Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

71 files changed, 51173 insertions, 0 deletions

diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
new file mode 100644
index 000000000..b00cc03ad
--- /dev/null
+++ b/drivers/edac/Kconfig
@@ -0,0 +1,463 @@
+#
+#	EDAC Kconfig
+#	Copyright (c) 2008 Doug Thompson www.softwarebitmaker.com
+#	Licensed and distributed under the GPL
+
+config EDAC_ATOMIC_SCRUB
+	bool
+
+config EDAC_SUPPORT
+	bool
+
+menuconfig EDAC
+	tristate "EDAC (Error Detection And Correction) reporting"
+	depends on HAS_IOMEM && EDAC_SUPPORT && RAS
+	help
+	  EDAC is a subsystem along with hardware-specific drivers designed to
+	  report hardware errors. These are low-level errors that are reported
+	  in the CPU or supporting chipset or other subsystems:
+	  memory errors, cache errors, PCI errors, thermal throttling, etc..
+	  If unsure, select 'Y'.
+
+	  The mailing list for the EDAC project is linux-edac@vger.kernel.org.
+
+if EDAC
+
+config EDAC_LEGACY_SYSFS
+	bool "EDAC legacy sysfs"
+	default y
+	help
+	  Enable the compatibility sysfs nodes.
+	  Use 'Y' if your edac utilities aren't ported to work with the newer
+	  structures.
+
+config EDAC_DEBUG
+	bool "Debugging"
+	select DEBUG_FS
+	help
+	  This turns on debugging information for the entire EDAC subsystem.
+	  You do so by inserting edac_module with "edac_debug_level=x." Valid
+	  levels are 0-4 (from low to high) and by default it is set to 2.
+	  Usually you should select 'N' here.
+
+config EDAC_DECODE_MCE
+	tristate "Decode MCEs in human-readable form (only on AMD for now)"
+	depends on CPU_SUP_AMD && X86_MCE_AMD
+	default y
+	---help---
+	  Enable this option if you want to decode Machine Check Exceptions
+	  occurring on your machine in human-readable form.
+
+	  You should definitely say Y here in case you want to decode MCEs
+	  which occur really early upon boot, before the module infrastructure
+	  has been initialized.
+
+config EDAC_GHES
+	bool "Output ACPI APEI/GHES BIOS detected errors via EDAC"
+	depends on ACPI_APEI_GHES && (EDAC=y)
+	help
+	  Not all machines support hardware-driven error report. Some of those
+	  provide a BIOS-driven error report mechanism via ACPI, using the
+	  APEI/GHES driver. By enabling this option, the error reports provided
+	  by GHES are sent to userspace via the EDAC API.
+
+	  When this option is enabled, it will disable the hardware-driven
+	  mechanisms, if a GHES BIOS is detected, entering into the
+	  "Firmware First" mode.
+
+	  It should be noticed that keeping both GHES and a hardware-driven
+	  error mechanism won't work well, as BIOS will race with OS, while
+	  reading the error registers. So, if you want to not use "Firmware
+	  first" GHES error mechanism, you should disable GHES either at
+	  compilation time or by passing "ghes.disable=1" Kernel parameter
+	  at boot time.
+
+	  In doubt, say 'Y'.
+
+config EDAC_AMD64
+	tristate "AMD64 (Opteron, Athlon64)"
+	depends on AMD_NB && EDAC_DECODE_MCE
+	help
+	  Support for error detection and correction of DRAM ECC errors on
+	  the AMD64 families (>= K8) of memory controllers.
+
+config EDAC_AMD64_ERROR_INJECTION
+	bool "Sysfs HW Error injection facilities"
+	depends on EDAC_AMD64
+	help
+	  Recent Opterons (Family 10h and later) provide for Memory Error
+	  Injection into the ECC detection circuits. The amd64_edac module
+	  allows the operator/user to inject Uncorrectable and Correctable
+	  errors into DRAM.
+
+	  When enabled, in each of the respective memory controller directories
+	  (/sys/devices/system/edac/mc/mcX), there are 3 input files:
+
+	  - inject_section (0..3, 16-byte section of 64-byte cacheline),
+	  - inject_word (0..8, 16-bit word of 16-byte section),
+	  - inject_ecc_vector (hex ecc vector: select bits of inject word)
+
+	  In addition, there are two control files, inject_read and inject_write,
+	  which trigger the DRAM ECC Read and Write respectively.
+
+config EDAC_AMD76X
+	tristate "AMD 76x (760, 762, 768)"
+	depends on PCI && X86_32
+	help
+	  Support for error detection and correction on the AMD 76x
+	  series of chipsets used with the Athlon processor.
+
+config EDAC_E7XXX
+	tristate "Intel e7xxx (e7205, e7500, e7501, e7505)"
+	depends on PCI && X86_32
+	help
+	  Support for error detection and correction on the Intel
+	  E7205, E7500, E7501 and E7505 server chipsets.
+
+config EDAC_E752X
+	tristate "Intel e752x (e7520, e7525, e7320) and 3100"
+	depends on PCI && X86
+	help
+	  Support for error detection and correction on the Intel
+	  E7520, E7525, E7320 server chipsets.
+
+config EDAC_I82443BXGX
+	tristate "Intel 82443BX/GX (440BX/GX)"
+	depends on PCI && X86_32
+	depends on BROKEN
+	help
+	  Support for error detection and correction on the Intel
+	  82443BX/GX memory controllers (440BX/GX chipsets).
+
+config EDAC_I82875P
+	tristate "Intel 82875p (D82875P, E7210)"
+	depends on PCI && X86_32
+	help
+	  Support for error detection and correction on the Intel
+	  DP82785P and E7210 server chipsets.
+
+config EDAC_I82975X
+	tristate "Intel 82975x (D82975x)"
+	depends on PCI && X86
+	help
+	  Support for error detection and correction on the Intel
+	  DP82975x server chipsets.
+
+config EDAC_I3000
+	tristate "Intel 3000/3010"
+	depends on PCI && X86
+	help
+	  Support for error detection and correction on the Intel
+	  3000 and 3010 server chipsets.
+
+config EDAC_I3200
+	tristate "Intel 3200"
+	depends on PCI && X86
+	help
+	  Support for error detection and correction on the Intel
+	  3200 and 3210 server chipsets.
+
+config EDAC_IE31200
+	tristate "Intel e312xx"
+	depends on PCI && X86
+	help
+	  Support for error detection and correction on the Intel
+	  E3-1200 based DRAM controllers.
+
+config EDAC_X38
+	tristate "Intel X38"
+	depends on PCI && X86
+	help
+	  Support for error detection and correction on the Intel
+	  X38 server chipsets.
+
+config EDAC_I5400
+	tristate "Intel 5400 (Seaburg) chipsets"
+	depends on PCI && X86
+	help
+	  Support for error detection and correction the Intel
+	  i5400 MCH chipset (Seaburg).
+
+config EDAC_I7CORE
+	tristate "Intel i7 Core (Nehalem) processors"
+	depends on PCI && X86 && X86_MCE_INTEL
+	help
+	  Support for error detection and correction the Intel
+	  i7 Core (Nehalem) Integrated Memory Controller that exists on
+	  newer processors like i7 Core, i7 Core Extreme, Xeon 35xx
+	  and Xeon 55xx processors.
+
+config EDAC_I82860
+	tristate "Intel 82860"
+	depends on PCI && X86_32
+	help
+	  Support for error detection and correction on the Intel
+	  82860 chipset.
+
+config EDAC_R82600
+	tristate "Radisys 82600 embedded chipset"
+	depends on PCI && X86_32
+	help
+	  Support for error detection and correction on the Radisys
+	  82600 embedded chipset.
+
+config EDAC_I5000
+	tristate "Intel Greencreek/Blackford chipset"
+	depends on X86 && PCI
+	help
+	  Support for error detection and correction the Intel
+	  Greekcreek/Blackford chipsets.
+
+config EDAC_I5100
+	tristate "Intel San Clemente MCH"
+	depends on X86 && PCI
+	help
+	  Support for error detection and correction the Intel
+	  San Clemente MCH.
+
+config EDAC_I7300
+	tristate "Intel Clarksboro MCH"
+	depends on X86 && PCI
+	help
+	  Support for error detection and correction the Intel
+	  Clarksboro MCH (Intel 7300 chipset).
+
+config EDAC_SBRIDGE
+	tristate "Intel Sandy-Bridge/Ivy-Bridge/Haswell Integrated MC"
+	depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG
+	help
+	  Support for error detection and correction the Intel
+	  Sandy Bridge, Ivy Bridge and Haswell Integrated Memory Controllers.
+
+config EDAC_SKX
+	tristate "Intel Skylake server Integrated MC"
+	depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG
+	depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_SKX can't be y
+	select DMI
+	help
+	  Support for error detection and correction the Intel
+	  Skylake server Integrated Memory Controllers. If your
+	  system has non-volatile DIMMs you should also manually
+	  select CONFIG_ACPI_NFIT.
+
+config EDAC_PND2
+	tristate "Intel Pondicherry2"
+	depends on PCI && X86_64 && X86_MCE_INTEL
+	help
+	  Support for error detection and correction on the Intel
+	  Pondicherry2 Integrated Memory Controller. This SoC IP is
+	  first used on the Apollo Lake platform and Denverton
+	  micro-server but may appear on others in the future.
+
+config EDAC_MPC85XX
+	bool "Freescale MPC83xx / MPC85xx"
+	depends on FSL_SOC && EDAC=y
+	help
+	  Support for error detection and correction on the Freescale
+	  MPC8349, MPC8560, MPC8540, MPC8548, T4240
+
+config EDAC_LAYERSCAPE
+	tristate "Freescale Layerscape DDR"
+	depends on ARCH_LAYERSCAPE || SOC_LS1021A
+	help
+	  Support for error detection and correction on Freescale memory
+	  controllers on Layerscape SoCs.
+
+config EDAC_MV64X60
+	tristate "Marvell MV64x60"
+	depends on MV64X60
+	help
+	  Support for error detection and correction on the Marvell
+	  MV64360 and MV64460 chipsets.
+
+config EDAC_PASEMI
+	tristate "PA Semi PWRficient"
+	depends on PPC_PASEMI && PCI
+	help
+	  Support for error detection and correction on PA Semi
+	  PWRficient.
+
+config EDAC_CELL
+	tristate "Cell Broadband Engine memory controller"
+	depends on PPC_CELL_COMMON
+	help
+	  Support for error detection and correction on the
+	  Cell Broadband Engine internal memory controller
+	  on platform without a hypervisor
+
+config EDAC_PPC4XX
+	tristate "PPC4xx IBM DDR2 Memory Controller"
+	depends on 4xx
+	help
+	  This enables support for EDAC on the ECC memory used
+	  with the IBM DDR2 memory controller found in various
+	  PowerPC 4xx embedded processors such as the 405EX[r],
+	  440SP, 440SPe, 460EX, 460GT and 460SX.
+
+config EDAC_AMD8131
+	tristate "AMD8131 HyperTransport PCI-X Tunnel"
+	depends on PCI && PPC_MAPLE
+	help
+	  Support for error detection and correction on the
+	  AMD8131 HyperTransport PCI-X Tunnel chip.
+	  Note, add more Kconfig dependency if it's adopted
+	  on some machine other than Maple.
+
+config EDAC_AMD8111
+	tristate "AMD8111 HyperTransport I/O Hub"
+	depends on PCI && PPC_MAPLE
+	help
+	  Support for error detection and correction on the
+	  AMD8111 HyperTransport I/O Hub chip.
+	  Note, add more Kconfig dependency if it's adopted
+	  on some machine other than Maple.
+
+config EDAC_CPC925
+	tristate "IBM CPC925 Memory Controller (PPC970FX)"
+	depends on PPC64
+	help
+	  Support for error detection and correction on the
+	  IBM CPC925 Bridge and Memory Controller, which is
+	  a companion chip to the PowerPC 970 family of
+	  processors.
+
+config EDAC_HIGHBANK_MC
+	tristate "Highbank Memory Controller"
+	depends on ARCH_HIGHBANK
+	help
+	  Support for error detection and correction on the
+	  Calxeda Highbank memory controller.
+
+config EDAC_HIGHBANK_L2
+	tristate "Highbank L2 Cache"
+	depends on ARCH_HIGHBANK
+	help
+	  Support for error detection and correction on the
+	  Calxeda Highbank memory controller.
+
+config EDAC_OCTEON_PC
+	tristate "Cavium Octeon Primary Caches"
+	depends on CPU_CAVIUM_OCTEON
+	help
+	  Support for error detection and correction on the primary caches of
+	  the cnMIPS cores of Cavium Octeon family SOCs.
+
+config EDAC_OCTEON_L2C
+	tristate "Cavium Octeon Secondary Caches (L2C)"
+	depends on CAVIUM_OCTEON_SOC
+	help
+	  Support for error detection and correction on the
+	  Cavium Octeon family of SOCs.
+
+config EDAC_OCTEON_LMC
+	tristate "Cavium Octeon DRAM Memory Controller (LMC)"
+	depends on CAVIUM_OCTEON_SOC
+	help
+	  Support for error detection and correction on the
+	  Cavium Octeon family of SOCs.
+
+config EDAC_OCTEON_PCI
+	tristate "Cavium Octeon PCI Controller"
+	depends on PCI && CAVIUM_OCTEON_SOC
+	help
+	  Support for error detection and correction on the
+	  Cavium Octeon family of SOCs.
+
+config EDAC_THUNDERX
+	tristate "Cavium ThunderX EDAC"
+	depends on ARM64
+	depends on PCI
+	help
+	  Support for error detection and correction on the
+	  Cavium ThunderX memory controllers (LMC), Cache
+	  Coherent Processor Interconnect (CCPI) and L2 cache
+	  blocks (TAD, CBC, MCI).
+
+config EDAC_ALTERA
+	bool "Altera SOCFPGA ECC"
+	depends on EDAC=y && (ARCH_SOCFPGA || ARCH_STRATIX10)
+	help
+	  Support for error detection and correction on the
+	  Altera SOCs. This must be selected for SDRAM ECC.
+	  Note that the preloader must initialize the SDRAM
+	  before loading the kernel.
+
+config EDAC_ALTERA_L2C
+	bool "Altera L2 Cache ECC"
+	depends on EDAC_ALTERA=y && CACHE_L2X0
+	help
+	  Support for error detection and correction on the
+	  Altera L2 cache Memory for Altera SoCs. This option
+	  requires L2 cache.
+
+config EDAC_ALTERA_OCRAM
+	bool "Altera On-Chip RAM ECC"
+	depends on EDAC_ALTERA=y && SRAM && GENERIC_ALLOCATOR
+	help
+	  Support for error detection and correction on the
+	  Altera On-Chip RAM Memory for Altera SoCs.
+
+config EDAC_ALTERA_ETHERNET
+	bool "Altera Ethernet FIFO ECC"
+	depends on EDAC_ALTERA=y
+	help
+	  Support for error detection and correction on the
+	  Altera Ethernet FIFO Memory for Altera SoCs.
+
+config EDAC_ALTERA_NAND
+	bool "Altera NAND FIFO ECC"
+	depends on EDAC_ALTERA=y && MTD_NAND_DENALI
+	help
+	  Support for error detection and correction on the
+	  Altera NAND FIFO Memory for Altera SoCs.
+
+config EDAC_ALTERA_DMA
+	bool "Altera DMA FIFO ECC"
+	depends on EDAC_ALTERA=y && PL330_DMA=y
+	help
+	  Support for error detection and correction on the
+	  Altera DMA FIFO Memory for Altera SoCs.
+
+config EDAC_ALTERA_USB
+	bool "Altera USB FIFO ECC"
+	depends on EDAC_ALTERA=y && USB_DWC2
+	help
+	  Support for error detection and correction on the
+	  Altera USB FIFO Memory for Altera SoCs.
+
+config EDAC_ALTERA_QSPI
+	bool "Altera QSPI FIFO ECC"
+	depends on EDAC_ALTERA=y && SPI_CADENCE_QUADSPI
+	help
+	  Support for error detection and correction on the
+	  Altera QSPI FIFO Memory for Altera SoCs.
+
+config EDAC_ALTERA_SDMMC
+	bool "Altera SDMMC FIFO ECC"
+	depends on EDAC_ALTERA=y && MMC_DW
+	help
+	  Support for error detection and correction on the
+	  Altera SDMMC FIFO Memory for Altera SoCs.
+
+config EDAC_SYNOPSYS
+	tristate "Synopsys DDR Memory Controller"
+	depends on ARCH_ZYNQ
+	help
+	  Support for error detection and correction on the Synopsys DDR
+	  memory controller.
+
+config EDAC_XGENE
+	tristate "APM X-Gene SoC"
+	depends on (ARM64 || COMPILE_TEST)
+	help
+	  Support for error detection and correction on the
+	  APM X-Gene family of SOCs.
+
+config EDAC_TI
+	tristate "Texas Instruments DDR3 ECC Controller"
+	depends on ARCH_KEYSTONE || SOC_DRA7XX
+	help
+	  Support for error detection and correction on the
+          TI SoCs.
+
+endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
new file mode 100644
index 000000000..02b43a7d8
--- /dev/null
+++ b/drivers/edac/Makefile
@@ -0,0 +1,79 @@
+#
+# Makefile for the Linux kernel EDAC drivers.
+#
+# Copyright 02 Jul 2003, Linux Networx (http://lnxi.com)
+# This file may be distributed under the terms of the
+# GNU General Public License.
+#
+
+obj-$(CONFIG_EDAC)			:= edac_core.o
+
+edac_core-y	:= edac_mc.o edac_device.o edac_mc_sysfs.o
+edac_core-y	+= edac_module.o edac_device_sysfs.o wq.o
+
+edac_core-$(CONFIG_EDAC_DEBUG)		+= debugfs.o
+
+ifdef CONFIG_PCI
+edac_core-y	+= edac_pci.o edac_pci_sysfs.o
+endif
+
+obj-$(CONFIG_EDAC_GHES)			+= ghes_edac.o
+
+edac_mce_amd-y				:= mce_amd.o
+obj-$(CONFIG_EDAC_DECODE_MCE)		+= edac_mce_amd.o
+
+obj-$(CONFIG_EDAC_AMD76X)		+= amd76x_edac.o
+obj-$(CONFIG_EDAC_CPC925)		+= cpc925_edac.o
+obj-$(CONFIG_EDAC_I5000)		+= i5000_edac.o
+obj-$(CONFIG_EDAC_I5100)		+= i5100_edac.o
+obj-$(CONFIG_EDAC_I5400)		+= i5400_edac.o
+obj-$(CONFIG_EDAC_I7300)		+= i7300_edac.o
+obj-$(CONFIG_EDAC_I7CORE)		+= i7core_edac.o
+obj-$(CONFIG_EDAC_SBRIDGE)		+= sb_edac.o
+obj-$(CONFIG_EDAC_SKX)			+= skx_edac.o
+obj-$(CONFIG_EDAC_PND2)			+= pnd2_edac.o
+obj-$(CONFIG_EDAC_E7XXX)		+= e7xxx_edac.o
+obj-$(CONFIG_EDAC_E752X)		+= e752x_edac.o
+obj-$(CONFIG_EDAC_I82443BXGX)		+= i82443bxgx_edac.o
+obj-$(CONFIG_EDAC_I82875P)		+= i82875p_edac.o
+obj-$(CONFIG_EDAC_I82975X)		+= i82975x_edac.o
+obj-$(CONFIG_EDAC_I3000)		+= i3000_edac.o
+obj-$(CONFIG_EDAC_I3200)		+= i3200_edac.o
+obj-$(CONFIG_EDAC_IE31200)		+= ie31200_edac.o
+obj-$(CONFIG_EDAC_X38)			+= x38_edac.o
+obj-$(CONFIG_EDAC_I82860)		+= i82860_edac.o
+obj-$(CONFIG_EDAC_R82600)		+= r82600_edac.o
+
+amd64_edac_mod-y := amd64_edac.o
+amd64_edac_mod-$(CONFIG_EDAC_DEBUG) += amd64_edac_dbg.o
+amd64_edac_mod-$(CONFIG_EDAC_AMD64_ERROR_INJECTION) += amd64_edac_inj.o
+
+obj-$(CONFIG_EDAC_AMD64)		+= amd64_edac_mod.o
+
+obj-$(CONFIG_EDAC_PASEMI)		+= pasemi_edac.o
+
+mpc85xx_edac_mod-y			:= fsl_ddr_edac.o mpc85xx_edac.o
+obj-$(CONFIG_EDAC_MPC85XX)		+= mpc85xx_edac_mod.o
+
+layerscape_edac_mod-y			:= fsl_ddr_edac.o layerscape_edac.o
+obj-$(CONFIG_EDAC_LAYERSCAPE)		+= layerscape_edac_mod.o
+
+obj-$(CONFIG_EDAC_MV64X60)		+= mv64x60_edac.o
+obj-$(CONFIG_EDAC_CELL)			+= cell_edac.o
+obj-$(CONFIG_EDAC_PPC4XX)		+= ppc4xx_edac.o
+obj-$(CONFIG_EDAC_AMD8111)		+= amd8111_edac.o
+obj-$(CONFIG_EDAC_AMD8131)		+= amd8131_edac.o
+
+obj-$(CONFIG_EDAC_HIGHBANK_MC)		+= highbank_mc_edac.o
+obj-$(CONFIG_EDAC_HIGHBANK_L2)		+= highbank_l2_edac.o
+
+obj-$(CONFIG_EDAC_OCTEON_PC)		+= octeon_edac-pc.o
+obj-$(CONFIG_EDAC_OCTEON_L2C)		+= octeon_edac-l2c.o
+obj-$(CONFIG_EDAC_OCTEON_LMC)		+= octeon_edac-lmc.o
+obj-$(CONFIG_EDAC_OCTEON_PCI)		+= octeon_edac-pci.o
+obj-$(CONFIG_EDAC_THUNDERX)		+= thunderx_edac.o
+
+obj-$(CONFIG_EDAC_ALTERA)		+= altera_edac.o
+obj-$(CONFIG_EDAC_SYNOPSYS)		+= synopsys_edac.o
+obj-$(CONFIG_EDAC_XGENE)		+= xgene_edac.o
+obj-$(CONFIG_EDAC_TI)			+= ti_edac.o
diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
new file mode 100644
index 000000000..3145d009d
--- /dev/null
+++ b/drivers/edac/altera_edac.c
@@ -0,0 +1,2407 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2017-2018, Intel Corporation. All rights reserved
+ *  Copyright Altera Corporation (C) 2014-2016. All rights reserved.
+ *  Copyright 2011-2012 Calxeda, Inc.
