Adding upstream version 2.4.38.upstream/2.4.38

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2456 insertions, 0 deletions

diff --git a/server/protocol.c b/server/protocol.c
new file mode 100644
index 0000000..8d90055
--- /dev/null
+++ b/server/protocol.c
@@ -0,0 +1,2456 @@
+/* Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The ASF licenses this file to You under the Apache License, Version 2.0
+ * (the "License"); you may not use this file except in compliance with
+ * the License.  You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * protocol.c --- routines which directly communicate with the client.
+ *
+ * Code originally by Rob McCool; much redone by Robert S. Thau
+ * and the Apache Software Foundation.
+ */
+
+#include "apr.h"
+#include "apr_strings.h"
+#include "apr_buckets.h"
+#include "apr_lib.h"
+#include "apr_signal.h"
+#include "apr_strmatch.h"
+
+#define APR_WANT_STDIO          /* for sscanf */
+#define APR_WANT_STRFUNC
+#define APR_WANT_MEMFUNC
+#include "apr_want.h"
+
+#include "util_filter.h"
+#include "ap_config.h"
+#include "httpd.h"
+#include "http_config.h"
+#include "http_core.h"
+#include "http_protocol.h"
+#include "http_main.h"
+#include "http_request.h"
+#include "http_vhost.h"
+#include "http_log.h"           /* For errors detected in basic auth common
+                                 * support code... */
+#include "mod_core.h"
+#include "util_charset.h"
+#include "util_ebcdic.h"
+#include "scoreboard.h"
+
+#if APR_HAVE_STDARG_H
+#include <stdarg.h>
+#endif
+#if APR_HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+/* we know core's module_index is 0 */
+#undef APLOG_MODULE_INDEX
+#define APLOG_MODULE_INDEX AP_CORE_MODULE_INDEX
+
+APR_HOOK_STRUCT(
+    APR_HOOK_LINK(pre_read_request)
+    APR_HOOK_LINK(post_read_request)
+    APR_HOOK_LINK(log_transaction)
+    APR_HOOK_LINK(http_scheme)
+    APR_HOOK_LINK(default_port)
+    APR_HOOK_LINK(note_auth_failure)
+    APR_HOOK_LINK(protocol_propose)
+    APR_HOOK_LINK(protocol_switch)
+    APR_HOOK_LINK(protocol_get)
+)
+
+AP_DECLARE_DATA ap_filter_rec_t *ap_old_write_func = NULL;
+
+
+/* Patterns to match in ap_make_content_type() */
+static const char *needcset[] = {
+    "text/plain",
+    "text/html",
+    NULL
+};
+static const apr_strmatch_pattern **needcset_patterns;
+static const apr_strmatch_pattern *charset_pattern;
+
+AP_DECLARE(void) ap_setup_make_content_type(apr_pool_t *pool)
+{
+    int i;
+    for (i = 0; needcset[i]; i++) {
+        continue;
+    }
+    needcset_patterns = (const apr_strmatch_pattern **)
+        apr_palloc(pool, (i + 1) * sizeof(apr_strmatch_pattern *));
+    for (i = 0; needcset[i]; i++) {
+        needcset_patterns[i] = apr_strmatch_precompile(pool, needcset[i], 0);
+    }
+    needcset_patterns[i] = NULL;
+    charset_pattern = apr_strmatch_precompile(pool, "charset=", 0);
+}
+
+/*
+ * Builds the content-type that should be sent to the client from the
+ * content-type specified.  The following rules are followed:
+ *    - if type is NULL or "", return NULL (do not set content-type).
+ *    - if charset adding is disabled, stop processing and return type.
+ *    - then, if there are no parameters on type, add the default charset
+ *    - return type
+ */
+AP_DECLARE(const char *)ap_make_content_type(request_rec *r, const char *type)
+{
+    const apr_strmatch_pattern **pcset;
+    core_dir_config *conf =
+        (core_dir_config *)ap_get_core_module_config(r->per_dir_config);
+    core_request_config *request_conf;
+    apr_size_t type_len;
+
+    if (!type || *type == '\0') {
+        return NULL;
+    }
+
+    if (conf->add_default_charset != ADD_DEFAULT_CHARSET_ON) {
+        return type;
+    }
+
+    request_conf = ap_get_core_module_config(r->request_config);
+    if (request_conf->suppress_charset) {
+        return type;
+    }
+
+    type_len = strlen(type);
+
+    if (apr_strmatch(charset_pattern, type, type_len) != NULL) {
+        /* already has parameter, do nothing */
+        /* XXX we don't check the validity */
+        ;
+    }
+    else {
+        /* see if it makes sense to add the charset. At present,
+         * we only add it if the Content-type is one of needcset[]
+         */
+        for (pcset = needcset_patterns; *pcset ; pcset++) {
+            if (apr_strmatch(*pcset, type, type_len) != NULL) {
+                struct iovec concat[3];
+                concat[0].iov_base = (void *)type;
+                concat[0].iov_len = type_len;
+                concat[1].iov_base = (void *)"; charset=";
+                concat[1].iov_len = sizeof("; charset=") - 1;
+                concat[2].iov_base = (void *)(conf->add_default_charset_name);
+                concat[2].iov_len = strlen(conf->add_default_charset_name);
+                type = apr_pstrcatv(r->pool, concat, 3, NULL);
+                break;
+            }
+        }
+    }
+
+    return type;
+}
+
+AP_DECLARE(void) ap_set_content_length(request_rec *r, apr_off_t clength)
+{
+    r->clength = clength;
+    apr_table_setn(r->headers_out, "Content-Length",
+                   apr_off_t_toa(r->pool, clength));
+}
+
+/*
+ * Return the latest rational time from a request/mtime (modification time)
+ * pair.  We return the mtime unless it's in the future, in which case we
+ * return the current time.  We use the request time as a reference in order
+ * to limit the number of calls to time().  We don't check for futurosity
+ * unless the mtime is at least as new as the reference.
+ */
+AP_DECLARE(apr_time_t) ap_rationalize_mtime(request_rec *r, apr_time_t mtime)
+{
+    apr_time_t now;
+
+    /* For all static responses, it's almost certain that the file was
+     * last modified before the beginning of the request.  So there's
+     * no reason to call time(NULL) again.  But if the response has been
+     * created on demand, then it might be newer than the time the request
+     * started.  In this event we really have to call time(NULL) again
+     * so that we can give the clients the most accurate Last-Modified.  If we
+     * were given a time in the future, we return the current time - the
+     * Last-Modified can't be in the future.
+     */
+    now = (mtime < r->request_time) ? r->request_time : apr_time_now();
+    return (mtime > now) ? now : mtime;
+}
+
+/* Get a line of protocol input, including any continuation lines
+ * caused by MIME folding (or broken clients) if fold != 0, and place it
+ * in the buffer s, of size n bytes, without the ending newline.
+ * 
+ * Pulls from r->proto_input_filters instead of r->input_filters for
+ * stricter protocol adherence and better input filter behavior during
+ * chunked trailer processing (for http).
+ *
+ * If s is NULL, ap_rgetline_core will allocate necessary memory from r->pool.
+ *
+ * Returns APR_SUCCESS if there are no problems and sets *read to be
+ * the full length of s.
+ *
+ * APR_ENOSPC is returned if there is not enough buffer space.
+ * Other errors may be returned on other errors.
+ *
+ * The [CR]LF are *not* returned in the buffer.  Therefore, a *read of 0
+ * indicates that an empty line was read.
+ *
+ * Notes: Because the buffer uses 1 char for NUL, the most we can return is
+ *        (n - 1) actual characters.
+ *
+ *        If no LF is detected on the last line due to a dropped connection
+ *        or a full buffer, that's considered an error.
+ */
+AP_DECLARE(apr_status_t) ap_rgetline_core(char **s, apr_size_t n,
+                                          apr_size_t *read, request_rec *r,
+                                          int flags, apr_bucket_brigade *bb)
+{
+    apr_status_t rv;
+    apr_bucket *e;
+    apr_size_t bytes_handled = 0, current_alloc = 0;
+    char *pos, *last_char = *s;
+    int do_alloc = (*s == NULL), saw_eos = 0;
+    int fold = flags & AP_GETLINE_FOLD;
+    int crlf = flags & AP_GETLINE_CRLF;
+    int nospc_eol = flags & AP_GETLINE_NOSPC_EOL;
+    int saw_eol = 0, saw_nospc = 0;
+
+    if (!n) {
+        /* Needs room for NUL byte at least */
+        *read = 0;
+        return APR_BADARG;
+    }
+
+    /*
+     * Initialize last_char as otherwise a random value will be compared
+     * against APR_ASCII_LF at the end of the loop if bb only contains
+     * zero-length buckets.
+     */
+    if (last_char)
+        *last_char = '\0';
+
+    do {
+        apr_brigade_cleanup(bb);
+        rv = ap_get_brigade(r->proto_input_filters, bb, AP_MODE_GETLINE,
+                            APR_BLOCK_READ, 0);
+        if (rv != APR_SUCCESS) {
+            goto cleanup;
+        }
+
+        /* Something horribly wrong happened.  Someone didn't block! 
+         * (this also happens at the end of each keepalive connection)
+         */
+        if (APR_BRIGADE_EMPTY(bb)) {
+            rv = APR_EGENERAL;
+            goto cleanup;
+        }
+
+        for (e = APR_BRIGADE_FIRST(bb);
+             e != APR_BRIGADE_SENTINEL(bb);
+             e = APR_BUCKET_NEXT(e))
+        {
+            const char *str;
+            apr_size_t len;
+
+            /* If we see an EOS, don't bother doing anything more. */
+            if (APR_BUCKET_IS_EOS(e)) {
+                saw_eos = 1;
+                break;
+            }
+
+            rv = apr_bucket_read(e, &str, &len, APR_BLOCK_READ);
+            if (rv != APR_SUCCESS) {
+                goto cleanup;
+            }
+
+            if (len == 0) {
+                /* no use attempting a zero-byte alloc (hurts when
+                 * using --with-efence --enable-pool-debug) or
+                 * doing any of the other logic either
+                 */
+                continue;
+            }
+
+            /* Would this overrun our buffer?  If so, we'll die. */
+            if (n < bytes_handled + len) {
+                /* Before we die, let's fill the buffer up to its limit (i.e.
+                 * fall through with the remaining length, if any), setting
+                 * saw_eol on LF to stop the outer loop appropriately; we may
+                 * come back here once the buffer is filled (no LF seen), and
+                 * either be done at that time or continue to wait for LF here
+                 * if nospc_eol is set.
+                 *
+                 * But there is also a corner cases which we want to address,
+                 * namely if the buffer is overrun by the final LF only (i.e.
+                 * the CR fits in); this is not really an overrun since we'll
+                 * strip the CR finally (and use it for NUL byte), but anyway
+                 * we have to handle the case so that it's not returned to the
+                 * caller as part of the truncated line (it's not!). This is
+                 * easier to consider that LF is out of counting and thus fall
+                 * through with no error (saw_eol is set to 2 so that we later
+                 * ignore LF handling already done here), while folding and
+                 * nospc_eol logics continue to work (or fail) appropriately.
+                 */
+                saw_eol = (str[len - 1] == APR_ASCII_LF);
+                if (/* First time around */
+                    saw_eol && !saw_nospc
+                    /*  Single LF completing the buffered CR, */
+                    && ((len == 1 && ((*s)[bytes_handled - 1] == APR_ASCII_CR))
+                    /*  or trailing CRLF overuns by LF only */
+                        || (len > 1 && str[len - 2] == APR_ASCII_CR
+                            && n - bytes_handled + 1 == len))) {
+                    /* In both cases *last_char is (to be) the CR stripped by
+                     * later 'bytes_handled = last_char - *s'.
