Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1683 insertions, 0 deletions

diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
new file mode 100644
index 000000000..74628aca2
--- /dev/null
+++ b/arch/powerpc/kernel/pci-common.c
@@ -0,0 +1,1683 @@
+/*
+ * Contains common pci routines for ALL ppc platform
+ * (based on pci_32.c and pci_64.c)
+ *
+ * Port for PPC64 David Engebretsen, IBM Corp.
+ * Contains common pci routines for ppc64 platform, pSeries and iSeries brands.
+ *
+ * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
+ *   Rework, based on alpha PCI code.
+ *
+ * Common pmac/prep/chrp pci routines. -- Cort
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/mm.h>
+#include <linux/shmem_fs.h>
+#include <linux/list.h>
+#include <linux/syscalls.h>
+#include <linux/irq.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/vgaarb.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/byteorder.h>
+#include <asm/machdep.h>
+#include <asm/ppc-pci.h>
+#include <asm/eeh.h>
+
+#include "../../../drivers/pci/pci.h"
+
+/* hose_spinlock protects accesses to the the phb_bitmap. */
+static DEFINE_SPINLOCK(hose_spinlock);
+LIST_HEAD(hose_list);
+
+/* For dynamic PHB numbering on get_phb_number(): max number of PHBs. */
+#define MAX_PHBS 0x10000
+
+/*
+ * For dynamic PHB numbering: used/free PHBs tracking bitmap.
+ * Accesses to this bitmap should be protected by hose_spinlock.
+ */
+static DECLARE_BITMAP(phb_bitmap, MAX_PHBS);
+
+/* ISA Memory physical address */
+resource_size_t isa_mem_base;
+EXPORT_SYMBOL(isa_mem_base);
+
+
+static const struct dma_map_ops *pci_dma_ops = &dma_nommu_ops;
+
+void set_pci_dma_ops(const struct dma_map_ops *dma_ops)
+{
+	pci_dma_ops = dma_ops;
+}
+
+const struct dma_map_ops *get_pci_dma_ops(void)
+{
+	return pci_dma_ops;
+}
+EXPORT_SYMBOL(get_pci_dma_ops);
+
+/*
+ * This function should run under locking protection, specifically
+ * hose_spinlock.
+ */
+static int get_phb_number(struct device_node *dn)
+{
+	int ret, phb_id = -1;
+	u32 prop_32;
+	u64 prop;
+
+	/*
+	 * Try fixed PHB numbering first, by checking archs and reading
+	 * the respective device-tree properties. Firstly, try powernv by
+	 * reading "ibm,opal-phbid", only present in OPAL environment.
+	 */
+	ret = of_property_read_u64(dn, "ibm,opal-phbid", &prop);
+	if (ret) {
+		ret = of_property_read_u32_index(dn, "reg", 1, &prop_32);
+		prop = prop_32;
+	}
+
+	if (!ret)
+		phb_id = (int)(prop & (MAX_PHBS - 1));
+
+	/* We need to be sure to not use the same PHB number twice. */
+	if ((phb_id >= 0) && !test_and_set_bit(phb_id, phb_bitmap))
+		return phb_id;
+
+	/*
+	 * If not pseries nor powernv, or if fixed PHB numbering tried to add
+	 * the same PHB number twice, then fallback to dynamic PHB numbering.
+	 */
+	phb_id = find_first_zero_bit(phb_bitmap, MAX_PHBS);
+	BUG_ON(phb_id >= MAX_PHBS);
+	set_bit(phb_id, phb_bitmap);
+
+	return phb_id;
+}
+
+struct pci_controller *pcibios_alloc_controller(struct device_node *dev)
+{
+	struct pci_controller *phb;
+
+	phb = zalloc_maybe_bootmem(sizeof(struct pci_controller), GFP_KERNEL);
+	if (phb == NULL)
+		return NULL;
+	spin_lock(&hose_spinlock);
+	phb->global_number = get_phb_number(dev);
+	list_add_tail(&phb->list_node, &hose_list);
+	spin_unlock(&hose_spinlock);
+	phb->dn = dev;
+	phb->is_dynamic = slab_is_available();
+#ifdef CONFIG_PPC64
+	if (dev) {
+		int nid = of_node_to_nid(dev);
+
+		if (nid < 0 || !node_online(nid))
+			nid = -1;
+
+		PHB_SET_NODE(phb, nid);
+	}
+#endif
+	return phb;
+}
+EXPORT_SYMBOL_GPL(pcibios_alloc_controller);
+
+void pcibios_free_controller(struct pci_controller *phb)
+{
+	spin_lock(&hose_spinlock);
+
+	/* Clear bit of phb_bitmap to allow reuse of this PHB number. */
+	if (phb->global_number < MAX_PHBS)
+		clear_bit(phb->global_number, phb_bitmap);
+
+	list_del(&phb->list_node);
+	spin_unlock(&hose_spinlock);
+
+	if (phb->is_dynamic)
+		kfree(phb);
+}
+EXPORT_SYMBOL_GPL(pcibios_free_controller);
+
+/*
+ * This function is used to call pcibios_free_controller()
+ * in a deferred manner: a callback from the PCI subsystem.
+ *
+ * _*DO NOT*_ call pcibios_free_controller() explicitly if
+ * this is used (or it may access an invalid *phb pointer).
+ *
+ * The callback occurs when all references to the root bus
+ * are dropped (e.g., child buses/devices and their users).
+ *
+ * It's called as .release_fn() of 'struct pci_host_bridge'
+ * which is associated with the 'struct pci_controller.bus'
+ * (root bus) - it expects .release_data to hold a pointer
+ * to 'struct pci_controller'.
+ *
+ * In order to use it, register .release_fn()/release_data
+ * like this:
+ *
+ * pci_set_host_bridge_release(bridge,
+ *                             pcibios_free_controller_deferred
+ *                             (void *) phb);
+ *
+ * e.g. in the pcibios_root_bridge_prepare() callback from
+ * pci_create_root_bus().
+ */
+void pcibios_free_controller_deferred(struct pci_host_bridge *bridge)
+{
+	struct pci_controller *phb = (struct pci_controller *)
+					 bridge->release_data;
+
+	pr_debug("domain %d, dynamic %d\n", phb->global_number, phb->is_dynamic);
+
+	pcibios_free_controller(phb);
+}
+EXPORT_SYMBOL_GPL(pcibios_free_controller_deferred);
+
+/*
+ * The function is used to return the minimal alignment
+ * for memory or I/O windows of the associated P2P bridge.
+ * By default, 4KiB alignment for I/O windows and 1MiB for
+ * memory windows.
+ */
+resource_size_t pcibios_window_alignment(struct pci_bus *bus,
+					 unsigned long type)
+{
+	struct pci_controller *phb = pci_bus_to_host(bus);
+
+	if (phb->controller_ops.window_alignment)
+		return phb->controller_ops.window_alignment(bus, type);
+
+	/*
+	 * PCI core will figure out the default
+	 * alignment: 4KiB for I/O and 1MiB for
+	 * memory window.