+ */
+
+#include <asm/cacheflush.h>
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/edac.h>
+#include <linux/genalloc.h>
+#include <linux/interrupt.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/notifier.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+
+#include "altera_edac.h"
+#include "edac_module.h"
+
+#define EDAC_MOD_STR		"altera_edac"
+#define EDAC_DEVICE		"Altera"
+
+static const struct altr_sdram_prv_data c5_data = {
+	.ecc_ctrl_offset    = CV_CTLCFG_OFST,
+	.ecc_ctl_en_mask    = CV_CTLCFG_ECC_AUTO_EN,
+	.ecc_stat_offset    = CV_DRAMSTS_OFST,
+	.ecc_stat_ce_mask   = CV_DRAMSTS_SBEERR,
+	.ecc_stat_ue_mask   = CV_DRAMSTS_DBEERR,
+	.ecc_saddr_offset   = CV_ERRADDR_OFST,
+	.ecc_daddr_offset   = CV_ERRADDR_OFST,
+	.ecc_cecnt_offset   = CV_SBECOUNT_OFST,
+	.ecc_uecnt_offset   = CV_DBECOUNT_OFST,
+	.ecc_irq_en_offset  = CV_DRAMINTR_OFST,
+	.ecc_irq_en_mask    = CV_DRAMINTR_INTREN,
+	.ecc_irq_clr_offset = CV_DRAMINTR_OFST,
+	.ecc_irq_clr_mask   = (CV_DRAMINTR_INTRCLR | CV_DRAMINTR_INTREN),
+	.ecc_cnt_rst_offset = CV_DRAMINTR_OFST,
+	.ecc_cnt_rst_mask   = CV_DRAMINTR_INTRCLR,
+	.ce_ue_trgr_offset  = CV_CTLCFG_OFST,
+	.ce_set_mask        = CV_CTLCFG_GEN_SB_ERR,
+	.ue_set_mask        = CV_CTLCFG_GEN_DB_ERR,
+};
+
+static const struct altr_sdram_prv_data a10_data = {
+	.ecc_ctrl_offset    = A10_ECCCTRL1_OFST,
+	.ecc_ctl_en_mask    = A10_ECCCTRL1_ECC_EN,
+	.ecc_stat_offset    = A10_INTSTAT_OFST,
+	.ecc_stat_ce_mask   = A10_INTSTAT_SBEERR,
+	.ecc_stat_ue_mask   = A10_INTSTAT_DBEERR,
+	.ecc_saddr_offset   = A10_SERRADDR_OFST,
+	.ecc_daddr_offset   = A10_DERRADDR_OFST,
+	.ecc_irq_en_offset  = A10_ERRINTEN_OFST,
+	.ecc_irq_en_mask    = A10_ECC_IRQ_EN_MASK,
+	.ecc_irq_clr_offset = A10_INTSTAT_OFST,
+	.ecc_irq_clr_mask   = (A10_INTSTAT_SBEERR | A10_INTSTAT_DBEERR),
+	.ecc_cnt_rst_offset = A10_ECCCTRL1_OFST,
+	.ecc_cnt_rst_mask   = A10_ECC_CNT_RESET_MASK,
+	.ce_ue_trgr_offset  = A10_DIAGINTTEST_OFST,
+	.ce_set_mask        = A10_DIAGINT_TSERRA_MASK,
+	.ue_set_mask        = A10_DIAGINT_TDERRA_MASK,
+};
+
+static const struct altr_sdram_prv_data s10_data = {
+	.ecc_ctrl_offset    = S10_ECCCTRL1_OFST,
+	.ecc_ctl_en_mask    = A10_ECCCTRL1_ECC_EN,
+	.ecc_stat_offset    = S10_INTSTAT_OFST,
+	.ecc_stat_ce_mask   = A10_INTSTAT_SBEERR,
+	.ecc_stat_ue_mask   = A10_INTSTAT_DBEERR,
+	.ecc_saddr_offset   = S10_SERRADDR_OFST,
+	.ecc_daddr_offset   = S10_DERRADDR_OFST,
+	.ecc_irq_en_offset  = S10_ERRINTEN_OFST,
+	.ecc_irq_en_mask    = A10_ECC_IRQ_EN_MASK,
+	.ecc_irq_clr_offset = S10_INTSTAT_OFST,
+	.ecc_irq_clr_mask   = (A10_INTSTAT_SBEERR | A10_INTSTAT_DBEERR),
+	.ecc_cnt_rst_offset = S10_ECCCTRL1_OFST,
+	.ecc_cnt_rst_mask   = A10_ECC_CNT_RESET_MASK,
+	.ce_ue_trgr_offset  = S10_DIAGINTTEST_OFST,
+	.ce_set_mask        = A10_DIAGINT_TSERRA_MASK,
+	.ue_set_mask        = A10_DIAGINT_TDERRA_MASK,
+};
+
+/*********************** EDAC Memory Controller Functions ****************/
+
+/* The SDRAM controller uses the EDAC Memory Controller framework.       */
+
+static irqreturn_t altr_sdram_mc_err_handler(int irq, void *dev_id)
+{
+	struct mem_ctl_info *mci = dev_id;
+	struct altr_sdram_mc_data *drvdata = mci->pvt_info;
+	const struct altr_sdram_prv_data *priv = drvdata->data;
+	u32 status, err_count = 1, err_addr;
+
+	regmap_read(drvdata->mc_vbase, priv->ecc_stat_offset, &status);
+
+	if (status & priv->ecc_stat_ue_mask) {
+		regmap_read(drvdata->mc_vbase, priv->ecc_daddr_offset,
+			    &err_addr);
+		if (priv->ecc_uecnt_offset)
+			regmap_read(drvdata->mc_vbase, priv->ecc_uecnt_offset,
+				    &err_count);
+		panic("\nEDAC: [%d Uncorrectable errors @ 0x%08X]\n",
+		      err_count, err_addr);
+	}
+	if (status & priv->ecc_stat_ce_mask) {
+		regmap_read(drvdata->mc_vbase, priv->ecc_saddr_offset,
+			    &err_addr);
+		if (priv->ecc_uecnt_offset)
+			regmap_read(drvdata->mc_vbase,  priv->ecc_cecnt_offset,
+				    &err_count);
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count,
+				     err_addr >> PAGE_SHIFT,
+				     err_addr & ~PAGE_MASK, 0,
+				     0, 0, -1, mci->ctl_name, "");
+		/* Clear IRQ to resume */
+		regmap_write(drvdata->mc_vbase,	priv->ecc_irq_clr_offset,
+			     priv->ecc_irq_clr_mask);
+
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
+}
+
+static ssize_t altr_sdr_mc_err_inject_write(struct file *file,
+					    const char __user *data,
+					    size_t count, loff_t *ppos)
+{
+	struct mem_ctl_info *mci = file->private_data;
+	struct altr_sdram_mc_data *drvdata = mci->pvt_info;
+	const struct altr_sdram_prv_data *priv = drvdata->data;
+	u32 *ptemp;
+	dma_addr_t dma_handle;
+	u32 reg, read_reg;
+
+	ptemp = dma_alloc_coherent(mci->pdev, 16, &dma_handle, GFP_KERNEL);
+	if (!ptemp) {
+		dma_free_coherent(mci->pdev, 16, ptemp, dma_handle);
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Inject: Buffer Allocation error\n");
+		return -ENOMEM;
+	}
+
+	regmap_read(drvdata->mc_vbase, priv->ce_ue_trgr_offset,
+		    &read_reg);
+	read_reg &= ~(priv->ce_set_mask | priv->ue_set_mask);
+
+	/* Error are injected by writing a word while the SBE or DBE
+	 * bit in the CTLCFG register is set. Reading the word will
+	 * trigger the SBE or DBE error and the corresponding IRQ.
+	 */
+	if (count == 3) {
+		edac_printk(KERN_ALERT, EDAC_MC,
+			    "Inject Double bit error\n");
+		local_irq_disable();
+		regmap_write(drvdata->mc_vbase, priv->ce_ue_trgr_offset,
+			     (read_reg | priv->ue_set_mask));
+		local_irq_enable();
+	} else {
+		edac_printk(KERN_ALERT, EDAC_MC,
+			    "Inject Single bit error\n");
+		local_irq_disable();
+		regmap_write(drvdata->mc_vbase,	priv->ce_ue_trgr_offset,
+			     (read_reg | priv->ce_set_mask));
+		local_irq_enable();
+	}
+
+	ptemp[0] = 0x5A5A5A5A;
+	ptemp[1] = 0xA5A5A5A5;
+
+	/* Clear the error injection bits */
+	regmap_write(drvdata->mc_vbase,	priv->ce_ue_trgr_offset, read_reg);
+	/* Ensure it has been written out */
+	wmb();
+
+	/*
+	 * To trigger the error, we need to read the data back
+	 * (the data was written with errors above).
+	 * The READ_ONCE macros and printk are used to prevent the
+	 * the compiler optimizing these reads out.
+	 */
+	reg = READ_ONCE(ptemp[0]);
+	read_reg = READ_ONCE(ptemp[1]);
+	/* Force Read */
+	rmb();
+
+	edac_printk(KERN_ALERT, EDAC_MC, "Read Data [0x%X, 0x%X]\n",
+		    reg, read_reg);
+
+	dma_free_coherent(mci->pdev, 16, ptemp, dma_handle);
+
+	return count;
+}
+
+static const struct file_operations altr_sdr_mc_debug_inject_fops = {
+	.open = simple_open,
+	.write = altr_sdr_mc_err_inject_write,
+	.llseek = generic_file_llseek,
+};
+
+static void altr_sdr_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
+{
+	if (!IS_ENABLED(CONFIG_EDAC_DEBUG))
+		return;
+
+	if (!mci->debugfs)
+		return;
+
+	edac_debugfs_create_file("altr_trigger", S_IWUSR, mci->debugfs, mci,
+				 &altr_sdr_mc_debug_inject_fops);
+}
+
+/* Get total memory size from Open Firmware DTB */
+static unsigned long get_total_mem(void)
+{
+	struct device_node *np = NULL;
+	struct resource res;
+	int ret;
+	unsigned long total_mem = 0;
+
+	for_each_node_by_type(np, "memory") {
+		ret = of_address_to_resource(np, 0, &res);
+		if (ret)
+			continue;
+
+		total_mem += resource_size(&res);
+	}
+	edac_dbg(0, "total_mem 0x%lx\n", total_mem);
+	return total_mem;
+}
+
+static const struct of_device_id altr_sdram_ctrl_of_match[] = {
+	{ .compatible = "altr,sdram-edac", .data = &c5_data},
+	{ .compatible = "altr,sdram-edac-a10", .data = &a10_data},
+	{ .compatible = "altr,sdram-edac-s10", .data = &s10_data},
+	{},
+};
+MODULE_DEVICE_TABLE(of, altr_sdram_ctrl_of_match);
+
+static int a10_init(struct regmap *mc_vbase)
+{
+	if (regmap_update_bits(mc_vbase, A10_INTMODE_OFST,
+			       A10_INTMODE_SB_INT, A10_INTMODE_SB_INT)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Error setting SB IRQ mode\n");
+		return -ENODEV;
+	}
+
+	if (regmap_write(mc_vbase, A10_SERRCNTREG_OFST, 1)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Error setting trigger count\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int a10_unmask_irq(struct platform_device *pdev, u32 mask)
+{
+	void __iomem  *sm_base;
+	int  ret = 0;
+
+	if (!request_mem_region(A10_SYMAN_INTMASK_CLR, sizeof(u32),
+				dev_name(&pdev->dev))) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Unable to request mem region\n");
+		return -EBUSY;
+	}
+
+	sm_base = ioremap(A10_SYMAN_INTMASK_CLR, sizeof(u32));
+	if (!sm_base) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Unable to ioremap device\n");
+
+		ret = -ENOMEM;
+		goto release;
+	}
+
+	iowrite32(mask, sm_base);
+
+	iounmap(sm_base);
+
+release:
+	release_mem_region(A10_SYMAN_INTMASK_CLR, sizeof(u32));
+
+	return ret;
+}
+
+static int altr_sdram_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *id;
+	struct edac_mc_layer layers[2];
+	struct mem_ctl_info *mci;
+	struct altr_sdram_mc_data *drvdata;
+	const struct altr_sdram_prv_data *priv;
+	struct regmap *mc_vbase;
+	struct dimm_info *dimm;
+	u32 read_reg;
+	int irq, irq2, res = 0;
+	unsigned long mem_size, irqflags = 0;
+
+	id = of_match_device(altr_sdram_ctrl_of_match, &pdev->dev);
+	if (!id)
+		return -ENODEV;
+
+	/* Grab the register range from the sdr controller in device tree */
+	mc_vbase = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+						   "altr,sdr-syscon");
+	if (IS_ERR(mc_vbase)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "regmap for altr,sdr-syscon lookup failed.\n");
+		return -ENODEV;
+	}
+
+	/* Check specific dependencies for the module */
+	priv = of_match_node(altr_sdram_ctrl_of_match,
+			     pdev->dev.of_node)->data;
+
+	/* Validate the SDRAM controller has ECC enabled */
+	if (regmap_read(mc_vbase, priv->ecc_ctrl_offset, &read_reg) ||
+	    ((read_reg & priv->ecc_ctl_en_mask) != priv->ecc_ctl_en_mask)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "No ECC/ECC disabled [0x%08X]\n", read_reg);
+		return -ENODEV;
+	}
+
+	/* Grab memory size from device tree. */
+	mem_size = get_total_mem();
+	if (!mem_size) {
+		edac_printk(KERN_ERR, EDAC_MC, "Unable to calculate memory size\n");
+		return -ENODEV;
+	}
+
+	/* Ensure the SDRAM Interrupt is disabled */
+	if (regmap_update_bits(mc_vbase, priv->ecc_irq_en_offset,
+			       priv->ecc_irq_en_mask, 0)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Error disabling SDRAM ECC IRQ\n");
+		return -ENODEV;
+	}
+
+	/* Toggle to clear the SDRAM Error count */
+	if (regmap_update_bits(mc_vbase, priv->ecc_cnt_rst_offset,
+			       priv->ecc_cnt_rst_mask,
+			       priv->ecc_cnt_rst_mask)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Error clearing SDRAM ECC count\n");
+		return -ENODEV;
+	}
+
+	if (regmap_update_bits(mc_vbase, priv->ecc_cnt_rst_offset,
+			       priv->ecc_cnt_rst_mask, 0)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Error clearing SDRAM ECC count\n");
+		return -ENODEV;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "No irq %d in DT\n", irq);
+		return irq;
+	}
+
+	/* Arria10 has a 2nd IRQ */
+	irq2 = platform_get_irq(pdev, 1);
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = 1;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = 1;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
+			    sizeof(struct altr_sdram_mc_data));
+	if (!mci)
+		return -ENOMEM;
+
+	mci->pdev = &pdev->dev;
+	drvdata = mci->pvt_info;
+	drvdata->mc_vbase = mc_vbase;
+	drvdata->data = priv;
+	platform_set_drvdata(pdev, mci);
+
+	if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Unable to get managed device resource\n");
+		res = -ENOMEM;
+		goto free;
+	}
+
+	mci->mtype_cap = MEM_FLAG_DDR3;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->mod_name = EDAC_MOD_STR;
+	mci->ctl_name = dev_name(&pdev->dev);
+	mci->scrub_mode = SCRUB_SW_SRC;
+	mci->dev_name = dev_name(&pdev->dev);
+
+	dimm = *mci->dimms;
+	dimm->nr_pages = ((mem_size - 1) >> PAGE_SHIFT) + 1;
+	dimm->grain = 8;
+	dimm->dtype = DEV_X8;
+	dimm->mtype = MEM_DDR3;
+	dimm->edac_mode = EDAC_SECDED;
+
+	res = edac_mc_add_mc(mci);
+	if (res < 0)
+		goto err;
+
+	/* Only the Arria10 has separate IRQs */
+	if (irq2 > 0) {
+		/* Arria10 specific initialization */
+		res = a10_init(mc_vbase);
+		if (res < 0)
+			goto err2;
+
+		res = devm_request_irq(&pdev->dev, irq2,
+				       altr_sdram_mc_err_handler,
+				       IRQF_SHARED, dev_name(&pdev->dev), mci);
+		if (res < 0) {
+			edac_mc_printk(mci, KERN_ERR,
+				       "Unable to request irq %d\n", irq2);
+			res = -ENODEV;
+			goto err2;
+		}
+
+		res = a10_unmask_irq(pdev, A10_DDR0_IRQ_MASK);
+		if (res < 0)
+			goto err2;
+
+		irqflags = IRQF_SHARED;
+	}
+
+	res = devm_request_irq(&pdev->dev, irq, altr_sdram_mc_err_handler,
+			       irqflags, dev_name(&pdev->dev), mci);
+	if (res < 0) {
+		edac_mc_printk(mci, KERN_ERR,
+			       "Unable to request irq %d\n", irq);
+		res = -ENODEV;
+		goto err2;
+	}
+
+	/* Infrastructure ready - enable the IRQ */
+	if (regmap_update_bits(drvdata->mc_vbase, priv->ecc_irq_en_offset,
+			       priv->ecc_irq_en_mask, priv->ecc_irq_en_mask)) {
+		edac_mc_printk(mci, KERN_ERR,
+			       "Error enabling SDRAM ECC IRQ\n");
+		res = -ENODEV;
+		goto err2;
+	}
+
+	altr_sdr_mc_create_debugfs_nodes(mci);
+
+	devres_close_group(&pdev->dev, NULL);
+
+	return 0;
+
+err2:
+	edac_mc_del_mc(&pdev->dev);
+err:
+	devres_release_group(&pdev->dev, NULL);
+free:
+	edac_mc_free(mci);
+	edac_printk(KERN_ERR, EDAC_MC,
+		    "EDAC Probe Failed; Error %d\n", res);
+
+	return res;
+}
+
+static int altr_sdram_remove(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+	edac_mc_del_mc(&pdev->dev);
+	edac_mc_free(mci);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+/**************** Stratix 10 EDAC Memory Controller Functions ************/
+
+/**
+ * s10_protected_reg_write
+ * Write to a protected SMC register.
+ * @context: Not used.
+ * @reg: Address of register
+ * @value: Value to write
+ * Return: INTEL_SIP_SMC_STATUS_OK (0) on success
+ *	   INTEL_SIP_SMC_REG_ERROR on error
+ *	   INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION if not supported
+ */
+static int s10_protected_reg_write(void *context, unsigned int reg,
+				   unsigned int val)
+{
+	struct arm_smccc_res result;
+
+	arm_smccc_smc(INTEL_SIP_SMC_REG_WRITE, reg, val, 0, 0,
+		      0, 0, 0, &result);
+
+	return (int)result.a0;
+}
+
+/**
+ * s10_protected_reg_read
+ * Read the status of a protected SMC register
+ * @context: Not used.
+ * @reg: Address of register
+ * @value: Value read.
+ * Return: INTEL_SIP_SMC_STATUS_OK (0) on success
+ *	   INTEL_SIP_SMC_REG_ERROR on error
+ *	   INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION if not supported
+ */
+static int s10_protected_reg_read(void *context, unsigned int reg,
+				  unsigned int *val)
+{
+	struct arm_smccc_res result;
+
+	arm_smccc_smc(INTEL_SIP_SMC_REG_READ, reg, 0, 0, 0,
+		      0, 0, 0, &result);
+
+	*val = (unsigned int)result.a1;
+
+	return (int)result.a0;
+}
+
+static bool s10_sdram_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case S10_ECCCTRL1_OFST:
+	case S10_ERRINTEN_OFST:
+	case S10_INTMODE_OFST:
+	case S10_INTSTAT_OFST:
+	case S10_DIAGINTTEST_OFST:
+	case S10_SYSMGR_ECC_INTMASK_VAL_OFST:
+	case S10_SYSMGR_ECC_INTMASK_SET_OFST:
+	case S10_SYSMGR_ECC_INTMASK_CLR_OFST:
+		return true;
+	}
+	return false;
+}
+
+static bool s10_sdram_readable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case S10_ECCCTRL1_OFST:
+	case S10_ERRINTEN_OFST:
+	case S10_INTMODE_OFST:
+	case S10_INTSTAT_OFST:
+	case S10_DERRADDR_OFST:
+	case S10_SERRADDR_OFST:
+	case S10_DIAGINTTEST_OFST:
+	case S10_SYSMGR_ECC_INTMASK_VAL_OFST:
+	case S10_SYSMGR_ECC_INTMASK_SET_OFST:
+	case S10_SYSMGR_ECC_INTMASK_CLR_OFST:
+	case S10_SYSMGR_ECC_INTSTAT_SERR_OFST:
+	case S10_SYSMGR_ECC_INTSTAT_DERR_OFST:
+		return true;
+	}
+	return false;
+}
+
+static bool s10_sdram_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case S10_ECCCTRL1_OFST:
+	case S10_ERRINTEN_OFST:
+	case S10_INTMODE_OFST:
+	case S10_INTSTAT_OFST:
+	case S10_DERRADDR_OFST:
+	case S10_SERRADDR_OFST:
+	case S10_DIAGINTTEST_OFST:
+	case S10_SYSMGR_ECC_INTMASK_VAL_OFST:
+	case S10_SYSMGR_ECC_INTMASK_SET_OFST:
+	case S10_SYSMGR_ECC_INTMASK_CLR_OFST:
+	case S10_SYSMGR_ECC_INTSTAT_SERR_OFST:
+	case S10_SYSMGR_ECC_INTSTAT_DERR_OFST:
+		return true;
+	}
+	return false;
+}
+
+static const struct regmap_config s10_sdram_regmap_cfg = {
+	.name = "s10_ddr",
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = 0xffffffff,
+	.writeable_reg = s10_sdram_writeable_reg,
+	.readable_reg = s10_sdram_readable_reg,
+	.volatile_reg = s10_sdram_volatile_reg,
+	.reg_read = s10_protected_reg_read,
+	.reg_write = s10_protected_reg_write,
+	.use_single_rw = true,
+};
+
+static int altr_s10_sdram_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *id;
+	struct edac_mc_layer layers[2];
+	struct mem_ctl_info *mci;
+	struct altr_sdram_mc_data *drvdata;
+	const struct altr_sdram_prv_data *priv;
+	struct regmap *regmap;
+	struct dimm_info *dimm;
+	u32 read_reg;
+	int irq, ret = 0;
+	unsigned long mem_size;
+
+	id = of_match_device(altr_sdram_ctrl_of_match, &pdev->dev);
+	if (!id)
+		return -ENODEV;
+
+	/* Grab specific offsets and masks for Stratix10 */
+	priv = of_match_node(altr_sdram_ctrl_of_match,
+			     pdev->dev.of_node)->data;
+
+	regmap = devm_regmap_init(&pdev->dev, NULL, (void *)priv,
+				  &s10_sdram_regmap_cfg);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	/* Validate the SDRAM controller has ECC enabled */
+	if (regmap_read(regmap, priv->ecc_ctrl_offset, &read_reg) ||
+	    ((read_reg & priv->ecc_ctl_en_mask) != priv->ecc_ctl_en_mask)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "No ECC/ECC disabled [0x%08X]\n", read_reg);
+		return -ENODEV;
+	}
+
+	/* Grab memory size from device tree. */
+	mem_size = get_total_mem();
+	if (!mem_size) {
+		edac_printk(KERN_ERR, EDAC_MC, "Unable to calculate memory size\n");
+		return -ENODEV;
+	}
+
+	/* Ensure the SDRAM Interrupt is disabled */
+	if (regmap_update_bits(regmap, priv->ecc_irq_en_offset,
+			       priv->ecc_irq_en_mask, 0)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Error disabling SDRAM ECC IRQ\n");
+		return -ENODEV;
+	}
+
+	/* Toggle to clear the SDRAM Error count */
+	if (regmap_update_bits(regmap, priv->ecc_cnt_rst_offset,
+			       priv->ecc_cnt_rst_mask,
+			       priv->ecc_cnt_rst_mask)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Error clearing SDRAM ECC count\n");
+		return -ENODEV;
+	}
+
+	if (regmap_update_bits(regmap, priv->ecc_cnt_rst_offset,
+			       priv->ecc_cnt_rst_mask, 0)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Error clearing SDRAM ECC count\n");
+		return -ENODEV;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "No irq %d in DT\n", irq);
+		return -ENODEV;
+	}
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = 1;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = 1;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
+			    sizeof(struct altr_sdram_mc_data));
+	if (!mci)
+		return -ENOMEM;
+
+	mci->pdev = &pdev->dev;
+	drvdata = mci->pvt_info;
+	drvdata->mc_vbase = regmap;
+	drvdata->data = priv;
+	platform_set_drvdata(pdev, mci);
+
+	if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Unable to get managed device resource\n");
+		ret = -ENOMEM;
+		goto free;
+	}
+
+	mci->mtype_cap = MEM_FLAG_DDR3;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->mod_name = EDAC_MOD_STR;
+	mci->ctl_name = dev_name(&pdev->dev);
+	mci->scrub_mode = SCRUB_SW_SRC;
+	mci->dev_name = dev_name(&pdev->dev);
+
+	dimm = *mci->dimms;
+	dimm->nr_pages = ((mem_size - 1) >> PAGE_SHIFT) + 1;
+	dimm->grain = 8;
+	dimm->dtype = DEV_X8;
+	dimm->mtype = MEM_DDR3;
+	dimm->edac_mode = EDAC_SECDED;
+
+	ret = edac_mc_add_mc(mci);
+	if (ret < 0)
+		goto err;
+
+	ret = devm_request_irq(&pdev->dev, irq, altr_sdram_mc_err_handler,
+			       IRQF_SHARED, dev_name(&pdev->dev), mci);
+	if (ret < 0) {
+		edac_mc_printk(mci, KERN_ERR,
+			       "Unable to request irq %d\n", irq);
+		ret = -ENODEV;
+		goto err2;
+	}
+
+	if (regmap_write(regmap, S10_SYSMGR_ECC_INTMASK_CLR_OFST,
+			 S10_DDR0_IRQ_MASK)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Error clearing SDRAM ECC count\n");
+		ret = -ENODEV;
+		goto err2;
+	}
+
+	if (regmap_update_bits(drvdata->mc_vbase, priv->ecc_irq_en_offset,
+			       priv->ecc_irq_en_mask, priv->ecc_irq_en_mask)) {
+		edac_mc_printk(mci, KERN_ERR,
+			       "Error enabling SDRAM ECC IRQ\n");
+		ret = -ENODEV;
+		goto err2;
+	}
+
+	altr_sdr_mc_create_debugfs_nodes(mci);
+
+	devres_close_group(&pdev->dev, NULL);
+
+	return 0;
+
+err2:
+	edac_mc_del_mc(&pdev->dev);
+err:
+	devres_release_group(&pdev->dev, NULL);
+free:
+	edac_mc_free(mci);
+	edac_printk(KERN_ERR, EDAC_MC,
+		    "EDAC Probe Failed; Error %d\n", ret);
+
+	return ret;
+}
+
+static int altr_s10_sdram_remove(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+	edac_mc_del_mc(&pdev->dev);
+	edac_mc_free(mci);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+/************** </Stratix10 EDAC Memory Controller Functions> ***********/
+
+/*
+ * If you want to suspend, need to disable EDAC by removing it
+ * from the device tree or defconfig.
+ */
+#ifdef CONFIG_PM
+static int altr_sdram_prepare(struct device *dev)
+{
+	pr_err("Suspend not allowed when EDAC is enabled.\n");
+
+	return -EPERM;
+}
+
+static const struct dev_pm_ops altr_sdram_pm_ops = {
+	.prepare = altr_sdram_prepare,
+};
+#endif
+
+static struct platform_driver altr_sdram_edac_driver = {
+	.probe = altr_sdram_probe,
+	.remove = altr_sdram_remove,
+	.driver = {
+		.name = "altr_sdram_edac",
+#ifdef CONFIG_PM
+		.pm = &altr_sdram_pm_ops,
+#endif
+		.of_match_table = altr_sdram_ctrl_of_match,
+	},
+};
+
+module_platform_driver(altr_sdram_edac_driver);
+
+static struct platform_driver altr_s10_sdram_edac_driver = {
+	.probe = altr_s10_sdram_probe,
+	.remove = altr_s10_sdram_remove,
+	.driver = {
+		.name = "altr_s10_sdram_edac",
+#ifdef CONFIG_PM
+		.pm = &altr_sdram_pm_ops,
+#endif
+		.of_match_table = altr_sdram_ctrl_of_match,
+	},
+};
+
+module_platform_driver(altr_s10_sdram_edac_driver);
+
+/************************* EDAC Parent Probe *************************/
+
+static const struct of_device_id altr_edac_device_of_match[];
+
+static const struct of_device_id altr_edac_of_match[] = {
+	{ .compatible = "altr,socfpga-ecc-manager" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altr_edac_of_match);
+
+static int altr_edac_probe(struct platform_device *pdev)
+{
+	of_platform_populate(pdev->dev.of_node, altr_edac_device_of_match,
+			     NULL, &pdev->dev);
+	return 0;
+}
+
+static struct platform_driver altr_edac_driver = {
+	.probe =  altr_edac_probe,
+	.driver = {
+		.name = "socfpga_ecc_manager",
+		.of_match_table = altr_edac_of_match,
+	},
+};
+module_platform_driver(altr_edac_driver);
+
+/************************* EDAC Device Functions *************************/
+
+/*
+ * EDAC Device Functions (shared between various IPs).
