From 372651ba7cc80d210af240ef1e34efe0029d8d1b Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Tue, 7 May 2024 04:06:00 +0200 Subject: Trimming default sites. Signed-off-by: Daniel Baumann --- .../sites-available/000-default-ssl.conf | 142 ++------------------- debian/config-dir/sites-available/000-default.conf | 26 +--- 2 files changed, 12 insertions(+), 156 deletions(-) (limited to 'debian/config-dir/sites-available') diff --git a/debian/config-dir/sites-available/000-default-ssl.conf b/debian/config-dir/sites-available/000-default-ssl.conf index cbc0d2b..00f9a51 100644 --- a/debian/config-dir/sites-available/000-default-ssl.conf +++ b/debian/config-dir/sites-available/000-default-ssl.conf @@ -1,135 +1,13 @@ - - - ServerName localhost - ServerAdmin root@localhost + + ServerName localhost + ServerAdmin root@localhost - DocumentRoot /var/www/html + DocumentRoot /var/www/html - # Available loglevels: trace8, ..., trace1, debug, info, notice, warn, - # error, crit, alert, emerg. - # It is also possible to configure the loglevel for particular - # modules, e.g. - #LogLevel info ssl:warn + SSLEngine on + SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key + SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem - ErrorLog ${APACHE_LOG_DIR}/error.log - CustomLog ${APACHE_LOG_DIR}/access.log combined - - # For most configuration files from conf-available/, which are - # enabled or disabled at a global level, it is possible to - # include a line for only one particular virtual host. For example the - # following line enables the CGI configuration for this host only - # after it has been globally disabled with "a2disconf". - #Include conf-available/serve-cgi-bin.conf - - # SSL Engine Switch: - # Enable/Disable SSL for this virtual host. - SSLEngine on - - # A self-signed (snakeoil) certificate can be created by installing - # the ssl-cert package. See - # /usr/share/doc/apache2/README.Debian.gz for more info. - # If both key and certificate are stored in the same file, only the - # SSLCertificateFile directive is needed. - SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem - SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key - - # Server Certificate Chain: - # Point SSLCertificateChainFile at a file containing the - # concatenation of PEM encoded CA certificates which form the - # certificate chain for the server certificate. Alternatively - # the referenced file can be the same as SSLCertificateFile - # when the CA certificates are directly appended to the server - # certificate for convinience. - #SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt - - # Certificate Authority (CA): - # Set the CA certificate verification path where to find CA - # certificates for client authentication or alternatively one - # huge file containing all of them (file must be PEM encoded) - # Note: Inside SSLCACertificatePath you need hash symlinks - # to point to the certificate files. Use the provided - # Makefile to update the hash symlinks after changes. - #SSLCACertificatePath /etc/ssl/certs/ - #SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt - - # Certificate Revocation Lists (CRL): - # Set the CA revocation path where to find CA CRLs for client - # authentication or alternatively one huge file containing all - # of them (file must be PEM encoded) - # Note: Inside SSLCARevocationPath you need hash symlinks - # to point to the certificate files. Use the provided - # Makefile to update the hash symlinks after changes. - #SSLCARevocationPath /etc/apache2/ssl.crl/ - #SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl - - # Client Authentication (Type): - # Client certificate verification type and depth. Types are - # none, optional, require and optional_no_ca. Depth is a - # number which specifies how deeply to verify the certificate - # issuer chain before deciding the certificate is not valid. - #SSLVerifyClient require - #SSLVerifyDepth 10 - - # SSL Engine Options: - # Set various options for the SSL engine. - # o FakeBasicAuth: - # Translate the client X.509 into a Basic Authorisation. This means that - # the standard Auth/DBMAuth methods can be used for access control. The - # user name is the `one line' version of the client's X.509 certificate. - # Note that no password is obtained from the user. Every entry in the user - # file needs this password: `xxj31ZMTZzkVA'. - # o ExportCertData: - # This exports two additional environment variables: SSL_CLIENT_CERT and - # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the - # server (always existing) and the client (only existing when client - # authentication is used). This can be used to import the certificates - # into CGI scripts. - # o StdEnvVars: - # This exports the standard SSL/TLS related `SSL_*' environment variables. - # Per default this exportation is switched off for performance reasons, - # because the extraction step is an expensive operation and is usually - # useless for serving static content. So one usually enables the - # exportation for CGI and SSI requests only. - # o OptRenegotiate: - # This enables optimized SSL connection renegotiation handling when SSL - # directives are used in per-directory context. - #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire - - SSLOptions +StdEnvVars - - - SSLOptions +StdEnvVars - - - # SSL Protocol Adjustments: - # The safe and default but still SSL/TLS standard compliant shutdown - # approach is that mod_ssl sends the close notify alert but doesn't wait for - # the close notify alert from client. When you need a different shutdown - # approach you can use one of the following variables: - # o ssl-unclean-shutdown: - # This forces an unclean shutdown when the connection is closed, i.e. no - # SSL close notify alert is send or allowed to received. This violates - # the SSL/TLS standard but is needed for some brain-dead browsers. Use - # this when you receive I/O errors because of the standard approach where - # mod_ssl sends the close notify alert. - # o ssl-accurate-shutdown: - # This forces an accurate shutdown when the connection is closed, i.e. a - # SSL close notify alert is send and mod_ssl waits for the close notify - # alert of the client. This is 100% SSL/TLS standard compliant, but in - # practice often causes hanging connections with brain-dead browsers. Use - # this only for browsers where you know that their SSL implementation - # works correctly. - # Notice: Most problems of broken clients are also related to the HTTP - # keep-alive facility, so you usually additionally want to disable - # keep-alive for those clients, too. Use variable "nokeepalive" for this. - # Similarly, one has to force some clients to use HTTP/1.0 to workaround - # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and - # "force-response-1.0" for this. - # BrowserMatch "MSIE [2-6]" \ - # nokeepalive ssl-unclean-shutdown \ - # downgrade-1.0 force-response-1.0 - - - - -# vim: syntax=apache ts=4 sw=4 sts=4 sr noet + ErrorLog ${APACHE_LOG_DIR}/error.log + CustomLog ${APACHE_LOG_DIR}/access.log combined + diff --git a/debian/config-dir/sites-available/000-default.conf b/debian/config-dir/sites-available/000-default.conf index 6154f1f..23bbcd3 100644 --- a/debian/config-dir/sites-available/000-default.conf +++ b/debian/config-dir/sites-available/000-default.conf @@ -1,31 +1,9 @@ - - # The ServerName directive sets the request scheme, hostname and port that - # the server uses to identify itself. This is used when creating - # redirection URLs. In the context of virtual hosts, the ServerName - # specifies what hostname must appear in the request's Host: header to - # match this virtual host. For the default virtual host (this file) this - # value is not decisive as it is used as a last resort host regardless. - # However, you must set it for any further virtual host explicitly. + ServerName localhost - ServerAdmin root@localhost - DocumentRoot /var/www/html - # Available loglevels: trace8, ..., trace1, debug, info, notice, warn, - # error, crit, alert, emerg. - # It is also possible to configure the loglevel for particular - # modules, e.g. - #LogLevel info ssl:warn + DocumentRoot /var/www/html ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined - - # For most configuration files from conf-available/, which are - # enabled or disabled at a global level, it is possible to - # include a line for only one particular virtual host. For example the - # following line enables the CGI configuration for this host only - # after it has been globally disabled with "a2disconf". - #Include conf-available/serve-cgi-bin.conf - -# vim: syntax=apache ts=4 sw=4 sts=4 sr noet -- cgit v1.2.3