/* Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. * The ASF licenses this file to You under the Apache License, Version 2.0 * (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ /* The purpose of this MPM is to fix the design flaws in the threaded * model. Because of the way that pthreads and mutex locks interact, * it is basically impossible to cleanly gracefully shutdown a child * process if multiple threads are all blocked in accept. This model * fixes those problems. */ #include "apr.h" #include "apr_portable.h" #include "apr_strings.h" #include "apr_file_io.h" #include "apr_thread_proc.h" #include "apr_signal.h" #include "apr_thread_mutex.h" #include "apr_proc_mutex.h" #include "apr_poll.h" #include #define APR_WANT_STRFUNC #include "apr_want.h" #if APR_HAVE_UNISTD_H #include #endif #if APR_HAVE_SYS_SOCKET_H #include #endif #if APR_HAVE_SYS_WAIT_H #include #endif #ifdef HAVE_SYS_PROCESSOR_H #include /* for bindprocessor() */ #endif #if !APR_HAS_THREADS #error The Worker MPM requires APR threads, but they are unavailable. #endif #include "ap_config.h" #include "httpd.h" #include "http_main.h" #include "http_log.h" #include "http_config.h" /* for read_config */ #include "http_core.h" /* for get_remote_host */ #include "http_connection.h" #include "ap_mpm.h" #include "mpm_common.h" #include "ap_listen.h" #include "scoreboard.h" #include "mpm_fdqueue.h" #include "mpm_default.h" #include "util_mutex.h" #include "unixd.h" #include #include /* for INT_MAX */ /* Limit on the total --- clients will be locked out if more servers than * this are needed. It is intended solely to keep the server from crashing * when things get out of hand. * * We keep a hard maximum number of servers, for two reasons --- first off, * in case something goes seriously wrong, we want to stop the fork bomb * short of actually crashing the machine we're running on by filling some * kernel table. Secondly, it keeps the size of the scoreboard file small * enough that we can read the whole thing without worrying too much about * the overhead. */ #ifndef DEFAULT_SERVER_LIMIT #define DEFAULT_SERVER_LIMIT 16 #endif /* Admin can't tune ServerLimit beyond MAX_SERVER_LIMIT. We want * some sort of compile-time limit to help catch typos. */ #ifndef MAX_SERVER_LIMIT #define MAX_SERVER_LIMIT 20000 #endif /* Limit on the threads per process. Clients will be locked out if more than * this * server_limit are needed. * * We keep this for one reason it keeps the size of the scoreboard file small * enough that we can read the whole thing without worrying too much about * the overhead. */ #ifndef DEFAULT_THREAD_LIMIT #define DEFAULT_THREAD_LIMIT 64 #endif /* Admin can't tune ThreadLimit beyond MAX_THREAD_LIMIT. We want * some sort of compile-time limit to help catch typos. */ #ifndef MAX_THREAD_LIMIT #define MAX_THREAD_LIMIT 20000 #endif /* * Actual definitions of config globals */ static int threads_per_child = 0; /* Worker threads per child */ static int ap_daemons_to_start = 0; static int min_spare_threads = 0; static int max_spare_threads = 0; static int ap_daemons_limit = 0; static int max_workers = 0; static int server_limit = 0; static int thread_limit = 0; static int had_healthy_child = 0; static int dying = 0; static int workers_may_exit = 0; static int start_thread_may_exit = 0; static int listener_may_exit = 0; static int requests_this_child; static int num_listensocks = 0; static int resource_shortage = 0; static fd_queue_t *worker_queue; static fd_queue_info_t *worker_queue_info; static apr_pollset_t *worker_pollset; /* data retained by worker across load/unload of the module * allocated on first call to pre-config hook; located on * subsequent calls to pre-config hook */ typedef struct worker_retained_data { ap_unixd_mpm_retained_data *mpm; int first_server_limit; int first_thread_limit; int sick_child_detected; int maxclients_reported; int near_maxclients_reported; /* * The max child slot ever assigned, preserved across restarts. Necessary * to deal with MaxRequestWorkers changes across AP_SIG_GRACEFUL restarts. * We use this value to optimize routines that have to scan the entire * scoreboard. */ int max_daemons_limit; /* * idle_spawn_rate is the number of children that will be spawned on the * next maintenance cycle if there aren't enough idle servers. It is * maintained per listeners bucket, doubled up to MAX_SPAWN_RATE, and * reset only when a cycle goes by without the need to spawn. */ int *idle_spawn_rate; #ifndef MAX_SPAWN_RATE #define MAX_SPAWN_RATE (32) #endif int hold_off_on_exponential_spawning; } worker_retained_data; static worker_retained_data *retained; typedef struct worker_child_bucket { ap_pod_t *pod; ap_listen_rec *listeners; apr_proc_mutex_t *mutex; } worker_child_bucket; static worker_child_bucket *all_buckets, /* All listeners buckets */ *my_bucket; /* Current child bucket */ #define MPM_CHILD_PID(i) (ap_scoreboard_image->parent[i].pid) /* The structure used to pass unique initialization info to each thread */ typedef struct { int pid; int tid; int sd; } proc_info; /* Structure used to pass information to the thread responsible for * creating the rest of the threads. */ typedef struct { apr_thread_t **threads; apr_thread_t *listener; int child_num_arg; apr_threadattr_t *threadattr; } thread_starter; #define ID_FROM_CHILD_THREAD(c, t) ((c * thread_limit) + t) /* The worker MPM respects a couple of runtime flags that can aid * in debugging. Setting the -DNO_DETACH flag will prevent the root process * from detaching from its controlling terminal. Additionally, setting * the -DONE_PROCESS flag (which implies -DNO_DETACH) will get you the * child_main loop running in the process which originally started up. * This gives you a pretty nice debugging environment. (You'll get a SIGHUP * early in standalone_main; just continue through. This is the server * trying to kill off any child processes which it might have lying * around --- Apache doesn't keep track of their pids, it just sends * SIGHUP to the process group, ignoring it in the root process. * Continue through and you'll be fine.). */ static int one_process = 0; #ifdef DEBUG_SIGSTOP int raise_sigstop_flags; #endif static apr_pool_t *pconf; /* Pool for config stuff */ static apr_pool_t *pchild; /* Pool for httpd child stuff */ static apr_pool_t *pruntime; /* Pool for MPM threads stuff */ static pid_t ap_my_pid; /* Linux getpid() doesn't work except in main thread. Use this instead */ static pid_t parent_pid; static apr_os_thread_t *listener_os_thread; #ifdef SINGLE_LISTEN_UNSERIALIZED_ACCEPT #define SAFE_ACCEPT(stmt) (ap_listeners->next ? (stmt) : APR_SUCCESS) #else #define SAFE_ACCEPT(stmt) (stmt) #endif /* The LISTENER_SIGNAL signal will be sent from the main thread to the * listener thread to wake it up for graceful termination (what a child * process from an old generation does when the admin does "apachectl * graceful"). This signal will be blocked in all threads of a child * process except for the listener thread. */ #define LISTENER_SIGNAL SIGHUP /* The WORKER_SIGNAL signal will be sent from the main thread to the * worker threads during an ungraceful restart or shutdown. * This ensures that on systems (i.e., Linux) where closing the worker * socket doesn't awake the worker thread when it is polling on the socket * (especially in apr_wait_for_io_or_timeout() when handling * Keep-Alive connections), close_worker_sockets() and join_workers() * still function in timely manner and allow ungraceful shutdowns to * proceed to completion. Otherwise join_workers() doesn't return * before the main process decides the child process is non-responsive * and sends a SIGKILL. */ #define WORKER_SIGNAL AP_SIG_GRACEFUL /* An array of socket descriptors in use by each thread used to * perform a non-graceful (forced) shutdown of the server. */ static apr_socket_t **worker_sockets; static void close_worker_sockets(void) { int i; for (i = 0; i < threads_per_child; i++) { if (worker_sockets[i]) { apr_socket_close(worker_sockets[i]); worker_sockets[i] = NULL; } } } static void wakeup_listener(void) { listener_may_exit = 1; if (!listener_os_thread) { /* XXX there is an obscure path that this doesn't handle perfectly: * right after listener thread is created but before * listener_os_thread is set, the first worker thread hits an * error and starts graceful termination */ return; } /* unblock the listener if it's waiting for a worker */ ap_queue_info_term(worker_queue_info); /* * we should just be able to "kill(ap_my_pid, LISTENER_SIGNAL)" on all * platforms and wake up the listener thread since it is the only thread * with SIGHUP unblocked, but that doesn't work on Linux */ #ifdef HAVE_PTHREAD_KILL pthread_kill(*listener_os_thread, LISTENER_SIGNAL); #else kill(ap_my_pid, LISTENER_SIGNAL); #endif } #define ST_INIT 0 #define ST_GRACEFUL 1 #define ST_UNGRACEFUL 2 