Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

21 files changed, 1763 insertions, 0 deletions

diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig
new file mode 100644
index 000000000..f1f342cb0
--- /dev/null
+++ b/arch/arm/mach-iop32x/Kconfig
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0
+if ARCH_IOP32X
+
+menu "IOP32x Implementation Options"
+
+comment "IOP32x Platform Types"
+
+config MACH_EP80219
+	bool
+
+config MACH_GLANTANK
+	bool "Enable support for the IO-Data GLAN Tank"
+	help
+	  Say Y here if you want to run your kernel on the GLAN Tank
+	  NAS appliance or machines from IO-Data's HDL-Gxxx, HDL-GWxxx
+	  and HDL-GZxxx series.
+
+config ARCH_IQ80321
+	bool "Enable support for IQ80321"
+	help
+	  Say Y here if you want to run your kernel on the Intel IQ80321
+	  evaluation kit for the IOP321 processor.
+
+config ARCH_IQ31244
+	bool "Enable support for EP80219/IQ31244"
+	select MACH_EP80219
+	help
+	  Say Y here if you want to run your kernel on the Intel EP80219
+	  evaluation kit for the Intel 80219 processor (a IOP321 variant)
+	  or the IQ31244 evaluation kit for the IOP321 processor.
+
+config MACH_N2100
+	bool "Enable support for the Thecus n2100"
+	help
+	  Say Y here if you want to run your kernel on the Thecus n2100
+	  NAS appliance.
+
+config MACH_EM7210
+	bool "Enable support for the Lanner EM7210"
+	help
+	  Say Y here if you want to run your kernel on the Lanner EM7210
+	  board. Say also Y here if you have a SS4000e Baxter Creek NAS
+	  appliance."
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile
new file mode 100644
index 000000000..71d62447d
--- /dev/null
+++ b/arch/arm/mach-iop32x/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the linux kernel.
+#
+
+obj-y			:= irq.o
+
+obj-$(CONFIG_MACH_GLANTANK) += glantank.o
+obj-$(CONFIG_ARCH_IQ80321) += iq80321.o
+obj-$(CONFIG_ARCH_IQ31244) += iq31244.o
+obj-$(CONFIG_MACH_N2100) += n2100.o
+obj-$(CONFIG_MACH_EM7210) += em7210.o
diff --git a/arch/arm/mach-iop32x/Makefile.boot b/arch/arm/mach-iop32x/Makefile.boot
new file mode 100644
index 000000000..0a833b11e
--- /dev/null
+++ b/arch/arm/mach-iop32x/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	+= 0xa0008000
+params_phys-y	:= 0xa0000100
+initrd_phys-y	:= 0xa0800000
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
new file mode 100644
index 000000000..77e1ff057
--- /dev/null
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -0,0 +1,231 @@
+/*
+ * arch/arm/mach-iop32x/em7210.c
+ *
+ * Board support code for the Lanner EM7210 platforms.
+ *
+ * Based on arch/arm/mach-iop32x/iq31244.c file.
+ *
+ * Copyright (C) 2007 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <mach/time.h>
+#include "gpio-iop32x.h"
+
+static void __init em7210_timer_init(void)
+{
+	/* http://www.kwaak.net/fotos/fotos-nas/slide_24.html */
+	/* 33.333 MHz crystal.                                */
+	iop_init_time(200000000);
+}
+
+/*
+ * EM7210 RTC
+ */
+static struct i2c_board_info __initdata em7210_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rs5c372a", 0x32),
+	},
+};
+
+/*
+ * EM7210 I/O
+ */
+static struct map_desc em7210_io_desc[] __initdata = {
+	{	/* on-board devices */
+		.virtual	= IQ31244_UART,
+		.pfn		= __phys_to_pfn(IQ31244_UART),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init em7210_map_io(void)
+{
+	iop3xx_map_io();
+	iotable_init(em7210_io_desc, ARRAY_SIZE(em7210_io_desc));
+}
+
+
+/*
+ * EM7210 PCI
+ */
+#define INTA	IRQ_IOP32X_XINT0
+#define INTB	IRQ_IOP32X_XINT1
+#define INTC	IRQ_IOP32X_XINT2
+#define INTD	IRQ_IOP32X_XINT3
+
+static int __init
+em7210_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static int pci_irq_table[][4] = {
+		/*
+		 * PCI IDSEL/INTPIN->INTLINE
+		 * A       B       C       D
+		 */
+		{INTB, INTB, INTB, INTB}, /* console / uart */
+		{INTA, INTA, INTA, INTA}, /* 1st 82541      */
+		{INTD, INTD, INTD, INTD}, /* 2nd 82541      */
+		{INTC, INTC, INTC, INTC}, /* GD31244        */
+		{INTD, INTA, INTA, INTA}, /* mini-PCI       */
+		{INTD, INTC, INTA, INTA}, /* NEC USB        */
+	};
+
+	if (pin < 1 || pin > 4)
+		return -1;
+
+	return pci_irq_table[slot % 6][pin - 1];
+}
+
+static struct hw_pci em7210_pci __initdata = {
+	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
+	.setup		= iop3xx_pci_setup,
+	.preinit	= iop3xx_pci_preinit,
+	.map_irq	= em7210_pci_map_irq,
+};
+
+static int __init em7210_pci_init(void)
+{
+	if (machine_is_em7210())
+		pci_common_init(&em7210_pci);
+
+	return 0;
+}
+
+subsys_initcall(em7210_pci_init);
+
+
+/*
+ * EM7210 Flash
+ */
+static struct physmap_flash_data em7210_flash_data = {
+	.width		= 2,
+};
+
+static struct resource em7210_flash_resource = {
+	.start		= 0xf0000000,
+	.end		= 0xf1ffffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device em7210_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &em7210_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &em7210_flash_resource,
+};
+
+
+/*
+ * EM7210 UART
+ * The physical address of the serial port is 0xfe800000,
+ * so it can be used for physical and virtual address.