+	 */
+	return 1;
+}
+
+void pcibios_setup_bridge(struct pci_bus *bus, unsigned long type)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+
+	if (hose->controller_ops.setup_bridge)
+		hose->controller_ops.setup_bridge(bus, type);
+}
+
+void pcibios_reset_secondary_bus(struct pci_dev *dev)
+{
+	struct pci_controller *phb = pci_bus_to_host(dev->bus);
+
+	if (phb->controller_ops.reset_secondary_bus) {
+		phb->controller_ops.reset_secondary_bus(dev);
+		return;
+	}
+
+	pci_reset_secondary_bus(dev);
+}
+
+resource_size_t pcibios_default_alignment(void)
+{
+	if (ppc_md.pcibios_default_alignment)
+		return ppc_md.pcibios_default_alignment();
+
+	return 0;
+}
+
+#ifdef CONFIG_PCI_IOV
+resource_size_t pcibios_iov_resource_alignment(struct pci_dev *pdev, int resno)
+{
+	if (ppc_md.pcibios_iov_resource_alignment)
+		return ppc_md.pcibios_iov_resource_alignment(pdev, resno);
+
+	return pci_iov_resource_size(pdev, resno);
+}
+
+int pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
+{
+	if (ppc_md.pcibios_sriov_enable)
+		return ppc_md.pcibios_sriov_enable(pdev, num_vfs);
+
+	return 0;
+}
+
+int pcibios_sriov_disable(struct pci_dev *pdev)
+{
+	if (ppc_md.pcibios_sriov_disable)
+		return ppc_md.pcibios_sriov_disable(pdev);
+
+	return 0;
+}
+
+#endif /* CONFIG_PCI_IOV */
+
+void pcibios_bus_add_device(struct pci_dev *pdev)
+{
+	if (ppc_md.pcibios_bus_add_device)
+		ppc_md.pcibios_bus_add_device(pdev);
+}
+
+static resource_size_t pcibios_io_size(const struct pci_controller *hose)
+{
+#ifdef CONFIG_PPC64
+	return hose->pci_io_size;
+#else
+	return resource_size(&hose->io_resource);
+#endif
+}
+
+int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+	int ret = 0;
+	struct pci_controller *hose;
+	resource_size_t size;
+
+	spin_lock(&hose_spinlock);
+	list_for_each_entry(hose, &hose_list, list_node) {
+		size = pcibios_io_size(hose);
+		if (address >= hose->io_base_virt &&
+		    address < (hose->io_base_virt + size)) {
+			ret = 1;
+			break;
+		}
+	}
+	spin_unlock(&hose_spinlock);
+	return ret;
+}
+
+unsigned long pci_address_to_pio(phys_addr_t address)
+{
+	struct pci_controller *hose;
+	resource_size_t size;
+	unsigned long ret = ~0;
+
+	spin_lock(&hose_spinlock);
+	list_for_each_entry(hose, &hose_list, list_node) {
+		size = pcibios_io_size(hose);
+		if (address >= hose->io_base_phys &&
+		    address < (hose->io_base_phys + size)) {
+			unsigned long base =
+				(unsigned long)hose->io_base_virt - _IO_BASE;
+			ret = base + (address - hose->io_base_phys);
+			break;
+		}
+	}
+	spin_unlock(&hose_spinlock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_address_to_pio);
+
+/*
+ * Return the domain number for this bus.
+ */
+int pci_domain_nr(struct pci_bus *bus)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+
+	return hose->global_number;
+}
+EXPORT_SYMBOL(pci_domain_nr);
+
+/* This routine is meant to be used early during boot, when the
+ * PCI bus numbers have not yet been assigned, and you need to
+ * issue PCI config cycles to an OF device.
+ * It could also be used to "fix" RTAS config cycles if you want
+ * to set pci_assign_all_buses to 1 and still use RTAS for PCI
+ * config cycles.
+ */
+struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node)
+{
+	while(node) {
+		struct pci_controller *hose, *tmp;
+		list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
+			if (hose->dn == node)
+				return hose;
+		node = node->parent;
+	}
+	return NULL;
+}
+
+/*
+ * Reads the interrupt pin to determine if interrupt is use by card.
+ * If the interrupt is used, then gets the interrupt line from the
+ * openfirmware and sets it in the pci_dev and pci_config line.
+ */
+static int pci_read_irq_line(struct pci_dev *pci_dev)
+{
+	int virq;
+
+	pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev));
+
+	/* Try to get a mapping from the device-tree */
+	virq = of_irq_parse_and_map_pci(pci_dev, 0, 0);
+	if (virq <= 0) {
+		u8 line, pin;
+
+		/* If that fails, lets fallback to what is in the config
+		 * space and map that through the default controller. We
+		 * also set the type to level low since that's what PCI
+		 * interrupts are. If your platform does differently, then
+		 * either provide a proper interrupt tree or don't use this
+		 * function.
+		 */
+		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
+			return -1;
+		if (pin == 0)
+			return -1;
+		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
+		    line == 0xff || line == 0) {
+			return -1;
+		}
+		pr_debug(" No map ! Using line %d (pin %d) from PCI config\n",
+			 line, pin);
+
+		virq = irq_create_mapping(NULL, line);
+		if (virq)
+			irq_set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
+	}
+
+	if (!virq) {
+		pr_debug(" Failed to map !\n");
+		return -1;
+	}
+
+	pr_debug(" Mapped to linux irq %d\n", virq);
+
+	pci_dev->irq = virq;
+
+	return 0;
+}
+
+/*
+ * Platform support for /proc/bus/pci/X/Y mmap()s.
+ *  -- paulus.
