Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 664 insertions, 0 deletions

diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
new file mode 100644
index 000000000..eb5252177
--- /dev/null
+++ b/arch/powerpc/mm/fault.c
@@ -0,0 +1,664 @@
+/*
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Derived from "arch/i386/mm/fault.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  Modified by Cort Dougan and Paul Mackerras.
+ *
+ *  Modified for PPC64 by Dave Engebretsen (engebret@ibm.com)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/pagemap.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/highmem.h>
+#include <linux/extable.h>
+#include <linux/kprobes.h>
+#include <linux/kdebug.h>
+#include <linux/perf_event.h>
+#include <linux/ratelimit.h>
+#include <linux/context_tracking.h>
+#include <linux/hugetlb.h>
+#include <linux/uaccess.h>
+
+#include <asm/firmware.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/mmu_context.h>
+#include <asm/siginfo.h>
+#include <asm/debug.h>
+
+static inline bool notify_page_fault(struct pt_regs *regs)
+{
+	bool ret = false;
+
+#ifdef CONFIG_KPROBES
+	/* kprobe_running() needs smp_processor_id() */
+	if (!user_mode(regs)) {
+		preempt_disable();
+		if (kprobe_running() && kprobe_fault_handler(regs, 11))
+			ret = true;
+		preempt_enable();
+	}
+#endif /* CONFIG_KPROBES */
+
+	if (unlikely(debugger_fault_handler(regs)))
+		ret = true;
+
+	return ret;
+}
+
+/*
+ * Check whether the instruction inst is a store using
+ * an update addressing form which will update r1.
+ */
+static bool store_updates_sp(unsigned int inst)
+{
+	/* check for 1 in the rA field */
+	if (((inst >> 16) & 0x1f) != 1)
+		return false;
+	/* check major opcode */
+	switch (inst >> 26) {
+	case OP_STWU:
+	case OP_STBU:
+	case OP_STHU:
+	case OP_STFSU:
+	case OP_STFDU:
+		return true;
+	case OP_STD:	/* std or stdu */
+		return (inst & 3) == 1;
+	case OP_31:
+		/* check minor opcode */
+		switch ((inst >> 1) & 0x3ff) {
+		case OP_31_XOP_STDUX:
+		case OP_31_XOP_STWUX:
+		case OP_31_XOP_STBUX:
+		case OP_31_XOP_STHUX:
+		case OP_31_XOP_STFSUX:
+		case OP_31_XOP_STFDUX:
+			return true;
+		}
+	}
+	return false;
+}
+/*
+ * do_page_fault error handling helpers
+ */
+
+static int
+__bad_area_nosemaphore(struct pt_regs *regs, unsigned long address, int si_code,
+		int pkey)
+{
+	/*
+	 * If we are in kernel mode, bail out with a SEGV, this will
+	 * be caught by the assembly which will restore the non-volatile
+	 * registers before calling bad_page_fault()
+	 */
+	if (!user_mode(regs))
+		return SIGSEGV;
+
+	_exception_pkey(SIGSEGV, regs, si_code, address, pkey);
+
+	return 0;
+}
+
+static noinline int bad_area_nosemaphore(struct pt_regs *regs, unsigned long address)
+{
+	return __bad_area_nosemaphore(regs, address, SEGV_MAPERR, 0);
+}
+
+static int __bad_area(struct pt_regs *regs, unsigned long address, int si_code,
+			int pkey)
+{
+	struct mm_struct *mm = current->mm;
+
+	/*
+	 * Something tried to access memory that isn't in our memory map..
+	 * Fix it, but check if it's kernel or user first..
