Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 257 insertions, 0 deletions

diff --git a/arch/arc/include/asm/entry-arcv2.h b/arch/arc/include/asm/entry-arcv2.h
new file mode 100644
index 000000000..225e7df2d
--- /dev/null
+++ b/arch/arc/include/asm/entry-arcv2.h
@@ -0,0 +1,257 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __ASM_ARC_ENTRY_ARCV2_H
+#define __ASM_ARC_ENTRY_ARCV2_H
+
+#include <asm/asm-offsets.h>
+#include <asm/irqflags-arcv2.h>
+#include <asm/thread_info.h>	/* For THREAD_SIZE */
+
+/*------------------------------------------------------------------------*/
+.macro INTERRUPT_PROLOGUE	called_from
+
+	; Before jumping to Interrupt Vector, hardware micro-ops did following:
+	;   1. SP auto-switched to kernel mode stack
+	;   2. STATUS32.Z flag set to U mode at time of interrupt (U:1, K:0)
+	;   3. Auto saved: r0-r11, blink, LPE,LPS,LPC, JLI,LDI,EI, PC, STAT32
+	;
+	; Now manually save: r12, sp, fp, gp, r25
+
+#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
+.ifnc \called_from, exception
+	st.as	r9, [sp, -10]	; save r9 in it's final stack slot
+	sub	sp, sp, 12	; skip JLI, LDI, EI
+
+	PUSH	lp_count
+	PUSHAX	lp_start
+	PUSHAX	lp_end
+	PUSH	blink
+
+	PUSH	r11
+	PUSH	r10
+
+	sub	sp, sp, 4	; skip r9
+
+	PUSH	r8
+	PUSH	r7
+	PUSH	r6
+	PUSH	r5
+	PUSH	r4
+	PUSH	r3
+	PUSH	r2
+	PUSH	r1
+	PUSH	r0
+.endif
+#endif
+
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	PUSH	r59
+	PUSH	r58
+#endif
+
+	PUSH	r30
+	PUSH	r12
+
+	; Saving pt_regs->sp correctly requires some extra work due to the way
+	; Auto stack switch works
+	;  - U mode: retrieve it from AUX_USER_SP
+	;  - K mode: add the offset from current SP where H/w starts auto push
+	;
+	; Utilize the fact that Z bit is set if Intr taken in U mode
+	mov.nz	r9, sp
+	add.nz	r9, r9, SZ_PT_REGS - PT_sp - 4
+	bnz	1f
+
+	lr	r9, [AUX_USER_SP]
+1:
+	PUSH	r9	; SP
+
+	PUSH	fp
+	PUSH	gp
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	PUSH	r25			; user_r25
+	GET_CURR_TASK_ON_CPU	r25
+#else
+	sub	sp, sp, 4
+#endif
+
+.ifnc \called_from, exception
+	sub	sp, sp, 12	; BTA/ECR/orig_r0 placeholder per pt_regs
+.endif
+
+.endm
+
+/*------------------------------------------------------------------------*/
+.macro INTERRUPT_EPILOGUE	called_from
+
+.ifnc \called_from, exception
+	add	sp, sp, 12	; skip BTA/ECR/orig_r0 placeholderss
+.endif
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	POP	r25
+#else
+	add	sp, sp, 4
+#endif
+
+	POP	gp
+	POP	fp
+
+	; Don't touch AUX_USER_SP if returning to K mode (Z bit set)
+	; (Z bit set on K mode is inverse of INTERRUPT_PROLOGUE)
+	add.z	sp, sp, 4
+	bz	1f
+
+	POPAX	AUX_USER_SP
+1:
+	POP	r12
+	POP	r30
+
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	POP	r58
+	POP	r59
+#endif
+
+#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
+.ifnc \called_from, exception