static int terminate_mode = ST_INIT; static void signal_threads(int mode) { if (terminate_mode == mode) { return; } terminate_mode = mode; retained->mpm->mpm_state = AP_MPMQ_STOPPING; /* in case we weren't called from the listener thread, wake up the * listener thread */ wakeup_listener(); /* for ungraceful termination, let the workers exit now; * for graceful termination, the listener thread will notify the * workers to exit once it has stopped accepting new connections */ if (mode == ST_UNGRACEFUL) { workers_may_exit = 1; ap_queue_interrupt_all(worker_queue); close_worker_sockets(); /* forcefully kill all current connections */ } } static int worker_query(int query_code, int *result, apr_status_t *rv) { *rv = APR_SUCCESS; switch (query_code) { case AP_MPMQ_MAX_DAEMON_USED: *result = retained->max_daemons_limit; break; case AP_MPMQ_IS_THREADED: *result = AP_MPMQ_STATIC; break; case AP_MPMQ_IS_FORKED: *result = AP_MPMQ_DYNAMIC; break; case AP_MPMQ_HARD_LIMIT_DAEMONS: *result = server_limit; break; case AP_MPMQ_HARD_LIMIT_THREADS: *result = thread_limit; break; case AP_MPMQ_MAX_THREADS: *result = threads_per_child; break; case AP_MPMQ_MIN_SPARE_DAEMONS: *result = 0; break; case AP_MPMQ_MIN_SPARE_THREADS: *result = min_spare_threads; break; case AP_MPMQ_MAX_SPARE_DAEMONS: *result = 0; break; case AP_MPMQ_MAX_SPARE_THREADS: *result = max_spare_threads; break; case AP_MPMQ_MAX_REQUESTS_DAEMON: *result = ap_max_requests_per_child; break; case AP_MPMQ_MAX_DAEMONS: *result = ap_daemons_limit; break; case AP_MPMQ_MPM_STATE: *result = retained->mpm->mpm_state; break; case AP_MPMQ_GENERATION: *result = retained->mpm->my_generation; break; default: *rv = APR_ENOTIMPL; break; } return OK; } static void worker_note_child_killed(int childnum, pid_t pid, ap_generation_t gen) { if (childnum != -1) { /* child had a scoreboard slot? */ ap_run_child_status(ap_server_conf, ap_scoreboard_image->parent[childnum].pid, ap_scoreboard_image->parent[childnum].generation, childnum, MPM_CHILD_EXITED); ap_scoreboard_image->parent[childnum].pid = 0; } else { ap_run_child_status(ap_server_conf, pid, gen, -1, MPM_CHILD_EXITED); } } static void worker_note_child_started(int slot, pid_t pid) { ap_generation_t gen = retained->mpm->my_generation; ap_scoreboard_image->parent[slot].pid = pid; ap_scoreboard_image->parent[slot].generation = gen; ap_run_child_status(ap_server_conf, pid, gen, slot, MPM_CHILD_STARTED); } static void worker_note_child_lost_slot(int slot, pid_t newpid) { ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf, APLOGNO(00263) "pid %" APR_PID_T_FMT " taking over scoreboard slot from " "%" APR_PID_T_FMT "%s", newpid, ap_scoreboard_image->parent[slot].pid, ap_scoreboard_image->parent[slot].quiescing ? " (quiescing)" : ""); ap_run_child_status(ap_server_conf, ap_scoreboard_image->parent[slot].pid, ap_scoreboard_image->parent[slot].generation, slot, MPM_CHILD_LOST_SLOT); /* Don't forget about this exiting child process, or we * won't be able to kill it if it doesn't exit by the * time the server is shut down. */ ap_register_extra_mpm_process(ap_scoreboard_image->parent[slot].pid, ap_scoreboard_image->parent[slot].generation); } static const char *worker_get_name(void) { return "worker"; } /* a clean exit from a child with proper cleanup */ static void clean_child_exit(int code) __attribute__ ((noreturn)); static void clean_child_exit(int code) { retained->mpm->mpm_state = AP_MPMQ_STOPPING; if (pchild) { apr_pool_destroy(pchild); } if (one_process) { worker_note_child_killed(/* slot */ 0, 0, 0); } exit(code); } static void just_die(int sig) { clean_child_exit(0); } /***************************************************************** * Connection structures and accounting... */ static int child_fatal; /***************************************************************** * Here follows a long bunch of generic server bookkeeping stuff... */ /***************************************************************** * Child process main loop. */ static void process_socket(apr_thread_t *thd, apr_pool_t *p, apr_socket_t *sock, int my_child_num, int my_thread_num, apr_bucket_alloc_t *bucket_alloc) { conn_rec *current_conn; long conn_id = ID_FROM_CHILD_THREAD(my_child_num, my_thread_num); ap_sb_handle_t *sbh; ap_create_sb_handle(&sbh, p, my_child_num, my_thread_num); current_conn = ap_run_create_connection(p, ap_server_conf, sock, conn_id, sbh, bucket_alloc); if (current_conn) { current_conn->current_thread = thd; ap_process_connection(current_conn, sock); ap_lingering_close(current_conn); } } /* requests_this_child has gone to zero or below. See if the admin coded "MaxConnectionsPerChild 0", and keep going in that case. Doing it this way simplifies the hot path in worker_thread */ static void check_infinite_requests(void) { if (ap_max_requests_per_child) { signal_threads(ST_GRACEFUL); } else { requests_this_child = INT_MAX; /* keep going */ } } static void unblock_signal(int sig) { sigset_t sig_mask; sigemptyset(&sig_mask); sigaddset(&sig_mask, sig); #if defined(SIGPROCMASK_SETS_THREAD_MASK) sigprocmask(SIG_UNBLOCK, &sig_mask, NULL); #else pthread_sigmask(SIG_UNBLOCK, &sig_mask, NULL); #endif } static void dummy_signal_handler(int sig) { /* XXX If specifying SIG_IGN is guaranteed to unblock a syscall, * then we don't need this goofy function. */ } static void accept_mutex_error(const char *func, apr_status_t rv, int process_slot) { int level = APLOG_EMERG; if (ap_scoreboard_image->parent[process_slot].generation != ap_scoreboard_image->global->running_generation) { level = APLOG_DEBUG; /* common to get these at restart time */ } else if (requests_this_child == INT_MAX || ((requests_this_child == ap_max_requests_per_child) && ap_max_requests_per_child)) { ap_log_error(APLOG_MARK, level, rv, ap_server_conf, APLOGNO(00272) "apr_proc_mutex_%s failed " "before this child process served any requests.", func); clean_child_exit(APEXIT_CHILDSICK); } ap_log_error(APLOG_MARK, level, rv, ap_server_conf, APLOGNO(00273) "apr_proc_mutex_%s failed. Attempting to " "shutdown process gracefully.", func); signal_threads(ST_GRACEFUL); } static void * APR_THREAD_FUNC listener_thread(apr_thread_t *thd, void * dummy) { proc_info * ti = dummy; int process_slot = ti->pid; void *csd = NULL; apr_pool_t *ptrans = NULL; /* Pool for per-transaction stuff */ apr_status_t rv; ap_listen_rec *lr = NULL; int have_idle_worker = 0; int last_poll_idx = 0; free(ti); /* Unblock the signal used to wake this thread up, and set a handler for * it. */ unblock_signal(LISTENER_SIGNAL); apr_signal(LISTENER_SIGNAL, dummy_signal_handler); /* TODO: Switch to a system where threads reuse the results from earlier poll calls - manoj */ while (1) { /* TODO: requests_this_child should be synchronized - aaron */ if (requests_this_child <= 0) { check_infinite_requests(); } if (listener_may_exit) break; if (!have_idle_worker) { rv = ap_queue_info_wait_for_idler(worker_queue_info, NULL); if (APR_STATUS_IS_EOF(rv)) { break; /* we've been signaled to die now */ } else if (rv != APR_SUCCESS) { ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf, "apr_queue_info_wait failed. Attempting to " " shutdown process gracefully."); signal_threads(ST_GRACEFUL); break; } have_idle_worker = 1; } /* We've already decremented the idle worker count inside * ap_queue_info_wait_for_idler. */ if ((rv = SAFE_ACCEPT(apr_proc_mutex_lock(my_bucket->mutex))) != APR_SUCCESS) { if (!listener_may_exit) { accept_mutex_error("lock", rv, process_slot); } break; /* skip the lock release */ } if (!my_bucket->listeners->next) { /* Only one listener, so skip the poll */ lr = my_bucket->listeners; } else { while (!listener_may_exit) { apr_int32_t numdesc; const apr_pollfd_t *pdesc; rv = apr_pollset_poll(worker_pollset, -1, &numdesc, &pdesc); if (rv != APR_SUCCESS) { if (APR_STATUS_IS_EINTR(rv)) { continue; } /* apr_pollset_poll() will only return errors in catastrophic * circumstances. Let's try exiting gracefully, for now. */ ap_log_error(APLOG_MARK, APLOG_ERR, rv, ap_server_conf, APLOGNO(03137) "apr_pollset_poll: (listen)"); signal_threads(ST_GRACEFUL); } if (listener_may_exit) break; /* We can always use pdesc[0], but sockets at position N * could end up completely starved of attention in a very * busy server. Therefore, we round-robin across the * returned set of descriptors. While it is possible that * the returned set of descriptors might flip around and * continue to starve some sockets, we happen to know the * internal pollset implementation retains ordering * stability of the sockets. Thus, the round-robin should * ensure that a socket will eventually be serviced. */ if (last_poll_idx >= numdesc) last_poll_idx = 0; /* Grab a listener record from the client_data of the poll * descriptor, and advance our saved index to round-robin * the next fetch. * * ### hmm... this descriptor might have POLLERR rather * ### than