Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 224 insertions, 0 deletions

diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
new file mode 100644
index 000000000..6b963d1c8
--- /dev/null
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -0,0 +1,224 @@
+/*****************************************************************************
+ *
+ *     Author: Xilinx, Inc.
+ *
+ *     This program is free software; you can redistribute it and/or modify it
+ *     under the terms of the GNU General Public License as published by the
+ *     Free Software Foundation; either version 2 of the License, or (at your
+ *     option) any later version.
+ *
+ *     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
+ *     AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
+ *     SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
+ *     OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
+ *     APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
+ *     THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
+ *     AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
+ *     FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
+ *     WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
+ *     IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
+ *     REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
+ *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ *     FOR A PARTICULAR PURPOSE.
+ *
+ *     (c) Copyright 2003-2007 Xilinx Inc.
+ *     All rights reserved.
+ *
+ *     You should have received a copy of the GNU General Public License along
+ *     with this program; if not, write to the Free Software Foundation, Inc.,
+ *     675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *****************************************************************************/
+
+#ifndef XILINX_HWICAP_H_	/* prevent circular inclusions */
+#define XILINX_HWICAP_H_	/* by using protection macros */
+
+#include <linux/types.h>
+#include <linux/cdev.h>
+#include <linux/platform_device.h>
+
+#include <linux/io.h>
+
+struct hwicap_drvdata {
+	u32 write_buffer_in_use;  /* Always in [0,3] */
+	u8 write_buffer[4];
+	u32 read_buffer_in_use;	  /* Always in [0,3] */
+	u8 read_buffer[4];
+	resource_size_t mem_start;/* phys. address of the control registers */
+	resource_size_t mem_end;  /* phys. address of the control registers */
+	resource_size_t mem_size;
+	void __iomem *base_address;/* virt. address of the control registers */
+
+	struct device *dev;
+	struct cdev cdev;	/* Char device structure */
+	dev_t devt;
+
+	const struct hwicap_driver_config *config;
+	const struct config_registers *config_regs;
+	void *private_data;
+	bool is_open;
+	struct mutex sem;
+};
+
+struct hwicap_driver_config {
+	/* Read configuration data given by size into the data buffer.
+	 * Return 0 if successful.
+	 */
+	int (*get_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
+			u32 size);
+	/* Write configuration data given by size from the data buffer.
+	 * Return 0 if successful.
+	 */
+	int (*set_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
+			u32 size);
+	/* Get the status register, bit pattern given by:
+	 * D8 - 0 = configuration error
+	 * D7 - 1 = alignment found
+	 * D6 - 1 = readback in progress
+	 * D5 - 0 = abort in progress
+	 * D4 - Always 1
+	 * D3 - Always 1
+	 * D2 - Always 1
+	 * D1 - Always 1
+	 * D0 - 1 = operation completed
+	 */
+	u32 (*get_status)(struct hwicap_drvdata *drvdata);
+	/* Reset the hw */
+	void (*reset)(struct hwicap_drvdata *drvdata);
+};
+
+/* Number of times to poll the done register. This has to be large
+ * enough to allow an entire configuration to complete. If an entire
+ * page (4kb) is configured at once, that could take up to 4k cycles
+ * with a byte-wide icap interface. In most cases, this driver is
+ * used with a much smaller fifo, but this should be sufficient in the
+ * worst case.
