summaryrefslogtreecommitdiffstats
path: root/bin/tests/system/inline/tests.sh
diff options
context:
space:
mode:
Diffstat (limited to '')
-rwxr-xr-xbin/tests/system/inline/tests.sh1369
1 files changed, 1369 insertions, 0 deletions
diff --git a/bin/tests/system/inline/tests.sh b/bin/tests/system/inline/tests.sh
new file mode 100755
index 0000000..997d81a
--- /dev/null
+++ b/bin/tests/system/inline/tests.sh
@@ -0,0 +1,1369 @@
+#!/bin/sh
+#
+# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+# See the COPYRIGHT file distributed with this work for additional
+# information regarding copyright ownership.
+
+SYSTEMTESTTOP=..
+. $SYSTEMTESTTOP/conf.sh
+
+DIGOPTS="+tcp +dnssec -p ${PORT}"
+RNDCCMD="$RNDC -c $SYSTEMTESTTOP/common/rndc.conf -p ${CONTROLPORT} -s"
+
+status=0
+n=0
+
+$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 - nsec3 > /dev/null 2>&1
+
+for i in 1 2 3 4 5 6 7 8 9 0
+do
+ nsec3param=`$DIG $DIGOPTS +nodnssec +short @10.53.0.3 nsec3param nsec3.`
+ test "$nsec3param" = "1 0 0 -" && break
+ sleep 1
+done
+
+n=`expr $n + 1`
+echo_i "checking that rrsigs are replaced with ksk only ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.3 axfr nsec3. |
+ awk '/RRSIG NSEC3/ {a[$1]++} END { for (i in a) {if (a[i] != 1) exit (1)}}' || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking that the zone is signed on initial transfer ($n)"
+ret=0
+for i in 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
+do
+ ret=0
+ $RNDCCMD 10.53.0.3 signing -list bits > signing.out.test$n 2>&1
+ keys=`grep '^Done signing' signing.out.test$n | wc -l`
+ [ $keys = 2 ] || ret=1
+ if [ $ret = 0 ]; then break; fi
+ sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking expired signatures are updated on load ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.3 +noall +answer +dnssec expired SOA > dig.out.ns3.test$n
+expiry=`awk '$4 == "RRSIG" { print $9 }' dig.out.ns3.test$n`
+[ "$expiry" = "20110101000000" ] && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking removal of private type record via 'rndc signing -clear' ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 signing -list bits > signing.out.test$n 2>&1
+keys=`sed -n -e 's/Done signing with key \(.*\)$/\1/p' signing.out.test$n`
+for key in $keys; do
+ $RNDCCMD 10.53.0.3 signing -clear ${key} bits > /dev/null || ret=1
+ break; # We only want to remove 1 record for now.
+done 2>&1 |sed 's/^/ns3 /' | cat_i
+
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+ ans=0
+ $RNDCCMD 10.53.0.3 signing -list bits > signing.out.test$n 2>&1
+ num=`grep "Done signing with" signing.out.test$n | wc -l`
+ [ $num = 1 ] && break
+ sleep 1
+done
+[ $ans = 0 ] || ret=1
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking private type was properly signed ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.6 bits TYPE65534 > dig.out.ns6.test$n
+grep "ANSWER: 2," dig.out.ns6.test$n > /dev/null || ret=1
+grep "flags:.* ad[ ;]" dig.out.ns6.test$n > /dev/null || ret=1
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking removal of remaining private type record via 'rndc signing -clear all' ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 signing -clear all bits > /dev/null || ret=1
+
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+ ans=0
+ $RNDCCMD 10.53.0.3 signing -list bits > signing.out.test$n 2>&1
+ grep "No signing records found" signing.out.test$n > /dev/null || ans=1
+ [ $ans = 1 ] || break
+ sleep 1
+done
+[ $ans = 0 ] || ret=1
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking negative private type response was properly signed ($n)"
+ret=0
+sleep 1
+$DIG $DIGOPTS @10.53.0.6 bits TYPE65534 > dig.out.ns6.test$n
+grep "status: NOERROR" dig.out.ns6.test$n > /dev/null || ret=1
+grep "ANSWER: 0," dig.out.ns6.test$n > /dev/null || ret=1
+grep "flags:.* ad[ ;]" dig.out.ns6.test$n > /dev/null || ret=1
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+$NSUPDATE << EOF
+zone bits
+server 10.53.0.2 ${PORT}
+update add added.bits 0 A 1.2.3.4
+send
+EOF
+
+n=`expr $n + 1`
+echo_i "checking that the record is added on the hidden master ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.2 added.bits A > dig.out.ns2.test$n
+grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking that update has been transfered and has been signed ($n)"
+ret=0
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+ ret=0
+ $DIG $DIGOPTS @10.53.0.3 added.bits A > dig.out.ns3.test$n
+ grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+ grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+ if [ $ret = 0 ]; then break; fi
+ sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+$NSUPDATE << EOF
+zone bits
+server 10.53.0.2 ${PORT}
+update add bits 0 SOA ns2.bits. . 2011072400 20 20 1814400 3600
+send
+EOF
+
+n=`expr $n + 1`
+echo_i "checking YYYYMMDDVV (2011072400) serial on hidden master ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.2 bits SOA > dig.out.ns2.test$n
+grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1
+grep "2011072400" dig.out.ns2.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking YYYYMMDDVV (2011072400) serial in signed zone ($n)"
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+ ret=0
+ $DIG $DIGOPTS @10.53.0.3 bits SOA > dig.out.ns3.test$n
+ grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+ grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+ grep "2011072400" dig.out.ns3.test$n > /dev/null || ret=1
+ if [ $ret = 0 ]; then break; fi
+ sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking that the zone is signed on initial transfer, noixfr ($n)"
+ret=0
+for i in 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
+do
+ ret=0
+ $RNDCCMD 10.53.0.3 signing -list noixfr > signing.out.test$n 2>&1
+ keys=`grep '^Done signing' signing.out.test$n | wc -l`
+ [ $keys = 2 ] || ret=1
+ if [ $ret = 0 ]; then break; fi
+ sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+$NSUPDATE << EOF
+zone noixfr
+server 10.53.0.4 ${PORT}
+update add added.noixfr 0 A 1.2.3.4
+send
+EOF
+
+n=`expr $n + 1`
+echo_i "checking that the record is added on the hidden master, noixfr ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.4 added.noixfr A > dig.out.ns4.test$n
+grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.ns4.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking that update has been transfered and has been signed, noixfr ($n)"
+ret=0
+for i in 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
+do
+ ret=0
+ $DIG $DIGOPTS @10.53.0.3 added.noixfr A > dig.out.ns3.test$n
+ grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+ grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+ if [ $ret = 0 ]; then break; fi
+ sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+$NSUPDATE << EOF
+zone noixfr
+server 10.53.0.4 ${PORT}
+update add noixfr 0 SOA ns4.noixfr. . 2011072400 20 20 1814400 3600
+send
+EOF
+
+n=`expr $n + 1`
+echo_i "checking YYYYMMDDVV (2011072400) serial on hidden master, noixfr ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.4 noixfr SOA > dig.out.ns4.test$n
+grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.ns4.test$n > /dev/null || ret=1
+grep "2011072400" dig.out.ns4.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking YYYYMMDDVV (2011072400) serial in signed zone, noixfr ($n)"
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+ ret=0
+ $DIG $DIGOPTS @10.53.0.3 noixfr SOA > dig.out.ns3.test$n
+ grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+ grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+ grep "2011072400" dig.out.ns3.test$n > /dev/null || ret=1
+ if [ $ret = 0 ]; then break; fi
+ sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking that the master zone signed on initial load ($n)"
+ret=0
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+ ret=0
+ $RNDCCMD 10.53.0.3 signing -list master > signing.out.test$n 2>&1
+ keys=`grep '^Done signing' signing.out.test$n | wc -l`
+ [ $keys = 2 ] || ret=1
+ if [ $ret = 0 ]; then break; fi
+ sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking removal of private type record via 'rndc signing -clear' (master) ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 signing -list master > signing.out.test$n 2>&1
+keys=`sed -n -e 's/Done signing with key \(.*\)$/\1/p' signing.out.test$n`
+for key in $keys; do
+ $RNDCCMD 10.53.0.3 signing -clear ${key} master > /dev/null || ret=1
+ break; # We only want to remove 1 record for now.
