
+          case "${{ matrix.features }}" in
+          tiny)
+            echo "TEST=testtiny"
+            if ${{ contains(matrix.extra, 'nogui') }}; then
+              echo "CONFOPT=--disable-gui"
+            fi
+            ;;
+          normal)
+            ;;
+          huge)
+            echo "TEST=scripttests test_libvterm indenttest syntaxtest"
+            INTERFACE=${{ matrix.interface || 'yes' }}
+            if ${{ matrix.python3 == 'stable-abi' }}; then
+              PYTHON3_CONFOPT="--with-python3-stable-abi=3.8"
+            fi
+            # The ubuntu-24.04 CI runner does not provide a python2 package.
+            echo "CONFOPT=--enable-perlinterp=${INTERFACE} --enable-pythoninterp=no --enable-python3interp=${INTERFACE} --enable-rubyinterp=${INTERFACE} --enable-luainterp=${INTERFACE} --enable-tclinterp=${INTERFACE} ${PYTHON3_CONFOPT}"
+            ;;
+          esac
+
+          if ${{ matrix.coverage == true }}; then
+            CFLAGS="${CFLAGS} --coverage -DUSE_GCOV_FLUSH"
+            echo "LDFLAGS=--coverage"
+          fi
+          if ${{ contains(matrix.extra, 'uchar') }}; then
+            CFLAGS="${CFLAGS} -funsigned-char"
+          fi
+          if ${{ contains(matrix.extra, 'testgui') }}; then
+            echo "TEST=-C src testgui"
+          fi
+          if ${{ contains(matrix.extra, 'unittests') }}; then
+            echo "TEST=unittests"
+          fi
+          if ${{ contains(matrix.extra, 'asan') }}; then
+            echo "SANITIZER_CFLAGS=-g -O0 -DABORT_ON_INTERNAL_ERROR -DEXITFREE -fsanitize-recover=all -fsanitize=address -fsanitize=undefined -fno-omit-frame-pointer"
+            echo "ASAN_OPTIONS=print_stacktrace=1:log_path=${LOG_DIR}/asan"
+            echo "UBSAN_OPTIONS=print_stacktrace=1:log_path=${LOG_DIR}/ubsan"
+            echo "LSAN_OPTIONS=suppressions=${GITHUB_WORKSPACE}/src/testdir/lsan-suppress.txt"
+          fi
+          if ${{ contains(matrix.extra, 'vimtags') }}; then
+            echo "TEST=-C runtime/doc vimtags VIMEXE=../../${SRCDIR}/vim"
+          fi
+          echo "CFLAGS=${CFLAGS}"
+          ) >> $GITHUB_ENV
+
+      - name: Set up system
+        run: |
+          if [[ ${CC} = clang ]]; then
+            # Use llvm-cov instead of gcov when compiler is clang.
+            ln -fs /usr/bin/llvm-cov ${HOME}/bin/gcov
+          fi
+          sudo sysctl -w net.ipv6.conf.lo.disable_ipv6=0
+          sudo usermod -a -G audio "${USER}"
+          sudo bash ci/setup-xvfb.sh
+
+      - name: Check autoconf
+        if: contains(matrix.extra, 'unittests')
+        run: |
+          make -C src autoconf
+
+      - name: Set up shadow dir
+        if: matrix.shadow
+        run: |
+          make -C src shadow
+          echo "SRCDIR=${{ matrix.shadow }}" >> $GITHUB_ENV
+          echo "SHADOWOPT=-C ${{ matrix.shadow }}" >> $GITHUB_ENV
+
+      - name: Configure
+        run: |
+          ./configure --with-features=${{ matrix.features }} ${CONFOPT} --enable-fail-if-missing
+          # Append various warning flags to CFLAGS.
+          sed -i -f ci/config.mk.sed ${SRCDIR}/auto/config.mk
+          sed -i -f ci/config.mk.${CC}.sed ${SRCDIR}/auto/config.mk
+          if [[ ${CC} = clang ]]; then
+            # Suppress some warnings produced by clang 12 and later.
+            sed -i -f ci/config.mk.clang-12.sed ${SRCDIR}/auto/config.mk
+          fi
+
+      - name: Build
+        if: (!contains(matrix.extra, 'unittests'))
+        run: |
+          make ${SHADOWOPT} -j${NPROC}
+
+      - name: Check version
+        if: (!contains(matrix.extra, 'unittests'))
+        run: |
+          "${SRCDIR}"/vim --version
+          "${SRCDIR}"/vim -u NONE -i NONE --not-a-term -esNX -V1 -S ci/if_ver-1.vim -c quit
+          "${SRCDIR}"/vim -u NONE -i NONE --not-a-term -esNX -V1 -S ci/if_ver-2.vim -c quit
+
+      - name: Test
+        if: matrix.architecture != 'arm64'
+        timeout-minutes: 25
+        run: |
+          make ${SHADOWOPT} ${TEST}
+
+
+      # `sg audio` does not work on arm64 runner due to permission ('Incorrect password' error).
+      - name: Test on arm64
+        if: matrix.architecture == 'arm64'
+        timeout-minutes: 25
+        run: |
+          make ${SHADOWOPT} ${TEST}
+
+      - if: ${{ !cancelled() }}
+        uses: ./.github/actions/test_artifacts
+
+      - name: Vim tags
+        if: contains(matrix.extra, 'vimtags')
+        run: |
+          # This will exit with an error code if the generated vim tags differs from source.
+          (
+            cd runtime/doc
+            git diff --exit-code -- tags
+            make html; rm *.html tags.ref;
+            test -f errors.log && exit 3;
+            true
+          )
+
+      - name: Generate gcov files
+        if: matrix.coverage
+        run: |
+          cd "${SRCDIR}"
+          find . -type f -name '*.gcno' -exec gcov -pb {} + || true
+
+      - name: Codecov
+        timeout-minutes: 20
+        if: matrix.coverage
+        uses: codecov/codecov-action@v5
+        with:
+          flags: linux,${{ matrix.features }}-${{ matrix.compiler }}-${{ join(matrix.extra, '-') }}
+          token: ${{ secrets.CODECOV_TOKEN }}
+
+      - name: ASan logs
+        if: contains(matrix.extra, 'asan') && !cancelled()
+        run: |
+          for f in $(grep -lR '#[[:digit:]]* *0x[[:xdigit:]]*' "${LOG_DIR}"); do
+            echo "$f"
+            asan_symbolize -l "$f"
+            false # in order to fail a job
+          done
+
+  macos:
+    runs-on: ${{ matrix.runner }}
+
+    env:
+      CC: clang
+      TEST: test
+      SRCDIR: ./src
+      LEAK_CFLAGS: -DEXITFREE
+      TERM: xterm
+
+    strategy:
+      fail-fast: false
+      matrix:
+        features: [tiny, normal, huge]
+        runner: [macos-13, macos-15]
+
+    steps:
+      - name: Checkout repository from github
+        uses: actions/checkout@v4
+
+      - name: Install packages
+        if: matrix.features == 'huge'
+        run: |
+          brew install lua libtool
+          echo "LUA_PREFIX=$(brew --prefix)" >> $GITHUB_ENV
+
+      - name: Set up Xcode
+        if: matrix.runner == 'macos-15'
+        run: |
+          # Xcode 16 has compiler bugs which are fixed in 16.2+
+          sudo xcode-select -s /Applications/Xcode_16.2.app/Contents/Developer
+
+      - name: Set up environment
+        run: |
+          (
+          echo "NPROC=$(getconf _NPROCESSORS_ONLN)"
+          case "${{ matrix.features }}" in
+          tiny)
+            echo "TEST=testtiny"
+            echo "CONFOPT=--disable-gui"
+            ;;
+          normal)
+            ;;
+          huge)
+            echo "CONFOPT=--enable-perlinterp --enable-python3interp --enable-rubyinterp --enable-luainterp --enable-tclinterp"
+            ;;
+          esac
+          ) >> $GITHUB_ENV
+
+      - name: Configure
+        run: |
+          ./configure --with-features=${{ matrix.features }} ${CONFOPT} --enable-fail-if-missing
+          # Append various warning flags to CFLAGS.
+          # BSD sed needs backup extension specified.
+          sed -i.bak -f ci/config.mk.sed ${SRCDIR}/auto/config.mk
+          # On macOS, the entity of gcc is clang.
+          sed -i.bak -f ci/config.mk.clang.sed ${SRCDIR}/auto/config.mk
+          # Suppress some warnings produced by clang 12 and later.
+          if clang --version | grep -qs 'Apple clang version \(1[3-9]\|[2-9]\)\.'; then
+            sed -i.bak -f ci/config.mk.clang-12.sed ${SRCDIR}/auto/config.mk
+          fi
+
+      - name: Build
+        env:
+          LC_ALL: C
+        run: |
+          make -j${NPROC}
+
+      - name: Check version
+        run: |
+          "${SRCDIR}"/vim --version
+          "${SRCDIR}"/vim -u NONE -i NONE --not-a-term -esNX -V1 -S ci/if_ver-1.vim -c quit
+          "${SRCDIR}"/vim -u NONE -i NONE --not-a-term -esNX -V1 -S ci/if_ver-2.vim -c quit
+
+      - name: Install packages for testing
+        run: |
+          # Apple diff is broken. Use GNU diff instead. See #14032.
+          brew install diffutils
+
+      - name: Test
+        timeout-minutes: 25
+        run: |
+          make ${TEST}
+
+      - if: ${{ !cancelled() }}
+        uses: ./.github/actions/test_artifacts
+
+  windows:
+    runs-on: windows-2022
+
+    env:
+      # Interfaces
+      # Lua
+      LUA_VER: 54
+      LUA_VER_DOT: '5.4'
+      LUA_RELEASE: 5.4.2
+      LUA32_URL: https://downloads.sourceforge.net/luabinaries/lua-%LUA_RELEASE%_Win32_dllw6_lib.zip
+      LUA64_URL: https://downloads.sourceforge.net/luabinaries/lua-%LUA_RELEASE%_Win64_dllw6_lib.zip
+      LUA_DIR: D:\Lua
+      # do not want \L to end up in pathdef.c and compiler complaining about unknown escape sequences \l
+      LUA_DIR_SLASH: D:/Lua
+      # Python 2
+      PYTHON_VER: 27
+      PYTHON_VER_DOT: '2.7'
+      PYTHON_DIR: 'C:\Python27'
+      # Python 3
+      PYTHON3_VER: 313
+      PYTHON3_VER_DOT: '3.13'
+      # Other dependencies
+      # winpty
+      WINPTY_URL: https://github.com/rprichard/winpty/releases/download/0.4.3/winpty-0.4.3-msvc2015.zip
+      # libsodium
+      SODIUM_VER: '1.0.20'
+      # SODIUM_MSVC_URL: https://download.libsodium.org/libsodium/releases/libsodium-%SODIUM_VER%-stable-msvc.zip
+      SODIUM_MSVC_URL: https://github.com/jedisct1/libsodium/releases/download/%SODIUM_VER%-RELEASE/libsodium-%SODIUM_VER%-msvc.zip
+      SODIUM_MSVC_VER: v143
+      # SODIUM_MINGW_URL: https://download.libsodium.org/libsodium/releases/libsodium-%SODIUM_VER%-stable-mingw.tar.gz
+      SODIUM_MINGW_URL: https://github.com/jedisct1/libsodium/releases/download/%SODIUM_VER%-RELEASE/libsodium-%SODIUM_VER%-mingw.tar.gz
+      SODIUM_MINGW_VER: 26
+      # Gettext-tools, iconv and libraries
+      GETTEXT32_URL: https://github.com/mlocati/gettext-iconv-windows/releases/download/v0.21-v1.16/gettext0.21-iconv1.16-shared-32.zip
+      GETTEXT64_URL: https://github.com/mlocati/gettext-iconv-windows/releases/download/v0.21-v1.16/gettext0.21-iconv1.16-shared-64.zip
+      # Escape sequences
+      COL_RED: "\x1b[31m"
+      COL_GREEN: "\x1b[32m"
+      COL_YELLOW: "\x1b[33m"
+      COL_RESET: "\x1b[m"
+
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - { features: HUGE,   toolchain: msvc,  VIMDLL: no,  GUI: no,  arch: x64, python3: stable }
+          - { features: HUGE,   toolchain: mingw, VIMDLL: yes, GUI: yes, arch: x86, python3: stable, coverage: yes }
+          - { features: HUGE,   toolchain: msvc,  VIMDLL: no,  GUI: yes, arch: x86 }
+          - { features: HUGE,   toolchain: mingw, VIMDLL: yes, GUI: no,  arch: x64, coverage: yes }
+          - { features: NORMAL, toolchain: msvc,  VIMDLL: yes, GUI: no,  arch: x86 }
+          - { features: NORMAL, toolchain: mingw, VIMDLL: no,  GUI: yes, arch: x64 }
+          - { features: TINY,   toolchain: msvc,  VIMDLL: yes, GUI: yes, arch: x64 }
+          - { features: TINY,   toolchain: mingw, VIMDLL: no,  GUI: no,  arch: x86 }
+
+    steps:
+      - name: Initialize
+        id: init
+        shell: bash
+        run: |
+          # Show Windows version
+          cmd /c ver
+
+          git config --global core.autocrlf input
+
+          if ${{ matrix.arch == 'x64' }}; then
+            cygreg=registry
+            pyreg=
+            echo "VCARCH=amd64" >> $GITHUB_ENV
+            echo "WARCH=x64" >> $GITHUB_ENV
+            echo "BITS=64" >> $GITHUB_ENV
+            echo "MSYSTEM=MINGW64" >> $GITHUB_ENV
+          else
+            cygreg=registry32
+            pyreg=-32
+            echo "VCARCH=x86" >> $GITHUB_ENV
+            echo "WARCH=ia32" >> $GITHUB_ENV
+            echo "BITS=32" >> $GITHUB_ENV
+            echo "MSYSTEM=MINGW32" >> $GITHUB_ENV
+          fi
+
+          echo "VCVARSALL=$(vswhere -products \* -latest -property installationPath)\\VC\\Auxiliary\\Build\\vcvarsall.bat" >> $GITHUB_ENV
+          if ${{ matrix.features != 'TINY' }}; then
+            if ${{ matrix.arch == 'x86' }}; then
+              choco install python2 --no-progress --forcex86
+            else
+              choco install python2 --no-progress
+            fi
+          fi
+          python3_dir=$(cat "/proc/$cygreg/HKEY_LOCAL_MACHINE/SOFTWARE/Python/PythonCore/${PYTHON3_VER_DOT}$pyreg/InstallPath/@")
+          echo "PYTHON3_DIR=$python3_dir" >> $GITHUB_ENV
+
+          if ${{ matrix.toolchain == 'msvc' }}; then
+            SODIUM_DIR=D:\\libsodium
+            echo "SODIUM_LIB=${SODIUM_DIR}\\${{ matrix.arch == 'x64' && 'x64' || 'Win32' }}\\Release\\${SODIUM_MSVC_VER}\\dynamic" >> $GITHUB_ENV
+          else
+            SODIUM_DIR=D:\\libsodium-win${{ matrix.arch == 'x64' && '64' || '32' }}
+            # do not want \L to end up in pathdef.c and compiler complaining about unknown escape sequences \l
+            SODIUM_DIR_SLASH=D:/libsodium-win${{ matrix.arch == 'x64' && '64' || '32' }}
+            echo "SODIUM_LIB=${SODIUM_DIR}\\bin" >> $GITHUB_ENV
+            echo "SODIUM_DIR_SLASH=${SODIUM_DIR_SLASH}" >> $GITHUB_ENV
+          fi
+          echo "SODIUM_DIR=${SODIUM_DIR}" >> $GITHUB_ENV
+          echo "GETTEXT_PATH=D:\gettext${{ matrix.arch == 'x64' && '64' || '32' }}" >> $GITHUB_ENV
+
+      - uses: msys2/setup-msys2@v2
+        if: matrix.toolchain == 'mingw'
+        with:
+          update: true
+          install: tar
+          pacboy: >-
+            make:p gcc:p
+          msystem: ${{ env.MSYSTEM }}
+          release: false
+
+      - name: Checkout repository from github
+        uses: actions/checkout@v4
+
+      - name: Create a list of download URLs
+        shell: cmd
+        run: |
+          type NUL > urls.txt
+          echo %LUA_RELEASE%>> urls.txt
+          echo %WINPTY_URL%>> urls.txt
+          echo %SODIUM_VER%>> urls.txt
+          echo %GETTEXT32_URL%>> urls.txt
+          echo %GETTEXT64_URL%>> urls.txt
+
+      - name: Cache downloaded files
+        uses: actions/cache@v4
+        with:
+          path: downloads
+          key: ${{ runner.os }}-${{ matrix.arch }}-${{ hashFiles('urls.txt') }}
+
+      - name: Download dependencies
+        shell: cmd
+        run: |
+          path C:\Program Files\7-Zip;%path%
+          if not exist downloads mkdir downloads
+
+          echo %COL_GREEN%Download Lua%COL_RESET%
+          call :downloadfile %LUA${{ env.BITS }}_URL% downloads\lua.zip
+          7z x downloads\lua.zip -o%LUA_DIR% > nul || exit 1
+
+          echo %COL_GREEN%Download winpty%COL_RESET%
+          call :downloadfile %WINPTY_URL% downloads\winpty.zip
+          7z x -y downloads\winpty.zip -oD:\winpty > nul || exit 1
+          copy /Y D:\winpty\%WARCH%\bin\winpty.dll        src\winpty%BITS%.dll
+          copy /Y D:\winpty\%WARCH%\bin\winpty-agent.exe  src\
+
+          echo %COL_GREEN%Download libsodium%COL_RESET%
+          if "${{ matrix.toolchain }}"=="msvc" (
+            call :downloadfile %SODIUM_MSVC_URL% downloads\libsodium.zip
+            7z x -y downloads\libsodium.zip -oD:\ > nul || exit 1
+          ) else (
+            call :downloadfile %SODIUM_MINGW_URL% downloads\libsodium.tar.gz
+            7z x -y downloads\libsodium.tar.gz -so | 7z x -si -ttar -oD:\ > nul || exit 1
+            mklink %SODIUM_LIB%\libsodium.dll %SODIUM_LIB%\libsodium-%SODIUM_MINGW_VER%.dll
+          )
+
+          echo %COL_GREEN%Download Gettext%COL_RESET%
+          call :downloadfile %GETTEXT${{ env.BITS }}_URL% downloads\gettext${{ env.BITS }}.zip
+          7z e -y downloads\gettext${{ env.BITS }}.zip -oD:\gettext${{ env.BITS }} > nul || exit 1
+          copy /y D:\gettext${{ env.BITS }}\libintl-8.dll src\ || exit 1
+          copy /y D:\gettext${{ env.BITS }}\libiconv-2.dll src\ || exit 1
+
+          goto :eof
+
+          :downloadfile
+          :: call :downloadfile <URL> <localfile>
+          if not exist %2 (
+            curl -f -L %1 -o %2
+          )
+          if ERRORLEVEL 1 (
+            rem Retry once.
+            curl -f -L %1 -o %2 || exit 1
+          )
+          goto :eof
+
+      - name: Build (MSVC)
+        if: matrix.toolchain == 'msvc'
+        shell: cmd
+        run: |
+          call "%VCVARSALL%" %VCARCH%
+          cd src
+          if "${{ matrix.VIMDLL }}"=="yes" (
+            set GUI=yes
+          ) else (
+            set GUI=${{ matrix.GUI }}
+          )
+          if "${{ matrix.python3 }}"=="stable" (
+            set PYTHON3_STABLE=yes
+          ) else (
+            set PYTHON3_STABLE=no
+          )
+          if "${{ matrix.features }}"=="HUGE" (
+            nmake -nologo -f Make_mvc.mak ^
+              FEATURES=${{ matrix.features }} ^
+              GUI=%GUI% IME=yes ICONV=yes VIMDLL=${{ matrix.VIMDLL }} ^
+              DYNAMIC_LUA=yes LUA=%LUA_DIR% ^
+              DYNAMIC_PYTHON=yes PYTHON=%PYTHON_DIR% ^
+              DYNAMIC_PYTHON3=yes PYTHON3=%PYTHON3_DIR% ^
+              DYNAMIC_PYTHON3_STABLE_ABI=%PYTHON3_STABLE% ^
+              DYNAMIC_SODIUM=yes SODIUM=%SODIUM_DIR%
+          ) else (
+            nmake -nologo -f Make_mvc.mak ^
+              FEATURES=${{ matrix.features }} ^
+              GUI=%GUI% IME=yes ICONV=yes VIMDLL=${{ matrix.VIMDLL }}
+          )
+
+      - name: Build (MinGW)
+        if: matrix.toolchain == 'mingw'
+        shell: msys2 {0}
+        run: |
+          cd src
+          if [ "${{ matrix.VIMDLL }}" = "yes" ]; then
+            GUI=yes
+          else
+            GUI=${{ matrix.GUI }}
+          fi
+          if [ "${{ matrix.python3 }}" = "stable" ]; then
+            PYTHON3_STABLE=yes
+          else
+            PYTHON3_STABLE=no
+          fi
+          if [ "${{ matrix.features }}" = "HUGE" ]; then
+            mingw32-make -f Make_ming.mak -j2 \
+              FEATURES=${{ matrix.features }} \
+              GUI=$GUI IME=yes ICONV=yes VIMDLL=${{ matrix.VIMDLL }} \
+              DYNAMIC_LUA=yes LUA=${LUA_DIR_SLASH} \
+              DYNAMIC_PYTHON=yes PYTHON=${PYTHON_DIR} \
+              DYNAMIC_PYTHON3=yes PYTHON3=${PYTHON3_DIR} \
+              DYNAMIC_PYTHON3_STABLE_ABI=${PYTHON3_STABLE} \
+              DYNAMIC_SODIUM=yes SODIUM=${SODIUM_DIR_SLASH} \
+              STATIC_STDCPLUS=yes COVERAGE=${{ matrix.coverage }}
+          else
+            mingw32-make -f Make_ming.mak -j2 \
+              FEATURES=${{ matrix.features }} \
+              GUI=$GUI IME=yes ICONV=yes VIMDLL=${{ matrix.VIMDLL }} \
+              STATIC_STDCPLUS=yes
+          fi
+
+      - name: Check version
+        shell: cmd
+        run: |
+          PATH %LUA_DIR%;C:\msys64\%MSYSTEM%\bin;%PATH%;%PYTHON3_DIR%
+          if "${{ matrix.GUI }}"=="yes" (
+            start /wait src\gvim -u NONE -i NONE -c "redir > version.txt | ver | q" || exit 1
+            type version.txt
+            echo.
+            start /wait src\gvim -u NONE -i NONE -c "redir! > version.txt | so ci\if_ver-1.vim | q"
+            start /wait src\gvim -u NONE -i NONE -c "redir >> version.txt | so ci\if_ver-2.vim | q"
+            type version.txt
+            del version.txt
+          ) else (
+            src\vim --version || exit 1
+            src\vim -u NONE -i NONE --not-a-term -esNX -V1 -S ci/if_ver-1.vim -c quit
+            src\vim -u NONE -i NONE --not-a-term -esNX -V1 -S ci/if_ver-2.vim -c quit
+          )
+
+      #- name: Prepare Artifact
+      #  shell: cmd
+      #  run: |
+      #    mkdir artifacts
+      #    copy src\*vim.exe artifacts
+      #    copy src\vim*.dll artifacts
+      #
+      #- name: Upload Artifact
+      #  uses: actions/upload-artifact@v1
+      #  with:
+      #    name: vim${{ matrix.bits }}-${{ matrix.toolchain }}
+      #    path: ./artifacts
+
+      - name: Install packages for testing
+        shell: bash
+        run: |
+          if ${{ matrix.features != 'TINY' }}; then
+            if ${{ matrix.arch == 'x64' }}; then
+              choco install netbeans --no-progress
+            else
+              exit 0
+            fi
+          fi
+
+      - name: Test and show the result of testing gVim
+        if: matrix.GUI == 'yes' || matrix.VIMDLL == 'yes'
+        shell: cmd
+        timeout-minutes: 15
+        run: |
+          PATH %LUA_DIR%;C:\msys64\%MSYSTEM%\bin;%PATH%;%PYTHON3_DIR%;%SODIUM_LIB%
+          call "%VCVARSALL%" %VCARCH%
+
+          echo %COL_GREEN%Test gVim:%COL_RESET%
+          cd src\testdir
+          if "${{ matrix.GUI }}"=="yes" (
+            nmake -nologo -f Make_mvc.mak VIMPROG=..\gvim || exit 1
+          ) else (
+            @rem Run only tiny tests.
+            nmake -nologo -f Make_mvc.mak tiny VIMPROG=..\gvim  || exit 1
+          )
+
+      - name: Test and show the result of testing Vim
+        if: matrix.GUI == 'no' || matrix.VIMDLL == 'yes'
+        shell: cmd
+        timeout-minutes: 15
+        run: |
+          PATH %LUA_DIR%;C:\msys64\%MSYSTEM%\bin;%PATH%;%PYTHON3_DIR%;%SODIUM_LIB%
+          call "%VCVARSALL%" %VCARCH%
+
+          echo %COL_GREEN%Test Vim:%COL_RESET%
+          cd src\testdir
+          nmake -nologo -f Make_mvc.mak clean
+          if "${{ matrix.GUI }}"=="no" (
+            nmake -nologo -f Make_mvc.mak VIMPROG=..\vim || exit 1
+          ) else (
+            @rem Run only tiny tests.
+            nmake -nologo -f Make_mvc.mak tiny VIMPROG=..\vim  || exit 1
+          )
+
+      - if: ${{ !cancelled() }}
+        uses: ./.github/actions/test_artifacts
+
+      - name: Generate gcov files
+        if: matrix.coverage
+        shell: msys2 {0}
+        run: |
+          cd src
+          find . -type f -name '*.gcno' -exec gcov -pb {} + || true
+
+      - name: Codecov
+        timeout-minutes: 20
+        if: matrix.coverage
+        uses: codecov/codecov-action@v5
+        with:
+          directory: src
+          flags: windows,${{ matrix.toolchain }}-${{ matrix.arch }}-${{ matrix.features }}
+          token: ${{ secrets.CODECOV_TOKEN }}

.github/workflows/codeql-analysis.yml

@@ -0,0 +1,76 @@
+# For most projects, this workflow file will not need changing; you simply need
+# to commit it to your repository.
+#
+# You may wish to alter this file to override the set of languages analyzed,
+# or to provide custom queries or build logic.
+name: "CodeQL"
+
+on:
+  push:
+    branches: [master]
+  pull_request:
+    # The branches below must be a subset of the branches above
+    branches: [master]
+  schedule:
+    - cron: '0 18 * * 1'
+
+# Cancels all previous workflow runs for pull requests that have not completed.
+concurrency:
+  # The concurrency group contains the workflow name and the branch name for
+  # pull requests or the commit hash for any other events.
+  group: ${{ github.workflow }}-${{ github.event_name == 'pull_request' && github.head_ref || github.sha }}
+  cancel-in-progress: true
+
+permissions:
+  contents: read # to fetch code (actions/checkout)
+
+jobs:
+  analyze:
+    permissions:
+      contents: read # to fetch code (actions/checkout)
+      security-events: write #  (github/codeql-action/autobuild)
+
+    name: Analyze
+    runs-on: ubuntu-latest
+
+    strategy:
+      fail-fast: false
+      matrix:
+        # Override automatic language detection by changing the below list
+        # Supported options are ['csharp', 'cpp', 'go', 'java', 'javascript', 'python']
+        language: ['cpp', 'python']
+        # Learn more...
+        # https://docs.github.com/en/github/finding-security-vulnerabilities-and-errors-in-your-code/configuring-code-scanning#overriding-automatic-language-detection
+
+    steps:
+    - name: Checkout repository from github
+      uses: actions/checkout@v4
+
+    # Initializes the CodeQL tools for scanning.
+    - name: Initialize CodeQL
+      uses: github/codeql-action/init@v3
+      with:
+        languages: ${{ matrix.language }}
+        # If you wish to specify custom queries, you can do so here or in a config file.
+        # By default, queries listed here will override any specified in a config file.
+        # Prefix the list here with "+" to use these queries and those in the config file.
+        # queries: ./path/to/local/query, your-org/your-repo/queries@main
+
+    # Autobuild attempts to build any compiled languages  (C/C++, C#, or Java).
+    # If this step fails, then you should remove it and run the build manually (see below)
+    - name: Autobuild
+      uses: github/codeql-action/autobuild@v3
+
+    # ℹ️ Command-line programs to run using the OS shell.
+    # 📚 https://git.io/JvXDl
+
+    # ✏️ If the Autobuild fails above, remove it and uncomment the following three lines
+    #    and modify them (or add more) to build your code if your project
+    #    uses a compiled language
+
+    #- run: |
+    #   make bootstrap
+    #   make release
+
+    - name: Perform CodeQL Analysis
+      uses: github/codeql-action/analyze@v3

.github/workflows/coverity.yml

@@ -0,0 +1,86 @@
+name: Coverity
+on:
+  schedule:
+    - cron: '42 0 * * *'  # Run once per day, to avoid Coverity's submission limits
+  workflow_dispatch:
+
+permissions:
+  contents: read # to fetch code (actions/checkout)
+
+jobs:
+  scan:
+    runs-on: ubuntu-22.04
+
+    env:
+      CC: gcc
+      DEBIAN_FRONTEND: noninteractive
+      TOKEN: ${{ secrets.COVERITY_SCAN_TOKEN }}
+
+    steps:
+      - name: Checkout repository from github
+        if: env.TOKEN
+        uses: actions/checkout@v4
+
+      - name: Download Coverity
+        if: env.TOKEN
+        run: |
+          wget -q https://scan.coverity.com/download/cxx/linux64 --post-data "token=$TOKEN&project=vim" -O coverity_tool.tgz
+          mkdir cov-scan
+          tar ax -f coverity_tool.tgz --strip-components=1 -C cov-scan
+
+      - name: Install packages
+        if: env.TOKEN
+        run: |
+          sudo apt-get update && sudo apt-get install -y \
+            autoconf \
+            gettext \
+            libcanberra-dev \
+            libperl-dev \
+            python2-dev \
+            python3-dev \
+            liblua5.4-dev \
+            lua5.4 \
+            ruby-dev \
+            tcl-dev \
+            libgtk2.0-dev \
+            desktop-file-utils \
+            libtool-bin \
+            libsodium-dev
+
+      - name: Set up environment
+        if: env.TOKEN
+        run: |
+          echo "$(pwd)/cov-scan/bin" >> $GITHUB_PATH
+          (
+          echo "NPROC=$(getconf _NPROCESSORS_ONLN)"
+          echo "CONFOPT=--enable-perlinterp --enable-pythoninterp --enable-python3interp --enable-rubyinterp --enable-luainterp --enable-tclinterp"
+          ) >> $GITHUB_ENV
+
+      - name: Configure
+        if: env.TOKEN
+        run: |
+          ./configure --with-features=huge ${CONFOPT} --enable-fail-if-missing
+          # Append various warning flags to CFLAGS.
+          sed -i -f ci/config.mk.sed src/auto/config.mk
+          sed -i -f ci/config.mk.${CC}.sed src/auto/config.mk
+          # -O2 gives false warning and turns it into an error:
+          # warning: function may return address of local variable [-Wreturn-local-addr]
+          sed -i 's/-O2 \?//' src/auto/config.mk
+
+      - name: Build/scan vim
+        if: env.TOKEN
+        run: |
+          cov-build --dir cov-int make -j${NPROC}
+
+      - name: Submit results
+        if: env.TOKEN
+        run: |
+          tar zcf cov-scan.tgz cov-int
+          curl --form token=$TOKEN \
+            --form email=$EMAIL \
+            --form file=@cov-scan.tgz \
+            --form version="$(git rev-parse HEAD)" \
+            --form description="Automatic GHA scan" \
+            'https://scan.coverity.com/builds?project=vim'
+        env:
+          EMAIL: ${{ secrets.COVERITY_SCAN_EMAIL }}

.github/workflows/label.yml

@@ -0,0 +1,22 @@
+# This workflow will triage pull requests and apply a label based on the
+# paths that are modified in the pull request.
+#
+# To use this workflow, you will need to set up a .github/labeler.yml
+# file with configuration.  For more information, see:
+# https://github.com/actions/labeler
+
+name: Labeler
+on: [pull_request_target]
+
+jobs:
+  label:
+
+    runs-on: ubuntu-latest
+    permissions:
+      contents: read
+      pull-requests: write
+
+    steps:
+    - uses: actions/labeler@v5
+      with:
+        repo-token: "${{ secrets.GITHUB_TOKEN }}"

.gitignore

@@ -0,0 +1,130 @@
+# Unixen: object and executable files.
+*.o
+src/vim
+src/xxd/xxd
+src/auto/if_perl.c
+src/auto/gui_gtk_gresources.c
+src/auto/gui_gtk_gresources.h
+src/auto/os_haiku.rdef
+src/objects/.dirstamp
+src/objects
+src/po/big5corr
+src/po/sjiscorr
+src/types.vim
+
+# We do need src/auto/configure.
+src/auto/config.cache
+src/auto/config.h
+src/auto/config.log
+src/auto/config.mk
+src/auto/config.status
+src/auto/osdef.h
+src/auto/link.log
+src/auto/link.sed
+src/auto/pathdef.c
+
+# Windows
+*.exe
+*.idb
+*.exp
+*.map
+*.obj
+*.pdb
+*.ilk
+*.sln
+*.suo
+*.res
+*.RES
+vim*.dll
+vim*.lib
+src/dobj*/pathdef.c
+src/gobj*/pathdef.c
+src/obj*/pathdef.c
+src/Obj*/pathdef.c
+gvimext.dll
+gvimext.lib
+gvim.lib
+runtime/doc/uganda.nsis.txt
+nsis/icons/*
+/vim90/
+.vscode/
+
+# NetBeans
+nbproject/*
+
+# Mac OSX
+src/xxd/xxd.dSYM
+.DS_Store
+
+# All platforms
+*.rej
+*.orig
+*.mo
+*.swp
+*~
+*.pyc
+*.log
+src/po/vim.pot
+src/tags
+/tags
+/GPATH
+/GTAGS
+/GRTAGS
+nsis/tags
+
+# Generated by "make test"
+src/po/*.ck
+src/po/*.desktop
+src/testdir/mbyte.vim
+src/testdir/mzscheme.vim
+src/testdir/lua.vim
+src/testdir/small.vim
+src/testdir/tiny.vim
+src/testdir/test*.out
+src/testdir/test*.failed
+src/testdir/test.log
+src/testdir/dostmp/*
+src/testdir/messages
+src/testdir/viminfo
+src/testdir/opt_test.vim
+src/testdir/failed
+src/testdir/starttime
+runtime/indent/testdir/*.out
+runtime/indent/testdir/*.fail
+src/memfile_test
+src/json_test
+src/message_test
+src/kword_test
+
+runtime/syntax/testdir/Xfilter
+runtime/syntax/testdir/done/
+runtime/syntax/testdir/failed/
+runtime/syntax/testdir/messages
+runtime/syntax/testdir/testdeps.mk
+runtime/syntax/testdir/vimcmd
+
+# Generated by "make install"
+runtime/doc/doctags
+runtime/doc/tags-*
+
+# Temporarily generated by "runtime/syntax/generator/make"
+runtime/syntax/generator/generator.err
+runtime/syntax/generator/sanity_check.err
+runtime/syntax/generator/vim.vim.rc
+
+# Generated by "make shadow".  The directory names could be anything but we
+# restrict them to shadow (the default) or shadow-*
+src/shadow
+src/shadow-*
+src/runtime
+src/pixmaps
+src/LICENSE
+src/README.txt
+
+# other files possibly created by tools
+src/cscope.out
+
+# Linter/language server files
+/.cache/clangd/
+/.ccls-cache/
+/compile_commands.json

.hgignore

@@ -0,0 +1,132 @@
+syntax: glob
+
+# Unixen: object and executable files.
+*.o
+src/vim
+src/xxd/xxd
+src/auto/if_perl.c
+src/auto/gui_gtk_gresources.c
+src/auto/gui_gtk_gresources.h
+src/auto/os_haiku.rdef
+src/objects/.dirstamp
+src/objects
+src/po/big5corr
+src/po/sjiscorr
+src/types.vim
+
+# We do need src/auto/configure.
+src/auto/config.cache
+src/auto/config.h
+src/auto/config.log
+src/auto/config.mk
+src/auto/config.status
+src/auto/osdef.h
+src/auto/link.log
+src/auto/link.sed
+src/auto/pathdef.c
+
+# Windows
+*.exe
+*.idb
+*.exp
+*.map
+*.obj
+*.pdb
+*.ilk
+*.sln
+*.suo
+*.res
+*.RES
+vim*.dll
+vim*.lib
+src/dobj*/pathdef.c
+src/gobj*/pathdef.c
+src/obj*/pathdef.c
+src/Obj*/pathdef.c
+gvimext.dll
+gvimext.lib
+gvim.lib
+runtime/doc/uganda.nsis.txt
+nsis/icons/*
+/vim90/
+.vscode/
+
+# NetBeans
+nbproject/*
+
+# Mac OSX
+src/xxd/xxd.dSYM
+.DS_Store
+
+# All platforms
+*.rej
+*.orig
+*.mo
+*.swp
+*~
+*.pyc
+*.log
+src/po/vim.pot
+src/tags
+/tags
+/GPATH
+/GTAGS
+/GRTAGS
+nsis/tags
+
+# Generated by "make test"
+src/po/*.ck
+src/po/*.desktop
+src/testdir/mbyte.vim
+src/testdir/mzscheme.vim
+src/testdir/lua.vim
+src/testdir/small.vim
+src/testdir/tiny.vim
+src/testdir/test*.out
+src/testdir/test*.failed
+src/testdir/test.log
+src/testdir/dostmp/*
+src/testdir/messages
+src/testdir/viminfo
+src/testdir/opt_test.vim
+src/testdir/failed
+src/testdir/starttime
+runtime/indent/testdir/*.out
+runtime/indent/testdir/*.fail
+src/memfile_test
+src/json_test
+src/message_test
+src/kword_test
+
+runtime/syntax/testdir/Xfilter
+runtime/syntax/testdir/done/
+runtime/syntax/testdir/failed/
+runtime/syntax/testdir/messages
+runtime/syntax/testdir/testdeps.mk
+runtime/syntax/testdir/vimcmd
+
+# Generated by "make install"
+runtime/doc/doctags
+runtime/doc/tags-*
+
+# Temporarily generated by "runtime/syntax/generator/make"
+runtime/syntax/generator/generator.err
+runtime/syntax/generator/sanity_check.err
+runtime/syntax/generator/vim.vim.rc
+
+# Generated by "make shadow".  The directory names could be anything but we
+# restrict them to shadow (the default) or shadow-*
+src/shadow
+src/shadow-*
+src/runtime
+src/pixmaps
+src/LICENSE
+src/README.txt
+
+# other files possibly created by tools
+src/cscope.out
+
+# Linter/language server files
+.cache/clangd/
+.ccls-cache/
+compile_commands.json

CONTRIBUTING.md

@@ -0,0 +1,115 @@
+# Contributing to Vim
+
+Patches are welcome in whatever form.
+Discussions about patches happen on the [vim-dev][0] mailing list.
+If you create a pull request on GitHub it will be
+forwarded to the vim-dev mailing list.  You can also send your patch there
+directly (but please note, the initial posting is subject to moderation).
+In that case an attachment with a unified diff format is preferred.
+Information about the mailing list can be found [on the Vim website][0]
+
+A pull request has the advantage that it will trigger the Continuous
+Integration tests, you will be warned of problems (you can ignore the coverage
+warning, it's noisy).
+
+Please consider adding a test.  All new functionality should be tested and bug
+fixes should be tested for regressions: the test should fail before the fix and
+pass after the fix.  Look through recent patches for examples and find help
+with ":help testing".  The tests are located under "src/testdir".
+
+Contributions will be distributed with Vim under the Vim license.  Providing a
+change to be included implies that you agree with this and your contribution
+does not cause us trouble with trademarks or patents.  There is no CLA to sign.
+
+# Reporting issues
+
+We use GitHub issues, but that is not a requirement.  Writing to the Vim
+mailing list is also fine.
+
+Please use the GitHub issues only for actual issues. If you are not 100% sure
+that your problem is a Vim issue, please first discuss this on the Vim user
+mailing list.  Try reproducing the problem without any of your plugins or settings:
+
+    vim --clean
+
+If you report an issue, please describe exactly how to reproduce it.
+For example, don't say "insert some text" but say what you did exactly:
+`ahere is some text<Esc>`.
+Ideally, the steps you list can be used to write a test to verify the problem
+is fixed.
+
+Feel free to report even the smallest problem, also typos in the documentation.
+
+You can find known issues in the todo file: `:help todo`.
+Or open [the todo file][todo list] on GitHub to see the latest version.
+
+# Syntax, indent and other runtime files
+
+The latest version of these files can be obtained from the repository.
+They are usually not updated with numbered patches. However, they may 
+or may not work with older Vim releases (since they may contain new features).
+
+If you find a problem with one of these files or have a suggestion for
+improvement, please first try to contact the maintainer directly.
+Look in the header of the file for the name, email address, github handle and/or
+upstream repository.  You may also check the [MAINTAINERS][11] file.
+
+The maintainer will take care of issues and send updates to the Vim project for
+distribution with Vim.
+
+If the maintainer does not respond, contact the [vim-dev][0] mailing list.
+
+## Contributing new runtime files
+
+If you want to contribute new runtime files for Vim or Neovim, please create a
+PR with your changes against this repository here. For new filetypes, do not forget:
+* to add a new [filetype test][12] (keep it similar to the other filetype tests).
+* all configuration switches should be documented
+  (check [filetype.txt][13] and/or [syntax.txt][14] for filetype and syntax plugins)
+* add yourself as Maintainer to the top of file (again, keep the header similar to
+  other runtime files)
+* add yourself to the [MAINTAINERS][11] file.
+
+# Translations
+
+Translating messages and runtime files is very much appreciated!  These things
+can be translated:
+*   Messages in Vim, see [src/po/README.txt][1]
+    Also used for the desktop icons.
+*   Menus, see [runtime/lang/README.txt][2]
+*   Vim tutor, see [runtime/tutor/README.txt][3]
+*   Manual pages, see [runtime/doc/\*.1][4] for examples
+*   Installer, see [nsis/lang/README.txt][5]
+
+The help files can be translated and made available separately.
+See https://www.vim.org/translations.php for examples.
+
+# How do I contribute to the project?
+
+Please have a look at the following [discussion][6], which should give you some
+ideas. Please also check the [develop.txt][7] helpfile for the recommended
+style. Often it's also beneficial to check the surrounding code for the style
+being used.
+
+# I have a question
+
+If you have some question on the style guide, please contact the [vim-dev][0]
+mailing list. For other questions please use the [Vi Stack Exchange][8] website, the
+[vim-use][9] mailing list or make use of the [discussion][10] feature here at github.
+
+[todo list]: https://github.com/vim/vim/blob/master/runtime/doc/todo.txt
+[0]: http://www.vim.org/maillist.php#vim-dev
+[1]: https://github.com/vim/vim/blob/master/src/po/README.txt
+[2]: https://github.com/vim/vim/blob/master/runtime/lang/README.txt
+[3]: https://github.com/vim/vim/blob/master/runtime/tutor/README.txt
+[4]: https://github.com/vim/vim/blob/master/runtime/doc/vim.1
+[5]: https://github.com/vim/vim/blob/master/nsis/lang/README.txt
+[6]: https://github.com/vim/vim/discussions/13087
+[7]: https://github.com/vim/vim/blob/master/runtime/doc/develop.txt
+[8]: https://vi.stackexchange.com
+[9]: http://www.vim.org/maillist.php#vim-use
+[10]: https://github.com/vim/vim/discussions
+[11]: https://github.com/vim/vim/blob/master/.github/MAINTAINERS
+[12]: https://github.com/vim/vim/blob/master/src/testdir/test_filetype.vim
+[13]: https://github.com/vim/vim/blob/master/runtime/doc/filetype.txt
+[14]: https://github.com/vim/vim/blob/master/runtime/doc/syntax.txt

LICENSE

@@ -0,0 +1,78 @@
+VIM LICENSE
+
+I)  There are no restrictions on distributing unmodified copies of Vim except
+    that they must include this license text.  You can also distribute
+    unmodified parts of Vim, likewise unrestricted except that they must
+    include this license text.  You are also allowed to include executables
+    that you made from the unmodified Vim sources, plus your own usage
+    examples and Vim scripts.
+
+II) It is allowed to distribute a modified (or extended) version of Vim,
+    including executables and/or source code, when the following four
+    conditions are met:
+    1) This license text must be included unmodified.
+    2) The modified Vim must be distributed in one of the following five ways:
+       a) If you make changes to Vim yourself, you must clearly describe in
+          the distribution how to contact you.  When the maintainer asks you
+          (in any way) for a copy of the modified Vim you distributed, you
+          must make your changes, including source code, available to the
+          maintainer without fee.  The maintainer reserves the right to
+          include your changes in the official version of Vim.  What the
+          maintainer will do with your changes and under what license they
+          will be distributed is negotiable.  If there has been no negotiation
+          then this license, or a later version, also applies to your changes.
+          The current maintainers are listed here: https://github.com/orgs/vim/people.
+          If this changes it will be announced in appropriate places (most likely
+          vim.sf.net, www.vim.org and/or comp.editors). When it is completely
+          impossible to contact the maintainer, the obligation to send him
+          your changes ceases.  Once the maintainer has confirmed that he has
+          received your changes they will not have to be sent again.
+       b) If you have received a modified Vim that was distributed as
+          mentioned under a) you are allowed to further distribute it
+          unmodified, as mentioned at I).  If you make additional changes the
+          text under a) applies to those changes.
+       c) Provide all the changes, including source code, with every copy of
+          the modified Vim you distribute.  This may be done in the form of a
+          context diff.  You can choose what license to use for new code you
+          add.  The changes and their license must not restrict others from
+          making their own changes to the official version of Vim.
+       d) When you have a modified Vim which includes changes as mentioned
+          under c), you can distribute it without the source code for the
+          changes if the following three conditions are met:
+          - The license that applies to the changes permits you to distribute
+            the changes to the Vim maintainer without fee or restriction, and
+            permits the Vim maintainer to include the changes in the official
+            version of Vim without fee or restriction.
+          - You keep the changes for at least three years after last
+            distributing the corresponding modified Vim.  When the maintainer
+            or someone who you distributed the modified Vim to asks you (in
+            any way) for the changes within this period, you must make them
+            available to him.
+          - You clearly describe in the distribution how to contact you.  This
+            contact information must remain valid for at least three years
+            after last distributing the corresponding modified Vim, or as long
+            as possible.
+       e) When the GNU General Public License (GPL) applies to the changes,
+          you can distribute the modified Vim under the GNU GPL version 2 or
+          any later version.
+    3) A message must be added, at least in the output of the ":version"
+       command and in the intro screen, such that the user of the modified Vim
+       is able to see that it was modified.  When distributing as mentioned
+       under 2)e) adding the message is only required for as far as this does
+       not conflict with the license used for the changes.
+    4) The contact information as required under 2)a) and 2)d) must not be
+       removed or changed, except that the person himself can make
+       corrections.
+
+III) If you distribute a modified version of Vim, you are encouraged to use
+     the Vim license for your changes and make them available to the
+     maintainer, including the source code.  The preferred way to do this is
+     by e-mail or by uploading the files to a server and e-mailing the URL.
+     If the number of changes is small (e.g., a modified Makefile) e-mailing a
+     context diff will do.  The e-mail address to be used is
+     <maintainer@vim.org>
+
+IV)  It is not allowed to remove this license from the distribution of the Vim
+     sources, parts of it or from a modified version.  You may use this
+     license for previous Vim releases instead of the license that they came
+     with, at your option.

