Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 218 insertions, 0 deletions

diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
new file mode 100644
index 000000000..4001b73af
--- /dev/null
+++ b/arch/arm/mm/proc-fa526.S
@@ -0,0 +1,218 @@
+/*
+ *  linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526
+ *
+ *  Written by : Luke Lee
+ *  Copyright (C) 2005 Faraday Corp.
+ *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the fa526.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/hwcap.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+
+#include "proc-macros.S"
+
+#define CACHE_DLINESIZE	16
+
+	.text
+/*
+ * cpu_fa526_proc_init()
+ */
+ENTRY(cpu_fa526_proc_init)
+	ret	lr
+
+/*
+ * cpu_fa526_proc_fin()
+ */
+ENTRY(cpu_fa526_proc_fin)
+	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
+	bic	r0, r0, #0x1000			@ ...i............
+	bic	r0, r0, #0x000e			@ ............wca.
+	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
+	nop
+	nop
+	ret	lr
+
+/*
+ * cpu_fa526_reset(loc)
+ *
+ * Perform a soft reset of the system.  Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+	.align	4
+	.pushsection	.idmap.text, "ax"
+ENTRY(cpu_fa526_reset)
+/* TODO: Use CP8 if possible... */
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+#ifdef CONFIG_MMU
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+#endif
+	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
+	bic	ip, ip, #0x000f			@ ............wcam
+	bic	ip, ip, #0x1100			@ ...i...s........
+	bic	ip, ip, #0x0800			@ BTB off
+	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
+	nop
+	nop
+	ret	r0
+ENDPROC(cpu_fa526_reset)
+	.popsection
+
+/*
+ * cpu_fa526_do_idle()
+ */
+	.align	4
+ENTRY(cpu_fa526_do_idle)
+	ret	lr
+
+
+ENTRY(cpu_fa526_dcache_clean_area)
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	subs	r1, r1, #CACHE_DLINESIZE
+	bhi	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+	ret	lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_fa526_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+	.align	4
+ENTRY(cpu_fa526_switch_mm)
+#ifdef CONFIG_MMU
+	mov	ip, #0
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
+#else
+	mcr	p15, 0, ip, c7, c14, 0		@ clean and invalidate whole D cache
+#endif
+	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, ip, c7, c5, 6		@ invalidate BTB since mm changed
+	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
+	mcr	p15, 0, ip, c7, c5, 4		@ prefetch flush
+	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate UTLB
+#endif
+	ret	lr
+
+/*
+ * cpu_fa526_set_pte_ext(ptep, pte, ext)
+ *
+ * Set a PTE and flush it out
+ */
+	.align	4
+ENTRY(cpu_fa526_set_pte_ext)
+#ifdef CONFIG_MMU
+	armv3_set_pte_ext
+	mov	r0, r0
+	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
+#endif
+	ret	lr
+
+	.type	__fa526_setup, #function
+__fa526_setup:
+	/* On return of this routine, r0 must carry correct flags for CFG register */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
+#ifdef CONFIG_MMU
+	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
+#endif
+	mcr	p15, 0, r0, c7, c5, 5		@ invalidate IScratchpad RAM
+
+	mov	r0, #1
+	mcr	p15, 0, r0, c1, c1, 0		@ turn-on ECR
+
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB All
+	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
+	mcr	p15, 0, r0, c7, c5, 4		@ prefetch flush
+
+	mov	r0, #0x1f			@ Domains 0, 1 = manager, 2 = client
+	mcr	p15, 0, r0, c3, c0		@ load domain access register
+
+	mrc	p15, 0, r0, c1, c0		@ get control register v4
+	ldr	r5, fa526_cr1_clear
+	bic	r0, r0, r5
+	ldr	r5, fa526_cr1_set
+	orr	r0, r0, r5
+	ret	lr
+	.size	__fa526_setup, . - __fa526_setup
+
+	/*
+	 * .RVI ZFRS BLDP WCAM
+	 * ..11 1001 .111 1101
+	 *
+	 */
+	.type	fa526_cr1_clear, #object
+	.type	fa526_cr1_set, #object
+fa526_cr1_clear:
+	.word	0x3f3f
+fa526_cr1_set:
+	.word	0x397D
+
+	__INITDATA
+
+	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+	define_processor_functions fa526, dabort=v4_early_abort, pabort=legacy_pabort
+
+	.section ".rodata"
+
+	string	cpu_arch_name, "armv4"
+	string	cpu_elf_name, "v4"
+	string	cpu_fa526_name, "FA526"
+
+	.align
+
+	.section ".proc.info.init", #alloc
+
+	.type	__fa526_proc_info,#object
+__fa526_proc_info:
+	.long	0x66015261
+	.long	0xff01fff1
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	initfn	__fa526_setup, __fa526_proc_info
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP | HWCAP_HALF
+	.long	cpu_fa526_name
+	.long	fa526_processor_functions
+	.long	fa_tlb_fns
+	.long	fa_user_fns
+	.long	fa_cache_fns
+	.size	__fa526_proc_info, . - __fa526_proc_info