Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 311 insertions, 0 deletions

diff --git a/Documentation/admin-guide/hw-vuln/mds.rst b/Documentation/admin-guide/hw-vuln/mds.rst
new file mode 100644
index 000000000..2d19c9f4c
--- /dev/null
+++ b/Documentation/admin-guide/hw-vuln/mds.rst
@@ -0,0 +1,311 @@
+MDS - Microarchitectural Data Sampling
+======================================
+
+Microarchitectural Data Sampling is a hardware vulnerability which allows
+unprivileged speculative access to data which is available in various CPU
+internal buffers.
+
+Affected processors
+-------------------
+
+This vulnerability affects a wide range of Intel processors. The
+vulnerability is not present on:
+
+   - Processors from AMD, Centaur and other non Intel vendors
+
+   - Older processor models, where the CPU family is < 6
+
+   - Some Atoms (Bonnell, Saltwell, Goldmont, GoldmontPlus)
+
+   - Intel processors which have the ARCH_CAP_MDS_NO bit set in the
+     IA32_ARCH_CAPABILITIES MSR.
+
+Whether a processor is affected or not can be read out from the MDS
+vulnerability file in sysfs. See :ref:`mds_sys_info`.
+
+Not all processors are affected by all variants of MDS, but the mitigation
+is identical for all of them so the kernel treats them as a single
+vulnerability.
+
+Related CVEs
+------------
+
+The following CVE entries are related to the MDS vulnerability:
+
+   ==============  =====  ===================================================
+   CVE-2018-12126  MSBDS  Microarchitectural Store Buffer Data Sampling
+   CVE-2018-12130  MFBDS  Microarchitectural Fill Buffer Data Sampling
+   CVE-2018-12127  MLPDS  Microarchitectural Load Port Data Sampling
+   CVE-2019-11091  MDSUM  Microarchitectural Data Sampling Uncacheable Memory
+   ==============  =====  ===================================================
+
+Problem
+-------
+
+When performing store, load, L1 refill operations, processors write data
+into temporary microarchitectural structures (buffers). The data in the
+buffer can be forwarded to load operations as an optimization.
+
+Under certain conditions, usually a fault/assist caused by a load
+operation, data unrelated to the load memory address can be speculatively
+forwarded from the buffers. Because the load operation causes a fault or
+assist and its result will be discarded, the forwarded data will not cause
+incorrect program execution or state changes. But a malicious operation
+may be able to forward this speculative data to a disclosure gadget which
+allows in turn to infer the value via a cache side channel attack.
+
+Because the buffers are potentially shared between Hyper-Threads cross
+Hyper-Thread attacks are possible.
+
+Deeper technical information is available in the MDS specific x86
+architecture section: :ref:`Documentation/x86/mds.rst <mds>`.
+
+
+Attack scenarios
+----------------
+
+Attacks against the MDS vulnerabilities can be mounted from malicious non
+priviledged user space applications running on hosts or guest. Malicious
+guest OSes can obviously mount attacks as well.
+
+Contrary to other speculation based vulnerabilities the MDS vulnerability
+does not allow the attacker to control the memory target address. As a
+consequence the attacks are purely sampling based, but as demonstrated with
+the TLBleed attack samples can be postprocessed successfully.
+
+Web-Browsers
+^^^^^^^^^^^^
+
+  It's unclear whether attacks through Web-Browsers are possible at
+  all. The exploitation through Java-Script is considered very unlikely,
+  but other widely used web technologies like Webassembly could possibly be
+  abused.
+
+
+.. _mds_sys_info:
+
+MDS system information
+-----------------------
+
+The Linux kernel provides a sysfs interface to enumerate the current MDS
+status of the system: whether the system is vulnerable, and which
+mitigations are active. The relevant sysfs file is:
+
+/sys/devices/system/cpu/vulnerabilities/mds
+
+The possible values in this file are:
+
+  .. list-table::
+
+     * - 'Not affected'
+       - The processor is not vulnerable
+     * - 'Vulnerable'
+       - The processor is vulnerable, but no mitigation enabled
+     * - 'Vulnerable: Clear CPU buffers attempted, no microcode'
+       - The processor is vulnerable but microcode is not updated.
+
+         The mitigation is enabled on a best effort basis. See :ref:`vmwerv`
+     * - 'Mitigation: Clear CPU buffers'
+       - The processor is vulnerable and the CPU buffer clearing mitigation is
+         enabled.
+
+If the processor is vulnerable then the following information is appended
+to the above information:
+
+    ========================  ============================================
+    'SMT vulnerable'          SMT is enabled
+    'SMT mitigated'           SMT is enabled and mitigated
+    'SMT disabled'            SMT is disabled
+    'SMT Host state unknown'  Kernel runs in a VM, Host SMT state unknown
+    ========================  ============================================
+
+.. _vmwerv:
+
+Best effort mitigation mode
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+  If the processor is vulnerable, but the availability of the microcode based
+  mitigation mechanism is not advertised via CPUID the kernel selects a best
+  effort mitigation mode.  This mode invokes the mitigation instructions
+  without a guarantee that they clear the CPU buffers.
+
+  This is done to address virtualization scenarios where the host has the
+  microcode update applied, but the hypervisor is not yet updated to expose
+  the CPUID to the guest. If the host has updated microcode the protection
+  takes effect otherwise a few cpu cycles are wasted pointlessly.
+
+  The state in the mds sysfs file reflects this situation accordingly.
+
+
+Mitigation mechanism
+-------------------------
+
+The kernel detects the affected CPUs and the presence of the microcode
+which is required.
+
+If a CPU is affected and the microcode is available, then the kernel
+enables the mitigation by default. The mitigation can be controlled at boot
+time via a kernel command line option. See
+:ref:`mds_mitigation_control_command_line`.
