Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 30 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/pci/pci-thunder-ecam.txt b/Documentation/devicetree/bindings/pci/pci-thunder-ecam.txt
new file mode 100644
index 000000000..f478874b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pci-thunder-ecam.txt
@@ -0,0 +1,30 @@
+* ThunderX PCI host controller for pass-1.x silicon
+
+Firmware-initialized PCI host controller to on-chip devices found on
+some Cavium ThunderX processors.  These devices have ECAM-based config
+access, but the BARs are all at fixed addresses.  We handle the fixed
+addresses by synthesizing Enhanced Allocation (EA) capabilities for
+these devices.
+
+The properties and their meanings are identical to those described in
+host-generic-pci.txt except as listed below.
+
+Properties of the host controller node that differ from
+host-generic-pci.txt:
+
+- compatible     : Must be "cavium,pci-host-thunder-ecam"
+
+Example:
+
+	pcie@84b000000000 {
+		compatible = "cavium,pci-host-thunder-ecam";
+		device_type = "pci";
+		msi-parent = <&its>;
+		msi-map = <0 &its 0x30000 0x10000>;
+		bus-range = <0 31>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		#stream-id-cells = <1>;
+		reg = <0x84b0 0x00000000 0 0x02000000>;  /* Configuration space */
+		ranges = <0x03000000 0x8180 0x00000000 0x8180 0x00000000 0x80 0x00000000>; /* mem ranges */
+	};