diff options
Diffstat (limited to '')
| -rw-r--r-- | bin/tests/system/additional/tests.sh | 330 |
1 files changed, 330 insertions, 0 deletions
diff --git a/bin/tests/system/additional/tests.sh b/bin/tests/system/additional/tests.sh new file mode 100644 index 0000000..692af54 --- /dev/null +++ b/bin/tests/system/additional/tests.sh @@ -0,0 +1,330 @@ +#!/bin/sh +# +# Copyright (C) Internet Systems Consortium, Inc. ("ISC") +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, You can obtain one at http://mozilla.org/MPL/2.0/. +# +# See the COPYRIGHT file distributed with this work for additional +# information regarding copyright ownership. + +SYSTEMTESTTOP=.. +. $SYSTEMTESTTOP/conf.sh + +DIGOPTS="-p ${PORT}" +RNDCCMD="$RNDC -c $SYSTEMTESTTOP/common/rndc.conf -p ${CONTROLPORT} -s" + +status=0 +n=0 + +dotests() { + n=`expr $n + 1` + echo_i "test with RT, single zone (+rec) ($n)" + ret=0 + $DIG $DIGOPTS +rec -t RT rt.rt.example @10.53.0.1 > dig.out.$n || ret=1 + if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 + fi + + n=`expr $n + 1` + echo_i "test with RT, two zones (+rec) ($n)" + ret=0 + $DIG $DIGOPTS +rec -t RT rt.rt2.example @10.53.0.1 > dig.out.$n || ret=1 + if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 + fi + + n=`expr $n + 1` + echo_i "test with NAPTR, single zone (+rec) ($n)" + ret=0 + $DIG $DIGOPTS +rec -t NAPTR nap.naptr.example @10.53.0.1 > dig.out.$n || ret=1 + if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 + fi + + n=`expr $n + 1` + echo_i "test with NAPTR, two zones (+rec) ($n)" + ret=0 + $DIG $DIGOPTS +rec -t NAPTR nap.hang3b.example @10.53.0.1 > dig.out.$n || ret=1 + if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 + fi + + n=`expr $n + 1` + echo_i "test with LP (+rec) ($n)" + ret=0 + $DIG $DIGOPTS +rec -t LP nid2.nid.example @10.53.0.1 > dig.out.$n || ret=1 + case $minimal in + no) + grep -w "NS" dig.out.$n > /dev/null || ret=1 + grep -w "L64" dig.out.$n > /dev/null || ret=1 + grep -w "L32" dig.out.$n > /dev/null || ret=1 + ;; + yes) + grep -w "NS" dig.out.$n > /dev/null && ret=1 + grep -w "L64" dig.out.$n > /dev/null && ret=1 + grep -w "L32" dig.out.$n > /dev/null && ret=1 + ;; + no-auth) + grep -w "NS" dig.out.$n > /dev/null && ret=1 + grep -w "L64" dig.out.$n > /dev/null || ret=1 + grep -w "L32" dig.out.$n > /dev/null || ret=1 + ;; + no-auth-recursive) + grep -w "NS" dig.out.$n > /dev/null && ret=1 + grep -w "L64" dig.out.$n > /dev/null || ret=1 + grep -w "L32" dig.out.$n > /dev/null || ret=1 + ;; + esac + if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 + fi + + n=`expr $n + 1` + echo_i "test with NID (+rec) ($n)" + ret=0 + $DIG $DIGOPTS +rec -t NID ns1.nid.example @10.53.0.1 > dig.out.$n || ret=1 + if [ $minimal = no ] ; then + # change && to || when we support NID additional processing + grep -w "L64" dig.out.$n > /dev/null && ret=1 + grep -w "L32" dig.out.$n > /dev/null && ret=1 + else + grep -w "L64" dig.out.$n > /dev/null && ret=1 + grep -w "L32" dig.out.$n > /dev/null && ret=1 + fi + if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 + fi + + n=`expr $n + 1` + echo_i "test with NID + LP (+rec) ($n)" + ret=0 + $DIG $DIGOPTS +rec -t NID nid2.nid.example @10.53.0.1 > dig.out.$n || ret=1 + if [ $minimal = no ] ; then + # change && to || when we support NID additional processing + grep -w "LP" dig.out.$n > /dev/null && ret=1 + grep -w "L64" dig.out.$n > /dev/null && ret=1 + grep -w "L32" dig.out.$n > /dev/null && ret=1 + else + grep -w "LP" dig.out.$n > /dev/null && ret=1 + grep -w "L64" dig.out.