+ */
+int pci_iobar_pfn(struct pci_dev *pdev, int bar, struct vm_area_struct *vma)
+{
+	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+	resource_size_t ioaddr = pci_resource_start(pdev, bar);
+
+	if (!hose)
+		return -EINVAL;
+
+	/* Convert to an offset within this PCI controller */
+	ioaddr -= (unsigned long)hose->io_base_virt - _IO_BASE;
+
+	vma->vm_pgoff += (ioaddr + hose->io_base_phys) >> PAGE_SHIFT;
+	return 0;
+}
+
+/*
+ * This one is used by /dev/mem and fbdev who have no clue about the
+ * PCI device, it tries to find the PCI device first and calls the
+ * above routine
+ */
+pgprot_t pci_phys_mem_access_prot(struct file *file,
+				  unsigned long pfn,
+				  unsigned long size,
+				  pgprot_t prot)
+{
+	struct pci_dev *pdev = NULL;
+	struct resource *found = NULL;
+	resource_size_t offset = ((resource_size_t)pfn) << PAGE_SHIFT;
+	int i;
+
+	if (page_is_ram(pfn))
+		return prot;
+
+	prot = pgprot_noncached(prot);
+	for_each_pci_dev(pdev) {
+		for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+			struct resource *rp = &pdev->resource[i];
+			int flags = rp->flags;
+
+			/* Active and same type? */
+			if ((flags & IORESOURCE_MEM) == 0)
+				continue;
+			/* In the range of this resource? */
+			if (offset < (rp->start & PAGE_MASK) ||
+			    offset > rp->end)
+				continue;
+			found = rp;
+			break;
+		}
+		if (found)
+			break;
+	}
+	if (found) {
+		if (found->flags & IORESOURCE_PREFETCH)
+			prot = pgprot_noncached_wc(prot);
+		pci_dev_put(pdev);
+	}
+
+	pr_debug("PCI: Non-PCI map for %llx, prot: %lx\n",
+		 (unsigned long long)offset, pgprot_val(prot));
+
+	return prot;
+}
+
+/* This provides legacy IO read access on a bus */
+int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, size_t size)
+{
+	unsigned long offset;
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct resource *rp = &hose->io_resource;
+	void __iomem *addr;
+
+	/* Check if port can be supported by that bus. We only check
+	 * the ranges of the PHB though, not the bus itself as the rules
+	 * for forwarding legacy cycles down bridges are not our problem
+	 * here. So if the host bridge supports it, we do it.
+	 */
+	offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+	offset += port;
+
+	if (!(rp->flags & IORESOURCE_IO))
+		return -ENXIO;
+	if (offset < rp->start || (offset + size) > rp->end)
+		return -ENXIO;
+	addr = hose->io_base_virt + port;
+
+	switch(size) {
+	case 1:
+		*((u8 *)val) = in_8(addr);
+		return 1;
+	case 2:
+		if (port & 1)
+			return -EINVAL;
+		*((u16 *)val) = in_le16(addr);
+		return 2;
+	case 4:
+		if (port & 3)
+			return -EINVAL;
+		*((u32 *)val) = in_le32(addr);
+		return 4;
+	}
+	return -EINVAL;
+}
+
+/* This provides legacy IO write access on a bus */
+int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, size_t size)
+{
+	unsigned long offset;
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct resource *rp = &hose->io_resource;
+	void __iomem *addr;
+
+	/* Check if port can be supported by that bus. We only check
+	 * the ranges of the PHB though, not the bus itself as the rules
+	 * for forwarding legacy cycles down bridges are not our problem
+	 * here. So if the host bridge supports it, we do it.
+	 */
+	offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+	offset += port;
+
+	if (!(rp->flags & IORESOURCE_IO))
+		return -ENXIO;
+	if (offset < rp->start || (offset + size) > rp->end)
+		return -ENXIO;
+	addr = hose->io_base_virt + port;
+
+	/* WARNING: The generic code is idiotic. It gets passed a pointer
+	 * to what can be a 1, 2 or 4 byte quantity and always reads that
+	 * as a u32, which means that we have to correct the location of
+	 * the data read within those 32 bits for size 1 and 2
+	 */
+	switch(size) {
+	case 1:
+		out_8(addr, val >> 24);
+		return 1;
+	case 2:
+		if (port & 1)
+			return -EINVAL;
+		out_le16(addr, val >> 16);
+		return 2;
+	case 4:
+		if (port & 3)
+			return -EINVAL;
+		out_le32(addr, val);
+		return 4;
+	}
+	return -EINVAL;
+}
+
+/* This provides legacy IO or memory mmap access on a bus */
+int pci_mmap_legacy_page_range(struct pci_bus *bus,
+			       struct vm_area_struct *vma,
+			       enum pci_mmap_state mmap_state)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	resource_size_t offset =
+		((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT;
+	resource_size_t size = vma->vm_end - vma->vm_start;
+	struct resource *rp;
+
+	pr_debug("pci_mmap_legacy_page_range(%04x:%02x, %s @%llx..%llx)\n",
+		 pci_domain_nr(bus), bus->number,
+		 mmap_state == pci_mmap_mem ? "MEM" : "IO",
+		 (unsigned long long)offset,
+		 (unsigned long long)(offset + size - 1));
+
+	if (mmap_state == pci_mmap_mem) {
+		/* Hack alert !
+		 *
+		 * Because X is lame and can fail starting if it gets an error trying
+		 * to mmap legacy_mem (instead of just moving on without legacy memory
+		 * access) we fake it here by giving it anonymous memory, effectively
+		 * behaving just like /dev/zero
+		 */
+		if ((offset + size) > hose->isa_mem_size) {
+			printk(KERN_DEBUG
+			       "Process %s (pid:%d) mapped non-existing PCI legacy memory for 0%04x:%02x\n",
+			       current->comm, current->pid, pci_domain_nr(bus), bus->number);
+			if (vma->vm_flags & VM_SHARED)
+				return shmem_zero_setup(vma);
+			return 0;
+		}
+		offset += hose->isa_mem_phys;
+	} else {
+		unsigned long io_offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+		unsigned long roffset = offset + io_offset;
+		rp = &hose->io_resource;
+		if (!(rp->flags & IORESOURCE_IO))
+			return -ENXIO;
+		if (roffset < rp->start || (roffset + size) > rp->end)
+			return -ENXIO;
+		offset += hose->io_base_phys;
+	}
+	pr_debug(" -> mapping phys %llx\n", (unsigned long long)offset);
+
+	vma->vm_pgoff = offset >> PAGE_SHIFT;
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+	return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+			       vma->vm_end - vma->vm_start,
+			       vma->vm_page_prot);
+}
+
+void pci_resource_to_user(const struct pci_dev *dev, int bar,
+			  const struct resource *rsrc,
+			  resource_size_t *start, resource_size_t *end)
+{
+	struct pci_bus_region region;
+
+	if (rsrc->flags & IORESOURCE_IO) {
+		pcibios_resource_to_bus(dev->bus, &region,
+					(struct resource *) rsrc);
+		*start = region.start;
+		*end = region.end;
+		return;
+	}
+
+	/* We pass a CPU physical address to userland for MMIO instead of a
+	 * BAR value because X is lame and expects to be able to use that
+	 * to pass to /dev/mem!
+	 *
+	 * That means we may have 64-bit values where some apps only expect
+	 * 32 (like X itself since it thinks only Sparc has 64-bit MMIO).
+	 */
+	*start = rsrc->start;
+	*end = rsrc->end;
+}
+
+/**
+ * pci_process_bridge_OF_ranges - Parse PCI bridge resources from device tree
+ * @hose: newly allocated pci_controller to be setup
+ * @dev: device node of the host bridge
+ * @primary: set if primary bus (32 bits only, soon to be deprecated)
+ *
+ * This function will parse the "ranges" property of a PCI host bridge device
+ * node and setup the resource mapping of a pci controller based on its
+ * content.
