# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: pkg-exim4-maintainers@lists.alioth.debian.org\n"
"POT-Creation-Date: 2007-07-18 08:29+0200\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: 8bit\n"

#. Type: boolean
#. Description
#: ../exim4-base.templates:1001
msgid "Remove undelivered messages in spool directory?"
msgstr ""

#. Type: boolean
#. Description
#: ../exim4-base.templates:1001
msgid ""
"There are e-mail messages in the Exim spool directory /var/spool/exim4/"
"input/ which have not yet been delivered. Removing Exim will cause them to "
"remain undelivered until Exim is re-installed."
msgstr ""

#. Type: boolean
#. Description
#: ../exim4-base.templates:1001
msgid ""
"If this option is not chosen, the spool directory is kept, allowing the "
"messages in the queue to be delivered at a later date after Exim is re-"
"installed."
msgstr ""

#. Type: error
#. Description
#: ../exim4-base.templates:2001 ../exim4-daemon-heavy.templates:1001
#: ../exim4-daemon-light.templates:1001 ../exim4.templates:1001
msgid "Reconfigure exim4-config instead of this package"
msgstr ""

#. Type: error
#. Description
#: ../exim4-base.templates:2001 ../exim4-daemon-heavy.templates:1001
#: ../exim4-daemon-light.templates:1001 ../exim4.templates:1001
msgid ""
"Exim4 has its configuration factored out into a dedicated package, exim4-"
"config. To reconfigure Exim4, use 'dpkg-reconfigure exim4-config'."
msgstr ""

#. Type: select
#. Choices
#. Translators beware! the following six strings form a single
#. Choices menu. - Every one of these strings has to fit in a standard
#. 80 characters console, as the fancy screen setup takes up some space
#. try to keep below ~71 characters.
#. DO NOT USE commas (,) in Choices translations otherwise
#. this will break the choices shown to users
#: ../exim4-config.templates:1001
msgid "internet site; mail is sent and received directly using SMTP"
msgstr ""

#. Type: select
#. Choices
#. Translators beware! the following six strings form a single
#. Choices menu. - Every one of these strings has to fit in a standard
#. 80 characters console, as the fancy screen setup takes up some space
#. try to keep below ~71 characters.
#. DO NOT USE commas (,) in Choices translations otherwise
#. this will break the choices shown to users
#: ../exim4-config.templates:1001
msgid "mail sent by smarthost; received via SMTP or fetchmail"
msgstr ""

#. Type: select
#. Choices
#. Translators beware! the following six strings form a single
#. Choices menu. - Every one of these strings has to fit in a standard
#. 80 characters console, as the fancy screen setup takes up some space
#. try to keep below ~71 characters.
#. DO NOT USE commas (,) in Choices translations otherwise
#. this will break the choices shown to users
#: ../exim4-config.templates:1001
msgid "mail sent by smarthost; no local mail"
msgstr ""

#. Type: select
#. Choices
#. Translators beware! the following six strings form a single
#. Choices menu. - Every one of these strings has to fit in a standard
#. 80 characters console, as the fancy screen setup takes up some space
#. try to keep below ~71 characters.
#. DO NOT USE commas (,) in Choices translations otherwise
#. this will break the choices shown to users
#: ../exim4-config.templates:1001
msgid "local delivery only; not on a network"
msgstr ""

#. Type: select
#. Choices
#. Translators beware! the following six strings form a single
#. Choices menu. - Every one of these strings has to fit in a standard
#. 80 characters console, as the fancy screen setup takes up some space
#. try to keep below ~71 characters.
#. DO NOT USE commas (,) in Choices translations otherwise
#. this will break the choices shown to users
#: ../exim4-config.templates:1001
msgid "no configuration at this time"
msgstr ""

#. Type: select
#. Description
#: ../exim4-config.templates:1002
msgid "General type of mail configuration:"
msgstr ""

#. Type: select
#. Description
#: ../exim4-config.templates:1002
msgid ""
"Please select the mail server configuration type that best meets your needs."
msgstr ""

#. Type: select
#. Description
#: ../exim4-config.templates:1002
msgid ""
"Systems with dynamic IP addresses, including dialup systems, should "
"generally be configured to send outgoing mail to another machine, called a "
"'smarthost' for delivery because many receiving systems on the Internet "
"block incoming mail from dynamic IP addresses as spam protection."
msgstr ""

