Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 360 insertions, 0 deletions

diff --git a/Documentation/sound/soc/dapm.rst b/Documentation/sound/soc/dapm.rst
new file mode 100644
index 000000000..8e4410793
--- /dev/null
+++ b/Documentation/sound/soc/dapm.rst
@@ -0,0 +1,360 @@
+===================================================
+Dynamic Audio Power Management for Portable Devices
+===================================================
+
+Description
+===========
+
+Dynamic Audio Power Management (DAPM) is designed to allow portable
+Linux devices to use the minimum amount of power within the audio
+subsystem at all times. It is independent of other kernel PM and as
+such, can easily co-exist with the other PM systems.
+
+DAPM is also completely transparent to all user space applications as
+all power switching is done within the ASoC core. No code changes or
+recompiling are required for user space applications. DAPM makes power
+switching decisions based upon any audio stream (capture/playback)
+activity and audio mixer settings within the device.
+
+DAPM spans the whole machine. It covers power control within the entire
+audio subsystem, this includes internal codec power blocks and machine
+level power systems.
+
+There are 4 power domains within DAPM
+
+Codec bias domain
+      VREF, VMID (core codec and audio power)
+
+      Usually controlled at codec probe/remove and suspend/resume, although
+      can be set at stream time if power is not needed for sidetone, etc.
+
+Platform/Machine domain
+      physically connected inputs and outputs
+
+      Is platform/machine and user action specific, is configured by the
+      machine driver and responds to asynchronous events e.g when HP
+      are inserted
+
+Path domain
+      audio subsystem signal paths
+
+      Automatically set when mixer and mux settings are changed by the user.
+      e.g. alsamixer, amixer.
+
+Stream domain
+      DACs and ADCs.
+
+      Enabled and disabled when stream playback/capture is started and
+      stopped respectively. e.g. aplay, arecord.
+
+All DAPM power switching decisions are made automatically by consulting an audio
+routing map of the whole machine. This map is specific to each machine and
+consists of the interconnections between every audio component (including
+internal codec components). All audio components that effect power are called
+widgets hereafter.
+
+
+DAPM Widgets
+============
+
+Audio DAPM widgets fall into a number of types:-
+
+Mixer
+	Mixes several analog signals into a single analog signal.
+Mux
+	An analog switch that outputs only one of many inputs.
+PGA
+	A programmable gain amplifier or attenuation widget.
+ADC
+	Analog to Digital Converter
+DAC
+	Digital to Analog Converter
+Switch
+	An analog switch
+Input
+	A codec input pin
+Output
+	A codec output pin
+Headphone
+	Headphone (and optional Jack)
+Mic
+	Mic (and optional Jack)
+Line
+	Line Input/Output (and optional Jack)
+Speaker
+	Speaker
+Supply
+	Power or clock supply widget used by other widgets.
+Regulator
+	External regulator that supplies power to audio components.
+Clock
+	External clock that supplies clock to audio components.
+AIF IN
+	Audio Interface Input (with TDM slot mask).
+AIF OUT
+	Audio Interface Output (with TDM slot mask).
+Siggen
+	Signal Generator.
+DAI IN
+	Digital Audio Interface Input.
+DAI OUT
+	Digital Audio Interface Output.
+DAI Link
+	DAI Link between two DAI structures
+Pre
+	Special PRE widget (exec before all others)
+Post
+	Special POST widget (exec after all others)
+Buffer
+	Inter widget audio data buffer within a DSP.
+Scheduler
+	DSP internal scheduler that schedules component/pipeline processing
+	work.
+Effect
+	Widget that performs an audio processing effect.
+SRC
+	Sample Rate Converter within DSP or CODEC
+ASRC
+	Asynchronous Sample Rate Converter within DSP or CODEC
+Encoder
+	Widget that encodes audio data from one format (usually PCM) to another
+	usually more compressed format.
+Decoder
+	Widget that decodes audio data from a compressed format to an
+	uncompressed format like PCM.
+
+
+(Widgets are defined in include/sound/soc-dapm.h)
+
+Widgets can be added to the sound card by any of the component driver types.
+There are convenience macros defined in soc-dapm.h that can be used to quickly
+build a list of widgets of the codecs and machines DAPM widgets.
