Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

37 files changed, 5981 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
new file mode 100644
index 000000000..86e18adb6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
new file mode 100644
index 000000000..f90c040fd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS1012A Freedom Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ */
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A Freedom Board";
+	compatible = "fsl,ls1012a-frdm", "fsl,ls1012a";
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+			system-clock-frequency = <25000000>;
+		};
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	codec: sgtl5000@a {
+		#sound-dai-cells = <0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_1p8v>;
+		clocks = <&sys_mclk>;
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
new file mode 100644
index 000000000..2fb1cb1f7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS1012A QDS Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ */
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A QDS Board";
+	compatible = "fsl,ls1012a-qds", "fsl,ls1012a";
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+			system-clock-frequency = <24576000>;
+		};
+	};
+};
+
+&dspi {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst25wf040b", "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "en25s64", "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&esdhc0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9547@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			codec: sgtl5000@a {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,sgtl5000";
+				reg = <0xa>;
+				VDDA-supply = <&reg_3p3v>;
+				VDDIO-supply = <&reg_3p3v>;
+				clocks = <&sys_mclk>;
+			};
+		};
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
new file mode 100644
index 000000000..5edb1e137
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS1012A RDB Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ */
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A RDB Board";
+	compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
new file mode 100644
index 000000000..712264e4e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -0,0 +1,509 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-1012A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "fsl,ls1012a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		crypto = &crypto;
+		rtic-a = &rtic_a;
+		rtic-b = &rtic_b;
+		rtic-c = &rtic_c;
+		rtic-d = &rtic_d;
+		sec-mon = &sec_mon;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clocks = <&clockgen 1 0>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_PH20>;
+		};
+	};
+
+	idle-states {
+		/*
+		 * PSCI node is not added default, U-boot will add missing
+		 * parts if it determines to use PSCI.
+		 */
+		entry-method = "psci";
+
+		CPU_PH20: cpu-ph20 {
+			compatible = "arm,idle-state";
+			idle-state-name = "PH20";
+			arm,psci-suspend-param = <0x0>;
+			entry-latency-us = <1000>;
+			exit-latency-us = <1000>;
+			min-residency-us = <3000>;
+		};
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "sysclk";
+	};
+
+	coreclk: coreclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "coreclk";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
+			     <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
+			     <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
+			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gic: interrupt-controller@1400000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
+		      <0x0 0x1402000 0 0x2000>, /* GICC */
+		      <0x0 0x1404000 0 0x2000>, /* GICH */
+		      <0x0 0x1406000 0 0x2000>; /* GICV */
+		interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&dcfg>;
+		offset = <0xb0>;
+		mask = <0x02>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		esdhc0: esdhc@1560000 {
+			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <0 62 0x4>;
+			clocks = <&clockgen 4 0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		scfg: scfg@1570000 {
+			compatible = "fsl,ls1012a-scfg", "syscon";
+			reg = <0x0 0x1570000 0x0 0x10000>;
+			big-endian;
+		};
+
+		esdhc1: esdhc@1580000 {
+			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1580000 0x0 0x10000>;
+			interrupts = <0 65 0x4>;
+			clocks = <&clockgen 4 0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			broken-cd;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		crypto: crypto@1700000 {
+			compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
+				     "fsl,sec-v4.0";
+			fsl,sec-era = <8>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x1700000 0x100000>;
+			reg = <0x00 0x1700000 0x0 0x100000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			rtic@60000 {
+				compatible = "fsl,sec-v5.4-rtic",
+					     "fsl,sec-v5.0-rtic",
+					     "fsl,sec-v4.0-rtic";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x60000 0x100 0x60e00 0x18>;
+				ranges = <0x0 0x60100 0x500>;
+
+				rtic_a: rtic-a@0 {
+					compatible = "fsl,sec-v5.4-rtic-memory",
+						     "fsl,sec-v5.0-rtic-memory",
+						     "fsl,sec-v4.0-rtic-memory";
+					reg = <0x00 0x20 0x100 0x100>;
+				};
+
+				rtic_b: rtic-b@20 {
+					compatible = "fsl,sec-v5.4-rtic-memory",
+						     "fsl,sec-v5.0-rtic-memory",
+						     "fsl,sec-v4.0-rtic-memory";
+					reg = <0x20 0x20 0x200 0x100>;
+				};
+
+				rtic_c: rtic-c@40 {
+					compatible = "fsl,sec-v5.4-rtic-memory",
+						     "fsl,sec-v5.0-rtic-memory",
+						     "fsl,sec-v4.0-rtic-memory";
+					reg = <0x40 0x20 0x300 0x100>;
+				};
+
+				rtic_d: rtic-d@60 {
+					compatible = "fsl,sec-v5.4-rtic-memory",
+						     "fsl,sec-v5.0-rtic-memory",
+						     "fsl,sec-v4.0-rtic-memory";
+					reg = <0x60 0x20 0x400 0x100>;
+				};
+			};
+		};
+
+		sec_mon: sec_mon@1e90000 {
+			compatible = "fsl,sec-v5.4-mon", "fsl,sec-v5.0-mon",
+				     "fsl,sec-v4.0-mon";
+			reg = <0x0 0x1e90000 0x0 0x10000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dcfg: dcfg@1ee0000 {
+			compatible = "fsl,ls1012a-dcfg",
+				     "syscon";
+			reg = <0x0 0x1ee0000 0x0 0x10000>;
+			big-endian;
+		};
+
+		clockgen: clocking@1ee1000 {
+			compatible = "fsl,ls1012a-clockgen";
+			reg = <0x0 0x1ee1000 0x0 0x1000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk &coreclk>;
+			clock-names = "sysclk", "coreclk";
+		};
+
+		tmu: tmu@1f00000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f00000 0x0 0x10000>;
+			interrupts = <0 33 0x4>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+			fsl,tmu-calibration = <0x00000000 0x00000026
+					       0x00000001 0x0000002d
+					       0x00000002 0x00000032
+					       0x00000003 0x00000039
+					       0x00000004 0x0000003f
+					       0x00000005 0x00000046
+					       0x00000006 0x0000004d
+					       0x00000007 0x00000054
+					       0x00000008 0x0000005a
+					       0x00000009 0x00000061
+					       0x0000000a 0x0000006a
+					       0x0000000b 0x00000071
+
+					       0x00010000 0x00000025
+					       0x00010001 0x0000002c
+					       0x00010002 0x00000035
+					       0x00010003 0x0000003d
+					       0x00010004 0x00000045
+					       0x00010005 0x0000004e
+					       0x00010006 0x00000057
+					       0x00010007 0x00000061
+					       0x00010008 0x0000006b
+					       0x00010009 0x00000076
+
+					       0x00020000 0x00000029
+					       0x00020001 0x00000033
+					       0x00020002 0x0000003d
+					       0x00020003 0x00000049
+					       0x00020004 0x00000056
+					       0x00020005 0x00000061
+					       0x00020006 0x0000006d
+
+					       0x00030000 0x00000021
+					       0x00030001 0x0000002a
+					       0x00030002 0x0000003c
+					       0x00030003 0x0000004e>;
+			big-endian;
+			#thermal-sensor-cells = <1>;
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		dspi: spi@2100000 {
+			compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 0>;
+			spi-num-chipselects = <5>;
+			big-endian;
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0500 0x0 0x100>;
+			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0600 0x0 0x100>;
+			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wdog0: wdog@2ad0000 {
+			compatible = "fsl,ls1012a-wdt",
+				     "fsl,imx21-wdt";
+			reg = <0x0 0x2ad0000 0x0 0x10000>;
+			interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 0>;
+			big-endian;
+		};
+
+		sai1: sai@2b50000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0x2b50000 0x0 0x10000>;
+			interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>,
+				 <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 47>,
+			       <&edma0 1 46>;
+			status = "disabled";
+		};
+
+		sai2: sai@2b60000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0x2b60000 0x0 0x10000>;
+			interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>,
+				 <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 45>,
+			       <&edma0 1 44>;
+			status = "disabled";
+		};
+
+		edma0: edma@2c00000 {
+			#dma-cells = <2>;
+			compatible = "fsl,vf610-edma";
+			reg = <0x0 0x2c00000 0x0 0x10000>,
+			      <0x0 0x2c10000 0x0 0x10000>,
+			      <0x0 0x2c20000 0x0 0x10000>;
+			interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 103 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma-tx", "edma-err";
+			dma-channels = <32>;
+			big-endian;
+			clock-names = "dmamux0", "dmamux1";
+			clocks = <&clockgen 4 3>,
+				 <&clockgen 4 3>;
+		};
+
+		usb0: usb3@2f00000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x2f00000 0x0 0x10000>;
+			interrupts = <0 60 0x4>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>,
+				<0x0 0x20140520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 0>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		usb1: usb2@8600000 {
+			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+			reg = <0x0 0x8600000 0x0 0x1000>;
+			interrupts = <0 139 0x4>;
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+
+		msi: msi-controller1@1572000 {
+			compatible = "fsl,ls1012a-msi";
+			reg = <0x0 0x1572000 0x0 0x8>;
+			msi-controller;
+			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie@3400000 {
+			compatible = "fsl,ls1012a-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 118 0x4>, /* controller interrupt */
+				     <0 117 0x4>; /* PME interrupt */
+			interrupt-names = "aer", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
new file mode 100644
index 000000000..d237162a8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 device tree nodes for ls1043
+ *
+ * Copyright 2015-2016 Freescale Semiconductor Inc.
