Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 175 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
new file mode 100644
index 000000000..cf1139973
--- /dev/null
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -0,0 +1,175 @@
+/*
+ * DTS file for all SPEAr1340 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+	compatible = "st,spear1340";
+
+	ahb {
+
+		spics: spics@e0700000{
+			compatible = "st,spear-spics-gpio";
+			reg = <0xe0700000 0x1000>;
+			st-spics,peripcfg-reg = <0x42c>;
+			st-spics,sw-enable-bit = <21>;
+			st-spics,cs-value-bit = <20>;
+			st-spics,cs-enable-mask = <3>;
+			st-spics,cs-enable-shift = <18>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		miphy0: miphy@eb800000 {
+			compatible = "st,spear1340-miphy";
+			reg = <0xeb800000 0x4000>;
+			misc = <&misc>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		ahci0: ahci@b1000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1000000 0x10000>;
+			interrupts = <0 72 0x4>;
+			phys = <&miphy0 0>;
+			phy-names = "sata-phy";
+			status = "disabled";
+		};
+
+		pcie0: pcie@b1000000 {
+			compatible = "st,spear1340-pcie", "snps,dw-pcie";
+			reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
+			reg-names = "dbi", "config";
+			interrupts = <0 68 0x4>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0x0 0 &gic 0 68 0x4>;
+			num-lanes = <1>;
+			phys = <&miphy0 1>;
+			phy-names = "pcie-phy";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0	 0x80020000 0 0x00010000   /* downstream I/O */
+				0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+		};
+
+		i2s-play@b2400000 {
+			compatible = "snps,designware-i2s";
+			reg = <0xb2400000 0x10000>;
+			interrupt-names = "play_irq";
+			interrupts = <0 98 0x4
+				      0 99 0x4>;
+			play;
+			channel = <8>;
+			status = "disabled";
+		};
+
+		i2s-rec@b2000000 {
+			compatible = "snps,designware-i2s";
+			reg = <0xb2000000 0x10000>;
+			interrupt-names = "record_irq";
+			interrupts = <0 100  0x4
+				      0 101 0x4>;
+			record;
+			channel = <8>;
+			status = "disabled";
+		};
+
+		pinmux: pinmux@e0700000 {
+			compatible = "st,spear1340-pinmux";
+			reg = <0xe0700000 0x1000>;
+			#gpio-range-cells = <3>;
+		};
+
+		pwm: pwm@e0180000 {
+			compatible ="st,spear13xx-pwm";
+			reg = <0xe0180000 0x1000>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		spdif-in@d0100000 {
+			compatible = "st,spdif-in";
+			reg = < 0xd0100000 0x20000
+				0xd0110000 0x10000 >;
+			interrupts = <0 84 0x4>;
+			status = "disabled";
+		};
+
+		spdif-out@d0000000 {
+			compatible = "st,spdif-out";
+			reg = <0xd0000000 0x20000>;
+			interrupts = <0 85 0x4>;
+			status = "disabled";
+		};
+
+		spi1: spi@5d400000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x5d400000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 99 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			i2c1: i2c@b4000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xb4000000 0x1000>;
+				interrupts = <0 104 0x4>;
+				write-16bit;
+				status = "disabled";
+			};
+
+			serial@b4100000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb4100000 0x1000>;
+				interrupts = <0 105 0x4>;
+				status = "disabled";
+				dmas = <&dwdma0 13 0 1>,
+					<&dwdma0 12 1 0>;
+				dma-names = "rx", "tx";
+			};
+
+			thermal@e07008c4 {
+				st,thermal-flags = <0x2a00>;
+			};
+
+			gpiopinctrl: gpio@e2800000 {
+				compatible = "st,spear-plgpio";
+				reg = <0xe2800000 0x1000>;
+				interrupts = <0 107 0x4>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinmux 0 0 252>;
+				status = "disabled";
+
+				st-plgpio,ngpio = <250>;
+				st-plgpio,wdata-reg = <0x40>;
+				st-plgpio,dir-reg = <0x00>;
+				st-plgpio,ie-reg = <0x80>;
+				st-plgpio,rdata-reg = <0x20>;
+				st-plgpio,mis-reg = <0xa0>;
+				st-plgpio,eit-reg = <0x60>;
+			};
+		};
+	};
+};