diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-06 01:02:30 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-06 01:02:30 +0000 |
commit | 76cb841cb886eef6b3bee341a2266c76578724ad (patch) | |
tree | f5892e5ba6cc11949952a6ce4ecbe6d516d6ce58 /arch/mips/netlogic/common | |
parent | Initial commit. (diff) | |
download | linux-76cb841cb886eef6b3bee341a2266c76578724ad.tar.xz linux-76cb841cb886eef6b3bee341a2266c76578724ad.zip |
Adding upstream version 4.19.249.upstream/4.19.249
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/mips/netlogic/common')
-rw-r--r-- | arch/mips/netlogic/common/Makefile | 5 | ||||
-rw-r--r-- | arch/mips/netlogic/common/earlycons.c | 63 | ||||
-rw-r--r-- | arch/mips/netlogic/common/irq.c | 354 | ||||
-rw-r--r-- | arch/mips/netlogic/common/reset.S | 299 | ||||
-rw-r--r-- | arch/mips/netlogic/common/smp.c | 285 | ||||
-rw-r--r-- | arch/mips/netlogic/common/smpboot.S | 141 | ||||
-rw-r--r-- | arch/mips/netlogic/common/time.c | 110 |
7 files changed, 1257 insertions, 0 deletions
diff --git a/arch/mips/netlogic/common/Makefile b/arch/mips/netlogic/common/Makefile new file mode 100644 index 000000000..89f6e3f39 --- /dev/null +++ b/arch/mips/netlogic/common/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-y += irq.o time.o +obj-y += reset.o +obj-$(CONFIG_SMP) += smp.o smpboot.o +obj-$(CONFIG_EARLY_PRINTK) += earlycons.o diff --git a/arch/mips/netlogic/common/earlycons.c b/arch/mips/netlogic/common/earlycons.c new file mode 100644 index 000000000..8f5bc1597 --- /dev/null +++ b/arch/mips/netlogic/common/earlycons.c @@ -0,0 +1,63 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/types.h> +#include <linux/serial_reg.h> + +#include <asm/mipsregs.h> +#include <asm/setup.h> +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/common.h> + +#if defined(CONFIG_CPU_XLP) +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/uart.h> +#elif defined(CONFIG_CPU_XLR) +#include <asm/netlogic/xlr/iomap.h> +#endif + +void prom_putchar(char c) +{ + uint64_t uartbase; + +#if defined(CONFIG_CPU_XLP) + uartbase = nlm_get_uart_regbase(0, 0); +#elif defined(CONFIG_CPU_XLR) + uartbase = nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET); +#endif + while ((nlm_read_reg(uartbase, UART_LSR) & UART_LSR_THRE) == 0) + ; + nlm_write_reg(uartbase, UART_TX, c); +} diff --git a/arch/mips/netlogic/common/irq.c b/arch/mips/netlogic/common/irq.c new file mode 100644 index 000000000..f4961bc9a --- /dev/null +++ b/arch/mips/netlogic/common/irq.c @@ -0,0 +1,354 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/linkage.h> +#include <linux/interrupt.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/irq.h> + +#include <linux/irqdomain.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> + +#include <asm/errno.h> +#include <asm/signal.h> +#include <asm/ptrace.h> +#include <asm/mipsregs.h> +#include <asm/thread_info.h> + +#include <asm/netlogic/mips-extns.h> +#include <asm/netlogic/interrupt.h> +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/common.h> + +#if defined(CONFIG_CPU_XLP) +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/pic.h> +#elif defined(CONFIG_CPU_XLR) +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/pic.h> +#include <asm/netlogic/xlr/fmn.h> +#else +#error "Unknown CPU" +#endif + +#ifdef CONFIG_SMP +#define SMP_IRQ_MASK ((1ULL << IRQ_IPI_SMP_FUNCTION) | \ + (1ULL << IRQ_IPI_SMP_RESCHEDULE)) +#else +#define SMP_IRQ_MASK 0 +#endif +#define PERCPU_IRQ_MASK (SMP_IRQ_MASK | (1ull << IRQ_TIMER) | \ + (1ull << IRQ_FMN)) + +struct nlm_pic_irq { + void (*extra_ack)(struct irq_data *); + struct nlm_soc_info *node; + int picirq; + int irt; + int flags; +}; + +static void xlp_pic_enable(struct irq_data *d) +{ + unsigned long flags; + struct nlm_pic_irq *pd = irq_data_get_irq_chip_data(d); + + BUG_ON(!pd); + spin_lock_irqsave(&pd->node->piclock, flags); + nlm_pic_enable_irt(pd->node->picbase, pd->irt); + spin_unlock_irqrestore(&pd->node->piclock, flags); +} + +static void xlp_pic_disable(struct irq_data *d) +{ + struct nlm_pic_irq *pd = irq_data_get_irq_chip_data(d); + unsigned long flags; + + BUG_ON(!pd); + spin_lock_irqsave(&pd->node->piclock, flags); + nlm_pic_disable_irt(pd->node->picbase, pd->irt); + spin_unlock_irqrestore(&pd->node->piclock, flags); +} + +static void xlp_pic_mask_ack(struct irq_data *d) +{ + struct nlm_pic_irq *pd = irq_data_get_irq_chip_data(d); + + clear_c0_eimr(pd->picirq); + ack_c0_eirr(pd->picirq); +} + +static void xlp_pic_unmask(struct irq_data *d) +{ + struct nlm_pic_irq *pd = irq_data_get_irq_chip_data(d); + + BUG_ON(!pd); + + if (pd->extra_ack) + pd->extra_ack(d); + + /* re-enable the intr on this cpu */ + set_c0_eimr(pd->picirq); + + /* Ack is a single write, no need to lock */ + nlm_pic_ack(pd->node->picbase, pd->irt); +} + +static struct irq_chip xlp_pic = { + .name = "XLP-PIC", + .irq_enable = xlp_pic_enable, + .irq_disable = xlp_pic_disable, + .irq_mask_ack = xlp_pic_mask_ack, + .irq_unmask = xlp_pic_unmask, +}; + +static void cpuintr_disable(struct irq_data *d) +{ + clear_c0_eimr(d->irq); +} + +static void cpuintr_enable(struct irq_data *d) +{ + set_c0_eimr(d->irq); +} + +static void cpuintr_ack(struct irq_data *d) +{ + ack_c0_eirr(d->irq); +} + +/* + * Chip definition for CPU originated interrupts(timer, msg) and + * IPIs + */ +struct irq_chip nlm_cpu_intr = { + .name = "XLP-CPU-INTR", + .irq_enable = cpuintr_enable, + .irq_disable = cpuintr_disable, + .irq_mask = cpuintr_disable, + .irq_ack = cpuintr_ack, + .irq_eoi = cpuintr_enable, +}; + +static void __init nlm_init_percpu_irqs(void) +{ + int i; + + for (i = 0; i < PIC_IRT_FIRST_IRQ; i++) + irq_set_chip_and_handler(i, &nlm_cpu_intr, handle_percpu_irq); +#ifdef CONFIG_SMP + irq_set_chip_and_handler(IRQ_IPI_SMP_FUNCTION, &nlm_cpu_intr, + nlm_smp_function_ipi_handler); + irq_set_chip_and_handler(IRQ_IPI_SMP_RESCHEDULE, &nlm_cpu_intr, + nlm_smp_resched_ipi_handler); +#endif +} + + +void nlm_setup_pic_irq(int node, int picirq, int irq, int irt) +{ + struct nlm_pic_irq *pic_data; + int xirq; + + xirq = nlm_irq_to_xirq(node, irq); + pic_data = kzalloc(sizeof(*pic_data), GFP_KERNEL); + BUG_ON(pic_data == NULL); + pic_data->irt = irt; + pic_data->picirq = picirq; + pic_data->node = nlm_get_node(node); + irq_set_chip_and_handler(xirq, &xlp_pic, handle_level_irq); + irq_set_chip_data(xirq, pic_data); +} + +void nlm_set_pic_extra_ack(int node, int irq, void (*xack)(struct irq_data *)) +{ + struct nlm_pic_irq *pic_data; + int xirq; + + xirq = nlm_irq_to_xirq(node, irq); + pic_data = irq_get_chip_data(xirq); + if (WARN_ON(!pic_data)) + return; + pic_data->extra_ack = xack; +} + +static void nlm_init_node_irqs(int node) +{ + struct nlm_soc_info *nodep; + int i, irt; + + pr_info("Init IRQ for node %d\n", node); + nodep = nlm_get_node(node); + nodep->irqmask = PERCPU_IRQ_MASK; + for (i = PIC_IRT_FIRST_IRQ; i <= PIC_IRT_LAST_IRQ; i++) { + irt = nlm_irq_to_irt(i); + if (irt == -1) /* unused irq */ + continue; + nodep->irqmask |= 1ull << i; + if (irt == -2) /* not a