Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

12 files changed, 1690 insertions, 0 deletions

diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
new file mode 100644
index 000000000..ba124f870
--- /dev/null
+++ b/arch/arm/mach-integrator/Kconfig
@@ -0,0 +1,161 @@
+menuconfig ARCH_INTEGRATOR
+	bool "ARM Ltd. Integrator family"
+	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6
+	select ARM_AMBA
+	select COMMON_CLK_VERSATILE
+	select CMA
+	select DMA_CMA
+	select HAVE_TCM
+	select ICST
+	select MFD_SYSCON
+	select PLAT_VERSATILE
+	select POWER_RESET
+	select POWER_RESET_VERSATILE
+	select POWER_SUPPLY
+	select SOC_INTEGRATOR_CM
+	select SPARSE_IRQ
+	select VERSATILE_FPGA_IRQ
+	help
+	  Support for ARM's Integrator platform.
+
+if ARCH_INTEGRATOR
+
+config ARCH_INTEGRATOR_AP
+	bool "Support Integrator/AP and Integrator/PP2 platforms"
+	select INTEGRATOR_AP_TIMER
+	select SERIAL_AMBA_PL010 if TTY
+	select SERIAL_AMBA_PL010_CONSOLE if TTY
+	select SOC_BUS
+	help
+	  Include support for the ARM(R) Integrator/AP and
+	  Integrator/PP2 platforms.
+
+config INTEGRATOR_IMPD1
+	bool "Include support for Integrator/IM-PD1"
+	depends on ARCH_INTEGRATOR_AP
+	select ARM_VIC
+	select GPIO_PL061
+	select GPIOLIB
+	select REGULATOR
+	select REGULATOR_FIXED_VOLTAGE
+	help
+	  The IM-PD1 is an add-on logic module for the Integrator which
+	  allows ARM(R) Ltd PrimeCells to be developed and evaluated.
+	  The IM-PD1 can be found on the Integrator/PP2 platform.
+
+config INTEGRATOR_CM7TDMI
+	bool "Integrator/CM7TDMI core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4 && !MMU
+	select CPU_ARM7TDMI
+
+config INTEGRATOR_CM720T
+	bool "Integrator/CM720T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T
+	select CPU_ARM720T
+
+config INTEGRATOR_CM740T
+	bool "Integrator/CM740T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T && !MMU
+	select CPU_ARM740T
+
+config INTEGRATOR_CM920T
+	bool "Integrator/CM920T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T
+	select CPU_ARM920T
+
+config INTEGRATOR_CM922T_XA10
+	bool "Integrator/CM922T-XA10 core module"
+	depends on ARCH_MULTI_V4T
+	depends on ARCH_INTEGRATOR_AP
+	select CPU_ARM922T
+
+config INTEGRATOR_CM926EJS
+	bool "Integrator/CM926EJ-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+
+config INTEGRATOR_CM940T
+	bool "Integrator/CM940T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T && !MMU
+	select CPU_ARM940T
+
+config INTEGRATOR_CM946ES
+	bool "Integrator/CM946E-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5 && !MMU
+	select CPU_ARM946E
+
+config INTEGRATOR_CM966ES
+	bool "Integrator/CM966E-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on BROKEN # no kernel support
+
+config INTEGRATOR_CM10200E_REV0
+	bool "Integrator/CM10200E rev.0 core module"
+	depends on ARCH_INTEGRATOR_AP && n
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1020
+
+config INTEGRATOR_CM10200E
+	bool "Integrator/CM10200E core module"
+	depends on ARCH_INTEGRATOR_AP && n
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1020E
+
+config INTEGRATOR_CM10220E
+	bool "Integrator/CM10220E core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1022
+
+config INTEGRATOR_CM1026EJS
+	bool "Integrator/CM1026EJ-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1026
+
+config INTEGRATOR_CM1136JFS
+	bool "Integrator/CM1136JF-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V6
+	select CPU_V6
+
+config ARCH_INTEGRATOR_CP
+	bool "Support Integrator/CP platform"
+	depends on (!MMU || ARCH_MULTI_V5 || ARCH_MULTI_V6)
+	select ARM_TIMER_SP804
+	select SERIAL_AMBA_PL011 if TTY
+	select SERIAL_AMBA_PL011_CONSOLE if TTY
+	select SOC_BUS
+	help
+	  Include support for the ARM(R) Integrator CP platform.
+
+config INTEGRATOR_CT7T
+	bool "Integrator/CT7TD (ARM7TDMI) core tile"
+	depends on ARCH_INTEGRATOR_CP
+	depends on ARCH_MULTI_V4T && !MMU
+	select CPU_ARM7TDMI
+
+config INTEGRATOR_CT926
+	bool "Integrator/CT926 (ARM926EJ-S) core tile"
+	depends on ARCH_INTEGRATOR_CP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+
+config INTEGRATOR_CTB36
+	bool "Integrator/CTB36 (ARM1136JF-S) core tile"
+	depends on ARCH_INTEGRATOR_CP
+	depends on ARCH_MULTI_V6
+	select CPU_V6
+
+config ARCH_CINTEGRATOR
+	depends on ARCH_INTEGRATOR_CP
+	def_bool y
+
+endif
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
new file mode 100644
index 000000000..71b97ffe8
--- /dev/null
+++ b/arch/arm/mach-integrator/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y					:= core.o lm.o
+obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
+obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o
+obj-$(CONFIG_INTEGRATOR_IMPD1)		+= impd1.o
diff --git a/arch/arm/mach-integrator/cm.h b/arch/arm/mach-integrator/cm.h
new file mode 100644
index 000000000..f09ea18a5
--- /dev/null
+++ b/arch/arm/mach-integrator/cm.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * access the core module control register.
