Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 379 insertions, 0 deletions

diff --git a/drivers/block/drbd/drbd_protocol.h b/drivers/block/drbd/drbd_protocol.h
new file mode 100644
index 000000000..c3081f930
--- /dev/null
+++ b/drivers/block/drbd/drbd_protocol.h
@@ -0,0 +1,379 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DRBD_PROTOCOL_H
+#define __DRBD_PROTOCOL_H
+
+enum drbd_packet {
+	/* receiver (data socket) */
+	P_DATA		      = 0x00,
+	P_DATA_REPLY	      = 0x01, /* Response to P_DATA_REQUEST */
+	P_RS_DATA_REPLY	      = 0x02, /* Response to P_RS_DATA_REQUEST */
+	P_BARRIER	      = 0x03,
+	P_BITMAP	      = 0x04,
+	P_BECOME_SYNC_TARGET  = 0x05,
+	P_BECOME_SYNC_SOURCE  = 0x06,
+	P_UNPLUG_REMOTE	      = 0x07, /* Used at various times to hint the peer */
+	P_DATA_REQUEST	      = 0x08, /* Used to ask for a data block */
+	P_RS_DATA_REQUEST     = 0x09, /* Used to ask for a data block for resync */
+	P_SYNC_PARAM	      = 0x0a,
+	P_PROTOCOL	      = 0x0b,
+	P_UUIDS		      = 0x0c,
+	P_SIZES		      = 0x0d,
+	P_STATE		      = 0x0e,
+	P_SYNC_UUID	      = 0x0f,
+	P_AUTH_CHALLENGE      = 0x10,
+	P_AUTH_RESPONSE	      = 0x11,
+	P_STATE_CHG_REQ	      = 0x12,
+
+	/* (meta socket) */
+	P_PING		      = 0x13,
+	P_PING_ACK	      = 0x14,
+	P_RECV_ACK	      = 0x15, /* Used in protocol B */
+	P_WRITE_ACK	      = 0x16, /* Used in protocol C */
+	P_RS_WRITE_ACK	      = 0x17, /* Is a P_WRITE_ACK, additionally call set_in_sync(). */
+	P_SUPERSEDED	      = 0x18, /* Used in proto C, two-primaries conflict detection */
+	P_NEG_ACK	      = 0x19, /* Sent if local disk is unusable */
+	P_NEG_DREPLY	      = 0x1a, /* Local disk is broken... */
+	P_NEG_RS_DREPLY	      = 0x1b, /* Local disk is broken... */
+	P_BARRIER_ACK	      = 0x1c,
+	P_STATE_CHG_REPLY     = 0x1d,
+
+	/* "new" commands, no longer fitting into the ordering scheme above */
+
+	P_OV_REQUEST	      = 0x1e, /* data socket */
+	P_OV_REPLY	      = 0x1f,
+	P_OV_RESULT	      = 0x20, /* meta socket */
+	P_CSUM_RS_REQUEST     = 0x21, /* data socket */
+	P_RS_IS_IN_SYNC	      = 0x22, /* meta socket */
+	P_SYNC_PARAM89	      = 0x23, /* data socket, protocol version 89 replacement for P_SYNC_PARAM */
+	P_COMPRESSED_BITMAP   = 0x24, /* compressed or otherwise encoded bitmap transfer */
+	/* P_CKPT_FENCE_REQ      = 0x25, * currently reserved for protocol D */
+	/* P_CKPT_DISABLE_REQ    = 0x26, * currently reserved for protocol D */
+	P_DELAY_PROBE         = 0x27, /* is used on BOTH sockets */
+	P_OUT_OF_SYNC         = 0x28, /* Mark as out of sync (Outrunning), data socket */
+	P_RS_CANCEL           = 0x29, /* meta: Used to cancel RS_DATA_REQUEST packet by SyncSource */
+	P_CONN_ST_CHG_REQ     = 0x2a, /* data sock: Connection wide state request */
+	P_CONN_ST_CHG_REPLY   = 0x2b, /* meta sock: Connection side state req reply */
+	P_RETRY_WRITE	      = 0x2c, /* Protocol C: retry conflicting write request */
+	P_PROTOCOL_UPDATE     = 0x2d, /* data sock: is used in established connections */
+        /* 0x2e to 0x30 reserved, used in drbd 9 */
+
+	/* REQ_DISCARD. We used "discard" in different contexts before,
+	 * which is why I chose TRIM here, to disambiguate. */
+	P_TRIM                = 0x31,
+
+	/* Only use these two if both support FF_THIN_RESYNC */
+	P_RS_THIN_REQ         = 0x32, /* Request a block for resync or reply P_RS_DEALLOCATED */
+	P_RS_DEALLOCATED      = 0x33, /* Contains only zeros on sync source node */
+
+	/* REQ_WRITE_SAME.