+ */
+static struct plat_serial8250_port em7210_serial_port[] = {
+	{
+		.mapbase	= IQ31244_UART,
+		.membase	= (char *)IQ31244_UART,
+		.irq		= IRQ_IOP32X_XINT1,
+		.flags		= UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= 1843200,
+	},
+	{ },
+};
+
+static struct resource em7210_uart_resource = {
+	.start		= IQ31244_UART,
+	.end		= IQ31244_UART + 7,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device em7210_serial_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+		.platform_data		= em7210_serial_port,
+	},
+	.num_resources	= 1,
+	.resource	= &em7210_uart_resource,
+};
+
+#define EM7210_HARDWARE_POWER 0
+
+void em7210_power_off(void)
+{
+	int ret;
+
+	ret = gpio_direction_output(EM7210_HARDWARE_POWER, 1);
+	if (ret)
+		pr_crit("could not drive power off GPIO high\n");
+}
+
+static int __init em7210_request_gpios(void)
+{
+	int ret;
+
+	if (!machine_is_em7210())
+		return 0;
+
+	ret = gpio_request(EM7210_HARDWARE_POWER, "power");
+	if (ret) {
+		pr_err("could not request power off GPIO\n");
+		return 0;
+	}
+
+	pm_power_off = em7210_power_off;
+
+	return 0;
+}
+device_initcall(em7210_request_gpios);
+
+static void __init em7210_init_machine(void)
+{
+	register_iop32x_gpio();
+	platform_device_register(&em7210_serial_device);
+	platform_device_register(&iop3xx_i2c0_device);
+	platform_device_register(&iop3xx_i2c1_device);
+	platform_device_register(&em7210_flash_device);
+	platform_device_register(&iop3xx_dma_0_channel);
+	platform_device_register(&iop3xx_dma_1_channel);
+
+	i2c_register_board_info(0, em7210_i2c_devices,
+		ARRAY_SIZE(em7210_i2c_devices));
+}
+
+MACHINE_START(EM7210, "Lanner EM7210")
+	.atag_offset	= 0x100,
+	.map_io		= em7210_map_io,
+	.init_irq	= iop32x_init_irq,
+	.init_time	= em7210_timer_init,
+	.init_machine	= em7210_init_machine,
+	.restart	= iop3xx_restart,
+MACHINE_END
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
new file mode 100644
index 000000000..547b2342d
--- /dev/null
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -0,0 +1,213 @@
+/*
+ * arch/arm/mach-iop32x/glantank.c
+ *
+ * Board support code for the GLAN Tank.
+ *
+ * Copyright (C) 2006, 2007 Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/f75375s.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/string.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <mach/time.h>
+#include "gpio-iop32x.h"
+
+/*
+ * GLAN Tank timer tick configuration.
+ */
+static void __init glantank_timer_init(void)
+{
+	/* 33.333 MHz crystal.  */
+	iop_init_time(200000000);
+}
+
+
+/*
+ * GLAN Tank I/O.
+ */
+static struct map_desc glantank_io_desc[] __initdata = {
+	{	/* on-board devices */
+		.virtual	= GLANTANK_UART,
+		.pfn		= __phys_to_pfn(GLANTANK_UART),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	},
+};
+
+void __init glantank_map_io(void)
+{
+	iop3xx_map_io();
+	iotable_init(glantank_io_desc, ARRAY_SIZE(glantank_io_desc));
+}
+
+
+/*
+ * GLAN Tank PCI.
+ */
+#define INTA	IRQ_IOP32X_XINT0
+#define INTB	IRQ_IOP32X_XINT1
+#define INTC	IRQ_IOP32X_XINT2
+#define INTD	IRQ_IOP32X_XINT3
+
+static int __init
+glantank_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static int pci_irq_table[][4] = {
+		/*
+		 * PCI IDSEL/INTPIN->INTLINE
+		 * A       B       C       D
+		 */
+		{INTD, INTD, INTD, INTD}, /* UART (8250) */
+		{INTA, INTA, INTA, INTA}, /* Ethernet (E1000) */
+		{INTB, INTB, INTB, INTB}, /* IDE (AEC6280R) */
+		{INTC, INTC, INTC, INTC}, /* USB (NEC) */
+	};
+
+	BUG_ON(pin < 1 || pin > 4);
+
+	return pci_irq_table[slot % 4][pin - 1];
+}
+
+static struct hw_pci glantank_pci __initdata = {
+	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
+	.setup		= iop3xx_pci_setup,
+	.preinit	= iop3xx_pci_preinit,
+	.map_irq	= glantank_pci_map_irq,
+};
+
+static int __init glantank_pci_init(void)
+{
+	if (machine_is_glantank())
+		pci_common_init(&glantank_pci);
+
+	return 0;
+}
+
+subsys_initcall(glantank_pci_init);
+
+
+/*
+ * GLAN Tank machine initialization.
