Adding upstream version 4.19.304.upstream/4.19.304upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

8 files changed, 95 insertions, 92 deletions

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 1fb7b6d72..63e00320e 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 config SUPERH
 	def_bool y
+	select ARCH_HAS_CPU_FINALIZE_INIT
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_MIGHT_HAVE_PC_PARPORT
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 71acd3d9b..dfc784f89 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -26,6 +26,17 @@ config STACK_DEBUG
 	  every function call and will therefore incur a major
 	  performance hit. Most users should say N.
 
+config EARLY_PRINTK
+	bool "Early printk"
+	depends on SH_STANDARD_BIOS
+	help
+	  Say Y here to redirect kernel printk messages to the serial port
+	  used by the SH-IPL bootloader, starting very early in the boot
+	  process and ending when the kernel's serial console is initialised.
+	  This option is only useful while porting the kernel to a new machine,
+	  when the kernel may crash or hang before the serial console is
+	  initialised.  If unsure, say N.
+
 config 4KSTACKS
 	bool "Use 4Kb for kernel stacks instead of 8Kb"
 	depends on DEBUG_KERNEL && (MMU || BROKEN) && !PAGE_SIZE_64KB
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index afde2a7d3..e0679d8a9 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -22,6 +22,18 @@
 #include <cpu/dma.h>
 
 /*
+ * Some of the SoCs feature two DMAC modules. In such a case, the channels are
+ * distributed equally among them.
+ */
+#ifdef	SH_DMAC_BASE1
+#define	SH_DMAC_NR_MD_CH	(CONFIG_NR_ONCHIP_DMA_CHANNELS / 2)
+#else
+#define	SH_DMAC_NR_MD_CH	CONFIG_NR_ONCHIP_DMA_CHANNELS
+#endif
+
+#define	SH_DMAC_CH_SZ		0x10
+
+/*
  * Define the default configuration for dual address memory-memory transfer.
  * The 0x400 value represents auto-request, external->external.
  */
@@ -32,7 +44,7 @@ static unsigned long dma_find_base(unsigned int chan)
 	unsigned long base = SH_DMAC_BASE0;
 
 #ifdef SH_DMAC_BASE1
-	if (chan >= 6)
+	if (chan >= SH_DMAC_NR_MD_CH)
 		base = SH_DMAC_BASE1;
 #endif
 
@@ -43,13 +55,13 @@ static unsigned long dma_base_addr(unsigned int chan)
 {
 	unsigned long base = dma_find_base(chan);
 
-	/* Normalize offset calculation */
-	if (chan >= 9)
-		chan -= 6;
-	if (chan >= 4)
-		base += 0x10;
+	chan = (chan % SH_DMAC_NR_MD_CH) * SH_DMAC_CH_SZ;
+
+	/* DMAOR is placed inside the channel register space. Step over it. */
+	if (chan >= DMAOR)
+		base += SH_DMAC_CH_SZ;
 
-	return base + (chan * 0x10);
+	return base + chan;
 }
 
 #ifdef CONFIG_SH_DMA_IRQ_MULTI
@@ -253,12 +265,11 @@ static int sh_dmac_get_dma_residue(struct dma_channel *chan)
 #define NR_DMAOR	1
 #endif
 
-/*
- * DMAOR bases are broken out amongst channel groups. DMAOR0 manages
- * channels 0 - 5, DMAOR1 6 - 11 (optional).
- */
-#define dmaor_read_reg(n)		__raw_readw(dma_find_base((n)*6))
-#define dmaor_write_reg(n, data)	__raw_writew(data, dma_find_base(n)*6)
+#define dmaor_read_reg(n)		__raw_readw(dma_find_base((n) * \
+						    SH_DMAC_NR_MD_CH) + DMAOR)
+#define dmaor_write_reg(n, data)	__raw_writew(data, \
+						     dma_find_base((n) * \
+						     SH_DMAC_NR_MD_CH) + DMAOR)
 
