Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

13 files changed, 5213 insertions, 0 deletions

diff --git a/drivers/crypto/ux500/Kconfig b/drivers/crypto/ux500/Kconfig
new file mode 100644
index 000000000..0e338bf6d
--- /dev/null
+++ b/drivers/crypto/ux500/Kconfig
@@ -0,0 +1,32 @@
+#
+# Copyright (C) ST-Ericsson SA 2010
+# Author: Shujuan Chen (shujuan.chen@stericsson.com)
+# License terms: GNU General Public License (GPL) version 2
+#
+
+config CRYPTO_DEV_UX500_CRYP
+	tristate "UX500 crypto driver for CRYP block"
+	depends on CRYPTO_DEV_UX500
+	select CRYPTO_ALGAPI
+	select CRYPTO_BLKCIPHER
+	select CRYPTO_DES
+	help
+        This selects the crypto driver for the UX500_CRYP hardware. It supports
+        AES-ECB, CBC and CTR with keys sizes of 128, 192 and 256 bit sizes.
+
+config CRYPTO_DEV_UX500_HASH
+        tristate "UX500 crypto driver for HASH block"
+        depends on CRYPTO_DEV_UX500
+        select CRYPTO_HASH
+	select CRYPTO_SHA1
+	select CRYPTO_SHA256
+        help
+          This selects the hash driver for the UX500_HASH hardware.
+          Depends on UX500/STM DMA if running in DMA mode.
+
+config CRYPTO_DEV_UX500_DEBUG
+	bool "Activate ux500 platform debug-mode for crypto and hash block"
+	depends on CRYPTO_DEV_UX500_CRYP || CRYPTO_DEV_UX500_HASH
+	help
+	  Say Y if you want to add debug prints to ux500_hash and
+	  ux500_cryp devices.
diff --git a/drivers/crypto/ux500/Makefile b/drivers/crypto/ux500/Makefile
new file mode 100644
index 000000000..b9a365bad
--- /dev/null
+++ b/drivers/crypto/ux500/Makefile
@@ -0,0 +1,8 @@
+#
+# Copyright (C) ST-Ericsson SA 2010
+# Author: Shujuan Chen (shujuan.chen@stericsson.com)
+# License terms: GNU General Public License (GPL) version 2
+#
+
+obj-$(CONFIG_CRYPTO_DEV_UX500_HASH) += hash/
+obj-$(CONFIG_CRYPTO_DEV_UX500_CRYP) += cryp/
diff --git a/drivers/crypto/ux500/cryp/Makefile b/drivers/crypto/ux500/cryp/Makefile
new file mode 100644
index 000000000..b497ae3dd
--- /dev/null
+++ b/drivers/crypto/ux500/cryp/Makefile
@@ -0,0 +1,13 @@
+#/*
+# * Copyright (C) ST-Ericsson SA 2010
+# * Author: shujuan.chen@stericsson.com for ST-Ericsson.
+# * License terms: GNU General Public License (GPL) version 2  */
+
+ifdef CONFIG_CRYPTO_DEV_UX500_DEBUG
+CFLAGS_cryp_core.o := -DDEBUG
+CFLAGS_cryp.o := -DDEBUG
+CFLAGS_cryp_irq.o := -DDEBUG
+endif
+
+obj-$(CONFIG_CRYPTO_DEV_UX500_CRYP) += ux500_cryp.o
+ux500_cryp-objs :=  cryp.o cryp_irq.o cryp_core.o
diff --git a/drivers/crypto/ux500/cryp/cryp.c b/drivers/crypto/ux500/cryp/cryp.c
new file mode 100644
index 000000000..00a16ab60
--- /dev/null
+++ b/drivers/crypto/ux500/cryp/cryp.c
@@ -0,0 +1,387 @@
+/**
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson.
+ * Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson.
+ * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson.
+ * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson.
+ * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include "cryp_p.h"
+#include "cryp.h"
+
+/**
+ * cryp_wait_until_done - wait until the device logic is not busy
+ */
+void cryp_wait_until_done(struct cryp_device_data *device_data)
+{
+	while (cryp_is_logic_busy(device_data))
+		cpu_relax();
+}
+
+/**
+ * cryp_check - This routine checks Peripheral and PCell Id
+ * @device_data: Pointer to the device data struct for base address.
+ */
+int cryp_check(struct cryp_device_data *device_data)
+{
+	int peripheralid2 = 0;
+
+	if (NULL == device_data)
+		return -EINVAL;
+
+	peripheralid2 = readl_relaxed(&device_data->base->periphId2);
+
+	if (peripheralid2 != CRYP_PERIPHERAL_ID2_DB8500)
+		return -EPERM;
+
+	/* Check Peripheral and Pcell Id Register for CRYP */
+	if ((CRYP_PERIPHERAL_ID0 ==
+		readl_relaxed(&device_data->base->periphId0))
+	    && (CRYP_PERIPHERAL_ID1 ==
+		    readl_relaxed(&device_data->base->periphId1))
+	    && (CRYP_PERIPHERAL_ID3 ==
+		    readl_relaxed(&device_data->base->periphId3))
+	    && (CRYP_PCELL_ID0 ==
+		    readl_relaxed(&device_data->base->pcellId0))
+	    && (CRYP_PCELL_ID1 ==
+		    readl_relaxed(&device_data->base->pcellId1))
+	    && (CRYP_PCELL_ID2 ==
+		    readl_relaxed(&device_data->base->pcellId2))
+	    && (CRYP_PCELL_ID3 ==
+		    readl_relaxed(&device_data->base->pcellId3))) {
+		return 0;
+	}
+
+	return -EPERM;
+}
+
+/**
+ * cryp_activity - This routine enables/disable the cryptography function.
+ * @device_data: Pointer to the device data struct for base address.
+ * @cryp_crypen: Enable/Disable functionality
+ */
+void cryp_activity(struct cryp_device_data *device_data,
+		   enum cryp_crypen cryp_crypen)
+{
+	CRYP_PUT_BITS(&device_data->base->cr,
+		      cryp_crypen,
+		      CRYP_CR_CRYPEN_POS,
+		      CRYP_CR_CRYPEN_MASK);
+}
+
+/**
+ * cryp_flush_inoutfifo - Resets both the input and the output FIFOs
+ * @device_data: Pointer to the device data struct for base address.
+ */
+void cryp_flush_inoutfifo(struct cryp_device_data *device_data)
+{
+	/*
+	 * We always need to disable the hardware before trying to flush the
+	 * FIFO. This is something that isn't written in the design
+	 * specification, but we have been informed by the hardware designers
+	 * that this must be done.
+	 */
+	cryp_activity(device_data, CRYP_CRYPEN_DISABLE);
+	cryp_wait_until_done(device_data);
+
+	CRYP_SET_BITS(&device_data->base->cr, CRYP_CR_FFLUSH_MASK);
+	/*
+	 * CRYP_SR_INFIFO_READY_MASK is the expected value on the status
+	 * register when starting a new calculation, which means Input FIFO is
+	 * not full and input FIFO is empty.
+	 */
+	while (readl_relaxed(&device_data->base->sr) !=
+	       CRYP_SR_INFIFO_READY_MASK)
+		cpu_relax();
+}
+
+/**
+ * cryp_set_configuration - This routine set the cr CRYP IP
+ * @device_data: Pointer to the device data struct for base address.
+ * @cryp_config: Pointer to the configuration parameter
+ * @control_register: The control register to be written later on.
+ */
+int cryp_set_configuration(struct cryp_device_data *device_data,
+			   struct cryp_config *cryp_config,
+			   u32 *control_register)
+{
+	u32 cr_for_kse;
+
+	if (NULL == device_data || NULL == cryp_config)
+		return -EINVAL;
+
+	*control_register |= (cryp_config->keysize << CRYP_CR_KEYSIZE_POS);
+
+	/* Prepare key for decryption in AES_ECB and AES_CBC mode. */
+	if ((CRYP_ALGORITHM_DECRYPT == cryp_config->algodir) &&
+	    ((CRYP_ALGO_AES_ECB == cryp_config->algomode) ||
+	     (CRYP_ALGO_AES_CBC == cryp_config->algomode))) {
+		cr_for_kse = *control_register;
+		/*
+		 * This seems a bit odd, but it is indeed needed to set this to
+		 * encrypt even though it is a decryption that we are doing. It
+		 * also mentioned in the design spec that you need to do this.
+		 * After the keyprepartion for decrypting is done you should set
+		 * algodir back to decryption, which is done outside this if
+		 * statement.
+		 *
+		 * According to design specification we should set mode ECB
+		 * during key preparation even though we might be running CBC
+		 * when enter this function.
+		 *
+		 * Writing to KSE_ENABLED will drop CRYPEN when key preparation
+		 * is done. Therefore we need to set CRYPEN again outside this
+		 * if statement when running decryption.
+		 */
+		cr_for_kse |= ((CRYP_ALGORITHM_ENCRYPT << CRYP_CR_ALGODIR_POS) |
+			       (CRYP_ALGO_AES_ECB << CRYP_CR_ALGOMODE_POS) |
+			       (CRYP_CRYPEN_ENABLE << CRYP_CR_CRYPEN_POS) |
+			       (KSE_ENABLED << CRYP_CR_KSE_POS));
+
+		writel_relaxed(cr_for_kse, &device_data->base->cr);
+		cryp_wait_until_done(device_data);
+	}
+
+	*control_register |=
+		((cryp_config->algomode << CRYP_CR_ALGOMODE_POS) |
+		 (cryp_config->algodir << CRYP_CR_ALGODIR_POS));
+
+	return 0;
+}
+
+/**
+ * cryp_configure_protection - set the protection bits in the CRYP logic.
+ * @device_data: Pointer to the device data struct for base address.
+ * @p_protect_config:	Pointer to the protection mode and
+ *			secure mode configuration
+ */
+int cryp_configure_protection(struct cryp_device_data *device_data,
+			      struct cryp_protection_config *p_protect_config)
+{
+	if (NULL == p_protect_config)
+		return -EINVAL;
+
+	CRYP_WRITE_BIT(&device_data->base->cr,
+		       (u32) p_protect_config->secure_access,
+		       CRYP_CR_SECURE_MASK);
+	CRYP_PUT_BITS(&device_data->base->cr,
+		      p_protect_config->privilege_access,
+		      CRYP_CR_PRLG_POS,
+		      CRYP_CR_PRLG_MASK);
+
+	return 0;
+}
+
+/**
+ * cryp_is_logic_busy - returns the busy status of the CRYP logic
+ * @device_data: Pointer to the device data struct for base address.
+ */
+int cryp_is_logic_busy(struct cryp_device_data *device_data)
+{
+	return CRYP_TEST_BITS(&device_data->base->sr,
+			      CRYP_SR_BUSY_MASK);
+}
+
+/**
+ * cryp_configure_for_dma - configures the CRYP IP for DMA operation
+ * @device_data: Pointer to the device data struct for base address.
+ * @dma_req: Specifies the DMA request type value.
+ */
+void cryp_configure_for_dma(struct cryp_device_data *device_data,
+			    enum cryp_dma_req_type dma_req)
+{
+	CRYP_SET_BITS(&device_data->base->dmacr,
+		      (u32) dma_req);
+}
+
+/**
+ * cryp_configure_key_values - configures the key values for CRYP operations
+ * @device_data: Pointer to the device data struct for base address.
+ * @key_reg_index: Key value index register
+ * @key_value: The key value struct
+ */
+int cryp_configure_key_values(struct cryp_device_data *device_data,
+			      enum cryp_key_reg_index key_reg_index,
+			      struct cryp_key_value key_value)
+{
+	while (cryp_is_logic_busy(device_data))
+		cpu_relax();
+
+	switch (key_reg_index) {
+	case CRYP_KEY_REG_1:
+		writel_relaxed(key_value.key_value_left,
+				&device_data->base->key_1_l);
+		writel_relaxed(key_value.key_value_right,
+				&device_data->base->key_1_r);
+		break;
+	case CRYP_KEY_REG_2:
+		writel_relaxed(key_value.key_value_left,
+				&device_data->base->key_2_l);
+		writel_relaxed(key_value.key_value_right,
+				&device_data->base->key_2_r);
+		break;
+	case CRYP_KEY_REG_3:
+		writel_relaxed(key_value.key_value_left,
+				&device_data->base->key_3_l);
+		writel_relaxed(key_value.key_value_right,
+				&device_data->base->key_3_r);
+		break;
+	case CRYP_KEY_REG_4:
+		writel_relaxed(key_value.key_value_left,
+				&device_data->base->key_4_l);
+		writel_relaxed(key_value.key_value_right,
+				&device_data->base->key_4_r);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * cryp_configure_init_vector - configures the initialization vector register
+ * @device_data: Pointer to the device data struct for base address.
+ * @init_vector_index: Specifies the index of the init vector.
+ * @init_vector_value: Specifies the value for the init vector.
+ */
+int cryp_configure_init_vector(struct cryp_device_data *device_data,
+			       enum cryp_init_vector_index
+			       init_vector_index,
+			       struct cryp_init_vector_value
+			       init_vector_value)
+{
+	while (cryp_is_logic_busy(device_data))
+		cpu_relax();
+
+	switch (init_vector_index) {
+	case CRYP_INIT_VECTOR_INDEX_0:
+		writel_relaxed(init_vector_value.init_value_left,
+		       &device_data->base->init_vect_0_l);
+		writel_relaxed(init_vector_value.init_value_right,
+		       &device_data->base->init_vect_0_r);
+		break;
+	case CRYP_INIT_VECTOR_INDEX_1:
+		writel_relaxed(init_vector_value.init_value_left,
+		       &device_data->base->init_vect_1_l);
+		writel_relaxed(init_vector_value.init_value_right,
+		       &device_data->base->init_vect_1_r);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * cryp_save_device_context -	Store hardware registers and
+ *				other device context parameter
+ * @device_data: Pointer to the device data struct for base address.
+ * @ctx: Crypto device context
+ */
+void cryp_save_device_context(struct cryp_device_data *device_data,
+			      struct cryp_device_context *ctx,
+			      int cryp_mode)
+{
+	enum cryp_algo_mode algomode;
+	struct cryp_register __iomem *src_reg = device_data->base;
+	struct cryp_config *config =
+		(struct cryp_config *)device_data->current_ctx;
+
+	/*
+	 * Always start by disable the hardware and wait for it to finish the
+	 * ongoing calculations before trying to reprogram it.
+	 */
+	cryp_activity(device_data, CRYP_CRYPEN_DISABLE);
+	cryp_wait_until_done(device_data);
+
+	if (cryp_mode == CRYP_MODE_DMA)
+		cryp_configure_for_dma(device_data, CRYP_DMA_DISABLE_BOTH);
+
+	if (CRYP_TEST_BITS(&src_reg->sr, CRYP_SR_IFEM_MASK) == 0)
+		ctx->din = readl_relaxed(&src_reg->din);
+
+	ctx->cr = readl_relaxed(&src_reg->cr) & CRYP_CR_CONTEXT_SAVE_MASK;
+
+	switch (config->keysize) {
+	case CRYP_KEY_SIZE_256:
+		ctx->key_4_l = readl_relaxed(&src_reg->key_4_l);
+		ctx->key_4_r = readl_relaxed(&src_reg->key_4_r);
+
+	case CRYP_KEY_SIZE_192:
+		ctx->key_3_l = readl_relaxed(&src_reg->key_3_l);
+		ctx->key_3_r = readl_relaxed(&src_reg->key_3_r);
+
+	case CRYP_KEY_SIZE_128:
+		ctx->key_2_l = readl_relaxed(&src_reg->key_2_l);
+		ctx->key_2_r = readl_relaxed(&src_reg->key_2_r);
+
+	default:
+		ctx->key_1_l = readl_relaxed(&src_reg->key_1_l);
+		ctx->key_1_r = readl_relaxed(&src_reg->key_1_r);
+	}
+
+	/* Save IV for CBC mode for both AES and DES. */
+	algomode = ((ctx->cr & CRYP_CR_ALGOMODE_MASK) >> CRYP_CR_ALGOMODE_POS);
+	if (algomode == CRYP_ALGO_TDES_CBC ||
+	    algomode == CRYP_ALGO_DES_CBC ||
+	    algomode == CRYP_ALGO_AES_CBC) {
+		ctx->init_vect_0_l = readl_relaxed(&src_reg->init_vect_0_l);
+		ctx->init_vect_0_r = readl_relaxed(&src_reg->init_vect_0_r);
+		ctx->init_vect_1_l = readl_relaxed(&src_reg->init_vect_1_l);
+		ctx->init_vect_1_r = readl_relaxed(&src_reg->init_vect_1_r);
+	}
+}
+
+/**
+ * cryp_restore_device_context -	Restore hardware registers and
+ *					other device context parameter
+ * @device_data: Pointer to the device data struct for base address.
+ * @ctx: Crypto device context
+ */
+void cryp_restore_device_context(struct cryp_device_data *device_data,
+				 struct cryp_device_context *ctx)
+{
+	struct cryp_register __iomem *reg = device_data->base;
+	struct cryp_config *config =
+		(struct cryp_config *)device_data->current_ctx;
+
+	/*
+	 * Fall through for all items in switch statement. DES is captured in
+	 * the default.
+	 */
+	switch (config->keysize) {
+	case CRYP_KEY_SIZE_256:
+		writel_relaxed(ctx->key_4_l, &reg->key_4_l);
+		writel_relaxed(ctx->key_4_r, &reg->key_4_r);
+
+	case CRYP_KEY_SIZE_192:
+		writel_relaxed(ctx->key_3_l, &reg->key_3_l);
+		writel_relaxed(ctx->key_3_r, &reg->key_3_r);
+
+	case CRYP_KEY_SIZE_128:
+		writel_relaxed(ctx->key_2_l, &reg->key_2_l);
+		writel_relaxed(ctx->key_2_r, &reg->key_2_r);
+
+	default:
+		writel_relaxed(ctx->key_1_l, &reg->key_1_l);
+		writel_relaxed(ctx->key_1_r, &reg->key_1_r);
+	}
+
+	/* Restore IV for CBC mode for AES and DES. */
+	if (config->algomode == CRYP_ALGO_TDES_CBC ||
+	    config->algomode == CRYP_ALGO_DES_CBC ||
+	    config->algomode == CRYP_ALGO_AES_CBC) {
+		writel_relaxed(ctx->init_vect_0_l, &reg->init_vect_0_l);
+		writel_relaxed(ctx->init_vect_0_r, &reg->init_vect_0_r);
+		writel_relaxed(ctx->init_vect_1_l, &reg->init_vect_1_l);
+		writel_relaxed(ctx->init_vect_1_r, &reg->init_vect_1_r);
+	}
+}
diff --git a/drivers/crypto/ux500/cryp/cryp.h b/drivers/crypto/ux500/cryp/cryp.h
new file mode 100644
index 000000000..d1d6606fe
--- /dev/null
+++ b/drivers/crypto/ux500/cryp/cryp.h
@@ -0,0 +1,313 @@
+/**
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson.
+ * Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson.
+ * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson.
+ * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson.
+ * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef _CRYP_H_
+#define _CRYP_H_
+
+#include <linux/completion.h>
+#include <linux/dmaengine.h>
+#include <linux/klist.h>
+#include <linux/mutex.h>
+
+#define DEV_DBG_NAME "crypX crypX:"
+
+/* CRYP enable/disable */
+enum cryp_crypen {
+	CRYP_CRYPEN_DISABLE = 0,
+	CRYP_CRYPEN_ENABLE = 1
+};
+
+/* CRYP Start Computation enable/disable */
+enum cryp_start {
+	CRYP_START_DISABLE = 0,
+	CRYP_START_ENABLE = 1
+};
+
+/* CRYP Init Signal enable/disable */
+enum cryp_init {
+	CRYP_INIT_DISABLE = 0,
+	CRYP_INIT_ENABLE = 1
+};
+
+/* Cryp State enable/disable */
+enum cryp_state {
+	CRYP_STATE_DISABLE = 0,
+	CRYP_STATE_ENABLE = 1
+};
+
+/* Key preparation bit enable */
+enum cryp_key_prep {
+	KSE_DISABLED = 0,
+	KSE_ENABLED = 1
+};
+
+/* Key size for AES */
+#define	CRYP_KEY_SIZE_128 (0)
+#define	CRYP_KEY_SIZE_192 (1)
+#define	CRYP_KEY_SIZE_256 (2)
+
+/* AES modes */
+enum cryp_algo_mode {
+	CRYP_ALGO_TDES_ECB,
+	CRYP_ALGO_TDES_CBC,
+	CRYP_ALGO_DES_ECB,
+	CRYP_ALGO_DES_CBC,
+	CRYP_ALGO_AES_ECB,
+	CRYP_ALGO_AES_CBC,
+	CRYP_ALGO_AES_CTR,
+	CRYP_ALGO_AES_XTS
+};
+
+/* Cryp Encryption or Decryption */
+enum cryp_algorithm_dir {
+	CRYP_ALGORITHM_ENCRYPT,
+	CRYP_ALGORITHM_DECRYPT
+};
+
+/* Hardware access method */
+enum cryp_mode {
+	CRYP_MODE_POLLING,
+	CRYP_MODE_INTERRUPT,
+	CRYP_MODE_DMA
+};
+
+/**
+ * struct cryp_config -
+ * @keysize: Key size for AES
+ * @algomode: AES modes
+ * @algodir: Cryp Encryption or Decryption
+ *
+ * CRYP configuration structure to be passed to set configuration
+ */
+struct cryp_config {
+	int keysize;
+	enum cryp_algo_mode algomode;
+	enum cryp_algorithm_dir algodir;
+};
+
+/**
+ * struct cryp_protection_config -
+ * @privilege_access: Privileged cryp state enable/disable
+ * @secure_access: Secure cryp state enable/disable
+ *
+ * Protection configuration structure for setting privilage access
+ */
+struct cryp_protection_config {
+	enum cryp_state privilege_access;
+	enum cryp_state secure_access;
+};
+
+/* Cryp status */
+enum cryp_status_id {
+	CRYP_STATUS_BUSY = 0x10,
+	CRYP_STATUS_OUTPUT_FIFO_FULL = 0x08,
+	CRYP_STATUS_OUTPUT_FIFO_NOT_EMPTY = 0x04,
+	CRYP_STATUS_INPUT_FIFO_NOT_FULL = 0x02,
+	CRYP_STATUS_INPUT_FIFO_EMPTY = 0x01
+};
+
+/* Cryp DMA interface */
+#define CRYP_DMA_TX_FIFO	0x08
+#define CRYP_DMA_RX_FIFO	0x10
+
+enum cryp_dma_req_type {
+	CRYP_DMA_DISABLE_BOTH,
+	CRYP_DMA_ENABLE_IN_DATA,
+	CRYP_DMA_ENABLE_OUT_DATA,
+	CRYP_DMA_ENABLE_BOTH_DIRECTIONS
+};
+
+enum cryp_dma_channel {
+	CRYP_DMA_RX = 0,
+	CRYP_DMA_TX
+};
+
+/* Key registers */
+enum cryp_key_reg_index {
+	CRYP_KEY_REG_1,
+	CRYP_KEY_REG_2,
+	CRYP_KEY_REG_3,
+	CRYP_KEY_REG_4
+};
+
+/* Key register left and right */
+struct cryp_key_value {
+	u32 key_value_left;
+	u32 key_value_right;
+};
+
+/* Cryp Initialization structure */
+enum cryp_init_vector_index {
+	CRYP_INIT_VECTOR_INDEX_0,
+	CRYP_INIT_VECTOR_INDEX_1
+};
+
+/* struct cryp_init_vector_value -
+ * @init_value_left
+ * @init_value_right
+ * */
+struct cryp_init_vector_value {
+	u32 init_value_left;
+	u32 init_value_right;
+};
+
+/**
+ * struct cryp_device_context - structure for a cryp context.
