Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

15 files changed, 2045 insertions, 0 deletions

diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h
new file mode 100644
index 000000000..25fc9c258
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/include/mach/dma.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2003-2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#include <linux/device.h>
+
+/* We use `virtual` dma channels to hide the fact we have only a limited
+ * number of DMA channels, and not of all of them (dependent on the device)
+ * can be attached to any DMA source. We therefore let the DMA core handle
+ * the allocation of hardware channels to clients.
+*/
+
+enum dma_ch {
+	DMACH_XD0 = 0,
+	DMACH_XD1,
+	DMACH_SDI,
+	DMACH_SPI0,
+	DMACH_SPI1,
+	DMACH_UART0,
+	DMACH_UART1,
+	DMACH_UART2,
+	DMACH_TIMER,
+	DMACH_I2S_IN,
+	DMACH_I2S_OUT,
+	DMACH_PCM_IN,
+	DMACH_PCM_OUT,
+	DMACH_MIC_IN,
+	DMACH_USB_EP1,
+	DMACH_USB_EP2,
+	DMACH_USB_EP3,
+	DMACH_USB_EP4,
+	DMACH_UART0_SRC2,	/* s3c2412 second uart sources */
+	DMACH_UART1_SRC2,
+	DMACH_UART2_SRC2,
+	DMACH_UART3,		/* s3c2443 has extra uart */
+	DMACH_UART3_SRC2,
+	DMACH_SPI0_TX,		/* s3c2443/2416/2450 hsspi0 */
+	DMACH_SPI0_RX,		/* s3c2443/2416/2450 hsspi0 */
+	DMACH_SPI1_TX,		/* s3c2443/2450 hsspi1 */
+	DMACH_SPI1_RX,		/* s3c2443/2450 hsspi1 */
+	DMACH_MAX,		/* the end entry */
+};
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/fb.h b/arch/arm/mach-s3c24xx/include/mach/fb.h
new file mode 100644
index 000000000..4e539cb8b
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/include/mach/fb.h
@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <plat/fb-s3c2410.h>
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-samsung.h b/arch/arm/mach-s3c24xx/include/mach/gpio-samsung.h
new file mode 100644
index 000000000..2ad22b2d4
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/include/mach/gpio-samsung.h
@@ -0,0 +1,101 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - GPIO lib support
+ */
+
+/* some boards require extra gpio capacity to support external
+ * devices that need GPIO.
+ */
+
+#ifndef GPIO_SAMSUNG_S3C24XX_H
+#define GPIO_SAMSUNG_S3C24XX_H
+
+/*
+ * GPIO sizes for various SoCs:
+ *
+ *   2410 2412 2440 2443 2416
+ *             2442
+ *   ---- ---- ---- ---- ----
+ * A  23   22   25   16   27
+ * B  11   11   11   11   11
+ * C  16   16   16   16   16
+ * D  16   16   16   16   16
+ * E  16   16   16   16   16
+ * F  8    8    8    8    8
+ * G  16   16   16   16   8
+ * H  11   11   11   15   15
+ * J  --   --   13   16   --
+ * K  --   --   --   --   16
+ * L  --   --   --   15   14
+ * M  --   --   --   2    2
+ */
+
+/* GPIO bank sizes */
+
+#define S3C2410_GPIO_A_NR	(32)
+#define S3C2410_GPIO_B_NR	(32)
+#define S3C2410_GPIO_C_NR	(32)
+#define S3C2410_GPIO_D_NR	(32)
+#define S3C2410_GPIO_E_NR	(32)
+#define S3C2410_GPIO_F_NR	(32)
+#define S3C2410_GPIO_G_NR	(32)
+#define S3C2410_GPIO_H_NR	(32)
+#define S3C2410_GPIO_J_NR	(32)	/* technically 16. */
+#define S3C2410_GPIO_K_NR	(32)	/* technically 16. */
+#define S3C2410_GPIO_L_NR	(32)	/* technically 15. */
+#define S3C2410_GPIO_M_NR	(32)	/* technically 2. */
+
+#if CONFIG_S3C_GPIO_SPACE != 0
+#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
+#endif
+
+#define S3C2410_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
+
+#ifndef __ASSEMBLY__
+
+enum s3c_gpio_number {
+	S3C2410_GPIO_A_START = 0,
+	S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
+	S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
+	S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
+	S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
+	S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
+	S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
+	S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
+	S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
+	S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J),
+	S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K),
+	S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L),
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* S3C2410 GPIO number definitions. */
+
+#define S3C2410_GPA(_nr)	(S3C2410_GPIO_A_START + (_nr))
+#define S3C2410_GPB(_nr)	(S3C2410_GPIO_B_START + (_nr))
+#define S3C2410_GPC(_nr)	(S3C2410_GPIO_C_START + (_nr))
+#define S3C2410_GPD(_nr)	(S3C2410_GPIO_D_START + (_nr))
+#define S3C2410_GPE(_nr)	(S3C2410_GPIO_E_START + (_nr))
+#define S3C2410_GPF(_nr)	(S3C2410_GPIO_F_START + (_nr))
+#define S3C2410_GPG(_nr)	(S3C2410_GPIO_G_START + (_nr))
+#define S3C2410_GPH(_nr)	(S3C2410_GPIO_H_START + (_nr))
+#define S3C2410_GPJ(_nr)	(S3C2410_GPIO_J_START + (_nr))
+#define S3C2410_GPK(_nr)	(S3C2410_GPIO_K_START + (_nr))
+#define S3C2410_GPL(_nr)	(S3C2410_GPIO_L_START + (_nr))
+#define S3C2410_GPM(_nr)	(S3C2410_GPIO_M_START + (_nr))
+
+#ifdef CONFIG_CPU_S3C244X
+#define S3C_GPIO_END	(S3C2410_GPJ(0) + 32)
+#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
+#define S3C_GPIO_END	(S3C2410_GPM(0) + 32)
+#else
+#define S3C_GPIO_END	(S3C2410_GPH(0) + 32)
+#endif
+
+#endif /* GPIO_SAMSUNG_S3C24XX_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/hardware.h b/arch/arm/mach-s3c24xx/include/mach/hardware.h
new file mode 100644
index 000000000..1b2975708
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+
+extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm/sizes.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/io.h b/arch/arm/mach-s3c24xx/include/mach/io.h
new file mode 100644
index 000000000..f960e6d10
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/include/mach/io.h
@@ -0,0 +1,212 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/arm/mach-s3c2410/include/mach/io.h
+ *  from arch/arm/mach-rpc/include/mach/io.h
+ *
+ * Copyright (C) 1997 Russell King
+ *	     (C) 2003 Simtec Electronics
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are above A28
+ * and are translated to the start of IO.  Note that all addresses are
+ * not shifted left!
+ */
+
+#define __PORT_PCIO(x)	((x) < (1<<28))
+
+#define PCIO_BASE	 (S3C24XX_VA_ISA_WORD)
+#define PCIO_BASE_b	 (S3C24XX_VA_ISA_BYTE)
+#define PCIO_BASE_w	 (S3C24XX_VA_ISA_WORD)
+#define PCIO_BASE_l	 (S3C24XX_VA_ISA_WORD)
+/*
+ * Dynamic IO functions - let the compiler
+ * optimize the expressions
+ */
+
+#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \
+static inline void __out##fnsuffix (unsigned int val, unsigned int port) \
+{ \
+	unsigned long temp;				      \
+	__asm__ __volatile__(				      \
+	"cmp	%2, #(1<<28)\n\t"			      \
+	"mov	%0, %2\n\t"				      \
+	"addcc	%0, %0, %3\n\t"				      \
+	"str" instr " %1, [%0, #0 ]	@ out" #fnsuffix      \
+	: "=&r" (temp)					      \
+	: "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix)  \
+	: "cc");					      \
+}
+
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr)				\
+static inline unsigned sz __in##fnsuffix (unsigned int port)		\
+{									\
+	unsigned long temp, value;					\
+	__asm__ __volatile__(						\
+	"cmp	%2, #(1<<28)\n\t"					\
+	"mov	%0, %2\n\t"						\
+	"addcc	%0, %0, %3\n\t"						\
+	"ldr" instr "	%1, [%0, #0 ]	@ in" #fnsuffix		\
+	: "=&r" (temp), "=r" (value)					\
+	: "r" (port), "Ir" (PCIO_BASE_##fnsuffix)	\
+	: "cc");							\
+	return (unsigned sz)value;					\
+}
+
+static inline void __iomem *__ioaddr (unsigned long port)
+{
+	return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port;
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr)	\
+	DECLARE_DYN_IN(sz,fnsuffix,instr) \
+	DECLARE_DYN_OUT(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"h")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port)						\
+({									\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"strb	%0, [%1, %2]	@ outbc"			\
+		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"strb	%0, [%1, #0]	@ outbc"			\
+		: : "r" (value), "r" ((port)));				\
+})
+
+#define __inbc(port)							\
+({									\
+	unsigned char result;						\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"ldrb	%0, [%1, %2]	@ inbc"				\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"ldrb	%0, [%1, #0]	@ inbc"				\
+		: "=r" (result) : "r" ((port)));			\
+	result;								\
+})
+
+#define __outwc(value,port)						\
+({									\
+	unsigned long v = value;					\
+	if (__PORT_PCIO((port))) {					\
+		if ((port) < 256 && (port) > -256)			\
+			__asm__ __volatile__(				\
+			"strh	%0, [%1, %2]	@ outwc"		\
+			: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
+		else if ((port) > 0)					\
+			__asm__ __volatile__(				\