+ */
+static struct physmap_flash_data glantank_flash_data = {
+	.width		= 2,
+};
+
+static struct resource glantank_flash_resource = {
+	.start		= 0xf0000000,
+	.end		= 0xf007ffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device glantank_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &glantank_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &glantank_flash_resource,
+};
+
+static struct plat_serial8250_port glantank_serial_port[] = {
+	{
+		.mapbase	= GLANTANK_UART,
+		.membase	= (char *)GLANTANK_UART,
+		.irq		= IRQ_IOP32X_XINT3,
+		.flags		= UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= 1843200,
+	},
+	{ },
+};
+
+static struct resource glantank_uart_resource = {
+	.start		= GLANTANK_UART,
+	.end		= GLANTANK_UART + 7,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device glantank_serial_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+		.platform_data		= glantank_serial_port,
+	},
+	.num_resources	= 1,
+	.resource	= &glantank_uart_resource,
+};
+
+static struct f75375s_platform_data glantank_f75375s = {
+	.pwm		= { 255, 255 },
+	.pwm_enable	= { 0, 0 },
+};
+
+static struct i2c_board_info __initdata glantank_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rs5c372a", 0x32),
+	},
+	{
+		I2C_BOARD_INFO("f75375", 0x2e),
+		.platform_data = &glantank_f75375s,
+	},
+};
+
+static void glantank_power_off(void)
+{
+	__raw_writeb(0x01, IOMEM(0xfe8d0004));
+
+	while (1)
+		;
+}
+
+static void __init glantank_init_machine(void)
+{
+	register_iop32x_gpio();
+	platform_device_register(&iop3xx_i2c0_device);
+	platform_device_register(&iop3xx_i2c1_device);
+	platform_device_register(&glantank_flash_device);
+	platform_device_register(&glantank_serial_device);
+	platform_device_register(&iop3xx_dma_0_channel);
+	platform_device_register(&iop3xx_dma_1_channel);
+
+	i2c_register_board_info(0, glantank_i2c_devices,
+		ARRAY_SIZE(glantank_i2c_devices));
+
+	pm_power_off = glantank_power_off;
+}
+
+MACHINE_START(GLANTANK, "GLAN Tank")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.atag_offset	= 0x100,
+	.map_io		= glantank_map_io,
+	.init_irq	= iop32x_init_irq,
+	.init_time	= glantank_timer_init,
+	.init_machine	= glantank_init_machine,
+	.restart	= iop3xx_restart,
+MACHINE_END
diff --git a/arch/arm/mach-iop32x/gpio-iop32x.h b/arch/arm/mach-iop32x/gpio-iop32x.h
new file mode 100644
index 000000000..20af87e4c
--- /dev/null
+++ b/arch/arm/mach-iop32x/gpio-iop32x.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+static struct resource iop32x_gpio_res[] = {
+	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x07c4), 0x10),
+};
+
+static inline void register_iop32x_gpio(void)
+{
+	platform_device_register_simple("gpio-iop", 0,
+					iop32x_gpio_res,
+					ARRAY_SIZE(iop32x_gpio_res));
+}
diff --git a/arch/arm/mach-iop32x/include/mach/adma.h b/arch/arm/mach-iop32x/include/mach/adma.h
new file mode 100644
index 000000000..2b2006312
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/adma.h
@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef IOP32X_ADMA_H
+#define IOP32X_ADMA_H
+#include <asm/hardware/iop3xx-adma.h>
+#endif
+
diff --git a/arch/arm/mach-iop32x/include/mach/entry-macro.S b/arch/arm/mach-iop32x/include/mach/entry-macro.S
new file mode 100644
index 000000000..ea13ae02d
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/entry-macro.S
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IOP32x-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/iop32x.h>
+
+	.macro get_irqnr_preamble, base, tmp
+	mrc	p15, 0, \tmp, c15, c1, 0
+	orr	\tmp, \tmp, #(1 << 6)
+	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
+	mrc	p15, 0, \tmp, c15, c1, 0
+	mov	\tmp, \tmp
+	sub	pc, pc, #4			@ cp_wait
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	mrc     p6, 0, \irqstat, c8, c0, 0	@ Read IINTSRC
+	cmp     \irqstat, #0
+	clzne   \irqnr, \irqstat
+	rsbne   \irqnr, \irqnr, #31
+	.endm
+
+	.macro arch_ret_to_user, tmp1, tmp2
+	mrc	p15, 0, \tmp1, c15, c1, 0
+	ands	\tmp2, \tmp1, #(1 << 6)
+	bicne	\tmp1, \tmp1, #(1 << 6)
+	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
+	.endm
diff --git a/arch/arm/mach-iop32x/include/mach/glantank.h b/arch/arm/mach-iop32x/include/mach/glantank.h
new file mode 100644
index 000000000..b9df2e461
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/glantank.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-iop32x/include/mach/glantank.h
+ *
+ * IO-Data GLAN Tank board registers
+ */
+
+#ifndef __GLANTANK_H
+#define __GLANTANK_H
+
+#define GLANTANK_UART		0xfe800000	/* UART */
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/hardware.h b/arch/arm/mach-iop32x/include/mach/hardware.h
new file mode 100644
index 000000000..6e5303e60
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/hardware.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-iop32x/include/mach/hardware.h
+ */
+
+#ifndef __HARDWARE_H
+#define __HARDWARE_H
+
+#include <asm/types.h>
+
+/*
+ * Note about PCI IO space mappings
+ *
+ * To make IO space accesses efficient, we store virtual addresses in
+ * the IO resources.
+ *
+ * The PCI IO space is located at virtual 0xfe000000 from physical
+ * 0x90000000. The PCI BARs must be programmed with physical addresses,
+ * but when we read them, we convert them to virtual addresses. See
+ * arch/arm/plat-iop/pci.c.
+ */
+
+#ifndef __ASSEMBLY__
+void iop32x_init_irq(void);
+#endif
+
+
+/*
+ * Generic chipset bits
+ */
+#include "iop32x.h"
+
+/*
+ * Board specific bits
+ */
+#include "glantank.h"
+#include "iq80321.h"
+#include "iq31244.h"
+#include "n2100.h"
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/iop32x.h b/arch/arm/mach-iop32x/include/mach/iop32x.h
new file mode 100644
index 000000000..56ec864ec
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/iop32x.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/iop32x.h
+ *
+ * Intel IOP32X Chip definitions
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOP32X_H
+#define __IOP32X_H
+
+/*
+ * Peripherals that are shared between the iop32x and iop33x but
+ * located at different addresses.