+                     */
+                    saw_eol = 2;
+                }
+                else {
+                    /* In any other case we'd lose data. */
+                    rv = APR_ENOSPC;
+                    saw_nospc = 1;
+                }
+                len = n - bytes_handled;
+                if (!len) {
+                    if (saw_eol) {
+                        break;
+                    }
+                    if (nospc_eol) {
+                        continue;
+                    }
+                    goto cleanup;
+                }
+            }
+
+            /* Do we have to handle the allocation ourselves? */
+            if (do_alloc) {
+                /* We'll assume the common case where one bucket is enough. */
+                if (!*s) {
+                    current_alloc = len;
+                    *s = apr_palloc(r->pool, current_alloc + 1);
+                }
+                else if (bytes_handled + len > current_alloc) {
+                    /* Increase the buffer size */
+                    apr_size_t new_size = current_alloc * 2;
+                    char *new_buffer;
+
+                    if (bytes_handled + len > new_size) {
+                        new_size = (bytes_handled + len) * 2;
+                    }
+
+                    new_buffer = apr_palloc(r->pool, new_size + 1);
+
+                    /* Copy what we already had. */
+                    memcpy(new_buffer, *s, bytes_handled);
+                    current_alloc = new_size;
+                    *s = new_buffer;
+                }
+            }
+
+            /* Just copy the rest of the data to the end of the old buffer. */
+            pos = *s + bytes_handled;
+            memcpy(pos, str, len);
+            last_char = pos + len - 1;
+
+            /* We've now processed that new data - update accordingly. */
+            bytes_handled += len;
+        }
+
+        /* If we got a full line of input, stop reading */
+        if (last_char && (*last_char == APR_ASCII_LF)) {
+            saw_eol = 1;
+        }
+    } while (!saw_eol);
+
+    if (rv != APR_SUCCESS) {
+        /* End of line after APR_ENOSPC above */
+        goto cleanup;
+    }
+
+    /* Now terminate the string at the end of the line;
+     * if the last-but-one character is a CR, terminate there.
+     * LF is handled above (not accounted) when saw_eol == 2,
+     * the last char is CR to terminate at still.
+     */
+    if (saw_eol < 2) {
+        if (last_char > *s && last_char[-1] == APR_ASCII_CR) {
+            last_char--;
+        }
+        else if (crlf) {
+            rv = APR_EINVAL;
+            goto cleanup;
+        }
+    }
+    bytes_handled = last_char - *s;
+
+    /* If we're folding, we have more work to do.
+     *
+     * Note that if an EOS was seen, we know we can't have another line.
+     */
+    if (fold && bytes_handled && !saw_eos) {
+        for (;;) {
+            const char *str;
+            apr_size_t len;
+            char c;
+
+            /* Clear the temp brigade for this filter read. */
+            apr_brigade_cleanup(bb);
+
+            /* We only care about the first byte. */
+            rv = ap_get_brigade(r->proto_input_filters, bb, AP_MODE_SPECULATIVE,
+                                APR_BLOCK_READ, 1);
+            if (rv != APR_SUCCESS) {
+                goto cleanup;
+            }
+
+            if (APR_BRIGADE_EMPTY(bb)) {
+                break;
+            }
+
+            e = APR_BRIGADE_FIRST(bb);
+
+            /* If we see an EOS, don't bother doing anything more. */
+            if (APR_BUCKET_IS_EOS(e)) {
+                break;
+            }
+
+            rv = apr_bucket_read(e, &str, &len, APR_BLOCK_READ);
+            if (rv != APR_SUCCESS) {
+                apr_brigade_cleanup(bb);
+                goto cleanup;
+            }
+
+            /* Found one, so call ourselves again to get the next line.
+             *
+             * FIXME: If the folding line is completely blank, should we
+             * stop folding?  Does that require also looking at the next
+             * char?
+             */
+            /* When we call destroy, the buckets are deleted, so save that
+             * one character we need.  This simplifies our execution paths
+             * at the cost of one character read.
+             */
+            c = *str;
+            if (c == APR_ASCII_BLANK || c == APR_ASCII_TAB) {
+                /* Do we have enough space? We may be full now. */
+                if (bytes_handled >= n) {
+                    rv = APR_ENOSPC;
+                    goto cleanup;
+                }
+                else {
+                    apr_size_t next_size, next_len;
+                    char *tmp;
+
+                    /* If we're doing the allocations for them, we have to
+                     * give ourselves a NULL and copy it on return.
+                     */
+                    if (do_alloc) {
+                        tmp = NULL;
+                    }
+                    else {
+                        tmp = last_char;
+                    }
+
+                    next_size = n - bytes_handled;
+
+                    rv = ap_rgetline_core(&tmp, next_size, &next_len, r,
+                                          flags & ~AP_GETLINE_FOLD, bb);
+                    if (rv != APR_SUCCESS) {
+                        goto cleanup;
+                    }
+
+                    if (do_alloc && next_len > 0) {
+                        char *new_buffer;
+                        apr_size_t new_size = bytes_handled + next_len + 1;
+
+                        /* we need to alloc an extra byte for a null */
+                        new_buffer = apr_palloc(r->pool, new_size);
+
+                        /* Copy what we already had. */
+                        memcpy(new_buffer, *s, bytes_handled);
+
+                        /* copy the new line, including the trailing null */
+                        memcpy(new_buffer + bytes_handled, tmp, next_len);
+                        *s = new_buffer;
+                    }
+
+                    last_char += next_len;
+                    bytes_handled += next_len;
+                }
+            }
+            else { /* next character is not tab or space */
+                break;
+            }
+        }
+    }
+
+cleanup:
+    if (bytes_handled >= n) {
+        bytes_handled = n - 1;
+    }
+
+    *read = bytes_handled;
+    if (*s) {
+        /* ensure the string is NUL terminated */
+        (*s)[*read] = '\0';
+
+        /* PR#43039: We shouldn't accept NULL bytes within the line */
+        bytes_handled = strlen(*s);
+        if (bytes_handled < *read) {
+            *read = bytes_handled;
+            if (rv == APR_SUCCESS) {
+                rv = APR_EINVAL;
+            }
+        }
+    }
+    return rv;
+}
+
+#if APR_CHARSET_EBCDIC
+AP_DECLARE(apr_status_t) ap_rgetline(char **s, apr_size_t n,
+                                     apr_size_t *read, request_rec *r,
+                                     int fold, apr_bucket_brigade *bb)
+{
+    /* on ASCII boxes, ap_rgetline is a macro which simply invokes
+     * ap_rgetline_core with the same parms
+     *
+     * on EBCDIC boxes, each complete http protocol input line needs to be
+     * translated into the code page used by the compiler.  Since
+     * ap_rgetline_core uses recursion, we do the translation in a wrapper
+     * function to ensure that each input character gets translated only once.
+     */
+    apr_status_t rv;
+
+    rv = ap_rgetline_core(s, n, read, r, fold, bb);
+    if (rv == APR_SUCCESS || APR_STATUS_IS_ENOSPC(rv)) {
+        ap_xlate_proto_from_ascii(*s, *read);
+    }
+    return rv;
+}
+#endif
+
+AP_DECLARE(int) ap_getline(char *s, int n, request_rec *r, int flags)
+{
+    char *tmp_s = s;
+    apr_status_t rv;
+    apr_size_t len;
+    apr_bucket_brigade *tmp_bb;
+
+    if (n < 1) {
+        /* Can't work since we always NUL terminate */
+        return -1;
+    }
+
+    tmp_bb = apr_brigade_create(r->pool, r->connection->bucket_alloc);
+    rv = ap_rgetline(&tmp_s, n, &len, r, flags, tmp_bb);
+    apr_brigade_destroy(tmp_bb);
+
+    /* Map the out-of-space condition to the old API. */
+    if (rv == APR_ENOSPC) {
+        return n;
+    }
+
+    /* Anything else is just bad. */
+    if (rv != APR_SUCCESS) {
+        return -1;
+    }
+
+    return (int)len;
+}
+
+/* parse_uri: break apart the uri
+ * Side Effects:
+ * - sets r->args to rest after '?' (or NULL if no '?')
+ * - sets r->uri to request uri (without r->args part)
+ * - sets r->hostname (if not set already) from request (scheme://host:port)
+ */
+AP_CORE_DECLARE(void) ap_parse_uri(request_rec *r, const char *uri)
+{
+    int status = HTTP_OK;
+
+    r->unparsed_uri = apr_pstrdup(r->pool, uri);
+
+    /* http://issues.apache.org/bugzilla/show_bug.cgi?id=31875
+     * http://issues.apache.org/bugzilla/show_bug.cgi?id=28450
+     *
+     * This is not in fact a URI, it's a path.  That matters in the
+     * case of a leading double-slash.  We need to resolve the issue
+     * by normalizing that out before treating it as a URI.
+     */
+    while ((uri[0] == '/') && (uri[1] == '/')) {
+        ++uri ;
+    }
+    if (r->method_number == M_CONNECT) {
+        status = apr_uri_parse_hostinfo(r->pool, uri, &r->parsed_uri);
+    }
+    else {
+        status = apr_uri_parse(r->pool, uri, &r->parsed_uri);
+    }
+
+    if (status == APR_SUCCESS) {
+        /* if it has a scheme we may need to do absoluteURI vhost stuff */
+        if (r->parsed_uri.scheme
+            && !strcasecmp(r->parsed_uri.scheme, ap_http_scheme(r))) {
+            r->hostname = r->parsed_uri.hostname;
+        }
+        else if (r->method_number == M_CONNECT) {
+            r->hostname = r->parsed_uri.hostname;
+        }
+
+        r->args = r->parsed_uri.query;
+        r->uri = r->parsed_uri.path ? r->parsed_uri.path
+                 : apr_pstrdup(r->pool, "/");
+
+#if defined(OS2) || defined(WIN32)
+        /* Handle path translations for OS/2 and plug security hole.
+         * This will prevent "http://www.wherever.com/..\..\/" from
+         * returning a directory for the root drive.
+         */
+        {
+            char *x;
+
+            for (x = r->uri; (x = strchr(x, '\\')) != NULL; )
+                *x = '/';
+        }
+#endif /* OS2 || WIN32 */
+    }
+    else {
+        r->args = NULL;
+        r->hostname = NULL;
+        r->status = HTTP_BAD_REQUEST;             /* set error status */
+        r->uri = apr_pstrdup(r->pool, uri);
+    }
+}
+
+/* get the length of the field name for logging, but no more than 80 bytes */
+#define LOG_NAME_MAX_LEN 80
+static int field_name_len(const char *field)
+{
+    const char *end = ap_strchr_c(field, ':');
+    if (end == NULL || end - field > LOG_NAME_MAX_LEN)
+        return LOG_NAME_MAX_LEN;
+    return end - field;
+}
+
+static int read_request_line(request_rec *r, apr_bucket_brigade *bb)
+{
+    enum {
+        rrl_none, rrl_badmethod, rrl_badwhitespace, rrl_excesswhitespace,
+        rrl_missinguri, rrl_baduri, rrl_badprotocol, rrl_trailingtext,
+        rrl_badmethod09, rrl_reject09
+    } deferred_error = rrl_none;
+    char *ll;
+    char *uri;
+    apr_size_t len;
+    int num_blank_lines = DEFAULT_LIMIT_BLANK_LINES;
+    core_server_config *conf = ap_get_core_module_config(r->server->module_config);
+    int strict = (conf->http_conformance != AP_HTTP_CONFORMANCE_UNSAFE);
+
+    /* Read past empty lines until we get a real request line,
+     * a read error, the connection closes (EOF), or we timeout.