+	 * On a receiving side without REQ_WRITE_SAME,
+	 * we may fall back to an opencoded loop instead. */
+	P_WSAME               = 0x34,
+
+	P_MAY_IGNORE	      = 0x100, /* Flag to test if (cmd > P_MAY_IGNORE) ... */
+	P_MAX_OPT_CMD	      = 0x101,
+
+	/* special command ids for handshake */
+
+	P_INITIAL_META	      = 0xfff1, /* First Packet on the MetaSock */
+	P_INITIAL_DATA	      = 0xfff2, /* First Packet on the Socket */
+
+	P_CONNECTION_FEATURES = 0xfffe	/* FIXED for the next century! */
+};
+
+#ifndef __packed
+#define __packed __attribute__((packed))
+#endif
+
+/* This is the layout for a packet on the wire.
+ * The byteorder is the network byte order.
+ *     (except block_id and barrier fields.
+ *	these are pointers to local structs
+ *	and have no relevance for the partner,
+ *	which just echoes them as received.)
+ *
+ * NOTE that the payload starts at a long aligned offset,
+ * regardless of 32 or 64 bit arch!
+ */
+struct p_header80 {
+	u32	  magic;
+	u16	  command;
+	u16	  length;	/* bytes of data after this header */
+} __packed;
+
+/* Header for big packets, Used for data packets exceeding 64kB */
+struct p_header95 {
+	u16	  magic;	/* use DRBD_MAGIC_BIG here */
+	u16	  command;
+	u32	  length;
+} __packed;
+
+struct p_header100 {
+	u32	  magic;
+	u16	  volume;
+	u16	  command;
+	u32	  length;
+	u32	  pad;
+} __packed;
+
+/* These defines must not be changed without changing the protocol version.
+ * New defines may only be introduced together with protocol version bump or
+ * new protocol feature flags.
+ */
+#define DP_HARDBARRIER	      1 /* no longer used */
+#define DP_RW_SYNC	      2 /* equals REQ_SYNC    */
+#define DP_MAY_SET_IN_SYNC    4
+#define DP_UNPLUG             8 /* not used anymore   */
+#define DP_FUA               16 /* equals REQ_FUA     */
+#define DP_FLUSH             32 /* equals REQ_PREFLUSH   */
+#define DP_DISCARD           64 /* equals REQ_DISCARD */
+#define DP_SEND_RECEIVE_ACK 128 /* This is a proto B write request */
+#define DP_SEND_WRITE_ACK   256 /* This is a proto C write request */
+#define DP_WSAME            512 /* equiv. REQ_WRITE_SAME */
+
+struct p_data {
+	u64	    sector;    /* 64 bits sector number */
+	u64	    block_id;  /* to identify the request in protocol B&C */
+	u32	    seq_num;
+	u32	    dp_flags;
+} __packed;
+
+struct p_trim {
+	struct p_data p_data;
+	u32	    size;	/* == bio->bi_size */
+} __packed;
+
+struct p_wsame {
+	struct p_data p_data;
+	u32           size;     /* == bio->bi_size */
+} __packed;
+
+/*
+ * commands which share a struct:
+ *  p_block_ack:
+ *   P_RECV_ACK (proto B), P_WRITE_ACK (proto C),
+ *   P_SUPERSEDED (proto C, two-primaries conflict detection)
+ *  p_block_req:
+ *   P_DATA_REQUEST, P_RS_DATA_REQUEST
+ */
+struct p_block_ack {
+	u64	    sector;
+	u64	    block_id;
+	u32	    blksize;
+	u32	    seq_num;
+} __packed;
+
+struct p_block_req {
+	u64 sector;
+	u64 block_id;
+	u32 blksize;
+	u32 pad;	/* to multiple of 8 Byte */
+} __packed;
+
+/*
+ * commands with their own struct for additional fields:
+ *   P_CONNECTION_FEATURES
+ *   P_BARRIER
+ *   P_BARRIER_ACK
+ *   P_SYNC_PARAM
+ *   ReportParams
+ */
+
+/* supports TRIM/DISCARD on the "wire" protocol */
+#define DRBD_FF_TRIM 1
+
+/* Detect all-zeros during resync, and rather TRIM/UNMAP/DISCARD those blocks
+ * instead of fully allocate a supposedly thin volume on initial resync */
+#define DRBD_FF_THIN_RESYNC 2
+
+/* supports REQ_WRITE_SAME on the "wire" protocol.
+ * Note: this flag is overloaded,
+ * its presence also
+ *   - indicates support for 128 MiB "batch bios",
+ *     max discard size of 128 MiB
+ *     instead of 4M before that.
+ *   - indicates that we exchange additional settings in p_sizes
+ *     drbd_send_sizes()/receive_sizes()
+ */
+#define DRBD_FF_WSAME 4
+
+struct p_connection_features {
+	u32 protocol_min;
+	u32 feature_flags;
+	u32 protocol_max;
+
+	/* should be more than enough for future enhancements
+	 * for now, feature_flags and the reserved array shall be zero.