+ * The discrete memories use the EDAC Device framework. The probe
+ * and error handling functions are very similar between memories
+ * so they are shared. The memory allocation and freeing for EDAC
+ * trigger testing are different for each memory.
+ */
+
+static const struct edac_device_prv_data ocramecc_data;
+static const struct edac_device_prv_data l2ecc_data;
+static const struct edac_device_prv_data a10_ocramecc_data;
+static const struct edac_device_prv_data a10_l2ecc_data;
+
+static irqreturn_t altr_edac_device_handler(int irq, void *dev_id)
+{
+	irqreturn_t ret_value = IRQ_NONE;
+	struct edac_device_ctl_info *dci = dev_id;
+	struct altr_edac_device_dev *drvdata = dci->pvt_info;
+	const struct edac_device_prv_data *priv = drvdata->data;
+
+	if (irq == drvdata->sb_irq) {
+		if (priv->ce_clear_mask)
+			writel(priv->ce_clear_mask, drvdata->base);
+		edac_device_handle_ce(dci, 0, 0, drvdata->edac_dev_name);
+		ret_value = IRQ_HANDLED;
+	} else if (irq == drvdata->db_irq) {
+		if (priv->ue_clear_mask)
+			writel(priv->ue_clear_mask, drvdata->base);
+		edac_device_handle_ue(dci, 0, 0, drvdata->edac_dev_name);
+		panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n");
+		ret_value = IRQ_HANDLED;
+	} else {
+		WARN_ON(1);
+	}
+
+	return ret_value;
+}
+
+static ssize_t altr_edac_device_trig(struct file *file,
+				     const char __user *user_buf,
+				     size_t count, loff_t *ppos)
+
+{
+	u32 *ptemp, i, error_mask;
+	int result = 0;
+	u8 trig_type;
+	unsigned long flags;
+	struct edac_device_ctl_info *edac_dci = file->private_data;
+	struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
+	const struct edac_device_prv_data *priv = drvdata->data;
+	void *generic_ptr = edac_dci->dev;
+
+	if (!user_buf || get_user(trig_type, user_buf))
+		return -EFAULT;
+
+	if (!priv->alloc_mem)
+		return -ENOMEM;
+
+	/*
+	 * Note that generic_ptr is initialized to the device * but in
+	 * some alloc_functions, this is overridden and returns data.
+	 */
+	ptemp = priv->alloc_mem(priv->trig_alloc_sz, &generic_ptr);
+	if (!ptemp) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Inject: Buffer Allocation error\n");
+		return -ENOMEM;
+	}
+
+	if (trig_type == ALTR_UE_TRIGGER_CHAR)
+		error_mask = priv->ue_set_mask;
+	else
+		error_mask = priv->ce_set_mask;
+
+	edac_printk(KERN_ALERT, EDAC_DEVICE,
+		    "Trigger Error Mask (0x%X)\n", error_mask);
+
+	local_irq_save(flags);
+	/* write ECC corrupted data out. */
+	for (i = 0; i < (priv->trig_alloc_sz / sizeof(*ptemp)); i++) {
+		/* Read data so we're in the correct state */
+		rmb();
+		if (READ_ONCE(ptemp[i]))
+			result = -1;
+		/* Toggle Error bit (it is latched), leave ECC enabled */
+		writel(error_mask, (drvdata->base + priv->set_err_ofst));
+		writel(priv->ecc_enable_mask, (drvdata->base +
+					       priv->set_err_ofst));
+		ptemp[i] = i;
+	}
+	/* Ensure it has been written out */
+	wmb();
+	local_irq_restore(flags);
+
+	if (result)
+		edac_printk(KERN_ERR, EDAC_DEVICE, "Mem Not Cleared\n");
+
+	/* Read out written data. ECC error caused here */
+	for (i = 0; i < ALTR_TRIGGER_READ_WRD_CNT; i++)
+		if (READ_ONCE(ptemp[i]) != i)
+			edac_printk(KERN_ERR, EDAC_DEVICE,
+				    "Read doesn't match written data\n");
+
+	if (priv->free_mem)
+		priv->free_mem(ptemp, priv->trig_alloc_sz, generic_ptr);
+
+	return count;
+}
+
+static const struct file_operations altr_edac_device_inject_fops = {
+	.open = simple_open,
+	.write = altr_edac_device_trig,
+	.llseek = generic_file_llseek,
+};
+
+static ssize_t altr_edac_a10_device_trig(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos);
+
+static const struct file_operations altr_edac_a10_device_inject_fops = {
+	.open = simple_open,
+	.write = altr_edac_a10_device_trig,
+	.llseek = generic_file_llseek,
+};
+
+static void altr_create_edacdev_dbgfs(struct edac_device_ctl_info *edac_dci,
+				      const struct edac_device_prv_data *priv)
+{
+	struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
+
+	if (!IS_ENABLED(CONFIG_EDAC_DEBUG))
+		return;
+
+	drvdata->debugfs_dir = edac_debugfs_create_dir(drvdata->edac_dev_name);
+	if (!drvdata->debugfs_dir)
+		return;
+
+	if (!edac_debugfs_create_file("altr_trigger", S_IWUSR,
+				      drvdata->debugfs_dir, edac_dci,
+				      priv->inject_fops))
+		debugfs_remove_recursive(drvdata->debugfs_dir);
+}
+
+static const struct of_device_id altr_edac_device_of_match[] = {
+#ifdef CONFIG_EDAC_ALTERA_L2C
+	{ .compatible = "altr,socfpga-l2-ecc", .data = &l2ecc_data },
+#endif
+#ifdef CONFIG_EDAC_ALTERA_OCRAM
+	{ .compatible = "altr,socfpga-ocram-ecc", .data = &ocramecc_data },
+#endif
+	{},
+};
+MODULE_DEVICE_TABLE(of, altr_edac_device_of_match);
+
+/*
+ * altr_edac_device_probe()
+ *	This is a generic EDAC device driver that will support
+ *	various Altera memory devices such as the L2 cache ECC and
+ *	OCRAM ECC as well as the memories for other peripherals.
+ *	Module specific initialization is done by passing the
+ *	function index in the device tree.
+ */
+static int altr_edac_device_probe(struct platform_device *pdev)
+{
+	struct edac_device_ctl_info *dci;
+	struct altr_edac_device_dev *drvdata;
+	struct resource *r;
+	int res = 0;
+	struct device_node *np = pdev->dev.of_node;
+	char *ecc_name = (char *)np->name;
+	static int dev_instance;
+
+	if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Unable to open devm\n");
+		return -ENOMEM;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Unable to get mem resource\n");
+		res = -ENODEV;
+		goto fail;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev, r->start, resource_size(r),
+				     dev_name(&pdev->dev))) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "%s:Error requesting mem region\n", ecc_name);
+		res = -EBUSY;
+		goto fail;
+	}
+
+	dci = edac_device_alloc_ctl_info(sizeof(*drvdata), ecc_name,
+					 1, ecc_name, 1, 0, NULL, 0,
+					 dev_instance++);
+
+	if (!dci) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "%s: Unable to allocate EDAC device\n", ecc_name);
+		res = -ENOMEM;
+		goto fail;
+	}
+
+	drvdata = dci->pvt_info;
+	dci->dev = &pdev->dev;
+	platform_set_drvdata(pdev, dci);
+	drvdata->edac_dev_name = ecc_name;
+
+	drvdata->base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+	if (!drvdata->base) {
+		res = -ENOMEM;
+		goto fail1;
+	}
+
+	/* Get driver specific data for this EDAC device */
+	drvdata->data = of_match_node(altr_edac_device_of_match, np)->data;
+
+	/* Check specific dependencies for the module */
+	if (drvdata->data->setup) {
+		res = drvdata->data->setup(drvdata);
+		if (res)
+			goto fail1;
+	}
+
+	drvdata->sb_irq = platform_get_irq(pdev, 0);
+	res = devm_request_irq(&pdev->dev, drvdata->sb_irq,
+			       altr_edac_device_handler,
+			       0, dev_name(&pdev->dev), dci);
+	if (res)
+		goto fail1;
+
+	drvdata->db_irq = platform_get_irq(pdev, 1);
+	res = devm_request_irq(&pdev->dev, drvdata->db_irq,
+			       altr_edac_device_handler,
+			       0, dev_name(&pdev->dev), dci);
+	if (res)
+		goto fail1;
+
+	dci->mod_name = "Altera ECC Manager";
+	dci->dev_name = drvdata->edac_dev_name;
+
+	res = edac_device_add_device(dci);
+	if (res)
+		goto fail1;
+
+	altr_create_edacdev_dbgfs(dci, drvdata->data);
+
+	devres_close_group(&pdev->dev, NULL);
+
+	return 0;
+
+fail1:
+	edac_device_free_ctl_info(dci);
+fail:
+	devres_release_group(&pdev->dev, NULL);
+	edac_printk(KERN_ERR, EDAC_DEVICE,
+		    "%s:Error setting up EDAC device: %d\n", ecc_name, res);
+
+	return res;
+}
+
+static int altr_edac_device_remove(struct platform_device *pdev)
+{
+	struct edac_device_ctl_info *dci = platform_get_drvdata(pdev);
+	struct altr_edac_device_dev *drvdata = dci->pvt_info;
+
+	debugfs_remove_recursive(drvdata->debugfs_dir);
+	edac_device_del_device(&pdev->dev);
+	edac_device_free_ctl_info(dci);
+
+	return 0;
+}
+
+static struct platform_driver altr_edac_device_driver = {
+	.probe =  altr_edac_device_probe,
+	.remove = altr_edac_device_remove,
+	.driver = {
+		.name = "altr_edac_device",
+		.of_match_table = altr_edac_device_of_match,
+	},
+};
+module_platform_driver(altr_edac_device_driver);
+
+/******************* Arria10 Device ECC Shared Functions *****************/
+
+/*
+ *  Test for memory's ECC dependencies upon entry because platform specific
+ *  startup should have initialized the memory and enabled the ECC.
+ *  Can't turn on ECC here because accessing un-initialized memory will
+ *  cause CE/UE errors possibly causing an ABORT.
+ */
+static int __maybe_unused
+altr_check_ecc_deps(struct altr_edac_device_dev *device)
+{
+	void __iomem  *base = device->base;
+	const struct edac_device_prv_data *prv = device->data;
+
+	if (readl(base + prv->ecc_en_ofst) & prv->ecc_enable_mask)
+		return 0;
+
+	edac_printk(KERN_ERR, EDAC_DEVICE,
+		    "%s: No ECC present or ECC disabled.\n",
+		    device->edac_dev_name);
+	return -ENODEV;
+}
+
+static irqreturn_t __maybe_unused altr_edac_a10_ecc_irq(int irq, void *dev_id)
+{
+	struct altr_edac_device_dev *dci = dev_id;
+	void __iomem  *base = dci->base;
+
+	if (irq == dci->sb_irq) {
+		writel(ALTR_A10_ECC_SERRPENA,
+		       base + ALTR_A10_ECC_INTSTAT_OFST);
+		edac_device_handle_ce(dci->edac_dev, 0, 0, dci->edac_dev_name);
+
+		return IRQ_HANDLED;
+	} else if (irq == dci->db_irq) {
+		writel(ALTR_A10_ECC_DERRPENA,
+		       base + ALTR_A10_ECC_INTSTAT_OFST);
+		edac_device_handle_ue(dci->edac_dev, 0, 0, dci->edac_dev_name);
+		if (dci->data->panic)
+			panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n");
+
+		return IRQ_HANDLED;
+	}
+
+	WARN_ON(1);
+
+	return IRQ_NONE;
+}
+
+/******************* Arria10 Memory Buffer Functions *********************/
+
+static inline int a10_get_irq_mask(struct device_node *np)
+{
+	int irq;
+	const u32 *handle = of_get_property(np, "interrupts", NULL);
+
+	if (!handle)
+		return -ENODEV;
+	irq = be32_to_cpup(handle);
+	return irq;
+}
+
+static inline void ecc_set_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	value |= bit_mask;
+	writel(value, ioaddr);
+}
+
+static inline void ecc_clear_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	value &= ~bit_mask;
+	writel(value, ioaddr);
+}
+
+static inline int ecc_test_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	return (value & bit_mask) ? 1 : 0;
+}
+
+/*
+ * This function uses the memory initialization block in the Arria10 ECC
+ * controller to initialize/clear the entire memory data and ECC data.
+ */
+static int __maybe_unused altr_init_memory_port(void __iomem *ioaddr, int port)
+{
+	int limit = ALTR_A10_ECC_INIT_WATCHDOG_10US;
+	u32 init_mask, stat_mask, clear_mask;
+	int ret = 0;
+
+	if (port) {
+		init_mask = ALTR_A10_ECC_INITB;
+		stat_mask = ALTR_A10_ECC_INITCOMPLETEB;
+		clear_mask = ALTR_A10_ECC_ERRPENB_MASK;
+	} else {
+		init_mask = ALTR_A10_ECC_INITA;
+		stat_mask = ALTR_A10_ECC_INITCOMPLETEA;
+		clear_mask = ALTR_A10_ECC_ERRPENA_MASK;
+	}
+
+	ecc_set_bits(init_mask, (ioaddr + ALTR_A10_ECC_CTRL_OFST));
+	while (limit--) {
+		if (ecc_test_bits(stat_mask,
+				  (ioaddr + ALTR_A10_ECC_INITSTAT_OFST)))
+			break;
+		udelay(1);
+	}
+	if (limit < 0)
+		ret = -EBUSY;
+
+	/* Clear any pending ECC interrupts */
+	writel(clear_mask, (ioaddr + ALTR_A10_ECC_INTSTAT_OFST));
+
+	return ret;
+}
+
+static __init int __maybe_unused
+altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
+			u32 ecc_ctrl_en_mask, bool dual_port)
+{
+	int ret = 0;
+	void __iomem *ecc_block_base;
+	struct regmap *ecc_mgr_map;
+	char *ecc_name;
+	struct device_node *np_eccmgr;
+
+	ecc_name = (char *)np->name;
+
+	/* Get the ECC Manager - parent of the device EDACs */
+	np_eccmgr = of_get_parent(np);
+	ecc_mgr_map = syscon_regmap_lookup_by_phandle(np_eccmgr,
+						      "altr,sysmgr-syscon");
+	of_node_put(np_eccmgr);
+	if (IS_ERR(ecc_mgr_map)) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Unable to get syscon altr,sysmgr-syscon\n");
+		return -ENODEV;
+	}
+
+	/* Map the ECC Block */
+	ecc_block_base = of_iomap(np, 0);
+	if (!ecc_block_base) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Unable to map %s ECC block\n", ecc_name);
+		return -ENODEV;
+	}
+
+	/* Disable ECC */
+	regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_SET_OFST, irq_mask);
+	writel(ALTR_A10_ECC_SERRINTEN,
+	       (ecc_block_base + ALTR_A10_ECC_ERRINTENR_OFST));
+	ecc_clear_bits(ecc_ctrl_en_mask,
+		       (ecc_block_base + ALTR_A10_ECC_CTRL_OFST));
+	/* Ensure all writes complete */
+	wmb();
+	/* Use HW initialization block to initialize memory for ECC */
+	ret = altr_init_memory_port(ecc_block_base, 0);
+	if (ret) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "ECC: cannot init %s PORTA memory\n", ecc_name);
+		goto out;
+	}
+
+	if (dual_port) {
+		ret = altr_init_memory_port(ecc_block_base, 1);
+		if (ret) {
+			edac_printk(KERN_ERR, EDAC_DEVICE,
+				    "ECC: cannot init %s PORTB memory\n",
+				    ecc_name);
+			goto out;
+		}
+	}
+
+	/* Interrupt mode set to every SBERR */
+	regmap_write(ecc_mgr_map, ALTR_A10_ECC_INTMODE_OFST,
+		     ALTR_A10_ECC_INTMODE);
+	/* Enable ECC */
+	ecc_set_bits(ecc_ctrl_en_mask, (ecc_block_base +
+					ALTR_A10_ECC_CTRL_OFST));
+	writel(ALTR_A10_ECC_SERRINTEN,
+	       (ecc_block_base + ALTR_A10_ECC_ERRINTENS_OFST));
+	regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_CLR_OFST, irq_mask);
+	/* Ensure all writes complete */
+	wmb();
+out:
+	iounmap(ecc_block_base);
+	return ret;
+}
+
+static int socfpga_is_a10(void)
+{
+	return of_machine_is_compatible("altr,socfpga-arria10");
+}
+
+static int validate_parent_available(struct device_node *np);
+static const struct of_device_id altr_edac_a10_device_of_match[];
+static int __init __maybe_unused altr_init_a10_ecc_device_type(char *compat)
+{
+	int irq;
+	struct device_node *child, *np;
+
+	if (!socfpga_is_a10())
+		return -ENODEV;
+
+	np = of_find_compatible_node(NULL, NULL,
+				     "altr,socfpga-a10-ecc-manager");
+	if (!np) {
+		edac_printk(KERN_ERR, EDAC_DEVICE, "ECC Manager not found\n");
+		return -ENODEV;
+	}
+
+	for_each_child_of_node(np, child) {
+		const struct of_device_id *pdev_id;
+		const struct edac_device_prv_data *prv;
+
+		if (!of_device_is_available(child))
+			continue;
+		if (!of_device_is_compatible(child, compat))
+			continue;
+
+		if (validate_parent_available(child))
+			continue;
+
+		irq = a10_get_irq_mask(child);
+		if (irq < 0)
+			continue;
+
+		/* Get matching node and check for valid result */
+		pdev_id = of_match_node(altr_edac_a10_device_of_match, child);
+		if (IS_ERR_OR_NULL(pdev_id))
+			continue;
+
+		/* Validate private data pointer before dereferencing */
+		prv = pdev_id->data;
+		if (!prv)
+			continue;
+
+		altr_init_a10_ecc_block(child, BIT(irq),
+					prv->ecc_enable_mask, 0);
+	}
+
+	of_node_put(np);
+	return 0;
+}
+
+/*********************** OCRAM EDAC Device Functions *********************/
+
+#ifdef CONFIG_EDAC_ALTERA_OCRAM
+
+static void *ocram_alloc_mem(size_t size, void **other)
+{
+	struct device_node *np;
+	struct gen_pool *gp;
+	void *sram_addr;
+
+	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-ocram-ecc");
+	if (!np)
+		return NULL;
+
+	gp = of_gen_pool_get(np, "iram", 0);
+	of_node_put(np);
+	if (!gp)
+		return NULL;
+
+	sram_addr = (void *)gen_pool_alloc(gp, size);
+	if (!sram_addr)
+		return NULL;
+
+	memset(sram_addr, 0, size);
+	/* Ensure data is written out */
+	wmb();
+
+	/* Remember this handle for freeing  later */
+	*other = gp;
+
+	return sram_addr;
+}
+
+static void ocram_free_mem(void *p, size_t size, void *other)
+{
+	gen_pool_free((struct gen_pool *)other, (unsigned long)p, size);
+}
+
+static const struct edac_device_prv_data ocramecc_data = {
+	.setup = altr_check_ecc_deps,
+	.ce_clear_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_SERR),
+	.ue_clear_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_DERR),
+	.alloc_mem = ocram_alloc_mem,
+	.free_mem = ocram_free_mem,
+	.ecc_enable_mask = ALTR_OCR_ECC_EN,
+	.ecc_en_ofst = ALTR_OCR_ECC_REG_OFFSET,
+	.ce_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJS),
+	.ue_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJD),
+	.set_err_ofst = ALTR_OCR_ECC_REG_OFFSET,
+	.trig_alloc_sz = ALTR_TRIG_OCRAM_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
+};
+
+static const struct edac_device_prv_data a10_ocramecc_data = {
+	.setup = altr_check_ecc_deps,
+	.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
+	.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
+	.irq_status_mask = A10_SYSMGR_ECC_INTSTAT_OCRAM,
+	.ecc_enable_mask = ALTR_A10_OCRAM_ECC_EN_CTL,
+	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+	.ce_set_mask = ALTR_A10_ECC_TSERRA,
+	.ue_set_mask = ALTR_A10_ECC_TDERRA,
+	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq,
+	.inject_fops = &altr_edac_a10_device_inject_fops,
+	/*
+	 * OCRAM panic on uncorrectable error because sleep/resume
+	 * functions and FPGA contents are stored in OCRAM. Prefer
+	 * a kernel panic over executing/loading corrupted data.
+	 */
+	.panic = true,
+};
+
+#endif	/* CONFIG_EDAC_ALTERA_OCRAM */
+
+/********************* L2 Cache EDAC Device Functions ********************/
+
+#ifdef CONFIG_EDAC_ALTERA_L2C
+
+static void *l2_alloc_mem(size_t size, void **other)
+{
+	struct device *dev = *other;
+	void *ptemp = devm_kzalloc(dev, size, GFP_KERNEL);
+
+	if (!ptemp)
+		return NULL;
+
+	/* Make sure everything is written out */
+	wmb();
+
+	/*
+	 * Clean all cache levels up to LoC (includes L2)
+	 * This ensures the corrupted data is written into
+	 * L2 cache for readback test (which causes ECC error).
+	 */
+	flush_cache_all();
+
+	return ptemp;
+}
+
+static void l2_free_mem(void *p, size_t size, void *other)
+{
+	struct device *dev = other;
+
+	if (dev && p)
+		devm_kfree(dev, p);
+}
+
+/*
+ * altr_l2_check_deps()
+ *	Test for L2 cache ECC dependencies upon entry because
+ *	platform specific startup should have initialized the L2
+ *	memory and enabled the ECC.
+ *	Bail if ECC is not enabled.
+ *	Note that L2 Cache Enable is forced at build time.