+ *
+ * Life would be boring if it wasn't for a few issues that we have to deal
+ * with here:
+ *
+ *   - We can only cope with one IO space range and up to 3 Memory space
+ *     ranges. However, some machines (thanks Apple !) tend to split their
+ *     space into lots of small contiguous ranges. So we have to coalesce.
+ *
+ *   - Some busses have IO space not starting at 0, which causes trouble with
+ *     the way we do our IO resource renumbering. The code somewhat deals with
+ *     it for 64 bits but I would expect problems on 32 bits.
+ *
+ *   - Some 32 bits platforms such as 4xx can have physical space larger than
+ *     32 bits so we need to use 64 bits values for the parsing
+ */
+void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+				  struct device_node *dev, int primary)
+{
+	int memno = 0;
+	struct resource *res;
+	struct of_pci_range range;
+	struct of_pci_range_parser parser;
+
+	printk(KERN_INFO "PCI host bridge %pOF %s ranges:\n",
+	       dev, primary ? "(primary)" : "");
+
+	/* Check for ranges property */
+	if (of_pci_range_parser_init(&parser, dev))
+		return;
+
+	/* Parse it */
+	for_each_of_pci_range(&parser, &range) {
+		/* If we failed translation or got a zero-sized region
+		 * (some FW try to feed us with non sensical zero sized regions
+		 * such as power3 which look like some kind of attempt at exposing
+		 * the VGA memory hole)
+		 */
+		if (range.cpu_addr == OF_BAD_ADDR || range.size == 0)
+			continue;
+
+		/* Act based on address space type */
+		res = NULL;
+		switch (range.flags & IORESOURCE_TYPE_BITS) {
+		case IORESOURCE_IO:
+			printk(KERN_INFO
+			       "  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
+			       range.cpu_addr, range.cpu_addr + range.size - 1,
+			       range.pci_addr);
+
+			/* We support only one IO range */
+			if (hose->pci_io_size) {
+				printk(KERN_INFO
+				       " \\--> Skipped (too many) !\n");
+				continue;
+			}
+#ifdef CONFIG_PPC32
+			/* On 32 bits, limit I/O space to 16MB */
+			if (range.size > 0x01000000)
+				range.size = 0x01000000;
+
+			/* 32 bits needs to map IOs here */
+			hose->io_base_virt = ioremap(range.cpu_addr,
+						range.size);
+
+			/* Expect trouble if pci_addr is not 0 */
+			if (primary)
+				isa_io_base =
+					(unsigned long)hose->io_base_virt;
+#endif /* CONFIG_PPC32 */
+			/* pci_io_size and io_base_phys always represent IO
+			 * space starting at 0 so we factor in pci_addr
+			 */
+			hose->pci_io_size = range.pci_addr + range.size;
+			hose->io_base_phys = range.cpu_addr - range.pci_addr;
+
+			/* Build resource */
+			res = &hose->io_resource;
+			range.cpu_addr = range.pci_addr;
+			break;
+		case IORESOURCE_MEM:
+			printk(KERN_INFO
+			       " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
+			       range.cpu_addr, range.cpu_addr + range.size - 1,
+			       range.pci_addr,
+			       (range.pci_space & 0x40000000) ?
+			       "Prefetch" : "");
+
+			/* We support only 3 memory ranges */
+			if (memno >= 3) {
+				printk(KERN_INFO
+				       " \\--> Skipped (too many) !\n");
+				continue;
+			}
+			/* Handles ISA memory hole space here */
+			if (range.pci_addr == 0) {
+				if (primary || isa_mem_base == 0)
+					isa_mem_base = range.cpu_addr;
+				hose->isa_mem_phys = range.cpu_addr;
+				hose->isa_mem_size = range.size;
+			}
+
+			/* Build resource */
+			hose->mem_offset[memno] = range.cpu_addr -
+							range.pci_addr;
+			res = &hose->mem_resources[memno++];
+			break;
+		}
+		if (res != NULL) {
+			res->name = dev->full_name;
+			res->flags = range.flags;
+			res->start = range.cpu_addr;
+			res->end = range.cpu_addr + range.size - 1;
+			res->parent = res->child = res->sibling = NULL;
+		}
+	}
+}
+
+/* Decide whether to display the domain number in /proc */
+int pci_proc_domain(struct pci_bus *bus)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+
+	if (!pci_has_flag(PCI_ENABLE_PROC_DOMAINS))
+		return 0;
+	if (pci_has_flag(PCI_COMPAT_DOMAIN_0))
+		return hose->global_number != 0;
+	return 1;
+}
+
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+	if (ppc_md.pcibios_root_bridge_prepare)
+		return ppc_md.pcibios_root_bridge_prepare(bridge);
+
+	return 0;
+}
+
+/* This header fixup will do the resource fixup for all devices as they are
+ * probed, but not for bridge ranges
+ */
+static void pcibios_fixup_resources(struct pci_dev *dev)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	int i;
+
+	if (!hose) {
+		printk(KERN_ERR "No host bridge for PCI dev %s !\n",
+		       pci_name(dev));
+		return;
+	}
+
+	if (dev->is_virtfn)
+		return;
+
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		struct resource *res = dev->resource + i;
+		struct pci_bus_region reg;
+		if (!res->flags)
+			continue;
+
+		/* If we're going to re-assign everything, we mark all resources
+		 * as unset (and 0-base them). In addition, we mark BARs starting
+		 * at 0 as unset as well, except if PCI_PROBE_ONLY is also set
+		 * since in that case, we don't want to re-assign anything
+		 */
+		pcibios_resource_to_bus(dev->bus, &reg, res);
+		if (pci_has_flag(PCI_REASSIGN_ALL_RSRC) ||
+		    (reg.start == 0 && !pci_has_flag(PCI_PROBE_ONLY))) {
+			/* Only print message if not re-assigning */
+			if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC))
+				pr_debug("PCI:%s Resource %d %pR is unassigned\n",
+					 pci_name(dev), i, res);
+			res->end -= res->start;
+			res->start = 0;
+			res->flags |= IORESOURCE_UNSET;
+			continue;
+		}
+
+		pr_debug("PCI:%s Resource %d %pR\n", pci_name(dev), i, res);
+	}
+
+	/* Call machine specific resource fixup */
+	if (ppc_md.pcibios_fixup_resources)
+		ppc_md.pcibios_fixup_resources(dev);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources);
+
+/* This function tries to figure out if a bridge resource has been initialized
+ * by the firmware or not. It doesn't have to be absolutely bullet proof, but
+ * things go more smoothly when it gets it right. It should covers cases such
+ * as Apple "closed" bridge resources and bare-metal pSeries unassigned bridges
+ */
+static int pcibios_uninitialized_bridge_resource(struct pci_bus *bus,
+						 struct resource *res)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	struct pci_dev *dev = bus->self;
+	resource_size_t offset;
+	struct pci_bus_region region;
+	u16 command;
+	int i;
+
+	/* We don't do anything if PCI_PROBE_ONLY is set */
+	if (pci_has_flag(PCI_PROBE_ONLY))
+		return 0;
+
+	/* Job is a bit different between memory and IO */
+	if (res->flags & IORESOURCE_MEM) {
+		pcibios_resource_to_bus(dev->bus, &region, res);
+
+		/* If the BAR is non-0 then it's probably been initialized */
+		if (region.start != 0)
+			return 0;
+
+		/* The BAR is 0, let's check if memory decoding is enabled on
+		 * the bridge. If not, we consider it unassigned
+		 */
+		pci_read_config_word(dev, PCI_COMMAND, &command);
+		if ((command & PCI_COMMAND_MEMORY) == 0)
+			return 1;
+
+		/* Memory decoding is enabled and the BAR is 0. If any of the bridge
+		 * resources covers that starting address (0 then it's good enough for
+		 * us for memory space)
+		 */
+		for (i = 0; i < 3; i++) {
+			if ((hose->mem_resources[i].flags & IORESOURCE_MEM) &&
+			    hose->mem_resources[i].start == hose->mem_offset[i])
+				return 0;
+		}
+
+		/* Well, it starts at 0 and we know it will collide so we may as
+		 * well consider it as unassigned. That covers the Apple case.