Makefile

@@ -0,0 +1,563 @@
+# This Makefile has two purposes:
+# 1. Starting the compilation of Vim for Unix.
+# 2. Creating the various distribution files.
+
+
+#########################################################################
+# 1. Starting the compilation of Vim for Unix.
+#
+# Using this Makefile without an argument will compile Vim for Unix.
+# "make install" is also possible.
+#
+# NOTE: If this doesn't work properly, first change directory to "src" and use
+# the Makefile there:
+#	cd src
+#	make [arguments]
+# Noticed on AIX systems when using this Makefile: Trying to run "cproto" or
+# something else after Vim has been compiled.  Don't know why...
+# Noticed on OS/390 Unix: Restarts configure.
+#
+# The first (default) target is "first".  This will result in running
+# "make first", so that the target from "src/auto/config.mk" is picked
+# up properly when config didn't run yet.  Doing "make all" before configure
+# has run can result in compiling with $(CC) empty.
+
+first:
+	@if test ! -f src/auto/config.mk; then \
+		cp src/config.mk.dist src/auto/config.mk; \
+	fi
+	@echo "Starting make in the src directory."
+	@echo "If there are problems, cd to the src directory and run make there"
+	cd src && $(MAKE) $@
+
+# Some make programs use the last target for the $@ default; put the other
+# targets separately to always let $@ expand to "first" by default.
+all install uninstall tools config configure reconfig proto depend lint tags types test scripttests testtiny test_libvterm unittests testclean clean distclean:
+	@if test ! -f src/auto/config.mk; then \
+		cp src/config.mk.dist src/auto/config.mk; \
+	fi
+	@echo "Starting make in the src directory."
+	@echo "If there are problems, cd to the src directory and run make there"
+	cd src && $(MAKE) $@
+	@# When the target is "test" also run the indent and syntax tests.
+	@if test "$@" = "test" -o "$@" = "testtiny"; then \
+		$(MAKE) indenttest; \
+		$(MAKE) syntaxtest; \
+	fi
+	@# When the target is "clean" also clean for the indent and syntax tests.
+	@if test "$@" = "clean" -o "$@" = "distclean" -o "$@" = "testclean"; then \
+		(cd runtime/indent && $(MAKE) clean); \
+		(cd runtime/syntax && $(MAKE) clean); \
+	fi
+
+# Executable used for running the indent tests.
+VIM_FOR_INDENTTEST = ../../src/vim
+
+indenttest:
+	cd runtime/indent && \
+		$(MAKE) clean && \
+		$(MAKE) test VIMPROG="$(VIM_FOR_INDENTTEST)"
+
+# Executable used for running the syntax tests.
+VIM_FOR_SYNTAXTEST = ../../src/vim
+
+# (For local testing only with GNU Make.)
+VIM_SYNTAX_TEST_FILTER =
+VIM_SYNTAX_TEST_WAIT_TIME =
+
+syntaxtest:
+	cd runtime/syntax && \
+		$(MAKE) clean && \
+		$(MAKE) test VIMPROG="$(VIM_FOR_SYNTAXTEST)"
+
+
+#########################################################################
+# 2. Creating the various distribution files.
+#
+# TARGET	PRODUCES		CONTAINS
+# unixall	vim-#.#.tar.bz2		All runtime files and sources, for Unix
+#
+# html		vim##html.zip		HTML docs
+#
+# dossrc	vim##src.zip		sources for MS-DOS
+# dosrt		vim##rt.zip		runtime for MS-DOS
+# dosbin	vim##w32.zip		binary for Win32
+#		gvim##.zip		binary for GUI Win32
+#		gvim##ole.zip		OLE exe for Win32 GUI
+#
+# OBSOLETE
+# amisrc	vim##src.tgz		sources for Amiga
+# amirt		vim##rt.tgz		runtime for Amiga
+# amibin	vim##bin.tgz		binary for Amiga
+#
+# farsi		farsi##.zip		Farsi fonts
+#
+#    All output files are created in the "dist" directory.  Existing files are
+#    overwritten!
+#    To do all this you need the Unix archive and compiled binaries.
+#    Before creating an archive first delete all backup files, *.orig, etc.
+
+MAJOR = 9
+MINOR = 1
+
+# CHECKLIST for creating a new version:
+#
+# - Update Vim version number.  For a test version in: src/version.h,
+#   READMEdir/Contents, MAJOR/MINOR above, VIMMAJOR and VIMMINOR in
+#   src/Makefile, README.txt, README.md, src/README.md, READMEdir/README*.txt,
+#   runtime/doc/*.txt and make nsis/gvim_version.nsh.
+#   For a minor/major version: src/GvimExt/GvimExt.reg, src/vim.manifest.
+# - Compile Vim with GTK, Perl, Python, Python3, TCL, Ruby, Lua, Cscope and
+#   "huge" features.  Add MZscheme if you can make it work.
+#   Use "make reconfig" after selecting the configure arguments.
+# - With these features: "make proto" (requires cproto and Motif installed;
+#   ignore warnings for missing include files, fix problems for syntax errors).
+# - With these features: "make depend" (works best with gcc).
+# - If you have a lint program: "make lint" and check the output (ignore GTK
+#   warnings).
+# - If you have valgrind, enable it in src/testdir/Makefile and run "make
+#   test".  Enable EXITFREE, disable GUI, scheme and tcl to avoid false alarms.
+#   Check the valgrind output.
+# - Adjust the date and other info in src/version.h.
+# - Correct included_patches[] in src/version.c.
+# - Check for missing entries in runtime/makemenu.vim (with checkmenu script).
+# - Check for missing options in runtime/optwin.vim et al. (with check.vim).
+# - Do "make menu" to update the runtime/synmenu.vim file.
+# - Add remarks for changes to runtime/doc/version9.txt.
+# - Check that runtime/doc/help.txt doesn't contain entries in "LOCAL
+#   ADDITIONS".
+# - In runtime/doc run "make" and "make html" to check for errors.
+# - Check if src/Makefile, src/testdir/Makefile and src/feature.h don't contain
+#   any personal preferences or the changes mentioned above.
+# - Check file protections to be "644" for text and "755" for executables (run
+#   the "check" script).
+# - Check compiling on Amiga, MS-DOS and MS-Windows.
+# - Delete all *~, *.sw?, *.orig, *.rej files
+# - "make unixall", "make html"
+# - Make diff files against the previous release: "makediff7 7.1 7.2"
+#
+# Amiga: (OBSOLETE, Amiga files are no longer distributed)
+# - "make amisrc", move the archive to the Amiga and compile:
+#   "make -f Make_manx.mak" (will use "big" features by default).
+# - Run the tests: "make -f Make_manx.mak test"
+# - Place the executables Vim and Xxd in this directory (set the executable
+#   flag).
+# - "make amirt", "make amibin".
+#
+# MS-Windows:
+# - Run make on Unix to update the ".mo" files.
+# - Get 32 bit libintl-8.dll, libiconv-2.dll and libgcc_s_sjlj-1.dll. E.g. from
+#   https://mlocati.github.io/gettext-iconv-windows/ .
+#   Use the "shared-32.zip file and extract the archive to get the files.
+#   Put them in the gettext32 directory, "make dosrt" uses them.
+# - Get 64 bit libintl-8.dll and libiconv-2.dll. E.g. from
+#   https://mlocati.github.io/gettext-iconv-windows/ .
+#   Use the "shared-64.zip file and extract the archive to get the files.
+#   Put them in the gettext64 directory, "make dosrt" uses them.
+# - > make dossrc
+#   > make dosrt
+#   Unpack dist/vim##rt.zip and dist/vim##src.zip on an MS-Windows PC.
+#   This creates the directory vim/vim91 and puts all files in there.
+# Win32 console version build:
+# - See src/INSTALLpc.txt for installing the compiler and SDK.
+# - Set environment for Visual C++ 2015:
+#   > cd src
+#   > msvc-latest.bat
+# - Build the console binary:
+#   > nmake.exe -f Make_mvc.mak
+# - Run the tests and check the output:
+#   > nmake.exe -f Make_mvc.mak testclean
+#   > nmake.exe -f Make_mvc.mak test
+# - Rename (using ../tools/rename.bat):
+#           vim.exe to vimw32.exe
+#           tee/tee.exe to teew32.exe
+#           xxd/xxd.exe to xxdw32.exe
+#           vim.pdb to vimw32.pdb
+#           install.exe to installw32.exe
+#           uninstall.exe to uninstallw32.exe
+# Win32 GUI version build:
+# - > cd src
+#   > nmake.exe -f Make_mvc.mak "GUI=yes"
+# - Run the tests and check the output:
+#   > nmake.exe -f Make_mvc.mak testclean
+#   > nmake.exe -f Make_mvc.mak testgvim
+# - move "gvim.exe" to here (otherwise the OLE version will overwrite it).
+# - Move gvim.pdb to here.
+# - Copy "GvimExt/gvimext.dll" to here.
+# - Delete vimrun.exe, install.exe and uninstall.exe.
+# Win32 GUI version with OLE, PERL, Ruby, TCL, PYTHON and dynamic IME:
+# - Install the interfaces you want, see src/INSTALLpc.txt
+#   Adjust bigvim.bat to match the version of each interface you want.
+# - Build:
+#   > cd src
+#   > bigvim.bat
+# - Run the tests:
+#   > nmake.exe -f Make_mvc.mak testclean
+#   > nmake.exe -f Make_mvc.mak testgvim
+#   - check the output.
+# - Rename "gvim.exe" to "gvim_ole.exe".
+# - Rename gvim.pdb to "gvim_ole.pdb".
+# - Delete install.exe and uninstall.exe.
+# Create the archives:
+# - Copy all the "*.exe" files to where this Makefile is.
+# - Copy all the "*.pdb" files to where this Makefile is.
+# - in this directory:
+#   > make dosbin
+# NSIS self installing exe:
+# - To get NSIS see http://nsis.sourceforge.net
+# - Make sure gvim_ole.exe, vimw32.exe, installw32.exe,
+#   uninstallw32.exe, teew32.exe and xxdw32.exe have been build as mentioned
+#   above.
+# - copy these files (get them from a binary archive or build them):
+#	gvimext.dll in src/GvimExt
+#	gvimext64.dll in src/GvimExt
+#   gvimext64.dll can be obtained from:
+#   https://github.com/vim/vim-win32-installer/releases
+#	It is part of gvim_9.1.*_x64.zip as vim/vim91/GvimExt/gvimext64.dll.
+# - Make sure there is a diff.exe two levels up (get it from a previous Vim
+#   version).  Also put winpty32.dll and winpty-agent.exe there.
+# - go to ../nsis and do:
+#   > nmake.exe -f Make_mvc.mak all
+#    (takes a few minutes).
+#    See nsis/README.txt for details.
+# - Copy gvim##.exe to the dist directory.
+#
+# 64 bit builds (these are not in the normal distribution, the 32 bit build
+# works just fine on 64 bit systems).
+# Like the console and GUI version, but first run vcvars64.bat or
+#   "..\VC\vcvarsall.bat x86_amd64".
+# - Build the console version:
+#   > nmake.exe -f Make_mvc.mak
+# - Build the GUI version:
+#   > nmake.exe -f Make_mvc.mak "GUI=yes"
+# - Build the OLE version with interfaces:
+#   > bigvim64.bat
+#
+#
+# OBSOLETE systems: You can build these if you have an appropriate system.
+#
+# 16 bit DOS version: You need to get a very old version of Vim, for several
+# years even the tiny build is too big to fit in DOS memory.
+#
+# 32 bit DOS version: Support was removed in 7.4.1399.  When syncing to before
+# that it probably won't build.
+#
+# Win32s GUI version: Support was removed in patch 7.4.1364.
+#
+# OS/2 support was removed in patch 7.4.1008.  If you want to give it a try
+# sync to before that and check the old version of this Makefile for
+# instructions.
+
+VIMVER	= vim-$(MAJOR).$(MINOR)
+VERSION = $(MAJOR)$(MINOR)
+VDOT	= $(MAJOR).$(MINOR)
+VIMRTDIR = vim$(VERSION)
+
+# How to include Filelist depends on the version of "make" you have.
+# If the current choice doesn't work, try the other one.
+
+include Filelist
+#.include "Filelist"
+
+
+# All output is put in the "dist" directory.
+dist:
+	mkdir dist
+
+# Clean up some files to avoid they are included.
+# Copy README files to the top directory.
+prepare:
+	if test -f lang/LICENSE.nsis.txt; then \
+		rm -f lang/LICENSE*.nsis.txt; fi
+	for name in $(IN_README_DIR); do \
+	  cp READMEdir/"$$name" .; \
+	  done
+
+# For the zip files we need to create a file with the comment line
+dist/comment:
+	mkdir dist/comment
+
+COMMENT_RT = comment/$(VERSION)-rt
+COMMENT_W32 = comment/$(VERSION)-bin-w32
+COMMENT_GVIM = comment/$(VERSION)-bin-gvim
+COMMENT_OLE = comment/$(VERSION)-bin-ole
+COMMENT_SRC = comment/$(VERSION)-src
+COMMENT_HTML = comment/$(VERSION)-html
+COMMENT_FARSI = comment/$(VERSION)-farsi
+
+dist/$(COMMENT_RT): dist/comment
+	echo "Vim - Vi IMproved - v$(VDOT) runtime files for MS-DOS and MS-Windows" > dist/$(COMMENT_RT)
+
+dist/$(COMMENT_W32): dist/comment
+	echo "Vim - Vi IMproved - v$(VDOT) binaries for MS-Windows" > dist/$(COMMENT_W32)
+
+dist/$(COMMENT_GVIM): dist/comment
+	echo "Vim - Vi IMproved - v$(VDOT) GUI binaries for MS-Windows" > dist/$(COMMENT_GVIM)
+
+dist/$(COMMENT_OLE): dist/comment
+	echo "Vim - Vi IMproved - v$(VDOT) MS-Windows GUI binaries with OLE support" > dist/$(COMMENT_OLE)
+
+dist/$(COMMENT_SRC): dist/comment
+	echo "Vim - Vi IMproved - v$(VDOT) sources for MS-DOS and MS-Windows" > dist/$(COMMENT_SRC)
+
+dist/$(COMMENT_HTML): dist/comment
+	echo "Vim - Vi IMproved - v$(VDOT) documentation in HTML" > dist/$(COMMENT_HTML)
+
+dist/$(COMMENT_FARSI): dist/comment
+	echo "Vim - Vi IMproved - v$(VDOT) Farsi language files" > dist/$(COMMENT_FARSI)
+
+unixall: dist prepare
+	-rm -f dist/$(VIMVER).tar.bz2
+	-rm -rf dist/$(VIMRTDIR)
+	mkdir dist/$(VIMRTDIR)
+	tar cf - \
+		$(RT_ALL) \
+		$(RT_ALL_BIN) \
+		$(RT_UNIX) \
+		$(RT_UNIX_DOS_BIN) \
+		$(RT_SCRIPTS) \
+		$(LANG_GEN) \
+		$(LANG_GEN_BIN) \
+		$(SRC_ALL) \
+		$(SRC_UNIX) \
+		$(SRC_DOS_UNIX) \
+		$(EXTRA) \
+		$(LANG_SRC) \
+		| (cd dist/$(VIMRTDIR); tar xf -)
+	-rm $(IN_README_DIR)
+# Need to use a "distclean" config.mk file
+# Note: this file is not included in the repository to avoid problems, but it's
+# OK to put it in the archive.
+	cp -f src/config.mk.dist dist/$(VIMRTDIR)/src/auto/config.mk
+# Create an empty config.h file, make dependencies require it
+	touch dist/$(VIMRTDIR)/src/auto/config.h
+# Make sure configure is newer than config.mk to force it to be generated
+	touch dist/$(VIMRTDIR)/src/configure
+# Make sure ja.sjis.po is newer than ja.po to avoid it being regenerated.
+# Same for cs.cp1250.po, pl.cp1250.po and sk.cp1250.po.
+	touch dist/$(VIMRTDIR)/src/po/ja.sjis.po
+	touch dist/$(VIMRTDIR)/src/po/cs.cp1250.po
+	touch dist/$(VIMRTDIR)/src/po/pl.cp1250.po
+	touch dist/$(VIMRTDIR)/src/po/sk.cp1250.po
+	touch dist/$(VIMRTDIR)/src/po/zh_CN.cp936.po
+	touch dist/$(VIMRTDIR)/src/po/ru.cp1251.po
+	touch dist/$(VIMRTDIR)/src/po/uk.cp1251.po
+# Create the archive.
+	cd dist && tar cf $(VIMVER).tar $(VIMRTDIR)
+	bzip2 dist/$(VIMVER).tar
+
+# Amiga runtime - OBSOLETE
+amirt: dist prepare
+	-rm -f dist/vim$(VERSION)rt.tar.gz
+	-rm -rf dist/Vim
+	mkdir dist/Vim
+	mkdir dist/Vim/$(VIMRTDIR)
+	tar cf - \
+		$(ROOT_AMI) \
+		$(RT_ALL) \
+		$(RT_ALL_BIN) \
+		$(RT_SCRIPTS) \
+		$(RT_AMI) \
+		$(RT_NO_UNIX) \
+		$(RT_AMI_DOS) \
+		| (cd dist/Vim/$(VIMRTDIR); tar xf -)
+	-rm $(IN_README_DIR)
+	mv dist/Vim/$(VIMRTDIR)/vimdir.info dist/Vim.info
+	mv dist/Vim/$(VIMRTDIR)/runtime.info dist/Vim/$(VIMRTDIR).info
+	mv dist/Vim/$(VIMRTDIR)/runtime/* dist/Vim/$(VIMRTDIR)
+	rmdir dist/Vim/$(VIMRTDIR)/runtime
+	cd dist && tar cf vim$(VERSION)rt.tar Vim Vim.info
+	gzip -9 dist/vim$(VERSION)rt.tar
+	mv dist/vim$(VERSION)rt.tar.gz dist/vim$(VERSION)rt.tgz
+
+# Amiga binaries - OBSOLETE
+amibin: dist prepare
+	-rm -f dist/vim$(VERSION)bin.tar.gz
+	-rm -rf dist/Vim
+	mkdir dist/Vim
+	mkdir dist/Vim/$(VIMRTDIR)
+	tar cf - \
+		$(ROOT_AMI) \
+		$(BIN_AMI) \
+		Vim \
+		Xxd \
+		| (cd dist/Vim/$(VIMRTDIR); tar xf -)
+	-rm $(IN_README_DIR)
+	mv dist/Vim/$(VIMRTDIR)/vimdir.info dist/Vim.info
+	mv dist/Vim/$(VIMRTDIR)/runtime.info dist/Vim/$(VIMRTDIR).info
+	cd dist && tar cf vim$(VERSION)bin.tar Vim Vim.info
+	gzip -9 dist/vim$(VERSION)bin.tar
+	mv dist/vim$(VERSION)bin.tar.gz dist/vim$(VERSION)bin.tgz
+
+# Amiga sources - OBSOLETE
+amisrc: dist prepare
+	-rm -f dist/vim$(VERSION)src.tar.gz
+	-rm -rf dist/Vim
+	mkdir dist/Vim
+	mkdir dist/Vim/$(VIMRTDIR)
+	tar cf - \
+		$(ROOT_AMI) \
+		$(SRC_ALL) \
+		$(SRC_AMI) \
+		$(SRC_AMI_DOS) \
+		| (cd dist/Vim/$(VIMRTDIR); tar xf -)
+	-rm $(IN_README_DIR)
+	mv dist/Vim/$(VIMRTDIR)/vimdir.info dist/Vim.info
+	mv dist/Vim/$(VIMRTDIR)/runtime.info dist/Vim/$(VIMRTDIR).info
+	cd dist && tar cf vim$(VERSION)src.tar Vim Vim.info
+	gzip -9 dist/vim$(VERSION)src.tar
+	mv dist/vim$(VERSION)src.tar.gz dist/vim$(VERSION)src.tgz
+
+# MS-DOS sources
+dossrc: dist dist/$(COMMENT_SRC) license nsis/gvim_version.nsh
+	-rm -rf dist/vim$(VERSION)src.zip
+	-rm -rf dist/vim
+	mkdir dist/vim
+	mkdir dist/vim/$(VIMRTDIR)
+	tar cf - \
+		$(SRC_ALL) \
+		$(SRC_DOS) \
+		$(SRC_DOS_BIN) \
+		$(SRC_AMI_DOS) \
+		$(SRC_DOS_UNIX) \
+		lang/LICENSE.*.txt \
+		lang/README.*.txt \
+		nsis/gvim_version.nsh \
+		| (cd dist/vim/$(VIMRTDIR); tar xf -)
+	mv dist/vim/$(VIMRTDIR)/runtime/* dist/vim/$(VIMRTDIR)
+	rmdir dist/vim/$(VIMRTDIR)/runtime
+	cd dist && zip -9 -rD -z vim$(VERSION)src.zip vim <$(COMMENT_SRC)
+
+license:
+	cd nsis && $(MAKE) -f Makefile $@
+
+nsis/gvim_version.nsh: Makefile
+	cd nsis && $(MAKE) -f Makefile $(@F)
+
+dosrt: dist dist/$(COMMENT_RT) dosrt_files
+	-rm -rf dist/vim$(VERSION)rt.zip
+	cd dist && zip -9 -rD -z vim$(VERSION)rt.zip vim <$(COMMENT_RT)
+
+# Split in two parts to avoid an "argument list too long" error.
+# We no longer convert the files from unix to dos fileformat.
+dosrt_files: dist prepare
+	-rm -rf dist/vim
+	mkdir dist/vim
+	mkdir dist/vim/$(VIMRTDIR)
+	mkdir dist/vim/$(VIMRTDIR)/lang
+	cd src && MAKEMO=yes $(MAKE) languages
+	tar cf - \
+		$(RT_ALL) \
+		| (cd dist/vim/$(VIMRTDIR); tar xf -)
+	tar cf - \
+		$(RT_SCRIPTS) \
+		$(RT_DOS) \
+		$(RT_NO_UNIX) \
+		$(RT_AMI_DOS) \
+		$(LANG_GEN) \
+		| (cd dist/vim/$(VIMRTDIR); tar xf -)
+	tar cf - \
+		$(RT_UNIX_DOS_BIN) \
+		$(RT_ALL_BIN) \
+		$(RT_DOS_BIN) \
+		$(LANG_GEN_BIN) \
+		| (cd dist/vim/$(VIMRTDIR); tar xf -)
+	-rm $(IN_README_DIR)
+	mv dist/vim/$(VIMRTDIR)/runtime/* dist/vim/$(VIMRTDIR)
+	rmdir dist/vim/$(VIMRTDIR)/runtime
+# Add the message translations.  Trick: skip ja.mo/ja.euc-jp.mo and use
+# ja.sjis.mo instead.  Same for cs.mo / cs.cp1250.mo, pl.mo / pl.cp1250.mo,
+# sk.mo / sk.cp1250.mo, zh_CN.mo / zh_CN.cp936.mo, uk.mo / uk.cp1251.mo and
+# ru.mo / ru.cp1251.mo.
+	for i in $(LANG_DOS); do \
+	      if test "$$i" != "src/po/ja.mo" -a "$$i" != "src/po/ja.euc-jp.mo" -a "$$i" != "src/po/pl.mo" -a "$$i" != "src/po/cs.mo" -a "$$i" != "src/po/sk.mo" -a "$$i" != "src/po/zh_CN.mo" -a "$$i" != "src/po/ru.mo" -a "$$i" != "src/po/uk.mo"; then \
+		n=`echo $$i | sed -e "s+src/po/\([-a-zA-Z0-9_]*\(.UTF-8\)*\)\(.sjis\)*\(.cp1250\)*\(.cp1251\)*\(.cp936\)*.mo+\1+"`; \
+		mkdir dist/vim/$(VIMRTDIR)/lang/$$n; \
+		mkdir dist/vim/$(VIMRTDIR)/lang/$$n/LC_MESSAGES; \
+		cp $$i dist/vim/$(VIMRTDIR)/lang/$$n/LC_MESSAGES/vim.mo; \
+	      fi \
+	    done
+	mkdir dist/vim/$(VIMRTDIR)/gettext32
+	cp gettext32/libintl-8.dll dist/vim/$(VIMRTDIR)/gettext32/
+	cp gettext32/libiconv-2.dll dist/vim/$(VIMRTDIR)/gettext32/
+	cp gettext32/libgcc_s_sjlj-1.dll dist/vim/$(VIMRTDIR)/gettext32/
+	mkdir dist/vim/$(VIMRTDIR)/gettext64
+	cp gettext64/libintl-8.dll dist/vim/$(VIMRTDIR)/gettext64/
+	cp gettext64/libiconv-2.dll dist/vim/$(VIMRTDIR)/gettext64/
+
+
+# Used before uploading.  Don't delete the AAPDIR/sign files!
+runtime_unix2dos: dosrt_files
+	-rm -rf `find runtime/dos -type f -print | sed -e /AAPDIR/d`
+	cd dist/vim/$(VIMRTDIR); tar cf - * \
+		| (cd ../../../runtime/dos; tar xf -)
+
+dosbin: prepare dosbin_gvim dosbin_w32 dosbin_ole $(DOSBIN_S)
+	-rm $(IN_README_DIR)
+
+# make Win32 gvim
+dosbin_gvim: dist dist/$(COMMENT_GVIM)
+	-rm -rf dist/gvim$(VERSION).zip
+	-rm -rf dist/vim
+	mkdir dist/vim
+	mkdir dist/vim/$(VIMRTDIR)
+	tar cf - \
+		$(BIN_DOS) \
+		| (cd dist/vim/$(VIMRTDIR); tar xf -)
+	cp gvim.exe dist/vim/$(VIMRTDIR)/gvim.exe
+	cp teew32.exe dist/vim/$(VIMRTDIR)/tee.exe
+	cp xxdw32.exe dist/vim/$(VIMRTDIR)/xxd.exe
+	cp vimrun.exe dist/vim/$(VIMRTDIR)/vimrun.exe
+	cp installw32.exe dist/vim/$(VIMRTDIR)/install.exe
+	cp uninstallw32.exe dist/vim/$(VIMRTDIR)/uninstall.exe
+	mkdir dist/vim/$(VIMRTDIR)/GvimExt32
+	cp gvimext.dll dist/vim/$(VIMRTDIR)/GvimExt32/gvimext.dll
+	mkdir dist/vim/$(VIMRTDIR)/GvimExt64
+	cp gvimext64.dll dist/vim/$(VIMRTDIR)/GvimExt64/gvimext.dll
+	cd dist && zip -9 -rD -z gvim$(VERSION).zip vim <$(COMMENT_GVIM)
+	cp gvim.pdb dist/gvim$(VERSION).pdb
+
+# make Win32 console
+dosbin_w32: dist dist/$(COMMENT_W32)
+	-rm -rf dist/vim$(VERSION)w32.zip
+	-rm -rf dist/vim
+	mkdir dist/vim
+	mkdir dist/vim/$(VIMRTDIR)
+	tar cf - \
+		$(BIN_DOS) \
+		| (cd dist/vim/$(VIMRTDIR); tar xf -)
+	cp vimw32.exe dist/vim/$(VIMRTDIR)/vim.exe
+	cp teew32.exe dist/vim/$(VIMRTDIR)/tee.exe
+	cp xxdw32.exe dist/vim/$(VIMRTDIR)/xxd.exe
+	cp installw32.exe dist/vim/$(VIMRTDIR)/install.exe
+	cp uninstallw32.exe dist/vim/$(VIMRTDIR)/uninstall.exe
+	cd dist && zip -9 -rD -z vim$(VERSION)w32.zip vim <$(COMMENT_W32)
+	cp vimw32.pdb dist/vim$(VERSION)w32.pdb
+
+# make Win32 gvim with OLE
+dosbin_ole: dist dist/$(COMMENT_OLE)
+	-rm -rf dist/gvim$(VERSION)ole.zip
+	-rm -rf dist/vim
+	mkdir dist/vim
+	mkdir dist/vim/$(VIMRTDIR)
+	tar cf - \
+		$(BIN_DOS) \
+		| (cd dist/vim/$(VIMRTDIR); tar xf -)
+	cp gvim_ole.exe dist/vim/$(VIMRTDIR)/gvim.exe
+	cp teew32.exe dist/vim/$(VIMRTDIR)/tee.exe
+	cp xxdw32.exe dist/vim/$(VIMRTDIR)/xxd.exe
+	cp vimrun.exe dist/vim/$(VIMRTDIR)/vimrun.exe
+	cp installw32.exe dist/vim/$(VIMRTDIR)/install.exe
+	cp uninstallw32.exe dist/vim/$(VIMRTDIR)/uninstall.exe
+	cp gvimext.dll dist/vim/$(VIMRTDIR)/gvimext.dll
+	cp README_ole.txt dist/vim/$(VIMRTDIR)
+	cd dist && zip -9 -rD -z gvim$(VERSION)ole.zip vim <$(COMMENT_OLE)
+	cp gvim_ole.pdb dist/gvim$(VERSION)ole.pdb
+
+html: dist dist/$(COMMENT_HTML)
+	-rm -rf dist/vim$(VERSION)html.zip
+	cd runtime/doc && zip -9 -z ../../dist/vim$(VERSION)html.zip *.html <../../dist/$(COMMENT_HTML)
+
+farsi: dist dist/$(COMMENT_FARSI)
+	-rm -f dist/farsi$(VERSION).zip
+	zip -9 -rD -z dist/farsi$(VERSION).zip farsi < dist/$(COMMENT_FARSI)

README.md

@@ -0,0 +1,153 @@
+# [![Vim The editor](https://github.com/vim/vim/raw/master/runtime/vimlogo.gif)](https://www.vim.org)
+
+[![Github Build status](https://github.com/vim/vim/workflows/GitHub%20CI/badge.svg)](https://github.com/vim/vim/actions?query=workflow%3A%22GitHub+CI%22)
+[![Appveyor Build status](https://ci.appveyor.com/api/projects/status/o2qht2kjm02sgghk?svg=true)](https://ci.appveyor.com/project/chrisbra/vim)
+[![Cirrus Build Status](https://api.cirrus-ci.com/github/vim/vim.svg)](https://cirrus-ci.com/github/vim/vim)
+[![Coverage Status](https://codecov.io/gh/vim/vim/coverage.svg?branch=master)](https://codecov.io/gh/vim/vim?branch=master)
+[![Coverity Scan](https://scan.coverity.com/projects/241/badge.svg)](https://scan.coverity.com/projects/vim)
+[![Debian CI](https://badges.debian.net/badges/debian/testing/vim/version.svg)](https://buildd.debian.org/vim)
+[![Packages](https://repology.org/badge/tiny-repos/vim.svg)](https://repology.org/metapackage/vim)
+[![Fossies codespell report](https://fossies.org/linux/test/vim-master.tar.gz/codespell.svg)](https://fossies.org/linux/test/vim-master.tar.gz/codespell.html)
+
+If you find a bug or want to discuss the best way to add a new feature, please
+[open an issue](https://github.com/vim/vim/issues/new/choose).
+If you have a question or want to discuss the best way to do something with
+Vim, you can use [StackExchange](https://vi.stackexchange.com/)
+or one of the [Maillists](https://www.vim.org/community.php).
+
+## What is Vim?
+
+Vim is a greatly improved version of the good old UNIX editor
+[Vi](https://en.wikipedia.org/wiki/Vi_(text_editor)).  Many new
+features have been added: multi-level undo, syntax highlighting, command line
+history, on-line help, spell checking, filename completion, block operations,
+script language, etc.  There is also a Graphical User Interface (GUI)
+available.  Still, Vi compatibility is maintained, those who have Vi "in the
+fingers" will feel at home.
+See [`runtime/doc/vi_diff.txt`](runtime/doc/vi_diff.txt) for differences with
+Vi.
+
+This editor is very useful for editing programs and other plain text files.
+All commands are given with normal keyboard characters, so those who can type
+with ten fingers can work very fast.  Additionally, function keys can be
+mapped to commands by the user, and the mouse can be used.
+
+Vim runs under MS-Windows (7, 8, 10, 11), macOS, Haiku, VMS and almost all
+flavours of UNIX.  Porting to other systems should not be very difficult.
+Older versions of Vim run on MS-DOS, MS-Windows 95/98/Me/NT/2000/XP/Vista,
+Amiga DOS, Atari MiNT, BeOS, RISC OS and OS/2.  These are no longer maintained.
+
+For Vim9 script see [README_VIM9](README_VIM9.md).
+
+## Distribution
+
+You can often use your favorite package manager to install Vim.  On Mac and
+Linux a small version of Vim is pre-installed, you still need to install Vim
+if you want more features.
+
+There are separate distributions for Unix, PC, Amiga and some other systems.
+This `README.md` file comes with the runtime archive.  It includes the
+documentation, syntax files and other files that are used at runtime.  To run
+Vim you must get either one of the binary archives or a source archive.
+Which one you need depends on the system you want to run it on and whether you
+want or must compile it yourself.  Check https://www.vim.org/download.php for
+an overview of currently available distributions.
+
+Some popular places to get the latest Vim:
+* Check out the git repository from [GitHub](https://github.com/vim/vim).
+* Get the source code as an [archive](https://github.com/vim/vim/tags).
+* Get a Windows executable from the
+[vim-win32-installer](https://github.com/vim/vim-win32-installer/releases) repository.
+
+## Compiling
+
+If you obtained a binary distribution you don't need to compile Vim.  If you
+obtained a source distribution, all the stuff for compiling Vim is in the
+[`src`](./src/) directory.  See [`src/INSTALL`](./src/INSTALL) for instructions.
+
+## Installation
+
+See one of these files for system-specific instructions.  Either in the
+[READMEdir directory](./READMEdir/) (in the repository) or
+the top directory (if you unpack an archive):
+
+```
+README_ami.txt		Amiga
+README_unix.txt		Unix
+README_dos.txt		MS-DOS and MS-Windows
+README_mac.txt		Macintosh
+README_haiku.txt	Haiku
+README_vms.txt		VMS
+```
+
+There are other `README_*.txt` files, depending on the distribution you used.
+
+## Documentation
+
+The Vim tutor is a one hour training course for beginners.  Often it can be
+started as `vimtutor`.  See `:help tutor` for more information.
+
+The best is to use `:help` in Vim.  If you don't have an executable yet, read
+[`runtime/doc/help.txt`](./runtime/doc/help.txt).
+It contains pointers to the other documentation files.
+The User Manual reads like a book and is recommended to learn to use
+Vim.  See `:help user-manual`.
+
+## Copying
+
+Vim is Charityware.  You can use and copy it as much as you like, but you are
+encouraged to make a donation to help orphans in Uganda.  Please read the file
+[`runtime/doc/uganda.txt`](./runtime/doc/uganda.txt)
+for details (do `:help uganda` inside Vim).
+
+Summary of the license: There are no restrictions on using or distributing an
+unmodified copy of Vim.  Parts of Vim may also be distributed, but the license
+text must always be included.  For modified versions, a few restrictions apply.
+The license is GPL compatible, you may compile Vim with GPL libraries and
+distribute it.
+
+## Sponsoring
+
+Fixing bugs and adding new features takes a lot of time and effort.  To show
+your appreciation for the work and motivate developers to continue working on
+Vim please send a donation.
+
+The money you donated will be mainly used to help children in Uganda.  See
+[`runtime/doc/uganda.txt`](./runtime/doc/uganda.txt).  But at the same time
+donations increase the development team motivation to keep working on Vim!
+
+For the most recent information about sponsoring look on the Vim web site:
+	https://www.vim.org/sponsor/
+
+## Contributing
+
+If you would like to help make Vim better, see the
+[CONTRIBUTING.md](./CONTRIBUTING.md) file.
+
+## Information
+
+If you are on macOS, you can use [MacVim](https://macvim.org).
+
+The latest news about Vim can be found on the Vim home page:
+	https://www.vim.org/
+
+If you have problems, have a look at the Vim documentation or tips:
+	https://www.vim.org/docs.php
+	https://vim.fandom.com/wiki/Vim_Tips_Wiki
+
+If you still have problems or any other questions, use one of the mailing
+lists to discuss them with Vim users and developers:
+	https://www.vim.org/maillist.php
+
+If nothing else works, report bugs directly to the vim-dev mailing list:
+	`<vim-dev@vim.org>`
+
+## Main author
+
+Most of Vim was created by Bram Moolenaar `<Bram@vim.org>`
+[Bram-Moolenaar](https://vimhelp.org/version9.txt.html#Bram-Moolenaar)
+
+Send any other comments, patches, flowers and suggestions to the vim-dev mailing list:
+	`<vim-dev@vim.org>`
+
+This is `README.md` for version 9.1 of Vim: Vi IMproved.

