Adding upstream version 4.19.304.upstream/4.19.304upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

4 files changed, 30 insertions, 48 deletions

diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index e9ee9ab90..4ca2c2887 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -30,7 +30,6 @@
  *
  */
 
-#include <linux/dma-map-ops.h> /* for dma_default_coherent */
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
@@ -624,18 +623,17 @@ u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
 		dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
 
 	/*
-	 * There is an erratum on certain Au1200/Au1550 revisions that could
-	 * result in "stale" data being DMA'ed. It has to do with the snoop
-	 * logic on the cache eviction buffer.  dma_default_coherent is set
-	 * to false on these parts.
+	 * There is an errata on the Au1200/Au1550 parts that could result
+	 * in "stale" data being DMA'ed. It has to do with the snoop logic on
+	 * the cache eviction buffer.  DMA_NONCOHERENT is on by default for
+	 * these parts. If it is fixed in the future, these dma_cache_inv will
+	 * just be nothing more than empty macros. See io.h.
 	 */
-	if (!dma_default_coherent)
-		dma_cache_wback_inv(KSEG0ADDR(buf), nbytes);
+	dma_cache_wback_inv((unsigned long)buf, nbytes);
 	dp->dscr_cmd0 |= DSCR_CMD0_V;	/* Let it rip */
 	wmb(); /* drain writebuffer */
 	dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
 	ctp->chan_ptr->ddma_dbell = 0;
-	wmb(); /* force doorbell write out to dma engine */
 
 	/* Get next descriptor pointer. */
 	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
@@ -687,18 +685,17 @@ u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
 			  dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
 #endif
 	/*
-	 * There is an erratum on certain Au1200/Au1550 revisions that could
-	 * result in "stale" data being DMA'ed. It has to do with the snoop
-	 * logic on the cache eviction buffer.  dma_default_coherent is set
-	 * to false on these parts.
+	 * There is an errata on the Au1200/Au1550 parts that could result in
+	 * "stale" data being DMA'ed. It has to do with the snoop logic on the
+	 * cache eviction buffer.  DMA_NONCOHERENT is on by default for these
+	 * parts. If it is fixed in the future, these dma_cache_inv will just
+	 * be nothing more than empty macros. See io.h.
 	 */
-	if (!dma_default_coherent)
-		dma_cache_inv(KSEG0ADDR(buf), nbytes);
+	dma_cache_inv((unsigned long)buf, nbytes);
 	dp->dscr_cmd0 |= DSCR_CMD0_V;	/* Let it rip */
 	wmb(); /* drain writebuffer */
 	dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
 	ctp->chan_ptr->ddma_dbell = 0;
-	wmb(); /* force doorbell write out to dma engine */
 
 	/* Get next descriptor pointer. */
 	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c
index 13e3c8485..548bd4db0 100644
--- a/arch/mips/alchemy/devboards/db1000.c
+++ b/arch/mips/alchemy/devboards/db1000.c
@@ -27,7 +27,6 @@
 #include <linux/interrupt.h>
 #include <linux/leds.h>
 #include <linux/mmc/host.h>
-#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/spi/spi.h>
@@ -174,14 +173,10 @@ static struct platform_device db1x00_audio_dev = {
 
 /******************************************************************************/
 
+#ifdef CONFIG_MMC_AU1X
 static irqreturn_t db1100_mmc_cd(int irq, void *ptr)
 {
-	void (*mmc_cd)(struct mmc_host *, unsigned long);
-	/* link against CONFIG_MMC=m */
-	mmc_cd = symbol_get(mmc_detect_change);
-	mmc_cd(ptr, msecs_to_jiffies(500));
-	symbol_put(mmc_detect_change);
-
+	mmc_detect_change(ptr, msecs_to_jiffies(500));
 	return IRQ_HANDLED;
 }
 
@@ -386,6 +381,7 @@ static struct platform_device db1100_mmc1_dev = {
 	.num_resources	= ARRAY_SIZE(au1100_mmc1_res),
 	.resource	= au1100_mmc1_res,
 };
+#endif /* CONFIG_MMC_AU1X */
 
 /******************************************************************************/
 
@@ -503,9 +499,11 @@ static struct platform_device *db1000_devs[] = {
 
 static struct platform_device *db1100_devs[] = {
 	&au1100_lcd_device,
+#ifdef CONFIG_MMC_AU1X
 	&db1100_mmc0_dev,
 	&db1100_mmc1_dev,
 	&db1000_irda_dev,
+#endif
 };
 
 int __init db1000_dev_setup(void)
diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c
index da7663770..48840e48e 100644
--- a/arch/mips/alchemy/devboards/db1200.c
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -23,7 +23,6 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/leds.h>
@@ -342,6 +341,7 @@ static struct platform_device db1200_ide_dev = {
 