$n > /dev/null && ret=1 + grep -w "L32" dig.out.$n > /dev/null && ret=1 + fi + if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 + fi + + n=`expr $n + 1` + echo_i "test with RT, single zone (+norec) ($n)" + ret=0 + $DIG $DIGOPTS +norec -t RT rt.rt.example @10.53.0.1 > dig.out.$n || ret=1 + if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 + fi + + n=`expr $n + 1` + echo_i "test with RT, two zones (+norec) ($n)" + ret=0 + $DIG $DIGOPTS +norec -t RT rt.rt2.example @10.53.0.1 > dig.out.$n || ret=1 + if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 + fi + + n=`expr $n + 1` + echo_i "test with NAPTR, single zone (+norec) ($n)" + ret=0 + $DIG $DIGOPTS +norec -t NAPTR nap.naptr.example @10.53.0.1 > dig.out.$n || ret=1 + if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 + fi + + n=`expr $n + 1` + echo_i "test with NAPTR, two zones (+norec) ($n)" + ret=0 + $DIG $DIGOPTS +norec -t NAPTR nap.hang3b.example @10.53.0.1 > dig.out.$n || ret=1 + if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 + fi + + n=`expr $n + 1` + echo_i "test with LP (+norec) ($n)" + ret=0 + $DIG $DIGOPTS +norec -t LP nid2.nid.example @10.53.0.1 > dig.out.$n || ret=1 + case $minimal in + no) + grep -w "NS" dig.out.$n > /dev/null || ret=1 + grep -w "L64" dig.out.$n > /dev/null || ret=1 + grep -w "L32" dig.out.$n > /dev/null || ret=1 + ;; + yes) + grep -w "NS" dig.out.$n > /dev/null && ret=1 + grep -w "L64" dig.out.$n > /dev/null && ret=1 + grep -w "L32" dig.out.$n > /dev/null && ret=1 + ;; + no-auth) + grep -w "NS" dig.out.$n > /dev/null && ret=1 + grep -w "L64" dig.out.$n > /dev/null || ret=1 + grep -w "L32" dig.out.$n > /dev/null || ret=1 + ;; + no-auth-recursive) + grep -w "NS" dig.out.$n > /dev/null || ret=1 + grep -w "L64" dig.out.$n > /dev/null || ret=1 + grep -w "L32" dig.out.$n > /dev/null || ret=1 + ;; + esac + if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 + fi + + n=`expr $n + 1` + echo_i "test with NID (+norec) ($n)" + ret=0 + $DIG $DIGOPTS +norec -t NID ns1.nid.example @10.53.0.1 > dig.out.$n || ret=1 + if [ $minimal = no ] ; then + # change && to || when we support NID additional processing + grep -w "L64" dig.out.$n > /dev/null && ret=1 + grep -w "L32" dig.out.$n > /dev/null && ret=1 + else + grep -w "L64" dig.out.$n > /dev/null && ret=1 + grep -w "L32" dig.out.$n > /dev/null && ret=1 + fi + if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 + fi + + n=`expr $n + 1` + echo_i "test with NID + LP (+norec) ($n)" + ret=0 + $DIG $DIGOPTS +norec -t NID nid2.nid.example @10.53.0.1 > dig.out.$n || ret=1 + if [ $minimal = no ] ; then + # change && to || when we support NID additional processing + grep -w "LP" dig.out.$n > /dev/null && ret=1 + grep -w "L64" dig.out.$n > /dev/null && ret=1 + grep -w "L32" dig.out.$n > /dev/null && ret=1 + else + grep -w "LP" dig.out.$n > /dev/null && ret=1 + grep -w "L64" dig.out.$n > /dev/null && ret=1 + grep -w "L32" dig.out.$n > /dev/null && ret=1 + fi + if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 + fi +} + +echo_i "testing with 'minimal-responses yes;'" +minimal=yes +dotests + +echo_i "reconfiguring server: minimal-responses no" +copy_setports ns1/named2.conf.in ns1/named.conf +$RNDCCMD 10.53.0.1 reconfig 2>&1 | sed 's/^/ns1 /' | cat_i +sleep 2 + +echo_i "testing with 'minimal-responses no;'" +minimal=no +dotests + +n=`expr $n + 1` +echo_i "testing with 'minimal-any no;' ($n)" +ret=0 +$DIG $DIGOPTS -t ANY www.rt.example @10.53.0.1 > dig.out.$n || ret=1 +grep "ANSWER: 3, AUTHORITY: 1, ADDITIONAL: 2" dig.out.