direct PIC irq */ + continue; + + nlm_pic_init_irt(nodep->picbase, irt, i, + node * nlm_threads_per_node(), 0); + nlm_setup_pic_irq(node, i, i, irt); + } +} + +void nlm_smp_irq_init(int hwtid) +{ + int cpu, node; + + cpu = hwtid % nlm_threads_per_node(); + node = hwtid / nlm_threads_per_node(); + + if (cpu == 0 && node != 0) + nlm_init_node_irqs(node); + write_c0_eimr(nlm_get_node(node)->irqmask); +} + +asmlinkage void plat_irq_dispatch(void) +{ + uint64_t eirr; + int i, node; + + node = nlm_nodeid(); + eirr = read_c0_eirr_and_eimr(); + if (eirr == 0) + return; + + i = __ffs64(eirr); + /* per-CPU IRQs don't need translation */ + if (i < PIC_IRQ_BASE) { + do_IRQ(i); + return; + } + +#if defined(CONFIG_PCI_MSI) && defined(CONFIG_CPU_XLP) + /* PCI interrupts need a second level dispatch for MSI bits */ + if (i >= PIC_PCIE_LINK_MSI_IRQ(0) && i <= PIC_PCIE_LINK_MSI_IRQ(3)) { + nlm_dispatch_msi(node, i); + return; + } + if (i >= PIC_PCIE_MSIX_IRQ(0) && i <= PIC_PCIE_MSIX_IRQ(3)) { + nlm_dispatch_msix(node, i); + return; + } + +#endif + /* top level irq handling */ + do_IRQ(nlm_irq_to_xirq(node, i)); +} + +#ifdef CONFIG_CPU_XLP +static const struct irq_domain_ops xlp_pic_irq_domain_ops = { + .xlate = irq_domain_xlate_onetwocell, +}; + +static int __init xlp_of_pic_init(struct device_node *node, + struct device_node *parent) +{ + const int n_picirqs = PIC_IRT_LAST_IRQ - PIC_IRQ_BASE + 1; + struct irq_domain *xlp_pic_domain; + struct resource res; + int socid, ret, bus; + + /* we need a hack to get the PIC's SoC chip id */ + ret = of_address_to_resource(node, 0, &res); + if (ret < 0) { + pr_err("PIC %s: reg property not found!\n", node->name); + return -EINVAL; + } + + if (cpu_is_xlp9xx()) { + bus = (res.start >> 20) & 0xf; + for (socid = 0; socid < NLM_NR_NODES; socid++) { + if (!nlm_node_present(socid)) + continue; + if (nlm_get_node(socid)->socbus == bus) + break; + } + if (socid == NLM_NR_NODES) { + pr_err("PIC %s: Node mapping for bus %d not found!\n", + node->name, bus); + return -EINVAL; + } + } else { + socid = (res.start >> 18) & 0x3; + if (!nlm_node_present(socid)) { + pr_err("PIC %s: node %d does not exist!\n", + node->name, socid); + return -EINVAL; + } + } + + if (!nlm_node_present(socid)) { + pr_err("PIC %s: node %d does not exist!\n", node->name, socid); + return -EINVAL; + } + + xlp_pic_domain = irq_domain_add_legacy(node, n_picirqs, + nlm_irq_to_xirq(socid, PIC_IRQ_BASE), PIC_IRQ_BASE, + &xlp_pic_irq_domain_ops, NULL); + if (xlp_pic_domain == NULL) { + pr_err("PIC %s: Creating legacy domain failed!\n", node->name); + return -EINVAL; + } + pr_info("Node %d: IRQ domain created for PIC@%pR\n", socid, &res); + return 0; +} + +static struct of_device_id __initdata xlp_pic_irq_ids[] = { + { .compatible = "netlogic,xlp-pic", .data = xlp_of_pic_init }, + {}, +}; +#endif + +void __init arch_init_irq(void) +{ + /* Initialize the irq descriptors */ + nlm_init_percpu_irqs(); + nlm_init_node_irqs(0); + write_c0_eimr(nlm_current_node()->irqmask); +#if defined(CONFIG_CPU_XLR) + nlm_setup_fmn_irq(); +#endif +#ifdef CONFIG_CPU_XLP + of_irq_init(xlp_pic_irq_ids); +#endif +} diff --git a/arch/mips/netlogic/common/reset.S b/arch/mips/netlogic/common/reset.S new file mode 100644 index 000000000..c474981a6 --- /dev/null +++ b/arch/mips/netlogic/common/reset.S @@ -0,0 +1,299 @@ +/* + * Copyright 2003-2013 Broadcom Corporation. + * All Rights Reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the Broadcom + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +#include <asm/asm.h> +#include <asm/asm-offsets.h> +#include <asm/cpu.h> +#include <asm/cacheops.