Adding debian version 4.92-8+deb10u6.debian/4.92-8+deb10u6

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

2 files changed, 623 insertions, 0 deletions

diff --git a/debian/debconf/update-exim4.conf b/debian/debconf/update-exim4.conf
new file mode 100644
index 0000000..084af7f
--- /dev/null
+++ b/debian/debconf/update-exim4.conf
@@ -0,0 +1,484 @@
+#!/bin/sh
+# update-exim4.conf(8) - Generate /var/lib/exim4/config.autogenerated
+
+set -e
+set -C
+set -f
+
+UPEX4C_confdir="/etc/exim4"
+UPEX4C_sections="main acl router transport retry rewrite auth"
+
+# list of ue4cc options that need to support both colons and
+# semicolons as separators. dc_other_hostnames and dc_smarthost
+# has special handling.
+UPEX4C_semicolon="dc_local_interfaces dc_relay_nets dc_relay_domains"
+EXIM="/usr/sbin/exim4"
+
+UPEX4C_verbose=no
+UPEX4C_autoconfigfile=/var/lib/exim4/config.autogenerated
+UPEX4C_outputfile="${UPEX4C_autoconfigfile}"
+UPEX4C_version=""
+
+usage() {
+cat <<EOF
+$0 - Generate exim4 configuration files
+       Options:
+       -v|--verbose - Enable verbose mode, tell about ignored files
+       -h|--help - Show this message
+       --keepcomments - Do not remove comment lines
+       --removecomments - Remove comment lines
+       -o|--output file - write output to file instead of ${UPEX4C_outputfile}
+       -d|--confdir directory - read input from given directory instead of ${UPEX4C_confdir}
+       --check - Test generated file for validity and remove it again.
+EOF
+}
+
+## Parse commandline
+TEMP=$(getopt -n update-exim4.conf \
+	-l check,keepcomments,removecomments,output:,confdir:,help,verbose -- \
+	+o:d:vh "$@")
+
+if test "$?" != 0; then
+	echo "Terminating..." >&2
+	exit 1
+fi
+
+eval set -- ${TEMP}
+while test "$1" != "--"; do
+	case $1 in
+		-h|--help)
+			usage
+			exit 0
+		;;
+		-v|--verbose)
+			UPEX4C_verbose=yes
+		;;
+		--keepcomments)
+			UPEX4C_comments=yes
+		;;
+		--removecomments)
+			UPEX4C_comments=no
+		;;
+		--check)
+			UPEX4C_check=yes
+		;;
+		-o|--output)
+			shift
+			UPEX4C_outputfile="$1"
+		;;
+		-d|--confdir)
+			shift
+			UPEX4C_confdir="$1"
+		;;
+	esac
+	shift
+done
+shift
+
+# No non-option arguments allowed.
+if [ "$#" -ne 0 ]; then
+	echo "No non option arguments ($@) allowed" >&2
+	usage >&2
+	exit 1
+fi
+
+# exit immediately if /etc/exim4/exim4.conf exists and -o was not specified
+if [ -e /etc/exim4/exim4.conf ] && \
+  [ "${UPEX4C_outputfile}" = "${UPEX4C_autoconfigfile}" ] ; then
+  exit 0
+fi
+
+UE4CC="$UPEX4C_confdir/update-exim4.conf.conf"
+UPEX4C_confd="$UPEX4C_confdir/conf.d"
+
+[ -d "$(dirname "$UPEX4C_outputfile")" ] || \
+{ printf "$0: Error, missing $(dirname "$UPEX4C_outputfile"), exiting.\n" 1>&2 ; exit 1 ; }
+
+if [ -f "$UE4CC" ]; then
+  . "$UE4CC"
+else
+  echo >&2 "$0: Error, no $UE4CC, exiting."
+  exit 1
+fi
+
+
+UPEX4C_autoconfigfile=/var/lib/exim4/config.autogenerated
+if [ "$(dirname ${UPEX4C_outputfile})" = "/var/lib/exim4" ] ; then
+	UPEX4C_tmp="${UPEX4C_outputfile}.tmp"
+else
+	UPEX4C_tmp="$(tempfile -m600 -p ex4)"
+fi
+
+lowerpipe() {
+  tr 'A-Z' 'a-z'
+}
+
+lowercase() {
+  echo "$*" | lowerpipe
+}
+
+check_ascii_pipe() {
+  IN="$(cat)"
+  # Use "abcdef... instead of a a-z or [:alnum:] here since the alternatives
+  # will also match non-ascii characters.