+			"strh	%0, [%1, %2]	@ outwc"		\
+			: : "r" (v),					\
+			    "r" (PCIO_BASE + ((port) & ~0xff)),		\
+			     "Jr" (((port) & 0xff)));			\
+		else							\
+			__asm__ __volatile__(				\
+			"strh	%0, [%1, #0]	@ outwc"		\
+			: : "r" (v),					\
+			    "r" (PCIO_BASE + (port)));			\
+	} else								\
+		__asm__ __volatile__(					\
+		"strh	%0, [%1, #0]	@ outwc"			\
+		: : "r" (v), "r" ((port)));				\
+})
+
+#define __inwc(port)							\
+({									\
+	unsigned short result;						\
+	if (__PORT_PCIO((port))) {					\
+		if ((port) < 256 && (port) > -256 )			\
+			__asm__ __volatile__(				\
+			"ldrh	%0, [%1, %2]	@ inwc"			\
+			: "=r" (result)					\
+			: "r" (PCIO_BASE),				\
+			  "Jr" ((port)));				\
+		else if ((port) > 0)					\
+			__asm__ __volatile__(				\
+			"ldrh	%0, [%1, %2]	@ inwc"			\
+			: "=r" (result)					\
+			: "r" (PCIO_BASE + ((port) & ~0xff)),		\
+			  "Jr" (((port) & 0xff)));			\
+		else							\
+			__asm__ __volatile__(				\
+			"ldrh	%0, [%1, #0]	@ inwc"			\
+			: "=r" (result)					\
+			: "r" (PCIO_BASE + ((port))));			\
+	} else								\
+		__asm__ __volatile__(					\
+		"ldrh	%0, [%1, #0]	@ inwc"				\
+		: "=r" (result) : "r" ((port)));			\
+	result;								\
+})
+
+#define __outlc(value,port)						\
+({									\
+	unsigned long v = value;					\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"str	%0, [%1, %2]	@ outlc"			\
+		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"str	%0, [%1, #0]	@ outlc"			\
+		: : "r" (v), "r" ((port)));		\
+})
+
+#define __inlc(port)							\
+({									\
+	unsigned long result;						\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"ldr	%0, [%1, %2]	@ inlc"				\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"ldr	%0, [%1, #0]	@ inlc"				\
+		: "=r" (result) : "r" ((port)));		\
+	result;								\
+})
+
+#define __ioaddrc(port)	((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)0 + (port)))
+
+#define inb(p)		(__builtin_constant_p((p)) ? __inbc(p)	   : __inb(p))
+#define inw(p)		(__builtin_constant_p((p)) ? __inwc(p)	   : __inw(p))
+#define inl(p)		(__builtin_constant_p((p)) ? __inlc(p)	   : __inl(p))
+#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
+
+#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
+#define insl(p,d,l)	__raw_readsl(__ioaddr(p),d,l)
+
+#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
+#define outsl(p,d,l)	__raw_writesl(__ioaddr(p),d,l)
+
+#endif
diff --git a/arch/arm/mach-s3c24xx/include/mach/irqs.h b/arch/arm/mach-s3c24xx/include/mach/irqs.h
new file mode 100644
index 000000000..aaf3bae08
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/include/mach/irqs.h
@@ -0,0 +1,213 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ */
+
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ */
+
+#define S3C2410_CPUIRQ_OFFSET	 (16)
+
+#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET)
+
+/* main cpu interrupts */
+#define IRQ_EINT0      S3C2410_IRQ(0)	    /* 16 */
+#define IRQ_EINT1      S3C2410_IRQ(1)
+#define IRQ_EINT2      S3C2410_IRQ(2)
+#define IRQ_EINT3      S3C2410_IRQ(3)
+#define IRQ_EINT4t7    S3C2410_IRQ(4)	    /* 20 */
+#define IRQ_EINT8t23   S3C2410_IRQ(5)
+#define IRQ_RESERVED6  S3C2410_IRQ(6)	    /* for s3c2410 */
+#define IRQ_CAM        S3C2410_IRQ(6)	    /* for s3c2440,s3c2443 */
+#define IRQ_BATT_FLT   S3C2410_IRQ(7)
+#define IRQ_TICK       S3C2410_IRQ(8)	    /* 24 */
+#define IRQ_WDT	       S3C2410_IRQ(9)	    /* WDT/AC97 for s3c2443 */
+#define IRQ_TIMER0     S3C2410_IRQ(10)
+#define IRQ_TIMER1     S3C2410_IRQ(11)
+#define IRQ_TIMER2     S3C2410_IRQ(12)
+#define IRQ_TIMER3     S3C2410_IRQ(13)
+#define IRQ_TIMER4     S3C2410_IRQ(14)
+#define IRQ_UART2      S3C2410_IRQ(15)
+#define IRQ_LCD	       S3C2410_IRQ(16)	    /* 32 */
+#define IRQ_DMA0       S3C2410_IRQ(17)	    /* IRQ_DMA for s3c2443 */
+#define IRQ_DMA1       S3C2410_IRQ(18)
+#define IRQ_DMA2       S3C2410_IRQ(19)
+#define IRQ_DMA3       S3C2410_IRQ(20)
+#define IRQ_SDI	       S3C2410_IRQ(21)
+#define IRQ_SPI0       S3C2410_IRQ(22)
+#define IRQ_UART1      S3C2410_IRQ(23)
+#define IRQ_RESERVED24 S3C2410_IRQ(24)	    /* 40 */
+#define IRQ_NFCON      S3C2410_IRQ(24)	    /* for s3c2440 */
+#define IRQ_USBD       S3C2410_IRQ(25)
+#define IRQ_USBH       S3C2410_IRQ(26)
+#define IRQ_IIC	       S3C2410_IRQ(27)
+#define IRQ_UART0      S3C2410_IRQ(28)	    /* 44 */
+#define IRQ_SPI1       S3C2410_IRQ(29)
+#define IRQ_RTC	       S3C2410_IRQ(30)
+#define IRQ_ADCPARENT  S3C2410_IRQ(31)
+
+/* interrupts generated from the external interrupts sources */
+#define IRQ_EINT0_2412 S3C2410_IRQ(32)
+#define IRQ_EINT1_2412 S3C2410_IRQ(33)
+#define IRQ_EINT2_2412 S3C2410_IRQ(34)
+#define IRQ_EINT3_2412 S3C2410_IRQ(35)
+#define IRQ_EINT4      S3C2410_IRQ(36)	   /* 52 */
+#define IRQ_EINT5      S3C2410_IRQ(37)
+#define IRQ_EINT6      S3C2410_IRQ(38)
+#define IRQ_EINT7      S3C2410_IRQ(39)
+#define IRQ_EINT8      S3C2410_IRQ(40)
+#define IRQ_EINT9      S3C2410_IRQ(41)
+#define IRQ_EINT10     S3C2410_IRQ(42)
+#define IRQ_EINT11     S3C2410_IRQ(43)
+#define IRQ_EINT12     S3C2410_IRQ(44)
+#define IRQ_EINT13     S3C2410_IRQ(45)
+#define IRQ_EINT14     S3C2410_IRQ(46)
+#define IRQ_EINT15     S3C2410_IRQ(47)
+#define IRQ_EINT16     S3C2410_IRQ(48)
+#define IRQ_EINT17     S3C2410_IRQ(49)
+#define IRQ_EINT18     S3C2410_IRQ(50)
+#define IRQ_EINT19     S3C2410_IRQ(51)
+#define IRQ_EINT20     S3C2410_IRQ(52)	   /* 68 */
+#define IRQ_EINT21     S3C2410_IRQ(53)
+#define IRQ_EINT22     S3C2410_IRQ(54)
+#define IRQ_EINT23     S3C2410_IRQ(55)
+
+#define IRQ_EINT_BIT(x)	((x) - IRQ_EINT4 + 4)
+#define IRQ_EINT(x)    (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
+
+#define IRQ_LCD_FIFO   S3C2410_IRQ(56)
+#define IRQ_LCD_FRAME  S3C2410_IRQ(57)
+
+/* IRQs for the interal UARTs, and ADC
+ * these need to be ordered in number of appearance in the
+ * SUBSRC mask register
+*/
+
+#define S3C2410_IRQSUB(x)	S3C2410_IRQ((x)+58)
+
+#define IRQ_S3CUART_RX0		S3C2410_IRQSUB(0)	/* 74 */
+#define IRQ_S3CUART_TX0		S3C2410_IRQSUB(1)
+#define IRQ_S3CUART_ERR0	S3C2410_IRQSUB(2)
+
+#define IRQ_S3CUART_RX1		S3C2410_IRQSUB(3)	/* 77 */
+#define IRQ_S3CUART_TX1		S3C2410_IRQSUB(4)
+#define IRQ_S3CUART_ERR1	S3C2410_IRQSUB(5)
+
+#define IRQ_S3CUART_RX2		S3C2410_IRQSUB(6)	/* 80 */
+#define IRQ_S3CUART_TX2		S3C2410_IRQSUB(7)
+#define IRQ_S3CUART_ERR2	S3C2410_IRQSUB(8)
+
+#define IRQ_TC			S3C2410_IRQSUB(9)
+#define IRQ_ADC			S3C2410_IRQSUB(10)
+
+/* extra irqs for s3c2412 */
+
+#define IRQ_S3C2412_CFSDI	S3C2410_IRQ(21)
+
+#define IRQ_S3C2412_SDI		S3C2410_IRQSUB(13)
+#define IRQ_S3C2412_CF		S3C2410_IRQSUB(14)
+
+
+#define IRQ_S3C2416_EINT8t15	S3C2410_IRQ(5)
+#define IRQ_S3C2416_DMA		S3C2410_IRQ(17)
+#define IRQ_S3C2416_UART3	S3C2410_IRQ(18)
+#define IRQ_S3C2416_SDI1	S3C2410_IRQ(20)
+#define IRQ_S3C2416_SDI0	S3C2410_IRQ(21)
+
+#define IRQ_S3C2416_LCD2	S3C2410_IRQSUB(15)
+#define IRQ_S3C2416_LCD3	S3C2410_IRQSUB(16)
+#define IRQ_S3C2416_LCD4	S3C2410_IRQSUB(17)
+#define IRQ_S3C2416_DMA0	S3C2410_IRQSUB(18)
+#define IRQ_S3C2416_DMA1	S3C2410_IRQSUB(19)
+#define IRQ_S3C2416_DMA2	S3C2410_IRQSUB(20)
+#define IRQ_S3C2416_DMA3	S3C2410_IRQSUB(21)
+#define IRQ_S3C2416_DMA4	S3C2410_IRQSUB(22)
+#define IRQ_S3C2416_DMA5	S3C2410_IRQSUB(23)
+#define IRQ_S32416_WDT		S3C2410_IRQSUB(27)
+#define IRQ_S32416_AC97		S3C2410_IRQSUB(28)
+
+/* second interrupt-register of s3c2416/s3c2450 */
+
+#define S3C2416_IRQ(x)		S3C2410_IRQ((x) + 58 + 29)
+#define IRQ_S3C2416_2D		S3C2416_IRQ(0)
+#define IRQ_S3C2416_IIC1	S3C2416_IRQ(1)
+#define IRQ_S3C2416_RESERVED2	S3C2416_IRQ(2)
+#define IRQ_S3C2416_RESERVED3	S3C2416_IRQ(3)
+#define IRQ_S3C2416_PCM0	S3C2416_IRQ(4)
+#define IRQ_S3C2416_PCM1	S3C2416_IRQ(5)
+#define IRQ_S3C2416_I2S0	S3C2416_IRQ(6)
+#define IRQ_S3C2416_I2S1	S3C2416_IRQ(7)
+
+/* extra irqs for s3c2440 */
+
+#define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)	/* S3C2443 too */
+#define IRQ_S3C2440_CAM_P	S3C2410_IRQSUB(12)	/* S3C2443 too */
+#define IRQ_S3C2440_WDT		S3C2410_IRQSUB(13)
+#define IRQ_S3C2440_AC97	S3C2410_IRQSUB(14)
+
+/* irqs for s3c2443 */
+
+#define IRQ_S3C2443_DMA		S3C2410_IRQ(17)		/* IRQ_DMA1 */
+#define IRQ_S3C2443_UART3	S3C2410_IRQ(18)		/* IRQ_DMA2 */
+#define IRQ_S3C2443_CFCON	S3C2410_IRQ(19)		/* IRQ_DMA3 */
+#define IRQ_S3C2443_HSMMC	S3C2410_IRQ(20)		/* IRQ_SDI */
+#define IRQ_S3C2443_NAND	S3C2410_IRQ(24)		/* reserved */
+
+#define IRQ_S3C2416_HSMMC0	S3C2410_IRQ(21)		/* S3C2416/S3C2450 */
+
+#define IRQ_HSMMC0		IRQ_S3C2416_HSMMC0
+#define IRQ_HSMMC1		IRQ_S3C2443_HSMMC
+
+#define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