+done 2>&1 |sed 's/^/ns3 /' | cat_i
+
+for i in 1 2 3 4 5 6 7 8 9
+do
+ ans=0
+ $RNDCCMD 10.53.0.3 signing -list master > signing.out.test$n 2>&1
+ num=`grep "Done signing with" signing.out.test$n | wc -l`
+ [ $num = 1 ] && break
+ sleep 1
+done
+[ $ans = 0 ] || ret=1
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking private type was properly signed (master) ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.6 master TYPE65534 > dig.out.ns6.test$n
+grep "ANSWER: 2," dig.out.ns6.test$n > /dev/null || ret=1
+grep "flags:.* ad[ ;]" dig.out.ns6.test$n > /dev/null || ret=1
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking removal of remaining private type record via 'rndc signing -clear' (master) ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 signing -clear all master > /dev/null || ret=1
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+ ans=0
+ $RNDCCMD 10.53.0.3 signing -list master > signing.out.test$n 2>&1
+ grep "No signing records found" signing.out.test$n > /dev/null || ans=1
+ [ $ans = 1 ] || break
+ sleep 1
+done
+[ $ans = 0 ] || ret=1
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "check adding of record to unsigned master ($n)"
+ret=0
+cp ns3/master2.db.in ns3/master.db
+$RNDCCMD 10.53.0.3 reload master 2>&1 | sed 's/^/ns3 /' | cat_i
+for i in 1 2 3 4 5 6 7 8 9
+do
+ ans=0
+ $DIG $DIGOPTS @10.53.0.3 e.master A > dig.out.ns3.test$n
+ grep "10.0.0.5" dig.out.ns3.test$n > /dev/null || ans=1
+ grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ans=1
+ [ $ans = 1 ] || break
+ sleep 1
+done
+[ $ans = 0 ] || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "check adding record fails when SOA serial not changed ($n)"
+ret=0
+echo "c A 10.0.0.3" >> ns3/master.db
+$RNDCCMD 10.53.0.3 reload 2>&1 | sed 's/^/ns3 /' | cat_i
+sleep 1
+$DIG $DIGOPTS @10.53.0.3 c.master A > dig.out.ns3.test$n
+grep "NXDOMAIN" dig.out.ns3.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "check adding record works after updating SOA serial ($n)"
+ret=0
+cp ns3/master3.db.in ns3/master.db
+$RNDCCMD 10.53.0.3 reload master 2>&1 | sed 's/^/ns3 /' | cat_i
+for i in 1 2 3 4 5 6 7 8 9
+do
+ ans=0
+ $DIG $DIGOPTS @10.53.0.3 c.master A > dig.out.ns3.test$n
+ grep "10.0.0.3" dig.out.ns3.test$n > /dev/null || ans=1
+ grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ans=1
+ [ $ans = 1 ] || break
+ sleep 1
+done
+[ $ans = 0 ] || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "check the added record was properly signed ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.3 e.master A > dig.out.ns6.test$n
+grep "10.0.0.5" dig.out.ns6.test$n > /dev/null || ans=1
+grep "ANSWER: 2," dig.out.ns6.test$n > /dev/null || ans=1
+grep "flags:.* ad[ ;]" dig.out.ns6.test$n > /dev/null || ans=1
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking that the dynamic master zone signed on initial load ($n)"
+ret=0
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+ ret=0
+ $RNDCCMD 10.53.0.3 signing -list dynamic > signing.out.test$n 2>&1
+ keys=`grep '^Done signing' signing.out.test$n | wc -l`
+ [ $keys = 2 ] || ret=1
+ if [ $ret = 0 ]; then break; fi
+ sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking master zone that was updated while offline is correct ($n)"
+ret=0
+serial=`$DIG $DIGOPTS +nodnssec +short @10.53.0.3 updated SOA | awk '{print $3}'`
+# serial should have changed
+[ "$serial" = "2000042407" ] && ret=1
+# e.updated should exist and should be signed
+$DIG $DIGOPTS @10.53.0.3 e.updated A > dig.out.ns3.test$n
+grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+# updated.db.signed.jnl should exist, should have the source serial
+# of master2.db, and should show a minimal diff: no more than 8 added
+# records (SOA/RRSIG, 2 x NSEC/RRSIG, A/RRSIG), and 4 removed records
+# (SOA/RRSIG, NSEC/RRSIG).
