Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1266 insertions, 0 deletions

diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
new file mode 100644
index 000000000..e9228520e
--- /dev/null
+++ b/drivers/bluetooth/hci_intel.c
@@ -0,0 +1,1266 @@
+/*
+ *
+ *  Bluetooth HCI UART driver for Intel devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/wait.h>
+#include <linux/tty.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/acpi.h>
+#include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+#include "btintel.h"
+
+#define STATE_BOOTLOADER	0
+#define STATE_DOWNLOADING	1
+#define STATE_FIRMWARE_LOADED	2
+#define STATE_FIRMWARE_FAILED	3
+#define STATE_BOOTING		4
+#define STATE_LPM_ENABLED	5
+#define STATE_TX_ACTIVE		6
+#define STATE_SUSPENDED		7
+#define STATE_LPM_TRANSACTION	8
+
+#define HCI_LPM_WAKE_PKT 0xf0
+#define HCI_LPM_PKT 0xf1
+#define HCI_LPM_MAX_SIZE 10
+#define HCI_LPM_HDR_SIZE HCI_EVENT_HDR_SIZE
+
+#define LPM_OP_TX_NOTIFY 0x00
+#define LPM_OP_SUSPEND_ACK 0x02
+#define LPM_OP_RESUME_ACK 0x03
+
+#define LPM_SUSPEND_DELAY_MS 1000
+
+struct hci_lpm_pkt {
+	__u8 opcode;
+	__u8 dlen;
+	__u8 data[0];
+} __packed;
+
+struct intel_device {
+	struct list_head list;
+	struct platform_device *pdev;
+	struct gpio_desc *reset;
+	struct hci_uart *hu;
+	struct mutex hu_lock;
+	int irq;
+};
+
+static LIST_HEAD(intel_device_list);
+static DEFINE_MUTEX(intel_device_list_lock);
+
+struct intel_data {
+	struct sk_buff *rx_skb;
+	struct sk_buff_head txq;
+	struct work_struct busy_work;
+	struct hci_uart *hu;
+	unsigned long flags;
+};
+
+static u8 intel_convert_speed(unsigned int speed)
+{
+	switch (speed) {
+	case 9600:
+		return 0x00;
+	case 19200:
+		return 0x01;
+	case 38400:
+		return 0x02;
+	case 57600:
+		return 0x03;
+	case 115200:
+		return 0x04;
+	case 230400:
+		return 0x05;
+	case 460800:
+		return 0x06;
+	case 921600:
+		return 0x07;
+	case 1843200:
+		return 0x08;
+	case 3250000:
+		return 0x09;
+	case 2000000:
+		return 0x0a;
+	case 3000000:
+		return 0x0b;
+	default:
+		return 0xff;
+	}
+}
+
+static int intel_wait_booting(struct hci_uart *hu)
+{
+	struct intel_data *intel = hu->priv;
+	int err;
+
+	err = wait_on_bit_timeout(&intel->flags, STATE_BOOTING,
+				  TASK_INTERRUPTIBLE,
+				  msecs_to_jiffies(1000));
+
+	if (err == -EINTR) {
+		bt_dev_err(hu->hdev, "Device boot interrupted");
+		return -EINTR;
+	}
+
+	if (err) {
+		bt_dev_err(hu->hdev, "Device boot timeout");
+		return -ETIMEDOUT;
+	}
+
+	return err;
+}
+
+#ifdef CONFIG_PM
+static int intel_wait_lpm_transaction(struct hci_uart *hu)
+{
+	struct intel_data *intel = hu->priv;
+	int err;
+
+	err = wait_on_bit_timeout(&intel->flags, STATE_LPM_TRANSACTION,
+				  TASK_INTERRUPTIBLE,
+				  msecs_to_jiffies(1000));
+
+	if (err == -EINTR) {
+		bt_dev_err(hu->hdev, "LPM transaction interrupted");
+		return -EINTR;
+	}
+
+	if (err) {
+		bt_dev_err(hu->hdev, "LPM transaction timeout");
+		return -ETIMEDOUT;
+	}
+
+	return err;
+}
+
+static int intel_lpm_suspend(struct hci_uart *hu)
+{
+	static const u8 suspend[] = { 0x01, 0x01, 0x01 };
+	struct intel_data *intel = hu->priv;
+	struct sk_buff *skb;
+
+	if (!test_bit(STATE_LPM_ENABLED, &intel->flags) ||
+	    test_bit(STATE_SUSPENDED, &intel->flags))
+		return 0;
+
+	if (test_bit(STATE_TX_ACTIVE, &intel->flags))
+		return -EAGAIN;
+
+	bt_dev_dbg(hu->hdev, "Suspending");
+
+	skb = bt_skb_alloc(sizeof(suspend), GFP_KERNEL);
+	if (!skb) {