+ */
+
+&soc {
+
+/* include used FMan blocks */
+#include "qoriq-fman3-0.dtsi"
+#include "qoriq-fman3-0-1g-0.dtsi"
+#include "qoriq-fman3-0-1g-1.dtsi"
+#include "qoriq-fman3-0-1g-2.dtsi"
+#include "qoriq-fman3-0-1g-3.dtsi"
+#include "qoriq-fman3-0-1g-4.dtsi"
+#include "qoriq-fman3-0-1g-5.dtsi"
+#include "qoriq-fman3-0-10g-0.dtsi"
+
+};
+
+&fman0 {
+	fsl,erratum-a050385;
+
+	/* these aliases provide the FMan ports mapping */
+	enet0: ethernet@e0000 {
+	};
+
+	enet1: ethernet@e2000 {
+	};
+
+	enet2: ethernet@e4000 {
+	};
+
+	enet3: ethernet@e6000 {
+	};
+
+	enet4: ethernet@e8000 {
+	};
+
+	enet5: ethernet@ea000 {
+	};
+
+	enet6: ethernet@f0000 {
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
new file mode 100644
index 000000000..c7b8d2c00
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ */
+
+/dts-v1/;
+#include "fsl-ls1043a.dtsi"
+
+/ {
+	model = "LS1043A QDS Board";
+	compatible = "fsl,ls1043a-qds", "fsl,ls1043a";
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x1 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@1,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x1 0x0 0x10000>;
+	};
+
+	fpga: board-control@2,0 {
+		compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
+		reg = <0x2 0x0 0x0000100>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9547@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				/* IRQ10_B */
+				interrupts = <0 150 0x4>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			eeprom@56 {
+				compatible = "atmel,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c512";
+				reg = <0x57>;
+			};
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461a";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&qspi {
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: s25fl128s@0 {
+		compatible = "spansion,m25p80";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+#include "fsl-ls1043-post.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
new file mode 100644
index 000000000..2dcec0a75
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ */
+
+/dts-v1/;
+#include "fsl-ls1043a.dtsi"
+
+/ {
+	model = "LS1043A RDB Board";
+
+	aliases {
+		crypto = &crypto;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	ina220@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+	adt7461a@4c {
+		compatible = "adi,adt7461";
+		reg = <0x4c>;
+	};
+	eeprom@52 {
+		compatible = "atmel,24c512";
+		reg = <0x52>;
+	};
+	eeprom@53 {
+		compatible = "atmel,24c512";
+		reg = <0x53>;
+	};
+	rtc@68 {
+		compatible = "pericom,pt7c4338";
+		reg = <0x68>;
+	};
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x1 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
+
+		nor@0,0 {
+			compatible = "cfi-flash";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			compatible = "fsl,ifc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x1 0x0 0x10000>;
+		};
+
+		cpld: board-control@2,0 {
+			compatible = "fsl,ls1043ardb-cpld";
+			reg = <0x2 0x0 0x0000100>;
+		};
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";  /* 16MB */
+		reg = <0>;
+		spi-max-frequency = <1000000>; /* input clock */
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+#include "fsl-ls1043-post.dtsi"
+
+&fman0 {
+	ethernet@e0000 {
+		phy-handle = <&qsgmii_phy1>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@e2000 {
+		phy-handle = <&qsgmii_phy2>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@e4000 {
+		phy-handle = <&rgmii_phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	ethernet@e6000 {
+		phy-handle = <&rgmii_phy2>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&qsgmii_phy3>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&qsgmii_phy4>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@f0000 { /* 10GEC1 */
+		phy-handle = <&aqr105_phy>;
+		phy-connection-type = "xgmii";
+	};
+
+	mdio@fc000 {
+		rgmii_phy1: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+
+		rgmii_phy2: ethernet-phy@2 {
+			reg = <0x2>;
+		};
+
+		qsgmii_phy1: ethernet-phy@4 {
+			reg = <0x4>;
+		};
+
+		qsgmii_phy2: ethernet-phy@5 {
+			reg = <0x5>;
+		};
+
+		qsgmii_phy3: ethernet-phy@6 {
+			reg = <0x6>;
+		};
+
+		qsgmii_phy4: ethernet-phy@7 {
+			reg = <0x7>;
+		};
+	};
+
+	mdio@fd000 {
+		aqr105_phy: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			interrupts = <0 132 4>;
+			reg = <0x1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
new file mode 100644
index 000000000..3ec60e33f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -0,0 +1,750 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "fsl,ls1043a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * We expect the enable-method for cpu's to be "psci", but this
+		 * is dependent on the SoC FW, which will fill this in.
+		 *
+		 * Currently supported enable-method is psci v0.2
+		 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+		};
+	};
+
+	idle-states {
+		/*
+		 * PSCI node is not added default, U-boot will add missing
+		 * parts if it determines to use PSCI.
+		 */
+		entry-method = "psci";
+
+		CPU_PH20: cpu-ph20 {
+			compatible = "arm,idle-state";
+			idle-state-name = "PH20";
+			arm,psci-suspend-param = <0x0>;
+			entry-latency-us = <1000>;
+			exit-latency-us = <1000>;
+			min-residency-us = <3000>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>;
+		      /* DRAM space 1, size: 2GiB DRAM */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			compatible = "shared-dma-pool";
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+			no-map;
+		};
+
+		qman_fqd: qman-fqd {
+			compatible = "shared-dma-pool";
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+			no-map;
+		};
+
+		qman_pfdr: qman-pfdr {
+			compatible = "shared-dma-pool";
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+			no-map;
+		};
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	reboot {
+		compatible ="syscon-reboot";
+		regmap = <&dcfg>;
+		offset = <0xb0>;
+		mask = <0x02>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu 3>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xf08>, /* Physical Secure PPI */
+			     <1 14 0xf08>, /* Physical Non-Secure PPI */
+			     <1 11 0xf08>, /* Virtual PPI */
+			     <1 10 0xf08>; /* Hypervisor PPI */
+		fsl,erratum-a008585;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 106 0x4>,
+			     <0 107 0x4>,
+			     <0 95 0x4>,
+			     <0 97 0x4>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	gic: interrupt-controller@1400000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
+		      <0x0 0x1402000 0 0x2000>, /* GICC */
+		      <0x0 0x1404000 0 0x2000>, /* GICH */
+		      <0x0 0x1406000 0 0x2000>; /* GICV */
+		interrupts = <1 9 0xf08>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clockgen: clocking@1ee1000 {
+			compatible = "fsl,ls1043a-clockgen";
+			reg = <0x0 0x1ee1000 0x0 0x1000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		scfg: scfg@1570000 {
+			compatible = "fsl,ls1043a-scfg", "syscon";
+			reg = <0x0 0x1570000 0x0 0x10000>;
+			big-endian;
+		};
+
+		crypto: crypto@1700000 {
+			compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
+				     "fsl,sec-v4.0";
+			fsl,sec-era = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x1700000 0x100000>;
+			reg = <0x00 0x1700000 0x0 0x100000>;
+			interrupts = <0 75 0x4>;
+			dma-coherent;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x10000 0x10000>;
+				interrupts = <0 71 0x4>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x20000 0x10000>;
+				interrupts = <0 72 0x4>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x30000 0x10000>;
+				interrupts = <0 73 0x4>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x40000 0x10000>;
+				interrupts = <0 74 0x4>;
+			};
+		};
+
+		dcfg: dcfg@1ee0000 {
+			compatible = "fsl,ls1043a-dcfg", "syscon";
+			reg = <0x0 0x1ee0000 0x0 0x10000>;
+			big-endian;
+		};
+
+		ifc: ifc@1530000 {
+			compatible = "fsl,ifc", "simple-bus";
+			reg = <0x0 0x1530000 0x0 0x10000>;
+			big-endian;
+			interrupts = <0 43 0x4>;
+		};
+
+		qspi: spi@1550000 {
+			compatible = "fsl,ls1043a-qspi", "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+				<0x0 0x40000000 0x0 0x4000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <0 99 0x4>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen 4 0>, <&clockgen 4 0>;
+			big-endian;
+			status = "disabled";
+		};
+
+		esdhc: esdhc@1560000 {
+			compatible = "fsl,ls1043a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <0 62 0x4>;
+			clock-frequency = <0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			bus-width = <4>;
+		};
+
+		ddr: memory-controller@1080000 {
+			compatible = "fsl,qoriq-memory-controller";
+			reg = <0x0 0x1080000 0x0 0x1000>;
+			interrupts = <0 144 0x4>;
+			big-endian;
+		};
+
+		tmu: tmu@1f00000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f00000 0x0 0x10000>;
