Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

16 files changed, 817 insertions, 0 deletions

diff --git a/arch/arm/mach-iop33x/Kconfig b/arch/arm/mach-iop33x/Kconfig
new file mode 100644
index 000000000..9aa016bb1
--- /dev/null
+++ b/arch/arm/mach-iop33x/Kconfig
@@ -0,0 +1,21 @@
+if ARCH_IOP33X
+
+menu "IOP33x Implementation Options"
+
+comment "IOP33x Platform Types"
+
+config ARCH_IQ80331
+	bool "Enable support for IQ80331"
+	help
+	  Say Y here if you want to run your kernel on the Intel IQ80331
+	  evaluation kit for the IOP331 chipset.
+
+config MACH_IQ80332
+	bool "Enable support for IQ80332"
+	help
+	  Say Y here if you want to run your kernel on the Intel IQ80332
+	  evaluation kit for the IOP332 chipset.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-iop33x/Makefile b/arch/arm/mach-iop33x/Makefile
new file mode 100644
index 000000000..e95db30d8
--- /dev/null
+++ b/arch/arm/mach-iop33x/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y			:= irq.o uart.o
+
+obj-$(CONFIG_ARCH_IQ80331) += iq80331.o
+obj-$(CONFIG_MACH_IQ80332) += iq80332.o
diff --git a/arch/arm/mach-iop33x/Makefile.boot b/arch/arm/mach-iop33x/Makefile.boot
new file mode 100644
index 000000000..760a0efe7
--- /dev/null
+++ b/arch/arm/mach-iop33x/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	+= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-iop33x/include/mach/adma.h b/arch/arm/mach-iop33x/include/mach/adma.h
new file mode 100644
index 000000000..8aa7159ab
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/adma.h
@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef IOP33X_ADMA_H
+#define IOP33X_ADMA_H
+#include <asm/hardware/iop3xx-adma.h>
+#endif
+
diff --git a/arch/arm/mach-iop33x/include/mach/entry-macro.S b/arch/arm/mach-iop33x/include/mach/entry-macro.S
new file mode 100644
index 000000000..0a398fe1f
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/entry-macro.S
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IOP33x-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/iop33x.h>
+
+	.macro get_irqnr_preamble, base, tmp
+	mrc	p15, 0, \tmp, c15, c1, 0
+	orr	\tmp, \tmp, #(1 << 6)
+	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
+	mrc	p15, 0, \tmp, c15, c1, 0
+	mov	\tmp, \tmp
+	sub	pc, pc, #4			@ cp_wait
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	mrc     p6, 0, \irqstat, c14, c0, 0     @ Read IINTVEC
+	cmp     \irqstat, #0
+	mrceq   p6, 0, \irqstat, c14, c0, 0     @ erratum 63 workaround
+	adds    \irqnr, \irqstat, #1
+	movne   \irqnr, \irqstat, lsr #2
+	.endm
+
+	.macro arch_ret_to_user, tmp1, tmp2
+	mrc	p15, 0, \tmp1, c15, c1, 0
+	ands	\tmp2, \tmp1, #(1 << 6)
+	bicne	\tmp1, \tmp1, #(1 << 6)
+	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
+	.endm
diff --git a/arch/arm/mach-iop33x/include/mach/hardware.h b/arch/arm/mach-iop33x/include/mach/hardware.h
new file mode 100644
index 000000000..020bafbc3
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/hardware.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-iop33x/include/mach/hardware.h
+ */
+
+#ifndef __HARDWARE_H
+#define __HARDWARE_H
+
+#include <asm/types.h>
+
+/*
+ * Note about PCI IO space mappings
+ *
+ * To make IO space accesses efficient, we store virtual addresses in
+ * the IO resources.