POLLIN */ lr = pdesc[last_poll_idx++].client_data; break; } /* while */ } /* if/else */ if (!listener_may_exit) { /* the following pops a recycled ptrans pool off a stack */ ap_queue_info_pop_pool(worker_queue_info, &ptrans); if (ptrans == NULL) { /* we can't use a recycled transaction pool this time. * create a new transaction pool */ apr_allocator_t *allocator; apr_allocator_create(&allocator); apr_allocator_max_free_set(allocator, ap_max_mem_free); apr_pool_create_ex(&ptrans, pconf, NULL, allocator); apr_allocator_owner_set(allocator, ptrans); apr_pool_tag(ptrans, "transaction"); } rv = lr->accept_func(&csd, lr, ptrans); /* later we trash rv and rely on csd to indicate success/failure */ AP_DEBUG_ASSERT(rv == APR_SUCCESS || !csd); if (rv == APR_EGENERAL) { /* E[NM]FILE, ENOMEM, etc */ resource_shortage = 1; signal_threads(ST_GRACEFUL); } if ((rv = SAFE_ACCEPT(apr_proc_mutex_unlock(my_bucket->mutex))) != APR_SUCCESS) { if (listener_may_exit) { break; } accept_mutex_error("unlock", rv, process_slot); } if (csd != NULL) { rv = ap_queue_push_socket(worker_queue, csd, NULL, ptrans); if (rv) { /* trash the connection; we couldn't queue the connected * socket to a worker */ apr_socket_close(csd); ap_log_error(APLOG_MARK, APLOG_CRIT, rv, ap_server_conf, APLOGNO(03138) "ap_queue_push_socket failed"); } else { have_idle_worker = 0; } } } else { if ((rv = SAFE_ACCEPT(apr_proc_mutex_unlock(my_bucket->mutex))) != APR_SUCCESS) { int level = APLOG_EMERG; if (ap_scoreboard_image->parent[process_slot].generation != ap_scoreboard_image->global->running_generation) { level = APLOG_DEBUG; /* common to get these at restart time */ } ap_log_error(APLOG_MARK, level, rv, ap_server_conf, APLOGNO(00274) "apr_proc_mutex_unlock failed. Attempting to " "shutdown process gracefully."); signal_threads(ST_GRACEFUL); } break; } } ap_close_listeners_ex(my_bucket->listeners); ap_queue_info_free_idle_pools(worker_queue_info); ap_queue_term(worker_queue); dying = 1; ap_scoreboard_image->parent[process_slot].quiescing = 1; /* wake up the main thread */ kill(ap_my_pid, SIGTERM); apr_thread_exit(thd, APR_SUCCESS); return NULL; } /* XXX For ungraceful termination/restart, we definitely don't want to * wait for active connections to finish but we may want to wait * for idle workers to get out of the queue code and release mutexes, * since those mutexes are cleaned up pretty soon and some systems * may not react favorably (i.e., segfault) if operations are attempted * on cleaned-up mutexes. */ static void * APR_THREAD_FUNC worker_thread(apr_thread_t *thd, void * dummy) { proc_info * ti = dummy; int process_slot = ti->pid; int thread_slot = ti->tid; apr_socket_t *csd = NULL; apr_bucket_alloc_t *bucket_alloc; apr_pool_t *last_ptrans = NULL; apr_pool_t *ptrans; /* Pool for per-transaction stuff */ apr_status_t rv; int is_idle = 0; free(ti); ap_scoreboard_image->servers[process_slot][thread_slot].pid = ap_my_pid; ap_scoreboard_image->servers[process_slot][thread_slot].tid = apr_os_thread_current(); ap_scoreboard_image->servers[process_slot][thread_slot].generation = retained->mpm->my_generation; ap_update_child_status_from_indexes(process_slot, thread_slot, SERVER_STARTING, NULL); #ifdef HAVE_PTHREAD_KILL unblock_signal(WORKER_SIGNAL); apr_signal(WORKER_SIGNAL, dummy_signal_handler); #endif while (!workers_may_exit) { if (!is_idle) { rv = ap_queue_info_set_idle(worker_queue_info, last_ptrans); last_ptrans = NULL; if (rv != APR_SUCCESS) { ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf, "ap_queue_info_set_idle failed. Attempting to " "shutdown process gracefully."); signal_threads(ST_GRACEFUL); break; } is_idle = 1; } ap_update_child_status_from_indexes(process_slot, thread_slot, SERVER_READY, NULL); worker_pop: if (workers_may_exit) { break; } rv = ap_queue_pop_socket(worker_queue, &csd, &ptrans); if (rv != APR_SUCCESS) { /* We get APR_EOF during a graceful shutdown once all the connections * accepted by this server process have been handled. */ if (APR_STATUS_IS_EOF(rv)) { break; } /* We get APR_EINTR whenever ap_queue_pop_*() has been interrupted * from an explicit call to ap_queue_interrupt_all(). This allows * us to unblock threads stuck in ap_queue_pop_*() when a shutdown * is pending. * * If workers_may_exit is set and this is ungraceful termination/ * restart, we are bound to get an error on some systems (e.g., * AIX, which sanity-checks mutex operations) since the queue * may have already been cleaned up. Don't log the "error" if * workers_may_exit is set. */ else if (APR_STATUS_IS_EINTR(rv)) { goto worker_pop; } /* We got some other error. */ else if (!workers_may_exit) { ap_log_error(APLOG_MARK, APLOG_CRIT, rv, ap_server_conf, APLOGNO(03139) "ap_queue_pop_socket failed"); } continue; } is_idle = 0; worker_sockets[thread_slot] = csd; bucket_alloc = apr_bucket_alloc_create(ptrans); process_socket(thd, ptrans, csd, process_slot, thread_slot, bucket_alloc); worker_sockets[thread_slot] = NULL; requests_this_child--; apr_pool_clear(ptrans); last_ptrans = ptrans; } ap_update_child_status_from_indexes(process_slot, thread_slot, dying ? SERVER_DEAD : SERVER_GRACEFUL, NULL); apr_thread_exit(thd, APR_SUCCESS); return NULL; } static int check_signal(int signum) { switch (signum) { case SIGTERM: case SIGINT: return 1; } return 0; } static void create_listener_thread(thread_starter *ts) { int my_child_num = ts->child_num_arg; apr_threadattr_t *thread_attr = ts->threadattr; proc_info *my_info; apr_status_t rv; my_info = (proc_info *)ap_malloc(sizeof(proc_info)); my_info->pid = my_child_num; my_info->tid = -1; /* listener thread doesn't have a thread slot */ my_info->sd = 0; rv = apr_thread_create(&ts->listener, thread_attr, listener_thread, my_info, pruntime); if (rv != APR_SUCCESS) { ap_log_error(APLOG_MARK, APLOG_ALERT, rv, ap_server_conf, APLOGNO(00275) "apr_thread_create: unable to create listener thread"); /* let the parent decide how bad this really is */ clean_child_exit(APEXIT_CHILDSICK); } apr_os_thread_get(&listener_os_thread, ts->listener); } static void setup_threads_runtime(void) { ap_listen_rec *lr; apr_status_t rv; /* All threads (listener, workers) and synchronization objects (queues, * pollset, mutexes...) created here should have at least the lifetime of * the connections they handle (i.e. ptrans). We can't use this thread's * self pool because all these objects survive it, nor use pchild or pconf * directly because this starter thread races with other modules' runtime, * nor finally pchild (or subpool thereof) because it is killed explicitely * before pconf (thus connections/ptrans can live longer, which matters in * ONE_PROCESS mode). So this leaves us with a subpool of pconf, created * before any ptrans hence destroyed after. */ apr_pool_create(&pruntime, pconf); apr_pool_tag(pruntime, "mpm_runtime"); /* We must create the fd queues before we start up the listener * and worker threads. */ rv = ap_queue_create(&worker_queue, threads_per_child, pruntime); if (rv != APR_SUCCESS) { ap_log_error(APLOG_MARK, APLOG_ALERT, rv, ap_server_conf, APLOGNO(03140) "ap_queue_create() failed"); clean_child_exit(APEXIT_CHILDFATAL); } rv = ap_queue_info_create(&worker_queue_info, pruntime, threads_per_child, -1); if (rv != APR_SUCCESS) { ap_log_error(APLOG_MARK, APLOG_ALERT, rv, ap_server_conf, APLOGNO(03141) "ap_queue_info_create() failed"); clean_child_exit(APEXIT_CHILDFATAL); } /* Create the main pollset */ rv = apr_pollset_create(&worker_pollset, num_listensocks, pruntime, APR_POLLSET_NOCOPY); if (rv != APR_SUCCESS) { ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf, APLOGNO(03285) "Couldn't create pollset in thread;" " check system or user limits"); /* let the parent decide how bad this really is */ clean_child_exit(APEXIT_CHILDSICK); } for (lr = my_bucket->listeners; lr != NULL; lr = lr->next) { apr_pollfd_t *pfd = apr_pcalloc(pruntime, sizeof *pfd); pfd->desc_type = APR_POLL_SOCKET; pfd->desc.s = lr->sd; pfd->reqevents = APR_POLLIN; pfd->client_data = lr; rv = apr_pollset_add(worker_pollset, pfd); if (rv != APR_SUCCESS) { ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf, APLOGNO(03286) "Couldn't create add listener to pollset;" " check system or user limits"); /* let the parent decide how bad this really is */ clean_child_exit(APEXIT_CHILDSICK); } lr->accept_func = ap_unixd_accept; } worker_sockets = apr_pcalloc(pruntime, threads_per_child * sizeof(apr_socket_t *)); } /* XXX under some circumstances not understood, children can get stuck * in start_threads forever trying to take over slots which will * never be cleaned up; for now there is an APLOG_DEBUG message issued * every so often when this condition occurs */ static void * APR_THREAD_FUNC start_threads(apr_thread_t *thd, void *dummy) { thread_starter *ts = dummy; apr_thread_t **threads = ts->threads; apr_threadattr_t *thread_attr = ts->threadattr; int