+#define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)
+#define IRQ_S3C2443_LCD3	S3C2410_IRQSUB(16)
+#define IRQ_S3C2443_LCD4	S3C2410_IRQSUB(17)
+
+#define IRQ_S3C2443_DMA0	S3C2410_IRQSUB(18)
+#define IRQ_S3C2443_DMA1	S3C2410_IRQSUB(19)
+#define IRQ_S3C2443_DMA2	S3C2410_IRQSUB(20)
+#define IRQ_S3C2443_DMA3	S3C2410_IRQSUB(21)
+#define IRQ_S3C2443_DMA4	S3C2410_IRQSUB(22)
+#define IRQ_S3C2443_DMA5	S3C2410_IRQSUB(23)
+
+/* UART3 */
+#define IRQ_S3C2443_RX3		S3C2410_IRQSUB(24)
+#define IRQ_S3C2443_TX3		S3C2410_IRQSUB(25)
+#define IRQ_S3C2443_ERR3	S3C2410_IRQSUB(26)
+
+#define IRQ_S3C2443_WDT		S3C2410_IRQSUB(27)
+#define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
+
+#if defined(CONFIG_CPU_S3C2416)
+#define NR_IRQS (IRQ_S3C2416_I2S1 + 1)
+#else
+#define NR_IRQS (IRQ_S3C2443_AC97 + 1)
+#endif
+
+/* compatibility define. */
+#define IRQ_UART3		IRQ_S3C2443_UART3
+#define IRQ_S3CUART_RX3		IRQ_S3C2443_RX3
+#define IRQ_S3CUART_TX3		IRQ_S3C2443_TX3
+#define IRQ_S3CUART_ERR3	IRQ_S3C2443_ERR3
+
+#define IRQ_LCD_VSYNC		IRQ_S3C2443_LCD3
+#define IRQ_LCD_SYSTEM		IRQ_S3C2443_LCD2
+
+#ifdef CONFIG_CPU_S3C2440
+#define IRQ_S3C244X_AC97 IRQ_S3C2440_AC97
+#else
+#define IRQ_S3C244X_AC97 IRQ_S3C2443_AC97
+#endif
+
+/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
+#define FIQ_START		IRQ_EINT0
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h
new file mode 100644
index 000000000..bca93112f
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/include/mach/map.h
@@ -0,0 +1,157 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - Memory map definitions
+ */
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H
+
+#include <plat/map-base.h>
+#include <plat/map-s3c.h>
+
+/*
+ * interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C2410_PA_IRQ		(0x4A000000)
+#define S3C24XX_SZ_IRQ		SZ_1M
+
+/* memory controller registers */
+#define S3C2410_PA_MEMCTRL	(0x48000000)
+#define S3C24XX_SZ_MEMCTRL	SZ_1M
+
+/* Timers */
+#define S3C2410_PA_TIMER	(0x51000000)
+#define S3C24XX_SZ_TIMER	SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_SZ_CLKPWR	SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV	(0x52000000)
+#define S3C24XX_SZ_USBDEV	SZ_1M
+
+/* Watchdog */
+#define S3C2410_PA_WATCHDOG	(0x53000000)
+#define S3C24XX_SZ_WATCHDOG	SZ_1M
+
+/* Standard size definitions for peripheral blocks. */
+
+#define S3C24XX_SZ_UART		SZ_1M
+#define S3C24XX_SZ_IIS		SZ_1M
+#define S3C24XX_SZ_ADC		SZ_1M
+#define S3C24XX_SZ_SPI		SZ_1M
+#define S3C24XX_SZ_SDI		SZ_1M
+#define S3C24XX_SZ_NAND		SZ_1M
+#define S3C24XX_SZ_GPIO		SZ_1M
+
+/* USB host controller */
+#define S3C2410_PA_USBHOST (0x49000000)
+
+/* S3C2416/S3C2443/S3C2450 High-Speed USB Gadget */
+#define S3C2416_PA_HSUDC	(0x49800000)
+#define S3C2416_SZ_HSUDC	(SZ_4K)
+
+/* DMA controller */
+#define S3C2410_PA_DMA	   (0x4B000000)
+#define S3C24XX_SZ_DMA	   SZ_1M
+
+/* Clock and Power management */
+#define S3C2410_PA_CLKPWR  (0x4C000000)
+
+/* LCD controller */
+#define S3C2410_PA_LCD	   (0x4D000000)
+#define S3C24XX_SZ_LCD	   SZ_1M
+
+/* NAND flash controller */
+#define S3C2410_PA_NAND	   (0x4E000000)
+
+/* IIC hardware controller */
+#define S3C2410_PA_IIC	   (0x54000000)
+
+/* IIS controller */
+#define S3C2410_PA_IIS	   (0x55000000)
+
+/* RTC */
+#define S3C2410_PA_RTC	   (0x57000000)
+#define S3C24XX_SZ_RTC	   SZ_1M
+
+/* ADC */
+#define S3C2410_PA_ADC	   (0x58000000)
+
+/* SPI */
+#define S3C2410_PA_SPI	   (0x59000000)
+#define S3C2443_PA_SPI0		(0x52000000)
+#define S3C2443_PA_SPI1		S3C2410_PA_SPI
+
+/* SDI */
+#define S3C2410_PA_SDI	   (0x5A000000)
+
+/* CAMIF */
+#define S3C2440_PA_CAMIF   (0x4F000000)
+#define S3C2440_SZ_CAMIF   SZ_1M
+
+/* AC97 */
+
+#define S3C2440_PA_AC97	   (0x5B000000)
+#define S3C2440_SZ_AC97	   SZ_1M
+
+/* S3C2443/S3C2416 High-speed SD/MMC */
+#define S3C2443_PA_HSMMC   (0x4A800000)
+#define S3C2416_PA_HSMMC0  (0x4AC00000)
+
+#define	S3C2443_PA_FB	(0x4C800000)
+
+/* S3C2412 memory and IO controls */
+#define S3C2412_PA_SSMC	(0x4F000000)
+
+#define S3C2412_PA_EBI	(0x48800000)
+
+/* physical addresses of all the chip-select areas */
+
+#define S3C2410_CS0 (0x00000000)
+#define S3C2410_CS1 (0x08000000)
+#define S3C2410_CS2 (0x10000000)
+#define S3C2410_CS3 (0x18000000)
+#define S3C2410_CS4 (0x20000000)
+#define S3C2410_CS5 (0x28000000)
+#define S3C2410_CS6 (0x30000000)
+#define S3C2410_CS7 (0x38000000)
+
+#define S3C2410_SDRAM_PA    (S3C2410_CS6)
+
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#define S3C24XX_PA_IRQ      S3C2410_PA_IRQ
+#define S3C24XX_PA_MEMCTRL  S3C2410_PA_MEMCTRL
+#define S3C24XX_PA_DMA      S3C2410_PA_DMA
+#define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
+#define S3C24XX_PA_LCD      S3C2410_PA_LCD
+#define S3C24XX_PA_TIMER    S3C2410_PA_TIMER
+#define S3C24XX_PA_USBDEV   S3C2410_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
+#define S3C24XX_PA_IIS      S3C2410_PA_IIS
+#define S3C24XX_PA_RTC      S3C2410_PA_RTC
+#define S3C24XX_PA_ADC      S3C2410_PA_ADC
+#define S3C24XX_PA_SPI      S3C2410_PA_SPI
+#define S3C24XX_PA_SPI1		(S3C2410_PA_SPI + S3C2410_SPI1)
+#define S3C24XX_PA_SDI      S3C2410_PA_SDI
+#define S3C24XX_PA_NAND	    S3C2410_PA_NAND
+
+#define S3C_PA_FB	    S3C2443_PA_FB
+#define S3C_PA_IIC          S3C2410_PA_IIC
+#define S3C_PA_USBHOST	S3C2410_PA_USBHOST
+#define S3C_PA_HSMMC0	    S3C2416_PA_HSMMC0
+#define S3C_PA_HSMMC1	    S3C2443_PA_HSMMC
+#define S3C_PA_WDT	    S3C2410_PA_WATCHDOG
+#define S3C_PA_NAND	    S3C24XX_PA_NAND
+
+#define S3C_PA_SPI0		S3C2443_PA_SPI0
+#define S3C_PA_SPI1		S3C2443_PA_SPI1
+
+#define SAMSUNG_PA_TIMER	S3C2410_PA_TIMER
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/pm-core.h b/arch/arm/mach-s3c24xx/include/mach/pm-core.h
new file mode 100644
index 000000000..5e4ce89d0
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/include/mach/pm-core.h
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C24xx - PM core support for arch/arm/plat-s3c/pm.c
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "regs-clock.h"
+#include "regs-irq.h"
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+	unsigned long tmp = __raw_readl(S3C2410_CLKCON);
+
+	/* re-start uart clocks */
+	tmp |= S3C2410_CLKCON_UART0;
+	tmp |= S3C2410_CLKCON_UART1;
+	tmp |= S3C2410_CLKCON_UART2;
+
+	__raw_writel(tmp, S3C2410_CLKCON);
+	udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+	__raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
+	__raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
+
+	/* ack any outstanding external interrupts before we go to sleep */
+
+	__raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
+	__raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
+	__raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
+
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+	__raw_writel(0x00, S3C2410_CLKCON);  /* turn off clocks over sleep */
+}
+
+/* s3c2410_pm_show_resume_irqs
+ *
+ * print any IRQs asserted at resume time (ie, we woke from)
+*/
+static inline void s3c_pm_show_resume_irqs(int start, unsigned long which,
+					   unsigned long mask)
+{
+	int i;
+
+	which &= ~mask;
+
+	for (i = 0; i <= 31; i++) {
+		if (which & (1L<<i)) {
+			S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
+		}
+	}
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+	S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n",
+		  __raw_readl(S3C2410_SRCPND),
+		  __raw_readl(S3C2410_EINTPEND));
+
+	s3c_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
+				s3c_irqwake_intmask);
+
+	s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
+				s3c_irqwake_eintmask);
+}
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					   struct pm_uart_save *save)
+{
+}
+
+static inline void s3c_pm_restored_gpios(void) { }
+static inline void samsung_pm_saved_gpios(void) { }
+
+/* state for IRQs over sleep */
+
+/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
+ *
+ * set bit to 1 in allow bitfield to enable the wakeup settings on it
+*/
+#ifdef CONFIG_PM_SLEEP
+#define s3c_irqwake_intallow	(1L << 30 | 0xfL)
+#define s3c_irqwake_eintallow	(0x0000fff0L)
+#else
+#define s3c_irqwake_eintallow 0
+#define s3c_irqwake_intallow  0
+#endif
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h
new file mode 100644
index 000000000..7ca3dd4f1
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h
@@ -0,0 +1,144 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C2410 clock register definitions
+ */
+
+#ifndef __ASM_ARM_REGS_CLOCK
+#define __ASM_ARM_REGS_CLOCK
+
+#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s)))