+ *
+ * The PCI IO space is located at virtual 0xfe000000 from physical
+ * 0x90000000.  The PCI BARs must be programmed with physical addresses,
+ * but when we read them, we convert them to virtual addresses.  See
+ * arch/arm/mach-iop3xx/iop3xx-pci.c
+ */
+
+#ifndef __ASSEMBLY__
+void iop33x_init_irq(void);
+
+extern struct platform_device iop33x_uart0_device;
+extern struct platform_device iop33x_uart1_device;
+#endif
+
+
+/*
+ * Generic chipset bits
+ *
+ */
+#include "iop33x.h"
+
+/*
+ * Board specific bits
+ */
+#include "iq80331.h"
+#include "iq80332.h"
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iop33x.h b/arch/arm/mach-iop33x/include/mach/iop33x.h
new file mode 100644
index 000000000..c95122653
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/iop33x.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/iop33x.h
+ *
+ * Intel IOP33X Chip definitions
+ *
+ * Author: Dave Jiang (dave.jiang@intel.com)
+ * Copyright (C) 2003, 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOP33X_H
+#define __IOP33X_H
+
+/*
+ * Peripherals that are shared between the iop32x and iop33x but
+ * located at different addresses.
+ */
+#define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg))
+
+#include <asm/hardware/iop3xx.h>
+
+/* UARTs  */
+#define IOP33X_UART0_PHYS	(IOP3XX_PERIPHERAL_PHYS_BASE + 0x1700)
+#define IOP33X_UART0_VIRT	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1700)
+#define IOP33X_UART1_PHYS	(IOP3XX_PERIPHERAL_PHYS_BASE + 0x1740)
+#define IOP33X_UART1_VIRT	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1740)
+
+/* ATU Parameters
+ * set up a 1:1 bus to physical ram relationship
+ * w/ pci on top of physical ram in memory map
+ */
+#define IOP33X_MAX_RAM_SIZE		0x80000000UL
+#define IOP3XX_MAX_RAM_SIZE		IOP33X_MAX_RAM_SIZE
+#define IOP3XX_PCI_LOWER_MEM_BA	(PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iq80331.h b/arch/arm/mach-iop33x/include/mach/iq80331.h
new file mode 100644
index 000000000..c7e68d863
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/iq80331.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-iop33x/include/mach/iq80331.h
+ *
+ * Intel IQ80331 evaluation board registers
+ */
+
+#ifndef __IQ80331_H
+#define __IQ80331_H
+
+#define IQ80331_7SEG_1		0xce840000	/* 7-Segment MSB */
+#define IQ80331_7SEG_0		0xce850000	/* 7-Segment LSB (WO) */
+#define IQ80331_ROTARY_SW	0xce8d0000	/* Rotary Switch */
+#define IQ80331_BATT_STAT	0xce8f0000	/* Battery Status */
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iq80332.h b/arch/arm/mach-iop33x/include/mach/iq80332.h
new file mode 100644
index 000000000..749b44bf7
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/iq80332.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-iop33x/include/mach/iq80332.h
+ *
+ * Intel IQ80332 evaluation board registers
+ */
+
+#ifndef __IQ80332_H
+#define __IQ80332_H
+
+#define IQ80332_7SEG_1		0xce840000	/* 7-Segment MSB */
+#define IQ80332_7SEG_0		0xce850000	/* 7-Segment LSB (WO) */
+#define IQ80332_ROTARY_SW	0xce8d0000	/* Rotary Switch */
+#define IQ80332_BATT_STAT	0xce8f0000	/* Battery Status */
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/irqs.h b/arch/arm/mach-iop33x/include/mach/irqs.h