README.txt

@@ -0,0 +1,135 @@
+README.txt for version 9.1 of Vim: Vi IMproved.
+
+
+WHAT IS VIM?
+
+Vim is a greatly improved version of the good old UNIX editor Vi.  Many new
+features have been added: multi-level undo, syntax highlighting, command line
+history, on-line help, spell checking, filename completion, block operations,
+script language, etc.  There is also a Graphical User Interface (GUI) available.
+Still, Vi compatibility is maintained, those who have Vi "in the fingers" will
+feel at home.  See "runtime/doc/vi_diff.txt" for differences with Vi.
+
+This editor is very useful for editing programs and other plain text files.
+All commands are given with normal keyboard characters, so those who can type
+with ten fingers can work very fast.  Additionally, function keys can be
+mapped to commands by the user, and the mouse can be used.
+
+Vim runs under MS-Windows (7, 8, 10, 11), macOS, Haiku, VMS and almost all
+flavours of UNIX.  Porting to other systems should not be very difficult.
+Older versions of Vim run on MS-DOS, MS-Windows 95/98/Me/NT/2000/XP/Vista,
+Amiga DOS, Atari MiNT, BeOS, RISC OS and OS/2.  These are no longer maintained.
+
+
+DISTRIBUTION
+
+You can often use your favorite package manager to install Vim.  On Mac and
+Linux a small version of Vim is pre-installed, you still need to install Vim
+if you want more features.
+
+There are separate distributions for Unix, PC, Amiga and some other systems.
+This README.txt file comes with the runtime archive.  It includes the
+documentation, syntax files and other files that are used at runtime.  To run
+Vim you must get either one of the binary archives or a source archive.
+Which one you need depends on the system you want to run it on and whether you
+want or must compile it yourself.  Check "https://www.vim.org/download.php" for
+an overview of currently available distributions.
+
+Some popular places to get the latest Vim:
+* Check out the git repository from github: https://github.com/vim/vim.
+* Get the source code as an archive: https://github.com/vim/vim/tags.
+* Get a Windows executable from the vim-win32-installer repository:
+  https://github.com/vim/vim-win32-installer/releases.
+
+
+COMPILING
+
+If you obtained a binary distribution you don't need to compile Vim.  If you
+obtained a source distribution, all the stuff for compiling Vim is in the
+"src" directory.  See src/INSTALL for instructions.
+
+
+INSTALLATION
+
+See one of these files for system-specific instructions.  Either in the
+READMEdir directory (in the repository) or the top directory (if you unpack an
+archive):
+
+README_ami.txt		Amiga
+README_unix.txt		Unix
+README_dos.txt		MS-DOS and MS-Windows
+README_mac.txt		Macintosh
+README_haiku.txt	Haiku
+README_vms.txt		VMS
+
+There are other README_*.txt files, depending on the distribution you used.
+
+
+DOCUMENTATION
+
+The Vim tutor is a one hour training course for beginners.  Often it can be
+started as "vimtutor".  See ":help tutor" for more information.
+
+The best is to use ":help" in Vim.  If you don't have an executable yet, read
+"runtime/doc/help.txt".  It contains pointers to the other documentation files.
+The User Manual reads like a book and is recommended to learn to use Vim.  See
+":help user-manual".
+
+
+COPYING
+
+Vim is Charityware.  You can use and copy it as much as you like, but you are
+encouraged to make a donation to help orphans in Uganda.  Please read the file
+"runtime/doc/uganda.txt" for details (do ":help uganda" inside Vim).
+
+Summary of the license: There are no restrictions on using or distributing an
+unmodified copy of Vim.  Parts of Vim may also be distributed, but the license
+text must always be included.  For modified versions, a few restrictions apply.
+The license is GPL compatible, you may compile Vim with GPL libraries and
+distribute it.
+
+
+SPONSORING
+
+Fixing bugs and adding new features takes a lot of time and effort.  To show
+your appreciation for the work and motivate developers to continue working on
+Vim please send a donation.
+
+The money you donated will be mainly used to help children in Uganda.  See
+"runtime/doc/uganda.txt".  But at the same time donations increase the
+development team motivation to keep working on Vim!
+
+For the most recent information about sponsoring look on the Vim web site:
+	https://www.vim.org/sponsor/
+
+
+CONTRIBUTING
+
+If you would like to help make Vim better, see the CONTRIBUTING.md file.
+
+
+INFORMATION
+
+If you are on macOS, you can use MacVim: https://macvim.org
+
+The latest news about Vim can be found on the Vim home page:
+	https://www.vim.org/
+
+If you have problems, have a look at the Vim documentation or tips:
+	https://www.vim.org/docs.php
+	https://vim.fandom.com/wiki/Vim_Tips_Wiki
+
+If you still have problems or any other questions, use one of the mailing lists
+to discuss them with Vim users and developers:
+	https://www.vim.org/maillist.php
+
+If nothing else works, report bugs directly to the vim-dev mailing list:
+	<vim-dev@vim.org>
+
+
+MAIN AUTHOR
+
+Most of Vim was created by Bram Moolenaar <Bram@vim.org>, ":help Bram-Moolenaar"
+
+Send any other comments, patches, flowers and suggestions to the vim-dev
+mailing list: <vim-dev@vim.org>

README_VIM9.md

@@ -0,0 +1,353 @@
+![Vim Logo](https://github.com/vim/vim/blob/master/runtime/vimlogo.gif)
+
+# What is Vim9?
+
+This is a new syntax for Vim script that was introduced with Vim 9.0.
+It intends making Vim script faster and better.
+
+
+# Why Vim9?
+
+## 1. FASTER VIM SCRIPT
+
+The third item on the poll results of 2018, after popup windows and text
+properties, both of which have been implemented, is faster Vim script.
+So how do we do that?
+
+I have been throwing some ideas around, and soon came to the conclusion
+that the current way functions are called and executed, with
+dictionaries for the arguments and local variables, is never going to be
+very fast.  We're lucky if we can make it twice as fast.  The overhead
+of a function call and executing every line is just too high.
+
+So what then?  We can only make something fast by having a new way of
+defining a function, with similar but different properties of the old
+way:
+* Arguments are only available by name, not through the a: dictionary or
+  the a:000 list.
+* Local variables are not available in an l: dictionary.
+* A few more things that slow us down, such as exception handling details.
+
+I Implemented a "proof of concept" and measured the time to run a simple
+for loop with an addition (Justin used this example in his presentation,
+full code is below):
+
+``` vim
+  let sum = 0
+  for i in range(1, 2999999)
+    let sum += i
+  endfor
+```
+
+| how     | time in sec |
+| --------| -------- |
+| Vim old | 5.018541 |
+| Python  | 0.369598 |
+| Lua     | 0.078817 |
+| LuaJit  | 0.004245 |
+| Vim new | 0.073595 |
+
+That looks very promising!  It's just one example, but it shows how much
+we can gain, and also that Vim script can be faster than builtin
+interfaces.
+
+LuaJit is much faster at Lua-only instructions.  In practice the script would
+not do something useless counting, but change the text.  For example,
+reindent all the lines:
+
+``` vim
+  let totallen = 0
+  for i in range(1, 100000)
+    call setline(i, '    ' .. getline(i))
+    let totallen += len(getline(i))
+  endfor
+```
+
+| how     | time in sec |
+| --------| -------- |
+| Vim old | 0.578598 |
+| Python  | 0.152040 |
+| Lua     | 0.164917 |
+| LuaJit  | 0.128400 |
+| Vim new | 0.079692 |
+
+[These times were measured on a different system by Dominique Pelle]
+
+The differences are smaller, but Vim 9 script is clearly the fastest.
+Using LuaJIT is only a little bit faster than plain Lua here, clearly the call
+back to the Vim code is costly.
+
+How does Vim9 script work?  The function is first compiled into a sequence of
+instructions.  Each instruction has one or two parameters and a stack is
+used to store intermediate results.  Local variables are also on the
+stack, space is reserved during compilation.  This is a fairly normal
+way of compilation into an intermediate format, specialized for Vim,
+e.g. each stack item is a typeval_T.  And one of the instructions is
+"execute Ex command", for commands that are not compiled.
+
+
+## 2. DEPRIORITIZE INTERFACES
+
+Attempts have been made to implement functionality with built-in script
+languages such as Python, Perl, Lua, Tcl and Ruby.  This never gained much
+foothold, for various reasons.
+
+Instead of using script language support in Vim:
+* Encourage implementing external tools in any language and communicate
+  with them.  The job and channel support already makes this possible.
+  Really any language can be used, also Java and Go, which are not
+  available built-in.
+* No priority for the built-in language interfaces.  They will have to be kept
+  for backwards compatibility, but many users won't need a Vim build with these
+  interfaces.
+* Improve the Vim script language, it is used to communicate with the external
+  tool and implements the Vim side of the interface.  Also, it can be used when
+  an external tool is undesired.
+
+Altogether this creates a clear situation: Vim with the +eval feature
+will be sufficient for most plugins, while some plugins require
+installing a tool that can be written in any language.  No confusion
+about having Vim but the plugin not working because some specific
+language is missing.  This is a good long term goal.
+
+Rationale: Why is it better to run a tool separately from Vim than using a
+built-in interface and interpreter?  Take for example something that is
+written in Python:
+* The built-in interface uses the embedded python interpreter.  This is less
+  well maintained than the python command.  Building Vim with it requires
+  installing developer packages.  If loaded dynamically there can be a version
+  mismatch.
+* When running the tool externally the standard python command can be used,
+  which is quite often available by default or can be easily installed.
+* The built-in interface has an API that is unique for Vim with Python. This is
+  an extra API to learn.
+* A .py file can be compiled into a .pyc file and execute much faster.
+* Inside Vim multi-threading can cause problems, since the Vim core is single
+  threaded.  In an external tool there are no such problems.
+* The Vim part is written in .vim files, the Python part is in .py files, this
+  is nicely separated.
+* Disadvantage: An interface needs to be made between Vim and Python.
+  JSON is available for this, and it's fairly easy to use.  But it still
+  requires implementing asynchronous communication.
+
+
+## 3. BETTER VIM SCRIPT
+
+To make Vim faster a new way of defining a function needs to be added.
+While we are doing that, since the lines in this function won't be fully
+backwards compatible anyway, we can also make Vim script easier to use.
+In other words: "less weird".  Making it work more like modern
+programming languages will help.  No surprises.
+
+A good example is how in a function the arguments are prefixed with
+"a:". No other language I know does that, so let's drop it.
+
+Taking this one step further is also dropping "s:" for script-local variables;
+everything at the script level is script-local by default.  Since this is not
+backwards compatible it requires a new script style: Vim9 script!
+
+To avoid having more variations, the syntax inside a compiled function is the
+same as in Vim9 script.  Thus you have legacy syntax and Vim9 syntax.
+
+It should be possible to convert code from other languages to Vim
+script.  We can add functionality to make this easier.  This still needs
+to be discussed, but we can consider adding type checking and a simple
+form of classes.  If you look at JavaScript for example, it has gone
+through these stages over time, adding real class support and now
+TypeScript adds type checking.  But we'll have to see how much of that
+we actually want to include in Vim script.  Ideally a conversion tool
+can take Python, JavaScript or TypeScript code and convert it to Vim
+script, with only some things that cannot be converted.
+
+Vim script won't work the same as any specific language, but we can use
+mechanisms that are commonly known, ideally with the same syntax.  One
+thing I have been thinking of is assignments without ":let".  I often
+make that mistake (after writing JavaScript especially).  I think it is
+possible, if we make local variables shadow commands.  That should be OK,
+if you shadow a command you want to use, just rename the variable.
+Using "var" and "const" to declare a variable, like in JavaScript and
+TypeScript, can work:
+
+
+``` vim
+def MyFunction(arg: number): number
+   var local = 1
+   var todo = arg
+   const ADD = 88
+   while todo > 0
+      local += ADD
+      todo -= 1
+   endwhile
+   return local
+enddef
+```
+
+The similarity with JavaScript/TypeScript can also be used for dependencies
+between files.  Vim currently uses the `:source` command, which has several
+disadvantages:
+*   In the sourced script, is not clear what it provides.  By default all
+    functions are global and can be used elsewhere.
+*   In a script that sources other scripts, it is not clear what function comes
+    from what sourced script.  Finding the implementation is a hassle.
+*   Prevention of loading the whole script twice must be manually implemented.
+
+We can use the `:import` and `:export` commands from the JavaScript standard to
+make this much better.  For example, in script "myfunction.vim" define a
+function and export it:
+
+``` vim
+vim9script  " Vim9 script syntax used here
+
+var local = 'local variable is not exported, script-local'
+
+export def MyFunction()  " exported function
+...
+
+def LocalFunction() " not exported, script-local
+...
+```
+
+And in another script import the function:
+
+``` vim
+vim9script  " Vim9 script syntax used here
+
+import MyFunction from 'myfunction.vim'
+```
+
+This looks like JavaScript/TypeScript, thus many users will understand the
+syntax.
+
+These are ideas, this will take time to design, discuss and implement.
+Eventually this will lead to Vim 9!
+
+
+## Code for sum time measurements
+
+Vim was build with -O2.
+
+``` vim
+func VimOld()
+  let sum = 0
+  for i in range(1, 2999999)
+    let sum += i
+  endfor
+  return sum
+endfunc
+
+func Python()
+  py3 << END
+sum = 0
+for i in range(1, 3000000):
+  sum += i
+END
+  return py3eval('sum')
+endfunc
+
+func Lua()
+  lua << END
+    sum = 0
+    for i = 1, 2999999 do
+      sum = sum + i
+    end
+END
+  return luaeval('sum')
+endfunc
+
+def VimNew(): number
+  var sum = 0
+  for i in range(1, 2999999)
+    sum += i
+  endfor
+  return sum
+enddef
+
+let start = reltime()
+echo VimOld()
+echo 'Vim old: ' .. reltimestr(reltime(start))
+
+let start = reltime()
+echo Python()
+echo 'Python: ' .. reltimestr(reltime(start))
+
+let start = reltime()
+echo Lua()
+echo 'Lua: ' .. reltimestr(reltime(start))
+
+let start = reltime()
+echo VimNew()
+echo 'Vim new: ' .. reltimestr(reltime(start))
+```
+
+## Code for indent time measurements
+
+``` vim
+def VimNew(): number
+  var totallen = 0
+  for i in range(1, 100000)
+    setline(i, '    ' .. getline(i))
+    totallen += len(getline(i))
+  endfor
+  return totallen
+enddef
+
+func VimOld()
+  let totallen = 0
+  for i in range(1, 100000)
+    call setline(i, '    ' .. getline(i))
+    let totallen += len(getline(i))
+  endfor
+  return totallen
+endfunc
+
+func Lua()
+  lua << END
+    b = vim.buffer()
+    totallen = 0
+    for i = 1, 100000 do
+      b[i] = "    " .. b[i]
+      totallen = totallen + string.len(b[i])
+    end
+END
+  return luaeval('totallen')
+endfunc
+
+func Python()
+  py3 << END
+cb = vim.current.buffer
+totallen = 0
+for i in range(0, 100000):
+  cb[i] = '    ' + cb[i]
+  totallen += len(cb[i])
+END
+  return py3eval('totallen')
+endfunc
+
+new
+call setline(1, range(100000))
+let start = reltime()
+echo VimOld()
+echo 'Vim old: ' .. reltimestr(reltime(start))
+bwipe!
+
+new
+call setline(1, range(100000))
+let start = reltime()
+echo Python()
+echo 'Python: ' .. reltimestr(reltime(start))
+bwipe!
+
+new
+call setline(1, range(100000))
+let start = reltime()
+echo Lua()
+echo 'Lua: ' .. reltimestr(reltime(start))
+bwipe!
+
+new
+call setline(1, range(100000))
+let start = reltime()
+echo VimNew()
+echo 'Vim new: ' .. reltimestr(reltime(start))
+bwipe!
+```

READMEdir/Contents

@@ -0,0 +1,23 @@
+Vim		Vi IMproved.  A clone of the UNIX text editor Vi.  Very useful
+		for editing programs and other plain ASCII text.  Full Vi
+		compatibility and includes all Ex commands.  Extra features
+		above Vi: Multilevel undo, multiple windows, syntax
+		highlighting, command line history, folding, improved command
+		line editing, command typeahead display, command to display
+		yank buffers, possibility to edit binary files, file name
+		stack, support for Manx QuickFix and other compiler's error
+		messages, shows current file name in window title, on-line
+		help, rectangular cut/paste, etc., etc., etc...
+
+		Version 9.1.  Also runs under UNIX, MS-Windows, Mac, etc.
+		vim91rt.tgz  contains the documentation and syntax files.
+		vim91bin.tgz contains the binaries.
+		vim91src.tgz contains the sources.
+		Author: Bram Moolenaar et al.
+
+
+Xxd		Hex dumper and reader.  Can be used to view files as hex, edit
+		them and write them back.  Can also be used to patch files.
+
+		Version 2023 Oct 25
+		Author: Juergen Weigert

READMEdir/README_ami.txt

@@ -0,0 +1,32 @@
+README_ami.txt for version 9.1 of Vim: Vi IMproved.
+
+This file explains the installation of Vim on Amiga systems.
+See README.txt for general information about Vim.
+
+
+Unpack the distributed files in the place where you want to keep them.  It is
+wise to have a "vim" directory to keep your vimrc file and any other files you
+change.  The distributed files go into a subdirectory.  This way you can
+easily upgrade to a new version.  For example:
+
+  dh0:editors/vim		contains your vimrc and modified files
+  dh0:editors/vim/vim54		contains the Vim version 5.4 distributed files
+  dh0:editors/vim/vim55		contains the Vim version 5.5 distributed files
+
+You would then unpack the archives like this:
+
+  cd dh0:editors
+  tar xf t:vim91bin.tar
+  tar xf t:vim91rt.tar
+
+Set the $VIM environment variable to point to the top directory of your Vim
+files.  For the above example:
+
+  set VIM=dh0:editors/vim
+
+Vim version 5.4 will look for your vimrc file in $VIM, and for the runtime
+files in $VIM/vim54.  See ":help $VIM" for more information.
+
+Make sure the Vim executable is in your search path.  Either copy the Vim
+executable to a directory that is in your search path, or (preferred) modify
+the search path to include the directory where the Vim executable is.

READMEdir/README_amibin.txt

@@ -0,0 +1,12 @@
+README_amibin.txt for version 9.1 of Vim: Vi IMproved.
+
+See "README.txt" for general information about Vim.
+See "README_ami.txt" for installation instructions for the Amiga.
+These files are in the runtime archive (vim91rt.tgz).
+
+
+The Amiga "bin" archive contains the Vim executable for the Amiga.  It was
+compiled with "big" features.
+
+Postscript printing is not included to avoid requiring floating point
+computations.

READMEdir/README_amisrc.txt

@@ -0,0 +1,11 @@
+README_amisrc.txt for version 9.1 of Vim: Vi IMproved.
+
+See "README.txt" for general information about Vim.
+See "README_ami.txt" for installation instructions for the Amiga.
+These files are in the runtime archive (vim91rt.tgz).
+
+
+The Amiga source archive contains the files needed to compile Vim on the
+Amiga.
+
+See "src/INSTALLami.txt" for instructions on how to compile Vim on the Amiga.

READMEdir/README_bindos.txt

@@ -0,0 +1,16 @@
+README_bindos.txt for version 9.1 of Vim: Vi IMproved.
+
+See "README.txt" for general information about Vim.
+See "README_dos.txt" for installation instructions for MS-DOS and MS-Windows.
+These files are in the runtime archive (vim91rt.zip).
+
+
+There are several binary distributions of Vim for the PC.  You would normally
+pick only one of them, but it's also possible to install several.
+These ones are available (the version number may differ):
+	vim91w32.zip	Windows console version
+	gvim91.zip	Windows GUI version
+	gvim91ole.zip	Windows GUI version with OLE
+
+You MUST also get the runtime archive (vim91rt.zip).
+The sources are also available (vim91src.zip).

READMEdir/README_dos.txt

@@ -0,0 +1,125 @@
+README_dos.txt for version 9.1 of Vim: Vi IMproved.
+
+This file explains the installation of Vim on MS-Windows systems.
+See "README.txt" for general information about Vim.
+
+There are two ways to install Vim:
+A. Use the self-installing .exe file.
+B. Unpack .zip files and run the install.exe program.
+
+
+A. Using the self-installing .exe
+---------------------------------
+
+This is mostly self-explaining.  Just follow the prompts and make the
+selections.  A few things to watch out for:
+
+- When an existing installation is detected, you are offered to first remove
+  this.  The uninstall program is then started while the install program waits
+  for it to complete.  Sometimes the windows overlap each other, which can be
+  confusing.  Be sure the complete the uninstalling before continuing the
+  installation.  Watch the taskbar for uninstall windows.
+
+- When selecting a directory to install Vim, use the same place where other
+  versions are located.  This makes it easier to find your _vimrc file.  For
+  example "C:\Program Files\vim" or "D:\vim".  A name ending in "vim" is
+  preferred.
+
+- After selecting the directory where to install Vim, clicking on "Next" will
+  start the installation.
+
+
+B. Using .zip files
+-------------------
+
+These are the normal steps to install Vim from the .zip archives:
+
+1. Go to the directory where you want to put the Vim files.  Examples:
+	cd C:\
+	cd D:\editors
+   If you already have a "vim" directory, go to the directory in which it is
+   located.  Check the $VIM setting to see where it points to:
+	set VIM
+   For example, if you have
+	C:\vim\vim91
+   do
+	cd C:\
+   Binary and runtime Vim archives are normally unpacked in the same location,
+   on top of each other.
+
+2. Unpack the zip archives.  This will create a new directory "vim\vim91",
+   in which all the distributed Vim files are placed.  Since the directory
+   name includes the version number, it is unlikely that you overwrite
+   existing files.
+   Examples:
+	pkunzip -d gvim91.zip
+	unzip vim91w32.zip
+
+   You need to unpack the runtime archive and at least one of the binary
+   archives.  When using more than one binary version, be careful not to
+   overwrite one version with the other, the names of the executables
+   "vim.exe" and "gvim.exe" are the same.
+
+   After you unpacked the files, you can still move the whole directory tree
+   to another location.  That is where they will stay, the install program
+   won't move or copy the runtime files.
+
+3. Change to the new directory:
+	cd vim\vim91
+   Run the "install.exe" program.  It will ask you a number of questions about
+   how you would like to have your Vim setup.  Among these are:
+   - You can tell it to write a "_vimrc" file with your preferences in the
+     parent directory.
+   - It can also install an "Edit with Vim" entry in the Windows Explorer
+     popup menu.
+   - You can have it create batch files, so that you can run Vim from the
+     console or in a shell.  You can select one of the directories in your
+     $PATH.  If you skip this, you can add Vim to the search path manually:
+     The simplest is to add a line to your autoexec.bat.  Examples:
+	set path=%path%;C:\vim\vim91
+	set path=%path%;D:\editors\vim\vim91
+   - Create entries for Vim on the desktop and in the Start menu.
+
+That's it!
+
+
+Remarks:
+
+- If Vim can't find the runtime files, ":help" won't work and the GUI version
+  won't show a menubar.  Then you need to set the $VIM environment variable to
+  point to the top directory of your Vim files.  Example:
+    set VIM=C:\editors\vim
+  Vim version 9.1 will look for your vimrc file in $VIM, and for the runtime
+  files in $VIM/vim91.  See ":help $VIM" for more information.
+
+- To avoid confusion between distributed files of different versions and your
+  own modified vim scripts, it is recommended to use this directory layout:
+  ("C:\vim" is used here as the root, replace it with the path you use)
+  Your own files:
+	C:\vim\_vimrc			Your personal vimrc.
+	C:\vim\_viminfo			Dynamic info for 'viminfo'.
+	C:\vim\vimfiles\ftplugin\*.vim	Filetype plugins
+	C:\vim\...			Other files you made.
+  Distributed files:
+	C:\vim\vim91\vim.exe		The Vim version 9.1 executable.
+	C:\vim\vim91\doc\*.txt		The version 9.1 documentation files.
+	C:\vim\vim91\bugreport.vim	A Vim version 9.1 script.
+	C:\vim\vim91\...		Other version 9.1 distributed files.
+  In this case the $VIM environment variable would be set like this:
+	set VIM=C:\vim
+  Then $VIMRUNTIME will automatically be set to "$VIM\vim91".  Don't add
+  "vim91" to $VIM, that won't work.
+
+- You can put your Vim executable anywhere else.  If the executable is not
+  with the other Vim files, you should set $VIM. The simplest is to add a line
+  to your autoexec.bat.  Examples:
+	set VIM=c:\vim
+	set VIM=d:\editors\vim
+
+- If you have told the "install.exe" program to add the "Edit with Vim" menu
+  entry, you can remove it by running the "uninstall.exe".  See
+  ":help win32-popup-menu".
+
+For further information, type one of these inside Vim:
+	:help dos
+	:help win32

READMEdir/README_extra.txt

@@ -0,0 +1,38 @@
+README_extra.txt for version 9.1 of Vim: Vi IMproved.
+
+These extra files of Vim are for special purposes.  This README explains what
+the files are for.  For general information about Vim, see the "README.txt"
+file.
+
+
+farsi/*			Files for the Farsi (persian) language.  If you don't
+			know what Farsi is, this is not for you.
+
+src/if_sniff.*		Interface to SNiFF.  If you don't know what SNiFF is,
+			this is not for you.
+
+src/os_amiga.*		Files for the Amiga port.
+
+src/os_msdos.*
+src/os_dos.*		Files for the MS-DOS port.
+
+src/os_mac.*		Files for the Mac port.
+
+src/os_vms*		Files for the VMS port.
+
+src/os_w32*
+src/os_win32.*		Files for the Win32 port.
+
+src/gui_w32.*		Files for the Win32 GUI.
+src/gui_w48.*		Files for the Win32 and Win16 GUI.
+src/Make_mvc.mak	MS Visual C++ makefile for the Win32 GUI.
+
+src/if_ole.*		OLE automation interface, for MS Windows.
+
+src/GvimExt/*		DLL for the "Edit with Vim" context menu entry
+
+nsis/*			NSIS script to build the self-installing MS-Windows exe
+
+runtime/doc/*.man	Preprocessed manual pages.
+
+runtime/macros/file_select.vim	Vim script to browse directories (Unix only).

READMEdir/README_haiku.txt

@@ -0,0 +1,13 @@
+README_haiku.txt for version 9.1 of Vim: Vi IMproved.
+
+This file explains the installation of Vim on Haiku operating system.
+See "README.txt" for general information about Vim.
+
+Preferred (and easy) way to get Vim on Haiku is to use default Haiku
+software repository HaikuPorts. To get Vim:
+
+- Open HaikuDepot application and search for "vim" package, then install,
+- Open a Terminal and type "pkgman install vim", then follow instructions.
+
+If you prefer to install Vim from source, follow the instructions on
+"runtime/doc/os_haiku.txt", "Compiling Vim" section.

READMEdir/README_mac.txt

@@ -0,0 +1,12 @@
+README_mac.txt for version 9.1 of Vim: Vi IMproved.
+
+This file explains the installation of Vim on MacOS systems.
+See "README.txt" for general information about Vim.
+
+To build from source get the files with git from https://github.com/vim/vim.
+The find the instructions in src/INSTALLmac.txt.
+
+Installing Vim using Homebrew:
+1. Install Homebrew from http://brew.sh/
+2. Install the latest Vim with:
+	brew install vim

READMEdir/README_ole.txt

@@ -0,0 +1,17 @@
+README_ole.txt for version 9.1 of Vim: Vi IMproved.
+
+This archive contains gvim.exe with OLE interface.
+This version of gvim.exe can also load a number of interface dynamically (you
+can optionally install the .dll files for each interface).
+It is only for MS-Windows.
+
+Also see the README_bindos.txt, README_dos.txt and README.txt files.
+
+Be careful not to overwrite the OLE gvim.exe with the non-OLE gvim.exe when
+unpacking another binary archive!  Check the output of ":version":
+	Win32s - "MS-Windows 16/32 bit GUI version"
+	 Win32 - "MS-Windows 32 bit GUI version"
+Win32 with OLE - "MS-Windows 32 bit GUI version with OLE support"
+
+For further information, type this inside Vim:
+	:help if_ole

READMEdir/README_os2.txt

@@ -0,0 +1,5 @@
+README_os2.txt for version 9.1 of Vim: Vi IMproved.
+
+This file used to explain the installation of Vim on OS/2 systems.
+However, support for OS/2 has been removed in patch 7.4.1008.
+See "README.txt" for general information about Vim.

READMEdir/README_os390.txt

@@ -0,0 +1,117 @@
+README_os390.txt for version 9.1 of Vim: Vi IMproved.
+
+This readme explains how to build Vim on z/OS.  Formerly called OS/390.
+See "README.txt" for general information about Vim.
+
+Most likely there are not many users out there using Vim on z/OS. So chances
+are good, that some bugs are still undiscovered.
+
+Getting the source to z/OS:
+==========================
+
+First get the source code in one big tar file and ftp it a binary to z/OS. If
+the tar file is initially compressed with gzip (tar.gz) or bzip2 (tar.bz2)
+uncompress it on your PC, as these tools are (most likely) not available on
+the mainframe.
+
+To reduce the size of the tar file you might compress it into a zip file. On
+z/OS Unix you might have the command "jar" from java to uncompress a zip. Use:
+        jar xvf <zip file name>
+
+Unpack the tar file on z/OS with 
+        pax -o from=ISO8859-1,to=IBM-1047 -rf vim.tar
+
+Note: The Vim source contains a few bitmaps etc which will be destroyed by
+this command, but these files are not needed on zOS (at least not for the
+console version).
+
+
+Compiling:
+==========
+
+Vim can be compiled with or without GUI support. For 7.4 only the compilation
+without GUI was tested. Below is a section about compiling with X11 but this
+is from an earlier version of Vim.
+
+Console only:
+-------------
+
+If you build VIM without X11 support, compiling and building is nearly
+straightforward. 
+
+Change to the vim directory and do:
+
+    # Don't use c89!
+    # Allow intermixing of compiler options and files.
+
+    $ export CC=cc
+    $ export _CC_CCMODE=1
+    $./configure --with-features=normal --without-x --enable-gui=no
+    $ cd src
+    $ make
+
+      There may be warnings:
+        - include files not found (libc, sys/param.h, ...)
+        - Redeclaration of ... differs from ...
+        -- just ignore them.
+
+    $ make test
+
+      This will produce lots of garbage on your screen (including error
+      messages). Don't worry.
+
+      If the test stops at one point in vim (might happen in test 11), just
+      press :q!
+
+      Expected test failures:
+        11: If you don't have gzip installed
+        24: test of backslash sequences in regexp are ASCII dependent
+        42: Multibyte is not supported on z/OS
+        55: ASCII<->EBCDIC sorting
+        57: ASCII<->EBCDIC sorting
+        58: Spell checking is not supported with EBCDIC
+        71: Blowfish encryption doesn't work
+
+    $ make install
+
+
+With X11:
+---------
+
+WARNING: This instruction was not tested with Vim 7.4 or later.
+
+There are two ways for building VIM with X11 support. The first way is simple
+and results in a big executable (~13 Mb), the second needs a few additional
+steps and results in a much smaller executable (~4.5 Mb). These examples
+assume you want Motif.
+
+  The easy way:
+    $ export CC=cc
+    $ export _CC_CCMODE=1
+    $ ./configure --enable-max-features --enable-gui=motif
+    $ cd src
+    $ make
+
+    With this VIM is linked statically with the X11 libraries.
+
+  The smarter way:
+    Make VIM as described above. Then create a file named 'link.sed' with the
+    following content (see src/link.390):
+
+	s/-lXext  *//g
+	s/-lXmu  *//g
+	s/-lXm	*/\/usr\/lib\/Xm.x /g
+	s/-lX11  */\/usr\/lib\/X11.x /g
+	s/-lXt	*//g
+	s/-lSM	*/\/usr\/lib\/SM.x /g
+	s/-lICE  */\/usr\/lib\/ICE.x /g
+
+    Then do:
+    $ rm vim
+    $ make
+
+    Now Vim is linked with the X11-DLLs.
+
+    See the Makefile and the file link.sh on how link.sed is used.
+
+

READMEdir/README_src.txt

@@ -0,0 +1,8 @@
+README_src.txt for version 9.1 of Vim: Vi IMproved.
+
+The source archive contains the files needed to compile Vim on Unix systems.
+It is packed for Unix systems (NL line separator).
+
+For more information, see the README.txt file that comes with the runtime
+archive (vim-9.1-rt.tar.gz).  To be able to run Vim you MUST get the runtime
+archive too!

READMEdir/README_srcdos.txt

@@ -0,0 +1,11 @@
+README_srcdos.txt for version 9.1 of Vim: Vi IMproved.
+
+See "README.txt" for general information about Vim.
+See "README_dos.txt" for installation instructions for MS-Windows.
+These files are in the runtime archive (vim91rt.zip).
+
+
+The DOS source archive contains the files needed to compile Vim on MS-Windows.
+It is packed for MS-Windows systems, with CR-LF.
+
+See "src/INSTALLpc.txt" for instructions on how to compile Vim on the PC.

READMEdir/README_unix.txt

@@ -0,0 +1,10 @@
+README_unix.txt for version 9.1 of Vim: Vi IMproved.
+
+This file explains the installation of Vim on Unix systems.
+See "README.txt" for general information about Vim.
+
+
+When you use the source distribution, "make install" is used to install Vim.
+See the "INSTALL" file in the "src" directory.
+
+If you use a compiled package, follow the instructions for the package.

READMEdir/README_vimlogo.txt

@@ -0,0 +1,11 @@
+The Python project that creates `vimlogo.svg` can be found at
+`https://github.com/ShayHill/vimlogo`.  The Vim license applies.
+
+`vimlogo.svg` is an effort to remove errors and inadvertent inconsistencies
+from the original vim logo while maintaining the original design. `vimlogo.svg`
+is based on the `vimlogo.svg` file (previously?) found at
+`https://www.vim.org/logos.php`
+
+As of 2024 Jan 30, `vimlogo.svg` is a separate project from `vimlogo.cdr`,
+`vimlogo.eps`, `vimlogo.gif`, `vimlogo.pdf`, and `vimlogo.xpm`, all of which
+are slightly different from each other.

READMEdir/README_vms.txt

@@ -0,0 +1,52 @@
+README_vms.txt for version 9.1 of Vim: Vi IMproved.
+
+This file explains the installation of Vim on VMS systems.
+See "README.txt" in the runtime archive for information about Vim.
+
+
+Most information can be found in the on-line documentation.  Use ":help vms"
+inside Vim.  Or get the runtime files and read runtime/doc/os_vms.txt to find
+out how to install and configure Vim with runtime files etc.
+
+To compile Vim yourself you need three archives:
+  vim-X.X-rt.tar.gz	runtime files
+  vim-X.X-src.tar.gz	source files
+  vim-X.X-extra.tar.gz	extra source files
+
+Compilation is recommended, in order to make sure that the correct
+libraries are used for your specific system.  Read about compiling in
+src/INSTALLvms.txt.
+
+To use the binary version, you need one of these archives:
+
+  vim-XX-exe-x86-gui.zip	X86_64 GUI/Motif executables
+  vim-XX-exe-x86-term.zip	X86_64 console executables
+  vim-XX-exe-ia64-gui.zip	IA64 GUI/Motif executables
+  vim-XX-exe-ia64-gtk.zip	IA64 GUI/GTK executables
+  vim-XX-exe-ia64-term.zip	IA64 console executables
+  vim-XX-exe-axp-gui.zip	Alpha GUI/Motif executables
+  vim-XX-exe-axp-gtk.zip	Alpha GUI/GTK executables
+  vim-XX-exe-axp-term.zip	Alpha console executables
+  vim-XX-exe-vax-gui.zip	VAX GUI executables
+  vim-XX-exe-vax-term.zip	VAX console executables
+
+and of course
+  vim-XX-runtime.zip		runtime files
+
+The binary archives contain: vim.exe, ctags.exe, xxd.exe files,
+but there are also prepared "deploy ready" archives:
+
+vim-XX-x86.zip			GUI and console executables with runtime and
+				help files for X86_64 systems
+vim-XX-ia64.zip			GUI and console executables with runtime and
+				help files for IA64 systems
+vim-XX-axp.zip			GUI and console executables with runtime and
+				help files for Alpha systems
+vim-XX-vax.zip			GUI and console executables with runtime and
+				help files for VAX systems
+
+GTK builds need LIBGTK library installed.
+
+These executables and up to date patches for OpenVMS system are downloadable
+from http://www.polarhome.com/vim/ or ftp://ftp.polarhome.com/pub/vim/
+

READMEdir/README_w32s.txt

@@ -0,0 +1,6 @@
+README_w32s.txt for version 9.1 of Vim: Vi IMproved.
+
+This file used to explain the installation of Vim on MS-Windows 3.1 and 3.11
+systems.  However, support for MS-Windows 3.1 and 3.11 has been removed in
+patch 7.4.1364.
+See "README.txt" for general information about Vim.

SECURITY.md

@@ -0,0 +1,10 @@
+# Security Policy
+
+## Reporting a vulnerability
+
+If you want to report a security issue, please privately disclose the issue to the vim-security mailing list
+vim-security@googlegroups.com
+
+This is a private list, read only by the maintainers, but anybody can post, after moderation.
+
+**Please don't publicly disclose the issue until it has been addressed by us.**

ci/appveyor.bat

@@ -0,0 +1,131 @@
+@echo off
+:: Batch file for building/testing Vim on AppVeyor
+set target=%1
+set "GETTEXT_PATH=c:\gettext64\bin"
+
+setlocal ENABLEDELAYEDEXPANSION
+cd %APPVEYOR_BUILD_FOLDER%
+
+:: Python3
+set "PYTHON3_VER=311"
+set "PYTHON3_RELEASE=3.11.1"
+set "PYTHON3_URL=https://www.python.org/ftp/python/%PYTHON3_RELEASE%/python-%PYTHON3_RELEASE%-amd64.exe"
+set "PYTHON3_DIR=C:\python%PYTHON3_VER%-x64"
+
+:: Gettext-tools, iconv and libraries
+set "GETTEXT64_URL=https://github.com/mlocati/gettext-iconv-windows/releases/download/v0.21-v1.16/gettext0.21-iconv1.16-shared-64.zip"
+set "GETTEXT64_DIR=c:\gettext64"
+
+set "VSWHERE=%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe"
+
+if exist "%VSWHERE%" (
+  for /f "usebackq delims=" %%i in (
+    `"%VSWHERE%" -products * -latest -property installationPath`
+  ) do (
+    set "VCVARSALL=%%i\VC\Auxiliary\Build\vcvarsall.bat"
+  )
+)
+
+if not exist "%VCVARSALL%" (
+  set "VCVARSALL=%ProgramFiles(x86)%\Microsoft Visual Studio 14.0\VC\vcvarsall.bat"
+)
+call "%VCVARSALL%" x64
+
+goto %target%
+echo Unknown build target.
+exit 1
+
+:: ----------------------------------------------------------------------------
+:install
+@echo on
+if not exist downloads mkdir downloads
+
+:: Python 3
+if not exist %PYTHON3_DIR% (
+  call :downloadfile %PYTHON3_URL% downloads\python3.exe
+  cmd /c start /wait downloads\python3.exe /quiet TargetDir=%PYTHON3_DIR% ^
+      Include_pip=0 Include_tcltk=0 Include_test=0 Include_tools=0 ^
+      AssociateFiles=0 Shortcuts=0 Include_doc=0 Include_launcher=0 ^
+      InstallLauncherAllUsers=0
+)
+:: GETTEXT
+if not exist %GETTEXT64_DIR% (
+  mkdir %GETTEXT64_DIR%
+  call :downloadfile %GETTEXT64_URL% downloads\gettext64.zip
+  cmd /c powershell.exe -NoLogo -NoProfile -Command ^
+    Add-Type -AssemblyName 'System.IO.Compression.FileSystem'; ^
+    [System.IO.Compression.ZipFile]::ExtractToDirectory^('downloads\gettext64.zip', ^
+    '%GETTEXT64_DIR%'^)
+    copy /y %GETTEXT64_DIR%\bin\libintl-8.dll C:\projects\vim\src\ || exit 1
+    copy /y %GETTEXT64_DIR%\bin\libiconv-2.dll C:\projects\vim\src\ || exit 1
+)
+
+@echo off
+goto :eof
+
+:: ----------------------------------------------------------------------------
+:build
+
+cd src
+
+echo "Building MSVC 64bit console Version"
+nmake -f Make_mvc.mak CPU=AMD64 ^
+    OLE=no GUI=no IME=yes ICONV=yes DEBUG=no ^
+    FEATURES=%FEATURE%
+if not exist vim.exe (
+    echo Build failure.
+    exit 1
+)
+
+:: build MSVC huge version with python and channel support
+:: GUI needs to be last, so that testing works
+echo "Building MSVC 64bit GUI Version"
+if "%FEATURE%" == "HUGE" (
+    nmake -f Make_mvc.mak CPU=AMD64 ^
+        OLE=no GUI=yes IME=yes ICONV=yes DEBUG=no POSTSCRIPT=yes ^
+        PYTHON_VER=27 DYNAMIC_PYTHON=yes PYTHON=C:\Python27-x64 ^
+        PYTHON3_VER=%PYTHON3_VER% DYNAMIC_PYTHON3=yes PYTHON3=%PYTHON3_DIR% ^
+        FEATURES=%FEATURE%
+) ELSE (
+    nmake -f Make_mvc.mak CPU=AMD64 ^
+        OLE=no GUI=yes IME=yes ICONV=yes DEBUG=no ^
+        FEATURES=%FEATURE%
+)
+if not exist gvim.exe (
+    echo Build failure.
+    exit 1
+)
+.\gvim -u NONE -c "redir @a | ver |0put a | wq" ver_msvc.txt || exit 1
+
+echo "version output MSVC console"
+.\vim --version || exit 1
+echo "version output MSVC GUI"
+type ver_msvc.txt || exit 1
+
+goto :eof
+
+:: ----------------------------------------------------------------------------
+:test
+@echo on
+cd src/testdir
+:: Testing with MSVC gvim
+path %PYTHON3_DIR%;%GETTEXT_PATH%;%PATH%
+nmake -f Make_mvc.mak VIMPROG=..\gvim
+nmake -f Make_mvc.mak clean
+:: Testing with MSVC console version
+nmake -f Make_mvc.mak VIMPROG=..\vim
+
+@echo off
+goto :eof
+
+:: ----------------------------------------------------------------------------
+:downloadfile
+:: call :downloadfile <URL> <localfile>
+if not exist %2 (
+	curl -f -L %1 -o %2
+)
+if ERRORLEVEL 1 (
+	rem Retry once.
+	curl -f -L %1 -o %2 || exit 1
+)
+@goto :eof

ci/config.mk.clang-12.sed

@@ -0,0 +1,3 @@
+# Clang 12 (or Apple clang 13) and later makes a warning '-Wcompound-token-split-by-macro' enable by default.
+/^PERL_CFLAGS_EXTRA[[:blank:]]*=/s/$/ -Wno-error=compound-token-split-by-macro -Wno-compound-token-split-by-macro/
+/^RUBY_CFLAGS_EXTRA[[:blank:]]*=/s/$/ -Wno-error=compound-token-split-by-macro/

ci/config.mk.clang.sed

@@ -0,0 +1,2 @@
+/^CFLAGS[[:blank:]]*=/s/$/ -Wno-error=missing-field-initializers/
+/^RUBY_CFLAGS_EXTRA[[:blank:]]*=/s/$/ -Wno-error=unknown-attributes -Wno-error=ignored-attributes/

ci/config.mk.gcc.sed

@@ -0,0 +1 @@
+/^CFLAGS[[:blank:]]*=/s/$/ -Wno-error=maybe-uninitialized/

ci/config.mk.sed

@@ -0,0 +1,3 @@
+/^CFLAGS[[:blank:]]*=/s/$/ -Wall -Wextra -Wshadow -Wstrict-prototypes -Wmissing-prototypes -Werror -Wno-deprecated-declarations/
+/^PERL_CFLAGS_EXTRA[[:blank:]]*=/s/$/ -Wno-error=unused-function -Wno-shadow/
+/^RUBY_CFLAGS_EXTRA[[:blank:]]*=/s/$/ -Wno-error=unused-parameter -Wno-strict-prototypes/

ci/hlgroups.ignore

@@ -0,0 +1,66 @@
+ColorColumn
+ComplMatchIns
+Conceal
+Cursor
+CursorColumn
+CursorIM
+CursorLine
+CursorLineNr
+debugBreakpoint
+debugPC
+DiffAdd
+DiffChange
+DiffDelete
+DiffText
+Directory
+ErrorMsg
+FoldColumn
+Folded
+Ignore
+IncSearch
+lCursor
+LineNr
+LineNrAbove
+LineNrBelow
+MatchParen
+Menu
+ModeMsg
+MoreMsg
+MsgArea
+NonText
+Normal
+Pmenu
+PmenuSbar
+PmenuSel
+PmenuThumb
+Question
+Scrollbar
+Search
+SignColumn
+SpecialKey
+SpellBad
+SpellCap
+SpellLocal
+SpellRare
+StatusLine
+StatusLineNC
+StatusLineTerm
+StatusLineTermNC
+TabLine
+TabLineFill
+TabLineSel
+Terminal
+Title
+TOhtmlProgress
+TOhtml-progress-color
+ToolbarButton
+ToolbarLine
+Tooltip
+User1
+User1..9
+User9
+VertSplit
+Visual
+VisualNOS
+WarningMsg
+WildMenu

ci/hlgroups.make

@@ -0,0 +1,18 @@
+# vim: ft=make
+SHELL = /bin/bash
+
+# Default target to actually run the comparison:
+.PHONY: check
+.INTERMEDIATE: hlgroups deflinks hlgroups.stripped
+
+check: hlgroups.stripped deflinks
+	diff hlgroups.stripped deflinks
+
+hlgroups:
+	grep '\*hl-' ../runtime/doc/*txt | sed -E -e 's/.*:<?\s*//' -e 's/hl-//g' -e 's/\*//g' -e 's/ /\n/g' | sort > hlgroups
+
+deflinks: ../src/highlight.c
+	grep '"default link'  $< | sed 's/.*default link\s*\(.*\)\s.*/\1/' | sort > deflinks
+
+hlgroups.stripped: hlgroups.ignore hlgroups
+	grep -v -x -F -f hlgroups.ignore hlgroups > hlgroups.stripped

ci/if_ver-1.vim

@@ -0,0 +1,25 @@
+" Print all interface versions for Ubuntu. Part 1.
+
+if 1
+  execute 'source' expand('<sfile>:h') .. '/if_ver-cmd.vim'
+
+  echo "*** Interface versions ***\n"
+
+  echo 'Lua:'
+  PrintVer lua print(vim.lua_version, jit and "(LuaJIT)" or "")
+
+  echo 'MzScheme:'
+  PrintVer mzscheme (display (version))
+
+  echo 'Perl:'
+  PrintVer perl print $^V
+
+  echo 'Ruby:'
+  PrintVer ruby print RUBY_VERSION
+
+  echo 'Tcl:'
+  PrintVer tcl puts [info patchlevel]
+
+  echo 'Python 2:'
+  PrintVer python print sys.version
+endif

ci/if_ver-2.vim

@@ -0,0 +1,8 @@
+" Print py3 interface versions for Ubuntu. Part 2.
+
+if 1
+  execute 'source' expand('<sfile>:h') .. '/if_ver-cmd.vim'
+
+  echo 'Python 3:'
+  PrintVer python3 print(sys.version)
+endif

ci/if_ver-cmd.vim

@@ -0,0 +1,12 @@
+" Provide 'PrintVer' command to print the interface versions.
+
+func s:print_ver(lang, ...)
+  if has(a:lang)
+    exec a:lang join(a:000)
+  else
+    echo 'N/A'
+  endif
+  echo ''
+endfunc
+
+command -nargs=+ PrintVer call <SID>print_ver(<f-args>)

ci/remove_snap.sh

@@ -0,0 +1,13 @@
+#!/usr/bin/env sh
+pushd /etc/apt/preferences.d/
+cat > nosnap.pref <<EOF
+# To prevent repository packages from triggering the installation of snap,
+# this file forbids snapd from being installed by APT.
+
+Package: snapd
+Pin: release a=*
+Pin-Priority: -10
+EOF
+popd
+snap remove --purge $(snap list | awk '!/^Name|^core/ {print $1}')
+apt-get purge -y snapd

ci/setup-xvfb.sh

@@ -0,0 +1,17 @@
+#!/bin/bash
+set -e
+
+apt-get install -y xvfb
+
+cat <<EOT >/etc/systemd/system/xvfb.service
+[Unit]
+Description=X Virtual Frame Buffer Service
+After=network.target
+[Service]
+ExecStart=/usr/bin/Xvfb :99 -screen 0 1024x768x24
+[Install]
+WantedBy=multi-user.target
+EOT
+
+systemctl enable xvfb.service
+systemctl start xvfb.service

ci/unlisted.make

@@ -0,0 +1,49 @@
+# vim: ft=make
+SHELL = /bin/bash
+
+# List all files that are tracked in git but not listed in Filelist.
+# Exit code is 2 ("Make encountered an error") if any such files exist.
+
+# Filelist is a Makefile that defines many variables, so we use Make itself to
+# query which variables it defines, then expand them all by wrapping each name
+# in $(...), importing Filelist and using $(eval).
+
+include Filelist
+$(eval all_patterns := $(shell \
+	make -f Filelist --question --print-data-base --no-builtin-rules \
+		--no-builtin-variables 2>/dev/null \
+	| sed -nre \
+		'/^# makefile .from \x27Filelist\x27,/ { \
+			n; \
+			s/ = .*//; \
+			T; \
+			s/.*/$$(\0)/; \
+			p; \
+		}'))
+
+# In Makefile's `prepare` target, all the IN_README_DIR files are moved from
+# READMEdir to the root, so add those files in their Git-tracked location:
+all_patterns := $(all_patterns) \
+	$(foreach readme, $(IN_README_DIR), READMEdir/$(readme))
+
+# The result 'all_patterns' is a list of patterns (globs), which we expand with
+# wildcard to get actual filenames.  Note this means Filelist can list a file
+# that does not exist, and it will be omitted at this step.
+listed_files := $(wildcard $(all_patterns))
+
+# Default target to actually run the comparison:
+.PHONY: check
+check:
+	@# There are too many files to list on the command line, so we write
+	@# that to a temporary file, one per line.
+	$(file > Filelist-listed-files)
+	$(foreach filename, $(listed_files),\
+		$(file >> Filelist-listed-files,$(filename)))
+	@# Compare the sorted lists.  Delete that temporary file on both
+	@# success and failure, but exit with diff's exit code.
+	diff -u0 --label files-in-git <(git ls-files | sort) \
+		--label Filelist <(sort --unique Filelist-listed-files); \
+	RV=$$?; \
+	rm Filelist-listed-files; \
+	(($$RV != 0)) && echo "Add files to the right variable in Filelist."; \
+	exit $$RV

configure

@@ -0,0 +1,6 @@
+#! /bin/sh
+
+# This is just a stub for the Unix configure script, to provide support for
+# doing "./configure" in the top Vim directory.
+
+cd "${SRCDIR:-src}" && exec ./configure "$@"

lang/LICENSE.it.txt

@@ -0,0 +1,99 @@
+LICENZA VIM
+
+Nota: Agli effetti legali ha valore non la seguente traduzione italiana, ma
+l'originale inglese su cui è basata. È alla versione inglese che si fa
+riferimento qui sotto quando si parla di "questa licenza" (NdT).
+
+I)  Non ci sono restrizioni alla distribuzione di copie non modificate di Vim,
+    alla condizione che esse includano il testo di questa licenza.  Si possono
+    anche distribuire parti non modificate di Vim, sempre senza restrizioni,
+    alla condizione che esse includano il testo di questa licenza.  È anche
+    consentito includere programmi eseguibili da voi preparati a partire dai
+    file sorgenti Vim non modificati, più i vostri esempi di utilizzo e i
+    vostri script Vim.
+
+II) È consentito distribuire una versione modificata (o estesa) di Vim,
+    contenente programmi eseguibile e/o codice sorgente, quando siano
+    rispettare le seguenti quattro condizioni:
+    1) Il testo di questa licenza deve essere incluso senza modifiche.
+    2) La versione modificata di Vim dev'essere distribuita in una della
+       seguenti cinque maniere:
+       a) Se voi personalmente modificate a Vim, dovete descrivere
+          chiaramente nella distribuzione come è possibile mettersi in
+          contatto con voi.  Quando il manutentore vi chiede (in qualsiasi
+          forma) una copia della versione modificata di Vim da voi
+          distribuita, dovete rendere disponibili le vostre modifiche,
+          compreso il codice sorgente, al manutentore, senza alcuna spesa.
+          Il manutentore si riserva il diritto di includere le vostre
+          modifiche nella versione ufficiale di Vim.  Quel che il manutentore
+          potrà fare con le vostre modifiche e sotto quale licenza esse
+          verranno distribuite può essere oggetto di negoziazione.  Se non c'è
+          stata alcuna negoziazione, questa licenza, o una versione successiva
+          della stessa è anche applicabile alle vostre modifiche.
+          I manutentori correnti sono elencati qui:
+          https://github.com/orgs/vim/people.
+          Se dovessero cambiare, ne sarò dato annuncio nei luoghi appropriati
+          (verosimilmente vim.sf.net, www.vim.org e/o comp.editors).  Quando
+          sia completamente impossibile contattare il manutentore, l'obbligo
+          di spedirgli le vostre modifiche viene meno.  Una volta che il
+          manutentore abbia confermato di aver ricevuto le vostre modifiche,
+          non sarà necessario spedirle ulteriormente.
+       b) Se avete ricevuto un Vim modificato che era stato distribuito come
+          descritto al punto a) potete ulteriormente distribuirlo senza
+          modificarlo, come menzionato al punto I).  Se fate ulteriori
+          modifiche, il testo al punto a) si applica a queste modifiche.
+       c) Includete tutte le modifiche, compreso il codice sorgente, con ogni
+          copia del Vim modificato da voi distribuito.  Questo può essere
+          fatto sotto forma dell'output di un comando "diff", che contenga
+          anche il contesto [ossia anche le linee non modificate di sorgente
+          che vengono prima o dopo le modifiche - NdT].  Potete scegliere
+          quale licenza volete utilizzare per il nuovo codice sorgente che voi
+          aggiungere.  Le modifiche e la relativa licenza non devono impedire
+          a terze parti di apportare le loro proprie modifiche a Vim.
+       d) Quando avete un Vim modificato che comprende modifiche quali quelle
+          menzionate al punto c), potete distribuirlo senza il codice sorgente
+          che descrive le modifiche, se le seguenti tre condizioni sono
+          soddisfatte:
+          - La licenza applicabile alle modifiche vi consente di distribuire
+            le modifiche al manutentore Vim senza alcun costo o restrizione, e
+            permette al manutentore Vim di includere le modifiche nella
+            versione ufficiale di Vim senza alcun costo o restrizione.
+          - Le modifiche da voi fatte sono conservate per almeno tre anni,
+            dopo che avrete distribuito per l'ultima volta il Vim modificato
+            corrispondente alle modifiche stesse.  Quando il manutentore o
+            qualcuno a cui voi avete distribuito il Vim modificato vi chiede
+            (in qualsiasi forma) le modifiche, entro il periodo qui indicato,
+            dovete fargliele avere.
+          - Dovete descrivere chiaramente nella distribuzione come è possibile
+            mettersi in contatto con voi.  Questa informazione di contatto
+            deve rimanere valida per almeno tre anni dopo l'ultima data di
+            distribuzione della corrispondente modifica di Vim, oppure il più
+            a lungo possibile.
+       e) Quando al GNU General Public License (GPL) si applica alle
+          modifiche, potete distribuire il Vim modificato sotto la versione 2
+          della licenza GNU GPL versione 2 o una qualsiasi versione successiva
+          della stessa licenza.
+    3) Un messaggio deve essere aggiunto, almeno all'output del comando
+       ":version" e nella schermata introduttiva, in modo che l'utilizzatore
+       del Vim modificato sia in grado di comprendere cosa è stato modificato.
+       Quando si distribuisca come menzionato al punto 2)e) l'aggiunta del
+       messaggio è richiesta solo se ciò non conduca a conflitti con la
+       licenza usata per le modifiche.
+    4) L'informazione di contatto, richiesta ai punto 2)a) e 2)d) non deve
+       essere rimossa o modificata, tranne che per il fatto che la persona
+       stessa può apportare delle correzioni.
+
+III) Se distribuite una versione modificata di Vim, siete incoraggiati a
+     utilizzare la licenza Vim per le vostre modifiche, e a mettere le
+     modifiche a disposizione del manutentore, compreso il codice sorgente.
+     Il modo preferito in cui fare questo è tramite e-mail o caricando
+     i file su un server ed inviandone l'indirizzo (URL) tramite e-mail.
+     Se il numero di modifiche è piccolo (per esempio, una modifica a un
+     Makefile) inviare tramite email l'output del comando diff con contesto
+     può essere sufficiente.  L'indirizzo e-mail da utilizzare è
+     <maintainer@vim.org>
+
+IV)  Non è consentito rimuovere questa licenza dalla distribuzione dei codici
+     sorgente Vim, anche in parte, o da una versione di Vim modificata.
+     Potete usare questa licenza per precedenti versioni di Vim, invece della
+     licenza con cui esse sono state distribuite, a vostra scelta.