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/stackframe.h> +#include <asm/asmmacro.h> +#include <asm/addrspace.h> + +#include <asm/netlogic/common.h> + +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/sys.h> +#include <asm/netlogic/xlp-hal/cpucontrol.h> + +#define SYS_CPU_COHERENT_BASE CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \ + XLP_IO_SYS_OFFSET(0) + XLP_IO_PCI_HDRSZ + \ + SYS_CPU_NONCOHERENT_MODE * 4 + +/* Enable XLP features and workarounds in the LSU */ +.macro xlp_config_lsu + li t0, LSU_DEFEATURE + mfcr t1, t0 + + lui t2, 0x4080 /* Enable Unaligned Access, L2HPE */ + or t1, t1, t2 + mtcr t1, t0 + + li t0, ICU_DEFEATURE + mfcr t1, t0 + ori t1, 0x1000 /* Enable Icache partitioning */ + mtcr t1, t0 + + li t0, SCHED_DEFEATURE + lui t1, 0x0100 /* Disable BRU accepting ALU ops */ + mtcr t1, t0 +.endm + +/* + * Allow access to physical mem >64G by enabling ELPA in PAGEGRAIN + * register. This is needed before going to C code since the SP can + * in this region. Called from all HW threads. + */ +.macro xlp_early_mmu_init + mfc0 t0, CP0_PAGEMASK, 1 + li t1, (1 << 29) /* ELPA bit */ + or t0, t1 + mtc0 t0, CP0_PAGEMASK, 1 +.endm + +/* + * L1D cache has to be flushed before enabling threads in XLP. + * On XLP8xx/XLP3xx, we do a low level flush using processor control + * registers. On XLPII CPUs, usual cache instructions work. + */ +.macro xlp_flush_l1_dcache + mfc0 t0, CP0_PRID + andi t0, t0, PRID_IMP_MASK + slt t1, t0, 0x1200 + beqz t1, 15f + nop + + /* XLP8xx low level cache flush */ + li t0, LSU_DEBUG_DATA0 + li t1, LSU_DEBUG_ADDR + li t2, 0 /* index */ + li t3, 0x1000 /* loop count */ +11: + sll v0, t2, 5 + mtcr zero, t0 + ori v1, v0, 0x3 /* way0 | write_enable | write_active */ + mtcr v1, t1 +12: + mfcr v1, t1 + andi v1, 0x1 /* wait for write_active == 0 */ + bnez v1, 12b + nop + mtcr zero, t0 + ori v1, v0, 0x7 /* way1 | write_enable | write_active */ + mtcr v1, t1 +13: + mfcr v1, t1 + andi v1, 0x1 /* wait for write_active == 0 */ + bnez v1, 13b + nop + addi t2, 1 + bne t3, t2, 11b + nop + b 17f + nop + + /* XLPII CPUs, Invalidate all 64k of L1 D-cache */ +15: + li t0, 0x80000000 + li t1, 0x80010000 +16: cache Index_Writeback_Inv_D, 0(t0) + addiu t0, t0, 32 + bne t0, t1, 16b + nop +17: +.endm + +/* + * nlm_reset_entry will be copied to the reset entry point for + * XLR and XLP. The XLP cores start here when they are woken up. This + * is also the NMI entry point. + * + * We use scratch reg 6/7 to save k0/k1 and check for NMI first. + * + * The data corresponding to reset/NMI is stored at RESET_DATA_PHYS + * location, this will have the thread mask (used when core is woken up) + * and the current NMI handler in case we reached here for an NMI. + * + * When a core or thread is newly woken up, it marks itself ready and + * loops in a 'wait'. When the CPU really needs waking up, we send an NMI + * IPI to it, with the NMI handler set to prom_boot_secondary_cpus + */ + .set noreorder + .set noat + .set arch=xlr /* for mfcr/mtcr, XLR is sufficient */ + +FEXPORT(nlm_reset_entry) + dmtc0 k0, $22, 6 + dmtc0 k1, $22, 7 + mfc0 k0, CP0_STATUS + li k1, 0x80000 + and k1, k0, k1 + beqz k1, 1f /* go to real reset entry */ + nop + li k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */ + ld k0, BOOT_NMI_HANDLER(k1) + jr k0 + nop + +1: /* Entry point on core wakeup */ + mfc0 t0, CP0_PRID /* processor ID */ + andi