new file mode 100644
index 000000000..707628a60
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/irqs.h
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/irqs.h
+ *
+ * Author:	Dave Jiang (dave.jiang@intel.com)
+ * Copyright:	(C) 2003 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IRQS_H
+#define __IRQS_H
+
+/*
+ * IOP80331 chipset interrupts
+ */
+#define IRQ_IOP33X_DMA0_EOT	0
+#define IRQ_IOP33X_DMA0_EOC	1
+#define IRQ_IOP33X_DMA1_EOT	2
+#define IRQ_IOP33X_DMA1_EOC	3
+#define IRQ_IOP33X_AA_EOT	6
+#define IRQ_IOP33X_AA_EOC	7
+#define IRQ_IOP33X_TIMER0	8
+#define IRQ_IOP33X_TIMER1	9
+#define IRQ_IOP33X_I2C_0	10
+#define IRQ_IOP33X_I2C_1	11
+#define IRQ_IOP33X_MSG		12
+#define IRQ_IOP33X_MSGIBQ	13
+#define IRQ_IOP33X_ATU_BIST	14
+#define IRQ_IOP33X_PERFMON	15
+#define IRQ_IOP33X_CORE_PMU	16
+#define IRQ_IOP33X_XINT0	24
+#define IRQ_IOP33X_XINT1	25
+#define IRQ_IOP33X_XINT2	26
+#define IRQ_IOP33X_XINT3	27
+#define IRQ_IOP33X_XINT8	32
+#define IRQ_IOP33X_XINT9	33
+#define IRQ_IOP33X_XINT10	34
+#define IRQ_IOP33X_XINT11	35
+#define IRQ_IOP33X_XINT12	36
+#define IRQ_IOP33X_XINT13	37
+#define IRQ_IOP33X_XINT14	38
+#define IRQ_IOP33X_XINT15	39
+#define IRQ_IOP33X_UART0	51
+#define IRQ_IOP33X_UART1	52
+#define IRQ_IOP33X_PBIE		53
+#define IRQ_IOP33X_ATU_CRW	54
+#define IRQ_IOP33X_ATU_ERR	55
+#define IRQ_IOP33X_MCU_ERR	56
+#define IRQ_IOP33X_DMA0_ERR	57
+#define IRQ_IOP33X_DMA1_ERR	58
+#define IRQ_IOP33X_AA_ERR	60
+#define IRQ_IOP33X_MSG_ERR	62
+#define IRQ_IOP33X_HPI		63
+
+#define NR_IRQS			64
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/time.h b/arch/arm/mach-iop33x/include/mach/time.h
new file mode 100644
index 000000000..801f8fd64
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/time.h
@@ -0,0 +1,5 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _IOP33X_TIME_H_
+#define _IOP33X_TIME_H_
+#define IRQ_IOP_TIMER0 IRQ_IOP33X_TIMER0
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/uncompress.h b/arch/arm/mach-iop33x/include/mach/uncompress.h
new file mode 100644
index 000000000..62b71cde1
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-iop33x/include/mach/uncompress.h
+ */
+
+#include <asm/types.h>
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+
+volatile u32 *uart_base;
+
+#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+	uart_base[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	if (machine_is_iq80331() || machine_is_iq80332())
+		uart_base = (volatile u32 *)IOP33X_UART0_PHYS;
+	else
+		uart_base = (volatile u32 *)0xfe800000;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
new file mode 100644
index 000000000..e2cb65cfb
--- /dev/null
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -0,0 +1,152 @@
+/*
+ * arch/arm/mach-iop33x/iq80331.c
+ *
+ * Board support code for the Intel IQ80331 platform.
+ *
+ * Author: Dave Jiang <dave.jiang@intel.com>
+ * Copyright (C) 2003 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <mach/time.h>
+
+/*
+ * IQ80331 timer tick configuration.
+ */
+static void __init iq80331_timer_init(void)
+{
+	/* D-Step parts run at a higher internal bus frequency */
+	if (*IOP3XX_ATURID >= 0xa)
+		iop_init_time(333000000);
+	else
+		iop_init_time(266000000);
+}
+
+
+/*
+ * IQ80331 PCI.
