Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 264 insertions, 0 deletions

diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
new file mode 100644
index 000000000..5d4c5e5fb
--- /dev/null
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -0,0 +1,264 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2008 Dmitri Vorobiev
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/of_fdt.h>
+#include <linux/pci.h>
+#include <linux/screen_info.h>
+#include <linux/time.h>
+
+#include <asm/dma-coherence.h>
+#include <asm/fw/fw.h>
+#include <asm/mach-malta/malta-dtshim.h>
+#include <asm/mips-cps.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/malta.h>
+#include <asm/mips-boards/maltaint.h>
+#include <asm/dma.h>
+#include <asm/prom.h>
+#include <asm/traps.h>
+#ifdef CONFIG_VT
+#include <linux/console.h>
+#endif
+
+#define ROCIT_CONFIG_GEN0		0x1f403000
+#define  ROCIT_CONFIG_GEN0_PCI_IOCU	BIT(7)
+
+static struct resource standard_io_resources[] = {
+	{
+		.name = "dma1",
+		.start = 0x00,
+		.end = 0x1f,
+		.flags = IORESOURCE_IO | IORESOURCE_BUSY
+	},
+	{
+		.name = "timer",
+		.start = 0x40,
+		.end = 0x5f,
+		.flags = IORESOURCE_IO | IORESOURCE_BUSY
+	},
+	{
+		.name = "keyboard",
+		.start = 0x60,
+		.end = 0x6f,
+		.flags = IORESOURCE_IO | IORESOURCE_BUSY
+	},
+	{
+		.name = "dma page reg",
+		.start = 0x80,
+		.end = 0x8f,
+		.flags = IORESOURCE_IO | IORESOURCE_BUSY
+	},
+	{
+		.name = "dma2",
+		.start = 0xc0,
+		.end = 0xdf,
+		.flags = IORESOURCE_IO | IORESOURCE_BUSY
+	},
+};
+
+const char *get_system_type(void)
+{
+	return "MIPS Malta";
+}
+
+const char display_string[] = "	       LINUX ON MALTA	    ";
+
+#ifdef CONFIG_BLK_DEV_FD
+static void __init fd_activate(void)
+{
+	/*
+	 * Activate Floppy Controller in the SMSC FDC37M817 Super I/O
+	 * Controller.
+	 * Done by YAMON 2.00 onwards
+	 */
+	/* Entering config state. */
+	SMSC_WRITE(SMSC_CONFIG_ENTER, SMSC_CONFIG_REG);
+
+	/* Activate floppy controller. */
+	SMSC_WRITE(SMSC_CONFIG_DEVNUM, SMSC_CONFIG_REG);
+	SMSC_WRITE(SMSC_CONFIG_DEVNUM_FLOPPY, SMSC_DATA_REG);
+	SMSC_WRITE(SMSC_CONFIG_ACTIVATE, SMSC_CONFIG_REG);
+	SMSC_WRITE(SMSC_CONFIG_ACTIVATE_ENABLE, SMSC_DATA_REG);
+
+	/* Exit config state. */
+	SMSC_WRITE(SMSC_CONFIG_EXIT, SMSC_CONFIG_REG);
+}
+#endif
+
+static int __init plat_enable_iocoherency(void)
+{
+	int supported = 0;
+	u32 cfg;
+
+	if (mips_revision_sconid == MIPS_REVISION_SCON_BONITO) {
+		if (BONITO_PCICACHECTRL & BONITO_PCICACHECTRL_CPUCOH_PRES) {
+			BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_CPUCOH_EN;
+			pr_info("Enabled Bonito CPU coherency\n");
+			supported = 1;
+		}
+		if (strstr(fw_getcmdline(), "iobcuncached")) {
+			BONITO_PCICACHECTRL &= ~BONITO_PCICACHECTRL_IOBCCOH_EN;
+			BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG &
+				~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED |
+				  BONITO_PCIMEMBASECFG_MEMBASE1_CACHED);
+			pr_info("Disabled Bonito IOBC coherency\n");
+		} else {
+			BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_IOBCCOH_EN;
+			BONITO_PCIMEMBASECFG |=
+				(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED |
+				 BONITO_PCIMEMBASECFG_MEMBASE1_CACHED);
+			pr_info("Enabled Bonito IOBC coherency\n");
+		}
+	} else if (mips_cps_numiocu(0) != 0) {
+		/* Nothing special needs to be done to enable coherency */