+			interrupts = <0 33 0x4>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+			fsl,tmu-calibration = <0x00000000 0x00000026
+					       0x00000001 0x0000002d
+					       0x00000002 0x00000032
+					       0x00000003 0x00000039
+					       0x00000004 0x0000003f
+					       0x00000005 0x00000046
+					       0x00000006 0x0000004d
+					       0x00000007 0x00000054
+					       0x00000008 0x0000005a
+					       0x00000009 0x00000061
+					       0x0000000a 0x0000006a
+					       0x0000000b 0x00000071
+
+					       0x00010000 0x00000025
+					       0x00010001 0x0000002c
+					       0x00010002 0x00000035
+					       0x00010003 0x0000003d
+					       0x00010004 0x00000045
+					       0x00010005 0x0000004e
+					       0x00010006 0x00000057
+					       0x00010007 0x00000061
+					       0x00010008 0x0000006b
+					       0x00010009 0x00000076
+
+					       0x00020000 0x00000029
+					       0x00020001 0x00000033
+					       0x00020002 0x0000003d
+					       0x00020003 0x00000049
+					       0x00020004 0x00000056
+					       0x00020005 0x00000061
+					       0x00020006 0x0000006d
+
+					       0x00030000 0x00000021
+					       0x00030001 0x0000002a
+					       0x00030002 0x0000003c
+					       0x00030003 0x0000004e>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		qman: qman@1880000 {
+			compatible = "fsl,qman";
+			reg = <0x0 0x1880000 0x0 0x10000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&qman_fqd &qman_pfdr>;
+		};
+
+		bman: bman@1890000 {
+			compatible = "fsl,bman";
+			reg = <0x0 0x1890000 0x0 0x10000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&bman_fbpr>;
+		};
+
+		bportals: bman-portals@508000000 {
+			ranges = <0x0 0x5 0x08000000 0x8000000>;
+		};
+
+		qportals: qman-portals@500000000 {
+			ranges = <0x0 0x5 0x00000000 0x8000000>;
+		};
+
+		dspi0: spi@2100000 {
+			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <0 64 0x4>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 0>;
+			spi-num-chipselects = <5>;
+			big-endian;
+			status = "disabled";
+		};
+
+		dspi1: spi@2110000 {
+			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <0 65 0x4>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 0>;
+			spi-num-chipselects = <5>;
+			big-endian;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <0 56 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			dmas = <&edma0 1 39>,
+			       <&edma0 1 38>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <0 57 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@21a0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21a0000 0x0 0x10000>;
+			interrupts = <0 58 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@21b0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21b0000 0x0 0x10000>;
+			interrupts = <0 59 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0500 0x0 0x100>;
+			interrupts = <0 54 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0600 0x0 0x100>;
+			interrupts = <0 54 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		duart2: serial@21d0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0500 0x0 0x100>;
+			interrupts = <0 55 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		duart3: serial@21d0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0600 0x0 0x100>;
+			interrupts = <0 55 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		gpio1: gpio@2300000 {
+			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <0 66 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2310000 {
+			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <0 67 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2320000 {
+			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <0 68 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@2330000 {
+			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <0 134 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		lpuart0: serial@2950000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2950000 0x0 0x1000>;
+			interrupts = <0 48 0x4>;
+			clocks = <&clockgen 0 0>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart1: serial@2960000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2960000 0x0 0x1000>;
+			interrupts = <0 49 0x4>;
+			clocks = <&clockgen 4 0>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart2: serial@2970000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2970000 0x0 0x1000>;
+			interrupts = <0 50 0x4>;
+			clocks = <&clockgen 4 0>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart3: serial@2980000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2980000 0x0 0x1000>;
+			interrupts = <0 51 0x4>;
+			clocks = <&clockgen 4 0>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart4: serial@2990000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2990000 0x0 0x1000>;
+			interrupts = <0 52 0x4>;
+			clocks = <&clockgen 4 0>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart5: serial@29a0000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x29a0000 0x0 0x1000>;
+			interrupts = <0 53 0x4>;
+			clocks = <&clockgen 4 0>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		wdog0: wdog@2ad0000 {
+			compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
+			reg = <0x0 0x2ad0000 0x0 0x10000>;
+			interrupts = <0 83 0x4>;
+			clocks = <&clockgen 4 0>;
+			clock-names = "wdog";
+			big-endian;
+		};
+
+		edma0: edma@2c00000 {
+			#dma-cells = <2>;
+			compatible = "fsl,vf610-edma";
+			reg = <0x0 0x2c00000 0x0 0x10000>,
+			      <0x0 0x2c10000 0x0 0x10000>,
+			      <0x0 0x2c20000 0x0 0x10000>;
+			interrupts = <0 103 0x4>,
+				     <0 103 0x4>;
+			interrupt-names = "edma-tx", "edma-err";
+			dma-channels = <32>;
+			big-endian;
+			clock-names = "dmamux0", "dmamux1";
+			clocks = <&clockgen 4 0>,
+				 <&clockgen 4 0>;
+		};
+
+		usb0: usb3@2f00000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x2f00000 0x0 0x10000>;
+			interrupts = <0 60 0x4>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+		};
+
+		usb1: usb3@3000000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3000000 0x0 0x10000>;
+			interrupts = <0 61 0x4>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+		};
+
+		usb2: usb3@3100000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <0 63 0x4>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1043a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>,
+				<0x0 0x20140520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <0 69 0x4>;
+			clocks = <&clockgen 4 0>;
+			dma-coherent;
+		};
+
+		msi1: msi-controller1@1571000 {
+			compatible = "fsl,ls1043a-msi";
+			reg = <0x0 0x1571000 0x0 0x8>;
+			msi-controller;
+			interrupts = <0 116 0x4>;
+		};
+
+		msi2: msi-controller2@1572000 {
+			compatible = "fsl,ls1043a-msi";
+			reg = <0x0 0x1572000 0x0 0x8>;
+			msi-controller;
+			interrupts = <0 126 0x4>;
+		};
+
+		msi3: msi-controller3@1573000 {
+			compatible = "fsl,ls1043a-msi";
+			reg = <0x0 0x1573000 0x0 0x8>;
+			msi-controller;
+			interrupts = <0 160 0x4>;
+		};
+
+		pcie@3400000 {
+			compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 118 0x4>, /* controller interrupt */
+				     <0 117 0x4>; /* PME interrupt */
+			interrupt-names = "intr", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-lanes = <4>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi1>, <&msi2>, <&msi3>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 110 0x4>,
+					<0000 0 0 2 &gic 0 111 0x4>,
+					<0000 0 0 3 &gic 0 112 0x4>,
+					<0000 0 0 4 &gic 0 113 0x4>;
+		};
+
+		pcie@3500000 {
+			compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 128 0x4>,
+				     <0 127 0x4>;
+			interrupt-names = "intr", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-lanes = <2>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi1>, <&msi2>, <&msi3>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 120  0x4>,
+					<0000 0 0 2 &gic 0 121 0x4>,
+					<0000 0 0 3 &gic 0 122 0x4>,
+					<0000 0 0 4 &gic 0 123 0x4>;
+		};
+
+		pcie@3600000 {
+			compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
+			       0x50 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 162 0x4>,
+				     <0 161 0x4>;
+			interrupt-names = "intr", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-lanes = <2>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi1>, <&msi2>, <&msi3>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 154 0x4>,
+					<0000 0 0 2 &gic 0 155 0x4>,
+					<0000 0 0 3 &gic 0 156 0x4>,
+					<0000 0 0 4 &gic 0 157 0x4>;
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+};
+
+#include "qoriq-qman-portals.dtsi"
+#include "qoriq-bman-portals.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
new file mode 100644
index 000000000..d6caaea57
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 device tree nodes for ls1046
+ *
+ * Copyright 2015-2016 Freescale Semiconductor Inc.