+  OUT="$(echo $IN | sed 's/[^-0-9ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz\/\.!*@_~:;< \[\]]/_/g')"
+  if [ "$OUT" != "$IN" ]; then
+    echo >&2 "$0: non-ascii value $IN read from $UE4CC, sanitizing to $OUT"
+  fi
+  echo $OUT
+}
+
+[ "${CFILEMODE}" = "" ] && CFILEMODE=644
+[ "${dc_use_split_config}" = "" ] && dc_use_split_config='false'
+[ "${dc_localdelivery}" = "" ] && dc_localdelivery='mail_spool'
+[ "${UPEX4C_comments:-}" = "" ] && UPEX4C_comments="${ue4c_keepcomments:-no}"
+
+TEMPLATEFILE="${UPEX4C_confdir}/exim4.conf.template"
+
+dc_use_split_config="$(lowercase $dc_use_split_config)"
+UPEX4C_verbose="$(lowercase $UPEX4C_verbose)"
+
+if [ "${dc_use_split_config}" = "true" ]; then
+  [ "${UPEX4C_verbose}" = "yes" ] && \
+	echo "using split configuration scheme from ${UPEX4C_confd}"
+  if ! [ -d "${UPEX4C_confd}" ]; then
+    printf >&2 "$0: Error, no ${UPEX4C_confd}, exiting.\n"
+    exit 1
+  fi
+else
+  [ "${UPEX4C_verbose}" = "yes" ] && \
+	echo "using non-split configuration scheme from ${TEMPLATEFILE}"
+fi
+
+# take only the first word from /etc/mailname
+mailname="$(< /etc/mailname sed -n 's/\([-[:alnum:]@\.]\+\).*/\1/;p;q' | lowerpipe | check_ascii_pipe)"
+
+# barf if lookups are found. They have never been supported here.
+if echo " ${dc_other_hostnames} ${dc_smarthost} ${dc_local_interfaces} ${dc_relay_nets} ${dc_relay_domains}"| grep -q '[[:space:]]\(partial-\)\?\(cdb\|dbm\|dbmnz\|\(d\|ipl\|\(n\?wild\)\?l\)search\|nis\)\([\*@]\)\?[[:space:]]*;'; then
+  echo >&2 "WARNING: using 'lookup;' constructs in $UE4CC has never been supported! See /usr/share/doc/exim4-config/NEWS.Debian.gz for details."
+fi
+
+dc_other_hostnames="$(lowercase $dc_other_hostnames | check_ascii_pipe)"
+# add localhost, get rid of spaces, trailing (semi)colons and make the list
+# colon separated
+local_domains="$(echo @:localhost:"${dc_other_hostnames}" | \
+	sed -e 's/[;: ]*$//' -e 's/ *//' -e 's/;/:/g')"
+
+
+# run-parts emulation, stolen from Branden's /etc/X11/Xsession
+# Addition: Use file.rul instead if file if it exists.
+run_parts () {
+	# reset LC_COLLATE
+	unset LANG LC_COLLATE LC_ALL
+
+	if [ -z "$1" ]; then
+		errormessage "$0: internal run_parts called without an argument"
+	fi
+	if [ ! -d "$1" ]; then
+		errormessage "$0: internal run_parts called, but $1 does not exist or is not a directory."
+	fi
+	for F in $(ls $1); do
+		if expr "$F" : '[[:alnum:]_-]\+$' > /dev/null 2>&1; then
+			if [ -f "$1/$F" ] ; then
+				if [ -f "$1/${F}.rul" ] ; then
+					echo "$1/${F}.rul"
+				else
+					echo "$1/$F"
+				fi
+			fi
+		else
+			if [ "${UPEX4C_verbose}" = "yes" ] && \
+				[ -f "$1/$F" ] && \
+				! expr "$F" : '[[:alnum:]_-]\+\.rul'> /dev/null 2>&1 ; then
+				echo \
+				"internal run-parts: ignoring file: $1/$F" 1>&2
+			fi
+		fi
+	done;
+}
+# also from Branden
+errormessage () {
+	# pretty-print messages of arbitrary length (no trailing newline)
+	echo "$*" | fold -s -w ${COLUMNS:-80} >&2;
+}
+
+cat_parts() {
+       if [ -z "$1" ]; then
+               errormessage "$0: internal cat_parts called without an argument"
+       fi
+       if [ ! -d "$1" ]; then
+               errormessage "$0: internal cat_parts called, but $1 does not exist or is not a directory."