+		bt_dev_err(hu->hdev, "Failed to alloc memory for LPM packet");
+		return -ENOMEM;
+	}
+
+	skb_put_data(skb, suspend, sizeof(suspend));
+	hci_skb_pkt_type(skb) = HCI_LPM_PKT;
+
+	set_bit(STATE_LPM_TRANSACTION, &intel->flags);
+
+	/* LPM flow is a priority, enqueue packet at list head */
+	skb_queue_head(&intel->txq, skb);
+	hci_uart_tx_wakeup(hu);
+
+	intel_wait_lpm_transaction(hu);
+	/* Even in case of failure, continue and test the suspended flag */
+
+	clear_bit(STATE_LPM_TRANSACTION, &intel->flags);
+
+	if (!test_bit(STATE_SUSPENDED, &intel->flags)) {
+		bt_dev_err(hu->hdev, "Device suspend error");
+		return -EINVAL;
+	}
+
+	bt_dev_dbg(hu->hdev, "Suspended");
+
+	hci_uart_set_flow_control(hu, true);
+
+	return 0;
+}
+
+static int intel_lpm_resume(struct hci_uart *hu)
+{
+	struct intel_data *intel = hu->priv;
+	struct sk_buff *skb;
+
+	if (!test_bit(STATE_LPM_ENABLED, &intel->flags) ||
+	    !test_bit(STATE_SUSPENDED, &intel->flags))
+		return 0;
+
+	bt_dev_dbg(hu->hdev, "Resuming");
+
+	hci_uart_set_flow_control(hu, false);
+
+	skb = bt_skb_alloc(0, GFP_KERNEL);
+	if (!skb) {
+		bt_dev_err(hu->hdev, "Failed to alloc memory for LPM packet");
+		return -ENOMEM;
+	}
+
+	hci_skb_pkt_type(skb) = HCI_LPM_WAKE_PKT;
+
+	set_bit(STATE_LPM_TRANSACTION, &intel->flags);
+
+	/* LPM flow is a priority, enqueue packet at list head */
+	skb_queue_head(&intel->txq, skb);
+	hci_uart_tx_wakeup(hu);
+
+	intel_wait_lpm_transaction(hu);
+	/* Even in case of failure, continue and test the suspended flag */
+
+	clear_bit(STATE_LPM_TRANSACTION, &intel->flags);
+
+	if (test_bit(STATE_SUSPENDED, &intel->flags)) {
+		bt_dev_err(hu->hdev, "Device resume error");
+		return -EINVAL;
+	}
+
+	bt_dev_dbg(hu->hdev, "Resumed");
+
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+static int intel_lpm_host_wake(struct hci_uart *hu)
+{
+	static const u8 lpm_resume_ack[] = { LPM_OP_RESUME_ACK, 0x00 };
+	struct intel_data *intel = hu->priv;
+	struct sk_buff *skb;
+
+	hci_uart_set_flow_control(hu, false);
+
+	clear_bit(STATE_SUSPENDED, &intel->flags);
+
+	skb = bt_skb_alloc(sizeof(lpm_resume_ack), GFP_KERNEL);
+	if (!skb) {
+		bt_dev_err(hu->hdev, "Failed to alloc memory for LPM packet");
+		return -ENOMEM;
+	}
+
+	skb_put_data(skb, lpm_resume_ack, sizeof(lpm_resume_ack));
+	hci_skb_pkt_type(skb) = HCI_LPM_PKT;
+
+	/* LPM flow is a priority, enqueue packet at list head */
+	skb_queue_head(&intel->txq, skb);
+	hci_uart_tx_wakeup(hu);
+
+	bt_dev_dbg(hu->hdev, "Resumed by controller");
+
+	return 0;
+}
+
+static irqreturn_t intel_irq(int irq, void *dev_id)
+{
+	struct intel_device *idev = dev_id;
+
+	dev_info(&idev->pdev->dev, "hci_intel irq\n");
+
+	mutex_lock(&idev->hu_lock);
+	if (idev->hu)
+		intel_lpm_host_wake(idev->hu);
+	mutex_unlock(&idev->hu_lock);
+
+	/* Host/Controller are now LPM resumed, trigger a new delayed suspend */
+	pm_runtime_get(&idev->pdev->dev);
+	pm_runtime_mark_last_busy(&idev->pdev->dev);
+	pm_runtime_put_autosuspend(&idev->pdev->dev);
+
+	return IRQ_HANDLED;
+}
+
+static int intel_set_power(struct hci_uart *hu, bool powered)
+{
+	struct list_head *p;
+	int err = -ENODEV;
+
+	if (!hu->tty->dev)
+		return err;
+
+	mutex_lock(&intel_device_list_lock);
+
+	list_for_each(p, &intel_device_list) {
+		struct intel_device *idev = list_entry(p, struct intel_device,
+						       list);
+
+		/* tty device and pdev device should share the same parent
+		 * which is the UART port.