+ */
+#define XHI_MAX_RETRIES     5000
+
+/************ Constant Definitions *************/
+
+#define XHI_PAD_FRAMES              0x1
+
+/* Mask for calculating configuration packet headers */
+#define XHI_WORD_COUNT_MASK_TYPE_1  0x7FFUL
+#define XHI_WORD_COUNT_MASK_TYPE_2  0x1FFFFFUL
+#define XHI_TYPE_MASK               0x7
+#define XHI_REGISTER_MASK           0xF
+#define XHI_OP_MASK                 0x3
+
+#define XHI_TYPE_SHIFT              29
+#define XHI_REGISTER_SHIFT          13
+#define XHI_OP_SHIFT                27
+
+#define XHI_TYPE_1                  1
+#define XHI_TYPE_2                  2
+#define XHI_OP_WRITE                2
+#define XHI_OP_READ                 1
+
+/* Address Block Types */
+#define XHI_FAR_CLB_BLOCK           0
+#define XHI_FAR_BRAM_BLOCK          1
+#define XHI_FAR_BRAM_INT_BLOCK      2
+
+struct config_registers {
+	u32 CRC;
+	u32 FAR;
+	u32 FDRI;
+	u32 FDRO;
+	u32 CMD;
+	u32 CTL;
+	u32 MASK;
+	u32 STAT;
+	u32 LOUT;
+	u32 COR;
+	u32 MFWR;
+	u32 FLR;
+	u32 KEY;
+	u32 CBC;
+	u32 IDCODE;
+	u32 AXSS;
+	u32 C0R_1;
+	u32 CSOB;
+	u32 WBSTAR;
+	u32 TIMER;
+	u32 BOOTSTS;
+	u32 CTL_1;
+};
+
+/* Configuration Commands */
+#define XHI_CMD_NULL                0
+#define XHI_CMD_WCFG                1
+#define XHI_CMD_MFW                 2
+#define XHI_CMD_DGHIGH              3
+#define XHI_CMD_RCFG                4
+#define XHI_CMD_START               5
+#define XHI_CMD_RCAP                6
+#define XHI_CMD_RCRC                7
+#define XHI_CMD_AGHIGH              8
+#define XHI_CMD_SWITCH              9
+#define XHI_CMD_GRESTORE            10
+#define XHI_CMD_SHUTDOWN            11
+#define XHI_CMD_GCAPTURE            12
+#define XHI_CMD_DESYNCH             13
+#define XHI_CMD_IPROG               15 /* Only in Virtex5 */
+#define XHI_CMD_CRCC                16 /* Only in Virtex5 */
+#define XHI_CMD_LTIMER              17 /* Only in Virtex5 */
+
+/* Packet constants */
+#define XHI_SYNC_PACKET             0xAA995566UL
+#define XHI_DUMMY_PACKET            0xFFFFFFFFUL
+#define XHI_NOOP_PACKET             (XHI_TYPE_1 << XHI_TYPE_SHIFT)
+#define XHI_TYPE_2_READ ((XHI_TYPE_2 << XHI_TYPE_SHIFT) | \
+			(XHI_OP_READ << XHI_OP_SHIFT))
+
+#define XHI_TYPE_2_WRITE ((XHI_TYPE_2 << XHI_TYPE_SHIFT) | \
+			(XHI_OP_WRITE << XHI_OP_SHIFT))
+
+#define XHI_TYPE2_CNT_MASK          0x07FFFFFF
+
+#define XHI_TYPE_1_PACKET_MAX_WORDS 2047UL
+#define XHI_TYPE_1_HEADER_BYTES     4
+#define XHI_TYPE_2_HEADER_BYTES     8
+
+/* Constant to use for CRC check when CRC has been disabled */
+#define XHI_DISABLED_AUTO_CRC       0x0000DEFCUL
+
+/* Meanings of the bits returned by get_status */
+#define XHI_SR_CFGERR_N_MASK 0x00000100 /* Config Error Mask */
+#define XHI_SR_DALIGN_MASK 0x00000080 /* Data Alignment Mask */
+#define XHI_SR_RIP_MASK 0x00000040 /* Read back Mask */
+#define XHI_SR_IN_ABORT_N_MASK 0x00000020 /* Select Map Abort Mask */
+#define XHI_SR_DONE_MASK 0x00000001 /* Done bit Mask  */
+
+/**
+ * hwicap_type_1_read - Generates a Type 1 read packet header.
+ * @reg: is the address of the register to be read back.
+ *
+ * Return:
+ * Generates a Type 1 read packet header, which is used to indirectly
+ * read registers in the configuration logic.  This packet must then
+ * be sent through the icap device, and a return packet received with
+ * the information.
+ */
+static inline u32 hwicap_type_1_read(u32 reg)
+{
+	return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
+		(reg << XHI_REGISTER_SHIFT) |
+		(XHI_OP_READ << XHI_OP_SHIFT);
+}
+
+/**
+ * hwicap_type_1_write - Generates a Type 1 write packet header
+ * @reg: is the address of the register to be read back.
+ *
+ * Return: Type 1 write packet header
+ */
+static inline u32 hwicap_type_1_write(u32 reg)
+{
+	return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
+		(reg << XHI_REGISTER_SHIFT) |
+		(XHI_OP_WRITE << XHI_OP_SHIFT);
+}
+
+#endif