+serial=`$JOURNALPRINT ns3/updated.db.signed.jnl | head -1 | awk '{print $4}'`
+[ "$serial" = "2000042408" ] || ret=1
+diffsize=`$JOURNALPRINT ns3/updated.db.signed.jnl | wc -l`
+[ "$diffsize" -le 13 ] || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking adding of record to unsigned master using UPDATE ($n)"
+ret=0
+
+[ -f ns3/dynamic.db.jnl ] && { ret=1 ; echo_i "journal exists (pretest)" ; }
+
+$NSUPDATE << EOF
+zone dynamic
+server 10.53.0.3 ${PORT}
+update add e.dynamic 0 A 1.2.3.4
+send
+EOF
+
+[ -f ns3/dynamic.db.jnl ] || { ret=1 ; echo_i "journal does not exist (posttest)" ; }
+
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+ ans=0
+ $DIG $DIGOPTS @10.53.0.3 e.dynamic > dig.out.ns3.test$n
+ grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ans=1
+ grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ans=1
+ grep "1.2.3.4" dig.out.ns3.test$n > /dev/null || ans=1
+ [ $ans = 0 ] && break
+ sleep 1
+done
+[ $ans = 0 ] || { ret=1; echo_i "signed record not found"; cat dig.out.ns3.test$n ; }
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "stop bump in the wire signer server ($n)"
+ret=0
+$PERL ../stop.pl . ns3 || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "restart bump in the wire signer server ($n)"
+ret=0
+$PERL ../start.pl --noclean --restart --port ${PORT} . ns3 || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+$NSUPDATE << EOF
+zone bits
+server 10.53.0.2 ${PORT}
+update add bits 0 SOA ns2.bits. . 2011072450 20 20 1814400 3600
+send
+EOF
+
+n=`expr $n + 1`
+echo_i "checking YYYYMMDDVV (2011072450) serial on hidden master ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.2 bits SOA > dig.out.ns2.test$n
+grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1
+grep "2011072450" dig.out.ns2.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking YYYYMMDDVV (2011072450) serial in signed zone ($n)"
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+ ret=0
+ $DIG $DIGOPTS @10.53.0.3 bits SOA > dig.out.ns3.test$n
+ grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+ grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+ grep "2011072450" dig.out.ns3.test$n > /dev/null || ret=1
+ if [ $ret = 0 ]; then break; fi
+ sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+$NSUPDATE << EOF
+zone noixfr
+server 10.53.0.4 ${PORT}
+update add noixfr 0 SOA ns4.noixfr. . 2011072450 20 20 1814400 3600
+send
+EOF
+
+n=`expr $n + 1`
+echo_i "checking YYYYMMDDVV (2011072450) serial on hidden master, noixfr ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.4 noixfr SOA > dig.out.ns4.test$n
+grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.ns4.test$n > /dev/null || ret=1
+grep "2011072450" dig.out.ns4.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking YYYYMMDDVV (2011072450) serial in signed zone, noixfr ($n)"
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+ ret=0
+ $DIG $DIGOPTS @10.53.0.3 noixfr SOA > dig.out.ns3.test$n
+ grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+ grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+ grep "2011072450" dig.out.ns3.test$n > /dev/null || ret=1
+ if [ $ret = 0 ]; then break; fi
+ sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+$NSUPDATE << EOF
+zone bits
+server 10.53.0.3 ${PORT}
+update add bits 0 SOA ns2.bits. . 2011072460 20 20 1814400 3600
+send
+EOF
+
+n=`expr $n + 1`
+echo_i "checking forwarded update on hidden master ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.2 bits SOA > dig.out.ns2.test$n
+grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1
+grep "2011072460" dig.out.ns2.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking forwarded update on signed zone ($n)"
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+ ret=0
+ $DIG $DIGOPTS @10.53.0.3 bits SOA > dig.out.ns3.test$n
+ grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+ grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+ grep "2011072460" dig.out.ns3.test$n > /dev/null || ret=1
+ if [ $ret = 0 ]; then break; fi
+ sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+$NSUPDATE << EOF
+zone noixfr
+server 10.53.0.3 ${PORT}
+update add noixfr 0 SOA ns4.noixfr. . 2011072460 20 20 1814400 3600
+send
+EOF
+
+n=`expr $n + 1`
+echo_i "checking forwarded update on hidden master, noixfr ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.4 noixfr SOA > dig.out.ns4.test$n
+grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.ns4.test$n > /dev/null || ret=1
+grep "2011072460" dig.out.ns4.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking forwarded update on signed zone, noixfr ($n)"
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+ ret=0
+ $DIG $DIGOPTS @10.53.0.3 noixfr SOA > dig.out.ns3.test$n
+ grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+ grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+ grep "2011072460" dig.out.ns3.test$n > /dev/null || ret=1
+ if [ $ret = 0 ]; then break; fi
+ sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+ret=0
+n=`expr $n + 1`
+echo_i "checking turning on of inline signing in a slave zone via reload ($n)"
+$DIG $DIGOPTS @10.53.0.5 +dnssec bits SOA > dig.out.ns5.test$n
+grep "status: NOERROR" dig.out.ns5.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.ns5.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "setup broken"; fi
+status=`expr $status + $ret`
+
+copy_setports ns5/named.conf.post ns5/named.conf
+(cd ns5; $KEYGEN -q -r $RANDFILE bits) > /dev/null 2>&1
+(cd ns5; $KEYGEN -q -r $RANDFILE -f KSK bits) > /dev/null 2>&1
+$RNDCCMD 10.53.0.5 reload 2>&1 | sed 's/^/ns5 /' | cat_i
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+ ret=0
+ $DIG $DIGOPTS @10.53.0.5 bits SOA > dig.out.ns5.test$n
+ grep "status: NOERROR" dig.out.ns5.test$n > /dev/null || ret=1
+ grep "ANSWER: 2," dig.out.ns5.test$n > /dev/null || ret=1
+ if [ $ret = 0 ]; then break; fi
+ sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking rndc freeze/thaw of dynamic inline zone no change ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 freeze dynamic > freeze.test$n 2>&1 || { echo_i "/' < freeze.test$n"; ret=1; }
+sleep 1
+$RNDCCMD 10.53.0.3 thaw dynamic > thaw.test$n 2>&1 || { echo_i "rndc thaw dynamic failed" ; ret=1; }
+sleep 1
+grep "zone dynamic/IN (unsigned): ixfr-from-differences: unchanged" ns3/named.run > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+
+n=`expr $n + 1`
+echo_i "checking rndc freeze/thaw of dynamic inline zone ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 freeze dynamic > freeze.test$n 2>&1 || ret=1
