Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 139 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c
new file mode 100644
index 000000000..2c670848f
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/sbc8548.c
@@ -0,0 +1,139 @@
+/*
+ * Wind River SBC8548 setup and early boot code.
+ *
+ * Copyright 2007 Wind River Systems Inc.
+ *
+ * By Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * Based largely on the MPC8548CDS support - Copyright 2005 Freescale Inc.
+ *
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/initrd.h>
+#include <linux/interrupt.h>
+#include <linux/fsl_devices.h>
+#include <linux/of_platform.h>
+
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <linux/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/pci-bridge.h>
+#include <asm/irq.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc85xx.h"
+
+static int sbc_rev;
+
+static void __init sbc8548_pic_init(void)
+{
+	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
+			0, 256, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+	mpic_init(mpic);
+}
+
+/* Extract the HW Rev from the EPLD on the board */
+static int __init sbc8548_hw_rev(void)
+{
+	struct device_node *np;
+	struct resource res;
+	unsigned int *rev;
+	int board_rev = 0;
+
+	np = of_find_compatible_node(NULL, NULL, "hw-rev");
+	if (np == NULL) {
+		printk("No HW-REV found in DTB.\n");
+		return -ENODEV;
+	}
+
+	of_address_to_resource(np, 0, &res);
+	of_node_put(np);
+
+	rev = ioremap(res.start,sizeof(unsigned int));
+	board_rev = (*rev) >> 28;
+	iounmap(rev);
+
+	return board_rev;
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init sbc8548_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("sbc8548_setup_arch()", 0);
+
+	fsl_pci_assign_primary();
+
+	sbc_rev = sbc8548_hw_rev();
+}
+
+static void sbc8548_show_cpuinfo(struct seq_file *m)
+{
+	uint pvid, svid, phid1;
+
+	pvid = mfspr(SPRN_PVR);
+	svid = mfspr(SPRN_SVR);
+
+	seq_printf(m, "Vendor\t\t: Wind River\n");
+	seq_printf(m, "Machine\t\t: SBC8548 v%d\n", sbc_rev);
+	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+	/* Display cpu Pll setting */
+	phid1 = mfspr(SPRN_HID1);
+	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+}
+
+machine_arch_initcall(sbc8548, mpc85xx_common_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init sbc8548_probe(void)
+{
+	return of_machine_is_compatible("SBC8548");
+}
+
+define_machine(sbc8548) {
+	.name		= "SBC8548",
+	.probe		= sbc8548_probe,
+	.setup_arch	= sbc8548_setup_arch,
+	.init_IRQ	= sbc8548_pic_init,
+	.show_cpuinfo	= sbc8548_show_cpuinfo,
+	.get_irq	= mpic_get_irq,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
+#endif
+	.calibrate_decr = generic_calibrate_decr,
+	.progress	= udbg_progress,
+};