+ *
+ */
+
+&soc {
+
+/* include used FMan blocks */
+#include "qoriq-fman3-0.dtsi"
+#include "qoriq-fman3-0-1g-0.dtsi"
+#include "qoriq-fman3-0-1g-1.dtsi"
+#include "qoriq-fman3-0-1g-2.dtsi"
+#include "qoriq-fman3-0-1g-3.dtsi"
+#include "qoriq-fman3-0-1g-4.dtsi"
+#include "qoriq-fman3-0-1g-5.dtsi"
+#include "qoriq-fman3-0-10g-0.dtsi"
+#include "qoriq-fman3-0-10g-1.dtsi"
+};
+
+&fman0 {
+	/* these aliases provide the FMan ports mapping */
+	enet0: ethernet@e0000 {
+	};
+
+	enet1: ethernet@e2000 {
+	};
+
+	enet2: ethernet@e4000 {
+	};
+
+	enet3: ethernet@e6000 {
+	};
+
+	enet4: ethernet@e8000 {
+	};
+
+	enet5: ethernet@ea000 {
+	};
+
+	enet6: ethernet@f0000 {
+	};
+
+	enet7: ethernet@f2000 {
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
new file mode 100644
index 000000000..e69306e6b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * Shaohui Xie <Shaohui.Xie@nxp.com>
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1046a.dtsi"
+
+/ {
+	model = "LS1046A QDS Board";
+	compatible = "fsl,ls1046a-qds", "fsl,ls1046a";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&dspi {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst25wf040b", "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "en25s64", "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9547@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+				/* IRQ10_B */
+				interrupts = <0 150 0x4>;
+			};
+
+			eeprom@56 {
+				compatible = "atmel,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c512";
+				reg = <0x57>;
+			};
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461a";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x1 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@1,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x1 0x0 0x10000>;
+	};
+
+	fpga: board-control@2,0 {
+		compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis";
+		reg = <0x2 0x0 0x0000100>;
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&qspi {
+	num-cs = <2>;
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: s25fl128s@0 {
+		compatible = "spansion,m25p80";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+#include "fsl-ls1046-post.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
new file mode 100644
index 000000000..d4f37b9ae
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * Mingkai Hu <mingkai.hu@nxp.com>
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1046a.dtsi"
+
+/ {
+	model = "LS1046A RDB Board";
+	compatible = "fsl,ls1046a-rdb", "fsl,ls1046a";
+
+	aliases {
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&esdhc {
+	mmc-hs200-1_8v;
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+};
+
+&i2c0 {
+	status = "okay";
+
+	ina220@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	temp-sensor@4c {
+		compatible = "adi,adt7461";
+		reg = <0x4c>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c512";
+		reg = <0x52>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c512";
+		reg = <0x53>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NAND Flashe and CPLD on board */
+	ranges = <0x0 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "fsl,ifc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x0 0x10000>;
+	};
+
+	cpld: board-control@2,0 {
+		compatible = "fsl,ls1046ardb-cpld";
+		reg = <0x2 0x0 0x0000100>;
+	};
+};
+
+&qspi {
+	num-cs = <2>;
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: s25fs512s@0 {
+		compatible = "spansion,m25p80";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+
+	qflash1: s25fs512s@1 {
+		compatible = "spansion,m25p80";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <1>;
+	};
+};
+
+#include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+	ethernet@e4000 {
+		phy-handle = <&rgmii_phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	ethernet@e6000 {
+		phy-handle = <&rgmii_phy2>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&sgmii_phy1>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&sgmii_phy2>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@f0000 { /* 10GEC1 */
+		phy-handle = <&aqr106_phy>;
+		phy-connection-type = "xgmii";
+	};
+
+	ethernet@f2000 { /* 10GEC2 */
+		fixed-link = <0 1 1000 0 0>;
+		phy-connection-type = "xgmii";
+	};
+
+	mdio@fc000 {
+		rgmii_phy1: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+
+		rgmii_phy2: ethernet-phy@2 {
+			reg = <0x2>;
+		};
+
+		sgmii_phy1: ethernet-phy@3 {
+			reg = <0x3>;
+		};
+
+		sgmii_phy2: ethernet-phy@4 {
+			reg = <0x4>;
+		};
+	};
+
+	mdio@fd000 {
+		aqr106_phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			interrupts = <0 131 4>;
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
new file mode 100644
index 000000000..3452971a8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -0,0 +1,746 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * Mingkai Hu <mingkai.hu@nxp.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "fsl,ls1046a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		crypto = &crypto;
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x1>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x2>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x3>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+		};
+	};
+
+	idle-states {
+		/*
+		 * PSCI node is not added default, U-boot will add missing
+		 * parts if it determines to use PSCI.
+		 */
+		entry-method = "psci";
+
+		CPU_PH20: cpu-ph20 {
+			compatible = "arm,idle-state";
+			idle-state-name = "PH20";
+			arm,psci-suspend-param = <0x0>;
+			entry-latency-us = <1000>;
+			exit-latency-us = <1000>;
+			min-residency-us = <3000>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* Real size will be filled by bootloader */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	reboot {
+		compatible ="syscon-reboot";
+		regmap = <&dcfg>;
+		offset = <0xb0>;
+		mask = <0x02>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 3>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xf) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xf) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xf) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xf) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	gic: interrupt-controller@1400000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x1410000 0 0x10000>, /* GICD */
+		      <0x0 0x1420000 0 0x20000>, /* GICC */
+		      <0x0 0x1440000 0 0x20000>, /* GICH */
+		      <0x0 0x1460000 0 0x20000>; /* GICV */
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
+					 IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ddr: memory-controller@1080000 {
+			compatible = "fsl,qoriq-memory-controller";
+			reg = <0x0 0x1080000 0x0 0x1000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
+
+		ifc: ifc@1530000 {
+			compatible = "fsl,ifc", "simple-bus";
+			reg = <0x0 0x1530000 0x0 0x10000>;
+			big-endian;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		qspi: spi@1550000 {
+			compatible = "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+				<0x0 0x40000000 0x0 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			fsl,qspi-has-second-chip;
+			status = "disabled";
+		};
+
+		esdhc: esdhc@1560000 {
+			compatible = "fsl,ls1046a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 2 1>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			bus-width = <4>;
+		};
+
+		scfg: scfg@1570000 {
+			compatible = "fsl,ls1046a-scfg", "syscon";
+			reg = <0x0 0x1570000 0x0 0x10000>;
+			big-endian;
+		};
+
+		crypto: crypto@1700000 {
+			compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
+				     "fsl,sec-v4.0";
+			fsl,sec-era = <8>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x1700000 0x100000>;
+			reg = <0x00 0x1700000 0x0 0x100000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		qman: qman@1880000 {
+			compatible = "fsl,qman";
+			reg = <0x0 0x1880000 0x0 0x10000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&qman_fqd &qman_pfdr>;
+
+		};
+
+		bman: bman@1890000 {
+			compatible = "fsl,bman";
+			reg = <0x0 0x1890000 0x0 0x10000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&bman_fbpr>;
+
+		};
+
+		qportals: qman-portals@500000000 {
+			ranges = <0x0 0x5 0x00000000 0x8000000>;
+		};
+
+		bportals: bman-portals@508000000 {
+			ranges = <0x0 0x5 0x08000000 0x8000000>;
+		};
+
+		dcfg: dcfg@1ee0000 {
+			compatible = "fsl,ls1046a-dcfg", "syscon";
+			reg = <0x0 0x1ee0000 0x0 0x1000>;
+			big-endian;
+		};
+
+		clockgen: clocking@1ee1000 {
+			compatible = "fsl,ls1046a-clockgen";
+			reg = <0x0 0x1ee1000 0x0 0x1000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		tmu: tmu@1f00000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f00000 0x0 0x10000>;
+			interrupts = <0 33 0x4>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+			fsl,tmu-calibration =
+				/* Calibration data group 1 */
+				<0x00000000 0x00000026
+				0x00000001 0x0000002d
+				0x00000002 0x00000032
+				0x00000003 0x00000039
+				0x00000004 0x0000003f
+				0x00000005 0x00000046
+				0x00000006 0x0000004d
+				0x00000007 0x00000054
+				0x00000008 0x0000005a
+				0x00000009 0x00000061
+				0x0000000a 0x0000006a
+				0x0000000b 0x00000071
+				/* Calibration data group 2 */
+				0x00010000 0x00000025
+				0x00010001 0x0000002c
+				0x00010002 0x00000035
+				0x00010003 0x0000003d
+				0x00010004 0x00000045
+				0x00010005 0x0000004e
+				0x00010006 0x00000057
+				0x00010007 0x00000061
+				0x00010008 0x0000006b
+				0x00010009 0x00000076
+				/* Calibration data group 3 */
+				0x00020000 0x00000029
+				0x00020001 0x00000033
+				0x00020002 0x0000003d
+				0x00020003 0x00000049
+				0x00020004 0x00000056
+				0x00020005 0x00000061
+				0x00020006 0x0000006d
+				/* Calibration data group 4 */
+				0x00030000 0x00000021
+				0x00030001 0x0000002a
+				0x00030002 0x0000003c
+				0x00030003 0x0000004e>;
+			big-endian;
+			#thermal-sensor-cells = <1>;
+		};
+
+		dspi: spi@2100000 {
+			compatible = "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 1>;
+			spi-num-chipselects = <5>;
+			big-endian;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			dmas = <&edma0 1 39>,
+			       <&edma0 1 38>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@21a0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@21b0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21b0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0500 0x0 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0600 0x0 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+		};
+
+		duart2: serial@21d0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0500 0x0 0x100>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+		};
+
+		duart3: serial@21d0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0600 0x0 0x100>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		lpuart0: serial@2950000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2950000 0x0 0x1000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 0>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart1: serial@2960000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2960000 0x0 0x1000>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart2: serial@2970000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2970000 0x0 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart3: serial@2980000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2980000 0x0 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart4: serial@2990000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2990000 0x0 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart5: serial@29a0000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x29a0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		wdog0: watchdog@2ad0000 {
+			compatible = "fsl,imx21-wdt";
+			reg = <0x0 0x2ad0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+			big-endian;
+		};
+
+		edma0: edma@2c00000 {
+			#dma-cells = <2>;
+			compatible = "fsl,vf610-edma";
+			reg = <0x0 0x2c00000 0x0 0x10000>,
+			      <0x0 0x2c10000 0x0 0x10000>,
+			      <0x0 0x2c20000 0x0 0x10000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma-tx", "edma-err";
+			dma-channels = <32>;
+			big-endian;
+			clock-names = "dmamux0", "dmamux1";
+			clocks = <&clockgen 4 1>,
+				 <&clockgen 4 1>;
+		};
+
+		usb0: usb@2f00000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x2f00000 0x0 0x10000>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+		};
+
+		usb1: usb@3000000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3000000 0x0 0x10000>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+		};
+
+		usb2: usb@3100000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1046a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>,
+				<0x0 0x20140520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>;
+		};
+
+		msi1: msi-controller@1580000 {
+			compatible = "fsl,ls1046a-msi";
+			msi-controller;
+			reg = <0x0 0x1580000 0x0 0x10000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		msi2: msi-controller@1590000 {
+			compatible = "fsl,ls1046a-msi";
+			msi-controller;
+			reg = <0x0 0x1590000 0x0 0x10000>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		msi3: msi-controller@15a0000 {
+			compatible = "fsl,ls1046a-msi";
+			msi-controller;
+			reg = <0x0 0x15a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie@3400000 {