+ * @cr: control register
+ * @dmacr: DMA control register
+ * @imsc: Interrupt mask set/clear register
+ * @key_1_l: Key 1l register
+ * @key_1_r: Key 1r register
+ * @key_2_l: Key 2l register
+ * @key_2_r: Key 2r register
+ * @key_3_l: Key 3l register
+ * @key_3_r: Key 3r register
+ * @key_4_l: Key 4l register
+ * @key_4_r: Key 4r register
+ * @init_vect_0_l: Initialization vector 0l register
+ * @init_vect_0_r: Initialization vector 0r register
+ * @init_vect_1_l: Initialization vector 1l register
+ * @init_vect_1_r: Initialization vector 0r register
+ * @din: Data in register
+ * @dout: Data out register
+ *
+ * CRYP power management specifc structure.
+ */
+struct cryp_device_context {
+	u32 cr;
+	u32 dmacr;
+	u32 imsc;
+
+	u32 key_1_l;
+	u32 key_1_r;
+	u32 key_2_l;
+	u32 key_2_r;
+	u32 key_3_l;
+	u32 key_3_r;
+	u32 key_4_l;
+	u32 key_4_r;
+
+	u32 init_vect_0_l;
+	u32 init_vect_0_r;
+	u32 init_vect_1_l;
+	u32 init_vect_1_r;
+
+	u32 din;
+	u32 dout;
+};
+
+struct cryp_dma {
+	dma_cap_mask_t mask;
+	struct completion cryp_dma_complete;
+	struct dma_chan *chan_cryp2mem;
+	struct dma_chan *chan_mem2cryp;
+	struct stedma40_chan_cfg *cfg_cryp2mem;
+	struct stedma40_chan_cfg *cfg_mem2cryp;
+	int sg_src_len;
+	int sg_dst_len;
+	struct scatterlist *sg_src;
+	struct scatterlist *sg_dst;
+	int nents_src;
+	int nents_dst;
+};
+
+/**
+ * struct cryp_device_data - structure for a cryp device.
+ * @base: Pointer to virtual base address of the cryp device.
+ * @phybase: Pointer to physical memory location of the cryp device.
+ * @dev: Pointer to the devices dev structure.
+ * @clk: Pointer to the device's clock control.
+ * @pwr_regulator: Pointer to the device's power control.
+ * @power_status: Current status of the power.
+ * @ctx_lock: Lock for current_ctx.
+ * @current_ctx: Pointer to the currently allocated context.
+ * @list_node: For inclusion into a klist.
+ * @dma: The dma structure holding channel configuration.
+ * @power_state: TRUE = power state on, FALSE = power state off.
+ * @power_state_spinlock: Spinlock for power_state.
+ * @restore_dev_ctx: TRUE = saved ctx, FALSE = no saved ctx.
+ */
+struct cryp_device_data {
+	struct cryp_register __iomem *base;
+	phys_addr_t phybase;
+	struct device *dev;
+	struct clk *clk;
+	struct regulator *pwr_regulator;
+	int power_status;
+	struct spinlock ctx_lock;
+	struct cryp_ctx *current_ctx;
+	struct klist_node list_node;
+	struct cryp_dma dma;
+	bool power_state;
+	struct spinlock power_state_spinlock;
+	bool restore_dev_ctx;
+};
+
+void cryp_wait_until_done(struct cryp_device_data *device_data);
+
+/* Initialization functions */
+
+int cryp_check(struct cryp_device_data *device_data);
+
+void cryp_activity(struct cryp_device_data *device_data,
+		   enum cryp_crypen cryp_crypen);
+
+void cryp_flush_inoutfifo(struct cryp_device_data *device_data);
+
+int cryp_set_configuration(struct cryp_device_data *device_data,
+			   struct cryp_config *cryp_config,
+			   u32 *control_register);
+
+void cryp_configure_for_dma(struct cryp_device_data *device_data,
+			    enum cryp_dma_req_type dma_req);
+
+int cryp_configure_key_values(struct cryp_device_data *device_data,
+			      enum cryp_key_reg_index key_reg_index,
+			      struct cryp_key_value key_value);
+
+int cryp_configure_init_vector(struct cryp_device_data *device_data,
+			       enum cryp_init_vector_index
+			       init_vector_index,
+			       struct cryp_init_vector_value
+			       init_vector_value);
+
+int cryp_configure_protection(struct cryp_device_data *device_data,
+			      struct cryp_protection_config *p_protect_config);
+
+/* Power management funtions */
+void cryp_save_device_context(struct cryp_device_data *device_data,
+			      struct cryp_device_context *ctx,
+			      int cryp_mode);
+
+void cryp_restore_device_context(struct cryp_device_data *device_data,
+				 struct cryp_device_context *ctx);
+
+/* Data transfer and status bits. */
+int cryp_is_logic_busy(struct cryp_device_data *device_data);
+
+int cryp_get_status(struct cryp_device_data *device_data);
+
+/**
+ * cryp_write_indata - This routine writes 32 bit data into the data input
+ *		       register of the cryptography IP.
+ * @device_data: Pointer to the device data struct for base address.
+ * @write_data: Data to write.
+ */
+int cryp_write_indata(struct cryp_device_data *device_data, u32 write_data);
+
+/**
+ * cryp_read_outdata - This routine reads the data from the data output
+ *		       register of the CRYP logic
+ * @device_data: Pointer to the device data struct for base address.
+ * @read_data: Read the data from the output FIFO.
+ */
+int cryp_read_outdata(struct cryp_device_data *device_data, u32 *read_data);
+
+#endif /* _CRYP_H_ */
diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c
new file mode 100644
index 000000000..a92a66b1f
--- /dev/null
+++ b/drivers/crypto/ux500/cryp/cryp_core.c
@@ -0,0 +1,1762 @@
+/**
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson.
+ * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson.
+ * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson.
+ * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson.
+ * Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson.
+ * Author: Andreas Westin <andreas.westin@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/crypto.h>
+#include <linux/dmaengine.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irqreturn.h>
+#include <linux/klist.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/semaphore.h>
+#include <linux/platform_data/dma-ste-dma40.h>
+
+#include <crypto/aes.h>
+#include <crypto/algapi.h>
+#include <crypto/ctr.h>
+#include <crypto/des.h>
+#include <crypto/scatterwalk.h>
+
+#include <linux/platform_data/crypto-ux500.h>
+
+#include "cryp_p.h"
+#include "cryp.h"
+
+#define CRYP_MAX_KEY_SIZE	32
+#define BYTES_PER_WORD		4
+
+static int cryp_mode;
+static atomic_t session_id;
+
+static struct stedma40_chan_cfg *mem_to_engine;
+static struct stedma40_chan_cfg *engine_to_mem;
+
+/**
+ * struct cryp_driver_data - data specific to the driver.
+ *
+ * @device_list: A list of registered devices to choose from.
+ * @device_allocation: A semaphore initialized with number of devices.
+ */
+struct cryp_driver_data {
+	struct klist device_list;
+	struct semaphore device_allocation;
+};
+
+/**
+ * struct cryp_ctx - Crypto context
+ * @config: Crypto mode.
+ * @key[CRYP_MAX_KEY_SIZE]: Key.
+ * @keylen: Length of key.
+ * @iv: Pointer to initialization vector.
+ * @indata: Pointer to indata.
+ * @outdata: Pointer to outdata.
+ * @datalen: Length of indata.
+ * @outlen: Length of outdata.
+ * @blocksize: Size of blocks.
+ * @updated: Updated flag.
+ * @dev_ctx: Device dependent context.
+ * @device: Pointer to the device.
+ */
+struct cryp_ctx {
+	struct cryp_config config;
+	u8 key[CRYP_MAX_KEY_SIZE];
+	u32 keylen;
+	u8 *iv;
+	const u8 *indata;
+	u8 *outdata;
+	u32 datalen;
+	u32 outlen;
+	u32 blocksize;
+	u8 updated;
+	struct cryp_device_context dev_ctx;
+	struct cryp_device_data *device;
+	u32 session_id;
+};
+
+static struct cryp_driver_data driver_data;
+
+/**
+ * uint8p_to_uint32_be - 4*uint8 to uint32 big endian
+ * @in: Data to convert.
+ */
+static inline u32 uint8p_to_uint32_be(u8 *in)
+{
+	u32 *data = (u32 *)in;
+
+	return cpu_to_be32p(data);
+}
+
+/**
+ * swap_bits_in_byte - mirror the bits in a byte
+ * @b: the byte to be mirrored
+ *
+ * The bits are swapped the following way:
+ *  Byte b include bits 0-7, nibble 1 (n1) include bits 0-3 and
+ *  nibble 2 (n2) bits 4-7.
+ *
+ *  Nibble 1 (n1):
+ *  (The "old" (moved) bit is replaced with a zero)
+ *  1. Move bit 6 and 7, 4 positions to the left.
+ *  2. Move bit 3 and 5, 2 positions to the left.
+ *  3. Move bit 1-4, 1 position to the left.
+ *
+ *  Nibble 2 (n2):
+ *  1. Move bit 0 and 1, 4 positions to the right.
+ *  2. Move bit 2 and 4, 2 positions to the right.
+ *  3. Move bit 3-6, 1 position to the right.
+ *
+ *  Combine the two nibbles to a complete and swapped byte.
+ */
+
+static inline u8 swap_bits_in_byte(u8 b)
+{
+#define R_SHIFT_4_MASK  0xc0 /* Bits 6 and 7, right shift 4 */
+#define R_SHIFT_2_MASK  0x28 /* (After right shift 4) Bits 3 and 5,
+				  right shift 2 */
+#define R_SHIFT_1_MASK  0x1e /* (After right shift 2) Bits 1-4,
+				  right shift 1 */
+#define L_SHIFT_4_MASK  0x03 /* Bits 0 and 1, left shift 4 */
+#define L_SHIFT_2_MASK  0x14 /* (After left shift 4) Bits 2 and 4,
+				  left shift 2 */
+#define L_SHIFT_1_MASK  0x78 /* (After left shift 1) Bits 3-6,
+				  left shift 1 */
+
+	u8 n1;
+	u8 n2;
+
+	/* Swap most significant nibble */
+	/* Right shift 4, bits 6 and 7 */
+	n1 = ((b  & R_SHIFT_4_MASK) >> 4) | (b  & ~(R_SHIFT_4_MASK >> 4));
+	/* Right shift 2, bits 3 and 5 */
+	n1 = ((n1 & R_SHIFT_2_MASK) >> 2) | (n1 & ~(R_SHIFT_2_MASK >> 2));
+	/* Right shift 1, bits 1-4 */
+	n1 = (n1  & R_SHIFT_1_MASK) >> 1;
+
+	/* Swap least significant nibble */
+	/* Left shift 4, bits 0 and 1 */
+	n2 = ((b  & L_SHIFT_4_MASK) << 4) | (b  & ~(L_SHIFT_4_MASK << 4));
+	/* Left shift 2, bits 2 and 4 */
+	n2 = ((n2 & L_SHIFT_2_MASK) << 2) | (n2 & ~(L_SHIFT_2_MASK << 2));
+	/* Left shift 1, bits 3-6 */
+	n2 = (n2  & L_SHIFT_1_MASK) << 1;
+
+	return n1 | n2;
+}
+
+static inline void swap_words_in_key_and_bits_in_byte(const u8 *in,
+						      u8 *out, u32 len)
+{
+	unsigned int i = 0;
+	int j;
+	int index = 0;
+
+	j = len - BYTES_PER_WORD;
+	while (j >= 0) {
+		for (i = 0; i < BYTES_PER_WORD; i++) {
+			index = len - j - BYTES_PER_WORD + i;
+			out[j + i] =
+				swap_bits_in_byte(in[index]);
+		}
+		j -= BYTES_PER_WORD;
+	}
+}
+
+static void add_session_id(struct cryp_ctx *ctx)
+{
+	/*
+	 * We never want 0 to be a valid value, since this is the default value
+	 * for the software context.
+	 */
+	if (unlikely(atomic_inc_and_test(&session_id)))
+		atomic_inc(&session_id);
+
+	ctx->session_id = atomic_read(&session_id);
+}
+
+static irqreturn_t cryp_interrupt_handler(int irq, void *param)
+{
+	struct cryp_ctx *ctx;
+	int count;
+	struct cryp_device_data *device_data;
+
+	if (param == NULL) {
+		BUG_ON(!param);
+		return IRQ_HANDLED;
+	}
+
+	/* The device is coming from the one found in hw_crypt_noxts. */
+	device_data = (struct cryp_device_data *)param;
+
+	ctx = device_data->current_ctx;
+
+	if (ctx == NULL) {
+		BUG_ON(!ctx);
+		return IRQ_HANDLED;
+	}
+
+	dev_dbg(ctx->device->dev, "[%s] (len: %d) %s, ", __func__, ctx->outlen,
+		cryp_pending_irq_src(device_data, CRYP_IRQ_SRC_OUTPUT_FIFO) ?
+		"out" : "in");
+
+	if (cryp_pending_irq_src(device_data,
+				 CRYP_IRQ_SRC_OUTPUT_FIFO)) {
+		if (ctx->outlen / ctx->blocksize > 0) {
+			count = ctx->blocksize / 4;
+
+			readsl(&device_data->base->dout, ctx->outdata, count);
+			ctx->outdata += count;
+			ctx->outlen -= count;
+
+			if (ctx->outlen == 0) {
+				cryp_disable_irq_src(device_data,
+						     CRYP_IRQ_SRC_OUTPUT_FIFO);
+			}
+		}
+	} else if (cryp_pending_irq_src(device_data,
+					CRYP_IRQ_SRC_INPUT_FIFO)) {
+		if (ctx->datalen / ctx->blocksize > 0) {
+			count = ctx->blocksize / 4;
+
+			writesl(&device_data->base->din, ctx->indata, count);
+
+			ctx->indata += count;
+			ctx->datalen -= count;
+
+			if (ctx->datalen == 0)
+				cryp_disable_irq_src(device_data,
+						   CRYP_IRQ_SRC_INPUT_FIFO);
+
+			if (ctx->config.algomode == CRYP_ALGO_AES_XTS) {
+				CRYP_PUT_BITS(&device_data->base->cr,
+					      CRYP_START_ENABLE,
+					      CRYP_CR_START_POS,
+					      CRYP_CR_START_MASK);
+
+				cryp_wait_until_done(device_data);
+			}
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int mode_is_aes(enum cryp_algo_mode mode)
+{
+	return	CRYP_ALGO_AES_ECB == mode ||
+		CRYP_ALGO_AES_CBC == mode ||
+		CRYP_ALGO_AES_CTR == mode ||
+		CRYP_ALGO_AES_XTS == mode;
+}
+
+static int cfg_iv(struct cryp_device_data *device_data, u32 left, u32 right,
+		  enum cryp_init_vector_index index)
+{
+	struct cryp_init_vector_value vector_value;
+
+	dev_dbg(device_data->dev, "[%s]", __func__);
+
+	vector_value.init_value_left = left;
+	vector_value.init_value_right = right;
+
+	return cryp_configure_init_vector(device_data,
+					  index,
+					  vector_value);
+}
+
+static int cfg_ivs(struct cryp_device_data *device_data, struct cryp_ctx *ctx)
+{
+	int i;
+	int status = 0;
+	int num_of_regs = ctx->blocksize / 8;
+	u32 iv[AES_BLOCK_SIZE / 4];
+
+	dev_dbg(device_data->dev, "[%s]", __func__);
+
+	/*
+	 * Since we loop on num_of_regs we need to have a check in case
+	 * someone provides an incorrect blocksize which would force calling
+	 * cfg_iv with i greater than 2 which is an error.
+	 */
+	if (num_of_regs > 2) {
+		dev_err(device_data->dev, "[%s] Incorrect blocksize %d",
+			__func__, ctx->blocksize);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ctx->blocksize / 4; i++)
+		iv[i] = uint8p_to_uint32_be(ctx->iv + i*4);
+
+	for (i = 0; i < num_of_regs; i++) {
+		status = cfg_iv(device_data, iv[i*2], iv[i*2+1],
+				(enum cryp_init_vector_index) i);
+		if (status != 0)
+			return status;
+	}
+	return status;
+}
+
+static int set_key(struct cryp_device_data *device_data,
+		   u32 left_key,
+		   u32 right_key,
+		   enum cryp_key_reg_index index)
+{
+	struct cryp_key_value key_value;
+	int cryp_error;
+
+	dev_dbg(device_data->dev, "[%s]", __func__);
+
+	key_value.key_value_left = left_key;
+	key_value.key_value_right = right_key;
+
+	cryp_error = cryp_configure_key_values(device_data,
+					       index,
+					       key_value);
+	if (cryp_error != 0)
+		dev_err(device_data->dev, "[%s]: "
+			"cryp_configure_key_values() failed!", __func__);
+
+	return cryp_error;
+}
+
+static int cfg_keys(struct cryp_ctx *ctx)
+{
+	int i;
+	int num_of_regs = ctx->keylen / 8;
+	u32 swapped_key[CRYP_MAX_KEY_SIZE / 4];
+	int cryp_error = 0;
+
+	dev_dbg(ctx->device->dev, "[%s]", __func__);
+
+	if (mode_is_aes(ctx->config.algomode)) {
+		swap_words_in_key_and_bits_in_byte((u8 *)ctx->key,
+						   (u8 *)swapped_key,
+						   ctx->keylen);
+	} else {
+		for (i = 0; i < ctx->keylen / 4; i++)
+			swapped_key[i] = uint8p_to_uint32_be(ctx->key + i*4);
+	}
+
+	for (i = 0; i < num_of_regs; i++) {
+		cryp_error = set_key(ctx->device,
+				     *(((u32 *)swapped_key)+i*2),
+				     *(((u32 *)swapped_key)+i*2+1),
+				     (enum cryp_key_reg_index) i);
+
+		if (cryp_error != 0) {
+			dev_err(ctx->device->dev, "[%s]: set_key() failed!",
+					__func__);
+			return cryp_error;
+		}
+	}
+	return cryp_error;
+}
+
+static int cryp_setup_context(struct cryp_ctx *ctx,
+			      struct cryp_device_data *device_data)
+{
+	u32 control_register = CRYP_CR_DEFAULT;
+
+	switch (cryp_mode) {
+	case CRYP_MODE_INTERRUPT:
+		writel_relaxed(CRYP_IMSC_DEFAULT, &device_data->base->imsc);
+		break;
+
+	case CRYP_MODE_DMA:
+		writel_relaxed(CRYP_DMACR_DEFAULT, &device_data->base->dmacr);
+		break;
+
+	default:
+		break;
+	}
+
+	if (ctx->updated == 0) {
+		cryp_flush_inoutfifo(device_data);
+		if (cfg_keys(ctx) != 0) {
+			dev_err(ctx->device->dev, "[%s]: cfg_keys failed!",
+				__func__);
+			return -EINVAL;
+		}
+
+		if (ctx->iv &&
+		    CRYP_ALGO_AES_ECB != ctx->config.algomode &&
+		    CRYP_ALGO_DES_ECB != ctx->config.algomode &&
+		    CRYP_ALGO_TDES_ECB != ctx->config.algomode) {
+			if (cfg_ivs(device_data, ctx) != 0)
+				return -EPERM;
+		}
+
+		cryp_set_configuration(device_data, &ctx->config,
+				       &control_register);
+		add_session_id(ctx);
+	} else if (ctx->updated == 1 &&
+		   ctx->session_id != atomic_read(&session_id)) {
+		cryp_flush_inoutfifo(device_data);
+		cryp_restore_device_context(device_data, &ctx->dev_ctx);
+
+		add_session_id(ctx);
+		control_register = ctx->dev_ctx.cr;
+	} else
+		control_register = ctx->dev_ctx.cr;
+
+	writel(control_register |
+	       (CRYP_CRYPEN_ENABLE << CRYP_CR_CRYPEN_POS),
+	       &device_data->base->cr);
+
+	return 0;
+}
+
+static int cryp_get_device_data(struct cryp_ctx *ctx,
+				struct cryp_device_data **device_data)
+{
+	int ret;
+	struct klist_iter device_iterator;
+	struct klist_node *device_node;
+	struct cryp_device_data *local_device_data = NULL;
+	pr_debug(DEV_DBG_NAME " [%s]", __func__);
+
+	/* Wait until a device is available */
+	ret = down_interruptible(&driver_data.device_allocation);
+	if (ret)
+		return ret;  /* Interrupted */
+
+	/* Select a device */
+	klist_iter_init(&driver_data.device_list, &device_iterator);
+
+	device_node = klist_next(&device_iterator);
+	while (device_node) {
+		local_device_data = container_of(device_node,
+					   struct cryp_device_data, list_node);
+		spin_lock(&local_device_data->ctx_lock);
+		/* current_ctx allocates a device, NULL = unallocated */
+		if (local_device_data->current_ctx) {
+			device_node = klist_next(&device_iterator);
+		} else {
+			local_device_data->current_ctx = ctx;
+			ctx->device = local_device_data;
+			spin_unlock(&local_device_data->ctx_lock);
+			break;
+		}
+		spin_unlock(&local_device_data->ctx_lock);
+	}
+	klist_iter_exit(&device_iterator);
+
+	if (!device_node) {
+		/**
+		 * No free device found.
+		 * Since we allocated a device with down_interruptible, this
+		 * should not be able to happen.
+		 * Number of available devices, which are contained in
+		 * device_allocation, is therefore decremented by not doing
+		 * an up(device_allocation).