+sleep 1
+awk '$2 == ";" && $3 == "serial" { printf("%d %s %s\n", $1 + 1, $2, $3); next; }
+ { print; }
+ END { print "freeze1.dynamic. 0 TXT freeze1"; } ' ns3/dynamic.db > ns3/dynamic.db.new
+mv ns3/dynamic.db.new ns3/dynamic.db
+$RNDCCMD 10.53.0.3 thaw dynamic > thaw.test$n 2>&1 || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "check added record freeze1.dynamic ($n)"
+for i in 1 2 3 4 5 6 7 8 9
+do
+ ret=0
+ $DIG $DIGOPTS @10.53.0.3 freeze1.dynamic TXT > dig.out.ns3.test$n
+ grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+ grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+ test $ret = 0 && break
+ sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+# allow 1 second so that file time stamps change
+sleep 1
+
+n=`expr $n + 1`
+echo_i "checking rndc freeze/thaw of server ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 freeze > freeze.test$n 2>&1 || ret=1
+sleep 1
+awk '$2 == ";" && $3 == "serial" { printf("%d %s %s\n", $1 + 1, $2, $3); next; }
+ { print; }
+ END { print "freeze2.dynamic. 0 TXT freeze2"; } ' ns3/dynamic.db > ns3/dynamic.db.new
+mv ns3/dynamic.db.new ns3/dynamic.db
+$RNDCCMD 10.53.0.3 thaw > thaw.test$n 2>&1 || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "check added record freeze2.dynamic ($n)"
+for i in 1 2 3 4 5 6 7 8 9
+do
+ ret=0
+ $DIG $DIGOPTS @10.53.0.3 freeze2.dynamic TXT > dig.out.ns3.test$n
+ grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+ grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+ test $ret = 0 && break
+ sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "check rndc reload allows reuse of inline-signing zones ($n)"
+ret=0
+{ $RNDCCMD 10.53.0.3 reload 2>&1 || ret=1 ; } | sed 's/^/ns3 /' | cat_i
+grep "not reusable" ns3/named.run > /dev/null 2>&1 && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "check rndc sync removes both signed and unsigned journals ($n)"
+ret=0
+[ -f ns3/dynamic.db.jnl ] || ret=1
+[ -f ns3/dynamic.db.signed.jnl ] || ret=1
+$RNDCCMD 10.53.0.3 sync -clean dynamic 2>&1 || ret=1
+[ -f ns3/dynamic.db.jnl ] && ret=1
+[ -f ns3/dynamic.db.signed.jnl ] && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+$NSUPDATE << EOF
+zone retransfer
+server 10.53.0.2 ${PORT}
+update add added.retransfer 0 A 1.2.3.4
+send
+
+EOF
+
+n=`expr $n + 1`
+echo_i "checking that the retransfer record is added on the hidden master ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.2 added.retransfer A > dig.out.ns2.test$n
+grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking that the change has not been transfered due to notify ($n)"
+ret=0
+for i in 0 1 2 3 4 5 6 7 8 9
+do
+ ans=0
+ $DIG $DIGOPTS @10.53.0.3 added.retransfer A > dig.out.ns3.test$n
+ grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ans=1
+ [ $ans = 0 ] && break
+ sleep 1
+done
+if [ $ans != 1 ]; then echo_i "failed"; ret=1; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "check rndc retransfer of a inline slave zone works ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 retransfer retransfer 2>&1 || ret=1
+for i in 0 1 2 3 4 5 6 7 8 9
+do
+ ans=0
+ $DIG $DIGOPTS @10.53.0.3 added.retransfer A > dig.out.ns3.test$n
+ grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ans=1
+ grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ans=1
+ [ $ans = 0 ] && break
+ sleep 1
+done
+[ $ans = 1 ] && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "check 'rndc signing -nsec3param' requests are queued for zones which are not loaded ($n)"
+ret=0
+# The "retransfer3" zone is configured with "allow-transfer { none; };" on ns2,
+# which means it should not yet be available on ns3.
+$DIG $DIGOPTS @10.53.0.3 retransfer3 SOA > dig.out.ns3.pre.test$n
+grep "status: SERVFAIL" dig.out.ns3.pre.test$n > /dev/null || ret=1
+# Switch the zone to NSEC3. An "NSEC3 -> NSEC -> NSEC3" sequence is used purely
+# to test that multiple queued "rndc signing -nsec3param" requests are handled
+# properly.
+$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 - retransfer3 > /dev/null 2>&1 || ret=1
+$RNDCCMD 10.53.0.3 signing -nsec3param none retransfer3 > /dev/null 2>&1 || ret=1
+$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 - retransfer3 > /dev/null 2>&1 || ret=1
+# Reconfigure ns2 to allow outgoing transfers for the "retransfer3" zone.
+sed "s|\(allow-transfer { none; };.*\)|// \1|;" ns2/named.conf > ns2/named.conf.new
+mv ns2/named.conf.new ns2/named.conf
+$RNDCCMD 10.53.0.2 reconfig || ret=1
+# Request ns3 to retransfer the "retransfer3" zone.
+$RNDCCMD 10.53.0.3 retransfer retransfer3 || ret=1
+# Wait until ns3 finishes building the NSEC3 chain for "retransfer3". There is
+# no need to immediately set ret=1 if building the NSEC3 chain is not finished
+# within the time limit because the query we will send shortly will detect any
+# problems anyway.
+for i in 0 1 2 3 4 5 6 7 8 9
+do
+ $RNDCCMD 10.53.0.3 signing -list retransfer3 > signing.out.test$n.$i 2>&1
+ keys_done=`grep "Done signing" signing.out.test$n.$i | wc -l`
+ nsec3_pending=`grep "NSEC3 chain" signing.out.test$n.$i | wc -l`
+ test $keys_done -eq 2 -a $nsec3_pending -eq 0 && break
+ sleep 1
+done
+# Check whether "retransfer3" uses NSEC3 as requested.
+$DIG $DIGOPTS @10.53.0.3 nonexist.retransfer3 A > dig.out.ns3.post.test$n
+grep "status: NXDOMAIN" dig.out.ns3.post.test$n > /dev/null || ret=1
+grep "NSEC3" dig.out.ns3.post.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "check rndc retransfer of a inline nsec3 slave retains nsec3 ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 - retransfer3 > /dev/null 2>&1 || ret=1
+for i in 0 1 2 3 4 5 6 7 8 9
+do
+ ans=0
+ $DIG $DIGOPTS @10.53.0.3 nonexist.retransfer3 A > dig.out.ns3.pre.test$n
+ grep "status: NXDOMAIN" dig.out.ns3.pre.test$n > /dev/null || ans=1
+ grep "NSEC3" dig.out.ns3.pre.test$n > /dev/null || ans=1
+ [ $ans = 0 ] && break
+ sleep 1
+done
+$RNDCCMD 10.53.0.3 retransfer retransfer3 2>&1 || ret=1
+for i in 0 1 2 3 4 5 6 7 8 9
+do
+ ans=0
+ $DIG $DIGOPTS @10.53.0.3 nonexist.retransfer3 A > dig.out.ns3.post.test$n
+ grep "status: NXDOMAIN" dig.out.ns3.post.test$n > /dev/null || ans=1
+ grep "NSEC3" dig.out.ns3.post.test$n > /dev/null || ans=1
+ [ $ans = 0 ] && break
+ sleep 1
+done
+[ $ans = 1 ] && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+# NOTE: The test below should be considered fragile. More details can be found
+# in the comment inside ns7/named.conf.