+			compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "aer", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-lanes = <4>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi1>, <&msi2>, <&msi3>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie@3500000 {
+			compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "aer", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-lanes = <2>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi2>, <&msi3>, <&msi1>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie@3600000 {
+			compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
+			       0x50 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "aer", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-lanes = <2>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi3>, <&msi1>, <&msi2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			compatible = "shared-dma-pool";
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+			no-map;
+		};
+
+		qman_fqd: qman-fqd {
+			compatible = "shared-dma-pool";
+			size = <0 0x800000>;
+			alignment = <0 0x800000>;
+			no-map;
+		};
+
+		qman_pfdr: qman-pfdr {
+			compatible = "shared-dma-pool";
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+			no-map;
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
+
+#include "qoriq-qman-portals.dtsi"
+#include "qoriq-bman-portals.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
new file mode 100644
index 000000000..6f48d21b9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NXP LS1088A QDS Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a.dtsi"
+
+/ {
+	model = "LS1088A QDS Board";
+	compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-switch@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461a";
+				reg = <0x4c>;
+			};
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+				/* IRQ10_B */
+				interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			eeprom@56 {
+				compatible = "atmel,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c512";
+				reg = <0x57>;
+			};
+		};
+	};
+};
+
+&ifc {
+	ranges = <0 0 0x5 0x80000000 0x08000000
+		  2 0 0x5 0x30000000 0x00010000
+		  3 0 0x5 0x20000000 0x00010000>;
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x2 0x0 0x10000>;
+	};
+
+	fpga: board-control@3,0 {
+		compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis";
+		reg = <0x3 0x0 0x0000100>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
new file mode 100644
index 000000000..8e925df6c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NXP LS1088A RDB Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a.dtsi"
+
+/ {
+	model = "LS1088A RDB Board";
+	compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-switch@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461a";
+				reg = <0x4c>;
+			};
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+				/* IRQ10_B */
+				interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
+
+&ifc {
+	ranges = <0 0 0x5 0x30000000 0x00010000
+		  2 0 0x5 0x20000000 0x00010000>;
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x0 0x0 0x10000>;
+	};
+
+	fpga: board-control@2,0 {
+		compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis";
+		reg = <0x2 0x0 0x0000100>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
new file mode 100644
index 000000000..b3b87c4c7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -0,0 +1,650 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for NXP Layerscape-1088A family SoC.
+ *
+ * Copyright 2017 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "fsl,ls1088a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		crypto = &crypto;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* We have 2 clusters having 4 Cortex-A53 cores each */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clocks = <&clockgen 1 0>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clocks = <&clockgen 1 0>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clocks = <&clockgen 1 0>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clocks = <&clockgen 1 0>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			clocks = <&clockgen 1 1>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			clocks = <&clockgen 1 1>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			clocks = <&clockgen 1 1>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			clocks = <&clockgen 1 1>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		CPU_PH20: cpu-ph20 {
+			compatible = "arm,idle-state";
+			idle-state-name = "PH20";
+			arm,psci-suspend-param = <0x0>;
+			entry-latency-us = <1000>;
+			exit-latency-us = <1000>;
+			min-residency-us = <3000>;
+		};
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x06100000 0 0x100000>, /* GICR(RD_base+SGI_base)*/
+		      <0x0 0x0c0c0000 0 0x2000>, /* GICC */
+		      <0x0 0x0c0d0000 0 0x1000>, /* GICH */
+		      <0x0 0x0c0e0000 0 0x20000>; /* GICV */
+		interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		its: gic-its@6020000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0x6020000 0 0x20000>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu4 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
+			     <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
+			     <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
+			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
+	};
+
+	fsl_mc: fsl-mc@80c000000 {
+		compatible = "fsl,qoriq-mc";
+		reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
+		      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+		msi-parent = <&its>;
+		#address-cells = <3>;
+		#size-cells = <1>;
+
+		/*
+		 * Region type 0x0 - MC portals
+		 * Region type 0x1 - QBMAN portals
+		 */
+		ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+			  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+		dpmacs {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dpmac1: dpmac@1 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <1>;
+			};
+
+			dpmac2: dpmac@2 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <2>;
+			};
+
+			dpmac3: dpmac@3 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <3>;
+			};
+
+			dpmac4: dpmac@4 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <4>;
+			};
+
+			dpmac5: dpmac@5 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <5>;
+			};
+
+			dpmac6: dpmac@6 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <6>;
+			};
+
+			dpmac7: dpmac@7 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <7>;
+			};
+
+			dpmac8: dpmac@8 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <8>;
+			};
+
+			dpmac9: dpmac@9 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <9>;
+			};
+
+			dpmac10: dpmac@a {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0xa>;
+			};
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clockgen: clocking@1300000 {
+			compatible = "fsl,ls1088a-clockgen";
+			reg = <0 0x1300000 0 0xa0000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		dcfg: dcfg@1e00000 {
+			compatible = "fsl,ls1088a-dcfg", "syscon";
+			reg = <0x0 0x1e00000 0x0 0x10000>;
+			little-endian;
+		};
+
+		tmu: tmu@1f80000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f80000 0x0 0x10000>;
+			interrupts = <0 23 0x4>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+			fsl,tmu-calibration =
+				/* Calibration data group 1 */
+				<0x00000000 0x00000026
+				0x00000001 0x0000002d
+				0x00000002 0x00000032
+				0x00000003 0x00000039
+				0x00000004 0x0000003f
+				0x00000005 0x00000046
+				0x00000006 0x0000004d
+				0x00000007 0x00000054
+				0x00000008 0x0000005a
+				0x00000009 0x00000061
+				0x0000000a 0x0000006a
+				0x0000000b 0x00000071
+				/* Calibration data group 2 */
+				0x00010000 0x00000025
+				0x00010001 0x0000002c
+				0x00010002 0x00000035
+				0x00010003 0x0000003d
+				0x00010004 0x00000045
+				0x00010005 0x0000004e
+				0x00010006 0x00000057
+				0x00010007 0x00000061
+				0x00010008 0x0000006b
+				0x00010009 0x00000076
+				/* Calibration data group 3 */
+				0x00020000 0x00000029
+				0x00020001 0x00000033
+				0x00020002 0x0000003d
+				0x00020003 0x00000049
+				0x00020004 0x00000056
+				0x00020005 0x00000061
+				0x00020006 0x0000006d
+				/* Calibration data group 4 */
+				0x00030000 0x00000021
+				0x00030001 0x0000002a
+				0x00030002 0x0000003c
+				0x00030003 0x0000004e>;
+			little-endian;
+			#thermal-sensor-cells = <1>;
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21c0500 0x0 0x100>;
+			clocks = <&clockgen 4 3>;
+			interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21c0600 0x0 0x100>;
+			clocks = <&clockgen 4 3>;
+			interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ifc: ifc@2240000 {
+			compatible = "fsl,ifc", "simple-bus";
+			reg = <0x0 0x2240000 0x0 0x20000>;
+			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2000000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 3>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2010000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2010000 0x0 0x10000>;
+			interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 3>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@2020000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2020000 0x0 0x10000>;
+			interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 3>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@2030000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2030000 0x0 0x10000>;
+			interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 3>;
+			status = "disabled";
+		};
+
+		esdhc: esdhc@2140000 {
+			compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x2140000 0x0 0x10000>;
+			interrupts = <0 28 0x4>; /* Level high type */
+			clock-frequency = <0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			little-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		usb0: usb3@3100000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+			status = "disabled";
+		};
+
+		usb1: usb3@3110000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3110000 0x0 0x10000>;
+			interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+			status = "disabled";
+		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1088a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>,
+				<0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 3>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		crypto: crypto@8000000 {
+			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+			fsl,sec-era = <8>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x8000000 0x100000>;
+			reg = <0x00 0x8000000 0x0 0x100000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pcie@3400000 {
+			compatible = "fsl,ls1088a-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+			       0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupt-names = "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-lanes = <4>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie@3500000 {
+			compatible = "fsl,ls1088a-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+			       0x28 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupt-names = "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-lanes = <4>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 114 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 0 115 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 0 116 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 0 117 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie@3600000 {
+			compatible = "fsl,ls1088a-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
+			       0x30 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupt-names = "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-lanes = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 119 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 0 120 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 0 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 0 122 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cluster1_core0_watchdog: wdt@c000000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc000000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster1_core1_watchdog: wdt@c010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc010000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster1_core2_watchdog: wdt@c020000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc020000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster1_core3_watchdog: wdt@c030000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc030000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster2_core0_watchdog: wdt@c100000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc100000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster2_core1_watchdog: wdt@c110000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc110000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster2_core2_watchdog: wdt@c120000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc120000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster2_core3_watchdog: wdt@c130000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc130000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
new file mode 100644
index 000000000..f6c3ee78a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2080a QDS Board.