 /**********************************************************************/
 
+#ifdef CONFIG_MMC_AU1X
 /* SD carddetects:  they're supposed to be edge-triggered, but ack
  * doesn't seem to work (CPLD Rev 2).  Instead, the screaming one
  * is disabled and its counterpart enabled.  The 200ms timeout is
@@ -355,14 +355,7 @@ static irqreturn_t db1200_mmc_cd(int irq, void *ptr)
 
 static irqreturn_t db1200_mmc_cdfn(int irq, void *ptr)
 {
-	void (*mmc_cd)(struct mmc_host *, unsigned long);
-
-	/* link against CONFIG_MMC=m */
-	mmc_cd = symbol_get(mmc_detect_change);
-	if (mmc_cd) {
-		mmc_cd(ptr, msecs_to_jiffies(200));
-		symbol_put(mmc_detect_change);
-	}
+	mmc_detect_change(ptr, msecs_to_jiffies(200));
 
 	msleep(100);	/* debounce */
 	if (irq == DB1200_SD0_INSERT_INT)
@@ -446,14 +439,7 @@ static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr)
 
 static irqreturn_t pb1200_mmc1_cdfn(int irq, void *ptr)
 {
-	void (*mmc_cd)(struct mmc_host *, unsigned long);
-
-	/* link against CONFIG_MMC=m */
-	mmc_cd = symbol_get(mmc_detect_change);
-	if (mmc_cd) {
-		mmc_cd(ptr, msecs_to_jiffies(200));
-		symbol_put(mmc_detect_change);
-	}
+	mmc_detect_change(ptr, msecs_to_jiffies(200));
 
 	msleep(100);	/* debounce */
 	if (irq == PB1200_SD1_INSERT_INT)
@@ -616,6 +602,7 @@ static struct platform_device pb1200_mmc1_dev = {
 	.num_resources	= ARRAY_SIZE(au1200_mmc1_res),
 	.resource	= au1200_mmc1_res,
 };
+#endif /* CONFIG_MMC_AU1X */
 
 /**********************************************************************/
 
@@ -783,7 +770,9 @@ static struct platform_device db1200_audiodma_dev = {
 static struct platform_device *db1200_devs[] __initdata = {
 	NULL,		/* PSC0, selected by S6.8 */
 	&db1200_ide_dev,
+#ifdef CONFIG_MMC_AU1X
 	&db1200_mmc0_dev,
+#endif
 	&au1200_lcd_dev,
 	&db1200_eth_dev,
 	&db1200_nand_dev,
@@ -794,7 +783,9 @@ static struct platform_device *db1200_devs[] __initdata = {
 };
 
 static struct platform_device *pb1200_devs[] __initdata = {
+#ifdef CONFIG_MMC_AU1X
 	&pb1200_mmc1_dev,
+#endif
 };
 
 /* Some peripheral base addresses differ on the PB1200 */
diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c
index efb318e03..664a5a783 100644
--- a/arch/mips/alchemy/devboards/db1300.c
+++ b/arch/mips/alchemy/devboards/db1300.c
@@ -17,7 +17,6 @@
 #include <linux/interrupt.h>
 #include <linux/ata_platform.h>
 #include <linux/mmc/host.h>
-#include <linux/module.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
@@ -449,6 +448,7 @@ static struct platform_device db1300_ide_dev = {
 
 /**********************************************************************/
 
+#ifdef CONFIG_MMC_AU1X
 static irqreturn_t db1300_mmc_cd(int irq, void *ptr)
 {
 	disable_irq_nosync(irq);
@@ -457,14 +457,7 @@ static irqreturn_t db1300_mmc_cd(int irq, void *ptr)
 
 static irqreturn_t db1300_mmc_cdfn(int irq, void *ptr)
 {
-	void (*mmc_cd)(struct mmc_host *, unsigned long);
-
-	/* link against CONFIG_MMC=m.  We can only be called once MMC core has
-	 * initialized the controller, so symbol_get() should always succeed.
-	 */
-	mmc_cd = symbol_get(mmc_detect_change);
-	mmc_cd(ptr, msecs_to_jiffies(200));
-	symbol_put(mmc_detect_change);
+	mmc_detect_change(ptr, msecs_to_jiffies(200));
 
 	msleep(100);	/* debounce */
 	if (irq == DB1300_SD1_INSERT_INT)
@@ -634,6 +627,7 @@ static struct platform_device db1300_sd0_dev = {
 	.resource	= au1300_sd0_res,
 	.num_resources	= ARRAY_SIZE(au1300_sd0_res),
 };
+#endif /* CONFIG_MMC_AU1X */
 
 /**********************************************************************/
 
@@ -764,8 +758,10 @@ static struct platform_device *db1300_dev[] __initdata = {
 	&db1300_5waysw_dev,
 	&db1300_nand_dev,
 	&db1300_ide_dev,
+#ifdef CONFIG_MMC_AU1X
 	&db1300_sd0_dev,
 	&db1300_sd1_dev,
+#endif
 	&db1300_lcd_dev,
 	&db1300_ac97_dev,
 	&db1300_i2s_dev,