my_child_num = ts->child_num_arg; proc_info *my_info; apr_status_t rv; int threads_created = 0; int listener_started = 0; int prev_threads_created; int loops, i; loops = prev_threads_created = 0; while (1) { /* threads_per_child does not include the listener thread */ for (i = 0; i < threads_per_child; i++) { int status = ap_scoreboard_image->servers[my_child_num][i].status; if (status != SERVER_GRACEFUL && status != SERVER_DEAD) { continue; } my_info = (proc_info *)ap_malloc(sizeof(proc_info)); my_info->pid = my_child_num; my_info->tid = i; my_info->sd = 0; /* We are creating threads right now */ ap_update_child_status_from_indexes(my_child_num, i, SERVER_STARTING, NULL); /* We let each thread update its own scoreboard entry. This is * done because it lets us deal with tid better. */ rv = apr_thread_create(&threads[i], thread_attr, worker_thread, my_info, pruntime); if (rv != APR_SUCCESS) { ap_log_error(APLOG_MARK, APLOG_ALERT, rv, ap_server_conf, APLOGNO(03142) "apr_thread_create: unable to create worker thread"); /* let the parent decide how bad this really is */ clean_child_exit(APEXIT_CHILDSICK); } threads_created++; } /* Start the listener only when there are workers available */ if (!listener_started && threads_created) { create_listener_thread(ts); listener_started = 1; } if (start_thread_may_exit || threads_created == threads_per_child) { break; } /* wait for previous generation to clean up an entry */ apr_sleep(apr_time_from_sec(1)); ++loops; if (loops % 120 == 0) { /* every couple of minutes */ if (prev_threads_created == threads_created) { ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf, "child %" APR_PID_T_FMT " isn't taking over " "slots very quickly (%d of %d)", ap_my_pid, threads_created, threads_per_child); } prev_threads_created = threads_created; } } /* What state should this child_main process be listed as in the * scoreboard...? * ap_update_child_status_from_indexes(my_child_num, i, SERVER_STARTING, * (request_rec *) NULL); * * This state should be listed separately in the scoreboard, in some kind * of process_status, not mixed in with the worker threads' status. * "life_status" is almost right, but it's in the worker's structure, and * the name could be clearer. gla */ apr_thread_exit(thd, APR_SUCCESS); return NULL; } static void join_workers(apr_thread_t *listener, apr_thread_t **threads, int mode) { int i; apr_status_t rv, thread_rv; if (listener) { int iter; /* deal with a rare timing window which affects waking up the * listener thread... if the signal sent to the listener thread * is delivered between the time it verifies that the * listener_may_exit flag is clear and the time it enters a * blocking syscall, the signal didn't do any good... work around * that by sleeping briefly and sending it again */ iter = 0; while (iter < 10 && #ifdef HAVE_PTHREAD_KILL pthread_kill(*listener_os_thread, 0) #else kill(ap_my_pid, 0) #endif == 0) { /* listener not dead yet */ apr_sleep(apr_time_make(0, 500000)); wakeup_listener(); ++iter; } if (iter >= 10) { ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf, APLOGNO(00276) "the listener thread didn't exit"); } else { rv = apr_thread_join(&thread_rv, listener); if (rv != APR_SUCCESS) { ap_log_error(APLOG_MARK, APLOG_CRIT, rv, ap_server_conf, APLOGNO(00277) "apr_thread_join: unable to join listener thread"); } } } for (i = 0; i < threads_per_child; i++) { if (threads[i]) { /* if we ever created this thread */ if (mode != ST_GRACEFUL) { #ifdef HAVE_PTHREAD_KILL apr_os_thread_t *worker_os_thread; apr_os_thread_get(&worker_os_thread, threads[i]); pthread_kill(*worker_os_thread, WORKER_SIGNAL); #endif } rv = apr_thread_join(&thread_rv, threads[i]); if (rv != APR_SUCCESS) { ap_log_error(APLOG_MARK, APLOG_CRIT, rv, ap_server_conf, APLOGNO(00278) "apr_thread_join: unable to join worker " "thread %d", i); } } } } static void join_start_thread(apr_thread_t *start_thread_id) { apr_status_t rv, thread_rv; start_thread_may_exit = 1; /* tell it to give up in case it is still * trying to take over slots from a * previous generation */ rv = apr_thread_join(&thread_rv, start_thread_id); if (rv != APR_SUCCESS) { ap_log_error(APLOG_MARK, APLOG_CRIT, rv, ap_server_conf, APLOGNO(00279) "apr_thread_join: unable to join the start " "thread"); } } static void child_main(int child_num_arg, int child_bucket) { apr_thread_t **threads; apr_status_t rv; thread_starter *ts; apr_threadattr_t *thread_attr; apr_thread_t *start_thread_id; int i; /* for benefit of any hooks that run as this child initializes */ retained->mpm->mpm_state = AP_MPMQ_STARTING; ap_my_pid = getpid(); ap_fatal_signal_child_setup(ap_server_conf); /* Get a sub context for global allocations in this child, so that * we can have cleanups occur when the child exits. */ apr_pool_create(&pchild, pconf); apr_pool_tag(pchild, "pchild"); /* close unused listeners and pods */ for (i = 0; i < retained->mpm->num_buckets; i++) { if (i != child_bucket) { ap_close_listeners_ex(all_buckets[i].listeners); ap_mpm_podx_close(all_buckets[i].pod); } } /*stuff to do before we switch id's, so we have permissions.*/ ap_reopen_scoreboard(pchild, NULL, 0); rv = SAFE_ACCEPT(apr_proc_mutex_child_init(&my_bucket->mutex, apr_proc_mutex_lockfile(my_bucket->mutex), pchild)); if (rv != APR_SUCCESS) { ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf, APLOGNO(00280) "Couldn't initialize cross-process lock in child"); clean_child_exit(APEXIT_CHILDFATAL); } /* done with init critical section */ if (ap_run_drop_privileges(pchild, ap_server_conf)) { clean_child_exit(APEXIT_CHILDFATAL); } /* Just use the standard apr_setup_signal_thread to block all signals * from being received. The child processes no longer use signals for * any communication with the parent process. Let's also do this before * child_init() hooks are called and possibly create threads that * otherwise could "steal" (implicitely) MPM's signals. */ rv = apr_setup_signal_thread(); if (rv != APR_SUCCESS) { ap_log_error(APLOG_MARK, APLOG_EMERG, rv, ap_server_conf, APLOGNO(00281) "Couldn't initialize signal thread"); clean_child_exit(APEXIT_CHILDFATAL); } ap_run_child_init(pchild, ap_server_conf); if (ap_max_requests_per_child) { requests_this_child = ap_max_requests_per_child; } else { /* coding a value of zero means infinity */ requests_this_child = INT_MAX; } /* Setup threads */ /* Globals used by signal_threads() so to be initialized before */ setup_threads_runtime(); /* clear the storage; we may not create all our threads immediately, * and we want a 0 entry to indicate a thread which was not created */ threads = (apr_thread_t **)ap_calloc(1, sizeof(apr_thread_t *) * threads_per_child); ts = (thread_starter *)apr_palloc(pchild, sizeof(*ts)); apr_threadattr_create(&thread_attr, pchild); /* 0 means PTHREAD_CREATE_JOINABLE */ apr_threadattr_detach_set(thread_attr, 0); if (ap_thread_stacksize != 0) { rv = apr_threadattr_stacksize_set(thread_attr, ap_thread_stacksize); if (rv != APR_SUCCESS && rv != APR_ENOTIMPL) { ap_log_error(APLOG_MARK, APLOG_WARNING, rv, ap_server_conf, APLOGNO(02435) "WARNING: ThreadStackSize of %" APR_SIZE_T_FMT " is " "inappropriate, using default", ap_thread_stacksize); } } ts->threads = threads; ts->listener = NULL; ts->child_num_arg = child_num_arg; ts->threadattr = thread_attr; rv = apr_thread_create(&start_thread_id, thread_attr, start_threads, ts, pchild); if (rv != APR_SUCCESS) { ap_log_error(APLOG_MARK, APLOG_ALERT, rv, ap_server_conf, APLOGNO(00282) "apr_thread_create: unable to create worker thread"); /* let the parent decide how bad this really is */ clean_child_exit(APEXIT_CHILDSICK); } retained->mpm->mpm_state = AP_MPMQ_RUNNING; /* If we are only running in one_process mode, we will want to * still handle signals. */ if (one_process) { /* Block until we get a terminating signal. */ apr_signal_thread(check_signal); /* make sure the start thread has finished; signal_threads() * and join_workers() depend on that */ /* XXX join_start_thread() won't be awakened if one of our * threads encounters a critical error and attempts to * shutdown this child */ join_start_thread(start_thread_id); signal_threads(ST_UNGRACEFUL); /* helps us terminate a little more * quickly than the dispatch of the signal thread * beats the Pipe of Death and the browsers */ /* A terminating signal was received. Now join each of the * workers to clean them up. * If the worker already exited, then the join frees * their resources and returns. * If the worker hasn't exited, then this blocks until * they have (then cleans up). */ join_workers(ts->listener, threads, ST_UNGRACEFUL); } else { /* !one_process */ /* remove SIGTERM from the set of blocked signals... if one of * the other threads in the process needs to take us down * (e.g., for MaxConnectionsPerChild) it will send us SIGTERM */ unblock_signal(SIGTERM); apr_signal(SIGTERM, dummy_signal_handler); /* Watch