+ */
+static int altr_l2_check_deps(struct altr_edac_device_dev *device)
+{
+	void __iomem *base = device->base;
+	const struct edac_device_prv_data *prv = device->data;
+
+	if ((readl(base) & prv->ecc_enable_mask) ==
+	     prv->ecc_enable_mask)
+		return 0;
+
+	edac_printk(KERN_ERR, EDAC_DEVICE,
+		    "L2: No ECC present, or ECC disabled\n");
+	return -ENODEV;
+}
+
+static irqreturn_t altr_edac_a10_l2_irq(int irq, void *dev_id)
+{
+	struct altr_edac_device_dev *dci = dev_id;
+
+	if (irq == dci->sb_irq) {
+		regmap_write(dci->edac->ecc_mgr_map,
+			     A10_SYSGMR_MPU_CLEAR_L2_ECC_OFST,
+			     A10_SYSGMR_MPU_CLEAR_L2_ECC_SB);
+		edac_device_handle_ce(dci->edac_dev, 0, 0, dci->edac_dev_name);
+
+		return IRQ_HANDLED;
+	} else if (irq == dci->db_irq) {
+		regmap_write(dci->edac->ecc_mgr_map,
+			     A10_SYSGMR_MPU_CLEAR_L2_ECC_OFST,
+			     A10_SYSGMR_MPU_CLEAR_L2_ECC_MB);
+		edac_device_handle_ue(dci->edac_dev, 0, 0, dci->edac_dev_name);
+		panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n");
+
+		return IRQ_HANDLED;
+	}
+
+	WARN_ON(1);
+
+	return IRQ_NONE;
+}
+
+static const struct edac_device_prv_data l2ecc_data = {
+	.setup = altr_l2_check_deps,
+	.ce_clear_mask = 0,
+	.ue_clear_mask = 0,
+	.alloc_mem = l2_alloc_mem,
+	.free_mem = l2_free_mem,
+	.ecc_enable_mask = ALTR_L2_ECC_EN,
+	.ce_set_mask = (ALTR_L2_ECC_EN | ALTR_L2_ECC_INJS),
+	.ue_set_mask = (ALTR_L2_ECC_EN | ALTR_L2_ECC_INJD),
+	.set_err_ofst = ALTR_L2_ECC_REG_OFFSET,
+	.trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
+};
+
+static const struct edac_device_prv_data a10_l2ecc_data = {
+	.setup = altr_l2_check_deps,
+	.ce_clear_mask = ALTR_A10_L2_ECC_SERR_CLR,
+	.ue_clear_mask = ALTR_A10_L2_ECC_MERR_CLR,
+	.irq_status_mask = A10_SYSMGR_ECC_INTSTAT_L2,
+	.alloc_mem = l2_alloc_mem,
+	.free_mem = l2_free_mem,
+	.ecc_enable_mask = ALTR_A10_L2_ECC_EN_CTL,
+	.ce_set_mask = ALTR_A10_L2_ECC_CE_INJ_MASK,
+	.ue_set_mask = ALTR_A10_L2_ECC_UE_INJ_MASK,
+	.set_err_ofst = ALTR_A10_L2_ECC_INJ_OFST,
+	.ecc_irq_handler = altr_edac_a10_l2_irq,
+	.trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
+};
+
+#endif	/* CONFIG_EDAC_ALTERA_L2C */
+
+/********************* Ethernet Device Functions ********************/
+
+#ifdef CONFIG_EDAC_ALTERA_ETHERNET
+
+static const struct edac_device_prv_data a10_enetecc_data = {
+	.setup = altr_check_ecc_deps,
+	.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
+	.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
+	.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
+	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+	.ce_set_mask = ALTR_A10_ECC_TSERRA,
+	.ue_set_mask = ALTR_A10_ECC_TDERRA,
+	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq,
+	.inject_fops = &altr_edac_a10_device_inject_fops,
+};
+
+static int __init socfpga_init_ethernet_ecc(void)
+{
+	return altr_init_a10_ecc_device_type("altr,socfpga-eth-mac-ecc");
+}
+
+early_initcall(socfpga_init_ethernet_ecc);
+
+#endif	/* CONFIG_EDAC_ALTERA_ETHERNET */
+
+/********************** NAND Device Functions **********************/
+
+#ifdef CONFIG_EDAC_ALTERA_NAND
+
+static const struct edac_device_prv_data a10_nandecc_data = {
+	.setup = altr_check_ecc_deps,
+	.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
+	.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
+	.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
+	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+	.ce_set_mask = ALTR_A10_ECC_TSERRA,
+	.ue_set_mask = ALTR_A10_ECC_TDERRA,
+	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq,
+	.inject_fops = &altr_edac_a10_device_inject_fops,
+};
+
+static int __init socfpga_init_nand_ecc(void)
+{
+	return altr_init_a10_ecc_device_type("altr,socfpga-nand-ecc");
+}
+
+early_initcall(socfpga_init_nand_ecc);
+
+#endif	/* CONFIG_EDAC_ALTERA_NAND */
+
+/********************** DMA Device Functions **********************/
+
+#ifdef CONFIG_EDAC_ALTERA_DMA
+
+static const struct edac_device_prv_data a10_dmaecc_data = {
+	.setup = altr_check_ecc_deps,
+	.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
+	.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
+	.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
+	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+	.ce_set_mask = ALTR_A10_ECC_TSERRA,
+	.ue_set_mask = ALTR_A10_ECC_TDERRA,
+	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq,
+	.inject_fops = &altr_edac_a10_device_inject_fops,
+};
+
+static int __init socfpga_init_dma_ecc(void)
+{
+	return altr_init_a10_ecc_device_type("altr,socfpga-dma-ecc");
+}
+
+early_initcall(socfpga_init_dma_ecc);
+
+#endif	/* CONFIG_EDAC_ALTERA_DMA */
+
+/********************** USB Device Functions **********************/
+
+#ifdef CONFIG_EDAC_ALTERA_USB
+
+static const struct edac_device_prv_data a10_usbecc_data = {
+	.setup = altr_check_ecc_deps,
+	.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
+	.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
+	.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
+	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+	.ce_set_mask = ALTR_A10_ECC_TSERRA,
+	.ue_set_mask = ALTR_A10_ECC_TDERRA,
+	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq,
+	.inject_fops = &altr_edac_a10_device_inject_fops,
+};
+
+static int __init socfpga_init_usb_ecc(void)
+{
+	return altr_init_a10_ecc_device_type("altr,socfpga-usb-ecc");
+}
+
+early_initcall(socfpga_init_usb_ecc);
+
+#endif	/* CONFIG_EDAC_ALTERA_USB */
+
+/********************** QSPI Device Functions **********************/
+
+#ifdef CONFIG_EDAC_ALTERA_QSPI
+
+static const struct edac_device_prv_data a10_qspiecc_data = {
+	.setup = altr_check_ecc_deps,
+	.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
+	.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
+	.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
+	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+	.ce_set_mask = ALTR_A10_ECC_TSERRA,
+	.ue_set_mask = ALTR_A10_ECC_TDERRA,
+	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq,
+	.inject_fops = &altr_edac_a10_device_inject_fops,
+};
+
+static int __init socfpga_init_qspi_ecc(void)
+{
+	return altr_init_a10_ecc_device_type("altr,socfpga-qspi-ecc");
+}
+
+early_initcall(socfpga_init_qspi_ecc);
+
+#endif	/* CONFIG_EDAC_ALTERA_QSPI */
+
+/********************* SDMMC Device Functions **********************/
+
+#ifdef CONFIG_EDAC_ALTERA_SDMMC
+
+static const struct edac_device_prv_data a10_sdmmceccb_data;
+static int altr_portb_setup(struct altr_edac_device_dev *device)
+{
+	struct edac_device_ctl_info *dci;
+	struct altr_edac_device_dev *altdev;
+	char *ecc_name = "sdmmcb-ecc";
+	int edac_idx, rc;
+	struct device_node *np;
+	const struct edac_device_prv_data *prv = &a10_sdmmceccb_data;
+
+	rc = altr_check_ecc_deps(device);
+	if (rc)
+		return rc;
+
+	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-sdmmc-ecc");
+	if (!np) {
+		edac_printk(KERN_WARNING, EDAC_DEVICE, "SDMMC node not found\n");
+		return -ENODEV;
+	}
+
+	/* Create the PortB EDAC device */
+	edac_idx = edac_device_alloc_index();
+	dci = edac_device_alloc_ctl_info(sizeof(*altdev), ecc_name, 1,
+					 ecc_name, 1, 0, NULL, 0, edac_idx);
+	if (!dci) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "%s: Unable to allocate PortB EDAC device\n",
+			    ecc_name);
+		return -ENOMEM;
+	}
+
+	/* Initialize the PortB EDAC device structure from PortA structure */
+	altdev = dci->pvt_info;
+	*altdev = *device;
+
+	if (!devres_open_group(&altdev->ddev, altr_portb_setup, GFP_KERNEL))
+		return -ENOMEM;
+
+	/* Update PortB specific values */
+	altdev->edac_dev_name = ecc_name;
+	altdev->edac_idx = edac_idx;
+	altdev->edac_dev = dci;
+	altdev->data = prv;
+	dci->dev = &altdev->ddev;
+	dci->ctl_name = "Altera ECC Manager";
+	dci->mod_name = ecc_name;
+	dci->dev_name = ecc_name;
+
+	/* Update the IRQs for PortB */
+	altdev->sb_irq = irq_of_parse_and_map(np, 2);
+	if (!altdev->sb_irq) {
+		edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB SBIRQ alloc\n");
+		rc = -ENODEV;
+		goto err_release_group_1;
+	}
+	rc = devm_request_irq(&altdev->ddev, altdev->sb_irq,
+			      prv->ecc_irq_handler,
+			      IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+			      ecc_name, altdev);
+	if (rc) {
+		edac_printk(KERN_ERR, EDAC_DEVICE, "PortB SBERR IRQ error\n");
+		goto err_release_group_1;
+	}
+
+	altdev->db_irq = irq_of_parse_and_map(np, 3);
+	if (!altdev->db_irq) {
+		edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB DBIRQ alloc\n");
+		rc = -ENODEV;
+		goto err_release_group_1;
+	}
+	rc = devm_request_irq(&altdev->ddev, altdev->db_irq,
+			      prv->ecc_irq_handler,
+			      IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+			      ecc_name, altdev);
+	if (rc) {
+		edac_printk(KERN_ERR, EDAC_DEVICE, "PortB DBERR IRQ error\n");
+		goto err_release_group_1;
+	}
+
+	rc = edac_device_add_device(dci);
+	if (rc) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "edac_device_add_device portB failed\n");
+		rc = -ENOMEM;
+		goto err_release_group_1;
+	}
+	altr_create_edacdev_dbgfs(dci, prv);
+
+	list_add(&altdev->next, &altdev->edac->a10_ecc_devices);
+
+	devres_remove_group(&altdev->ddev, altr_portb_setup);
+
+	return 0;
+
+err_release_group_1:
+	edac_device_free_ctl_info(dci);
+	devres_release_group(&altdev->ddev, altr_portb_setup);
+	edac_printk(KERN_ERR, EDAC_DEVICE,
+		    "%s:Error setting up EDAC device: %d\n", ecc_name, rc);
+	return rc;
+}
+
+static irqreturn_t altr_edac_a10_ecc_irq_portb(int irq, void *dev_id)
+{
+	struct altr_edac_device_dev *ad = dev_id;
+	void __iomem  *base = ad->base;
+	const struct edac_device_prv_data *priv = ad->data;
+
+	if (irq == ad->sb_irq) {
+		writel(priv->ce_clear_mask,
+		       base + ALTR_A10_ECC_INTSTAT_OFST);
+		edac_device_handle_ce(ad->edac_dev, 0, 0, ad->edac_dev_name);
+		return IRQ_HANDLED;
+	} else if (irq == ad->db_irq) {
+		writel(priv->ue_clear_mask,
+		       base + ALTR_A10_ECC_INTSTAT_OFST);
+		edac_device_handle_ue(ad->edac_dev, 0, 0, ad->edac_dev_name);
+		return IRQ_HANDLED;
+	}
+
+	WARN_ONCE(1, "Unhandled IRQ%d on Port B.", irq);
+
+	return IRQ_NONE;
+}
+
+static const struct edac_device_prv_data a10_sdmmcecca_data = {
+	.setup = altr_portb_setup,
+	.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
+	.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
+	.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
+	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+	.ce_set_mask = ALTR_A10_ECC_SERRPENA,
+	.ue_set_mask = ALTR_A10_ECC_DERRPENA,
+	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq,
+	.inject_fops = &altr_edac_a10_device_inject_fops,
+};
+
+static const struct edac_device_prv_data a10_sdmmceccb_data = {
+	.setup = altr_portb_setup,
+	.ce_clear_mask = ALTR_A10_ECC_SERRPENB,
+	.ue_clear_mask = ALTR_A10_ECC_DERRPENB,
+	.ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
+	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+	.ce_set_mask = ALTR_A10_ECC_TSERRB,
+	.ue_set_mask = ALTR_A10_ECC_TDERRB,
+	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq_portb,
+	.inject_fops = &altr_edac_a10_device_inject_fops,
+};
+
+static int __init socfpga_init_sdmmc_ecc(void)
+{
+	int rc = -ENODEV;
+	struct device_node *child;
+
+	if (!socfpga_is_a10())
+		return -ENODEV;
+
+	child = of_find_compatible_node(NULL, NULL, "altr,socfpga-sdmmc-ecc");
+	if (!child) {
+		edac_printk(KERN_WARNING, EDAC_DEVICE, "SDMMC node not found\n");
+		return -ENODEV;
+	}
+
+	if (!of_device_is_available(child))
+		goto exit;
+
+	if (validate_parent_available(child))
+		goto exit;
+
+	rc = altr_init_a10_ecc_block(child, ALTR_A10_SDMMC_IRQ_MASK,
+				     a10_sdmmcecca_data.ecc_enable_mask, 1);
+exit:
+	of_node_put(child);
+	return rc;
+}
+
+early_initcall(socfpga_init_sdmmc_ecc);
+
+#endif	/* CONFIG_EDAC_ALTERA_SDMMC */
+
+/********************* Arria10 EDAC Device Functions *************************/
+static const struct of_device_id altr_edac_a10_device_of_match[] = {
+#ifdef CONFIG_EDAC_ALTERA_L2C
+	{ .compatible = "altr,socfpga-a10-l2-ecc", .data = &a10_l2ecc_data },
+#endif
+#ifdef CONFIG_EDAC_ALTERA_OCRAM
+	{ .compatible = "altr,socfpga-a10-ocram-ecc",
+	  .data = &a10_ocramecc_data },
+#endif
+#ifdef CONFIG_EDAC_ALTERA_ETHERNET
+	{ .compatible = "altr,socfpga-eth-mac-ecc",
+	  .data = &a10_enetecc_data },
+#endif
+#ifdef CONFIG_EDAC_ALTERA_NAND
+	{ .compatible = "altr,socfpga-nand-ecc", .data = &a10_nandecc_data },
+#endif
+#ifdef CONFIG_EDAC_ALTERA_DMA
+	{ .compatible = "altr,socfpga-dma-ecc", .data = &a10_dmaecc_data },
+#endif
+#ifdef CONFIG_EDAC_ALTERA_USB
+	{ .compatible = "altr,socfpga-usb-ecc", .data = &a10_usbecc_data },
+#endif
+#ifdef CONFIG_EDAC_ALTERA_QSPI
+	{ .compatible = "altr,socfpga-qspi-ecc", .data = &a10_qspiecc_data },
+#endif
+#ifdef CONFIG_EDAC_ALTERA_SDMMC
+	{ .compatible = "altr,socfpga-sdmmc-ecc", .data = &a10_sdmmcecca_data },
+#endif
+	{},
+};
+MODULE_DEVICE_TABLE(of, altr_edac_a10_device_of_match);
+
+/*
+ * The Arria10 EDAC Device Functions differ from the Cyclone5/Arria5
+ * because 2 IRQs are shared among the all ECC peripherals. The ECC
+ * manager manages the IRQs and the children.
+ * Based on xgene_edac.c peripheral code.
+ */
+
+static ssize_t altr_edac_a10_device_trig(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct edac_device_ctl_info *edac_dci = file->private_data;
+	struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
+	const struct edac_device_prv_data *priv = drvdata->data;
+	void __iomem *set_addr = (drvdata->base + priv->set_err_ofst);
+	unsigned long flags;
+	u8 trig_type;
+
+	if (!user_buf || get_user(trig_type, user_buf))
+		return -EFAULT;
+
+	local_irq_save(flags);
+	if (trig_type == ALTR_UE_TRIGGER_CHAR)
+		writel(priv->ue_set_mask, set_addr);
+	else
+		writel(priv->ce_set_mask, set_addr);
+	/* Ensure the interrupt test bits are set */
+	wmb();
+	local_irq_restore(flags);
+
+	return count;
+}
+
+static void altr_edac_a10_irq_handler(struct irq_desc *desc)
+{
+	int dberr, bit, sm_offset, irq_status;
+	struct altr_arria10_edac *edac = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	int irq = irq_desc_get_irq(desc);
+	unsigned long bits;
+
+	dberr = (irq == edac->db_irq) ? 1 : 0;
+	sm_offset = dberr ? A10_SYSMGR_ECC_INTSTAT_DERR_OFST :
+			    A10_SYSMGR_ECC_INTSTAT_SERR_OFST;
+
+	chained_irq_enter(chip, desc);
+
+	regmap_read(edac->ecc_mgr_map, sm_offset, &irq_status);
+
+	bits = irq_status;
+	for_each_set_bit(bit, &bits, 32) {
+		irq = irq_linear_revmap(edac->domain, dberr * 32 + bit);
+		if (irq)
+			generic_handle_irq(irq);
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static int validate_parent_available(struct device_node *np)
+{
+	struct device_node *parent;
+	int ret = 0;
+
+	/* Ensure parent device is enabled if parent node exists */
+	parent = of_parse_phandle(np, "altr,ecc-parent", 0);
+	if (parent && !of_device_is_available(parent))
+		ret = -ENODEV;
+
+	of_node_put(parent);
+	return ret;
+}
+
+static int altr_edac_a10_device_add(struct altr_arria10_edac *edac,
+				    struct device_node *np)
+{
+	struct edac_device_ctl_info *dci;
+	struct altr_edac_device_dev *altdev;
+	char *ecc_name = (char *)np->name;
+	struct resource res;
+	int edac_idx;
+	int rc = 0;
+	const struct edac_device_prv_data *prv;
+	/* Get matching node and check for valid result */
+	const struct of_device_id *pdev_id =
+		of_match_node(altr_edac_a10_device_of_match, np);
+	if (IS_ERR_OR_NULL(pdev_id))
+		return -ENODEV;
+
+	/* Get driver specific data for this EDAC device */
+	prv = pdev_id->data;
+	if (IS_ERR_OR_NULL(prv))
+		return -ENODEV;
+
+	if (validate_parent_available(np))
+		return -ENODEV;
+
+	if (!devres_open_group(edac->dev, altr_edac_a10_device_add, GFP_KERNEL))
+		return -ENOMEM;
+
+	rc = of_address_to_resource(np, 0, &res);
+	if (rc < 0) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "%s: no resource address\n", ecc_name);
+		goto err_release_group;
+	}
+
+	edac_idx = edac_device_alloc_index();
+	dci = edac_device_alloc_ctl_info(sizeof(*altdev), ecc_name,
+					 1, ecc_name, 1, 0, NULL, 0,
+					 edac_idx);
+
+	if (!dci) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "%s: Unable to allocate EDAC device\n", ecc_name);
+		rc = -ENOMEM;
+		goto err_release_group;
+	}
+
+	altdev = dci->pvt_info;
+	dci->dev = edac->dev;
+	altdev->edac_dev_name = ecc_name;
+	altdev->edac_idx = edac_idx;
+	altdev->edac = edac;
+	altdev->edac_dev = dci;
+	altdev->data = prv;
+	altdev->ddev = *edac->dev;
+	dci->dev = &altdev->ddev;
+	dci->ctl_name = "Altera ECC Manager";
+	dci->mod_name = ecc_name;
+	dci->dev_name = ecc_name;
+
+	altdev->base = devm_ioremap_resource(edac->dev, &res);
+	if (IS_ERR(altdev->base)) {
+		rc = PTR_ERR(altdev->base);
+		goto err_release_group1;
+	}
+
+	/* Check specific dependencies for the module */
+	if (altdev->data->setup) {
+		rc = altdev->data->setup(altdev);
+		if (rc)
+			goto err_release_group1;
+	}
+
+	altdev->sb_irq = irq_of_parse_and_map(np, 0);
+	if (!altdev->sb_irq) {
+		edac_printk(KERN_ERR, EDAC_DEVICE, "Error allocating SBIRQ\n");
+		rc = -ENODEV;
+		goto err_release_group1;
+	}
+	rc = devm_request_irq(edac->dev, altdev->sb_irq, prv->ecc_irq_handler,
+			      IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+			      ecc_name, altdev);
+	if (rc) {
+		edac_printk(KERN_ERR, EDAC_DEVICE, "No SBERR IRQ resource\n");
+		goto err_release_group1;
+	}
+
+	altdev->db_irq = irq_of_parse_and_map(np, 1);
+	if (!altdev->db_irq) {
+		edac_printk(KERN_ERR, EDAC_DEVICE, "Error allocating DBIRQ\n");
+		rc = -ENODEV;
+		goto err_release_group1;
+	}
+	rc = devm_request_irq(edac->dev, altdev->db_irq, prv->ecc_irq_handler,
+			      IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+			      ecc_name, altdev);
+	if (rc) {
+		edac_printk(KERN_ERR, EDAC_DEVICE, "No DBERR IRQ resource\n");
+		goto err_release_group1;
+	}
+
+	rc = edac_device_add_device(dci);
+	if (rc) {
+		dev_err(edac->dev, "edac_device_add_device failed\n");
+		rc = -ENOMEM;
+		goto err_release_group1;
+	}
+
+	altr_create_edacdev_dbgfs(dci, prv);
+
+	list_add(&altdev->next, &edac->a10_ecc_devices);
+
+	devres_remove_group(edac->dev, altr_edac_a10_device_add);
+
+	return 0;
+
+err_release_group1:
+	edac_device_free_ctl_info(dci);
+err_release_group:
+	devres_release_group(edac->dev, NULL);
+	edac_printk(KERN_ERR, EDAC_DEVICE,
+		    "%s:Error setting up EDAC device: %d\n", ecc_name, rc);
+
+	return rc;
+}
+
+static void a10_eccmgr_irq_mask(struct irq_data *d)
+{
+	struct altr_arria10_edac *edac = irq_data_get_irq_chip_data(d);
+
+	regmap_write(edac->ecc_mgr_map,	A10_SYSMGR_ECC_INTMASK_SET_OFST,
+		     BIT(d->hwirq));
+}
+
+static void a10_eccmgr_irq_unmask(struct irq_data *d)
+{
+	struct altr_arria10_edac *edac = irq_data_get_irq_chip_data(d);
+
+	regmap_write(edac->ecc_mgr_map,	A10_SYSMGR_ECC_INTMASK_CLR_OFST,
+		     BIT(d->hwirq));
+}
+
+static int a10_eccmgr_irqdomain_map(struct irq_domain *d, unsigned int irq,
+				    irq_hw_number_t hwirq)
+{
+	struct altr_arria10_edac *edac = d->host_data;
+
+	irq_set_chip_and_handler(irq, &edac->irq_chip, handle_simple_irq);
+	irq_set_chip_data(irq, edac);
+	irq_set_noprobe(irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops a10_eccmgr_ic_ops = {
+	.map = a10_eccmgr_irqdomain_map,
+	.xlate = irq_domain_xlate_twocell,
+};
+
+static int altr_edac_a10_probe(struct platform_device *pdev)
+{
+	struct altr_arria10_edac *edac;
+	struct device_node *child;
+
+	edac = devm_kzalloc(&pdev->dev, sizeof(*edac), GFP_KERNEL);
+	if (!edac)
+		return -ENOMEM;
+
+	edac->dev = &pdev->dev;
+	platform_set_drvdata(pdev, edac);
+	INIT_LIST_HEAD(&edac->a10_ecc_devices);
+
+	edac->ecc_mgr_map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+							"altr,sysmgr-syscon");
+	if (IS_ERR(edac->ecc_mgr_map)) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Unable to get syscon altr,sysmgr-syscon\n");
+		return PTR_ERR(edac->ecc_mgr_map);
+	}
+
+	edac->irq_chip.name = pdev->dev.of_node->name;
+	edac->irq_chip.irq_mask = a10_eccmgr_irq_mask;
+	edac->irq_chip.irq_unmask = a10_eccmgr_irq_unmask;
+	edac->domain = irq_domain_add_linear(pdev->dev.of_node, 64,
+					     &a10_eccmgr_ic_ops, edac);
+	if (!edac->domain) {
+		dev_err(&pdev->dev, "Error adding IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	edac->sb_irq = platform_get_irq(pdev, 0);
+	if (edac->sb_irq < 0) {
+		dev_err(&pdev->dev, "No SBERR IRQ resource\n");
+		return edac->sb_irq;
+	}
+
+	irq_set_chained_handler_and_data(edac->sb_irq,
+					 altr_edac_a10_irq_handler,
+					 edac);
+
+	edac->db_irq = platform_get_irq(pdev, 1);
+	if (edac->db_irq < 0) {
+		dev_err(&pdev->dev, "No DBERR IRQ resource\n");
+		return edac->db_irq;
+	}
+	irq_set_chained_handler_and_data(edac->db_irq,
+					 altr_edac_a10_irq_handler,
+					 edac);
+
+	for_each_child_of_node(pdev->dev.of_node, child) {
+		if (!of_device_is_available(child))
+			continue;
+
+		if (of_device_is_compatible(child, "altr,socfpga-a10-l2-ecc") || 
+		    of_device_is_compatible(child, "altr,socfpga-a10-ocram-ecc") ||
+		    of_device_is_compatible(child, "altr,socfpga-eth-mac-ecc") ||
+		    of_device_is_compatible(child, "altr,socfpga-nand-ecc") ||
+		    of_device_is_compatible(child, "altr,socfpga-dma-ecc") ||
+		    of_device_is_compatible(child, "altr,socfpga-usb-ecc") ||
+		    of_device_is_compatible(child, "altr,socfpga-qspi-ecc") ||
+		    of_device_is_compatible(child, "altr,socfpga-sdmmc-ecc"))
+
+			altr_edac_a10_device_add(edac, child);
+
+		else if (of_device_is_compatible(child, "altr,sdram-edac-a10"))
+			of_platform_populate(pdev->dev.of_node,
+					     altr_sdram_ctrl_of_match,
+					     NULL, &pdev->dev);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id altr_edac_a10_of_match[] = {
+	{ .compatible = "altr,socfpga-a10-ecc-manager" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altr_edac_a10_of_match);
+
+static struct platform_driver altr_edac_a10_driver = {
+	.probe =  altr_edac_a10_probe,
+	.driver = {
+		.name = "socfpga_a10_ecc_manager",
+		.of_match_table = altr_edac_a10_of_match,
+	},
+};
+module_platform_driver(altr_edac_a10_driver);
+
+/************** Stratix 10 EDAC Device Controller Functions> ************/
+
+#define to_s10edac(p, m) container_of(p, struct altr_stratix10_edac, m)
+
+/*
+ * The double bit error is handled through SError which is fatal. This is
+ * called as a panic notifier to printout ECC error info as part of the panic.