+	 */
+	up_read(&mm->mmap_sem);
+
+	return __bad_area_nosemaphore(regs, address, si_code, pkey);
+}
+
+static noinline int bad_area(struct pt_regs *regs, unsigned long address)
+{
+	return __bad_area(regs, address, SEGV_MAPERR, 0);
+}
+
+static int bad_key_fault_exception(struct pt_regs *regs, unsigned long address,
+				    int pkey)
+{
+	return __bad_area_nosemaphore(regs, address, SEGV_PKUERR, pkey);
+}
+
+static noinline int bad_access(struct pt_regs *regs, unsigned long address)
+{
+	return __bad_area(regs, address, SEGV_ACCERR, 0);
+}
+
+static int do_sigbus(struct pt_regs *regs, unsigned long address,
+		     vm_fault_t fault)
+{
+	siginfo_t info;
+	unsigned int lsb = 0;
+
+	if (!user_mode(regs))
+		return SIGBUS;
+
+	current->thread.trap_nr = BUS_ADRERR;
+	clear_siginfo(&info);
+	info.si_signo = SIGBUS;
+	info.si_errno = 0;
+	info.si_code = BUS_ADRERR;
+	info.si_addr = (void __user *)address;
+#ifdef CONFIG_MEMORY_FAILURE
+	if (fault & (VM_FAULT_HWPOISON|VM_FAULT_HWPOISON_LARGE)) {
+		pr_err("MCE: Killing %s:%d due to hardware memory corruption fault at %lx\n",
+			current->comm, current->pid, address);
+		info.si_code = BUS_MCEERR_AR;
+	}
+
+	if (fault & VM_FAULT_HWPOISON_LARGE)
+		lsb = hstate_index_to_shift(VM_FAULT_GET_HINDEX(fault));
+	if (fault & VM_FAULT_HWPOISON)
+		lsb = PAGE_SHIFT;
+#endif
+	info.si_addr_lsb = lsb;
+	force_sig_info(SIGBUS, &info, current);
+	return 0;
+}
+
+static int mm_fault_error(struct pt_regs *regs, unsigned long addr,
+				vm_fault_t fault)
+{
+	/*
+	 * Kernel page fault interrupted by SIGKILL. We have no reason to
+	 * continue processing.
+	 */
+	if (fatal_signal_pending(current) && !user_mode(regs))
+		return SIGKILL;
+
+	/* Out of memory */
+	if (fault & VM_FAULT_OOM) {
+		/*
+		 * We ran out of memory, or some other thing happened to us that
+		 * made us unable to handle the page fault gracefully.
+		 */
+		if (!user_mode(regs))
+			return SIGSEGV;
+		pagefault_out_of_memory();
+	} else {
+		if (fault & (VM_FAULT_SIGBUS|VM_FAULT_HWPOISON|
+			     VM_FAULT_HWPOISON_LARGE))
+			return do_sigbus(regs, addr, fault);
+		else if (fault & VM_FAULT_SIGSEGV)
+			return bad_area_nosemaphore(regs, addr);
+		else
+			BUG();
+	}
+	return 0;
+}
+
+/* Is this a bad kernel fault ? */
+static bool bad_kernel_fault(bool is_exec, unsigned long error_code,
+			     unsigned long address)
+{
+	/* NX faults set DSISR_PROTFAULT on the 8xx, DSISR_NOEXEC_OR_G on others */
+	if (is_exec && (error_code & (DSISR_NOEXEC_OR_G | DSISR_KEYFAULT |
+				      DSISR_PROTFAULT))) {
+		printk_ratelimited(KERN_CRIT "kernel tried to execute"
+				   " exec-protected page (%lx) -"
+				   "exploit attempt? (uid: %d)\n",
+				   address, from_kuid(&init_user_ns,
+						      current_uid()));
+	}
+	return is_exec || (address >= TASK_SIZE);
+}
+
+// This comes from 64-bit struct rt_sigframe + __SIGNAL_FRAMESIZE
+#define SIGFRAME_MAX_SIZE	(4096 + 128)
+
+static bool bad_stack_expansion(struct pt_regs *regs, unsigned long address,
+				struct vm_area_struct *vma, unsigned int flags,
+				bool *must_retry)
+{
+	/*
+	 * N.B. The POWER/Open ABI allows programs to access up to
+	 * 288 bytes below the stack pointer.