lang/LICENSE.pt_br.txt

@@ -0,0 +1,81 @@
+LICENÇA DO VIM
+
+I) Não há restrições para distribuir cópias não modificadas do Vim, exceto
+   que elas devem incluir este texto de licença. Você também pode distribuir
+   partes não modificadas do Vim, igualmente irrestritas, exceto que elas
+   devem incluir este texto de licença. Você também tem permissão para incluir
+   executáveis que você fez a partir das fontes não modificadas do Vim, além 
+   de seus próprios exemplos de uso e scripts do Vim.
+
+II) É permitido distribuir uma versão modificada (ou estendida) do Vim,
+    incluindo executáveis e/ou código-fonte, quando as quatro
+    condições a seguir forem atendidas:
+    1) Este texto de licença deve ser incluído sem modificações.
+    2) O Vim modificado deve ser distribuído de uma das cinco formas a seguir:
+       a) Se você fizer alterações no Vim, deverá descrever claramente na
+          distribuição como entrar em contato com você. Quando o mantenedor
+          solicitar a você (de qualquer forma) uma cópia do Vim modificado que
+          você distribuiu, você deverá disponibilizar suas alterações,
+          incluindo o código-fonte, ao mantenedor sem taxa. O mantenedor
+          reserva o direito de incluir suas alterações na versão oficial
+          do Vim. O que o mantenedor fará com suas alterações e sob qual
+          licença elas serão distribuídas é negociável. Se não houve negociação
+          então esta licença, ou uma versão posterior, também se aplica às suas
+          alterações. Os mantenedores atuais estão listados aqui:
+          https://github.com/orgs/vim/people. Se isso mudar, será anunciado em
+          lugares apropriados (provavelmente vim.sf.net, www.vim.org e/ou
+          comp.editors). Quando for completamente impossível contatar o
+          mantenedor, a obrigação de enviar a ele suas alterações cessa.
+          Uma vez que o mantenedor tenha confirmado que ele recebeu suas
+          alterações, elas não precisarão ser enviadas novamente.
+       b) Se você recebeu um Vim modificado que foi distribuído como
+          mencionado em a), você tem permissão para distribuí-lo sem
+          modificações, como mencionado em I). Se você fizer alterações
+          adicionais, o texto em a) se aplica a essas alterações.
+       c) Forneça todas as alterações, incluindo o código-fonte, com cada cópia
+          do Vim modificado que você distribuir. Isso pode ser feito na forma
+          de um diff de contexto. Você pode escolher qual licença usar para o
+          novo código que você adicionar. As alterações e sua licença não devem
+          restringir outros de fazer suas próprias alterações na versão oficial
+          do Vim.
+       d) Quando você tem um Vim modificado que inclui alterações conforme
+          mencionado em c), você pode distribuí-lo sem o código-fonte para as
+          alterações se as três condições a seguir forem atendidas:
+          - A licença que se aplica às alterações permite que você distribua
+            as alterações para o mantenedor do Vim sem taxa ou restrição, e
+            permite que o mantenedor do Vim inclua as alterações na
+            versão oficial do Vim sem taxa ou restrição.
+          - Você mantém as alterações por pelo menos três anos após a última
+            distribuição do Vim modificado correspondente. Quando o mantenedor
+            ou alguém para quem você distribuiu o Vim modificado solicitar a
+            você (de qualquer forma) as alterações dentro deste período, você
+            deve disponibilizá-las a ele.
+          - Você descreve claramente na distribuição como entrar em contato
+            com você. Estas informações de contato devem permanecer válidas por
+            pelo menos três anos após a última distribuição do Vim modificado
+            correspondente, ou pelo maior tempo possível.
+       e) Quando a Licença Pública Geral GNU (GPL) se aplica às alterações,
+          você pode distribuir o Vim modificado sob a GNU GPL versão 2 ou
+          qualquer versão posterior.
+    3) Uma mensagem deve ser adicionada, no mínimo na saída do comando
+       ":version" e na tela de introdução, de modo que o usuário do Vim
+       modificado seja capaz de ver que ele foi modificado. Ao distribuir
+       conforme mencionado em 2)e), só é necessário adicionar a mensagem
+       na medida em que isso não entre em conflito com a licença usada para
+       as alterações.
+    4) As informações de contato conforme exigido em 2)a) e 2)d) não devem ser
+       removidas ou alteradas, exceto que a própria pessoa pode fazer
+       correções.
+
+III) Se você distribuir uma versão modificada do Vim, encorajamos que use
+     a licença do Vim para suas alterações e disponibilizá-las ao
+     mantenedor, incluindo o código-fonte. A maneira preferida de fazer isso é
+     por e-mail ou enviando os arquivos para um servidor e enviando a URL por
+     e-mail. Se o número de alterações for pequeno (por exemplo, um Makefile
+     modificado), enviar um diff de contexto por e-mail será suficiente.
+     O endereço de e-mail a ser usado é <maintainer@vim.org>
+
+IV) Não é permitido remover esta licença da distribuição das fontes do Vim,
+    partes dela ou de uma versão modificada. Você pode usar esta licença
+    para versões anteriores do Vim em vez da licença com a qual elas vieram,
+    a seu critério.

lang/LICENSE.ru.txt

@@ -0,0 +1,109 @@
+ЛИЦЕНЗИЯ VIM
+
+I)  Неизменённые копии программы Vim могут распространяться без ограничения
+    при условии включения данного текста лицензии. Распространение
+    неизменённых копий отдельных частей программы Vim также возможно
+    при соблюдении условия о включении данного текста лицензии. Подобным
+    образом разрешается добавлять исполняемые файлы, скомпилированные
+    из неизменённого исходного кода программы Vim, а также собственные
+    примеры использования и командные файлы редактора Vim.
+
+II) Изменённую (или дополненную) версию программы Vim, включающую
+    исполняемые файлы и/или исходный код, допускается распространять
+    при соблюдении следующих четырёх условий:
+    1) Текст настоящей лицензии должен включаться в состав распространяемой
+    версии программы Vim без изменений.
+    2) Изменённая версия программы Vim должна распространяться одним
+    из следующих пяти способов:
+       a) При внесении изменений в программу Vim, в дистрибутиве должны
+	  быть явно указаны контактные данные лица, внёсшего эти изменения.
+	  Ответственному разработчику по его запросу (в любой форме) должна
+	  быть безвозмездно предоставлена копия распространяемой изменённой
+	  версии программы Vim, включая её исходный код. Ответственный
+	  разработчик оставляет за собой право включать сделанные изменения
+	  в официальную версию программы Vim. Конкретные действия
+	  ответственного разработчика, относительно переданных изменений,
+	  а также лицензионные условия, на основании которых будет
+	  осуществляться их распространение, могут быть дополнительно
+	  согласованы. Если согласование не проводилось, сделанные изменения
+	  будут распространяться на условиях настоящей лицензии или более
+	  поздней её версии. Лица, в данное время являющиеся ответственными
+	  за разработку, указаны в перечне, размещённом по адресу:
+	  https://github.com/orgs/vim/people. В случае изменения этой
+	  информации, актуальные данные будут опубликованы на
+	  соответствующих ресурсах (вероятнее всего по интернет‐адресам
+	  vim.sf.net, www.vim.org и/или comp.editors). В случае полной
+	  невозможности установить контакт с ответственным разработчиком,
+	  обязательства по отправке изменений утрачивают силу. После
+	  передачи подтверждения о получении изменений от ответственного
+	  разработчика, необходимость в повторной отправке копии изменённой
+	  программы Vim неприменима.
+       b) Если лицом получена изменённая версия программа Vim,
+	  распространяющаяся на условиях, указанных в ч. II) п. 2) пп. а)
+	  допускается дальнейшее её распространение этим лицом без внесения
+	  изменений и согласно ч. I) настоящей лицензии. В случае внесения
+	  дополнительных изменений, на эти изменения будут распространяться
+	  условия, указанные в ч. II) п. 2) пп. a).
+       c) Каждая копия распространяемой изменённой версии программы Vim
+	  должна включать информацию обо всех произведённых изменениях,
+	  включая исходный код. Эта информация может быть представлена
+	  в виде построчного сравнения файлов. Выбор лицензии, по условиям
+	  которой будет распространяться добавленный код, остаётся
+	  за автором этих изменений. Изменения и лицензия на эти изменения
+	  не должны запрещать другим лицам внесение своих собственных
+	  изменений в официальную версию программы Vim.
+       d) Изменённая версия программы Vim, содержащая изменения в
+	  соответствии с ч. II) п. 2 пп. c), может распространяться без
+	  исходного кода для этих изменений, при соблюдении следующих трёх
+	  условий:
+	  - Лицензия, применяемая к внесённым изменениям, предоставляет
+	    ответственному разработчику программы Vim возможность
+	    безвозмездного и неограниченного распространения этих изменений,
+	    а также право на безвозмездное и неограниченное включение этих
+	    изменений в официальную версию программы Vim.
+	  - Изменения должны сохраняться не менее трёх лет со времени
+	    распространения соответствующей изменённой версии программы Vim.
+	    В течение этого периода по запросу ответственного разработчика
+	    или другого пользователя изменённой версии программы Vim
+	    (в любой форме) необходимо предоставить исходный код данных
+	    изменений.
+	  - В дистрибутиве изменённой версии программы Vim должны быть явно
+	    указаны контактные данные лица, внёсшего эти изменения.
+	    Контактные данные должны сохранять актуальность в течение
+	    не менее трёх лет со времени последнего распространения
+	    соответствующей изменённой версии программы Vim или как можно
+	    дольше.
+       e) Если к изменениям, внесённым в программу Vim, применимы условия
+	  лицензии GNU General Public License (GNU GPL), допускается
+	  распространение изменённой версия программы Vim на условиях
+	  лицензии GNU GPL версии 2 или любой более поздней версии этой
+	  лицензии.
+    3) Необходимо добавить соответствующую информацию, которая должна быть
+       выведена в результате выполнения команды ":version" в программе Vim,
+       а также на экране приветствия программы Vim, чтобы пользователь
+       изменённой версии программы Vim имел возможность определить,
+       что он пользуется изменённой версией. При распространении
+       на условиях, указанных в ч. II) п. 2) пп. e) такую информацию
+       требуется добавлять только в том случае, когда она не противоречит
+       лицензии, распространяющейся на эти изменения.
+    4) Контактная информация, которая указывается по требованию ч. II) п. 2)
+       пп. a) и ч. II) п. 2) пп. d) не должна удаляться или изменяться никем
+       другим, кроме лица, указавшего данную контактную информацию.
+
+III) При распространении изменённой версии программы Vim рекомендуется
+     пользоваться лицензией Vim для произведённых изменений и обеспечить
+     доступ к этим изменениям ответственного разработчика, включая исходный
+     код изменений. Предпочтительным способом предоставления доступа
+     к произведённым изменениям является отправка этих изменений через
+     электронную почту или размещение файлов на сервер с отправкой
+     URL-адреса по электронной почте. Если количество изменений
+     незначительно (например, изменения в файле Makefile), достаточно будет
+     отправить через электронную почту файл построчного сравнения. Изменения
+     или URL-адреса должны быть направлены на адрес электронной почты
+     maintainer@vim.org
+
+IV)  Не допускается удаление настоящей лицензия из дистрибутива исходного
+     кода программы Vim, его отдельных частей или изменённой версии.
+     Допускается использование настоящей лицензию для предыдущих
+     изменённых выпусков программы Vim, взамен тех лицензий, с которыми
+     они распространялись.

lang/README.it.txt

@@ -0,0 +1,167 @@
+README.txt per la versione 9.1 di Vim: VI Migliorato.
+
+
+COS'È VIM?
+
+Vim è una versione migliorata del classico programma di videoscrittura UNIX
+Vi.  Molte nuove funzionalità sono state aggiunte: la possibilità di avere
+multipli annullamenti di comando, l'evidenziazione sintattica, una storia dei
+comandi immessi, file di aiuto facilmente consultabili, controlli ortografici,
+completamento di nomi di file, operazioni su blocchi di dati, un linguaggio di
+script, etc.  È anche disponibile una versione grafica (GUI).  Tuttavia è
+possibile lavorare come se si stesse usando il Vi "classico".  Chi avesse Vi
+"sulle dita" si troverà a suo agio.  Vedere il file "runtime/doc/vi_diff.txt"
+[in inglese] per dettagli sulle differenze di Vim rispetto a Vi.
+
+Questo editor è molto utile per modificare programmi e altri file di testo.
+Tutti i comandi sono immessi usando i tasti presenti sulla tastiera, in modo
+che chi è in grado di digitare usando tutte e dieci le dita può lavorare molto
+velocemente.  Inoltre, i tasti funzione possono essere mappati per inserire
+comandi dell'utente, ed è possibile usare il mouse.
+
+Vim è disponibile in ambiente MS-Windows (7, 8, 10, 11), macOS, Haiku, VMS e
+in quasi tutte le varianti di Unix.  L'adattamento a nuovi sistemi operativi
+non dovrebbe essere molto difficile.
+Precedenti versioni di Vim funzionano in ambiente MS-DOS, MS-Windows
+95/98/Me/NT/2000/XP/Vista, Amiga DOS, Atari MiNT, BeOS, RISC OS e OS/2.
+Tali versioni non sono più supportate.
+
+
+DISTRIBUZIONE
+
+Spesso è possibile usare il vostro Gestore applicazioni preferito per
+installare Vim.  Negli ambienti Mac e Linux una versione base di Vim è inclusa
+nel sistema operativo, ma può ancora essere necessario installare Vim se si
+desiderano funzionalità ulteriori.
+
+Ci sono distribuzioni separate di Vim per gli ambienti Unix, PC, Amiga e per
+qualche altro sistema operativo.  Questo file README.txt è contenuto nelle
+directory che contengono i file usati da Vim in fase di esecuzione.  Nelle
+stesse directory sono presente la documentazione, i file usati per
+l'evidenziazione sintattica e altri file usati da Vim in fase di esecuzione.
+Per installare Vim occorre ottenere un archivio che contiene solo i file
+eseguibili, o un archivio che permette di compilare Vim a partire dai file
+sorgente.  Quale alternativa preferire dipende dal sistema su cui si vuole
+usare Vim, e dal preferire (o meno) di compilarlo direttamente a partire dai
+file sorgente.  Consultate "https://www.vim.org/download.php" per una
+panoramica delle distribuzioni correntemente disponibili.
+
+Alcuni siti da cui ottenere l'ultima versione di Vim:
+* Consultare la repository git in github: https://github.com/vim/vim.
+* Procurarsi il codice sorgente come archivio https://github.com/vim/vim/tags.
+* Ottenere un file per installare Vim in ambiente Windows dalla repository
+  vim-win32-installer:
+  https://github.com/vim/vim-win32-installer/releases.
+
+
+COMPILARE VIM
+
+Se si è ottenuta una distribuzione di file eseguibili di Vim non è necessario
+compilarlo.  Se si è ottenuta una distribuzione di file sorgente, tutto ciò
+che serve per compilare Vim è nella directory "src".  Vedere src/INSTALL per
+come procedere.
+
+
+INSTALLAZIONE
+
+Vedere uno dei file elencati più sotto per istruzioni riguardo a uno specifico
+sistema operativo.  Tali file sono (nella repository git) nella directory
+READMEdir oppure nella directory principale se si scompatta un archivio:
+
+README_ami.txt		Amiga
+README_unix.txt		Unix
+README_dos.txt		MS-DOS e MS-Windows
+README_mac.txt		Macintosh
+README_haiku.txt	Haiku
+README_vms.txt		VMS
+
+Esistono altri file README_*.txt, a seconda della distribuzione in uso.
+
+
+DOCUMENTAZIONE
+
+Esiste un corso di introduzione a Vim per principianti, della durata di circa
+un'ora.  Normalmente si può accedervi tramite il comando "vimtutor".  Vedere
+":help tutor" per ulteriori informazioni.
+
+Ma la cosa migliore è usare la documentazione disponibile in una sessione di
+Vim, tramite il comando ":help".  Se ancora non si ha a disposizione Vim, si
+può leggere il file "runtime/doc/help.txt".  Questo file contiene puntatori
+agli altri file che costituiscono la documentazione.
+All'interno della documentazione esiste anche uno User Manual (manuale utente)
+che si legge come un libro ed è raccomandato per imparare a usare Vim.
+Vedere ":help user-manual".  Il manuale utente è stato interamente tradotto in
+italiano, ed è disponibile, vedere:
+	https://www.vim.org/translations.php
+
+
+COPIE
+
+Vim è un Charityware (ossia eventuali offerte per il suo utilizzo vanno a
+un'attività caritativa).  Vim può essere usato e copiato liberamente, senza
+limitazioni, ma è incoraggiata un'offerta a favore di orfani ugandesi.  Si
+prega di leggere il file "runtime/doc/uganda.txt" per dettagli su come fare
+(il file si può visualizzare digitando ":help uganda" all'interno di Vim).
+
+Sommario della licenza: Non ci sono restrizioni nell'uso e nella distribuzione
+di una copia non modificata di Vim.  Parti di Vim possono anche essere
+distribuite, ma il testo della licenza va sempre incluso.  Per versioni
+modificate di Vim, valgono alcune limitazioni.  La licenza di Vim è
+compatibile con la licenza GPL, è possibile compilare Vim utilizzando librerie
+con licenza GPL e distribuirlo.
+
+
+SPONSORIZZAZIONI
+
+Correggere errori e aggiungere nuove funzionalità richiede tempo e fatica.
+Per mostrare la vostra stima per quest'attività e per fornire motivazioni
+agli sviluppatori perché continuino a lavorare su Vim, siete invitati a
+fare una donazione.
+
+Le somme donate saranno usate principalmente per aiutare dei bambini in
+Uganda.  Vedere "runtime/doc/uganda.txt".  Allo stesso tempo, le donazioni
+aumentano la motivazione del gruppo di sviluppo a continuare a lavorare su
+Vim!
+
+Informazioni più aggiornate sulla sponsorizzazione, possono essere trovate
+sul sito Internet di Vim:
+	https://www.vim.org/sponsor/
+
+
+CONTRIBUIRE
+
+Chi vuole contribuire a rendere Vim ancora migliore, può consultare
+il file CONTRIBUTING.md (in inglese).
+
+
+INFORMAZIONE
+
+Se il vostro sistema operativo è macOS, potete usare MacVim:
+	https://macvim.org
+
+Le ultime notizie riguardo a Vim si possono trovare sulla pagina Internet di
+Vim:
+	https://www.vim.org/
+
+Se avete problemi, è possibile consultare la documentazione Vim e i
+suggerimenti su come utilizzarlo:
+	https://www.vim.org/docs.php
+	https://vim.fandom.com/wiki/Vim_Tips_Wiki
+
+Se avete ancora problemi o qualsiasi altra richiesta, è possibile usare una
+delle mailing list per discuterne con utenti e sviluppatori di Vim:
+	https://www.vim.org/maillist.php
+
+Se nient'altro funziona, potete riferire direttamente i problemi incontrati
+alla mailing list degli sviluppatori, vim-dev:
+	<vim-dev@vim.org>
+
+
+AUTORE PRINCIPALE
+
+La maggior parte di Vim è stata creata da Bram Moolenaar <Bram@vim.org>,
+vedere ":help Bram-Moolenaar"
+
+Spedire tutti gli altri commenti, modifiche al codice sorgente, fiori e
+suggerimenti alla mailing list vim-dev:
+	<vim-dev@vim.org>

lang/README.pt_br.txt

@@ -0,0 +1,131 @@
+README.txt para a versão 9.1 do Vim: Vi IMproved.
+
+O QUE É VIM?
+
+Vim é uma versão muito melhorada do bom e velho editor UNIX Vi. Muitos novos
+recursos foram adicionados: desfazer multinível, destaque de sintaxe, histórico
+de linha de comando, ajuda on-line, verificação ortográfica, completar
+nome de arquivo, operações de bloco, linguagem de script, etc. Há também uma
+interface gráfica (GUI) disponível. Ainda assim, a compatibilidade com Vi é
+mantida, aqueles que têm Vi "nos dedos" se sentirão em casa.
+Veja "runtime/doc/vi_diff.txt" para diferenças com Vi.
+
+Este editor é muito útil para editar programas e outros arquivos de texto
+simples. Todos os comandos são fornecidos com caracteres normais do teclado,
+então aqueles que podem digitar com dez dedos podem trabalhar muito rápido.
+Além disso, as teclas de função podem ser mapeadas para comandos pelo usuário,
+e o mouse pode ser usado.
+
+O Vim funciona em MS-Windows (7, 8, 10, 11), macOS, Haiku, VMS e quase todos
+os sabores do UNIX. A portabilidade para outros sistemas não deve ser difícil.
+Versões mais antigas do Vim rodam em MS-DOS, MS-Windows 95/98/Me/NT/2000/XP/Vista,
+Amiga DOS, Atari MiNT, BeOS, RISC OS e OS/2. Eles não são mais mantidos.
+
+DISTRIBUIÇÃO
+
+Você pode frequentemente usar seu gerenciador de pacotes favorito para
+instalar o Vim. No Mac e Linux, uma pequena versão do Vim é pré-instalada,
+você ainda precisa instalar o Vim se quiser mais recursos.
+
+Existem distribuições separadas para Unix, PC, Amiga e alguns outros sistemas.
+Este arquivo README.txt vem com o arquivo de tempo de execução. Ele inclui a
+documentação, arquivos de sintaxe e outros arquivos que são usados ​​em
+tempo de execução. Para executar o Vim, você deve obter um dos arquivos
+binários ou um arquivo fonte. Qual deles você precisa depende do sistema em
+que deseja executá-lo e se você deseja ou deve compilá-lo você mesmo.
+Verifique "https://www.vim.org/download.php" para uma visão geral das
+distribuições disponíveis atualmente.
+
+Alguns lugares populares para obter o Vim mais recente:
+* Confira o repositório git do github: https://github.com/vim/vim.
+* Obtenha o código-fonte como um arquivo: https://github.com/vim/vim/tags.
+* Obtenha um executável do Windows do repositório vim-win32-installer:
+https://github.com/vim/vim-win32-installer/releases.
+
+COMPILAR
+
+Se você obteve uma distribuição binária, não precisa compilar o Vim. Se você
+obteve uma distribuição de origem, todo o material para compilar o Vim está no
+diretório "src". Veja src/INSTALL para instruções.
+
+INSTALAÇÃO
+
+Veja um desses arquivos para instruções específicas do sistema. No diretório
+READMEdir (no repositório) ou no diretório superior (se você descompactar um
+arquivo):
+
+README_ami.txt		Amiga
+README_unix.txt		Unix
+README_dos.txt		MS-DOS e MS-Windows
+README_mac.txt		Macintosh
+README_haiku.txt	Haiku
+README_vms.txt		VMS
+
+Existem outros arquivos README_*.txt, dependendo da distribuição que você usou.
+
+DOCUMENTAÇÃO
+
+O tutor do Vim é um curso de treinamento de uma hora para iniciantes.
+Frequentemente, ele pode ser iniciado como "vimtutor". Veja ":help tutor"
+para mais informações.
+
+O melhor é usar ":help" no Vim. Se você ainda não tem um executável, leia
+"runtime/doc/help.txt". Ele contém direcionamentos para os outros arquivos
+de documentação. O Manual do Usuário é lido como um livro e é recomendado
+para aprender a usar o Vim. Veja ":help user-manual".
+
+CÓPIA
+
+O Vim é um Charityware. Você pode usá-lo e copiá-lo o quanto quiser, mas
+encorajamos que faça uma doação para ajudar órfãos em Uganda. Leia o arquivo
+"runtime/doc/uganda.txt" para detalhes (execute ":help uganda" dentro do Vim).
+
+Resumo da licença: Não há restrições quanto ao uso ou distribuição de uma
+cópia não modificada do Vim. Partes do Vim também podem ser distribuídas, mas
+o texto da licença deve sempre ser incluído. Para versões modificadas, algumas
+restrições se aplicam. A licença é compatível com GPL, você pode compilar o Vim
+com bibliotecas GPL e distribuí-lo.
+
+PATROCÍNIO
+
+Corrigir bugs e adicionar novos recursos exige muito tempo e esforço.
+Para mostrar seu apreço pelo trabalho e motivar os desenvolvedores a continuar
+trabalhando no Vim, envie uma doação.
+
+O dinheiro que você doou será usado principalmente para ajudar crianças em
+Uganda. Veja "runtime/doc/uganda.txt". Mas, ao mesmo tempo, as doações aumentam
+a motivação da equipe de desenvolvimento para continuar trabalhando no Vim!
+
+Para as informações mais recentes sobre patrocínio, consulte o site do Vim:
+  https://www.vim.org/sponsor/
+
+CONTRIBUIÇÕES
+
+Se você gostaria de ajudar a tornar o Vim melhor, veja o arquivo CONTRIBUTING.md.
+
+INFORMAÇÕES
+
+Se você estiver no macOS, pode usar o MacVim: https://macvim.org
+
+As últimas notícias sobre o Vim podem ser encontradas na página inicial do Vim:
+  https://www.vim.org/
+
+Se você tiver problemas, dê uma olhada na documentação ou dicas do Vim:
+  https://www.vim.org/docs.php
+  https://vim.fandom.com/wiki/Vim_Tips_Wiki
+
+Se você ainda tiver problemas ou quaisquer outras perguntas, use uma das listas
+de discussão para discuti-las com usuários e desenvolvedores do Vim:
+  https://www.vim.org/maillist.php
+
+Se nada mais funcionar, relate os bugs diretamente para a lista de discussão
+vim-dev:
+  <vim-dev@vim.org>
+
+AUTOR PRINCIPAL
+
+A maior parte do Vim foi criada por Bram Moolenaar <Bram@vim.org>,
+":help Bram-Moolenaar"
+
+Envie quaisquer outros comentários, patches, flores e sugestões para
+a lista de discussão vim-dev: <vim-dev@vim.org>

lang/README.ru.txt

@@ -0,0 +1,161 @@
+README.ru.txt для версии 9.1 программы Vim — Vi IMproved.
+
+
+ЧТО ТАКОЕ РЕДАКТОР VIM?
+
+Программа Vim — это значительно улучшенная версия старого доброго редактора Vi
+из системы UNIX.  При разработке этого редактора было добавлено множество новых
+возможностей: многоуровневая отмена изменений, подсветка синтаксиса, журнал
+командной строки, интерактивная справка, проверка орфографии, подстановка
+наименований файлов и команд, операции с произвольными блоками текста,
+встроенный язык программирования и т. д.  Также доступен графический интерфейс
+пользователя (GUI).  И при этом сохраняется совместимость с редактором Vi,
+и те, у кого Vi «в крови», будут чувствовать себя как дома.  Подробности о
+различиях с редактором Vi см. в файле "runtime/doc/vi_diff.txt".
+
+Этот редактор очень удобен для работы с исходным кодом программ, а также
+разного рода других текстовых файлов.  Все команды вводятся набором обычных
+символов клавиатуры, поэтому те, кто освоил десятипальцевый метод печати, могут
+работать очень быстро.  Кроме того, пользователи могут назначить на
+функциональные клавиши клавиатуры необходимые команды, и использовать
+манипулятор «мышь».
+
+Редактор Vim работает в ОС MS Windows (7, 8, 10, 11), macOS, Haiku, VMS и
+практически во всех UNIX-подобных системах.  А перенос на другие платформы не
+должен представлять особой сложности.
+Предыдущие версии редактора Vim работают в операционных системах OS/2, MS-DOS,
+MS Windows 95/98/Me/NT/2000/XP/Vista, AmigaDOS, Atari MiNT, BeOS и RISC OS.
+Но поддержка этих версий больше не осуществляется.
+
+
+ПРЕДОСТАВЛЕНИЕ РЕДАКТОРА Vim
+
+Для установки редактора Vim можно воспользоваться привычным диспетчером пакетов.
+В системах Mac и Linux уже предустановленна начальная версия программы Vim,
+но вам все равно нужно установить редактор Vim, если вы хотите получить больше
+возможностей.
+
+Существуют отдельные версии для Unix, PC, Amiga и некоторых других систем.
+Данный файл README.rux.txt поставляется вместе с архивом рабочих файлов
+программы.  Этот архив включает в себя документацию, файлы подсветки синтаксиса
+и другие файлы, которые используются редактором во время работы.  Чтобы
+запустить программу Vim, вы должны получить либо архив с исполняемыми файлами,
+либо архив с исходным кодом.  Какой из них вам нужен, зависит от того, на какой
+системе вы хотите запустить редактор Vim, и есть ли для этой системы
+исполняемые файлы или вы должны компилировать программу самостоятельно.
+Чтобы узнать о доступных в настоящее время пакетах программы, посмотрите на
+веб‐странице https://www.vim.org/download.php.
+
+Несколько полезных мест, где можно получить последнюю версию редактора Vim:
+* Посмотрите в git-хранилище на GitHub: https://github.com/vim/vim.
+* Получить исходный код в виде архива: https://github.com/vim/vim/tags.
+* Получить исполняемый файл для ОС Windows из хранилища vim-win32-installer:
+https://github.com/vim/vim-win32-installer/releases.
+
+
+КОМПИЛЯЦИЯ РЕДАКТОРА Vim
+
+Если для вашей системы уже есть готовые исполняемые файлы, вам не нужно самому
+компилировать редактор Vim.  Если вы скачали архив с исходным кодом, то всё
+необходимое для компиляции программы Vim находится в каталоге "src".
+Инструкции смотрите в файле src/INSTALL.
+
+
+УСТАНОВКА ПРОГРАММЫ Vim
+
+Инструкции для конкретной системы смотрите в одном из нижеуказанных файлов.
+Или в каталоге READMEdir (на https://github.com/vim/vim), или в основном
+каталоге (если вы распаковываете архив):
+
+README_ami.txt		Amiga
+README_unix.txt		Unix
+README_dos.txt		MS-DOS и MS Windows
+README_mac.txt		Macintosh
+README_haiku.txt	Haiku
+README_vms.txt		VMS
+
+Существует ещё несколько файлов README_*.txt, в зависимости от предоставляемого
+пакета.
+
+
+ДОКУМЕНТАЦИЯ ПО РЕДАКТОРУ Vim
+
+Учебник Vim — это часовой практический курс для начинающих.  Как правило, для
+работы с ним нужно набрать команду "vimtutor".  Чтобы получить дополнительную
+информацию, смотрите раздел документации ":help tutor".
+
+Лучше всего воспользоваться командой ":help" в редакторе Vim.  Если у вас ещё
+нет исполняемого файла программы, прочитайте файл "runtime/doc/help.txt".
+В нём содержатся отсылки на другие полезные файлы документации.  Руководство
+пользователя можно читать как книгу, и оно рекомендуется для обучения работе
+с редактором Vim.  Смотрите ":help user-manual".
+
+
+ЛИЦЕНЗИОННЫЕ ПРАВА
+
+Редактор Vim является благотворительным программным обеспечением.
+Использование и копирование программы Vim не ограничено, однако рекомендуется
+сделать добровольное пожертвование для нуждающихся детей в Уганде.  Чтобы узнать
+подробности, прочитайте, пожалуйста, файл "runtime/doc/uganda.rux" (введите
+команду ":help uganda" в редакторе Vim).
+
+Краткое описание лицензии.
+Нет никаких ограничений на использование или распространение немодифицированной
+копии программы Vim.  Части программы Vim также могут предоставляться отдельно,
+но текст лицензии Vim всегда должен быть включён в поставку.
+Для модифицированных версий программы действует несколько ограничений.
+Лицензия Vim совместима с лицензией GNU GPL, вы можете компилировать
+и распространять программу Vim с библиотеками, лицензированными под GNU GPL.
+
+
+ФИНАНСОВАЯ ПОДДЕРЖКА ДЛЯ РАЗРАБОТКИ РЕДАКТОРА Vim
+
+Устранение ошибок и добавление новых функциональных возможностей требует
+вложения немалого количества времени и сил.  Выразить признательность за труд
+и подкрепить заинтересованность разработчиков программы в дальнейшей работе
+над редактором Vim можно с помощью оказания финансовой поддержки.
+
+Пожертвованные вами деньги будут в основном направлены на оказание помощи детям
+Уганды, см. "runtime/doc/uganda.rux".  Однако в любом случае финансирование
+будет способствовать повышению заинтересованности команды разработчиков
+в продолжении работы над редактором Vim!
+
+Самая свежая информация об оказании финансовой поддержки публикуется на
+веб-сайте программы Vim:
+	https://www.vim.org/sponsor/
+
+
+ПОМОЩЬ В РАЗРАБОТКЕ РЕДАКТОРА Vim
+
+Если вы хотите помочь сделать редактор Vim лучше, смотрите файл CONTRIBUTING.md.
+
+
+ДОПОЛНИТЕЛЬНАЯ ИНФОРМАЦИЯ
+
+Для системе macOS вы може использовать MacVim:  https://macvim.org
+
+Последние новости о редакторе Vim можно найти на его домашней странице:
+	https://www.vim.org/
+
+Если у вас возникли вопросы, посмотрите полезные советы или документацию по
+редактору Vim:
+	https://www.vim.org/docs.php
+	https://vim.fandom.com/wiki/Vim_Tips_Wiki
+
+Если у вас все ещё остались вопросы или есть сложности, воспользуйтесь одним
+из списков рассылки, чтобы обсудить их с пользователями и разработчиками:
+	https://www.vim.org/maillist.php
+
+Если ничего не помогает, сообщайте об ошибках непосредственно в список рассылки
+vim-dev:
+	<vim-dev@vim.org>
+
+
+ОСНОВНОЙ АВТОР ПРОГРАММЫ
+
+Большая часть редактора Vim была создана Брамом Моленаром <Bram@vim.org>,
+см. ":help Bram-Moolenaar"
+
+Присылайте все прочие комментарии, исправления, цветы и предложения в список
+рассылки vim-dev:
+	<vim-dev@vim.org>

nsis/Make_mvc.mak

@@ -0,0 +1,134 @@
+#
+# Makefile for MS Windows for create self-installing exe of Vim.
+# 05/04/2024, Restorer restorer@mail2k.ru
+#
+
+
+#!INCLUDE .\Make_all.mak
+
+.SUFFIXES :
+
+!IFDEF PROGRAMW6432
+ProgFiles=%%PROGRAMFILES(x86)%%
+!ELSE
+ProgFiles=$(PROGRAMFILES)
+!ENDIF
+
+!IFDEF VIMSRC
+MKNSISFLAGS = /D"VIMSRC=$(VIMSRC)"
+!ENDIF
+
+!IFDEF VIMRT
+MKNSISFLAGS = $(MKNSISFLAGS) /D"VIMRT=$(VIMRT)"
+!ENDIF
+
+!IFDEF VIMTOOLS
+MKNSISFLAGS = $(MKNSISFLAGS) /D"VIMTOOLS=$(VIMTOOLS)"
+!ENDIF
+
+!IFDEF GETTEXT
+MKNSISFLAGS = $(MKNSISFLAGS) /D"GETTEXT=$(GETTEXT)"
+!ENDIF
+
+!IFDEF HAVE_UPX
+MKNSISFLAGS = $(MKNSISFLAGS) /DHAVE_UPX=$(HAVE_UPX)
+!ENDIF
+
+!IFDEF HAVE_NLS
+MKNSISFLAGS = $(MKNSISFLAGS) /DHAVE_NLS=$(HAVE_NLS)
+!ENDIF
+
+!IFDEF HAVE_MULTI_LANG
+MKNSISFLAGS = $(MKNSISFLAGS) /DHAVE_MULTI_LANG=$(HAVE_MULTI_LANG)
+!ENDIF
+
+!IFDEF WIN64
+MKNSISFLAGS = $(MKNSISFLAGS) /DWIN64=$(WIN64)
+!ENDIF
+
+!IFDEF INCLUDE_LIBGCC
+MKNSISFLAGS = $(MKNSISFLAGS) /DINCLUDE_LIBGCC=$(INCLUDE_LIBGCC)
+!ENDIF
+
+!IFDEF X
+XX = /X"$(X:;=" /X")"
+!ENDIF
+
+# If necessary, correct the full path of the NSIS compiler in the next line.
+# Please do not enclose the path in quotation marks.
+MKNSIS = $(ProgFiles)\NSIS
+
+PS = powershell.exe
+RM = del /f /q
+RD = rmdir /s /q
+
+MKNSISFLAGS = /INPUTCHARSET UTF8 $(MKNSISFLAGS)
+PSFLAGS = -NoLogo -NoProfile -Command
+
+# Read MAJOR and MINOR from version.h.
+!IF ![for /F "tokens=2,3" %G in ( \
+	'findstr /rc:"VIM_VERSION_MINOR[	^]*[0-9^]" \
+	/rc:"VIM_VERSION_MAJOR[	^]*[0-9^]" ..\src\version.h') do \
+	@if "VIM_VERSION_MAJOR"=="%G" (echo MAJOR=%H>>_ver.tmp) \
+	else echo MINOR=%H>>_ver.tmp]
+! INCLUDE .\_ver.tmp
+! IF [$(RM) .\_ver.tmp]
+! ENDIF
+!ENDIF
+
+# Read PATCHLEVEL from version.c
+!IF ![for /F %G in ( \
+	'findstr /nblc:"static int included_patches[^]" ..\src\version.c \
+	^| (set /p "_t=" ^& set /a _t+=2 ^)') do \
+	@cmd /q /c "for /F "skip=%G delims=, " %H in (..\src\version.c) do \
+			(echo PATCH=%H>_patchlvl.tmp & exit /b)"]
+! INCLUDE .\_patchlvl.tmp
+! IF [$(RM) .\_patchlvl.tmp]
+! ENDIF
+!ENDIF
+!IF $(PATCH) < 10
+PATCH = 000$(PATCH)
+!ELSEIF $(PATCH) < 100
+PATCH = 00$(PATCH)
+!ELSEIF $(PATCH) < 1000
+PATCH = 0$(PATCH)
+!ENDIF
+
+
+all : makeinst
+
+makeinst : prepare
+	^"$(MKNSIS)\makensis.exe" $(MKNSISFLAGS) gvim.nsi $(XX)
+
+prepare : unzipicons gvim_version.nsh license rename
+
+unzipicons : icons.zip
+	@ if exist %|fF\nul $(RD) %|fF
+	@ $(PS) $(PSFLAGS) \
+		Add-Type -AssemblyName 'System.IO.Compression.FileSystem'; \
+		[System.IO.Compression.ZipFile]::ExtractToDirectory(\"$**\", \".\")
+
+gvim_version.nsh : Make_mvc.mak
+	@ 1> $@ echo:^# Generated from Makefile: define the version numbers
+	@ 1>> $@ echo:^!ifndef __GVIM_VER__NSH__
+	@ 1>> $@ echo:^!define __GVIM_VER__NSH__
+	@ 1>> $@ echo:^!define VER_MAJOR $(MAJOR)
+	@ 1>> $@ echo:^!define VER_MINOR $(MINOR)
+	@ 1>> $@ echo:^!define PATCHLEVEL $(PATCH)
+	@ 1>> $@ echo:^!endif
+
+license : ..\lang\LICENSE.*.txt ..\LICENSE
+	!@ $(PS) $(PSFLAGS) \
+		Get-Content -Path '$**' -Encoding UTF8 ^| \
+		Set-Content -Path '..\lang\$(**B).nsis.txt' -Enc Unicode -Force
+
+rename :
+	@ ..\tools\rename.bat "$(SRC)" "$(DST)" 1> nul
+
+clean :
+	@ if exist .\gvim_version.nsh $(RM) .\gvim_version.nsh
+	@ if exist ..\lang\LICENSE*.nsis.txt $(RM) ..\lang\LICENSE*.nsis.txt
+	@ if exist .\icons\nul $(RD) .\icons
+	@ if exist .\gvim??.exe $(RM) .\gvim??.exe
+
+# vim: set noet sw=8 ts=8 sts=0 wm=0 tw=0 ft=make:

nsis/Makefile

@@ -0,0 +1,95 @@
+#
+# Makefile for UNIX-like for create self-installing exe of Vim.
+# 15/12/2024, Restorer restorer@mail2k.ru
+#
+
+
+.SUFFIXES:
+.PHONY: all makeinst prepare rename clean 
+
+ifdef VIMSRC
+MKNSISFLAGS := -D"VIMSRC=$(VIMSRC)"
+endif
+
+ifdef VIMRT
+MKNSISFLAGS := $(MKNSISFLAGS) -D"VIMRT=$(VIMRT)"
+endif
+
+ifdef VIMTOOLS
+MKNSISFLAGS := $(MKNSISFLAGS) -D"VIMTOOLS=$(VIMTOOLS)"
+endif
+
+ifdef GETTEXT
+MKNSISFLAGS := $(MKNSISFLAGS) -D"GETTEXT=$(GETTEXT)"
+endif
+
+ifdef HAVE_UPX
+MKNSISFLAGS := $(MKNSISFLAGS) -DHAVE_UPX=$(HAVE_UPX)
+endif
+
+ifdef HAVE_NLS
+MKNSISFLAGS := $(MKNSISFLAGS) -DHAVE_NLS=$(HAVE_NLS)
+endif
+
+ifdef HAVE_MULTI_LANG
+MKNSISFLAGS := $(MKNSISFLAGS) -DHAVE_MULTI_LANG=$(HAVE_MULTI_LANG)
+endif
+
+ifdef WIN64
+MKNSISFLAGS := $(MKNSISFLAGS) -DWIN64=$(WIN64)
+endif
+
+ifdef INCLUDE_LIBGCC
+MKNSISFLAGS := $(MKNSISFLAGS) -DINCLUDE_LIBGCC=$(INCLUDE_LIBGCC)
+endif
+
+ifdef X
+XX := -X"$(X:;=" -X")"
+endif
+
+MAJOR != grep -E 'VIM_VERSION_MAJOR\s{2,}' ../src/version.h | \
+	awk '{ printf "%d",$$3 }'
+MINOR != grep -E 'VIM_VERSION_MINOR\s{2,}' ../src/version.h | \
+	awk '{ printf "%d",$$3 }'
+PATCH != awk '/number below this line/,/,/' ../src/version.c | \
+	awk 'NR == 3 { printf "%04d",$$1 }' | sed -e 's/[ ,]//g'
+
+MKNSISFLAGS := -INPUTCHARSET UTF8 $(MKNSISFLAGS)
+
+all: makeinst
+
+makeinst: prepare
+	makensis $(MKNSISFLAGS) gvim.nsi $(XX)
+
+prepare: unzipicons gvim_version.nsh license rename
+
+unzipicons: icons.zip
+	if test -d `basename $? .zip` ; then rm -rf `basename $? .zip` ; fi
+	unzip $?
+
+gvim_version.nsh: Makefile
+	echo "# Generated from Makefile: define the version numbers" > $@
+	echo "!ifndef __GVIM_VER__NSH__"  >> $@
+	echo "!define __GVIM_VER__NSH__"  >> $@
+	echo "!define VER_MAJOR $(MAJOR)" >> $@
+	echo "!define VER_MINOR $(MINOR)" >> $@
+	echo "!define PATCHLEVEL $(PATCH)" >> $@
+	echo "!endif" >> $@
+
+license: ../lang/LICENSE.*.txt ../LICENSE
+	for lic in $? ; do \
+		bn=`basename $$lic .txt` ; \
+		awk 'sub("$$", "\r")' < $$lic | \
+		iconv -f UTF-8 -t UTF-16 > ../lang/$$bn.nsis.txt ; \
+	done
+
+rename:
+	../tools/rename.bat "$(SRC)" "$(DST)"
+
+clean:
+	if test -f gvim_version.nsh ; then rm -f gvim_version.nsh ; fi
+	rm -f ../lang/LICENSE*.nsis.txt
+	if test -d icons ; then rm -rf icons ; fi
+	if test -f gvim??.exe ; then rm -f gvim??.exe ; fi
+
+# vim: set noet sw=8 ts=8 sts=0 wm=0 tw=0 ft=make:

nsis/README.txt

@@ -0,0 +1,108 @@
+This builds a one-click install for Vim for MS Windows using the Nullsoft
+Installation System (NSIS), available at http://nsis.sourceforge.net/
+
+To build the installable .exe file:
+
+Preparatory stage
+
+1.  Clone using the git tool the Vim repository or download its zip file
+    available at:
+	https://github.com/vim/vim
+
+2.  Go to the "/src" directory and build the Vim editor, making sure to use the
+    following variable values: "GUI=yes"; "OLE=yes"; "VIMDLL=yes". See
+    INSTALLpc.txt and Make_mvc.mak for details.
+
+3.  Go to the GvimExt directory and build gvimext.dll (or get it from a binary
+    archive).  Both 64- and 32-bit versions are needed and should be placed
+    as follows:
+	64-bit: src/GvimExt/gvimext64.dll
+	32-bit: src/GvimExt/gvimext.dll
+
+4.  Get a "diff.exe" program.  If you skip this the built-in diff will always
+    be used (which is fine for most users).
+    You can find one in previous Vim versions or in this archive:
+	https://www.mediafire.com/file/9edk4g3xvfgzby0/diff4Vim.zip/file
+    When will you have "diff.exe" put it in the "../.." directory (above the
+    "vim91" directory, it's the same for all Vim versions).  However, you can
+    specify a different directory by specifying the appropriate makefile value.
+    How to do this is described below.
+
+5.  For the terminal window to work in Vim, the library winpty is required.
+    You can get it at the following url:
+	https://github.com/rprichard/winpty/releases/download/0.4.3/winpty-0.4.3-msvc2015.zip
+    For the 32-bit version, rename "winpty.dll" from ia32/bin to "winpty32.dll",
+    and for the 64-bit version — "winpty.dll" from x64/bin to "winpty64.dll".
+    Put the renamed file and "winpty-agent.exe" in "../.." (above the "vim91"
+    directory).  However, you can specify a different directory by specifying
+    the appropriate makefile value. How to do this is described below. 
+
+6.  To use stronger encryption, add the Sodium library.  You can get it here:
+	https://github.com/jedisct1/libsodium/releases/download/1.0.19-RELEASE/libsodium-1.0.19-msvc.zip
+    Unpack the archive.  Put the "libsodium.dll" from
+    path/to/libsodium/Win32/Release/v143/dynamic for the 32‐bit version or
+    path/to/libsodium/X64/Release/v143/dynamic for the 64‐bit version in the
+    "../.." directory (above the "vim91" directory, where "diff.exe" and
+    "winpty{32|64}.dll").
+
+7.  Get gettext and iconv DLLs from the following site:
+	https://github.com/mlocati/gettext-iconv-windows/releases
+    Both 64- and 32-bit versions are needed.
+    Download the files gettextX.X.X.X-iconvX.XX-shared-{32,64}.zip, extract
+    DLLs and place them as follows:
+
+	<GETTEXT directory>
+	    |
+	    + gettext32/
+	    |	libintl-8.dll
+	    |	libiconv-2.dll
+	    |	libgcc_s_sjlj-1.dll
+	    |
+	    + gettext64/
+		libintl-8.dll
+		libiconv-2.dll
+
+    The default <GETTEXT directory> is "../..".  However, you can specify a
+    different directory by specifying the appropriate makefile value. How to do
+    this is described below. 
+
+8.  Install NSIS if you didn't do that already.
+    Download Unicode version the ShellExecAsUser plug-in for NSIS from:
+	https://nsis.sourceforge.io/ShellExecAsUser_plug-in
+    and put "ShellExecAsUser.dll" to path\to\NSIS\Plugins\x86-unicode
+
+Installer assembly stage
+
+    On MS Windows, open the Developer Command Prompt for VS and go to the
+    "/nsis" directory and type the command
+	    nmake.exe -lf Make_mvc.mak [variables] all
+
+    After the installer is created and you copy it to the desired location, run
+    the following command in the "/nsis" directory
+	    nmake.exe -lf Make_mvc.mak clean
+    
+    On UNIX-like systems, go to the "/nsis" directory and type the command
+	    make -f Makefile [variables] all
+
+    After the installer is created and you copy it to the desired location, run
+    the following command in the "/nsis" directory
+	    make -f Makefile clean
+
+Variables and their values available for building the installer (not mandatory):
+
+    "VIMSRC=<dir>"	— directory where location of gvim_ole.exe, vimw32.exe,
+			    GvimExt/*, etc.
+    "VIMRT=<dir>"	— directory where location of runtime files.
+    "VIMTOOLS=<dir>"    — directory where location of extra tools: diff.exe,
+			    winpty{32|64}.dll, winpty-agent.exe, libsodium.dll.
+    "GETTEXT=<dir>"     — directory where location of gettext libraries.
+    "HAVE_UPX=1"	— additional compression of the installer.  UPX program
+			    must be installed.
+    "HAVE_NLS=0"	— do not add native language support.
+    "HAVE_MULTI_LANG=0" — to create an English-only the installer.
+    "WIN64=1"		— to create a 64-bit the installer.
+    "X=<scriptcmd>"	— executes scriptcmd in script.  If multiple scriptcmd
+			    are specified, they are separated by a semicolon.
+			    Example "X=OutFile MyVim.exe;XPMode on"
+    "MKNSIS=<dir>"	— the directory where the "makensis.exe" program is
+			    located.

nsis/gvim_version.nsh

@@ -0,0 +1,7 @@
+# Generated from Makefile: define the version numbers
+!ifndef __GVIM_VER__NSH__
+!define __GVIM_VER__NSH__
+!define VER_MAJOR 9
+!define VER_MINOR 1
+!define PATCHLEVEL 0
+!endif

nsis/lang/README.txt

@@ -0,0 +1,63 @@
+This directory contains a file with text strings for gVim installer.
+It also contains files with translations of the text strings for gVim installer
+into different languages.
+
+For translators.
+
+If you want to prepare a translation for the gVim installer, use the file
+"english.nsi" as a master file.  See the other translation files in this
+directory.
+Note that in the definition of the MUI_LANGUAGE macro, the name of the language
+to be translated must be the English name of the language.
+The name of the file with the translation must match the name of the target
+language.
+Also, when translating strings, pay attention to some restrictions on the
+allowable length of strings.  For example:
+ component description field - 117 characters;
+ description above the drop-down lists on the .vimrc page - 53 characters;
+ drop-down lists on the .vimrc page - 55 characters.
+Characters in this case mean characters of the English alphabet.
+
+Once the message translation file is ready, it must be included in the
+"gvim.nsi" file.
+Find the line "# Include support for other languages:" in the file "gvim.nsi"
+and specify the name of the file with your translation below the line
+!if ${HAVE_MULTI_LANG}, similar to the entries already there. File names are
+specified in alphabetical order.
+
+If you do not yet have a translated "LICENSE" file and/or a main "README.txt"
+file, set the following values:
+
+for the license file
+LicenseLangString page_lic_file 0 "..\lang\LICENSE.nsis.txt"
+
+for the readme.txt file
+LangString vim_readme_file 0 "README.txt"
+
+Once you have the translations of these files, then set the values for these
+variables similarly to what is done in the other translation files.
+Translation files should be located in the "lang" subdirectory of the root
+directory. The name of the files is as follows: "README.xx.txt", where xx is the
+language code according to ISO639.
+
+
+There are two ways to test the installer in different languages:
+
+1. Find and uncomment the "!define MUI_LANGDLL_ALWAYSSHOW" line in the
+   "gvim.nsi" file and rebuild the installer.
+   Now every time you run it, you will see a dialog box with the possibility to
+   select the language of the installer.
+
+2. If the Vim editor is already installed in your system, delete the
+   "Installer Language" parameter in the Windows registry under
+   "HKEY_CURRENT_USER\Software\Vim".
+   Or you can create a file "NoLangInstallerVim.reg" with the following content:
+
+	Windows Registry Editor Version 5.00
+
+	[HKEY_CURRENT_USER\Software\Vim]
+	"Installer Language"=-
+
+   and apply it by double-clicking on it.
+   After these steps, when you start the installer, a window with the installer
+   language selection will also be displayed. 

nsis/lang/danish.nsi

@@ -0,0 +1,187 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# danish.nsi: Danish language strings for gvim NSIS installer.
+#
+# Locale ID    : 1030
+# Locale Name  : da
+# fileencoding : UTF-8
+# Author       : scootergrisen
+
+!insertmacro MUI_LANGUAGE "Danish"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_DANISH}         "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_DANISH}         "$(^Name) Uninstall"
+
+##############################################################################
+# Translated license file for the license page                            {{{1
+##############################################################################
+
+LicenseLangString page_lic_file 0 "..\lang\LICENSE.nsis.txt"
+#LicenseLangString page_lic_file ${LANG_DANISH} "..\lang\LICENSE.da.nsis.txt"
+
+##############################################################################
+# Translated README.txt file, which is opened after installation          {{{1
+##############################################################################
+
+LangString vim_readme_file 0 "README.txt"
+#LangString vim_readme_file ${LANG_DANISH} "README.da.txt"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_DANISH}     "Destinationsmappe (skal slutte med $\"vim$\")"
+
+LangString str_show_readme          ${LANG_DANISH}     "Vis README efter installationen er gennemført"
+
+# Install types:
+LangString str_type_typical         ${LANG_DANISH}     "Typisk"
+
+LangString str_type_minimal         ${LANG_DANISH}     "Minimal"
+
+LangString str_type_full            ${LANG_DANISH}     "Fuld"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_DANISH}     "Afinstaller eksisterende version(er)"
+LangString str_desc_old_ver         ${LANG_DANISH}     "Afinstaller eksisterende Vim-version(er) fra dit system."
+
+LangString str_section_exe          ${LANG_DANISH}     "Vim GUI og afviklingsfiler"
+LangString str_desc_exe             ${LANG_DANISH}     "Vim GUI-eksekverbare- og afviklingsfiler. Komponenten kræves."
+
+LangString str_section_console      ${LANG_DANISH}     "Vim-konsolprogram"
+LangString str_desc_console         ${LANG_DANISH}     "Konsolversion af Vim (vim.exe)."
+
+LangString str_section_batch        ${LANG_DANISH}     "Opret .bat-filer"
+LangString str_desc_batch           ${LANG_DANISH}     "Opret .bat-filer til Vim-varianter i Windows-mappen til brug fra kommandolinjen."
+
+LangString str_group_icons          ${LANG_DANISH}     "Opret ikoner til Vim"
+LangString str_desc_icons           ${LANG_DANISH}     "Opret ikoner til Vim diverse steder for at hjælpe med at gøre adgangen let."
+
+LangString str_section_desktop      ${LANG_DANISH}     "På skrivebordet"
+LangString str_desc_desktop         ${LANG_DANISH}     "Opret ikoner til gVim-eksekverbare på skrivebordet."
+
+LangString str_section_start_menu   ${LANG_DANISH}     "I Programmer-mappen i menuen Start"
+LangString str_desc_start_menu      ${LANG_DANISH}     "Tilføj Vim i Programmer-mappen i menuen Start."
+
+#LangString str_section_quick_launch ${LANG_DANISH}     "I værktøjslinjen Hurtig start"
+#LangString str_desc_quick_launch    ${LANG_DANISH}     "Tilføj Vim-genvej i værktøjslinjen Hurtig start."
+
+LangString str_section_edit_with    ${LANG_DANISH}     "Tilføj Vim-genvejsmenu"
+LangString str_desc_edit_with       ${LANG_DANISH}     "Tilføj Vim til listen i $\"Åbn med...$\"-genvejsmenuen."
+
+#LangString str_section_edit_with32  ${LANG_DANISH}     "32-bit-version"
+#LangString str_desc_edit_with32     ${LANG_DANISH}     "Tilføj Vim til listen i $\"Åbn med...$\"-genvejsmenuen for 32-bit-programmer."
+
+#LangString str_section_edit_with64  ${LANG_DANISH}     "64-bit-version"
+#LangString str_desc_edit_with64     ${LANG_DANISH}     "Tilføj Vim til listen i $\"Åbn med...$\"-genvejsmenuen for 64-bit-programmer."
+
+LangString str_section_vim_rc       ${LANG_DANISH}     "Opret standardkonfiguration"
+LangString str_desc_vim_rc          ${LANG_DANISH}     "Opret en standardkonfigurationsfil (_vimrc) hvis der ikke allerede findes en."
+
+LangString str_group_plugin         ${LANG_DANISH}     "Opret plugin-mapper"
+LangString str_desc_plugin          ${LANG_DANISH}     "Opret plugin-mapper. Plugin-mapper giver mulighed for at udvide Vim ved at slippe en fil i en mappen."
+
+LangString str_section_plugin_home  ${LANG_DANISH}     "Private"
+LangString str_desc_plugin_home     ${LANG_DANISH}     "Opret plugin-mapper i HOME (hvis du har defineret et) eller Vim-installationsmappe."
+
+LangString str_section_plugin_vim   ${LANG_DANISH}     "Delte"
+LangString str_desc_plugin_vim      ${LANG_DANISH}     "Opret plugin-mapper i Vim-installationsmappe, det bruges af alle på systemet."
+
+LangString str_section_nls          ${LANG_DANISH}     "Understøttelse af modersmål"
+LangString str_desc_nls             ${LANG_DANISH}     "Installer filer til understøttelse af modersmål."
+
+LangString str_unsection_register   ${LANG_DANISH}     "Afregistrer Vim"
+LangString str_desc_unregister      ${LANG_DANISH}     "Afregistrer Vim fra systemet."
+
+LangString str_unsection_exe        ${LANG_DANISH}     "Fjern Vim-eksekverbare-/afviklingsfiler"
+LangString str_desc_rm_exe          ${LANG_DANISH}     "Fjern alle Vim-eksekverbare- og afviklingsfiler."
+
+LangString str_ungroup_plugin       ${LANG_DANISH}     "Fjern plugin-mapper"
+LangString str_desc_rm_plugin       ${LANG_DANISH}     "Fjern plugin-mapperne, hvis de er tomme."
+
+LangString str_unsection_plugin_home ${LANG_DANISH}     "Private"
+LangString str_desc_rm_plugin_home  ${LANG_DANISH}     "Fjern plugin-mapperne fra HOME-mappen."
+
+LangString str_unsection_plugin_vim ${LANG_DANISH}     "Delte"
+LangString str_desc_rm_plugin_vim   ${LANG_DANISH}     "Fjern plugin-mapperne fra Vim-installationsmappen."
+
+LangString str_unsection_rootdir    ${LANG_DANISH}     "Fjern Vim-rodmappen"
+LangString str_desc_rm_rootdir      ${LANG_DANISH}     "Fjern Vim-rodmappen. Den indeholder dine Vim-konfigurationsfiler!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_DANISH}     "Fandt $vim_old_ver_count Vim-versioner på dit system.$\r$\nInstallationsguiden kan højst håndtere ${VIM_MAX_OLD_VER}-versioner.$\r$\nFjern venligst nogle versioner og start igen."
+
+#LangString str_msg_invalid_root  ${LANG_DANISH}     "Ugyldig installationssti: $vim_install_root!$\r$\nDen skal slutte med $\"vim$\"."
+
+#LangString str_msg_bin_mismatch  ${LANG_DANISH}     "Uoverensstemmelse i binære sti!$\r$\n$\r$\nForventede at den binære sti var $\"$vim_bin_path$\",$\r$\nmen systemet indikerer at den binære sti er $\"$INSTDIR$\"."
+
+#LangString str_msg_vim_running   ${LANG_DANISH}     "Vim kører stadig på dit system.$\r$\nLuk venligst alle instanser af Vim inden du fortsætter."
+
+#LangString str_msg_register_ole  ${LANG_DANISH}     "Forsøger at registrere Vim med OLE. Der er ingen meddelelse til at indikere om det virker eller ej."
+
+#LangString str_msg_unreg_ole     ${LANG_DANISH}     "Forsøger at afregistrere Vim med OLE. Der er ingen meddelelse til at indikere om det virker eller ej."
+
+#LangString str_msg_rm_start      ${LANG_DANISH}     "Afinstallerer følgende version:"
+
+#LangString str_msg_rm_fail       ${LANG_DANISH}     "Kunne ikke afinstallere følgende version:"
+
+#LangString str_msg_no_rm_key     ${LANG_DANISH}     "Kan ikke finde registreringsdatabasenøgle for afinstallationsguiden."
+
+#LangString str_msg_no_rm_reg     ${LANG_DANISH}     "Kan ikke finde afinstallationsguiden fra registreringsdatabasen."
+
+#LangString str_msg_no_rm_exe     ${LANG_DANISH}     "Kan ikke tilgå afinstallationsguide."
+
+#LangString str_msg_rm_copy_fail  ${LANG_DANISH}     "Kunne ikke kopiere afinstallationsguide til midlertidig mappe."
+
+#LangString str_msg_rm_run_fail   ${LANG_DANISH}     "Kunne ikke køre afinstallationsguide."
+
+#LangString str_msg_abort_install ${LANG_DANISH}     "Installationsguiden vil afbryde."
+
+LangString str_msg_install_fail  ${LANG_DANISH}     "Installationen mislykkedes. Bedre held næste gang."
+
+LangString str_msg_rm_exe_fail   ${LANG_DANISH}     "Nogle filer i $0 er ikke blevet slettet!$\r$\nDu skal gøre det manuelt."
+
+#LangString str_msg_rm_root_fail  ${LANG_DANISH}     "ADVARSEL: Kan ikke fjerne $\"$vim_install_root$\", den er ikke tom!"
+
+LangString str_msg_uninstalling  ${LANG_DANISH}     "Afinstallerer den gamle version..."
+
+LangString str_msg_registering   ${LANG_DANISH}     "Registrerer..."
+
+LangString str_msg_unregistering ${LANG_DANISH}     "Afregistrerer..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_DANISH}     "Vælg _vimrc-indstillinger"
+LangString str_vimrc_page_subtitle ${LANG_DANISH}     "Vælg indstillingerne til forbedring, tastatur og mus."
+
+LangString str_msg_compat_title    ${LANG_DANISH}     " Vi- / Vim-opførsel "
+LangString str_msg_compat_desc     ${LANG_DANISH}     "&Kompatibilitet og forbedringer"
+LangString str_msg_compat_vi       ${LANG_DANISH}     "Vi-kompatibel"
+LangString str_msg_compat_vim      ${LANG_DANISH}     "Vim original"
+LangString str_msg_compat_defaults ${LANG_DANISH}     "Vim med nogle forbedringer (indlæs defaults.vim)"
+LangString str_msg_compat_all      ${LANG_DANISH}     "Vim med alle forbedringer (indlæs vimrc_example.vim) (standard)"
+
+LangString str_msg_keymap_title   ${LANG_DANISH}     " Tilknytninger "
+LangString str_msg_keymap_desc    ${LANG_DANISH}     "&Gentilknyt nogle få taster for Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F osv.)"
+LangString str_msg_keymap_default ${LANG_DANISH}     "Gentilknyt ikke taster (standard)"
+LangString str_msg_keymap_windows ${LANG_DANISH}     "Gentilknyt nogle få taster"
+
+LangString str_msg_mouse_title   ${LANG_DANISH}     " Mus "
+LangString str_msg_mouse_desc    ${LANG_DANISH}     "&Opførsel af højre og venstre knapper"
+LangString str_msg_mouse_default ${LANG_DANISH}     "Højre: genvejsmenu, venstre: visuel tilstand (standard)"
+LangString str_msg_mouse_windows ${LANG_DANISH}     "Højre: genvejsmenu, venstre: vælg-tilstand (Windows)"
+LangString str_msg_mouse_unix    ${LANG_DANISH}     "Højre: udvider markering, venstre: visuel tilstand (Unix)"

nsis/lang/dutch.nsi

@@ -0,0 +1,290 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# dutch.nsi : Dutch language strings for gvim NSIS installer.
+#
+# Locale ID    : 1043
+# Locale Name  : nl
+# fileencoding : UTF-8
+# Author       : Peter Odding <peter@peterodding.com>
+
+!insertmacro MUI_LANGUAGE "Dutch"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_DUTCH} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_DUTCH} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# Translated license file for the license page                            {{{1
+##############################################################################
+
+LicenseLangString page_lic_file 0 "..\lang\LICENSE.nsis.txt"
+#LicenseLangString page_lic_file ${LANG_DUTCH} "..\lang\LICENSE.nl.nsis.txt"
+
+##############################################################################
+# Translated README.txt file, which is opened after installation          {{{1
+##############################################################################
+
+LangString vim_readme_file 0 "README.txt"
+#LangString vim_readme_file ${LANG_DUTCH} "README.nl.txt"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_DUTCH} \
+#    "Doelmap (moet eindigen op $\"vim$\")"
+
+LangString str_show_readme          ${LANG_DUTCH} \
+    "README weergeven na installatie"
+
+# Install types:
+LangString str_type_typical         ${LANG_DUTCH} \
+    "Gebruikelijk"
+
+LangString str_type_minimal         ${LANG_DUTCH} \
+    "Minimaal"
+
+LangString str_type_full            ${LANG_DUTCH} \
+    "Volledig"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_DUTCH} \
+    "Bestaande versie(s) de-installeren"
+LangString str_desc_old_ver         ${LANG_DUTCH} \
+    "Bestaande Vim versie(s) van je systeem verwijderen."
+
+LangString str_section_exe          ${LANG_DUTCH} \
+    "Vim GUI"
+LangString str_desc_exe             ${LANG_DUTCH} \
+    "Vim GUI uitvoerbare bestanden en runtime bestanden.  Dit component is vereist."
+
+LangString str_section_console      ${LANG_DUTCH} \
+    "Vim console programma"
+LangString str_desc_console         ${LANG_DUTCH} \
+    "Console versie van Vim (vim.exe)."
+
+LangString str_section_batch        ${LANG_DUTCH} \
+    "Creëer .bat bestanden"
+LangString str_desc_batch           ${LANG_DUTCH} \
+    "Creëer .bat bestanden voor Vim varianten in de Windows map voor \
+     commando regel gebruik."
+
+LangString str_group_icons          ${LANG_DUTCH} \
+    "Creëer pictogrammen for Vim"
+LangString str_desc_icons           ${LANG_DUTCH} \
+    "Creëer pictogrammen voor Vim op verschillende locaties voor gemakkelijke toegang."
+
+LangString str_section_desktop      ${LANG_DUTCH} \
+    "Op het bureaublad"
+LangString str_desc_desktop         ${LANG_DUTCH} \
+    "Creëer pictogrammen voor Vim uitvoerbare bestanden op het bureaublad."
+
+LangString str_section_start_menu   ${LANG_DUTCH} \
+    "In de Programma's map in het start menu"
+LangString str_desc_start_menu      ${LANG_DUTCH} \
+    "Voeg Vim toe aan de programma's map in het start menu.  \
+     Van toepassing op Windows 95 en later."
+
+#LangString str_section_quick_launch ${LANG_DUTCH} \
+#    "In de snel starten balk"
+#LangString str_desc_quick_launch    ${LANG_DUTCH} \
+#    "Voeg Vim snelkoppeling toe aan de snel starten balk."
+
+LangString str_section_edit_with    ${LANG_DUTCH} \
+    "Voeg Vim contextmenu toe"
+LangString str_desc_edit_with       ${LANG_DUTCH} \
+    "Voeg Vim toe aan de $\"Openen met...$\" contextmenu lijst."
+
+#LangString str_section_edit_with32  ${LANG_DUTCH} \
+#    "32-bit versie"
+#LangString str_desc_edit_with32     ${LANG_DUTCH} \
+#    "Voeg Vim toe aan de $\"Openen met...$\" contextmenu lijst \
+#     voor 32-bit toepassingen."
+
+#LangString str_section_edit_with64  ${LANG_DUTCH} \
+#    "64-bit versie"
+#LangString str_desc_edit_with64     ${LANG_DUTCH} \
+#    "Voeg Vim toe aan de $\"Openen met...$\" contextmenu lijst \
+#     voor 64-bit toepassingen."
+
+LangString str_section_vim_rc       ${LANG_DUTCH} \
+    "Creëer standaard configuratie"
+LangString str_desc_vim_rc          ${LANG_DUTCH} \
+    "Creëer een standaard configuratie bestand (_vimrc) als er nog geen bestaat."
+
+LangString str_group_plugin         ${LANG_DUTCH} \
+    "Creëer Plugin mappen"
+LangString str_desc_plugin          ${LANG_DUTCH} \
+    "Creëer plugin mappen.  Plugin mappen maken het mogelijk om \
+     Vim uit te breiden door een bestand in een map te plaatsen."
+
+LangString str_section_plugin_home  ${LANG_DUTCH} \
+    "Privé"
+LangString str_desc_plugin_home     ${LANG_DUTCH} \
+    "Create plugin directories in HOME directory."
+
+LangString str_section_plugin_vim   ${LANG_DUTCH} \
+    "Gedeeld"
+LangString str_desc_plugin_vim      ${LANG_DUTCH} \
+    "Creëer plugin mappen in Vim installatie map, deze worden gebruikt \
+     voor iedereen op het systeem."
+
+LangString str_section_nls          ${LANG_DUTCH} \
+    "Ondersteuning voor andere talen"
+LangString str_desc_nls             ${LANG_DUTCH} \
+    "Bestanden voor ondersteuning van andere talen dan Engels installeren."
+
+LangString str_unsection_register   ${LANG_DUTCH} \
+    "Vim afmelden"
+LangString str_desc_unregister      ${LANG_DUTCH} \
+    "Registratie van Vim in het systeem ongedaan maken."
+
+LangString str_unsection_exe        ${LANG_DUTCH} \
+    "Vim uitvoerbare/runtime bestanden verwijderen"
+LangString str_desc_rm_exe          ${LANG_DUTCH} \
+    "Verwijder alle Vim uitvoerbare bestanden en runtime bestanden."
+
+LangString str_ungroup_plugin       ${LANG_DUTCH} \
+    "Remove plugin directories"
+LangString str_desc_rm_plugin       ${LANG_DUTCH} \
+    "Remove the plugin directories if they are empty."
+
+LangString str_unsection_plugin_home ${LANG_DUTCH} \
+    "Privé"
+LangString str_desc_rm_plugin_home  ${LANG_DUTCH} \
+    "Remove the plugin directories from HOME directory."
+
+LangString str_unsection_plugin_vim ${LANG_DUTCH} \
+    "Gedeeld"
+LangString str_desc_rm_plugin_vim   ${LANG_DUTCH} \
+    "Remove the plugin directories from Vim install directory."
+
+LangString str_unsection_rootdir    ${LANG_DUTCH} \
+    "Remove the Vim root directory"
+LangString str_desc_rm_rootdir      ${LANG_DUTCH} \
+    "Remove the Vim root directory. It contains your Vim configuration files!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_DUTCH} \
+#    "Er zijn $vim_old_ver_count Vim versies op je systeem gevonden.$\r$\n\
+#     Deze installatie kan omgaan met maximaal ${VIM_MAX_OLD_VER} versies.$\r$\n\
+#     Verwijder a.u.b. wat versies en probeer het dan opnieuw."
+
+#LangString str_msg_invalid_root  ${LANG_DUTCH} \
+#    "Ongeldig installatiepad: $vim_install_root!$\r$\n\
+#     Het moet eindelijk op $\"vim$\"."
+
+#LangString str_msg_bin_mismatch  ${LANG_DUTCH} \
+#    "Binair pad onjuist!$\r$\n$\r$\n\
+#     Het binaire pad zou $\"$vim_bin_path$\" moeten zijn,$\r$\n\
+#     maar het systeem geeft aan dat het binaire pad $\"$INSTDIR$\" is."
+
+#LangString str_msg_vim_running   ${LANG_DUTCH} \
+#    "Vim is nog actief op je systeem.$\r$\n\
+#     Sluit a.u.b. alle instanties van Vim voordat je verder gaat."
+
+#LangString str_msg_register_ole  ${LANG_DUTCH} \
+#    "Bezig met proberen om Vim te registreren met OLE. \
+#     Er is geen bericht dat aangeeft of deze operatie slaagt."
+
+#LangString str_msg_unreg_ole     ${LANG_DUTCH} \
+#    "Bezig met proberen om Vim te de-registreren met OLE. \
+#     Er is geen bericht dat aangeeft of deze operatie slaagt."
+
+#LangString str_msg_rm_start      ${LANG_DUTCH} \
+#    "De volgende versies worden verwijderd:"
+
+#LangString str_msg_rm_fail       ${LANG_DUTCH} \
+#    "De volgende versies konden niet worden verwijderd:"
+
+#LangString str_msg_no_rm_key     ${LANG_DUTCH} \
+#    "Kan de uninstaller register sleutel niet vinden."
+
+#LangString str_msg_no_rm_reg     ${LANG_DUTCH} \
+#    "Kan de uninstaller niet vinden via het register."
+
+#LangString str_msg_no_rm_exe     ${LANG_DUTCH} \
+#    "Kan geen toegang krijgen tot de uninstaller."
+
+#LangString str_msg_rm_copy_fail  ${LANG_DUTCH} \
+#    "Kon de uninstaller niet naar een tijdelijke map kopiëren."
+
+#LangString str_msg_rm_run_fail   ${LANG_DUTCH} \
+#    "Kon de uninstaller niet uitvoeren."
+
+#LangString str_msg_abort_install ${LANG_DUTCH} \
+#    "Installatie wordt gestopt."
+
+LangString str_msg_install_fail  ${LANG_DUTCH} \
+    "Installatie is mislukt."
+
+LangString str_msg_rm_exe_fail   ${LANG_DUTCH} \
+    "Sommige bestanden in $0 zijn niet verwijderd!$\r$\n\
+     Dit moet je handmatig doen."
+
+#LangString str_msg_rm_root_fail  ${LANG_DUTCH} \
+#    "WAARSCHUWING: Kan $\"$vim_install_root$\" niet verwijderen omdat het niet leeg is!"
+
+LangString str_msg_uninstalling  ${LANG_DUTCH} \
+    "Uninstalling the old version..."
+
+LangString str_msg_registering   ${LANG_DUTCH} \
+    "Registering..."
+
+LangString str_msg_unregistering ${LANG_DUTCH} \
+    "Unregistering..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_DUTCH} \
+    "Choose _vimrc settings"
+LangString str_vimrc_page_subtitle ${LANG_DUTCH} \
+    "Choose the settings for enhancement, keyboard and mouse."
+
+LangString str_msg_compat_title    ${LANG_DUTCH} \
+    " Vi / Vim behavior "
+LangString str_msg_compat_desc     ${LANG_DUTCH} \
+    "&Compatibility and enhancements"
+LangString str_msg_compat_vi       ${LANG_DUTCH} \
+    "Vi compatible"
+LangString str_msg_compat_vim      ${LANG_DUTCH} \
+    "Vim original"
+LangString str_msg_compat_defaults ${LANG_DUTCH} \
+    "Vim with some enhancements (load defaults.vim)"
+LangString str_msg_compat_all      ${LANG_DUTCH} \
+    "Vim with all enhancements (load vimrc_example.vim) (Default)"
+
+LangString str_msg_keymap_title   ${LANG_DUTCH} \
+    " Mappings "
+LangString str_msg_keymap_desc    ${LANG_DUTCH} \
+    "&Remap a few keys for Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+LangString str_msg_keymap_default ${LANG_DUTCH} \
+    "Do not remap keys (Default)"
+LangString str_msg_keymap_windows ${LANG_DUTCH} \
+    "Remap a few keys"
+
+LangString str_msg_mouse_title   ${LANG_DUTCH} \
+    " Mouse "
+LangString str_msg_mouse_desc    ${LANG_DUTCH} \
+    "&Behavior of right and left buttons"
+LangString str_msg_mouse_default ${LANG_DUTCH} \
+    "Right: popup menu, Left: visual mode (Default)"
+LangString str_msg_mouse_windows ${LANG_DUTCH} \
+    "Right: popup menu, Left: select mode (Windows)"
+LangString str_msg_mouse_unix    ${LANG_DUTCH} \
+    "Right: extends selection, Left: visual mode (Unix)"

nsis/lang/english.nsi

@@ -0,0 +1,288 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# english.nsi: English language strings for gvim NSIS installer.
+#
+# Locale ID    : 1033
+# Locale Name  : en
+# fileencoding : UTF-8
+# Author       : Guopeng Wen, Ken Takata
+
+!insertmacro MUI_LANGUAGE "English"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_ENGLISH} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_ENGLISH} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# License file for the license page                                       {{{1
+##############################################################################
+
+LicenseLangString page_lic_file ${LANG_ENGLISH} "..\lang\LICENSE.nsis.txt"
+
+##############################################################################
+# README.txt file, which is opened after installation                     {{{1
+##############################################################################
+
+LangString vim_readme_file ${LANG_ENGLISH} "README.txt"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_ENGLISH} \
+#    "Destination Folder (Must end with $\"vim$\")"
+
+LangString str_show_readme          ${LANG_ENGLISH} \
+    "Show README after installation finished"
+
+# Install types:
+LangString str_type_typical         ${LANG_ENGLISH} \
+    "Typical"
+
+LangString str_type_minimal         ${LANG_ENGLISH} \
+    "Minimal"
+
+LangString str_type_full            ${LANG_ENGLISH} \
+    "Full"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_ENGLISH} \
+    "Uninstall Existing Version(s)"
+LangString str_desc_old_ver         ${LANG_ENGLISH} \
+    "Uninstall existing Vim version(s) from your system."
+
+LangString str_section_exe          ${LANG_ENGLISH} \
+    "Vim GUI and runtime files"
+LangString str_desc_exe             ${LANG_ENGLISH} \
+    "Vim GUI executables and runtime files.  This component is required."
+
+LangString str_section_console      ${LANG_ENGLISH} \
+    "Vim console program"
+LangString str_desc_console         ${LANG_ENGLISH} \
+    "Console version of Vim (vim.exe)."
+
+LangString str_section_batch        ${LANG_ENGLISH} \
+    "Create .bat files"
+LangString str_desc_batch           ${LANG_ENGLISH} \
+    "Create .bat files for Vim variants in the Windows directory for \
+     command line use."
+
+LangString str_group_icons          ${LANG_ENGLISH} \
+    "Create icons for Vim"
+LangString str_desc_icons           ${LANG_ENGLISH} \
+    "Create icons for Vim at various locations to facilitate easy access."
+
+LangString str_section_desktop      ${LANG_ENGLISH} \
+    "On the Desktop"
+LangString str_desc_desktop         ${LANG_ENGLISH} \
+    "Create icons for gVim executables on the desktop."
+
+LangString str_section_start_menu   ${LANG_ENGLISH} \
+    "In the Start Menu Programs Folder"
+LangString str_desc_start_menu      ${LANG_ENGLISH} \
+    "Add Vim in the programs folder of the start menu."
+
+#LangString str_section_quick_launch ${LANG_ENGLISH} \
+#    "In the Quick Launch Bar"
+#LangString str_desc_quick_launch    ${LANG_ENGLISH} \
+#    "Add Vim shortcut in the quick launch bar."
+
+LangString str_section_edit_with    ${LANG_ENGLISH} \
+    "Add Vim Context Menu"
+LangString str_desc_edit_with       ${LANG_ENGLISH} \
+    "Add Vim to the $\"Open With...$\" context menu list."
+
+#LangString str_section_edit_with32  ${LANG_ENGLISH} \
+#    "32-bit Version"
+#LangString str_desc_edit_with32     ${LANG_ENGLISH} \
+#    "Add Vim to the $\"Open With...$\" context menu list \
+#     for 32-bit applications."
+
+#LangString str_section_edit_with64  ${LANG_ENGLISH} \
+#    "64-bit Version"
+#LangString str_desc_edit_with64     ${LANG_ENGLISH} \
+#    "Add Vim to the $\"Open With...$\" context menu list \
+#     for 64-bit applications."
+
+LangString str_section_vim_rc       ${LANG_ENGLISH} \
+    "Create Default Config"
+LangString str_desc_vim_rc          ${LANG_ENGLISH} \
+    "Create a default config file (_vimrc) if one does not already exist."
+
+LangString str_group_plugin         ${LANG_ENGLISH} \
+    "Create Plugin Directories"
+LangString str_desc_plugin          ${LANG_ENGLISH} \
+    "Create plugin directories.  Plugin directories allow extending Vim \
+     by dropping a file into a directory."
+
+LangString str_section_plugin_home  ${LANG_ENGLISH} \
+    "Private"
+LangString str_desc_plugin_home     ${LANG_ENGLISH} \
+    "Create plugin directories in HOME directory."
+
+LangString str_section_plugin_vim   ${LANG_ENGLISH} \
+    "Shared"
+LangString str_desc_plugin_vim      ${LANG_ENGLISH} \
+    "Create plugin directories in Vim install directory, it is used for \
+     everybody on the system."
+
+LangString str_section_nls          ${LANG_ENGLISH} \
+    "Native Language Support"
+LangString str_desc_nls             ${LANG_ENGLISH} \
+    "Install files for native language support."
+
+LangString str_unsection_register   ${LANG_ENGLISH} \
+    "Unregister Vim"
+LangString str_desc_unregister      ${LANG_ENGLISH} \
+    "Unregister Vim from the system."
+
+LangString str_unsection_exe        ${LANG_ENGLISH} \
+    "Remove Vim Executables/Runtime Files"
+LangString str_desc_rm_exe          ${LANG_ENGLISH} \
+    "Remove all Vim executables and runtime files."
+
+LangString str_ungroup_plugin       ${LANG_ENGLISH} \
+    "Remove plugin directories"
+LangString str_desc_rm_plugin       ${LANG_ENGLISH} \
+    "Remove the plugin directories if they are empty."
+
+LangString str_unsection_plugin_home ${LANG_ENGLISH} \
+    "Private"
+LangString str_desc_rm_plugin_home  ${LANG_ENGLISH} \
+    "Remove the plugin directories from HOME directory."
+
+LangString str_unsection_plugin_vim ${LANG_ENGLISH} \
+    "Shared"
+LangString str_desc_rm_plugin_vim   ${LANG_ENGLISH} \
+    "Remove the plugin directories from Vim install directory."
+
+LangString str_unsection_rootdir    ${LANG_ENGLISH} \
+    "Remove the Vim root directory"
+LangString str_desc_rm_rootdir      ${LANG_ENGLISH} \
+    "Remove the Vim root directory. It contains your Vim configuration files!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_ENGLISH} \
+#    "Found $vim_old_ver_count Vim versions on your system.$\r$\n\
+#     This installer can only handle ${VIM_MAX_OLD_VER} versions \
+#     at most.$\r$\n\
+#     Please remove some versions and start again."
+
+#LangString str_msg_invalid_root  ${LANG_ENGLISH} \
+#    "Invalid install path: $vim_install_root!$\r$\n\
+#     It should end with $\"vim$\"."
+
+#LangString str_msg_bin_mismatch  ${LANG_ENGLISH} \
+#    "Binary path mismatch!$\r$\n$\r$\n\
+#     Expect the binary path to be $\"$vim_bin_path$\",$\r$\n\
+#     but system indicates the binary path is $\"$INSTDIR$\"."
+
+#LangString str_msg_vim_running   ${LANG_ENGLISH} \
+#    "Vim is still running on your system.$\r$\n\
+#     Please close all instances of Vim before you continue."
+
+#LangString str_msg_register_ole  ${LANG_ENGLISH} \
+#    "Attempting to register Vim with OLE. \
+#     There is no message indicates whether this works or not."
+
+#LangString str_msg_unreg_ole     ${LANG_ENGLISH} \
+#    "Attempting to unregister Vim with OLE. \
+#     There is no message indicates whether this works or not."
+
+#LangString str_msg_rm_start      ${LANG_ENGLISH} \
+#    "Uninstalling the following version:"
+
+#LangString str_msg_rm_fail       ${LANG_ENGLISH} \
+#    "Fail to uninstall the following version:"
+
+#LangString str_msg_no_rm_key     ${LANG_ENGLISH} \
+#    "Cannot find uninstaller registry key."
+
+#LangString str_msg_no_rm_reg     ${LANG_ENGLISH} \
+#    "Cannot find uninstaller from registry."
+
+#LangString str_msg_no_rm_exe     ${LANG_ENGLISH} \
+#    "Cannot access uninstaller."
+
+#LangString str_msg_rm_copy_fail  ${LANG_ENGLISH} \
+#    "Fail to copy uninstaller to temporary directory."
+
+#LangString str_msg_rm_run_fail   ${LANG_ENGLISH} \
+#    "Fail to run uninstaller."
+
+#LangString str_msg_abort_install ${LANG_ENGLISH} \
+#    "Installer will abort."
+
+LangString str_msg_install_fail  ${LANG_ENGLISH} \
+    "Installation failed. Better luck next time."
+
+LangString str_msg_rm_exe_fail   ${LANG_ENGLISH} \
+    "Some files in $0 have not been deleted!$\r$\n\
+     You must do it manually."
+
+#LangString str_msg_rm_root_fail  ${LANG_ENGLISH} \
+#    "WARNING: Cannot remove $\"$vim_install_root$\", it is not empty!"
+
+LangString str_msg_uninstalling  ${LANG_ENGLISH} \
+    "Uninstalling the old version..."
+
+LangString str_msg_registering   ${LANG_ENGLISH} \
+    "Registering..."
+
+LangString str_msg_unregistering ${LANG_ENGLISH} \
+    "Unregistering..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_ENGLISH} \
+    "Choose _vimrc settings"
+LangString str_vimrc_page_subtitle ${LANG_ENGLISH} \
+    "Choose the settings for enhancement, keyboard and mouse."
+
+LangString str_msg_compat_title    ${LANG_ENGLISH} \
+    " Vi / Vim behavior "
+LangString str_msg_compat_desc     ${LANG_ENGLISH} \
+    "&Compatibility and enhancements"
+LangString str_msg_compat_vi       ${LANG_ENGLISH} \
+    "Vi compatible"
+LangString str_msg_compat_vim      ${LANG_ENGLISH} \
+    "Vim original"
+LangString str_msg_compat_defaults ${LANG_ENGLISH} \
+    "Vim with some enhancements (load defaults.vim)"
+LangString str_msg_compat_all      ${LANG_ENGLISH} \
+    "Vim with all enhancements (load vimrc_example.vim) (Default)"
+
+LangString str_msg_keymap_title   ${LANG_ENGLISH} \
+    " Mappings "
+LangString str_msg_keymap_desc    ${LANG_ENGLISH} \
+    "&Remap a few keys for Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+LangString str_msg_keymap_default ${LANG_ENGLISH} \
+    "Do not remap keys (Default)"
+LangString str_msg_keymap_windows ${LANG_ENGLISH} \
+    "Remap a few keys"
+
+LangString str_msg_mouse_title   ${LANG_ENGLISH} \
+    " Mouse "
+LangString str_msg_mouse_desc    ${LANG_ENGLISH} \
+    "&Behavior of right and left buttons"
+LangString str_msg_mouse_default ${LANG_ENGLISH} \
+    "Right: popup menu, Left: visual mode (Default)"
+LangString str_msg_mouse_windows ${LANG_ENGLISH} \
+    "Right: popup menu, Left: select mode (Windows)"
+LangString str_msg_mouse_unix    ${LANG_ENGLISH} \
+    "Right: extends selection, Left: visual mode (Unix)"

