Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 159 insertions, 0 deletions

diff --git a/arch/x86/mm/mem_encrypt_boot.S b/arch/x86/mm/mem_encrypt_boot.S
new file mode 100644
index 000000000..40a608506
--- /dev/null
+++ b/arch/x86/mm/mem_encrypt_boot.S
@@ -0,0 +1,159 @@
+/*
+ * AMD Memory Encryption Support
+ *
+ * Copyright (C) 2016 Advanced Micro Devices, Inc.
+ *
+ * Author: Tom Lendacky <thomas.lendacky@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/processor-flags.h>
+#include <asm/msr-index.h>
+#include <asm/nospec-branch.h>
+
+	.text
+	.code64
+ENTRY(sme_encrypt_execute)
+
+	/*
+	 * Entry parameters:
+	 *   RDI - virtual address for the encrypted mapping
+	 *   RSI - virtual address for the decrypted mapping
+	 *   RDX - length to encrypt
+	 *   RCX - virtual address of the encryption workarea, including:
+	 *     - stack page (PAGE_SIZE)
+	 *     - encryption routine page (PAGE_SIZE)
+	 *     - intermediate copy buffer (PMD_PAGE_SIZE)
+	 *    R8 - physcial address of the pagetables to use for encryption
+	 */
+
+	push	%rbp
+	movq	%rsp, %rbp		/* RBP now has original stack pointer */
+
+	/* Set up a one page stack in the non-encrypted memory area */
+	movq	%rcx, %rax		/* Workarea stack page */
+	leaq	PAGE_SIZE(%rax), %rsp	/* Set new stack pointer */
+	addq	$PAGE_SIZE, %rax	/* Workarea encryption routine */
+
+	push	%r12
+	movq	%rdi, %r10		/* Encrypted area */
+	movq	%rsi, %r11		/* Decrypted area */
+	movq	%rdx, %r12		/* Area length */
+
+	/* Copy encryption routine into the workarea */
+	movq	%rax, %rdi				/* Workarea encryption routine */
+	leaq	__enc_copy(%rip), %rsi			/* Encryption routine */
+	movq	$(.L__enc_copy_end - __enc_copy), %rcx	/* Encryption routine length */
+	rep	movsb
+
+	/* Setup registers for call */
+	movq	%r10, %rdi		/* Encrypted area */
+	movq	%r11, %rsi		/* Decrypted area */
+	movq	%r8, %rdx		/* Pagetables used for encryption */
+	movq	%r12, %rcx		/* Area length */
+	movq	%rax, %r8		/* Workarea encryption routine */
+	addq	$PAGE_SIZE, %r8		/* Workarea intermediate copy buffer */
+
+	ANNOTATE_RETPOLINE_SAFE
+	call	*%rax			/* Call the encryption routine */
+
+	pop	%r12
+
+	movq	%rbp, %rsp		/* Restore original stack pointer */
+	pop	%rbp
+
+	ret
+ENDPROC(sme_encrypt_execute)
+
+ENTRY(__enc_copy)
+/*
+ * Routine used to encrypt memory in place.
+ *   This routine must be run outside of the kernel proper since
+ *   the kernel will be encrypted during the process. So this
+ *   routine is defined here and then copied to an area outside
+ *   of the kernel where it will remain and run decrypted
+ *   during execution.
+ *
+ *   On entry the registers must be:
+ *     RDI - virtual address for the encrypted mapping
+ *     RSI - virtual address for the decrypted mapping
+ *     RDX - address of the pagetables to use for encryption
+ *     RCX - length of area
+ *      R8 - intermediate copy buffer
+ *
+ *     RAX - points to this routine
+ *
+ * The area will be encrypted by copying from the non-encrypted
+ * memory space to an intermediate buffer and then copying from the
+ * intermediate buffer back to the encrypted memory space. The physical
+ * addresses of the two mappings are the same which results in the area
+ * being encrypted "in place".
+ */
+	/* Enable the new page tables */
+	mov	%rdx, %cr3
+
+	/* Flush any global TLBs */
+	mov	%cr4, %rdx
+	andq	$~X86_CR4_PGE, %rdx
+	mov	%rdx, %cr4
+	orq	$X86_CR4_PGE, %rdx
+	mov	%rdx, %cr4
+
+	push	%r15
+	push	%r12
+
+	movq	%rcx, %r9		/* Save area length */
+	movq	%rdi, %r10		/* Save encrypted area address */
+	movq	%rsi, %r11		/* Save decrypted area address */
+
+	/* Set the PAT register PA5 entry to write-protect */
+	movl	$MSR_IA32_CR_PAT, %ecx
+	rdmsr
+	mov	%rdx, %r15		/* Save original PAT value */
+	andl	$0xffff00ff, %edx	/* Clear PA5 */
+	orl	$0x00000500, %edx	/* Set PA5 to WP */
+	wrmsr
+
+	wbinvd				/* Invalidate any cache entries */
+
+	/* Copy/encrypt up to 2MB at a time */
+	movq	$PMD_PAGE_SIZE, %r12
+1:
+	cmpq	%r12, %r9
+	jnb	2f
+	movq	%r9, %r12
+
+2:
+	movq	%r11, %rsi		/* Source - decrypted area */
+	movq	%r8, %rdi		/* Dest   - intermediate copy buffer */
+	movq	%r12, %rcx
+	rep	movsb
+
+	movq	%r8, %rsi		/* Source - intermediate copy buffer */
+	movq	%r10, %rdi		/* Dest   - encrypted area */
+	movq	%r12, %rcx
+	rep	movsb
+
+	addq	%r12, %r11
+	addq	%r12, %r10
+	subq	%r12, %r9		/* Kernel length decrement */
+	jnz	1b			/* Kernel length not zero? */
+
+	/* Restore PAT register */
+	movl	$MSR_IA32_CR_PAT, %ecx
+	rdmsr
+	mov	%r15, %rdx		/* Restore original PAT value */
+	wrmsr
+
+	pop	%r12
+	pop	%r15
+
+	ret
+.L__enc_copy_end:
+ENDPROC(__enc_copy)