+     *
+     * We skip empty lines because browsers have to tack a CRLF on to the end
+     * of POSTs to support old CERN webservers.  But note that we may not
+     * have flushed any previous response completely to the client yet.
+     * We delay the flush as long as possible so that we can improve
+     * performance for clients that are pipelining requests.  If a request
+     * is pipelined then we won't block during the (implicit) read() below.
+     * If the requests aren't pipelined, then the client is still waiting
+     * for the final buffer flush from us, and we will block in the implicit
+     * read().  B_SAFEREAD ensures that the BUFF layer flushes if it will
+     * have to block during a read.
+     */
+
+    do {
+        apr_status_t rv;
+
+        /* ensure ap_rgetline allocates memory each time thru the loop
+         * if there are empty lines
+         */
+        r->the_request = NULL;
+        rv = ap_rgetline(&(r->the_request), (apr_size_t)(r->server->limit_req_line + 2),
+                         &len, r, strict ? AP_GETLINE_CRLF : 0, bb);
+
+        if (rv != APR_SUCCESS) {
+            r->request_time = apr_time_now();
+
+            /* ap_rgetline returns APR_ENOSPC if it fills up the
+             * buffer before finding the end-of-line.  This is only going to
+             * happen if it exceeds the configured limit for a request-line.
+             */
+            if (APR_STATUS_IS_ENOSPC(rv)) {
+                r->status = HTTP_REQUEST_URI_TOO_LARGE;
+            }
+            else if (APR_STATUS_IS_TIMEUP(rv)) {
+                r->status = HTTP_REQUEST_TIME_OUT;
+            }
+            else if (APR_STATUS_IS_EINVAL(rv)) {
+                r->status = HTTP_BAD_REQUEST;
+            }
+            r->proto_num = HTTP_VERSION(1,0);
+            r->protocol  = apr_pstrdup(r->pool, "HTTP/1.0");
+            return 0;
+        }
+    } while ((len <= 0) && (--num_blank_lines >= 0));
+
+    if (APLOGrtrace5(r)) {
+        ap_log_rerror(APLOG_MARK, APLOG_TRACE5, 0, r,
+                      "Request received from client: %s",
+                      ap_escape_logitem(r->pool, r->the_request));
+    }
+
+    r->request_time = apr_time_now();
+
+    r->method = r->the_request;
+
+    /* If there is whitespace before a method, skip it and mark in error */
+    if (apr_isspace(*r->method)) {
+        deferred_error = rrl_badwhitespace; 
+        for ( ; apr_isspace(*r->method); ++r->method)
+            ; 
+    }
+
+    /* Scan the method up to the next whitespace, ensure it contains only
+     * valid http-token characters, otherwise mark in error
+     */
+    if (strict) {
+        ll = (char*) ap_scan_http_token(r->method);
+    }
+    else {
+        ll = (char*) ap_scan_vchar_obstext(r->method);
+    }
+
+    if (((ll == r->method) || (*ll && !apr_isspace(*ll)))
+            && deferred_error == rrl_none) {
+        deferred_error = rrl_badmethod;
+        ll = strpbrk(ll, "\t\n\v\f\r ");
+    }
+
+    /* Verify method terminated with a single SP, or mark as specific error */
+    if (!ll) {
+        if (deferred_error == rrl_none)
+            deferred_error = rrl_missinguri;
+        r->protocol = uri = "";
+        len = 0;
+        goto rrl_done;
+    }
+    else if (strict && ll[0] && apr_isspace(ll[1])
+             && deferred_error == rrl_none) {
+        deferred_error = rrl_excesswhitespace; 
+    }
+
+    /* Advance uri pointer over leading whitespace, NUL terminate the method
+     * If non-SP whitespace is encountered, mark as specific error
+     */
+    for (uri = ll; apr_isspace(*uri); ++uri) 
+        if (*uri != ' ' && deferred_error == rrl_none)
+            deferred_error = rrl_badwhitespace; 
+    *ll = '\0';
+
+    if (!*uri && deferred_error == rrl_none)
+        deferred_error = rrl_missinguri;
+
+    /* Scan the URI up to the next whitespace, ensure it contains no raw
+     * control characters, otherwise mark in error
+     */
+    ll = (char*) ap_scan_vchar_obstext(uri);
+    if (ll == uri || (*ll && !apr_isspace(*ll))) {
+        deferred_error = rrl_baduri;
+        ll = strpbrk(ll, "\t\n\v\f\r ");
+    }
+
+    /* Verify URI terminated with a single SP, or mark as specific error */
+    if (!ll) {
+        r->protocol = "";
+        len = 0;
+        goto rrl_done;
+    }
+    else if (strict && ll[0] && apr_isspace(ll[1])
+             && deferred_error == rrl_none) {
+        deferred_error = rrl_excesswhitespace; 
+    }
+
+    /* Advance protocol pointer over leading whitespace, NUL terminate the uri
+     * If non-SP whitespace is encountered, mark as specific error
+     */
+    for (r->protocol = ll; apr_isspace(*r->protocol); ++r->protocol) 
+        if (*r->protocol != ' ' && deferred_error == rrl_none)
+            deferred_error = rrl_badwhitespace; 
+    *ll = '\0';
+
+    /* Scan the protocol up to the next whitespace, validation comes later */
+    if (!(ll = (char*) ap_scan_vchar_obstext(r->protocol))) {
+        len = strlen(r->protocol);
+        goto rrl_done;
+    }
+    len = ll - r->protocol;
+
+    /* Advance over trailing whitespace, if found mark in error,
+     * determine if trailing text is found, unconditionally mark in error,
+     * finally NUL terminate the protocol string
+     */
+    if (*ll && !apr_isspace(*ll)) {
+        deferred_error = rrl_badprotocol;
+    }
+    else if (strict && *ll) {
+        deferred_error = rrl_excesswhitespace;
+    }
+    else {
+        for ( ; apr_isspace(*ll); ++ll)
+            if (*ll != ' ' && deferred_error == rrl_none)
+                deferred_error = rrl_badwhitespace; 
+        if (*ll && deferred_error == rrl_none)
+            deferred_error = rrl_trailingtext;
+    }
+    *((char *)r->protocol + len) = '\0';
+
+rrl_done:
+    /* For internal integrity and palloc efficiency, reconstruct the_request
+     * in one palloc, using only single SP characters, per spec.
+     */
+    r->the_request = apr_pstrcat(r->pool, r->method, *uri ? " " : NULL, uri,
+                                 *r->protocol ? " " : NULL, r->protocol, NULL);
+
+    if (len == 8
+            && r->protocol[0] == 'H' && r->protocol[1] == 'T'
+            && r->protocol[2] == 'T' && r->protocol[3] == 'P'
+            && r->protocol[4] == '/' && apr_isdigit(r->protocol[5])
+            && r->protocol[6] == '.' && apr_isdigit(r->protocol[7])
+            && r->protocol[5] != '0') {
+        r->assbackwards = 0;
+        r->proto_num = HTTP_VERSION(r->protocol[5] - '0', r->protocol[7] - '0');
+    }
+    else if (len == 8
+                 && (r->protocol[0] == 'H' || r->protocol[0] == 'h')
+                 && (r->protocol[1] == 'T' || r->protocol[1] == 't')
+                 && (r->protocol[2] == 'T' || r->protocol[2] == 't')
+                 && (r->protocol[3] == 'P' || r->protocol[3] == 'p')
+                 && r->protocol[4] == '/' && apr_isdigit(r->protocol[5])
+                 && r->protocol[6] == '.' && apr_isdigit(r->protocol[7])
+                 && r->protocol[5] != '0') {
+        r->assbackwards = 0;
+        r->proto_num = HTTP_VERSION(r->protocol[5] - '0', r->protocol[7] - '0');
+        if (strict && deferred_error == rrl_none)
+            deferred_error = rrl_badprotocol;
+        else
+            memcpy((char*)r->protocol, "HTTP", 4);
+    }
+    else if (r->protocol[0]) {
+        r->proto_num = HTTP_VERSION(0, 9);
+        /* Defer setting the r->protocol string till error msg is composed */
+        if (deferred_error == rrl_none)
+            deferred_error = rrl_badprotocol;
+    }
+    else {
+        r->assbackwards = 1;
+        r->protocol  = apr_pstrdup(r->pool, "HTTP/0.9");
+        r->proto_num = HTTP_VERSION(0, 9);
+    }
+
+    /* Determine the method_number and parse the uri prior to invoking error
+     * handling, such that these fields are available for substitution
+     */
+    r->method_number = ap_method_number_of(r->method);
+    if (r->method_number == M_GET && r->method[0] == 'H')
+        r->header_only = 1;
+
+    ap_parse_uri(r, uri);
+
+    /* With the request understood, we can consider HTTP/0.9 specific errors */
+    if (r->proto_num == HTTP_VERSION(0, 9) && deferred_error == rrl_none) {
+        if (conf->http09_enable == AP_HTTP09_DISABLE)
+            deferred_error = rrl_reject09;
+        else if (strict && (r->method_number != M_GET || r->header_only))
+            deferred_error = rrl_badmethod09;
+    }
+
+    /* Now that the method, uri and protocol are all processed,
+     * we can safely resume any deferred error reporting
+     */
+    if (deferred_error != rrl_none) {
+        if (deferred_error == rrl_badmethod)
+            ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(03445)
+                          "HTTP Request Line; Invalid method token: '%.*s'",
+                          field_name_len(r->method), r->method);
+        else if (deferred_error == rrl_badmethod09)
+            ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(03444)
+                          "HTTP Request Line; Invalid method token: '%.*s'"
+                          " (only GET is allowed for HTTP/0.9 requests)",
+                          field_name_len(r->method), r->method);
+        else if (deferred_error == rrl_missinguri)
+            ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(03446)
+                          "HTTP Request Line; Missing URI");
+        else if (deferred_error == rrl_baduri)
+            ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(03454)
+                          "HTTP Request Line; URI incorrectly encoded: '%.*s'",
+                          field_name_len(r->unparsed_uri), r->unparsed_uri);
+        else if (deferred_error == rrl_badwhitespace)
+            ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(03447)
+                          "HTTP Request Line; Invalid whitespace");
+        else if (deferred_error == rrl_excesswhitespace)
+            ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(03448)
+                          "HTTP Request Line; Excess whitespace "
+                          "(disallowed by HttpProtocolOptions Strict");
+        else if (deferred_error == rrl_trailingtext)
+            ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(03449)
+                          "HTTP Request Line; Extraneous text found '%.*s' "
+                          "(perhaps whitespace was injected?)",
+                          field_name_len(ll), ll);
+        else if (deferred_error == rrl_reject09)
+            ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(02401)
+                          "HTTP Request Line; Rejected HTTP/0.9 request");
+        else if (deferred_error == rrl_badprotocol)
+            ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(02418)
+                          "HTTP Request Line; Unrecognized protocol '%.*s' "
+                          "(perhaps whitespace was injected?)",
+                          field_name_len(r->protocol), r->protocol);
+        r->status = HTTP_BAD_REQUEST;
+        goto rrl_failed;
+    }
+
+    if (conf->http_methods == AP_HTTP_METHODS_REGISTERED
+            && r->method_number == M_INVALID) {
+        ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(02423)
+                      "HTTP Request Line; Unrecognized HTTP method: '%.*s' "
+                      "(disallowed by RegisteredMethods)",
+                      field_name_len(r->method), r->method);
+        r->status = HTTP_NOT_IMPLEMENTED;
+        /* This can't happen in an HTTP/0.9 request, we verified GET above */
+        return 0;
+    }
+
+    if (r->status != HTTP_OK) {
+        ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(03450)
+                      "HTTP Request Line; Unable to parse URI: '%.*s'",
+                      field_name_len(r->uri), r->uri);
+        goto rrl_failed;
+    }
+
+    if (strict) {
+        if (r->parsed_uri.fragment) {
+            /* RFC3986 3.5: no fragment */
+            ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(02421)
+                          "HTTP Request Line; URI must not contain a fragment");
+            r->status = HTTP_BAD_REQUEST;
+            goto rrl_failed;
+        }
+        if (r->parsed_uri.user || r->parsed_uri.password) {
+            ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(02422)
+                          "HTTP Request Line; URI must not contain a "
+                          "username/password");
+            r->status = HTTP_BAD_REQUEST;
+            goto rrl_failed;
+        }
+    }
+
+    return 1;
+
+rrl_failed:
+    if (r->proto_num == HTTP_VERSION(0, 9)) {
+        /* Send all parsing and protocol error response with 1.x behavior,
+         * and reserve 505 errors for actual HTTP protocols presented.