+		 */
+		return 1;
+	} else {
+		/* If the BAR is non-0, then we consider it assigned */
+		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+		if (((res->start - offset) & 0xfffffffful) != 0)
+			return 0;
+
+		/* Here, we are a bit different than memory as typically IO space
+		 * starting at low addresses -is- valid. What we do instead if that
+		 * we consider as unassigned anything that doesn't have IO enabled
+		 * in the PCI command register, and that's it.
+		 */
+		pci_read_config_word(dev, PCI_COMMAND, &command);
+		if (command & PCI_COMMAND_IO)
+			return 0;
+
+		/* It's starting at 0 and IO is disabled in the bridge, consider
+		 * it unassigned
+		 */
+		return 1;
+	}
+}
+
+/* Fixup resources of a PCI<->PCI bridge */
+static void pcibios_fixup_bridge(struct pci_bus *bus)
+{
+	struct resource *res;
+	int i;
+
+	struct pci_dev *dev = bus->self;
+
+	pci_bus_for_each_resource(bus, res, i) {
+		if (!res || !res->flags)
+			continue;
+		if (i >= 3 && bus->self->transparent)
+			continue;
+
+		/* If we're going to reassign everything, we can
+		 * shrink the P2P resource to have size as being
+		 * of 0 in order to save space.
+		 */
+		if (pci_has_flag(PCI_REASSIGN_ALL_RSRC)) {
+			res->flags |= IORESOURCE_UNSET;
+			res->start = 0;
+			res->end = -1;
+			continue;
+		}
+
+		pr_debug("PCI:%s Bus rsrc %d %pR\n", pci_name(dev), i, res);
+
+		/* Try to detect uninitialized P2P bridge resources,
+		 * and clear them out so they get re-assigned later
+		 */
+		if (pcibios_uninitialized_bridge_resource(bus, res)) {
+			res->flags = 0;
+			pr_debug("PCI:%s            (unassigned)\n", pci_name(dev));
+		}
+	}
+}
+
+void pcibios_setup_bus_self(struct pci_bus *bus)
+{
+	struct pci_controller *phb;
+
+	/* Fix up the bus resources for P2P bridges */
+	if (bus->self != NULL)
+		pcibios_fixup_bridge(bus);
+
+	/* Platform specific bus fixups. This is currently only used
+	 * by fsl_pci and I'm hoping to get rid of it at some point
+	 */
+	if (ppc_md.pcibios_fixup_bus)
+		ppc_md.pcibios_fixup_bus(bus);
+
+	/* Setup bus DMA mappings */
+	phb = pci_bus_to_host(bus);
+	if (phb->controller_ops.dma_bus_setup)
+		phb->controller_ops.dma_bus_setup(bus);
+}
+
+static void pcibios_setup_device(struct pci_dev *dev)
+{
+	struct pci_controller *phb;
+	/* Fixup NUMA node as it may not be setup yet by the generic
+	 * code and is needed by the DMA init
+	 */
+	set_dev_node(&dev->dev, pcibus_to_node(dev->bus));
+
+	/* Hook up default DMA ops */
+	set_dma_ops(&dev->dev, pci_dma_ops);
+	set_dma_offset(&dev->dev, PCI_DRAM_OFFSET);
+
+	/* Additional platform DMA/iommu setup */
+	phb = pci_bus_to_host(dev->bus);
+	if (phb->controller_ops.dma_dev_setup)
+		phb->controller_ops.dma_dev_setup(dev);
+
+	/* Read default IRQs and fixup if necessary */
+	pci_read_irq_line(dev);
+	if (ppc_md.pci_irq_fixup)
+		ppc_md.pci_irq_fixup(dev);
+}
+
+int pcibios_add_device(struct pci_dev *dev)
+{
+	/*
+	 * We can only call pcibios_setup_device() after bus setup is complete,
+	 * since some of the platform specific DMA setup code depends on it.
+	 */
+	if (dev->bus->is_added)
+		pcibios_setup_device(dev);
+
+#ifdef CONFIG_PCI_IOV
+	if (ppc_md.pcibios_fixup_sriov)
+		ppc_md.pcibios_fixup_sriov(dev);
+#endif /* CONFIG_PCI_IOV */
+
+	return 0;
+}
+
+void pcibios_setup_bus_devices(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	pr_debug("PCI: Fixup bus devices %d (%s)\n",
+		 bus->number, bus->self ? pci_name(bus->self) : "PHB");
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		/* Cardbus can call us to add new devices to a bus, so ignore
+		 * those who are already fully discovered
+		 */
+		if (pci_dev_is_added(dev))
+			continue;
+
+		pcibios_setup_device(dev);
+	}
+}
+
+void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+	/* When called from the generic PCI probe, read PCI<->PCI bridge
+	 * bases. This is -not- called when generating the PCI tree from
+	 * the OF device-tree.
+	 */
+	pci_read_bridge_bases(bus);
+
+	/* Now fixup the bus bus */
+	pcibios_setup_bus_self(bus);
+
+	/* Now fixup devices on that bus */
+	pcibios_setup_bus_devices(bus);
+}
+EXPORT_SYMBOL(pcibios_fixup_bus);
+
+void pci_fixup_cardbus(struct pci_bus *bus)
+{
+	/* Now fixup devices on that bus */
+	pcibios_setup_bus_devices(bus);
+}
+
+
+static int skip_isa_ioresource_align(struct pci_dev *dev)
+{
+	if (pci_has_flag(PCI_CAN_SKIP_ISA_ALIGN) &&
+	    !(dev->bus->bridge_ctl & PCI_BRIDGE_CTL_ISA))
+		return 1;
+	return 0;
+}
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+				resource_size_t size, resource_size_t align)
+{
+	struct pci_dev *dev = data;
+	resource_size_t start = res->start;
+
+	if (res->flags & IORESOURCE_IO) {
+		if (skip_isa_ioresource_align(dev))
+			return start;
+		if (start & 0x300)
+			start = (start + 0x3ff) & ~0x3ff;
+	}
+
+	return start;
+}
+EXPORT_SYMBOL(pcibios_align_resource);
+
+/*
+ * Reparent resource children of pr that conflict with res
+ * under res, and make res replace those children.