+       fi
+       for file in $(run_parts $1); do
+               echo "#####################################################"
+               echo "### $file"
+               echo "#####################################################"
+               cat "$file"
+	       echo
+               echo "#####################################################"
+               echo "### end $file"
+               echo "#####################################################"
+       done
+}
+
+gentmpconf() {
+	rm -f "${UPEX4C_tmp}"
+	touch "${UPEX4C_tmp}"
+	# this can be removed by the end of 2007
+	#chown --reference=${TEMPLATEFILE} \
+	#	${UPEX4C_tmp} ${UPEX4C_outputfile}
+	#chmod --reference=${TEMPLATEFILE} \
+	#		${UPEX4C_tmp} ${UPEX4C_outputfile}
+	if [ "$(id -u)" = "0" ]; then 
+		chown root:Debian-exim "${UPEX4C_tmp}"
+		[ -e "${UPEX4C_outputfile}" ] && \
+		chown root:Debian-exim "${UPEX4C_outputfile}"
+	fi
+	chmod 640 "${UPEX4C_tmp}"
+	if [ -e "${UPEX4C_outputfile}" ]; then
+	  chmod 640 "${UPEX4C_outputfile}"
+	fi
+}
+
+removecomments(){
+	if [ "${UPEX4C_comments}" = "no" ] ; then
+		grep -E -v '^[[:space:]]*#' | sed -e '/^$/N;/\n$/D' ;
+	else
+		cat
+	fi
+}
+
+gentmpconf
+
+cat << EOF >> "${UPEX4C_tmp}"
+#########
+# WARNING WARNING WARNING
+# WARNING WARNING WARNING
+# WARNING WARNING WARNING
+# WARNING WARNING WARNING
+# WARNING WARNING WARNING
+# This file was generated dynamically from
+EOF
+
+if [ "${dc_use_split_config}" = "true" ] ; then
+cat << EOF >> "${UPEX4C_tmp}"
+# split config files in the $UPEX4C_confd/ directory.
+EOF
+else
+cat << EOF >> "${UPEX4C_tmp}"
+# non-split config ($UPEX4C_confdir/exim4.conf.localmacros
+# and $UPEX4C_confdir/exim4.conf.template).
+EOF
+fi
+
+cat << EOF >> "${UPEX4C_tmp}"
+# The config files are supplemented with package installation/configuration
+# settings managed by debconf. This data is stored in
+# $UPEX4C_confdir/update-exim4.conf.conf
+# Any changes you make here will be lost.
+# See /usr/share/doc/exim4-base/README.Debian.gz and update-exim4.conf(8)
+# for instructions of customization.
+# WARNING WARNING WARNING
+# WARNING WARNING WARNING
+# WARNING WARNING WARNING
+# WARNING WARNING WARNING
+# WARNING WARNING WARNING
+#########
+EOF
+
+# handle ";" in input values as separator change
+
+for field in $UPEX4C_semicolon; do
+  if eval echo \$$field | grep -q ";"; then
+    eval temp=\$$field
+    if ! echo $temp | grep -q "^<"; then
+      temp="<; $temp"
+      eval "$field='$temp'"
+    fi
+  fi
+done
+
+# fix up smarthost line: change semicolons into single colons
+dc_smarthost="$(lowercase $dc_smarthost | check_ascii_pipe | sed 's/;/:/g')"
+
+dc_relay_nets="$(lowercase $dc_relay_nets | check_ascii_pipe)"
+
+if echo "$dc_relay_nets" | grep -q '^<;'; then
+  dc_relay_nets="$dc_relay_nets ; 127.0.0.1 ; ::1"
+else
+  dc_relay_nets="$dc_relay_nets : 127.0.0.1 : ::::1"
+fi
+
+dc_eximconfig_configtype="$(lowercase $dc_eximconfig_configtype | check_ascii_pipe)"
+dc_hide_mailname="$(lowercase $dc_hide_mailname | check_ascii_pipe)"
+dc_readhost="$(lowercase $dc_readhost | check_ascii_pipe)"
+case "$dc_eximconfig_configtype" in
+	satellite|smarthost)