+         * As called out in RFC7230 3.5, any errors parsing the protocol
+         * from the request line are nearly always misencoded HTTP/1.x
+         * requests. Only a valid 0.9 request with no parsing errors
+         * at all may be treated as a simple request, if allowed.
+         */
+        r->assbackwards = 0;
+        r->connection->keepalive = AP_CONN_CLOSE;
+        r->proto_num = HTTP_VERSION(1, 0);
+        r->protocol  = apr_pstrdup(r->pool, "HTTP/1.0");
+    }
+    return 0;
+}
+
+static int table_do_fn_check_lengths(void *r_, const char *key,
+                                     const char *value)
+{
+    request_rec *r = r_;
+    if (value == NULL || r->server->limit_req_fieldsize >= strlen(value) )
+        return 1;
+
+    r->status = HTTP_BAD_REQUEST;
+    apr_table_setn(r->notes, "error-notes",
+                   "Size of a request header field exceeds server limit.");
+    ap_log_rerror(APLOG_MARK, APLOG_INFO, 0, r, APLOGNO(00560) "Request "
+                  "header exceeds LimitRequestFieldSize after merging: %.*s",
+                  field_name_len(key), key);
+    return 0;
+}
+
+AP_DECLARE(void) ap_get_mime_headers_core(request_rec *r, apr_bucket_brigade *bb)
+{
+    char *last_field = NULL;
+    apr_size_t last_len = 0;
+    apr_size_t alloc_len = 0;
+    char *field;
+    char *value;
+    apr_size_t len;
+    int fields_read = 0;
+    char *tmp_field;
+    core_server_config *conf = ap_get_core_module_config(r->server->module_config);
+    int strict = (conf->http_conformance != AP_HTTP_CONFORMANCE_UNSAFE);
+
+    /*
+     * Read header lines until we get the empty separator line, a read error,
+     * the connection closes (EOF), reach the server limit, or we timeout.
+     */
+    while(1) {
+        apr_status_t rv;
+
+        field = NULL;
+        rv = ap_rgetline(&field, r->server->limit_req_fieldsize + 2,
+                         &len, r, strict ? AP_GETLINE_CRLF : 0, bb);
+
+        if (rv != APR_SUCCESS) {
+            if (APR_STATUS_IS_TIMEUP(rv)) {
+                r->status = HTTP_REQUEST_TIME_OUT;
+            }
+            else {
+                ap_log_rerror(APLOG_MARK, APLOG_DEBUG, rv, r, 
+                              "Failed to read request header line %s", field);
+                r->status = HTTP_BAD_REQUEST;
+            }
+
+            /* ap_rgetline returns APR_ENOSPC if it fills up the buffer before
+             * finding the end-of-line.  This is only going to happen if it
+             * exceeds the configured limit for a field size.
+             */
+            if (rv == APR_ENOSPC) {
+                apr_table_setn(r->notes, "error-notes",
+                               "Size of a request header field "
+                               "exceeds server limit.");
+                ap_log_rerror(APLOG_MARK, APLOG_INFO, 0, r, APLOGNO(00561)
+                              "Request header exceeds LimitRequestFieldSize%s"
+                              "%.*s",
+                              (field && *field) ? ": " : "",
+                              (field) ? field_name_len(field) : 0,
+                              (field) ? field : "");
+            }
+            return;
+        }
+
+        /* For all header values, and all obs-fold lines, the presence of
+         * additional whitespace is a no-op, so collapse trailing whitespace
+         * to save buffer allocation and optimize copy operations.
+         * Do not remove the last single whitespace under any condition.
+         */
+        while (len > 1 && (field[len-1] == '\t' || field[len-1] == ' ')) {
+            field[--len] = '\0';
+        } 
+
+        if (*field == '\t' || *field == ' ') {
+
+            /* Append any newly-read obs-fold line onto the preceding
+             * last_field line we are processing
+             */
+            apr_size_t fold_len;
+
+            if (last_field == NULL) {
+                r->status = HTTP_BAD_REQUEST;
+                ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(03442)
+                              "Line folding encountered before first"
+                              " header line");
+                return;
+            }
+
+            if (field[1] == '\0') {
+                r->status = HTTP_BAD_REQUEST;
+                ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(03443)
+                              "Empty folded line encountered");
+                return;
+            }
+
+            /* Leading whitespace on an obs-fold line can be
+             * similarly discarded */
+            while (field[1] == '\t' || field[1] == ' ') {
+                ++field; --len;
+            }
+
+            /* This line is a continuation of the preceding line(s),
+             * so append it to the line that we've set aside.
+             * Note: this uses a power-of-two allocator to avoid
+             * doing O(n) allocs and using O(n^2) space for
+             * continuations that span many many lines.
+             */
+            fold_len = last_len + len + 1; /* trailing null */
+
+            if (fold_len >= (apr_size_t)(r->server->limit_req_fieldsize)) {
+                r->status = HTTP_BAD_REQUEST;
+                /* report what we have accumulated so far before the
+                 * overflow (last_field) as the field with the problem
+                 */
+                apr_table_setn(r->notes, "error-notes",
+                               "Size of a request header field "
+                               "exceeds server limit.");
+                ap_log_rerror(APLOG_MARK, APLOG_INFO, 0, r, APLOGNO(00562)
+                              "Request header exceeds LimitRequestFieldSize "
+                              "after folding: %.*s",
+                              field_name_len(last_field), last_field);
+                return;
+            }
+
+            if (fold_len > alloc_len) {
+                char *fold_buf;
+                alloc_len += alloc_len;
+                if (fold_len > alloc_len) {
+                    alloc_len = fold_len;
+                }
+                fold_buf = (char *)apr_palloc(r->pool, alloc_len);
+                memcpy(fold_buf, last_field, last_len);
+                last_field = fold_buf;
+            }
+            memcpy(last_field + last_len, field, len +1); /* +1 for nul */
+            /* Replace obs-fold w/ SP per RFC 7230 3.2.4 */
+            last_field[last_len] = ' ';
+            last_len += len;
+
+            /* We've appended this obs-fold line to last_len, proceed to
+             * read the next input line
+             */
+            continue;
+        }
+        else if (last_field != NULL) {
+
+            /* Process the previous last_field header line with all obs-folded
+             * segments already concatenated (this is not operating on the
+             * most recently read input line).
+             */
+
+            if (r->server->limit_req_fields
+                    && (++fields_read > r->server->limit_req_fields)) {
+                r->status = HTTP_BAD_REQUEST;
+                apr_table_setn(r->notes, "error-notes",
+                               "The number of request header fields "
+                               "exceeds this server's limit.");
+                ap_log_rerror(APLOG_MARK, APLOG_INFO, 0, r, APLOGNO(00563)
+                              "Number of request headers exceeds "
+                              "LimitRequestFields");
+                return;
+            }
+
+            if (!strict)
+            {
+                /* Not Strict ('Unsafe' mode), using the legacy parser */
+
+                if (!(value = strchr(last_field, ':'))) { /* Find ':' or */
+                    r->status = HTTP_BAD_REQUEST;   /* abort bad request */
+                    ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(00564)
+                                  "Request header field is missing ':' "
+                                  "separator: %.*s", (int)LOG_NAME_MAX_LEN,
+                                  last_field);
+                    return;
+                }
+
+                if (value == last_field) {
+                    r->status = HTTP_BAD_REQUEST;
+                    ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(03453)
+                                  "Request header field name was empty");
+                    return;
+                }
+
+                *value++ = '\0'; /* NUL-terminate at colon */
+
+                if (strpbrk(last_field, "\t\n\v\f\r ")) {
+                    r->status = HTTP_BAD_REQUEST;
+                    ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(03452)
+                                  "Request header field name presented"
+                                  " invalid whitespace");
+                    return;
+                }
+
+                while (*value == ' ' || *value == '\t') {
+                     ++value;            /* Skip to start of value   */
+                }
+
+                if (strpbrk(value, "\n\v\f\r")) {
+                    r->status = HTTP_BAD_REQUEST;
+                    ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(03451)
+                                  "Request header field value presented"
+                                  " bad whitespace");
+                    return;
+                }
+            }
+            else /* Using strict RFC7230 parsing */
+            {
+                /* Ensure valid token chars before ':' per RFC 7230 3.2.4 */
+                value = (char *)ap_scan_http_token(last_field);
+                if ((value == last_field) || *value != ':') {
+                    r->status = HTTP_BAD_REQUEST;
+                    ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(02426)
+                                  "Request header field name is malformed: "
+                                  "%.*s", (int)LOG_NAME_MAX_LEN, last_field);
+                    return;
+                }
+
+                *value++ = '\0'; /* NUL-terminate last_field name at ':' */
+
+                while (*value == ' ' || *value == '\t') {
+                    ++value;     /* Skip LWS of value */
+                }
+
+                /* Find invalid, non-HT ctrl char, or the trailing NULL */
+                tmp_field = (char *)ap_scan_http_field_content(value);
+
+                /* Reject value for all garbage input (CTRLs excluding HT)
+                 * e.g. only VCHAR / SP / HT / obs-text are allowed per
+                 * RFC7230 3.2.6 - leave all more explicit rule enforcement
+                 * for specific header handler logic later in the cycle
+                 */
+                if (*tmp_field != '\0') {
+                    r->status = HTTP_BAD_REQUEST;
+                    ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(02427)
+                                  "Request header value is malformed: "
+                                  "%.*s", (int)LOG_NAME_MAX_LEN, value);
+                    return;
+                }
+            }
+
+            apr_table_addn(r->headers_in, last_field, value);
+
+            /* This last_field header is now stored in headers_in,
+             * resume processing of the current input line.
+             */
+        }
+
+        /* Found the terminating empty end-of-headers line, stop. */
+        if (len == 0) {
+            break;
+        }
+
+        /* Keep track of this new header line so that we can extend it across
+         * any obs-fold or parse it on the next loop iteration. We referenced
+         * our previously allocated buffer in r->headers_in,
+         * so allocate a fresh buffer if required.