$n > /dev/null || ret=1 +if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 +fi + +echo_i "reconfiguring server: minimal-any yes" +copy_setports ns1/named3.conf.in ns1/named.conf +$RNDCCMD 10.53.0.1 reconfig 2>&1 | sed 's/^/ns1 /' | cat_i +sleep 2 + +n=`expr $n + 1` +echo_i "testing with 'minimal-any yes;' over UDP ($n)" +ret=0 +$DIG $DIGOPTS -t ANY +notcp www.rt.example @10.53.0.1 > dig.out.$n || ret=1 +grep "ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1" dig.out.$n > /dev/null || ret=1 +if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 +fi +n=`expr $n + 1` + +echo_i "testing with 'minimal-any yes;' over TCP ($n)" +ret=0 +$DIG $DIGOPTS -t ANY +tcp www.rt.example @10.53.0.1 > dig.out.$n || ret=1 +grep "ANSWER: 3, AUTHORITY: 0, ADDITIONAL: 1" dig.out.$n > /dev/null || ret=1 +if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 +fi + +n=`expr $n + 1` +echo_i "testing with 'minimal-any yes;' over UDP ($n)" +ret=0 +$DIG $DIGOPTS -t ANY +notcp www.rt.example @10.53.0.1 > dig.out.$n || ret=1 +grep "ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1" dig.out.$n > /dev/null || ret=1 +if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 +fi + +echo_i "testing with 'minimal-responses no-auth;'" +minimal=no-auth +dotests + +echo_i "reconfiguring server: minimal-responses no-auth-recursive" +copy_setports ns1/named4.conf.in ns1/named.conf +$RNDCCMD 10.53.0.1 reconfig 2>&1 | sed 's/^/ns1 /' | cat_i +sleep 2 + +echo_i "testing with 'minimal-responses no-auth-recursive;'" +minimal=no-auth-recursive +dotests + +n=`expr $n + 1` +echo_i "testing returning TLSA records with MX query ($n)" +ret=0 +$DIG $DIGOPTS -t mx mx.example @10.53.0.1 > dig.out.$n || ret=1 +grep "mx\.example\..*MX.0 mail\.mx\.example" dig.out.$n > /dev/null || ret=1 +grep "mail\.mx\.example\..*A.1\.2\.3\.4" dig.out.$n > /dev/null || ret=1 +grep "_25\._tcp\.mail\.mx\.example\..*TLSA.3 0 1 5B30F9602297D558EB719162C225088184FAA32CA45E1ED15DE58A21 D9FCE383" dig.out.$n > /dev/null || ret=1 +if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 +fi + +n=`expr $n + 1` +echo_i "testing returning TLSA records with SRV query ($n)" +ret=0 +$DIG $DIGOPTS -t srv _xmpp-client._tcp.srv.example @10.53.0.1 > dig.out.$n || ret=1 +grep "_xmpp-client\._tcp\.srv\.example\..*SRV.1 0 5222 server\.srv\.example" dig.out.$n > /dev/null || ret=1 +grep "server\.srv\.example\..*A.1\.2\.3\.4" dig.out.$n > /dev/null || ret=1 +grep "_5222\._tcp\.server\.srv\.example\..*TLSA.3 0 1 5B30F9602297D558EB719162C225088184FAA32CA45E1ED15DE58A21 D9FCE383" dig.out.$n > /dev/null || ret=1 +if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 +fi + +echo_i "reconfiguring server: minimal-responses no" +copy_setports ns1/named2.conf.in ns1/named.conf +$RNDCCMD 10.53.0.1 reconfig 2>&1 | sed 's/^/ns1 /' | cat_i +sleep 2 + +n=`expr $n + 1` +echo_i "testing NS handling in ANY responses (authoritative) ($n)" +ret=0 +$DIG $DIGOPTS -t ANY rt.example @10.53.0.1 > dig.out.$n || ret=1 +grep "AUTHORITY: 0" dig.out.$n > /dev/null || ret=1 +grep "NS[ ]*ns" dig.out.$n > /dev/null || ret=1 +if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 +fi + +n=`expr $n + 1` +echo_i "testing NS handling in ANY responses (recursive) ($n)" +ret=0 +$DIG $DIGOPTS -t ANY rt.example @10.53.0.3 > dig.out.$n || ret=1 +grep "AUTHORITY: 0" dig.out.$n > /dev/null || ret=1 +grep "NS[ ]*ns" dig.out.$n > /dev/null || ret=1 +if [ $ret -eq 1 ] ; then + echo_i " failed"; status=1 +fi + +echo_i "exit status: $status" +[ $status -eq 0 ] || exit 1 |