+ */
+u32 cm_get(void);
+void cm_control(u32, u32);
+
+struct device_node;
+void cm_init(void);
+void cm_clear_irqs(void);
+
+#define CM_CTRL_LED			(1 << 0)
+#define CM_CTRL_nMBDET			(1 << 1)
+#define CM_CTRL_REMAP			(1 << 2)
+
+/*
+ * Integrator/AP,PP2 specific
+ */
+#define CM_CTRL_HIGHVECTORS		(1 << 4)
+#define CM_CTRL_BIGENDIAN		(1 << 5)
+#define CM_CTRL_FASTBUS			(1 << 6)
+#define CM_CTRL_SYNC			(1 << 7)
+
+/*
+ * ARM926/946/966 Integrator/CP specific
+ */
+#define CM_CTRL_LCDBIASEN		(1 << 8)
+#define CM_CTRL_LCDBIASUP		(1 << 9)
+#define CM_CTRL_LCDBIASDN		(1 << 10)
+#define CM_CTRL_LCDMUXSEL_MASK		(7 << 11)
+#define CM_CTRL_LCDMUXSEL_GENLCD	(1 << 11)
+#define CM_CTRL_LCDMUXSEL_VGA565_TFT555	(2 << 11)
+#define CM_CTRL_LCDMUXSEL_SHARPLCD	(3 << 11)
+#define CM_CTRL_LCDMUXSEL_VGA555_TFT555	(4 << 11)
+#define CM_CTRL_LCDEN0			(1 << 14)
+#define CM_CTRL_LCDEN1			(1 << 15)
+#define CM_CTRL_STATIC1			(1 << 16)
+#define CM_CTRL_STATIC2			(1 << 17)
+#define CM_CTRL_STATIC			(1 << 18)
+#define CM_CTRL_n24BITEN		(1 << 19)
+#define CM_CTRL_EBIWP			(1 << 20)
diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h
new file mode 100644
index 000000000..f053aeebe
--- /dev/null
+++ b/arch/arm/mach-integrator/common.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/reboot.h>
+#include <linux/amba/serial.h>
+extern struct amba_pl010_data ap_uart_data;
+void integrator_init_early(void);
+int integrator_init(bool is_cp);
+void integrator_reserve(void);
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
new file mode 100644
index 000000000..948872a41
--- /dev/null
+++ b/arch/arm/mach-integrator/core.c
@@ -0,0 +1,99 @@
+/*
+ *  linux/arch/arm/mach-integrator/core.c
+ *
+ *  Copyright (C) 2000-2003 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/memblock.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
+#include <linux/io.h>
+#include <linux/stat.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/time.h>
+#include <asm/pgtable.h>
+
+#include "hardware.h"
+#include "cm.h"
+#include "common.h"
+
+static DEFINE_RAW_SPINLOCK(cm_lock);
+static void __iomem *cm_base;
+
+/**
+ * cm_get - get the value from the CM_CTRL register
+ */
+u32 cm_get(void)
+{
+	return readl(cm_base + INTEGRATOR_HDR_CTRL_OFFSET);
+}
+
+/**
+ * cm_control - update the CM_CTRL register.
+ * @mask: bits to change
+ * @set: bits to set
+ */
+void cm_control(u32 mask, u32 set)
+{
+	unsigned long flags;
+	u32 val;
+
+	raw_spin_lock_irqsave(&cm_lock, flags);
+	val = readl(cm_base + INTEGRATOR_HDR_CTRL_OFFSET) & ~mask;
+	writel(val | set, cm_base + INTEGRATOR_HDR_CTRL_OFFSET);
+	raw_spin_unlock_irqrestore(&cm_lock, flags);
+}
+
+void cm_clear_irqs(void)
+{
+	/* disable core module IRQs */
+	writel(0xffffffffU, cm_base + INTEGRATOR_HDR_IC_OFFSET +
+		IRQ_ENABLE_CLEAR);
+}
+
+static const struct of_device_id cm_match[] = {
+	{ .compatible = "arm,core-module-integrator"},
+	{ },
+};
+
+void cm_init(void)
+{
+	struct device_node *cm = of_find_matching_node(NULL, cm_match);
+
+	if (!cm) {
+		pr_crit("no core module node found in device tree\n");
+		return;
+	}
+	cm_base = of_iomap(cm, 0);
+	if (!cm_base) {
+		pr_crit("could not remap core module\n");
+		return;
+	}
+	cm_clear_irqs();
+}
+
+/*
+ * We need to stop things allocating the low memory; ideally we need a
+ * better implementation of GFP_DMA which does not assume that DMA-able
+ * memory starts at zero.
+ */
+void __init integrator_reserve(void)
+{
+	memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
+}
diff --git a/arch/arm/mach-integrator/hardware.h b/arch/arm/mach-integrator/hardware.h
new file mode 100644
index 000000000..857ca5f8b
--- /dev/null
+++ b/arch/arm/mach-integrator/hardware.h
@@ -0,0 +1,354 @@
+/*
+ *  This file contains the hardware definitions of the Integrator.
+ *
+ *  Copyright (C) 1998-1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef INTEGRATOR_HARDWARE_H
+#define INTEGRATOR_HARDWARE_H
+
+/*
+ * Where in virtual memory the IO devices (timers, system controllers
+ * and so on)
+ */
+#define IO_BASE			0xF0000000                 // VA of IO
+#define IO_SIZE			0x0B000000                 // How much?
+#define IO_START		INTEGRATOR_HDR_BASE        // PA of IO
+
+/* macro to get at IO space when running virtually */
+#ifdef CONFIG_MMU
+#define IO_ADDRESS(x)	(((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE)
+#else
+#define IO_ADDRESS(x)	(x)
+#endif
+
+#define __io_address(n)		((void __iomem *)IO_ADDRESS(n))
+
+/*
+ *  Integrator memory map
+ */
+#define INTEGRATOR_BOOT_ROM_LO          0x00000000
+#define INTEGRATOR_BOOT_ROM_HI          0x20000000
+#define INTEGRATOR_BOOT_ROM_BASE        INTEGRATOR_BOOT_ROM_HI	 /*  Normal position */
+#define INTEGRATOR_BOOT_ROM_SIZE        SZ_512K
+
+/*
+ * New Core Modules have different amounts of SSRAM, the amount of SSRAM
+ * fitted can be found in HDR_STAT.
+ *
+ * The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to
+ * the minimum amount of SSRAM fitted on any core module.
+ *
+ * New Core Modules also alias the SSRAM.
+ *
+ */
+#define INTEGRATOR_SSRAM_BASE           0x00000000
+#define INTEGRATOR_SSRAM_ALIAS_BASE     0x10800000
+#define INTEGRATOR_SSRAM_SIZE           SZ_256K
+
+#define INTEGRATOR_FLASH_BASE           0x24000000
+#define INTEGRATOR_FLASH_SIZE           SZ_32M
+
+#define INTEGRATOR_MBRD_SSRAM_BASE      0x28000000
+#define INTEGRATOR_MBRD_SSRAM_SIZE      SZ_512K
+
+/*
+ *  SDRAM is a SIMM therefore the size is not known.