+
+Most widgets have a name, register, shift and invert. Some widgets have extra
+parameters for stream name and kcontrols.
+
+
+Stream Domain Widgets
+---------------------
+
+Stream Widgets relate to the stream power domain and only consist of ADCs
+(analog to digital converters), DACs (digital to analog converters),
+AIF IN and AIF OUT.
+
+Stream widgets have the following format:-
+::
+
+  SND_SOC_DAPM_DAC(name, stream name, reg, shift, invert),
+  SND_SOC_DAPM_AIF_IN(name, stream, slot, reg, shift, invert)
+
+NOTE: the stream name must match the corresponding stream name in your codec
+snd_soc_codec_dai.
+
+e.g. stream widgets for HiFi playback and capture
+::
+
+  SND_SOC_DAPM_DAC("HiFi DAC", "HiFi Playback", REG, 3, 1),
+  SND_SOC_DAPM_ADC("HiFi ADC", "HiFi Capture", REG, 2, 1),
+
+e.g. stream widgets for AIF
+::
+
+  SND_SOC_DAPM_AIF_IN("AIF1RX", "AIF1 Playback", 0, SND_SOC_NOPM, 0, 0),
+  SND_SOC_DAPM_AIF_OUT("AIF1TX", "AIF1 Capture", 0, SND_SOC_NOPM, 0, 0),
+
+
+Path Domain Widgets
+-------------------
+
+Path domain widgets have a ability to control or affect the audio signal or
+audio paths within the audio subsystem. They have the following form:-
+::
+
+  SND_SOC_DAPM_PGA(name, reg, shift, invert, controls, num_controls)
+
+Any widget kcontrols can be set using the controls and num_controls members.
+
+e.g. Mixer widget (the kcontrols are declared first)
+::
+
+  /* Output Mixer */
+  static const snd_kcontrol_new_t wm8731_output_mixer_controls[] = {
+  SOC_DAPM_SINGLE("Line Bypass Switch", WM8731_APANA, 3, 1, 0),
+  SOC_DAPM_SINGLE("Mic Sidetone Switch", WM8731_APANA, 5, 1, 0),
+  SOC_DAPM_SINGLE("HiFi Playback Switch", WM8731_APANA, 4, 1, 0),
+  };
+
+  SND_SOC_DAPM_MIXER("Output Mixer", WM8731_PWR, 4, 1, wm8731_output_mixer_controls,
+	ARRAY_SIZE(wm8731_output_mixer_controls)),
+
+If you don't want the mixer elements prefixed with the name of the mixer widget,
+you can use SND_SOC_DAPM_MIXER_NAMED_CTL instead. the parameters are the same
+as for SND_SOC_DAPM_MIXER.
+
+
+Machine domain Widgets
+----------------------
+
+Machine widgets are different from codec widgets in that they don't have a
+codec register bit associated with them. A machine widget is assigned to each
+machine audio component (non codec or DSP) that can be independently
+powered. e.g.
+
+* Speaker Amp
+* Microphone Bias
+* Jack connectors
+
+A machine widget can have an optional call back.
+
+e.g. Jack connector widget for an external Mic that enables Mic Bias
+when the Mic is inserted:-::
+
+  static int spitz_mic_bias(struct snd_soc_dapm_widget* w, int event)
+  {
+	gpio_set_value(SPITZ_GPIO_MIC_BIAS, SND_SOC_DAPM_EVENT_ON(event));
+	return 0;
+  }
+
+  SND_SOC_DAPM_MIC("Mic Jack", spitz_mic_bias),
+
+
+Codec (BIAS) Domain
+-------------------
+
+The codec bias power domain has no widgets and is handled by the codecs DAPM
+event handler. This handler is called when the codec powerstate is changed wrt
+to any stream event or by kernel PM events.
+
+
+Virtual Widgets
+---------------
+
+Sometimes widgets exist in the codec or machine audio map that don't have any
+corresponding soft power control. In this case it is necessary to create
+a virtual widget - a widget with no control bits e.g.
+::
+
+  SND_SOC_DAPM_MIXER("AC97 Mixer", SND_SOC_DAPM_NOPM, 0, 0, NULL, 0),
+
+This can be used to merge to signal paths together in software.
+
+After all the widgets have been defined, they can then be added to the DAPM
+subsystem individually with a call to snd_soc_dapm_new_control().