+ */
+#define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
+
+#include <asm/hardware/iop3xx.h>
+
+/* ATU Parameters
+ * set up a 1:1 bus to physical ram relationship
+ * w/ physical ram on top of pci in the memory map
+ */
+#define IOP32X_MAX_RAM_SIZE            0x40000000UL
+#define IOP3XX_MAX_RAM_SIZE            IOP32X_MAX_RAM_SIZE
+#define IOP3XX_PCI_LOWER_MEM_BA        0x80000000
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/iq31244.h b/arch/arm/mach-iop32x/include/mach/iq31244.h
new file mode 100644
index 000000000..e62da5da6
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/iq31244.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-iop32x/include/mach/iq31244.h
+ *
+ * Intel IQ31244 evaluation board registers
+ */
+
+#ifndef __IQ31244_H
+#define __IQ31244_H
+
+#define IQ31244_UART		0xfe800000	/* UART #1 */
+#define IQ31244_7SEG_1		0xfe840000	/* 7-Segment MSB */
+#define IQ31244_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
+#define IQ31244_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
+#define IQ31244_BATT_STAT	0xfe8f0000	/* Battery Status */
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/iq80321.h b/arch/arm/mach-iop32x/include/mach/iq80321.h
new file mode 100644
index 000000000..faf62c26f
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/iq80321.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-iop32x/include/mach/iq80321.h
+ *
+ * Intel IQ80321 evaluation board registers
+ */
+
+#ifndef __IQ80321_H
+#define __IQ80321_H
+
+#define IQ80321_UART		0xfe800000	/* UART #1 */
+#define IQ80321_7SEG_1		0xfe840000	/* 7-Segment MSB */
+#define IQ80321_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
+#define IQ80321_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
+#define IQ80321_BATT_STAT	0xfe8f0000	/* Battery Status */
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/irqs.h b/arch/arm/mach-iop32x/include/mach/irqs.h
new file mode 100644
index 000000000..33573e099
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/irqs.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/irqs.h
+ *
+ * Author:	Rory Bolt <rorybolt@pacbell.net>
+ * Copyright:	(C) 2002 Rory Bolt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IRQS_H
+#define __IRQS_H
+
+/*
+ * IOP80321 chipset interrupts
+ */
+#define IRQ_IOP32X_DMA0_EOT	0
+#define IRQ_IOP32X_DMA0_EOC	1
+#define IRQ_IOP32X_DMA1_EOT	2
+#define IRQ_IOP32X_DMA1_EOC	3
+#define IRQ_IOP32X_AA_EOT	6
+#define IRQ_IOP32X_AA_EOC	7
+#define IRQ_IOP32X_CORE_PMON	8
+#define IRQ_IOP32X_TIMER0	9
+#define IRQ_IOP32X_TIMER1	10
+#define IRQ_IOP32X_I2C_0	11
+#define IRQ_IOP32X_I2C_1	12
+#define IRQ_IOP32X_MESSAGING	13
+#define IRQ_IOP32X_ATU_BIST	14
+#define IRQ_IOP32X_PERFMON	15
+#define IRQ_IOP32X_CORE_PMU	16
+#define IRQ_IOP32X_BIU_ERR	17
+#define IRQ_IOP32X_ATU_ERR	18
+#define IRQ_IOP32X_MCU_ERR	19
+#define IRQ_IOP32X_DMA0_ERR	20
+#define IRQ_IOP32X_DMA1_ERR	21
+#define IRQ_IOP32X_AA_ERR	23
+#define IRQ_IOP32X_MSG_ERR	24
+#define IRQ_IOP32X_SSP		25
+#define IRQ_IOP32X_XINT0	27
+#define IRQ_IOP32X_XINT1	28
+#define IRQ_IOP32X_XINT2	29
+#define IRQ_IOP32X_XINT3	30
+#define IRQ_IOP32X_HPI		31
+
+#define NR_IRQS			32
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/n2100.h b/arch/arm/mach-iop32x/include/mach/n2100.h
new file mode 100644
index 000000000..70bb660b6
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/n2100.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-iop32x/include/mach/n2100.h
+ *
+ * Thecus N2100 board registers
+ */
+
+#ifndef __N2100_H
+#define __N2100_H
+
+#define N2100_UART		0xfe800000	/* UART */
+
+#define N2100_COPY_BUTTON	IOP3XX_GPIO_LINE(0)
+#define N2100_PCA9532_RESET	IOP3XX_GPIO_LINE(2)
+#define N2100_RESET_BUTTON	IOP3XX_GPIO_LINE(3)
+#define N2100_HARDWARE_RESET	IOP3XX_GPIO_LINE(4)
+#define N2100_POWER_BUTTON	IOP3XX_GPIO_LINE(5)
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/time.h b/arch/arm/mach-iop32x/include/mach/time.h
new file mode 100644
index 000000000..d08950cce
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/time.h
@@ -0,0 +1,5 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _IOP32X_TIME_H_
+#define _IOP32X_TIME_H_
+#define IRQ_IOP_TIMER0 IRQ_IOP32X_TIMER0
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/uncompress.h b/arch/arm/mach-iop32x/include/mach/uncompress.h
new file mode 100644
index 000000000..ed4ac3e28
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/uncompress.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-iop32x/include/mach/uncompress.h
+ */
+
+#include <asm/types.h>
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+
+volatile u8 *uart_base;
+
+#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+	uart_base[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	if (machine_is_iq80321())
+		uart_base = (volatile u8 *)IQ80321_UART;
+	else if (machine_is_iq31244() || machine_is_em7210())
+		uart_base = (volatile u8 *)IQ31244_UART;
+	else
+		uart_base = (volatile u8 *)0xfe800000;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
new file mode 100644
index 000000000..0e1392b20
--- /dev/null
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -0,0 +1,333 @@
+/*
+ * arch/arm/mach-iop32x/iq31244.c
+ *
+ * Board support code for the Intel EP80219 and IQ31244 platforms.
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright 2003 (c) MontaVista, Software, Inc.
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/string.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/cputype.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <mach/time.h>
+#include "gpio-iop32x.h"
+
+/*
+ * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
+ * same machine id, and the processor type was used to select board type.
+ * However this assumption breaks for an iq80219 board which is an iop219
+ * processor on an iq31244 board.  The force_ep80219 flag has been added
+ * for old boot loaders using the iq31244 machine id for an ep80219 platform.