+		 */
+		return -EBUSY;
+	}
+
+	*device_data = local_device_data;
+
+	return 0;
+}
+
+static void cryp_dma_setup_channel(struct cryp_device_data *device_data,
+				   struct device *dev)
+{
+	struct dma_slave_config mem2cryp = {
+		.direction = DMA_MEM_TO_DEV,
+		.dst_addr = device_data->phybase + CRYP_DMA_TX_FIFO,
+		.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
+		.dst_maxburst = 4,
+	};
+	struct dma_slave_config cryp2mem = {
+		.direction = DMA_DEV_TO_MEM,
+		.src_addr = device_data->phybase + CRYP_DMA_RX_FIFO,
+		.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
+		.src_maxburst = 4,
+	};
+
+	dma_cap_zero(device_data->dma.mask);
+	dma_cap_set(DMA_SLAVE, device_data->dma.mask);
+
+	device_data->dma.cfg_mem2cryp = mem_to_engine;
+	device_data->dma.chan_mem2cryp =
+		dma_request_channel(device_data->dma.mask,
+				    stedma40_filter,
+				    device_data->dma.cfg_mem2cryp);
+
+	device_data->dma.cfg_cryp2mem = engine_to_mem;
+	device_data->dma.chan_cryp2mem =
+		dma_request_channel(device_data->dma.mask,
+				    stedma40_filter,
+				    device_data->dma.cfg_cryp2mem);
+
+	dmaengine_slave_config(device_data->dma.chan_mem2cryp, &mem2cryp);
+	dmaengine_slave_config(device_data->dma.chan_cryp2mem, &cryp2mem);
+
+	init_completion(&device_data->dma.cryp_dma_complete);
+}
+
+static void cryp_dma_out_callback(void *data)
+{
+	struct cryp_ctx *ctx = (struct cryp_ctx *) data;
+	dev_dbg(ctx->device->dev, "[%s]: ", __func__);
+
+	complete(&ctx->device->dma.cryp_dma_complete);
+}
+
+static int cryp_set_dma_transfer(struct cryp_ctx *ctx,
+				 struct scatterlist *sg,
+				 int len,
+				 enum dma_data_direction direction)
+{
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *channel = NULL;
+	dma_cookie_t cookie;
+
+	dev_dbg(ctx->device->dev, "[%s]: ", __func__);
+
+	if (unlikely(!IS_ALIGNED((u32)sg, 4))) {
+		dev_err(ctx->device->dev, "[%s]: Data in sg list isn't "
+			"aligned! Addr: 0x%08x", __func__, (u32)sg);
+		return -EFAULT;
+	}
+
+	switch (direction) {
+	case DMA_TO_DEVICE:
+		channel = ctx->device->dma.chan_mem2cryp;
+		ctx->device->dma.sg_src = sg;
+		ctx->device->dma.sg_src_len = dma_map_sg(channel->device->dev,
+						 ctx->device->dma.sg_src,
+						 ctx->device->dma.nents_src,
+						 direction);
+
+		if (!ctx->device->dma.sg_src_len) {
+			dev_dbg(ctx->device->dev,
+				"[%s]: Could not map the sg list (TO_DEVICE)",
+				__func__);
+			return -EFAULT;
+		}
+
+		dev_dbg(ctx->device->dev, "[%s]: Setting up DMA for buffer "
+			"(TO_DEVICE)", __func__);
+
+		desc = dmaengine_prep_slave_sg(channel,
+				ctx->device->dma.sg_src,
+				ctx->device->dma.sg_src_len,
+				DMA_MEM_TO_DEV, DMA_CTRL_ACK);
+		break;
+
+	case DMA_FROM_DEVICE:
+		channel = ctx->device->dma.chan_cryp2mem;
+		ctx->device->dma.sg_dst = sg;
+		ctx->device->dma.sg_dst_len = dma_map_sg(channel->device->dev,
+						 ctx->device->dma.sg_dst,
+						 ctx->device->dma.nents_dst,
+						 direction);
+
+		if (!ctx->device->dma.sg_dst_len) {
+			dev_dbg(ctx->device->dev,
+				"[%s]: Could not map the sg list (FROM_DEVICE)",
+				__func__);
+			return -EFAULT;
+		}
+
+		dev_dbg(ctx->device->dev, "[%s]: Setting up DMA for buffer "
+			"(FROM_DEVICE)", __func__);
+
+		desc = dmaengine_prep_slave_sg(channel,
+				ctx->device->dma.sg_dst,
+				ctx->device->dma.sg_dst_len,
+				DMA_DEV_TO_MEM,
+				DMA_CTRL_ACK |
+				DMA_PREP_INTERRUPT);
+
+		desc->callback = cryp_dma_out_callback;
+		desc->callback_param = ctx;
+		break;
+
+	default:
+		dev_dbg(ctx->device->dev, "[%s]: Invalid DMA direction",
+			__func__);
+		return -EFAULT;
+	}
+
+	cookie = dmaengine_submit(desc);
+	dma_async_issue_pending(channel);
+
+	return 0;
+}
+
+static void cryp_dma_done(struct cryp_ctx *ctx)
+{
+	struct dma_chan *chan;
+
+	dev_dbg(ctx->device->dev, "[%s]: ", __func__);
+
+	chan = ctx->device->dma.chan_mem2cryp;
+	dmaengine_terminate_all(chan);
+	dma_unmap_sg(chan->device->dev, ctx->device->dma.sg_src,
+		     ctx->device->dma.sg_src_len, DMA_TO_DEVICE);
+
+	chan = ctx->device->dma.chan_cryp2mem;
+	dmaengine_terminate_all(chan);
+	dma_unmap_sg(chan->device->dev, ctx->device->dma.sg_dst,
+		     ctx->device->dma.sg_dst_len, DMA_FROM_DEVICE);
+}
+
+static int cryp_dma_write(struct cryp_ctx *ctx, struct scatterlist *sg,
+			  int len)
+{
+	int error = cryp_set_dma_transfer(ctx, sg, len, DMA_TO_DEVICE);
+	dev_dbg(ctx->device->dev, "[%s]: ", __func__);
+
+	if (error) {
+		dev_dbg(ctx->device->dev, "[%s]: cryp_set_dma_transfer() "
+			"failed", __func__);
+		return error;
+	}
+
+	return len;
+}
+
+static int cryp_dma_read(struct cryp_ctx *ctx, struct scatterlist *sg, int len)
+{
+	int error = cryp_set_dma_transfer(ctx, sg, len, DMA_FROM_DEVICE);
+	if (error) {
+		dev_dbg(ctx->device->dev, "[%s]: cryp_set_dma_transfer() "
+			"failed", __func__);
+		return error;
+	}
+
+	return len;
+}
+
+static void cryp_polling_mode(struct cryp_ctx *ctx,
+			      struct cryp_device_data *device_data)
+{
+	int len = ctx->blocksize / BYTES_PER_WORD;
+	int remaining_length = ctx->datalen;
+	u32 *indata = (u32 *)ctx->indata;
+	u32 *outdata = (u32 *)ctx->outdata;
+
+	while (remaining_length > 0) {
+		writesl(&device_data->base->din, indata, len);
+		indata += len;
+		remaining_length -= (len * BYTES_PER_WORD);
+		cryp_wait_until_done(device_data);
+
+		readsl(&device_data->base->dout, outdata, len);
+		outdata += len;
+		cryp_wait_until_done(device_data);
+	}
+}
+
+static int cryp_disable_power(struct device *dev,
+			      struct cryp_device_data *device_data,
+			      bool save_device_context)
+{
+	int ret = 0;
+
+	dev_dbg(dev, "[%s]", __func__);
+
+	spin_lock(&device_data->power_state_spinlock);
+	if (!device_data->power_state)
+		goto out;
+
+	spin_lock(&device_data->ctx_lock);
+	if (save_device_context && device_data->current_ctx) {
+		cryp_save_device_context(device_data,
+				&device_data->current_ctx->dev_ctx,
+				cryp_mode);
+		device_data->restore_dev_ctx = true;
+	}
+	spin_unlock(&device_data->ctx_lock);
+
+	clk_disable(device_data->clk);
+	ret = regulator_disable(device_data->pwr_regulator);
+	if (ret)
+		dev_err(dev, "[%s]: "
+				"regulator_disable() failed!",
+				__func__);
+
+	device_data->power_state = false;
+
+out:
+	spin_unlock(&device_data->power_state_spinlock);
+
+	return ret;
+}
+
+static int cryp_enable_power(
+		struct device *dev,
+		struct cryp_device_data *device_data,
+		bool restore_device_context)
+{
+	int ret = 0;
+
+	dev_dbg(dev, "[%s]", __func__);
+
+	spin_lock(&device_data->power_state_spinlock);
+	if (!device_data->power_state) {
+		ret = regulator_enable(device_data->pwr_regulator);
+		if (ret) {
+			dev_err(dev, "[%s]: regulator_enable() failed!",
+					__func__);
+			goto out;
+		}
+
+		ret = clk_enable(device_data->clk);
+		if (ret) {
+			dev_err(dev, "[%s]: clk_enable() failed!",
+					__func__);
+			regulator_disable(device_data->pwr_regulator);
+			goto out;
+		}
+		device_data->power_state = true;
+	}
+
+	if (device_data->restore_dev_ctx) {
+		spin_lock(&device_data->ctx_lock);
+		if (restore_device_context && device_data->current_ctx) {
+			device_data->restore_dev_ctx = false;
+			cryp_restore_device_context(device_data,
+					&device_data->current_ctx->dev_ctx);
+		}
+		spin_unlock(&device_data->ctx_lock);
+	}
+out:
+	spin_unlock(&device_data->power_state_spinlock);
+
+	return ret;
+}
+
+static int hw_crypt_noxts(struct cryp_ctx *ctx,
+			  struct cryp_device_data *device_data)
+{
+	int ret = 0;
+
+	const u8 *indata = ctx->indata;
+	u8 *outdata = ctx->outdata;
+	u32 datalen = ctx->datalen;
+	u32 outlen = datalen;
+
+	pr_debug(DEV_DBG_NAME " [%s]", __func__);
+
+	ctx->outlen = ctx->datalen;
+
+	if (unlikely(!IS_ALIGNED((u32)indata, 4))) {
+		pr_debug(DEV_DBG_NAME " [%s]: Data isn't aligned! Addr: "
+			 "0x%08x", __func__, (u32)indata);
+		return -EINVAL;
+	}
+
+	ret = cryp_setup_context(ctx, device_data);
+
+	if (ret)
+		goto out;
+
+	if (cryp_mode == CRYP_MODE_INTERRUPT) {
+		cryp_enable_irq_src(device_data, CRYP_IRQ_SRC_INPUT_FIFO |
+				    CRYP_IRQ_SRC_OUTPUT_FIFO);
+
+		/*
+		 * ctx->outlen is decremented in the cryp_interrupt_handler
+		 * function. We had to add cpu_relax() (barrier) to make sure
+		 * that gcc didn't optimze away this variable.
+		 */
+		while (ctx->outlen > 0)
+			cpu_relax();
+	} else if (cryp_mode == CRYP_MODE_POLLING ||
+		   cryp_mode == CRYP_MODE_DMA) {
+		/*
+		 * The reason for having DMA in this if case is that if we are
+		 * running cryp_mode = 2, then we separate DMA routines for
+		 * handling cipher/plaintext > blocksize, except when
+		 * running the normal CRYPTO_ALG_TYPE_CIPHER, then we still use
+		 * the polling mode. Overhead of doing DMA setup eats up the
+		 * benefits using it.
+		 */
+		cryp_polling_mode(ctx, device_data);
+	} else {
+		dev_err(ctx->device->dev, "[%s]: Invalid operation mode!",
+			__func__);
+		ret = -EPERM;
+		goto out;
+	}
+
+	cryp_save_device_context(device_data, &ctx->dev_ctx, cryp_mode);
+	ctx->updated = 1;
+
+out:
+	ctx->indata = indata;
+	ctx->outdata = outdata;
+	ctx->datalen = datalen;
+	ctx->outlen = outlen;
+
+	return ret;
+}
+
+static int get_nents(struct scatterlist *sg, int nbytes)
+{
+	int nents = 0;
+
+	while (nbytes > 0) {
+		nbytes -= sg->length;
+		sg = sg_next(sg);
+		nents++;
+	}
+
+	return nents;
+}
+
+static int ablk_dma_crypt(struct ablkcipher_request *areq)
+{
+	struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
+	struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher);
+	struct cryp_device_data *device_data;
+
+	int bytes_written = 0;
+	int bytes_read = 0;
+	int ret;
+
+	pr_debug(DEV_DBG_NAME " [%s]", __func__);
+
+	ctx->datalen = areq->nbytes;
+	ctx->outlen = areq->nbytes;
+
+	ret = cryp_get_device_data(ctx, &device_data);
+	if (ret)
+		return ret;
+
+	ret = cryp_setup_context(ctx, device_data);
+	if (ret)
+		goto out;
+
+	/* We have the device now, so store the nents in the dma struct. */
+	ctx->device->dma.nents_src = get_nents(areq->src, ctx->datalen);
+	ctx->device->dma.nents_dst = get_nents(areq->dst, ctx->outlen);
+
+	/* Enable DMA in- and output. */
+	cryp_configure_for_dma(device_data, CRYP_DMA_ENABLE_BOTH_DIRECTIONS);
+
+	bytes_written = cryp_dma_write(ctx, areq->src, ctx->datalen);
+	bytes_read = cryp_dma_read(ctx, areq->dst, bytes_written);
+
+	wait_for_completion(&ctx->device->dma.cryp_dma_complete);
+	cryp_dma_done(ctx);
+
+	cryp_save_device_context(device_data, &ctx->dev_ctx, cryp_mode);
+	ctx->updated = 1;
+
+out:
+	spin_lock(&device_data->ctx_lock);
+	device_data->current_ctx = NULL;
+	ctx->device = NULL;
+	spin_unlock(&device_data->ctx_lock);
+
+	/*
+	 * The down_interruptible part for this semaphore is called in
+	 * cryp_get_device_data.
+	 */
+	up(&driver_data.device_allocation);
+
+	if (unlikely(bytes_written != bytes_read))
+		return -EPERM;
+
+	return 0;
+}
+
+static int ablk_crypt(struct ablkcipher_request *areq)
+{
+	struct ablkcipher_walk walk;
+	struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
+	struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher);
+	struct cryp_device_data *device_data;
+	unsigned long src_paddr;
+	unsigned long dst_paddr;
+	int ret;
+	int nbytes;
+
+	pr_debug(DEV_DBG_NAME " [%s]", __func__);
+
+	ret = cryp_get_device_data(ctx, &device_data);
+	if (ret)
+		goto out;
+
+	ablkcipher_walk_init(&walk, areq->dst, areq->src, areq->nbytes);
+	ret = ablkcipher_walk_phys(areq, &walk);
+
+	if (ret) {
+		pr_err(DEV_DBG_NAME "[%s]: ablkcipher_walk_phys() failed!",
+			__func__);
+		goto out;
+	}
+
+	while ((nbytes = walk.nbytes) > 0) {
+		ctx->iv = walk.iv;
+		src_paddr = (page_to_phys(walk.src.page) + walk.src.offset);
+		ctx->indata = phys_to_virt(src_paddr);
+
+		dst_paddr = (page_to_phys(walk.dst.page) + walk.dst.offset);
+		ctx->outdata = phys_to_virt(dst_paddr);
+
+		ctx->datalen = nbytes - (nbytes % ctx->blocksize);
+
+		ret = hw_crypt_noxts(ctx, device_data);
+		if (ret)
+			goto out;
+
+		nbytes -= ctx->datalen;
+		ret = ablkcipher_walk_done(areq, &walk, nbytes);
+		if (ret)
+			goto out;
+	}
+	ablkcipher_walk_complete(&walk);
+
+out:
+	/* Release the device */
+	spin_lock(&device_data->ctx_lock);
+	device_data->current_ctx = NULL;
+	ctx->device = NULL;
+	spin_unlock(&device_data->ctx_lock);
+
+	/*
+	 * The down_interruptible part for this semaphore is called in
+	 * cryp_get_device_data.
+	 */
+	up(&driver_data.device_allocation);
+
+	return ret;
+}
+
+static int aes_ablkcipher_setkey(struct crypto_ablkcipher *cipher,
+				 const u8 *key, unsigned int keylen)
+{
+	struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher);
+	u32 *flags = &cipher->base.crt_flags;
+
+	pr_debug(DEV_DBG_NAME " [%s]", __func__);
+
+	switch (keylen) {
+	case AES_KEYSIZE_128:
+		ctx->config.keysize = CRYP_KEY_SIZE_128;
+		break;
+
+	case AES_KEYSIZE_192:
+		ctx->config.keysize = CRYP_KEY_SIZE_192;
+		break;
+
+	case AES_KEYSIZE_256:
+		ctx->config.keysize = CRYP_KEY_SIZE_256;
+		break;
+
+	default:
+		pr_err(DEV_DBG_NAME "[%s]: Unknown keylen!", __func__);
+		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		return -EINVAL;
+	}
+
+	memcpy(ctx->key, key, keylen);
+	ctx->keylen = keylen;
+
+	ctx->updated = 0;
+
+	return 0;
+}
+
+static int des_ablkcipher_setkey(struct crypto_ablkcipher *cipher,
+				 const u8 *key, unsigned int keylen)
+{
+	struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher);
+	u32 *flags = &cipher->base.crt_flags;
+	u32 tmp[DES_EXPKEY_WORDS];
+	int ret;
+
+	pr_debug(DEV_DBG_NAME " [%s]", __func__);
+	if (keylen != DES_KEY_SIZE) {
+		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		pr_debug(DEV_DBG_NAME " [%s]: CRYPTO_TFM_RES_BAD_KEY_LEN",
+				__func__);
+		return -EINVAL;
+	}
+
+	ret = des_ekey(tmp, key);
+	if (unlikely(ret == 0) && (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
+		*flags |= CRYPTO_TFM_RES_WEAK_KEY;
+		pr_debug(DEV_DBG_NAME " [%s]: CRYPTO_TFM_REQ_WEAK_KEY",
+				__func__);
+		return -EINVAL;
+	}
+
+	memcpy(ctx->key, key, keylen);
+	ctx->keylen = keylen;
+
+	ctx->updated = 0;
+	return 0;
+}
+
+static int des3_ablkcipher_setkey(struct crypto_ablkcipher *cipher,
+				  const u8 *key, unsigned int keylen)
+{
+	struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher);
+	u32 *flags = &cipher->base.crt_flags;
+	const u32 *K = (const u32 *)key;
+	u32 tmp[DES3_EDE_EXPKEY_WORDS];
+	int i, ret;
+
+	pr_debug(DEV_DBG_NAME " [%s]", __func__);
+	if (keylen != DES3_EDE_KEY_SIZE) {
+		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		pr_debug(DEV_DBG_NAME " [%s]: CRYPTO_TFM_RES_BAD_KEY_LEN",
+				__func__);
+		return -EINVAL;
+	}
+
+	/* Checking key interdependency for weak key detection. */
+	if (unlikely(!((K[0] ^ K[2]) | (K[1] ^ K[3])) ||
+				!((K[2] ^ K[4]) | (K[3] ^ K[5]))) &&
+			(*flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
+		*flags |= CRYPTO_TFM_RES_WEAK_KEY;
+		pr_debug(DEV_DBG_NAME " [%s]: CRYPTO_TFM_REQ_WEAK_KEY",
+				__func__);
+		return -EINVAL;
+	}
+	for (i = 0; i < 3; i++) {
+		ret = des_ekey(tmp, key + i*DES_KEY_SIZE);
+		if (unlikely(ret == 0) && (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
+			*flags |= CRYPTO_TFM_RES_WEAK_KEY;
+			pr_debug(DEV_DBG_NAME " [%s]: "
+					"CRYPTO_TFM_REQ_WEAK_KEY", __func__);
+			return -EINVAL;
+		}
+	}
+
+	memcpy(ctx->key, key, keylen);
+	ctx->keylen = keylen;
+
+	ctx->updated = 0;
+	return 0;
+}
+
+static int cryp_blk_encrypt(struct ablkcipher_request *areq)
+{
+	struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
+	struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher);
+
+	pr_debug(DEV_DBG_NAME " [%s]", __func__);
+
+	ctx->config.algodir = CRYP_ALGORITHM_ENCRYPT;
+
+	/*
+	 * DMA does not work for DES due to a hw bug */
+	if (cryp_mode == CRYP_MODE_DMA && mode_is_aes(ctx->config.algomode))
+		return ablk_dma_crypt(areq);
+
+	/* For everything except DMA, we run the non DMA version. */
+	return ablk_crypt(areq);
+}
+
+static int cryp_blk_decrypt(struct ablkcipher_request *areq)
+{
+	struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
+	struct cryp_ctx *ctx = crypto_ablkcipher_ctx(cipher);
+
+	pr_debug(DEV_DBG_NAME " [%s]", __func__);
+
+	ctx->config.algodir = CRYP_ALGORITHM_DECRYPT;
+
+	/* DMA does not work for DES due to a hw bug */
+	if (cryp_mode == CRYP_MODE_DMA && mode_is_aes(ctx->config.algomode))
+		return ablk_dma_crypt(areq);
+
+	/* For everything except DMA, we run the non DMA version. */
+	return ablk_crypt(areq);
+}
+
+struct cryp_algo_template {
+	enum cryp_algo_mode algomode;
+	struct crypto_alg crypto;
+};
+
+static int cryp_cra_init(struct crypto_tfm *tfm)
+{
+	struct cryp_ctx *ctx = crypto_tfm_ctx(tfm);
+	struct crypto_alg *alg = tfm->__crt_alg;
+	struct cryp_algo_template *cryp_alg = container_of(alg,
+			struct cryp_algo_template,
+			crypto);
+
+	ctx->config.algomode = cryp_alg->algomode;
+	ctx->blocksize = crypto_tfm_alg_blocksize(tfm);
+
+	return 0;
+}
+
+static struct cryp_algo_template cryp_algs[] = {
+	{
+		.algomode = CRYP_ALGO_AES_ECB,
+		.crypto = {
+			.cra_name = "aes",
+			.cra_driver_name = "aes-ux500",
+			.cra_priority =	300,
+			.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+					CRYPTO_ALG_ASYNC,
+			.cra_blocksize = AES_BLOCK_SIZE,
+			.cra_ctxsize = sizeof(struct cryp_ctx),
+			.cra_alignmask = 3,
+			.cra_type = &crypto_ablkcipher_type,
+			.cra_init = cryp_cra_init,
+			.cra_module = THIS_MODULE,
+			.cra_u = {
+				.ablkcipher = {
+					.min_keysize = AES_MIN_KEY_SIZE,
+					.max_keysize = AES_MAX_KEY_SIZE,
+					.setkey = aes_ablkcipher_setkey,
+					.encrypt = cryp_blk_encrypt,
+					.decrypt = cryp_blk_decrypt
+				}
+			}
+		}
+	},
+	{
+		.algomode = CRYP_ALGO_AES_ECB,
+		.crypto = {
+			.cra_name = "ecb(aes)",
+			.cra_driver_name = "ecb-aes-ux500",
+			.cra_priority = 300,
+			.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+					CRYPTO_ALG_ASYNC,
+			.cra_blocksize = AES_BLOCK_SIZE,
+			.cra_ctxsize = sizeof(struct cryp_ctx),
+			.cra_alignmask = 3,
+			.cra_type = &crypto_ablkcipher_type,
+			.cra_init = cryp_cra_init,
+			.cra_module = THIS_MODULE,
+			.cra_u = {