+	 * The kernel signal delivery code writes a bit over 4KB
+	 * below the stack pointer (r1) before decrementing it.
+	 * The exec code can write slightly over 640kB to the stack
+	 * before setting the user r1.  Thus we allow the stack to
+	 * expand to 1MB without further checks.
+	 */
+	if (address + 0x100000 < vma->vm_end) {
+		unsigned int __user *nip = (unsigned int __user *)regs->nip;
+		/* get user regs even if this fault is in kernel mode */
+		struct pt_regs *uregs = current->thread.regs;
+		if (uregs == NULL)
+			return true;
+
+		/*
+		 * A user-mode access to an address a long way below
+		 * the stack pointer is only valid if the instruction
+		 * is one which would update the stack pointer to the
+		 * address accessed if the instruction completed,
+		 * i.e. either stwu rs,n(r1) or stwux rs,r1,rb
+		 * (or the byte, halfword, float or double forms).
+		 *
+		 * If we don't check this then any write to the area
+		 * between the last mapped region and the stack will
+		 * expand the stack rather than segfaulting.
+		 */
+		if (address + SIGFRAME_MAX_SIZE >= uregs->gpr[1])
+			return false;
+
+		if ((flags & FAULT_FLAG_WRITE) && (flags & FAULT_FLAG_USER) &&
+		    access_ok(VERIFY_READ, nip, sizeof(*nip))) {
+			unsigned int inst;
+			int res;
+
+			pagefault_disable();
+			res = __get_user_inatomic(inst, nip);
+			pagefault_enable();
+			if (!res)
+				return !store_updates_sp(inst);
+			*must_retry = true;
+		}
+		return true;
+	}
+	return false;
+}
+
+static bool access_error(bool is_write, bool is_exec,
+			 struct vm_area_struct *vma)
+{
+	/*
+	 * Allow execution from readable areas if the MMU does not
+	 * provide separate controls over reading and executing.
+	 *
+	 * Note: That code used to not be enabled for 4xx/BookE.
+	 * It is now as I/D cache coherency for these is done at
+	 * set_pte_at() time and I see no reason why the test
+	 * below wouldn't be valid on those processors. This -may-
+	 * break programs compiled with a really old ABI though.
+	 */
+	if (is_exec) {
+		return !(vma->vm_flags & VM_EXEC) &&
+			(cpu_has_feature(CPU_FTR_NOEXECUTE) ||
+			 !(vma->vm_flags & (VM_READ | VM_WRITE)));
+	}
+
+	if (is_write) {
+		if (unlikely(!(vma->vm_flags & VM_WRITE)))
+			return true;
+		return false;
+	}
+
+	if (unlikely(!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))))
+		return true;
+	/*
+	 * We should ideally do the vma pkey access check here. But in the
+	 * fault path, handle_mm_fault() also does the same check. To avoid
+	 * these multiple checks, we skip it here and handle access error due
+	 * to pkeys later.
+	 */
+	return false;
+}
+
+#ifdef CONFIG_PPC_SMLPAR
+static inline void cmo_account_page_fault(void)
+{
+	if (firmware_has_feature(FW_FEATURE_CMO)) {
+		u32 page_ins;
+
+		preempt_disable();
+		page_ins = be32_to_cpu(get_lppaca()->page_ins);
+		page_ins += 1 << PAGE_FACTOR;
+		get_lppaca()->page_ins = cpu_to_be32(page_ins);
+		preempt_enable();
+	}
+}
+#else
+static inline void cmo_account_page_fault(void) { }
+#endif /* CONFIG_PPC_SMLPAR */
+
+#ifdef CONFIG_PPC_STD_MMU
+static void sanity_check_fault(bool is_write, unsigned long error_code)
+{
+	/*
+	 * For hash translation mode, we should never get a
+	 * PROTFAULT. Any update to pte to reduce access will result in us
+	 * removing the hash page table entry, thus resulting in a DSISR_NOHPTE
+	 * fault instead of DSISR_PROTFAULT.