t0, PRID_IMP_MASK + li t1, 0x1500 /* XLP 9xx */ + beq t0, t1, 2f /* does not need to set coherent */ + nop + + li t1, 0x1300 /* XLP 5xx */ + beq t0, t1, 2f /* does not need to set coherent */ + nop + + /* set bit in SYS coherent register for the core */ + mfc0 t0, CP0_EBASE + mfc0 t1, CP0_EBASE + srl t1, 5 + andi t1, 0x3 /* t1 <- node */ + li t2, 0x40000 + mul t3, t2, t1 /* t3 = node * 0x40000 */ + srl t0, t0, 2 + and t0, t0, 0x7 /* t0 <- core */ + li t1, 0x1 + sll t0, t1, t0 + nor t0, t0, zero /* t0 <- ~(1 << core) */ + li t2, SYS_CPU_COHERENT_BASE + add t2, t2, t3 /* t2 <- SYS offset for node */ + lw t1, 0(t2) + and t1, t1, t0 + sw t1, 0(t2) + + /* read back to ensure complete */ + lw t1, 0(t2) + sync + +2: + /* Configure LSU on Non-0 Cores. */ + xlp_config_lsu + /* FALL THROUGH */ + +/* + * Wake up sibling threads from the initial thread in a core. + */ +EXPORT(nlm_boot_siblings) + /* core L1D flush before enable threads */ + xlp_flush_l1_dcache + /* save ra and sp, will be used later (only for boot cpu) */ + dmtc0 ra, $22, 6 + dmtc0 sp, $22, 7 + /* Enable hw threads by writing to MAP_THREADMODE of the core */ + li t0, CKSEG1ADDR(RESET_DATA_PHYS) + lw t1, BOOT_THREAD_MODE(t0) /* t1 <- thread mode */ + li t0, ((CPU_BLOCKID_MAP << 8) | MAP_THREADMODE) + mfcr t2, t0 + or t2, t2, t1 + mtcr t2, t0 + + /* + * The new hardware thread starts at the next instruction + * For all the cases other than core 0 thread 0, we will + * jump to the secondary wait function. + + * NOTE: All GPR contents are lost after the mtcr above! + */ + mfc0 v0, CP0_EBASE + andi v0, 0x3ff /* v0 <- node/core */ + + /* + * Errata: to avoid potential live lock, setup IFU_BRUB_RESERVE + * when running 4 threads per core + */ + andi v1, v0, 0x3 /* v1 <- thread id */ + bnez v1, 2f + nop + + /* thread 0 of each core. */ + li t0, CKSEG1ADDR(RESET_DATA_PHYS) + lw t1, BOOT_THREAD_MODE(t0) /* t1 <- thread mode */ + subu t1, 0x3 /* 4-thread per core mode? */ + bnez t1, 2f + nop + + li t0, IFU_BRUB_RESERVE + li t1, 0x55 + mtcr t1, t0 + _ehb +2: + beqz v0, 4f /* boot cpu (cpuid == 0)? */ + nop + + /* setup status reg */ + move t1, zero +#ifdef CONFIG_64BIT + ori t1, ST0_KX +#endif + mtc0 t1, CP0_STATUS + + xlp_early_mmu_init + + /* mark CPU ready */ + li t3, CKSEG1ADDR(RESET_DATA_PHYS) + ADDIU t1, t3, BOOT_CPU_READY + sll v1, v0, 2 + PTR_ADDU t1, v1 + li t2, 1 + sw t2, 0(t1) + /* Wait until NMI hits */ +3: wait + b 3b + nop + + /* + * For the boot CPU, we have to restore ra and sp and return, rest + * of the registers will be restored by the caller + */ +4: + dmfc0 ra, $22, 6 + dmfc0 sp, $22, 7 + jr ra + nop +EXPORT(nlm_reset_entry_end) + +LEAF(nlm_init_boot_cpu) +#ifdef CONFIG_CPU_XLP + xlp_config_lsu + xlp_early_mmu_init +#endif + jr ra + nop +END(nlm_init_boot_cpu) diff --git a/arch/mips/netlogic/common/smp.c b/arch/mips/netlogic/common/smp.c new file mode 100644 index 000000000..39a300bd6 --- /dev/null +++ b/arch/mips/netlogic/common/smp.c @@ -0,0 +1,285 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/sched/task_stack.h> +#include <linux/smp.h> +#include <linux/irq.h> + +#include <asm/mmu_context.h> + +#include <asm/netlogic/interrupt.h> +#include <asm/netlogic/mips-extns.h> +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/common.h> + +#if defined(CONFIG_CPU_XLP) +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/pic.h> +#elif defined(CONFIG_CPU_XLR) +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/pic.h> +#include <asm/netlogic/xlr/xlr.h> +#else +#error "Unknown CPU" +#endif + +void nlm_send_ipi_single(int logical_cpu, unsigned int action) +{ + unsigned int hwtid; + uint64_t picbase; + + /* node id is part of hwtid, and needed for send_ipi */ + hwtid = cpu_logical_map(logical_cpu); + picbase = nlm_get_node(nlm_hwtid_to_node(hwtid))->picbase; + + if (action & SMP_CALL_FUNCTION) + nlm_pic_send_ipi(picbase, hwtid, IRQ_IPI_SMP_FUNCTION, 0); + if (action & SMP_RESCHEDULE_YOURSELF) + nlm_pic_send_ipi(picbase, hwtid, IRQ_IPI_SMP_RESCHEDULE, 0); +} + +void nlm_send_ipi_mask(const struct cpumask *mask, unsigned int action) +{ + int cpu; + + for_each_cpu(cpu, mask) { + nlm_send_ipi_single(cpu, action); + } +} + +/* IRQ_IPI_SMP_FUNCTION Handler */ +void nlm_smp_function_ipi_handler(struct irq_desc *desc) +{ + unsigned int irq = irq_desc_get_irq(desc); + clear_c0_eimr(irq); + ack_c0_eirr(irq); + generic_smp_call_function_interrupt(); + set_c0_eimr(irq); +} + +/* IRQ_IPI_SMP_RESCHEDULE handler */ +void nlm_smp_resched_ipi_handler(struct irq_desc *desc) +{ + unsigned int irq = irq_desc_get_irq(desc); + clear_c0_eimr(irq); + ack_c0_eirr(irq); + scheduler_ipi(); + set_c0_eimr(irq); +} + +/* + * Called before going into mips code, early cpu init + */ +void nlm_early_init_secondary(int cpu) +{ + change_c0_config(CONF_CM_CMASK, 0x3); +#ifdef CONFIG_CPU_XLP + xlp_mmu_init(); +#endif + write_c0_ebase(nlm_current_node()->ebase); +} + +/* + * Code to run on secondary just after probing the CPU + */ +static void nlm_init_secondary(void) +{ + int hwtid; + + hwtid = hard_smp_processor_id(); + cpu_set_core(¤t_cpu_data, hwtid / NLM_THREADS_PER_CORE); + current_cpu_data.package = nlm_nodeid(); + nlm_percpu_init(hwtid); + nlm_smp_irq_init(hwtid); +} + +void nlm_prepare_cpus(unsigned int max_cpus) +{ + /* declare we are SMT capable */ + smp_num_siblings = nlm_threads_per_core; +} + +void nlm_smp_finish(void) +{ + local_irq_enable(); +} + +/* + * Boot all other cpus in the system, initialize them, and bring them into + * the boot function + */ +unsigned long nlm_next_gp; +unsigned long nlm_next_sp; +static cpumask_t phys_cpu_present_mask; + +int nlm_boot_secondary(int logical_cpu, struct task_struct *idle) +{ + uint64_t picbase; + int hwtid; + + hwtid = cpu_logical_map(logical_cpu); + picbase = nlm_get_node(nlm_hwtid_to_node(hwtid))->picbase; + + nlm_next_sp = (unsigned long)__KSTK_TOS(idle); + nlm_next_gp = (unsigned long)task_thread_info(idle); + + /* barrier for sp/gp store above */ + __sync(); + nlm_pic_send_ipi(picbase, hwtid, 1, 1); /* NMI */ + + return 0; +} + +void __init nlm_smp_setup(void) +{ + unsigned int boot_cpu; + int num_cpus, i, ncore, node; + volatile u32 *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY); + + boot_cpu = hard_smp_processor_id(); + cpumask_clear(&phys_cpu_present_mask); + + cpumask_set_cpu(boot_cpu, &phys_cpu_present_mask); + __cpu_number_map[boot_cpu] = 0; + __cpu_logical_map[0] = boot_cpu; + set_cpu_possible(0, true); + + num_cpus = 1; + for (i = 0; i < NR_CPUS; i++) { + /* + * cpu_ready array is not set for the boot_cpu, + * it is only set for ASPs (see smpboot.S) + */ + if (cpu_ready[i]) { + cpumask_set_cpu(i, &phys_cpu_present_mask); + __cpu_number_map[i] = num_cpus; + __cpu_logical_map[num_cpus] = i; + set_cpu_possible(num_cpus, true); + node = nlm_hwtid_to_node(i); + cpumask_set_cpu(num_cpus, &nlm_get_node(node)->cpumask); + ++num_cpus; + } + } + + pr_info("Physical CPU mask: %*pb\n", + cpumask_pr_args(&phys_cpu_present_mask)); + pr_info("Possible CPU mask: %*pb\n", + cpumask_pr_args(cpu_possible_mask)); + + /* check with the cores we have woken up */ + for (ncore = 0, i = 0; i < NLM_NR_NODES; i++) + ncore += hweight32(nlm_get_node(i)->coremask); + + pr_info("Detected (%dc%dt) %d Slave CPU(s)\n", ncore, + nlm_threads_per_core, num_cpus); + + /* switch NMI handler to boot CPUs */ + nlm_set_nmi_handler(nlm_boot_secondary_cpus); +} + +static int nlm_parse_cpumask(cpumask_t *wakeup_mask) +{ + uint32_t core0_thr_mask, core_thr_mask; + int threadmode, i, j; + + core0_thr_mask = 0; + for (i = 0; i < NLM_THREADS_PER_CORE; i++) + if (cpumask_test_cpu(i, wakeup_mask)) + core0_thr_mask |= (1 << i); + switch (core0_thr_mask) { + case 1: + nlm_threads_per_core = 1; + threadmode = 0; + break; + case 3: + nlm_threads_per_core = 2; + threadmode = 2; + break; + case 0xf: + nlm_threads_per_core = 4; + threadmode = 3; + break; + default: + goto unsupp; + } + + /* Verify other cores CPU masks */ + for (i = 0; i < NR_CPUS; i += NLM_THREADS_PER_CORE) { + core_thr_mask = 0; + for (j = 0; j < NLM_THREADS_PER_CORE; j++) + if (cpumask_test_cpu(i + j, wakeup_mask)) + core_thr_mask |= (1 << j); + if (core_thr_mask != 0 && core_thr_mask != core0_thr_mask) + goto unsupp; + } + return threadmode; + +unsupp: + panic("Unsupported CPU mask %*pb", cpumask_pr_args(wakeup_mask)); + return 0; +} + +int nlm_wakeup_secondary_cpus(void) +{ + u32 *reset_data; + int threadmode; + + /* verify the mask and setup core config variables */ + threadmode = nlm_parse_cpumask(&nlm_cpumask); + + /* Setup CPU init parameters */ + reset_data = nlm_get_boot_data(BOOT_THREAD_MODE); + *reset_data = threadmode; + +#ifdef CONFIG_CPU_XLP + xlp_wakeup_secondary_cpus(); +#else + xlr_wakeup_secondary_cpus(); +#endif + return 0; +} + +const struct plat_smp_ops nlm_smp_ops = { + .send_ipi_single = nlm_send_ipi_single, + .send_ipi_mask = nlm_send_ipi_mask, + .init_secondary = nlm_init_secondary, + .smp_finish = nlm_smp_finish, + .boot_secondary = nlm_boot_secondary, + .smp_setup = nlm_smp_setup, + .prepare_cpus = nlm_prepare_cpus, +}; diff --git a/arch/mips/netlogic/common/smpboot.S b/arch/mips/netlogic/common/smpboot.S new file mode 100644 index 000000000..509c1a7e7 --- /dev/null +++ b/arch/mips/netlogic/common/smpboot.S @@ -0,0 +1,141 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +#include <asm/asm.h> +#include <asm/asm-offsets.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/stackframe.h> +#include <asm/asmmacro.h> +#include <asm/addrspace.h> + +#include <asm/netlogic/common.h> + +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/sys.h> +#include <asm/netlogic/xlp-hal/cpucontrol.h> + + .set noreorder + .set noat + .set arch=xlr /* for mfcr/mtcr, XLR is sufficient */ + +/* Called by the boot cpu to wake up its sibling threads */ +NESTED(xlp_boot_core0_siblings, PT_SIZE, sp) + /* CPU register contents lost when enabling threads, save them first */ + SAVE_ALL + sync + /* find the location to which nlm_boot_siblings was relocated */ + li t0, CKSEG1ADDR(RESET_VEC_PHYS) + PTR_LA t1, nlm_reset_entry + PTR_LA t2, nlm_boot_siblings + dsubu t2, t1 + daddu t2, t0 + /* call it */ + jalr t2 + nop + RESTORE_ALL + jr ra + nop +END(xlp_boot_core0_siblings) + +NESTED(nlm_boot_secondary_cpus, 16, sp) + /* Initialize CP0 Status */ + move t1, zero +#ifdef CONFIG_64BIT + ori t1, ST0_KX +#endif + mtc0 t1, CP0_STATUS + PTR_LA t1, nlm_next_sp + PTR_L sp, 0(t1) + PTR_LA t1, nlm_next_gp + PTR_L gp, 0(t1) + + /* a0 has the processor id */ + mfc0 a0, CP0_EBASE + andi a0, 0x3ff /* a0 <- node/core */ + PTR_LA t0, nlm_early_init_secondary + jalr t0 + nop + + PTR_LA t0, smp_bootstrap + jr t0 + nop +END(nlm_boot_secondary_cpus) + +/* + * In case of RMIboot bootloader which is used on XLR boards, the CPUs + * be already woken up and waiting in bootloader code. + * This will get them out of the bootloader code and into linux. Needed + * because the bootloader area will be taken and initialized by linux. + */ +NESTED(nlm_rmiboot_preboot, 16, sp) + mfc0 t0, $15, 1 /* read ebase */ + andi t0, 0x1f /* t0 has the processor_id() */ + andi t2, t0, 0x3 /* thread num */ + sll t0, 2 /* offset in cpu array */ + + li t3, CKSEG1ADDR(RESET_DATA_PHYS) + ADDIU t1, t3, BOOT_CPU_READY + ADDU t1, t0 + li t3, 1 + sw t3, 0(t1) + + bnez t2, 1f /* skip thread programming */ + nop /* for thread id != 0 */ + + /* + * XLR MMU setup only for first thread in core + */ + li t0, 0x400 + mfcr t1, t0 + li t2, 6 /* XLR thread mode mask */ + nor t3, t2, zero + and t2, t1, t2 /* t2 - current thread mode */ + li v0, CKSEG1ADDR(RESET_DATA_PHYS) + lw v1, BOOT_THREAD_MODE(v0) /* v1 - new thread mode */ + sll v1, 1 + beq v1, t2, 1f /* same as request value */ + nop /* nothing to do */ + + and t2, t1, t3 /* mask out old thread mode */ + or t1, t2, v1 /* put in new value */ + mtcr t1, t0 /* update core control */ + + /* wait for NMI to hit */ +1: wait + b 1b + nop +END(nlm_rmiboot_preboot) diff --git a/arch/mips/netlogic/common/time.c b/arch/mips/netlogic/common/time.c new file mode 100644 index 000000000..cbbf0d482 --- /dev/null +++ b/arch/mips/netlogic/common/time.c @@ -0,0 +1,110 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/init.h> + +#include <asm/time.h> +#include <asm/cpu-features.h> + +#include <asm/netlogic/interrupt.h> +#include <asm/netlogic/common.h> +#include <asm/netlogic/haldefs.h> + +#if defined(CONFIG_CPU_XLP) +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/sys.h> +#include <asm/netlogic/xlp-hal/pic.h> +#elif defined(CONFIG_CPU_XLR) +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/pic.h> +#include <asm/netlogic/xlr/xlr.h> +#else +#error "Unknown CPU" +#endif + +unsigned int get_c0_compare_int(void) +{ + return IRQ_TIMER; +} + +static u64 nlm_get_pic_timer(struct clocksource *cs) +{ + uint64_t picbase = nlm_get_node(0)->picbase; + + return ~nlm_pic_read_timer(picbase, PIC_CLOCK_TIMER); +} + +static u64 nlm_get_pic_timer32(struct clocksource *cs) +{ + uint64_t picbase = nlm_get_node(0)->picbase; + + return ~nlm_pic_read_timer32(picbase, PIC_CLOCK_TIMER); +} + +static struct clocksource csrc_pic = { + .name = "PIC", + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void nlm_init_pic_timer(void) +{ + uint64_t picbase = nlm_get_node(0)->picbase; + u32 picfreq; + + nlm_pic_set_timer(picbase, PIC_CLOCK_TIMER, ~0ULL, 0, 0); + if (current_cpu_data.cputype == CPU_XLR) { + csrc_pic.mask = CLOCKSOURCE_MASK(32); + csrc_pic.read = nlm_get_pic_timer32; + } else { + csrc_pic.mask = CLOCKSOURCE_MASK(64); + csrc_pic.read = nlm_get_pic_timer; + } + csrc_pic.rating = 1000; + picfreq = pic_timer_freq(); + clocksource_register_hz(&csrc_pic, picfreq); + pr_info("PIC clock source added, frequency %d\n", picfreq); +} + +void __init plat_time_init(void) +{ + nlm_init_pic_timer(); + mips_hpt_frequency = nlm_get_cpu_frequency(); + if (current_cpu_type() == CPU_XLR) + preset_lpj = mips_hpt_frequency / (3 * HZ); + else + preset_lpj = mips_hpt_frequency / (2 * HZ); + pr_info("MIPS counter frequency [%ld]\n", + (unsigned long)mips_hpt_frequency); +} |