Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

5 files changed, 114 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt
new file mode 100644
index 000000000..baecc4a85
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt
@@ -0,0 +1,29 @@
+* Asahi Kasei AK8974 magnetometer sensor
+
+Required properties:
+
+- compatible : should be "asahi-kasei,ak8974"
+- reg : the I2C address of the magnetometer
+
+Optional properties:
+
+- avdd-supply: regulator supply for the analog voltage
+  (see regulator/regulator.txt)
+- dvdd-supply: regulator supply for the digital voltage
+  (see regulator/regulator.txt)
+- interrupts: data ready (DRDY) and interrupt (INT1) lines
+  from the chip, the DRDY interrupt must be placed first.
+  The interrupts can be triggered on rising or falling
+  edges alike.
+- mount-matrix: an optional 3x3 mounting rotation matrix
+
+Example:
+
+ak8974@f {
+	compatible = "asahi-kasei,ak8974";
+	reg = <0x0f>;
+	avdd-supply = <&foo_reg>;
+	dvdd-supply = <&bar_reg>;
+	interrupts = <0 IRQ_TYPE_EDGE_RISING>,
+		     <1 IRQ_TYPE_EDGE_RISING>;
+};
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt
new file mode 100644
index 000000000..aa67ceb0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt
@@ -0,0 +1,30 @@
+* AsahiKASEI AK8975 magnetometer sensor
+
+Required properties:
+
+  - compatible : should be "asahi-kasei,ak8975"
+  - reg : the I2C address of the magnetometer
+
+Optional properties:
+
+  - gpios : should be device tree identifier of the magnetometer DRDY pin
+  - vdd-supply: an optional regulator that needs to be on to provide VDD
+  - mount-matrix: an optional 3x3 mounting rotation matrix
+
+Example:
+
+ak8975@c {
+        compatible = "asahi-kasei,ak8975";
+        reg = <0x0c>;
+        gpios = <&gpj0 7 0>;
+        vdd-supply = <&ldo_3v3_gnss>;
+        mount-matrix = "-0.984807753012208",  /* x0 */
+                       "0",                   /* y0 */
+                       "-0.173648177666930",  /* z0 */
+                       "0",                   /* x1 */
+                       "-1",                  /* y1 */
+                       "0",                   /* z1 */
+                       "-0.173648177666930",  /* x2 */
+                       "0",                   /* y2 */
+                       "0.984807753012208";   /* z2 */
+};
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
new file mode 100644
index 000000000..fd5fca90f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
@@ -0,0 +1,21 @@
+* Bosch BMC150 magnetometer sensor
+
+http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf
+
+Required properties:
+
+  - compatible : should be "bosch,bmc150_magn"
+  - reg : the I2C address of the magnetometer
+
+Optional properties:
+
+  - interrupts : interrupt mapping for GPIO IRQ
+
+Example:
+
+bmc150_magn@12 {
+        compatible = "bosch,bmc150_magn";
+        reg = <0x12>;
+        interrupt-parent = <&gpio1>;
+        interrupts = <0 1>;
+};
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt b/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt
new file mode 100644
index 000000000..8e191eef0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt
@@ -0,0 +1,21 @@
+* Honeywell HMC5843 magnetometer sensor
+
+Required properties:
+
+  - compatible : should be "honeywell,hmc5843"
+  Other models which are supported with driver are:
+	"honeywell,hmc5883"
+	"honeywell,hmc5883l"
+	"honeywell,hmc5983"
+  - reg : the I2C address of the magnetometer - typically 0x1e
+
+Optional properties:
+
+  - gpios : should be device tree identifier of the magnetometer DRDY pin
+
+Example:
+
+hmc5843@1e {
+        compatible = "honeywell,hmc5843"
+        reg = <0x1e>;
+};
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt b/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt
new file mode 100644
index 000000000..a01235c7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt
@@ -0,0 +1,13 @@
+* MEMSIC MMC35240 magnetometer sensor
+
+Required properties:
+
+  - compatible : should be "memsic,mmc35240"
+  - reg : the I2C address of the magnetometer
+
+Example:
+
+mmc35240@30 {
+        compatible = "memsic,mmc35240";
+        reg = <0x30>;
+};