for any messages from the parent over the POD */ while (1) { rv = ap_mpm_podx_check(my_bucket->pod); if (rv == AP_MPM_PODX_NORESTART) { /* see if termination was triggered while we slept */ switch(terminate_mode) { case ST_GRACEFUL: rv = AP_MPM_PODX_GRACEFUL; break; case ST_UNGRACEFUL: rv = AP_MPM_PODX_RESTART; break; } } if (rv == AP_MPM_PODX_GRACEFUL || rv == AP_MPM_PODX_RESTART) { /* make sure the start thread has finished; * signal_threads() and join_workers depend on that */ join_start_thread(start_thread_id); signal_threads(rv == AP_MPM_PODX_GRACEFUL ? ST_GRACEFUL : ST_UNGRACEFUL); break; } } /* A terminating signal was received. Now join each of the * workers to clean them up. * If the worker already exited, then the join frees * their resources and returns. * If the worker hasn't exited, then this blocks until * they have (then cleans up). */ join_workers(ts->listener, threads, rv == AP_MPM_PODX_GRACEFUL ? ST_GRACEFUL : ST_UNGRACEFUL); } free(threads); clean_child_exit(resource_shortage ? APEXIT_CHILDSICK : 0); } static int make_child(server_rec *s, int slot, int bucket) { int pid; if (slot + 1 > retained->max_daemons_limit) { retained->max_daemons_limit = slot + 1; } if (one_process) { my_bucket = &all_buckets[0]; worker_note_child_started(slot, getpid()); child_main(slot, 0); /* NOTREACHED */ ap_assert(0); return -1; } if ((pid = fork()) == -1) { ap_log_error(APLOG_MARK, APLOG_ERR, errno, s, APLOGNO(00283) "fork: Unable to fork new process"); /* fork didn't succeed. There's no need to touch the scoreboard; * if we were trying to replace a failed child process, then * server_main_loop() marked its workers SERVER_DEAD, and if * we were trying to replace a child process that exited normally, * its worker_thread()s left SERVER_DEAD or SERVER_GRACEFUL behind. */ /* In case system resources are maxxed out, we don't want Apache running away with the CPU trying to fork over and over and over again. */ apr_sleep(apr_time_from_sec(10)); return -1; } if (!pid) { my_bucket = &all_buckets[bucket]; #ifdef HAVE_BINDPROCESSOR /* By default, AIX binds to a single processor. This bit unbinds * children which will then bind to another CPU. */ int status = bindprocessor(BINDPROCESS, (int)getpid(), PROCESSOR_CLASS_ANY); if (status != OK) ap_log_error(APLOG_MARK, APLOG_DEBUG, errno, ap_server_conf, APLOGNO(00284) "processor unbind failed"); #endif RAISE_SIGSTOP(MAKE_CHILD); apr_signal(SIGTERM, just_die); child_main(slot, bucket); /* NOTREACHED */ ap_assert(0); return -1; } if (ap_scoreboard_image->parent[slot].pid != 0) { /* This new child process is squatting on the scoreboard * entry owned by an exiting child process, which cannot * exit until all active requests complete. */ worker_note_child_lost_slot(slot, pid); } ap_scoreboard_image->parent[slot].quiescing = 0; ap_scoreboard_image->parent[slot].bucket = bucket; worker_note_child_started(slot, pid); return 0; } /* start up a bunch of children */ static void startup_children(int number_to_start) { int i; for (i = 0; number_to_start && i < ap_daemons_limit; ++i) { if (ap_scoreboard_image->parent[i].pid != 0) { continue; } if (make_child(ap_server_conf, i, i % retained->mpm->num_buckets) < 0) { break; } --number_to_start; } } static void perform_idle_server_maintenance(int child_bucket, int num_buckets) { int i, j; int idle_thread_count; worker_score *ws; process_score *ps; int free_length; int totally_free_length = 0; int free_slots[MAX_SPAWN_RATE]; int last_non_dead; int total_non_dead; int active_thread_count = 0; /* initialize the free_list */ free_length = 0; idle_thread_count = 0; last_non_dead = -1; total_non_dead = 0; for (i = 0; i < ap_daemons_limit; ++i) { /* Initialization to satisfy the compiler. It doesn't know * that threads_per_child is always > 0 */ int status = SERVER_DEAD; int any_dying_threads = 0; int any_dead_threads = 0; int all_dead_threads = 1; int child_threads_active = 0; if (i >= retained->max_daemons_limit && totally_free_length == retained->idle_spawn_rate[child_bucket]) { /* short cut if all active processes have been examined and * enough empty scoreboard slots have been found */ break; } ps = &ap_scoreboard_image->parent[i]; for (j = 0; j < threads_per_child; j++) { ws = &ap_scoreboard_image->servers[i][j]; status = ws->status; /* XXX any_dying_threads is probably no longer needed GLA */ any_dying_threads = any_dying_threads || (status == SERVER_GRACEFUL); any_dead_threads = any_dead_threads || (status == SERVER_DEAD); all_dead_threads = all_dead_threads && (status == SERVER_DEAD || status == SERVER_GRACEFUL); /* We consider a starting server as idle because we started it * at least a cycle ago, and if it still hasn't finished starting * then we're just going to swamp things worse by forking more. * So we hopefully won't need to fork more if we count it. * This depends on the ordering of SERVER_READY and SERVER_STARTING. */ if (ps->pid != 0) { /* XXX just set all_dead_threads in outer for loop if no pid? not much else matters */ if (status <= SERVER_READY && !ps->quiescing && ps->generation == retained->mpm->my_generation && ps->bucket == child_bucket) { ++idle_thread_count; } if (status >= SERVER_READY && status < SERVER_GRACEFUL) { ++child_threads_active; } } } active_thread_count += child_threads_active; if (any_dead_threads && totally_free_length < retained->idle_spawn_rate[child_bucket] && free_length < MAX_SPAWN_RATE / num_buckets && (!ps->pid /* no process in the slot */ || ps->quiescing)) { /* or at least one is going away */ if (all_dead_threads) { /* great! we prefer these, because the new process can * start more threads sooner. So prioritize this slot * by putting it ahead of any slots with active threads. * * first, make room by moving a slot that's potentially still * in use to the end of the array */ free_slots[free_length] = free_slots[totally_free_length]; free_slots[totally_free_length++] = i; } else { /* slot is still in use - back of the bus */ free_slots[free_length] = i; } ++free_length; } else if (child_threads_active == threads_per_child) { had_healthy_child = 1; } /* XXX if (!ps->quiescing) is probably more reliable GLA */ if (!any_dying_threads) { last_non_dead = i; ++total_non_dead; } } if (retained->sick_child_detected) { if (had_healthy_child) { /* Assume this is a transient error, even though it may not be. Leave * the server up in case it is able to serve some requests or the * problem will be resolved. */ retained->sick_child_detected = 0; } else { /* looks like a basket case, as no child ever fully initialized; give up. */ retained->mpm->shutdown_pending = 1; child_fatal = 1; ap_log_error(APLOG_MARK, APLOG_ALERT, 0, ap_server_conf, APLOGNO(02325) "A resource shortage or other unrecoverable failure " "was encountered before any child process initialized " "successfully... httpd is exiting!"); /* the child already logged the failure details */ return; } } retained->max_daemons_limit = last_non_dead + 1; if (idle_thread_count > max_spare_threads / num_buckets) { /* Kill off one child */ ap_mpm_podx_signal(all_buckets[child_bucket].pod, AP_MPM_PODX_GRACEFUL); retained->idle_spawn_rate[child_bucket] = 1; } else if (idle_thread_count < min_spare_threads / num_buckets) { /* terminate the free list */ if (free_length == 0) { /* scoreboard is full, can't fork */ if (active_thread_count >= ap_daemons_limit * threads_per_child) { /* no threads are "inactive" - starting, stopping, etc. */ /* have we reached MaxRequestWorkers, or just getting close? */ if (0 == idle_thread_count) { if (!retained->maxclients_reported) { /* only report this condition once */ ap_log_error(APLOG_MARK, APLOG_ERR, 0, ap_server_conf, APLOGNO(00286) "server reached MaxRequestWorkers " "setting, consider raising the " "MaxRequestWorkers setting"); retained->maxclients_reported = 1; } } else { if (!retained->near_maxclients_reported) { ap_log_error(APLOG_MARK, APLOG_ERR, 0, ap_server_conf, APLOGNO(00287) "server is within MinSpareThreads of " "MaxRequestWorkers, consider raising the " "MaxRequestWorkers setting"); retained->near_maxclients_reported = 1; } } } else { ap_log_error(APLOG_MARK, APLOG_ERR, 0, ap_server_conf, APLOGNO(00288) "scoreboard is full, not at MaxRequestWorkers"); } retained->idle_spawn_rate[child_bucket] = 1; } else { if (free_length > retained->idle_spawn_rate[child_bucket]) { free_length = retained->idle_spawn_rate[child_bucket]; } if (retained->idle_spawn_rate[child_bucket] >= 8) { ap_log_error(APLOG_MARK, APLOG_INFO, 0, ap_server_conf, APLOGNO(00289) "server seems busy, (you may need " "to increase StartServers, ThreadsPerChild " "or Min/MaxSpareThreads), " "spawning %d children, there are around %d idle " "threads, and %d total children", free_length, idle_thread_count, total_non_dead); } for (i = 0; i < free_length; ++i) { make_child(ap_server_conf, free_slots[i], child_bucket); } /* the