+         */
+        alloc_len = 0;
+        last_field = field;
+        last_len = len;
+    }
+
+    /* Combine multiple message-header fields with the same
+     * field-name, following RFC 2616, 4.2.
+     */
+    apr_table_compress(r->headers_in, APR_OVERLAP_TABLES_MERGE);
+
+    /* enforce LimitRequestFieldSize for merged headers */
+    apr_table_do(table_do_fn_check_lengths, r, r->headers_in, NULL);
+}
+
+AP_DECLARE(void) ap_get_mime_headers(request_rec *r)
+{
+    apr_bucket_brigade *tmp_bb;
+    tmp_bb = apr_brigade_create(r->pool, r->connection->bucket_alloc);
+    ap_get_mime_headers_core(r, tmp_bb);
+    apr_brigade_destroy(tmp_bb);
+}
+
+request_rec *ap_read_request(conn_rec *conn)
+{
+    request_rec *r;
+    apr_pool_t *p;
+    const char *expect;
+    int access_status;
+    apr_bucket_brigade *tmp_bb;
+    apr_socket_t *csd;
+    apr_interval_time_t cur_timeout;
+
+
+    apr_pool_create(&p, conn->pool);
+    apr_pool_tag(p, "request");
+    r = apr_pcalloc(p, sizeof(request_rec));
+    AP_READ_REQUEST_ENTRY((intptr_t)r, (uintptr_t)conn);
+    r->pool            = p;
+    r->connection      = conn;
+    r->server          = conn->base_server;
+
+    r->user            = NULL;
+    r->ap_auth_type    = NULL;
+
+    r->allowed_methods = ap_make_method_list(p, 2);
+
+    r->headers_in      = apr_table_make(r->pool, 25);
+    r->trailers_in     = apr_table_make(r->pool, 5);
+    r->subprocess_env  = apr_table_make(r->pool, 25);
+    r->headers_out     = apr_table_make(r->pool, 12);
+    r->err_headers_out = apr_table_make(r->pool, 5);
+    r->trailers_out    = apr_table_make(r->pool, 5);
+    r->notes           = apr_table_make(r->pool, 5);
+
+    r->request_config  = ap_create_request_config(r->pool);
+    /* Must be set before we run create request hook */
+
+    r->proto_output_filters = conn->output_filters;
+    r->output_filters  = r->proto_output_filters;
+    r->proto_input_filters = conn->input_filters;
+    r->input_filters   = r->proto_input_filters;
+    ap_run_create_request(r);
+    r->per_dir_config  = r->server->lookup_defaults;
+
+    r->sent_bodyct     = 0;                      /* bytect isn't for body */
+
+    r->read_length     = 0;
+    r->read_body       = REQUEST_NO_BODY;
+
+    r->status          = HTTP_OK;  /* Until further notice */
+    r->the_request     = NULL;
+
+    /* Begin by presuming any module can make its own path_info assumptions,
+     * until some module interjects and changes the value.
+     */
+    r->used_path_info = AP_REQ_DEFAULT_PATH_INFO;
+
+    r->useragent_addr = conn->client_addr;
+    r->useragent_ip = conn->client_ip;
+
+    tmp_bb = apr_brigade_create(r->pool, r->connection->bucket_alloc);
+
+    ap_run_pre_read_request(r, conn);
+
+    /* Get the request... */
+    if (!read_request_line(r, tmp_bb)) {
+        switch (r->status) {
+        case HTTP_REQUEST_URI_TOO_LARGE:
+        case HTTP_BAD_REQUEST:
+        case HTTP_VERSION_NOT_SUPPORTED:
+        case HTTP_NOT_IMPLEMENTED:
+            if (r->status == HTTP_REQUEST_URI_TOO_LARGE) {
+                ap_log_rerror(APLOG_MARK, APLOG_INFO, 0, r, APLOGNO(00565)
+                              "request failed: client's request-line exceeds LimitRequestLine (longer than %d)",
+                              r->server->limit_req_line);
+            }
+            else if (r->method == NULL) {
+                ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(00566)
+                              "request failed: malformed request line");
+            }
+            access_status = r->status;
+            r->status = HTTP_OK;
+            ap_die(access_status, r);
+            ap_update_child_status(conn->sbh, SERVER_BUSY_LOG, r);
+            ap_run_log_transaction(r);
+            r = NULL;
+            apr_brigade_destroy(tmp_bb);
+            goto traceout;
+        case HTTP_REQUEST_TIME_OUT:
+            ap_update_child_status(conn->sbh, SERVER_BUSY_LOG, NULL);
+            if (!r->connection->keepalives)
+                ap_run_log_transaction(r);
+            apr_brigade_destroy(tmp_bb);
+            goto traceout;
+        default:
+            apr_brigade_destroy(tmp_bb);
+            r = NULL;
+            goto traceout;
+        }
+    }
+
+    /* We may have been in keep_alive_timeout mode, so toggle back
+     * to the normal timeout mode as we fetch the header lines,
+     * as necessary.
+     */
+    csd = ap_get_conn_socket(conn);
+    apr_socket_timeout_get(csd, &cur_timeout);
+    if (cur_timeout != conn->base_server->timeout) {
+        apr_socket_timeout_set(csd, conn->base_server->timeout);
+        cur_timeout = conn->base_server->timeout;
+    }
+
+    if (!r->assbackwards) {
+        const char *tenc;
+
+        ap_get_mime_headers_core(r, tmp_bb);
+        if (r->status != HTTP_OK) {
+            ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(00567)
+                          "request failed: error reading the headers");
+            ap_send_error_response(r, 0);
+            ap_update_child_status(conn->sbh, SERVER_BUSY_LOG, r);
+            ap_run_log_transaction(r);
+            apr_brigade_destroy(tmp_bb);
+            goto traceout;
+        }
+
+        tenc = apr_table_get(r->headers_in, "Transfer-Encoding");
+        if (tenc) {
+            /* http://tools.ietf.org/html/draft-ietf-httpbis-p1-messaging-23
+             * Section 3.3.3.3: "If a Transfer-Encoding header field is
+             * present in a request and the chunked transfer coding is not
+             * the final encoding ...; the server MUST respond with the 400
+             * (Bad Request) status code and then close the connection".
+             */
+            if (!(strcasecmp(tenc, "chunked") == 0 /* fast path */
+                    || ap_find_last_token(r->pool, tenc, "chunked"))) {
+                ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(02539)
+                              "client sent unknown Transfer-Encoding "
+                              "(%s): %s", tenc, r->uri);
+                r->status = HTTP_BAD_REQUEST;
+                conn->keepalive = AP_CONN_CLOSE;
+                ap_send_error_response(r, 0);
+                ap_update_child_status(conn->sbh, SERVER_BUSY_LOG, r);
+                ap_run_log_transaction(r);
+                apr_brigade_destroy(tmp_bb);
+                goto traceout;
+            }
+
+            /* http://tools.ietf.org/html/draft-ietf-httpbis-p1-messaging-23
+             * Section 3.3.3.3: "If a message is received with both a
+             * Transfer-Encoding and a Content-Length header field, the
+             * Transfer-Encoding overrides the Content-Length. ... A sender
+             * MUST remove the received Content-Length field".
+             */
+            apr_table_unset(r->headers_in, "Content-Length");
+        }
+    }
+
+    apr_brigade_destroy(tmp_bb);
+
+    /* update what we think the virtual host is based on the headers we've
+     * now read. may update status.
+     */
+    ap_update_vhost_from_headers(r);
+    access_status = r->status;
+
+    /* Toggle to the Host:-based vhost's timeout mode to fetch the
+     * request body and send the response body, if needed.
+     */
+    if (cur_timeout != r->server->timeout) {
+        apr_socket_timeout_set(csd, r->server->timeout);
+        cur_timeout = r->server->timeout;
+    }
+
+    /* we may have switched to another server */
+    r->per_dir_config = r->server->lookup_defaults;
+
+    if ((!r->hostname && (r->proto_num >= HTTP_VERSION(1, 1)))
+        || ((r->proto_num == HTTP_VERSION(1, 1))
+            && !apr_table_get(r->headers_in, "Host"))) {
+        /*
+         * Client sent us an HTTP/1.1 or later request without telling us the
+         * hostname, either with a full URL or a Host: header. We therefore
+         * need to (as per the 1.1 spec) send an error.  As a special case,
+         * HTTP/1.1 mentions twice (S9, S14.23) that a request MUST contain
+         * a Host: header, and the server MUST respond with 400 if it doesn't.
+         */
+        access_status = HTTP_BAD_REQUEST;
+        ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(00569)
+                      "client sent HTTP/1.1 request without hostname "
+                      "(see RFC2616 section 14.23): %s", r->uri);
+    }
+
+    /*
+     * Add the HTTP_IN filter here to ensure that ap_discard_request_body
+     * called by ap_die and by ap_send_error_response works correctly on
+     * status codes that do not cause the connection to be dropped and
+     * in situations where the connection should be kept alive.
+     */
+
+    ap_add_input_filter_handle(ap_http_input_filter_handle,
+                               NULL, r, r->connection);
+
+    if (access_status != HTTP_OK
+        || (access_status = ap_run_post_read_request(r))) {
+        ap_die(access_status, r);
+        ap_update_child_status(conn->sbh, SERVER_BUSY_LOG, r);
+        ap_run_log_transaction(r);
+        r = NULL;
+        goto traceout;
+    }
+
+    if (((expect = apr_table_get(r->headers_in, "Expect")) != NULL)
+        && (expect[0] != '\0')) {
+        /*
+         * The Expect header field was added to HTTP/1.1 after RFC 2068
+         * as a means to signal when a 100 response is desired and,
+         * unfortunately, to signal a poor man's mandatory extension that
+         * the server must understand or return 417 Expectation Failed.
+         */
+        if (strcasecmp(expect, "100-continue") == 0) {
+            r->expecting_100 = 1;
+        }
+        else {
+            r->status = HTTP_EXPECTATION_FAILED;
+            ap_log_rerror(APLOG_MARK, APLOG_INFO, 0, r, APLOGNO(00570)
+                          "client sent an unrecognized expectation value of "
+                          "Expect: %s", expect);
+            ap_send_error_response(r, 0);
+            ap_update_child_status(conn->sbh, SERVER_BUSY_LOG, r);
+            ap_run_log_transaction(r);
+            goto traceout;
+        }
+    }
+
+    AP_READ_REQUEST_SUCCESS((uintptr_t)r, (char *)r->method, (char *)r->uri, (char *)r->server->defn_name, r->status);
+    return r;
+    traceout:
+    AP_READ_REQUEST_FAILURE((uintptr_t)r);
+    return r;
+}
+
+/* if a request with a body creates a subrequest, remove original request's
+ * input headers which pertain to the body which has already been read.
+ * out-of-line helper function for ap_set_sub_req_protocol.
+ */
+
+static void strip_headers_request_body(request_rec *rnew)
+{
+    apr_table_unset(rnew->headers_in, "Content-Encoding");
+    apr_table_unset(rnew->headers_in, "Content-Language");
+    apr_table_unset(rnew->headers_in, "Content-Length");
+    apr_table_unset(rnew->headers_in, "Content-Location");
+    apr_table_unset(rnew->headers_in, "Content-MD5");
+    apr_table_unset(rnew->headers_in, "Content-Range");
+    apr_table_unset(rnew->headers_in, "Content-Type");
+    apr_table_unset(rnew->headers_in, "Expires");
+    apr_table_unset(rnew->headers_in, "Last-Modified");
+    apr_table_unset(rnew->headers_in, "Transfer-Encoding");
+}
+
+/*
+ * A couple of other functions which initialize some of the fields of
+ * a request structure, as appropriate for adjuncts of one kind or another
+ * to a request in progress.  Best here, rather than elsewhere, since
+ * *someone* has to set the protocol-specific fields...