 static inline int dmaor_reset(int no)
 {
diff --git a/arch/sh/include/asm/bugs.h b/arch/sh/include/asm/bugs.h
deleted file mode 100644
index 030df56bf..000000000
--- a/arch/sh/include/asm/bugs.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_BUGS_H
-#define __ASM_SH_BUGS_H
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-/*
- * I don't know of any Super-H bugs yet.
- */
-
-#include <asm/processor.h>
-
-extern void select_idle_routine(void);
-
-static void __init check_bugs(void)
-{
-	extern unsigned long loops_per_jiffy;
-	char *p = &init_utsname()->machine[2]; /* "sh" */
-
-	select_idle_routine();
-
-	current_cpu_data.loops_per_jiffy = loops_per_jiffy;
-
-	switch (current_cpu_data.family) {
-	case CPU_FAMILY_SH2:
-		*p++ = '2';
-		break;
-	case CPU_FAMILY_SH2A:
-		*p++ = '2';
-		*p++ = 'a';
-		break;
-	case CPU_FAMILY_SH3:
-		*p++ = '3';
-		break;
-	case CPU_FAMILY_SH4:
-		*p++ = '4';
-		break;
-	case CPU_FAMILY_SH4A:
-		*p++ = '4';
-		*p++ = 'a';
-		break;
-	case CPU_FAMILY_SH4AL_DSP:
-		*p++ = '4';
-		*p++ = 'a';
-		*p++ = 'l';
-		*p++ = '-';
-		*p++ = 'd';
-		*p++ = 's';
-		*p++ = 'p';
-		break;
-	case CPU_FAMILY_SH5:
-		*p++ = '6';
-		*p++ = '4';
-		break;
-	case CPU_FAMILY_UNKNOWN:
-		/*
-		 * Specifically use CPU_FAMILY_UNKNOWN rather than
-		 * default:, so we're able to have the compiler whine
-		 * about unhandled enumerations.
-		 */
-		break;
-	}
-
-	printk("CPU: %s\n", get_cpu_subtype(&current_cpu_data));
-
-#ifndef __LITTLE_ENDIAN__
-	/* 'eb' means 'Endian Big' */
-	*p++ = 'e';
-	*p++ = 'b';
-#endif
-	*p = '\0';
-}
-#endif /* __ASM_SH_BUGS_H */
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
index 6fbf8c80e..386786b15 100644
--- a/arch/sh/include/asm/processor.h
+++ b/arch/sh/include/asm/processor.h
@@ -173,6 +173,8 @@ extern unsigned int instruction_size(unsigned int insn);
 #define instruction_size(insn)	(4)
 #endif
 
+void select_idle_routine(void);
+
 #endif /* __ASSEMBLY__ */
 
 #ifdef CONFIG_SUPERH32
diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c
index a5bd03642..75dcb1d6b 100644
--- a/arch/sh/kernel/cpu/sh2/probe.c
+++ b/arch/sh/kernel/cpu/sh2/probe.c
@@ -24,7 +24,7 @@ static int __init scan_cache(unsigned long node, const char *uname,
 	if (!of_flat_dt_is_compatible(node, "jcore,cache"))
 		return 0;
 
-	j2_ccr_base = (u32 __iomem *)of_flat_dt_translate_address(node);
+	j2_ccr_base = ioremap(of_flat_dt_translate_address(node), 4);
 
 	return 1;
 }
diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c
index be616ee0c..5169309fd 100644
--- a/arch/sh/kernel/idle.c
+++ b/arch/sh/kernel/idle.c
@@ -18,6 +18,7 @@
 #include <linux/smp.h>
 #include <linux/atomic.h>
 #include <asm/pgalloc.h>
+#include <asm/processor.h>
 #include <asm/smp.h>
 #include <asm/bl_bit.h>
 
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index b2f44eb7c..8ef497062 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -42,6 +42,7 @@
 #include <asm/smp.h>
 #include <asm/mmu_context.h>
 #include <asm/mmzone.h>
+#include <asm/processor.h>
 #include <asm/sparsemem.h>
 
 /*
@@ -361,3 +362,57 @@ int test_mode_pin(int pin)
 {
 	return sh_mv.mv_mode_pins() & pin;
 }
+
+void __init arch_cpu_finalize_init(void)
+{
+	char *p = &init_utsname()->machine[2]; /* "sh" */
+
+	select_idle_routine();
+
+	current_cpu_data.loops_per_jiffy = loops_per_jiffy;
+
+	switch (current_cpu_data.family) {
+	case CPU_FAMILY_SH2:
+		*p++ = '2';
+		break;
+	case CPU_FAMILY_SH2A:
+		*p++ = '2';
+		*p++ = 'a';
+		break;
+	case CPU_FAMILY_SH3:
+		*p++ = '3';
+		break;
+	case CPU_FAMILY_SH4:
+		*p++ = '4';
+		break;
+	case CPU_FAMILY_SH4A:
+		*p++ = '4';
+		*p++ = 'a';
+		break;
+	case CPU_FAMILY_SH4AL_DSP:
+		*p++ = '4';
+		*p++ = 'a';
+		*p++ = 'l';
+		*p++ = '-';
+		*p++ = 'd';
+		*p++ = 's';
+		*p++ = 'p';
+		break;
+	case CPU_FAMILY_UNKNOWN:
+		/*
+		 * Specifically use CPU_FAMILY_UNKNOWN rather than
+		 * default:, so we're able to have the compiler whine
+		 * about unhandled enumerations.
+		 */
+		break;
+	}
+
+	pr_info("CPU: %s\n", get_cpu_subtype(&current_cpu_data));
+
+#ifndef __LITTLE_ENDIAN__
+	/* 'eb' means 'Endian Big' */
+	*p++ = 'e';
+	*p++ = 'b';
+#endif
+	*p = '\0';
+}