+ */
+static int __init
+iq80331_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	if (slot == 1 && pin == 1) {
+		/* PCI-X Slot INTA */
+		irq = IRQ_IOP33X_XINT1;
+	} else if (slot == 1 && pin == 2) {
+		/* PCI-X Slot INTB */
+		irq = IRQ_IOP33X_XINT2;
+	} else if (slot == 1 && pin == 3) {
+		/* PCI-X Slot INTC */
+		irq = IRQ_IOP33X_XINT3;
+	} else if (slot == 1 && pin == 4) {
+		/* PCI-X Slot INTD */
+		irq = IRQ_IOP33X_XINT0;
+	} else if (slot == 2) {
+		/* GigE */
+		irq = IRQ_IOP33X_XINT2;
+	} else {
+		printk(KERN_ERR "iq80331_pci_map_irq() called for unknown "
+			"device PCI:%d:%d:%d\n", dev->bus->number,
+			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+		irq = -1;
+	}
+
+	return irq;
+}
+
+static struct hw_pci iq80331_pci __initdata = {
+	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
+	.setup		= iop3xx_pci_setup,
+	.preinit	= iop3xx_pci_preinit_cond,
+	.map_irq	= iq80331_pci_map_irq,
+};
+
+static int __init iq80331_pci_init(void)
+{
+	if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
+		machine_is_iq80331())
+		pci_common_init(&iq80331_pci);
+
+	return 0;
+}
+
+subsys_initcall(iq80331_pci_init);
+
+
+/*
+ * IQ80331 machine initialisation.
+ */
+static struct physmap_flash_data iq80331_flash_data = {
+	.width		= 1,
+};
+
+static struct resource iq80331_flash_resource = {
+	.start		= 0xc0000000,
+	.end		= 0xc07fffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device iq80331_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &iq80331_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &iq80331_flash_resource,
+};
+
+static struct resource iq80331_gpio_res[] = {
+	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x1780), 0x10),
+};
+
+static void __init iq80331_init_machine(void)
+{
+	platform_device_register_simple("gpio-iop", 0,
+					iq80331_gpio_res,
+					ARRAY_SIZE(iq80331_gpio_res));
+	platform_device_register(&iop3xx_i2c0_device);
+	platform_device_register(&iop3xx_i2c1_device);
+	platform_device_register(&iop33x_uart0_device);
+	platform_device_register(&iop33x_uart1_device);
+	platform_device_register(&iq80331_flash_device);
+	platform_device_register(&iop3xx_dma_0_channel);
+	platform_device_register(&iop3xx_dma_1_channel);
+	platform_device_register(&iop3xx_aau_channel);
+}
+
+MACHINE_START(IQ80331, "Intel IQ80331")
+	/* Maintainer: Intel Corp. */
+	.atag_offset	= 0x100,
+	.map_io		= iop3xx_map_io,
+	.init_irq	= iop33x_init_irq,
+	.init_time	= iq80331_timer_init,
+	.init_machine	= iq80331_init_machine,
+	.restart	= iop3xx_restart,
+MACHINE_END
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
new file mode 100644
index 000000000..0b6269d94
--- /dev/null
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -0,0 +1,152 @@
+/*
+ * arch/arm/mach-iop33x/iq80332.c
+ *
+ * Board support code for the Intel IQ80332 platform.
+ *
+ * Author: Dave Jiang <dave.jiang@intel.com>
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <mach/time.h>
+
+/*
+ * IQ80332 timer tick configuration.
+ */
+static void __init iq80332_timer_init(void)
+{
+	/* D-Step parts and the iop333 run at a higher internal bus frequency */
+	if (*IOP3XX_ATURID >= 0xa || *IOP3XX_ATUDID == 0x374)
+		iop_init_time(333000000);
+	else
+		iop_init_time(266000000);
+}
+
+
+/*
+ * IQ80332 PCI.