+ *
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2080a.dtsi"
+#include "fsl-ls208xa-qds.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2080a QDS Board";
+	compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
new file mode 100644
index 000000000..448943560
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2080a RDB Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2080a.dtsi"
+#include "fsl-ls208xa-rdb.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2080a RDB Board";
+	compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
new file mode 100644
index 000000000..551730503
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2080a software Simulator model
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2080a.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2080a software Simulator model";
+	compatible = "fsl,ls2080a-simu", "fsl,ls2080a";
+
+	ethernet@2210000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x0 0x2210000 0x0 0x100>;
+		interrupts = <0 58 0x1>;
+	};
+};
+
+&ifc {
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
new file mode 100644
index 000000000..f9c1d30cf
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-2080A family SoC.
+ *
+ * Copyright 2014-2016 Freescale Semiconductor, Inc.
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ */
+
+#include "fsl-ls208xa.dtsi"
+
+&cpu {
+	cpu0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0>;
+		clocks = <&clockgen 1 0>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster0_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1>;
+		clocks = <&clockgen 1 0>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster0_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu2: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x100>;
+		clocks = <&clockgen 1 1>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster1_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu3: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x101>;
+		clocks = <&clockgen 1 1>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster1_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu4: cpu@200 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x200>;
+		clocks = <&clockgen 1 2>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster2_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu5: cpu@201 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x201>;
+		clocks = <&clockgen 1 2>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster2_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu6: cpu@300 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x300>;
+		clocks = <&clockgen 1 3>;
+		next-level-cache = <&cluster3_l2>;
+		cpu-idle-states = <&CPU_PW20>;
+		#cooling-cells = <2>;
+	};
+
+	cpu7: cpu@301 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x301>;
+		clocks = <&clockgen 1 3>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster3_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cluster0_l2: l2-cache0 {
+		compatible = "cache";
+	};
+
+	cluster1_l2: l2-cache1 {
+		compatible = "cache";
+	};
+
+	cluster2_l2: l2-cache2 {
+		compatible = "cache";
+	};
+
+	cluster3_l2: l2-cache3 {
+		compatible = "cache";
+	};
+
+	CPU_PW20: cpu-pw20 {
+		compatible = "arm,idle-state";
+		idle-state-name = "PW20";
+		arm,psci-suspend-param = <0x00010000>;
+		entry-latency-us = <2000>;
+		exit-latency-us = <2000>;
+		min-residency-us = <6000>;
+	};
+};
+
+&pcie1 {
+	reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+	       0x10 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000   /* downstream I/O */
+		  0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+};
+
+&pcie2 {
+	reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+	       0x12 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000   /* downstream I/O */
+		  0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+};
+
+&pcie3 {
+	reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
+	       0x14 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000   /* downstream I/O */
+		  0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+};
+
+&pcie4 {
+	reg = <0x00 0x03700000 0x0 0x00100000   /* controller registers */
+	       0x16 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000   /* downstream I/O */
+		  0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
new file mode 100644
index 000000000..7c17b1bd4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2088A QDS Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2088a.dtsi"
+#include "fsl-ls208xa-qds.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2088A QDS Board";
+	compatible = "fsl,ls2088a-qds", "fsl,ls2088a";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
new file mode 100644
index 000000000..f6b4d75a2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2088A RDB Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2088a.dtsi"
+#include "fsl-ls208xa-rdb.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2088A RDB Board";
+	compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
new file mode 100644
index 000000000..7c882da3f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-2088A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ */
+
+#include "fsl-ls208xa.dtsi"
+
+&cpu {
+	cpu0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x0>;
+		clocks = <&clockgen 1 0>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster0_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x1>;
+		clocks = <&clockgen 1 0>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster0_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu2: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x100>;
+		clocks = <&clockgen 1 1>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster1_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu3: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x101>;
+		clocks = <&clockgen 1 1>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster1_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu4: cpu@200 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x200>;
+		clocks = <&clockgen 1 2>;
+		next-level-cache = <&cluster2_l2>;
+		cpu-idle-states = <&CPU_PW20>;
+		#cooling-cells = <2>;
+	};
+
+	cpu5: cpu@201 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x201>;
+		clocks = <&clockgen 1 2>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster2_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu6: cpu@300 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x300>;
+		clocks = <&clockgen 1 3>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster3_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu7: cpu@301 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x301>;
+		clocks = <&clockgen 1 3>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster3_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cluster0_l2: l2-cache0 {
+		compatible = "cache";
+	};
+
+	cluster1_l2: l2-cache1 {
+		compatible = "cache";
+	};
+
+	cluster2_l2: l2-cache2 {
+		compatible = "cache";
+	};
+
+	cluster3_l2: l2-cache3 {
+		compatible = "cache";
+	};
+
+	CPU_PW20: cpu-pw20 {
+		compatible = "arm,idle-state";
+		idle-state-name = "PW20";
+		arm,psci-suspend-param = <0x0>;
+		entry-latency-us = <2000>;
+		exit-latency-us = <2000>;
+		min-residency-us = <6000>;
+	};
+};
+
+&pcie1 {
+	compatible = "fsl,ls2088a-pcie", "snps,dw-pcie";
+	reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+	       0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>;
+};
+
+&pcie2 {
+	compatible = "fsl,ls2088a-pcie", "snps,dw-pcie";
+	reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+	       0x28 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>;
+};
+
+&pcie3 {
+	compatible = "fsl,ls2088a-pcie", "snps,dw-pcie";
+	reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
+	       0x30 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>;
+};
+
+&pcie4 {
+	compatible = "fsl,ls2088a-pcie", "snps,dw-pcie";
+	reg = <0x00 0x03700000 0x0 0x00100000   /* controller registers */
+	       0x38 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x38 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0x38 0x40000000 0x0 0x40000000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
new file mode 100644
index 000000000..c11f52e7a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2080A QDS Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ */
+
+&esdhc {
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0x0 0x0 0x5 0x80000000 0x08000000
+		  0x2 0x0 0x5 0x30000000 0x00010000
+		  0x3 0x0 0x5 0x20000000 0x00010000>;
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+	     compatible = "fsl,ifc-nand";
+	     reg = <0x2 0x0 0x10000>;
+	};
+
+	cpld@3,0 {
+	     reg = <0x3 0x0 0x10000>;
+	     compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pca9547@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x00>;
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x02>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			adt7481@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+&dspi {
+	status = "okay";
+	dflash0: n25q128a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <0>;
+	};
+	dflash1: sst25wf040b@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <1>;
+	};
+	dflash2: en25s64@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <2>;
+	};
+};
+
+&qspi {
+	status = "okay";
+	flash0: s25fl256s1@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+	flash2: s25fl256s1@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <20000000>;
+		reg = <2>;
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
new file mode 100644
index 000000000..6fd7f6308
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2080A RDB Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ */
+
+&esdhc {
+	status = "okay";
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0x0 0x0 0x5 0x80000000 0x08000000
+		  0x2 0x0 0x5 0x30000000 0x00010000
+		  0x3 0x0 0x5 0x20000000 0x00010000>;
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+	     compatible = "fsl,ifc-nand";
+	     reg = <0x2 0x0 0x10000>;
+	};
+
+	cpld@3,0 {
+	     reg = <0x3 0x0 0x10000>;
+	     compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
+	};
+
+};
+
+&i2c0 {
+	status = "okay";
+	pca9547@75 {
+		compatible = "nxp,pca9547";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x01>;
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x02>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			adt7481@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+&dspi {
+	status = "okay";
+	dflash0: n25q512a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <0>;
+	};
+};
+
+&qspi {
+	status = "disabled";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
new file mode 100644
index 000000000..73a60fd51
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -0,0 +1,759 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-2080A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "fsl,ls2080a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		crypto = &crypto;
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
+	cpu: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+		      /* DRAM space - 1, size : 2 GB DRAM */
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+			<0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */
+			<0x0 0x0c0c0000 0 0x2000>, /* GICC */
+			<0x0 0x0c0d0000 0 0x1000>, /* GICH */
+			<0x0 0x0c0e0000 0 0x20000>; /* GICV */
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		interrupts = <1 9 0x4>;
+