+ */
+static int s10_edac_dberr_handler(struct notifier_block *this,
+				  unsigned long event, void *ptr)
+{
+	struct altr_stratix10_edac *edac = to_s10edac(this, panic_notifier);
+	int err_addr, dberror;
+
+	s10_protected_reg_read(edac, S10_SYSMGR_ECC_INTSTAT_DERR_OFST,
+			       &dberror);
+	/* Remember the UE Errors for a reboot */
+	s10_protected_reg_write(edac, S10_SYSMGR_UE_VAL_OFST, dberror);
+	if (dberror & S10_DDR0_IRQ_MASK) {
+		s10_protected_reg_read(edac, S10_DERRADDR_OFST, &err_addr);
+		/* Remember the UE Error address */
+		s10_protected_reg_write(edac, S10_SYSMGR_UE_ADDR_OFST,
+					err_addr);
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "EDAC: [Uncorrectable errors @ 0x%08X]\n\n",
+			    err_addr);
+	}
+
+	return NOTIFY_DONE;
+}
+
+static void altr_edac_s10_irq_handler(struct irq_desc *desc)
+{
+	struct altr_stratix10_edac *edac = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	int irq = irq_desc_get_irq(desc);
+	int bit, sm_offset, irq_status;
+
+	sm_offset = S10_SYSMGR_ECC_INTSTAT_SERR_OFST;
+
+	chained_irq_enter(chip, desc);
+
+	s10_protected_reg_read(NULL, sm_offset, &irq_status);
+
+	for_each_set_bit(bit, (unsigned long *)&irq_status, 32) {
+		irq = irq_linear_revmap(edac->domain, bit);
+		if (irq)
+			generic_handle_irq(irq);
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static void s10_eccmgr_irq_mask(struct irq_data *d)
+{
+	struct altr_stratix10_edac *edac = irq_data_get_irq_chip_data(d);
+
+	s10_protected_reg_write(edac, S10_SYSMGR_ECC_INTMASK_SET_OFST,
+				BIT(d->hwirq));
+}
+
+static void s10_eccmgr_irq_unmask(struct irq_data *d)
+{
+	struct altr_stratix10_edac *edac = irq_data_get_irq_chip_data(d);
+
+	s10_protected_reg_write(edac, S10_SYSMGR_ECC_INTMASK_CLR_OFST,
+				BIT(d->hwirq));
+}
+
+static int s10_eccmgr_irqdomain_map(struct irq_domain *d, unsigned int irq,
+				    irq_hw_number_t hwirq)
+{
+	struct altr_stratix10_edac *edac = d->host_data;
+
+	irq_set_chip_and_handler(irq, &edac->irq_chip, handle_simple_irq);
+	irq_set_chip_data(irq, edac);
+	irq_set_noprobe(irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops s10_eccmgr_ic_ops = {
+	.map = s10_eccmgr_irqdomain_map,
+	.xlate = irq_domain_xlate_twocell,
+};
+
+static int altr_edac_s10_probe(struct platform_device *pdev)
+{
+	struct altr_stratix10_edac *edac;
+	struct device_node *child;
+	int dberror, err_addr;
+
+	edac = devm_kzalloc(&pdev->dev, sizeof(*edac), GFP_KERNEL);
+	if (!edac)
+		return -ENOMEM;
+
+	edac->dev = &pdev->dev;
+	platform_set_drvdata(pdev, edac);
+	INIT_LIST_HEAD(&edac->s10_ecc_devices);
+
+	edac->irq_chip.name = pdev->dev.of_node->name;
+	edac->irq_chip.irq_mask = s10_eccmgr_irq_mask;
+	edac->irq_chip.irq_unmask = s10_eccmgr_irq_unmask;
+	edac->domain = irq_domain_add_linear(pdev->dev.of_node, 64,
+					     &s10_eccmgr_ic_ops, edac);
+	if (!edac->domain) {
+		dev_err(&pdev->dev, "Error adding IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	edac->sb_irq = platform_get_irq(pdev, 0);
+	if (edac->sb_irq < 0) {
+		dev_err(&pdev->dev, "No SBERR IRQ resource\n");
+		return edac->sb_irq;
+	}
+
+	irq_set_chained_handler_and_data(edac->sb_irq,
+					 altr_edac_s10_irq_handler,
+					 edac);
+
+	edac->panic_notifier.notifier_call = s10_edac_dberr_handler;
+	atomic_notifier_chain_register(&panic_notifier_list,
+				       &edac->panic_notifier);
+
+	/* Printout a message if uncorrectable error previously. */
+	s10_protected_reg_read(edac, S10_SYSMGR_UE_VAL_OFST, &dberror);
+	if (dberror) {
+		s10_protected_reg_read(edac, S10_SYSMGR_UE_ADDR_OFST,
+				       &err_addr);
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Previous Boot UE detected[0x%X] @ 0x%X\n",
+			    dberror, err_addr);
+		/* Reset the sticky registers */
+		s10_protected_reg_write(edac, S10_SYSMGR_UE_VAL_OFST, 0);
+		s10_protected_reg_write(edac, S10_SYSMGR_UE_ADDR_OFST, 0);
+	}
+
+	for_each_child_of_node(pdev->dev.of_node, child) {
+		if (!of_device_is_available(child))
+			continue;
+
+		if (of_device_is_compatible(child, "altr,sdram-edac-s10"))
+			of_platform_populate(pdev->dev.of_node,
+					     altr_sdram_ctrl_of_match,
+					     NULL, &pdev->dev);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id altr_edac_s10_of_match[] = {
+	{ .compatible = "altr,socfpga-s10-ecc-manager" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altr_edac_s10_of_match);
+
+static struct platform_driver altr_edac_s10_driver = {
+	.probe =  altr_edac_s10_probe,
+	.driver = {
+		.name = "socfpga_s10_ecc_manager",
+		.of_match_table = altr_edac_s10_of_match,
+	},
+};
+module_platform_driver(altr_edac_s10_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Thor Thayer");
+MODULE_DESCRIPTION("EDAC Driver for Altera Memories");
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
new file mode 100644
index 000000000..81f0554e0
--- /dev/null
+++ b/drivers/edac/altera_edac.h
@@ -0,0 +1,449 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017-2018, Intel Corporation
+ * Copyright (C) 2015 Altera Corporation
+ */
+
+#ifndef _ALTERA_EDAC_H
+#define _ALTERA_EDAC_H
+
+#include <linux/arm-smccc.h>
+#include <linux/edac.h>
+#include <linux/types.h>
+
+/* SDRAM Controller CtrlCfg Register */
+#define CV_CTLCFG_OFST             0x00
+
+/* SDRAM Controller CtrlCfg Register Bit Masks */
+#define CV_CTLCFG_ECC_EN           0x400
+#define CV_CTLCFG_ECC_CORR_EN      0x800
+#define CV_CTLCFG_GEN_SB_ERR       0x2000
+#define CV_CTLCFG_GEN_DB_ERR       0x4000
+
+#define CV_CTLCFG_ECC_AUTO_EN     (CV_CTLCFG_ECC_EN)
+
+/* SDRAM Controller Address Width Register */
+#define CV_DRAMADDRW_OFST          0x2C
+
+/* SDRAM Controller Address Widths Field Register */
+#define DRAMADDRW_COLBIT_MASK      0x001F
+#define DRAMADDRW_COLBIT_SHIFT     0
+#define DRAMADDRW_ROWBIT_MASK      0x03E0
+#define DRAMADDRW_ROWBIT_SHIFT     5
+#define CV_DRAMADDRW_BANKBIT_MASK  0x1C00
+#define CV_DRAMADDRW_BANKBIT_SHIFT 10
+#define CV_DRAMADDRW_CSBIT_MASK    0xE000
+#define CV_DRAMADDRW_CSBIT_SHIFT   13
+
+/* SDRAM Controller Interface Data Width Register */
+#define CV_DRAMIFWIDTH_OFST        0x30
+
+/* SDRAM Controller Interface Data Width Defines */
+#define CV_DRAMIFWIDTH_16B_ECC     24
+#define CV_DRAMIFWIDTH_32B_ECC     40
+
+/* SDRAM Controller DRAM Status Register */
+#define CV_DRAMSTS_OFST            0x38
+
+/* SDRAM Controller DRAM Status Register Bit Masks */
+#define CV_DRAMSTS_SBEERR          0x04
+#define CV_DRAMSTS_DBEERR          0x08
+#define CV_DRAMSTS_CORR_DROP       0x10
+
+/* SDRAM Controller DRAM IRQ Register */
+#define CV_DRAMINTR_OFST           0x3C
+
+/* SDRAM Controller DRAM IRQ Register Bit Masks */
+#define CV_DRAMINTR_INTREN         0x01
+#define CV_DRAMINTR_SBEMASK        0x02
+#define CV_DRAMINTR_DBEMASK        0x04
+#define CV_DRAMINTR_CORRDROPMASK   0x08
+#define CV_DRAMINTR_INTRCLR        0x10
+
+/* SDRAM Controller Single Bit Error Count Register */
+#define CV_SBECOUNT_OFST           0x40
+
+/* SDRAM Controller Double Bit Error Count Register */
+#define CV_DBECOUNT_OFST           0x44
+
+/* SDRAM Controller ECC Error Address Register */
+#define CV_ERRADDR_OFST            0x48
+
+/*-----------------------------------------*/
+
+/* SDRAM Controller EccCtrl Register */
+#define A10_ECCCTRL1_OFST          0x00
+
+/* SDRAM Controller EccCtrl Register Bit Masks */
+#define A10_ECCCTRL1_ECC_EN        0x001
+#define A10_ECCCTRL1_CNT_RST       0x010
+#define A10_ECCCTRL1_AWB_CNT_RST   0x100
+#define A10_ECC_CNT_RESET_MASK     (A10_ECCCTRL1_CNT_RST | \
+				    A10_ECCCTRL1_AWB_CNT_RST)
+
+/* SDRAM Controller Address Width Register */
+#define CV_DRAMADDRW               0xFFC2502C
+#define A10_DRAMADDRW              0xFFCFA0A8
+#define S10_DRAMADDRW              0xF80110E0
+
+/* SDRAM Controller Address Widths Field Register */
+#define DRAMADDRW_COLBIT_MASK      0x001F
+#define DRAMADDRW_COLBIT_SHIFT     0
+#define DRAMADDRW_ROWBIT_MASK      0x03E0
+#define DRAMADDRW_ROWBIT_SHIFT     5
+#define CV_DRAMADDRW_BANKBIT_MASK  0x1C00
+#define CV_DRAMADDRW_BANKBIT_SHIFT 10
+#define CV_DRAMADDRW_CSBIT_MASK    0xE000
+#define CV_DRAMADDRW_CSBIT_SHIFT   13
+
+#define A10_DRAMADDRW_BANKBIT_MASK  0x3C00
+#define A10_DRAMADDRW_BANKBIT_SHIFT 10
+#define A10_DRAMADDRW_GRPBIT_MASK   0xC000
+#define A10_DRAMADDRW_GRPBIT_SHIFT  14
+#define A10_DRAMADDRW_CSBIT_MASK    0x70000
+#define A10_DRAMADDRW_CSBIT_SHIFT   16
+
+/* SDRAM Controller Interface Data Width Register */
+#define CV_DRAMIFWIDTH             0xFFC25030
+#define A10_DRAMIFWIDTH            0xFFCFB008
+#define S10_DRAMIFWIDTH            0xF8011008
+
+/* SDRAM Controller Interface Data Width Defines */
+#define CV_DRAMIFWIDTH_16B_ECC     24
+#define CV_DRAMIFWIDTH_32B_ECC     40
+
+#define A10_DRAMIFWIDTH_16B        0x0
+#define A10_DRAMIFWIDTH_32B        0x1
+#define A10_DRAMIFWIDTH_64B        0x2
+
+/* SDRAM Controller DRAM IRQ Register */
+#define A10_ERRINTEN_OFST          0x10
+
+/* SDRAM Controller DRAM IRQ Register Bit Masks */
+#define A10_ERRINTEN_SERRINTEN     0x01
+#define A10_ERRINTEN_DERRINTEN     0x02
+#define A10_ECC_IRQ_EN_MASK        (A10_ERRINTEN_SERRINTEN | \
+				    A10_ERRINTEN_DERRINTEN)
+
+/* SDRAM Interrupt Mode Register */
+#define A10_INTMODE_OFST           0x1C
+#define A10_INTMODE_SB_INT         1
+
+/* SDRAM Controller Error Status Register */
+#define A10_INTSTAT_OFST           0x20
+
+/* SDRAM Controller Error Status Register Bit Masks */
+#define A10_INTSTAT_SBEERR         0x01
+#define A10_INTSTAT_DBEERR         0x02
+
+/* SDRAM Controller ECC Error Address Register */
+#define A10_DERRADDR_OFST          0x2C
+#define A10_SERRADDR_OFST          0x30
+
+/* SDRAM Controller ECC Diagnostic Register */
+#define A10_DIAGINTTEST_OFST       0x24
+
+#define A10_DIAGINT_TSERRA_MASK    0x0001
+#define A10_DIAGINT_TDERRA_MASK    0x0100
+
+#define A10_SBERR_IRQ              34
+#define A10_DBERR_IRQ              32
+
+/* SDRAM Single Bit Error Count Compare Set Register */
+#define A10_SERRCNTREG_OFST        0x3C
+
+#define A10_SYMAN_INTMASK_CLR      0xFFD06098
+#define A10_INTMASK_CLR_OFST       0x10
+#define A10_DDR0_IRQ_MASK          BIT(17)
+
+/************* Stratix10 Defines **************/
+
+/* SDRAM Controller EccCtrl Register */
+#define S10_ECCCTRL1_OFST          0xF8011100
+
+/* SDRAM Controller DRAM IRQ Register */
+#define S10_ERRINTEN_OFST          0xF8011110
+
+/* SDRAM Interrupt Mode Register */
+#define S10_INTMODE_OFST           0xF801111C
+
+/* SDRAM Controller Error Status Register */
+#define S10_INTSTAT_OFST           0xF8011120
+
+/* SDRAM Controller ECC Error Address Register */
+#define S10_DERRADDR_OFST          0xF801112C
+#define S10_SERRADDR_OFST          0xF8011130
+
+/* SDRAM Controller ECC Diagnostic Register */
+#define S10_DIAGINTTEST_OFST       0xF8011124
+
+/* SDRAM Single Bit Error Count Compare Set Register */
+#define S10_SERRCNTREG_OFST        0xF801113C
+
+/* Sticky registers for Uncorrected Errors */
+#define S10_SYSMGR_UE_VAL_OFST     0xFFD12220
+#define S10_SYSMGR_UE_ADDR_OFST    0xFFD12224
+
+struct altr_sdram_prv_data {
+	int ecc_ctrl_offset;
+	int ecc_ctl_en_mask;
+	int ecc_cecnt_offset;
+	int ecc_uecnt_offset;
+	int ecc_stat_offset;
+	int ecc_stat_ce_mask;
+	int ecc_stat_ue_mask;
+	int ecc_saddr_offset;
+	int ecc_daddr_offset;
+	int ecc_irq_en_offset;
+	int ecc_irq_en_mask;
+	int ecc_irq_clr_offset;
+	int ecc_irq_clr_mask;
+	int ecc_cnt_rst_offset;
+	int ecc_cnt_rst_mask;
+	struct edac_dev_sysfs_attribute *eccmgr_sysfs_attr;
+	int ecc_enable_mask;
+	int ce_set_mask;
+	int ue_set_mask;
+	int ce_ue_trgr_offset;
+};
+
+/* Altera SDRAM Memory Controller data */
+struct altr_sdram_mc_data {
+	struct regmap *mc_vbase;
+	int sb_irq;
+	int db_irq;
+	const struct altr_sdram_prv_data *data;
+};
+
+/************************** EDAC Device Defines **************************/
+/***** General Device Trigger Defines *****/
+#define ALTR_UE_TRIGGER_CHAR            'U'   /* Trigger for UE */
+#define ALTR_TRIGGER_READ_WRD_CNT       32    /* Line size x 4 */
+#define ALTR_TRIG_OCRAM_BYTE_SIZE       128   /* Line size x 4 */
+#define ALTR_TRIG_L2C_BYTE_SIZE         4096  /* Full Page */
+
+/******* Cyclone5 and Arria5 Defines *******/
+/* OCRAM ECC Management Group Defines */
+#define ALTR_MAN_GRP_OCRAM_ECC_OFFSET   0x04
+#define ALTR_OCR_ECC_REG_OFFSET         0x00
+#define ALTR_OCR_ECC_EN                 BIT(0)
+#define ALTR_OCR_ECC_INJS               BIT(1)
+#define ALTR_OCR_ECC_INJD               BIT(2)
+#define ALTR_OCR_ECC_SERR               BIT(3)
+#define ALTR_OCR_ECC_DERR               BIT(4)
+
+/* L2 ECC Management Group Defines */
+#define ALTR_MAN_GRP_L2_ECC_OFFSET      0x00
+#define ALTR_L2_ECC_REG_OFFSET          0x00
+#define ALTR_L2_ECC_EN                  BIT(0)
+#define ALTR_L2_ECC_INJS                BIT(1)
+#define ALTR_L2_ECC_INJD                BIT(2)
+
+/* Arria10 General ECC Block Module Defines */
+#define ALTR_A10_ECC_CTRL_OFST          0x08
+#define ALTR_A10_ECC_EN                 BIT(0)
+#define ALTR_A10_ECC_INITA              BIT(16)
+#define ALTR_A10_ECC_INITB              BIT(24)
+
+#define ALTR_A10_ECC_INITSTAT_OFST      0x0C
+#define ALTR_A10_ECC_INITCOMPLETEA      BIT(0)
+#define ALTR_A10_ECC_INITCOMPLETEB      BIT(8)
+
+#define ALTR_A10_ECC_ERRINTEN_OFST      0x10
+#define ALTR_A10_ECC_ERRINTENS_OFST     0x14
+#define ALTR_A10_ECC_ERRINTENR_OFST     0x18
+#define ALTR_A10_ECC_SERRINTEN          BIT(0)
+
+#define ALTR_A10_ECC_INTMODE_OFST       0x1C
+#define ALTR_A10_ECC_INTMODE            BIT(0)
+
+#define ALTR_A10_ECC_INTSTAT_OFST       0x20
+#define ALTR_A10_ECC_SERRPENA           BIT(0)
+#define ALTR_A10_ECC_DERRPENA           BIT(8)
+#define ALTR_A10_ECC_ERRPENA_MASK       (ALTR_A10_ECC_SERRPENA | \
+					 ALTR_A10_ECC_DERRPENA)
+#define ALTR_A10_ECC_SERRPENB           BIT(16)
+#define ALTR_A10_ECC_DERRPENB           BIT(24)
+#define ALTR_A10_ECC_ERRPENB_MASK       (ALTR_A10_ECC_SERRPENB | \
+					 ALTR_A10_ECC_DERRPENB)
+
+#define ALTR_A10_ECC_INTTEST_OFST       0x24
+#define ALTR_A10_ECC_TSERRA             BIT(0)
+#define ALTR_A10_ECC_TDERRA             BIT(8)
+#define ALTR_A10_ECC_TSERRB             BIT(16)
+#define ALTR_A10_ECC_TDERRB             BIT(24)
+
+/* ECC Manager Defines */
+#define A10_SYSMGR_ECC_INTMASK_SET_OFST   0x94
+#define A10_SYSMGR_ECC_INTMASK_CLR_OFST   0x98
+#define A10_SYSMGR_ECC_INTMASK_OCRAM      BIT(1)
+
+#define A10_SYSMGR_ECC_INTSTAT_SERR_OFST  0x9C
+#define A10_SYSMGR_ECC_INTSTAT_DERR_OFST  0xA0
+#define A10_SYSMGR_ECC_INTSTAT_L2         BIT(0)
+#define A10_SYSMGR_ECC_INTSTAT_OCRAM      BIT(1)
+
+#define A10_SYSGMR_MPU_CLEAR_L2_ECC_OFST  0xA8
+#define A10_SYSGMR_MPU_CLEAR_L2_ECC_SB    BIT(15)
+#define A10_SYSGMR_MPU_CLEAR_L2_ECC_MB    BIT(31)
+
+/* Arria 10 L2 ECC Management Group Defines */
+#define ALTR_A10_L2_ECC_CTL_OFST        0x0
+#define ALTR_A10_L2_ECC_EN_CTL          BIT(0)
+
+#define ALTR_A10_L2_ECC_STATUS          0xFFD060A4
+#define ALTR_A10_L2_ECC_STAT_OFST       0xA4
+#define ALTR_A10_L2_ECC_SERR_PEND       BIT(0)
+#define ALTR_A10_L2_ECC_MERR_PEND       BIT(0)
+
+#define ALTR_A10_L2_ECC_CLR_OFST        0x4
+#define ALTR_A10_L2_ECC_SERR_CLR        BIT(15)
+#define ALTR_A10_L2_ECC_MERR_CLR        BIT(31)
+
+#define ALTR_A10_L2_ECC_INJ_OFST        ALTR_A10_L2_ECC_CTL_OFST
+#define ALTR_A10_L2_ECC_CE_INJ_MASK     0x00000101
+#define ALTR_A10_L2_ECC_UE_INJ_MASK     0x00010101
+
+/* Arria 10 OCRAM ECC Management Group Defines */
+#define ALTR_A10_OCRAM_ECC_EN_CTL       (BIT(1) | BIT(0))
+
+/* Arria 10 Ethernet ECC Management Group Defines */
+#define ALTR_A10_COMMON_ECC_EN_CTL      BIT(0)
+
+/* Arria 10 SDMMC ECC Management Group Defines */
+#define ALTR_A10_SDMMC_IRQ_MASK         (BIT(16) | BIT(15))
+
+/* A10 ECC Controller memory initialization timeout */
+#define ALTR_A10_ECC_INIT_WATCHDOG_10US      10000
+
+/************* Stratix10 Defines **************/
+
+/* Stratix10 ECC Manager Defines */
+#define S10_SYSMGR_ECC_INTMASK_VAL_OFST   0xFFD12090
+#define S10_SYSMGR_ECC_INTMASK_SET_OFST   0xFFD12094
+#define S10_SYSMGR_ECC_INTMASK_CLR_OFST   0xFFD12098
+
+#define S10_SYSMGR_ECC_INTSTAT_SERR_OFST  0xFFD1209C
+#define S10_SYSMGR_ECC_INTSTAT_DERR_OFST  0xFFD120A0
+
+#define S10_DDR0_IRQ_MASK                 BIT(16)
+
+struct altr_edac_device_dev;
+
+struct edac_device_prv_data {
+	int (*setup)(struct altr_edac_device_dev *device);
+	int ce_clear_mask;
+	int ue_clear_mask;
+	int irq_status_mask;
+	void * (*alloc_mem)(size_t size, void **other);
+	void (*free_mem)(void *p, size_t size, void *other);
+	int ecc_enable_mask;
+	int ecc_en_ofst;
+	int ce_set_mask;
+	int ue_set_mask;
+	int set_err_ofst;
+	irqreturn_t (*ecc_irq_handler)(int irq, void *dev_id);
+	int trig_alloc_sz;
+	const struct file_operations *inject_fops;
+	bool panic;
+};
+
+struct altr_edac_device_dev {
+	struct list_head next;
+	void __iomem *base;
+	int sb_irq;
+	int db_irq;
+	const struct edac_device_prv_data *data;
+	struct dentry *debugfs_dir;
+	char *edac_dev_name;
+	struct altr_arria10_edac *edac;
+	struct edac_device_ctl_info *edac_dev;
+	struct device ddev;
+	int edac_idx;
+};
+
+struct altr_arria10_edac {
+	struct device		*dev;
+	struct regmap		*ecc_mgr_map;
+	int sb_irq;
+	int db_irq;
+	struct irq_domain	*domain;
+	struct irq_chip		irq_chip;
+	struct list_head	a10_ecc_devices;
+};
+
+/*
+ * Functions specified by ARM SMC Calling convention:
+ *
+ * FAST call executes atomic operations, returns when the requested operation
+ * has completed.
+ * STD call starts a operation which can be preempted by a non-secure
+ * interrupt. The call can return before the requested operation has
+ * completed.
+ *
+ * a0..a7 is used as register names in the descriptions below, on arm32
+ * that translates to r0..r7 and on arm64 to w0..w7.
+ */
+
+#define INTEL_SIP_SMC_STD_CALL_VAL(func_num) \
+	ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_64, \
+	ARM_SMCCC_OWNER_SIP, (func_num))
+
+#define INTEL_SIP_SMC_FAST_CALL_VAL(func_num) \
+	ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, \
+	ARM_SMCCC_OWNER_SIP, (func_num))
+
+#define INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION		0xFFFFFFFF
+#define INTEL_SIP_SMC_STATUS_OK				0x0
+#define INTEL_SIP_SMC_REG_ERROR				0x5
+
+/*
+ * Request INTEL_SIP_SMC_REG_READ
+ *
+ * Read a protected register using SMCCC
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_REG_READ.
+ * a1: register address.
+ * a2-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_REG_ERROR, or
+ *     INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION
+ * a1: Value in the register
+ * a2-3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_REG_READ 7
+#define INTEL_SIP_SMC_REG_READ \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_READ)
+
+/*
+ * Request INTEL_SIP_SMC_REG_WRITE
+ *
+ * Write a protected register using SMCCC
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_REG_WRITE.
+ * a1: register address
+ * a2: value to program into register.
+ * a3-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_REG_ERROR, or
+ *     INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION
+ * a1-3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_REG_WRITE 8
+#define INTEL_SIP_SMC_REG_WRITE \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_WRITE)
+
+struct altr_stratix10_edac {
+	struct device		*dev;
+	int sb_irq;
+	struct irq_domain	*domain;
+	struct irq_chip		irq_chip;
+	struct list_head	s10_ecc_devices;
+	struct notifier_block	panic_notifier;
+};
+
+#endif	/* #ifndef _ALTERA_EDAC_H */
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
new file mode 100644
index 000000000..fe25c9838
--- /dev/null
+++ b/drivers/edac/amd64_edac.c
@@ -0,0 +1,3585 @@
+#include "amd64_edac.h"
+#include <asm/amd_nb.h>
+
+static struct edac_pci_ctl_info *pci_ctl;
+
+static int report_gart_errors;
+module_param(report_gart_errors, int, 0644);
+
+/*
+ * Set by command line parameter. If BIOS has enabled the ECC, this override is
+ * cleared to prevent re-enabling the hardware by this driver.
+ */
+static int ecc_enable_override;
+module_param(ecc_enable_override, int, 0644);
+
+static struct msr __percpu *msrs;
+
+/* Per-node stuff */
+static struct ecc_settings **ecc_stngs;
+
+/* Device for the PCI component */
+static struct device *pci_ctl_dev;
+
+/*
+ * Valid scrub rates for the K8 hardware memory scrubber. We map the scrubbing
+ * bandwidth to a valid bit pattern. The 'set' operation finds the 'matching-
+ * or higher value'.
+ *
+ *FIXME: Produce a better mapping/linearisation.