+		 */
+		if (hu->tty->dev->parent != idev->pdev->dev.parent)
+			continue;
+
+		if (!idev->reset) {
+			err = -ENOTSUPP;
+			break;
+		}
+
+		BT_INFO("hu %p, Switching compatible pm device (%s) to %u",
+			hu, dev_name(&idev->pdev->dev), powered);
+
+		gpiod_set_value(idev->reset, powered);
+
+		/* Provide to idev a hu reference which is used to run LPM
+		 * transactions (lpm suspend/resume) from PM callbacks.
+		 * hu needs to be protected against concurrent removing during
+		 * these PM ops.
+		 */
+		mutex_lock(&idev->hu_lock);
+		idev->hu = powered ? hu : NULL;
+		mutex_unlock(&idev->hu_lock);
+
+		if (idev->irq < 0)
+			break;
+
+		if (powered && device_can_wakeup(&idev->pdev->dev)) {
+			err = devm_request_threaded_irq(&idev->pdev->dev,
+							idev->irq, NULL,
+							intel_irq,
+							IRQF_ONESHOT,
+							"bt-host-wake", idev);
+			if (err) {
+				BT_ERR("hu %p, unable to allocate irq-%d",
+				       hu, idev->irq);
+				break;
+			}
+
+			device_wakeup_enable(&idev->pdev->dev);
+
+			pm_runtime_set_active(&idev->pdev->dev);
+			pm_runtime_use_autosuspend(&idev->pdev->dev);
+			pm_runtime_set_autosuspend_delay(&idev->pdev->dev,
+							 LPM_SUSPEND_DELAY_MS);
+			pm_runtime_enable(&idev->pdev->dev);
+		} else if (!powered && device_may_wakeup(&idev->pdev->dev)) {
+			devm_free_irq(&idev->pdev->dev, idev->irq, idev);
+			device_wakeup_disable(&idev->pdev->dev);
+
+			pm_runtime_disable(&idev->pdev->dev);
+		}
+	}
+
+	mutex_unlock(&intel_device_list_lock);
+
+	return err;
+}
+
+static void intel_busy_work(struct work_struct *work)
+{
+	struct list_head *p;
+	struct intel_data *intel = container_of(work, struct intel_data,
+						busy_work);
+
+	if (!intel->hu->tty->dev)
+		return;
+
+	/* Link is busy, delay the suspend */
+	mutex_lock(&intel_device_list_lock);
+	list_for_each(p, &intel_device_list) {
+		struct intel_device *idev = list_entry(p, struct intel_device,
+						       list);
+
+		if (intel->hu->tty->dev->parent == idev->pdev->dev.parent) {
+			pm_runtime_get(&idev->pdev->dev);
+			pm_runtime_mark_last_busy(&idev->pdev->dev);
+			pm_runtime_put_autosuspend(&idev->pdev->dev);
+			break;
+		}
+	}
+	mutex_unlock(&intel_device_list_lock);
+}
+
+static int intel_open(struct hci_uart *hu)
+{
+	struct intel_data *intel;
+
+	BT_DBG("hu %p", hu);
+
+	if (!hci_uart_has_flow_control(hu))
+		return -EOPNOTSUPP;
+
+	intel = kzalloc(sizeof(*intel), GFP_KERNEL);
+	if (!intel)
+		return -ENOMEM;
+
+	skb_queue_head_init(&intel->txq);
+	INIT_WORK(&intel->busy_work, intel_busy_work);
+
+	intel->hu = hu;
+
+	hu->priv = intel;
+
+	if (!intel_set_power(hu, true))
+		set_bit(STATE_BOOTING, &intel->flags);
+
+	return 0;
+}
+
+static int intel_close(struct hci_uart *hu)
+{
+	struct intel_data *intel = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	cancel_work_sync(&intel->busy_work);
+
+	intel_set_power(hu, false);
+
+	skb_queue_purge(&intel->txq);
+	kfree_skb(intel->rx_skb);
+	kfree(intel);
+
+	hu->priv = NULL;
+	return 0;
+}
+
+static int intel_flush(struct hci_uart *hu)
+{
+	struct intel_data *intel = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	skb_queue_purge(&intel->txq);
+
+	return 0;
+}
+
+static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
+{
+	struct sk_buff *skb;
+	struct hci_event_hdr *hdr;
+	struct hci_ev_cmd_complete *evt;
+
+	skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	hdr = skb_put(skb, sizeof(*hdr));
+	hdr->evt = HCI_EV_CMD_COMPLETE;
+	hdr->plen = sizeof(*evt) + 1;
+
+	evt = skb_put(skb, sizeof(*evt));
+	evt->ncmd = 0x01;
+	evt->opcode = cpu_to_le16(opcode);
+
+	skb_put_u8(skb, 0x00);
+
+	hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
+
+	return hci_recv_frame(hdev, skb);
+}
+
+static int intel_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+	struct intel_data *intel = hu->priv;
+	struct hci_dev *hdev = hu->hdev;
+	u8 speed_cmd[] = { 0x06, 0xfc, 0x01, 0x00 };
+	struct sk_buff *skb;
+	int err;
+
+	/* This can be the first command sent to the chip, check
+	 * that the controller is ready.