+        if [ "${dc_hide_mailname}" = "true" ] && [ -n "${dc_readhost}" ] ; then
+		hide_mailname=1
+	fi
+	;;
+	local)
+	;;
+	internet)
+	;;
+	none|*)
+                if [ "${dc_use_split_config}" = "true" ] ; then
+                        for i in ${UPEX4C_sections} ; do
+                                cat_parts "${UPEX4C_confd}/$i"
+                        done | \
+                        removecomments \
+			>> "${UPEX4C_tmp}"
+                else
+			LOCALMACROS=""
+			if [ -e "/etc/exim4/exim4.conf.localmacros" ]; then
+			  LOCALMACROS="/etc/exim4/exim4.conf.localmacros"
+			fi
+                        cat "${LOCALMACROS:-/dev/null}" "${TEMPLATEFILE:-/dev/null}" | \
+                        removecomments \
+                                >> "${UPEX4C_tmp}"
+                fi
+		mv -f "${UPEX4C_tmp}" "${UPEX4C_outputfile}"
+		chmod "${CFILEMODE}" "${UPEX4C_outputfile}"
+		[ "${UPEX4C_verbose}" = "yes" ] && \
+			echo "Not substituting variables since conftype is none (or other)"
+		exit 0
+	;;
+esac
+
+UPEX4C_macros="##############################################\n"
+UPEX4C_macros="${UPEX4C_macros}# the following macro definitions were created\n"
+UPEX4C_macros="${UPEX4C_macros}# dynamically by $0\n"
+
+preprocess_macro() {
+  macroname="${1:-}"
+  shift
+  contents="$(lowercase ${@} | check_ascii_pipe)"
+  printf "%s" ".ifndef $macroname\n$macroname=$contents\n.endif\n"
+}
+
+seed_macro() {
+  UPEX4C_macros="${UPEX4C_macros}$(preprocess_macro "$1" "$2")"
+}
+
+file2macros() {
+  file="$1"
+  < $1 \
+    sed -n '/^[[:upper:]]/p;' | \
+    grep -v '^CFILEMODE=' | \
+    while read line; do
+      errormessage "undocumented line $line found in $1, generating exim macro"
+      left="$(echo $line | sed 's/\([^=]*\).*/\1/')"
+      right="$(echo $line | sed 's/[^=]*=\(.*\)/\1/')"
+      preprocess_macro "$left" "$right"
+    done
+}
+
+if [ "${dc_local_interfaces}" != "" ] ; then
+	seed_macro "MAIN_LOCAL_INTERFACES" "${dc_local_interfaces}"
+fi
+
+if [ "${dc_minimaldns}" = "true" ] ; then
+	seed_macro "DC_minimaldns" "1"
+	if guessed_name="$(hostname --fqdn | lowerpipe | check_ascii_pipe | grep '\.')" ; then
+		seed_macro "MAIN_HARDCODE_PRIMARY_HOSTNAME" "$guessed_name"
+	else
+		errormessage "hostname --fqdn did not return a fully qualified name, dc_minimaldns will not work. Please fix your /etc/hosts setup."
+	fi
+fi
+
+if [ -n "${hide_mailname:-}" ]; then
+  seed_macro "HIDE_MAILNAME" "${hide_mailname:-}"
+fi
+seed_macro "MAIN_PACKAGE_VERSION" "$UPEX4C_version"
+seed_macro "MAIN_LOCAL_DOMAINS" "${local_domains}"
+seed_macro "MAIN_RELAY_TO_DOMAINS" "${dc_relay_domains}"
+seed_macro "ETC_MAILNAME" "$mailname"
+seed_macro "LOCAL_DELIVERY" "${dc_localdelivery}"
+seed_macro "MAIN_RELAY_NETS" "${dc_relay_nets}"
+seed_macro "DCreadhost" "${dc_readhost}"
+seed_macro "DCsmarthost" "${dc_smarthost}"
+seed_macro "DC_eximconfig_configtype" "${dc_eximconfig_configtype}"
+seed_macro "DCconfig_${dc_eximconfig_configtype}" "1"
+
+# dump everything starting with a capital into macros as well
+# this is going to stay undocumented, but fixes PEBCAK where people write
+# macros into ue4cc.