+ */
+
+AP_DECLARE(void) ap_set_sub_req_protocol(request_rec *rnew,
+                                         const request_rec *r)
+{
+    rnew->the_request     = r->the_request;  /* Keep original request-line */
+
+    rnew->assbackwards    = 1;   /* Don't send headers from this. */
+    rnew->no_local_copy   = 1;   /* Don't try to send HTTP_NOT_MODIFIED for a
+                                  * fragment. */
+    rnew->method          = "GET";
+    rnew->method_number   = M_GET;
+    rnew->protocol        = "INCLUDED";
+
+    rnew->status          = HTTP_OK;
+
+    rnew->headers_in      = apr_table_copy(rnew->pool, r->headers_in);
+    rnew->trailers_in     = apr_table_copy(rnew->pool, r->trailers_in);
+
+    /* did the original request have a body?  (e.g. POST w/SSI tags)
+     * if so, make sure the subrequest doesn't inherit body headers
+     */
+    if (!r->kept_body && (apr_table_get(r->headers_in, "Content-Length")
+        || apr_table_get(r->headers_in, "Transfer-Encoding"))) {
+        strip_headers_request_body(rnew);
+    }
+    rnew->subprocess_env  = apr_table_copy(rnew->pool, r->subprocess_env);
+    rnew->headers_out     = apr_table_make(rnew->pool, 5);
+    rnew->err_headers_out = apr_table_make(rnew->pool, 5);
+    rnew->trailers_out    = apr_table_make(rnew->pool, 5);
+    rnew->notes           = apr_table_make(rnew->pool, 5);
+
+    rnew->expecting_100   = r->expecting_100;
+    rnew->read_length     = r->read_length;
+    rnew->read_body       = REQUEST_NO_BODY;
+
+    rnew->main = (request_rec *) r;
+}
+
+static void end_output_stream(request_rec *r)
+{
+    conn_rec *c = r->connection;
+    apr_bucket_brigade *bb;
+    apr_bucket *b;
+
+    bb = apr_brigade_create(r->pool, c->bucket_alloc);
+    b = apr_bucket_eos_create(c->bucket_alloc);
+    APR_BRIGADE_INSERT_TAIL(bb, b);
+    ap_pass_brigade(r->output_filters, bb);
+}
+
+AP_DECLARE(void) ap_finalize_sub_req_protocol(request_rec *sub)
+{
+    /* tell the filter chain there is no more content coming */
+    if (!sub->eos_sent) {
+        end_output_stream(sub);
+    }
+}
+
+/* finalize_request_protocol is called at completion of sending the
+ * response.  Its sole purpose is to send the terminating protocol
+ * information for any wrappers around the response message body
+ * (i.e., transfer encodings).  It should have been named finalize_response.
+ */
+AP_DECLARE(void) ap_finalize_request_protocol(request_rec *r)
+{
+    (void) ap_discard_request_body(r);
+
+    /* tell the filter chain there is no more content coming */
+    if (!r->eos_sent) {
+        end_output_stream(r);
+    }
+}
+
+/*
+ * Support for the Basic authentication protocol, and a bit for Digest.
+ */
+AP_DECLARE(void) ap_note_auth_failure(request_rec *r)
+{
+    const char *type = ap_auth_type(r);
+    if (type) {
+        ap_run_note_auth_failure(r, type);
+    }
+    else {
+        ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, r, APLOGNO(00571)
+                      "need AuthType to note auth failure: %s", r->uri);
+    }
+}
+
+AP_DECLARE(void) ap_note_basic_auth_failure(request_rec *r)
+{
+    ap_note_auth_failure(r);
+}
+
+AP_DECLARE(void) ap_note_digest_auth_failure(request_rec *r)
+{
+    ap_note_auth_failure(r);
+}
+
+AP_DECLARE(int) ap_get_basic_auth_pw(request_rec *r, const char **pw)
+{
+    const char *auth_line = apr_table_get(r->headers_in,
+                                          (PROXYREQ_PROXY == r->proxyreq)
+                                              ? "Proxy-Authorization"
+                                              : "Authorization");
+    const char *t;
+
+    if (!(t = ap_auth_type(r)) || strcasecmp(t, "Basic"))
+        return DECLINED;
+
+    if (!ap_auth_name(r)) {
+        ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, r, APLOGNO(00572) 
+                      "need AuthName: %s", r->uri);
+        return HTTP_INTERNAL_SERVER_ERROR;
+    }
+
+    if (!auth_line) {
+        ap_note_auth_failure(r);
+        return HTTP_UNAUTHORIZED;
+    }
+
+    if (strcasecmp(ap_getword(r->pool, &auth_line, ' '), "Basic")) {
+        /* Client tried to authenticate using wrong auth scheme */
+        ap_log_rerror(APLOG_MARK, APLOG_INFO, 0, r, APLOGNO(00573)
+                      "client used wrong authentication scheme: %s", r->uri);
+        ap_note_auth_failure(r);
+        return HTTP_UNAUTHORIZED;
+    }
+
+    while (*auth_line == ' ' || *auth_line == '\t') {
+        auth_line++;
+    }
+
+    t = ap_pbase64decode(r->pool, auth_line);
+    r->user = ap_getword_nulls (r->pool, &t, ':');
+    apr_table_setn(r->notes, AP_GET_BASIC_AUTH_PW_NOTE, "1");
+    r->ap_auth_type = "Basic";
+
+    *pw = t;
+
+    return OK;
+}
+
+AP_DECLARE(apr_status_t) ap_get_basic_auth_components(const request_rec *r,
+                                                      const char **username,
+                                                      const char **password)
+{
+    const char *auth_header;
+    const char *credentials;
+    const char *decoded;
+    const char *user;
+
+    auth_header = (PROXYREQ_PROXY == r->proxyreq) ? "Proxy-Authorization"
+                                                  : "Authorization";
+    credentials = apr_table_get(r->headers_in, auth_header);
+
+    if (!credentials) {
+        /* No auth header. */
+        return APR_EINVAL;
+    }
+
+    if (ap_cstr_casecmp(ap_getword(r->pool, &credentials, ' '), "Basic")) {
+        /* These aren't Basic credentials. */
+        return APR_EINVAL;
+    }
+
+    while (*credentials == ' ' || *credentials == '\t') {
+        credentials++;
+    }
+
+    /* XXX Our base64 decoding functions don't actually error out if the string
+     * we give it isn't base64; they'll just silently stop and hand us whatever
+     * they've parsed up to that point.
+     *
+     * Since this function is supposed to be a drop-in replacement for the
+     * deprecated ap_get_basic_auth_pw(), don't fix this for 2.4.x.
+     */
+    decoded = ap_pbase64decode(r->pool, credentials);
+    user = ap_getword_nulls(r->pool, &decoded, ':');
+
+    if (username) {
+        *username = user;
+    }
+    if (password) {
+        *password = decoded;
+    }
+
+    return APR_SUCCESS;
+}
+
+struct content_length_ctx {
+    int data_sent;  /* true if the C-L filter has already sent at
+                     * least one bucket on to the next output filter
+                     * for this request
+                     */
+    apr_bucket_brigade *tmpbb;
+};
+
+/* This filter computes the content length, but it also computes the number
+ * of bytes sent to the client.  This means that this filter will always run
+ * through all of the buckets in all brigades
+ */
+AP_CORE_DECLARE_NONSTD(apr_status_t) ap_content_length_filter(
+    ap_filter_t *f,
+    apr_bucket_brigade *b)
+{
+    request_rec *r = f->r;
+    struct content_length_ctx *ctx;
+    apr_bucket *e;
+    int eos = 0;
+    apr_read_type_e eblock = APR_NONBLOCK_READ;
+
+    ctx = f->ctx;
+    if (!ctx) {
+        f->ctx = ctx = apr_palloc(r->pool, sizeof(*ctx));
+        ctx->data_sent = 0;
+        ctx->tmpbb = apr_brigade_create(r->pool, r->connection->bucket_alloc);
+    }
+
+    /* Loop through the brigade to count the length. To avoid
+     * arbitrary memory consumption with morphing bucket types, this
+     * loop will stop and pass on the brigade when necessary. */
+    e = APR_BRIGADE_FIRST(b);
+    while (e != APR_BRIGADE_SENTINEL(b)) {
+        apr_status_t rv;
+
+        if (APR_BUCKET_IS_EOS(e)) {
+            eos = 1;
+            break;
+        }
+        /* For a flush bucket, fall through to pass the brigade and
+         * flush now. */
+        else if (APR_BUCKET_IS_FLUSH(e)) {
+            e = APR_BUCKET_NEXT(e);
+        }
+        /* For metadata bucket types other than FLUSH, loop. */
+        else if (APR_BUCKET_IS_METADATA(e)) {
+            e = APR_BUCKET_NEXT(e);
+            continue;
+        }
+        /* For determinate length data buckets, count the length and
+         * continue. */
+        else if (e->length != (apr_size_t)-1) {
+            r->bytes_sent += e->length;
+            e = APR_BUCKET_NEXT(e);
+            continue;
+        }
+        /* For indeterminate length data buckets, perform one read. */
+        else /* e->length == (apr_size_t)-1 */ {
+            apr_size_t len;
+            const char *ignored;
+        
+            rv = apr_bucket_read(e, &ignored, &len, eblock);
+            if ((rv != APR_SUCCESS) && !APR_STATUS_IS_EAGAIN(rv)) {
+                ap_log_rerror(APLOG_MARK, APLOG_ERR, rv, r, APLOGNO(00574)
+                              "ap_content_length_filter: "
+                              "apr_bucket_read() failed");
+                return rv;
+            }
+            if (rv == APR_SUCCESS) {
+                eblock = APR_NONBLOCK_READ;
+                e = APR_BUCKET_NEXT(e);
+                r->bytes_sent += len;
+            }
+            else if (APR_STATUS_IS_EAGAIN(rv)) {
+                apr_bucket *flush;
+
+                /* Next read must block. */
+                eblock = APR_BLOCK_READ;
+
+                /* Ensure the last bucket to pass down is a flush if
+                 * the next read will block. */
+                flush = apr_bucket_flush_create(f->c->bucket_alloc);
+                APR_BUCKET_INSERT_BEFORE(e, flush);
+            }
+        }
+
+        /* Optimization: if the next bucket is EOS (directly after a
+         * bucket morphed to the heap, or a flush), short-cut to
+         * handle EOS straight away - allowing C-L to be determined
+         * for content which is already entirely in memory. */
+        if (e != APR_BRIGADE_SENTINEL(b) && APR_BUCKET_IS_EOS(e)) {
+            continue;
+        }
+
+        /* On reaching here, pass on everything in the brigade up to
+         * this point. */
+        apr_brigade_split_ex(b, e, ctx->tmpbb);
+        
+        rv = ap_pass_brigade(f->next, b);
+        if (rv != APR_SUCCESS) {
+            return rv;
+        }
+        else if (f->c->aborted) {
+            return APR_ECONNABORTED;
+        }
+        apr_brigade_cleanup(b);
+        APR_BRIGADE_CONCAT(b, ctx->tmpbb);
+        e = APR_BRIGADE_FIRST(b);
+        
+        ctx->data_sent = 1;
+    }
+
+    /* If we've now seen the entire response and it's otherwise
+     * okay to set the C-L in the response header, then do so now.