+ */
+static int force_ep80219;
+
+static int is_80219(void)
+{
+	return !!((read_cpuid_id() & 0xffffffe0) == 0x69052e20);
+}
+
+static int is_ep80219(void)
+{
+	if (machine_is_ep80219() || force_ep80219)
+		return 1;
+	else
+		return 0;
+}
+
+
+/*
+ * EP80219/IQ31244 timer tick configuration.
+ */
+static void __init iq31244_timer_init(void)
+{
+	if (is_ep80219()) {
+		/* 33.333 MHz crystal.  */
+		iop_init_time(200000000);
+	} else {
+		/* 33.000 MHz crystal.  */
+		iop_init_time(198000000);
+	}
+}
+
+
+/*
+ * IQ31244 I/O.
+ */
+static struct map_desc iq31244_io_desc[] __initdata = {
+	{	/* on-board devices */
+		.virtual	= IQ31244_UART,
+		.pfn		= __phys_to_pfn(IQ31244_UART),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init iq31244_map_io(void)
+{
+	iop3xx_map_io();
+	iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc));
+}
+
+
+/*
+ * EP80219/IQ31244 PCI.
+ */
+static int __init
+ep80219_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	if (slot == 0) {
+		/* CFlash */
+		irq = IRQ_IOP32X_XINT1;
+	} else if (slot == 1) {
+		/* 82551 Pro 100 */
+		irq = IRQ_IOP32X_XINT0;
+	} else if (slot == 2) {
+		/* PCI-X Slot */
+		irq = IRQ_IOP32X_XINT3;
+	} else if (slot == 3) {
+		/* SATA */
+		irq = IRQ_IOP32X_XINT2;
+	} else {
+		printk(KERN_ERR "ep80219_pci_map_irq() called for unknown "
+			"device PCI:%d:%d:%d\n", dev->bus->number,
+			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+		irq = -1;
+	}
+
+	return irq;
+}
+
+static struct hw_pci ep80219_pci __initdata = {
+	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
+	.setup		= iop3xx_pci_setup,
+	.preinit	= iop3xx_pci_preinit,
+	.map_irq	= ep80219_pci_map_irq,
+};
+
+static int __init
+iq31244_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	if (slot == 0) {
+		/* CFlash */
+		irq = IRQ_IOP32X_XINT1;
+	} else if (slot == 1) {
+		/* SATA */
+		irq = IRQ_IOP32X_XINT2;
+	} else if (slot == 2) {
+		/* PCI-X Slot */
+		irq = IRQ_IOP32X_XINT3;
+	} else if (slot == 3) {
+		/* 82546 GigE */
+		irq = IRQ_IOP32X_XINT0;
+	} else {
+		printk(KERN_ERR "iq31244_pci_map_irq called for unknown "
+			"device PCI:%d:%d:%d\n", dev->bus->number,
+			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+		irq = -1;
+	}
+
+	return irq;
+}
+
+static struct hw_pci iq31244_pci __initdata = {
+	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
+	.setup		= iop3xx_pci_setup,
+	.preinit	= iop3xx_pci_preinit,
+	.map_irq	= iq31244_pci_map_irq,
+};
+
+static int __init iq31244_pci_init(void)
+{
+	if (is_ep80219())
+		pci_common_init(&ep80219_pci);
+	else if (machine_is_iq31244()) {
+		if (is_80219()) {
+			printk("note: iq31244 board type has been selected\n");
+			printk("note: to select ep80219 operation:\n");
+			printk("\t1/ specify \"force_ep80219\" on the kernel"
+				" command line\n");
+			printk("\t2/ update boot loader to pass"
+				" the ep80219 id: %d\n", MACH_TYPE_EP80219);
+		}
+		pci_common_init(&iq31244_pci);
+	}
+
+	return 0;
+}
+
+subsys_initcall(iq31244_pci_init);
+
+
+/*
+ * IQ31244 machine initialisation.
+ */
+static struct physmap_flash_data iq31244_flash_data = {
+	.width		= 2,
+};
+
+static struct resource iq31244_flash_resource = {
+	.start		= 0xf0000000,
+	.end		= 0xf07fffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device iq31244_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &iq31244_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &iq31244_flash_resource,
+};
+
+static struct plat_serial8250_port iq31244_serial_port[] = {
+	{
+		.mapbase	= IQ31244_UART,
+		.membase	= (char *)IQ31244_UART,
+		.irq		= IRQ_IOP32X_XINT1,
+		.flags		= UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= 1843200,
+	},
+	{ },
+};
+
+static struct resource iq31244_uart_resource = {
+	.start		= IQ31244_UART,
+	.end		= IQ31244_UART + 7,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device iq31244_serial_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+		.platform_data		= iq31244_serial_port,
+	},
+	.num_resources	= 1,
+	.resource	= &iq31244_uart_resource,
+};
+
+/*
+ * This function will send a SHUTDOWN_COMPLETE message to the PIC
+ * controller over I2C.  We are not using the i2c subsystem since
+ * we are going to power off and it may be removed
+ */
+void ep80219_power_off(void)
+{
+	/*
+	 * Send the Address byte w/ the start condition
+	 */
+	*IOP3XX_IDBR1 = 0x60;
+	*IOP3XX_ICR1 = 0xE9;
+	mdelay(1);
+
+	/*
+	 * Send the START_MSG byte w/ no start or stop condition
+	 */
+	*IOP3XX_IDBR1 = 0x0F;
+	*IOP3XX_ICR1 = 0xE8;
+	mdelay(1);
+
+	/*
+	 * Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or
+	 * stop condition
+	 */
+	*IOP3XX_IDBR1 = 0x03;
+	*IOP3XX_ICR1 = 0xE8;
+	mdelay(1);
+
+	/*
+	 * Send an ignored byte w/ stop condition
+	 */
+	*IOP3XX_IDBR1 = 0x00;
+	*IOP3XX_ICR1 = 0xEA;
+
+	while (1)
+		;
+}
+
+static void __init iq31244_init_machine(void)
+{
+	register_iop32x_gpio();
+	platform_device_register(&iop3xx_i2c0_device);
+	platform_device_register(&iop3xx_i2c1_device);
+	platform_device_register(&iq31244_flash_device);
+	platform_device_register(&iq31244_serial_device);
+	platform_device_register(&iop3xx_dma_0_channel);
+	platform_device_register(&iop3xx_dma_1_channel);
+
+	if (is_ep80219())
+		pm_power_off = ep80219_power_off;
+
+	if (!is_80219())
+		platform_device_register(&iop3xx_aau_channel);
+}
+
+static int __init force_ep80219_setup(char *str)
+{
+	force_ep80219 = 1;
+	return 1;
+}
+
+__setup("force_ep80219", force_ep80219_setup);
+
+MACHINE_START(IQ31244, "Intel IQ31244")
+	/* Maintainer: Intel Corp. */
+	.atag_offset	= 0x100,
+	.map_io		= iq31244_map_io,
+	.init_irq	= iop32x_init_irq,
+	.init_time	= iq31244_timer_init,
+	.init_machine	= iq31244_init_machine,
+	.restart	= iop3xx_restart,
+MACHINE_END
+
+/* There should have been an ep80219 machine identifier from the beginning.