+n=`expr $n + 1`
+echo_i "check rndc retransfer of a inline nsec3 slave does not trigger an infinite loop ($n)"
+ret=0
+zone=nsec3-loop
+# Add slave zone using rndc
+$RNDCCMD 10.53.0.7 addzone $zone \
+ '{ type slave; masters { 10.53.0.2; }; file "'$zone'.db"; inline-signing yes; auto-dnssec maintain; };'
+# Wait until slave zone is fully signed using NSEC
+for i in 1 2 3 4 5 6 7 8 9 0
+do
+ ret=1
+ $RNDCCMD 10.53.0.7 signing -list $zone > signing.out.test$n 2>&1
+ keys=`grep '^Done signing' signing.out.test$n | wc -l`
+ [ $keys -eq 3 ] && ret=0 && break
+ sleep 1
+done
+# Switch slave zone to NSEC3
+$RNDCCMD 10.53.0.7 signing -nsec3param 1 0 2 12345678 $zone > /dev/null 2>&1
+# Wait until slave zone is fully signed using NSEC3
+for i in 1 2 3 4 5 6 7 8 9 0
+do
+ ret=1
+ nsec3param=`$DIG $DIGOPTS +nodnssec +short @10.53.0.7 nsec3param $zone`
+ test "$nsec3param" = "1 0 2 12345678" && ret=0 && break
+ sleep 1
+done
+# Attempt to retransfer the slave zone from master
+$RNDCCMD 10.53.0.7 retransfer $zone
+# Check whether the signer managed to fully sign the retransferred zone by
+# waiting for a specific SOA serial number to appear in the logs; if this
+# specific SOA serial number does not appear in the logs, it means the signer
+# has either ran into an infinite loop or crashed; note that we check the logs
+# instead of sending SOA queries to the signer as these may influence its
+# behavior in a way which may prevent the desired scenario from being
+# reproduced (see comment in ns7/named.conf)
+for i in 1 2 3 4 5 6 7 8 9 0
+do
+ ret=1
+ grep "ns2.$zone. . 10 20 20 1814400 3600" ns7/named.run > /dev/null 2>&1
+ [ $? -eq 0 ] && ret=0 && break
+ sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "stop bump in the wire signer server ($n)"
+ret=0
+$PERL ../stop.pl . ns3 || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "update SOA record while stopped"
+cp ns3/master4.db.in ns3/master.db
+rm ns3/master.db.jnl
+
+n=`expr $n + 1`
+echo_i "restart bump in the wire signer server ($n)"
+ret=0
+$PERL ../start.pl --noclean --restart --port ${PORT} . ns3 || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "updates to SOA parameters other than serial while stopped are reflected in signed zone ($n)"
+ret=0
+for i in 1 2 3 4 5 6 7 8 9
+do
+ ans=0
+ $DIG $DIGOPTS @10.53.0.3 master SOA > dig.out.ns3.test$n
+ grep "hostmaster" dig.out.ns3.test$n > /dev/null || ans=1
+ grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ans=1
+ [ $ans = 1 ] || break
+ sleep 1
+done
+[ $ans = 0 ] || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "check that reloading all zones does not cause zone maintenance to cease for inline-signed zones ($n)"
+ret=1
+# Ensure "rndc reload" attempts to load ns3/master.db by waiting 1 second so
+# that the master file modification time has no possibility of being equal to
+# the one stored during server startup.
+sleep 1
+nextpart ns3/named.run > /dev/null
+cp ns3/master5.db.in ns3/master.db
+$RNDCCMD 10.53.0.3 reload 2>&1 | sed 's/^/ns3 /' | cat_i
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+ if nextpart ns3/named.run | grep "zone master.*sending notifies" > /dev/null; then
+ ret=0
+ break
+ fi
+ sleep 1
+done
+# Sanity check: master file updates should be reflected in the signed zone,
+# i.e. SOA RNAME should no longer be set to "hostmaster".
+$DIG $DIGOPTS @10.53.0.3 master SOA > dig.out.ns3.test$n || ret=1
+grep "hostmaster" dig.out.ns3.test$n > /dev/null && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "test add/del zone combinations ($n)"
+ret=0
+for zone in a b c d e f g h i j k l m n o p q r s t u v w x y z
+do
+$RNDCCMD 10.53.0.2 addzone test-$zone \
+ '{ type master; file "bits.db.in"; allow-transfer { any; }; };'
+$DIG $DIGOPTS @10.53.0.2 test-$zone SOA > dig.out.ns2.$zone.test$n
+grep "status: NOERROR," dig.out.ns2.$zone.test$n > /dev/null || { ret=1; cat dig.out.ns2.$zone.test$n; }
+$RNDCCMD 10.53.0.3 addzone test-$zone \
+ '{ type slave; masters { 10.53.0.2; }; file "'test-$zone.bk'"; inline-signing yes; auto-dnssec maintain; allow-transfer { any; }; };'
+$RNDCCMD 10.53.0.3 delzone test-$zone > /dev/null 2>&1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "testing adding external keys to a inline zone ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.3 dnskey externalkey > dig.out.ns3.test$n
+for alg in 3 7 12 13
+do
+ [ $alg = 3 -a ! -f checkdsa ] && continue;
+ [ $alg = 12 -a ! -f checkgost ] && continue;
+ [ $alg = 13 -a ! -f checkecdsa ] && continue;
+
+ case $alg in
+ 3) echo_i "checking DSA";;
+ 7) echo_i "checking NSEC3RSASHA1";;
+ 12) echo_i "checking GOST";;
+ 13) echo_i "checking ECDSAP256SHA256";;
+ *) echo_i "checking $alg";;
+ esac
+
+ dnskeys=`grep "IN.DNSKEY.25[67] [0-9]* $alg " dig.out.ns3.test$n | wc -l`
+ rrsigs=`grep "RRSIG.DNSKEY $alg " dig.out.ns3.test$n | wc -l`
+ test ${dnskeys:-0} -eq 3 || { echo_i "failed $alg (dnskeys ${dnskeys:-0})"; ret=1; }
+ test ${rrsigs:-0} -eq 2 || { echo_i "failed $alg (rrsigs ${rrsigs:-0})"; ret=1; }
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "testing imported key won't overwrite a private key ($n)"
+ret=0
+key=`$KEYGEN -r $RANDFILE -q import.example`
+cp ${key}.key import.key
+# import should fail
+$IMPORTKEY -f import.key import.example > /dev/null 2>&1 && ret=1
+rm -f ${key}.private
+# private key removed; import should now succeed
+$IMPORTKEY -f import.key import.example > /dev/null 2>&1 || ret=1
+# now that it's an external key, re-import should succeed
+$IMPORTKEY -f import.key import.example > /dev/null 2>&1 || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "testing updating inline secure serial via 'rndc signing -serial' ($n)"
+ret=0
+$DIG $DIGOPTS nsec3. SOA @10.53.0.3 > dig.out.n3.pre.test$n
+newserial=`$PERL -e 'while (<>) { chomp; my @field = split /\s+/; printf("%u\n", $field[6] + 10) if ($field[3] eq "SOA"); }' < dig.out.n3.pre.test$n`
+$RNDCCMD 10.53.0.3 signing -serial ${newserial:-0} nsec3 > /dev/null 2>&1
+sleep 1
+$DIG $DIGOPTS nsec3. SOA @10.53.0.3 > dig.out.ns3.post.test$n
+serial=`awk '$4 == "SOA" { print $7 }' dig.out.ns3.post.test$n`
+[ ${newserial:-0} -eq ${serial:-1} ] || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "testing updating inline secure serial via 'rndc signing -serial' with negative change ($n)"
+ret=0
+$DIG $DIGOPTS nsec3. SOA @10.53.0.3 > dig.out.n3.pre.test$n
+oldserial=`awk '$4 == "SOA" { print $7 }' dig.out.n3.pre.test$n`
+newserial=`$PERL -e 'while (<>) { chomp; my @field = split /\s+/; printf("%u\n", $field[6] - 10) if ($field[3] eq "SOA"); }' < dig.out.n3.pre.test$n`
+$RNDCCMD 10.53.0.3 signing -serial ${newserial:-0} nsec3 > /dev/null 2>&1
+sleep 1
+$DIG $DIGOPTS nsec3. SOA @10.53.0.3 > dig.out.ns3.post.test$n
+serial=`awk '$4 == "SOA" { print $7 }' dig.out.ns3.post.test$n`
+[ ${oldserial:-0} -eq ${serial:-1} ] || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+#
+# Freezing only operates on the raw zone.