+ */
+static int reparent_resources(struct resource *parent,
+				     struct resource *res)
+{
+	struct resource *p, **pp;
+	struct resource **firstpp = NULL;
+
+	for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) {
+		if (p->end < res->start)
+			continue;
+		if (res->end < p->start)
+			break;
+		if (p->start < res->start || p->end > res->end)
+			return -1;	/* not completely contained */
+		if (firstpp == NULL)
+			firstpp = pp;
+	}
+	if (firstpp == NULL)
+		return -1;	/* didn't find any conflicting entries? */
+	res->parent = parent;
+	res->child = *firstpp;
+	res->sibling = *pp;
+	*firstpp = res;
+	*pp = NULL;
+	for (p = res->child; p != NULL; p = p->sibling) {
+		p->parent = res;
+		pr_debug("PCI: Reparented %s %pR under %s\n",
+			 p->name, p, res->name);
+	}
+	return 0;
+}
+
+/*
+ *  Handle resources of PCI devices.  If the world were perfect, we could
+ *  just allocate all the resource regions and do nothing more.  It isn't.
+ *  On the other hand, we cannot just re-allocate all devices, as it would
+ *  require us to know lots of host bridge internals.  So we attempt to
+ *  keep as much of the original configuration as possible, but tweak it
+ *  when it's found to be wrong.
+ *
+ *  Known BIOS problems we have to work around:
+ *	- I/O or memory regions not configured
+ *	- regions configured, but not enabled in the command register
+ *	- bogus I/O addresses above 64K used
+ *	- expansion ROMs left enabled (this may sound harmless, but given
+ *	  the fact the PCI specs explicitly allow address decoders to be
+ *	  shared between expansion ROMs and other resource regions, it's
+ *	  at least dangerous)
+ *
+ *  Our solution:
+ *	(1) Allocate resources for all buses behind PCI-to-PCI bridges.
+ *	    This gives us fixed barriers on where we can allocate.
+ *	(2) Allocate resources for all enabled devices.  If there is
+ *	    a collision, just mark the resource as unallocated. Also
+ *	    disable expansion ROMs during this step.
+ *	(3) Try to allocate resources for disabled devices.  If the
+ *	    resources were assigned correctly, everything goes well,
+ *	    if they weren't, they won't disturb allocation of other
+ *	    resources.
+ *	(4) Assign new addresses to resources which were either
+ *	    not configured at all or misconfigured.  If explicitly
+ *	    requested by the user, configure expansion ROM address
+ *	    as well.
+ */
+
+static void pcibios_allocate_bus_resources(struct pci_bus *bus)
+{
+	struct pci_bus *b;
+	int i;
+	struct resource *res, *pr;
+
+	pr_debug("PCI: Allocating bus resources for %04x:%02x...\n",
+		 pci_domain_nr(bus), bus->number);
+
+	pci_bus_for_each_resource(bus, res, i) {
+		if (!res || !res->flags || res->start > res->end || res->parent)
+			continue;
+
+		/* If the resource was left unset at this point, we clear it */
+		if (res->flags & IORESOURCE_UNSET)
+			goto clear_resource;
+
+		if (bus->parent == NULL)
+			pr = (res->flags & IORESOURCE_IO) ?
+				&ioport_resource : &iomem_resource;
+		else {
+			pr = pci_find_parent_resource(bus->self, res);
+			if (pr == res) {
+				/* this happens when the generic PCI
+				 * code (wrongly) decides that this
+				 * bridge is transparent  -- paulus
+				 */
+				continue;
+			}
+		}
+
+		pr_debug("PCI: %s (bus %d) bridge rsrc %d: %pR, parent %p (%s)\n",
+			 bus->self ? pci_name(bus->self) : "PHB", bus->number,
+			 i, res, pr, (pr && pr->name) ? pr->name : "nil");
+
+		if (pr && !(pr->flags & IORESOURCE_UNSET)) {
+			struct pci_dev *dev = bus->self;
+
+			if (request_resource(pr, res) == 0)
+				continue;
+			/*
+			 * Must be a conflict with an existing entry.
+			 * Move that entry (or entries) under the
+			 * bridge resource and try again.
+			 */
+			if (reparent_resources(pr, res) == 0)
+				continue;
+
+			if (dev && i < PCI_BRIDGE_RESOURCE_NUM &&
+			    pci_claim_bridge_resource(dev,
+						i + PCI_BRIDGE_RESOURCES) == 0)
+				continue;
+		}
+		pr_warn("PCI: Cannot allocate resource region %d of PCI bridge %d, will remap\n",
+			i, bus->number);
+	clear_resource:
+		/* The resource might be figured out when doing
+		 * reassignment based on the resources required
+		 * by the downstream PCI devices. Here we set
+		 * the size of the resource to be 0 in order to
+		 * save more space.
+		 */
+		res->start = 0;
+		res->end = -1;
+		res->flags = 0;
+	}
+
+	list_for_each_entry(b, &bus->children, node)
+		pcibios_allocate_bus_resources(b);
+}
+
+static inline void alloc_resource(struct pci_dev *dev, int idx)
+{
+	struct resource *pr, *r = &dev->resource[idx];
+
+	pr_debug("PCI: Allocating %s: Resource %d: %pR\n",
+		 pci_name(dev), idx, r);
+
+	pr = pci_find_parent_resource(dev, r);
+	if (!pr || (pr->flags & IORESOURCE_UNSET) ||
+	    request_resource(pr, r) < 0) {
+		printk(KERN_WARNING "PCI: Cannot allocate resource region %d"
+		       " of device %s, will remap\n", idx, pci_name(dev));
+		if (pr)
+			pr_debug("PCI:  parent is %p: %pR\n", pr, pr);
+		/* We'll assign a new address later */
+		r->flags |= IORESOURCE_UNSET;
+		r->end -= r->start;
+		r->start = 0;
+	}
+}
+
+static void __init pcibios_allocate_resources(int pass)
+{
+	struct pci_dev *dev = NULL;
+	int idx, disabled;
+	u16 command;
+	struct resource *r;
+
+	for_each_pci_dev(dev) {
+		pci_read_config_word(dev, PCI_COMMAND, &command);
+		for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
+			r = &dev->resource[idx];
+			if (r->parent)		/* Already allocated */
+				continue;
+			if (!r->flags || (r->flags & IORESOURCE_UNSET))
+				continue;	/* Not assigned at all */
+			/* We only allocate ROMs on pass 1 just in case they
+			 * have been screwed up by firmware
+			 */
+			if (idx == PCI_ROM_RESOURCE )
+				disabled = 1;
+			if (r->flags & IORESOURCE_IO)
+				disabled = !(command & PCI_COMMAND_IO);
+			else
+				disabled = !(command & PCI_COMMAND_MEMORY);
+			if (pass == disabled)
+				alloc_resource(dev, idx);
+		}
+		if (pass)
+			continue;
+		r = &dev->resource[PCI_ROM_RESOURCE];
+		if (r->flags) {
+			/* Turn the ROM off, leave the resource region,
+			 * but keep it unregistered.