+				.ablkcipher = {
+					.min_keysize = AES_MIN_KEY_SIZE,
+					.max_keysize = AES_MAX_KEY_SIZE,
+					.setkey = aes_ablkcipher_setkey,
+					.encrypt = cryp_blk_encrypt,
+					.decrypt = cryp_blk_decrypt,
+				}
+			}
+		}
+	},
+	{
+		.algomode = CRYP_ALGO_AES_CBC,
+		.crypto = {
+			.cra_name = "cbc(aes)",
+			.cra_driver_name = "cbc-aes-ux500",
+			.cra_priority = 300,
+			.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+					CRYPTO_ALG_ASYNC,
+			.cra_blocksize = AES_BLOCK_SIZE,
+			.cra_ctxsize = sizeof(struct cryp_ctx),
+			.cra_alignmask = 3,
+			.cra_type = &crypto_ablkcipher_type,
+			.cra_init = cryp_cra_init,
+			.cra_module = THIS_MODULE,
+			.cra_u = {
+				.ablkcipher = {
+					.min_keysize = AES_MIN_KEY_SIZE,
+					.max_keysize = AES_MAX_KEY_SIZE,
+					.setkey = aes_ablkcipher_setkey,
+					.encrypt = cryp_blk_encrypt,
+					.decrypt = cryp_blk_decrypt,
+					.ivsize = AES_BLOCK_SIZE,
+				}
+			}
+		}
+	},
+	{
+		.algomode = CRYP_ALGO_AES_CTR,
+		.crypto = {
+			.cra_name = "ctr(aes)",
+			.cra_driver_name = "ctr-aes-ux500",
+			.cra_priority = 300,
+			.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+						CRYPTO_ALG_ASYNC,
+			.cra_blocksize = AES_BLOCK_SIZE,
+			.cra_ctxsize = sizeof(struct cryp_ctx),
+			.cra_alignmask = 3,
+			.cra_type = &crypto_ablkcipher_type,
+			.cra_init = cryp_cra_init,
+			.cra_module = THIS_MODULE,
+			.cra_u = {
+				.ablkcipher = {
+					.min_keysize = AES_MIN_KEY_SIZE,
+					.max_keysize = AES_MAX_KEY_SIZE,
+					.setkey = aes_ablkcipher_setkey,
+					.encrypt = cryp_blk_encrypt,
+					.decrypt = cryp_blk_decrypt,
+					.ivsize = AES_BLOCK_SIZE,
+				}
+			}
+		}
+	},
+	{
+		.algomode = CRYP_ALGO_DES_ECB,
+		.crypto = {
+			.cra_name = "des",
+			.cra_driver_name = "des-ux500",
+			.cra_priority = 300,
+			.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+						CRYPTO_ALG_ASYNC,
+			.cra_blocksize = DES_BLOCK_SIZE,
+			.cra_ctxsize = sizeof(struct cryp_ctx),
+			.cra_alignmask = 3,
+			.cra_type = &crypto_ablkcipher_type,
+			.cra_init = cryp_cra_init,
+			.cra_module = THIS_MODULE,
+			.cra_u = {
+				.ablkcipher = {
+					.min_keysize = DES_KEY_SIZE,
+					.max_keysize = DES_KEY_SIZE,
+					.setkey = des_ablkcipher_setkey,
+					.encrypt = cryp_blk_encrypt,
+					.decrypt = cryp_blk_decrypt
+				}
+			}
+		}
+
+	},
+	{
+		.algomode = CRYP_ALGO_TDES_ECB,
+		.crypto = {
+			.cra_name = "des3_ede",
+			.cra_driver_name = "des3_ede-ux500",
+			.cra_priority = 300,
+			.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+						CRYPTO_ALG_ASYNC,
+			.cra_blocksize = DES3_EDE_BLOCK_SIZE,
+			.cra_ctxsize = sizeof(struct cryp_ctx),
+			.cra_alignmask = 3,
+			.cra_type = &crypto_ablkcipher_type,
+			.cra_init = cryp_cra_init,
+			.cra_module = THIS_MODULE,
+			.cra_u = {
+				.ablkcipher = {
+					.min_keysize = DES3_EDE_KEY_SIZE,
+					.max_keysize = DES3_EDE_KEY_SIZE,
+					.setkey = des_ablkcipher_setkey,
+					.encrypt = cryp_blk_encrypt,
+					.decrypt = cryp_blk_decrypt
+				}
+			}
+		}
+	},
+	{
+		.algomode = CRYP_ALGO_DES_ECB,
+		.crypto = {
+			.cra_name = "ecb(des)",
+			.cra_driver_name = "ecb-des-ux500",
+			.cra_priority = 300,
+			.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+					CRYPTO_ALG_ASYNC,
+			.cra_blocksize = DES_BLOCK_SIZE,
+			.cra_ctxsize = sizeof(struct cryp_ctx),
+			.cra_alignmask = 3,
+			.cra_type = &crypto_ablkcipher_type,
+			.cra_init = cryp_cra_init,
+			.cra_module = THIS_MODULE,
+			.cra_u = {
+				.ablkcipher = {
+					.min_keysize = DES_KEY_SIZE,
+					.max_keysize = DES_KEY_SIZE,
+					.setkey = des_ablkcipher_setkey,
+					.encrypt = cryp_blk_encrypt,
+					.decrypt = cryp_blk_decrypt,
+				}
+			}
+		}
+	},
+	{
+		.algomode = CRYP_ALGO_TDES_ECB,
+		.crypto = {
+			.cra_name = "ecb(des3_ede)",
+			.cra_driver_name = "ecb-des3_ede-ux500",
+			.cra_priority = 300,
+			.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+					CRYPTO_ALG_ASYNC,
+			.cra_blocksize = DES3_EDE_BLOCK_SIZE,
+			.cra_ctxsize = sizeof(struct cryp_ctx),
+			.cra_alignmask = 3,
+			.cra_type = &crypto_ablkcipher_type,
+			.cra_init = cryp_cra_init,
+			.cra_module = THIS_MODULE,
+			.cra_u = {
+				.ablkcipher = {
+					.min_keysize = DES3_EDE_KEY_SIZE,
+					.max_keysize = DES3_EDE_KEY_SIZE,
+					.setkey = des3_ablkcipher_setkey,
+					.encrypt = cryp_blk_encrypt,
+					.decrypt = cryp_blk_decrypt,
+				}
+			}
+		}
+	},
+	{
+		.algomode = CRYP_ALGO_DES_CBC,
+		.crypto = {
+			.cra_name = "cbc(des)",
+			.cra_driver_name = "cbc-des-ux500",
+			.cra_priority = 300,
+			.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+					CRYPTO_ALG_ASYNC,
+			.cra_blocksize = DES_BLOCK_SIZE,
+			.cra_ctxsize = sizeof(struct cryp_ctx),
+			.cra_alignmask = 3,
+			.cra_type = &crypto_ablkcipher_type,
+			.cra_init = cryp_cra_init,
+			.cra_module = THIS_MODULE,
+			.cra_u = {
+				.ablkcipher = {
+					.min_keysize = DES_KEY_SIZE,
+					.max_keysize = DES_KEY_SIZE,
+					.setkey = des_ablkcipher_setkey,
+					.encrypt = cryp_blk_encrypt,
+					.decrypt = cryp_blk_decrypt,
+				}
+			}
+		}
+	},
+	{
+		.algomode = CRYP_ALGO_TDES_CBC,
+		.crypto = {
+			.cra_name = "cbc(des3_ede)",
+			.cra_driver_name = "cbc-des3_ede-ux500",
+			.cra_priority = 300,
+			.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+					CRYPTO_ALG_ASYNC,
+			.cra_blocksize = DES3_EDE_BLOCK_SIZE,
+			.cra_ctxsize = sizeof(struct cryp_ctx),
+			.cra_alignmask = 3,
+			.cra_type = &crypto_ablkcipher_type,
+			.cra_init = cryp_cra_init,
+			.cra_module = THIS_MODULE,
+			.cra_u = {
+				.ablkcipher = {
+					.min_keysize = DES3_EDE_KEY_SIZE,
+					.max_keysize = DES3_EDE_KEY_SIZE,
+					.setkey = des3_ablkcipher_setkey,
+					.encrypt = cryp_blk_encrypt,
+					.decrypt = cryp_blk_decrypt,
+					.ivsize = DES3_EDE_BLOCK_SIZE,
+				}
+			}
+		}
+	}
+};
+
+/**
+ * cryp_algs_register_all -
+ */
+static int cryp_algs_register_all(void)
+{
+	int ret;
+	int i;
+	int count;
+
+	pr_debug("[%s]", __func__);
+
+	for (i = 0; i < ARRAY_SIZE(cryp_algs); i++) {
+		ret = crypto_register_alg(&cryp_algs[i].crypto);
+		if (ret) {
+			count = i;
+			pr_err("[%s] alg registration failed",
+					cryp_algs[i].crypto.cra_driver_name);
+			goto unreg;
+		}
+	}
+	return 0;
+unreg:
+	for (i = 0; i < count; i++)
+		crypto_unregister_alg(&cryp_algs[i].crypto);
+	return ret;
+}
+
+/**
+ * cryp_algs_unregister_all -
+ */
+static void cryp_algs_unregister_all(void)
+{
+	int i;
+
+	pr_debug(DEV_DBG_NAME " [%s]", __func__);
+
+	for (i = 0; i < ARRAY_SIZE(cryp_algs); i++)
+		crypto_unregister_alg(&cryp_algs[i].crypto);
+}
+
+static int ux500_cryp_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct resource *res;
+	struct resource *res_irq;
+	struct cryp_device_data *device_data;
+	struct cryp_protection_config prot = {
+		.privilege_access = CRYP_STATE_ENABLE
+	};
+	struct device *dev = &pdev->dev;
+
+	dev_dbg(dev, "[%s]", __func__);
+	device_data = devm_kzalloc(dev, sizeof(*device_data), GFP_ATOMIC);
+	if (!device_data) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	device_data->dev = dev;
+	device_data->current_ctx = NULL;
+
+	/* Grab the DMA configuration from platform data. */
+	mem_to_engine = &((struct cryp_platform_data *)
+			 dev->platform_data)->mem_to_engine;
+	engine_to_mem = &((struct cryp_platform_data *)
+			 dev->platform_data)->engine_to_mem;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "[%s]: platform_get_resource() failed",
+				__func__);
+		ret = -ENODEV;
+		goto out;
+	}
+
+	device_data->phybase = res->start;
+	device_data->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(device_data->base)) {
+		dev_err(dev, "[%s]: ioremap failed!", __func__);
+		ret = PTR_ERR(device_data->base);
+		goto out;
+	}
+
+	spin_lock_init(&device_data->ctx_lock);
+	spin_lock_init(&device_data->power_state_spinlock);
+
+	/* Enable power for CRYP hardware block */
+	device_data->pwr_regulator = regulator_get(&pdev->dev, "v-ape");
+	if (IS_ERR(device_data->pwr_regulator)) {
+		dev_err(dev, "[%s]: could not get cryp regulator", __func__);
+		ret = PTR_ERR(device_data->pwr_regulator);
+		device_data->pwr_regulator = NULL;
+		goto out;
+	}
+
+	/* Enable the clk for CRYP hardware block */
+	device_data->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(device_data->clk)) {
+		dev_err(dev, "[%s]: clk_get() failed!", __func__);
+		ret = PTR_ERR(device_data->clk);
+		goto out_regulator;
+	}
+
+	ret = clk_prepare(device_data->clk);
+	if (ret) {
+		dev_err(dev, "[%s]: clk_prepare() failed!", __func__);
+		goto out_regulator;
+	}
+
+	/* Enable device power (and clock) */
+	ret = cryp_enable_power(device_data->dev, device_data, false);
+	if (ret) {
+		dev_err(dev, "[%s]: cryp_enable_power() failed!", __func__);
+		goto out_clk_unprepare;
+	}
+
+	if (cryp_check(device_data)) {
+		dev_err(dev, "[%s]: cryp_check() failed!", __func__);
+		ret = -EINVAL;
+		goto out_power;
+	}
+
+	if (cryp_configure_protection(device_data, &prot)) {
+		dev_err(dev, "[%s]: cryp_configure_protection() failed!",
+			__func__);
+		ret = -EINVAL;
+		goto out_power;
+	}
+
+	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res_irq) {
+		dev_err(dev, "[%s]: IORESOURCE_IRQ unavailable",
+			__func__);
+		ret = -ENODEV;
+		goto out_power;
+	}
+
+	ret = devm_request_irq(&pdev->dev, res_irq->start,
+			       cryp_interrupt_handler, 0, "cryp1", device_data);
+	if (ret) {
+		dev_err(dev, "[%s]: Unable to request IRQ", __func__);
+		goto out_power;
+	}
+
+	if (cryp_mode == CRYP_MODE_DMA)
+		cryp_dma_setup_channel(device_data, dev);
+
+	platform_set_drvdata(pdev, device_data);
+
+	/* Put the new device into the device list... */
+	klist_add_tail(&device_data->list_node, &driver_data.device_list);
+
+	/* ... and signal that a new device is available. */
+	up(&driver_data.device_allocation);
+
+	atomic_set(&session_id, 1);
+
+	ret = cryp_algs_register_all();
+	if (ret) {
+		dev_err(dev, "[%s]: cryp_algs_register_all() failed!",
+			__func__);
+		goto out_power;
+	}
+
+	dev_info(dev, "successfully registered\n");
+
+	return 0;
+
+out_power:
+	cryp_disable_power(device_data->dev, device_data, false);
+
+out_clk_unprepare:
+	clk_unprepare(device_data->clk);
+
+out_regulator:
+	regulator_put(device_data->pwr_regulator);
+
+out:
+	return ret;
+}
+
+static int ux500_cryp_remove(struct platform_device *pdev)
+{
+	struct cryp_device_data *device_data;
+
+	dev_dbg(&pdev->dev, "[%s]", __func__);
+	device_data = platform_get_drvdata(pdev);
+	if (!device_data) {
+		dev_err(&pdev->dev, "[%s]: platform_get_drvdata() failed!",
+			__func__);
+		return -ENOMEM;
+	}
+
+	/* Try to decrease the number of available devices. */
+	if (down_trylock(&driver_data.device_allocation))
+		return -EBUSY;
+
+	/* Check that the device is free */
+	spin_lock(&device_data->ctx_lock);
+	/* current_ctx allocates a device, NULL = unallocated */
+	if (device_data->current_ctx) {
+		/* The device is busy */
+		spin_unlock(&device_data->ctx_lock);
+		/* Return the device to the pool. */
+		up(&driver_data.device_allocation);
+		return -EBUSY;
+	}
+
+	spin_unlock(&device_data->ctx_lock);
+
+	/* Remove the device from the list */
+	if (klist_node_attached(&device_data->list_node))
+		klist_remove(&device_data->list_node);
+
+	/* If this was the last device, remove the services */
+	if (list_empty(&driver_data.device_list.k_list))
+		cryp_algs_unregister_all();
+
+	if (cryp_disable_power(&pdev->dev, device_data, false))
+		dev_err(&pdev->dev, "[%s]: cryp_disable_power() failed",
+			__func__);
+
+	clk_unprepare(device_data->clk);
+	regulator_put(device_data->pwr_regulator);
+
+	return 0;
+}
+
+static void ux500_cryp_shutdown(struct platform_device *pdev)
+{
+	struct cryp_device_data *device_data;
+
+	dev_dbg(&pdev->dev, "[%s]", __func__);
+
+	device_data = platform_get_drvdata(pdev);
+	if (!device_data) {
+		dev_err(&pdev->dev, "[%s]: platform_get_drvdata() failed!",
+			__func__);
+		return;
+	}
+
+	/* Check that the device is free */
+	spin_lock(&device_data->ctx_lock);
+	/* current_ctx allocates a device, NULL = unallocated */
+	if (!device_data->current_ctx) {
+		if (down_trylock(&driver_data.device_allocation))
+			dev_dbg(&pdev->dev, "[%s]: Cryp still in use!"
+				"Shutting down anyway...", __func__);
+		/**
+		 * (Allocate the device)
+		 * Need to set this to non-null (dummy) value,
+		 * to avoid usage if context switching.
+		 */
+		device_data->current_ctx++;
+	}
+	spin_unlock(&device_data->ctx_lock);
+
+	/* Remove the device from the list */
+	if (klist_node_attached(&device_data->list_node))
+		klist_remove(&device_data->list_node);
+
+	/* If this was the last device, remove the services */
+	if (list_empty(&driver_data.device_list.k_list))
+		cryp_algs_unregister_all();
+
+	if (cryp_disable_power(&pdev->dev, device_data, false))
+		dev_err(&pdev->dev, "[%s]: cryp_disable_power() failed",
+			__func__);
+
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ux500_cryp_suspend(struct device *dev)
+{
+	int ret;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct cryp_device_data *device_data;
+	struct resource *res_irq;
+	struct cryp_ctx *temp_ctx = NULL;
+
+	dev_dbg(dev, "[%s]", __func__);
+
+	/* Handle state? */
+	device_data = platform_get_drvdata(pdev);
+	if (!device_data) {
+		dev_err(dev, "[%s]: platform_get_drvdata() failed!", __func__);
+		return -ENOMEM;
+	}
+
+	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res_irq)
+		dev_err(dev, "[%s]: IORESOURCE_IRQ, unavailable", __func__);
+	else
+		disable_irq(res_irq->start);
+
+	spin_lock(&device_data->ctx_lock);
+	if (!device_data->current_ctx)
+		device_data->current_ctx++;
+	spin_unlock(&device_data->ctx_lock);
+
+	if (device_data->current_ctx == ++temp_ctx) {
+		if (down_interruptible(&driver_data.device_allocation))
+			dev_dbg(dev, "[%s]: down_interruptible() failed",
+				__func__);
+		ret = cryp_disable_power(dev, device_data, false);
+
+	} else
+		ret = cryp_disable_power(dev, device_data, true);
+
+	if (ret)
+		dev_err(dev, "[%s]: cryp_disable_power()", __func__);
+
+	return ret;
+}
+
+static int ux500_cryp_resume(struct device *dev)
+{
+	int ret = 0;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct cryp_device_data *device_data;
+	struct resource *res_irq;
+	struct cryp_ctx *temp_ctx = NULL;
+
+	dev_dbg(dev, "[%s]", __func__);
+
+	device_data = platform_get_drvdata(pdev);
+	if (!device_data) {
+		dev_err(dev, "[%s]: platform_get_drvdata() failed!", __func__);
+		return -ENOMEM;
+	}
+
+	spin_lock(&device_data->ctx_lock);
+	if (device_data->current_ctx == ++temp_ctx)
+		device_data->current_ctx = NULL;
+	spin_unlock(&device_data->ctx_lock);
+
+
+	if (!device_data->current_ctx)
+		up(&driver_data.device_allocation);
+	else
+		ret = cryp_enable_power(dev, device_data, true);
+
+	if (ret)
+		dev_err(dev, "[%s]: cryp_enable_power() failed!", __func__);
+	else {
+		res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+		if (res_irq)
+			enable_irq(res_irq->start);
+	}
+
+	return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ux500_cryp_pm, ux500_cryp_suspend, ux500_cryp_resume);
+
+static const struct of_device_id ux500_cryp_match[] = {
+	{ .compatible = "stericsson,ux500-cryp" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ux500_cryp_match);
+
+static struct platform_driver cryp_driver = {
+	.probe  = ux500_cryp_probe,
+	.remove = ux500_cryp_remove,
+	.shutdown = ux500_cryp_shutdown,
+	.driver = {
+		.name  = "cryp1",
+		.of_match_table = ux500_cryp_match,
+		.pm    = &ux500_cryp_pm,
+	}
+};
+
+static int __init ux500_cryp_mod_init(void)
+{
+	pr_debug("[%s] is called!", __func__);
+	klist_init(&driver_data.device_list, NULL, NULL);
+	/* Initialize the semaphore to 0 devices (locked state) */
+	sema_init(&driver_data.device_allocation, 0);
+	return platform_driver_register(&cryp_driver);
+}
+
+static void __exit ux500_cryp_mod_fini(void)
+{
+	pr_debug("[%s] is called!", __func__);
+	platform_driver_unregister(&cryp_driver);
+}
+
+module_init(ux500_cryp_mod_init);
+module_exit(ux500_cryp_mod_fini);
+
+module_param(cryp_mode, int, 0);
+
+MODULE_DESCRIPTION("Driver for ST-Ericsson UX500 CRYP crypto engine.");
+MODULE_ALIAS_CRYPTO("aes-all");
+MODULE_ALIAS_CRYPTO("des-all");
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/crypto/ux500/cryp/cryp_irq.c b/drivers/crypto/ux500/cryp/cryp_irq.c
new file mode 100644
index 000000000..08d291cdb
--- /dev/null
+++ b/drivers/crypto/ux500/cryp/cryp_irq.c
@@ -0,0 +1,45 @@
+/**
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson.
+ * Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson.
+ * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson.
+ * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson.
+ * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL) version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/bitmap.h>
+#include <linux/device.h>
+
+#include "cryp.h"
+#include "cryp_p.h"
+#include "cryp_irq.h"
+#include "cryp_irqp.h"
+
+void cryp_enable_irq_src(struct cryp_device_data *device_data, u32 irq_src)
+{
+	u32 i;
+
+	dev_dbg(device_data->dev, "[%s]", __func__);
+
+	i = readl_relaxed(&device_data->base->imsc);
+	i = i | irq_src;
+	writel_relaxed(i, &device_data->base->imsc);
+}
+
+void cryp_disable_irq_src(struct cryp_device_data *device_data, u32 irq_src)
+{
+	u32 i;
+
+	dev_dbg(device_data->dev, "[%s]", __func__);
+
+	i = readl_relaxed(&device_data->base->imsc);
+	i = i & ~irq_src;
+	writel_relaxed(i, &device_data->base->imsc);
+}
+
+bool cryp_pending_irq_src(struct cryp_device_data *device_data, u32 irq_src)
+{
+	return (readl_relaxed(&device_data->base->mis) & irq_src) > 0;
+}
diff --git a/drivers/crypto/ux500/cryp/cryp_irq.h b/drivers/crypto/ux500/cryp/cryp_irq.h
new file mode 100644
index 000000000..5a7837f1b
--- /dev/null
+++ b/drivers/crypto/ux500/cryp/cryp_irq.h
@@ -0,0 +1,31 @@
+/**
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson.
+ * Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson.
+ * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson.
+ * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson.
+ * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef _CRYP_IRQ_H_
+#define _CRYP_IRQ_H_
+
+#include "cryp.h"
+
+enum cryp_irq_src_id {
+	CRYP_IRQ_SRC_INPUT_FIFO = 0x1,
+	CRYP_IRQ_SRC_OUTPUT_FIFO = 0x2,
+	CRYP_IRQ_SRC_ALL = 0x3
+};
+
+/**
+ * M0 Funtions
+ */
+void cryp_enable_irq_src(struct cryp_device_data *device_data, u32 irq_src);
+
+void cryp_disable_irq_src(struct cryp_device_data *device_data, u32 irq_src);
+
+bool cryp_pending_irq_src(struct cryp_device_data *device_data, u32 irq_src);
+
+#endif				/* _CRYP_IRQ_H_ */
diff --git a/drivers/crypto/ux500/cryp/cryp_irqp.h b/drivers/crypto/ux500/cryp/cryp_irqp.h
new file mode 100644
index 000000000..8b339cc34
--- /dev/null
+++ b/drivers/crypto/ux500/cryp/cryp_irqp.h
@@ -0,0 +1,125 @@
+/**
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson.
+ * Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson.
+ * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson.
+ * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson.
+ * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __CRYP_IRQP_H_
+#define __CRYP_IRQP_H_
+
+#include "cryp_irq.h"
+
+/**
+ *
+ * CRYP Registers - Offset mapping
+ *     +-----------------+
+ * 00h | CRYP_CR         |  Configuration register
+ *     +-----------------+
+ * 04h | CRYP_SR         |  Status register
+ *     +-----------------+
+ * 08h | CRYP_DIN        |  Data In register
+ *     +-----------------+
+ * 0ch | CRYP_DOUT       |  Data out register
+ *     +-----------------+
+ * 10h | CRYP_DMACR      |  DMA control register
+ *     +-----------------+
+ * 14h | CRYP_IMSC       |  IMSC
+ *     +-----------------+
+ * 18h | CRYP_RIS        |  Raw interrupt status
+ *     +-----------------+
+ * 1ch | CRYP_MIS        |  Masked interrupt status.
+ *     +-----------------+
+ *       Key registers
+ *       IVR registers
+ *       Peripheral
+ *       Cell IDs
+ *
+ *       Refer data structure for other register map
+ */
+
+/**
+ * struct cryp_register
+ * @cr			- Configuration register
+ * @status		- Status register
+ * @din			- Data input register
+ * @din_size		- Data input size register
+ * @dout		- Data output register
+ * @dout_size		- Data output size register
+ * @dmacr		- Dma control register
+ * @imsc		- Interrupt mask set/clear register
+ * @ris			- Raw interrupt status
+ * @mis			- Masked interrupt statu register
+ * @key_1_l		- Key register 1 L
+ * @key_1_r		- Key register 1 R
+ * @key_2_l		- Key register 2 L
+ * @key_2_r		- Key register 2 R
+ * @key_3_l		- Key register 3 L
+ * @key_3_r		- Key register 3 R
+ * @key_4_l		- Key register 4 L
+ * @key_4_r		- Key register 4 R
+ * @init_vect_0_l	- init vector 0 L
+ * @init_vect_0_r	- init vector 0 R
+ * @init_vect_1_l	- init vector 1 L
+ * @init_vect_1_r	- init vector 1 R
+ * @cryp_unused1	- unused registers
+ * @itcr		- Integration test control register
+ * @itip		- Integration test input register
+ * @itop		- Integration test output register
+ * @cryp_unused2	- unused registers
+ * @periphId0		- FE0 CRYP Peripheral Identication Register
+ * @periphId1		- FE4
+ * @periphId2		- FE8
+ * @periphId3		- FEC
+ * @pcellId0		- FF0  CRYP PCell Identication Register
+ * @pcellId1		- FF4
+ * @pcellId2		- FF8
+ * @pcellId3		- FFC
+ */
+struct cryp_register {
+	u32 cr;			/* Configuration register   */
+	u32 sr;			/* Status register          */
+	u32 din;		/* Data input register      */
+	u32 din_size;		/* Data input size register */
+	u32 dout;		/* Data output register     */
+	u32 dout_size;		/* Data output size register */
+	u32 dmacr;		/* Dma control register     */
+	u32 imsc;		/* Interrupt mask set/clear register */
+	u32 ris;		/* Raw interrupt status             */
+	u32 mis;		/* Masked interrupt statu register  */
+
+	u32 key_1_l;		/*Key register 1 L */
+	u32 key_1_r;		/*Key register 1 R */
+	u32 key_2_l;		/*Key register 2 L */
+	u32 key_2_r;		/*Key register 2 R */
+	u32 key_3_l;		/*Key register 3 L */
+	u32 key_3_r;		/*Key register 3 R */
+	u32 key_4_l;		/*Key register 4 L */
+	u32 key_4_r;		/*Key register 4 R */
+
+	u32 init_vect_0_l;	/*init vector 0 L */
+	u32 init_vect_0_r;	/*init vector 0 R */
+	u32 init_vect_1_l;	/*init vector 1 L */
+	u32 init_vect_1_r;	/*init vector 1 R */
+
+	u32 cryp_unused1[(0x80 - 0x58) / sizeof(u32)];	/* unused registers */
+	u32 itcr;		/*Integration test control register */
+	u32 itip;		/*Integration test input register */
+	u32 itop;		/*Integration test output register */
+	u32 cryp_unused2[(0xFE0 - 0x8C) / sizeof(u32)];	/* unused registers */
+
+	u32 periphId0;		/* FE0  CRYP Peripheral Identication Register */
+	u32 periphId1;		/* FE4 */
+	u32 periphId2;		/* FE8 */
+	u32 periphId3;		/* FEC */
+
+	u32 pcellId0;		/* FF0  CRYP PCell Identication Register */
+	u32 pcellId1;		/* FF4 */
+	u32 pcellId2;		/* FF8 */
+	u32 pcellId3;		/* FFC */
+};
+
+#endif
diff --git a/drivers/crypto/ux500/cryp/cryp_p.h b/drivers/crypto/ux500/cryp/cryp_p.h
new file mode 100644
index 000000000..6dcffe15c
--- /dev/null
+++ b/drivers/crypto/ux500/cryp/cryp_p.h
@@ -0,0 +1,123 @@
+/**
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson.
+ * Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson.
+ * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson.
+ * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson.
+ * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef _CRYP_P_H_
+#define _CRYP_P_H_
+
+#include <linux/io.h>
+#include <linux/bitops.h>
+
+#include "cryp.h"
+#include "cryp_irqp.h"
+
+/**
+ * Generic Macros
+ */
+#define CRYP_SET_BITS(reg_name, mask) \
+	writel_relaxed((readl_relaxed(reg_name) | mask), reg_name)
+
+#define CRYP_WRITE_BIT(reg_name, val, mask) \
+	writel_relaxed(((readl_relaxed(reg_name) & ~(mask)) |\
+			((val) & (mask))), reg_name)
+
+#define CRYP_TEST_BITS(reg_name, val) \
+	(readl_relaxed(reg_name) & (val))
+
+#define CRYP_PUT_BITS(reg, val, shift, mask) \
+	writel_relaxed(((readl_relaxed(reg) & ~(mask)) | \
+		(((u32)val << shift) & (mask))), reg)
+
+/**
+ * CRYP specific Macros
+ */
+#define CRYP_PERIPHERAL_ID0		0xE3
+#define CRYP_PERIPHERAL_ID1		0x05
+
+#define CRYP_PERIPHERAL_ID2_DB8500	0x28
+#define CRYP_PERIPHERAL_ID3		0x00
+
+#define CRYP_PCELL_ID0			0x0D
+#define CRYP_PCELL_ID1			0xF0
+#define CRYP_PCELL_ID2			0x05
+#define CRYP_PCELL_ID3			0xB1
+
+/**
+ * CRYP register default values
+ */
+#define MAX_DEVICE_SUPPORT		2
+
+/* Priv set, keyrden set and datatype 8bits swapped set as default. */
+#define CRYP_CR_DEFAULT			0x0482
+#define CRYP_DMACR_DEFAULT		0x0
+#define CRYP_IMSC_DEFAULT		0x0
+#define CRYP_DIN_DEFAULT		0x0
+#define CRYP_DOUT_DEFAULT		0x0
+#define CRYP_KEY_DEFAULT		0x0
+#define CRYP_INIT_VECT_DEFAULT		0x0
+
+/**
+ * CRYP Control register specific mask
+ */
+#define CRYP_CR_SECURE_MASK		BIT(0)
+#define CRYP_CR_PRLG_MASK		BIT(1)
+#define CRYP_CR_ALGODIR_MASK		BIT(2)
+#define CRYP_CR_ALGOMODE_MASK		(BIT(5) | BIT(4) | BIT(3))
+#define CRYP_CR_DATATYPE_MASK		(BIT(7) | BIT(6))
+#define CRYP_CR_KEYSIZE_MASK		(BIT(9) | BIT(8))
+#define CRYP_CR_KEYRDEN_MASK		BIT(10)
+#define CRYP_CR_KSE_MASK		BIT(11)
+#define CRYP_CR_START_MASK		BIT(12)
+#define CRYP_CR_INIT_MASK		BIT(13)
+#define CRYP_CR_FFLUSH_MASK		BIT(14)
+#define CRYP_CR_CRYPEN_MASK		BIT(15)
+#define CRYP_CR_CONTEXT_SAVE_MASK	(CRYP_CR_SECURE_MASK |\
+					 CRYP_CR_PRLG_MASK |\
+					 CRYP_CR_ALGODIR_MASK |\
+					 CRYP_CR_ALGOMODE_MASK |\
+					 CRYP_CR_DATATYPE_MASK |\
+					 CRYP_CR_KEYSIZE_MASK |\
+					 CRYP_CR_KEYRDEN_MASK |\
+					 CRYP_CR_DATATYPE_MASK)
+
+
+#define CRYP_SR_INFIFO_READY_MASK	(BIT(0) | BIT(1))
+#define CRYP_SR_IFEM_MASK		BIT(0)
+#define CRYP_SR_BUSY_MASK		BIT(4)
+
+/**
+ * Bit position used while setting bits in register
+ */
+#define CRYP_CR_PRLG_POS		1
+#define CRYP_CR_ALGODIR_POS		2
+#define CRYP_CR_ALGOMODE_POS		3
+#define CRYP_CR_DATATYPE_POS		6
+#define CRYP_CR_KEYSIZE_POS		8
+#define CRYP_CR_KEYRDEN_POS		10
+#define CRYP_CR_KSE_POS			11
+#define CRYP_CR_START_POS		12
+#define CRYP_CR_INIT_POS		13
+#define CRYP_CR_CRYPEN_POS		15
+
+#define CRYP_SR_BUSY_POS		4
+
+/**
+ * CRYP PCRs------PC_NAND control register
+ * BIT_MASK
+ */
+#define CRYP_DMA_REQ_MASK		(BIT(1) | BIT(0))
+#define CRYP_DMA_REQ_MASK_POS		0
+
+
+struct cryp_system_context {
+	/* CRYP Register structure */
+	struct cryp_register *p_cryp_reg[MAX_DEVICE_SUPPORT];
+};
+
+#endif
diff --git a/drivers/crypto/ux500/hash/Makefile b/drivers/crypto/ux500/hash/Makefile
new file mode 100644
index 000000000..784d9c0a8
--- /dev/null
+++ b/drivers/crypto/ux500/hash/Makefile
@@ -0,0 +1,11 @@
+#
+# Copyright (C) ST-Ericsson SA 2010
+# Author: Shujuan Chen (shujuan.chen@stericsson.com)
+# License terms: GNU General Public License (GPL) version 2
+#
+ifdef CONFIG_CRYPTO_DEV_UX500_DEBUG
+CFLAGS_hash_core.o := -DDEBUG
+endif
+
+obj-$(CONFIG_CRYPTO_DEV_UX500_HASH) += ux500_hash.o
+ux500_hash-objs :=  hash_core.o
diff --git a/drivers/crypto/ux500/hash/hash_alg.h b/drivers/crypto/ux500/hash/hash_alg.h
new file mode 100644
index 000000000..be6eb54da
--- /dev/null
+++ b/drivers/crypto/ux500/hash/hash_alg.h
@@ -0,0 +1,398 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Shujuan Chen (shujuan.chen@stericsson.com)
+ * Author: Joakim Bech (joakim.xx.bech@stericsson.com)
+ * Author: Berne Hebark (berne.hebark@stericsson.com))
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef _HASH_ALG_H
+#define _HASH_ALG_H
+
+#include <linux/bitops.h>
+
+#define HASH_BLOCK_SIZE			64
+#define HASH_DMA_FIFO			4
+#define HASH_DMA_ALIGN_SIZE		4
+#define HASH_DMA_PERFORMANCE_MIN_SIZE	1024
+#define HASH_BYTES_PER_WORD		4
+
+/* Maximum value of the length's high word */
+#define HASH_HIGH_WORD_MAX_VAL		0xFFFFFFFFUL
+
+/* Power on Reset values HASH registers */
+#define HASH_RESET_CR_VALUE		0x0
+#define HASH_RESET_STR_VALUE		0x0
+
+/* Number of context swap registers */
+#define HASH_CSR_COUNT			52
+
+#define HASH_RESET_CSRX_REG_VALUE	0x0
+#define HASH_RESET_CSFULL_REG_VALUE	0x0
+#define HASH_RESET_CSDATAIN_REG_VALUE	0x0
+
+#define HASH_RESET_INDEX_VAL		0x0
+#define HASH_RESET_BIT_INDEX_VAL	0x0
+#define HASH_RESET_BUFFER_VAL		0x0
+#define HASH_RESET_LEN_HIGH_VAL		0x0
+#define HASH_RESET_LEN_LOW_VAL		0x0
+
+/* Control register bitfields */
+#define HASH_CR_RESUME_MASK	0x11FCF
+
+#define HASH_CR_SWITCHON_POS	31
+#define HASH_CR_SWITCHON_MASK	BIT(31)
+
+#define HASH_CR_EMPTYMSG_POS	20
+#define HASH_CR_EMPTYMSG_MASK	BIT(20)
+
+#define HASH_CR_DINF_POS	12
+#define HASH_CR_DINF_MASK	BIT(12)
+
+#define HASH_CR_NBW_POS		8
+#define HASH_CR_NBW_MASK	0x00000F00UL
+
+#define HASH_CR_LKEY_POS	16
+#define HASH_CR_LKEY_MASK	BIT(16)
+
+#define HASH_CR_ALGO_POS	7
+#define HASH_CR_ALGO_MASK	BIT(7)
+
+#define HASH_CR_MODE_POS	6
+#define HASH_CR_MODE_MASK	BIT(6)
+
+#define HASH_CR_DATAFORM_POS	4
+#define HASH_CR_DATAFORM_MASK	(BIT(4) | BIT(5))
+
+#define HASH_CR_DMAE_POS	3
+#define HASH_CR_DMAE_MASK	BIT(3)
+
+#define HASH_CR_INIT_POS	2
+#define HASH_CR_INIT_MASK	BIT(2)
+
+#define HASH_CR_PRIVN_POS	1
+#define HASH_CR_PRIVN_MASK	BIT(1)
+
+#define HASH_CR_SECN_POS	0
+#define HASH_CR_SECN_MASK	BIT(0)
+
+/* Start register bitfields */
+#define HASH_STR_DCAL_POS	8
+#define HASH_STR_DCAL_MASK	BIT(8)
+#define HASH_STR_DEFAULT	0x0
+
+#define HASH_STR_NBLW_POS	0
+#define HASH_STR_NBLW_MASK	0x0000001FUL
+
+#define HASH_NBLW_MAX_VAL	0x1F
+
+/* PrimeCell IDs */
+#define HASH_P_ID0		0xE0
+#define HASH_P_ID1		0x05
+#define HASH_P_ID2		0x38
+#define HASH_P_ID3		0x00
+#define HASH_CELL_ID0		0x0D
+#define HASH_CELL_ID1		0xF0
+#define HASH_CELL_ID2		0x05
+#define HASH_CELL_ID3		0xB1
+
+#define HASH_SET_BITS(reg_name, mask)	\
+	writel_relaxed((readl_relaxed(reg_name) | mask), reg_name)
+
+#define HASH_CLEAR_BITS(reg_name, mask)	\
+	writel_relaxed((readl_relaxed(reg_name) & ~mask), reg_name)
+
+#define HASH_PUT_BITS(reg, val, shift, mask)	\
+	writel_relaxed(((readl(reg) & ~(mask)) |	\
+		(((u32)val << shift) & (mask))), reg)
+
+#define HASH_SET_DIN(val, len)	writesl(&device_data->base->din, (val), (len))
+
+#define HASH_INITIALIZE			\
+	HASH_PUT_BITS(			\
+		&device_data->base->cr,	\
+		0x01, HASH_CR_INIT_POS,	\
+		HASH_CR_INIT_MASK)
+
+#define HASH_SET_DATA_FORMAT(data_format)				\
+		HASH_PUT_BITS(						\
+			&device_data->base->cr,				\
+			(u32) (data_format), HASH_CR_DATAFORM_POS,	\
+			HASH_CR_DATAFORM_MASK)
+#define HASH_SET_NBLW(val)					\
+		HASH_PUT_BITS(					\
+			&device_data->base->str,		\
+			(u32) (val), HASH_STR_NBLW_POS,		\
+			HASH_STR_NBLW_MASK)
+#define HASH_SET_DCAL					\
+		HASH_PUT_BITS(				\
+			&device_data->base->str,	\
+			0x01, HASH_STR_DCAL_POS,	\
+			HASH_STR_DCAL_MASK)
+
+/* Hardware access method */
+enum hash_mode {
+	HASH_MODE_CPU,
+	HASH_MODE_DMA
+};
+
+/**
+ * struct uint64 - Structure to handle 64 bits integers.
+ * @high_word:	Most significant bits.
+ * @low_word:	Least significant bits.
+ *
+ * Used to handle 64 bits integers.
+ */
+struct uint64 {
+	u32 high_word;
+	u32 low_word;
+};
+
+/**
+ * struct hash_register - Contains all registers in ux500 hash hardware.
+ * @cr:		HASH control register (0x000).
+ * @din:	HASH data input register (0x004).
+ * @str:	HASH start register (0x008).
+ * @hx:		HASH digest register 0..7 (0x00c-0x01C).
+ * @padding0:	Reserved (0x02C).
+ * @itcr:	Integration test control register (0x080).
+ * @itip:	Integration test input register (0x084).
+ * @itop:	Integration test output register (0x088).
+ * @padding1:	Reserved (0x08C).
+ * @csfull:	HASH context full register (0x0F8).
+ * @csdatain:	HASH context swap data input register (0x0FC).
+ * @csrx:	HASH context swap register 0..51 (0x100-0x1CC).
+ * @padding2:	Reserved (0x1D0).
+ * @periphid0:	HASH peripheral identification register 0 (0xFE0).
+ * @periphid1:	HASH peripheral identification register 1 (0xFE4).
+ * @periphid2:	HASH peripheral identification register 2 (0xFE8).
+ * @periphid3:	HASH peripheral identification register 3 (0xFEC).
+ * @cellid0:	HASH PCell identification register 0 (0xFF0).
+ * @cellid1:	HASH PCell identification register 1 (0xFF4).
+ * @cellid2:	HASH PCell identification register 2 (0xFF8).
+ * @cellid3:	HASH PCell identification register 3 (0xFFC).
+ *
+ * The device communicates to the HASH via 32-bit-wide control registers
+ * accessible via the 32-bit width AMBA rev. 2.0 AHB Bus. Below is a structure
+ * with the registers used.
+ */
+struct hash_register {
+	u32 cr;
+	u32 din;
+	u32 str;
+	u32 hx[8];
+
+	u32 padding0[(0x080 - 0x02C) / sizeof(u32)];
+
+	u32 itcr;
+	u32 itip;
+	u32 itop;
+
+	u32 padding1[(0x0F8 - 0x08C) / sizeof(u32)];
+
+	u32 csfull;
+	u32 csdatain;
+	u32 csrx[HASH_CSR_COUNT];
+
+	u32 padding2[(0xFE0 - 0x1D0) / sizeof(u32)];
+
+	u32 periphid0;
+	u32 periphid1;
+	u32 periphid2;
+	u32 periphid3;
+
+	u32 cellid0;
+	u32 cellid1;
+	u32 cellid2;
+	u32 cellid3;
+};
+
+/**
+ * struct hash_state - Hash context state.
+ * @temp_cr:	Temporary HASH Control Register.
+ * @str_reg:	HASH Start Register.
+ * @din_reg:	HASH Data Input Register.
+ * @csr[52]:	HASH Context Swap Registers 0-39.
+ * @csfull:	HASH Context Swap Registers 40 ie Status flags.
+ * @csdatain:	HASH Context Swap Registers 41 ie Input data.
+ * @buffer:	Working buffer for messages going to the hardware.
+ * @length:	Length of the part of message hashed so far (floor(N/64) * 64).
+ * @index:	Valid number of bytes in buffer (N % 64).
+ * @bit_index:	Valid number of bits in buffer (N % 8).
+ *
+ * This structure is used between context switches, i.e. when ongoing jobs are
+ * interupted with new jobs. When this happens we need to store intermediate
+ * results in software.
+ *
+ * WARNING: "index" is the  member of the structure, to be sure  that "buffer"
+ * is aligned on a 4-bytes boundary. This is highly implementation dependent
+ * and MUST be checked whenever this code is ported on new platforms.
+ */
+struct hash_state {
+	u32		temp_cr;
+	u32		str_reg;
+	u32		din_reg;
+	u32		csr[52];
+	u32		csfull;
+	u32		csdatain;
+	u32		buffer[HASH_BLOCK_SIZE / sizeof(u32)];
+	struct uint64	length;
+	u8		index;
+	u8		bit_index;
+};
+
+/**
+ * enum hash_device_id - HASH device ID.
+ * @HASH_DEVICE_ID_0: Hash hardware with ID 0
+ * @HASH_DEVICE_ID_1: Hash hardware with ID 1
+ */
+enum hash_device_id {
+	HASH_DEVICE_ID_0 = 0,
+	HASH_DEVICE_ID_1 = 1
+};
+
+/**
+ * enum hash_data_format - HASH data format.
+ * @HASH_DATA_32_BITS:	32 bits data format
+ * @HASH_DATA_16_BITS:	16 bits data format
+ * @HASH_DATA_8_BITS:	8 bits data format.
+ * @HASH_DATA_1_BITS:	1 bit data format.
+ */
+enum hash_data_format {
+	HASH_DATA_32_BITS	= 0x0,
+	HASH_DATA_16_BITS	= 0x1,
+	HASH_DATA_8_BITS	= 0x2,
+	HASH_DATA_1_BIT		= 0x3
+};
+
+/**
+ * enum hash_algo - Enumeration for selecting between SHA1 or SHA2 algorithm.