+		its: gic-its@6020000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0x6020000 0 0x20000>;
+		};
+	};
+
+	rstcr: syscon@1e60000 {
+		compatible = "fsl,ls2080a-rstcr", "syscon";
+		reg = <0x0 0x1e60000 0x0 0x4>;
+	};
+
+	reboot {
+		compatible ="syscon-reboot";
+		regmap = <&rstcr>;
+		offset = <0x0>;
+		mask = <0x2>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu 4>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu2 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+				map2 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu4 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+				map3 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu6 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
+			     <1 14 4>, /* Physical Non-Secure PPI, active-low */
+			     <1 11 4>, /* Virtual PPI, active-low */
+			     <1 10 4>; /* Hypervisor PPI, active-low */
+		fsl,erratum-a008585;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clockgen: clocking@1300000 {
+			compatible = "fsl,ls2080a-clockgen";
+			reg = <0 0x1300000 0 0xa0000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		dcfg: dcfg@1e00000 {
+			compatible = "fsl,ls2080a-dcfg", "syscon";
+			reg = <0x0 0x1e00000 0x0 0x10000>;
+			little-endian;
+		};
+
+		tmu: tmu@1f80000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f80000 0x0 0x10000>;
+			interrupts = <0 23 0x4>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+			fsl,tmu-calibration = <0x00000000 0x00000026
+					       0x00000001 0x0000002d
+					       0x00000002 0x00000032
+					       0x00000003 0x00000039
+					       0x00000004 0x0000003f
+					       0x00000005 0x00000046
+					       0x00000006 0x0000004d
+					       0x00000007 0x00000054
+					       0x00000008 0x0000005a
+					       0x00000009 0x00000061
+					       0x0000000a 0x0000006a
+					       0x0000000b 0x00000071
+
+					       0x00010000 0x00000025
+					       0x00010001 0x0000002c
+					       0x00010002 0x00000035
+					       0x00010003 0x0000003d
+					       0x00010004 0x00000045
+					       0x00010005 0x0000004e
+					       0x00010006 0x00000057
+					       0x00010007 0x00000061
+					       0x00010008 0x0000006b
+					       0x00010009 0x00000076
+
+					       0x00020000 0x00000029
+					       0x00020001 0x00000033
+					       0x00020002 0x0000003d
+					       0x00020003 0x00000049
+					       0x00020004 0x00000056
+					       0x00020005 0x00000061
+					       0x00020006 0x0000006d
+
+					       0x00030000 0x00000021
+					       0x00030001 0x0000002a
+					       0x00030002 0x0000003c
+					       0x00030003 0x0000004e>;
+			little-endian;
+			#thermal-sensor-cells = <1>;
+		};
+
+		serial0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21c0500 0x0 0x100>;
+			clocks = <&clockgen 4 3>;
+			interrupts = <0 32 0x4>; /* Level high type */
+		};
+
+		serial1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21c0600 0x0 0x100>;
+			clocks = <&clockgen 4 3>;
+			interrupts = <0 32 0x4>; /* Level high type */
+		};
+
+		cluster1_core0_watchdog: wdt@c000000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc000000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster1_core1_watchdog: wdt@c010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc010000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster2_core0_watchdog: wdt@c100000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc100000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster2_core1_watchdog: wdt@c110000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc110000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster3_core0_watchdog: wdt@c200000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc200000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster3_core1_watchdog: wdt@c210000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc210000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster4_core0_watchdog: wdt@c300000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc300000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster4_core1_watchdog: wdt@c310000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc310000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		crypto: crypto@8000000 {
+			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+			fsl,sec-era = <8>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x8000000 0x100000>;
+			reg = <0x00 0x8000000 0x0 0x100000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg	   = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		fsl_mc: fsl-mc@80c000000 {
+			compatible = "fsl,qoriq-mc";
+			reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
+			      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+			msi-parent = <&its>;
+			#address-cells = <3>;
+			#size-cells = <1>;
+
+			/*
+			 * Region type 0x0 - MC portals
+			 * Region type 0x1 - QBMAN portals
+			 */
+			ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+				  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+			/*
+			 * Define the maximum number of MACs present on the SoC.
+			 */
+			dpmacs {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dpmac1: dpmac@1 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x1>;
+				};
+
+				dpmac2: dpmac@2 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x2>;
+				};
+
+				dpmac3: dpmac@3 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x3>;
+				};
+
+				dpmac4: dpmac@4 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x4>;
+				};
+
+				dpmac5: dpmac@5 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x5>;
+				};
+
+				dpmac6: dpmac@6 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x6>;
+				};
+
+				dpmac7: dpmac@7 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x7>;
+				};
+
+				dpmac8: dpmac@8 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x8>;
+				};
+
+				dpmac9: dpmac@9 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x9>;
+				};
+
+				dpmac10: dpmac@a {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xa>;
+				};
+
+				dpmac11: dpmac@b {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xb>;
+				};
+
+				dpmac12: dpmac@c {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xc>;
+				};
+
+				dpmac13: dpmac@d {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xd>;
+				};
+
+				dpmac14: dpmac@e {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xe>;
+				};
+
+				dpmac15: dpmac@f {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xf>;
+				};
+
+				dpmac16: dpmac@10 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x10>;
+				};
+			};
+		};
+
+		smmu: iommu@5000000 {
+			compatible = "arm,mmu-500";
+			reg = <0 0x5000000 0 0x800000>;
+			#global-interrupts = <12>;
+			interrupts = <0 13 4>, /* global secure fault */
+				     <0 14 4>, /* combined secure interrupt */
+				     <0 15 4>, /* global non-secure fault */
+				     <0 16 4>, /* combined non-secure interrupt */
+				/* performance counter interrupts 0-7 */
+				     <0 211 4>, <0 212 4>,
+				     <0 213 4>, <0 214 4>,
+				     <0 215 4>, <0 216 4>,
+				     <0 217 4>, <0 218 4>,
+				/* per context interrupt, 64 interrupts */
+				     <0 146 4>, <0 147 4>,
+				     <0 148 4>, <0 149 4>,
+				     <0 150 4>, <0 151 4>,
+				     <0 152 4>, <0 153 4>,
+				     <0 154 4>, <0 155 4>,
+				     <0 156 4>, <0 157 4>,
+				     <0 158 4>, <0 159 4>,
+				     <0 160 4>, <0 161 4>,
+				     <0 162 4>, <0 163 4>,
+				     <0 164 4>, <0 165 4>,
+				     <0 166 4>, <0 167 4>,
+				     <0 168 4>, <0 169 4>,
+				     <0 170 4>, <0 171 4>,
+				     <0 172 4>, <0 173 4>,
+				     <0 174 4>, <0 175 4>,
+				     <0 176 4>, <0 177 4>,
+				     <0 178 4>, <0 179 4>,
+				     <0 180 4>, <0 181 4>,
+				     <0 182 4>, <0 183 4>,
+				     <0 184 4>, <0 185 4>,
+				     <0 186 4>, <0 187 4>,
+				     <0 188 4>, <0 189 4>,
+				     <0 190 4>, <0 191 4>,
+				     <0 192 4>, <0 193 4>,
+				     <0 194 4>, <0 195 4>,
+				     <0 196 4>, <0 197 4>,
+				     <0 198 4>, <0 199 4>,
+				     <0 200 4>, <0 201 4>,
+				     <0 202 4>, <0 203 4>,
+				     <0 204 4>, <0 205 4>,
+				     <0 206 4>, <0 207 4>,
+				     <0 208 4>, <0 209 4>;
+			mmu-masters = <&fsl_mc 0x300 0>;
+		};
+
+		dspi: spi@2100000 {
+			status = "disabled";
+			compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <0 26 0x4>; /* Level high type */
+			clocks = <&clockgen 4 3>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+		};
+
+		esdhc: esdhc@2140000 {
+			status = "disabled";
+			compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x2140000 0x0 0x10000>;
+			interrupts = <0 28 0x4>; /* Level high type */
+			clocks = <&clockgen 4 1>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			little-endian;
+			bus-width = <4>;
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <0 36 0x4>; /* Level high type */
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <0 36 0x4>; /* Level high type */
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <0 37 0x4>; /* Level high type */
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <0 37 0x4>; /* Level high type */
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		i2c0: i2c@2000000 {
+			status = "disabled";
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts = <0 34 0x4>; /* Level high type */
+			clock-names = "i2c";
+			clocks = <&clockgen 4 3>;
+		};
+
+		i2c1: i2c@2010000 {
+			status = "disabled";
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2010000 0x0 0x10000>;
+			interrupts = <0 34 0x4>; /* Level high type */
+			clock-names = "i2c";
+			clocks = <&clockgen 4 3>;
+		};
+
+		i2c2: i2c@2020000 {
+			status = "disabled";
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2020000 0x0 0x10000>;
+			interrupts = <0 35 0x4>; /* Level high type */
+			clock-names = "i2c";
+			clocks = <&clockgen 4 3>;
+		};
+
+		i2c3: i2c@2030000 {
+			status = "disabled";
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2030000 0x0 0x10000>;
+			interrupts = <0 35 0x4>; /* Level high type */
+			clock-names = "i2c";
+			clocks = <&clockgen 4 3>;
+		};
+
+		ifc: ifc@2240000 {
+			compatible = "fsl,ifc", "simple-bus";
+			reg = <0x0 0x2240000 0x0 0x20000>;
+			interrupts = <0 21 0x4>; /* Level high type */
+			little-endian;
+			#address-cells = <2>;
+			#size-cells = <1>;
+
+			ranges = <0 0 0x5 0x80000000 0x08000000
+				  2 0 0x5 0x30000000 0x00010000
+				  3 0 0x5 0x20000000 0x00010000>;
+		};
+
+		qspi: spi@20c0000 {
+			status = "disabled";
+			compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20c0000 0x0 0x10000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <0 25 0x4>; /* Level high type */
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "qspi_en", "qspi";
+		};
+
+		pcie1: pcie@3400000 {
+			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
+				     "snps,dw-pcie";
+			reg-names = "regs", "config";
+			interrupts = <0 108 0x4>; /* Level high type */
+			interrupt-names = "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-lanes = <4>;
+			bus-range = <0x0 0xff>;
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
+					<0000 0 0 2 &gic 0 0 0 110 4>,
+					<0000 0 0 3 &gic 0 0 0 111 4>,
+					<0000 0 0 4 &gic 0 0 0 112 4>;
+		};
+
+		pcie2: pcie@3500000 {
+			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
+				     "snps,dw-pcie";
+			reg-names = "regs", "config";
+			interrupts = <0 113 0x4>; /* Level high type */
+			interrupt-names = "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-lanes = <4>;
+			bus-range = <0x0 0xff>;
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