+ */
+static const struct scrubrate {
+       u32 scrubval;           /* bit pattern for scrub rate */
+       u32 bandwidth;          /* bandwidth consumed (bytes/sec) */
+} scrubrates[] = {
+	{ 0x01, 1600000000UL},
+	{ 0x02, 800000000UL},
+	{ 0x03, 400000000UL},
+	{ 0x04, 200000000UL},
+	{ 0x05, 100000000UL},
+	{ 0x06, 50000000UL},
+	{ 0x07, 25000000UL},
+	{ 0x08, 12284069UL},
+	{ 0x09, 6274509UL},
+	{ 0x0A, 3121951UL},
+	{ 0x0B, 1560975UL},
+	{ 0x0C, 781440UL},
+	{ 0x0D, 390720UL},
+	{ 0x0E, 195300UL},
+	{ 0x0F, 97650UL},
+	{ 0x10, 48854UL},
+	{ 0x11, 24427UL},
+	{ 0x12, 12213UL},
+	{ 0x13, 6101UL},
+	{ 0x14, 3051UL},
+	{ 0x15, 1523UL},
+	{ 0x16, 761UL},
+	{ 0x00, 0UL},        /* scrubbing off */
+};
+
+int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
+			       u32 *val, const char *func)
+{
+	int err = 0;
+
+	err = pci_read_config_dword(pdev, offset, val);
+	if (err)
+		amd64_warn("%s: error reading F%dx%03x.\n",
+			   func, PCI_FUNC(pdev->devfn), offset);
+
+	return err;
+}
+
+int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset,
+				u32 val, const char *func)
+{
+	int err = 0;
+
+	err = pci_write_config_dword(pdev, offset, val);
+	if (err)
+		amd64_warn("%s: error writing to F%dx%03x.\n",
+			   func, PCI_FUNC(pdev->devfn), offset);
+
+	return err;
+}
+
+/*
+ * Select DCT to which PCI cfg accesses are routed
+ */
+static void f15h_select_dct(struct amd64_pvt *pvt, u8 dct)
+{
+	u32 reg = 0;
+
+	amd64_read_pci_cfg(pvt->F1, DCT_CFG_SEL, &reg);
+	reg &= (pvt->model == 0x30) ? ~3 : ~1;
+	reg |= dct;
+	amd64_write_pci_cfg(pvt->F1, DCT_CFG_SEL, reg);
+}
+
+/*
+ *
+ * Depending on the family, F2 DCT reads need special handling:
+ *
+ * K8: has a single DCT only and no address offsets >= 0x100
+ *
+ * F10h: each DCT has its own set of regs
+ *	DCT0 -> F2x040..
+ *	DCT1 -> F2x140..
+ *
+ * F16h: has only 1 DCT
+ *
+ * F15h: we select which DCT we access using F1x10C[DctCfgSel]
+ */
+static inline int amd64_read_dct_pci_cfg(struct amd64_pvt *pvt, u8 dct,
+					 int offset, u32 *val)
+{
+	switch (pvt->fam) {
+	case 0xf:
+		if (dct || offset >= 0x100)
+			return -EINVAL;
+		break;
+
+	case 0x10:
+		if (dct) {
+			/*
+			 * Note: If ganging is enabled, barring the regs
+			 * F2x[1,0]98 and F2x[1,0]9C; reads reads to F2x1xx
+			 * return 0. (cf. Section 2.8.1 F10h BKDG)
+			 */
+			if (dct_ganging_enabled(pvt))
+				return 0;
+
+			offset += 0x100;
+		}
+		break;
+
+	case 0x15:
+		/*
+		 * F15h: F2x1xx addresses do not map explicitly to DCT1.
+		 * We should select which DCT we access using F1x10C[DctCfgSel]
+		 */
+		dct = (dct && pvt->model == 0x30) ? 3 : dct;
+		f15h_select_dct(pvt, dct);
+		break;
+
+	case 0x16:
+		if (dct)
+			return -EINVAL;
+		break;
+
+	default:
+		break;
+	}
+	return amd64_read_pci_cfg(pvt->F2, offset, val);
+}
+
+/*
+ * Memory scrubber control interface. For K8, memory scrubbing is handled by
+ * hardware and can involve L2 cache, dcache as well as the main memory. With
+ * F10, this is extended to L3 cache scrubbing on CPU models sporting that
+ * functionality.
+ *
+ * This causes the "units" for the scrubbing speed to vary from 64 byte blocks
+ * (dram) over to cache lines. This is nasty, so we will use bandwidth in
+ * bytes/sec for the setting.
+ *
+ * Currently, we only do dram scrubbing. If the scrubbing is done in software on
+ * other archs, we might not have access to the caches directly.
+ */
+
+static inline void __f17h_set_scrubval(struct amd64_pvt *pvt, u32 scrubval)
+{
+	/*
+	 * Fam17h supports scrub values between 0x5 and 0x14. Also, the values
+	 * are shifted down by 0x5, so scrubval 0x5 is written to the register
+	 * as 0x0, scrubval 0x6 as 0x1, etc.
+	 */
+	if (scrubval >= 0x5 && scrubval <= 0x14) {
+		scrubval -= 0x5;
+		pci_write_bits32(pvt->F6, F17H_SCR_LIMIT_ADDR, scrubval, 0xF);
+		pci_write_bits32(pvt->F6, F17H_SCR_BASE_ADDR, 1, 0x1);
+	} else {
+		pci_write_bits32(pvt->F6, F17H_SCR_BASE_ADDR, 0, 0x1);
+	}
+}
+/*
+ * Scan the scrub rate mapping table for a close or matching bandwidth value to
+ * issue. If requested is too big, then use last maximum value found.
+ */
+static int __set_scrub_rate(struct amd64_pvt *pvt, u32 new_bw, u32 min_rate)
+{
+	u32 scrubval;
+	int i;
+
+	/*
+	 * map the configured rate (new_bw) to a value specific to the AMD64
+	 * memory controller and apply to register. Search for the first
+	 * bandwidth entry that is greater or equal than the setting requested
+	 * and program that. If at last entry, turn off DRAM scrubbing.
+	 *
+	 * If no suitable bandwidth is found, turn off DRAM scrubbing entirely
+	 * by falling back to the last element in scrubrates[].
+	 */
+	for (i = 0; i < ARRAY_SIZE(scrubrates) - 1; i++) {
+		/*
+		 * skip scrub rates which aren't recommended
+		 * (see F10 BKDG, F3x58)
+		 */
+		if (scrubrates[i].scrubval < min_rate)
+			continue;
+
+		if (scrubrates[i].bandwidth <= new_bw)
+			break;
+	}
+
+	scrubval = scrubrates[i].scrubval;
+
+	if (pvt->fam == 0x17) {
+		__f17h_set_scrubval(pvt, scrubval);
+	} else if (pvt->fam == 0x15 && pvt->model == 0x60) {
+		f15h_select_dct(pvt, 0);
+		pci_write_bits32(pvt->F2, F15H_M60H_SCRCTRL, scrubval, 0x001F);
+		f15h_select_dct(pvt, 1);
+		pci_write_bits32(pvt->F2, F15H_M60H_SCRCTRL, scrubval, 0x001F);
+	} else {
+		pci_write_bits32(pvt->F3, SCRCTRL, scrubval, 0x001F);
+	}
+
+	if (scrubval)
+		return scrubrates[i].bandwidth;
+
+	return 0;
+}
+
+static int set_scrub_rate(struct mem_ctl_info *mci, u32 bw)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	u32 min_scrubrate = 0x5;
+
+	if (pvt->fam == 0xf)
+		min_scrubrate = 0x0;
+
+	if (pvt->fam == 0x15) {
+		/* Erratum #505 */
+		if (pvt->model < 0x10)
+			f15h_select_dct(pvt, 0);
+
+		if (pvt->model == 0x60)
+			min_scrubrate = 0x6;
+	}
+	return __set_scrub_rate(pvt, bw, min_scrubrate);
+}
+
+static int get_scrub_rate(struct mem_ctl_info *mci)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	int i, retval = -EINVAL;
+	u32 scrubval = 0;
+
+	switch (pvt->fam) {
+	case 0x15:
+		/* Erratum #505 */
+		if (pvt->model < 0x10)
+			f15h_select_dct(pvt, 0);
+
+		if (pvt->model == 0x60)
+			amd64_read_pci_cfg(pvt->F2, F15H_M60H_SCRCTRL, &scrubval);
+		else
+			amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval);
+		break;
+
+	case 0x17:
+		amd64_read_pci_cfg(pvt->F6, F17H_SCR_BASE_ADDR, &scrubval);
+		if (scrubval & BIT(0)) {
+			amd64_read_pci_cfg(pvt->F6, F17H_SCR_LIMIT_ADDR, &scrubval);
+			scrubval &= 0xF;
+			scrubval += 0x5;
+		} else {
+			scrubval = 0;
+		}
+		break;
+
+	default:
+		amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval);
+		break;
+	}
+
+	scrubval = scrubval & 0x001F;
+
+	for (i = 0; i < ARRAY_SIZE(scrubrates); i++) {
+		if (scrubrates[i].scrubval == scrubval) {
+			retval = scrubrates[i].bandwidth;
+			break;
+		}
+	}
+	return retval;
+}
+
+/*
+ * returns true if the SysAddr given by sys_addr matches the
+ * DRAM base/limit associated with node_id
+ */
+static bool base_limit_match(struct amd64_pvt *pvt, u64 sys_addr, u8 nid)
+{
+	u64 addr;
+
+	/* The K8 treats this as a 40-bit value.  However, bits 63-40 will be
+	 * all ones if the most significant implemented address bit is 1.
+	 * Here we discard bits 63-40.  See section 3.4.2 of AMD publication
+	 * 24592: AMD x86-64 Architecture Programmer's Manual Volume 1
+	 * Application Programming.
+	 */
+	addr = sys_addr & 0x000000ffffffffffull;
+
+	return ((addr >= get_dram_base(pvt, nid)) &&
+		(addr <= get_dram_limit(pvt, nid)));
+}
+
+/*
+ * Attempt to map a SysAddr to a node. On success, return a pointer to the
+ * mem_ctl_info structure for the node that the SysAddr maps to.
+ *
+ * On failure, return NULL.
+ */
+static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci,
+						u64 sys_addr)
+{
+	struct amd64_pvt *pvt;
+	u8 node_id;
+	u32 intlv_en, bits;
+
+	/*
+	 * Here we use the DRAM Base (section 3.4.4.1) and DRAM Limit (section
+	 * 3.4.4.2) registers to map the SysAddr to a node ID.
+	 */
+	pvt = mci->pvt_info;
+
+	/*
+	 * The value of this field should be the same for all DRAM Base
+	 * registers.  Therefore we arbitrarily choose to read it from the
+	 * register for node 0.
+	 */
+	intlv_en = dram_intlv_en(pvt, 0);
+
+	if (intlv_en == 0) {
+		for (node_id = 0; node_id < DRAM_RANGES; node_id++) {
+			if (base_limit_match(pvt, sys_addr, node_id))
+				goto found;
+		}
+		goto err_no_match;
+	}
+
+	if (unlikely((intlv_en != 0x01) &&
+		     (intlv_en != 0x03) &&
+		     (intlv_en != 0x07))) {
+		amd64_warn("DRAM Base[IntlvEn] junk value: 0x%x, BIOS bug?\n", intlv_en);
+		return NULL;
+	}
+
+	bits = (((u32) sys_addr) >> 12) & intlv_en;
+
+	for (node_id = 0; ; ) {
+		if ((dram_intlv_sel(pvt, node_id) & intlv_en) == bits)
+			break;	/* intlv_sel field matches */
+
+		if (++node_id >= DRAM_RANGES)
+			goto err_no_match;
+	}
+
+	/* sanity test for sys_addr */
+	if (unlikely(!base_limit_match(pvt, sys_addr, node_id))) {
+		amd64_warn("%s: sys_addr 0x%llx falls outside base/limit address"
+			   "range for node %d with node interleaving enabled.\n",
+			   __func__, sys_addr, node_id);
+		return NULL;
+	}
+
+found:
+	return edac_mc_find((int)node_id);
+
+err_no_match:
+	edac_dbg(2, "sys_addr 0x%lx doesn't match any node\n",
+		 (unsigned long)sys_addr);
+
+	return NULL;
+}
+
+/*
+ * compute the CS base address of the @csrow on the DRAM controller @dct.
+ * For details see F2x[5C:40] in the processor's BKDG
+ */
+static void get_cs_base_and_mask(struct amd64_pvt *pvt, int csrow, u8 dct,
+				 u64 *base, u64 *mask)
+{
+	u64 csbase, csmask, base_bits, mask_bits;
+	u8 addr_shift;
+
+	if (pvt->fam == 0xf && pvt->ext_model < K8_REV_F) {
+		csbase		= pvt->csels[dct].csbases[csrow];
+		csmask		= pvt->csels[dct].csmasks[csrow];
+		base_bits	= GENMASK_ULL(31, 21) | GENMASK_ULL(15, 9);
+		mask_bits	= GENMASK_ULL(29, 21) | GENMASK_ULL(15, 9);
+		addr_shift	= 4;
+
+	/*
+	 * F16h and F15h, models 30h and later need two addr_shift values:
+	 * 8 for high and 6 for low (cf. F16h BKDG).
+	 */
+	} else if (pvt->fam == 0x16 ||
+		  (pvt->fam == 0x15 && pvt->model >= 0x30)) {
+		csbase          = pvt->csels[dct].csbases[csrow];
+		csmask          = pvt->csels[dct].csmasks[csrow >> 1];
+
+		*base  = (csbase & GENMASK_ULL(15,  5)) << 6;
+		*base |= (csbase & GENMASK_ULL(30, 19)) << 8;
+
+		*mask = ~0ULL;
+		/* poke holes for the csmask */
+		*mask &= ~((GENMASK_ULL(15, 5)  << 6) |
+			   (GENMASK_ULL(30, 19) << 8));
+
+		*mask |= (csmask & GENMASK_ULL(15, 5))  << 6;
+		*mask |= (csmask & GENMASK_ULL(30, 19)) << 8;
+
+		return;
+	} else {
+		csbase		= pvt->csels[dct].csbases[csrow];
+		csmask		= pvt->csels[dct].csmasks[csrow >> 1];
+		addr_shift	= 8;
+
+		if (pvt->fam == 0x15)
+			base_bits = mask_bits =
+				GENMASK_ULL(30,19) | GENMASK_ULL(13,5);
+		else
+			base_bits = mask_bits =
+				GENMASK_ULL(28,19) | GENMASK_ULL(13,5);
+	}
+
+	*base  = (csbase & base_bits) << addr_shift;
+
+	*mask  = ~0ULL;
+	/* poke holes for the csmask */
+	*mask &= ~(mask_bits << addr_shift);
+	/* OR them in */
+	*mask |= (csmask & mask_bits) << addr_shift;
+}
+
+#define for_each_chip_select(i, dct, pvt) \
+	for (i = 0; i < pvt->csels[dct].b_cnt; i++)
+
+#define chip_select_base(i, dct, pvt) \
+	pvt->csels[dct].csbases[i]
+
+#define for_each_chip_select_mask(i, dct, pvt) \
+	for (i = 0; i < pvt->csels[dct].m_cnt; i++)
+
+/*
+ * @input_addr is an InputAddr associated with the node given by mci. Return the
+ * csrow that input_addr maps to, or -1 on failure (no csrow claims input_addr).
+ */
+static int input_addr_to_csrow(struct mem_ctl_info *mci, u64 input_addr)
+{
+	struct amd64_pvt *pvt;
+	int csrow;
+	u64 base, mask;
+
+	pvt = mci->pvt_info;
+
+	for_each_chip_select(csrow, 0, pvt) {
+		if (!csrow_enabled(csrow, 0, pvt))
+			continue;
+
+		get_cs_base_and_mask(pvt, csrow, 0, &base, &mask);
+
+		mask = ~mask;
+
+		if ((input_addr & mask) == (base & mask)) {
+			edac_dbg(2, "InputAddr 0x%lx matches csrow %d (node %d)\n",
+				 (unsigned long)input_addr, csrow,
+				 pvt->mc_node_id);
+
+			return csrow;
+		}
+	}
+	edac_dbg(2, "no matching csrow for InputAddr 0x%lx (MC node %d)\n",
+		 (unsigned long)input_addr, pvt->mc_node_id);
+
+	return -1;
+}
+
+/*
+ * Obtain info from the DRAM Hole Address Register (section 3.4.8, pub #26094)
+ * for the node represented by mci. Info is passed back in *hole_base,
+ * *hole_offset, and *hole_size.  Function returns 0 if info is valid or 1 if
+ * info is invalid. Info may be invalid for either of the following reasons:
+ *
+ * - The revision of the node is not E or greater.  In this case, the DRAM Hole
+ *   Address Register does not exist.
+ *
+ * - The DramHoleValid bit is cleared in the DRAM Hole Address Register,
+ *   indicating that its contents are not valid.
+ *
+ * The values passed back in *hole_base, *hole_offset, and *hole_size are
+ * complete 32-bit values despite the fact that the bitfields in the DHAR
+ * only represent bits 31-24 of the base and offset values.
+ */
+int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
+			     u64 *hole_offset, u64 *hole_size)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+
+	/* only revE and later have the DRAM Hole Address Register */
+	if (pvt->fam == 0xf && pvt->ext_model < K8_REV_E) {
+		edac_dbg(1, "  revision %d for node %d does not support DHAR\n",
+			 pvt->ext_model, pvt->mc_node_id);
+		return 1;
+	}
+
+	/* valid for Fam10h and above */
+	if (pvt->fam >= 0x10 && !dhar_mem_hoist_valid(pvt)) {
+		edac_dbg(1, "  Dram Memory Hoisting is DISABLED on this system\n");
+		return 1;
+	}
+
+	if (!dhar_valid(pvt)) {
+		edac_dbg(1, "  Dram Memory Hoisting is DISABLED on this node %d\n",
+			 pvt->mc_node_id);
+		return 1;
+	}
+
+	/* This node has Memory Hoisting */
+
+	/* +------------------+--------------------+--------------------+-----
+	 * | memory           | DRAM hole          | relocated          |
+	 * | [0, (x - 1)]     | [x, 0xffffffff]    | addresses from     |
+	 * |                  |                    | DRAM hole          |
+	 * |                  |                    | [0x100000000,      |
+	 * |                  |                    |  (0x100000000+     |
+	 * |                  |                    |   (0xffffffff-x))] |
+	 * +------------------+--------------------+--------------------+-----
+	 *
+	 * Above is a diagram of physical memory showing the DRAM hole and the
+	 * relocated addresses from the DRAM hole.  As shown, the DRAM hole
+	 * starts at address x (the base address) and extends through address
+	 * 0xffffffff.  The DRAM Hole Address Register (DHAR) relocates the
+	 * addresses in the hole so that they start at 0x100000000.
+	 */
+
+	*hole_base = dhar_base(pvt);
+	*hole_size = (1ULL << 32) - *hole_base;
+
+	*hole_offset = (pvt->fam > 0xf) ? f10_dhar_offset(pvt)
+					: k8_dhar_offset(pvt);
+
+	edac_dbg(1, "  DHAR info for node %d base 0x%lx offset 0x%lx size 0x%lx\n",
+		 pvt->mc_node_id, (unsigned long)*hole_base,
+		 (unsigned long)*hole_offset, (unsigned long)*hole_size);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(amd64_get_dram_hole_info);
+
+/*
+ * Return the DramAddr that the SysAddr given by @sys_addr maps to.  It is
+ * assumed that sys_addr maps to the node given by mci.
+ *
+ * The first part of section 3.4.4 (p. 70) shows how the DRAM Base (section
+ * 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers are used to translate a
+ * SysAddr to a DramAddr. If the DRAM Hole Address Register (DHAR) is enabled,
+ * then it is also involved in translating a SysAddr to a DramAddr. Sections
+ * 3.4.8 and 3.5.8.2 describe the DHAR and how it is used for memory hoisting.
+ * These parts of the documentation are unclear. I interpret them as follows:
+ *
+ * When node n receives a SysAddr, it processes the SysAddr as follows:
+ *
+ * 1. It extracts the DRAMBase and DRAMLimit values from the DRAM Base and DRAM
+ *    Limit registers for node n. If the SysAddr is not within the range
+ *    specified by the base and limit values, then node n ignores the Sysaddr
+ *    (since it does not map to node n). Otherwise continue to step 2 below.
+ *
+ * 2. If the DramHoleValid bit of the DHAR for node n is clear, the DHAR is
+ *    disabled so skip to step 3 below. Otherwise see if the SysAddr is within
+ *    the range of relocated addresses (starting at 0x100000000) from the DRAM
+ *    hole. If not, skip to step 3 below. Else get the value of the
+ *    DramHoleOffset field from the DHAR. To obtain the DramAddr, subtract the
+ *    offset defined by this value from the SysAddr.
+ *
+ * 3. Obtain the base address for node n from the DRAMBase field of the DRAM
+ *    Base register for node n. To obtain the DramAddr, subtract the base
+ *    address from the SysAddr, as shown near the start of section 3.4.4 (p.70).
+ */
+static u64 sys_addr_to_dram_addr(struct mem_ctl_info *mci, u64 sys_addr)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	u64 dram_base, hole_base, hole_offset, hole_size, dram_addr;
+	int ret;
+
+	dram_base = get_dram_base(pvt, pvt->mc_node_id);
+
+	ret = amd64_get_dram_hole_info(mci, &hole_base, &hole_offset,
+				      &hole_size);
+	if (!ret) {
+		if ((sys_addr >= (1ULL << 32)) &&
+		    (sys_addr < ((1ULL << 32) + hole_size))) {
+			/* use DHAR to translate SysAddr to DramAddr */
+			dram_addr = sys_addr - hole_offset;
+
+			edac_dbg(2, "using DHAR to translate SysAddr 0x%lx to DramAddr 0x%lx\n",
+				 (unsigned long)sys_addr,
+				 (unsigned long)dram_addr);
+
+			return dram_addr;
+		}
+	}
+
+	/*
+	 * Translate the SysAddr to a DramAddr as shown near the start of
+	 * section 3.4.4 (p. 70).  Although sys_addr is a 64-bit value, the k8
+	 * only deals with 40-bit values.  Therefore we discard bits 63-40 of
+	 * sys_addr below.  If bit 39 of sys_addr is 1 then the bits we
+	 * discard are all 1s.  Otherwise the bits we discard are all 0s.  See
+	 * section 3.4.2 of AMD publication 24592: AMD x86-64 Architecture
+	 * Programmer's Manual Volume 1 Application Programming.
+	 */
+	dram_addr = (sys_addr & GENMASK_ULL(39, 0)) - dram_base;
+
+	edac_dbg(2, "using DRAM Base register to translate SysAddr 0x%lx to DramAddr 0x%lx\n",
+		 (unsigned long)sys_addr, (unsigned long)dram_addr);
+	return dram_addr;
+}
+
+/*
+ * @intlv_en is the value of the IntlvEn field from a DRAM Base register
+ * (section 3.4.4.1).  Return the number of bits from a SysAddr that are used
+ * for node interleaving.
+ */
+static int num_node_interleave_bits(unsigned intlv_en)
+{
+	static const int intlv_shift_table[] = { 0, 1, 0, 2, 0, 0, 0, 3 };
+	int n;
+
+	BUG_ON(intlv_en > 7);
+	n = intlv_shift_table[intlv_en];
+	return n;
+}
+
+/* Translate the DramAddr given by @dram_addr to an InputAddr. */
+static u64 dram_addr_to_input_addr(struct mem_ctl_info *mci, u64 dram_addr)
+{
+	struct amd64_pvt *pvt;
+	int intlv_shift;
+	u64 input_addr;
+
+	pvt = mci->pvt_info;
+
+	/*
+	 * See the start of section 3.4.4 (p. 70, BKDG #26094, K8, revA-E)
+	 * concerning translating a DramAddr to an InputAddr.
+	 */
+	intlv_shift = num_node_interleave_bits(dram_intlv_en(pvt, 0));
+	input_addr = ((dram_addr >> intlv_shift) & GENMASK_ULL(35, 12)) +
+		      (dram_addr & 0xfff);
+
+	edac_dbg(2, "  Intlv Shift=%d DramAddr=0x%lx maps to InputAddr=0x%lx\n",
+		 intlv_shift, (unsigned long)dram_addr,
+		 (unsigned long)input_addr);
+
+	return input_addr;
+}
+
+/*
+ * Translate the SysAddr represented by @sys_addr to an InputAddr.  It is
+ * assumed that @sys_addr maps to the node given by mci.
+ */
+static u64 sys_addr_to_input_addr(struct mem_ctl_info *mci, u64 sys_addr)
+{
+	u64 input_addr;
+
+	input_addr =
+	    dram_addr_to_input_addr(mci, sys_addr_to_dram_addr(mci, sys_addr));
+
+	edac_dbg(2, "SysAddr 0x%lx translates to InputAddr 0x%lx\n",
+		 (unsigned long)sys_addr, (unsigned long)input_addr);
+
+	return input_addr;
+}
+
+/* Map the Error address to a PAGE and PAGE OFFSET. */
+static inline void error_address_to_page_and_offset(u64 error_address,
+						    struct err_info *err)
+{
+	err->page = (u32) (error_address >> PAGE_SHIFT);
+	err->offset = ((u32) error_address) & ~PAGE_MASK;
+}
+
+/*
+ * @sys_addr is an error address (a SysAddr) extracted from the MCA NB Address
+ * Low (section 3.6.4.5) and MCA NB Address High (section 3.6.4.6) registers
+ * of a node that detected an ECC memory error.  mci represents the node that
+ * the error address maps to (possibly different from the node that detected
+ * the error).  Return the number of the csrow that sys_addr maps to, or -1 on
+ * error.
+ */
+static int sys_addr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr)
+{
+	int csrow;
+
+	csrow = input_addr_to_csrow(mci, sys_addr_to_input_addr(mci, sys_addr));
+
+	if (csrow == -1)
+		amd64_mc_err(mci, "Failed to translate InputAddr to csrow for "
+				  "address 0x%lx\n", (unsigned long)sys_addr);
+	return csrow;
+}
+
+static int get_channel_from_ecc_syndrome(struct mem_ctl_info *, u16);
+
+/*
+ * Determine if the DIMMs have ECC enabled. ECC is enabled ONLY if all the DIMMs
+ * are ECC capable.