nsis/lang/german.nsi

@@ -0,0 +1,290 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# german.nsi : German language strings for gvim NSIS installer.
+#
+# Locale ID    : 1031
+# Locale Name  : de
+# fileencoding : UTF-8
+# Author       : Christian Brabandt, tux
+
+!insertmacro MUI_LANGUAGE "German"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_GERMAN} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_GERMAN} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# Translated license file for the license page                            {{{1
+##############################################################################
+
+LicenseLangString page_lic_file 0 "..\lang\LICENSE.nsis.txt"
+#LicenseLangString page_lic_file ${LANG_GERMAN} "..\lang\LICENSE.de.nsis.txt"
+
+##############################################################################
+# Translated README.txt file, which is opened after installation          {{{1
+##############################################################################
+
+LangString vim_readme_file 0 "README.txt"
+#LangString vim_readme_file ${LANG_GERMAN} "README.de.txt"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_GERMAN} \
+#    "Zielverzeichnis auswählen (muss auf $\"vim$\" enden)"
+
+LangString str_show_readme          ${LANG_GERMAN} \
+    "README-Datei nach der Installation anzeigen"
+
+# Install types:
+LangString str_type_typical         ${LANG_GERMAN} \
+    "Typisch"
+
+LangString str_type_minimal         ${LANG_GERMAN} \
+    "Minimal"
+
+LangString str_type_full            ${LANG_GERMAN} \
+    "Vollständig"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_GERMAN} \
+    "Vorherige Version deinstallieren"
+LangString str_desc_old_ver         ${LANG_GERMAN} \
+    "Vorherige installierte Versionen auf diesem System deinstallieren."
+
+LangString str_section_exe          ${LANG_GERMAN} \
+    "Vim GUI"
+LangString str_desc_exe             ${LANG_GERMAN} \
+    "Vim (Anwendung) und Laufzeitdateien (Dieser Teil ist zwingend \
+     erforderlich)."
+
+LangString str_section_console      ${LANG_GERMAN} \
+    "Vim Konsolenanwendung"
+LangString str_desc_console         ${LANG_GERMAN} \
+    "Konsolenversion von Vim."
+
+LangString str_section_batch        ${LANG_GERMAN} \
+    ".bat-Dateien erstellen"
+LangString str_desc_batch           ${LANG_GERMAN} \
+    ".bat-Dateien erstellen, um Vim in der Konsole auszuführen."
+
+LangString str_group_icons          ${LANG_GERMAN} \
+    "Vim-Verknüpfungen erstellen"
+LangString str_desc_icons           ${LANG_GERMAN} \
+    "Verknüpfungen mit Vim für einfachen Aufruf erstellen."
+
+LangString str_section_desktop      ${LANG_GERMAN} \
+    "Auf dem Desktop"
+LangString str_desc_desktop         ${LANG_GERMAN} \
+    "Icons für GVim auf dem Desktop erstellen."
+
+LangString str_section_start_menu   ${LANG_GERMAN} \
+    "Im Startmenü"
+LangString str_desc_start_menu      ${LANG_GERMAN} \
+    "Vim im Programmverzeichnis des Startmenüs hinzufügen."
+
+#LangString str_section_quick_launch ${LANG_GERMAN} \
+#    "In der Schnellstartleiste"
+#LangString str_desc_quick_launch    ${LANG_GERMAN} \
+#    "Verknüpfung zu Vim in der Schnellstartleiste ablegen."
+
+LangString str_section_edit_with    ${LANG_GERMAN} \
+    "Vim zum Kontextmenü hinzufügen"
+LangString str_desc_edit_with       ${LANG_GERMAN} \
+    "Vim in das $\"Öffnen mit...$\"-Kontextmenü einfügen."
+
+#LangString str_section_edit_with32  ${LANG_GERMAN} \
+#    "32-Bit-Version"
+#LangString str_desc_edit_with32     ${LANG_GERMAN} \
+#    "Vim in das $\"Öffnen mit...$\"-Kontextmenü \
+#     für 32-Bit-Anwendungen integrieren."
+
+#LangString str_section_edit_with64  ${LANG_GERMAN} \
+#    "64-Bit-Version"
+#LangString str_desc_edit_with64     ${LANG_GERMAN} \
+#    "Vim in das $\"Öffnen mit...$\"-Kontextmenü \
+#     für 64-Bit-Anwendungen integrieren."
+
+LangString str_section_vim_rc       ${LANG_GERMAN} \
+    "Standard-Konfigurationsdatei erstellen"
+LangString str_desc_vim_rc          ${LANG_GERMAN} \
+    "Eine Standard-Konfigurationsdatei (_vimrc) erstellen, \
+     falls noch keine existiert."
+
+LangString str_group_plugin         ${LANG_GERMAN} \
+    "Plugin-Verzeichnisse anlegen"
+LangString str_desc_plugin          ${LANG_GERMAN} \
+    "Plugin-Verzeichnisse anlegen. Plugins erlauben es, Vim \
+     um zusätzliche Funktionen zu erweitern."
+
+LangString str_section_plugin_home  ${LANG_GERMAN} \
+    "Privat"
+LangString str_desc_plugin_home     ${LANG_GERMAN} \
+    "Erstelle Plugin-Verzeichnis im HOME Benutzerverzeichnis."
+
+LangString str_section_plugin_vim   ${LANG_GERMAN} \
+    "Freigegeben"
+LangString str_desc_plugin_vim      ${LANG_GERMAN} \
+    "Plugin-Verzeichnisse im Vim-Installationsverzeichnis erstellen. Diese werden \
+     für alle Benutzer dieses Systems genutzt."
+
+LangString str_section_nls          ${LANG_GERMAN} \
+    "Unterstützung für andere Sprachen"
+LangString str_desc_nls             ${LANG_GERMAN} \
+    "Dateien zur Unterstützung anderer Sprachen als Englisch installieren."
+
+LangString str_unsection_register   ${LANG_GERMAN} \
+    "Vim deinstallieren"
+LangString str_desc_unregister      ${LANG_GERMAN} \
+    "Vim vom System entfernen."
+
+LangString str_unsection_exe        ${LANG_GERMAN} \
+    "Vim-Anwendung und Laufzeitdateien entfernen"
+LangString str_desc_rm_exe          ${LANG_GERMAN} \
+    "Alle Vim-Anwendungen und Laufzeitdateien von diesem System entfernen."
+
+LangString str_ungroup_plugin       ${LANG_GERMAN} \
+    "Entferne Plugin-Verzeichnisse"
+LangString str_desc_rm_plugin       ${LANG_GERMAN} \
+    "Entferne Plugin-Verzeichnisse, falls sie leer sind."
+
+LangString str_unsection_plugin_home ${LANG_GERMAN} \
+    "Privat"
+LangString str_desc_rm_plugin_home  ${LANG_GERMAN} \
+    "Entfernt die Plugin-Verzeichnisse aus dem HOME Benutzerverzeichnis."
+
+LangString str_unsection_plugin_vim ${LANG_GERMAN} \
+    "Freigegeben"
+LangString str_desc_rm_plugin_vim   ${LANG_GERMAN} \
+    "Entfernt das Plugin-Verzeichnis aus dem Vim-Installationsverzeichnis."
+
+LangString str_unsection_rootdir    ${LANG_GERMAN} \
+    "Entferne Vim Installationsverzeichnis"
+LangString str_desc_rm_rootdir      ${LANG_GERMAN} \
+    "Entfernt das Vim Installationsverzeichnis. Es enthält die Vim Konfigurationsdateien!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_GERMAN} \
+#    "$vim_old_ver_count Vim-Versionen auf diesem System gefunden..$\r$\n\
+#     Dieser Installer kann maximal ${VIM_MAX_OLD_VER} Versionen \
+#     handhaben.$\r$\n\
+#     Bitte alte Versionen entfernen und noch einmal probieren."
+
+#LangString str_msg_invalid_root  ${LANG_GERMAN} \
+#    "Nicht gültiges Installationsverzeichnis: $vim_install_root!$\r$\n\
+#     Der Pfad muss auf $\"vim$\" enden."
+
+#LangString str_msg_bin_mismatch  ${LANG_GERMAN} \
+#    "Pfaddiskrepanz!$\r$\n$\r$\n\
+#     Erwarte Anwendungsverzeichnis $\"$vim_bin_path$\",$\r$\n\
+#     aber fand Anwendungspfad $\"$INSTDIR$\" vor."
+
+#LangString str_msg_vim_running   ${LANG_GERMAN} \
+#    "Laufender Vim-Prozess erkannt.$\r$\n\
+#     Bitte alle laufenden Vim-Prozesse vor dem Fortfahren beenden."
+
+#LangString str_msg_register_ole  ${LANG_GERMAN} \
+#    "Versuche OLE-Registrierung durchzuführen."
+
+#LangString str_msg_unreg_ole     ${LANG_GERMAN} \
+#    "Versuche OLE-Registrierung zu löschen."
+
+#LangString str_msg_rm_start      ${LANG_GERMAN} \
+#    "Deinstalliere die folgende Version:"
+
+#LangString str_msg_rm_fail       ${LANG_GERMAN} \
+#    "Deinstallation der Version fehlgeschlagen:"
+
+#LangString str_msg_no_rm_key     ${LANG_GERMAN} \
+#    "Deinstallationsschlüssel in der Registrierungsdatenbank nicht gefunden."
+
+#LangString str_msg_no_rm_reg     ${LANG_GERMAN} \
+#    "Kein Uninstaller in der Registrierungsdatenbank gefunden."
+
+#LangString str_msg_no_rm_exe     ${LANG_GERMAN} \
+#    "Kein Zugriff auf den Uninstaller."
+
+#LangString str_msg_rm_copy_fail  ${LANG_GERMAN} \
+#    "Fehler beim Kopieren des Uninstallers in ein temporäres Verzeichnis."
+
+#LangString str_msg_rm_run_fail   ${LANG_GERMAN} \
+#    "Fehler beim Aufruf des Uninstallers."
+
+#LangString str_msg_abort_install ${LANG_GERMAN} \
+#    "Installation wird abgebrochen."
+
+LangString str_msg_install_fail  ${LANG_GERMAN} \
+    "Installation fehlerhaft beendet."
+
+LangString str_msg_rm_exe_fail   ${LANG_GERMAN} \
+    "Einige Dateien im Pfad $0 konnten nicht gelöscht werden!$\r$\n\
+     Diese Dateien müssen manuell gelöscht werden."
+
+#LangString str_msg_rm_root_fail  ${LANG_GERMAN} \
+#    "Achtung: Kann Verzeichnis $\"$vim_install_root$\" nicht entfernen, \
+#     weil es nicht leer ist!"
+
+LangString str_msg_uninstalling  ${LANG_GERMAN} \
+    "Deinstalliere alte Version..."
+
+LangString str_msg_registering   ${LANG_GERMAN} \
+    "Registriere..."
+
+LangString str_msg_unregistering ${LANG_GERMAN} \
+    "Entferne Registrierung..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_GERMAN} \
+    "Wähle _vimrc Konfigurationsoptionen"
+LangString str_vimrc_page_subtitle ${LANG_GERMAN} \
+    "Wähle Einstellungen zur Kompatibilität, Tastatur und Maus."
+
+LangString str_msg_compat_title    ${LANG_GERMAN} \
+    " Vi / Vim Verhalten "
+LangString str_msg_compat_desc     ${LANG_GERMAN} \
+    "&Kompatibilität und Erweiterungen"
+LangString str_msg_compat_vi       ${LANG_GERMAN} \
+    "Vi-kompatibel"
+LangString str_msg_compat_vim      ${LANG_GERMAN} \
+    "Vim Original"
+LangString str_msg_compat_defaults ${LANG_GERMAN} \
+    "Vim mit einigen Erweiterungen (Lädt defaults.vim)"
+LangString str_msg_compat_all      ${LANG_GERMAN} \
+    "Vim mit allen Erweiterungen (Lädt vimrc_example.vim) (Standard)"
+
+LangString str_msg_keymap_title   ${LANG_GERMAN} \
+    " Mappings für Windows Standard Tastenkombinationen "
+LangString str_msg_keymap_desc    ${LANG_GERMAN} \
+    "&Einige Tasten umkonfigurieren (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+LangString str_msg_keymap_default ${LANG_GERMAN} \
+    "Keine Tasten umkonfigurieren (Standard)"
+LangString str_msg_keymap_windows ${LANG_GERMAN} \
+    "Einige Tasten umkonfigurieren"
+
+LangString str_msg_mouse_title   ${LANG_GERMAN} \
+    " Maus "
+LangString str_msg_mouse_desc    ${LANG_GERMAN} \
+    "&Verhalten der linken und rechten Buttons"
+LangString str_msg_mouse_default ${LANG_GERMAN} \
+    "Rechts: Popup Menü, Links: Visueller Modus (Standard)"
+LangString str_msg_mouse_windows ${LANG_GERMAN} \
+    "Rechts: Popup Menü, Links: Auswahl Modus (Windows)"
+LangString str_msg_mouse_unix    ${LANG_GERMAN} \
+    "Rechts: Auswahl erweitern, Links: Visueller Modus (Unix)"

nsis/lang/greek.nsi

@@ -0,0 +1,291 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# greek.nsi: Greek language strings for gvim NSIS installer.
+#
+# Locale ID    : 1032
+# Locale Name  : el
+# fileencoding : UTF-8
+# Author       : Christos Longros
+
+!insertmacro MUI_LANGUAGE "Greek"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_GREEK} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_GREEK} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# Translated license file for the license page                            {{{1
+##############################################################################
+
+LicenseLangString page_lic_file 0 "..\lang\LICENSE.nsis.txt"
+#LicenseLangString page_lic_file ${LANG_GREEK} "..\lang\LICENSE.el.nsis.txt"
+
+##############################################################################
+# Translated README.txt file, which is opened after installation          {{{1
+##############################################################################
+
+LangString vim_readme_file 0 "README.txt"
+#LangString vim_readme_file ${LANG_GREEK} "README.el.txt"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_GREEK} \
+#    "Φάκελος προορισμός (Πρέπει να τελειώνει σε $\"vim$\")"
+
+LangString str_show_readme          ${LANG_GREEK} \
+    "Εμφάνιση README μετά την ολοκλήρωση της εγκατάστασης"
+
+# Install types:
+LangString str_type_typical         ${LANG_GREEK} \
+    "Typical"
+
+LangString str_type_minimal         ${LANG_GREEK} \
+    "Minimal"
+
+LangString str_type_full            ${LANG_GREEK} \
+    "Full"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_GREEK} \
+    "Απεγκατάσταση υπάρχουσων εκδόσεων"
+LangString str_desc_old_ver         ${LANG_GREEK} \
+    "Απεγκατάσταση υπάρχουσων εκδόσεων Vim από το σύστημά σας."
+
+LangString str_section_exe          ${LANG_GREEK} \
+    "Vim GUI and runtime files"
+LangString str_desc_exe             ${LANG_GREEK} \
+    "Vim GUI executables and runtime files.  This component is required."
+
+LangString str_section_console      ${LANG_GREEK} \
+    "Vim console program"
+LangString str_desc_console         ${LANG_GREEK} \
+    "Console version of Vim (vim.exe)."
+
+LangString str_section_batch        ${LANG_GREEK} \
+    "Δημιουργία αρχείων .bat"
+LangString str_desc_batch           ${LANG_GREEK} \
+    "Δημιουργία αρχείων .bat από παράγωγα Vim στον κατάλογο των Windows για \
+     χρήση γραμμής εντολών."
+
+LangString str_group_icons          ${LANG_GREEK} \
+    "Δημιουργία  εικονιδίων Vim"
+LangString str_desc_icons           ${LANG_GREEK} \
+    "Δημιουργία εικονιδίων για τον Vim σε διάφορες τοποθεσίες για την διευκόλυνση της προσβασιμότητας."
+
+LangString str_section_desktop      ${LANG_GREEK} \
+    "Στην επιφάνεια εργασίας"
+LangString str_desc_desktop         ${LANG_GREEK} \
+    "Δημιουργία εικονιδίων για gVim εκτελέσιμα στην επιφάνεια εργασίας."
+
+LangString str_section_start_menu   ${LANG_GREEK} \
+    "In the Start Menu Programs Folder"
+LangString str_desc_start_menu      ${LANG_GREEK} \
+    "Προσθήκη του Vim στον φάκελο προγραμμάτων του μενού εκκίνησης."
+
+#LangString str_section_quick_launch ${LANG_GREEK} \
+#    "In the Quick Launch Bar"
+#LangString str_desc_quick_launch    ${LANG_GREEK} \
+#    "Add Vim shortcut in the quick launch bar."
+
+LangString str_section_edit_with    ${LANG_GREEK} \
+    "Add Vim Context Menu"
+LangString str_desc_edit_with       ${LANG_GREEK} \
+    "Add Vim to the $\"Open With...$\" context menu list."
+
+#LangString str_section_edit_with32  ${LANG_GREEK} \
+#    "32-bit Version"
+#LangString str_desc_edit_with32     ${LANG_GREEK} \
+#    "Add Vim to the $\"Open With...$\" context menu list \
+#     for 32-bit applications."
+
+#LangString str_section_edit_with64  ${LANG_GREEK} \
+#    "64-bit Version"
+#LangString str_desc_edit_with64     ${LANG_GREEK} \
+#    "Add Vim to the $\"Open With...$\" context menu list \
+#     for 64-bit applications."
+
+LangString str_section_vim_rc       ${LANG_GREEK} \
+    "Δημιουργία προεπιλεγμένων ρυθμίσεων"
+LangString str_desc_vim_rc          ${LANG_GREEK} \
+    "Δημιουργία προεπιλεγμένου αρχείου ρυθμίσεων (_vimrc) αν δεν υπάρχει ήδη."
+
+LangString str_group_plugin         ${LANG_GREEK} \
+    "Δημιουργία καταλόγων Plugin"
+LangString str_desc_plugin          ${LANG_GREEK} \
+    "Δημιουργία καταλόγων plugin.  Οι κατάλογοι Plugin επιτρέπουν την επέκταση του Vim \
+     με την μεταφορά ενός αρχείου σε έναν κατάλογο."
+
+LangString str_section_plugin_home  ${LANG_GREEK} \
+    "Private"
+LangString str_desc_plugin_home     ${LANG_GREEK} \
+    "Δημιουργία καταλόγων plugin στον κατάλογο HOME."
+
+LangString str_section_plugin_vim   ${LANG_GREEK} \
+    "Shared"
+LangString str_desc_plugin_vim      ${LANG_GREEK} \
+    "Δημιουργία καταλόγων plugin στον κατάλογο εγκατάστασης του Vim, χρησιμοποιείται από \
+     όλους στο σύστημα."
+
+LangString str_section_nls          ${LANG_GREEK} \
+    "Native Language Support"
+LangString str_desc_nls             ${LANG_GREEK} \
+    "Install files for native language support."
+
+LangString str_unsection_register   ${LANG_GREEK} \
+    "Unregister Vim"
+LangString str_desc_unregister      ${LANG_GREEK} \
+    "Unregister Vim from the system."
+
+LangString str_unsection_exe        ${LANG_GREEK} \
+    "Remove Vim Executables/Runtime Files"
+LangString str_desc_rm_exe          ${LANG_GREEK} \
+    "Remove all Vim executables and runtime files."
+
+LangString str_ungroup_plugin       ${LANG_GREEK} \
+    "Remove plugin directories"
+LangString str_desc_rm_plugin       ${LANG_GREEK} \
+    "Remove the plugin directories if they are empty."
+
+LangString str_unsection_plugin_home ${LANG_GREEK} \
+    "Private"
+LangString str_desc_rm_plugin_home  ${LANG_GREEK} \
+    "Remove the plugin directories from HOME directory."
+
+LangString str_unsection_plugin_vim ${LANG_GREEK} \
+    "Shared"
+LangString str_desc_rm_plugin_vim   ${LANG_GREEK} \
+    "Remove the plugin directories from Vim install directory."
+
+LangString str_unsection_rootdir    ${LANG_GREEK} \
+    "Remove the Vim root directory"
+LangString str_desc_rm_rootdir      ${LANG_GREEK} \
+    "Remove the Vim root directory. It contains your Vim configuration files!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_GREEK} \
+#    "Found $vim_old_ver_count Vim versions on your system.$\r$\n\
+#     This installer can only handle ${VIM_MAX_OLD_VER} versions \
+#     at most.$\r$\n\
+#     Please remove some versions and start again."
+
+#LangString str_msg_invalid_root  ${LANG_GREEK} \
+#    "Invalid install path: $vim_install_root!$\r$\n\
+#     It should end with $\"vim$\"."
+
+#LangString str_msg_bin_mismatch  ${LANG_GREEK} \
+#    "Binary path mismatch!$\r$\n$\r$\n\
+#     Expect the binary path to be $\"$vim_bin_path$\",$\r$\n\
+#     but system indicates the binary path is $\"$INSTDIR$\"."
+
+#LangString str_msg_vim_running   ${LANG_GREEK} \
+#    "Vim is still running on your system.$\r$\n\
+#     Please close all instances of Vim before you continue."
+
+#LangString str_msg_register_ole  ${LANG_GREEK} \
+#    "Attempting to register Vim with OLE. \
+#     There is no message indicates whether this works or not."
+
+#LangString str_msg_unreg_ole     ${LANG_GREEK} \
+#    "Attempting to unregister Vim with OLE. \
+#     There is no message indicates whether this works or not."
+
+#LangString str_msg_rm_start      ${LANG_GREEK} \
+#    "Uninstalling the following version:"
+
+#LangString str_msg_rm_fail       ${LANG_GREEK} \
+#    "Fail to uninstall the following version:"
+
+#LangString str_msg_no_rm_key     ${LANG_GREEK} \
+#    "Cannot find uninstaller registry key."
+
+#LangString str_msg_no_rm_reg     ${LANG_GREEK} \
+#    "Cannot find uninstaller from registry."
+
+#LangString str_msg_no_rm_exe     ${LANG_GREEK} \
+#    "Cannot access uninstaller."
+
+#LangString str_msg_rm_copy_fail  ${LANG_GREEK} \
+#    "Fail to copy uninstaller to temporary directory."
+
+#LangString str_msg_rm_run_fail   ${LANG_GREEK} \
+#    "Αποτυχία εκτέλεσης της λειτουργίας απεγκατάστασης."
+
+#LangString str_msg_abort_install ${LANG_GREEK} \
+#    "Installer will abort."
+
+LangString str_msg_install_fail  ${LANG_GREEK} \
+    "Η εγκατάσταση απέτυχε. Better luck next time."
+
+LangString str_msg_rm_exe_fail   ${LANG_GREEK} \
+    "Μερικά αρχεία στο $0 δεν έχουν διαγραφεί!$\r$\n\
+     Πρέπει να το κάνετε χειροκίνητα."
+
+#LangString str_msg_rm_root_fail  ${LANG_GREEK} \
+#    "ΠΡΟΕΙΔΟΠΟΙΗΣΗ: Αδύνατη η αφαίρεση $\"$vim_install_root$\", δεν είναι κενό!"
+
+LangString str_msg_uninstalling  ${LANG_GREEK} \
+    "Απεγκατάσταση παλιάς έκδοσης the old version..."
+
+LangString str_msg_registering   ${LANG_GREEK} \
+    "Καταχώρηση..."
+
+LangString str_msg_unregistering ${LANG_GREEK} \
+    "Unregistering..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_GREEK} \
+    "Επιλογή ρυθμίσεων _vimrc"
+LangString str_vimrc_page_subtitle ${LANG_GREEK} \
+    "Choose the settings for enhancement, keyboard and mouse."
+
+LangString str_msg_compat_title    ${LANG_GREEK} \
+    " Συμπεριφορά Vi / Vim  "
+LangString str_msg_compat_desc     ${LANG_GREEK} \
+    "&Compatibility and enhancements"
+LangString str_msg_compat_vi       ${LANG_GREEK} \
+    "Vi compatible"
+LangString str_msg_compat_vim      ${LANG_GREEK} \
+    "Vim original"
+LangString str_msg_compat_defaults ${LANG_GREEK} \
+    "Vim with some enhancements (load defaults.vim)"
+LangString str_msg_compat_all      ${LANG_GREEK} \
+    "Vim with all enhancements (load vimrc_example.vim) (Default)"
+
+LangString str_msg_keymap_title   ${LANG_GREEK} \
+    " Mappings "
+LangString str_msg_keymap_desc    ${LANG_GREEK} \
+    "&Remap a few keys for Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+LangString str_msg_keymap_default ${LANG_GREEK} \
+    "Do not remap keys (Default)"
+LangString str_msg_keymap_windows ${LANG_GREEK} \
+    "Remap a few keys"
+
+LangString str_msg_mouse_title   ${LANG_GREEK} \
+    " Ποντίκι "
+LangString str_msg_mouse_desc    ${LANG_GREEK} \
+    "&Behavior of right and left buttons"
+LangString str_msg_mouse_default ${LANG_GREEK} \
+    "Right: popup menu, Left: visual mode (Default)"
+LangString str_msg_mouse_windows ${LANG_GREEK} \
+    "Right: popup menu, Left: select mode (Windows)"
+LangString str_msg_mouse_unix    ${LANG_GREEK} \
+    "Right: extends selection, Left: visual mode (Unix)"
+

nsis/lang/italian.nsi

@@ -0,0 +1,288 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# italian.nsi : Italian language strings for gvim NSIS installer.
+#
+# Locale ID    : 1040
+# Locale Name  : it
+# fileencoding : UTF-8
+# Author       : Antonio Colombo, bovirus - revision: 12.05.2023
+
+!insertmacro MUI_LANGUAGE "Italian"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_ITALIAN} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_ITALIAN} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# Translated license file for the license page                            {{{1
+##############################################################################
+
+LicenseLangString page_lic_file ${LANG_ITALIAN} "..\lang\LICENSE.it.nsis.txt"
+
+##############################################################################
+# Translated README.txt file, which is opened after installation          {{{1
+##############################################################################
+
+LangString vim_readme_file ${LANG_ITALIAN} "README.it.txt"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_ITALIAN} \
+#    "Cartella installazione (il percorso deve finire con $\"vim$\")"
+
+LangString str_show_readme          ${LANG_ITALIAN} \
+    "Visualizza file README a fine installazione"
+
+# Install types:
+LangString str_type_typical         ${LANG_ITALIAN} \
+    "Tipica"
+
+LangString str_type_minimal         ${LANG_ITALIAN} \
+    "Minima"
+
+LangString str_type_full            ${LANG_ITALIAN} \
+    "Completa"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_ITALIAN} \
+    "Disinstalla versioni esistenti"
+LangString str_desc_old_ver         ${LANG_ITALIAN} \
+    "Disinstalla versioni esistenti di Vim."
+
+LangString str_section_exe          ${LANG_ITALIAN} \
+    "GUI e file supporto Vim"
+LangString str_desc_exe             ${LANG_ITALIAN} \
+    "GUI programmi e file di supporto Vim.  Questa componente è indispensabile."
+
+LangString str_section_console      ${LANG_ITALIAN} \
+    "Console Vim (vim.exe per MS-DOS)"
+LangString str_desc_console         ${LANG_ITALIAN} \
+    "Versione console di Vim (vim.exe)."
+
+LangString str_section_batch        ${LANG_ITALIAN} \
+    "Crea file .bat"
+LangString str_desc_batch           ${LANG_ITALIAN} \
+    "Crea file .bat per varianti di Vim nella cartella \
+     di Windows, per utilizzo da riga di comando."
+
+LangString str_group_icons          ${LANG_ITALIAN} \
+    "Crea icone Vim"
+LangString str_desc_icons           ${LANG_ITALIAN} \
+    "Crea icone Vim per rendere facile l'accesso."
+
+LangString str_section_desktop      ${LANG_ITALIAN} \
+    "Icone sul Desktop"
+LangString str_desc_desktop         ${LANG_ITALIAN} \
+    "Crea icone programma gVim sul desktop."
+
+LangString str_section_start_menu   ${LANG_ITALIAN} \
+    "Gruppo programmi menù START"
+LangString str_desc_start_menu      ${LANG_ITALIAN} \
+    "Aggiunge gruppo programmi al menù START."
+
+#LangString str_section_quick_launch ${LANG_ITALIAN} \
+#    "Barra avvio veloce"
+#LangString str_desc_quick_launch    ${LANG_ITALIAN} \
+#    "Aggiunge un collegamento a Vim nella barra di avvio veloce."
+
+LangString str_section_edit_with    ${LANG_ITALIAN} \
+    "Aggiungi Vim al menù contestuale"
+LangString str_desc_edit_with       ${LANG_ITALIAN} \
+    "Aggiunge Vim al menu contestuale $\"Apri con...$\"."
+
+#LangString str_section_edit_with32  ${LANG_ITALIAN} \
+#    "Versione a 32 bit"
+#LangString str_desc_edit_with32     ${LANG_ITALIAN} \
+#    "Aggiungi Vim al menu contestuale $\"Apri con...$\" \
+#     per applicazioni a 32 bit."
+
+#LangString str_section_edit_with64  ${LANG_ITALIAN} \
+#    "Versione a 64 bit"
+#LangString str_desc_edit_with64     ${LANG_ITALIAN} \
+#    "Aggiunge Vim al menu contestuale $\"Apri con...$\" \
+#     per applicazioni a 64 bit."
+
+LangString str_section_vim_rc       ${LANG_ITALIAN} \
+    "Crea configurazione predefinita"
+LangString str_desc_vim_rc          ${LANG_ITALIAN} \
+    "Crea, se non ne esiste già uno, un file configurazione predefinito (_vimrc) ."
+
+LangString str_group_plugin         ${LANG_ITALIAN} \
+    "Crea cartella plugin"
+LangString str_desc_plugin          ${LANG_ITALIAN} \
+    "Crea cartella plugin.  I plugin consentono di aggiungere funzionalità \
+     a Vim copiando i relativi file in una di queste cartelle."
+
+LangString str_section_plugin_home  ${LANG_ITALIAN} \
+    "Privata"
+LangString str_desc_plugin_home     ${LANG_ITALIAN} \
+    "Crea cartella plugin nella cartella HOME."
+
+LangString str_section_plugin_vim   ${LANG_ITALIAN} \
+    "Condivisa"
+LangString str_desc_plugin_vim      ${LANG_ITALIAN} \
+    "Crea cartella plugin nella cartella di installazione di Vim \
+     per uso da parte di tutti gli utenti di questo sistema."
+
+LangString str_section_nls          ${LANG_ITALIAN} \
+    "Supporto nativo lingua (NLS)"
+LangString str_desc_nls             ${LANG_ITALIAN} \
+    "Installa i file per il supporto nativo multilingua."
+
+LangString str_unsection_register   ${LANG_ITALIAN} \
+    "Rimuovi Vim dal registro"
+LangString str_desc_unregister      ${LANG_ITALIAN} \
+    "Rimuove Vim dal registro di configurazione sistema."
+
+LangString str_unsection_exe        ${LANG_ITALIAN} \
+    "Elimina programmi/file di supporto Vim"
+LangString str_desc_rm_exe          ${LANG_ITALIAN} \
+    "Elimina tutti i programmi/file di supporto di Vim."
+
+LangString str_ungroup_plugin       ${LANG_ITALIAN} \
+    "Elimina cartelle plugin"
+LangString str_desc_rm_plugin       ${LANG_ITALIAN} \
+    "Elimina le cartelle plugin se sono vuote."
+
+LangString str_unsection_plugin_home ${LANG_ITALIAN} \
+    "Private"
+LangString str_desc_rm_plugin_home  ${LANG_ITALIAN} \
+    "Elimina cartelle plugin nella cartella HOME."
+
+LangString str_unsection_plugin_vim ${LANG_ITALIAN} \
+    "Condivise"
+LangString str_desc_rm_plugin_vim   ${LANG_ITALIAN} \
+    "Elimina cartelle plugin nella cartella di installazione di Vim."
+
+LangString str_unsection_rootdir    ${LANG_ITALIAN} \
+    "Elimina la cartella di installazione di Vim"
+LangString str_desc_rm_rootdir      ${LANG_ITALIAN} \
+    "Elimina la cartella di installazione di Vim. Contiene i file di configurazione!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_ITALIAN} \
+#    "Rilevate nel sistema $vim_old_ver_count versioni di Vim.$\r$\n\
+#     Questo programma di installazione può gestire solo \
+#     ${VIM_MAX_OLD_VER} versioni.$\r$\n\
+#     Disinstalla qualche versione precedente e ricomincia."
+
+#LangString str_msg_invalid_root  ${LANG_ITALIAN} \
+#    "Nome cartella di installazione non valida: $vim_install_root!$\r$\n\
+#     Dovrebbe terminare con $\"vim$\"."
+
+#LangString str_msg_bin_mismatch  ${LANG_ITALIAN} \
+#    "Conflitto nella cartella di installazione!$\r$\n$\r$\n\
+#     La cartella di installazione dev'essere $\"$vim_bin_path$\",$\r$\n\
+#     ma il sistema indica che il percorso è $\"$INSTDIR$\"."
+
+#LangString str_msg_vim_running   ${LANG_ITALIAN} \
+#    "Vim è ancora in esecuzione nel sistema.$\r$\n\
+#     Per continuare chiudi tutte le sessioni attive di Vim."
+
+#LangString str_msg_register_ole  ${LANG_ITALIAN} \
+#    "Tentativo di registrazione di Vim con OLE. \
+#     Non ci sono messaggi che indicano se l'operazione è riuscita."
+
+#LangString str_msg_unreg_ole     ${LANG_ITALIAN} \
+#    "Tentativo di rimozione di VIM dal registro via OLE. \
+#     Non ci sono messaggi che indicano se l'operazione è riuscita."
+
+#LangString str_msg_rm_start      ${LANG_ITALIAN} \
+#    "Disinstallazione della versione:"
+
+#LangString str_msg_rm_fail       ${LANG_ITALIAN} \
+#    "Disinstallazione non riuscita per la versione:"
+
+#LangString str_msg_no_rm_key     ${LANG_ITALIAN} \
+#    "Impossibile trovare chiave disinstallazione nel registro."
+
+#LangString str_msg_no_rm_reg     ${LANG_ITALIAN} \
+#    "Impossibile trovare programma disinstallazione nel registro."
+
+#LangString str_msg_no_rm_exe     ${LANG_ITALIAN} \
+#    "Impossibile trovare programma disinstallazione."
+
+#LangString str_msg_rm_copy_fail  ${LANG_ITALIAN} \
+#    "Impossibile copiare il programma disinstallazione in una cartella temporanea."
+
+#LangString str_msg_rm_run_fail   ${LANG_ITALIAN} \
+#    "Impossibile eseguire programma disinstallazione."
+
+#LangString str_msg_abort_install ${LANG_ITALIAN} \
+#    "Il programma di disinstallazione verrà chiuso senza aver eseguito nessuna modifica."
+
+LangString str_msg_install_fail  ${LANG_ITALIAN} \
+    "Installazione non riuscita."
+
+LangString str_msg_rm_exe_fail   ${LANG_ITALIAN} \
+    "Alcuni file in $0 non sono stati eliminati!$\r$\n\
+     I file vanno rimossi manualmente."
+
+#LangString str_msg_rm_root_fail  ${LANG_ITALIAN} \
+#    "AVVISO: impossibile eliminare $\"$vim_install_root$\", non è vuota!"
+
+LangString str_msg_uninstalling  ${LANG_ITALIAN} \
+    "Disinstallazione vecchia versione Vim..."
+
+LangString str_msg_registering   ${LANG_ITALIAN} \
+    "Aggiunta di Vim al registro..."
+
+LangString str_msg_unregistering ${LANG_ITALIAN} \
+    "Rimozione di Vim dal registro..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_ITALIAN} \
+    "Scelta impostazioni _vimrc"
+LangString str_vimrc_page_subtitle ${LANG_ITALIAN} \
+    "Scelta impostazioni funzionalità aggiuntive, tastiera e mouse."
+
+LangString str_msg_compat_title    ${LANG_ITALIAN} \
+    " Comportamento come Vi / Vim "
+LangString str_msg_compat_desc     ${LANG_ITALIAN} \
+    "&Compatibilità e funzionalità"
+LangString str_msg_compat_vi       ${LANG_ITALIAN} \
+    "Compatibile Vi"
+LangString str_msg_compat_vim      ${LANG_ITALIAN} \
+    "Vim originale"
+LangString str_msg_compat_defaults ${LANG_ITALIAN} \
+    "Vim con alcune funzionalità aggiuntive (defaults.vim)"
+LangString str_msg_compat_all      ${LANG_ITALIAN} \
+    "Vim con tutte le funzionalità aggiuntive (vimrc_example.vim) (predefinito)"
+
+LangString str_msg_keymap_title   ${LANG_ITALIAN} \
+    " Mappature tastiera "
+LangString str_msg_keymap_desc    ${LANG_ITALIAN} \
+    "&Rimappa alcuni tasti Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc.)"
+LangString str_msg_keymap_default ${LANG_ITALIAN} \
+    "Non rimappare i tasti (predefinito)"
+LangString str_msg_keymap_windows ${LANG_ITALIAN} \
+    "Rimappa solo alcuni tasti"
+
+LangString str_msg_mouse_title   ${LANG_ITALIAN} \
+    " Mouse "
+LangString str_msg_mouse_desc    ${LANG_ITALIAN} \
+    "&Comportamento pulsanti destro/sinistro"
+LangString str_msg_mouse_default ${LANG_ITALIAN} \
+    "Destro: menu popup, Sinistro: modalità visuale (predefinito)"
+LangString str_msg_mouse_windows ${LANG_ITALIAN} \
+    "Destro: menu popup, Sinistro: selezione modalità (Windows)"
+LangString str_msg_mouse_unix    ${LANG_ITALIAN} \
+    "Destro: estensione selezione, Sinistro: modalità visuale (Unix)"