+		pr_info("CMP IOCU detected\n");
+		cfg = __raw_readl((u32 *)CKSEG1ADDR(ROCIT_CONFIG_GEN0));
+		if (!(cfg & ROCIT_CONFIG_GEN0_PCI_IOCU)) {
+			pr_crit("IOCU OPERATION DISABLED BY SWITCH - DEFAULTING TO SW IO COHERENCY\n");
+			return 0;
+		}
+		supported = 1;
+	}
+	hw_coherentio = supported;
+	return supported;
+}
+
+static void __init plat_setup_iocoherency(void)
+{
+	if (plat_enable_iocoherency()) {
+		if (coherentio == IO_COHERENCE_DISABLED)
+			pr_info("Hardware DMA cache coherency disabled\n");
+		else
+			pr_info("Hardware DMA cache coherency enabled\n");
+	} else {
+		if (coherentio == IO_COHERENCE_ENABLED)
+			pr_info("Hardware DMA cache coherency unsupported, but enabled from command line!\n");
+		else
+			pr_info("Software DMA cache coherency enabled\n");
+	}
+}
+
+static void __init pci_clock_check(void)
+{
+	unsigned int __iomem *jmpr_p =
+		(unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int));
+	int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07;
+	static const int pciclocks[] __initconst = {
+		33, 20, 25, 30, 12, 16, 37, 10
+	};
+	int pciclock = pciclocks[jmpr];
+	char *optptr, *argptr = fw_getcmdline();
+
+	/*
+	 * If user passed a pci_clock= option, don't tack on another one
+	 */
+	optptr = strstr(argptr, "pci_clock=");
+	if (optptr && (optptr == argptr || optptr[-1] == ' '))
+		return;
+
+	if (pciclock != 33) {
+		pr_warn("WARNING: PCI clock is %dMHz, setting pci_clock\n",
+			pciclock);
+		argptr += strlen(argptr);
+		sprintf(argptr, " pci_clock=%d", pciclock);
+		if (pciclock < 20 || pciclock > 66)
+			pr_warn("WARNING: IDE timing calculations will be "
+			        "incorrect\n");
+	}
+}
+
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
+static void __init screen_info_setup(void)
+{
+	screen_info = (struct screen_info) {
+		.orig_x = 0,
+		.orig_y = 25,
+		.ext_mem_k = 0,
+		.orig_video_page = 0,
+		.orig_video_mode = 0,
+		.orig_video_cols = 80,
+		.unused2 = 0,
+		.orig_video_ega_bx = 0,
+		.unused3 = 0,
+		.orig_video_lines = 25,
+		.orig_video_isVGA = VIDEO_TYPE_VGAC,
+		.orig_video_points = 16
+	};
+}
+#endif
+
+static void __init bonito_quirks_setup(void)
+{
+	char *argptr;
+
+	argptr = fw_getcmdline();
+	if (strstr(argptr, "debug")) {
+		BONITO_BONGENCFG |= BONITO_BONGENCFG_DEBUGMODE;
+		pr_info("Enabled Bonito debug mode\n");
+	} else
+		BONITO_BONGENCFG &= ~BONITO_BONGENCFG_DEBUGMODE;
+}
+
+void __init *plat_get_fdt(void)
+{
+	return (void *)__dtb_start;
+}
+
+void __init plat_mem_setup(void)
+{
+	unsigned int i;
+	void *fdt = plat_get_fdt();
+
+	fdt = malta_dt_shim(fdt);
+	__dt_setup_arch(fdt);
+
+	if (IS_ENABLED(CONFIG_EVA))
+		/* EVA has already been configured in mach-malta/kernel-init.h */
+		pr_info("Enhanced Virtual Addressing (EVA) activated\n");
+
+	mips_pcibios_init();
+
+	/* Request I/O space for devices used on the Malta board. */
+	for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
+		request_resource(&ioport_resource, standard_io_resources+i);
+
+	/*
+	 * Enable DMA channel 4 (cascade channel) in the PIIX4 south bridge.
+	 */
+	enable_dma(4);
+
+	if (mips_revision_sconid == MIPS_REVISION_SCON_BONITO)
+		bonito_quirks_setup();
+
+	plat_setup_iocoherency();
+
+	pci_clock_check();
+
+#ifdef CONFIG_BLK_DEV_FD
+	fd_activate();
+#endif
+
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
+	screen_info_setup();
+#endif
+}