+ * @HASH_ALGO_SHA1: Indicates that SHA1 is used.
+ * @HASH_ALGO_SHA2: Indicates that SHA2 (SHA256) is used.
+ */
+enum hash_algo {
+	HASH_ALGO_SHA1		= 0x0,
+	HASH_ALGO_SHA256	= 0x1
+};
+
+/**
+ * enum hash_op - Enumeration for selecting between HASH or HMAC mode.
+ * @HASH_OPER_MODE_HASH: Indicates usage of normal HASH mode.
+ * @HASH_OPER_MODE_HMAC: Indicates usage of HMAC.
+ */
+enum hash_op {
+	HASH_OPER_MODE_HASH = 0x0,
+	HASH_OPER_MODE_HMAC = 0x1
+};
+
+/**
+ * struct hash_config - Configuration data for the hardware.
+ * @data_format:	Format of data entered into the hash data in register.
+ * @algorithm:		Algorithm selection bit.
+ * @oper_mode:		Operating mode selection bit.
+ */
+struct hash_config {
+	int data_format;
+	int algorithm;
+	int oper_mode;
+};
+
+/**
+ * struct hash_dma - Structure used for dma.
+ * @mask:		DMA capabilities bitmap mask.
+ * @complete:		Used to maintain state for a "completion".
+ * @chan_mem2hash:	DMA channel.
+ * @cfg_mem2hash:	DMA channel configuration.
+ * @sg_len:		Scatterlist length.
+ * @sg:			Scatterlist.
+ * @nents:		Number of sg entries.
+ */
+struct hash_dma {
+	dma_cap_mask_t		mask;
+	struct completion	complete;
+	struct dma_chan		*chan_mem2hash;
+	void			*cfg_mem2hash;
+	int			sg_len;
+	struct scatterlist	*sg;
+	int			nents;
+};
+
+/**
+ * struct hash_ctx - The context used for hash calculations.
+ * @key:	The key used in the operation.
+ * @keylen:	The length of the key.
+ * @state:	The state of the current calculations.
+ * @config:	The current configuration.
+ * @digestsize:	The size of current digest.
+ * @device:	Pointer to the device structure.
+ */
+struct hash_ctx {
+	u8			*key;
+	u32			keylen;
+	struct hash_config	config;
+	int			digestsize;
+	struct hash_device_data	*device;
+};
+
+/**
+ * struct hash_ctx - The request context used for hash calculations.
+ * @state:	The state of the current calculations.
+ * @dma_mode:	Used in special cases (workaround), e.g. need to change to
+ *		cpu mode, if not supported/working in dma mode.
+ * @updated:	Indicates if hardware is initialized for new operations.
+ */
+struct hash_req_ctx {
+	struct hash_state	state;
+	bool			dma_mode;
+	u8			updated;
+};
+
+/**
+ * struct hash_device_data - structure for a hash device.
+ * @base:		Pointer to virtual base address of the hash device.
+ * @phybase:		Pointer to physical memory location of the hash device.
+ * @list_node:		For inclusion in klist.
+ * @dev:		Pointer to the device dev structure.
+ * @ctx_lock:		Spinlock for current_ctx.
+ * @current_ctx:	Pointer to the currently allocated context.
+ * @power_state:	TRUE = power state on, FALSE = power state off.
+ * @power_state_lock:	Spinlock for power_state.
+ * @regulator:		Pointer to the device's power control.
+ * @clk:		Pointer to the device's clock control.
+ * @restore_dev_state:	TRUE = saved state, FALSE = no saved state.
+ * @dma:		Structure used for dma.
+ */
+struct hash_device_data {
+	struct hash_register __iomem	*base;
+	phys_addr_t             phybase;
+	struct klist_node	list_node;
+	struct device		*dev;
+	struct spinlock		ctx_lock;
+	struct hash_ctx		*current_ctx;
+	bool			power_state;
+	struct spinlock		power_state_lock;
+	struct regulator	*regulator;
+	struct clk		*clk;
+	bool			restore_dev_state;
+	struct hash_state	state; /* Used for saving and resuming state */
+	struct hash_dma		dma;
+};
+
+int hash_check_hw(struct hash_device_data *device_data);
+
+int hash_setconfiguration(struct hash_device_data *device_data,
+		struct hash_config *config);
+
+void hash_begin(struct hash_device_data *device_data, struct hash_ctx *ctx);
+
+void hash_get_digest(struct hash_device_data *device_data,
+		u8 *digest, int algorithm);
+
+int hash_hw_update(struct ahash_request *req);
+
+int hash_save_state(struct hash_device_data *device_data,
+		struct hash_state *state);
+
+int hash_resume_state(struct hash_device_data *device_data,
+		const struct hash_state *state);
+
+#endif
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
new file mode 100644
index 000000000..18ef5b8cc
--- /dev/null
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -0,0 +1,1965 @@
+/*
+ * Cryptographic API.
+ * Support for Nomadik hardware crypto engine.
+
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson
+ * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson
+ * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson.
+ * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson.
+ * Author: Andreas Westin <andreas.westin@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#define pr_fmt(fmt) "hashX hashX: " fmt
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/klist.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/crypto.h>
+
+#include <linux/regulator/consumer.h>
+#include <linux/dmaengine.h>
+#include <linux/bitops.h>
+
+#include <crypto/internal/hash.h>
+#include <crypto/sha.h>
+#include <crypto/scatterwalk.h>
+#include <crypto/algapi.h>
+
+#include <linux/platform_data/crypto-ux500.h>
+
+#include "hash_alg.h"
+
+static int hash_mode;
+module_param(hash_mode, int, 0);
+MODULE_PARM_DESC(hash_mode, "CPU or DMA mode. CPU = 0 (default), DMA = 1");
+
+/* HMAC-SHA1, no key */
+static const u8 zero_message_hmac_sha1[SHA1_DIGEST_SIZE] = {
+	0xfb, 0xdb, 0x1d, 0x1b, 0x18, 0xaa, 0x6c, 0x08,
+	0x32, 0x4b, 0x7d, 0x64, 0xb7, 0x1f, 0xb7, 0x63,
+	0x70, 0x69, 0x0e, 0x1d
+};
+
+/* HMAC-SHA256, no key */
+static const u8 zero_message_hmac_sha256[SHA256_DIGEST_SIZE] = {
+	0xb6, 0x13, 0x67, 0x9a, 0x08, 0x14, 0xd9, 0xec,
+	0x77, 0x2f, 0x95, 0xd7, 0x78, 0xc3, 0x5f, 0xc5,
+	0xff, 0x16, 0x97, 0xc4, 0x93, 0x71, 0x56, 0x53,
+	0xc6, 0xc7, 0x12, 0x14, 0x42, 0x92, 0xc5, 0xad
+};
+
+/**
+ * struct hash_driver_data - data specific to the driver.
+ *
+ * @device_list:	A list of registered devices to choose from.
+ * @device_allocation:	A semaphore initialized with number of devices.
+ */
+struct hash_driver_data {
+	struct klist		device_list;
+	struct semaphore	device_allocation;
+};
+
+static struct hash_driver_data	driver_data;
+
+/* Declaration of functions */
+/**
+ * hash_messagepad - Pads a message and write the nblw bits.
+ * @device_data:	Structure for the hash device.
+ * @message:		Last word of a message
+ * @index_bytes:	The number of bytes in the last message
+ *
+ * This function manages the final part of the digest calculation, when less
+ * than 512 bits (64 bytes) remain in message. This means index_bytes < 64.
+ *
+ */
+static void hash_messagepad(struct hash_device_data *device_data,
+			    const u32 *message, u8 index_bytes);
+
+/**
+ * release_hash_device - Releases a previously allocated hash device.
+ * @device_data:	Structure for the hash device.
+ *
+ */
+static void release_hash_device(struct hash_device_data *device_data)
+{
+	spin_lock(&device_data->ctx_lock);
+	device_data->current_ctx->device = NULL;
+	device_data->current_ctx = NULL;
+	spin_unlock(&device_data->ctx_lock);
+
+	/*
+	 * The down_interruptible part for this semaphore is called in
+	 * cryp_get_device_data.
+	 */
+	up(&driver_data.device_allocation);
+}
+
+static void hash_dma_setup_channel(struct hash_device_data *device_data,
+				   struct device *dev)
+{
+	struct hash_platform_data *platform_data = dev->platform_data;
+	struct dma_slave_config conf = {
+		.direction = DMA_MEM_TO_DEV,
+		.dst_addr = device_data->phybase + HASH_DMA_FIFO,
+		.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
+		.dst_maxburst = 16,
+	};
+
+	dma_cap_zero(device_data->dma.mask);
+	dma_cap_set(DMA_SLAVE, device_data->dma.mask);
+
+	device_data->dma.cfg_mem2hash = platform_data->mem_to_engine;
+	device_data->dma.chan_mem2hash =
+		dma_request_channel(device_data->dma.mask,
+				    platform_data->dma_filter,
+				    device_data->dma.cfg_mem2hash);
+
+	dmaengine_slave_config(device_data->dma.chan_mem2hash, &conf);
+
+	init_completion(&device_data->dma.complete);
+}
+
+static void hash_dma_callback(void *data)
+{
+	struct hash_ctx *ctx = data;
+
+	complete(&ctx->device->dma.complete);
+}
+
+static int hash_set_dma_transfer(struct hash_ctx *ctx, struct scatterlist *sg,
+				 int len, enum dma_data_direction direction)
+{
+	struct dma_async_tx_descriptor *desc = NULL;
+	struct dma_chan *channel = NULL;
+	dma_cookie_t cookie;
+
+	if (direction != DMA_TO_DEVICE) {
+		dev_err(ctx->device->dev, "%s: Invalid DMA direction\n",
+			__func__);
+		return -EFAULT;
+	}
+
+	sg->length = ALIGN(sg->length, HASH_DMA_ALIGN_SIZE);
+
+	channel = ctx->device->dma.chan_mem2hash;
+	ctx->device->dma.sg = sg;
+	ctx->device->dma.sg_len = dma_map_sg(channel->device->dev,
+			ctx->device->dma.sg, ctx->device->dma.nents,
+			direction);
+
+	if (!ctx->device->dma.sg_len) {
+		dev_err(ctx->device->dev, "%s: Could not map the sg list (TO_DEVICE)\n",
+			__func__);
+		return -EFAULT;
+	}
+
+	dev_dbg(ctx->device->dev, "%s: Setting up DMA for buffer (TO_DEVICE)\n",
+		__func__);
+	desc = dmaengine_prep_slave_sg(channel,
+			ctx->device->dma.sg, ctx->device->dma.sg_len,
+			DMA_MEM_TO_DEV, DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
+	if (!desc) {
+		dev_err(ctx->device->dev,
+			"%s: dmaengine_prep_slave_sg() failed!\n", __func__);
+		return -EFAULT;
+	}
+
+	desc->callback = hash_dma_callback;
+	desc->callback_param = ctx;
+
+	cookie = dmaengine_submit(desc);
+	dma_async_issue_pending(channel);
+
+	return 0;
+}
+
+static void hash_dma_done(struct hash_ctx *ctx)
+{
+	struct dma_chan *chan;
+
+	chan = ctx->device->dma.chan_mem2hash;
+	dmaengine_terminate_all(chan);
+	dma_unmap_sg(chan->device->dev, ctx->device->dma.sg,
+		     ctx->device->dma.sg_len, DMA_TO_DEVICE);
+}
+
+static int hash_dma_write(struct hash_ctx *ctx,
+			  struct scatterlist *sg, int len)
+{
+	int error = hash_set_dma_transfer(ctx, sg, len, DMA_TO_DEVICE);
+	if (error) {
+		dev_dbg(ctx->device->dev,
+			"%s: hash_set_dma_transfer() failed\n", __func__);
+		return error;
+	}
+
+	return len;
+}
+
+/**
+ * get_empty_message_digest - Returns a pre-calculated digest for
+ * the empty message.
+ * @device_data:	Structure for the hash device.
+ * @zero_hash:		Buffer to return the empty message digest.
+ * @zero_hash_size:	Hash size of the empty message digest.
+ * @zero_digest:	True if zero_digest returned.
+ */
+static int get_empty_message_digest(
+		struct hash_device_data *device_data,
+		u8 *zero_hash, u32 *zero_hash_size, bool *zero_digest)
+{
+	int ret = 0;
+	struct hash_ctx *ctx = device_data->current_ctx;
+	*zero_digest = false;
+
+	/**
+	 * Caller responsible for ctx != NULL.
+	 */
+
+	if (HASH_OPER_MODE_HASH == ctx->config.oper_mode) {
+		if (HASH_ALGO_SHA1 == ctx->config.algorithm) {
+			memcpy(zero_hash, &sha1_zero_message_hash[0],
+			       SHA1_DIGEST_SIZE);
+			*zero_hash_size = SHA1_DIGEST_SIZE;
+			*zero_digest = true;
+		} else if (HASH_ALGO_SHA256 ==
+				ctx->config.algorithm) {
+			memcpy(zero_hash, &sha256_zero_message_hash[0],
+			       SHA256_DIGEST_SIZE);
+			*zero_hash_size = SHA256_DIGEST_SIZE;
+			*zero_digest = true;
+		} else {
+			dev_err(device_data->dev, "%s: Incorrect algorithm!\n",
+				__func__);
+			ret = -EINVAL;
+			goto out;
+		}
+	} else if (HASH_OPER_MODE_HMAC == ctx->config.oper_mode) {
+		if (!ctx->keylen) {
+			if (HASH_ALGO_SHA1 == ctx->config.algorithm) {
+				memcpy(zero_hash, &zero_message_hmac_sha1[0],
+				       SHA1_DIGEST_SIZE);
+				*zero_hash_size = SHA1_DIGEST_SIZE;
+				*zero_digest = true;
+			} else if (HASH_ALGO_SHA256 == ctx->config.algorithm) {
+				memcpy(zero_hash, &zero_message_hmac_sha256[0],
+				       SHA256_DIGEST_SIZE);
+				*zero_hash_size = SHA256_DIGEST_SIZE;
+				*zero_digest = true;
+			} else {
+				dev_err(device_data->dev, "%s: Incorrect algorithm!\n",
+					__func__);
+				ret = -EINVAL;
+				goto out;
+			}
+		} else {
+			dev_dbg(device_data->dev,
+				"%s: Continue hash calculation, since hmac key available\n",
+				__func__);
+		}
+	}
+out:
+
+	return ret;
+}
+
+/**
+ * hash_disable_power - Request to disable power and clock.
+ * @device_data:	Structure for the hash device.
+ * @save_device_state:	If true, saves the current hw state.
+ *
+ * This function request for disabling power (regulator) and clock,
+ * and could also save current hw state.
+ */
+static int hash_disable_power(struct hash_device_data *device_data,
+			      bool save_device_state)
+{
+	int ret = 0;
+	struct device *dev = device_data->dev;
+
+	spin_lock(&device_data->power_state_lock);
+	if (!device_data->power_state)
+		goto out;
+
+	if (save_device_state) {
+		hash_save_state(device_data,
+				&device_data->state);
+		device_data->restore_dev_state = true;
+	}
+
+	clk_disable(device_data->clk);
+	ret = regulator_disable(device_data->regulator);
+	if (ret)
+		dev_err(dev, "%s: regulator_disable() failed!\n", __func__);
+
+	device_data->power_state = false;
+
+out:
+	spin_unlock(&device_data->power_state_lock);
+
+	return ret;
+}
+
+/**
+ * hash_enable_power - Request to enable power and clock.
+ * @device_data:		Structure for the hash device.
+ * @restore_device_state:	If true, restores a previous saved hw state.
+ *
+ * This function request for enabling power (regulator) and clock,
+ * and could also restore a previously saved hw state.
+ */
+static int hash_enable_power(struct hash_device_data *device_data,
+			     bool restore_device_state)
+{
+	int ret = 0;
+	struct device *dev = device_data->dev;
+
+	spin_lock(&device_data->power_state_lock);
+	if (!device_data->power_state) {
+		ret = regulator_enable(device_data->regulator);
+		if (ret) {
+			dev_err(dev, "%s: regulator_enable() failed!\n",
+				__func__);
+			goto out;
+		}
+		ret = clk_enable(device_data->clk);
+		if (ret) {
+			dev_err(dev, "%s: clk_enable() failed!\n", __func__);
+			ret = regulator_disable(
+					device_data->regulator);
+			goto out;
+		}
+		device_data->power_state = true;
+	}
+
+	if (device_data->restore_dev_state) {
+		if (restore_device_state) {
+			device_data->restore_dev_state = false;
+			hash_resume_state(device_data, &device_data->state);
+		}
+	}
+out:
+	spin_unlock(&device_data->power_state_lock);
+
+	return ret;
+}
+
+/**
+ * hash_get_device_data - Checks for an available hash device and return it.
+ * @hash_ctx:		Structure for the hash context.
+ * @device_data:	Structure for the hash device.
+ *
+ * This function check for an available hash device and return it to
+ * the caller.
+ * Note! Caller need to release the device, calling up().
+ */
+static int hash_get_device_data(struct hash_ctx *ctx,
+				struct hash_device_data **device_data)
+{
+	int			ret;
+	struct klist_iter	device_iterator;
+	struct klist_node	*device_node;
+	struct hash_device_data *local_device_data = NULL;
+
+	/* Wait until a device is available */
+	ret = down_interruptible(&driver_data.device_allocation);
+	if (ret)
+		return ret;  /* Interrupted */
+
+	/* Select a device */
+	klist_iter_init(&driver_data.device_list, &device_iterator);
+	device_node = klist_next(&device_iterator);
+	while (device_node) {
+		local_device_data = container_of(device_node,
+					   struct hash_device_data, list_node);
+		spin_lock(&local_device_data->ctx_lock);
+		/* current_ctx allocates a device, NULL = unallocated */
+		if (local_device_data->current_ctx) {
+			device_node = klist_next(&device_iterator);
+		} else {
+			local_device_data->current_ctx = ctx;
+			ctx->device = local_device_data;
+			spin_unlock(&local_device_data->ctx_lock);
+			break;
+		}
+		spin_unlock(&local_device_data->ctx_lock);
+	}
+	klist_iter_exit(&device_iterator);
+
+	if (!device_node) {
+		/**
+		 * No free device found.
+		 * Since we allocated a device with down_interruptible, this
+		 * should not be able to happen.
+		 * Number of available devices, which are contained in
+		 * device_allocation, is therefore decremented by not doing
+		 * an up(device_allocation).
+		 */
+		return -EBUSY;
+	}
+
+	*device_data = local_device_data;
+
+	return 0;
+}
+
+/**
+ * hash_hw_write_key - Writes the key to the hardware registries.
+ *
+ * @device_data:	Structure for the hash device.
+ * @key:		Key to be written.
+ * @keylen:		The lengt of the key.
+ *
+ * Note! This function DOES NOT write to the NBLW registry, even though
+ * specified in the the hw design spec. Either due to incorrect info in the
+ * spec or due to a bug in the hw.
+ */
+static void hash_hw_write_key(struct hash_device_data *device_data,
+			      const u8 *key, unsigned int keylen)
+{
+	u32 word = 0;
+	int nwords = 1;
+
+	HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);
+
+	while (keylen >= 4) {
+		u32 *key_word = (u32 *)key;
+
+		HASH_SET_DIN(key_word, nwords);
+		keylen -= 4;
+		key += 4;
+	}
+
+	/* Take care of the remaining bytes in the last word */
+	if (keylen) {
+		word = 0;
+		while (keylen) {
+			word |= (key[keylen - 1] << (8 * (keylen - 1)));
+			keylen--;
+		}
+
+		HASH_SET_DIN(&word, nwords);
+	}
+
+	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
+		cpu_relax();
+
+	HASH_SET_DCAL;
+
+	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
+		cpu_relax();
+}
+
+/**
+ * init_hash_hw - Initialise the hash hardware for a new calculation.
+ * @device_data:	Structure for the hash device.
+ * @ctx:		The hash context.
+ *
+ * This function will enable the bits needed to clear and start a new
+ * calculation.
+ */
+static int init_hash_hw(struct hash_device_data *device_data,
+			struct hash_ctx *ctx)
+{
+	int ret = 0;
+
+	ret = hash_setconfiguration(device_data, &ctx->config);
+	if (ret) {
+		dev_err(device_data->dev, "%s: hash_setconfiguration() failed!\n",
+			__func__);
+		return ret;
+	}
+
+	hash_begin(device_data, ctx);
+
+	if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC)
+		hash_hw_write_key(device_data, ctx->key, ctx->keylen);
+
+	return ret;
+}
+
+/**
+ * hash_get_nents - Return number of entries (nents) in scatterlist (sg).
+ *
+ * @sg:		Scatterlist.
+ * @size:	Size in bytes.
+ * @aligned:	True if sg data aligned to work in DMA mode.
+ *
+ */
+static int hash_get_nents(struct scatterlist *sg, int size, bool *aligned)
+{
+	int nents = 0;
+	bool aligned_data = true;
+
+	while (size > 0 && sg) {
+		nents++;
+		size -= sg->length;
+
+		/* hash_set_dma_transfer will align last nent */
+		if ((aligned && !IS_ALIGNED(sg->offset, HASH_DMA_ALIGN_SIZE)) ||
+		    (!IS_ALIGNED(sg->length, HASH_DMA_ALIGN_SIZE) && size > 0))
+			aligned_data = false;
+
+		sg = sg_next(sg);
+	}
+
+	if (aligned)
+		*aligned = aligned_data;
+
+	if (size != 0)
+		return -EFAULT;
+
+	return nents;
+}
+
+/**
+ * hash_dma_valid_data - checks for dma valid sg data.
+ * @sg:		Scatterlist.
+ * @datasize:	Datasize in bytes.
+ *
+ * NOTE! This function checks for dma valid sg data, since dma
+ * only accept datasizes of even wordsize.
+ */
+static bool hash_dma_valid_data(struct scatterlist *sg, int datasize)
+{
+	bool aligned;
+
+	/* Need to include at least one nent, else error */
+	if (hash_get_nents(sg, datasize, &aligned) < 1)
+		return false;
+
+	return aligned;
+}
+
+/**
+ * hash_init - Common hash init function for SHA1/SHA2 (SHA256).
+ * @req: The hash request for the job.
+ *
+ * Initialize structures.