+					<0000 0 0 2 &gic 0 0 0 115 4>,
+					<0000 0 0 3 &gic 0 0 0 116 4>,
+					<0000 0 0 4 &gic 0 0 0 117 4>;
+		};
+
+		pcie3: pcie@3600000 {
+			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
+				     "snps,dw-pcie";
+			reg-names = "regs", "config";
+			interrupts = <0 118 0x4>; /* Level high type */
+			interrupt-names = "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-lanes = <8>;
+			bus-range = <0x0 0xff>;
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
+					<0000 0 0 2 &gic 0 0 0 120 4>,
+					<0000 0 0 3 &gic 0 0 0 121 4>,
+					<0000 0 0 4 &gic 0 0 0 122 4>;
+		};
+
+		pcie4: pcie@3700000 {
+			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
+				     "snps,dw-pcie";
+			reg-names = "regs", "config";
+			interrupts = <0 123 0x4>; /* Level high type */
+			interrupt-names = "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-lanes = <4>;
+			bus-range = <0x0 0xff>;
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
+					<0000 0 0 2 &gic 0 0 0 125 4>,
+					<0000 0 0 3 &gic 0 0 0 126 4>,
+					<0000 0 0 4 &gic 0 0 0 127 4>;
+		};
+
+		sata0: sata@3200000 {
+			status = "disabled";
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>;
+			interrupts = <0 133 0x4>; /* Level high type */
+			clocks = <&clockgen 4 3>;
+			dma-coherent;
+		};
+
+		sata1: sata@3210000 {
+			status = "disabled";
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3210000 0x0 0x10000>;
+			interrupts = <0 136 0x4>; /* Level high type */
+			clocks = <&clockgen 4 3>;
+			dma-coherent;
+		};
+
+		usb0: usb3@3100000 {
+			status = "disabled";
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <0 80 0x4>; /* Level high type */
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+		};
+
+		usb1: usb3@3110000 {
+			status = "disabled";
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3110000 0x0 0x10000>;
+			interrupts = <0 81 0x4>; /* Level high type */
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+		};
+
+		ccn@4000000 {
+			compatible = "arm,ccn-504";
+			reg = <0x0 0x04000000 0x0 0x01000000>;
+			interrupts = <0 12 4>;
+		};
+	};
+
+	ddr1: memory-controller@1080000 {
+		compatible = "fsl,qoriq-memory-controller";
+		reg = <0x0 0x1080000 0x0 0x1000>;
+		interrupts = <0 17 0x4>;
+		little-endian;
+	};
+
+	ddr2: memory-controller@1090000 {
+		compatible = "fsl,qoriq-memory-controller";
+		reg = <0x0 0x1090000 0x0 0x1000>;
+		interrupts = <0 18 0x4>;
+		little-endian;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
new file mode 100644
index 000000000..ff1aba5fa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ BMan Portals device tree
+ *
+ * Copyright 2011-2016 Freescale Semiconductor Inc.
+ *
+ */
+
+&bportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		/*
+		 * bootloader fix-ups are expected to provide the
+		 * "fsl,bman-portal-<hardware revision>" compatible
+		 */
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x4000000 0x4000>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@10000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x10000 0x4000>, <0x4010000 0x4000>;
+		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@20000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x20000 0x4000>, <0x4020000 0x4000>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@30000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x30000 0x4000>, <0x4030000 0x4000>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@40000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x40000 0x4000>, <0x4040000 0x4000>;
+		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@50000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x50000 0x4000>, <0x4050000 0x4000>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@60000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x60000 0x4000>, <0x4060000 0x4000>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@70000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x70000 0x4000>, <0x4070000 0x4000>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@80000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x80000 0x4000>, <0x4080000 0x4000>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@90000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x90000 0x4000>, <0x4090000 0x4000>;
+		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
new file mode 100644
index 000000000..dbd2fc3ba
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 10g port #0 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x90000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb0000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
+		pcsphy-handle = <&pcsphy6>;
+	};
+
+	mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+
+		pcsphy6: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
new file mode 100644
index 000000000..6fc5d2560
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 10g port #1 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x11: port@91000 {
+		cell-index = <0x11>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x91000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x31: port@b1000 {
+		cell-index = <0x31>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb1000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f2000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>;
+		pcsphy-handle = <&pcsphy7>;
+	};
+
+	mdio@f3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf3000 0x1000>;
+
+		pcsphy7: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
new file mode 100644
index 000000000..4e02276fc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #0 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman0_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy0>;
+	};
+
+	mdio@e1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe1000 0x1000>;
+
+		pcsphy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
new file mode 100644
index 000000000..0312fa43f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #1 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman0_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy1>;
+	};
+
+	mdio@e3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe3000 0x1000>;
+
+		pcsphy1: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
new file mode 100644
index 000000000..af2df0797
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #2 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman0_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy2>;
+	};
+
+	mdio@e5000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe5000 0x1000>;
+
+		pcsphy2: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
new file mode 100644
index 000000000..4ac98dc8b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #3 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman0_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy3>;
+	};
+
+	mdio@e7000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe7000 0x1000>;
+
+		pcsphy3: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
new file mode 100644
index 000000000..bd932d8b0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #4 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman0_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy4>;
+	};
+
+	mdio@e9000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe9000 0x1000>;
+
+		pcsphy4: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
new file mode 100644
index 000000000..7de1c5203
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #5 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x0d: port@8d000 {
+		cell-index = <0xd>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8d000 0x1000>;
+	};
+
+	fman0_tx_0x2d: port@ad000 {
+		cell-index = <0x2d>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xad000 0x1000>;
+	};
+
+	ethernet@ea000 {
+		cell-index = <5>;
+		compatible = "fsl,fman-memac";
+		reg = <0xea000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy5>;
+	};
+
+	mdio@eb000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xeb000 0x1000>;
+
+		pcsphy5: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
new file mode 100644
index 000000000..263b972a6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman0: fman@1a00000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	compatible = "fsl,fman";
+	ranges = <0x0 0x0 0x1a00000 0xfe000>;
+	reg = <0x0 0x1a00000 0x0 0xfe000>;
+	interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clockgen 3 0>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x800 0x10>;
+	ptimer-handle = <&ptp_timer0>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x60000>;
+	};
+
+	fman0_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman0_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman0_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman0_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x85000 0x1000>;
+	};
+
+	fman0_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x86000 0x1000>;
+	};
+
+	fman0_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x87000 0x1000>;
+	};
+
+	mdio0: mdio@fc000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfc000 0x1000>;
+	};
+
+	xmdio0: mdio@fd000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfd000 0x1000>;
+	};
+};
+
+ptp_timer0: ptp-timer@1afe000 {
+	compatible = "fsl,fman-ptp-timer";
+	reg = <0x0 0x1afe000 0x0 0x1000>;
+	interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clockgen 3 0>;
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
new file mode 100644
index 000000000..e3bec08b1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ QMan Portals device tree
+ *
+ * Copyright 2011-2016 Freescale Semiconductor Inc.
+ *
+ */
+
+&qportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		/*
+		 * bootloader fix-ups are expected to provide the
+		 * "fsl,bman-portal-<hardware revision>" compatible
+		 */
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x4000000 0x4000>;
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <0>;
+	};
+
+	qportal1: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x4010000 0x4000>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <1>;
+	};
+
+	qportal2: qman-portal@20000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x20000 0x4000>, <0x4020000 0x4000>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <2>;
+	};
+
+	qportal3: qman-portal@30000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x30000 0x4000>, <0x4030000 0x4000>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <3>;
+	};
+
+	qportal4: qman-portal@40000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x40000 0x4000>, <0x4040000 0x4000>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <4>;
+	};
+
+	qportal5: qman-portal@50000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x50000 0x4000>, <0x4050000 0x4000>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <5>;
+	};
+
+	qportal6: qman-portal@60000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x60000 0x4000>, <0x4060000 0x4000>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <6>;
+	};
+
+	qportal7: qman-portal@70000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x70000 0x4000>, <0x4070000 0x4000>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <7>;
+	};
+
+	qportal8: qman-portal@80000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x80000 0x4000>, <0x4080000 0x4000>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <8>;
+	};
+
+	qportal9: qman-portal@90000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x90000 0x4000>, <0x4090000 0x4000>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <9>;
+	};
+};