+ */
+#define INTEGRATOR_SDRAM_BASE           0x00040000
+
+#define INTEGRATOR_SDRAM_ALIAS_BASE     0x80000000
+#define INTEGRATOR_HDR0_SDRAM_BASE      0x80000000
+#define INTEGRATOR_HDR1_SDRAM_BASE      0x90000000
+#define INTEGRATOR_HDR2_SDRAM_BASE      0xA0000000
+#define INTEGRATOR_HDR3_SDRAM_BASE      0xB0000000
+
+/*
+ *  Logic expansion modules
+ *
+ */
+#define INTEGRATOR_LOGIC_MODULES_BASE   0xC0000000
+#define INTEGRATOR_LOGIC_MODULE0_BASE   0xC0000000
+#define INTEGRATOR_LOGIC_MODULE1_BASE   0xD0000000
+#define INTEGRATOR_LOGIC_MODULE2_BASE   0xE0000000
+#define INTEGRATOR_LOGIC_MODULE3_BASE   0xF0000000
+
+/*
+ * Integrator header card registers
+ */
+#define INTEGRATOR_HDR_ID_OFFSET        0x00
+#define INTEGRATOR_HDR_PROC_OFFSET      0x04
+#define INTEGRATOR_HDR_OSC_OFFSET       0x08
+#define INTEGRATOR_HDR_CTRL_OFFSET      0x0C
+#define INTEGRATOR_HDR_STAT_OFFSET      0x10
+#define INTEGRATOR_HDR_LOCK_OFFSET      0x14
+#define INTEGRATOR_HDR_SDRAM_OFFSET     0x20
+#define INTEGRATOR_HDR_INIT_OFFSET      0x24	 /*  CM9x6 */
+#define INTEGRATOR_HDR_IC_OFFSET        0x40
+#define INTEGRATOR_HDR_SPDBASE_OFFSET   0x100
+#define INTEGRATOR_HDR_SPDTOP_OFFSET    0x200
+
+#define INTEGRATOR_HDR_BASE             0x10000000
+#define INTEGRATOR_HDR_ID               (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_ID_OFFSET)
+#define INTEGRATOR_HDR_PROC             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_PROC_OFFSET)
+#define INTEGRATOR_HDR_OSC              (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_OSC_OFFSET)
+#define INTEGRATOR_HDR_CTRL             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_CTRL_OFFSET)
+#define INTEGRATOR_HDR_STAT             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_STAT_OFFSET)
+#define INTEGRATOR_HDR_LOCK             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_LOCK_OFFSET)
+#define INTEGRATOR_HDR_SDRAM            (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SDRAM_OFFSET)
+#define INTEGRATOR_HDR_INIT             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_INIT_OFFSET)
+#define INTEGRATOR_HDR_IC               (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_IC_OFFSET)
+#define INTEGRATOR_HDR_SPDBASE          (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDBASE_OFFSET)
+#define INTEGRATOR_HDR_SPDTOP           (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDTOP_OFFSET)
+
+#define INTEGRATOR_HDR_CTRL_LED         0x01
+#define INTEGRATOR_HDR_CTRL_MBRD_DETECH 0x02
+#define INTEGRATOR_HDR_CTRL_REMAP       0x04
+#define INTEGRATOR_HDR_CTRL_RESET       0x08
+#define INTEGRATOR_HDR_CTRL_HIGHVECTORS 0x10
+#define INTEGRATOR_HDR_CTRL_BIG_ENDIAN  0x20
+#define INTEGRATOR_HDR_CTRL_FASTBUS     0x40
+#define INTEGRATOR_HDR_CTRL_SYNC        0x80
+
+#define INTEGRATOR_HDR_OSC_CORE_10MHz   0x102
+#define INTEGRATOR_HDR_OSC_CORE_15MHz   0x107
+#define INTEGRATOR_HDR_OSC_CORE_20MHz   0x10C
+#define INTEGRATOR_HDR_OSC_CORE_25MHz   0x111
+#define INTEGRATOR_HDR_OSC_CORE_30MHz   0x116
+#define INTEGRATOR_HDR_OSC_CORE_35MHz   0x11B
+#define INTEGRATOR_HDR_OSC_CORE_40MHz   0x120
+#define INTEGRATOR_HDR_OSC_CORE_45MHz   0x125
+#define INTEGRATOR_HDR_OSC_CORE_50MHz   0x12A
+#define INTEGRATOR_HDR_OSC_CORE_55MHz   0x12F
+#define INTEGRATOR_HDR_OSC_CORE_60MHz   0x134
+#define INTEGRATOR_HDR_OSC_CORE_65MHz   0x139
+#define INTEGRATOR_HDR_OSC_CORE_70MHz   0x13E
+#define INTEGRATOR_HDR_OSC_CORE_75MHz   0x143
+#define INTEGRATOR_HDR_OSC_CORE_80MHz   0x148
+#define INTEGRATOR_HDR_OSC_CORE_85MHz   0x14D
+#define INTEGRATOR_HDR_OSC_CORE_90MHz   0x152
+#define INTEGRATOR_HDR_OSC_CORE_95MHz   0x157
+#define INTEGRATOR_HDR_OSC_CORE_100MHz  0x15C
+#define INTEGRATOR_HDR_OSC_CORE_105MHz  0x161
+#define INTEGRATOR_HDR_OSC_CORE_110MHz  0x166
+#define INTEGRATOR_HDR_OSC_CORE_115MHz  0x16B
+#define INTEGRATOR_HDR_OSC_CORE_120MHz  0x170
+#define INTEGRATOR_HDR_OSC_CORE_125MHz  0x175
+#define INTEGRATOR_HDR_OSC_CORE_130MHz  0x17A
+#define INTEGRATOR_HDR_OSC_CORE_135MHz  0x17F
+#define INTEGRATOR_HDR_OSC_CORE_140MHz  0x184
+#define INTEGRATOR_HDR_OSC_CORE_145MHz  0x189
+#define INTEGRATOR_HDR_OSC_CORE_150MHz  0x18E
+#define INTEGRATOR_HDR_OSC_CORE_155MHz  0x193
+#define INTEGRATOR_HDR_OSC_CORE_160MHz  0x198
+#define INTEGRATOR_HDR_OSC_CORE_MASK    0x7FF
+
+#define INTEGRATOR_HDR_OSC_MEM_10MHz    0x10C000
+#define INTEGRATOR_HDR_OSC_MEM_15MHz    0x116000
+#define INTEGRATOR_HDR_OSC_MEM_20MHz    0x120000
+#define INTEGRATOR_HDR_OSC_MEM_25MHz    0x12A000
+#define INTEGRATOR_HDR_OSC_MEM_30MHz    0x134000
+#define INTEGRATOR_HDR_OSC_MEM_33MHz    0x13A000
+#define INTEGRATOR_HDR_OSC_MEM_40MHz    0x148000
+#define INTEGRATOR_HDR_OSC_MEM_50MHz    0x15C000
+#define INTEGRATOR_HDR_OSC_MEM_60MHz    0x170000
+#define INTEGRATOR_HDR_OSC_MEM_66MHz    0x17C000
+#define INTEGRATOR_HDR_OSC_MEM_MASK     0x7FF000
+
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM7x0  0x0
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x0  0x0800000
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x6  0x1000000
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM10x00  0x1800000
+#define INTEGRATOR_HDR_OSC_BUS_MODE_MASK  0x1800000
+
+#define INTEGRATOR_HDR_SDRAM_SPD_OK     (1 << 5)
+
+/*
+ * Integrator system registers
+ */
+
+/*
+ *  System Controller
+ */
+#define INTEGRATOR_SC_ID_OFFSET         0x00
+#define INTEGRATOR_SC_OSC_OFFSET        0x04
+#define INTEGRATOR_SC_CTRLS_OFFSET      0x08
+#define INTEGRATOR_SC_CTRLC_OFFSET      0x0C
+#define INTEGRATOR_SC_DEC_OFFSET        0x10
+#define INTEGRATOR_SC_ARB_OFFSET        0x14
+#define INTEGRATOR_SC_LOCK_OFFSET       0x1C
+
+#define INTEGRATOR_SC_BASE              0x11000000
+#define INTEGRATOR_SC_ID                (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ID_OFFSET)
+#define INTEGRATOR_SC_OSC               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_OSC_OFFSET)
+#define INTEGRATOR_SC_CTRLS             (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLS_OFFSET)