+
+#define S3C2410_LOCKTIME    S3C2410_CLKREG(0x00)
+#define S3C2410_MPLLCON	    S3C2410_CLKREG(0x04)
+#define S3C2410_UPLLCON	    S3C2410_CLKREG(0x08)
+#define S3C2410_CLKCON	    S3C2410_CLKREG(0x0C)
+#define S3C2410_CLKSLOW	    S3C2410_CLKREG(0x10)
+#define S3C2410_CLKDIVN	    S3C2410_CLKREG(0x14)
+
+#define S3C2410_CLKCON_IDLE	     (1<<2)
+#define S3C2410_CLKCON_POWER	     (1<<3)
+#define S3C2410_CLKCON_NAND	     (1<<4)
+#define S3C2410_CLKCON_LCDC	     (1<<5)
+#define S3C2410_CLKCON_USBH	     (1<<6)
+#define S3C2410_CLKCON_USBD	     (1<<7)
+#define S3C2410_CLKCON_PWMT	     (1<<8)
+#define S3C2410_CLKCON_SDI	     (1<<9)
+#define S3C2410_CLKCON_UART0	     (1<<10)
+#define S3C2410_CLKCON_UART1	     (1<<11)
+#define S3C2410_CLKCON_UART2	     (1<<12)
+#define S3C2410_CLKCON_GPIO	     (1<<13)
+#define S3C2410_CLKCON_RTC	     (1<<14)
+#define S3C2410_CLKCON_ADC	     (1<<15)
+#define S3C2410_CLKCON_IIC	     (1<<16)
+#define S3C2410_CLKCON_IIS	     (1<<17)
+#define S3C2410_CLKCON_SPI	     (1<<18)
+
+#define S3C2410_CLKDIVN_PDIVN	     (1<<0)
+#define S3C2410_CLKDIVN_HDIVN	     (1<<1)
+
+#define S3C2410_CLKSLOW_UCLK_OFF	(1<<7)
+#define S3C2410_CLKSLOW_MPLL_OFF	(1<<5)
+#define S3C2410_CLKSLOW_SLOW		(1<<4)
+#define S3C2410_CLKSLOW_SLOWVAL(x)	(x)
+#define S3C2410_CLKSLOW_GET_SLOWVAL(x)	((x) & 7)
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+
+/* extra registers */
+#define S3C2440_CAMDIVN	    S3C2410_CLKREG(0x18)
+
+#define S3C2440_CLKCON_CAMERA        (1<<19)
+#define S3C2440_CLKCON_AC97          (1<<20)
+
+#define S3C2440_CLKDIVN_PDIVN	     (1<<0)
+#define S3C2440_CLKDIVN_HDIVN_MASK   (3<<1)
+#define S3C2440_CLKDIVN_HDIVN_1      (0<<1)
+#define S3C2440_CLKDIVN_HDIVN_2      (1<<1)
+#define S3C2440_CLKDIVN_HDIVN_4_8    (2<<1)
+#define S3C2440_CLKDIVN_HDIVN_3_6    (3<<1)
+#define S3C2440_CLKDIVN_UCLK         (1<<3)
+
+#define S3C2440_CAMDIVN_CAMCLK_MASK  (0xf<<0)
+#define S3C2440_CAMDIVN_CAMCLK_SEL   (1<<4)
+#define S3C2440_CAMDIVN_HCLK3_HALF   (1<<8)
+#define S3C2440_CAMDIVN_HCLK4_HALF   (1<<9)
+#define S3C2440_CAMDIVN_DVSEN        (1<<12)
+
+#define S3C2442_CAMDIVN_CAMCLK_DIV3  (1<<5)
+
+#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */
+
+#if defined(CONFIG_CPU_S3C2412)
+
+#define S3C2412_OSCSET		S3C2410_CLKREG(0x18)
+#define S3C2412_CLKSRC		S3C2410_CLKREG(0x1C)
+
+#define S3C2412_PLLCON_OFF		(1<<20)
+
+#define S3C2412_CLKDIVN_PDIVN		(1<<2)
+#define S3C2412_CLKDIVN_HDIVN_MASK	(3<<0)
+#define S3C2412_CLKDIVN_ARMDIVN		(1<<3)
+#define S3C2412_CLKDIVN_DVSEN		(1<<4)
+#define S3C2412_CLKDIVN_HALFHCLK	(1<<5)
+#define S3C2412_CLKDIVN_USB48DIV	(1<<6)
+#define S3C2412_CLKDIVN_UARTDIV_MASK	(15<<8)
+#define S3C2412_CLKDIVN_UARTDIV_SHIFT	(8)
+#define S3C2412_CLKDIVN_I2SDIV_MASK	(15<<12)
+#define S3C2412_CLKDIVN_I2SDIV_SHIFT	(12)
+#define S3C2412_CLKDIVN_CAMDIV_MASK	(15<<16)
+#define S3C2412_CLKDIVN_CAMDIV_SHIFT	(16)
+
+#define S3C2412_CLKCON_WDT		(1<<28)
+#define S3C2412_CLKCON_SPI		(1<<27)
+#define S3C2412_CLKCON_IIS		(1<<26)
+#define S3C2412_CLKCON_IIC		(1<<25)
+#define S3C2412_CLKCON_ADC		(1<<24)
+#define S3C2412_CLKCON_RTC		(1<<23)
+#define S3C2412_CLKCON_GPIO		(1<<22)
+#define S3C2412_CLKCON_UART2		(1<<21)
+#define S3C2412_CLKCON_UART1		(1<<20)
+#define S3C2412_CLKCON_UART0		(1<<19)
+#define S3C2412_CLKCON_SDI		(1<<18)
+#define S3C2412_CLKCON_PWMT		(1<<17)
+#define S3C2412_CLKCON_USBD		(1<<16)
+#define S3C2412_CLKCON_CAMCLK		(1<<15)
+#define S3C2412_CLKCON_UARTCLK		(1<<14)
+/* missing 13 */
+#define S3C2412_CLKCON_USB_HOST48	(1<<12)
+#define S3C2412_CLKCON_USB_DEV48	(1<<11)
+#define S3C2412_CLKCON_HCLKdiv2		(1<<10)
+#define S3C2412_CLKCON_HCLKx2		(1<<9)
+#define S3C2412_CLKCON_SDRAM		(1<<8)
+/* missing 7 */
+#define S3C2412_CLKCON_USBH		S3C2410_CLKCON_USBH
+#define S3C2412_CLKCON_LCDC		S3C2410_CLKCON_LCDC
+#define S3C2412_CLKCON_NAND		S3C2410_CLKCON_NAND
+#define S3C2412_CLKCON_DMA3		(1<<3)
+#define S3C2412_CLKCON_DMA2		(1<<2)
+#define S3C2412_CLKCON_DMA1		(1<<1)
+#define S3C2412_CLKCON_DMA0		(1<<0)
+
+/* clock sourec controls */
+
+#define S3C2412_CLKSRC_EXTCLKDIV_MASK		(7 << 0)
+#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT		(0)
+#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV	(1<<3)
+#define S3C2412_CLKSRC_MSYSCLK_MPLL		(1<<4)
+#define S3C2412_CLKSRC_USYSCLK_UPLL		(1<<5)
+#define S3C2412_CLKSRC_UARTCLK_MPLL		(1<<8)
+#define S3C2412_CLKSRC_I2SCLK_MPLL		(1<<9)
+#define S3C2412_CLKSRC_USBCLK_HCLK		(1<<10)
+#define S3C2412_CLKSRC_CAMCLK_HCLK		(1<<11)
+#define S3C2412_CLKSRC_UREFCLK_EXTCLK	(1<<12)
+#define S3C2412_CLKSRC_EREFCLK_EXTCLK	(1<<14)
+
+#endif /* CONFIG_CPU_S3C2412 */
+
+#define S3C2416_CLKDIV2		S3C2410_CLKREG(0x28)
+
+#endif /* __ASM_ARM_REGS_CLOCK */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
new file mode 100644
index 000000000..594e967c0
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
@@ -0,0 +1,606 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003-2004 Simtec Electronics <linux@simtec.co.uk>
+ *	http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * S3C2410 GPIO register definitions
+ */
+
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H
+
+#define S3C24XX_MISCCR		S3C24XX_GPIOREG2(0x80)
+
+/* general configuration options */
+
+#define S3C2410_GPIO_LEAVE   (0xFFFFFFFF)
+#define S3C2410_GPIO_INPUT   (0xFFFFFFF0)	/* not available on A */
+#define S3C2410_GPIO_OUTPUT  (0xFFFFFFF1)
+#define S3C2410_GPIO_IRQ     (0xFFFFFFF2)	/* not available for all */
+#define S3C2410_GPIO_SFN2    (0xFFFFFFF2)	/* bank A => addr/cs/nand */
+#define S3C2410_GPIO_SFN3    (0xFFFFFFF3)	/* not available on A */
+
+/* register address for the GPIO registers.
+ * S3C24XX_GPIOREG2 is for the second set of registers in the
+ * GPIO which move between s3c2410 and s3c2412 type systems */
+
+#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
+#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
+
+
+/* configure GPIO ports A..G */
+
+/* port A - S3C2410: 22bits, zero in bit X makes pin X output
+ * 1 makes port special function, this is default
+*/
+#define S3C2410_GPACON	   S3C2410_GPIOREG(0x00)
+#define S3C2410_GPADAT	   S3C2410_GPIOREG(0x04)
+
+#define S3C2410_GPA0_ADDR0   (1<<0)
+#define S3C2410_GPA1_ADDR16  (1<<1)
+#define S3C2410_GPA2_ADDR17  (1<<2)
+#define S3C2410_GPA3_ADDR18  (1<<3)
+#define S3C2410_GPA4_ADDR19  (1<<4)
+#define S3C2410_GPA5_ADDR20  (1<<5)
+#define S3C2410_GPA6_ADDR21  (1<<6)
+#define S3C2410_GPA7_ADDR22  (1<<7)
+#define S3C2410_GPA8_ADDR23  (1<<8)
+#define S3C2410_GPA9_ADDR24  (1<<9)
+#define S3C2410_GPA10_ADDR25 (1<<10)
+#define S3C2410_GPA11_ADDR26 (1<<11)
+#define S3C2410_GPA12_nGCS1  (1<<12)
+#define S3C2410_GPA13_nGCS2  (1<<13)
+#define S3C2410_GPA14_nGCS3  (1<<14)
+#define S3C2410_GPA15_nGCS4  (1<<15)
+#define S3C2410_GPA16_nGCS5  (1<<16)
+#define S3C2410_GPA17_CLE    (1<<17)
+#define S3C2410_GPA18_ALE    (1<<18)
+#define S3C2410_GPA19_nFWE   (1<<19)
+#define S3C2410_GPA20_nFRE   (1<<20)
+#define S3C2410_GPA21_nRSTOUT (1<<21)
+#define S3C2410_GPA22_nFCE   (1<<22)
+
+/* 0x08 and 0x0c are reserved on S3C2410 */
+
+/* S3C2410:
+ * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
+ *   00 = input, 01 = output, 10=special function, 11=reserved
+
+ * bit 0,1 = pin 0, 2,3= pin 1...
+ *
+ * CPBUP = pull up resistor control, 1=disabled, 0=enabled
+*/
+
+#define S3C2410_GPBCON	   S3C2410_GPIOREG(0x10)
+#define S3C2410_GPBDAT	   S3C2410_GPIOREG(0x14)
+#define S3C2410_GPBUP	   S3C2410_GPIOREG(0x18)
+
+/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
+
+#define S3C2410_GPB0_TOUT0   (0x02 << 0)
+
+#define S3C2410_GPB1_TOUT1   (0x02 << 2)
+
+#define S3C2410_GPB2_TOUT2   (0x02 << 4)
+
+#define S3C2410_GPB3_TOUT3   (0x02 << 6)
+
+#define S3C2410_GPB4_TCLK0   (0x02 << 8)
+#define S3C2410_GPB4_MASK    (0x03 << 8)
+
+#define S3C2410_GPB5_nXBACK  (0x02 << 10)
+#define S3C2443_GPB5_XBACK   (0x03 << 10)
+
+#define S3C2410_GPB6_nXBREQ  (0x02 << 12)
+#define S3C2443_GPB6_XBREQ   (0x03 << 12)
+
+#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
+#define S3C2443_GPB7_XDACK1  (0x03 << 14)
+
+#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
+
+#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
+#define S3C2443_GPB9_XDACK0  (0x03 << 18)
+
+#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
+#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
+
+#define S3C2410_GPB_PUPDIS(x)  (1<<(x))
+
+/* Port C consits of 16 GPIO/Special function
+ *
+ * almost identical setup to port b, but the special functions are mostly
+ * to do with the video system's sync/etc.