+	 */
+	err = intel_wait_booting(hu);
+
+	clear_bit(STATE_BOOTING, &intel->flags);
+
+	/* In case of timeout, try to continue anyway */
+	if (err && err != -ETIMEDOUT)
+		return err;
+
+	bt_dev_info(hdev, "Change controller speed to %d", speed);
+
+	speed_cmd[3] = intel_convert_speed(speed);
+	if (speed_cmd[3] == 0xff) {
+		bt_dev_err(hdev, "Unsupported speed");
+		return -EINVAL;
+	}
+
+	/* Device will not accept speed change if Intel version has not been
+	 * previously requested.
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+	skb = bt_skb_alloc(sizeof(speed_cmd), GFP_KERNEL);
+	if (!skb) {
+		bt_dev_err(hdev, "Failed to alloc memory for baudrate packet");
+		return -ENOMEM;
+	}
+
+	skb_put_data(skb, speed_cmd, sizeof(speed_cmd));
+	hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
+
+	hci_uart_set_flow_control(hu, true);
+
+	skb_queue_tail(&intel->txq, skb);
+	hci_uart_tx_wakeup(hu);
+
+	/* wait 100ms to change baudrate on controller side */
+	msleep(100);
+
+	hci_uart_set_baudrate(hu, speed);
+	hci_uart_set_flow_control(hu, false);
+
+	return 0;
+}
+
+static int intel_setup(struct hci_uart *hu)
+{
+	struct intel_data *intel = hu->priv;
+	struct hci_dev *hdev = hu->hdev;
+	struct sk_buff *skb;
+	struct intel_version ver;
+	struct intel_boot_params params;
+	struct list_head *p;
+	const struct firmware *fw;
+	char fwname[64];
+	u32 boot_param;
+	ktime_t calltime, delta, rettime;
+	unsigned long long duration;
+	unsigned int init_speed, oper_speed;
+	int speed_change = 0;
+	int err;
+
+	bt_dev_dbg(hdev, "start intel_setup");
+
+	hu->hdev->set_diag = btintel_set_diag;
+	hu->hdev->set_bdaddr = btintel_set_bdaddr;
+
+	/* Set the default boot parameter to 0x0 and it is updated to
+	 * SKU specific boot parameter after reading Intel_Write_Boot_Params
+	 * command while downloading the firmware.
+	 */
+	boot_param = 0x00000000;
+
+	calltime = ktime_get();
+
+	if (hu->init_speed)
+		init_speed = hu->init_speed;
+	else
+		init_speed = hu->proto->init_speed;
+
+	if (hu->oper_speed)
+		oper_speed = hu->oper_speed;
+	else
+		oper_speed = hu->proto->oper_speed;
+
+	if (oper_speed && init_speed && oper_speed != init_speed)
+		speed_change = 1;
+
+	/* Check that the controller is ready */
+	err = intel_wait_booting(hu);
+
+	clear_bit(STATE_BOOTING, &intel->flags);
+
+	/* In case of timeout, try to continue anyway */
+	if (err && err != -ETIMEDOUT)
+		return err;
+
+	set_bit(STATE_BOOTLOADER, &intel->flags);
+
+	/* Read the Intel version information to determine if the device
+	 * is in bootloader mode or if it already has operational firmware
+	 * loaded.
+	 */
+	 err = btintel_read_version(hdev, &ver);
+	 if (err)
+		return err;
+
+	/* The hardware platform number has a fixed value of 0x37 and
+	 * for now only accept this single value.
+	 */
+	if (ver.hw_platform != 0x37) {
+		bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)",
+			   ver.hw_platform);
+		return -EINVAL;
+	}
+
+        /* Check for supported iBT hardware variants of this firmware
+         * loading method.
+         *
+         * This check has been put in place to ensure correct forward
+         * compatibility options when newer hardware variants come along.
+         */
+	switch (ver.hw_variant) {
+	case 0x0b:	/* LnP */
+	case 0x0c:	/* WsP */
+	case 0x12:	/* ThP */
+		break;
+	default:
+		bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
+			   ver.hw_variant);
+		return -EINVAL;
+	}
+
+	btintel_version_info(hdev, &ver);
+
+	/* The firmware variant determines if the device is in bootloader
+	 * mode or is running operational firmware. The value 0x06 identifies
+	 * the bootloader and the value 0x23 identifies the operational
+	 * firmware.
+	 *
+	 * When the operational firmware is already present, then only
+	 * the check for valid Bluetooth device address is needed. This
+	 * determines if the device will be added as configured or
+	 * unconfigured controller.
+	 *
+	 * It is not possible to use the Secure Boot Parameters in this
+	 * case since that command is only available in bootloader mode.