+
+.. _cpu_buffer_clear:
+
+CPU buffer clearing
+^^^^^^^^^^^^^^^^^^^
+
+  The mitigation for MDS clears the affected CPU buffers on return to user
+  space and when entering a guest.
+
+  If SMT is enabled it also clears the buffers on idle entry when the CPU
+  is only affected by MSBDS and not any other MDS variant, because the
+  other variants cannot be protected against cross Hyper-Thread attacks.
+
+  For CPUs which are only affected by MSBDS the user space, guest and idle
+  transition mitigations are sufficient and SMT is not affected.
+
+.. _virt_mechanism:
+
+Virtualization mitigation
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+  The protection for host to guest transition depends on the L1TF
+  vulnerability of the CPU:
+
+  - CPU is affected by L1TF:
+
+    If the L1D flush mitigation is enabled and up to date microcode is
+    available, the L1D flush mitigation is automatically protecting the
+    guest transition.
+
+    If the L1D flush mitigation is disabled then the MDS mitigation is
+    invoked explicit when the host MDS mitigation is enabled.
+
+    For details on L1TF and virtualization see:
+    :ref:`Documentation/admin-guide/hw-vuln//l1tf.rst <mitigation_control_kvm>`.
+
+  - CPU is not affected by L1TF:
+
+    CPU buffers are flushed before entering the guest when the host MDS
+    mitigation is enabled.
+
+  The resulting MDS protection matrix for the host to guest transition:
+
+  ============ ===== ============= ============ =================
+   L1TF         MDS   VMX-L1FLUSH   Host MDS     MDS-State
+
+   Don't care   No    Don't care    N/A          Not affected
+
+   Yes          Yes   Disabled      Off          Vulnerable
+
+   Yes          Yes   Disabled      Full         Mitigated
+
+   Yes          Yes   Enabled       Don't care   Mitigated
+
+   No           Yes   N/A           Off          Vulnerable
+
+   No           Yes   N/A           Full         Mitigated
+  ============ ===== ============= ============ =================
+
+  This only covers the host to guest transition, i.e. prevents leakage from
+  host to guest, but does not protect the guest internally. Guests need to
+  have their own protections.
+
+.. _xeon_phi:
+
+XEON PHI specific considerations
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+  The XEON PHI processor family is affected by MSBDS which can be exploited
+  cross Hyper-Threads when entering idle states. Some XEON PHI variants allow
+  to use MWAIT in user space (Ring 3) which opens an potential attack vector
+  for malicious user space. The exposure can be disabled on the kernel
+  command line with the 'ring3mwait=disable' command line option.
+
+  XEON PHI is not affected by the other MDS variants and MSBDS is mitigated
+  before the CPU enters a idle state. As XEON PHI is not affected by L1TF
+  either disabling SMT is not required for full protection.
+
+.. _mds_smt_control:
+
+SMT control
+^^^^^^^^^^^
+
+  All MDS variants except MSBDS can be attacked cross Hyper-Threads. That
+  means on CPUs which are affected by MFBDS or MLPDS it is necessary to
+  disable SMT for full protection. These are most of the affected CPUs; the
+  exception is XEON PHI, see :ref:`xeon_phi`.
+
+  Disabling SMT can have a significant performance impact, but the impact
+  depends on the type of workloads.
+
+  See the relevant chapter in the L1TF mitigation documentation for details:
+  :ref:`Documentation/admin-guide/hw-vuln/l1tf.rst <smt_control>`.
+
+
+.. _mds_mitigation_control_command_line:
+
+Mitigation control on the kernel command line
+---------------------------------------------
+
+The kernel command line allows to control the MDS mitigations at boot
+time with the option "mds=". The valid arguments for this option are:
+
+  ============  =============================================================
+  full		If the CPU is vulnerable, enable all available mitigations
+		for the MDS vulnerability, CPU buffer clearing on exit to
+		userspace and when entering a VM. Idle transitions are
+		protected as well if SMT is enabled.
+
+		It does not automatically disable SMT.
+
+  full,nosmt	The same as mds=full, with SMT disabled on vulnerable
+		CPUs.  This is the complete mitigation.
+
+  off		Disables MDS mitigations completely.
+
+  ============  =============================================================
+
+Not specifying this option is equivalent to "mds=full". For processors
+that are affected by both TAA (TSX Asynchronous Abort) and MDS,
+specifying just "mds=off" without an accompanying "tsx_async_abort=off"
+will have no effect as the same mitigation is used for both
+vulnerabilities.
+
+Mitigation selection guide
+--------------------------
+
+1. Trusted userspace
+^^^^^^^^^^^^^^^^^^^^
+
+   If all userspace applications are from a trusted source and do not
+   execute untrusted code which is supplied externally, then the mitigation
+   can be disabled.
+
+
+2. Virtualization with trusted guests
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   The same considerations as above versus trusted user space apply.
+
+3. Virtualization with untrusted guests
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   The protection depends on the state of the L1TF mitigations.
+   See :ref:`virt_mechanism`.
+
+   If the MDS mitigation is enabled and SMT is disabled, guest to host and
+   guest to guest attacks are prevented.
+
+.. _mds_default_mitigations:
+
+Default mitigations
+-------------------
+
+  The kernel default mitigations for vulnerable processors are:
+
+  - Enable CPU buffer clearing
+
+  The kernel does not by default enforce the disabling of SMT, which leaves
+  SMT systems vulnerable when running untrusted code. The same rationale as
+  for L1TF applies.
+  See :ref:`Documentation/admin-guide/hw-vuln//l1tf.rst <default_mitigations>`.