+*/
+
+#define S3C2410_GPCCON	   S3C2410_GPIOREG(0x20)
+#define S3C2410_GPCDAT	   S3C2410_GPIOREG(0x24)
+#define S3C2410_GPCUP	   S3C2410_GPIOREG(0x28)
+#define S3C2410_GPC0_LEND	(0x02 << 0)
+#define S3C2410_GPC1_VCLK	(0x02 << 2)
+#define S3C2410_GPC2_VLINE	(0x02 << 4)
+#define S3C2410_GPC3_VFRAME	(0x02 << 6)
+#define S3C2410_GPC4_VM		(0x02 << 8)
+#define S3C2410_GPC5_LCDVF0	(0x02 << 10)
+#define S3C2410_GPC6_LCDVF1	(0x02 << 12)
+#define S3C2410_GPC7_LCDVF2	(0x02 << 14)
+#define S3C2410_GPC8_VD0	(0x02 << 16)
+#define S3C2410_GPC9_VD1	(0x02 << 18)
+#define S3C2410_GPC10_VD2	(0x02 << 20)
+#define S3C2410_GPC11_VD3	(0x02 << 22)
+#define S3C2410_GPC12_VD4	(0x02 << 24)
+#define S3C2410_GPC13_VD5	(0x02 << 26)
+#define S3C2410_GPC14_VD6	(0x02 << 28)
+#define S3C2410_GPC15_VD7	(0x02 << 30)
+#define S3C2410_GPC_PUPDIS(x)  (1<<(x))
+
+/*
+ * S3C2410: Port D consists of 16 GPIO/Special function
+ *
+ * almost identical setup to port b, but the special functions are mostly
+ * to do with the video system's data.
+ *
+ * almost identical setup to port c
+*/
+
+#define S3C2410_GPDCON	   S3C2410_GPIOREG(0x30)
+#define S3C2410_GPDDAT	   S3C2410_GPIOREG(0x34)
+#define S3C2410_GPDUP	   S3C2410_GPIOREG(0x38)
+
+#define S3C2410_GPD0_VD8	(0x02 << 0)
+#define S3C2442_GPD0_nSPICS1	(0x03 << 0)
+
+#define S3C2410_GPD1_VD9	(0x02 << 2)
+#define S3C2442_GPD1_SPICLK1	(0x03 << 2)
+
+#define S3C2410_GPD2_VD10	(0x02 << 4)
+
+#define S3C2410_GPD3_VD11	(0x02 << 6)
+
+#define S3C2410_GPD4_VD12	(0x02 << 8)
+
+#define S3C2410_GPD5_VD13	(0x02 << 10)
+
+#define S3C2410_GPD6_VD14	(0x02 << 12)
+
+#define S3C2410_GPD7_VD15	(0x02 << 14)
+
+#define S3C2410_GPD8_VD16	(0x02 << 16)
+#define S3C2440_GPD8_SPIMISO1	(0x03 << 16)
+
+#define S3C2410_GPD9_VD17	(0x02 << 18)
+#define S3C2440_GPD9_SPIMOSI1	(0x03 << 18)
+
+#define S3C2410_GPD10_VD18	(0x02 << 20)
+#define S3C2440_GPD10_SPICLK1	(0x03 << 20)
+
+#define S3C2410_GPD11_VD19	(0x02 << 22)
+
+#define S3C2410_GPD12_VD20	(0x02 << 24)
+
+#define S3C2410_GPD13_VD21	(0x02 << 26)
+
+#define S3C2410_GPD14_VD22	(0x02 << 28)
+#define S3C2410_GPD14_nSS1	(0x03 << 28)
+
+#define S3C2410_GPD15_VD23	(0x02 << 30)
+#define S3C2410_GPD15_nSS0	(0x03 << 30)
+
+#define S3C2410_GPD_PUPDIS(x)  (1<<(x))
+
+/* S3C2410:
+ * Port E consists of 16 GPIO/Special function
+ *
+ * again, the same as port B, but dealing with I2S, SDI, and
+ * more miscellaneous functions
+ *
+ * GPIO / interrupt inputs
+*/
+
+#define S3C2410_GPECON	   S3C2410_GPIOREG(0x40)
+#define S3C2410_GPEDAT	   S3C2410_GPIOREG(0x44)
+#define S3C2410_GPEUP	   S3C2410_GPIOREG(0x48)
+
+#define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
+#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
+#define S3C2410_GPE0_MASK      (0x03 << 0)
+
+#define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
+#define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
+#define S3C2410_GPE1_MASK      (0x03 << 2)
+
+#define S3C2410_GPE2_CDCLK     (0x02 << 4)
+#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
+
+#define S3C2410_GPE3_I2SSDI    (0x02 << 6)
+#define S3C2443_GPE3_AC_SDI    (0x03 << 6)
+#define S3C2410_GPE3_nSS0      (0x03 << 6)
+#define S3C2410_GPE3_MASK      (0x03 << 6)
+
+#define S3C2410_GPE4_I2SSDO    (0x02 << 8)
+#define S3C2443_GPE4_AC_SDO    (0x03 << 8)
+#define S3C2410_GPE4_I2SSDI    (0x03 << 8)
+#define S3C2410_GPE4_MASK      (0x03 << 8)
+
+#define S3C2410_GPE5_SDCLK     (0x02 << 10)
+#define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
+#define S3C2443_GPE5_AC_BITCLK (0x03 << 10)
+
+#define S3C2410_GPE6_SDCMD     (0x02 << 12)
+#define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
+#define S3C2443_GPE6_AC_SDI    (0x03 << 12)
+
+#define S3C2410_GPE7_SDDAT0    (0x02 << 14)
+#define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
+#define S3C2443_GPE7_AC_SDO    (0x03 << 14)
+
+#define S3C2410_GPE8_SDDAT1    (0x02 << 16)
+#define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
+#define S3C2443_GPE8_AC_SYNC   (0x03 << 16)
+
+#define S3C2410_GPE9_SDDAT2    (0x02 << 18)
+#define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
+#define S3C2443_GPE9_AC_nRESET (0x03 << 18)
+
+#define S3C2410_GPE10_SDDAT3   (0x02 << 20)
+#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
+
+#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
+
+#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
+
+#define S3C2410_GPE13_SPICLK0  (0x02 << 26)
+
+#define S3C2410_GPE14_IICSCL   (0x02 << 28)
+#define S3C2410_GPE14_MASK     (0x03 << 28)
+
+#define S3C2410_GPE15_IICSDA   (0x02 << 30)
+#define S3C2410_GPE15_MASK     (0x03 << 30)
+
+#define S3C2440_GPE0_ACSYNC    (0x03 << 0)
+#define S3C2440_GPE1_ACBITCLK  (0x03 << 2)
+#define S3C2440_GPE2_ACRESET   (0x03 << 4)
+#define S3C2440_GPE3_ACIN      (0x03 << 6)
+#define S3C2440_GPE4_ACOUT     (0x03 << 8)
+
+#define S3C2410_GPE_PUPDIS(x)  (1<<(x))
+
+/* S3C2410:
+ * Port F consists of 8 GPIO/Special function
+ *
+ * GPIO / interrupt inputs
+ *
+ * GPFCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
+ *
+ * pull up works like all other ports.
+ *
+ * GPIO/serial/misc pins
+*/
+
+#define S3C2410_GPFCON	   S3C2410_GPIOREG(0x50)
+#define S3C2410_GPFDAT	   S3C2410_GPIOREG(0x54)
+#define S3C2410_GPFUP	   S3C2410_GPIOREG(0x58)
+
+#define S3C2410_GPF0_EINT0  (0x02 << 0)
+#define S3C2410_GPF1_EINT1  (0x02 << 2)
+#define S3C2410_GPF2_EINT2  (0x02 << 4)
+#define S3C2410_GPF3_EINT3  (0x02 << 6)
+#define S3C2410_GPF4_EINT4  (0x02 << 8)
+#define S3C2410_GPF5_EINT5  (0x02 << 10)
+#define S3C2410_GPF6_EINT6  (0x02 << 12)
+#define S3C2410_GPF7_EINT7  (0x02 << 14)
+#define S3C2410_GPF_PUPDIS(x)  (1<<(x))
+
+/* S3C2410:
+ * Port G consists of 8 GPIO/IRQ/Special function
+ *
+ * GPGCON has 2 bits for each of the input pins on port G
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2410_GPGCON	   S3C2410_GPIOREG(0x60)
+#define S3C2410_GPGDAT	   S3C2410_GPIOREG(0x64)
+#define S3C2410_GPGUP	   S3C2410_GPIOREG(0x68)
+
+#define S3C2410_GPG0_EINT8    (0x02 << 0)
+
+#define S3C2410_GPG1_EINT9    (0x02 << 2)
+
+#define S3C2410_GPG2_EINT10   (0x02 << 4)
+#define S3C2410_GPG2_nSS0     (0x03 << 4)
+
+#define S3C2410_GPG3_EINT11   (0x02 << 6)
+#define S3C2410_GPG3_nSS1     (0x03 << 6)
+
+#define S3C2410_GPG4_EINT12   (0x02 << 8)
+#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
+#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
+
+#define S3C2410_GPG5_EINT13   (0x02 << 10)
+#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
+
+#define S3C2410_GPG6_EINT14   (0x02 << 12)
+#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
+
+#define S3C2410_GPG7_EINT15   (0x02 << 14)
+#define S3C2410_GPG7_SPICLK1  (0x03 << 14)
+
+#define S3C2410_GPG8_EINT16   (0x02 << 16)
+
+#define S3C2410_GPG9_EINT17   (0x02 << 18)
+
+#define S3C2410_GPG10_EINT18  (0x02 << 20)
+
+#define S3C2410_GPG11_EINT19  (0x02 << 22)
+#define S3C2410_GPG11_TCLK1   (0x03 << 22)
+#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
+
+#define S3C2410_GPG12_EINT20  (0x02 << 24)
+#define S3C2410_GPG12_XMON    (0x03 << 24)
+#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
+#define S3C2443_GPG12_nINPACK (0x03 << 24)
+
+#define S3C2410_GPG13_EINT21  (0x02 << 26)
+#define S3C2410_GPG13_nXPON   (0x03 << 26)
+#define S3C2443_GPG13_CF_nREG (0x03 << 26)
+
+#define S3C2410_GPG14_EINT22  (0x02 << 28)
+#define S3C2410_GPG14_YMON    (0x03 << 28)
+#define S3C2443_GPG14_CF_RESET (0x03 << 28)
+
+#define S3C2410_GPG15_EINT23  (0x02 << 30)
+#define S3C2410_GPG15_nYPON   (0x03 << 30)
+#define S3C2443_GPG15_CF_PWR  (0x03 << 30)
+
+#define S3C2410_GPG_PUPDIS(x)  (1<<(x))
+
+/* Port H consists of11 GPIO/serial/Misc pins
+ *
+ * GPHCON has 2 bits for each of the input pins on port H
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2410_GPHCON	   S3C2410_GPIOREG(0x70)
+#define S3C2410_GPHDAT	   S3C2410_GPIOREG(0x74)
+#define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
+
+#define S3C2410_GPH0_nCTS0  (0x02 << 0)
+#define S3C2416_GPH0_TXD0  (0x02 << 0)
+
+#define S3C2410_GPH1_nRTS0  (0x02 << 2)
+#define S3C2416_GPH1_RXD0  (0x02 << 2)
+
+#define S3C2410_GPH2_TXD0   (0x02 << 4)
+#define S3C2416_GPH2_TXD1   (0x02 << 4)
+
+#define S3C2410_GPH3_RXD0   (0x02 << 6)
+#define S3C2416_GPH3_RXD1   (0x02 << 6)
+
+#define S3C2410_GPH4_TXD1   (0x02 << 8)
+#define S3C2416_GPH4_TXD2   (0x02 << 8)
+
+#define S3C2410_GPH5_RXD1   (0x02 << 10)
+#define S3C2416_GPH5_RXD2   (0x02 << 10)
+
+#define S3C2410_GPH6_TXD2   (0x02 << 12)
+#define S3C2416_GPH6_TXD3   (0x02 << 12)
+#define S3C2410_GPH6_nRTS1  (0x03 << 12)
+#define S3C2416_GPH6_nRTS2  (0x03 << 12)
+
+#define S3C2410_GPH7_RXD2   (0x02 << 14)
+#define S3C2416_GPH7_RXD3   (0x02 << 14)
+#define S3C2410_GPH7_nCTS1  (0x03 << 14)
+#define S3C2416_GPH7_nCTS2  (0x03 << 14)
+
+#define S3C2410_GPH8_UCLK   (0x02 << 16)
+#define S3C2416_GPH8_nCTS0  (0x02 << 16)
+
+#define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
+#define S3C2442_GPH9_nSPICS0  (0x03 << 18)
+#define S3C2416_GPH9_nRTS0    (0x02 << 18)
+
+#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
+#define S3C2416_GPH10_nCTS1   (0x02 << 20)
+
+#define S3C2416_GPH11_nRTS1   (0x02 << 22)
+
+#define S3C2416_GPH12_EXTUARTCLK (0x02 << 24)
+
+#define S3C2416_GPH13_CLKOUT0 (0x02 << 26)
+
+#define S3C2416_GPH14_CLKOUT1 (0x02 << 28)
+
+/* The S3C2412 and S3C2413 move the GPJ register set to after
+ * GPH, which means all registers after 0x80 are now offset by 0x10
+ * for the 2412/2413 from the 2410/2440/2442
+*/
+
+/*
+ * Port J consists of 13 GPIO/Camera pins. GPJCON has 2 bits
+ * for each of the pins on port J.