+#define INTEGRATOR_SC_CTRLC             (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLC_OFFSET)
+#define INTEGRATOR_SC_DEC               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_DEC_OFFSET)
+#define INTEGRATOR_SC_ARB               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ARB_OFFSET)
+#define INTEGRATOR_SC_PCIENABLE         (INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET)
+#define INTEGRATOR_SC_LOCK              (INTEGRATOR_SC_BASE + INTEGRATOR_SC_LOCK_OFFSET)
+
+#define INTEGRATOR_SC_OSC_SYS_10MHz     0x20
+#define INTEGRATOR_SC_OSC_SYS_15MHz     0x34
+#define INTEGRATOR_SC_OSC_SYS_20MHz     0x48
+#define INTEGRATOR_SC_OSC_SYS_25MHz     0x5C
+#define INTEGRATOR_SC_OSC_SYS_33MHz     0x7C
+#define INTEGRATOR_SC_OSC_SYS_MASK      0xFF
+
+#define INTEGRATOR_SC_OSC_PCI_25MHz     0x100
+#define INTEGRATOR_SC_OSC_PCI_33MHz     0x0
+#define INTEGRATOR_SC_OSC_PCI_MASK      0x100
+
+#define INTEGRATOR_SC_CTRL_SOFTRST      (1 << 0)
+#define INTEGRATOR_SC_CTRL_nFLVPPEN     (1 << 1)
+#define INTEGRATOR_SC_CTRL_nFLWP        (1 << 2)
+#define INTEGRATOR_SC_CTRL_URTS0        (1 << 4)
+#define INTEGRATOR_SC_CTRL_UDTR0        (1 << 5)
+#define INTEGRATOR_SC_CTRL_URTS1        (1 << 6)
+#define INTEGRATOR_SC_CTRL_UDTR1        (1 << 7)
+
+/*
+ *  External Bus Interface
+ */
+#define INTEGRATOR_EBI_BASE             0x12000000
+
+#define INTEGRATOR_EBI_CSR0_OFFSET      0x00
+#define INTEGRATOR_EBI_CSR1_OFFSET      0x04
+#define INTEGRATOR_EBI_CSR2_OFFSET      0x08
+#define INTEGRATOR_EBI_CSR3_OFFSET      0x0C
+#define INTEGRATOR_EBI_LOCK_OFFSET      0x20
+
+#define INTEGRATOR_EBI_CSR0             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR0_OFFSET)
+#define INTEGRATOR_EBI_CSR1             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET)
+#define INTEGRATOR_EBI_CSR2             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR2_OFFSET)
+#define INTEGRATOR_EBI_CSR3             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR3_OFFSET)
+#define INTEGRATOR_EBI_LOCK             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET)
+
+#define INTEGRATOR_EBI_8_BIT            0x00
+#define INTEGRATOR_EBI_16_BIT           0x01
+#define INTEGRATOR_EBI_32_BIT           0x02
+#define INTEGRATOR_EBI_WRITE_ENABLE     0x04
+#define INTEGRATOR_EBI_SYNC             0x08
+#define INTEGRATOR_EBI_WS_2             0x00
+#define INTEGRATOR_EBI_WS_3             0x10
+#define INTEGRATOR_EBI_WS_4             0x20
+#define INTEGRATOR_EBI_WS_5             0x30
+#define INTEGRATOR_EBI_WS_6             0x40
+#define INTEGRATOR_EBI_WS_7             0x50
+#define INTEGRATOR_EBI_WS_8             0x60
+#define INTEGRATOR_EBI_WS_9             0x70
+#define INTEGRATOR_EBI_WS_10            0x80
+#define INTEGRATOR_EBI_WS_11            0x90
+#define INTEGRATOR_EBI_WS_12            0xA0
+#define INTEGRATOR_EBI_WS_13            0xB0
+#define INTEGRATOR_EBI_WS_14            0xC0
+#define INTEGRATOR_EBI_WS_15            0xD0
+#define INTEGRATOR_EBI_WS_16            0xE0
+#define INTEGRATOR_EBI_WS_17            0xF0
+
+
+#define INTEGRATOR_CT_BASE              0x13000000	 /*  Counter/Timers */
+#define INTEGRATOR_IC_BASE              0x14000000	 /*  Interrupt Controller */
+#define INTEGRATOR_RTC_BASE             0x15000000	 /*  Real Time Clock */
+#define INTEGRATOR_UART0_BASE           0x16000000	 /*  UART 0 */
+#define INTEGRATOR_UART1_BASE           0x17000000	 /*  UART 1 */
+#define INTEGRATOR_KBD_BASE             0x18000000	 /*  Keyboard */
+#define INTEGRATOR_MOUSE_BASE           0x19000000	 /*  Mouse */
+
+/*
+ *  LED's & Switches
+ */
+#define INTEGRATOR_DBG_ALPHA_OFFSET     0x00
+#define INTEGRATOR_DBG_LEDS_OFFSET      0x04
+#define INTEGRATOR_DBG_SWITCH_OFFSET    0x08
+
+#define INTEGRATOR_DBG_BASE             0x1A000000
+#define INTEGRATOR_DBG_ALPHA            (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_ALPHA_OFFSET)
+#define INTEGRATOR_DBG_LEDS             (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_LEDS_OFFSET)
+#define INTEGRATOR_DBG_SWITCH           (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET)
+
+#define INTEGRATOR_AP_GPIO_BASE		0x1B000000	/* GPIO */
+
+#define INTEGRATOR_CP_MMC_BASE		0x1C000000	/* MMC */
+#define INTEGRATOR_CP_AACI_BASE		0x1D000000	/* AACI */
+#define INTEGRATOR_CP_ETH_BASE		0xC8000000	/* Ethernet */
+#define INTEGRATOR_CP_GPIO_BASE		0xC9000000	/* GPIO */
+#define INTEGRATOR_CP_SIC_BASE		0xCA000000	/* SIC */
+#define INTEGRATOR_CP_CTL_BASE		0xCB000000	/* CP system control */
+
+/* PS2 Keyboard interface */
+#define KMI0_BASE                       INTEGRATOR_KBD_BASE
+
+/* PS2 Mouse interface */
+#define KMI1_BASE                       INTEGRATOR_MOUSE_BASE
+
+/*
+ * Integrator Interrupt Controllers
+ *
+ *
+ * Offsets from interrupt controller base
+ *
+ * System Controller interrupt controller base is
+ *
+ * 	INTEGRATOR_IC_BASE + (header_number << 6)
+ *
+ * Core Module interrupt controller base is
+ *
+ * 	INTEGRATOR_HDR_IC
+ */
+#define IRQ_STATUS                      0
+#define IRQ_RAW_STATUS                  0x04
+#define IRQ_ENABLE                      0x08
+#define IRQ_ENABLE_SET                  0x08
+#define IRQ_ENABLE_CLEAR                0x0C
+
+#define INT_SOFT_SET                    0x10
+#define INT_SOFT_CLEAR                  0x14
+
+#define FIQ_STATUS                      0x20
+#define FIQ_RAW_STATUS                  0x24
+#define FIQ_ENABLE                      0x28
+#define FIQ_ENABLE_SET                  0x28
+#define FIQ_ENABLE_CLEAR                0x2C
+
+
+/*
+ * LED's
+ */
+#define GREEN_LED                       0x01
+#define YELLOW_LED                      0x02
+#define RED_LED                         0x04
+#define GREEN_LED_2                     0x08
+#define ALL_LEDS                        0x0F
+
+#define LED_BANK                        INTEGRATOR_DBG_LEDS
+
+/*
+ *  Timer definitions
+ *
+ *  Only use timer 1 & 2
+ *  (both run at 24MHz and will need the clock divider set to 16).