+	 *
+	 * A pte update to relax the access will not result in a hash page table
+	 * entry invalidate and hence can result in DSISR_PROTFAULT.
+	 * ptep_set_access_flags() doesn't do a hpte flush. This is why we have
+	 * the special !is_write in the below conditional.
+	 *
+	 * For platforms that doesn't supports coherent icache and do support
+	 * per page noexec bit, we do setup things such that we do the
+	 * sync between D/I cache via fault. But that is handled via low level
+	 * hash fault code (hash_page_do_lazy_icache()) and we should not reach
+	 * here in such case.
+	 *
+	 * For wrong access that can result in PROTFAULT, the above vma->vm_flags
+	 * check should handle those and hence we should fall to the bad_area
+	 * handling correctly.
+	 *
+	 * For embedded with per page exec support that doesn't support coherent
+	 * icache we do get PROTFAULT and we handle that D/I cache sync in
+	 * set_pte_at while taking the noexec/prot fault. Hence this is WARN_ON
+	 * is conditional for server MMU.
+	 *
+	 * For radix, we can get prot fault for autonuma case, because radix
+	 * page table will have them marked noaccess for user.
+	 */
+	if (!radix_enabled() && !is_write)
+		WARN_ON_ONCE(error_code & DSISR_PROTFAULT);
+}
+#else
+static void sanity_check_fault(bool is_write, unsigned long error_code) { }
+#endif /* CONFIG_PPC_STD_MMU */
+
+/*
+ * Define the correct "is_write" bit in error_code based
+ * on the processor family
+ */
+#if (defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
+#define page_fault_is_write(__err)	((__err) & ESR_DST)
+#define page_fault_is_bad(__err)	(0)
+#else
+#define page_fault_is_write(__err)	((__err) & DSISR_ISSTORE)
+#if defined(CONFIG_PPC_8xx)
+#define page_fault_is_bad(__err)	((__err) & DSISR_NOEXEC_OR_G)
+#elif defined(CONFIG_PPC64)
+#define page_fault_is_bad(__err)	((__err) & DSISR_BAD_FAULT_64S)
+#else
+#define page_fault_is_bad(__err)	((__err) & DSISR_BAD_FAULT_32S)
+#endif
+#endif
+
+/*
+ * For 600- and 800-family processors, the error_code parameter is DSISR
+ * for a data fault, SRR1 for an instruction fault. For 400-family processors
+ * the error_code parameter is ESR for a data fault, 0 for an instruction
+ * fault.
+ * For 64-bit processors, the error_code parameter is
+ *  - DSISR for a non-SLB data access fault,
+ *  - SRR1 & 0x08000000 for a non-SLB instruction access fault
+ *  - 0 any SLB fault.
+ *
+ * The return value is 0 if the fault was handled, or the signal
+ * number if this is a kernel fault that can't be handled here.
+ */
+static int __do_page_fault(struct pt_regs *regs, unsigned long address,
+			   unsigned long error_code)
+{
+	struct vm_area_struct * vma;
+	struct mm_struct *mm = current->mm;
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
+ 	int is_exec = TRAP(regs) == 0x400;
+	int is_user = user_mode(regs);
+	int is_write = page_fault_is_write(error_code);
+	vm_fault_t fault, major = 0;
+	bool must_retry = false;
+
+	if (notify_page_fault(regs))
+		return 0;
+
+	if (unlikely(page_fault_is_bad(error_code))) {
+		if (is_user) {
+			_exception(SIGBUS, regs, BUS_OBJERR, address);
+			return 0;
+		}
+		return SIGBUS;
+	}
+
+	/* Additional sanity check(s) */
+	sanity_check_fault(is_write, error_code);
+
+	/*
+	 * The kernel should never take an execute fault nor should it
+	 * take a page fault to a kernel address.