#. Type: select
#. Description
#: ../exim4-config.templates:1002
msgid ""
"A system with a dynamic IP address can receive its own mail, or local "
"delivery can be disabled entirely (except mail for root and postmaster)."
msgstr ""

#. Type: boolean
#. Description
#: ../exim4-config.templates:2001
msgid "Really leave the mail system unconfigured?"
msgstr ""

#. Type: boolean
#. Description
#: ../exim4-config.templates:2001
msgid ""
"Until the mail system is configured, it will be broken and cannot be used. "
"Configuration at a later time can be done either by hand or by running 'dpkg-"
"reconfigure exim4-config' as root."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:3001
msgid "System mail name:"
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:3001
msgid ""
"The 'mail name' is the domain name used to 'qualify' mail addresses without "
"a domain name."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:3001
msgid ""
"This name will also be used by other programs. It should be the single, "
"fully qualified domain name (FQDN)."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:3001
msgid ""
"Thus, if a mail address on the local host is foo@example.org, the correct "
"value for this option would be example.org."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:3001
msgid ""
"This name won't appear on From: lines of outgoing messages if rewriting is "
"enabled."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:4001
msgid "Other destinations for which mail is accepted:"
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:4001
msgid ""
"Please enter a semicolon-separated list of recipient domains for which this "
"machine should consider itself the final destination. These domains are "
"commonly called 'local domains'. The local hostname (${fqdn}) and "
"'localhost' are always added to the list given here."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:4001
msgid ""
"By default all local domains will be treated identically. If both a.example "
"and b.example are local domains, acc@a.example and acc@b.example will be "
"delivered to the same final destination. If different domain names should be "
"treated differently, it is necessary to edit the config files afterwards."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:5001
msgid "Domains to relay mail for:"
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:5001
msgid ""
"Please enter a semicolon-separated list of recipient domains for which this "
"system will relay mail, for example as a fallback MX or mail gateway. This "
"means that this system will accept mail for these domains from anywhere on "
"the Internet and deliver them according to local delivery rules."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:5001
msgid "Do not mention local domains here. Wildcards may be used."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:6001
msgid "Machines to relay mail for:"
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:6001
msgid ""
"Please enter a semicolon-separated list of IP address ranges for which this "
"system will unconditionally relay mail, functioning as a smarthost."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:6001
msgid ""
"You should use the standard address/prefix format (e.g. 194.222.242.0/24 or "
"5f03:1200:836f::/48)."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:6001
msgid ""
"If this system should not be a smarthost for any other host, leave this list "
"blank."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:7001
msgid "Visible domain name for local users:"
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:7001
msgid ""
"The option to hide the local mail name in outgoing mail was enabled. It is "
"therefore necessary to specify the domain name this system should use for "
"the domain part of local users' sender addresses."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:8001
msgid "IP address or host name of the outgoing smarthost:"
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:8001
msgid ""
"Please enter the IP address or the host name of a mail server that this "
"system should use as outgoing smarthost. If the smarthost only accepts your "
"mail on a port different from TCP/25, append two colons and the port number "
"(for example smarthost.example::587 or 192.168.254.254::2525). Colons in "
"IPv6 addresses need to be doubled."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:8001
msgid ""
"If the smarthost requires authentication, please refer to the Debian-"
"specific README files in /usr/share/doc/exim4-base for notes about setting "
"up SMTP authentication."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:9001
msgid "Root and postmaster mail recipient:"
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:9001
msgid ""
"Mail for the 'postmaster', 'root', and other system accounts needs to be "
"redirected to the user account of the actual system administrator."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:9001
msgid ""
"If this value is left empty, such mail will be saved in /var/mail/mail, "
"which is not recommended."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:9001
msgid ""
"Note that postmaster's mail should be read on the system to which it is "
"directed, rather than being forwarded elsewhere, so (at least one of) the "
"users listed here should not redirect their mail off this machine. A 'real-' "
"prefix can be used to force local delivery."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:9001
msgid "Multiple user names need to be separated by spaces."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:10001
msgid "IP-addresses to listen on for incoming SMTP connections:"
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:10001
msgid ""
"Please enter a semicolon-separated list of IP addresses. The Exim SMTP "
"listener daemon will listen on all IP addresses listed here."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:10001
msgid ""
"An empty value will cause Exim to listen for connections on all available "
"network interfaces."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:10001
msgid ""
"If this system only receives mail directly from local services (and not from "
"other hosts), it is suggested to prohibit external connections to the local "
"Exim daemon. Such services include e-mail programs (MUAs) which talk to "
"localhost only as well as fetchmail. External connections are impossible "
"when 127.0.0.1 is entered here, as this will disable listening on public "
"network interfaces."
msgstr ""