+ *
+ *  Timer 0 runs at bus frequency
+ */
+#define INTEGRATOR_TIMER0_BASE          INTEGRATOR_CT_BASE
+#define INTEGRATOR_TIMER1_BASE          (INTEGRATOR_CT_BASE + 0x100)
+#define INTEGRATOR_TIMER2_BASE          (INTEGRATOR_CT_BASE + 0x200)
+
+#define INTEGRATOR_CSR_BASE             0x10000000
+#define INTEGRATOR_CSR_SIZE             0x10000000
+
+#endif /* INTEGRATOR_HARDWARE_H */
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
new file mode 100644
index 000000000..0f916c245
--- /dev/null
+++ b/arch/arm/mach-integrator/impd1.c
@@ -0,0 +1,481 @@
+/*
+ *  linux/arch/arm/mach-integrator/impd1.c
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file provides the core support for the IM-PD1 module.
+ *
+ * Module / boot parameters.
+ *   lmid=n   impd1.lmid=n - set the logic module position in stack to 'n'
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/amba/mmci.h>
+#include <linux/io.h>
+#include <linux/platform_data/clk-integrator.h>
+#include <linux/slab.h>
+#include <linux/irqchip/arm-vic.h>
+#include <linux/gpio/machine.h>
+
+#include <asm/sizes.h>
+#include "lm.h"
+#include "impd1.h"
+
+static int module_id;
+
+module_param_named(lmid, module_id, int, 0444);
+MODULE_PARM_DESC(lmid, "logic module stack position");
+
+struct impd1_module {
+	void __iomem	*base;
+	void __iomem	*vic_base;
+};
+
+void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
+{
+	struct impd1_module *impd1 = dev_get_drvdata(dev);
+	u32 cur;
+
+	val &= mask;
+	cur = readl(impd1->base + IMPD1_CTRL) & ~mask;
+	writel(cur | val, impd1->base + IMPD1_CTRL);
+}
+
+EXPORT_SYMBOL(impd1_tweak_control);
+
+/*
+ * MMC support
+ */
+static struct mmci_platform_data mmc_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+};
+
+/*
+ * CLCD support
+ */
+#define PANEL		PROSPECTOR
+
+#define LTM10C209		1
+#define PROSPECTOR		2
+#define SVGA			3
+#define VGA			4
+
+#if PANEL == VGA
+#define PANELTYPE	vga
+static struct clcd_panel vga = {
+	.mode		= {
+		.name		= "VGA",
+		.refresh	= 60,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 39721,
+		.left_margin	= 40,
+		.right_margin	= 24,
+		.upper_margin	= 32,
+		.lower_margin	= 11,
+		.hsync_len	= 96,
+		.vsync_len	= 2,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD | TIM2_IPC,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.caps		= CLCD_CAP_5551,
+	.connector	= IMPD1_CTRL_DISP_VGA,
+	.bpp		= 16,
+	.grayscale	= 0,
+};
+
+#elif PANEL == SVGA
+#define PANELTYPE	svga
+static struct clcd_panel svga = {
+	.mode		= {
+		.name		= "SVGA",
+		.refresh	= 0,
+		.xres		= 800,
+		.yres		= 600,
+		.pixclock	= 27778,
+		.left_margin	= 20,
+		.right_margin	= 20,
+		.upper_margin	= 5,
+		.lower_margin	= 5,
+		.hsync_len	= 164,
+		.vsync_len	= 62,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.connector	= IMPD1_CTRL_DISP_VGA,
+	.caps		= CLCD_CAP_5551,
+	.bpp		= 16,
+	.grayscale	= 0,
+};
+
+#elif PANEL == PROSPECTOR
+#define PANELTYPE	prospector
+static struct clcd_panel prospector = {
+	.mode		= {
+		.name		= "PROSPECTOR",
+		.refresh	= 0,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 40000,
+		.left_margin	= 33,
+		.right_margin	= 64,
+		.upper_margin	= 36,
+		.lower_margin	= 7,
+		.hsync_len	= 64,
+		.vsync_len	= 25,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.caps		= CLCD_CAP_5551,
+	.fixedtimings	= 1,
+	.connector	= IMPD1_CTRL_DISP_LCD,
+	.bpp		= 16,
+	.grayscale	= 0,
+};
+
+#elif PANEL == LTM10C209
+#define PANELTYPE	ltm10c209
+/*
+ * Untested.
+ */
+static struct clcd_panel ltm10c209 = {
+	.mode		= {
+		.name		= "LTM10C209",
+		.refresh	= 0,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 40000,
+		.left_margin	= 20,
+		.right_margin	= 20,
+		.upper_margin	= 19,
+		.lower_margin	= 19,
+		.hsync_len	= 20,
+		.vsync_len	= 10,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.caps		= CLCD_CAP_5551,
+	.fixedtimings	= 1,
+	.connector	= IMPD1_CTRL_DISP_LCD,
+	.bpp		= 16,
+	.grayscale	= 0,
+};
+#endif
+
+/*
+ * Disable all display connectors on the interface module.
+ */
+static void impd1fb_clcd_disable(struct clcd_fb *fb)
+{
+	impd1_tweak_control(fb->dev->dev.parent, IMPD1_CTRL_DISP_MASK, 0);
+}
+
+/*
+ * Enable the relevant connector on the interface module.