+ *   00 - input, 01 output, 10 - camera
+ *
+ * Pull up works like all other ports.
+ */
+
+#define S3C2413_GPJCON	   S3C2410_GPIOREG(0x80)
+#define S3C2413_GPJDAT	   S3C2410_GPIOREG(0x84)
+#define S3C2413_GPJUP	   S3C2410_GPIOREG(0x88)
+#define S3C2413_GPJSLPCON  S3C2410_GPIOREG(0x8C)
+
+/* S3C2443 and above */
+#define S3C2440_GPJCON	   S3C2410_GPIOREG(0xD0)
+#define S3C2440_GPJDAT	   S3C2410_GPIOREG(0xD4)
+#define S3C2440_GPJUP	   S3C2410_GPIOREG(0xD8)
+
+#define S3C2443_GPKCON	   S3C2410_GPIOREG(0xE0)
+#define S3C2443_GPKDAT	   S3C2410_GPIOREG(0xE4)
+#define S3C2443_GPKUP	   S3C2410_GPIOREG(0xE8)
+
+#define S3C2443_GPLCON	   S3C2410_GPIOREG(0xF0)
+#define S3C2443_GPLDAT	   S3C2410_GPIOREG(0xF4)
+#define S3C2443_GPLUP	   S3C2410_GPIOREG(0xF8)
+
+#define S3C2443_GPMCON	   S3C2410_GPIOREG(0x100)
+#define S3C2443_GPMDAT	   S3C2410_GPIOREG(0x104)
+#define S3C2443_GPMUP	   S3C2410_GPIOREG(0x108)
+
+/* miscellaneous control */
+#define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
+
+/* see clock.h for dclk definitions */
+
+/* pullup control on databus */
+#define S3C2410_MISCCR_SPUCR_HEN    (0<<0)
+#define S3C2410_MISCCR_SPUCR_HDIS   (1<<0)
+#define S3C2410_MISCCR_SPUCR_LEN    (0<<1)
+#define S3C2410_MISCCR_SPUCR_LDIS   (1<<1)
+
+#define S3C2410_MISCCR_USBDEV	    (0<<3)
+#define S3C2410_MISCCR_USBHOST	    (1<<3)
+
+#define S3C2410_MISCCR_CLK0_MPLL    (0<<4)
+#define S3C2410_MISCCR_CLK0_UPLL    (1<<4)
+#define S3C2410_MISCCR_CLK0_FCLK    (2<<4)
+#define S3C2410_MISCCR_CLK0_HCLK    (3<<4)
+#define S3C2410_MISCCR_CLK0_PCLK    (4<<4)
+#define S3C2410_MISCCR_CLK0_DCLK0   (5<<4)
+#define S3C2410_MISCCR_CLK0_MASK    (7<<4)
+
+#define S3C2412_MISCCR_CLK0_RTC	    (2<<4)
+
+#define S3C2410_MISCCR_CLK1_MPLL    (0<<8)
+#define S3C2410_MISCCR_CLK1_UPLL    (1<<8)
+#define S3C2410_MISCCR_CLK1_FCLK    (2<<8)
+#define S3C2410_MISCCR_CLK1_HCLK    (3<<8)
+#define S3C2410_MISCCR_CLK1_PCLK    (4<<8)
+#define S3C2410_MISCCR_CLK1_DCLK1   (5<<8)
+#define S3C2410_MISCCR_CLK1_MASK    (7<<8)
+
+#define S3C2412_MISCCR_CLK1_CLKsrc  (0<<8)
+
+#define S3C2410_MISCCR_USBSUSPND0   (1<<12)
+#define S3C2416_MISCCR_SEL_SUSPND   (1<<12)
+#define S3C2410_MISCCR_USBSUSPND1   (1<<13)
+
+#define S3C2410_MISCCR_nRSTCON	    (1<<16)
+
+#define S3C2410_MISCCR_nEN_SCLK0    (1<<17)
+#define S3C2410_MISCCR_nEN_SCLK1    (1<<18)
+#define S3C2410_MISCCR_nEN_SCLKE    (1<<19)	/* not 2412 */
+#define S3C2410_MISCCR_SDSLEEP	    (7<<17)
+
+#define S3C2416_MISCCR_FLT_I2C      (1<<24)
+#define S3C2416_MISCCR_HSSPI_EN2    (1<<31)
+
+/* external interrupt control... */
+/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
+ * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
+ * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
+ *
+ * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
+ *
+ * Samsung datasheet p9-25
+*/
+#define S3C2410_EXTINT0	   S3C2410_GPIOREG(0x88)
+#define S3C2410_EXTINT1	   S3C2410_GPIOREG(0x8C)
+#define S3C2410_EXTINT2	   S3C2410_GPIOREG(0x90)
+
+#define S3C24XX_EXTINT0	   S3C24XX_GPIOREG2(0x88)
+#define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
+#define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
+
+/* interrupt filtering control for EINT16..EINT23 */
+#define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
+#define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)
+#define S3C2410_EINFLT2	   S3C2410_GPIOREG(0x9C)
+#define S3C2410_EINFLT3	   S3C2410_GPIOREG(0xA0)
+
+#define S3C24XX_EINFLT0	   S3C24XX_GPIOREG2(0x94)
+#define S3C24XX_EINFLT1	   S3C24XX_GPIOREG2(0x98)
+#define S3C24XX_EINFLT2	   S3C24XX_GPIOREG2(0x9C)
+#define S3C24XX_EINFLT3	   S3C24XX_GPIOREG2(0xA0)
+
+/* values for interrupt filtering */
+#define S3C2410_EINTFLT_PCLK		(0x00)
+#define S3C2410_EINTFLT_EXTCLK		(1<<7)
+#define S3C2410_EINTFLT_WIDTHMSK(x)	((x) & 0x3f)
+
+/* removed EINTxxxx defs from here, not meant for this */
+
+/* GSTATUS have miscellaneous information in them
+ *
+ * These move between s3c2410 and s3c2412 style systems.