next time around we want to spawn twice as many if this * wasn't good enough, but not if we've just done a graceful */ if (retained->hold_off_on_exponential_spawning) { --retained->hold_off_on_exponential_spawning; } else if (retained->idle_spawn_rate[child_bucket] < MAX_SPAWN_RATE / num_buckets) { retained->idle_spawn_rate[child_bucket] *= 2; } } } else { retained->idle_spawn_rate[child_bucket] = 1; } } static void server_main_loop(int remaining_children_to_start, int num_buckets) { ap_generation_t old_gen; int child_slot; apr_exit_why_e exitwhy; int status, processed_status; apr_proc_t pid; int i; while (!retained->mpm->restart_pending && !retained->mpm->shutdown_pending) { ap_wait_or_timeout(&exitwhy, &status, &pid, pconf, ap_server_conf); if (pid.pid != -1) { processed_status = ap_process_child_status(&pid, exitwhy, status); child_slot = ap_find_child_by_pid(&pid); if (processed_status == APEXIT_CHILDFATAL) { /* fix race condition found in PR 39311 * A child created at the same time as a graceful happens * can find the lock missing and create a fatal error. * It is not fatal for the last generation to be in this state. */ if (child_slot < 0 || ap_get_scoreboard_process(child_slot)->generation == retained->mpm->my_generation) { retained->mpm->shutdown_pending = 1; child_fatal = 1; return; } else { ap_log_error(APLOG_MARK, APLOG_WARNING, 0, ap_server_conf, APLOGNO(00290) "Ignoring fatal error in child of previous " "generation (pid %ld).", (long)pid.pid); retained->sick_child_detected = 1; } } else if (processed_status == APEXIT_CHILDSICK) { /* tell perform_idle_server_maintenance to check into this * on the next timer pop */ retained->sick_child_detected = 1; } /* non-fatal death... note that it's gone in the scoreboard. */ if (child_slot >= 0) { process_score *ps; for (i = 0; i < threads_per_child; i++) ap_update_child_status_from_indexes(child_slot, i, SERVER_DEAD, NULL); worker_note_child_killed(child_slot, 0, 0); ps = &ap_scoreboard_image->parent[child_slot]; ps->quiescing = 0; if (processed_status == APEXIT_CHILDSICK) { /* resource shortage, minimize the fork rate */ retained->idle_spawn_rate[ps->bucket] = 1; } else if (remaining_children_to_start && child_slot < ap_daemons_limit) { /* we're still doing a 1-for-1 replacement of dead * children with new children */ make_child(ap_server_conf, child_slot, ps->bucket); --remaining_children_to_start; } } else if (ap_unregister_extra_mpm_process(pid.pid, &old_gen) == 1) { worker_note_child_killed(-1, /* already out of the scoreboard */ pid.pid, old_gen); if (processed_status == APEXIT_CHILDSICK && old_gen == retained->mpm->my_generation) { /* resource shortage, minimize the fork rate */ for (i = 0; i < num_buckets; i++) { retained->idle_spawn_rate[i] = 1; } } #if APR_HAS_OTHER_CHILD } else if (apr_proc_other_child_alert(&pid, APR_OC_REASON_DEATH, status) == 0) { /* handled */ #endif } else if (retained->mpm->was_graceful) { /* Great, we've probably just lost a slot in the * scoreboard. Somehow we don't know about this child. */ ap_log_error(APLOG_MARK, APLOG_WARNING, 0, ap_server_conf, APLOGNO(00291) "long lost child came home! (pid %ld)", (long)pid.pid); } /* Don't perform idle maintenance when a child dies, * only do it when there's a timeout. Remember only a * finite number of children can die, and it's pretty * pathological for a lot to die suddenly. */ continue; } else if (remaining_children_to_start) { /* we hit a 1 second timeout in which none of the previous * generation of children needed to be reaped... so assume * they're all done, and pick up the slack if any is left. */ startup_children(remaining_children_to_start); remaining_children_to_start = 0; /* In any event we really shouldn't do the code below because * few of the servers we just started are in the IDLE state * yet, so we'd mistakenly create an extra server. */ continue; } for (i = 0; i < num_buckets; i++) { perform_idle_server_maintenance(i, num_buckets); } } } static int worker_run(apr_pool_t *_pconf, apr_pool_t *plog, server_rec *s) { int num_buckets = retained->mpm->num_buckets; int remaining_children_to_start; int i; ap_log_pid(pconf, ap_pid_fname); if (!retained->mpm->was_graceful) { if (ap_run_pre_mpm(s->process->pool, SB_SHARED) != OK) { retained->mpm->mpm_state = AP_MPMQ_STOPPING; return !OK; } /* fix the generation number in the global score; we just got a new, * cleared scoreboard */ ap_scoreboard_image->global->running_generation = retained->mpm->my_generation; } ap_unixd_mpm_set_signals(pconf, one_process); /* Don't thrash since num_buckets depends on the * system and the number of online CPU cores... */ if (ap_daemons_limit < num_buckets) ap_daemons_limit = num_buckets; if (ap_daemons_to_start < num_buckets) ap_daemons_to_start = num_buckets; /* We want to create as much children at a time as the number of buckets, * so to optimally accept connections (evenly distributed across buckets). * Thus min_spare_threads should at least maintain num_buckets children, * and max_spare_threads allow num_buckets more children w/o triggering * immediately (e.g. num_buckets idle threads margin, one per bucket). */ if (min_spare_threads < threads_per_child * (num_buckets - 1) + num_buckets) min_spare_threads = threads_per_child * (num_buckets - 1) + num_buckets; if (max_spare_threads < min_spare_threads + (threads_per_child + 1) * num_buckets) max_spare_threads = min_spare_threads + (threads_per_child + 1) * num_buckets; /* If we're doing a graceful_restart then we're going to see a lot * of children exiting immediately when we get into the main loop * below (because we just sent them AP_SIG_GRACEFUL). This happens pretty * rapidly... and for each one that exits we may start a new one, until * there are at least min_spare_threads idle threads, counting across * all children. But we may be permitted to start more children than * that, so we'll just keep track of how many we're * supposed to start up without the 1 second penalty between each fork. */ remaining_children_to_start = ap_daemons_to_start; if (remaining_children_to_start > ap_daemons_limit) { remaining_children_to_start = ap_daemons_limit; } if (!retained->mpm->was_graceful) { startup_children(remaining_children_to_start); remaining_children_to_start = 0; } else { /* give the system some time to recover before kicking into * exponential mode */ retained->hold_off_on_exponential_spawning = 10; } ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf, APLOGNO(00292) "%s configured -- resuming normal operations", ap_get_server_description()); ap_log_error(APLOG_MARK, APLOG_INFO, 0, ap_server_conf, APLOGNO(00293) "Server built: %s", ap_get_server_built()); ap_log_command_line(plog, s); ap_log_mpm_common(s); ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, ap_server_conf, APLOGNO(00294) "Accept mutex: %s (default: %s)", (all_buckets[0].mutex) ? apr_proc_mutex_name(all_buckets[0].mutex) : "none", apr_proc_mutex_defname()); retained->mpm->mpm_state = AP_MPMQ_RUNNING; server_main_loop(remaining_children_to_start, num_buckets); retained->mpm->mpm_state = AP_MPMQ_STOPPING; if (retained->mpm->shutdown_pending && retained->mpm->is_ungraceful) { /* Time to shut down: * Kill child processes, tell them to call child_exit, etc... */ for (i = 0; i < num_buckets; i++) { ap_mpm_podx_killpg(all_buckets[i].pod, ap_daemons_limit, AP_MPM_PODX_RESTART); } ap_reclaim_child_processes(1, /* Start with SIGTERM */ worker_note_child_killed); if (!child_fatal) { /* cleanup pid file on normal shutdown */ ap_remove_pid(pconf, ap_pid_fname); ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf, APLOGNO(00295) "caught SIGTERM, shutting down"); } return DONE; } if (retained->mpm->shutdown_pending) { /* Time to gracefully shut down: * Kill child processes, tell them to call child_exit, etc... */ int active_children; int index; apr_time_t cutoff = 0; /* Close our listeners, and then ask our children to do same */ ap_close_listeners(); for (i = 0; i < num_buckets; i++) { ap_mpm_podx_killpg(all_buckets[i].pod, ap_daemons_limit, AP_MPM_PODX_GRACEFUL); } ap_relieve_child_processes(worker_note_child_killed); if (!child_fatal) { /* cleanup pid file on normal shutdown */ ap_remove_pid(pconf, ap_pid_fname); ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf, APLOGNO(00296) "caught " AP_SIG_GRACEFUL_STOP_STRING ", shutting down gracefully"); } if (ap_graceful_shutdown_timeout) { cutoff = apr_time_now() + apr_time_from_sec(ap_graceful_shutdown_timeout); } /* Don't really exit until each child has finished */ retained->mpm->shutdown_pending = 0; do { /* Pause for a second */ apr_sleep(apr_time_from_sec(1)); /* Relieve any children which have now exited */ ap_relieve_child_processes(worker_note_child_killed); active_children = 0; for (index = 0; index < ap_daemons_limit; ++index) { if (ap_mpm_safe_kill(MPM_CHILD_PID(index), 