+ */
+static void impd1fb_clcd_enable(struct clcd_fb *fb)
+{
+	impd1_tweak_control(fb->dev->dev.parent, IMPD1_CTRL_DISP_MASK,
+			fb->panel->connector | IMPD1_CTRL_DISP_ENABLE);
+}
+
+static int impd1fb_clcd_setup(struct clcd_fb *fb)
+{
+	unsigned long framebase = fb->dev->res.start + 0x01000000;
+	unsigned long framesize = SZ_1M;
+	int ret = 0;
+
+	fb->panel = &PANELTYPE;
+
+	if (!request_mem_region(framebase, framesize, "clcd framebuffer")) {
+		printk(KERN_ERR "IM-PD1: unable to reserve framebuffer\n");
+		return -EBUSY;
+	}
+
+	fb->fb.screen_base = ioremap(framebase, framesize);
+	if (!fb->fb.screen_base) {
+		printk(KERN_ERR "IM-PD1: unable to map framebuffer\n");
+		ret = -ENOMEM;
+		goto free_buffer;
+	}
+
+	fb->fb.fix.smem_start	= framebase;
+	fb->fb.fix.smem_len	= framesize;
+
+	return 0;
+
+ free_buffer:
+	release_mem_region(framebase, framesize);
+	return ret;
+}
+
+static int impd1fb_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+	unsigned long start, size;
+
+	start = vma->vm_pgoff + (fb->fb.fix.smem_start >> PAGE_SHIFT);
+	size = vma->vm_end - vma->vm_start;
+
+	return remap_pfn_range(vma, vma->vm_start, start, size,
+			       vma->vm_page_prot);
+}
+
+static void impd1fb_clcd_remove(struct clcd_fb *fb)
+{
+	iounmap(fb->fb.screen_base);
+	release_mem_region(fb->fb.fix.smem_start, fb->fb.fix.smem_len);
+}
+
+static struct clcd_board impd1_clcd_data = {
+	.name		= "IM-PD/1",
+	.caps		= CLCD_CAP_5551 | CLCD_CAP_888,
+	.check		= clcdfb_check,
+	.decode		= clcdfb_decode,
+	.disable	= impd1fb_clcd_disable,
+	.enable		= impd1fb_clcd_enable,
+	.setup		= impd1fb_clcd_setup,
+	.mmap		= impd1fb_clcd_mmap,
+	.remove		= impd1fb_clcd_remove,
+};
+
+struct impd1_device {
+	unsigned long	offset;
+	unsigned int	irq[2];
+	unsigned int	id;
+	void		*platform_data;
+};
+
+static struct impd1_device impd1_devs[] = {
+	{
+		.offset	= 0x00100000,
+		.irq	= { 1 },
+		.id	= 0x00141011,
+	}, {
+		.offset	= 0x00200000,
+		.irq	= { 2 },
+		.id	= 0x00141011,
+	}, {
+		.offset	= 0x00300000,
+		.irq	= { 3 },
+		.id	= 0x00041022,
+	}, {
+		.offset	= 0x00400000,
+		.irq	= { 4 },
+		.id	= 0x00041061,
+	}, {
+		.offset	= 0x00500000,
+		.irq	= { 5 },
+		.id	= 0x00041061,
+	}, {
+		.offset	= 0x00600000,
+		.irq	= { 6 },
+		.id	= 0x00041130,
+	}, {
+		.offset	= 0x00700000,
+		.irq	= { 7, 8 },
+		.id	= 0x00041181,
+		.platform_data = &mmc_data,
+	}, {
+		.offset	= 0x00800000,
+		.irq	= { 9 },
+		.id	= 0x00041041,
+	}, {
+		.offset	= 0x01000000,
+		.irq	= { 11 },
+		.id	= 0x00041110,
+		.platform_data = &impd1_clcd_data,
+	}
+};
+
+/*
+ * Valid IRQs: 0 thru 9 and 11, 10 unused.
+ */
+#define IMPD1_VALID_IRQS 0x00000bffU
+
+/*
+ * As this module is bool, it is OK to have this as __ref() - no
+ * probe calls will be done after the initial system bootup, as devices
+ * are discovered as part of the machine startup.
+ */
+static int __ref impd1_probe(struct lm_device *dev)
+{
+	struct impd1_module *impd1;
+	int irq_base;
+	int i;
+
+	if (dev->id != module_id)
+		return -EINVAL;
+
+	if (!devm_request_mem_region(&dev->dev, dev->resource.start,
+				     SZ_4K, "LM registers"))
+		return -EBUSY;
+
+	impd1 = devm_kzalloc(&dev->dev, sizeof(struct impd1_module),
+			     GFP_KERNEL);
+	if (!impd1)
+		return -ENOMEM;
+
+	impd1->base = devm_ioremap(&dev->dev, dev->resource.start, SZ_4K);
+	if (!impd1->base)
+		return -ENOMEM;
+
+	integrator_impd1_clk_init(impd1->base, dev->id);
+
+	if (!devm_request_mem_region(&dev->dev,
+				     dev->resource.start + 0x03000000,
+				     SZ_4K, "VIC"))
+		return -EBUSY;
+
+	impd1->vic_base = devm_ioremap(&dev->dev,
+				       dev->resource.start + 0x03000000,
+				       SZ_4K);
+	if (!impd1->vic_base)
+		return -ENOMEM;
+
+	irq_base = vic_init_cascaded(impd1->vic_base, dev->irq,
+				     IMPD1_VALID_IRQS, 0);
+
+	lm_set_drvdata(dev, impd1);
+
+	dev_info(&dev->dev, "IM-PD1 found at 0x%08lx\n",
+		 (unsigned long)dev->resource.start);
+
+	for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) {
+		struct impd1_device *idev = impd1_devs + i;
+		struct amba_device *d;
+		unsigned long pc_base;
+		char devname[32];
+		int irq1 = idev->irq[0];
+		int irq2 = idev->irq[1];
+
+		/* Translate IRQs to IM-PD1 local numberspace */
+		if (irq1)
+			irq1 += irq_base;
+		if (irq2)
+			irq2 += irq_base;
+
+		pc_base = dev->resource.start + idev->offset;
+		snprintf(devname, 32, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
+
+		/* Add GPIO descriptor lookup table for the PL061 block */
+		if (idev->offset == 0x00400000) {
+			struct gpiod_lookup_table *lookup;
+			char *chipname;
+			char *mmciname;
+
+			lookup = devm_kzalloc(&dev->dev,
+					      sizeof(*lookup) + 3 * sizeof(struct gpiod_lookup),
+					      GFP_KERNEL);
+			chipname = devm_kstrdup(&dev->dev, devname, GFP_KERNEL);
+			mmciname = devm_kasprintf(&dev->dev, GFP_KERNEL,
+						  "lm%x:00700", dev->id);
+			if (!lookup || !chipname || !mmciname)
+				return -ENOMEM;
+
+			lookup->dev_id = mmciname;
+			/*
+			 * Offsets on GPIO block 1:
+			 * 3 = MMC WP (write protect)
+			 * 4 = MMC CD (card detect)
+			 *
+			 * Offsets on GPIO block 2:
+			 * 0 = Up key
+			 * 1 = Down key
+			 * 2 = Left key
+			 * 3 = Right key
+			 * 4 = Key lower left
+			 * 5 = Key lower right
+			 */
+			/* We need the two MMCI GPIO entries */
+			lookup->table[0].chip_label = chipname;
+			lookup->table[0].chip_hwnum = 3;
+			lookup->table[0].con_id = "wp";
+			lookup->table[1].chip_label = chipname;
+			lookup->table[1].chip_hwnum = 4;
+			lookup->table[1].con_id = "cd";
+			lookup->table[1].flags = GPIO_ACTIVE_LOW;
+			gpiod_add_lookup_table(lookup);
+		}
+
+		d = amba_ahb_device_add_res(&dev->dev, devname, pc_base, SZ_4K,
+					    irq1, irq2,
+					    idev->platform_data, idev->id,
+					    &dev->resource);
+		if (IS_ERR(d)) {
+			dev_err(&dev->dev, "unable to register device: %ld\n", PTR_ERR(d));
+			continue;
+		}
+	}
+
+	return 0;
+}
+
+static int impd1_remove_one(struct device *dev, void *data)
+{
+	device_unregister(dev);
+	return 0;
+}
+
+static void impd1_remove(struct lm_device *dev)
+{
+	device_for_each_child(&dev->dev, NULL, impd1_remove_one);
+	integrator_impd1_clk_exit(dev->id);
+
+	lm_set_drvdata(dev, NULL);
+}
+
+static struct lm_driver impd1_driver = {
+	.drv = {
+		.name	= "impd1",
+		/*
+		 * As we're dropping the probe() function, suppress driver
+		 * binding from sysfs.