+     *
+     * We can only set a C-L in the response header if we haven't already
+     * sent any buckets on to the next output filter for this request.
+     */
+    if (ctx->data_sent == 0 && eos &&
+        /* don't whack the C-L if it has already been set for a HEAD
+         * by something like proxy.  the brigade only has an EOS bucket
+         * in this case, making r->bytes_sent zero.
+         *
+         * if r->bytes_sent > 0 we have a (temporary) body whose length may
+         * have been changed by a filter.  the C-L header might not have been
+         * updated so we do it here.  long term it would be cleaner to have
+         * such filters update or remove the C-L header, and just use it
+         * if present.
+         */
+        !((r->header_only || AP_STATUS_IS_HEADER_ONLY(r->status)) && r->bytes_sent == 0 &&
+            apr_table_get(r->headers_out, "Content-Length"))) {
+        ap_set_content_length(r, r->bytes_sent);
+    }
+
+    ctx->data_sent = 1;
+    return ap_pass_brigade(f->next, b);
+}
+
+/*
+ * Send the body of a response to the client.
+ */
+AP_DECLARE(apr_status_t) ap_send_fd(apr_file_t *fd, request_rec *r,
+                                    apr_off_t offset, apr_size_t len,
+                                    apr_size_t *nbytes)
+{
+    conn_rec *c = r->connection;
+    apr_bucket_brigade *bb = NULL;
+    apr_status_t rv;
+
+    bb = apr_brigade_create(r->pool, c->bucket_alloc);
+
+    apr_brigade_insert_file(bb, fd, offset, len, r->pool);
+
+    rv = ap_pass_brigade(r->output_filters, bb);
+    if (rv != APR_SUCCESS) {
+        *nbytes = 0; /* no way to tell how many were actually sent */
+    }
+    else {
+        *nbytes = len;
+    }
+
+    return rv;
+}
+
+#if APR_HAS_MMAP
+/* send data from an in-memory buffer */
+AP_DECLARE(apr_size_t) ap_send_mmap(apr_mmap_t *mm,
+                                    request_rec *r,
+                                    apr_size_t offset,
+                                    apr_size_t length)
+{
+    conn_rec *c = r->connection;
+    apr_bucket_brigade *bb = NULL;
+    apr_bucket *b;
+
+    bb = apr_brigade_create(r->pool, c->bucket_alloc);
+    b = apr_bucket_mmap_create(mm, offset, length, c->bucket_alloc);
+    APR_BRIGADE_INSERT_TAIL(bb, b);
+    ap_pass_brigade(r->output_filters, bb);
+
+    return mm->size; /* XXX - change API to report apr_status_t? */
+}
+#endif /* APR_HAS_MMAP */
+
+typedef struct {
+    apr_bucket_brigade *bb;
+    apr_bucket_brigade *tmpbb;
+} old_write_filter_ctx;
+
+AP_CORE_DECLARE_NONSTD(apr_status_t) ap_old_write_filter(
+    ap_filter_t *f, apr_bucket_brigade *bb)
+{
+    old_write_filter_ctx *ctx = f->ctx;
+
+    AP_DEBUG_ASSERT(ctx);
+
+    if (ctx->bb != NULL) {
+        /* whatever is coming down the pipe (we don't care), we
+         * can simply insert our buffered data at the front and
+         * pass the whole bundle down the chain.
+         */
+        APR_BRIGADE_PREPEND(bb, ctx->bb);
+    }
+
+    return ap_pass_brigade(f->next, bb);
+}
+
+static ap_filter_t *insert_old_write_filter(request_rec *r)
+{
+    ap_filter_t *f;
+    old_write_filter_ctx *ctx;
+
+    /* future optimization: record some flags in the request_rec to
+     * say whether we've added our filter, and whether it is first.
+     */
+
+    /* this will typically exit on the first test */
+    for (f = r->output_filters; f != NULL; f = f->next) {
+        if (ap_old_write_func == f->frec)
+            break;
+    }
+
+    if (f == NULL) {
+        /* our filter hasn't been added yet */
+        ctx = apr_pcalloc(r->pool, sizeof(*ctx));
+        ctx->tmpbb = apr_brigade_create(r->pool, r->connection->bucket_alloc);
+
+        ap_add_output_filter("OLD_WRITE", ctx, r, r->connection);
+        f = r->output_filters;
+    }
+
+    return f;
+}
+
+static apr_status_t buffer_output(request_rec *r,
+                                  const char *str, apr_size_t len)
+{
+    conn_rec *c = r->connection;
+    ap_filter_t *f;
+    old_write_filter_ctx *ctx;
+
+    if (len == 0)
+        return APR_SUCCESS;
+
+    f = insert_old_write_filter(r);
+    ctx = f->ctx;
+
+    /* if the first filter is not our buffering filter, then we have to
+     * deliver the content through the normal filter chain
+     */
+    if (f != r->output_filters) {
+        apr_status_t rv;
+        apr_bucket *b = apr_bucket_transient_create(str, len, c->bucket_alloc);
+        APR_BRIGADE_INSERT_TAIL(ctx->tmpbb, b);
+
+        rv = ap_pass_brigade(r->output_filters, ctx->tmpbb);
+        apr_brigade_cleanup(ctx->tmpbb);
+        return rv;
+    }
+
+    if (ctx->bb == NULL) {
+        ctx->bb = apr_brigade_create(r->pool, c->bucket_alloc);
+    }
+
+    return ap_fwrite(f->next, ctx->bb, str, len);
+}
+
+AP_DECLARE(int) ap_rputc(int c, request_rec *r)
+{
+    char c2 = (char)c;
+
+    if (r->connection->aborted) {
+        return -1;
+    }
+
+    if (buffer_output(r, &c2, 1) != APR_SUCCESS)
+        return -1;
+
+    return c;
+}
+
+AP_DECLARE(int) ap_rwrite(const void *buf, int nbyte, request_rec *r)
+{
+    if (r->connection->aborted)
+        return -1;
+
+    if (buffer_output(r, buf, nbyte) != APR_SUCCESS)
+        return -1;
+
+    return nbyte;
+}
+
+struct ap_vrprintf_data {
+    apr_vformatter_buff_t vbuff;
+    request_rec *r;
+    char *buff;
+};
+
+/* Flush callback for apr_vformatter; returns -1 on error. */
+static int r_flush(apr_vformatter_buff_t *buff)
+{
+    /* callback function passed to ap_vformatter to be called when
+     * vformatter needs to write into buff and buff.curpos > buff.endpos */
+
+    /* ap_vrprintf_data passed as a apr_vformatter_buff_t, which is then
+     * "downcast" to an ap_vrprintf_data */
+    struct ap_vrprintf_data *vd = (struct ap_vrprintf_data*)buff;
+
+    if (vd->r->connection->aborted)
+        return -1;
+
+    /* r_flush is called when vbuff is completely full */
+    if (buffer_output(vd->r, vd->buff, AP_IOBUFSIZE)) {
+        return -1;
+    }
+
+    /* reset the buffer position */
+    vd->vbuff.curpos = vd->buff;
+    vd->vbuff.endpos = vd->buff + AP_IOBUFSIZE;
+
+    return 0;
+}
+
+AP_DECLARE(int) ap_vrprintf(request_rec *r, const char *fmt, va_list va)
+{
+    apr_size_t written;
+    struct ap_vrprintf_data vd;
+    char vrprintf_buf[AP_IOBUFSIZE];
+
+    vd.vbuff.curpos = vrprintf_buf;
+    vd.vbuff.endpos = vrprintf_buf + AP_IOBUFSIZE;
+    vd.r = r;
+    vd.buff = vrprintf_buf;
+
+    if (r->connection->aborted)
+        return -1;
+
+    written = apr_vformatter(r_flush, &vd.vbuff, fmt, va);
+
+    if (written != -1) {
+        int n = vd.vbuff.curpos - vrprintf_buf;
+
+        /* last call to buffer_output, to finish clearing the buffer */
+        if (buffer_output(r, vrprintf_buf,n) != APR_SUCCESS)
+            return -1;
+
+        written += n;
+    }
+
+    return written;
+}
+
+AP_DECLARE_NONSTD(int) ap_rprintf(request_rec *r, const char *fmt, ...)
+{
+    va_list va;
+    int n;
+
+    if (r->connection->aborted)
+        return -1;
+
+    va_start(va, fmt);
+    n = ap_vrprintf(r, fmt, va);
+    va_end(va);
+
+    return n;
+}
+
+AP_DECLARE_NONSTD(int) ap_rvputs(request_rec *r, ...)
+{
+    va_list va;
+    const char *s;
+    apr_size_t len;
+    apr_size_t written = 0;
+
+    if (r->connection->aborted)
+        return -1;
+
+    /* ### TODO: if the total output is large, put all the strings
+     * ### into a single brigade, rather than flushing each time we
+     * ### fill the buffer
+     */
+    va_start(va, r);
+    while (1) {
+        s = va_arg(va, const char *);
+        if (s == NULL)
+            break;
+
+        len = strlen(s);
+        if (buffer_output(r, s, len) != APR_SUCCESS) {
+            return -1;
+        }
+
+        written += len;
+    }
+    va_end(va);
+
+    return written;
+}
+
+AP_DECLARE(int) ap_rflush(request_rec *r)
+{
+    conn_rec *c = r->connection;
+    apr_bucket *b;
+    ap_filter_t *f;
+    old_write_filter_ctx *ctx;
+    apr_status_t rv;
+
+    f = insert_old_write_filter(r);
+    ctx = f->ctx;
+
+    b = apr_bucket_flush_create(c->bucket_alloc);
+    APR_BRIGADE_INSERT_TAIL(ctx->tmpbb, b);
+
+    rv = ap_pass_brigade(r->output_filters, ctx->tmpbb);
+    apr_brigade_cleanup(ctx->tmpbb);
+    if (rv != APR_SUCCESS)
+        return -1;
+
+    return 0;
+}
+
+/*
+ * This function sets the Last-Modified output header field to the value
+ * of the mtime field in the request structure - rationalized to keep it from
+ * being in the future.