#. Type: boolean
#. Description
#: ../exim4-config.templates:11001
msgid "Keep number of DNS-queries minimal (Dial-on-Demand)?"
msgstr ""

#. Type: boolean
#. Description
#: ../exim4-config.templates:11001
msgid ""
"In normal mode of operation Exim does DNS lookups at startup, and when "
"receiving or delivering messages. This is for logging purposes and allows "
"keeping down the number of hard-coded values in the configuration."
msgstr ""

#. Type: boolean
#. Description
#: ../exim4-config.templates:11001
msgid ""
"If this system does not have a DNS full service resolver available at all "
"times (for example if its Internet access is a dial-up line using dial-on-"
"demand), this might have unwanted consequences. For example, starting up "
"Exim or running the queue (even with no messages waiting) might trigger a "
"costly dial-up-event."
msgstr ""

#. Type: boolean
#. Description
#: ../exim4-config.templates:11001
msgid ""
"This option should be selected if this system is using Dial-on-Demand. If it "
"has always-on Internet access, this option should be disabled."
msgstr ""

#. Type: title
#. Description
#: ../exim4-config.templates:12001
msgid "Mail Server configuration"
msgstr ""

#. Type: boolean
#. Description
#: ../exim4-config.templates:13001
msgid "Split configuration into small files?"
msgstr ""

#. Type: boolean
#. Description
#: ../exim4-config.templates:13001
msgid ""
"The Debian exim4 packages can either use 'unsplit configuration', a single "
"monolithic file (/etc/exim4/exim4.conf.template) or 'split configuration', "
"where the actual Exim configuration files are built from about 50 smaller "
"files in /etc/exim4/conf.d/."
msgstr ""

#. Type: boolean
#. Description
#: ../exim4-config.templates:13001
msgid ""
"Unsplit configuration is better suited for large modifications and is "
"generally more stable, whereas split configuration offers a comfortable way "
"to make smaller modifications but is more fragile and might break if "
"modified carelessly."
msgstr ""

#. Type: boolean
#. Description
#: ../exim4-config.templates:13001
msgid ""
"A more detailed discussion of split and unsplit configuration can be found "
"in the Debian-specific README files in /usr/share/doc/exim4-base."
msgstr ""

#. Type: boolean
#. Description
#: ../exim4-config.templates:14001
msgid "Hide local mail name in outgoing mail?"
msgstr ""

#. Type: boolean
#. Description
#: ../exim4-config.templates:14001
msgid ""
"The headers of outgoing mail can be rewritten to make it appear to have been "
"generated on a different system. If this option is chosen, '${mailname}', "
"'localhost' and '${dc_other_hostnames}' in From, Reply-To, Sender and Return-"
"Path are rewritten."
msgstr ""

#. Type: select
#. Choices
#: ../exim4-config.templates:15001
msgid "mbox format in /var/mail/"
msgstr ""

#. Type: select
#. Choices
#: ../exim4-config.templates:15001
msgid "Maildir format in home directory"
msgstr ""

#. Type: select
#. Description
#: ../exim4-config.templates:15002
msgid "Delivery method for local mail:"
msgstr ""

#. Type: select
#. Description
#: ../exim4-config.templates:15002
msgid ""
"Exim is able to store locally delivered email in different formats. The most "
"commonly used ones are mbox and Maildir. mbox uses a single file for the "
"complete mail folder stored in /var/mail/. With Maildir format every single "
"message is stored in a separate file in ~/Maildir/."
msgstr ""

#. Type: select
#. Description
#: ../exim4-config.templates:15002
msgid ""
"Please note that most mail tools in Debian expect the local delivery method "
"to be mbox in their default."
msgstr ""