+ */
+static unsigned long determine_edac_cap(struct amd64_pvt *pvt)
+{
+	unsigned long edac_cap = EDAC_FLAG_NONE;
+	u8 bit;
+
+	if (pvt->umc) {
+		u8 i, umc_en_mask = 0, dimm_ecc_en_mask = 0;
+
+		for (i = 0; i < NUM_UMCS; i++) {
+			if (!(pvt->umc[i].sdp_ctrl & UMC_SDP_INIT))
+				continue;
+
+			umc_en_mask |= BIT(i);
+
+			/* UMC Configuration bit 12 (DimmEccEn) */
+			if (pvt->umc[i].umc_cfg & BIT(12))
+				dimm_ecc_en_mask |= BIT(i);
+		}
+
+		if (umc_en_mask == dimm_ecc_en_mask)
+			edac_cap = EDAC_FLAG_SECDED;
+	} else {
+		bit = (pvt->fam > 0xf || pvt->ext_model >= K8_REV_F)
+			? 19
+			: 17;
+
+		if (pvt->dclr0 & BIT(bit))
+			edac_cap = EDAC_FLAG_SECDED;
+	}
+
+	return edac_cap;
+}
+
+static void debug_display_dimm_sizes(struct amd64_pvt *, u8);
+
+static void debug_dump_dramcfg_low(struct amd64_pvt *pvt, u32 dclr, int chan)
+{
+	edac_dbg(1, "F2x%d90 (DRAM Cfg Low): 0x%08x\n", chan, dclr);
+
+	if (pvt->dram_type == MEM_LRDDR3) {
+		u32 dcsm = pvt->csels[chan].csmasks[0];
+		/*
+		 * It's assumed all LRDIMMs in a DCT are going to be of
+		 * same 'type' until proven otherwise. So, use a cs
+		 * value of '0' here to get dcsm value.
+		 */
+		edac_dbg(1, " LRDIMM %dx rank multiply\n", (dcsm & 0x3));
+	}
+
+	edac_dbg(1, "All DIMMs support ECC:%s\n",
+		    (dclr & BIT(19)) ? "yes" : "no");
+
+
+	edac_dbg(1, "  PAR/ERR parity: %s\n",
+		 (dclr & BIT(8)) ?  "enabled" : "disabled");
+
+	if (pvt->fam == 0x10)
+		edac_dbg(1, "  DCT 128bit mode width: %s\n",
+			 (dclr & BIT(11)) ?  "128b" : "64b");
+
+	edac_dbg(1, "  x4 logical DIMMs present: L0: %s L1: %s L2: %s L3: %s\n",
+		 (dclr & BIT(12)) ?  "yes" : "no",
+		 (dclr & BIT(13)) ?  "yes" : "no",
+		 (dclr & BIT(14)) ?  "yes" : "no",
+		 (dclr & BIT(15)) ?  "yes" : "no");
+}
+
+static void debug_display_dimm_sizes_df(struct amd64_pvt *pvt, u8 ctrl)
+{
+	int dimm, size0, size1, cs0, cs1;
+
+	edac_printk(KERN_DEBUG, EDAC_MC, "UMC%d chip selects:\n", ctrl);
+
+	for (dimm = 0; dimm < 4; dimm++) {
+		size0 = 0;
+		cs0 = dimm * 2;
+
+		if (csrow_enabled(cs0, ctrl, pvt))
+			size0 = pvt->ops->dbam_to_cs(pvt, ctrl, 0, cs0);
+
+		size1 = 0;
+		cs1 = dimm * 2 + 1;
+
+		if (csrow_enabled(cs1, ctrl, pvt))
+			size1 = pvt->ops->dbam_to_cs(pvt, ctrl, 0, cs1);
+
+		amd64_info(EDAC_MC ": %d: %5dMB %d: %5dMB\n",
+				cs0,	size0,
+				cs1,	size1);
+	}
+}
+
+static void __dump_misc_regs_df(struct amd64_pvt *pvt)
+{
+	struct amd64_umc *umc;
+	u32 i, tmp, umc_base;
+
+	for (i = 0; i < NUM_UMCS; i++) {
+		umc_base = get_umc_base(i);
+		umc = &pvt->umc[i];
+
+		edac_dbg(1, "UMC%d DIMM cfg: 0x%x\n", i, umc->dimm_cfg);
+		edac_dbg(1, "UMC%d UMC cfg: 0x%x\n", i, umc->umc_cfg);
+		edac_dbg(1, "UMC%d SDP ctrl: 0x%x\n", i, umc->sdp_ctrl);
+		edac_dbg(1, "UMC%d ECC ctrl: 0x%x\n", i, umc->ecc_ctrl);
+
+		amd_smn_read(pvt->mc_node_id, umc_base + UMCCH_ECC_BAD_SYMBOL, &tmp);
+		edac_dbg(1, "UMC%d ECC bad symbol: 0x%x\n", i, tmp);
+
+		amd_smn_read(pvt->mc_node_id, umc_base + UMCCH_UMC_CAP, &tmp);
+		edac_dbg(1, "UMC%d UMC cap: 0x%x\n", i, tmp);
+		edac_dbg(1, "UMC%d UMC cap high: 0x%x\n", i, umc->umc_cap_hi);
+
+		edac_dbg(1, "UMC%d ECC capable: %s, ChipKill ECC capable: %s\n",
+				i, (umc->umc_cap_hi & BIT(30)) ? "yes" : "no",
+				    (umc->umc_cap_hi & BIT(31)) ? "yes" : "no");
+		edac_dbg(1, "UMC%d All DIMMs support ECC: %s\n",
+				i, (umc->umc_cfg & BIT(12)) ? "yes" : "no");
+		edac_dbg(1, "UMC%d x4 DIMMs present: %s\n",
+				i, (umc->dimm_cfg & BIT(6)) ? "yes" : "no");
+		edac_dbg(1, "UMC%d x16 DIMMs present: %s\n",
+				i, (umc->dimm_cfg & BIT(7)) ? "yes" : "no");
+
+		if (pvt->dram_type == MEM_LRDDR4) {
+			amd_smn_read(pvt->mc_node_id, umc_base + UMCCH_ADDR_CFG, &tmp);
+			edac_dbg(1, "UMC%d LRDIMM %dx rank multiply\n",
+					i, 1 << ((tmp >> 4) & 0x3));
+		}
+
+		debug_display_dimm_sizes_df(pvt, i);
+	}
+
+	edac_dbg(1, "F0x104 (DRAM Hole Address): 0x%08x, base: 0x%08x\n",
+		 pvt->dhar, dhar_base(pvt));
+}
+
+/* Display and decode various NB registers for debug purposes. */
+static void __dump_misc_regs(struct amd64_pvt *pvt)
+{
+	edac_dbg(1, "F3xE8 (NB Cap): 0x%08x\n", pvt->nbcap);
+
+	edac_dbg(1, "  NB two channel DRAM capable: %s\n",
+		 (pvt->nbcap & NBCAP_DCT_DUAL) ? "yes" : "no");
+
+	edac_dbg(1, "  ECC capable: %s, ChipKill ECC capable: %s\n",
+		 (pvt->nbcap & NBCAP_SECDED) ? "yes" : "no",
+		 (pvt->nbcap & NBCAP_CHIPKILL) ? "yes" : "no");
+
+	debug_dump_dramcfg_low(pvt, pvt->dclr0, 0);
+
+	edac_dbg(1, "F3xB0 (Online Spare): 0x%08x\n", pvt->online_spare);
+
+	edac_dbg(1, "F1xF0 (DRAM Hole Address): 0x%08x, base: 0x%08x, offset: 0x%08x\n",
+		 pvt->dhar, dhar_base(pvt),
+		 (pvt->fam == 0xf) ? k8_dhar_offset(pvt)
+				   : f10_dhar_offset(pvt));
+
+	debug_display_dimm_sizes(pvt, 0);
+
+	/* everything below this point is Fam10h and above */
+	if (pvt->fam == 0xf)
+		return;
+
+	debug_display_dimm_sizes(pvt, 1);
+
+	/* Only if NOT ganged does dclr1 have valid info */
+	if (!dct_ganging_enabled(pvt))
+		debug_dump_dramcfg_low(pvt, pvt->dclr1, 1);
+}
+
+/* Display and decode various NB registers for debug purposes. */
+static void dump_misc_regs(struct amd64_pvt *pvt)
+{
+	if (pvt->umc)
+		__dump_misc_regs_df(pvt);
+	else
+		__dump_misc_regs(pvt);
+
+	edac_dbg(1, "  DramHoleValid: %s\n", dhar_valid(pvt) ? "yes" : "no");
+
+	amd64_info("using %s syndromes.\n",
+			((pvt->ecc_sym_sz == 8) ? "x8" : "x4"));
+}
+
+/*
+ * See BKDG, F2x[1,0][5C:40], F2[1,0][6C:60]
+ */
+static void prep_chip_selects(struct amd64_pvt *pvt)
+{
+	if (pvt->fam == 0xf && pvt->ext_model < K8_REV_F) {
+		pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 8;
+		pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 8;
+	} else if (pvt->fam == 0x15 && pvt->model == 0x30) {
+		pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 4;
+		pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 2;
+	} else {
+		pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 8;
+		pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 4;
+	}
+}
+
+/*
+ * Function 2 Offset F10_DCSB0; read in the DCS Base and DCS Mask registers
+ */
+static void read_dct_base_mask(struct amd64_pvt *pvt)
+{
+	int base_reg0, base_reg1, mask_reg0, mask_reg1, cs;
+
+	prep_chip_selects(pvt);
+
+	if (pvt->umc) {
+		base_reg0 = get_umc_base(0) + UMCCH_BASE_ADDR;
+		base_reg1 = get_umc_base(1) + UMCCH_BASE_ADDR;
+		mask_reg0 = get_umc_base(0) + UMCCH_ADDR_MASK;
+		mask_reg1 = get_umc_base(1) + UMCCH_ADDR_MASK;
+	} else {
+		base_reg0 = DCSB0;
+		base_reg1 = DCSB1;
+		mask_reg0 = DCSM0;
+		mask_reg1 = DCSM1;
+	}
+
+	for_each_chip_select(cs, 0, pvt) {
+		int reg0   = base_reg0 + (cs * 4);
+		int reg1   = base_reg1 + (cs * 4);
+		u32 *base0 = &pvt->csels[0].csbases[cs];
+		u32 *base1 = &pvt->csels[1].csbases[cs];
+
+		if (pvt->umc) {
+			if (!amd_smn_read(pvt->mc_node_id, reg0, base0))
+				edac_dbg(0, "  DCSB0[%d]=0x%08x reg: 0x%x\n",
+					 cs, *base0, reg0);
+
+			if (!amd_smn_read(pvt->mc_node_id, reg1, base1))
+				edac_dbg(0, "  DCSB1[%d]=0x%08x reg: 0x%x\n",
+					 cs, *base1, reg1);
+		} else {
+			if (!amd64_read_dct_pci_cfg(pvt, 0, reg0, base0))
+				edac_dbg(0, "  DCSB0[%d]=0x%08x reg: F2x%x\n",
+					 cs, *base0, reg0);
+
+			if (pvt->fam == 0xf)
+				continue;
+
+			if (!amd64_read_dct_pci_cfg(pvt, 1, reg0, base1))
+				edac_dbg(0, "  DCSB1[%d]=0x%08x reg: F2x%x\n",
+					 cs, *base1, (pvt->fam == 0x10) ? reg1
+								: reg0);
+		}
+	}
+
+	for_each_chip_select_mask(cs, 0, pvt) {
+		int reg0   = mask_reg0 + (cs * 4);
+		int reg1   = mask_reg1 + (cs * 4);
+		u32 *mask0 = &pvt->csels[0].csmasks[cs];
+		u32 *mask1 = &pvt->csels[1].csmasks[cs];
+
+		if (pvt->umc) {
+			if (!amd_smn_read(pvt->mc_node_id, reg0, mask0))
+				edac_dbg(0, "    DCSM0[%d]=0x%08x reg: 0x%x\n",
+					 cs, *mask0, reg0);
+
+			if (!amd_smn_read(pvt->mc_node_id, reg1, mask1))
+				edac_dbg(0, "    DCSM1[%d]=0x%08x reg: 0x%x\n",
+					 cs, *mask1, reg1);
+		} else {
+			if (!amd64_read_dct_pci_cfg(pvt, 0, reg0, mask0))
+				edac_dbg(0, "    DCSM0[%d]=0x%08x reg: F2x%x\n",
+					 cs, *mask0, reg0);
+
+			if (pvt->fam == 0xf)
+				continue;
+
+			if (!amd64_read_dct_pci_cfg(pvt, 1, reg0, mask1))
+				edac_dbg(0, "    DCSM1[%d]=0x%08x reg: F2x%x\n",
+					 cs, *mask1, (pvt->fam == 0x10) ? reg1
+								: reg0);
+		}
+	}
+}
+
+static void determine_memory_type(struct amd64_pvt *pvt)
+{
+	u32 dram_ctrl, dcsm;
+
+	switch (pvt->fam) {
+	case 0xf:
+		if (pvt->ext_model >= K8_REV_F)
+			goto ddr3;
+
+		pvt->dram_type = (pvt->dclr0 & BIT(18)) ? MEM_DDR : MEM_RDDR;
+		return;
+
+	case 0x10:
+		if (pvt->dchr0 & DDR3_MODE)
+			goto ddr3;
+
+		pvt->dram_type = (pvt->dclr0 & BIT(16)) ? MEM_DDR2 : MEM_RDDR2;
+		return;
+
+	case 0x15:
+		if (pvt->model < 0x60)
+			goto ddr3;
+
+		/*
+		 * Model 0x60h needs special handling:
+		 *
+		 * We use a Chip Select value of '0' to obtain dcsm.
+		 * Theoretically, it is possible to populate LRDIMMs of different
+		 * 'Rank' value on a DCT. But this is not the common case. So,
+		 * it's reasonable to assume all DIMMs are going to be of same
+		 * 'type' until proven otherwise.
+		 */
+		amd64_read_dct_pci_cfg(pvt, 0, DRAM_CONTROL, &dram_ctrl);
+		dcsm = pvt->csels[0].csmasks[0];
+
+		if (((dram_ctrl >> 8) & 0x7) == 0x2)
+			pvt->dram_type = MEM_DDR4;
+		else if (pvt->dclr0 & BIT(16))
+			pvt->dram_type = MEM_DDR3;
+		else if (dcsm & 0x3)
+			pvt->dram_type = MEM_LRDDR3;
+		else
+			pvt->dram_type = MEM_RDDR3;
+
+		return;
+
+	case 0x16:
+		goto ddr3;
+
+	case 0x17:
+		if ((pvt->umc[0].dimm_cfg | pvt->umc[1].dimm_cfg) & BIT(5))
+			pvt->dram_type = MEM_LRDDR4;
+		else if ((pvt->umc[0].dimm_cfg | pvt->umc[1].dimm_cfg) & BIT(4))
+			pvt->dram_type = MEM_RDDR4;
+		else
+			pvt->dram_type = MEM_DDR4;
+		return;
+
+	default:
+		WARN(1, KERN_ERR "%s: Family??? 0x%x\n", __func__, pvt->fam);
+		pvt->dram_type = MEM_EMPTY;
+	}
+	return;
+
+ddr3:
+	pvt->dram_type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3;
+}
+
+/* Get the number of DCT channels the memory controller is using. */
+static int k8_early_channel_count(struct amd64_pvt *pvt)
+{
+	int flag;
+
+	if (pvt->ext_model >= K8_REV_F)
+		/* RevF (NPT) and later */
+		flag = pvt->dclr0 & WIDTH_128;
+	else
+		/* RevE and earlier */
+		flag = pvt->dclr0 & REVE_WIDTH_128;
+
+	/* not used */
+	pvt->dclr1 = 0;
+
+	return (flag) ? 2 : 1;
+}
+
+/* On F10h and later ErrAddr is MC4_ADDR[47:1] */
+static u64 get_error_address(struct amd64_pvt *pvt, struct mce *m)
+{
+	u16 mce_nid = amd_get_nb_id(m->extcpu);
+	struct mem_ctl_info *mci;
+	u8 start_bit = 1;
+	u8 end_bit   = 47;
+	u64 addr;
+
+	mci = edac_mc_find(mce_nid);
+	if (!mci)
+		return 0;
+
+	pvt = mci->pvt_info;
+
+	if (pvt->fam == 0xf) {
+		start_bit = 3;
+		end_bit   = 39;
+	}
+
+	addr = m->addr & GENMASK_ULL(end_bit, start_bit);
+
+	/*
+	 * Erratum 637 workaround
+	 */
+	if (pvt->fam == 0x15) {
+		u64 cc6_base, tmp_addr;
+		u32 tmp;
+		u8 intlv_en;
+
+		if ((addr & GENMASK_ULL(47, 24)) >> 24 != 0x00fdf7)
+			return addr;
+
+
+		amd64_read_pci_cfg(pvt->F1, DRAM_LOCAL_NODE_LIM, &tmp);
+		intlv_en = tmp >> 21 & 0x7;
+
+		/* add [47:27] + 3 trailing bits */
+		cc6_base  = (tmp & GENMASK_ULL(20, 0)) << 3;
+
+		/* reverse and add DramIntlvEn */
+		cc6_base |= intlv_en ^ 0x7;
+
+		/* pin at [47:24] */
+		cc6_base <<= 24;
+
+		if (!intlv_en)
+			return cc6_base | (addr & GENMASK_ULL(23, 0));
+
+		amd64_read_pci_cfg(pvt->F1, DRAM_LOCAL_NODE_BASE, &tmp);
+
+							/* faster log2 */
+		tmp_addr  = (addr & GENMASK_ULL(23, 12)) << __fls(intlv_en + 1);
+
+		/* OR DramIntlvSel into bits [14:12] */
+		tmp_addr |= (tmp & GENMASK_ULL(23, 21)) >> 9;
+
+		/* add remaining [11:0] bits from original MC4_ADDR */
+		tmp_addr |= addr & GENMASK_ULL(11, 0);
+
+		return cc6_base | tmp_addr;
+	}
+
+	return addr;
+}
+
+static struct pci_dev *pci_get_related_function(unsigned int vendor,
+						unsigned int device,
+						struct pci_dev *related)
+{
+	struct pci_dev *dev = NULL;
+
+	while ((dev = pci_get_device(vendor, device, dev))) {
+		if (pci_domain_nr(dev->bus) == pci_domain_nr(related->bus) &&
+		    (dev->bus->number == related->bus->number) &&
+		    (PCI_SLOT(dev->devfn) == PCI_SLOT(related->devfn)))
+			break;
+	}
+
+	return dev;
+}
+
+static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range)
+{
+	struct amd_northbridge *nb;
+	struct pci_dev *f1 = NULL;
+	unsigned int pci_func;
+	int off = range << 3;
+	u32 llim;
+
+	amd64_read_pci_cfg(pvt->F1, DRAM_BASE_LO + off,  &pvt->ranges[range].base.lo);
+	amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_LO + off, &pvt->ranges[range].lim.lo);
+
+	if (pvt->fam == 0xf)
+		return;
+
+	if (!dram_rw(pvt, range))
+		return;
+
+	amd64_read_pci_cfg(pvt->F1, DRAM_BASE_HI + off,  &pvt->ranges[range].base.hi);
+	amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_HI + off, &pvt->ranges[range].lim.hi);
+
+	/* F15h: factor in CC6 save area by reading dst node's limit reg */
+	if (pvt->fam != 0x15)
+		return;
+
+	nb = node_to_amd_nb(dram_dst_node(pvt, range));
+	if (WARN_ON(!nb))
+		return;
+
+	if (pvt->model == 0x60)
+		pci_func = PCI_DEVICE_ID_AMD_15H_M60H_NB_F1;
+	else if (pvt->model == 0x30)
+		pci_func = PCI_DEVICE_ID_AMD_15H_M30H_NB_F1;
+	else
+		pci_func = PCI_DEVICE_ID_AMD_15H_NB_F1;
+
+	f1 = pci_get_related_function(nb->misc->vendor, pci_func, nb->misc);
+	if (WARN_ON(!f1))
+		return;
+
+	amd64_read_pci_cfg(f1, DRAM_LOCAL_NODE_LIM, &llim);
+
+	pvt->ranges[range].lim.lo &= GENMASK_ULL(15, 0);
+
+				    /* {[39:27],111b} */
+	pvt->ranges[range].lim.lo |= ((llim & 0x1fff) << 3 | 0x7) << 16;
+
+	pvt->ranges[range].lim.hi &= GENMASK_ULL(7, 0);
+
+				    /* [47:40] */
+	pvt->ranges[range].lim.hi |= llim >> 13;
+
+	pci_dev_put(f1);
+}
+
+static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr,
+				    struct err_info *err)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+
+	error_address_to_page_and_offset(sys_addr, err);
+
+	/*
+	 * Find out which node the error address belongs to. This may be
+	 * different from the node that detected the error.
+	 */
+	err->src_mci = find_mc_by_sys_addr(mci, sys_addr);
+	if (!err->src_mci) {
+		amd64_mc_err(mci, "failed to map error addr 0x%lx to a node\n",
+			     (unsigned long)sys_addr);
+		err->err_code = ERR_NODE;
+		return;
+	}
+
+	/* Now map the sys_addr to a CSROW */
+	err->csrow = sys_addr_to_csrow(err->src_mci, sys_addr);
+	if (err->csrow < 0) {
+		err->err_code = ERR_CSROW;
+		return;
+	}
+
+	/* CHIPKILL enabled */
+	if (pvt->nbcfg & NBCFG_CHIPKILL) {
+		err->channel = get_channel_from_ecc_syndrome(mci, err->syndrome);
+		if (err->channel < 0) {
+			/*
+			 * Syndrome didn't map, so we don't know which of the
+			 * 2 DIMMs is in error. So we need to ID 'both' of them
+			 * as suspect.
+			 */
+			amd64_mc_warn(err->src_mci, "unknown syndrome 0x%04x - "
+				      "possible error reporting race\n",
+				      err->syndrome);
+			err->err_code = ERR_CHANNEL;
+			return;
+		}
+	} else {
+		/*
+		 * non-chipkill ecc mode
+		 *
+		 * The k8 documentation is unclear about how to determine the
+		 * channel number when using non-chipkill memory.  This method
+		 * was obtained from email communication with someone at AMD.
+		 * (Wish the email was placed in this comment - norsk)
+		 */
+		err->channel = ((sys_addr & BIT(3)) != 0);
+	}
+}
+
+static int ddr2_cs_size(unsigned i, bool dct_width)
+{
+	unsigned shift = 0;
+
+	if (i <= 2)
+		shift = i;
+	else if (!(i & 0x1))
+		shift = i >> 1;
+	else
+		shift = (i + 1) >> 1;
+
+	return 128 << (shift + !!dct_width);
+}
+
+static int k8_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
+				  unsigned cs_mode, int cs_mask_nr)
+{
+	u32 dclr = dct ? pvt->dclr1 : pvt->dclr0;
+
+	if (pvt->ext_model >= K8_REV_F) {
+		WARN_ON(cs_mode > 11);
+		return ddr2_cs_size(cs_mode, dclr & WIDTH_128);
+	}
+	else if (pvt->ext_model >= K8_REV_D) {
+		unsigned diff;
+		WARN_ON(cs_mode > 10);
+
+		/*
+		 * the below calculation, besides trying to win an obfuscated C
+		 * contest, maps cs_mode values to DIMM chip select sizes. The
+		 * mappings are:
+		 *
+		 * cs_mode	CS size (mb)
+		 * =======	============
+		 * 0		32
+		 * 1		64
+		 * 2		128
+		 * 3		128
+		 * 4		256
+		 * 5		512
+		 * 6		256
+		 * 7		512
+		 * 8		1024
+		 * 9		1024
+		 * 10		2048
+		 *
+		 * Basically, it calculates a value with which to shift the
+		 * smallest CS size of 32MB.
+		 *
+		 * ddr[23]_cs_size have a similar purpose.
+		 */
+		diff = cs_mode/3 + (unsigned)(cs_mode > 5);
+
+		return 32 << (cs_mode - diff);
+	}
+	else {
+		WARN_ON(cs_mode > 6);
+		return 32 << cs_mode;
+	}
+}
+
+/*
+ * Get the number of DCT channels in use.
+ *
+ * Return:
+ *	number of Memory Channels in operation
+ * Pass back:
+ *	contents of the DCL0_LOW register
+ */
+static int f1x_early_channel_count(struct amd64_pvt *pvt)
+{
+	int i, j, channels = 0;
+
+	/* On F10h, if we are in 128 bit mode, then we are using 2 channels */
+	if (pvt->fam == 0x10 && (pvt->dclr0 & WIDTH_128))
+		return 2;
+
+	/*
+	 * Need to check if in unganged mode: In such, there are 2 channels,
+	 * but they are not in 128 bit mode and thus the above 'dclr0' status
+	 * bit will be OFF.
+	 *
+	 * Need to check DCT0[0] and DCT1[0] to see if only one of them has
+	 * their CSEnable bit on. If so, then SINGLE DIMM case.
+	 */
+	edac_dbg(0, "Data width is not 128 bits - need more decoding\n");
+
+	/*
+	 * Check DRAM Bank Address Mapping values for each DIMM to see if there
+	 * is more than just one DIMM present in unganged mode. Need to check
+	 * both controllers since DIMMs can be placed in either one.