+ */
+static int __init
+iq80332_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	if (slot == 4 && pin == 1) {
+		/* PCI-X Slot INTA */
+		irq = IRQ_IOP33X_XINT0;
+	} else if (slot == 4 && pin == 2) {
+		/* PCI-X Slot INTB */
+		irq = IRQ_IOP33X_XINT1;
+	} else if (slot == 4 && pin == 3) {
+		/* PCI-X Slot INTC */
+		irq = IRQ_IOP33X_XINT2;
+	} else if (slot == 4 && pin == 4) {
+		/* PCI-X Slot INTD */
+		irq = IRQ_IOP33X_XINT3;
+	} else if (slot == 6) {
+		/* GigE */
+		irq = IRQ_IOP33X_XINT2;
+	} else {
+		printk(KERN_ERR "iq80332_pci_map_irq() called for unknown "
+			"device PCI:%d:%d:%d\n", dev->bus->number,
+			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+		irq = -1;
+	}
+
+	return irq;
+}
+
+static struct hw_pci iq80332_pci __initdata = {
+	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
+	.setup		= iop3xx_pci_setup,
+	.preinit	= iop3xx_pci_preinit_cond,
+	.map_irq	= iq80332_pci_map_irq,
+};
+
+static int __init iq80332_pci_init(void)
+{
+	if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
+		machine_is_iq80332())
+		pci_common_init(&iq80332_pci);
+
+	return 0;
+}
+
+subsys_initcall(iq80332_pci_init);
+
+
+/*
+ * IQ80332 machine initialisation.
+ */
+static struct physmap_flash_data iq80332_flash_data = {
+	.width		= 1,
+};
+
+static struct resource iq80332_flash_resource = {
+	.start		= 0xc0000000,
+	.end		= 0xc07fffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device iq80332_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &iq80332_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &iq80332_flash_resource,
+};
+
+static struct resource iq80332_gpio_res[] = {
+	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x1780), 0x10),
+};
+
+static void __init iq80332_init_machine(void)
+{
+	platform_device_register_simple("gpio-iop", 0,
+					iq80332_gpio_res,
+					ARRAY_SIZE(iq80332_gpio_res));
+	platform_device_register(&iop3xx_i2c0_device);
+	platform_device_register(&iop3xx_i2c1_device);
+	platform_device_register(&iop33x_uart0_device);
+	platform_device_register(&iop33x_uart1_device);
+	platform_device_register(&iq80332_flash_device);
+	platform_device_register(&iop3xx_dma_0_channel);
+	platform_device_register(&iop3xx_dma_1_channel);
+	platform_device_register(&iop3xx_aau_channel);
+}
+
+MACHINE_START(IQ80332, "Intel IQ80332")
+	/* Maintainer: Intel Corp. */
+	.atag_offset	= 0x100,
+	.map_io		= iop3xx_map_io,
+	.init_irq	= iop33x_init_irq,
+	.init_time	= iq80332_timer_init,
+	.init_machine	= iq80332_init_machine,
+	.restart	= iop3xx_restart,
+MACHINE_END
diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c
new file mode 100644
index 000000000..c99ec8d0d
--- /dev/null
+++ b/arch/arm/mach-iop33x/irq.c
@@ -0,0 +1,118 @@
+/*
+ * arch/arm/mach-iop33x/irq.c
+ *
+ * Generic IOP331 IRQ handling functionality
+ *
+ * Author: Dave Jiang <dave.jiang@intel.com>
+ * Copyright (C) 2003 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+static u32 iop33x_mask0;
+static u32 iop33x_mask1;
+
+static void intctl0_write(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
+}
+
+static void intctl1_write(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c1, c0, 0" : : "r" (val));
+}
+
+static void intstr0_write(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c2, c0, 0" : : "r" (val));
+}
+
+static void intstr1_write(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c3, c0, 0" : : "r" (val));
+}
+
+static void intbase_write(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c12, c0, 0" : : "r" (val));