+	POP	r0
+	POP	r1
+	POP	r2
+	POP	r3
+	POP	r4
+	POP	r5
+	POP	r6
+	POP	r7
+	POP	r8
+	POP	r9
+	POP	r10
+	POP	r11
+
+	POP	blink
+	POPAX	lp_end
+	POPAX	lp_start
+
+	POP	r9
+	mov	lp_count, r9
+
+	add	sp, sp, 12	; skip JLI, LDI, EI
+	ld.as	r9, [sp, -10]	; reload r9 which got clobbered
+.endif
+#endif
+
+.endm
+
+/*------------------------------------------------------------------------*/
+.macro EXCEPTION_PROLOGUE
+
+	; Before jumping to Exception Vector, hardware micro-ops did following:
+	;   1. SP auto-switched to kernel mode stack
+	;   2. STATUS32.Z flag set to U mode at time of interrupt (U:1,K:0)
+	;
+	; Now manually save the complete reg file
+
+	PUSH	r9		; freeup a register: slot of erstatus
+
+	PUSHAX	eret
+	sub	sp, sp, 12	; skip JLI, LDI, EI
+	PUSH	lp_count
+	PUSHAX	lp_start
+	PUSHAX	lp_end
+	PUSH	blink
+
+	PUSH	r11
+	PUSH	r10
+
+	ld.as	r9,  [sp, 10]	; load stashed r9 (status32 stack slot)
+	lr	r10, [erstatus]
+	st.as	r10, [sp, 10]	; save status32 at it's right stack slot
+
+	PUSH	r9
+	PUSH	r8
+	PUSH	r7
+	PUSH	r6
+	PUSH	r5
+	PUSH	r4
+	PUSH	r3
+	PUSH	r2
+	PUSH	r1
+	PUSH	r0
+
+	; -- for interrupts, regs above are auto-saved by h/w in that order --
+	; Now do what ISR prologue does (manually save r12, sp, fp, gp, r25)
+	;
+	; Set Z flag if this was from U mode (expected by INTERRUPT_PROLOGUE)
+	; Although H/w exception micro-ops do set Z flag for U mode (just like
+	; for interrupts), it could get clobbered in case we soft land here from
+	; a TLB Miss exception handler (tlbex.S)
+
+	and	r10, r10, STATUS_U_MASK
+	xor.f	0, r10, STATUS_U_MASK
+
+	INTERRUPT_PROLOGUE  exception
+
+	PUSHAX	erbta
+	PUSHAX	ecr		; r9 contains ECR, expected by EV_Trap
+
+	PUSH	r0		; orig_r0
+.endm
+
+/*------------------------------------------------------------------------*/
+.macro EXCEPTION_EPILOGUE
+
+	; Assumes r0 has PT_status32
+	btst   r0, STATUS_U_BIT	; Z flag set if K, used in INTERRUPT_EPILOGUE
+
+	add	sp, sp, 8	; orig_r0/ECR don't need restoring
+	POPAX	erbta
+
+	INTERRUPT_EPILOGUE  exception
+
+	POP	r0
+	POP	r1
+	POP	r2
+	POP	r3
+	POP	r4
+	POP	r5
+	POP	r6
+	POP	r7
+	POP	r8
+	POP	r9
+	POP	r10
+	POP	r11
+
+	POP	blink
+	POPAX	lp_end
+	POPAX	lp_start
+
+	POP	r9
+	mov	lp_count, r9
+
+	add	sp, sp, 12	; skip JLI, LDI, EI
+	POPAX	eret
+	POPAX	erstatus
+
+	ld.as	r9, [sp, -12]	; reload r9 which got clobbered
+.endm
+
+.macro FAKE_RET_FROM_EXCPN
+	lr      r9, [status32]
+	bic     r9, r9, (STATUS_U_MASK|STATUS_DE_MASK|STATUS_AE_MASK)
+	or      r9, r9, STATUS_IE_MASK
+	kflag   r9
+.endm
+
+/* Get thread_info of "current" tsk */
+.macro GET_CURR_THR_INFO_FROM_SP  reg
+	bmskn \reg, sp, THREAD_SHIFT - 1
+.endm
+
+/* Get CPU-ID of this core */
+.macro  GET_CPU_ID  reg
+	lr  \reg, [identity]
+	xbfu \reg, \reg, 0xE8	/* 00111    01000 */
+				/* M = 8-1  N = 8 */
+.endm
+
+#endif