+			 */
+			u32 reg;
+			pci_read_config_dword(dev, dev->rom_base_reg, &reg);
+			if (reg & PCI_ROM_ADDRESS_ENABLE) {
+				pr_debug("PCI: Switching off ROM of %s\n",
+					 pci_name(dev));
+				r->flags &= ~IORESOURCE_ROM_ENABLE;
+				pci_write_config_dword(dev, dev->rom_base_reg,
+						       reg & ~PCI_ROM_ADDRESS_ENABLE);
+			}
+		}
+	}
+}
+
+static void __init pcibios_reserve_legacy_regions(struct pci_bus *bus)
+{
+	struct pci_controller *hose = pci_bus_to_host(bus);
+	resource_size_t	offset;
+	struct resource *res, *pres;
+	int i;
+
+	pr_debug("Reserving legacy ranges for domain %04x\n", pci_domain_nr(bus));
+
+	/* Check for IO */
+	if (!(hose->io_resource.flags & IORESOURCE_IO))
+		goto no_io;
+	offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+	BUG_ON(res == NULL);
+	res->name = "Legacy IO";
+	res->flags = IORESOURCE_IO;
+	res->start = offset;
+	res->end = (offset + 0xfff) & 0xfffffffful;
+	pr_debug("Candidate legacy IO: %pR\n", res);
+	if (request_resource(&hose->io_resource, res)) {
+		printk(KERN_DEBUG
+		       "PCI %04x:%02x Cannot reserve Legacy IO %pR\n",
+		       pci_domain_nr(bus), bus->number, res);
+		kfree(res);
+	}
+
+ no_io:
+	/* Check for memory */
+	for (i = 0; i < 3; i++) {
+		pres = &hose->mem_resources[i];
+		offset = hose->mem_offset[i];
+		if (!(pres->flags & IORESOURCE_MEM))
+			continue;
+		pr_debug("hose mem res: %pR\n", pres);
+		if ((pres->start - offset) <= 0xa0000 &&
+		    (pres->end - offset) >= 0xbffff)
+			break;
+	}
+	if (i >= 3)
+		return;
+	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+	BUG_ON(res == NULL);
+	res->name = "Legacy VGA memory";
+	res->flags = IORESOURCE_MEM;
+	res->start = 0xa0000 + offset;
+	res->end = 0xbffff + offset;
+	pr_debug("Candidate VGA memory: %pR\n", res);
+	if (request_resource(pres, res)) {
+		printk(KERN_DEBUG
+		       "PCI %04x:%02x Cannot reserve VGA memory %pR\n",
+		       pci_domain_nr(bus), bus->number, res);
+		kfree(res);
+	}
+}
+
+void __init pcibios_resource_survey(void)
+{
+	struct pci_bus *b;
+
+	/* Allocate and assign resources */
+	list_for_each_entry(b, &pci_root_buses, node)
+		pcibios_allocate_bus_resources(b);
+	if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC)) {
+		pcibios_allocate_resources(0);
+		pcibios_allocate_resources(1);
+	}
+
+	/* Before we start assigning unassigned resource, we try to reserve
+	 * the low IO area and the VGA memory area if they intersect the
+	 * bus available resources to avoid allocating things on top of them
+	 */
+	if (!pci_has_flag(PCI_PROBE_ONLY)) {
+		list_for_each_entry(b, &pci_root_buses, node)
+			pcibios_reserve_legacy_regions(b);
+	}
+
+	/* Now, if the platform didn't decide to blindly trust the firmware,
+	 * we proceed to assigning things that were left unassigned
+	 */
+	if (!pci_has_flag(PCI_PROBE_ONLY)) {
+		pr_debug("PCI: Assigning unassigned resources...\n");
+		pci_assign_unassigned_resources();
+	}
+
+	/* Call machine dependent fixup */
+	if (ppc_md.pcibios_fixup)
+		ppc_md.pcibios_fixup();
+}
+
+/* This is used by the PCI hotplug driver to allocate resource
+ * of newly plugged busses. We can try to consolidate with the
+ * rest of the code later, for now, keep it as-is as our main
+ * resource allocation function doesn't deal with sub-trees yet.
+ */
+void pcibios_claim_one_bus(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+	struct pci_bus *child_bus;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		int i;
+
+		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+			struct resource *r = &dev->resource[i];
+
+			if (r->parent || !r->start || !r->flags)
+				continue;
+
+			pr_debug("PCI: Claiming %s: Resource %d: %pR\n",
+				 pci_name(dev), i, r);
+
+			if (pci_claim_resource(dev, i) == 0)
+				continue;
+
+			pci_claim_bridge_resource(dev, i);
+		}
+	}
+
+	list_for_each_entry(child_bus, &bus->children, node)
+		pcibios_claim_one_bus(child_bus);
+}
+EXPORT_SYMBOL_GPL(pcibios_claim_one_bus);
+
+
+/* pcibios_finish_adding_to_bus
+ *
+ * This is to be called by the hotplug code after devices have been
+ * added to a bus, this include calling it for a PHB that is just
+ * being added
+ */
+void pcibios_finish_adding_to_bus(struct pci_bus *bus)
+{
+	pr_debug("PCI: Finishing adding to hotplug bus %04x:%02x\n",
+		 pci_domain_nr(bus), bus->number);
+
+	/* Allocate bus and devices resources */
+	pcibios_allocate_bus_resources(bus);
+	pcibios_claim_one_bus(bus);
+	if (!pci_has_flag(PCI_PROBE_ONLY)) {
+		if (bus->self)
+			pci_assign_unassigned_bridge_resources(bus->self);
+		else
+			pci_assign_unassigned_bus_resources(bus);
+	}
+
+	/* Fixup EEH */
+	eeh_add_device_tree_late(bus);
+
+	/* Add new devices to global lists.  Register in proc, sysfs. */
+	pci_bus_add_devices(bus);
+
+	/* sysfs files should only be added after devices are added */
+	eeh_add_sysfs_files(bus);
+}
+EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	struct pci_controller *phb = pci_bus_to_host(dev->bus);
+
+	if (phb->controller_ops.enable_device_hook)
+		if (!phb->controller_ops.enable_device_hook(dev))
+			return -EINVAL;
+
+	return pci_enable_resources(dev, mask);
+}
+
+void pcibios_disable_device(struct pci_dev *dev)
+{
+	struct pci_controller *phb = pci_bus_to_host(dev->bus);
+
+	if (phb->controller_ops.disable_device)
+		phb->controller_ops.disable_device(dev);
+}
+
+resource_size_t pcibios_io_space_offset(struct pci_controller *hose)
+{
+	return (unsigned long) hose->io_base_virt - _IO_BASE;
+}
+
+static void pcibios_setup_phb_resources(struct pci_controller *hose,
+					struct list_head *resources)
+{
+	struct resource *res;
+	resource_size_t offset;
+	int i;
+
+	/* Hookup PHB IO resource */
+	res = &hose->io_resource;
+
+	if (!res->flags) {
+		pr_debug("PCI: I/O resource not set for host"
+			 " bridge %pOF (domain %d)\n",
+			 hose->dn, hose->global_number);
+	} else {
+		offset = pcibios_io_space_offset(hose);
+
+		pr_debug("PCI: PHB IO resource    = %pR off 0x%08llx\n",
+			 res, (unsigned long long)offset);
+		pci_add_resource_offset(resources, res, offset);
+	}
+
+	/* Hookup PHB Memory resources */
+	for (i = 0; i < 3; ++i) {
+		res = &hose->mem_resources[i];
+		if (!res->flags)
+			continue;
+
+		offset = hose->mem_offset[i];
+		pr_debug("PCI: PHB MEM resource %d = %pR off 0x%08llx\n", i,
+			 res, (unsigned long long)offset);
+
+		pci_add_resource_offset(resources, res, offset);
+	}
+}
+
+/*
+ * Null PCI config access functions, for the case when we can't
+ * find a hose.