+}
+
+static void intsize_write(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c13, c0, 0" : : "r" (val));
+}
+
+static void
+iop33x_irq_mask1 (struct irq_data *d)
+{
+	iop33x_mask0 &= ~(1 << d->irq);
+	intctl0_write(iop33x_mask0);
+}
+
+static void
+iop33x_irq_mask2 (struct irq_data *d)
+{
+	iop33x_mask1 &= ~(1 << (d->irq - 32));
+	intctl1_write(iop33x_mask1);
+}
+
+static void
+iop33x_irq_unmask1(struct irq_data *d)
+{
+	iop33x_mask0 |= 1 << d->irq;
+	intctl0_write(iop33x_mask0);
+}
+
+static void
+iop33x_irq_unmask2(struct irq_data *d)
+{
+	iop33x_mask1 |= (1 << (d->irq - 32));
+	intctl1_write(iop33x_mask1);
+}
+
+struct irq_chip iop33x_irqchip1 = {
+	.name		= "IOP33x-1",
+	.irq_ack	= iop33x_irq_mask1,
+	.irq_mask	= iop33x_irq_mask1,
+	.irq_unmask	= iop33x_irq_unmask1,
+};
+
+struct irq_chip iop33x_irqchip2 = {
+	.name		= "IOP33x-2",
+	.irq_ack	= iop33x_irq_mask2,
+	.irq_mask	= iop33x_irq_mask2,
+	.irq_unmask	= iop33x_irq_unmask2,
+};
+
+void __init iop33x_init_irq(void)
+{
+	int i;
+
+	iop_init_cp6_handler();
+
+	intctl0_write(0);
+	intctl1_write(0);
+	intstr0_write(0);
+	intstr1_write(0);
+	intbase_write(0);
+	intsize_write(1);
+	if (machine_is_iq80331())
+		*IOP3XX_PCIIRSR = 0x0f;
+
+	for (i = 0; i < NR_IRQS; i++) {
+		irq_set_chip_and_handler(i,
+					 (i < 32) ? &iop33x_irqchip1 : &iop33x_irqchip2,
+					 handle_level_irq);
+		irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
+	}
+}
diff --git a/arch/arm/mach-iop33x/uart.c b/arch/arm/mach-iop33x/uart.c
new file mode 100644
index 000000000..bbf54d794
--- /dev/null
+++ b/arch/arm/mach-iop33x/uart.c
@@ -0,0 +1,103 @@
+/*
+ * arch/arm/mach-iop33x/uart.c
+ *
+ * Author: Dave Jiang (dave.jiang@intel.com)
+ * Copyright (C) 2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/io.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <mach/hardware.h>
+#include <asm/hardware/iop3xx.h>
+#include <asm/mach/arch.h>
+
+#define IOP33X_UART_XTAL 33334000
+
+static struct plat_serial8250_port iop33x_uart0_data[] = {
+	{
+		.membase	= (char *)IOP33X_UART0_VIRT,
+		.mapbase	= IOP33X_UART0_PHYS,
+		.irq		= IRQ_IOP33X_UART0,
+		.uartclk	= IOP33X_UART_XTAL,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_SKIP_TEST,
+	},
+	{ },
+};
+
+static struct resource iop33x_uart0_resources[] = {
+	[0] = {
+		.start	= IOP33X_UART0_PHYS,
+		.end	= IOP33X_UART0_PHYS + 0x3f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_IOP33X_UART0,
+		.end	= IRQ_IOP33X_UART0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device iop33x_uart0_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+		.platform_data		= iop33x_uart0_data,
+	},
+	.num_resources	= 2,
+	.resource	= iop33x_uart0_resources,
+};
+
+
+static struct resource iop33x_uart1_resources[] = {
+	[0] = {
+		.start	= IOP33X_UART1_PHYS,
+		.end	= IOP33X_UART1_PHYS + 0x3f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_IOP33X_UART1,
+		.end	= IRQ_IOP33X_UART1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct plat_serial8250_port iop33x_uart1_data[] = {
+	{
+		.membase	= (char *)IOP33X_UART1_VIRT,
+		.mapbase	= IOP33X_UART1_PHYS,
+		.irq		= IRQ_IOP33X_UART1,
+		.uartclk	= IOP33X_UART_XTAL,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_SKIP_TEST,
+	},
+	{ },
+};
+
+struct platform_device iop33x_uart1_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM1,
+	.dev		= {
+		.platform_data		= iop33x_uart1_data,
+	},
+	.num_resources	= 2,
+	.resource	= iop33x_uart1_resources,
+};