+	 */
+
+	u32 _pad;
+	u64 reserved[7];
+} __packed;
+
+struct p_barrier {
+	u32 barrier;	/* barrier number _handle_ only */
+	u32 pad;	/* to multiple of 8 Byte */
+} __packed;
+
+struct p_barrier_ack {
+	u32 barrier;
+	u32 set_size;
+} __packed;
+
+struct p_rs_param {
+	u32 resync_rate;
+
+	      /* Since protocol version 88 and higher. */
+	char verify_alg[0];
+} __packed;
+
+struct p_rs_param_89 {
+	u32 resync_rate;
+	/* protocol version 89: */
+	char verify_alg[SHARED_SECRET_MAX];
+	char csums_alg[SHARED_SECRET_MAX];
+} __packed;
+
+struct p_rs_param_95 {
+	u32 resync_rate;
+	char verify_alg[SHARED_SECRET_MAX];
+	char csums_alg[SHARED_SECRET_MAX];
+	u32 c_plan_ahead;
+	u32 c_delay_target;
+	u32 c_fill_target;
+	u32 c_max_rate;
+} __packed;
+
+enum drbd_conn_flags {
+	CF_DISCARD_MY_DATA = 1,
+	CF_DRY_RUN = 2,
+};
+
+struct p_protocol {
+	u32 protocol;
+	u32 after_sb_0p;
+	u32 after_sb_1p;
+	u32 after_sb_2p;
+	u32 conn_flags;
+	u32 two_primaries;
+
+	/* Since protocol version 87 and higher. */
+	char integrity_alg[0];
+
+} __packed;
+
+struct p_uuids {
+	u64 uuid[UI_EXTENDED_SIZE];
+} __packed;
+
+struct p_rs_uuid {
+	u64	    uuid;
+} __packed;
+
+/* optional queue_limits if (agreed_features & DRBD_FF_WSAME)
+ * see also struct queue_limits, as of late 2015 */
+struct o_qlim {
+	/* we don't need it yet, but we may as well communicate it now */
+	u32 physical_block_size;
+
+	/* so the original in struct queue_limits is unsigned short,
+	 * but I'd have to put in padding anyways. */
+	u32 logical_block_size;
+
+	/* One incoming bio becomes one DRBD request,
+	 * which may be translated to several bio on the receiving side.
+	 * We don't need to communicate chunk/boundary/segment ... limits.
+	 */
+
+	/* various IO hints may be useful with "diskless client" setups */
+	u32 alignment_offset;
+	u32 io_min;
+	u32 io_opt;
+
+	/* We may need to communicate integrity stuff at some point,
+	 * but let's not get ahead of ourselves. */
+
+	/* Backend discard capabilities.
+	 * Receiving side uses "blkdev_issue_discard()", no need to communicate
+	 * more specifics.  If the backend cannot do discards, the DRBD peer
+	 * may fall back to blkdev_issue_zeroout().
+	 */
+	u8 discard_enabled;
+	u8 discard_zeroes_data;
+	u8 write_same_capable;
+	u8 _pad;
+} __packed;
+
+struct p_sizes {
+	u64	    d_size;  /* size of disk */
+	u64	    u_size;  /* user requested size */
+	u64	    c_size;  /* current exported size */
+	u32	    max_bio_size;  /* Maximal size of a BIO */
+	u16	    queue_order_type;  /* not yet implemented in DRBD*/
+	u16	    dds_flags; /* use enum dds_flags here. */
+
+	/* optional queue_limits if (agreed_features & DRBD_FF_WSAME) */
+	struct o_qlim qlim[0];
+} __packed;
+
+struct p_state {
+	u32	    state;
+} __packed;
+
+struct p_req_state {
+	u32	    mask;
+	u32	    val;
+} __packed;
+
+struct p_req_state_reply {
+	u32	    retcode;
+} __packed;
+
+struct p_drbd06_param {
+	u64	  size;
+	u32	  state;
+	u32	  blksize;
+	u32	  protocol;
+	u32	  version;
+	u32	  gen_cnt[5];
+	u32	  bit_map_gen[5];
+} __packed;
+
+struct p_block_desc {
+	u64 sector;
+	u32 blksize;
+	u32 pad;	/* to multiple of 8 Byte */
+} __packed;
+
+/* Valid values for the encoding field.
+ * Bump proto version when changing this. */
+enum drbd_bitmap_code {
+	/* RLE_VLI_Bytes = 0,
+	 * and other bit variants had been defined during
+	 * algorithm evaluation. */
+	RLE_VLI_Bits = 2,
+};
+
+struct p_compressed_bm {
+	/* (encoding & 0x0f): actual encoding, see enum drbd_bitmap_code
+	 * (encoding & 0x80): polarity (set/unset) of first runlength
+	 * ((encoding >> 4) & 0x07): pad_bits, number of trailing zero bits
+	 * used to pad up to head.length bytes
+	 */
+	u8 encoding;
+
+	u8 code[0];
+} __packed;
+
+struct p_delay_probe93 {
+	u32     seq_num; /* sequence number to match the two probe packets */
+	u32     offset;  /* usecs the probe got sent after the reference time point */
+} __packed;
+
+/*
+ * Bitmap packets need to fit within a single page on the sender and receiver,
+ * so we are limited to 4 KiB (and not to PAGE_SIZE, which can be bigger).
+ */
+#define DRBD_SOCKET_BUFFER_SIZE 4096
+
+#endif  /* __DRBD_PROTOCOL_H */