+
+UPEX4C_macros="${UPEX4C_macros}$(file2macros $UE4CC)"
+
+UPEX4C_macros="${UPEX4C_macros}##############################################\n"
+
+case "${dc_use_split_config}" in
+true)
+	for i in ${UPEX4C_sections} ; do
+		echo "# begin processing $i #####"
+		cat_parts "${UPEX4C_confd}/$i"
+		echo "# end of $i  #####"
+	done \
+	| removecomments \
+	| sed "s|^\(UPEX4CmacrosUPEX4C.*\)$|\1\n$UPEX4C_macros|" \
+	>> "${UPEX4C_tmp}"
+	RELEVANTTEMPLATE="$UPEX4C_confd"
+;;
+false)
+	if [ ! -r "$TEMPLATEFILE" ] ; then
+		echo "Error: Unsplit config selected and $TEMPLATEFILE missing ... exiting" 1>&2
+		exit 1
+	fi
+	LOCALMACROS=""
+	if [ -e "/etc/exim4/exim4.conf.localmacros" ]; then
+		LOCALMACROS="${UPEX4C_confdir}/exim4.conf.localmacros"
+	fi
+	cat "${LOCALMACROS:-/dev/null}" "${TEMPLATEFILE:-/dev/null}" \
+	| removecomments \
+	| sed "s|^\(UPEX4CmacrosUPEX4C.*\)$|\1\n$UPEX4C_macros|" \
+ 	>> "${UPEX4C_tmp}"
+	RELEVANTTEMPLATE="$TEMPLATEFILE"
+;;
+*)
+	errormessage "Invalid value for dc_use_split_config: \"${dc_use_split_config}\", exiting."
+	rm -f "${UPEX4C_tmp}"
+	exit 1
+;;
+esac
+
+# check for left-over DEBCONF strings that may cause installation trouble
+# (fix PEBCAK for people who don't accept conffile changes and don't
+# read docs)
+if grep -qr '^[^#]*DEBCONF[[:lower:]_]\+DEBCONF' $RELEVANTTEMPLATE \
+   && ! grep -qr '^[[:space:]]*DEBCONFstringOK_config_adapted[[:space:]]*=' $RELEVANTTEMPLATE; then
+  errormessage "DEBCONFsomethingDEBCONF found in exim configuration. This is most probably caused by you upgrading to exim4 4.67-3 or later without accepting the suggested conffile changes. Please read /usr/share/doc/exim4-config/NEWS.Debian.gz for 4.67-2 and 4.67-4"
+fi
+
+# check for left-over UPEX4CmacrosUPEX4C comment string that may cause
+# installation trouble (fix PEBCAK for people who don't accept conffile
+# changes and don't read docs)
+if grep -qr '# UPEX4CmacrosUPEX4C' $RELEVANTTEMPLATE \
+   && ! grep -qr '^[[:space:]]*UPEX4CmacrosOK_config_adapted[[:space:]]*=' $RELEVANTTEMPLATE; then
+  errormessage "UPEX4CmacrosUPEX4C found in an exim configuration comment. This is most probably caused by you upgrading to exim4 4.67-5 or later without accepting the suggested conffile changes. Please read /usr/share/doc/exim4-config/NEWS.Debian.gz for 4.67-5"
+fi
+
+
+# test validity if called without -o or if --check was supplied
+if [ "${UPEX4C_outputfile}" = "${UPEX4C_autoconfigfile}" ] || \
+	[ "x${UPEX4C_check}" = "xyes" ]; then
+	if [ -x "${EXIM}" ] ; then
+		if ! "${EXIM}" -C "${UPEX4C_tmp}" -bV > /dev/null ; then
+			# we have an error in the configuration file. Do not install
+			# and activate. However, errors in string expansions inside
+			# the configuration file are not detected by this check!
+			errormessage "Invalid new configfile ${UPEX4C_tmp}, not installing ${UPEX4C_tmp} to ${UPEX4C_outputfile}"
+			exit 1
+		fi
+	fi
+fi
+if [ "x${UPEX4C_check}" = "xyes" ]; then
+	rm -f "${UPEX4C_tmp}"
+	exit 0
+fi
+
+mv -f "${UPEX4C_tmp}" "${UPEX4C_outputfile}"
+chmod "${CFILEMODE}" "${UPEX4C_outputfile}"
+
+# end of file
diff --git a/debian/debconf/update-exim4.conf.template b/debian/debconf/update-exim4.conf.template
new file mode 100755
index 0000000..6255dda
--- /dev/null
+++ b/debian/debconf/update-exim4.conf.template
@@ -0,0 +1,139 @@
+#!/bin/bash
+
+set -e
+
+CONFDIR="${CONFDIR:-/etc/exim4}"
+DONOTRUN='true'
+
+UPEX4CT_outputfile="${CONFDIR}/exim4.conf.template"
+
+usage() {
+cat <<EOF
+$0 - Generate exim4 configuration file template
+       Options:
+       -n|--nobackup - Overwrite old template, do not take backup.