0) == APR_SUCCESS) { active_children = 1; /* Having just one child is enough to stay around */ break; } } } while (!retained->mpm->shutdown_pending && active_children && (!ap_graceful_shutdown_timeout || apr_time_now() < cutoff)); /* We might be here because we received SIGTERM, either * way, try and make sure that all of our processes are * really dead. */ for (i = 0; i < num_buckets; i++) { ap_mpm_podx_killpg(all_buckets[i].pod, ap_daemons_limit, AP_MPM_PODX_RESTART); } ap_reclaim_child_processes(1, worker_note_child_killed); return DONE; } /* we've been told to restart */ if (one_process) { /* not worth thinking about */ return DONE; } /* advance to the next generation */ /* XXX: we really need to make sure this new generation number isn't in * use by any of the children. */ ++retained->mpm->my_generation; ap_scoreboard_image->global->running_generation = retained->mpm->my_generation; if (!retained->mpm->is_ungraceful) { ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf, APLOGNO(00297) AP_SIG_GRACEFUL_STRING " received. Doing graceful restart"); /* wake up the children...time to die. But we'll have more soon */ for (i = 0; i < num_buckets; i++) { ap_mpm_podx_killpg(all_buckets[i].pod, ap_daemons_limit, AP_MPM_PODX_GRACEFUL); } /* This is mostly for debugging... so that we know what is still * gracefully dealing with existing request. */ } else { /* Kill 'em all. Since the child acts the same on the parents SIGTERM * and a SIGHUP, we may as well use the same signal, because some user * pthreads are stealing signals from us left and right. */ for (i = 0; i < num_buckets; i++) { ap_mpm_podx_killpg(all_buckets[i].pod, ap_daemons_limit, AP_MPM_PODX_RESTART); } ap_reclaim_child_processes(1, /* Start with SIGTERM */ worker_note_child_killed); ap_log_error(APLOG_MARK, APLOG_NOTICE, 0, ap_server_conf, APLOGNO(00298) "SIGHUP received. Attempting to restart"); } return OK; } /* This really should be a post_config hook, but the error log is already * redirected by that point, so we need to do this in the open_logs phase. */ static int worker_open_logs(apr_pool_t *p, apr_pool_t *plog, apr_pool_t *ptemp, server_rec *s) { int startup = 0; int level_flags = 0; int num_buckets = 0; ap_listen_rec **listen_buckets; apr_status_t rv; char id[16]; int i; pconf = p; /* the reverse of pre_config, we want this only the first time around */ if (retained->mpm->module_loads == 1) { startup = 1; level_flags |= APLOG_STARTUP; } if ((num_listensocks = ap_setup_listeners(ap_server_conf)) < 1) { ap_log_error(APLOG_MARK, APLOG_ALERT | level_flags, 0, (startup ? NULL : s), "no listening sockets available, shutting down"); return !OK; } if (one_process) { num_buckets = 1; } else if (retained->mpm->was_graceful) { /* Preserve the number of buckets on graceful restarts. */ num_buckets = retained->mpm->num_buckets; } if ((rv = ap_duplicate_listeners(pconf, ap_server_conf, &listen_buckets, &num_buckets))) { ap_log_error(APLOG_MARK, APLOG_CRIT | level_flags, rv, (startup ? NULL : s), "could not duplicate listeners"); return !OK; } all_buckets = apr_pcalloc(pconf, num_buckets * sizeof(*all_buckets)); for (i = 0; i < num_buckets; i++) { if (!one_process && /* no POD in one_process mode */ (rv = ap_mpm_podx_open(pconf, &all_buckets[i].pod))) { ap_log_error(APLOG_MARK, APLOG_CRIT | level_flags, rv, (startup ? NULL : s), "could not open pipe-of-death"); return !OK; } /* Initialize cross-process accept lock (safe accept needed only) */ if ((rv = SAFE_ACCEPT((apr_snprintf(id, sizeof id, "%i", i), ap_proc_mutex_create(&all_buckets[i].mutex, NULL, AP_ACCEPT_MUTEX_TYPE, id, s, pconf, 0))))) { ap_log_error(APLOG_MARK, APLOG_CRIT | level_flags, rv, (startup ? NULL : s), "could not create accept mutex"); return !OK; } all_buckets[i].listeners = listen_buckets[i]; } if (retained->mpm->max_buckets < num_buckets) { int new_max, *new_ptr; new_max = retained->mpm->max_buckets * 2; if (new_max < num_buckets) { new_max = num_buckets; } new_ptr = (int *)apr_palloc(ap_pglobal, new_max * sizeof(int)); memcpy(new_ptr, retained->idle_spawn_rate, retained->mpm->num_buckets * sizeof(int)); retained->idle_spawn_rate = new_ptr; retained->mpm->max_buckets = new_max; } if (retained->mpm->num_buckets < num_buckets) { int rate_max = 1; /* If new buckets are added, set their idle spawn rate to * the highest so far, so that they get filled as quickly * as the existing ones. */ for (i = 0; i < retained->mpm->num_buckets; i++) { if (rate_max < retained->idle_spawn_rate[i]) { rate_max = retained->idle_spawn_rate[i]; } } for (/* up to date i */; i < num_buckets; i++) { retained->idle_spawn_rate[i] = rate_max; } } retained->mpm->num_buckets = num_buckets; return OK; } static int worker_pre_config(apr_pool_t *pconf, apr_pool_t *plog, apr_pool_t *ptemp) { int no_detach, debug, foreground; apr_status_t rv; const char *userdata_key = "mpm_worker_module"; debug = ap_exists_config_define("DEBUG"); if (debug) { foreground = one_process = 1; no_detach = 0; } else { one_process = ap_exists_config_define("ONE_PROCESS"); no_detach = ap_exists_config_define("NO_DETACH"); foreground = ap_exists_config_define("FOREGROUND"); } ap_mutex_register(pconf, AP_ACCEPT_MUTEX_TYPE, NULL, APR_LOCK_DEFAULT, 0); retained = ap_retained_data_get(userdata_key); if (!retained) { retained = ap_retained_data_create(userdata_key, sizeof(*retained)); retained->mpm = ap_unixd_mpm_get_retained_data(); retained->max_daemons_limit = -1; } retained->mpm->mpm_state = AP_MPMQ_STARTING; if (retained->mpm->baton != retained) { retained->mpm->was_graceful = 0; retained->mpm->baton = retained; } ++retained->mpm->module_loads; /* sigh, want this only the second time around */ if (retained->mpm->module_loads == 2) { if (!one_process && !foreground) { /* before we detach, setup crash handlers to log to errorlog */ ap_fatal_signal_setup(ap_server_conf, pconf); rv = apr_proc_detach(no_detach ? APR_PROC_DETACH_FOREGROUND : APR_PROC_DETACH_DAEMONIZE); if (rv != APR_SUCCESS) { ap_log_error(APLOG_MARK, APLOG_CRIT, rv, NULL, APLOGNO(00299) "apr_proc_detach failed"); return HTTP_INTERNAL_SERVER_ERROR; } } } parent_pid = ap_my_pid = getpid(); ap_listen_pre_config(); ap_daemons_to_start = DEFAULT_START_DAEMON; min_spare_threads = DEFAULT_MIN_FREE_DAEMON * DEFAULT_THREADS_PER_CHILD; max_spare_threads = DEFAULT_MAX_FREE_DAEMON * DEFAULT_THREADS_PER_CHILD; server_limit = DEFAULT_SERVER_LIMIT; thread_limit = DEFAULT_THREAD_LIMIT; ap_daemons_limit = server_limit; threads_per_child = DEFAULT_THREADS_PER_CHILD; max_workers = ap_daemons_limit * threads_per_child; had_healthy_child = 0; ap_extended_status = 0; return OK; } static int worker_check_config(apr_pool_t *p, apr_pool_t *plog, apr_pool_t *ptemp, server_rec *s) { int startup = 0; /* the reverse of pre_config, we want this only the first time around */ if (retained->mpm->module_loads == 1) { startup = 1; } if (server_limit > MAX_SERVER_LIMIT) { if (startup) { ap_log_error(APLOG_MARK, APLOG_WARNING | APLOG_STARTUP, 0, NULL, APLOGNO(00300) "WARNING: ServerLimit of %d exceeds compile-time " "limit of %d servers, decreasing to %d.", server_limit, MAX_SERVER_LIMIT, MAX_SERVER_LIMIT); } else { ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s, APLOGNO(00301) "ServerLimit of %d exceeds compile-time limit " "of %d, decreasing to match", server_limit, MAX_SERVER_LIMIT); } server_limit = MAX_SERVER_LIMIT; } else if (server_limit < 1) { if (startup) { ap_log_error(APLOG_MARK, APLOG_WARNING | APLOG_STARTUP, 0, NULL, APLOGNO(00302) "WARNING: ServerLimit of %d not allowed, " "increasing to 1.", server_limit); } else { ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s, APLOGNO(00303) "ServerLimit of %d not allowed, increasing to 1", server_limit); } server_limit = 1; } /* you cannot change ServerLimit across a restart; ignore * any such attempts */ if (!retained->first_server_limit) { retained->first_server_limit = server_limit; } else if (server_limit != retained->first_server_limit) { /* don't need a startup console version here */ ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s, APLOGNO(00304) "changing ServerLimit to %d from original value of %d " "not allowed during restart", server_limit, retained->first_server_limit); server_limit = retained->first_server_limit; } if (thread_limit > MAX_THREAD_LIMIT) { if (startup) { ap_log_error(APLOG_MARK, APLOG_WARNING | APLOG_STARTUP, 0, NULL, APLOGNO(00305) "WARNING: ThreadLimit of %d exceeds compile-time " "limit of %d threads, decreasing to %d.", thread_limit, MAX_THREAD_LIMIT, MAX_THREAD_LIMIT); } else { ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s, APLOGNO(00306) "ThreadLimit of %d exceeds compile-time limit " "of %d, decreasing to match", thread_limit, MAX_THREAD_LIMIT); } thread_limit = MAX_THREAD_LIMIT; } else if (thread_limit < 1) { if (startup) { ap_log_error(APLOG_MARK, APLOG_WARNING | APLOG_STARTUP, 