+ * Boot roms older than March 2007 do not know the ep80219 machine id.  Pass
+ * "force_ep80219" on the kernel command line, otherwise iq31244 operation
+ * will be selected.
+ */
+MACHINE_START(EP80219, "Intel EP80219")
+	/* Maintainer: Intel Corp. */
+	.atag_offset	= 0x100,
+	.map_io		= iq31244_map_io,
+	.init_irq	= iop32x_init_irq,
+	.init_time	= iq31244_timer_init,
+	.init_machine	= iq31244_init_machine,
+	.restart	= iop3xx_restart,
+MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
new file mode 100644
index 000000000..66782ff1f
--- /dev/null
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -0,0 +1,192 @@
+/*
+ * arch/arm/mach-iop32x/iq80321.c
+ *
+ * Board support code for the Intel IQ80321 platform.
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <mach/time.h>
+#include "gpio-iop32x.h"
+
+/*
+ * IQ80321 timer tick configuration.
+ */
+static void __init iq80321_timer_init(void)
+{
+	/* 33.333 MHz crystal.  */
+	iop_init_time(200000000);
+}
+
+
+/*
+ * IQ80321 I/O.
+ */
+static struct map_desc iq80321_io_desc[] __initdata = {
+ 	{	/* on-board devices */
+		.virtual	= IQ80321_UART,
+		.pfn		= __phys_to_pfn(IQ80321_UART),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init iq80321_map_io(void)
+{
+	iop3xx_map_io();
+	iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc));
+}
+
+
+/*
+ * IQ80321 PCI.
+ */
+static int __init
+iq80321_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	if ((slot == 2 || slot == 6) && pin == 1) {
+		/* PCI-X Slot INTA */
+		irq = IRQ_IOP32X_XINT2;
+	} else if ((slot == 2 || slot == 6) && pin == 2) {
+		/* PCI-X Slot INTA */
+		irq = IRQ_IOP32X_XINT3;
+	} else if ((slot == 2 || slot == 6) && pin == 3) {
+		/* PCI-X Slot INTA */
+		irq = IRQ_IOP32X_XINT0;
+	} else if ((slot == 2 || slot == 6) && pin == 4) {
+		/* PCI-X Slot INTA */
+		irq = IRQ_IOP32X_XINT1;
+	} else if (slot == 4 || slot == 8) {
+		/* Gig-E */
+		irq = IRQ_IOP32X_XINT0;
+	} else {
+		printk(KERN_ERR "iq80321_pci_map_irq() called for unknown "
+			"device PCI:%d:%d:%d\n", dev->bus->number,
+			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+		irq = -1;
+	}
+
+	return irq;
+}
+
+static struct hw_pci iq80321_pci __initdata = {
+	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
+	.setup		= iop3xx_pci_setup,
+	.preinit	= iop3xx_pci_preinit_cond,
+	.map_irq	= iq80321_pci_map_irq,
+};
+
+static int __init iq80321_pci_init(void)
+{
+	if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
+		machine_is_iq80321())
+		pci_common_init(&iq80321_pci);
+
+	return 0;
+}
+
+subsys_initcall(iq80321_pci_init);
+
+
+/*
+ * IQ80321 machine initialisation.