+       -o|--output file - write output to file instead of ${UPEX4CT_outputfile}
+       -h|--help - This message.
+       -r|--run - Actually do something
+EOF
+}
+
+## Parse commandline
+TEMP=$(getopt -n update-exim4.conf.template \
+	-l nobackup,output:,help,run -- \
+	+no:hr "$@")
+
+if test "$?" != 0; then
+	echo "Terminating..." >&2
+	exit 1
+fi
+
+eval set -- ${TEMP}
+while test "$1" != "--"; do
+	case $1 in
+		-h|--help)
+			usage
+			exit 0
+		;;
+		-o|--output)
+			shift
+			UPEX4CT_outputfile="$1"
+		;;
+		-n|--nobackup)
+			NOBACKUP=1
+		;;
+		-r|--run)
+			DONOTRUN='false'
+		;;
+	esac
+	shift
+done
+shift
+
+# No non-option arguments allowed.
+if [ "$#" -ne 0 ]; then
+	echo "No non option arguments ($@) allowed" >&2
+	usage >&2
+	exit 1
+fi
+
+# run-parts emulation, stolen from Branden's /etc/X11/Xsession
+# Addition: Use file.rul instead if file if it exists.
+run_parts () {
+	# reset LC_COLLATE
+	unset LANG LC_COLLATE LC_ALL
+
+	if [ -z "$1" ]; then
+		errormessage "$0: internal run_parts called without an argument"
+	fi
+	if [ ! -d "$1" ]; then
+		errormessage "$0: internal run_parts called, but $1 does not exist or is not a directory."
+	fi
+  	for F in $(ls $1 | grep -v /.svn); do
+		if expr "$F" : '[[:alnum:]_-]\+$' > /dev/null 2>&1; then
+			if [ -f "$1/$F" ] ; then
+				if [ -f "$1/${F}.rul" ] ; then
+					echo "$1/${F}.rul"
+				else
+					echo "$1/$F"
+				fi
+			fi
+		fi
+	done;
+}
+# also from Branden
+errormessage () {
+	# pretty-print messages of arbitrary length (no trailing newline)
+	echo "$*" | fold -s -w ${COLUMNS:-80} >&2;
+}
+
+cat_parts() {
+       if [ -z "$1" ]; then
+               errormessage "$0: internal cat_parts called without an argument"
+       fi
+       if [ ! -d "$1" ]; then
+               errormessage "$0: internal cat_parts called, but $1 does not exist or is not a directory."
+       fi
+       for file in $(run_parts $1); do
+               echo "#####################################################"
+               echo "### $file"
+               echo "#####################################################"
+               cat $file
+               echo "#####################################################"
+               echo "### end $file"
+               echo "#####################################################"
+       done
+}
+
+if [ "$DONOTRUN" = "true" ]; then
+	errormessage "This program overwrites conffiles. Do not run unless you have consulted the manpage." >&2
+	echo "Terminating..." >&2
+	exit 1
+fi
+
+
+if [ -e "${UPEX4CT_outputfile}" ] && [ -z "$NOBACKUP" ]; then
+  if [ -e "${UPEX4CT_outputfile}.bak.$$" ]; then
+    echo >&2 "ERR: ${UPEX4CT_outputfile}.bak.$$ already exists, aborting"
+    exit 1
+  fi
+fi
+ 
+NEWTEMPLATE=$(tempfile -m644 -p ex4)
+if [ -f "${UPEX4CT_outputfile}" ] ; then
+	chmod --reference="${UPEX4CT_outputfile}" "$NEWTEMPLATE"
+fi
+
+# generate .template. Ugly - better alternative?
+SAVEWD="$(pwd)"
+cd ${CONFDIR}/conf.d
+for i in main acl router transport retry rewrite auth ; do
+  cat_parts $i
+done > "$NEWTEMPLATE"
+cd "$SAVEWD"
+
+if [ -e "${UPEX4CT_outputfile}" ] && [ -z "$NOBACKUP" ] ; then
+	mv "${UPEX4CT_outputfile}" \
+		"${UPEX4CT_outputfile}.bak.$$"
+fi
+mv "$NEWTEMPLATE" "${UPEX4CT_outputfile}"