+#
+n=`expr $n + 1`
+echo_i "testing updating inline secure serial via 'rndc signing -serial' when frozen ($n)"
+ret=0
+$DIG $DIGOPTS nsec3. SOA @10.53.0.3 > dig.out.n3.pre.test$n
+oldserial=`awk '$4 == "SOA" { print $7 }' dig.out.n3.pre.test$n`
+newserial=`$PERL -e 'while (<>) { chomp; my @field = split /\s+/; printf("%u\n", $field[6] + 10) if ($field[3] eq "SOA"); }' < dig.out.n3.pre.test$n`
+$RNDCCMD 10.53.0.3 freeze nsec3 > /dev/null 2>&1
+$RNDCCMD 10.53.0.3 signing -serial ${newserial:-0} nsec3 > /dev/null 2>&1
+$RNDCCMD 10.53.0.3 thaw nsec3 > /dev/null 2>&1
+sleep 1
+$DIG $DIGOPTS nsec3. SOA @10.53.0.3 > dig.out.ns3.post.test$n
+serial=`awk '$4 == "SOA" { print $7 }' dig.out.ns3.post.test$n`
+[ ${newserial:-0} -eq ${serial:-1} ] || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "testing updating dynamic serial via 'rndc signing -serial' ($n)"
+ret=0
+$DIG $DIGOPTS bits. SOA @10.53.0.2 > dig.out.ns2.pre.test$n
+newserial=`$PERL -e 'while (<>) { chomp; my @field = split /\s+/; printf("%u\n", $field[6] + 10) if ($field[3] eq "SOA"); }' < dig.out.ns2.pre.test$n`
+$RNDCCMD 10.53.0.2 signing -serial ${newserial:-0} bits > /dev/null 2>&1
+sleep 1
+$DIG $DIGOPTS bits. SOA @10.53.0.2 > dig.out.ns2.post.test$n
+serial=`awk '$4 == "SOA" { print $7 }' dig.out.ns2.post.test$n`
+[ ${newserial:-0} -eq ${serial:-1} ] || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "testing updating dynamic serial via 'rndc signing -serial' with negative change ($n)"
+ret=0
+$DIG $DIGOPTS bits. SOA @10.53.0.2 > dig.out.ns2.pre.test$n
+oldserial=`awk '$4 == "SOA" { print $7 }' dig.out.ns2.pre.test$n`
+newserial=`$PERL -e 'while (<>) { chomp; my @field = split /\s+/; printf("%u\n", $field[6] - 10) if ($field[3] eq "SOA"); }' < dig.out.ns2.pre.test$n`
+$RNDCCMD 10.53.0.2 signing -serial ${newserial:-0} bits > /dev/null 2>&1
+sleep 1
+$DIG $DIGOPTS bits. SOA @10.53.0.2 > dig.out.ns2.post.test$n
+serial=`awk '$4 == "SOA" { print $7 }' dig.out.ns2.post.test$n`
+[ ${oldserial:-0} -eq ${serial:-1} ] || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "testing updating dynamic serial via 'rndc signing -serial' when frozen ($n)"
+ret=0
+$DIG $DIGOPTS bits. SOA @10.53.0.2 > dig.out.ns2.pre.test$n
+oldserial=`awk '$4 == "SOA" { print $7 }' dig.out.ns2.pre.test$n`
+newserial=`$PERL -e 'while (<>) { chomp; my @field = split /\s+/; printf("%u\n", $field[6] + 10) if ($field[3] eq "SOA"); }' < dig.out.ns2.pre.test$n`
+$RNDCCMD 10.53.0.2 freeze bits > /dev/null 2>&1
+$RNDCCMD 10.53.0.2 signing -serial ${newserial:-0} bits > /dev/null 2>&1
+$RNDCCMD 10.53.0.2 thaw bits > /dev/null 2>&1
+sleep 1
+$DIG $DIGOPTS bits. SOA @10.53.0.2 > dig.out.ns2.post.test$n
+serial=`awk '$4 == "SOA" { print $7 }' dig.out.ns2.post.test$n`
+[ ${oldserial:-0} -eq ${serial:-1} ] || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "testing that inline signing works with inactive ZSK and active KSK ($n)"
+ret=0
+
+$DIG $DIGOPTS @10.53.0.3 soa inactivezsk > dig.out.ns3.pre.test$n || ret=1
+soa1=`awk '$4 == "SOA" { print $7 }' dig.out.ns3.pre.test$n`
+
+$NSUPDATE << EOF
+server 10.53.0.2 ${PORT}
+update add added.inactivezsk 0 IN TXT added record
+send
+EOF
+
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+ $DIG $DIGOPTS @10.53.0.3 soa inactivezsk > dig.out.ns3.post.test$n || ret=1
+ soa2=`awk '$4 == "SOA" { print $7 }' dig.out.ns3.post.test$n`
+ test ${soa1:-0} -ne ${soa2:-0} && break
+ sleep 1
+done
+test ${soa1:-0} -ne ${soa2:-0} || ret=1
+
+$DIG $DIGOPTS @10.53.0.3 txt added.inactivezsk > dig.out.ns3.test$n || ret=1
+grep "ANSWER: 3," dig.out.ns3.test$n > /dev/null || ret=1
+grep "RRSIG" dig.out.ns3.test$n > /dev/null || ret=1
+grep "TXT 7 2" dig.out.ns3.test$n > /dev/null || ret=1
+grep "TXT 8 2" dig.out.ns3.test$n > /dev/null || ret=1
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "testing that inline signing works with inactive KSK and active ZSK ($n)"
+ret=0
+
+$DIG $DIGOPTS @10.53.0.3 axfr inactiveksk > dig.out.ns3.test$n
+
+#
+# check that DNSKEY is signed with ZSK for algorithm 7
+#
+awk='$4 == "DNSKEY" && $5 == 256 && $7 == 7 { print }'
+zskid=`awk "${awk}" dig.out.ns3.test$n |
+ $DSFROMKEY -A -2 -f - inactiveksk | awk '{ print $4}' `
+grep "DNSKEY 7 1 [0-9]* [0-9]* [0-9]* ${zskid} " dig.out.ns3.test$n > /dev/null || ret=1
+awk='$4 == "DNSKEY" && $5 == 257 && $7 == 7 { print }'
+kskid=`awk "${awk}" dig.out.ns3.test$n |
+ $DSFROMKEY -2 -f - inactiveksk | awk '{ print $4}' `
+grep "DNSKEY 7 1 [0-9]* [0-9]* [0-9]* ${kskid} " dig.out.ns3.test$n > /dev/null && ret=1
+
+#
+# check that DNSKEY is signed with KSK for algorithm 8
+#
+awk='$4 == "DNSKEY" && $5 == 256 && $7 == 8 { print }'
+zskid=`awk "${awk}" dig.out.ns3.test$n |
+ $DSFROMKEY -A -2 -f - inactiveksk | awk '{ print $4}' `