+
+
+Codec/DSP Widget Interconnections
+=================================
+
+Widgets are connected to each other within the codec, platform and machine by
+audio paths (called interconnections). Each interconnection must be defined in
+order to create a map of all audio paths between widgets.
+
+This is easiest with a diagram of the codec or DSP (and schematic of the machine
+audio system), as it requires joining widgets together via their audio signal
+paths.
+
+e.g., from the WM8731 output mixer (wm8731.c)
+
+The WM8731 output mixer has 3 inputs (sources)
+
+1. Line Bypass Input
+2. DAC (HiFi playback)
+3. Mic Sidetone Input
+
+Each input in this example has a kcontrol associated with it (defined in example
+above) and is connected to the output mixer via its kcontrol name. We can now
+connect the destination widget (wrt audio signal) with its source widgets.
+::
+
+	/* output mixer */
+	{"Output Mixer", "Line Bypass Switch", "Line Input"},
+	{"Output Mixer", "HiFi Playback Switch", "DAC"},
+	{"Output Mixer", "Mic Sidetone Switch", "Mic Bias"},
+
+So we have :-
+
+* Destination Widget  <=== Path Name <=== Source Widget, or
+* Sink, Path, Source, or
+* ``Output Mixer`` is connected to the ``DAC`` via the ``HiFi Playback Switch``.
+
+When there is no path name connecting widgets (e.g. a direct connection) we
+pass NULL for the path name.
+
+Interconnections are created with a call to:-
+::
+
+  snd_soc_dapm_connect_input(codec, sink, path, source);
+
+Finally, snd_soc_dapm_new_widgets(codec) must be called after all widgets and
+interconnections have been registered with the core. This causes the core to
+scan the codec and machine so that the internal DAPM state matches the
+physical state of the machine.
+
+
+Machine Widget Interconnections
+-------------------------------
+Machine widget interconnections are created in the same way as codec ones and
+directly connect the codec pins to machine level widgets.
+
+e.g. connects the speaker out codec pins to the internal speaker.
+::
+
+	/* ext speaker connected to codec pins LOUT2, ROUT2  */
+	{"Ext Spk", NULL , "ROUT2"},
+	{"Ext Spk", NULL , "LOUT2"},
+
+This allows the DAPM to power on and off pins that are connected (and in use)
+and pins that are NC respectively.
+
+
+Endpoint Widgets
+================
+An endpoint is a start or end point (widget) of an audio signal within the
+machine and includes the codec. e.g.
+
+* Headphone Jack
+* Internal Speaker
+* Internal Mic
+* Mic Jack
+* Codec Pins
+
+Endpoints are added to the DAPM graph so that their usage can be determined in
+order to save power. e.g. NC codecs pins will be switched OFF, unconnected
+jacks can also be switched OFF.
+
+
+DAPM Widget Events
+==================
+
+Some widgets can register their interest with the DAPM core in PM events.
+e.g. A Speaker with an amplifier registers a widget so the amplifier can be
+powered only when the spk is in use.
+::
+
+  /* turn speaker amplifier on/off depending on use */
+  static int corgi_amp_event(struct snd_soc_dapm_widget *w, int event)
+  {
+	gpio_set_value(CORGI_GPIO_APM_ON, SND_SOC_DAPM_EVENT_ON(event));
+	return 0;
+  }
+
+  /* corgi machine dapm widgets */
+  static const struct snd_soc_dapm_widget wm8731_dapm_widgets =
+	SND_SOC_DAPM_SPK("Ext Spk", corgi_amp_event);
+
+Please see soc-dapm.h for all other widgets that support events.
+
+
+Event types
+-----------
+
+The following event types are supported by event widgets.
+::
+
+  /* dapm event types */
+  #define SND_SOC_DAPM_PRE_PMU	0x1 	/* before widget power up */
+  #define SND_SOC_DAPM_POST_PMU	0x2		/* after widget power up */
+  #define SND_SOC_DAPM_PRE_PMD	0x4 	/* before widget power down */
+  #define SND_SOC_DAPM_POST_PMD	0x8		/* after widget power down */
+  #define SND_SOC_DAPM_PRE_REG	0x10	/* before audio path setup */
+  #define SND_SOC_DAPM_POST_REG	0x20	/* after audio path setup */