+		 */
+		.suppress_bind_attrs = true,
+	},
+	.probe		= impd1_probe,
+	.remove		= impd1_remove,
+};
+
+static int __init impd1_init(void)
+{
+	return lm_driver_register(&impd1_driver);
+}
+
+static void __exit impd1_exit(void)
+{
+	lm_driver_unregister(&impd1_driver);
+}
+
+module_init(impd1_init);
+module_exit(impd1_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Integrator/IM-PD1 logic module core driver");
+MODULE_AUTHOR("Deep Blue Solutions Ltd");
diff --git a/arch/arm/mach-integrator/impd1.h b/arch/arm/mach-integrator/impd1.h
new file mode 100644
index 000000000..36124d34c
--- /dev/null
+++ b/arch/arm/mach-integrator/impd1.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#define IMPD1_LEDS	0x0c
+#define IMPD1_INT	0x10
+#define IMPD1_SW	0x14
+#define IMPD1_CTRL	0x18
+
+#define IMPD1_CTRL_DISP_LCD	(0 << 0)
+#define IMPD1_CTRL_DISP_VGA	(1 << 0)
+#define IMPD1_CTRL_DISP_LCD1	(2 << 0)
+#define IMPD1_CTRL_DISP_ENABLE	(1 << 2)
+#define IMPD1_CTRL_DISP_MASK	(7 << 0)
+
+struct device;
+
+void impd1_tweak_control(struct device *dev, u32 mask, u32 val);
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
new file mode 100644
index 000000000..8efe484fa
--- /dev/null
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -0,0 +1,246 @@
+/*
+ *  linux/arch/arm/mach-integrator/integrator_ap.c
+ *
+ *  Copyright (C) 2000-2003 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/syscore_ops.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/termios.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "hardware.h"
+#include "cm.h"
+#include "common.h"
+#include "lm.h"
+
+/* Regmap to the AP system controller */
+static struct regmap *ap_syscon_map;
+
+/*
+ * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
+ * is the (PA >> 12).
+ *
+ * Setup a VA for the Integrator interrupt controller (for header #0,
+ * just for now).
+ */
+#define VA_IC_BASE	__io_address(INTEGRATOR_IC_BASE)
+
+/*
+ * Logical      Physical
+ * f1400000	14000000	Interrupt controller
+ * f1600000	16000000	UART 0
+ */
+
+static struct map_desc ap_io_desc[] __initdata __maybe_unused = {
+	{
+		.virtual	= IO_ADDRESS(INTEGRATOR_IC_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_IC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_UART0_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}
+};
+
+static void __init ap_map_io(void)
+{
+	iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
+}
+
+#ifdef CONFIG_PM
+static unsigned long ic_irq_enable;
+
+static int irq_suspend(void)
+{
+	ic_irq_enable = readl(VA_IC_BASE + IRQ_ENABLE);
+	return 0;
+}
+
+static void irq_resume(void)
+{
+	/* disable all irq sources */
+	cm_clear_irqs();
+	writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
+	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
+
+	writel(ic_irq_enable, VA_IC_BASE + IRQ_ENABLE_SET);
+}
+#else
+#define irq_suspend NULL
+#define irq_resume NULL
+#endif
+
+static struct syscore_ops irq_syscore_ops = {
+	.suspend	= irq_suspend,
+	.resume		= irq_resume,
+};
+
+static int __init irq_syscore_init(void)
+{
+	register_syscore_ops(&irq_syscore_ops);
+
+	return 0;
+}
+
+device_initcall(irq_syscore_init);
+
+/*
+ * For the PL010 found in the Integrator/AP some of the UART control is
+ * implemented in the system controller and accessed using a callback
+ * from the driver.
+ */
+static void integrator_uart_set_mctrl(struct amba_device *dev,
+				void __iomem *base, unsigned int mctrl)
+{
+	unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask;
+	u32 phybase = dev->res.start;
+	int ret;
+
+	if (phybase == INTEGRATOR_UART0_BASE) {
+		/* UART0 */
+		rts_mask = 1 << 4;
+		dtr_mask = 1 << 5;
+	} else {
+		/* UART1 */
+		rts_mask = 1 << 6;
+		dtr_mask = 1 << 7;
+	}
+
+	if (mctrl & TIOCM_RTS)
+		ctrlc |= rts_mask;
+	else
+		ctrls |= rts_mask;
+
+	if (mctrl & TIOCM_DTR)
+		ctrlc |= dtr_mask;
+	else
+		ctrls |= dtr_mask;
+
+	ret = regmap_write(ap_syscon_map,
+			   INTEGRATOR_SC_CTRLS_OFFSET,
+			   ctrls);
+	if (ret)
+		pr_err("MODEM: unable to write PL010 UART CTRLS\n");
+
+	ret = regmap_write(ap_syscon_map,
+			   INTEGRATOR_SC_CTRLC_OFFSET,
+			   ctrlc);
+	if (ret)
+		pr_err("MODEM: unable to write PL010 UART CRTLC\n");
+}
+
+struct amba_pl010_data ap_uart_data = {
+	.set_mctrl = integrator_uart_set_mctrl,
+};
+
+void __init ap_init_early(void)
+{
+}
+
+static void __init ap_init_irq_of(void)
+{
+	cm_init();
+	irqchip_init();
+}
+
+/* For the Device Tree, add in the UART callbacks as AUXDATA */
+static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
+		"uart0", &ap_uart_data),
+	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
+		"uart1", &ap_uart_data),
+	{ /* sentinel */ },
+};
+
+static const struct of_device_id ap_syscon_match[] = {
+	{ .compatible = "arm,integrator-ap-syscon"},
+	{ },
+};
+
+static void __init ap_init_of(void)
+{
+	u32 sc_dec;
+	struct device_node *syscon;
+	int ret;
+	int i;
+
+	of_platform_default_populate(NULL, ap_auxdata_lookup, NULL);
+
+	syscon = of_find_matching_node(NULL, ap_syscon_match);
+	if (!syscon)
+		return;
+	ap_syscon_map = syscon_node_to_regmap(syscon);
+	if (IS_ERR(ap_syscon_map)) {
+		pr_crit("could not find Integrator/AP system controller\n");
+		return;
+	}
+
+	ret = regmap_read(ap_syscon_map,
+			  INTEGRATOR_SC_DEC_OFFSET,
+			  &sc_dec);
+	if (ret) {
+		pr_crit("could not read from Integrator/AP syscon\n");
+		return;
+	}
+
+	for (i = 0; i < 4; i++) {
+		struct lm_device *lmdev;
+
+		if ((sc_dec & (16 << i)) == 0)
+			continue;
+
+		lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
+		if (!lmdev)
+			continue;
+
+		lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
+		lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
+		lmdev->resource.flags = IORESOURCE_MEM;
+		lmdev->irq = irq_of_parse_and_map(syscon, i);
+		lmdev->id = i;
+
+		lm_device_register(lmdev);
+	}
+}
+
+static const char * ap_dt_board_compat[] = {
+	"arm,integrator-ap",
+	NULL,
+};
+
+DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)")
+	.reserve	= integrator_reserve,
+	.map_io		= ap_map_io,
+	.init_early	= ap_init_early,
+	.init_irq	= ap_init_irq_of,
+	.init_machine	= ap_init_of,
+	.dt_compat      = ap_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
new file mode 100644
index 000000000..772a7cf20
--- /dev/null
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -0,0 +1,152 @@
+/*
+ *  linux/arch/arm/mach-integrator/integrator_cp.c
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+#include <linux/kernel.h>
+#include <linux/amba/mmci.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/sched_clock.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "hardware.h"
+#include "cm.h"
+#include "common.h"
+
+/* Base address to the core module header */
+static struct regmap *cm_map;
+/* Base address to the CP controller */
+static void __iomem *intcp_con_base;
+
+#define CM_COUNTER_OFFSET 0x28
+
+/*
+ * Logical      Physical
+ * f1400000	14000000	Interrupt controller
+ * f1600000	16000000	UART 0
+ * fca00000	ca000000	SIC
+ */
+
+static struct map_desc intcp_io_desc[] __initdata __maybe_unused = {
+	{
+		.virtual	= IO_ADDRESS(INTEGRATOR_IC_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_IC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_UART0_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_CP_SIC_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_CP_SIC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}
+};
+
+static void __init intcp_map_io(void)
+{
+	iotable_init(intcp_io_desc, ARRAY_SIZE(intcp_io_desc));
+}
+
+/*
+ * It seems that the card insertion interrupt remains active after
+ * we've acknowledged it.  We therefore ignore the interrupt, and
+ * rely on reading it from the SIC.  This also means that we must
+ * clear the latched interrupt.