nsis/lang/japanese.nsi

@@ -0,0 +1,297 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# japanese.nsi: Japanese language strings for gvim NSIS installer.
+#
+# Locale ID    : 1041
+# Locale Name  : ja
+# fileencoding : UTF-8
+# Author       : Ken Takata
+
+!insertmacro MUI_LANGUAGE "Japanese"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_JAPANESE} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_JAPANESE} \
+        "$(^Name) Uninstall"
+
+# Workarounds for NSIS Japanese translation. The messages are too long.
+# These should be better to be fixed by the NSIS upstream.
+LangString ^SpaceAvailable   ${LANG_JAPANESE} \
+        "利用可能なディスク容量："
+LangString ^SpaceRequired    ${LANG_JAPANESE} \
+        "必要なディスク容量："
+# Fix another NSIS Japanese translation. The access key was missing.
+LangString ^InstallBtn       ${LANG_JAPANESE} \
+        "インストール(&I)"
+
+##############################################################################
+# Translated license file for the license page                            {{{1
+##############################################################################
+
+LicenseLangString page_lic_file 0 "..\lang\LICENSE.nsis.txt"
+#LicenseLangString page_lic_file ${LANG_JAPANESE} "..\lang\LICENSE.ja.nsis.txt"
+
+##############################################################################
+# Translated README.txt file, which is opened after installation          {{{1
+##############################################################################
+
+LangString vim_readme_file 0 "README.txt"
+#LangString vim_readme_file ${LANG_JAPANESE} "README.ja.txt"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_JAPANESE} \
+#    "Destination Folder (Must end with $\"vim$\")"
+
+LangString str_show_readme          ${LANG_JAPANESE} \
+    "インストール完了後に README を表示する"
+
+# Install types:
+LangString str_type_typical         ${LANG_JAPANESE} \
+    "通常"
+
+LangString str_type_minimal         ${LANG_JAPANESE} \
+    "最小"
+
+LangString str_type_full            ${LANG_JAPANESE} \
+    "全て"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_JAPANESE} \
+    "既存のバージョンをアンインストール"
+LangString str_desc_old_ver         ${LANG_JAPANESE} \
+    "すでにインストールされている Vim をシステムから削除します。"
+
+LangString str_section_exe          ${LANG_JAPANESE} \
+    "Vim GUI とランタイムファイル"
+LangString str_desc_exe             ${LANG_JAPANESE} \
+    "Vim GUI 実行ファイルとラインタイムファイル。このコンポーネントは必須です。"
+
+LangString str_section_console      ${LANG_JAPANESE} \
+    "Vim コンソールプログラム"
+LangString str_desc_console         ${LANG_JAPANESE} \
+    "コンソール版の Vim (vim.exe)。"
+
+LangString str_section_batch        ${LANG_JAPANESE} \
+    ".bat ファイルを作成"
+LangString str_desc_batch           ${LANG_JAPANESE} \
+    "コマンドラインから Vim と関連コマンドを実行できるように、.bat ファイルを Windows ディレクトリに作成します。"
+
+LangString str_group_icons          ${LANG_JAPANESE} \
+    "Vim のアイコンを作成"
+LangString str_desc_icons           ${LANG_JAPANESE} \
+    "Vim を簡単に実行できるように、いくつかの場所にアイコンを作成します。"
+
+LangString str_section_desktop      ${LANG_JAPANESE} \
+    "デスクトップ上"
+LangString str_desc_desktop         ${LANG_JAPANESE} \
+    "gVim 実行ファイルのアイコンをデスクトップ上に作成します。"
+
+LangString str_section_start_menu   ${LANG_JAPANESE} \
+    "スタートメニューのプログラムフォルダー上"
+LangString str_desc_start_menu      ${LANG_JAPANESE} \
+    "Vim のアイコンをスタートメニューのプログラムフォルダー上に作成します。"
+
+#LangString str_section_quick_launch ${LANG_JAPANESE} \
+#    "In the Quick Launch Bar"
+#LangString str_desc_quick_launch    ${LANG_JAPANESE} \
+#    "Add Vim shortcut in the quick launch bar."
+
+LangString str_section_edit_with    ${LANG_JAPANESE} \
+    "Vim のコンテキストメニューを追加"
+LangString str_desc_edit_with       ${LANG_JAPANESE} \
+    "$\"Vimで編集する$\" をコンテキストメニューに追加します。"
+
+#LangString str_section_edit_with32  ${LANG_JAPANESE} \
+#    "32-bit Version"
+#LangString str_desc_edit_with32     ${LANG_JAPANESE} \
+#    "Add Vim to the $\"Open With...$\" context menu list \
+#     for 32-bit applications."
+
+#LangString str_section_edit_with64  ${LANG_JAPANESE} \
+#    "64-bit Version"
+#LangString str_desc_edit_with64     ${LANG_JAPANESE} \
+#    "Add Vim to the $\"Open With...$\" context menu list \
+#     for 64-bit applications."
+
+LangString str_section_vim_rc       ${LANG_JAPANESE} \
+    "既定のコンフィグを作成"
+LangString str_desc_vim_rc          ${LANG_JAPANESE} \
+    "もし無ければ、既定のコンフィグファイル (_vimrc) を作成します。"
+
+LangString str_group_plugin         ${LANG_JAPANESE} \
+    "プラグインディレクトリを作成"
+LangString str_desc_plugin          ${LANG_JAPANESE} \
+    "プラグインディレクトリを作成します。そこにプラグインファイルを置くことで Vim を拡張することができます。"
+
+LangString str_section_plugin_home  ${LANG_JAPANESE} \
+    "個人用"
+LangString str_desc_plugin_home     ${LANG_JAPANESE} \
+    "プラグインディレクトリをホームディレクトリに作成します。"
+
+LangString str_section_plugin_vim   ${LANG_JAPANESE} \
+    "共用"
+LangString str_desc_plugin_vim      ${LANG_JAPANESE} \
+    "プラグインディレクトリを Vim のインストールディレクトリに作成します。システムの全員で共有されます。"
+
+LangString str_section_nls          ${LANG_JAPANESE} \
+    "多言語サポート"
+LangString str_desc_nls             ${LANG_JAPANESE} \
+    "多言語サポート用のファイルをインストールします。"
+
+LangString str_unsection_register   ${LANG_JAPANESE} \
+    "Vim を登録解除"
+LangString str_desc_unregister      ${LANG_JAPANESE} \
+    "Vim をシステムから登録解除します。"
+
+LangString str_unsection_exe        ${LANG_JAPANESE} \
+    "Vim の実行ファイル/ランタイムファイルを削除"
+LangString str_desc_rm_exe          ${LANG_JAPANESE} \
+    "全ての Vim の実行ファイルとランタイムファイルを削除します。"
+
+LangString str_ungroup_plugin       ${LANG_JAPANESE} \
+    "プラグインディレクトリを削除"
+LangString str_desc_rm_plugin       ${LANG_JAPANESE} \
+    "プラグインディレクトリが空であればそれを削除します。"
+
+LangString str_unsection_plugin_home ${LANG_JAPANESE} \
+    "個人用"
+LangString str_desc_rm_plugin_home  ${LANG_JAPANESE} \
+    "プラグインディレクトリをホームディレクトリから削除します。"
+
+LangString str_unsection_plugin_vim ${LANG_JAPANESE} \
+    "共用"
+LangString str_desc_rm_plugin_vim   ${LANG_JAPANESE} \
+    "プラグインディレクトリを Vim のインストールディレクトリから削除します。"
+
+LangString str_unsection_rootdir    ${LANG_JAPANESE} \
+    "Vim のトップディレクトリを削除"
+LangString str_desc_rm_rootdir      ${LANG_JAPANESE} \
+    "Vim のトップディレクトリを削除します。あなたの Vim の設定ファイルも含まれていることに注意してください！"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_JAPANESE} \
+#    "Found $vim_old_ver_count Vim versions on your system.$\r$\n\
+#     This installer can only handle ${VIM_MAX_OLD_VER} versions \
+#     at most.$\r$\n\
+#     Please remove some versions and start again."
+
+#LangString str_msg_invalid_root  ${LANG_JAPANESE} \
+#    "Invalid install path: $vim_install_root!$\r$\n\
+#     It should end with $\"vim$\"."
+
+#LangString str_msg_bin_mismatch  ${LANG_JAPANESE} \
+#    "Binary path mismatch!$\r$\n$\r$\n\
+#     Expect the binary path to be $\"$vim_bin_path$\",$\r$\n\
+#     but system indicates the binary path is $\"$INSTDIR$\"."
+
+#LangString str_msg_vim_running   ${LANG_JAPANESE} \
+#    "Vim is still running on your system.$\r$\n\
+#     Please close all instances of Vim before you continue."
+
+#LangString str_msg_register_ole  ${LANG_JAPANESE} \
+#    "Attempting to register Vim with OLE. \
+#     There is no message indicates whether this works or not."
+
+#LangString str_msg_unreg_ole     ${LANG_JAPANESE} \
+#    "Attempting to unregister Vim with OLE. \
+#     There is no message indicates whether this works or not."
+
+#LangString str_msg_rm_start      ${LANG_JAPANESE} \
+#    "Uninstalling the following version:"
+
+#LangString str_msg_rm_fail       ${LANG_JAPANESE} \
+#    "Fail to uninstall the following version:"
+
+#LangString str_msg_no_rm_key     ${LANG_JAPANESE} \
+#    "Cannot find uninstaller registry key."
+
+#LangString str_msg_no_rm_reg     ${LANG_JAPANESE} \
+#    "Cannot find uninstaller from registry."
+
+#LangString str_msg_no_rm_exe     ${LANG_JAPANESE} \
+#    "Cannot access uninstaller."
+
+#LangString str_msg_rm_copy_fail  ${LANG_JAPANESE} \
+#    "Fail to copy uninstaller to temporary directory."
+
+#LangString str_msg_rm_run_fail   ${LANG_JAPANESE} \
+#    "Fail to run uninstaller."
+
+#LangString str_msg_abort_install ${LANG_JAPANESE} \
+#    "Installer will abort."
+
+LangString str_msg_install_fail  ${LANG_JAPANESE} \
+    "インストールに失敗しました。次はうまくいくことを祈ります。"
+
+LangString str_msg_rm_exe_fail   ${LANG_JAPANESE} \
+    "$0 内の一部のファイルは削除できませんでした!$\r$\n\
+     手動で削除する必要があります。"
+
+#LangString str_msg_rm_root_fail  ${LANG_JAPANESE} \
+#    "WARNING: Cannot remove $\"$vim_install_root$\", it is not empty!"
+
+LangString str_msg_uninstalling  ${LANG_JAPANESE} \
+    "古いバージョンをアンインストールしています..."
+
+LangString str_msg_registering   ${LANG_JAPANESE} \
+    "登録中..."
+
+LangString str_msg_unregistering ${LANG_JAPANESE} \
+    "登録解除中..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_JAPANESE} \
+    "_vimrc の設定を選んでください"
+LangString str_vimrc_page_subtitle ${LANG_JAPANESE} \
+    "拡張やキーボード、マウスの設定を選んでください。"
+
+LangString str_msg_compat_title    ${LANG_JAPANESE} \
+    " Vi / Vim の動作 "
+LangString str_msg_compat_desc     ${LANG_JAPANESE} \
+    "互換性と拡張(&C)"
+LangString str_msg_compat_vi       ${LANG_JAPANESE} \
+    "Vi 互換"
+LangString str_msg_compat_vim      ${LANG_JAPANESE} \
+    "Vim 独自"
+LangString str_msg_compat_defaults ${LANG_JAPANESE} \
+    "Vim 独自と多少の拡張 (defaults.vim を読み込み)"
+LangString str_msg_compat_all      ${LANG_JAPANESE} \
+    "Vim 独自と全ての拡張 (vimrc_example.vim を読み込み) (既定)"
+
+LangString str_msg_keymap_title   ${LANG_JAPANESE} \
+    " マッピング "
+LangString str_msg_keymap_desc    ${LANG_JAPANESE} \
+    "Windows用に一部のキーをリマップする(&R) (例: Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F など)"
+LangString str_msg_keymap_default ${LANG_JAPANESE} \
+    "リマップしない (既定)"
+LangString str_msg_keymap_windows ${LANG_JAPANESE} \
+    "リマップする"
+
+LangString str_msg_mouse_title   ${LANG_JAPANESE} \
+    " マウス "
+LangString str_msg_mouse_desc    ${LANG_JAPANESE} \
+    "右ボタンと左ボタンの動作(&B)"
+LangString str_msg_mouse_default ${LANG_JAPANESE} \
+    "右：ポップアップメニュー、左：ビジュアルモード (既定)"
+LangString str_msg_mouse_windows ${LANG_JAPANESE} \
+    "右：ポップアップメニュー、左：選択モード (Windows)"
+LangString str_msg_mouse_unix    ${LANG_JAPANESE} \
+    "右：選択を拡張、左：ビジュアルモード (Unix)"

nsis/lang/portuguesebr.nsi

@@ -0,0 +1,291 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# portuguesebr.nsi: Brazilian Portuguese strings for gvim NSIS installer.
+#
+# Locale ID    : 1046 
+# Locale Name  : pt-BR
+# fileencoding : UTF-8
+# Author       : Rafael Fontenelle
+
+!insertmacro MUI_LANGUAGE "PortugueseBR"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_PORTUGUESEBR} \
+        "Configuração do $(^Name)"
+LangString ^UninstallCaption ${LANG_PORTUGUESEBR} \
+        "Desinstalação do $(^Name)"
+
+##############################################################################
+# License file for the license page                                       {{{1
+##############################################################################
+
+LicenseLangString page_lic_file ${LANG_PORTUGUESEBR} "..\lang\LICENSE.pt_br.nsis.txt"
+
+##############################################################################
+# README.txt file, which is opened after installation                     {{{1
+##############################################################################
+
+LangString vim_readme_file ${LANG_PORTUGUESEBR} "README.pt_br.txt"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_PORTUGUESEBR} \
+#    "Pasta de destino (Deve terminar com $\"vim$\")"
+
+LangString str_show_readme          ${LANG_PORTUGUESEBR} \
+    "Mostrar o README ao concluir a instalação"
+
+# Install types:
+LangString str_type_typical         ${LANG_PORTUGUESEBR} \
+    "Típica"
+
+LangString str_type_minimal         ${LANG_PORTUGUESEBR} \
+    "Mínima"
+
+LangString str_type_full            ${LANG_PORTUGUESEBR} \
+    "Completa"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_PORTUGUESEBR} \
+    "Desinstalar versões existentes"
+LangString str_desc_old_ver         ${LANG_PORTUGUESEBR} \
+    "Desinstala versões do Vim existentes no seu sistema."
+
+LangString str_section_exe          ${LANG_PORTUGUESEBR} \
+    "Vim GUI e arquivos de runtime"
+LangString str_desc_exe             ${LANG_PORTUGUESEBR} \
+    "Executáveis ​​e arquivos de runtime do Vim GUI. Este componente \
+     é obrigatório."
+
+LangString str_section_console      ${LANG_PORTUGUESEBR} \
+    "Programa de console do Vim"
+LangString str_desc_console         ${LANG_PORTUGUESEBR} \
+    "Versão de console do Vim (vim.exe)."
+
+LangString str_section_batch        ${LANG_PORTUGUESEBR} \
+    "Criar arquivos .bat"
+LangString str_desc_batch           ${LANG_PORTUGUESEBR} \
+    "Cria arquivos .bat para variantes do Vim no diretório Windows para \
+     usar na linha de comando."
+
+LangString str_group_icons          ${LANG_PORTUGUESEBR} \
+    "Criar ícones para o Vim"
+LangString str_desc_icons           ${LANG_PORTUGUESEBR} \
+    "Cria ícones para Vim em vários locais para facilitar o acesso rápido."
+
+LangString str_section_desktop      ${LANG_PORTUGUESEBR} \
+    "Na área de trabalho"
+LangString str_desc_desktop         ${LANG_PORTUGUESEBR} \
+    "Cria ícones para executáveis do gVim na área de trabalho."
+
+LangString str_section_start_menu   ${LANG_PORTUGUESEBR} \
+    "Na pasta Programas do Menu Iniciar"
+LangString str_desc_start_menu      ${LANG_PORTUGUESEBR} \
+    "Adiciona Vim na pasta de programas do menu iniciar."
+
+#LangString str_section_quick_launch ${LANG_PORTUGUESEBR} \
+#    "Na barra de Inicialização Rápida"
+#LangString str_desc_quick_launch    ${LANG_PORTUGUESEBR} \
+#    "Adiciona um atalho para o Vim na barra de inicialização rápida."
+
+LangString str_section_edit_with    ${LANG_PORTUGUESEBR} \
+    "Adicionar menu de contexto do Vim"
+LangString str_desc_edit_with       ${LANG_PORTUGUESEBR} \
+    "Adiciona o Vim à lista $\"Abrir com...$\" do menu de contexto."
+
+#LangString str_section_edit_with32  ${LANG_PORTUGUESEBR} \
+#    "Versão 32 bits"
+#LangString str_desc_edit_with32     ${LANG_PORTUGUESEBR} \
+#    "Adiciona o Vim à lista $\"Abrir com...$\" do menu de contexto \
+#     para aplicativos 32 bits."
+
+#LangString str_section_edit_with64  ${LANG_PORTUGUESEBR} \
+#    "Versão 64 bits"
+#LangString str_desc_edit_with64     ${LANG_PORTUGUESEBR} \
+#    "Adiciona o Vim à lista $\"Abrir com...$\" do menu de contexto \
+#     para aplicativos 64 bits."
+
+LangString str_section_vim_rc       ${LANG_PORTUGUESEBR} \
+    "Criar configuração padrão"
+LangString str_desc_vim_rc          ${LANG_PORTUGUESEBR} \
+    "Cria um arquivo de configuração padrão (_vimrc) se não já existir."
+
+LangString str_group_plugin         ${LANG_PORTUGUESEBR} \
+    "Criar diretórios de plugins"
+LangString str_desc_plugin          ${LANG_PORTUGUESEBR} \
+    "Cria diretórios de plugins. Diretórios de plugins permitem estender \
+     o Vim adicionando um arquivo a um direótrio."
+
+LangString str_section_plugin_home  ${LANG_PORTUGUESEBR} \
+    "Privados"
+LangString str_desc_plugin_home     ${LANG_PORTUGUESEBR} \
+    "Cria diretórios de plugins no diretório HOME."
+
+LangString str_section_plugin_vim   ${LANG_PORTUGUESEBR} \
+    "Compartilhados"
+LangString str_desc_plugin_vim      ${LANG_PORTUGUESEBR} \
+    "Cria diretórios de plugins no diretório de instalação do Vim, \
+     o qual é usado por todos os usuários do sistema."
+
+LangString str_section_nls          ${LANG_PORTUGUESEBR} \
+    "Suporte ao idioma nativo"
+LangString str_desc_nls             ${LANG_PORTUGUESEBR} \
+    "Instala arquivos para suporte ao idioma nativo."
+
+LangString str_unsection_register   ${LANG_PORTUGUESEBR} \
+    "Desregistrar Vim"
+LangString str_desc_unregister      ${LANG_PORTUGUESEBR} \
+    "Remove os registras do Vim do sistema."
+
+LangString str_unsection_exe        ${LANG_PORTUGUESEBR} \
+    "Remover arquivos executáveis/runtime do Vim"
+LangString str_desc_rm_exe          ${LANG_PORTUGUESEBR} \
+    "Remove todos os arquivos executáveis e de runtime do Vim."
+
+LangString str_ungroup_plugin       ${LANG_PORTUGUESEBR} \
+    "Remover diretórios de plugins"
+LangString str_desc_rm_plugin       ${LANG_PORTUGUESEBR} \
+    "Remove os diretórios de plugins se eles estiverem vazios."
+
+LangString str_unsection_plugin_home ${LANG_PORTUGUESEBR} \
+    "Privados"
+LangString str_desc_rm_plugin_home  ${LANG_PORTUGUESEBR} \
+    "Remove os diretórios de plugins do diretório HOME."
+
+LangString str_unsection_plugin_vim ${LANG_PORTUGUESEBR} \
+    "Compartilhados"
+LangString str_desc_rm_plugin_vim   ${LANG_PORTUGUESEBR} \
+    "Remove os diretórios de plugins do diretório de instalação do Vim."
+
+LangString str_unsection_rootdir    ${LANG_PORTUGUESEBR} \
+    "Remover diretório raiz do Vim"
+LangString str_desc_rm_rootdir      ${LANG_PORTUGUESEBR} \
+    "Remove o diretório raiz do Vim. Ele contém seus \
+     arquivos de configuração do Vim!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_PORTUGUESEBR} \
+#    "Encontradas $vim_old_ver_count versões do Vim em seu sistema.$\r$\n\
+#     Este instalador só consegue lidar com ${VIM_MAX_OLD_VER} versões\
+#     no máximo.$\r$\n\
+#     Por favor, remova algumas versões e comece novamente."
+
+#LangString str_msg_invalid_root  ${LANG_PORTUGUESEBR} \
+#    "Caminho de instalação inválido: $vim_install_root!$\r$\n\
+#     Ele deve terminar com $\"vim$\"."
+
+#LangString str_msg_bin_mismatch  ${LANG_PORTUGUESEBR} \
+#    "Incompatibilidade de caminho de binários!$\r$\n$\r$\n\
+#     Esperava que o caminho de binários fosse $\"$vim_bin_path$\",$\r$\n\
+#     mas o sistema indica que o caminho de binários é $\"$INSTDIR$\"."
+
+#LangString str_msg_vim_running   ${LANG_PORTUGUESEBR} \
+#    "Vim ainda está em execução em seu sistema.$\r$\n\
+#     Por favor, feche todas as instâncias do Vim para poder continuar."
+
+#LangString str_msg_register_ole  ${LANG_PORTUGUESEBR} \
+#    "Tentativa de registrar o Vim com OLE. \
+#     Não há mensagem que indique se isso funciona ou não."
+
+#LangString str_msg_unreg_ole     ${LANG_PORTUGUESEBR} \
+#    "Tentando desregistrar o Vim com OLE. \
+#     Não há mensagem que indique se isso funciona ou não."
+
+#LangString str_msg_rm_start      ${LANG_PORTUGUESEBR} \
+#    "Desinstalando a seguinte versão:"
+
+#LangString str_msg_rm_fail       ${LANG_PORTUGUESEBR} \
+#    "Falha ao desinstalar a seguinte versão:"
+
+#LangString str_msg_no_rm_key     ${LANG_PORTUGUESEBR} \
+#    "Não foi possível encontrar a chave de registro do desinstalador."
+
+#LangString str_msg_no_rm_reg     ${LANG_PORTUGUESEBR} \
+#    "Não foi possível encontrar o desinstalador a partir do registro."
+
+#LangString str_msg_no_rm_exe     ${LANG_PORTUGUESEBR} \
+#    "Não foi possível acessar o desinstalador."
+
+#LangString str_msg_rm_copy_fail  ${LANG_PORTUGUESEBR} \
+#    "Falha ao copiar o desinstalador para um diretório temporário."
+
+#LangString str_msg_rm_run_fail   ${LANG_PORTUGUESEBR} \
+#    "Falha ao executar o desinstalador."
+
+#LangString str_msg_abort_install ${LANG_PORTUGUESEBR} \
+#    "Instalador será interrompido."
+
+LangString str_msg_install_fail  ${LANG_PORTUGUESEBR} \
+    "A instalação falhou. Mais sorte na próxima vez."
+
+LangString str_msg_rm_exe_fail   ${LANG_PORTUGUESEBR} \
+    "Alguns arquivos em $0 não foram excluídos!$\r$\n\
+     Você deve fazê-lo manualmente."
+
+#LangString str_msg_rm_root_fail  ${LANG_PORTUGUESEBR} \
+#    "AVISO: Não foi possível remover $\"$vim_install_root$\", \
+#    pois não está vazio!"
+
+LangString str_msg_uninstalling  ${LANG_PORTUGUESEBR} \
+    "Desinstalando a versão antiga..."
+
+LangString str_msg_registering   ${LANG_PORTUGUESEBR} \
+    "Registrando..."
+
+LangString str_msg_unregistering ${LANG_PORTUGUESEBR} \
+    "Desregistrando..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_PORTUGUESEBR} \
+    "Escolher configurações do _vimrc"
+LangString str_vimrc_page_subtitle ${LANG_PORTUGUESEBR} \
+    "Escolha as configurações para melhorias, teclado e mouse."
+
+LangString str_msg_compat_title    ${LANG_PORTUGUESEBR} \
+    " Comportamento Vi / Vim "
+LangString str_msg_compat_desc     ${LANG_PORTUGUESEBR} \
+    "&Compatibilidade e melhorias"
+LangString str_msg_compat_vi       ${LANG_PORTUGUESEBR} \
+    "Compatível com Vi"
+LangString str_msg_compat_vim      ${LANG_PORTUGUESEBR} \
+    "Vim original"
+LangString str_msg_compat_defaults ${LANG_PORTUGUESEBR} \
+    "Vim com algumas melhorias (carrega defaults.vim)"
+LangString str_msg_compat_all      ${LANG_PORTUGUESEBR} \
+    "Vim com todas as melhorias (carrega vimrc_example.vim) (Padrão)"
+
+LangString str_msg_keymap_title   ${LANG_PORTUGUESEBR} \
+    " Mapeamentos "
+LangString str_msg_keymap_desc    ${LANG_PORTUGUESEBR} \
+    "&Remapear algumas teclas para o Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+LangString str_msg_keymap_default ${LANG_PORTUGUESEBR} \
+    "Não remapear teclas (Padrão)"
+LangString str_msg_keymap_windows ${LANG_PORTUGUESEBR} \
+    "Remapear algumas teclas"
+
+LangString str_msg_mouse_title   ${LANG_PORTUGUESEBR} \
+    " Mouse "
+LangString str_msg_mouse_desc    ${LANG_PORTUGUESEBR} \
+    "&Comportamento de botões direito e esquerdo"
+LangString str_msg_mouse_default ${LANG_PORTUGUESEBR} \
+    "Direito: menu popup, Esquerdo: modo visual (Padrão)"
+LangString str_msg_mouse_windows ${LANG_PORTUGUESEBR} \
+    "Direito: menu popup, Esquerdo: modo de seleção (Windows)"
+LangString str_msg_mouse_unix    ${LANG_PORTUGUESEBR} \
+    "Direito: estende seleção, Esquerdo: modo visual (Unix)"

nsis/lang/russian.nsi

@@ -0,0 +1,304 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# russian.nsi: Russian language strings for gvim NSIS installer.
+#
+# Locale ID    : 1049
+# Locale name  : ru
+# fileencoding : UTF-8
+# Author       : Restorer
+
+!insertmacro MUI_LANGUAGE "Russian"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_RUSSIAN} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_RUSSIAN} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# Translated license file for the license page                            {{{1
+##############################################################################
+
+LicenseLangString page_lic_file ${LANG_RUSSIAN} "..\lang\LICENSE.ru.nsis.txt"
+
+##############################################################################
+# Translated README.txt file, which is opened after installation          {{{1
+##############################################################################
+
+LangString vim_readme_file ${LANG_RUSSIAN} "README.ru.txt"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_RUSSIAN} \
+#    "Маршрут установки программы (должен завершаться каталогом $\"vim$\")"
+
+LangString str_show_readme          ${LANG_RUSSIAN} \
+    " Ознакомиться с кратким описанием программы"
+
+# Install types:
+LangString str_type_typical         ${LANG_RUSSIAN} \
+    "Стандартный"
+
+LangString str_type_minimal         ${LANG_RUSSIAN} \
+    "Минимальный"
+
+LangString str_type_full            ${LANG_RUSSIAN} \
+    "Полный"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_RUSSIAN} \
+    "Удаление предыдущих версий"
+LangString str_desc_old_ver         ${LANG_RUSSIAN} \
+    "Будут удалены предыдущие установленные версии программы"
+
+LangString str_section_exe          ${LANG_RUSSIAN} \
+    "Графический интерфейс и вспомогательные файлы"
+LangString str_desc_exe             ${LANG_RUSSIAN} \
+    "Исполняемые файлы и все необходимые для работы программы файлы. \
+    Это обязательный компонент"
+
+LangString str_section_console      ${LANG_RUSSIAN} \
+    "Консольная программа Vim"
+LangString str_desc_console         ${LANG_RUSSIAN} \
+    "Вариант редактора Vim (vim.exe), используемый для работы в командной \
+    оболочке"
+
+LangString str_section_batch        ${LANG_RUSSIAN} \
+    "Создать командные файлы"
+LangString str_desc_batch           ${LANG_RUSSIAN} \
+    "Создание командных bat-файлов в каталоге Windows для работы с редактором \
+    Vim из командной строки"
+
+LangString str_group_icons          ${LANG_RUSSIAN} \
+    "Создать ярлыки для редактора Vim"
+LangString str_desc_icons           ${LANG_RUSSIAN} \
+    "Создание ярлыков программы для удобного и быстрого запуска редактора Vim"
+
+LangString str_section_desktop      ${LANG_RUSSIAN} \
+    "На Рабочем столе"
+LangString str_desc_desktop         ${LANG_RUSSIAN} \
+    "Создание ярлыков редактора Vim на Рабочем столе"
+
+LangString str_section_start_menu   ${LANG_RUSSIAN} \
+    "В меню кнопки Пуск"
+LangString str_desc_start_menu      ${LANG_RUSSIAN} \
+    "Создание ярлыков редактора Vim в меню кнопки Пуск"
+
+#LangString str_section_quick_launch ${LANG_RUSSIAN} \
+#    "На панели быстрого запуска"
+#LangString str_desc_quick_launch    ${LANG_RUSSIAN} \
+#    "Создание ярлыков редактора Vim на панели быстрого запуска"
+
+LangString str_section_edit_with    ${LANG_RUSSIAN} \
+    "Запуск редактора Vim из контекстного меню"
+LangString str_desc_edit_with       ${LANG_RUSSIAN} \
+    "Добавление необходимой строки в пункт контекстного меню \
+    «Открыть с помощью...»"
+
+#LangString str_section_edit_with32  ${LANG_RUSSIAN} \
+#    "Для 32-разрядной версии программы"
+#LangString str_desc_edit_with32     ${LANG_RUSSIAN} \
+#    "Добавление в пункт контекстного меню \
+#    «Открыть с помощью...» 32-разрядных приложений"
+
+#LangString str_section_edit_with64  ${LANG_RUSSIAN} \
+#    "Для 64-разрядной версии программы"
+#LangString str_desc_edit_with64     ${LANG_RUSSIAN} \
+#    "Добавление в пункт контекстного меню \
+#    «Открыть с помощью...» 64-разрядных приложений"
+
+LangString str_section_vim_rc       ${LANG_RUSSIAN} \
+    "Начальная настройка программы"
+LangString str_desc_vim_rc          ${LANG_RUSSIAN} \
+    "Создание файла _vimrc с предустановленными настройками, если нет других \
+    файлов настроек"
+
+LangString str_group_plugin         ${LANG_RUSSIAN} \
+    "Создать каталог для подключаемых модулей"
+LangString str_desc_plugin          ${LANG_RUSSIAN} \
+    "Создание каталога для подключаемых модулей, которые расширяют возможности \
+    редактора Vim"
+
+LangString str_section_plugin_home  ${LANG_RUSSIAN} \
+    "Личный каталог"
+LangString str_desc_plugin_home     ${LANG_RUSSIAN} \
+    "В домашнем каталоге пользователя. Модули в этом каталоге доступны только \
+    этому пользователю"
+
+LangString str_section_plugin_vim   ${LANG_RUSSIAN} \
+    "Общий каталог"
+LangString str_desc_plugin_vim      ${LANG_RUSSIAN} \
+    "В каталоге установки редактора Vim. Модули в этом каталоге доступны для \
+    всех пользователей"
+
+#LangString str_section_vis_vim      ${LANG_RUSSIAN} \
+#    "Подключаемый модуль VisVim"
+#LangString str_desc_vis_vim         ${LANG_RUSSIAN} \
+#    "Подключаемый модуль VisVim используется для интеграции с \
+#    Microsoft Visual Studio"
+
+LangString str_section_nls          ${LANG_RUSSIAN} \
+    "Поддержка региональных языков"
+LangString str_desc_nls             ${LANG_RUSSIAN} \
+    "Установка файлов для работы программе на различных региональных языках"
+
+LangString str_unsection_register   ${LANG_RUSSIAN} \
+    "Отменить регистрацию компонентов программы Vim"
+LangString str_desc_unregister      ${LANG_RUSSIAN} \
+    "Отмена регистрации компонентов программы Vim в операционной системе"
+
+LangString str_unsection_exe        ${LANG_RUSSIAN} \
+    "Удалить файлы редактора Vim"
+LangString str_desc_rm_exe          ${LANG_RUSSIAN} \
+    "Удаление всех исполняемых и вспомогательных файлов редактора Vim"
+
+LangString str_ungroup_plugin       ${LANG_RUSSIAN} \
+    "Удалить каталог подключаемых модулей"
+LangString str_desc_rm_plugin       ${LANG_RUSSIAN} \
+    "Удаление каталога подключаемых модулей, если в нём нет файлов"
+
+LangString str_unsection_plugin_home ${LANG_RUSSIAN} \
+    "Личный каталог"
+LangString str_desc_rm_plugin_home  ${LANG_RUSSIAN} \
+    "Удаление каталога подключаемых модулей из домашнего каталога пользователя"
+
+LangString str_unsection_plugin_vim ${LANG_RUSSIAN} \
+    "Общий каталог"
+LangString str_desc_rm_plugin_vim   ${LANG_RUSSIAN} \
+    "Удаление каталога подключаемых модулей из каталога установки редактора Vim"
+
+LangString str_unsection_rootdir    ${LANG_RUSSIAN} \
+    "Удалить основной каталог программы Vim"
+LangString str_desc_rm_rootdir      ${LANG_RUSSIAN} \
+    "Удаление основного каталога программы Vim. В этом каталоге находятся \
+    файлы настроек!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_RUSSIAN} \
+#    "Обнаружено предыдущих версий программы Vim: $vim_old_ver_count.$\r$\n\
+#     Данная программа установки может удалить не более ${VIM_MAX_OLD_VER}.$\r$\n\
+#     Удалить лишние версии программы Vim и повторите установку"
+
+#LangString str_msg_invalid_root  ${LANG_RUSSIAN} \
+#    "Недопустимый каталог установки программы Vim $vim_install_root!$\r$\n\
+#     Маршрут установки должен оканчиваться каталогом $\"vim$\""
+
+#LangString str_msg_bin_mismatch  ${LANG_RUSSIAN} \
+#    "Недопустимый маршрут к каталогу с исполняемыми файлами!$\r$\n$\r$\n\
+#     Маршрут к каталогу с исполняемыми файлами должен быть $\"$vim_bin_path$\",$\r$\n\
+#     но от операционной системы получен как $\"$INSTDIR$\"."
+
+#LangString str_msg_vim_running   ${LANG_RUSSIAN} \
+#    "Программа Vim сейчас работает.$\r$\n\
+#     Прежде чем продолжить, закройте все работающие редакторы Vim"
+
+#LangString str_msg_register_ole  ${LANG_RUSSIAN} \
+#    "Попытка зарегистрировать компоненты программы Vim в пространстве OLE. \
+#     Но не получено уведомление об успешности данной операции"
+
+#LangString str_msg_unreg_ole     ${LANG_RUSSIAN} \
+#    "Попытка отменить регистрацию компонентов программы Vim в пространстве OLE. \
+#     Но не получено уведомление об успешности данной операции"
+
+#LangString str_msg_rm_start      ${LANG_RUSSIAN} \
+#    "Выполняется удаление следующих версий программы:"
+
+#LangString str_msg_rm_fail       ${LANG_RUSSIAN} \
+#    "Произошёл сбой при выполнении удаления следующих версий программы:"
+
+#LangString str_msg_no_rm_key     ${LANG_RUSSIAN} \
+#    "Не удалось найти раздел реестра, содержащий информацию об удалении \
+#    программы"
+
+#LangString str_msg_no_rm_reg     ${LANG_RUSSIAN} \
+#    "Не удалось найти указанную в реестре программу, которая выполняет удаление"
+
+#LangString str_msg_no_rm_exe     ${LANG_RUSSIAN} \
+#    "Отсутствуют права на доступ к программе, выполняющей удаление"
+
+#LangString str_msg_rm_copy_fail  ${LANG_RUSSIAN} \
+#    "Произошла ошибка при копировании программы удаления во временный каталог"
+
+#LangString str_msg_rm_run_fail   ${LANG_RUSSIAN} \
+#    "Произошёл сбой при запуске программы, выполняющей удаление"
+
+#LangString str_msg_abort_install ${LANG_RUSSIAN} \
+#    "Установка программы была отменена"
+
+LangString str_msg_install_fail  ${LANG_RUSSIAN} \
+    "Произошла ошибка при установке программы. Попробуйте повторить установку \
+    немного попозже"
+# когда Луна будет в другой фазе и ветер должен дуть с юго‐запада
+
+LangString str_msg_rm_exe_fail   ${LANG_RUSSIAN} \
+    "Некоторые файлы не были удалены из каталога $0 $\r$\n\
+     Необходимо выполнить их удаление самостоятельно"
+
+#LangString str_msg_rm_root_fail  ${LANG_RUSSIAN} \
+#    "Внимание! В каталоге $\"$vim_install_root$\" содержатся файлы. Удаление \
+#    каталога не выполнено"
+
+LangString str_msg_uninstalling  ${LANG_RUSSIAN} \
+    "Удаление предыдущих версий программ..."
+
+LangString str_msg_registering   ${LANG_RUSSIAN} \
+    "Регистрация компонентов программы в системе..."
+
+LangString str_msg_unregistering ${LANG_RUSSIAN} \
+    "Отмена регистрации компонентов программы в системе..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_RUSSIAN} \
+    "Установка параметров программы"
+LangString str_vimrc_page_subtitle ${LANG_RUSSIAN} \
+    "Параметры, используемые для клавиатуры, манипулятора «мышь» и \
+    функциональности программы"
+
+LangString str_msg_compat_title    ${LANG_RUSSIAN} \
+    " Варианты использования программы "
+LangString str_msg_compat_desc     ${LANG_RUSSIAN} \
+    "Совместимость и функциональность программы"
+LangString str_msg_compat_vi       ${LANG_RUSSIAN} \
+    "Работа в варианте совместимости с редактором Vi"
+LangString str_msg_compat_vim      ${LANG_RUSSIAN} \
+    "Работа в варианте функциональности редактора Vim"
+LangString str_msg_compat_defaults ${LANG_RUSSIAN} \
+    "Включить некоторые улучшения (из файла defaults.vim)"
+LangString str_msg_compat_all      ${LANG_RUSSIAN} \
+    "Включить все улучшения (из файла vimrc_example.vim). Стандартно"
+
+LangString str_msg_keymap_title   ${LANG_RUSSIAN} \
+    " Клавиатурные команды "
+LangString str_msg_keymap_desc    ${LANG_RUSSIAN} \
+    "Изменение клавиатурных команд CTRL+V, CTRL+C, CTRL+S, CTRL+F и т. п."
+LangString str_msg_keymap_default ${LANG_RUSSIAN} \
+    "Без изменения, использовать как принято в редакторе Vim"
+LangString str_msg_keymap_windows ${LANG_RUSSIAN} \
+    "Изменить и использовать как принято в ОС Windows"
+
+LangString str_msg_mouse_title   ${LANG_RUSSIAN} \
+    " Манипулятор «мышь» "
+LangString str_msg_mouse_desc    ${LANG_RUSSIAN} \
+    "Действия правой и левой кнопки манипулятора «мышь»"
+LangString str_msg_mouse_default ${LANG_RUSSIAN} \
+    "Правая — всплывающее меню, левая — режим визуальный (Vim)"
+LangString str_msg_mouse_windows ${LANG_RUSSIAN} \
+    "Правая — всплывающее меню, левая — режим выборки (Windows)"
+LangString str_msg_mouse_unix    ${LANG_RUSSIAN} \
+    "Правая — расширение выборки, левая — режим визуальный (UNIX)"

nsis/lang/serbian.nsi

@@ -0,0 +1,290 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# serbian.nsi: Serbian language strings for gvim NSIS installer.
+#
+# Locale ID    : 3098
+# Locale Name  : sr
+# fileencoding : UTF-8
+# Author       : Ivan Pešić
+
+!insertmacro MUI_LANGUAGE "Serbian"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_SERBIAN} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_SERBIAN} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# Translated license file for the license page                            {{{1
+##############################################################################
+
+LicenseLangString page_lic_file 0 "..\lang\LICENSE.nsis.txt"
+#LicenseLangString page_lic_file ${LANG_SERBIAN} "..\lang\LICENSE.sr.nsis.txt"
+
+##############################################################################
+# Translated README.txt file, which is opened after installation          {{{1
+##############################################################################
+
+LangString vim_readme_file 0 "README.txt"
+#LangString vim_readme_file ${LANG_SERBIAN} "README.sr.txt"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_SERBIAN} \
+#    "Destination Folder (Must end with $\"vim$\")"
+
+LangString str_show_readme          ${LANG_SERBIAN} \
+    "Прикажи ПРОЧИТАЈМЕ када се заврши инсталација"
+
+# Install types:
+LangString str_type_typical         ${LANG_SERBIAN} \
+    "Типична"
+
+LangString str_type_minimal         ${LANG_SERBIAN} \
+    "Минимална"
+
+LangString str_type_full            ${LANG_SERBIAN} \
+    "Пуна"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_SERBIAN} \
+    "Уклањање постојећ(е/их) верзиј(е/а)"
+LangString str_desc_old_ver         ${LANG_SERBIAN} \
+    "Уклања постојећ(у/е) Vim верзииј(у/е) из вашег система."
+
+LangString str_section_exe          ${LANG_SERBIAN} \
+    "Vim ГКИ и фајлови потребни за извршавање"
+LangString str_desc_exe             ${LANG_SERBIAN} \
+    "Vim ГКИ извршни фајлови и фајлови потребни током извршавања. Ова компонента је неопходна."
+
+LangString str_section_console      ${LANG_SERBIAN} \
+    "Vim конзолни програм"
+LangString str_desc_console         ${LANG_SERBIAN} \
+    "Конзолна верзија програма Vim (vim.exe)."
+
+LangString str_section_batch        ${LANG_SERBIAN} \
+    "Креирај .bat фајлове"
+LangString str_desc_batch           ${LANG_SERBIAN} \
+    "Креира у Windows директоријуму .bat фајлове за Vim варијанте \
+     у циљу коришћења из командне линије."
+
+LangString str_group_icons          ${LANG_SERBIAN} \
+    "Креирај иконе за Vim"
+LangString str_desc_icons           ${LANG_SERBIAN} \
+    "Креира иконе за Vim на различитим местима, како би се олакшао приступ."
+
+LangString str_section_desktop      ${LANG_SERBIAN} \
+    "На радној површини"
+LangString str_desc_desktop         ${LANG_SERBIAN} \
+    "Креира иконе за gVim извршне фајлове на радној површини."
+
+LangString str_section_start_menu   ${LANG_SERBIAN} \
+    "У фасцикли Програми унутар Старт менија"
+LangString str_desc_start_menu      ${LANG_SERBIAN} \
+    "Додаје Vim у фолдер Програми Старт менија."
+
+#LangString str_section_quick_launch ${LANG_SERBIAN} \
+#    "In the Quick Launch Bar"
+#LangString str_desc_quick_launch    ${LANG_SERBIAN} \
+#    "Add Vim shortcut in the quick launch bar."
+
+LangString str_section_edit_with    ${LANG_SERBIAN} \
+    "Додај Vim контекстни мени"
+LangString str_desc_edit_with       ${LANG_SERBIAN} \
+    "Додаје Vim у $\"Отвори помоћу...$\" листу контекстног менија."
+
+#LangString str_section_edit_with32  ${LANG_SERBIAN} \
+#    "32-bit Version"
+#LangString str_desc_edit_with32     ${LANG_SERBIAN} \
+#    "Add Vim to the $\"Open With...$\" context menu list \
+#     for 32-bit applications."
+
+#LangString str_section_edit_with64  ${LANG_SERBIAN} \
+#    "64-bit Version"
+#LangString str_desc_edit_with64     ${LANG_SERBIAN} \
+#    "Add Vim to the $\"Open With...$\" context menu list \
+#     for 64-bit applications."
+
+LangString str_section_vim_rc       ${LANG_SERBIAN} \
+    "Креирај Подразумевану конфигурацију"
+LangString str_desc_vim_rc          ${LANG_SERBIAN} \
+    "Креира подразумевани конфиг фајл (_vimrc) ако неки већ не постоји."
+
+LangString str_group_plugin         ${LANG_SERBIAN} \
+    "Креира директоријуме додатака"
+LangString str_desc_plugin          ${LANG_SERBIAN} \
+    "Креира директоријуме додатака. Ови директоријуми омогућавају проширење програма Vim \
+     убацивањем фајла у директоријум."
+
+LangString str_section_plugin_home  ${LANG_SERBIAN} \
+    "Приватне"
+LangString str_desc_plugin_home     ${LANG_SERBIAN} \
+    "Креира директоријуме додатака у HOME директоријуму."
+
+LangString str_section_plugin_vim   ${LANG_SERBIAN} \
+    "Дељене"
+LangString str_desc_plugin_vim      ${LANG_SERBIAN} \
+    "Креира директоријуме додатака у Vim инсталационом директоријуму, користе их сви \
+     на систему."
+
+LangString str_section_nls          ${LANG_SERBIAN} \
+    "Подршка за домаћи језик"
+LangString str_desc_nls             ${LANG_SERBIAN} \
+    "Инсталира фајлове за домаћу језичку подршку."
+
+LangString str_unsection_register   ${LANG_SERBIAN} \
+    "Поништи регистрацију Vim"
+LangString str_desc_unregister      ${LANG_SERBIAN} \
+    "Поништава регистрацију програма Vim на систему."
+
+LangString str_unsection_exe        ${LANG_SERBIAN} \
+    "Уклони Vim извршне фајлове/фајлове потребне у време извршавања"
+LangString str_desc_rm_exe          ${LANG_SERBIAN} \
+    "Уклања све Vim извршне фајлове и оне потребне у време извршавања."
+
+LangString str_ungroup_plugin       ${LANG_SERBIAN} \
+    "Укони директоријуме додатака"
+LangString str_desc_rm_plugin       ${LANG_SERBIAN} \
+    "Уклања директоријуме додатака ако су празни."
+
+LangString str_unsection_plugin_home ${LANG_SERBIAN} \
+    "Приватне"
+LangString str_desc_rm_plugin_home  ${LANG_SERBIAN} \
+    "Уклања директоријуме додатака из HOME директоријума."
+
+LangString str_unsection_plugin_vim ${LANG_SERBIAN} \
+    "Дељене"
+LangString str_desc_rm_plugin_vim   ${LANG_SERBIAN} \
+    "Уклања директоријуме додатака из Vim инсталациониг директоријума."
+
+LangString str_unsection_rootdir    ${LANG_SERBIAN} \
+    "Уклони Vim корени директоријум"
+LangString str_desc_rm_rootdir      ${LANG_SERBIAN} \
+    "Уклања Vim корени директоријум. Он садржи ваше Vim конфигурационе фајлове!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_SERBIAN} \
+#    "Found $vim_old_ver_count Vim versions on your system.$\r$\n\
+#     This installer can only handle ${VIM_MAX_OLD_VER} versions \
+#     at most.$\r$\n\
+#     Please remove some versions and start again."
+
+#LangString str_msg_invalid_root  ${LANG_SERBIAN} \
+#    "Invalid install path: $vim_install_root!$\r$\n\
+#     It should end with $\"vim$\"."
+
+#LangString str_msg_bin_mismatch  ${LANG_SERBIAN} \
+#    "Binary path mismatch!$\r$\n$\r$\n\
+#     Expect the binary path to be $\"$vim_bin_path$\",$\r$\n\
+#     but system indicates the binary path is $\"$INSTDIR$\"."
+
+#LangString str_msg_vim_running   ${LANG_SERBIAN} \
+#    "Vim is still running on your system.$\r$\n\
+#     Please close all instances of Vim before you continue."
+
+#LangString str_msg_register_ole  ${LANG_SERBIAN} \
+#    "Attempting to register Vim with OLE. \
+#     There is no message indicates whether this works or not."
+
+#LangString str_msg_unreg_ole     ${LANG_SERBIAN} \
+#    "Attempting to unregister Vim with OLE. \
+#     There is no message indicates whether this works or not."
+
+#LangString str_msg_rm_start      ${LANG_SERBIAN} \
+#    "Uninstalling the following version:"
+
+#LangString str_msg_rm_fail       ${LANG_SERBIAN} \
+#    "Fail to uninstall the following version:"
+
+#LangString str_msg_no_rm_key     ${LANG_SERBIAN} \
+#    "Cannot find uninstaller registry key."
+
+#LangString str_msg_no_rm_reg     ${LANG_SERBIAN} \
+#    "Cannot find uninstaller from registry."
+
+#LangString str_msg_no_rm_exe     ${LANG_SERBIAN} \
+#    "Cannot access uninstaller."
+
+#LangString str_msg_rm_copy_fail  ${LANG_SERBIAN} \
+#    "Fail to copy uninstaller to temporary directory."
+
+#LangString str_msg_rm_run_fail   ${LANG_SERBIAN} \
+#    "Fail to run uninstaller."
+
+#LangString str_msg_abort_install ${LANG_SERBIAN} \
+#    "Installer will abort."
+
+LangString str_msg_install_fail  ${LANG_SERBIAN} \
+    "Инсталација није успела. Више среће идући пут."
+
+LangString str_msg_rm_exe_fail   ${LANG_SERBIAN} \
+    "Неки фајлови у $0 нису обрисани!$\r$\n\
+     Морате то ручно да обавите."
+
+#LangString str_msg_rm_root_fail  ${LANG_SERBIAN} \
+#    "WARNING: Cannot remove $\"$vim_install_root$\", it is not empty!"
+
+LangString str_msg_uninstalling  ${LANG_SERBIAN} \
+    "Уклањање старе верзије..."
+
+LangString str_msg_registering   ${LANG_SERBIAN} \
+    "Регистровање..."
+
+LangString str_msg_unregistering ${LANG_SERBIAN} \
+    "Поништавање регистрације..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_SERBIAN} \
+    "Изаберите _vimrc подешавања"
+LangString str_vimrc_page_subtitle ${LANG_SERBIAN} \
+    "Изаберите подешавања за побољшања, тастатуру и миша."
+
+LangString str_msg_compat_title    ${LANG_SERBIAN} \
+    " Vi / Vim понашање "
+LangString str_msg_compat_desc     ${LANG_SERBIAN} \
+    "&Компатибилност и побољшања"
+LangString str_msg_compat_vi       ${LANG_SERBIAN} \
+    "Vi компатибилно"
+LangString str_msg_compat_vim      ${LANG_SERBIAN} \
+    "Vim оригинално"
+LangString str_msg_compat_defaults ${LANG_SERBIAN} \
+    "Vim са неким побољшањима (учитава defaults.vim)"
+LangString str_msg_compat_all      ${LANG_SERBIAN} \
+    "Vim са свим побољшањима (учитава vimrc_example.vim) (Подразумевано)"
+
+LangString str_msg_keymap_title   ${LANG_SERBIAN} \
+    " Мапирања "
+LangString str_msg_keymap_desc    ${LANG_SERBIAN} \
+    "&Ремапира неколико тастера за Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, итд.)"
+LangString str_msg_keymap_default ${LANG_SERBIAN} \
+    "Немој да ремапираш тастере (Подразумевано)"
+LangString str_msg_keymap_windows ${LANG_SERBIAN} \
+    "Ремапира неколико тастера"
+
+LangString str_msg_mouse_title   ${LANG_SERBIAN} \
+    " Миш "
+LangString str_msg_mouse_desc    ${LANG_SERBIAN} \
+    "&Понашање левог и десног тастера"
+LangString str_msg_mouse_default ${LANG_SERBIAN} \
+    "Десни: искачући мени, Леви: визуелни режим (Подразумевано)"
+LangString str_msg_mouse_windows ${LANG_SERBIAN} \
+    "Десни: искачући мени, Леви: режим избора (Windows)"
+LangString str_msg_mouse_unix    ${LANG_SERBIAN} \
+    "Десни: проширује избор, Леви: визуелни режим (Unix)"