+grep "DNSKEY 8 1 [0-9]* [0-9]* [0-9]* ${zskid} " dig.out.ns3.test$n > /dev/null && ret=1
+awk='$4 == "DNSKEY" && $5 == 257 && $7 == 8 { print }'
+kskid=`awk "${awk}" dig.out.ns3.test$n |
+ $DSFROMKEY -2 -f - inactiveksk | awk '{ print $4}' `
+grep "DNSKEY 8 1 [0-9]* [0-9]* [0-9]* ${kskid} " dig.out.ns3.test$n > /dev/null || ret=1
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+# Wait until an update to the raw part of a given inline signed zone is fully
+# processed. As waiting for a fixed amount of time is suboptimal and there is
+# no single message that would signify both a successful modification and an
+# error in a race-free manner, instead wait until either notifies are sent
+# (which means the secure zone was modified) or a receive_secure_serial() error
+# is logged (which means the zone was not modified and will not be modified any
+# further in response to the relevant raw zone update).
+wait_until_raw_zone_update_is_processed() {
+ zone="$1"
+ for i in 1 2 3 4 5 6 7 8 9 10
+ do
+ if nextpart ns3/named.run | egrep "zone ${zone}.*(sending notifies|receive_secure_serial)" > /dev/null; then
+ return
+ fi
+ sleep 1
+ done
+}
+
+n=`expr $n + 1`
+echo_i "checking that changes to raw zone are applied to a previously unsigned secure zone ($n)"
+ret=0
+# Query for bar.nokeys/A and ensure the response is negative. As this zone
+# does not have any signing keys set up, the response must be unsigned.
+$DIG $DIGOPTS @10.53.0.3 bar.nokeys. A > dig.out.ns3.pre.test$n 2>&1 || ret=1
+grep "status: NOERROR" dig.out.ns3.pre.test$n > /dev/null && ret=1
+grep "RRSIG" dig.out.ns3.pre.test$n > /dev/null && ret=1
+# Ensure the wait_until_raw_zone_update_is_processed() call below will ignore
+# log messages generated before the raw zone is updated.
+nextpart ns3/named.run > /dev/null
+# Add a record to the raw zone on the master.
+$NSUPDATE << EOF || ret=1
+zone nokeys.
+server 10.53.0.2 ${PORT}
+update add bar.nokeys. 0 A 127.0.0.1
+send
+EOF
+wait_until_raw_zone_update_is_processed "nokeys"
+# Query for bar.nokeys/A again and ensure the signer now returns a positive,
+# yet still unsigned response.
+$DIG $DIGOPTS @10.53.0.3 bar.nokeys. A > dig.out.ns3.post.test$n 2>&1
+grep "status: NOERROR" dig.out.ns3.post.test$n > /dev/null || ret=1
+grep "RRSIG" dig.out.ns3.pre.test$n > /dev/null && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking that changes to raw zone are not applied to a previously signed secure zone with no keys available (primary) ($n)"
+ret=0
+# Query for bar.removedkeys-primary/A and ensure the response is negative. As
+# this zone has signing keys set up, the response must be signed.
+$DIG $DIGOPTS @10.53.0.3 bar.removedkeys-primary. A > dig.out.ns3.pre.test$n 2>&1 || ret=1
+grep "status: NOERROR" dig.out.ns3.pre.test$n > /dev/null && ret=1
+grep "RRSIG" dig.out.ns3.pre.test$n > /dev/null || ret=1
+# Remove the signing keys for this zone.
+mv -f ns3/Kremovedkeys-primary* ns3/removedkeys
+# Ensure the wait_until_raw_zone_update_is_processed() call below will ignore
+# log messages generated before the raw zone is updated.
+nextpart ns3/named.run > /dev/null
+# Add a record to the raw zone on the master.
+$NSUPDATE << EOF || ret=1
+zone removedkeys-primary.
+server 10.53.0.3 ${PORT}
+update add bar.removedkeys-primary. 0 A 127.0.0.1
+send
+EOF
+wait_until_raw_zone_update_is_processed "removedkeys-primary"
+# Query for bar.removedkeys-primary/A again and ensure the signer still returns
+# a negative, signed response.
+$DIG $DIGOPTS @10.53.0.3 bar.removedkeys-primary. A > dig.out.ns3.post.test$n 2>&1
+grep "status: NOERROR" dig.out.ns3.post.test$n > /dev/null && ret=1
+grep "RRSIG" dig.out.ns3.pre.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking that backlogged changes to raw zone are applied after keys become available (primary) ($n)"
+ret=0
+# Restore the signing keys for this zone.
+mv ns3/removedkeys/Kremovedkeys-primary* ns3
+$RNDCCMD 10.53.0.3 loadkeys removedkeys-primary > /dev/null 2>&1
+# Determine what a SOA record with a bumped serial number should look like.
+BUMPED_SOA=`sed -n 's/.*\(add removedkeys-primary.*IN.*SOA\)/\1/p;' ns3/named.run | tail -1 | awk '{$8 += 1; print $0}'`
+# Ensure the wait_until_raw_zone_update_is_processed() call below will ignore
+# log messages generated before the raw zone is updated.
+nextpart ns3/named.run > /dev/null
+# Bump the SOA serial number of the raw zone.
+$NSUPDATE << EOF || ret=1
+zone removedkeys-primary.
+server 10.53.0.3 ${PORT}
+update del removedkeys-primary. SOA
+update ${BUMPED_SOA}
+send
+EOF
+wait_until_raw_zone_update_is_processed "removedkeys-primary"
+# Query for bar.removedkeys-primary/A again and ensure the signer now returns a
+# positive, signed response.