0, NULL, APLOGNO(00307) "WARNING: ThreadLimit of %d not allowed, " "increasing to 1.", thread_limit); } else { ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s, APLOGNO(00308) "ThreadLimit of %d not allowed, increasing to 1", thread_limit); } thread_limit = 1; } /* you cannot change ThreadLimit across a restart; ignore * any such attempts */ if (!retained->first_thread_limit) { retained->first_thread_limit = thread_limit; } else if (thread_limit != retained->first_thread_limit) { /* don't need a startup console version here */ ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s, APLOGNO(00309) "changing ThreadLimit to %d from original value of %d " "not allowed during restart", thread_limit, retained->first_thread_limit); thread_limit = retained->first_thread_limit; } if (threads_per_child > thread_limit) { if (startup) { ap_log_error(APLOG_MARK, APLOG_WARNING | APLOG_STARTUP, 0, NULL, APLOGNO(00310) "WARNING: ThreadsPerChild of %d exceeds ThreadLimit " "of %d threads, decreasing to %d. " "To increase, please see the ThreadLimit directive.", threads_per_child, thread_limit, thread_limit); } else { ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s, APLOGNO(00311) "ThreadsPerChild of %d exceeds ThreadLimit " "of %d, decreasing to match", threads_per_child, thread_limit); } threads_per_child = thread_limit; } else if (threads_per_child < 1) { if (startup) { ap_log_error(APLOG_MARK, APLOG_WARNING | APLOG_STARTUP, 0, NULL, APLOGNO(00312) "WARNING: ThreadsPerChild of %d not allowed, " "increasing to 1.", threads_per_child); } else { ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s, APLOGNO(00313) "ThreadsPerChild of %d not allowed, increasing to 1", threads_per_child); } threads_per_child = 1; } if (max_workers < threads_per_child) { if (startup) { ap_log_error(APLOG_MARK, APLOG_WARNING | APLOG_STARTUP, 0, NULL, APLOGNO(00314) "WARNING: MaxRequestWorkers of %d is less than " "ThreadsPerChild of %d, increasing to %d. " "MaxRequestWorkers must be at least as large " "as the number of threads in a single server.", max_workers, threads_per_child, threads_per_child); } else { ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s, APLOGNO(00315) "MaxRequestWorkers of %d is less than ThreadsPerChild " "of %d, increasing to match", max_workers, threads_per_child); } max_workers = threads_per_child; } ap_daemons_limit = max_workers / threads_per_child; if (max_workers % threads_per_child) { int tmp_max_workers = ap_daemons_limit * threads_per_child; if (startup) { ap_log_error(APLOG_MARK, APLOG_WARNING | APLOG_STARTUP, 0, NULL, APLOGNO(00316) "WARNING: MaxRequestWorkers of %d is not an integer " "multiple of ThreadsPerChild of %d, decreasing to nearest " "multiple %d, for a maximum of %d servers.", max_workers, threads_per_child, tmp_max_workers, ap_daemons_limit); } else { ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s, APLOGNO(00317) "MaxRequestWorkers of %d is not an integer multiple of " "ThreadsPerChild of %d, decreasing to nearest " "multiple %d", max_workers, threads_per_child, tmp_max_workers); } max_workers = tmp_max_workers; } if (ap_daemons_limit > server_limit) { if (startup) { ap_log_error(APLOG_MARK, APLOG_WARNING | APLOG_STARTUP, 0, NULL, APLOGNO(00318) "WARNING: MaxRequestWorkers of %d would require %d " "servers and would exceed ServerLimit of %d, decreasing to %d. " "To increase, please see the ServerLimit directive.", max_workers, ap_daemons_limit, server_limit, server_limit * threads_per_child); } else { ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s, APLOGNO(00319) "MaxRequestWorkers of %d would require %d servers and " "exceed ServerLimit of %d, decreasing to %d", max_workers, ap_daemons_limit, server_limit, server_limit * threads_per_child); } ap_daemons_limit = server_limit; } /* ap_daemons_to_start > ap_daemons_limit checked in worker_run() */ if (ap_daemons_to_start < 1) { if (startup) { ap_log_error(APLOG_MARK, APLOG_WARNING | APLOG_STARTUP, 0, NULL, APLOGNO(00320) "WARNING: StartServers of %d not allowed, " "increasing to 1.", ap_daemons_to_start); } else { ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s, APLOGNO(00321) "StartServers of %d not allowed, increasing to 1", ap_daemons_to_start); } ap_daemons_to_start = 1; } if (min_spare_threads < 1) { if (startup) { ap_log_error(APLOG_MARK, APLOG_WARNING | APLOG_STARTUP, 0, NULL, APLOGNO(00322) "WARNING: MinSpareThreads of %d not allowed, " "increasing to 1 to avoid almost certain server failure. " "Please read the documentation.", min_spare_threads); } else { ap_log_error(APLOG_MARK, APLOG_WARNING, 0, s, APLOGNO(00323) "MinSpareThreads of %d not allowed, increasing to 1", min_spare_threads); } min_spare_threads = 1; } /* max_spare_threads < min_spare_threads + threads_per_child * checked in worker_run() */ return OK; } static void worker_hooks(apr_pool_t *p) { /* Our open_logs hook function must run before the core's, or stderr * will be redirected to a file, and the messages won't print to the * console. */ static const char *const aszSucc[] = {"core.c", NULL}; one_process = 0; ap_hook_open_logs(worker_open_logs, NULL, aszSucc, APR_HOOK_REALLY_FIRST); /* we need to set the MPM state before other pre-config hooks use MPM query * to retrieve it, so register as REALLY_FIRST */ ap_hook_pre_config(worker_pre_config, NULL, NULL, APR_HOOK_REALLY_FIRST); ap_hook_check_config(worker_check_config, NULL, NULL, APR_HOOK_MIDDLE); ap_hook_mpm(worker_run, NULL, NULL, APR_HOOK_MIDDLE); ap_hook_mpm_query(worker_query, NULL, NULL, APR_HOOK_MIDDLE); ap_hook_mpm_get_name(worker_get_name, NULL, NULL, APR_HOOK_MIDDLE); } static const char *set_daemons_to_start(cmd_parms *cmd, void *dummy, const char *arg) { const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY); if (err != NULL) { return err; } ap_daemons_to_start = atoi(arg); return NULL; } static const char *set_min_spare_threads(cmd_parms *cmd, void *dummy, const char *arg) { const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY); if (err != NULL) { return err; } min_spare_threads = atoi(arg); return NULL; } static const char *set_max_spare_threads(cmd_parms *cmd, void *dummy, const char *arg) { const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY); if (err != NULL) { return err; } max_spare_threads = atoi(arg); return NULL; } static const char *set_max_workers (cmd_parms *cmd, void *dummy, const char *arg) { const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY); if (err != NULL) { return err; } if (!strcasecmp(cmd->cmd->name, "MaxClients")) { ap_log_error(APLOG_MARK, APLOG_INFO, 0, NULL, APLOGNO(00324) "MaxClients is deprecated, use MaxRequestWorkers " "instead."); } max_workers = atoi(arg); return NULL; } static const char *set_threads_per_child (cmd_parms *cmd, void *dummy, const char *arg) { const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY); if (err != NULL) { return err; } threads_per_child = atoi(arg); return NULL; } static const char *set_server_limit (cmd_parms *cmd, void *dummy, const char *arg) { const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY); if (err != NULL) { return err; } server_limit = atoi(arg); return NULL; } static const char *set_thread_limit (cmd_parms *cmd, void *dummy, const char *arg) { const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY); if (err != NULL) { return err; } thread_limit = atoi(arg); return NULL; } static const command_rec worker_cmds[] = { LISTEN_COMMANDS, AP_INIT_TAKE1("StartServers", set_daemons_to_start, NULL, RSRC_CONF, "Number of child processes launched at server startup"), AP_INIT_TAKE1("MinSpareThreads", set_min_spare_threads, NULL, RSRC_CONF, "Minimum number of idle threads, to handle request spikes"), AP_INIT_TAKE1("MaxSpareThreads", set_max_spare_threads, NULL, RSRC_CONF, "Maximum number of idle threads"), AP_INIT_TAKE1("MaxRequestWorkers", set_max_workers, NULL, RSRC_CONF, "Maximum number of threads alive at the same time"), AP_INIT_TAKE1("MaxClients", set_max_workers, NULL, RSRC_CONF, "Deprecated name of MaxRequestWorkers"), AP_INIT_TAKE1("ThreadsPerChild", set_threads_per_child, NULL, RSRC_CONF, "Number of threads each child creates"), AP_INIT_TAKE1("ServerLimit", set_server_limit, NULL, RSRC_CONF, "Maximum number of child processes for this run of Apache"), AP_INIT_TAKE1("ThreadLimit", set_thread_limit, NULL, RSRC_CONF, "Maximum number of worker threads per child process for this run of Apache - Upper limit for ThreadsPerChild"), AP_GRACEFUL_SHUTDOWN_TIMEOUT_COMMAND, { NULL } }; AP_DECLARE_MODULE(mpm_worker) = { MPM20_MODULE_STUFF, NULL, /* hook to run before apache parses args */ NULL, /* create per-directory config structure */ NULL, /* merge per-directory config structures */ NULL, /* create per-server config structure */ NULL, /* merge per-server config structures */ worker_cmds, /* command apr_table_t */ worker_hooks /* register_hooks */ };