Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 117 insertions, 0 deletions

diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c
new file mode 100644
index 000000000..f2973ce87
--- /dev/null
+++ b/arch/mips/kernel/sync-r4k.c
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Count register synchronisation.
+ *
+ * All CPUs will have their count registers synchronised to the CPU0 next time
+ * value. This can cause a small timewarp for CPU0. All other CPU's should
+ * not have done anything significant (but they may have had interrupts
+ * enabled briefly - prom_smp_finish() should not be responsible for enabling
+ * interrupts...)
+ */
+
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+#include <linux/cpumask.h>
+
+#include <asm/r4k-timer.h>
+#include <linux/atomic.h>
+#include <asm/barrier.h>
+#include <asm/mipsregs.h>
+
+static unsigned int initcount = 0;
+static atomic_t count_count_start = ATOMIC_INIT(0);
+static atomic_t count_count_stop = ATOMIC_INIT(0);
+
+#define COUNTON 100
+#define NR_LOOPS 3
+
+void synchronise_count_master(int cpu)
+{
+	int i;
+	unsigned long flags;
+
+	pr_info("Synchronize counters for CPU %u: ", cpu);
+
+	local_irq_save(flags);
+
+	/*
+	 * We loop a few times to get a primed instruction cache,
+	 * then the last pass is more or less synchronised and
+	 * the master and slaves each set their cycle counters to a known
+	 * value all at once. This reduces the chance of having random offsets
+	 * between the processors, and guarantees that the maximum
+	 * delay between the cycle counters is never bigger than
+	 * the latency of information-passing (cachelines) between
+	 * two CPUs.
+	 */
+
+	for (i = 0; i < NR_LOOPS; i++) {
+		/* slaves loop on '!= 2' */
+		while (atomic_read(&count_count_start) != 1)
+			mb();
+		atomic_set(&count_count_stop, 0);
+		smp_wmb();
+
+		/* Let the slave writes its count register */
+		atomic_inc(&count_count_start);
+
+		/* Count will be initialised to current timer */
+		if (i == 1)
+			initcount = read_c0_count();
+
+		/*
+		 * Everyone initialises count in the last loop:
+		 */
+		if (i == NR_LOOPS-1)
+			write_c0_count(initcount);
+
+		/*
+		 * Wait for slave to leave the synchronization point:
+		 */
+		while (atomic_read(&count_count_stop) != 1)
+			mb();
+		atomic_set(&count_count_start, 0);
+		smp_wmb();
+		atomic_inc(&count_count_stop);
+	}
+	/* Arrange for an interrupt in a short while */
+	write_c0_compare(read_c0_count() + COUNTON);
+
+	local_irq_restore(flags);
+
+	/*
+	 * i386 code reported the skew here, but the
+	 * count registers were almost certainly out of sync
+	 * so no point in alarming people
+	 */
+	pr_cont("done.\n");
+}
+
+void synchronise_count_slave(int cpu)
+{
+	int i;
+
+	/*
+	 * Not every cpu is online at the time this gets called,
+	 * so we first wait for the master to say everyone is ready
+	 */
+
+	for (i = 0; i < NR_LOOPS; i++) {
+		atomic_inc(&count_count_start);
+		while (atomic_read(&count_count_start) != 2)
+			mb();
+
+		/*
+		 * Everyone initialises count in the last loop:
+		 */
+		if (i == NR_LOOPS-1)
+			write_c0_count(initcount);
+
+		atomic_inc(&count_count_stop);
+		while (atomic_read(&count_count_stop) != 2)
+			mb();
+	}
+	/* Arrange for an interrupt in a short while */
+	write_c0_compare(read_c0_count() + COUNTON);
+}
+#undef NR_LOOPS