+ */
+#define NULL_PCI_OP(rw, size, type)					\
+static int								\
+null_##rw##_config_##size(struct pci_dev *dev, int offset, type val)	\
+{									\
+	return PCIBIOS_DEVICE_NOT_FOUND;    				\
+}
+
+static int
+null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		 int len, u32 *val)
+{
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int
+null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		  int len, u32 val)
+{
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static struct pci_ops null_pci_ops =
+{
+	.read = null_read_config,
+	.write = null_write_config,
+};
+
+/*
+ * These functions are used early on before PCI scanning is done
+ * and all of the pci_dev and pci_bus structures have been created.
+ */
+static struct pci_bus *
+fake_pci_bus(struct pci_controller *hose, int busnr)
+{
+	static struct pci_bus bus;
+
+	if (hose == NULL) {
+		printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
+	}
+	bus.number = busnr;
+	bus.sysdata = hose;
+	bus.ops = hose? hose->ops: &null_pci_ops;
+	return &bus;
+}
+
+#define EARLY_PCI_OP(rw, size, type)					\
+int early_##rw##_config_##size(struct pci_controller *hose, int bus,	\
+			       int devfn, int offset, type value)	\
+{									\
+	return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus),	\
+					    devfn, offset, value);	\
+}
+
+EARLY_PCI_OP(read, byte, u8 *)
+EARLY_PCI_OP(read, word, u16 *)
+EARLY_PCI_OP(read, dword, u32 *)
+EARLY_PCI_OP(write, byte, u8)
+EARLY_PCI_OP(write, word, u16)
+EARLY_PCI_OP(write, dword, u32)
+
+int early_find_capability(struct pci_controller *hose, int bus, int devfn,
+			  int cap)
+{
+	return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
+}
+
+struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
+{
+	struct pci_controller *hose = bus->sysdata;
+
+	return of_node_get(hose->dn);
+}
+
+/**
+ * pci_scan_phb - Given a pci_controller, setup and scan the PCI bus
+ * @hose: Pointer to the PCI host controller instance structure
+ */
+void pcibios_scan_phb(struct pci_controller *hose)
+{
+	LIST_HEAD(resources);
+	struct pci_bus *bus;
+	struct device_node *node = hose->dn;
+	int mode;
+
+	pr_debug("PCI: Scanning PHB %pOF\n", node);
+
+	/* Get some IO space for the new PHB */
+	pcibios_setup_phb_io_space(hose);
+
+	/* Wire up PHB bus resources */
+	pcibios_setup_phb_resources(hose, &resources);
+
+	hose->busn.start = hose->first_busno;
+	hose->busn.end	 = hose->last_busno;
+	hose->busn.flags = IORESOURCE_BUS;
+	pci_add_resource(&resources, &hose->busn);
+
+	/* Create an empty bus for the toplevel */
+	bus = pci_create_root_bus(hose->parent, hose->first_busno,
+				  hose->ops, hose, &resources);
+	if (bus == NULL) {
+		pr_err("Failed to create bus for PCI domain %04x\n",
+			hose->global_number);
+		pci_free_resource_list(&resources);
+		return;
+	}
+	hose->bus = bus;
+
+	/* Get probe mode and perform scan */
+	mode = PCI_PROBE_NORMAL;
+	if (node && hose->controller_ops.probe_mode)
+		mode = hose->controller_ops.probe_mode(bus);
+	pr_debug("    probe mode: %d\n", mode);
+	if (mode == PCI_PROBE_DEVTREE)
+		of_scan_bus(node, bus);
+
+	if (mode == PCI_PROBE_NORMAL) {
+		pci_bus_update_busn_res_end(bus, 255);
+		hose->last_busno = pci_scan_child_bus(bus);
+		pci_bus_update_busn_res_end(bus, hose->last_busno);
+	}
+
+	/* Platform gets a chance to do some global fixups before
+	 * we proceed to resource allocation
+	 */
+	if (ppc_md.pcibios_fixup_phb)
+		ppc_md.pcibios_fixup_phb(hose);
+
+	/* Configure PCI Express settings */
+	if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
+		struct pci_bus *child;
+		list_for_each_entry(child, &bus->children, node)
+			pcie_bus_configure_settings(child);
+	}
+}
+EXPORT_SYMBOL_GPL(pcibios_scan_phb);
+
+static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
+{
+	int i, class = dev->class >> 8;
+	/* When configured as agent, programing interface = 1 */
+	int prog_if = dev->class & 0xf;
+
+	if ((class == PCI_CLASS_PROCESSOR_POWERPC ||
+	     class == PCI_CLASS_BRIDGE_OTHER) &&
+		(dev->hdr_type == PCI_HEADER_TYPE_NORMAL) &&
+		(prog_if == 0) &&
+		(dev->bus->parent == NULL)) {
+		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+			dev->resource[i].start = 0;
+			dev->resource[i].end = 0;
+			dev->resource[i].flags = 0;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl);
+
+
+static int __init discover_phbs(void)
+{
+	if (ppc_md.discover_phbs)
+		ppc_md.discover_phbs();
+
+	return 0;
+}
+core_initcall(discover_phbs);