Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 128 insertions, 0 deletions

diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig
new file mode 100644
index 000000000..c10844188
--- /dev/null
+++ b/drivers/char/ipmi/Kconfig
@@ -0,0 +1,128 @@
+#
+# IPMI device configuration
+#
+
+menuconfig IPMI_HANDLER
+       tristate 'IPMI top-level message handler'
+       depends on HAS_IOMEM
+       select IPMI_DMI_DECODE if DMI
+       help
+         This enables the central IPMI message handler, required for IPMI
+	 to work.
+
+         IPMI is a standard for managing sensors (temperature,
+         voltage, etc.) in a system.
+
+         See <file:Documentation/IPMI.txt> for more details on the driver.
+
+	 If unsure, say N.
+
+config IPMI_DMI_DECODE
+       bool
+
+if IPMI_HANDLER
+
+config IPMI_PANIC_EVENT
+       bool 'Generate a panic event to all BMCs on a panic'
+       help
+	 When a panic occurs, this will cause the IPMI message handler to,
+	 by default, generate an IPMI event describing the panic to each
+	 interface registered with the message handler.  This is always
+	 available, the module parameter for ipmi_msghandler named
+	 panic_op can be set to "event" to chose this value, this config
+	 simply causes the default value to be set to "event".
+
+config IPMI_PANIC_STRING
+	bool 'Generate OEM events containing the panic string'
+	depends on IPMI_PANIC_EVENT
+	help
+	  When a panic occurs, this will cause the IPMI message handler to,
+	  by default, generate IPMI OEM type f0 events holding the IPMB
+	  address of the panic generator (byte 4 of the event), a sequence
+	  number for the string (byte 5 of the event) and part of the
+	  string (the rest of the event).  Bytes 1, 2, and 3 are the normal
+	  usage for an OEM event.  You can fetch these events and use the
+	  sequence numbers to piece the string together.  This config
+	  parameter sets the default value to generate these events,
+	  the module parameter for ipmi_msghandler named panic_op can
+	  be set to "string" to chose this value, this config simply
+	  causes the default value to be set to "string".
+
+config IPMI_DEVICE_INTERFACE
+       tristate 'Device interface for IPMI'
+       help
+         This provides an IOCTL interface to the IPMI message handler so
+	 userland processes may use IPMI.  It supports poll() and select().
+
+config IPMI_SI
+       tristate 'IPMI System Interface handler'
+       help
+         Provides a driver for System Interfaces (KCS, SMIC, BT).
+	 Currently, only KCS and SMIC are supported.  If
+	 you are using IPMI, you should probably say "y" here.
+
+config IPMI_SSIF
+       tristate 'IPMI SMBus handler (SSIF)'
+       select I2C
+       help
+         Provides a driver for a SMBus interface to a BMC, meaning that you
+	 have a driver that must be accessed over an I2C bus instead of a
+	 standard interface.  This module requires I2C support.
+
+config IPMI_POWERNV
+       depends on PPC_POWERNV
+       tristate 'POWERNV (OPAL firmware) IPMI interface'
+       help
+         Provides a driver for OPAL firmware-based IPMI interfaces.
+
+config IPMI_WATCHDOG
+       tristate 'IPMI Watchdog Timer'
+       help
+         This enables the IPMI watchdog timer.
+
+config IPMI_POWEROFF
+       tristate 'IPMI Poweroff'
+       help
+         This enables a function to power off the system with IPMI if
+	 the IPMI management controller is capable of this.
+
+endif # IPMI_HANDLER
+
+config IPMI_KCS_BMC
+	tristate
+
+config ASPEED_KCS_IPMI_BMC
+	depends on ARCH_ASPEED || COMPILE_TEST
+	select IPMI_KCS_BMC
+	select REGMAP_MMIO
+	tristate "Aspeed KCS IPMI BMC driver"
+	help
+	  Provides a driver for the KCS (Keyboard Controller Style) IPMI
+	  interface found on Aspeed SOCs (AST2400 and AST2500).
+
+	  The driver implements the BMC side of the KCS contorller, it
+	  provides the access of KCS IO space for BMC side.
+
+config NPCM7XX_KCS_IPMI_BMC
+	depends on ARCH_NPCM7XX || COMPILE_TEST
+	select IPMI_KCS_BMC
+	select REGMAP_MMIO
+	tristate "NPCM7xx KCS IPMI BMC driver"
+	help
+	  Provides a driver for the KCS (Keyboard Controller Style) IPMI
+	  interface found on Nuvoton NPCM7xx SOCs.
+
+	  The driver implements the BMC side of the KCS contorller, it
+	  provides the access of KCS IO space for BMC side.
+
+	  This support is also available as a module.  If so, the module
+	  will be called kcs_bmc_npcm7xx.
+
+config ASPEED_BT_IPMI_BMC
+	depends on ARCH_ASPEED || COMPILE_TEST
+       depends on REGMAP && REGMAP_MMIO && MFD_SYSCON
+	tristate "BT IPMI bmc driver"
+	help
+	  Provides a driver for the BT (Block Transfer) IPMI interface
+	  found on Aspeed SOCs (AST2400 and AST2500). The driver
+	  implements the BMC side of the BT interface.