+ */
+AP_DECLARE(void) ap_set_last_modified(request_rec *r)
+{
+    if (!r->assbackwards) {
+        apr_time_t mod_time = ap_rationalize_mtime(r, r->mtime);
+        char *datestr = apr_palloc(r->pool, APR_RFC822_DATE_LEN);
+
+        apr_rfc822_date(datestr, mod_time);
+        apr_table_setn(r->headers_out, "Last-Modified", datestr);
+    }
+}
+
+typedef struct hdr_ptr {
+    ap_filter_t *f;
+    apr_bucket_brigade *bb;
+} hdr_ptr;
+ 
+#if APR_CHARSET_EBCDIC
+static int send_header(void *data, const char *key, const char *val)
+{
+    char *header_line = NULL;
+    hdr_ptr *hdr = (hdr_ptr*)data;
+
+    header_line = apr_pstrcat(hdr->bb->p, key, ": ", val, CRLF, NULL);
+    ap_xlate_proto_to_ascii(header_line, strlen(header_line));
+    ap_fputs(hdr->f, hdr->bb, header_line);
+    return 1;
+}
+#else
+static int send_header(void *data, const char *key, const char *val)
+{
+     ap_fputstrs(((hdr_ptr*)data)->f, ((hdr_ptr*)data)->bb,
+                 key, ": ", val, CRLF, NULL);
+     return 1;
+ }
+#endif
+
+AP_DECLARE(void) ap_send_interim_response(request_rec *r, int send_headers)
+{
+    hdr_ptr x;
+    char *status_line = NULL;
+    request_rec *rr;
+
+    if (r->proto_num < HTTP_VERSION(1,1)) {
+        /* don't send interim response to HTTP/1.0 Client */
+        return;
+    }
+    if (!ap_is_HTTP_INFO(r->status)) {
+        ap_log_rerror(APLOG_MARK, APLOG_DEBUG, 0, r, APLOGNO(00575)
+                      "Status is %d - not sending interim response", r->status);
+        return;
+    }
+    if ((r->status == HTTP_CONTINUE) && !r->expecting_100) {
+        /*
+         * Don't send 100-Continue when there was no Expect: 100-continue
+         * in the request headers. For origin servers this is a SHOULD NOT
+         * for proxies it is a MUST NOT according to RFC 2616 8.2.3
+         */
+        return;
+    }
+
+    /* if we send an interim response, we're no longer in a state of
+     * expecting one.  Also, this could feasibly be in a subrequest,
+     * so we need to propagate the fact that we responded.
+     */
+    for (rr = r; rr != NULL; rr = rr->main) {
+        rr->expecting_100 = 0;
+    }
+
+    status_line = apr_pstrcat(r->pool, AP_SERVER_PROTOCOL, " ", r->status_line, CRLF, NULL);
+    ap_xlate_proto_to_ascii(status_line, strlen(status_line));
+
+    x.f = r->connection->output_filters;
+    x.bb = apr_brigade_create(r->pool, r->connection->bucket_alloc);
+
+    ap_fputs(x.f, x.bb, status_line);
+    if (send_headers) {
+        apr_table_do(send_header, &x, r->headers_out, NULL);
+        apr_table_clear(r->headers_out);
+    }
+    ap_fputs(x.f, x.bb, CRLF_ASCII);
+    ap_fflush(x.f, x.bb);
+    apr_brigade_destroy(x.bb);
+}
+
+/*
+ * Compare two protocol identifier. Result is similar to strcmp():
+ * 0 gives same precedence, >0 means proto1 is preferred.
+ */
+static int protocol_cmp(const apr_array_header_t *preferences,
+                        const char *proto1,
+                        const char *proto2)
+{
+    if (preferences && preferences->nelts > 0) {
+        int index1 = ap_array_str_index(preferences, proto1, 0);
+        int index2 = ap_array_str_index(preferences, proto2, 0);
+        if (index2 > index1) {
+            return (index1 >= 0) ? 1 : -1;
+        }
+        else if (index1 > index2) {
+            return (index2 >= 0) ? -1 : 1;
+        }
+    }
+    /* both have the same index (mabye -1 or no pref configured) and we compare
+     * the names so that spdy3 gets precedence over spdy2. That makes
+     * the outcome at least deterministic. */
+    return strcmp(proto1, proto2);
+}
+
+AP_DECLARE(const char *) ap_get_protocol(conn_rec *c)
+{
+    const char *protocol = ap_run_protocol_get(c);
+    return protocol? protocol : AP_PROTOCOL_HTTP1;
+}
+
+AP_DECLARE(apr_status_t) ap_get_protocol_upgrades(conn_rec *c, request_rec *r, 
+                                                  server_rec *s, int report_all, 
+                                                  const apr_array_header_t **pupgrades)
+{
+    apr_pool_t *pool = r? r->pool : c->pool;
+    core_server_config *conf;
+    const char *existing;
+    apr_array_header_t *upgrades = NULL;
+
+    if (!s) {
+        s = (r? r->server : c->base_server);
+    }
+    conf = ap_get_core_module_config(s->module_config);
+    
+    if (conf->protocols->nelts > 0) {
+        existing = ap_get_protocol(c);
+        if (conf->protocols->nelts > 1 
+            || !ap_array_str_contains(conf->protocols, existing)) {
+            int i;
+            
+            /* possibly more than one choice or one, but not the
+             * existing. (TODO: maybe 426 and Upgrade then?) */
+            upgrades = apr_array_make(pool, conf->protocols->nelts + 1, 
+                                      sizeof(char *));
+            for (i = 0; i < conf->protocols->nelts; i++) {
+                const char *p = APR_ARRAY_IDX(conf->protocols, i, char *);
+                if (strcmp(existing, p)) {
+                    /* not the one we have and possible, add in this order */
+                    APR_ARRAY_PUSH(upgrades, const char*) = p;
+                }
+                else if (!report_all) {
+                    break;
+                }
+            }
+        }
+    }
+    
+    *pupgrades = upgrades;
+    return APR_SUCCESS;
+}
+
+AP_DECLARE(const char *) ap_select_protocol(conn_rec *c, request_rec *r, 
+                                            server_rec *s,
+                                            const apr_array_header_t *choices)
+{
+    apr_pool_t *pool = r? r->pool : c->pool;
+    core_server_config *conf;
+    const char *protocol = NULL, *existing;
+    apr_array_header_t *proposals;
+
+    if (!s) {
+        s = (r? r->server : c->base_server);
+    }
+    conf = ap_get_core_module_config(s->module_config);
+    
+    if (APLOGcdebug(c)) {
+        const char *p = apr_array_pstrcat(pool, conf->protocols, ',');
+        ap_log_cerror(APLOG_MARK, APLOG_DEBUG, 0, c, APLOGNO(03155) 
+                      "select protocol from %s, choices=%s for server %s", 
+                      p, apr_array_pstrcat(pool, choices, ','),
+                      s->server_hostname);
+    }
+
+    if (conf->protocols->nelts <= 0) {
+        /* nothing configured, by default, we only allow http/1.1 here.
+         * For now...
+         */
+        if (ap_array_str_contains(choices, AP_PROTOCOL_HTTP1)) {
+            return AP_PROTOCOL_HTTP1;
+        }
+        else {
+            return NULL;
+        }
+    }
+
+    proposals = apr_array_make(pool, choices->nelts + 1, sizeof(char *));
+    ap_run_protocol_propose(c, r, s, choices, proposals);
+
+    /* If the existing protocol has not been proposed, but is a choice,
+     * add it to the proposals implicitly.
+     */
+    existing = ap_get_protocol(c);
+    if (!ap_array_str_contains(proposals, existing)
+        && ap_array_str_contains(choices, existing)) {
+        APR_ARRAY_PUSH(proposals, const char*) = existing;
+    }
+
+    if (proposals->nelts > 0) {
+        int i;
+        const apr_array_header_t *prefs = NULL;
+
+        /* Default for protocols_honor_order is 'on' or != 0 */
+        if (conf->protocols_honor_order == 0 && choices->nelts > 0) {
+            prefs = choices;
+        }
+        else {
+            prefs = conf->protocols;
+        }
+
+        /* Select the most preferred protocol */
+        if (APLOGcdebug(c)) {
+            ap_log_cerror(APLOG_MARK, APLOG_DEBUG, 0, c, APLOGNO(03156) 
+                          "select protocol, proposals=%s preferences=%s configured=%s", 
+                          apr_array_pstrcat(pool, proposals, ','),
+                          apr_array_pstrcat(pool, prefs, ','),
+                          apr_array_pstrcat(pool, conf->protocols, ','));
+        }
+        for (i = 0; i < proposals->nelts; ++i) {
+            const char *p = APR_ARRAY_IDX(proposals, i, const char *);
+            if (!ap_array_str_contains(conf->protocols, p)) {
+                /* not a configured protocol here */
+                continue;
+            }
+            else if (!protocol 
+                     || (protocol_cmp(prefs, protocol, p) < 0)) {
+                /* none selected yet or this one has preference */
+                protocol = p;
+            }
+        }
+    }
+    if (APLOGcdebug(c)) {
+        ap_log_cerror(APLOG_MARK, APLOG_DEBUG, 0, c, APLOGNO(03157)
+                      "selected protocol=%s", 
+                      protocol? protocol : "(none)");
+    }
+
+    return protocol;
+}
+
+AP_DECLARE(apr_status_t) ap_switch_protocol(conn_rec *c, request_rec *r, 
+                                            server_rec *s,
+                                            const char *protocol)
+{
+    const char *current = ap_get_protocol(c);
+    int rc;
+    
+    if (!strcmp(current, protocol)) {
+        ap_log_cerror(APLOG_MARK, APLOG_WARNING, 0, c, APLOGNO(02906)
+                      "already at it, protocol_switch to %s", 
+                      protocol);
+        return APR_SUCCESS;
+    }
+    
+    rc = ap_run_protocol_switch(c, r, s, protocol);
+    switch (rc) {
+        case DECLINED:
+            ap_log_cerror(APLOG_MARK, APLOG_ERR, 0, c, APLOGNO(02907)
+                          "no implementation for protocol_switch to %s", 
+                          protocol);
+            return APR_ENOTIMPL;
+        case OK:
+        case DONE:
+            return APR_SUCCESS;
+        default:
+            ap_log_cerror(APLOG_MARK, APLOG_ERR, 0, c, APLOGNO(02905)
+                          "unexpected return code %d from protocol_switch to %s"
+                          , rc, protocol);
+            return APR_EOF;
+    }    
+}
+
+AP_DECLARE(int) ap_is_allowed_protocol(conn_rec *c, request_rec *r,
+                                       server_rec *s, const char *protocol)
+{
+    core_server_config *conf;
+
+    if (!s) {
+        s = (r? r->server : c->base_server);
+    }
+    conf = ap_get_core_module_config(s->module_config);
+    
+    if (conf->protocols->nelts > 0) {
+        return ap_array_str_contains(conf->protocols, protocol);
+    }
+    return !strcmp(AP_PROTOCOL_HTTP1, protocol);
+}
+
+
+AP_IMPLEMENT_HOOK_VOID(pre_read_request,
+                       (request_rec *r, conn_rec *c),
+                       (r, c))
+AP_IMPLEMENT_HOOK_RUN_ALL(int,post_read_request,
+                          (request_rec *r), (r), OK, DECLINED)
+AP_IMPLEMENT_HOOK_RUN_ALL(int,log_transaction,
+                          (request_rec *r), (r), OK, DECLINED)
+AP_IMPLEMENT_HOOK_RUN_FIRST(const char *,http_scheme,
+                            (const request_rec *r), (r), NULL)
+AP_IMPLEMENT_HOOK_RUN_FIRST(unsigned short,default_port,
+                            (const request_rec *r), (r), 0)
+AP_IMPLEMENT_HOOK_RUN_FIRST(int, note_auth_failure,
+                            (request_rec *r, const char *auth_type),
+                            (r, auth_type), DECLINED)
+AP_IMPLEMENT_HOOK_RUN_ALL(int,protocol_propose,
+                          (conn_rec *c, request_rec *r, server_rec *s,
+                           const apr_array_header_t *offers,
+                           apr_array_header_t *proposals), 
+                          (c, r, s, offers, proposals), OK, DECLINED)
+AP_IMPLEMENT_HOOK_RUN_FIRST(int,protocol_switch,
+                            (conn_rec *c, request_rec *r, server_rec *s,
+                             const char *protocol), 
+                            (c, r, s, protocol), DECLINED)
+AP_IMPLEMENT_HOOK_RUN_FIRST(const char *,protocol_get,
+                            (const conn_rec *c), (c), NULL)