+	 */
+	if (ver.fw_variant == 0x23) {
+		clear_bit(STATE_BOOTLOADER, &intel->flags);
+		btintel_check_bdaddr(hdev);
+		return 0;
+	}
+
+	/* If the device is not in bootloader mode, then the only possible
+	 * choice is to return an error and abort the device initialization.
+	 */
+	if (ver.fw_variant != 0x06) {
+		bt_dev_err(hdev, "Unsupported Intel firmware variant (%u)",
+			   ver.fw_variant);
+		return -ENODEV;
+	}
+
+	/* Read the secure boot parameters to identify the operating
+	 * details of the bootloader.
+	 */
+	err = btintel_read_boot_params(hdev, &params);
+	if (err)
+		return err;
+
+	/* It is required that every single firmware fragment is acknowledged
+	 * with a command complete event. If the boot parameters indicate
+	 * that this bootloader does not send them, then abort the setup.
+	 */
+	if (params.limited_cce != 0x00) {
+		bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)",
+			   params.limited_cce);
+		return -EINVAL;
+	}
+
+	/* If the OTP has no valid Bluetooth device address, then there will
+	 * also be no valid address for the operational firmware.
+	 */
+	if (!bacmp(&params.otp_bdaddr, BDADDR_ANY)) {
+		bt_dev_info(hdev, "No device address configured");
+		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+	}
+
+	/* With this Intel bootloader only the hardware variant and device
+	 * revision information are used to select the right firmware for SfP
+	 * and WsP.
+	 *
+	 * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi.
+	 *
+	 * Currently the supported hardware variants are:
+	 *   11 (0x0b) for iBT 3.0 (LnP/SfP)
+	 *   12 (0x0c) for iBT 3.5 (WsP)
+	 *
+	 * For ThP/JfP and for future SKU's, the FW name varies based on HW
+	 * variant, HW revision and FW revision, as these are dependent on CNVi
+	 * and RF Combination.
+	 *
+	 *   18 (0x12) for iBT3.5 (ThP/JfP)
+	 *
+	 * The firmware file name for these will be
+	 * ibt-<hw_variant>-<hw_revision>-<fw_revision>.sfi.
+	 *
+	 */
+	switch (ver.hw_variant) {
+	case 0x0b:      /* SfP */
+	case 0x0c:      /* WsP */
+		snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.sfi",
+			 le16_to_cpu(ver.hw_variant),
+			 le16_to_cpu(params.dev_revid));
+		break;
+	case 0x12:      /* ThP */
+		snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u-%u.sfi",
+			 le16_to_cpu(ver.hw_variant),
+			 le16_to_cpu(ver.hw_revision),
+			 le16_to_cpu(ver.fw_revision));
+		break;
+	default:
+		bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
+			   ver.hw_variant);
+		return -EINVAL;
+	}
+
+	err = request_firmware(&fw, fwname, &hdev->dev);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to load Intel firmware file (%d)",
+			   err);
+		return err;
+	}
+
+	bt_dev_info(hdev, "Found device firmware: %s", fwname);
+
+	/* Save the DDC file name for later */
+	switch (ver.hw_variant) {
+	case 0x0b:      /* SfP */
+	case 0x0c:      /* WsP */
+		snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.ddc",
+			 le16_to_cpu(ver.hw_variant),
+			 le16_to_cpu(params.dev_revid));
+		break;
+	case 0x12:      /* ThP */
+		snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u-%u.ddc",
+			 le16_to_cpu(ver.hw_variant),
+			 le16_to_cpu(ver.hw_revision),
+			 le16_to_cpu(ver.fw_revision));
+		break;
+	default:
+		bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
+			   ver.hw_variant);
+		return -EINVAL;
+	}
+
+	if (fw->size < 644) {
+		bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
+			   fw->size);
+		err = -EBADF;
+		goto done;
+	}
+
+	set_bit(STATE_DOWNLOADING, &intel->flags);
+
+	/* Start firmware downloading and get boot parameter */
+	err = btintel_download_firmware(hdev, fw, &boot_param);
+	if (err < 0)
+		goto done;
+
+	set_bit(STATE_FIRMWARE_LOADED, &intel->flags);
+
+	bt_dev_info(hdev, "Waiting for firmware download to complete");
+
+	/* Before switching the device into operational mode and with that
+	 * booting the loaded firmware, wait for the bootloader notification
+	 * that all fragments have been successfully received.
+	 *
+	 * When the event processing receives the notification, then the
+	 * STATE_DOWNLOADING flag will be cleared.
+	 *
+	 * The firmware loading should not take longer than 5 seconds
+	 * and thus just timeout if that happens and fail the setup
+	 * of this device.