+	 */
+	if (unlikely(!is_user && bad_kernel_fault(is_exec, error_code, address)))
+		return SIGSEGV;
+
+	/*
+	 * If we're in an interrupt, have no user context or are running
+	 * in a region with pagefaults disabled then we must not take the fault
+	 */
+	if (unlikely(faulthandler_disabled() || !mm)) {
+		if (is_user)
+			printk_ratelimited(KERN_ERR "Page fault in user mode"
+					   " with faulthandler_disabled()=%d"
+					   " mm=%p\n",
+					   faulthandler_disabled(), mm);
+		return bad_area_nosemaphore(regs, address);
+	}
+
+	/* We restore the interrupt state now */
+	if (!arch_irq_disabled_regs(regs))
+		local_irq_enable();
+
+	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
+
+	if (error_code & DSISR_KEYFAULT)
+		return bad_key_fault_exception(regs, address,
+					       get_mm_addr_key(mm, address));
+
+	/*
+	 * We want to do this outside mmap_sem, because reading code around nip
+	 * can result in fault, which will cause a deadlock when called with
+	 * mmap_sem held
+	 */
+	if (is_user)
+		flags |= FAULT_FLAG_USER;
+	if (is_write)
+		flags |= FAULT_FLAG_WRITE;
+	if (is_exec)
+		flags |= FAULT_FLAG_INSTRUCTION;
+
+	/* When running in the kernel we expect faults to occur only to
+	 * addresses in user space.  All other faults represent errors in the
+	 * kernel and should generate an OOPS.  Unfortunately, in the case of an
+	 * erroneous fault occurring in a code path which already holds mmap_sem
+	 * we will deadlock attempting to validate the fault against the
+	 * address space.  Luckily the kernel only validly references user
+	 * space from well defined areas of code, which are listed in the
+	 * exceptions table.
+	 *
+	 * As the vast majority of faults will be valid we will only perform
+	 * the source reference check when there is a possibility of a deadlock.
+	 * Attempt to lock the address space, if we cannot we then validate the
+	 * source.  If this is invalid we can skip the address space check,
+	 * thus avoiding the deadlock.
+	 */
+	if (unlikely(!down_read_trylock(&mm->mmap_sem))) {
+		if (!is_user && !search_exception_tables(regs->nip))
+			return bad_area_nosemaphore(regs, address);
+
+retry:
+		down_read(&mm->mmap_sem);
+	} else {
+		/*
+		 * The above down_read_trylock() might have succeeded in
+		 * which case we'll have missed the might_sleep() from
+		 * down_read():
+		 */
+		might_sleep();
+	}
+
+	vma = find_vma(mm, address);
+	if (unlikely(!vma))
+		return bad_area(regs, address);
+	if (likely(vma->vm_start <= address))
+		goto good_area;
+	if (unlikely(!(vma->vm_flags & VM_GROWSDOWN)))
+		return bad_area(regs, address);
+
+	/* The stack is being expanded, check if it's valid */
+	if (unlikely(bad_stack_expansion(regs, address, vma, flags,
+					 &must_retry))) {
+		if (!must_retry)
+			return bad_area(regs, address);
+
+		up_read(&mm->mmap_sem);
+		if (fault_in_pages_readable((const char __user *)regs->nip,
+					    sizeof(unsigned int)))
+			return bad_area_nosemaphore(regs, address);
+		goto retry;
+	}
+
+	/* Try to expand it */
+	if (unlikely(expand_stack(vma, address)))
+		return bad_area(regs, address);
+
+good_area:
+	if (unlikely(access_error(is_write, is_exec, vma)))
+		return bad_access(regs, address);
+
+	/*
+	 * If for any reason at all we couldn't handle the fault,
+	 * make sure we exit gracefully rather than endlessly redo
+	 * the fault.