+ */
+static int hash_init(struct ahash_request *req)
+{
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
+	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
+
+	if (!ctx->key)
+		ctx->keylen = 0;
+
+	memset(&req_ctx->state, 0, sizeof(struct hash_state));
+	req_ctx->updated = 0;
+	if (hash_mode == HASH_MODE_DMA) {
+		if (req->nbytes < HASH_DMA_ALIGN_SIZE) {
+			req_ctx->dma_mode = false; /* Don't use DMA */
+
+			pr_debug("%s: DMA mode, but direct to CPU mode for data size < %d\n",
+				 __func__, HASH_DMA_ALIGN_SIZE);
+		} else {
+			if (req->nbytes >= HASH_DMA_PERFORMANCE_MIN_SIZE &&
+			    hash_dma_valid_data(req->src, req->nbytes)) {
+				req_ctx->dma_mode = true;
+			} else {
+				req_ctx->dma_mode = false;
+				pr_debug("%s: DMA mode, but use CPU mode for datalength < %d or non-aligned data, except in last nent\n",
+					 __func__,
+					 HASH_DMA_PERFORMANCE_MIN_SIZE);
+			}
+		}
+	}
+	return 0;
+}
+
+/**
+ * hash_processblock - This function processes a single block of 512 bits (64
+ *                     bytes), word aligned, starting at message.
+ * @device_data:	Structure for the hash device.
+ * @message:		Block (512 bits) of message to be written to
+ *			the HASH hardware.
+ *
+ */
+static void hash_processblock(struct hash_device_data *device_data,
+			      const u32 *message, int length)
+{
+	int len = length / HASH_BYTES_PER_WORD;
+	/*
+	 * NBLW bits. Reset the number of bits in last word (NBLW).
+	 */
+	HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);
+
+	/*
+	 * Write message data to the HASH_DIN register.
+	 */
+	HASH_SET_DIN(message, len);
+}
+
+/**
+ * hash_messagepad - Pads a message and write the nblw bits.
+ * @device_data:	Structure for the hash device.
+ * @message:		Last word of a message.
+ * @index_bytes:	The number of bytes in the last message.
+ *
+ * This function manages the final part of the digest calculation, when less
+ * than 512 bits (64 bytes) remain in message. This means index_bytes < 64.
+ *
+ */
+static void hash_messagepad(struct hash_device_data *device_data,
+			    const u32 *message, u8 index_bytes)
+{
+	int nwords = 1;
+
+	/*
+	 * Clear hash str register, only clear NBLW
+	 * since DCAL will be reset by hardware.
+	 */
+	HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);
+
+	/* Main loop */
+	while (index_bytes >= 4) {
+		HASH_SET_DIN(message, nwords);
+		index_bytes -= 4;
+		message++;
+	}
+
+	if (index_bytes)
+		HASH_SET_DIN(message, nwords);
+
+	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
+		cpu_relax();
+
+	/* num_of_bytes == 0 => NBLW <- 0 (32 bits valid in DATAIN) */
+	HASH_SET_NBLW(index_bytes * 8);
+	dev_dbg(device_data->dev, "%s: DIN=0x%08x NBLW=%lu\n",
+		__func__, readl_relaxed(&device_data->base->din),
+		readl_relaxed(&device_data->base->str) & HASH_STR_NBLW_MASK);
+	HASH_SET_DCAL;
+	dev_dbg(device_data->dev, "%s: after dcal -> DIN=0x%08x NBLW=%lu\n",
+		__func__, readl_relaxed(&device_data->base->din),
+		readl_relaxed(&device_data->base->str) & HASH_STR_NBLW_MASK);
+
+	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
+		cpu_relax();
+}
+
+/**
+ * hash_incrementlength - Increments the length of the current message.
+ * @ctx: Hash context
+ * @incr: Length of message processed already
+ *
+ * Overflow cannot occur, because conditions for overflow are checked in
+ * hash_hw_update.
+ */
+static void hash_incrementlength(struct hash_req_ctx *ctx, u32 incr)
+{
+	ctx->state.length.low_word += incr;
+
+	/* Check for wrap-around */
+	if (ctx->state.length.low_word < incr)
+		ctx->state.length.high_word++;
+}
+
+/**
+ * hash_setconfiguration - Sets the required configuration for the hash
+ *                         hardware.
+ * @device_data:	Structure for the hash device.
+ * @config:		Pointer to a configuration structure.
+ */
+int hash_setconfiguration(struct hash_device_data *device_data,
+			  struct hash_config *config)
+{
+	int ret = 0;
+
+	if (config->algorithm != HASH_ALGO_SHA1 &&
+	    config->algorithm != HASH_ALGO_SHA256)
+		return -EPERM;
+
+	/*
+	 * DATAFORM bits. Set the DATAFORM bits to 0b11, which means the data
+	 * to be written to HASH_DIN is considered as 32 bits.
+	 */
+	HASH_SET_DATA_FORMAT(config->data_format);
+
+	/*
+	 * ALGO bit. Set to 0b1 for SHA-1 and 0b0 for SHA-256
+	 */
+	switch (config->algorithm) {
+	case HASH_ALGO_SHA1:
+		HASH_SET_BITS(&device_data->base->cr, HASH_CR_ALGO_MASK);
+		break;
+
+	case HASH_ALGO_SHA256:
+		HASH_CLEAR_BITS(&device_data->base->cr, HASH_CR_ALGO_MASK);
+		break;
+
+	default:
+		dev_err(device_data->dev, "%s: Incorrect algorithm\n",
+			__func__);
+		return -EPERM;
+	}
+
+	/*
+	 * MODE bit. This bit selects between HASH or HMAC mode for the
+	 * selected algorithm. 0b0 = HASH and 0b1 = HMAC.
+	 */
+	if (HASH_OPER_MODE_HASH == config->oper_mode)
+		HASH_CLEAR_BITS(&device_data->base->cr,
+				HASH_CR_MODE_MASK);
+	else if (HASH_OPER_MODE_HMAC == config->oper_mode) {
+		HASH_SET_BITS(&device_data->base->cr, HASH_CR_MODE_MASK);
+		if (device_data->current_ctx->keylen > HASH_BLOCK_SIZE) {
+			/* Truncate key to blocksize */
+			dev_dbg(device_data->dev, "%s: LKEY set\n", __func__);
+			HASH_SET_BITS(&device_data->base->cr,
+				      HASH_CR_LKEY_MASK);
+		} else {
+			dev_dbg(device_data->dev, "%s: LKEY cleared\n",
+				__func__);
+			HASH_CLEAR_BITS(&device_data->base->cr,
+					HASH_CR_LKEY_MASK);
+		}
+	} else {	/* Wrong hash mode */
+		ret = -EPERM;
+		dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n",
+			__func__);
+	}
+	return ret;
+}
+
+/**
+ * hash_begin - This routine resets some globals and initializes the hash
+ *              hardware.
+ * @device_data:	Structure for the hash device.
+ * @ctx:		Hash context.
+ */
+void hash_begin(struct hash_device_data *device_data, struct hash_ctx *ctx)
+{
+	/* HW and SW initializations */
+	/* Note: there is no need to initialize buffer and digest members */
+
+	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
+		cpu_relax();
+
+	/*
+	 * INIT bit. Set this bit to 0b1 to reset the HASH processor core and
+	 * prepare the initialize the HASH accelerator to compute the message
+	 * digest of a new message.
+	 */
+	HASH_INITIALIZE;
+
+	/*
+	 * NBLW bits. Reset the number of bits in last word (NBLW).
+	 */
+	HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);
+}
+
+static int hash_process_data(struct hash_device_data *device_data,
+			     struct hash_ctx *ctx, struct hash_req_ctx *req_ctx,
+			     int msg_length, u8 *data_buffer, u8 *buffer,
+			     u8 *index)
+{
+	int ret = 0;
+	u32 count;
+
+	do {
+		if ((*index + msg_length) < HASH_BLOCK_SIZE) {
+			for (count = 0; count < msg_length; count++) {
+				buffer[*index + count] =
+					*(data_buffer + count);
+			}
+			*index += msg_length;
+			msg_length = 0;
+		} else {
+			if (req_ctx->updated) {
+				ret = hash_resume_state(device_data,
+						&device_data->state);
+				memmove(req_ctx->state.buffer,
+					device_data->state.buffer,
+					HASH_BLOCK_SIZE);
+				if (ret) {
+					dev_err(device_data->dev,
+						"%s: hash_resume_state() failed!\n",
+						__func__);
+					goto out;
+				}
+			} else {
+				ret = init_hash_hw(device_data, ctx);
+				if (ret) {
+					dev_err(device_data->dev,
+						"%s: init_hash_hw() failed!\n",
+						__func__);
+					goto out;
+				}
+				req_ctx->updated = 1;
+			}
+			/*
+			 * If 'data_buffer' is four byte aligned and
+			 * local buffer does not have any data, we can
+			 * write data directly from 'data_buffer' to
+			 * HW peripheral, otherwise we first copy data
+			 * to a local buffer
+			 */
+			if ((0 == (((u32)data_buffer) % 4)) &&
+			    (0 == *index))
+				hash_processblock(device_data,
+						  (const u32 *)data_buffer,
+						  HASH_BLOCK_SIZE);
+			else {
+				for (count = 0;
+				     count < (u32)(HASH_BLOCK_SIZE - *index);
+				     count++) {
+					buffer[*index + count] =
+						*(data_buffer + count);
+				}
+				hash_processblock(device_data,
+						  (const u32 *)buffer,
+						  HASH_BLOCK_SIZE);
+			}
+			hash_incrementlength(req_ctx, HASH_BLOCK_SIZE);
+			data_buffer += (HASH_BLOCK_SIZE - *index);
+
+			msg_length -= (HASH_BLOCK_SIZE - *index);
+			*index = 0;
+
+			ret = hash_save_state(device_data,
+					&device_data->state);
+
+			memmove(device_data->state.buffer,
+				req_ctx->state.buffer,
+				HASH_BLOCK_SIZE);
+			if (ret) {
+				dev_err(device_data->dev, "%s: hash_save_state() failed!\n",
+					__func__);
+				goto out;
+			}
+		}
+	} while (msg_length != 0);
+out:
+
+	return ret;
+}
+
+/**
+ * hash_dma_final - The hash dma final function for SHA1/SHA256.
+ * @req:	The hash request for the job.
+ */
+static int hash_dma_final(struct ahash_request *req)
+{
+	int ret = 0;
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
+	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
+	struct hash_device_data *device_data;
+	u8 digest[SHA256_DIGEST_SIZE];
+	int bytes_written = 0;
+
+	ret = hash_get_device_data(ctx, &device_data);
+	if (ret)
+		return ret;
+
+	dev_dbg(device_data->dev, "%s: (ctx=0x%x)!\n", __func__, (u32) ctx);
+
+	if (req_ctx->updated) {
+		ret = hash_resume_state(device_data, &device_data->state);
+
+		if (ret) {
+			dev_err(device_data->dev, "%s: hash_resume_state() failed!\n",
+				__func__);
+			goto out;
+		}
+	}
+
+	if (!req_ctx->updated) {
+		ret = hash_setconfiguration(device_data, &ctx->config);
+		if (ret) {
+			dev_err(device_data->dev,
+				"%s: hash_setconfiguration() failed!\n",
+				__func__);
+			goto out;
+		}
+
+		/* Enable DMA input */
+		if (hash_mode != HASH_MODE_DMA || !req_ctx->dma_mode) {
+			HASH_CLEAR_BITS(&device_data->base->cr,
+					HASH_CR_DMAE_MASK);
+		} else {
+			HASH_SET_BITS(&device_data->base->cr,
+				      HASH_CR_DMAE_MASK);
+			HASH_SET_BITS(&device_data->base->cr,
+				      HASH_CR_PRIVN_MASK);
+		}
+
+		HASH_INITIALIZE;
+
+		if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC)
+			hash_hw_write_key(device_data, ctx->key, ctx->keylen);
+
+		/* Number of bits in last word = (nbytes * 8) % 32 */
+		HASH_SET_NBLW((req->nbytes * 8) % 32);
+		req_ctx->updated = 1;
+	}
+
+	/* Store the nents in the dma struct. */
+	ctx->device->dma.nents = hash_get_nents(req->src, req->nbytes, NULL);
+	if (!ctx->device->dma.nents) {
+		dev_err(device_data->dev, "%s: ctx->device->dma.nents = 0\n",
+			__func__);
+		ret = ctx->device->dma.nents;
+		goto out;
+	}
+
+	bytes_written = hash_dma_write(ctx, req->src, req->nbytes);
+	if (bytes_written != req->nbytes) {
+		dev_err(device_data->dev, "%s: hash_dma_write() failed!\n",
+			__func__);
+		ret = bytes_written;
+		goto out;
+	}
+
+	wait_for_completion(&ctx->device->dma.complete);
+	hash_dma_done(ctx);
+
+	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
+		cpu_relax();
+
+	if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC && ctx->key) {
+		unsigned int keylen = ctx->keylen;
+		u8 *key = ctx->key;
+
+		dev_dbg(device_data->dev, "%s: keylen: %d\n",
+			__func__, ctx->keylen);
+		hash_hw_write_key(device_data, key, keylen);
+	}
+
+	hash_get_digest(device_data, digest, ctx->config.algorithm);
+	memcpy(req->result, digest, ctx->digestsize);
+
+out:
+	release_hash_device(device_data);
+
+	/**
+	 * Allocated in setkey, and only used in HMAC.
+	 */
+	kfree(ctx->key);
+
+	return ret;
+}
+
+/**
+ * hash_hw_final - The final hash calculation function
+ * @req:	The hash request for the job.
+ */
+static int hash_hw_final(struct ahash_request *req)
+{
+	int ret = 0;
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
+	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
+	struct hash_device_data *device_data;
+	u8 digest[SHA256_DIGEST_SIZE];
+
+	ret = hash_get_device_data(ctx, &device_data);
+	if (ret)
+		return ret;
+
+	dev_dbg(device_data->dev, "%s: (ctx=0x%x)!\n", __func__, (u32) ctx);
+
+	if (req_ctx->updated) {
+		ret = hash_resume_state(device_data, &device_data->state);
+
+		if (ret) {
+			dev_err(device_data->dev,
+				"%s: hash_resume_state() failed!\n", __func__);
+			goto out;
+		}
+	} else if (req->nbytes == 0 && ctx->keylen == 0) {
+		u8 zero_hash[SHA256_DIGEST_SIZE];
+		u32 zero_hash_size = 0;
+		bool zero_digest = false;
+		/**
+		 * Use a pre-calculated empty message digest
+		 * (workaround since hw return zeroes, hw bug!?)
+		 */
+		ret = get_empty_message_digest(device_data, &zero_hash[0],
+				&zero_hash_size, &zero_digest);
+		if (!ret && likely(zero_hash_size == ctx->digestsize) &&
+		    zero_digest) {
+			memcpy(req->result, &zero_hash[0], ctx->digestsize);
+			goto out;
+		} else if (!ret && !zero_digest) {
+			dev_dbg(device_data->dev,
+				"%s: HMAC zero msg with key, continue...\n",
+				__func__);
+		} else {
+			dev_err(device_data->dev,
+				"%s: ret=%d, or wrong digest size? %s\n",
+				__func__, ret,
+				zero_hash_size == ctx->digestsize ?
+				"true" : "false");
+			/* Return error */
+			goto out;
+		}
+	} else if (req->nbytes == 0 && ctx->keylen > 0) {
+		ret = -EPERM;
+		dev_err(device_data->dev, "%s: Empty message with keylength > 0, NOT supported\n",
+			__func__);
+		goto out;
+	}
+
+	if (!req_ctx->updated) {
+		ret = init_hash_hw(device_data, ctx);
+		if (ret) {
+			dev_err(device_data->dev,
+				"%s: init_hash_hw() failed!\n", __func__);
+			goto out;
+		}
+	}
+
+	if (req_ctx->state.index) {
+		hash_messagepad(device_data, req_ctx->state.buffer,
+				req_ctx->state.index);
+	} else {
+		HASH_SET_DCAL;
+		while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
+			cpu_relax();
+	}
+
+	if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC && ctx->key) {
+		unsigned int keylen = ctx->keylen;
+		u8 *key = ctx->key;
+
+		dev_dbg(device_data->dev, "%s: keylen: %d\n",
+			__func__, ctx->keylen);
+		hash_hw_write_key(device_data, key, keylen);
+	}
+
+	hash_get_digest(device_data, digest, ctx->config.algorithm);
+	memcpy(req->result, digest, ctx->digestsize);
+
+out:
+	release_hash_device(device_data);
+
+	/**
+	 * Allocated in setkey, and only used in HMAC.
+	 */
+	kfree(ctx->key);
+
+	return ret;
+}
+
+/**
+ * hash_hw_update - Updates current HASH computation hashing another part of
+ *                  the message.
+ * @req:	Byte array containing the message to be hashed (caller
+ *		allocated).
+ */
+int hash_hw_update(struct ahash_request *req)
+{
+	int ret = 0;
+	u8 index = 0;
+	u8 *buffer;
+	struct hash_device_data *device_data;
+	u8 *data_buffer;
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
+	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
+	struct crypto_hash_walk walk;
+	int msg_length = crypto_hash_walk_first(req, &walk);
+
+	/* Empty message ("") is correct indata */
+	if (msg_length == 0)
+		return ret;
+
+	index = req_ctx->state.index;
+	buffer = (u8 *)req_ctx->state.buffer;
+
+	/* Check if ctx->state.length + msg_length
+	   overflows */
+	if (msg_length > (req_ctx->state.length.low_word + msg_length) &&
+	    HASH_HIGH_WORD_MAX_VAL == req_ctx->state.length.high_word) {
+		pr_err("%s: HASH_MSG_LENGTH_OVERFLOW!\n", __func__);
+		return -EPERM;
+	}
+
+	ret = hash_get_device_data(ctx, &device_data);
+	if (ret)
+		return ret;
+
+	/* Main loop */
+	while (0 != msg_length) {
+		data_buffer = walk.data;
+		ret = hash_process_data(device_data, ctx, req_ctx, msg_length,
+				data_buffer, buffer, &index);
+
+		if (ret) {
+			dev_err(device_data->dev, "%s: hash_internal_hw_update() failed!\n",
+				__func__);
+			goto out;
+		}
+
+		msg_length = crypto_hash_walk_done(&walk, 0);
+	}
+
+	req_ctx->state.index = index;
+	dev_dbg(device_data->dev, "%s: indata length=%d, bin=%d\n",
+		__func__, req_ctx->state.index, req_ctx->state.bit_index);
+
+out:
+	release_hash_device(device_data);
+
+	return ret;
+}
+
+/**
+ * hash_resume_state - Function that resumes the state of an calculation.
+ * @device_data:	Pointer to the device structure.
+ * @device_state:	The state to be restored in the hash hardware
+ */
+int hash_resume_state(struct hash_device_data *device_data,
+		      const struct hash_state *device_state)
+{
+	u32 temp_cr;
+	s32 count;
+	int hash_mode = HASH_OPER_MODE_HASH;
+
+	if (NULL == device_state) {
+		dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n",
+			__func__);
+		return -EPERM;
+	}
+
+	/* Check correctness of index and length members */
+	if (device_state->index > HASH_BLOCK_SIZE ||
+	    (device_state->length.low_word % HASH_BLOCK_SIZE) != 0) {
+		dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n",
+			__func__);
+		return -EPERM;
+	}
+
+	/*
+	 * INIT bit. Set this bit to 0b1 to reset the HASH processor core and
+	 * prepare the initialize the HASH accelerator to compute the message
+	 * digest of a new message.
+	 */
+	HASH_INITIALIZE;
+
+	temp_cr = device_state->temp_cr;
+	writel_relaxed(temp_cr & HASH_CR_RESUME_MASK, &device_data->base->cr);
+
+	if (readl(&device_data->base->cr) & HASH_CR_MODE_MASK)
+		hash_mode = HASH_OPER_MODE_HMAC;
+	else
+		hash_mode = HASH_OPER_MODE_HASH;
+
+	for (count = 0; count < HASH_CSR_COUNT; count++) {
+		if ((count >= 36) && (hash_mode == HASH_OPER_MODE_HASH))
+			break;
+
+		writel_relaxed(device_state->csr[count],
+			       &device_data->base->csrx[count]);
+	}
+
+	writel_relaxed(device_state->csfull, &device_data->base->csfull);
+	writel_relaxed(device_state->csdatain, &device_data->base->csdatain);
+
+	writel_relaxed(device_state->str_reg, &device_data->base->str);
+	writel_relaxed(temp_cr, &device_data->base->cr);
+
+	return 0;
+}
+
+/**
+ * hash_save_state - Function that saves the state of hardware.
+ * @device_data:	Pointer to the device structure.
+ * @device_state:	The strucure where the hardware state should be saved.
+ */
+int hash_save_state(struct hash_device_data *device_data,
+		    struct hash_state *device_state)
+{
+	u32 temp_cr;
+	u32 count;
+	int hash_mode = HASH_OPER_MODE_HASH;
+
+	if (NULL == device_state) {
+		dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n",
+			__func__);
+		return -ENOTSUPP;
+	}
+
+	/* Write dummy value to force digest intermediate calculation. This
+	 * actually makes sure that there isn't any ongoing calculation in the
+	 * hardware.
+	 */
+	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
+		cpu_relax();
+
+	temp_cr = readl_relaxed(&device_data->base->cr);
+
+	device_state->str_reg = readl_relaxed(&device_data->base->str);
+
+	device_state->din_reg = readl_relaxed(&device_data->base->din);
+
+	if (readl(&device_data->base->cr) & HASH_CR_MODE_MASK)
+		hash_mode = HASH_OPER_MODE_HMAC;
+	else
+		hash_mode = HASH_OPER_MODE_HASH;
+
+	for (count = 0; count < HASH_CSR_COUNT; count++) {
+		if ((count >= 36) && (hash_mode == HASH_OPER_MODE_HASH))
+			break;
+
+		device_state->csr[count] =
+			readl_relaxed(&device_data->base->csrx[count]);
+	}
+
+	device_state->csfull = readl_relaxed(&device_data->base->csfull);
+	device_state->csdatain = readl_relaxed(&device_data->base->csdatain);
+
+	device_state->temp_cr = temp_cr;
+
+	return 0;
+}
+
+/**
+ * hash_check_hw - This routine checks for peripheral Ids and PCell Ids.
+ * @device_data:
+ *
+ */
+int hash_check_hw(struct hash_device_data *device_data)
+{
+	/* Checking Peripheral Ids  */
+	if (HASH_P_ID0 == readl_relaxed(&device_data->base->periphid0) &&
+	    HASH_P_ID1 == readl_relaxed(&device_data->base->periphid1) &&
+	    HASH_P_ID2 == readl_relaxed(&device_data->base->periphid2) &&
+	    HASH_P_ID3 == readl_relaxed(&device_data->base->periphid3) &&
+	    HASH_CELL_ID0 == readl_relaxed(&device_data->base->cellid0) &&
+	    HASH_CELL_ID1 == readl_relaxed(&device_data->base->cellid1) &&
+	    HASH_CELL_ID2 == readl_relaxed(&device_data->base->cellid2) &&
+	    HASH_CELL_ID3 == readl_relaxed(&device_data->base->cellid3)) {
+		return 0;
+	}
+
+	dev_err(device_data->dev, "%s: HASH_UNSUPPORTED_HW!\n", __func__);
+	return -ENOTSUPP;
+}
+
+/**
+ * hash_get_digest - Gets the digest.