+	 */
+	err = wait_on_bit_timeout(&intel->flags, STATE_DOWNLOADING,
+				  TASK_INTERRUPTIBLE,
+				  msecs_to_jiffies(5000));
+	if (err == -EINTR) {
+		bt_dev_err(hdev, "Firmware loading interrupted");
+		err = -EINTR;
+		goto done;
+	}
+
+	if (err) {
+		bt_dev_err(hdev, "Firmware loading timeout");
+		err = -ETIMEDOUT;
+		goto done;
+	}
+
+	if (test_bit(STATE_FIRMWARE_FAILED, &intel->flags)) {
+		bt_dev_err(hdev, "Firmware loading failed");
+		err = -ENOEXEC;
+		goto done;
+	}
+
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+	bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
+
+done:
+	release_firmware(fw);
+
+	if (err < 0)
+		return err;
+
+	/* We need to restore the default speed before Intel reset */
+	if (speed_change) {
+		err = intel_set_baudrate(hu, init_speed);
+		if (err)
+			return err;
+	}
+
+	calltime = ktime_get();
+
+	set_bit(STATE_BOOTING, &intel->flags);
+
+	err = btintel_send_intel_reset(hdev, boot_param);
+	if (err)
+		return err;
+
+	/* The bootloader will not indicate when the device is ready. This
+	 * is done by the operational firmware sending bootup notification.
+	 *
+	 * Booting into operational firmware should not take longer than
+	 * 1 second. However if that happens, then just fail the setup
+	 * since something went wrong.
+	 */
+	bt_dev_info(hdev, "Waiting for device to boot");
+
+	err = intel_wait_booting(hu);
+	if (err)
+		return err;
+
+	clear_bit(STATE_BOOTING, &intel->flags);
+
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+	bt_dev_info(hdev, "Device booted in %llu usecs", duration);
+
+	/* Enable LPM if matching pdev with wakeup enabled, set TX active
+	 * until further LPM TX notification.
+	 */
+	mutex_lock(&intel_device_list_lock);
+	list_for_each(p, &intel_device_list) {
+		struct intel_device *dev = list_entry(p, struct intel_device,
+						      list);
+		if (!hu->tty->dev)
+			break;
+		if (hu->tty->dev->parent == dev->pdev->dev.parent) {
+			if (device_may_wakeup(&dev->pdev->dev)) {
+				set_bit(STATE_LPM_ENABLED, &intel->flags);
+				set_bit(STATE_TX_ACTIVE, &intel->flags);
+			}
+			break;
+		}
+	}
+	mutex_unlock(&intel_device_list_lock);
+
+	/* Ignore errors, device can work without DDC parameters */
+	btintel_load_ddc_config(hdev, fwname);
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+	kfree_skb(skb);
+
+	if (speed_change) {
+		err = intel_set_baudrate(hu, oper_speed);
+		if (err)
+			return err;
+	}
+
+	bt_dev_info(hdev, "Setup complete");
+
+	clear_bit(STATE_BOOTLOADER, &intel->flags);
+
+	return 0;
+}
+
+static int intel_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct intel_data *intel = hu->priv;
+	struct hci_event_hdr *hdr;
+
+	if (!test_bit(STATE_BOOTLOADER, &intel->flags) &&
+	    !test_bit(STATE_BOOTING, &intel->flags))
+		goto recv;
+
+	hdr = (void *)skb->data;
+
+	/* When the firmware loading completes the device sends
+	 * out a vendor specific event indicating the result of
+	 * the firmware loading.
+	 */
+	if (skb->len == 7 && hdr->evt == 0xff && hdr->plen == 0x05 &&
+	    skb->data[2] == 0x06) {
+		if (skb->data[3] != 0x00)
+			set_bit(STATE_FIRMWARE_FAILED, &intel->flags);
+
+		if (test_and_clear_bit(STATE_DOWNLOADING, &intel->flags) &&
+		    test_bit(STATE_FIRMWARE_LOADED, &intel->flags)) {
+			smp_mb__after_atomic();
+			wake_up_bit(&intel->flags, STATE_DOWNLOADING);
+		}
+
+	/* When switching to the operational firmware the device
+	 * sends a vendor specific event indicating that the bootup
+	 * completed.