+ */
+static struct physmap_flash_data iq80321_flash_data = {
+	.width		= 1,
+};
+
+static struct resource iq80321_flash_resource = {
+	.start		= 0xf0000000,
+	.end		= 0xf07fffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device iq80321_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &iq80321_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &iq80321_flash_resource,
+};
+
+static struct plat_serial8250_port iq80321_serial_port[] = {
+	{
+		.mapbase	= IQ80321_UART,
+		.membase	= (char *)IQ80321_UART,
+		.irq		= IRQ_IOP32X_XINT1,
+		.flags		= UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= 1843200,
+	},
+	{ },
+};
+
+static struct resource iq80321_uart_resource = {
+	.start		= IQ80321_UART,
+	.end		= IQ80321_UART + 7,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device iq80321_serial_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+		.platform_data		= iq80321_serial_port,
+	},
+	.num_resources	= 1,
+	.resource	= &iq80321_uart_resource,
+};
+
+static void __init iq80321_init_machine(void)
+{
+	register_iop32x_gpio();
+	platform_device_register(&iop3xx_i2c0_device);
+	platform_device_register(&iop3xx_i2c1_device);
+	platform_device_register(&iq80321_flash_device);
+	platform_device_register(&iq80321_serial_device);
+	platform_device_register(&iop3xx_dma_0_channel);
+	platform_device_register(&iop3xx_dma_1_channel);
+	platform_device_register(&iop3xx_aau_channel);
+}
+
+MACHINE_START(IQ80321, "Intel IQ80321")
+	/* Maintainer: Intel Corp. */
+	.atag_offset	= 0x100,
+	.map_io		= iq80321_map_io,
+	.init_irq	= iop32x_init_irq,
+	.init_time	= iq80321_timer_init,
+	.init_machine	= iq80321_init_machine,
+	.restart	= iop3xx_restart,
+MACHINE_END
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
new file mode 100644
index 000000000..2d1f69a68
--- /dev/null
+++ b/arch/arm/mach-iop32x/irq.c
@@ -0,0 +1,74 @@
+/*
+ * arch/arm/mach-iop32x/irq.c
+ *
+ * Generic IOP32X IRQ handling functionality
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+static u32 iop32x_mask;
+
+static void intctl_write(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
+}
+
+static void intstr_write(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c4, c0, 0" : : "r" (val));
+}
+
+static void
+iop32x_irq_mask(struct irq_data *d)
+{
+	iop32x_mask &= ~(1 << d->irq);
+	intctl_write(iop32x_mask);
+}
+
+static void
+iop32x_irq_unmask(struct irq_data *d)
+{
+	iop32x_mask |= 1 << d->irq;
+	intctl_write(iop32x_mask);
+}
+
+struct irq_chip ext_chip = {
+	.name		= "IOP32x",
+	.irq_ack	= iop32x_irq_mask,
+	.irq_mask	= iop32x_irq_mask,
+	.irq_unmask	= iop32x_irq_unmask,
+};
+
+void __init iop32x_init_irq(void)
+{
+	int i;
+
+	iop_init_cp6_handler();
+
+	intctl_write(0);
+	intstr_write(0);
+	if (machine_is_glantank() ||
+	    machine_is_iq80321() ||
+	    machine_is_iq31244() ||
+	    machine_is_n2100() ||
+	    machine_is_em7210())
+		*IOP3XX_PCIIRSR = 0x0f;
+
+	for (i = 0; i < NR_IRQS; i++) {
+		irq_set_chip_and_handler(i, &ext_chip, handle_level_irq);
+		irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
+	}
+}
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
new file mode 100644
index 000000000..23e8c9351
--- /dev/null
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -0,0 +1,368 @@
+/*
+ * arch/arm/mach-iop32x/n2100.c
+ *
+ * Board support code for the Thecus N2100 platform.
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright 2003 (c) MontaVista, Software, Inc.
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/f75375s.h>
+#include <linux/leds-pca9532.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/string.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <mach/time.h>
+#include "gpio-iop32x.h"
+
+/*
+ * N2100 timer tick configuration.
+ */
+static void __init n2100_timer_init(void)
+{
+	/* 33.000 MHz crystal.  */
+	iop_init_time(198000000);
+}
+
+
+/*
+ * N2100 I/O.
+ */
+static struct map_desc n2100_io_desc[] __initdata = {
+	{	/* on-board devices */
+		.virtual	= N2100_UART,
+		.pfn		= __phys_to_pfn(N2100_UART),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	},
+};
+
+void __init n2100_map_io(void)
+{
+	iop3xx_map_io();
+	iotable_init(n2100_io_desc, ARRAY_SIZE(n2100_io_desc));
+}
+
+
+/*
+ * N2100 PCI.
+ */
+static int n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	if (PCI_SLOT(dev->devfn) == 1) {
+		/* RTL8110SB #1 */
+		irq = IRQ_IOP32X_XINT0;
+	} else if (PCI_SLOT(dev->devfn) == 2) {
+		/* RTL8110SB #2 */
+		irq = IRQ_IOP32X_XINT3;
+	} else if (PCI_SLOT(dev->devfn) == 3) {
+		/* Sil3512 */
+		irq = IRQ_IOP32X_XINT2;
+	} else if (PCI_SLOT(dev->devfn) == 4 && pin == 1) {
+		/* VT6212 INTA */
+		irq = IRQ_IOP32X_XINT1;
+	} else if (PCI_SLOT(dev->devfn) == 4 && pin == 2) {
+		/* VT6212 INTB */
+		irq = IRQ_IOP32X_XINT0;
+	} else if (PCI_SLOT(dev->devfn) == 4 && pin == 3) {
+		/* VT6212 INTC */
+		irq = IRQ_IOP32X_XINT2;
+	} else if (PCI_SLOT(dev->devfn) == 5) {
+		/* Mini-PCI slot */
+		irq = IRQ_IOP32X_XINT3;
+	} else {
+		printk(KERN_ERR "n2100_pci_map_irq() called for unknown "
+			"device PCI:%d:%d:%d\n", dev->bus->number,
+			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+		irq = -1;
+	}
+
+	return irq;
+}
+
+static struct hw_pci n2100_pci __initdata = {
+	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
+	.setup		= iop3xx_pci_setup,
+	.preinit	= iop3xx_pci_preinit,
+	.map_irq	= n2100_pci_map_irq,
+};
+
+/*
+ * Both r8169 chips on the n2100 exhibit PCI parity problems.  Set
+ * the ->broken_parity_status flag for both ports so that the r8169
+ * driver knows it should ignore error interrupts.
+ */
+static void n2100_fixup_r8169(struct pci_dev *dev)
+{
+	if (dev->bus->number == 0 &&
+	    (dev->devfn == PCI_DEVFN(1, 0) ||
+	     dev->devfn == PCI_DEVFN(2, 0)))
+		dev->broken_parity_status = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, PCI_ANY_ID, n2100_fixup_r8169);
+
+static int __init n2100_pci_init(void)
+{
+	if (machine_is_n2100())
+		pci_common_init(&n2100_pci);
+
+	return 0;
+}
+
+subsys_initcall(n2100_pci_init);
+
+
+/*
+ * N2100 machine initialisation.