+	 */
+	fault = handle_mm_fault(vma, address, flags);
+
+#ifdef CONFIG_PPC_MEM_KEYS
+	/*
+	 * we skipped checking for access error due to key earlier.
+	 * Check that using handle_mm_fault error return.
+	 */
+	if (unlikely(fault & VM_FAULT_SIGSEGV) &&
+		!arch_vma_access_permitted(vma, is_write, is_exec, 0)) {
+
+		int pkey = vma_pkey(vma);
+
+		up_read(&mm->mmap_sem);
+		return bad_key_fault_exception(regs, address, pkey);
+	}
+#endif /* CONFIG_PPC_MEM_KEYS */
+
+	major |= fault & VM_FAULT_MAJOR;
+
+	/*
+	 * Handle the retry right now, the mmap_sem has been released in that
+	 * case.
+	 */
+	if (unlikely(fault & VM_FAULT_RETRY)) {
+		/* We retry only once */
+		if (flags & FAULT_FLAG_ALLOW_RETRY) {
+			/*
+			 * Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk
+			 * of starvation.
+			 */
+			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+			flags |= FAULT_FLAG_TRIED;
+			if (!fatal_signal_pending(current))
+				goto retry;
+		}
+
+		/*
+		 * User mode? Just return to handle the fatal exception otherwise
+		 * return to bad_page_fault
+		 */
+		return is_user ? 0 : SIGBUS;
+	}
+
+	up_read(&current->mm->mmap_sem);
+
+	if (unlikely(fault & VM_FAULT_ERROR))
+		return mm_fault_error(regs, address, fault);
+
+	/*
+	 * Major/minor page fault accounting.
+	 */
+	if (major) {
+		current->maj_flt++;
+		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address);
+		cmo_account_page_fault();
+	} else {
+		current->min_flt++;
+		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address);
+	}
+	return 0;
+}
+NOKPROBE_SYMBOL(__do_page_fault);
+
+int do_page_fault(struct pt_regs *regs, unsigned long address,
+		  unsigned long error_code)
+{
+	enum ctx_state prev_state = exception_enter();
+	int rc = __do_page_fault(regs, address, error_code);
+	exception_exit(prev_state);
+	return rc;
+}
+NOKPROBE_SYMBOL(do_page_fault);
+
+/*
+ * bad_page_fault is called when we have a bad access from the kernel.
+ * It is called from the DSI and ISI handlers in head.S and from some
+ * of the procedures in traps.c.
+ */
+void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
+{
+	const struct exception_table_entry *entry;
+
+	/* Are we prepared to handle this fault?  */
+	if ((entry = search_exception_tables(regs->nip)) != NULL) {
+		regs->nip = extable_fixup(entry);
+		return;
+	}
+
+	/* kernel has accessed a bad area */
+
+	switch (TRAP(regs)) {
+	case 0x300:
+	case 0x380:
+		pr_alert("BUG: %s at 0x%08lx\n",
+			 regs->dar < PAGE_SIZE ? "Kernel NULL pointer dereference" :
+			 "Unable to handle kernel data access", regs->dar);
+		break;
+	case 0x400:
+	case 0x480:
+		pr_alert("BUG: Unable to handle kernel instruction fetch%s",
+			 regs->nip < PAGE_SIZE ? " (NULL pointer?)\n" : "\n");
+		break;
+	case 0x600:
+		pr_alert("BUG: Unable to handle kernel unaligned access at 0x%08lx\n",
+			 regs->dar);
+		break;
+	default:
+		pr_alert("BUG: Unable to handle unknown paging fault at 0x%08lx\n",
+			 regs->dar);
+		break;
+	}
+	printk(KERN_ALERT "Faulting instruction address: 0x%08lx\n",
+		regs->nip);
+
+	if (task_stack_end_corrupted(current))
+		printk(KERN_ALERT "Thread overran stack, or stack corrupted\n");
+
+	die("Kernel access of bad area", regs, sig);
+}