+	 */
+	} else if (skb->len == 9 && hdr->evt == 0xff && hdr->plen == 0x07 &&
+		   skb->data[2] == 0x02) {
+		if (test_and_clear_bit(STATE_BOOTING, &intel->flags)) {
+			smp_mb__after_atomic();
+			wake_up_bit(&intel->flags, STATE_BOOTING);
+		}
+	}
+recv:
+	return hci_recv_frame(hdev, skb);
+}
+
+static void intel_recv_lpm_notify(struct hci_dev *hdev, int value)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct intel_data *intel = hu->priv;
+
+	bt_dev_dbg(hdev, "TX idle notification (%d)", value);
+
+	if (value) {
+		set_bit(STATE_TX_ACTIVE, &intel->flags);
+		schedule_work(&intel->busy_work);
+	} else {
+		clear_bit(STATE_TX_ACTIVE, &intel->flags);
+	}
+}
+
+static int intel_recv_lpm(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct hci_lpm_pkt *lpm = (void *)skb->data;
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct intel_data *intel = hu->priv;
+
+	switch (lpm->opcode) {
+	case LPM_OP_TX_NOTIFY:
+		if (lpm->dlen < 1) {
+			bt_dev_err(hu->hdev, "Invalid LPM notification packet");
+			break;
+		}
+		intel_recv_lpm_notify(hdev, lpm->data[0]);
+		break;
+	case LPM_OP_SUSPEND_ACK:
+		set_bit(STATE_SUSPENDED, &intel->flags);
+		if (test_and_clear_bit(STATE_LPM_TRANSACTION, &intel->flags)) {
+			smp_mb__after_atomic();
+			wake_up_bit(&intel->flags, STATE_LPM_TRANSACTION);
+		}
+		break;
+	case LPM_OP_RESUME_ACK:
+		clear_bit(STATE_SUSPENDED, &intel->flags);
+		if (test_and_clear_bit(STATE_LPM_TRANSACTION, &intel->flags)) {
+			smp_mb__after_atomic();
+			wake_up_bit(&intel->flags, STATE_LPM_TRANSACTION);
+		}
+		break;
+	default:
+		bt_dev_err(hdev, "Unknown LPM opcode (%02x)", lpm->opcode);
+		break;
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+
+#define INTEL_RECV_LPM \
+	.type = HCI_LPM_PKT, \
+	.hlen = HCI_LPM_HDR_SIZE, \
+	.loff = 1, \
+	.lsize = 1, \
+	.maxlen = HCI_LPM_MAX_SIZE
+
+static const struct h4_recv_pkt intel_recv_pkts[] = {
+	{ H4_RECV_ACL,    .recv = hci_recv_frame   },
+	{ H4_RECV_SCO,    .recv = hci_recv_frame   },
+	{ H4_RECV_EVENT,  .recv = intel_recv_event },
+	{ INTEL_RECV_LPM, .recv = intel_recv_lpm   },
+};
+
+static int intel_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct intel_data *intel = hu->priv;
+
+	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+		return -EUNATCH;
+
+	intel->rx_skb = h4_recv_buf(hu->hdev, intel->rx_skb, data, count,
+				    intel_recv_pkts,
+				    ARRAY_SIZE(intel_recv_pkts));
+	if (IS_ERR(intel->rx_skb)) {
+		int err = PTR_ERR(intel->rx_skb);
+		bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
+		intel->rx_skb = NULL;
+		return err;
+	}
+
+	return count;
+}
+
+static int intel_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+	struct intel_data *intel = hu->priv;
+	struct list_head *p;
+
+	BT_DBG("hu %p skb %p", hu, skb);
+
+	if (!hu->tty->dev)
+		goto out_enqueue;
+
+	/* Be sure our controller is resumed and potential LPM transaction
+	 * completed before enqueuing any packet.
+	 */
+	mutex_lock(&intel_device_list_lock);
+	list_for_each(p, &intel_device_list) {
+		struct intel_device *idev = list_entry(p, struct intel_device,
+						       list);
+
+		if (hu->tty->dev->parent == idev->pdev->dev.parent) {
+			pm_runtime_get_sync(&idev->pdev->dev);
+			pm_runtime_mark_last_busy(&idev->pdev->dev);
+			pm_runtime_put_autosuspend(&idev->pdev->dev);
+			break;
+		}
+	}
+	mutex_unlock(&intel_device_list_lock);
+out_enqueue:
+	skb_queue_tail(&intel->txq, skb);
+
+	return 0;
+}
+
+static struct sk_buff *intel_dequeue(struct hci_uart *hu)
+{
+	struct intel_data *intel = hu->priv;
+	struct sk_buff *skb;
+
+	skb = skb_dequeue(&intel->txq);
+	if (!skb)
+		return skb;
+
+	if (test_bit(STATE_BOOTLOADER, &intel->flags) &&
+	    (hci_skb_pkt_type(skb) == HCI_COMMAND_PKT)) {
+		struct hci_command_hdr *cmd = (void *)skb->data;
+		__u16 opcode = le16_to_cpu(cmd->opcode);
+
+		/* When the 0xfc01 command is issued to boot into
+		 * the operational firmware, it will actually not
+		 * send a command complete event. To keep the flow
+		 * control working inject that event here.