+$DIG $DIGOPTS @10.53.0.3 bar.removedkeys-primary. A > dig.out.ns3.test$n 2>&1
+grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+grep "RRSIG" dig.out.ns3.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking that changes to raw zone are not applied to a previously signed secure zone with no keys available (secondary) ($n)"
+ret=0
+# Query for bar.removedkeys-secondary/A and ensure the response is negative. As this
+# zone does have signing keys set up, the response must be signed.
+$DIG $DIGOPTS @10.53.0.3 bar.removedkeys-secondary. A > dig.out.ns3.pre.test$n 2>&1 || ret=1
+grep "status: NOERROR" dig.out.ns3.pre.test$n > /dev/null && ret=1
+grep "RRSIG" dig.out.ns3.pre.test$n > /dev/null || ret=1
+# Remove the signing keys for this zone.
+mv -f ns3/Kremovedkeys-secondary* ns3/removedkeys
+# Ensure the wait_until_raw_zone_update_is_processed() call below will ignore
+# log messages generated before the raw zone is updated.
+nextpart ns3/named.run > /dev/null
+# Add a record to the raw zone on the master.
+$NSUPDATE << EOF || ret=1
+zone removedkeys-secondary.
+server 10.53.0.2 ${PORT}
+update add bar.removedkeys-secondary. 0 A 127.0.0.1
+send
+EOF
+wait_until_raw_zone_update_is_processed "removedkeys-secondary"
+# Query for bar.removedkeys-secondary/A again and ensure the signer still returns a
+# negative, signed response.
+$DIG $DIGOPTS @10.53.0.3 bar.removedkeys-secondary. A > dig.out.ns3.post.test$n 2>&1
+grep "status: NOERROR" dig.out.ns3.post.test$n > /dev/null && ret=1
+grep "RRSIG" dig.out.ns3.pre.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "checking that backlogged changes to raw zone are applied after keys become available (secondary) ($n)"
+ret=0
+# Restore the signing keys for this zone.
+mv ns3/removedkeys/Kremovedkeys-secondary* ns3
+$RNDCCMD 10.53.0.3 loadkeys removedkeys-secondary > /dev/null 2>&1
+# Determine what a SOA record with a bumped serial number should look like.
+BUMPED_SOA=`sed -n 's/.*\(add removedkeys-secondary.*IN.*SOA\)/\1/p;' ns2/named.run | tail -1 | awk '{$8 += 1; print $0}'`
+# Ensure the wait_until_raw_zone_update_is_processed() call below will ignore
+# log messages generated before the raw zone is updated.
+nextpart ns3/named.run > /dev/null
+# Bump the SOA serial number of the raw zone on the master.
+$NSUPDATE << EOF || ret=1
+zone removedkeys-secondary.
+server 10.53.0.2 ${PORT}
+update del removedkeys-secondary. SOA
+update ${BUMPED_SOA}
+send
+EOF
+wait_until_raw_zone_update_is_processed "removedkeys-secondary"
+# Query for bar.removedkeys-secondary/A again and ensure the signer now returns
+# a positive, signed response.
+$DIG $DIGOPTS @10.53.0.3 bar.removedkeys-secondary. A > dig.out.ns3.test$n 2>&1
+grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+grep "RRSIG" dig.out.ns3.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+# Check that the master file $2 for zone $1 does not contain RRSIG records
+# while the journal file for that zone does contain them.
+ensure_sigs_only_in_journal() {
+ origin="$1"
+ masterfile="$2"
+ $CHECKZONE -i none -f raw -D -o - "$origin" "$masterfile" 2>&1 | grep -w RRSIG > /dev/null && ret=1
+ $CHECKZONE -j -i none -f raw -D -o - "$origin" "$masterfile" 2>&1 | grep -w RRSIG > /dev/null || ret=1
+}
+
+n=`expr $n + 1`
+echo_i "checking that records added from a journal are scheduled to be resigned ($n)"
+ret=0
+# Signing keys for the "delayedkeys" zone are not yet accessible. Thus, the
+# zone file for the signed version of the zone will contain no DNSSEC records.
+# Move keys into place now and load them, which will cause DNSSEC records to
+# only be present in the journal for the signed version of the zone.
+mv Kdelayedkeys* ns3/
+$RNDCCMD 10.53.0.3 loadkeys delayedkeys > rndc.out.ns3.pre.test$n 2>&1 || ret=1
+# Wait until the zone is signed.
+ans=1
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+ $RNDCCMD 10.53.0.3 signing -list delayedkeys > signing.out.test$n 2>&1
+ num=`grep "Done signing with" signing.out.test$n | wc -l`
+ if [ $num -eq 2 ]; then
+ ans=0
+ break
+ fi
+ sleep 1
+done
+if [ $ans != 0 ]; then ret=1; fi
+# Halt rather than stopping the server to prevent the master file from being
+# flushed upon shutdown since we specifically want to avoid it.
+$PERL $SYSTEMTESTTOP/stop.pl --use-rndc --halt --port ${CONTROLPORT} . ns3
+ensure_sigs_only_in_journal delayedkeys ns3/delayedkeys.db.signed
+$PERL $SYSTEMTESTTOP/start.pl --noclean --restart --port ${PORT} . ns3
+# At this point, the raw zone journal will not have a source serial set. Upon
+# server startup, receive_secure_serial() will rectify that, update SOA, resign
+# it, and schedule its future resign. This will cause "rndc zonestatus" to
+# return delayedkeys/SOA as the next node to resign, so we restart the server
+# once again; with the raw zone journal now having a source serial set,
+# receive_secure_serial() should refrain from introducing any zone changes.
+$PERL $SYSTEMTESTTOP/stop.pl --use-rndc --halt --port ${CONTROLPORT} . ns3
+ensure_sigs_only_in_journal delayedkeys ns3/delayedkeys.db.signed
+$PERL $SYSTEMTESTTOP/start.pl --noclean --restart --port ${PORT} . ns3
+# We can now test whether the secure zone journal was correctly processed:
+# unless the records contained in it were scheduled for resigning, no resigning
+# event will be scheduled at all since the secure zone master file contains no
+# DNSSEC records.
+$RNDCCMD 10.53.0.3 zonestatus delayedkeys > rndc.out.ns3.post.test$n 2>&1 || ret=1
+grep "next resign node:" rndc.out.ns3.post.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+n=`expr $n + 1`
+
+echo_i "check that zonestatus reports 'type: master' for a inline master zone ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 zonestatus master > rndc.out.ns3.test$n
+grep "type: master" rndc.out.ns3.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+n=`expr $n + 1`
+echo_i "check that zonestatus reports 'type: slave' for a inline slave zone ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 zonestatus bits > rndc.out.ns3.test$n
+grep "type: slave" rndc.out.ns3.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=`expr $status + $ret`
+
+echo_i "exit status: $status"
+[ $status -eq 0 ] || exit 1
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 21:32:46 +0000