+ */
+
+#define S3C2410_GSTATUS0   S3C2410_GPIOREG(0x0AC)
+#define S3C2410_GSTATUS1   S3C2410_GPIOREG(0x0B0)
+#define S3C2410_GSTATUS2   S3C2410_GPIOREG(0x0B4)
+#define S3C2410_GSTATUS3   S3C2410_GPIOREG(0x0B8)
+#define S3C2410_GSTATUS4   S3C2410_GPIOREG(0x0BC)
+
+#define S3C2412_GSTATUS0   S3C2410_GPIOREG(0x0BC)
+#define S3C2412_GSTATUS1   S3C2410_GPIOREG(0x0C0)
+#define S3C2412_GSTATUS2   S3C2410_GPIOREG(0x0C4)
+#define S3C2412_GSTATUS3   S3C2410_GPIOREG(0x0C8)
+#define S3C2412_GSTATUS4   S3C2410_GPIOREG(0x0CC)
+
+#define S3C24XX_GSTATUS0   S3C24XX_GPIOREG2(0x0AC)
+#define S3C24XX_GSTATUS1   S3C24XX_GPIOREG2(0x0B0)
+#define S3C24XX_GSTATUS2   S3C24XX_GPIOREG2(0x0B4)
+#define S3C24XX_GSTATUS3   S3C24XX_GPIOREG2(0x0B8)
+#define S3C24XX_GSTATUS4   S3C24XX_GPIOREG2(0x0BC)
+
+#define S3C2410_GSTATUS0_nWAIT	   (1<<3)
+#define S3C2410_GSTATUS0_NCON	   (1<<2)
+#define S3C2410_GSTATUS0_RnB	   (1<<1)
+#define S3C2410_GSTATUS0_nBATTFLT  (1<<0)
+
+#define S3C2410_GSTATUS1_IDMASK	   (0xffff0000)
+#define S3C2410_GSTATUS1_2410	   (0x32410000)
+#define S3C2410_GSTATUS1_2412	   (0x32412001)
+#define S3C2410_GSTATUS1_2416	   (0x32416003)
+#define S3C2410_GSTATUS1_2440	   (0x32440000)
+#define S3C2410_GSTATUS1_2442	   (0x32440aaa)
+/* some 2416 CPUs report this value also */
+#define S3C2410_GSTATUS1_2450	   (0x32450003)
+
+#define S3C2410_GSTATUS2_WTRESET   (1<<2)
+#define S3C2410_GSTATUS2_OFFRESET  (1<<1)
+#define S3C2410_GSTATUS2_PONRESET  (1<<0)
+
+/* 2412/2413 sleep configuration registers */
+
+#define S3C2412_GPBSLPCON	S3C2410_GPIOREG(0x1C)
+#define S3C2412_GPCSLPCON	S3C2410_GPIOREG(0x2C)
+#define S3C2412_GPDSLPCON	S3C2410_GPIOREG(0x3C)
+#define S3C2412_GPFSLPCON	S3C2410_GPIOREG(0x5C)
+#define S3C2412_GPGSLPCON	S3C2410_GPIOREG(0x6C)
+#define S3C2412_GPHSLPCON	S3C2410_GPIOREG(0x7C)
+
+/* definitions for each pin bit */
+#define S3C2412_GPIO_SLPCON_LOW	 ( 0x00 )
+#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
+#define S3C2412_GPIO_SLPCON_IN   ( 0x02 )
+#define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
+
+#define S3C2412_SLPCON_LOW(x)	( 0x00 << ((x) * 2))
+#define S3C2412_SLPCON_HIGH(x)	( 0x01 << ((x) * 2))
+#define S3C2412_SLPCON_IN(x)	( 0x02 << ((x) * 2))
+#define S3C2412_SLPCON_PULL(x)	( 0x03 << ((x) * 2))
+#define S3C2412_SLPCON_EINT(x)	( 0x02 << ((x) * 2))  /* only IRQ pins */
+#define S3C2412_SLPCON_MASK(x)	( 0x03 << ((x) * 2))
+
+#define S3C2412_SLPCON_ALL_LOW	(0x0)
+#define S3C2412_SLPCON_ALL_HIGH	(0x11111111 | 0x44444444)
+#define S3C2412_SLPCON_ALL_IN  	(0x22222222 | 0x88888888)
+#define S3C2412_SLPCON_ALL_PULL	(0x33333333)
+
+#endif	/* __ASM_ARCH_REGS_GPIO_H */
+
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-irq.h b/arch/arm/mach-s3c24xx/include/mach/regs-irq.h
new file mode 100644
index 000000000..8d8e669e3
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-irq.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ */
+
+
+#ifndef ___ASM_ARCH_REGS_IRQ_H
+#define ___ASM_ARCH_REGS_IRQ_H
+
+/* interrupt controller */
+
+#define S3C2410_IRQREG(x)   ((x) + S3C24XX_VA_IRQ)
+#define S3C2410_EINTREG(x)  ((x) + S3C24XX_VA_GPIO)
+#define S3C24XX_EINTREG(x)  ((x) + S3C24XX_VA_GPIO2)
+
+#define S3C2410_SRCPND	       S3C2410_IRQREG(0x000)
+#define S3C2410_INTMOD	       S3C2410_IRQREG(0x004)
+#define S3C2410_INTMSK	       S3C2410_IRQREG(0x008)
+#define S3C2410_PRIORITY       S3C2410_IRQREG(0x00C)
+#define S3C2410_INTPND	       S3C2410_IRQREG(0x010)
+#define S3C2410_INTOFFSET      S3C2410_IRQREG(0x014)
+#define S3C2410_SUBSRCPND      S3C2410_IRQREG(0x018)
+#define S3C2410_INTSUBMSK      S3C2410_IRQREG(0x01C)
+
+#define S3C2416_PRIORITY_MODE1		S3C2410_IRQREG(0x030)
+#define S3C2416_PRIORITY_UPDATE1	S3C2410_IRQREG(0x034)
+#define S3C2416_SRCPND2			S3C2410_IRQREG(0x040)
+#define S3C2416_INTMOD2			S3C2410_IRQREG(0x044)
+#define S3C2416_INTMSK2			S3C2410_IRQREG(0x048)
+#define S3C2416_INTPND2			S3C2410_IRQREG(0x050)
+#define S3C2416_INTOFFSET2		S3C2410_IRQREG(0x054)
+#define S3C2416_PRIORITY_MODE2		S3C2410_IRQREG(0x070)
+#define S3C2416_PRIORITY_UPDATE2	S3C2410_IRQREG(0x074)
+
+/* mask: 0=enable, 1=disable
+ * 1 bit EINT, 4=EINT4, 23=EINT23
+ * EINT0,1,2,3 are not handled here.
+*/
+
+#define S3C2410_EINTMASK       S3C2410_EINTREG(0x0A4)
+#define S3C2410_EINTPEND       S3C2410_EINTREG(0X0A8)
+#define S3C2412_EINTMASK       S3C2410_EINTREG(0x0B4)
+#define S3C2412_EINTPEND       S3C2410_EINTREG(0X0B8)
+
+#define S3C24XX_EINTMASK       S3C24XX_EINTREG(0x0A4)
+#define S3C24XX_EINTPEND       S3C24XX_EINTREG(0X0A8)
+
+#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h b/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h
new file mode 100644
index 000000000..4c3434f26
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h
@@ -0,0 +1,157 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ */
+
+#ifndef ___ASM_ARCH_REGS_LCD_H
+#define ___ASM_ARCH_REGS_LCD_H
+
+#define S3C2410_LCDREG(x)	(x)
+
+/* LCD control registers */
+#define S3C2410_LCDCON1	    S3C2410_LCDREG(0x00)
+#define S3C2410_LCDCON2	    S3C2410_LCDREG(0x04)
+#define S3C2410_LCDCON3	    S3C2410_LCDREG(0x08)
+#define S3C2410_LCDCON4	    S3C2410_LCDREG(0x0C)
+#define S3C2410_LCDCON5	    S3C2410_LCDREG(0x10)
+
+#define S3C2410_LCDCON1_CLKVAL(x)  ((x) << 8)
+#define S3C2410_LCDCON1_MMODE	   (1<<7)
+#define S3C2410_LCDCON1_DSCAN4	   (0<<5)
+#define S3C2410_LCDCON1_STN4	   (1<<5)
+#define S3C2410_LCDCON1_STN8	   (2<<5)
+#define S3C2410_LCDCON1_TFT	   (3<<5)
+
+#define S3C2410_LCDCON1_STN1BPP	   (0<<1)
+#define S3C2410_LCDCON1_STN2GREY   (1<<1)
+#define S3C2410_LCDCON1_STN4GREY   (2<<1)
+#define S3C2410_LCDCON1_STN8BPP	   (3<<1)
+#define S3C2410_LCDCON1_STN12BPP   (4<<1)
+
+#define S3C2410_LCDCON1_TFT1BPP	   (8<<1)
+#define S3C2410_LCDCON1_TFT2BPP	   (9<<1)
+#define S3C2410_LCDCON1_TFT4BPP	   (10<<1)
+#define S3C2410_LCDCON1_TFT8BPP	   (11<<1)
+#define S3C2410_LCDCON1_TFT16BPP   (12<<1)
+#define S3C2410_LCDCON1_TFT24BPP   (13<<1)
+
+#define S3C2410_LCDCON1_ENVID	   (1)
+
+#define S3C2410_LCDCON1_MODEMASK    0x1E
+
+#define S3C2410_LCDCON2_VBPD(x)	    ((x) << 24)
+#define S3C2410_LCDCON2_LINEVAL(x)  ((x) << 14)
+#define S3C2410_LCDCON2_VFPD(x)	    ((x) << 6)
+#define S3C2410_LCDCON2_VSPW(x)	    ((x) << 0)
+
+#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF)
+#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >>  6) & 0xFF)
+#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >>  0) & 0x3F)
+
+#define S3C2410_LCDCON3_HBPD(x)	    ((x) << 19)
+#define S3C2410_LCDCON3_WDLY(x)	    ((x) << 19)
+#define S3C2410_LCDCON3_HOZVAL(x)   ((x) << 8)
+#define S3C2410_LCDCON3_HFPD(x)	    ((x) << 0)
+#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0)
+
+#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F)
+#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >>  0) & 0xFF)
+
+/* LDCCON4 changes for STN mode on the S3C2412 */
+
+#define S3C2410_LCDCON4_MVAL(x)	    ((x) << 8)
+#define S3C2410_LCDCON4_HSPW(x)	    ((x) << 0)
+#define S3C2410_LCDCON4_WLH(x)	    ((x) << 0)
+
+#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >>  0) & 0xFF)
+
+#define S3C2410_LCDCON5_BPP24BL	    (1<<12)
+#define S3C2410_LCDCON5_FRM565	    (1<<11)
+#define S3C2410_LCDCON5_INVVCLK	    (1<<10)
+#define S3C2410_LCDCON5_INVVLINE    (1<<9)
+#define S3C2410_LCDCON5_INVVFRAME   (1<<8)
+#define S3C2410_LCDCON5_INVVD	    (1<<7)
+#define S3C2410_LCDCON5_INVVDEN	    (1<<6)
+#define S3C2410_LCDCON5_INVPWREN    (1<<5)
+#define S3C2410_LCDCON5_INVLEND	    (1<<4)
+#define S3C2410_LCDCON5_PWREN	    (1<<3)
+#define S3C2410_LCDCON5_ENLEND	    (1<<2)
+#define S3C2410_LCDCON5_BSWP	    (1<<1)
+#define S3C2410_LCDCON5_HWSWP	    (1<<0)
+
+/* framebuffer start addressed */
+#define S3C2410_LCDSADDR1   S3C2410_LCDREG(0x14)
+#define S3C2410_LCDSADDR2   S3C2410_LCDREG(0x18)
+#define S3C2410_LCDSADDR3   S3C2410_LCDREG(0x1C)
+
+#define S3C2410_LCDBANK(x)	((x) << 21)
+#define S3C2410_LCDBASEU(x)	(x)
+
+#define S3C2410_OFFSIZE(x)	((x) << 11)
+#define S3C2410_PAGEWIDTH(x)	(x)
+
+/* colour lookup and miscellaneous controls */
+
+#define S3C2410_REDLUT	   S3C2410_LCDREG(0x20)
+#define S3C2410_GREENLUT   S3C2410_LCDREG(0x24)
+#define S3C2410_BLUELUT	   S3C2410_LCDREG(0x28)
+
+#define S3C2410_DITHMODE   S3C2410_LCDREG(0x4C)
+#define S3C2410_TPAL	   S3C2410_LCDREG(0x50)
+
+#define S3C2410_TPAL_EN		(1<<24)
+
+/* interrupt info */
+#define S3C2410_LCDINTPND  S3C2410_LCDREG(0x54)
+#define S3C2410_LCDSRCPND  S3C2410_LCDREG(0x58)
+#define S3C2410_LCDINTMSK  S3C2410_LCDREG(0x5C)
+#define S3C2410_LCDINT_FIWSEL	(1<<2)
+#define	S3C2410_LCDINT_FRSYNC	(1<<1)