+		 */
+		if (opcode == 0xfc01)
+			inject_cmd_complete(hu->hdev, opcode);
+	}
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+
+	return skb;
+}
+
+static const struct hci_uart_proto intel_proto = {
+	.id		= HCI_UART_INTEL,
+	.name		= "Intel",
+	.manufacturer	= 2,
+	.init_speed	= 115200,
+	.oper_speed	= 3000000,
+	.open		= intel_open,
+	.close		= intel_close,
+	.flush		= intel_flush,
+	.setup		= intel_setup,
+	.set_baudrate	= intel_set_baudrate,
+	.recv		= intel_recv,
+	.enqueue	= intel_enqueue,
+	.dequeue	= intel_dequeue,
+};
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id intel_acpi_match[] = {
+	{ "INT33E1", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, intel_acpi_match);
+#endif
+
+#ifdef CONFIG_PM
+static int intel_suspend_device(struct device *dev)
+{
+	struct intel_device *idev = dev_get_drvdata(dev);
+
+	mutex_lock(&idev->hu_lock);
+	if (idev->hu)
+		intel_lpm_suspend(idev->hu);
+	mutex_unlock(&idev->hu_lock);
+
+	return 0;
+}
+
+static int intel_resume_device(struct device *dev)
+{
+	struct intel_device *idev = dev_get_drvdata(dev);
+
+	mutex_lock(&idev->hu_lock);
+	if (idev->hu)
+		intel_lpm_resume(idev->hu);
+	mutex_unlock(&idev->hu_lock);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int intel_suspend(struct device *dev)
+{
+	struct intel_device *idev = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(idev->irq);
+
+	return intel_suspend_device(dev);
+}
+
+static int intel_resume(struct device *dev)
+{
+	struct intel_device *idev = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(idev->irq);
+
+	return intel_resume_device(dev);
+}
+#endif
+
+static const struct dev_pm_ops intel_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(intel_suspend, intel_resume)
+	SET_RUNTIME_PM_OPS(intel_suspend_device, intel_resume_device, NULL)
+};
+
+static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
+static const struct acpi_gpio_params host_wake_gpios = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_hci_intel_gpios[] = {
+	{ "reset-gpios", &reset_gpios, 1 },
+	{ "host-wake-gpios", &host_wake_gpios, 1 },
+	{ },
+};
+
+static int intel_probe(struct platform_device *pdev)
+{
+	struct intel_device *idev;
+	int ret;
+
+	idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
+	if (!idev)
+		return -ENOMEM;
+
+	mutex_init(&idev->hu_lock);
+
+	idev->pdev = pdev;
+
+	ret = devm_acpi_dev_add_driver_gpios(&pdev->dev, acpi_hci_intel_gpios);
+	if (ret)
+		dev_dbg(&pdev->dev, "Unable to add GPIO mapping table\n");
+
+	idev->reset = devm_gpiod_get(&pdev->dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(idev->reset)) {
+		dev_err(&pdev->dev, "Unable to retrieve gpio\n");
+		return PTR_ERR(idev->reset);
+	}
+
+	idev->irq = platform_get_irq(pdev, 0);
+	if (idev->irq < 0) {
+		struct gpio_desc *host_wake;
+
+		dev_err(&pdev->dev, "No IRQ, falling back to gpio-irq\n");
+
+		host_wake = devm_gpiod_get(&pdev->dev, "host-wake", GPIOD_IN);
+		if (IS_ERR(host_wake)) {
+			dev_err(&pdev->dev, "Unable to retrieve IRQ\n");
+			goto no_irq;
+		}
+
+		idev->irq = gpiod_to_irq(host_wake);
+		if (idev->irq < 0) {
+			dev_err(&pdev->dev, "No corresponding irq for gpio\n");
+			goto no_irq;
+		}
+	}
+
+	/* Only enable wake-up/irq when controller is powered */
+	device_set_wakeup_capable(&pdev->dev, true);
+	device_wakeup_disable(&pdev->dev);
+
+no_irq:
+	platform_set_drvdata(pdev, idev);
+
+	/* Place this instance on the device list */
+	mutex_lock(&intel_device_list_lock);
+	list_add_tail(&idev->list, &intel_device_list);
+	mutex_unlock(&intel_device_list_lock);
+
+	dev_info(&pdev->dev, "registered, gpio(%d)/irq(%d).\n",
+		 desc_to_gpio(idev->reset), idev->irq);
+
+	return 0;
+}
+
+static int intel_remove(struct platform_device *pdev)
+{
+	struct intel_device *idev = platform_get_drvdata(pdev);
+
+	device_wakeup_disable(&pdev->dev);
+
+	mutex_lock(&intel_device_list_lock);
+	list_del(&idev->list);
+	mutex_unlock(&intel_device_list_lock);
+
+	dev_info(&pdev->dev, "unregistered.\n");
+
+	return 0;
+}
+
+static struct platform_driver intel_driver = {
+	.probe = intel_probe,
+	.remove = intel_remove,
+	.driver = {
+		.name = "hci_intel",
+		.acpi_match_table = ACPI_PTR(intel_acpi_match),
+		.pm = &intel_pm_ops,
+	},
+};
+
+int __init intel_init(void)
+{
+	platform_driver_register(&intel_driver);
+
+	return hci_uart_register_proto(&intel_proto);
+}
+
+int __exit intel_deinit(void)
+{
+	platform_driver_unregister(&intel_driver);
+
+	return hci_uart_unregister_proto(&intel_proto);
+}