Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 103 insertions, 0 deletions

diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c
new file mode 100644
index 000000000..b7c0f142d
--- /dev/null
+++ b/arch/x86/kernel/reboot_fixups_32.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This is a good place to put board specific reboot fixups.
+ *
+ * List of supported fixups:
+ * geode-gx1/cs5530a - Jaya Kumar <jayalk@intworks.biz>
+ * geode-gx/lx/cs5536 - Andres Salomon <dilinger@debian.org>
+ *
+ */
+
+#include <asm/delay.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <asm/reboot_fixups.h>
+#include <asm/msr.h>
+#include <linux/cs5535.h>
+
+static void cs5530a_warm_reset(struct pci_dev *dev)
+{
+	/* writing 1 to the reset control register, 0x44 causes the
+	cs5530a to perform a system warm reset */
+	pci_write_config_byte(dev, 0x44, 0x1);
+	udelay(50); /* shouldn't get here but be safe and spin-a-while */
+	return;
+}
+
+static void cs5536_warm_reset(struct pci_dev *dev)
+{
+	/* writing 1 to the LSB of this MSR causes a hard reset */
+	wrmsrl(MSR_DIVIL_SOFT_RESET, 1ULL);
+	udelay(50); /* shouldn't get here but be safe and spin a while */
+}
+
+static void rdc321x_reset(struct pci_dev *dev)
+{
+	unsigned i;
+	/* Voluntary reset the watchdog timer */
+	outl(0x80003840, 0xCF8);
+	/* Generate a CPU reset on next tick */
+	i = inl(0xCFC);
+	/* Use the minimum timer resolution */
+	i |= 0x1600;
+	outl(i, 0xCFC);
+	outb(1, 0x92);
+}
+
+static void ce4100_reset(struct pci_dev *dev)
+{
+	int i;
+
+	for (i = 0; i < 10; i++) {
+		outb(0x2, 0xcf9);
+		udelay(50);
+	}
+}
+
+struct device_fixup {
+	unsigned int vendor;
+	unsigned int device;
+	void (*reboot_fixup)(struct pci_dev *);
+};
+
+/*
+ * PCI ids solely used for fixups_table go here
+ */
+#define PCI_DEVICE_ID_INTEL_CE4100	0x0708
+
+static const struct device_fixup fixups_table[] = {
+{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
+{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset },
+{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset },
+{ PCI_VENDOR_ID_RDC, PCI_DEVICE_ID_RDC_R6030, rdc321x_reset },
+{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100, ce4100_reset },
+};
+
+/*
+ * we see if any fixup is available for our current hardware. if there
+ * is a fixup, we call it and we expect to never return from it. if we
+ * do return, we keep looking and then eventually fall back to the
+ * standard mach_reboot on return.
+ */
+void mach_reboot_fixups(void)
+{
+	const struct device_fixup *cur;
+	struct pci_dev *dev;
+	int i;
+
+	/* we can be called from sysrq-B code. In such a case it is
+	 * prohibited to dig PCI */
+	if (in_interrupt())
+		return;
+
+	for (i=0; i < ARRAY_SIZE(fixups_table); i++) {
+		cur = &(fixups_table[i]);
+		dev = pci_get_device(cur->vendor, cur->device, NULL);
+		if (!dev)
+			continue;
+
+		cur->reboot_fixup(dev);
+		pci_dev_put(dev);
+	}
+}
+