nsis/lang/simpchinese.nsi

@@ -0,0 +1,288 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# simpchinese.nsi: Simplified Chinese language strings for gvim NSIS
+# installer.
+#
+# Locale ID    : 2052
+# Locale Name  : cn
+# fileencoding : UTF-8
+# Author       : Guopeng Wen, David Liu
+
+!insertmacro MUI_LANGUAGE "SimpChinese"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_SIMPCHINESE} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_SIMPCHINESE} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# Translated license file for the license page                            {{{1
+##############################################################################
+
+LicenseLangString page_lic_file 0 "..\lang\LICENSE.nsis.txt"
+#LicenseLangString page_lic_file ${LANG_SIMPCHINESE} \
+#        "..\lang\LICENSE.zh_cn.nsis.txt"
+
+##############################################################################
+# Translated README.txt file, which is opened after installation          {{{1
+##############################################################################
+
+LangString vim_readme_file 0 "README.txt"
+#LangString vim_readme_file ${LANG_SIMPCHINESE} "README.zh_cn.txt"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_SIMPCHINESE} \
+#    "安装路径 (必须以 vim 结尾)"
+
+LangString str_show_readme          ${LANG_SIMPCHINESE} \
+    "安装完成后显示 README 文件"
+
+# Install types:
+LangString str_type_typical         ${LANG_SIMPCHINESE} \
+    "典型安装"
+
+LangString str_type_minimal         ${LANG_SIMPCHINESE} \
+    "最小安装"
+
+LangString str_type_full            ${LANG_SIMPCHINESE} \
+    "完全安装"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_SIMPCHINESE} \
+    "卸载旧版本"
+LangString str_desc_old_ver         ${LANG_SIMPCHINESE} \
+    "卸载系统上已存在的 Vim 版本"
+
+LangString str_section_exe          ${LANG_SIMPCHINESE} \
+    "安装 Vim 图形界面"
+LangString str_desc_exe             ${LANG_SIMPCHINESE} \
+    "安装 Vim 图形界面及运行时文件。此项为必选。"
+
+LangString str_section_console      ${LANG_SIMPCHINESE} \
+    "安装 Vim 控制台版本"
+LangString str_desc_console         ${LANG_SIMPCHINESE} \
+    "安装 Vim 的控制台版本（vim.exe）。"
+
+LangString str_section_batch        ${LANG_SIMPCHINESE} \
+    "安装批处理文件"
+LangString str_desc_batch           ${LANG_SIMPCHINESE} \
+    "为 Vim 的各种变体创建批处理文件，以便在命令行下运行 Vim。"
+
+LangString str_group_icons          ${LANG_SIMPCHINESE} \
+    "创建图标"
+LangString str_desc_icons           ${LANG_SIMPCHINESE} \
+    "为 Vim 创建若干图标，以方便使用 Vim。"
+
+LangString str_section_desktop      ${LANG_SIMPCHINESE} \
+    "桌面图标"
+LangString str_desc_desktop         ${LANG_SIMPCHINESE} \
+    "创建 Vim 的桌面快捷方式图标。"
+
+LangString str_section_start_menu   ${LANG_SIMPCHINESE} \
+    "「开始」菜单程序组"
+LangString str_desc_start_menu      ${LANG_SIMPCHINESE} \
+    "在开始菜单中添加 Vim 程序组（适用于 Windows 95 及以上版本）"
+
+#LangString str_section_quick_launch ${LANG_SIMPCHINESE} \
+#    "在快速启动启动栏中"
+#LangString str_desc_quick_launch    ${LANG_SIMPCHINESE} \
+#    "在快速启动栏中添加 Vim 图标。"
+
+LangString str_section_edit_with    ${LANG_SIMPCHINESE} \
+    "添加到快捷菜单"
+LangString str_desc_edit_with       ${LANG_SIMPCHINESE} \
+    "将“用 Vim 编辑”添加到快捷菜单中。"
+
+#LangString str_section_edit_with32  ${LANG_SIMPCHINESE} \
+#    "32 位版本"
+#LangString str_desc_edit_with32     ${LANG_SIMPCHINESE} \
+#    "将 Vim 添加到 32 位程序的“打开方式”快捷菜单中。"
+
+#LangString str_section_edit_with64  ${LANG_SIMPCHINESE} \
+#    "64 位版本"
+#LangString str_desc_edit_with64     ${LANG_SIMPCHINESE} \
+#    "将 Vim 添加到 64 位程序的“打开方式”快捷菜单中。"
+
+LangString str_section_vim_rc       ${LANG_SIMPCHINESE} \
+    "创建默认配置文件"
+LangString str_desc_vim_rc          ${LANG_SIMPCHINESE} \
+    "在安装目录下生成默认的 Vim 配置文件(_vimrc)。\
+     如果该文件已经存在，则跳过该项。"
+
+LangString str_group_plugin         ${LANG_SIMPCHINESE} \
+    "创建插件目录"
+LangString str_desc_plugin          ${LANG_SIMPCHINESE} \
+    "创建(空的)插件目录结构。插件目录用于安装 Vim 扩展插件，\
+     只要将文件复制到相关的子目录中即可。"
+
+LangString str_section_plugin_home  ${LANG_SIMPCHINESE} \
+    "私有插件目录"
+LangString str_desc_plugin_home     ${LANG_SIMPCHINESE} \
+    "在主目录创建私有插件目录。"
+
+LangString str_section_plugin_vim   ${LANG_SIMPCHINESE} \
+    "公共插件目录"
+LangString str_desc_plugin_vim      ${LANG_SIMPCHINESE} \
+    "在 Vim 安装目录下创建(空的)插件目录结构，系统上所有用户都能使用安装在\
+     该目录下的扩展插件。"
+
+LangString str_section_nls          ${LANG_SIMPCHINESE} \
+    "安装多语言支持"
+LangString str_desc_nls             ${LANG_SIMPCHINESE} \
+    "安装用于多语言支持的文件。"
+
+LangString str_unsection_register   ${LANG_SIMPCHINESE} \
+    "删除 Vim 系统配置"
+LangString str_desc_unregister      ${LANG_SIMPCHINESE} \
+    "删除和 Vim 相关的系统配置。"
+
+LangString str_unsection_exe        ${LANG_SIMPCHINESE} \
+    "删除 Vim 执行文件以及脚本"
+LangString str_desc_rm_exe          ${LANG_SIMPCHINESE} \
+    "删除 Vim 的所有执行文件及脚本。"
+
+LangString str_ungroup_plugin       ${LANG_SIMPCHINESE} \
+    "移除插件目录"
+LangString str_desc_rm_plugin       ${LANG_SIMPCHINESE} \
+    "移除插件目录（如果目录为空）。"
+
+LangString str_unsection_plugin_home ${LANG_SIMPCHINESE} \
+    "私有插件目录"
+LangString str_desc_rm_plugin_home  ${LANG_SIMPCHINESE} \
+    "从主目录中移除私有插件目录。"
+
+LangString str_unsection_plugin_vim ${LANG_SIMPCHINESE} \
+    "公共插件目录"
+LangString str_desc_rm_plugin_vim   ${LANG_SIMPCHINESE} \
+    "从 Vim 安装目录下移除插件目录。"
+
+LangString str_unsection_rootdir    ${LANG_SIMPCHINESE} \
+    "移除 Vim 主目录"
+LangString str_desc_rm_rootdir      ${LANG_SIMPCHINESE} \
+    "移除 Vim 的主目录，该目录包含您的配置文件！"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_SIMPCHINESE} \
+#    "您的系统上安装了 $vim_old_ver_count 个不同版本的 Vim，$\r$\n\
+#     但本安装程序最多只能处理 ${VIM_MAX_OLD_VER} 个版本。$\r$\n\
+#     请您手工删除一些旧版本以后再运行本安装程序。"
+
+#LangString str_msg_invalid_root  ${LANG_SIMPCHINESE} \
+#    "安装路径“$vim_install_root”无效！$\r$\n\
+#     该路径必须以 vim 结尾。"
+
+#LangString str_msg_bin_mismatch  ${LANG_SIMPCHINESE} \
+#    "Vim 执行程序安装路径异常！$\r$\n$\r$\n\
+#     该版本 Vim 的执行程序安装路径应该是“$vim_bin_path”,$\r$\n\
+#     而系统却指示该路径为“$INSTDIR”。"
+
+#LangString str_msg_vim_running   ${LANG_SIMPCHINESE} \
+#    "您的系统上仍有 Vim 在运行，$\r$\n\
+#     请您在执行后续步骤前退出这些 Vim。"
+
+#LangString str_msg_register_ole  ${LANG_SIMPCHINESE} \
+#    "试图注册 Vim OLE 服务器。请注意无论成功与否都不再显示进一步的信息。"
+
+#LangString str_msg_unreg_ole     ${LANG_SIMPCHINESE} \
+#    "试图注销 Vim OLE 服务器。请注意无论成功与否都不再显示进一步的信息。"
+
+#LangString str_msg_rm_start      ${LANG_SIMPCHINESE} \
+#    "开始卸载以下版本："
+
+#LangString str_msg_rm_fail       ${LANG_SIMPCHINESE} \
+#    "以下版本卸载失败："
+
+#LangString str_msg_no_rm_key     ${LANG_SIMPCHINESE} \
+#    "找不到卸载程序的注册表键。"
+
+#LangString str_msg_no_rm_reg     ${LANG_SIMPCHINESE} \
+#    "在注册表中未找到卸载程序路径。"
+
+#LangString str_msg_no_rm_exe     ${LANG_SIMPCHINESE} \
+#    "找不到卸载程序。"
+
+#LangString str_msg_rm_copy_fail  ${LANG_SIMPCHINESE} \
+#    "无法将卸载程序复制到临时目录。"
+
+#LangString str_msg_rm_run_fail   ${LANG_SIMPCHINESE} \
+#    "执行卸载程序失败。"
+
+#LangString str_msg_abort_install ${LANG_SIMPCHINESE} \
+#    "安装程序将退出。"
+
+LangString str_msg_install_fail  ${LANG_SIMPCHINESE} \
+    "安装失败。祝您下次好运。"
+
+LangString str_msg_rm_exe_fail   ${LANG_SIMPCHINESE} \
+    "目录“$0”下有部分文件删除失败！$\r$\n\
+     您只能手工删除该目录。"
+
+#LangString str_msg_rm_root_fail  ${LANG_SIMPCHINESE} \
+#    "警告：无法删除 Vim 安装目录“$vim_install_root”，\
+#     该目录下仍有其他文件。"
+
+LangString str_msg_uninstalling  ${LANG_SIMPCHINESE} \
+    "正在卸载旧版本..."
+
+LangString str_msg_registering   ${LANG_SIMPCHINESE} \
+    "正在注册..."
+
+LangString str_msg_unregistering ${LANG_SIMPCHINESE} \
+    "正在取消注册..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_SIMPCHINESE} \
+    "设置 _vimrc"
+LangString str_vimrc_page_subtitle ${LANG_SIMPCHINESE} \
+    "选择键盘、鼠标和扩展设置。"
+
+LangString str_msg_compat_title    ${LANG_SIMPCHINESE} \
+    "Vi / Vim 行为"
+LangString str_msg_compat_desc     ${LANG_SIMPCHINESE} \
+    "兼容性与扩展(&B)"
+LangString str_msg_compat_vi       ${LANG_SIMPCHINESE} \
+    "原始 Vi"
+LangString str_msg_compat_vim      ${LANG_SIMPCHINESE} \
+    "原始 Vim"
+LangString str_msg_compat_defaults ${LANG_SIMPCHINESE} \
+    "Vim 原始版本和部分扩展 (加载 defaults.vim)"
+LangString str_msg_compat_all      ${LANG_SIMPCHINESE} \
+    "Vim 原始版本和所有扩展 (加载 vimrc_example.vim) (缺省)"
+
+LangString str_msg_keymap_title   ${LANG_SIMPCHINESE} \
+    "键盘映射"
+LangString str_msg_keymap_desc    ${LANG_SIMPCHINESE} \
+    "为 Windows 映射按键(&R) (例如:Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F 等)"
+LangString str_msg_keymap_default ${LANG_SIMPCHINESE} \
+    "不映射按键 (缺省)"
+LangString str_msg_keymap_windows ${LANG_SIMPCHINESE} \
+    "映射一些按键"
+
+LangString str_msg_mouse_title   ${LANG_SIMPCHINESE} \
+    "鼠标"
+LangString str_msg_mouse_desc    ${LANG_SIMPCHINESE} \
+    "左键和右键行为(&B)"
+LangString str_msg_mouse_default ${LANG_SIMPCHINESE} \
+    "右键：弹出菜单, 左键：可视化模式 (缺省)"
+LangString str_msg_mouse_windows ${LANG_SIMPCHINESE} \
+    "右键：弹出菜单, 左键:选择模式 (Windows)"
+LangString str_msg_mouse_unix    ${LANG_SIMPCHINESE} \
+    "右键： 扩展选择, 左键：可视化模式 (Unix)"

nsis/lang/tradchinese.nsi

@@ -0,0 +1,289 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# tradchinese.nsi: Traditional Chinese language strings for gvim NSIS
+# installer.
+#
+# Locale ID    : 1028
+# Locale Name  : tw
+# fileencoding : UTF-8
+# Author       : Guopeng Wen
+
+!insertmacro MUI_LANGUAGE "TradChinese"
+
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_TRADCHINESE} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_TRADCHINESE} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# Translated license file for the license page                            {{{1
+##############################################################################
+
+LicenseLangString page_lic_file 0 "..\lang\LICENSE.nsis.txt"
+#LicenseLangString page_lic_file ${LANG_TRADCHINESE} \
+#        "..\lang\LICENSE.zh_tw.nsis.txt"
+
+##############################################################################
+# Translated README.txt file, which is opened after installation          {{{1
+##############################################################################
+
+LangString vim_readme_file 0 "README.txt"
+#LangString vim_readme_file ${LANG_TRADCHINESE} "README.zh_tw.txt"
+
+##############################################################################
+# MUI Configuration Strings                                               {{{1
+##############################################################################
+
+#LangString str_dest_folder          ${LANG_TRADCHINESE} \
+#    "安裝資料夾 (必須以 vim 結尾)"
+
+LangString str_show_readme          ${LANG_TRADCHINESE} \
+    "安裝完成後顯示 README 檔案"
+
+# Install types:
+LangString str_type_typical         ${LANG_TRADCHINESE} \
+    "典型安裝"
+
+LangString str_type_minimal         ${LANG_TRADCHINESE} \
+    "最小安裝"
+
+LangString str_type_full            ${LANG_TRADCHINESE} \
+    "完全安裝"
+
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_TRADCHINESE} \
+    "移除舊版本"
+LangString str_desc_old_ver         ${LANG_TRADCHINESE} \
+    "移除閣下電腦上舊版本的 Vim。"
+
+LangString str_section_exe          ${LANG_TRADCHINESE} \
+    "安裝 Vim 圖形界面程式"
+LangString str_desc_exe             ${LANG_TRADCHINESE} \
+    "安裝 Vim 圖形界面程式及腳本。此為必選安裝。"
+
+LangString str_section_console      ${LANG_TRADCHINESE} \
+    "安裝 Vim 命令行程式"
+LangString str_desc_console         ${LANG_TRADCHINESE} \
+    "安裝 Vim 命令行程式 (vim.exe)。該程式在控制臺窗口中運行。"
+
+LangString str_section_batch        ${LANG_TRADCHINESE} \
+    "安裝批次檔案"
+LangString str_desc_batch           ${LANG_TRADCHINESE} \
+    "為 Vim 的各種變體創建批次檔，以便在命令行下啟動 Vim。"
+
+LangString str_group_icons          ${LANG_TRADCHINESE} \
+    "建立 Vim 圖示"
+LangString str_desc_icons           ${LANG_TRADCHINESE} \
+    "建立若干 Vim 圖示，以便于使用 Vim。"
+
+LangString str_section_desktop      ${LANG_TRADCHINESE} \
+    "於桌面"
+LangString str_desc_desktop         ${LANG_TRADCHINESE} \
+    "建立若干 Vim 圖示於桌面上，以方便啟動 Vim。"
+
+LangString str_section_start_menu   ${LANG_TRADCHINESE} \
+    "於「開始」功能表的「程式」集"
+LangString str_desc_start_menu      ${LANG_TRADCHINESE} \
+    "在「開始」功能表的「程式」集中建立 Vim 啟動組。\
+     適用于 Windows 95 及以上版本。"
+
+#LangString str_section_quick_launch ${LANG_TRADCHINESE} \
+#    "於快速啟動列"
+#LangString str_desc_quick_launch    ${LANG_TRADCHINESE} \
+#    "在快速啟動列中建立 Vim 圖示。"
+
+LangString str_section_edit_with    ${LANG_TRADCHINESE} \
+    "安裝快捷選單"
+LangString str_desc_edit_with       ${LANG_TRADCHINESE} \
+    "在「打開方式」快捷選單中添加 Vim 項。"
+
+#LangString str_section_edit_with32  ${LANG_TRADCHINESE} \
+#    "32 位元版本"
+#LangString str_desc_edit_with32     ${LANG_TRADCHINESE} \
+#    "在 32 位元程式的「打開方式」快捷選單中添加 Vim 項。"
+
+#LangString str_section_edit_with64  ${LANG_TRADCHINESE} \
+#    "64 位元版本"
+#LangString str_desc_edit_with64     ${LANG_TRADCHINESE} \
+#    "在 64 位元程式的「打開方式」快捷選單中添加 Vim 項。"
+
+LangString str_section_vim_rc       ${LANG_TRADCHINESE} \
+    "建立默認設定檔"
+LangString str_desc_vim_rc          ${LANG_TRADCHINESE} \
+    "在安裝資料夾下建立默認的 Vim 設定檔(_vimrc)。\
+     若該設定檔已經存在，則略過此項。"
+
+LangString str_group_plugin         ${LANG_TRADCHINESE} \
+    "建立插件資料夾"
+LangString str_desc_plugin          ${LANG_TRADCHINESE} \
+    "建立(空的)插件資料夾結構。插件資料夾用于安裝 Vim 的擴展插件，\
+     只要將檔案復制到相關的子資料夾中即可。"
+
+LangString str_section_plugin_home  ${LANG_TRADCHINESE} \
+    "建立插件資料夾"
+LangString str_desc_plugin_home     ${LANG_TRADCHINESE} \
+    "Create plugin directories in HOME directory."
+
+LangString str_section_plugin_vim   ${LANG_TRADCHINESE} \
+    "建立共享插件資料夾"
+LangString str_desc_plugin_vim      ${LANG_TRADCHINESE} \
+    "在 Vim 安裝資料夾下建立(空的)插件資料夾結構，電腦上所有用戶都能使用安裝\
+     在該資料夾里的擴展插件。"
+
+LangString str_section_nls          ${LANG_TRADCHINESE} \
+    "安裝本地語言支持"
+LangString str_desc_nls             ${LANG_TRADCHINESE} \
+    "安裝用于支持本地語言的檔案。"
+
+LangString str_unsection_register   ${LANG_TRADCHINESE} \
+    "移除 Vim 系統設定"
+LangString str_desc_unregister      ${LANG_TRADCHINESE} \
+    "移除與 Vim 相關的系統設定。"
+
+LangString str_unsection_exe        ${LANG_TRADCHINESE} \
+    "移除 Vim 程式及腳本"
+LangString str_desc_rm_exe          ${LANG_TRADCHINESE} \
+    "移除所有的 Vim 程式及腳本。"
+
+LangString str_ungroup_plugin       ${LANG_TRADCHINESE} \
+    "Remove plugin directories"
+LangString str_desc_rm_plugin       ${LANG_TRADCHINESE} \
+    "Remove the plugin directories if they are empty."
+
+LangString str_unsection_plugin_home ${LANG_TRADCHINESE} \
+    "Private"
+LangString str_desc_rm_plugin_home  ${LANG_TRADCHINESE} \
+    "Remove the vimfiles directory in HOME directory."
+
+LangString str_unsection_plugin_vim ${LANG_TRADCHINESE} \
+    "Shared"
+LangString str_desc_rm_plugin_vim   ${LANG_TRADCHINESE} \
+    "Remove the vimfiles directory in Vim install directory."
+
+LangString str_unsection_rootdir    ${LANG_TRADCHINESE} \
+    "Remove the Vim root directory"
+LangString str_desc_rm_rootdir      ${LANG_TRADCHINESE} \
+    "Remove the Vim root directory. It contains your Vim configuration files!"
+
+
+##############################################################################
+# Messages                                                                {{{1
+##############################################################################
+
+#LangString str_msg_too_many_ver  ${LANG_TRADCHINESE} \
+#    "閣下的電腦上安裝了 $vim_old_ver_count 個不同版本的 Vim，$\r$\n\
+#     但是本安裝程式最多只能處理 ${VIM_MAX_OLD_VER} 個版本。$\r$\n\
+#     煩請閣下手工移除一些版本以后再運行本安裝程式。"
+
+#LangString str_msg_invalid_root  ${LANG_TRADCHINESE} \
+#    "安裝資料夾「$vim_install_root」無效！$\r$\n\
+#     該資料夾必須以「vim」結尾。"
+
+#LangString str_msg_bin_mismatch  ${LANG_TRADCHINESE} \
+#    "Vim 執行程式安裝路徑異常！$\r$\n$\r$\n\
+#     該版本 Vim 的執行程式安裝路徑應該是「$vim_bin_path」,$\r$\n\
+#     而系統卻指示該路徑為「$INSTDIR」。"
+
+#LangString str_msg_vim_running   ${LANG_TRADCHINESE} \
+#    "閣下的電腦上尚有正在運行之 Vim，$\r$\n\
+#     煩請閣下在執行后續步驟前將其全部退出。"
+
+#LangString str_msg_register_ole  ${LANG_TRADCHINESE} \
+#    "試圖注冊 Vim OLE 伺服程式。請注意不論成功與否都不再顯示進一步的信息。"
+
+#LangString str_msg_unreg_ole     ${LANG_TRADCHINESE} \
+#    "試圖注銷 Vim OLE 伺服程式。請注意不論成功與否都不再顯示進一步的信息。"
+
+#LangString str_msg_rm_start      ${LANG_TRADCHINESE} \
+#    "正移除如下版本："
+
+#LangString str_msg_rm_fail       ${LANG_TRADCHINESE} \
+#    "以下版本移除失敗："
+
+#LangString str_msg_no_rm_key     ${LANG_TRADCHINESE} \
+#    "找不到反安裝程式的登錄檔入口。"
+
+#LangString str_msg_no_rm_reg     ${LANG_TRADCHINESE} \
+#    "在登錄檔中未找到反安裝程式路徑。"
+
+#LangString str_msg_no_rm_exe     ${LANG_TRADCHINESE} \
+#    "找不到反安裝程式。"
+
+#LangString str_msg_rm_copy_fail  ${LANG_TRADCHINESE} \
+#    "無法將法將反安裝程式复制到臨時目錄。"
+
+#LangString str_msg_rm_run_fail   ${LANG_TRADCHINESE} \
+#    "執行反安裝程式失敗。"
+
+#LangString str_msg_abort_install ${LANG_TRADCHINESE} \
+#    "安裝程式將退出。"
+
+LangString str_msg_install_fail  ${LANG_TRADCHINESE} \
+    "安裝失敗。預祝下次好運。"
+
+LangString str_msg_rm_exe_fail   ${LANG_TRADCHINESE} \
+    "資料夾「$0」下有部分檔案未能移除！$\r$\n\
+     閣下只能手工移除該資料夾。"
+
+#LangString str_msg_rm_root_fail  ${LANG_TRADCHINESE} \
+#    "警告：無法刪除 Vim 安裝資料夾「$vim_install_root」，\
+#     該資料夾下仍有其他檔案。"
+
+LangString str_msg_uninstalling  ${LANG_TRADCHINESE} \
+    "Uninstalling the old version..."
+
+LangString str_msg_registering   ${LANG_TRADCHINESE} \
+    "Registering..."
+
+LangString str_msg_unregistering ${LANG_TRADCHINESE} \
+    "Unregistering..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_TRADCHINESE} \
+    "Choose _vimrc settings"
+LangString str_vimrc_page_subtitle ${LANG_TRADCHINESE} \
+    "Choose the settings for enhancement, keyboard and mouse."
+
+LangString str_msg_compat_title    ${LANG_TRADCHINESE} \
+    " Vi / Vim behavior "
+LangString str_msg_compat_desc     ${LANG_TRADCHINESE} \
+    "&Compatibility and enhancements"
+LangString str_msg_compat_vi       ${LANG_TRADCHINESE} \
+    "Vi compatible"
+LangString str_msg_compat_vim      ${LANG_TRADCHINESE} \
+    "Vim original"
+LangString str_msg_compat_defaults ${LANG_TRADCHINESE} \
+    "Vim with some enhancements (load defaults.vim)"
+LangString str_msg_compat_all      ${LANG_TRADCHINESE} \
+    "Vim with all enhancements (load vimrc_example.vim) (Default)"
+
+LangString str_msg_keymap_title   ${LANG_TRADCHINESE} \
+    " Mappings "
+LangString str_msg_keymap_desc    ${LANG_TRADCHINESE} \
+    "&Remap a few keys for Windows (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+LangString str_msg_keymap_default ${LANG_TRADCHINESE} \
+    "Do not remap keys (Default)"
+LangString str_msg_keymap_windows ${LANG_TRADCHINESE} \
+    "Remap a few keys"
+
+LangString str_msg_mouse_title   ${LANG_TRADCHINESE} \
+    " Mouse "
+LangString str_msg_mouse_desc    ${LANG_TRADCHINESE} \
+    "&Behavior of right and left buttons"
+LangString str_msg_mouse_default ${LANG_TRADCHINESE} \
+    "Right: popup menu, Left: visual mode (Default)"
+LangString str_msg_mouse_windows ${LANG_TRADCHINESE} \
+    "Right: popup menu, Left: select mode (Windows)"
+LangString str_msg_mouse_unix    ${LANG_TRADCHINESE} \
+    "Right: extends selection, Left: visual mode (Unix)"

nsis/lang/turkish.nsi

@@ -0,0 +1,206 @@
+# vi:set ts=8 sts=4 sw=4 et fdm=marker:
+#
+# turkish.nsi: Turkish language strings for gvim NSIS installer.
+#
+# Locale ID    : 1055
+# Locale Name  : tr
+# fileencoding : UTF-8
+# Author       : Emir SARI
+
+!insertmacro MUI_LANGUAGE "Turkish"
+
+# Overwrite the default translation.
+# These strings should be always English.  Otherwise dosinst.c fails.
+LangString ^SetupCaption     ${LANG_TURKISH} \
+        "$(^Name) Setup"
+LangString ^UninstallCaption ${LANG_TURKISH} \
+        "$(^Name) Uninstall"
+
+##############################################################################
+# Translated license file for the license page                            {{{1
+##############################################################################
+
+LicenseLangString page_lic_file 0 "..\lang\LICENSE.nsis.txt"
+#LicenseLangString page_lic_file ${LANG_TURKISH} "..\lang\LICENSE.tr.nsis.txt"
+
+##############################################################################
+# Translated README.txt file, which is opened after installation          {{{1
+##############################################################################
+
+LangString vim_readme_file 0 "README.txt"
+#LangString vim_readme_file ${LANG_TURKISH} "README.tr.txt"
+
+##############################################################################
+
+LangString str_show_readme          ${LANG_TURKISH} \
+    "Kurulum bittikten sonra README dosyasını aç"
+
+# Install types:
+LangString str_type_typical         ${LANG_TURKISH} \
+    "Normal"
+
+LangString str_type_minimal         ${LANG_TURKISH} \
+    "Küçük"
+
+LangString str_type_full            ${LANG_TURKISH} \
+    "Tam"
+
+##############################################################################
+# Section Titles & Description                                            {{{1
+##############################################################################
+
+LangString str_section_old_ver      ${LANG_TURKISH} \
+    "Eski sürümü kaldır"
+LangString str_desc_old_ver         ${LANG_TURKISH} \
+    "Vim'in eski sürümünü sisteminizden kaldırır."
+
+LangString str_section_exe          ${LANG_TURKISH} \
+    "Vim grafik arabirimi ve çalışma dosyaları"
+LangString str_desc_exe             ${LANG_TURKISH} \
+    "Vim program başlatıcı ve çalışma dosyaları. Bu bileşen zorunludur."
+
+LangString str_section_console      ${LANG_TURKISH} \
+    "Vim konsol sürümü"
+LangString str_desc_console         ${LANG_TURKISH} \
+    "Vim'in konsol sürümü (vim.exe)."
+
+LangString str_section_batch        ${LANG_TURKISH} \
+    ".bat dosyaları oluştur"
+LangString str_desc_batch           ${LANG_TURKISH} \
+    "Vim için komut satırında kullanmak üzere .bat dosyaları oluşturur"
+
+LangString str_group_icons          ${LANG_TURKISH} \
+    "Vim için kısayollar oluştur"
+LangString str_desc_icons           ${LANG_TURKISH} \
+    "Kolay erişim için Vim kısayolları oluşturur."
+
+LangString str_section_desktop      ${LANG_TURKISH} \
+    "Masaüstünde"
+LangString str_desc_desktop         ${LANG_TURKISH} \
+    "gVim programı için Masaüstünde kısayol oluşturur."
+
+LangString str_section_start_menu   ${LANG_TURKISH} \
+    "Başlat Menüsü - Programlar klasöründe"
+LangString str_desc_start_menu      ${LANG_TURKISH} \
+    "Vim kısayolunu Başlat Menüsüne ekler."
+
+LangString str_section_edit_with    ${LANG_TURKISH} \
+    "Vim ile Aç"
+LangString str_desc_edit_with       ${LANG_TURKISH} \
+    "Vim'i $\"Birlikte aç$\" sağ tık menüsüne ekler."
+
+ LangString str_section_vim_rc       ${LANG_TURKISH} \
+    "Bir yapılandırma dosyası oluştur"
+LangString str_desc_vim_rc          ${LANG_TURKISH} \
+    "Eğer yoksa bir yapılandırma dosyası (_vimrc) oluşturur."
+
+LangString str_group_plugin         ${LANG_TURKISH} \
+    "Eklenti dizinleri oluştur"
+LangString str_desc_plugin          ${LANG_TURKISH} \
+    "Bu dizinlere Vim eklentilerini yerleştirerek Vim'e yeni \
+     özellikler kazandırabilirsiniz."
+
+LangString str_section_plugin_home  ${LANG_TURKISH} \
+    "Gizli"
+LangString str_desc_plugin_home     ${LANG_TURKISH} \
+    "Eklenti dizinlerini EV dizininde oluşturur."
+
+LangString str_section_plugin_vim   ${LANG_TURKISH} \
+    "Paylaşılan"
+LangString str_desc_plugin_vim      ${LANG_TURKISH} \
+    "Eklenti dizinlerini Vim yükleme dizininde oluşturur. Bu eklentilerden \
+     bilgisayarın tüm kullanıcıları yararlanabilir."
+
+LangString str_section_nls          ${LANG_TURKISH} \
+    "Ek dil desteği"
+LangString str_desc_nls             ${LANG_TURKISH} \
+    "Mevcut olan Vim yerelleştirmelerini yükler."
+
+LangString str_unsection_register   ${LANG_TURKISH} \
+    "Vim kaydını kaldır"
+LangString str_desc_unregister      ${LANG_TURKISH} \
+    "Vim'in bu bilgisayardaki kaydını kaldırır."
+
+LangString str_unsection_exe        ${LANG_TURKISH} \
+    "Vim programını ve çalıştırma dosyalarını kaldır"
+LangString str_desc_rm_exe          ${LANG_TURKISH} \
+    "Vim çalıştırılabilir dosyalarını ve diğer dosyaları kaldırır."
+
+LangString str_ungroup_plugin       ${LANG_TURKISH} \
+    "Eklenti dizinlerini kaldır"
+LangString str_desc_rm_plugin       ${LANG_TURKISH} \
+    "Eklenti dizinlerini eğer boş ise kaldırır."
+
+LangString str_unsection_plugin_home ${LANG_TURKISH} \
+    "Gizli"
+LangString str_desc_rm_plugin_home  ${LANG_TURKISH} \
+    "Eklenti dizinlerini EV dizininden kaldırır."
+
+LangString str_unsection_plugin_vim ${LANG_TURKISH} \
+    "Paylaşılan"
+LangString str_desc_rm_plugin_vim   ${LANG_TURKISH} \
+    "Eklenti dizinlerini Vim yükleme dizininden kaldırır."
+
+LangString str_unsection_rootdir    ${LANG_TURKISH} \
+    "Vim kök dizinini kaldır"
+LangString str_desc_rm_rootdir      ${LANG_TURKISH} \
+    "Vim kök dizinini kaldırır. Bu dizin Vim yapılandırma dosyalarını içerir!"
+
+ LangString str_msg_install_fail  ${LANG_TURKISH} \
+    "Yükleme başarısız oldu. Yeniden deneyin."
+
+LangString str_msg_rm_exe_fail   ${LANG_TURKISH} \
+    "$0 içindeki bazı dosyalar silinemedi!$\r$\n\
+     Bu dosyaları el ile kaldırmalısınız."
+
+ LangString str_msg_uninstalling  ${LANG_TURKISH} \
+    "Eski sürüm kaldırılıyor..."
+
+LangString str_msg_registering   ${LANG_TURKISH} \
+    "Kaydediliyor..."
+
+LangString str_msg_unregistering ${LANG_TURKISH} \
+    "Kayıt siliniyor..."
+
+
+##############################################################################
+# Dialog Box                                                              {{{1
+##############################################################################
+
+LangString str_vimrc_page_title    ${LANG_TURKISH} \
+    "_vimrc ayarlarını seçin"
+LangString str_vimrc_page_subtitle ${LANG_TURKISH} \
+    "Yüklenecek ek özellikler, klavye ve fare için ayarları seçin."
+
+LangString str_msg_compat_title    ${LANG_TURKISH} \
+    " Vi / Vim davranışı "
+LangString str_msg_compat_desc     ${LANG_TURKISH} \
+    "&Uyumluluk ve ek özellikler"
+LangString str_msg_compat_vi       ${LANG_TURKISH} \
+    "Vi uyumlu"
+LangString str_msg_compat_vim      ${LANG_TURKISH} \
+    "Vim orijinal"
+LangString str_msg_compat_defaults ${LANG_TURKISH} \
+    "Vim ve ek olarak bazı ek özellikler (load defaults.vim)"
+LangString str_msg_compat_all      ${LANG_TURKISH} \
+    "Vim ve ek olarak tüm ek özellikler (load vimrc_example.vim) (Default)"
+
+LangString str_msg_keymap_title   ${LANG_TURKISH} \
+    " Klavye İşlevleri "
+LangString str_msg_keymap_desc    ${LANG_TURKISH} \
+    "&Windows için bazı düğmeleri yeniden ayarla (Ctrl-V, Ctrl-C, Ctrl-A, Ctrl-S, Ctrl-F, etc)"
+LangString str_msg_keymap_default ${LANG_TURKISH} \
+    "Düğme işlevlerini değiştirme (varsayılan)"
+LangString str_msg_keymap_windows ${LANG_TURKISH} \
+    "Bazı düğmeleri yeniden ayarla"
+
+LangString str_msg_mouse_title   ${LANG_TURKISH} \
+    " Fare İşlevleri "
+LangString str_msg_mouse_desc    ${LANG_TURKISH} \
+    "&Sağ ve sol düğme davranışı"
+LangString str_msg_mouse_default ${LANG_TURKISH} \
+    "Sağ: açılır menü, Sol: Görsel Kip (varsayılan)"
+LangString str_msg_mouse_windows ${LANG_TURKISH} \
+    "Sağ: açılır menü, Sol: seçim kipi (Windows)"
+LangString str_msg_mouse_unix    ${LANG_TURKISH} \
+    "Sağ: seçimi genişlet, Sol: Görsel Kip (Unix)"

pixmaps/alert.xpm

@@ -0,0 +1,44 @@
+/* XPM */
+static char * alert_xpm[] = {
+/* width height ncolors cpp [x_hot y_hot] */
+"34 34 4 1 0 0",
+/* colors */
+" 	s none	m none	c none",
+".	s iconColor1	m black	c #000000",
+"X	s iconColor6	m white	c #FFFF00",
+"o	s bottomShadowColor	m black	c #5D6069",
+/* pixels */
+"                                  ",
+"              ...                 ",
+"             .XXX.                ",
+"            .XXXXX.o              ",
+"            .XXXXX.oo             ",
+"           .XXXXXXX.oo            ",
+"           .XXXXXXX.oo            ",
+"          .XXXXXXXXX.oo           ",
+"          .XXXXXXXXX.oo           ",
+"         .XXXXXXXXXXX.oo          ",
+"         .XXXX...XXXX.oo          ",
+"        .XXXX.....XXXX.oo         ",
+"        .XXXX.....XXXX.oo         ",
+"       .XXXXX.....XXXXX.oo        ",
+"       .XXXXX.....XXXXX.oo        ",
+"      .XXXXXX.....XXXXXX.oo       ",
+"      .XXXXXX.....XXXXXX.oo       ",
+"     .XXXXXXXX...XXXXXXXX.oo      ",
+"     .XXXXXXXX...XXXXXXXX.oo      ",
+"    .XXXXXXXXX...XXXXXXXXX.oo     ",
+"    .XXXXXXXXXX.XXXXXXXXXX.oo     ",
+"   .XXXXXXXXXXX.XXXXXXXXXXX.oo    ",
+"   .XXXXXXXXXXXXXXXXXXXXXXX.oo    ",
+"  .XXXXXXXXXXXX..XXXXXXXXXXX.oo   ",
+"  .XXXXXXXXXXX....XXXXXXXXXX.oo   ",
+" .XXXXXXXXXXXX....XXXXXXXXXXX.oo  ",
+" .XXXXXXXXXXXXX..XXXXXXXXXXXX.oo  ",
+" .XXXXXXXXXXXXXXXXXXXXXXXXXXX.ooo ",
+" .XXXXXXXXXXXXXXXXXXXXXXXXXXX.ooo ",
+"  .XXXXXXXXXXXXXXXXXXXXXXXXX.oooo ",
+"   .........................ooooo ",
+"     ooooooooooooooooooooooooooo  ",
+"      ooooooooooooooooooooooooo   ",
+"                                  "};

pixmaps/error.xpm

@@ -0,0 +1,44 @@
+/* XPM */
+static char * error_xpm[] = {
+/* width height ncolors cpp [x_hot y_hot] */
+"34 34 4 1 0 0",
+/* colors */
+" 	s none	m none	c none",
+".	s iconColor3	m black	c #FF0000",
+"X	s bottomShadowColor	m black	c #5D6069",
+"o	s iconColor2	m white	c #FFFFFF",
+/* pixels */
+"                                  ",
+"            ........              ",
+"          ............            ",
+"        ................          ",
+"       ..................         ",
+"      ....................X       ",
+"     ......................X      ",
+"    ........................X     ",
+"   .......o..........o.......X    ",
+"   ......ooo........ooo......X    ",
+"  ......ooooo......ooooo......X   ",
+"  .......ooooo....ooooo.......X   ",
+" .........ooooo..ooooo.........X  ",
+" ..........oooooooooo..........X  ",
+" ...........oooooooo...........XX ",
+" ............oooooo............XX ",
+" ............oooooo............XX ",
+" ...........oooooooo...........XX ",
+" ..........oooooooooo..........XX ",
+" .........ooooo..ooooo.........XX ",
+"  .......ooooo....ooooo.......XX  ",
+"  ......ooooo......ooooo......XX  ",
+"   ......ooo........ooo......XXX  ",
+"   .......o..........o.......XX   ",
+"    ........................XXX   ",
+"     ......................XXX    ",
+"     X....................XXX     ",
+"      X..................XXX      ",
+"       X................XXX       ",
+"        XX............XXXX        ",
+"          XX........XXXXX         ",
+"            XXXXXXXXXXX           ",
+"              XXXXXXX             ",
+"                                  "};

pixmaps/gen-inline-pixbufs.sh

@@ -0,0 +1,11 @@
+#! /bin/sh
+
+prefix=stock_
+list=
+
+for file in "$@"; do
+    name=$(echo "$file" | sed 's|-|_|g; s|^.*/||; s|\..*$||')
+    list="$list $prefix$name $file"
+done
+
+gdk-pixbuf-csource --raw --static --build-list $list

pixmaps/generic.xpm

@@ -0,0 +1,44 @@
+/* XPM */
+static char * generic_xpm[] = {
+/* width height ncolors cpp [x_hot y_hot] */
+"34 34 4 1 0 0",
+/* colors */
+" 	s none	m none	c none",
+".	s bottomShadowColor	m black	c #5D6069",
+"X	s iconColor2	m white	c #FFFFFF",
+"o	s iconColor1	m black	c #000000",
+/* pixels */
+"                                  ",
+"            ........              ",
+"         ...XXXXXXXX...           ",
+"       ..XXXXXXXXXXXXXX..         ",
+"      .XXXXXXXXXXXXXXXXXX.        ",
+"     .XXXXXXXXXXXXXXXXXXXXo       ",
+"    .XXXXXXXXXXXXXXXXXXXXXXo      ",
+"   .XXXXXXXXXXXXXXXXXXXXXXXXo     ",
+"  .XXXXXXXXXXXXXXXXXXXXXXXXXXo    ",
+"  .XXXXXXXXXXXXXXXXXXXXXXXXXXo.   ",
+" .XXXXXXXXXXXXXXXXXXXXXXXXXXXXo.  ",
+" .XXXXXXXXXXXXXXXXXXXXXXXXXXXXo.  ",
+" .XXXXXXXXXXXXXXXXXXXXXXXXXXXXo.. ",
+" .XXXXXXXXXXXXXXXXXXXXXXXXXXXXo.. ",
+" .XXXXXXXXXXXXXXXXXXXXXXXXXXXXo.. ",
+" .XXXXXXXXXXXXXXXXXXXXXXXXXXXXo.. ",
+" .XXXXXXXXXXXXXXXXXXXXXXXXXXXXo.. ",
+"  .XXXXXXXXXXXXXXXXXXXXXXXXXXo... ",
+"  .XXXXXXXXXXXXXXXXXXXXXXXXXXo... ",
+"   .XXXXXXXXXXXXXXXXXXXXXXXXo...  ",
+"    oXXXXXXXXXXXXXXXXXXXXXXo....  ",
+"     oXXXXXXXXXXXXXXXXXXXXo....   ",
+"      oXXXXXXXXXXXXXXXXXXo....    ",
+"       ooXXXXXXXXXXXXXXoo....     ",
+"        .oooXXXXXXXXooo.....      ",
+"         ...oooXXXXo.......       ",
+"           ....oXXXo.....         ",
+"              .oXXXo..            ",
+"                oXXo..            ",
+"                 oXo..            ",
+"                  oo..            ",
+"                   ...            ",
+"                    ..            ",
+"                                  "};