+ */
+static struct physmap_flash_data n2100_flash_data = {
+	.width		= 2,
+};
+
+static struct resource n2100_flash_resource = {
+	.start		= 0xf0000000,
+	.end		= 0xf0ffffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device n2100_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &n2100_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &n2100_flash_resource,
+};
+
+
+static struct plat_serial8250_port n2100_serial_port[] = {
+	{
+		.mapbase	= N2100_UART,
+		.membase	= (char *)N2100_UART,
+		.irq		= 0,
+		.flags		= UPF_SKIP_TEST | UPF_AUTO_IRQ | UPF_SHARE_IRQ,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= 1843200,
+	},
+	{ },
+};
+
+static struct resource n2100_uart_resource = {
+	.start		= N2100_UART,
+	.end		= N2100_UART + 7,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device n2100_serial_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+		.platform_data		= n2100_serial_port,
+	},
+	.num_resources	= 1,
+	.resource	= &n2100_uart_resource,
+};
+
+static struct f75375s_platform_data n2100_f75375s = {
+	.pwm		= { 255, 255 },
+	.pwm_enable = { 0, 0 },
+};
+
+static struct pca9532_platform_data n2100_leds = {
+	.leds = {
+	{	.name = "n2100:red:satafail0",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{	.name = "n2100:red:satafail1",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{	.name = "n2100:blue:usb",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{ 	.type = PCA9532_TYPE_NONE },
+
+	{ 	.type = PCA9532_TYPE_NONE },
+	{ 	.type = PCA9532_TYPE_NONE },
+	{ 	.type = PCA9532_TYPE_NONE },
+	{	.name = "n2100:red:usb",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+
+	{	.type = PCA9532_TYPE_NONE }, /* power OFF gpio */
+	{	.type = PCA9532_TYPE_NONE }, /* reset gpio */
+	{	.type = PCA9532_TYPE_NONE },
+	{	.type = PCA9532_TYPE_NONE },
+
+	{	.type = PCA9532_TYPE_NONE },
+	{	.name = "n2100:orange:system",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{	.name = "n2100:red:system",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{	.name = "N2100 beeper"  ,
+		.state =  PCA9532_OFF,
+		.type = PCA9532_TYPE_N2100_BEEP,
+	},
+	},
+	.psc = { 0, 0 },
+	.pwm = { 0, 0 },
+};
+
+static struct i2c_board_info __initdata n2100_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rs5c372b", 0x32),
+	},
+	{
+		I2C_BOARD_INFO("f75375", 0x2e),
+		.platform_data = &n2100_f75375s,
+	},
+	{
+		I2C_BOARD_INFO("pca9532", 0x60),
+		.platform_data = &n2100_leds,
+	},
+};
+
+/*
+ * Pull PCA9532 GPIO #8 low to power off the machine.
+ */
+static void n2100_power_off(void)
+{
+	local_irq_disable();
+
+	/* Start condition, I2C address of PCA9532, write transaction.  */
+	*IOP3XX_IDBR0 = 0xc0;
+	*IOP3XX_ICR0 = 0xe9;
+	mdelay(1);
+
+	/* Write address 0x08.  */
+	*IOP3XX_IDBR0 = 0x08;
+	*IOP3XX_ICR0 = 0xe8;
+	mdelay(1);
+
+	/* Write data 0x01, stop condition.  */
+	*IOP3XX_IDBR0 = 0x01;
+	*IOP3XX_ICR0 = 0xea;
+
+	while (1)
+		;
+}
+
+static void n2100_restart(enum reboot_mode mode, const char *cmd)
+{
+	int ret;
+
+	ret = gpio_direction_output(N2100_HARDWARE_RESET, 0);
+	if (ret) {
+		pr_crit("could not drive reset GPIO low\n");
+		return;
+	}
+	/* Wait for reset to happen */
+	while (1)
+		;
+}
+
+
+static struct timer_list power_button_poll_timer;
+
+static void power_button_poll(struct timer_list *unused)
+{
+	if (gpio_get_value(N2100_POWER_BUTTON) == 0) {
+		ctrl_alt_del();
+		return;
+	}
+
+	power_button_poll_timer.expires = jiffies + (HZ / 10);
+	add_timer(&power_button_poll_timer);
+}
+
+static int __init n2100_request_gpios(void)
+{
+	int ret;
+
+	if (!machine_is_n2100())
+		return 0;
+
+	ret = gpio_request(N2100_HARDWARE_RESET, "reset");
+	if (ret)
+		pr_err("could not request reset GPIO\n");
+
+	ret = gpio_request(N2100_POWER_BUTTON, "power");
+	if (ret)
+		pr_err("could not request power GPIO\n");
+	else {
+		ret = gpio_direction_input(N2100_POWER_BUTTON);
+		if (ret)
+			pr_err("could not set power GPIO as input\n");
+	}
+	/* Set up power button poll timer */
+	timer_setup(&power_button_poll_timer, power_button_poll, 0);
+	power_button_poll_timer.expires = jiffies + (HZ / 10);
+	add_timer(&power_button_poll_timer);
+	return 0;
+}
+device_initcall(n2100_request_gpios);
+
+static void __init n2100_init_machine(void)
+{
+	register_iop32x_gpio();
+	platform_device_register(&iop3xx_i2c0_device);
+	platform_device_register(&n2100_flash_device);
+	platform_device_register(&n2100_serial_device);
+	platform_device_register(&iop3xx_dma_0_channel);
+	platform_device_register(&iop3xx_dma_1_channel);
+
+	i2c_register_board_info(0, n2100_i2c_devices,
+		ARRAY_SIZE(n2100_i2c_devices));
+
+	pm_power_off = n2100_power_off;
+}
+
+MACHINE_START(N2100, "Thecus N2100")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.atag_offset	= 0x100,
+	.map_io		= n2100_map_io,
+	.init_irq	= iop32x_init_irq,
+	.init_time	= n2100_timer_init,
+	.init_machine	= n2100_init_machine,
+	.restart	= n2100_restart,
+MACHINE_END