+#define S3C2410_LCDINT_FICNT	(1<<0)
+
+/* s3c2442 extra stn registers */
+
+#define S3C2442_REDLUT		S3C2410_LCDREG(0x20)
+#define S3C2442_GREENLUT	S3C2410_LCDREG(0x24)
+#define S3C2442_BLUELUT		S3C2410_LCDREG(0x28)
+#define S3C2442_DITHMODE	S3C2410_LCDREG(0x20)
+
+#define S3C2410_LPCSEL	   S3C2410_LCDREG(0x60)
+
+#define S3C2410_TFTPAL(x)  S3C2410_LCDREG((0x400 + (x)*4))
+
+/* S3C2412 registers */
+
+#define S3C2412_TPAL		S3C2410_LCDREG(0x20)
+
+#define S3C2412_LCDINTPND	S3C2410_LCDREG(0x24)
+#define S3C2412_LCDSRCPND	S3C2410_LCDREG(0x28)
+#define S3C2412_LCDINTMSK	S3C2410_LCDREG(0x2C)
+
+#define S3C2412_TCONSEL		S3C2410_LCDREG(0x30)
+
+#define S3C2412_LCDCON6		S3C2410_LCDREG(0x34)
+#define S3C2412_LCDCON7		S3C2410_LCDREG(0x38)
+#define S3C2412_LCDCON8		S3C2410_LCDREG(0x3C)
+#define S3C2412_LCDCON9		S3C2410_LCDREG(0x40)
+
+#define S3C2412_REDLUT(x)	S3C2410_LCDREG(0x44 + ((x)*4))
+#define S3C2412_GREENLUT(x)	S3C2410_LCDREG(0x60 + ((x)*4))
+#define S3C2412_BLUELUT(x)	S3C2410_LCDREG(0x98 + ((x)*4))
+
+#define S3C2412_FRCPAT(x)	S3C2410_LCDREG(0xB4 + ((x)*4))
+
+/* general registers */
+
+/* base of the LCD registers, where INTPND, INTSRC and then INTMSK
+ * are available. */
+
+#define S3C2410_LCDINTBASE	S3C2410_LCDREG(0x54)
+#define S3C2412_LCDINTBASE	S3C2410_LCDREG(0x24)
+
+#define S3C24XX_LCDINTPND	(0x00)
+#define S3C24XX_LCDSRCPND	(0x04)
+#define S3C24XX_LCDINTMSK	(0x08)
+
+#endif /* ___ASM_ARCH_REGS_LCD_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
new file mode 100644
index 000000000..6bf924612
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
@@ -0,0 +1,188 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C2443 clock register definitions
+ */
+
+#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
+#define __ASM_ARM_REGS_S3C2443_CLOCK
+
+#define S3C2443_CLKREG(x)		((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2443_PLLCON_MDIVSHIFT	16
+#define S3C2443_PLLCON_PDIVSHIFT	8
+#define S3C2443_PLLCON_SDIVSHIFT	0
+#define S3C2443_PLLCON_MDIVMASK		((1<<(1+(23-16)))-1)
+#define S3C2443_PLLCON_PDIVMASK		((1<<(1+(9-8)))-1)
+#define S3C2443_PLLCON_SDIVMASK		(3)
+
+#define S3C2443_MPLLCON			S3C2443_CLKREG(0x10)
+#define S3C2443_EPLLCON			S3C2443_CLKREG(0x18)
+#define S3C2443_CLKSRC			S3C2443_CLKREG(0x20)
+#define S3C2443_CLKDIV0			S3C2443_CLKREG(0x24)
+#define S3C2443_CLKDIV1			S3C2443_CLKREG(0x28)
+#define S3C2443_HCLKCON			S3C2443_CLKREG(0x30)
+#define S3C2443_PCLKCON			S3C2443_CLKREG(0x34)
+#define S3C2443_SCLKCON			S3C2443_CLKREG(0x38)
+#define S3C2443_PWRMODE			S3C2443_CLKREG(0x40)
+#define S3C2443_SWRST			S3C2443_CLKREG(0x44)
+#define S3C2443_BUSPRI0			S3C2443_CLKREG(0x50)
+#define S3C2443_SYSID			S3C2443_CLKREG(0x5C)
+#define S3C2443_PWRCFG			S3C2443_CLKREG(0x60)
+#define S3C2443_RSTCON			S3C2443_CLKREG(0x64)
+#define S3C2443_PHYCTRL			S3C2443_CLKREG(0x80)
+#define S3C2443_PHYPWR			S3C2443_CLKREG(0x84)
+#define S3C2443_URSTCON			S3C2443_CLKREG(0x88)
+#define S3C2443_UCLKCON			S3C2443_CLKREG(0x8C)
+
+#define S3C2443_PLLCON_OFF		(1<<24)
+
+#define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<7)
+#define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<7)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<7)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<7)
+#define S3C2443_CLKSRC_EPLLREF_MASK	(3<<7)
+
+#define S3C2443_CLKSRC_EXTCLK_DIV	(1<<3)
+
+#define S3C2443_CLKDIV0_HALF_HCLK	(1<<3)
+#define S3C2443_CLKDIV0_HALF_PCLK	(1<<2)
+
+#define S3C2443_CLKDIV0_HCLKDIV_MASK	(3<<0)
+
+#define S3C2443_CLKDIV0_EXTDIV_MASK	(3<<6)
+#define S3C2443_CLKDIV0_EXTDIV_SHIFT	(6)
+
+#define S3C2443_CLKDIV0_PREDIV_MASK	(3<<4)
+#define S3C2443_CLKDIV0_PREDIV_SHIFT	(4)
+
+#define S3C2416_CLKDIV0_ARMDIV_MASK	(7 << 9)
+#define S3C2443_CLKDIV0_ARMDIV_MASK	(15<<9)
+#define S3C2443_CLKDIV0_ARMDIV_SHIFT	(9)
+#define S3C2443_CLKDIV0_ARMDIV_1	(0<<9)
+#define S3C2443_CLKDIV0_ARMDIV_2	(8<<9)
+#define S3C2443_CLKDIV0_ARMDIV_3	(2<<9)
+#define S3C2443_CLKDIV0_ARMDIV_4	(9<<9)
+#define S3C2443_CLKDIV0_ARMDIV_6	(10<<9)
+#define S3C2443_CLKDIV0_ARMDIV_8	(11<<9)
+#define S3C2443_CLKDIV0_ARMDIV_12	(13<<9)
+#define S3C2443_CLKDIV0_ARMDIV_16	(15<<9)
+
+/* S3C2443_CLKDIV1 removed, only used in clock.c code */
+
+#define S3C2443_CLKCON_NAND
+
+#define S3C2443_HCLKCON_DMA0		(1<<0)
+#define S3C2443_HCLKCON_DMA1		(1<<1)
+#define S3C2443_HCLKCON_DMA2		(1<<2)
+#define S3C2443_HCLKCON_DMA3		(1<<3)
+#define S3C2443_HCLKCON_DMA4		(1<<4)
+#define S3C2443_HCLKCON_DMA5		(1<<5)
+#define S3C2443_HCLKCON_CAMIF		(1<<8)
+#define S3C2443_HCLKCON_LCDC		(1<<9)
+#define S3C2443_HCLKCON_USBH		(1<<11)
+#define S3C2443_HCLKCON_USBD		(1<<12)
+#define S3C2416_HCLKCON_HSMMC0		(1<<15)
+#define S3C2443_HCLKCON_HSMMC		(1<<16)
+#define S3C2443_HCLKCON_CFC		(1<<17)
+#define S3C2443_HCLKCON_SSMC		(1<<18)
+#define S3C2443_HCLKCON_DRAMC		(1<<19)
+
+#define S3C2443_PCLKCON_UART0		(1<<0)
+#define S3C2443_PCLKCON_UART1		(1<<1)
+#define S3C2443_PCLKCON_UART2		(1<<2)
+#define S3C2443_PCLKCON_UART3		(1<<3)
+#define S3C2443_PCLKCON_IIC		(1<<4)
+#define S3C2443_PCLKCON_SDI		(1<<5)
+#define S3C2443_PCLKCON_HSSPI		(1<<6)
+#define S3C2443_PCLKCON_ADC		(1<<7)
+#define S3C2443_PCLKCON_AC97		(1<<8)
+#define S3C2443_PCLKCON_IIS		(1<<9)
+#define S3C2443_PCLKCON_PWMT		(1<<10)
+#define S3C2443_PCLKCON_WDT		(1<<11)
+#define S3C2443_PCLKCON_RTC		(1<<12)
+#define S3C2443_PCLKCON_GPIO		(1<<13)
+#define S3C2443_PCLKCON_SPI0		(1<<14)
+#define S3C2443_PCLKCON_SPI1		(1<<15)
+
+#define S3C2443_SCLKCON_DDRCLK		(1<<16)
+#define S3C2443_SCLKCON_SSMCCLK		(1<<15)
+#define S3C2443_SCLKCON_HSSPICLK	(1<<14)
+#define S3C2443_SCLKCON_HSMMCCLK_EXT	(1<<13)
+#define S3C2443_SCLKCON_HSMMCCLK_EPLL	(1<<12)
+#define S3C2443_SCLKCON_CAMCLK		(1<<11)
+#define S3C2443_SCLKCON_DISPCLK		(1<<10)
+#define S3C2443_SCLKCON_I2SCLK		(1<<9)
+#define S3C2443_SCLKCON_UARTCLK		(1<<8)
+#define S3C2443_SCLKCON_USBHOST		(1<<1)
+
+#define S3C2443_PWRCFG_SLEEP		(1<<15)
+
+#define S3C2443_PWRCFG_USBPHY		(1 << 4)
+
+#define S3C2443_URSTCON_FUNCRST		(1 << 2)
+#define S3C2443_URSTCON_PHYRST		(1 << 0)
+
+#define S3C2443_PHYCTRL_CLKSEL		(1 << 3)
+#define S3C2443_PHYCTRL_EXTCLK		(1 << 2)
+#define S3C2443_PHYCTRL_PLLSEL		(1 << 1)
+#define S3C2443_PHYCTRL_DSPORT		(1 << 0)
+
+#define S3C2443_PHYPWR_COMMON_ON	(1 << 31)
+#define S3C2443_PHYPWR_ANALOG_PD	(1 << 4)
+#define S3C2443_PHYPWR_PLL_REFCLK	(1 << 3)
+#define S3C2443_PHYPWR_XO_ON		(1 << 2)
+#define S3C2443_PHYPWR_PLL_PWRDN	(1 << 1)
+#define S3C2443_PHYPWR_FSUSPEND		(1 << 0)
+
+#define S3C2443_UCLKCON_DETECT_VBUS	(1 << 31)
+#define S3C2443_UCLKCON_FUNC_CLKEN	(1 << 2)
+#define S3C2443_UCLKCON_TCLKEN		(1 << 0)
+
+#include <asm/div64.h>
+
+static inline unsigned int
+s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+	mdiv &= S3C2443_PLLCON_MDIVMASK;
+	pdiv &= S3C2443_PLLCON_PDIVMASK;
+	sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+	fvco = (uint64_t)baseclk * (2 * (mdiv + 8));
+	do_div(fvco, pdiv << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+static inline unsigned int
+s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+	mdiv &= S3C2443_PLLCON_MDIVMASK;
+	pdiv &= S3C2443_PLLCON_PDIVMASK;
+	sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+	fvco = (uint64_t)baseclk * (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+#endif /*  __ASM_ARM_REGS_S3C2443_CLOCK */
+
diff --git a/arch/arm/mach-s3c24xx/include/mach/rtc-core.h b/arch/arm/mach-s3c24xx/include/mach/rtc-core.h
new file mode 100644
index 000000000..88510333b
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/include/mach/rtc-core.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * Samsung RTC Controller core functions
+ */
+
+#ifndef __RTC_CORE_H
+#define __RTC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+extern struct platform_device s3c_device_rtc;
+
+/* re-define device name depending on support. */
+static inline void s3c_rtc_setname(char *name)
+{
+	s3c_device_rtc.name = name;
+}
+
+#endif /* __RTC_CORE_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h
new file mode 100644
index 000000000..4ff83f956
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H
+#define __ARCH_ARM_MACH_S3C24XX_S3C2412_H __FILE__
+
+#define S3C2412_MEMREG(x)		(S3C24XX_VA_MEMCTRL + (x))
+#define S3C2412_EBIREG(x)		(S3C2412_VA_EBI + (x))
+
+#define S3C2412_SSMCREG(x)		(S3C2412_VA_SSMC + (x))
+#define S3C2412_SSMC(x, o)		(S3C2412_SSMCREG((x * 0x20) + (o)))
+
+#define S3C2412_REFRESH			S3C2412_MEMREG(0x10)
+
+#define S3C2412_EBI_BANKCFG		S3C2412_EBIREG(0x4)
+
+#define S3C2412_SSMC_BANK(x)		S3C2412_SSMC(x, 0x0)
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_H */