+ * @device_data:	Pointer to the device structure.
+ * @digest:		User allocated byte array for the calculated digest.
+ * @algorithm:		The algorithm in use.
+ */
+void hash_get_digest(struct hash_device_data *device_data,
+		     u8 *digest, int algorithm)
+{
+	u32 temp_hx_val, count;
+	int loop_ctr;
+
+	if (algorithm != HASH_ALGO_SHA1 && algorithm != HASH_ALGO_SHA256) {
+		dev_err(device_data->dev, "%s: Incorrect algorithm %d\n",
+			__func__, algorithm);
+		return;
+	}
+
+	if (algorithm == HASH_ALGO_SHA1)
+		loop_ctr = SHA1_DIGEST_SIZE / sizeof(u32);
+	else
+		loop_ctr = SHA256_DIGEST_SIZE / sizeof(u32);
+
+	dev_dbg(device_data->dev, "%s: digest array:(0x%x)\n",
+		__func__, (u32) digest);
+
+	/* Copy result into digest array */
+	for (count = 0; count < loop_ctr; count++) {
+		temp_hx_val = readl_relaxed(&device_data->base->hx[count]);
+		digest[count * 4] = (u8) ((temp_hx_val >> 24) & 0xFF);
+		digest[count * 4 + 1] = (u8) ((temp_hx_val >> 16) & 0xFF);
+		digest[count * 4 + 2] = (u8) ((temp_hx_val >> 8) & 0xFF);
+		digest[count * 4 + 3] = (u8) ((temp_hx_val >> 0) & 0xFF);
+	}
+}
+
+/**
+ * hash_update - The hash update function for SHA1/SHA2 (SHA256).
+ * @req: The hash request for the job.
+ */
+static int ahash_update(struct ahash_request *req)
+{
+	int ret = 0;
+	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
+
+	if (hash_mode != HASH_MODE_DMA || !req_ctx->dma_mode)
+		ret = hash_hw_update(req);
+	/* Skip update for DMA, all data will be passed to DMA in final */
+
+	if (ret) {
+		pr_err("%s: hash_hw_update() failed!\n", __func__);
+	}
+
+	return ret;
+}
+
+/**
+ * hash_final - The hash final function for SHA1/SHA2 (SHA256).
+ * @req:	The hash request for the job.
+ */
+static int ahash_final(struct ahash_request *req)
+{
+	int ret = 0;
+	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
+
+	pr_debug("%s: data size: %d\n", __func__, req->nbytes);
+
+	if ((hash_mode == HASH_MODE_DMA) && req_ctx->dma_mode)
+		ret = hash_dma_final(req);
+	else
+		ret = hash_hw_final(req);
+
+	if (ret) {
+		pr_err("%s: hash_hw/dma_final() failed\n", __func__);
+	}
+
+	return ret;
+}
+
+static int hash_setkey(struct crypto_ahash *tfm,
+		       const u8 *key, unsigned int keylen, int alg)
+{
+	int ret = 0;
+	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
+
+	/**
+	 * Freed in final.
+	 */
+	ctx->key = kmemdup(key, keylen, GFP_KERNEL);
+	if (!ctx->key) {
+		pr_err("%s: Failed to allocate ctx->key for %d\n",
+		       __func__, alg);
+		return -ENOMEM;
+	}
+	ctx->keylen = keylen;
+
+	return ret;
+}
+
+static int ahash_sha1_init(struct ahash_request *req)
+{
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
+
+	ctx->config.data_format = HASH_DATA_8_BITS;
+	ctx->config.algorithm = HASH_ALGO_SHA1;
+	ctx->config.oper_mode = HASH_OPER_MODE_HASH;
+	ctx->digestsize = SHA1_DIGEST_SIZE;
+
+	return hash_init(req);
+}
+
+static int ahash_sha256_init(struct ahash_request *req)
+{
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
+
+	ctx->config.data_format = HASH_DATA_8_BITS;
+	ctx->config.algorithm = HASH_ALGO_SHA256;
+	ctx->config.oper_mode = HASH_OPER_MODE_HASH;
+	ctx->digestsize = SHA256_DIGEST_SIZE;
+
+	return hash_init(req);
+}
+
+static int ahash_sha1_digest(struct ahash_request *req)
+{
+	int ret2, ret1;
+
+	ret1 = ahash_sha1_init(req);
+	if (ret1)
+		goto out;
+
+	ret1 = ahash_update(req);
+	ret2 = ahash_final(req);
+
+out:
+	return ret1 ? ret1 : ret2;
+}
+
+static int ahash_sha256_digest(struct ahash_request *req)
+{
+	int ret2, ret1;
+
+	ret1 = ahash_sha256_init(req);
+	if (ret1)
+		goto out;
+
+	ret1 = ahash_update(req);
+	ret2 = ahash_final(req);
+
+out:
+	return ret1 ? ret1 : ret2;
+}
+
+static int ahash_noimport(struct ahash_request *req, const void *in)
+{
+	return -ENOSYS;
+}
+
+static int ahash_noexport(struct ahash_request *req, void *out)
+{
+	return -ENOSYS;
+}
+
+static int hmac_sha1_init(struct ahash_request *req)
+{
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
+
+	ctx->config.data_format	= HASH_DATA_8_BITS;
+	ctx->config.algorithm	= HASH_ALGO_SHA1;
+	ctx->config.oper_mode	= HASH_OPER_MODE_HMAC;
+	ctx->digestsize		= SHA1_DIGEST_SIZE;
+
+	return hash_init(req);
+}
+
+static int hmac_sha256_init(struct ahash_request *req)
+{
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
+
+	ctx->config.data_format	= HASH_DATA_8_BITS;
+	ctx->config.algorithm	= HASH_ALGO_SHA256;
+	ctx->config.oper_mode	= HASH_OPER_MODE_HMAC;
+	ctx->digestsize		= SHA256_DIGEST_SIZE;
+
+	return hash_init(req);
+}
+
+static int hmac_sha1_digest(struct ahash_request *req)
+{
+	int ret2, ret1;
+
+	ret1 = hmac_sha1_init(req);
+	if (ret1)
+		goto out;
+
+	ret1 = ahash_update(req);
+	ret2 = ahash_final(req);
+
+out:
+	return ret1 ? ret1 : ret2;
+}
+
+static int hmac_sha256_digest(struct ahash_request *req)
+{
+	int ret2, ret1;
+
+	ret1 = hmac_sha256_init(req);
+	if (ret1)
+		goto out;
+
+	ret1 = ahash_update(req);
+	ret2 = ahash_final(req);
+
+out:
+	return ret1 ? ret1 : ret2;
+}
+
+static int hmac_sha1_setkey(struct crypto_ahash *tfm,
+			    const u8 *key, unsigned int keylen)
+{
+	return hash_setkey(tfm, key, keylen, HASH_ALGO_SHA1);
+}
+
+static int hmac_sha256_setkey(struct crypto_ahash *tfm,
+			      const u8 *key, unsigned int keylen)
+{
+	return hash_setkey(tfm, key, keylen, HASH_ALGO_SHA256);
+}
+
+struct hash_algo_template {
+	struct hash_config conf;
+	struct ahash_alg hash;
+};
+
+static int hash_cra_init(struct crypto_tfm *tfm)
+{
+	struct hash_ctx *ctx = crypto_tfm_ctx(tfm);
+	struct crypto_alg *alg = tfm->__crt_alg;
+	struct hash_algo_template *hash_alg;
+
+	hash_alg = container_of(__crypto_ahash_alg(alg),
+			struct hash_algo_template,
+			hash);
+
+	crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
+				 sizeof(struct hash_req_ctx));
+
+	ctx->config.data_format = HASH_DATA_8_BITS;
+	ctx->config.algorithm = hash_alg->conf.algorithm;
+	ctx->config.oper_mode = hash_alg->conf.oper_mode;
+
+	ctx->digestsize = hash_alg->hash.halg.digestsize;
+
+	return 0;
+}
+
+static struct hash_algo_template hash_algs[] = {
+	{
+		.conf.algorithm = HASH_ALGO_SHA1,
+		.conf.oper_mode = HASH_OPER_MODE_HASH,
+		.hash = {
+			.init = hash_init,
+			.update = ahash_update,
+			.final = ahash_final,
+			.digest = ahash_sha1_digest,
+			.export = ahash_noexport,
+			.import = ahash_noimport,
+			.halg.digestsize = SHA1_DIGEST_SIZE,
+			.halg.statesize = sizeof(struct hash_ctx),
+			.halg.base = {
+				.cra_name = "sha1",
+				.cra_driver_name = "sha1-ux500",
+				.cra_flags = CRYPTO_ALG_ASYNC,
+				.cra_blocksize = SHA1_BLOCK_SIZE,
+				.cra_ctxsize = sizeof(struct hash_ctx),
+				.cra_init = hash_cra_init,
+				.cra_module = THIS_MODULE,
+			}
+		}
+	},
+	{
+		.conf.algorithm	= HASH_ALGO_SHA256,
+		.conf.oper_mode	= HASH_OPER_MODE_HASH,
+		.hash = {
+			.init = hash_init,
+			.update	= ahash_update,
+			.final = ahash_final,
+			.digest = ahash_sha256_digest,
+			.export = ahash_noexport,
+			.import = ahash_noimport,
+			.halg.digestsize = SHA256_DIGEST_SIZE,
+			.halg.statesize = sizeof(struct hash_ctx),
+			.halg.base = {
+				.cra_name = "sha256",
+				.cra_driver_name = "sha256-ux500",
+				.cra_flags = CRYPTO_ALG_ASYNC,
+				.cra_blocksize = SHA256_BLOCK_SIZE,
+				.cra_ctxsize = sizeof(struct hash_ctx),
+				.cra_init = hash_cra_init,
+				.cra_module = THIS_MODULE,
+			}
+		}
+	},
+	{
+		.conf.algorithm = HASH_ALGO_SHA1,
+		.conf.oper_mode = HASH_OPER_MODE_HMAC,
+			.hash = {
+			.init = hash_init,
+			.update = ahash_update,
+			.final = ahash_final,
+			.digest = hmac_sha1_digest,
+			.setkey = hmac_sha1_setkey,
+			.export = ahash_noexport,
+			.import = ahash_noimport,
+			.halg.digestsize = SHA1_DIGEST_SIZE,
+			.halg.statesize = sizeof(struct hash_ctx),
+			.halg.base = {
+				.cra_name = "hmac(sha1)",
+				.cra_driver_name = "hmac-sha1-ux500",
+				.cra_flags = CRYPTO_ALG_ASYNC,
+				.cra_blocksize = SHA1_BLOCK_SIZE,
+				.cra_ctxsize = sizeof(struct hash_ctx),
+				.cra_init = hash_cra_init,
+				.cra_module = THIS_MODULE,
+			}
+		}
+	},
+	{
+		.conf.algorithm = HASH_ALGO_SHA256,
+		.conf.oper_mode = HASH_OPER_MODE_HMAC,
+		.hash = {
+			.init = hash_init,
+			.update = ahash_update,
+			.final = ahash_final,
+			.digest = hmac_sha256_digest,
+			.setkey = hmac_sha256_setkey,
+			.export = ahash_noexport,
+			.import = ahash_noimport,
+			.halg.digestsize = SHA256_DIGEST_SIZE,
+			.halg.statesize = sizeof(struct hash_ctx),
+			.halg.base = {
+				.cra_name = "hmac(sha256)",
+				.cra_driver_name = "hmac-sha256-ux500",
+				.cra_flags = CRYPTO_ALG_ASYNC,
+				.cra_blocksize = SHA256_BLOCK_SIZE,
+				.cra_ctxsize = sizeof(struct hash_ctx),
+				.cra_init = hash_cra_init,
+				.cra_module = THIS_MODULE,
+			}
+		}
+	}
+};
+
+/**
+ * hash_algs_register_all -
+ */
+static int ahash_algs_register_all(struct hash_device_data *device_data)
+{
+	int ret;
+	int i;
+	int count;
+
+	for (i = 0; i < ARRAY_SIZE(hash_algs); i++) {
+		ret = crypto_register_ahash(&hash_algs[i].hash);
+		if (ret) {
+			count = i;
+			dev_err(device_data->dev, "%s: alg registration failed\n",
+				hash_algs[i].hash.halg.base.cra_driver_name);
+			goto unreg;
+		}
+	}
+	return 0;
+unreg:
+	for (i = 0; i < count; i++)
+		crypto_unregister_ahash(&hash_algs[i].hash);
+	return ret;
+}
+
+/**
+ * hash_algs_unregister_all -
+ */
+static void ahash_algs_unregister_all(struct hash_device_data *device_data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(hash_algs); i++)
+		crypto_unregister_ahash(&hash_algs[i].hash);
+}
+
+/**
+ * ux500_hash_probe - Function that probes the hash hardware.
+ * @pdev: The platform device.
+ */
+static int ux500_hash_probe(struct platform_device *pdev)
+{
+	int			ret = 0;
+	struct resource		*res = NULL;
+	struct hash_device_data *device_data;
+	struct device		*dev = &pdev->dev;
+
+	device_data = devm_kzalloc(dev, sizeof(*device_data), GFP_ATOMIC);
+	if (!device_data) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	device_data->dev = dev;
+	device_data->current_ctx = NULL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_dbg(dev, "%s: platform_get_resource() failed!\n", __func__);
+		ret = -ENODEV;
+		goto out;
+	}
+
+	device_data->phybase = res->start;
+	device_data->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(device_data->base)) {
+		dev_err(dev, "%s: ioremap() failed!\n", __func__);
+		ret = PTR_ERR(device_data->base);
+		goto out;
+	}
+	spin_lock_init(&device_data->ctx_lock);
+	spin_lock_init(&device_data->power_state_lock);
+
+	/* Enable power for HASH1 hardware block */
+	device_data->regulator = regulator_get(dev, "v-ape");
+	if (IS_ERR(device_data->regulator)) {
+		dev_err(dev, "%s: regulator_get() failed!\n", __func__);
+		ret = PTR_ERR(device_data->regulator);
+		device_data->regulator = NULL;
+		goto out;
+	}
+
+	/* Enable the clock for HASH1 hardware block */
+	device_data->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(device_data->clk)) {
+		dev_err(dev, "%s: clk_get() failed!\n", __func__);
+		ret = PTR_ERR(device_data->clk);
+		goto out_regulator;
+	}
+
+	ret = clk_prepare(device_data->clk);
+	if (ret) {
+		dev_err(dev, "%s: clk_prepare() failed!\n", __func__);
+		goto out_regulator;
+	}
+
+	/* Enable device power (and clock) */
+	ret = hash_enable_power(device_data, false);
+	if (ret) {
+		dev_err(dev, "%s: hash_enable_power() failed!\n", __func__);
+		goto out_clk_unprepare;
+	}
+
+	ret = hash_check_hw(device_data);
+	if (ret) {
+		dev_err(dev, "%s: hash_check_hw() failed!\n", __func__);
+		goto out_power;
+	}
+
+	if (hash_mode == HASH_MODE_DMA)
+		hash_dma_setup_channel(device_data, dev);
+
+	platform_set_drvdata(pdev, device_data);
+
+	/* Put the new device into the device list... */
+	klist_add_tail(&device_data->list_node, &driver_data.device_list);
+	/* ... and signal that a new device is available. */
+	up(&driver_data.device_allocation);
+
+	ret = ahash_algs_register_all(device_data);
+	if (ret) {
+		dev_err(dev, "%s: ahash_algs_register_all() failed!\n",
+			__func__);
+		goto out_power;
+	}
+
+	dev_info(dev, "successfully registered\n");
+	return 0;
+
+out_power:
+	hash_disable_power(device_data, false);
+
+out_clk_unprepare:
+	clk_unprepare(device_data->clk);
+
+out_regulator:
+	regulator_put(device_data->regulator);
+
+out:
+	return ret;
+}
+
+/**
+ * ux500_hash_remove - Function that removes the hash device from the platform.
+ * @pdev: The platform device.
+ */
+static int ux500_hash_remove(struct platform_device *pdev)
+{
+	struct hash_device_data *device_data;
+	struct device		*dev = &pdev->dev;
+
+	device_data = platform_get_drvdata(pdev);
+	if (!device_data) {
+		dev_err(dev, "%s: platform_get_drvdata() failed!\n", __func__);
+		return -ENOMEM;
+	}
+
+	/* Try to decrease the number of available devices. */
+	if (down_trylock(&driver_data.device_allocation))
+		return -EBUSY;
+
+	/* Check that the device is free */
+	spin_lock(&device_data->ctx_lock);
+	/* current_ctx allocates a device, NULL = unallocated */
+	if (device_data->current_ctx) {
+		/* The device is busy */
+		spin_unlock(&device_data->ctx_lock);
+		/* Return the device to the pool. */
+		up(&driver_data.device_allocation);
+		return -EBUSY;
+	}
+
+	spin_unlock(&device_data->ctx_lock);
+
+	/* Remove the device from the list */
+	if (klist_node_attached(&device_data->list_node))
+		klist_remove(&device_data->list_node);
+
+	/* If this was the last device, remove the services */
+	if (list_empty(&driver_data.device_list.k_list))
+		ahash_algs_unregister_all(device_data);
+
+	if (hash_disable_power(device_data, false))
+		dev_err(dev, "%s: hash_disable_power() failed\n",
+			__func__);
+
+	clk_unprepare(device_data->clk);
+	regulator_put(device_data->regulator);
+
+	return 0;
+}
+
+/**
+ * ux500_hash_shutdown - Function that shutdown the hash device.
+ * @pdev: The platform device
+ */
+static void ux500_hash_shutdown(struct platform_device *pdev)
+{
+	struct hash_device_data *device_data;
+
+	device_data = platform_get_drvdata(pdev);
+	if (!device_data) {
+		dev_err(&pdev->dev, "%s: platform_get_drvdata() failed!\n",
+			__func__);
+		return;
+	}
+
+	/* Check that the device is free */
+	spin_lock(&device_data->ctx_lock);
+	/* current_ctx allocates a device, NULL = unallocated */
+	if (!device_data->current_ctx) {
+		if (down_trylock(&driver_data.device_allocation))
+			dev_dbg(&pdev->dev, "%s: Cryp still in use! Shutting down anyway...\n",
+				__func__);
+		/**
+		 * (Allocate the device)
+		 * Need to set this to non-null (dummy) value,
+		 * to avoid usage if context switching.
+		 */
+		device_data->current_ctx++;
+	}
+	spin_unlock(&device_data->ctx_lock);
+
+	/* Remove the device from the list */
+	if (klist_node_attached(&device_data->list_node))
+		klist_remove(&device_data->list_node);
+
+	/* If this was the last device, remove the services */
+	if (list_empty(&driver_data.device_list.k_list))
+		ahash_algs_unregister_all(device_data);
+
+	if (hash_disable_power(device_data, false))
+		dev_err(&pdev->dev, "%s: hash_disable_power() failed\n",
+			__func__);
+}
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * ux500_hash_suspend - Function that suspends the hash device.
+ * @dev:	Device to suspend.
+ */
+static int ux500_hash_suspend(struct device *dev)
+{
+	int ret;
+	struct hash_device_data *device_data;
+	struct hash_ctx *temp_ctx = NULL;
+
+	device_data = dev_get_drvdata(dev);
+	if (!device_data) {
+		dev_err(dev, "%s: platform_get_drvdata() failed!\n", __func__);
+		return -ENOMEM;
+	}
+
+	spin_lock(&device_data->ctx_lock);
+	if (!device_data->current_ctx)
+		device_data->current_ctx++;
+	spin_unlock(&device_data->ctx_lock);
+
+	if (device_data->current_ctx == ++temp_ctx) {
+		if (down_interruptible(&driver_data.device_allocation))
+			dev_dbg(dev, "%s: down_interruptible() failed\n",
+				__func__);
+		ret = hash_disable_power(device_data, false);
+
+	} else {
+		ret = hash_disable_power(device_data, true);
+	}
+
+	if (ret)
+		dev_err(dev, "%s: hash_disable_power()\n", __func__);
+
+	return ret;
+}
+
+/**
+ * ux500_hash_resume - Function that resume the hash device.
+ * @dev:	Device to resume.
+ */
+static int ux500_hash_resume(struct device *dev)
+{
+	int ret = 0;
+	struct hash_device_data *device_data;
+	struct hash_ctx *temp_ctx = NULL;
+
+	device_data = dev_get_drvdata(dev);
+	if (!device_data) {
+		dev_err(dev, "%s: platform_get_drvdata() failed!\n", __func__);
+		return -ENOMEM;
+	}
+
+	spin_lock(&device_data->ctx_lock);
+	if (device_data->current_ctx == ++temp_ctx)
+		device_data->current_ctx = NULL;
+	spin_unlock(&device_data->ctx_lock);
+
+	if (!device_data->current_ctx)
+		up(&driver_data.device_allocation);
+	else
+		ret = hash_enable_power(device_data, true);
+
+	if (ret)
+		dev_err(dev, "%s: hash_enable_power() failed!\n", __func__);
+
+	return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ux500_hash_pm, ux500_hash_suspend, ux500_hash_resume);
+
+static const struct of_device_id ux500_hash_match[] = {
+	{ .compatible = "stericsson,ux500-hash" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ux500_hash_match);
+
+static struct platform_driver hash_driver = {
+	.probe  = ux500_hash_probe,
+	.remove = ux500_hash_remove,
+	.shutdown = ux500_hash_shutdown,
+	.driver = {
+		.name  = "hash1",
+		.of_match_table = ux500_hash_match,
+		.pm    = &ux500_hash_pm,
+	}
+};
+
+/**
+ * ux500_hash_mod_init - The kernel module init function.
+ */
+static int __init ux500_hash_mod_init(void)
+{
+	klist_init(&driver_data.device_list, NULL, NULL);
+	/* Initialize the semaphore to 0 devices (locked state) */
+	sema_init(&driver_data.device_allocation, 0);
+
+	return platform_driver_register(&hash_driver);
+}
+
+/**
+ * ux500_hash_mod_fini - The kernel module exit function.
+ */
+static void __exit ux500_hash_mod_fini(void)
+{
+	platform_driver_unregister(&hash_driver);
+}
+
+module_init(ux500_hash_mod_init);
+module_exit(ux500_hash_mod_fini);
+
+MODULE_DESCRIPTION("Driver for ST-Ericsson UX500 HASH engine.");
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS_CRYPTO("sha1-all");
+MODULE_ALIAS_CRYPTO("sha256-all");
+MODULE_ALIAS_CRYPTO("hmac-sha1-all");
+MODULE_ALIAS_CRYPTO("hmac-sha256-all");