+ */
+static unsigned int mmc_status(struct device *dev)
+{
+	unsigned int status = readl(__io_address(0xca000000 + 4));
+	writel(8, intcp_con_base + 8);
+
+	return status & 8;
+}
+
+static struct mmci_platform_data mmc_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
+};
+
+static u64 notrace intcp_read_sched_clock(void)
+{
+	unsigned int val;
+
+	/* MMIO so discard return code */
+	regmap_read(cm_map, CM_COUNTER_OFFSET, &val);
+	return val;
+}
+
+static void __init intcp_init_early(void)
+{
+	cm_map = syscon_regmap_lookup_by_compatible("arm,core-module-integrator");
+	if (IS_ERR(cm_map))
+		return;
+	sched_clock_register(intcp_read_sched_clock, 32, 24000000);
+}
+
+static void __init intcp_init_irq_of(void)
+{
+	cm_init();
+	irqchip_init();
+}
+
+/*
+ * For the Device Tree, add in the UART, MMC and CLCD specifics as AUXDATA
+ * and enforce the bus names since these are used for clock lookups.
+ */
+static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_MMC_BASE,
+		"mmci", &mmc_data),
+	{ /* sentinel */ },
+};
+
+static const struct of_device_id intcp_syscon_match[] = {
+	{ .compatible = "arm,integrator-cp-syscon"},
+	{ },
+};
+
+static void __init intcp_init_of(void)
+{
+	struct device_node *cpcon;
+
+	cpcon = of_find_matching_node(NULL, intcp_syscon_match);
+	if (!cpcon)
+		return;
+
+	intcp_con_base = of_iomap(cpcon, 0);
+	if (!intcp_con_base)
+		return;
+
+	of_platform_default_populate(NULL, intcp_auxdata_lookup, NULL);
+}
+
+static const char * intcp_dt_board_compat[] = {
+	"arm,integrator-cp",
+	NULL,
+};
+
+DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)")
+	.reserve	= integrator_reserve,
+	.map_io		= intcp_map_io,
+	.init_early	= intcp_init_early,
+	.init_irq	= intcp_init_irq_of,
+	.init_machine	= intcp_init_of,
+	.dt_compat      = intcp_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-integrator/lm.c b/arch/arm/mach-integrator/lm.c
new file mode 100644
index 000000000..3f9e9f043
--- /dev/null
+++ b/arch/arm/mach-integrator/lm.c
@@ -0,0 +1,99 @@
+/*
+ *  linux/arch/arm/mach-integrator/lm.c
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+
+#include "lm.h"
+
+#define to_lm_device(d)	container_of(d, struct lm_device, dev)
+#define to_lm_driver(d)	container_of(d, struct lm_driver, drv)
+
+static int lm_match(struct device *dev, struct device_driver *drv)
+{
+	return 1;
+}
+
+static int lm_bus_probe(struct device *dev)
+{
+	struct lm_device *lmdev = to_lm_device(dev);
+	struct lm_driver *lmdrv = to_lm_driver(dev->driver);
+
+	return lmdrv->probe(lmdev);
+}
+
+static int lm_bus_remove(struct device *dev)
+{
+	struct lm_device *lmdev = to_lm_device(dev);
+	struct lm_driver *lmdrv = to_lm_driver(dev->driver);
+
+	if (lmdrv->remove)
+		lmdrv->remove(lmdev);
+	return 0;
+}
+
+static struct bus_type lm_bustype = {
+	.name		= "logicmodule",
+	.match		= lm_match,
+	.probe		= lm_bus_probe,
+	.remove		= lm_bus_remove,
+//	.suspend	= lm_bus_suspend,
+//	.resume		= lm_bus_resume,
+};
+
+static int __init lm_init(void)
+{
+	return bus_register(&lm_bustype);
+}
+
+postcore_initcall(lm_init);
+
+int lm_driver_register(struct lm_driver *drv)
+{
+	drv->drv.bus = &lm_bustype;
+	return driver_register(&drv->drv);
+}
+
+void lm_driver_unregister(struct lm_driver *drv)
+{
+	driver_unregister(&drv->drv);
+}
+
+static void lm_device_release(struct device *dev)
+{
+	struct lm_device *d = to_lm_device(dev);
+
+	kfree(d);
+}
+
+int lm_device_register(struct lm_device *dev)
+{
+	int ret;
+
+	dev->dev.release = lm_device_release;
+	dev->dev.bus = &lm_bustype;
+
+	ret = dev_set_name(&dev->dev, "lm%d", dev->id);
+	if (ret)
+		return ret;
+	dev->resource.name = dev_name(&dev->dev);
+
+	ret = request_resource(&iomem_resource, &dev->resource);
+	if (ret == 0) {
+		ret = device_register(&dev->dev);
+		if (ret)
+			release_resource(&dev->resource);
+	}
+	return ret;
+}
+
+EXPORT_SYMBOL(lm_driver_register);
+EXPORT_SYMBOL(lm_driver_unregister);
diff --git a/arch/arm/mach-integrator/lm.h b/arch/arm/mach-integrator/lm.h
new file mode 100644
index 000000000..172966a69
--- /dev/null
+++ b/arch/arm/mach-integrator/lm.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+struct lm_device {
+	struct device		dev;
+	struct resource		resource;
+	unsigned int		irq;
+	unsigned int		id;
+};
+
+struct lm_driver {
+	struct device_driver	drv;
+	int			(*probe)(struct lm_device *);
+	void			(*remove)(struct lm_device *);
+	int			(*suspend)(struct lm_device *, pm_message_t);
+	int			(*resume)(struct lm_device *);
+};
+
+int lm_driver_register(struct lm_driver *drv);
+void lm_driver_unregister(struct lm_driver *drv);
+
+int lm_device_register(struct lm_device *dev);
+
+#define lm_get_drvdata(lm)	dev_get_drvdata(&(lm)->dev)
+#define lm_set_drvdata(lm,d)	dev_set_drvdata(&(lm)->dev, d)