+	 */
+	for (i = 0; i < 2; i++) {
+		u32 dbam = (i ? pvt->dbam1 : pvt->dbam0);
+
+		for (j = 0; j < 4; j++) {
+			if (DBAM_DIMM(j, dbam) > 0) {
+				channels++;
+				break;
+			}
+		}
+	}
+
+	if (channels > 2)
+		channels = 2;
+
+	amd64_info("MCT channel count: %d\n", channels);
+
+	return channels;
+}
+
+static int f17_early_channel_count(struct amd64_pvt *pvt)
+{
+	int i, channels = 0;
+
+	/* SDP Control bit 31 (SdpInit) is clear for unused UMC channels */
+	for (i = 0; i < NUM_UMCS; i++)
+		channels += !!(pvt->umc[i].sdp_ctrl & UMC_SDP_INIT);
+
+	amd64_info("MCT channel count: %d\n", channels);
+
+	return channels;
+}
+
+static int ddr3_cs_size(unsigned i, bool dct_width)
+{
+	unsigned shift = 0;
+	int cs_size = 0;
+
+	if (i == 0 || i == 3 || i == 4)
+		cs_size = -1;
+	else if (i <= 2)
+		shift = i;
+	else if (i == 12)
+		shift = 7;
+	else if (!(i & 0x1))
+		shift = i >> 1;
+	else
+		shift = (i + 1) >> 1;
+
+	if (cs_size != -1)
+		cs_size = (128 * (1 << !!dct_width)) << shift;
+
+	return cs_size;
+}
+
+static int ddr3_lrdimm_cs_size(unsigned i, unsigned rank_multiply)
+{
+	unsigned shift = 0;
+	int cs_size = 0;
+
+	if (i < 4 || i == 6)
+		cs_size = -1;
+	else if (i == 12)
+		shift = 7;
+	else if (!(i & 0x1))
+		shift = i >> 1;
+	else
+		shift = (i + 1) >> 1;
+
+	if (cs_size != -1)
+		cs_size = rank_multiply * (128 << shift);
+
+	return cs_size;
+}
+
+static int ddr4_cs_size(unsigned i)
+{
+	int cs_size = 0;
+
+	if (i == 0)
+		cs_size = -1;
+	else if (i == 1)
+		cs_size = 1024;
+	else
+		/* Min cs_size = 1G */
+		cs_size = 1024 * (1 << (i >> 1));
+
+	return cs_size;
+}
+
+static int f10_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
+				   unsigned cs_mode, int cs_mask_nr)
+{
+	u32 dclr = dct ? pvt->dclr1 : pvt->dclr0;
+
+	WARN_ON(cs_mode > 11);
+
+	if (pvt->dchr0 & DDR3_MODE || pvt->dchr1 & DDR3_MODE)
+		return ddr3_cs_size(cs_mode, dclr & WIDTH_128);
+	else
+		return ddr2_cs_size(cs_mode, dclr & WIDTH_128);
+}
+
+/*
+ * F15h supports only 64bit DCT interfaces
+ */
+static int f15_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
+				   unsigned cs_mode, int cs_mask_nr)
+{
+	WARN_ON(cs_mode > 12);
+
+	return ddr3_cs_size(cs_mode, false);
+}
+
+/* F15h M60h supports DDR4 mapping as well.. */
+static int f15_m60h_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
+					unsigned cs_mode, int cs_mask_nr)
+{
+	int cs_size;
+	u32 dcsm = pvt->csels[dct].csmasks[cs_mask_nr];
+
+	WARN_ON(cs_mode > 12);
+
+	if (pvt->dram_type == MEM_DDR4) {
+		if (cs_mode > 9)
+			return -1;
+
+		cs_size = ddr4_cs_size(cs_mode);
+	} else if (pvt->dram_type == MEM_LRDDR3) {
+		unsigned rank_multiply = dcsm & 0xf;
+
+		if (rank_multiply == 3)
+			rank_multiply = 4;
+		cs_size = ddr3_lrdimm_cs_size(cs_mode, rank_multiply);
+	} else {
+		/* Minimum cs size is 512mb for F15hM60h*/
+		if (cs_mode == 0x1)
+			return -1;
+
+		cs_size = ddr3_cs_size(cs_mode, false);
+	}
+
+	return cs_size;
+}
+
+/*
+ * F16h and F15h model 30h have only limited cs_modes.
+ */
+static int f16_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
+				unsigned cs_mode, int cs_mask_nr)
+{
+	WARN_ON(cs_mode > 12);
+
+	if (cs_mode == 6 || cs_mode == 8 ||
+	    cs_mode == 9 || cs_mode == 12)
+		return -1;
+	else
+		return ddr3_cs_size(cs_mode, false);
+}
+
+static int f17_base_addr_to_cs_size(struct amd64_pvt *pvt, u8 umc,
+				    unsigned int cs_mode, int csrow_nr)
+{
+	u32 base_addr = pvt->csels[umc].csbases[csrow_nr];
+
+	/*  Each mask is used for every two base addresses. */
+	u32 addr_mask = pvt->csels[umc].csmasks[csrow_nr >> 1];
+
+	/*  Register [31:1] = Address [39:9]. Size is in kBs here. */
+	u32 size = ((addr_mask >> 1) - (base_addr >> 1) + 1) >> 1;
+
+	edac_dbg(1, "BaseAddr: 0x%x, AddrMask: 0x%x\n", base_addr, addr_mask);
+
+	/* Return size in MBs. */
+	return size >> 10;
+}
+
+static void read_dram_ctl_register(struct amd64_pvt *pvt)
+{
+
+	if (pvt->fam == 0xf)
+		return;
+
+	if (!amd64_read_pci_cfg(pvt->F2, DCT_SEL_LO, &pvt->dct_sel_lo)) {
+		edac_dbg(0, "F2x110 (DCTSelLow): 0x%08x, High range addrs at: 0x%x\n",
+			 pvt->dct_sel_lo, dct_sel_baseaddr(pvt));
+
+		edac_dbg(0, "  DCTs operate in %s mode\n",
+			 (dct_ganging_enabled(pvt) ? "ganged" : "unganged"));
+
+		if (!dct_ganging_enabled(pvt))
+			edac_dbg(0, "  Address range split per DCT: %s\n",
+				 (dct_high_range_enabled(pvt) ? "yes" : "no"));
+
+		edac_dbg(0, "  data interleave for ECC: %s, DRAM cleared since last warm reset: %s\n",
+			 (dct_data_intlv_enabled(pvt) ? "enabled" : "disabled"),
+			 (dct_memory_cleared(pvt) ? "yes" : "no"));
+
+		edac_dbg(0, "  channel interleave: %s, "
+			 "interleave bits selector: 0x%x\n",
+			 (dct_interleave_enabled(pvt) ? "enabled" : "disabled"),
+			 dct_sel_interleave_addr(pvt));
+	}
+
+	amd64_read_pci_cfg(pvt->F2, DCT_SEL_HI, &pvt->dct_sel_hi);
+}
+
+/*
+ * Determine channel (DCT) based on the interleaving mode (see F15h M30h BKDG,
+ * 2.10.12 Memory Interleaving Modes).
+ */
+static u8 f15_m30h_determine_channel(struct amd64_pvt *pvt, u64 sys_addr,
+				     u8 intlv_en, int num_dcts_intlv,
+				     u32 dct_sel)
+{
+	u8 channel = 0;
+	u8 select;
+
+	if (!(intlv_en))
+		return (u8)(dct_sel);
+
+	if (num_dcts_intlv == 2) {
+		select = (sys_addr >> 8) & 0x3;
+		channel = select ? 0x3 : 0;
+	} else if (num_dcts_intlv == 4) {
+		u8 intlv_addr = dct_sel_interleave_addr(pvt);
+		switch (intlv_addr) {
+		case 0x4:
+			channel = (sys_addr >> 8) & 0x3;
+			break;
+		case 0x5:
+			channel = (sys_addr >> 9) & 0x3;
+			break;
+		}
+	}
+	return channel;
+}
+
+/*
+ * Determine channel (DCT) based on the interleaving mode: F10h BKDG, 2.8.9 Memory
+ * Interleaving Modes.
+ */
+static u8 f1x_determine_channel(struct amd64_pvt *pvt, u64 sys_addr,
+				bool hi_range_sel, u8 intlv_en)
+{
+	u8 dct_sel_high = (pvt->dct_sel_lo >> 1) & 1;
+
+	if (dct_ganging_enabled(pvt))
+		return 0;
+
+	if (hi_range_sel)
+		return dct_sel_high;
+
+	/*
+	 * see F2x110[DctSelIntLvAddr] - channel interleave mode
+	 */
+	if (dct_interleave_enabled(pvt)) {
+		u8 intlv_addr = dct_sel_interleave_addr(pvt);
+
+		/* return DCT select function: 0=DCT0, 1=DCT1 */
+		if (!intlv_addr)
+			return sys_addr >> 6 & 1;
+
+		if (intlv_addr & 0x2) {
+			u8 shift = intlv_addr & 0x1 ? 9 : 6;
+			u32 temp = hweight_long((u32) ((sys_addr >> 16) & 0x1F)) & 1;
+
+			return ((sys_addr >> shift) & 1) ^ temp;
+		}
+
+		if (intlv_addr & 0x4) {
+			u8 shift = intlv_addr & 0x1 ? 9 : 8;
+
+			return (sys_addr >> shift) & 1;
+		}
+
+		return (sys_addr >> (12 + hweight8(intlv_en))) & 1;
+	}
+
+	if (dct_high_range_enabled(pvt))
+		return ~dct_sel_high & 1;
+
+	return 0;
+}
+
+/* Convert the sys_addr to the normalized DCT address */
+static u64 f1x_get_norm_dct_addr(struct amd64_pvt *pvt, u8 range,
+				 u64 sys_addr, bool hi_rng,
+				 u32 dct_sel_base_addr)
+{
+	u64 chan_off;
+	u64 dram_base		= get_dram_base(pvt, range);
+	u64 hole_off		= f10_dhar_offset(pvt);
+	u64 dct_sel_base_off	= (u64)(pvt->dct_sel_hi & 0xFFFFFC00) << 16;
+
+	if (hi_rng) {
+		/*
+		 * if
+		 * base address of high range is below 4Gb
+		 * (bits [47:27] at [31:11])
+		 * DRAM address space on this DCT is hoisted above 4Gb	&&
+		 * sys_addr > 4Gb
+		 *
+		 *	remove hole offset from sys_addr
+		 * else
+		 *	remove high range offset from sys_addr
+		 */
+		if ((!(dct_sel_base_addr >> 16) ||
+		     dct_sel_base_addr < dhar_base(pvt)) &&
+		    dhar_valid(pvt) &&
+		    (sys_addr >= BIT_64(32)))
+			chan_off = hole_off;
+		else
+			chan_off = dct_sel_base_off;
+	} else {
+		/*
+		 * if
+		 * we have a valid hole		&&
+		 * sys_addr > 4Gb
+		 *
+		 *	remove hole
+		 * else
+		 *	remove dram base to normalize to DCT address
+		 */
+		if (dhar_valid(pvt) && (sys_addr >= BIT_64(32)))
+			chan_off = hole_off;
+		else
+			chan_off = dram_base;
+	}
+
+	return (sys_addr & GENMASK_ULL(47,6)) - (chan_off & GENMASK_ULL(47,23));
+}
+
+/*
+ * checks if the csrow passed in is marked as SPARED, if so returns the new
+ * spare row
+ */
+static int f10_process_possible_spare(struct amd64_pvt *pvt, u8 dct, int csrow)
+{
+	int tmp_cs;
+
+	if (online_spare_swap_done(pvt, dct) &&
+	    csrow == online_spare_bad_dramcs(pvt, dct)) {
+
+		for_each_chip_select(tmp_cs, dct, pvt) {
+			if (chip_select_base(tmp_cs, dct, pvt) & 0x2) {
+				csrow = tmp_cs;
+				break;
+			}
+		}
+	}
+	return csrow;
+}
+
+/*
+ * Iterate over the DRAM DCT "base" and "mask" registers looking for a
+ * SystemAddr match on the specified 'ChannelSelect' and 'NodeID'
+ *
+ * Return:
+ *	-EINVAL:  NOT FOUND
+ *	0..csrow = Chip-Select Row
+ */
+static int f1x_lookup_addr_in_dct(u64 in_addr, u8 nid, u8 dct)
+{
+	struct mem_ctl_info *mci;
+	struct amd64_pvt *pvt;
+	u64 cs_base, cs_mask;
+	int cs_found = -EINVAL;
+	int csrow;
+
+	mci = edac_mc_find(nid);
+	if (!mci)
+		return cs_found;
+
+	pvt = mci->pvt_info;
+
+	edac_dbg(1, "input addr: 0x%llx, DCT: %d\n", in_addr, dct);
+
+	for_each_chip_select(csrow, dct, pvt) {
+		if (!csrow_enabled(csrow, dct, pvt))
+			continue;
+
+		get_cs_base_and_mask(pvt, csrow, dct, &cs_base, &cs_mask);
+
+		edac_dbg(1, "    CSROW=%d CSBase=0x%llx CSMask=0x%llx\n",
+			 csrow, cs_base, cs_mask);
+
+		cs_mask = ~cs_mask;
+
+		edac_dbg(1, "    (InputAddr & ~CSMask)=0x%llx (CSBase & ~CSMask)=0x%llx\n",
+			 (in_addr & cs_mask), (cs_base & cs_mask));
+
+		if ((in_addr & cs_mask) == (cs_base & cs_mask)) {
+			if (pvt->fam == 0x15 && pvt->model >= 0x30) {
+				cs_found =  csrow;
+				break;
+			}
+			cs_found = f10_process_possible_spare(pvt, dct, csrow);
+
+			edac_dbg(1, " MATCH csrow=%d\n", cs_found);
+			break;
+		}
+	}
+	return cs_found;
+}
+
+/*
+ * See F2x10C. Non-interleaved graphics framebuffer memory under the 16G is
+ * swapped with a region located at the bottom of memory so that the GPU can use
+ * the interleaved region and thus two channels.
+ */
+static u64 f1x_swap_interleaved_region(struct amd64_pvt *pvt, u64 sys_addr)
+{
+	u32 swap_reg, swap_base, swap_limit, rgn_size, tmp_addr;
+
+	if (pvt->fam == 0x10) {
+		/* only revC3 and revE have that feature */
+		if (pvt->model < 4 || (pvt->model < 0xa && pvt->stepping < 3))
+			return sys_addr;
+	}
+
+	amd64_read_pci_cfg(pvt->F2, SWAP_INTLV_REG, &swap_reg);
+
+	if (!(swap_reg & 0x1))
+		return sys_addr;
+
+	swap_base	= (swap_reg >> 3) & 0x7f;
+	swap_limit	= (swap_reg >> 11) & 0x7f;
+	rgn_size	= (swap_reg >> 20) & 0x7f;
+	tmp_addr	= sys_addr >> 27;
+
+	if (!(sys_addr >> 34) &&
+	    (((tmp_addr >= swap_base) &&
+	     (tmp_addr <= swap_limit)) ||
+	     (tmp_addr < rgn_size)))
+		return sys_addr ^ (u64)swap_base << 27;
+
+	return sys_addr;
+}
+
+/* For a given @dram_range, check if @sys_addr falls within it. */
+static int f1x_match_to_this_node(struct amd64_pvt *pvt, unsigned range,
+				  u64 sys_addr, int *chan_sel)
+{
+	int cs_found = -EINVAL;
+	u64 chan_addr;
+	u32 dct_sel_base;
+	u8 channel;
+	bool high_range = false;
+
+	u8 node_id    = dram_dst_node(pvt, range);
+	u8 intlv_en   = dram_intlv_en(pvt, range);
+	u32 intlv_sel = dram_intlv_sel(pvt, range);
+
+	edac_dbg(1, "(range %d) SystemAddr= 0x%llx Limit=0x%llx\n",
+		 range, sys_addr, get_dram_limit(pvt, range));
+
+	if (dhar_valid(pvt) &&
+	    dhar_base(pvt) <= sys_addr &&
+	    sys_addr < BIT_64(32)) {
+		amd64_warn("Huh? Address is in the MMIO hole: 0x%016llx\n",
+			    sys_addr);
+		return -EINVAL;
+	}
+
+	if (intlv_en && (intlv_sel != ((sys_addr >> 12) & intlv_en)))
+		return -EINVAL;
+
+	sys_addr = f1x_swap_interleaved_region(pvt, sys_addr);
+
+	dct_sel_base = dct_sel_baseaddr(pvt);
+
+	/*
+	 * check whether addresses >= DctSelBaseAddr[47:27] are to be used to
+	 * select between DCT0 and DCT1.
+	 */
+	if (dct_high_range_enabled(pvt) &&
+	   !dct_ganging_enabled(pvt) &&
+	   ((sys_addr >> 27) >= (dct_sel_base >> 11)))
+		high_range = true;
+
+	channel = f1x_determine_channel(pvt, sys_addr, high_range, intlv_en);
+
+	chan_addr = f1x_get_norm_dct_addr(pvt, range, sys_addr,
+					  high_range, dct_sel_base);
+
+	/* Remove node interleaving, see F1x120 */
+	if (intlv_en)
+		chan_addr = ((chan_addr >> (12 + hweight8(intlv_en))) << 12) |
+			    (chan_addr & 0xfff);
+
+	/* remove channel interleave */
+	if (dct_interleave_enabled(pvt) &&
+	   !dct_high_range_enabled(pvt) &&
+	   !dct_ganging_enabled(pvt)) {
+
+		if (dct_sel_interleave_addr(pvt) != 1) {
+			if (dct_sel_interleave_addr(pvt) == 0x3)
+				/* hash 9 */
+				chan_addr = ((chan_addr >> 10) << 9) |
+					     (chan_addr & 0x1ff);
+			else
+				/* A[6] or hash 6 */
+				chan_addr = ((chan_addr >> 7) << 6) |
+					     (chan_addr & 0x3f);
+		} else
+			/* A[12] */
+			chan_addr = ((chan_addr >> 13) << 12) |
+				     (chan_addr & 0xfff);
+	}
+
+	edac_dbg(1, "   Normalized DCT addr: 0x%llx\n", chan_addr);
+
+	cs_found = f1x_lookup_addr_in_dct(chan_addr, node_id, channel);
+
+	if (cs_found >= 0)
+		*chan_sel = channel;
+
+	return cs_found;
+}
+
+static int f15_m30h_match_to_this_node(struct amd64_pvt *pvt, unsigned range,
+					u64 sys_addr, int *chan_sel)
+{
+	int cs_found = -EINVAL;
+	int num_dcts_intlv = 0;
+	u64 chan_addr, chan_offset;
+	u64 dct_base, dct_limit;
+	u32 dct_cont_base_reg, dct_cont_limit_reg, tmp;
+	u8 channel, alias_channel, leg_mmio_hole, dct_sel, dct_offset_en;
+
+	u64 dhar_offset		= f10_dhar_offset(pvt);
+	u8 intlv_addr		= dct_sel_interleave_addr(pvt);
+	u8 node_id		= dram_dst_node(pvt, range);
+	u8 intlv_en		= dram_intlv_en(pvt, range);
+
+	amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &dct_cont_base_reg);
+	amd64_read_pci_cfg(pvt->F1, DRAM_CONT_LIMIT, &dct_cont_limit_reg);
+
+	dct_offset_en		= (u8) ((dct_cont_base_reg >> 3) & BIT(0));
+	dct_sel			= (u8) ((dct_cont_base_reg >> 4) & 0x7);
+
+	edac_dbg(1, "(range %d) SystemAddr= 0x%llx Limit=0x%llx\n",
+		 range, sys_addr, get_dram_limit(pvt, range));
+
+	if (!(get_dram_base(pvt, range)  <= sys_addr) &&
+	    !(get_dram_limit(pvt, range) >= sys_addr))
+		return -EINVAL;
+
+	if (dhar_valid(pvt) &&
+	    dhar_base(pvt) <= sys_addr &&
+	    sys_addr < BIT_64(32)) {
+		amd64_warn("Huh? Address is in the MMIO hole: 0x%016llx\n",
+			    sys_addr);
+		return -EINVAL;
+	}
+
+	/* Verify sys_addr is within DCT Range. */
+	dct_base = (u64) dct_sel_baseaddr(pvt);
+	dct_limit = (dct_cont_limit_reg >> 11) & 0x1FFF;
+
+	if (!(dct_cont_base_reg & BIT(0)) &&
+	    !(dct_base <= (sys_addr >> 27) &&
+	      dct_limit >= (sys_addr >> 27)))
+		return -EINVAL;
+
+	/* Verify number of dct's that participate in channel interleaving. */
+	num_dcts_intlv = (int) hweight8(intlv_en);
+
+	if (!(num_dcts_intlv % 2 == 0) || (num_dcts_intlv > 4))
+		return -EINVAL;
+
+	if (pvt->model >= 0x60)
+		channel = f1x_determine_channel(pvt, sys_addr, false, intlv_en);
+	else
+		channel = f15_m30h_determine_channel(pvt, sys_addr, intlv_en,
+						     num_dcts_intlv, dct_sel);
+
+	/* Verify we stay within the MAX number of channels allowed */
+	if (channel > 3)
+		return -EINVAL;
+
+	leg_mmio_hole = (u8) (dct_cont_base_reg >> 1 & BIT(0));
+
+	/* Get normalized DCT addr */
+	if (leg_mmio_hole && (sys_addr >= BIT_64(32)))
+		chan_offset = dhar_offset;
+	else
+		chan_offset = dct_base << 27;
+
+	chan_addr = sys_addr - chan_offset;
+
+	/* remove channel interleave */
+	if (num_dcts_intlv == 2) {
+		if (intlv_addr == 0x4)
+			chan_addr = ((chan_addr >> 9) << 8) |
+						(chan_addr & 0xff);
+		else if (intlv_addr == 0x5)
+			chan_addr = ((chan_addr >> 10) << 9) |
+						(chan_addr & 0x1ff);
+		else
+			return -EINVAL;
+
+	} else if (num_dcts_intlv == 4) {
+		if (intlv_addr == 0x4)
+			chan_addr = ((chan_addr >> 10) << 8) |
+							(chan_addr & 0xff);
+		else if (intlv_addr == 0x5)
+			chan_addr = ((chan_addr >> 11) << 9) |
+							(chan_addr & 0x1ff);
+		else
+			return -EINVAL;
+	}
+
+	if (dct_offset_en) {
+		amd64_read_pci_cfg(pvt->F1,
+				   DRAM_CONT_HIGH_OFF + (int) channel * 4,
+				   &tmp);
+		chan_addr +=  (u64) ((tmp >> 11) & 0xfff) << 27;
+	}
+
+	f15h_select_dct(pvt, channel);
+
+	edac_dbg(1, "   Normalized DCT addr: 0x%llx\n", chan_addr);
+
+	/*
+	 * Find Chip select:
+	 * if channel = 3, then alias it to 1. This is because, in F15 M30h,
+	 * there is support for 4 DCT's, but only 2 are currently functional.
+	 * They are DCT0 and DCT3. But we have read all registers of DCT3 into
+	 * pvt->csels[1]. So we need to use '1' here to get correct info.
+	 * Refer F15 M30h BKDG Section 2.10 and 2.10.3 for clarifications.
+	 */
+	alias_channel =  (channel == 3) ? 1 : channel;
+
+	cs_found = f1x_lookup_addr_in_dct(chan_addr, node_id, alias_channel);
+
+	if (cs_found >= 0)
+		*chan_sel = alias_channel;
+
+	return cs_found;
+}
+
+static int f1x_translate_sysaddr_to_cs(struct amd64_pvt *pvt,
+					u64 sys_addr,
+					int *chan_sel)
+{
+	int cs_found = -EINVAL;
+	unsigned range;
+
+	for (range = 0; range < DRAM_RANGES; range++) {
+		if (!dram_rw(pvt, range))
+			continue;
+
+		if (pvt->fam == 0x15 && pvt->model >= 0x30)
+			cs_found = f15_m30h_match_to_this_node(pvt, range,
+							       sys_addr,
+							       chan_sel);
+
+		else if ((get_dram_base(pvt, range)  <= sys_addr) &&
+			 (get_dram_limit(pvt, range) >= sys_addr)) {
+			cs_found = f1x_match_to_this_node(pvt, range,
+							  sys_addr, chan_sel);
+			if (cs_found >= 0)
+				break;
+		}
+	}
+	return cs_found;
+}
+
+/*
+ * For reference see "2.8.5 Routing DRAM Requests" in F10 BKDG. This code maps
+ * a @sys_addr to NodeID, DCT (channel) and chip select (CSROW).
+ *
+ * The @sys_addr is usually an error address received from the hardware
+ * (MCX_ADDR).
+ */
+static void f1x_map_sysaddr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr,
+				     struct err_info *err)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+
+	error_address_to_page_and_offset(sys_addr, err);
+
+	err->csrow = f1x_translate_sysaddr_to_cs(pvt, sys_addr, &err->channel);
+	if (err->csrow < 0) {
+		err->err_code = ERR_CSROW;
+		return;
+	}
+
+	/*
+	 * We need the syndromes for channel detection only when we're
+	 * ganged. Otherwise @chan should already contain the channel at
+	 * this point.
+	 */
+	if (dct_ganging_enabled(pvt))
+		err->channel = get_channel_from_ecc_syndrome(mci, err->syndrome);
+}
+
+/*
+ * debug routine to display the memory sizes of all logical DIMMs and its
+ * CSROWs
+ */
+static void debug_display_dimm_sizes(struct amd64_pvt *pvt, u8 ctrl)
+{
+	int dimm, size0, size1;
+	u32 *dcsb = ctrl ? pvt->csels[1].csbases : pvt->csels[0].csbases;
+	u32 dbam  = ctrl ? pvt->dbam1 : pvt->dbam0;
+
+	if (pvt->fam == 0xf) {
+		/* K8 families < revF not supported yet */
+	       if (pvt->ext_model < K8_REV_F)
+			return;
+	       else
+		       WARN_ON(ctrl != 0);
+	}
+
+	if (pvt->fam == 0x10) {
+		dbam = (ctrl && !dct_ganging_enabled(pvt)) ? pvt->dbam1
+							   : pvt->dbam0;
+		dcsb = (ctrl && !dct_ganging_enabled(pvt)) ?
+				 pvt->csels[1].csbases :
+				 pvt->csels[0].csbases;
+	} else if (ctrl) {
+		dbam = pvt->dbam0;
+		dcsb = pvt->csels[1].csbases;
+	}
+	edac_dbg(1, "F2x%d80 (DRAM Bank Address Mapping): 0x%08x\n",
+		 ctrl, dbam);
+
+	edac_printk(KERN_DEBUG, EDAC_MC, "DCT%d chip selects:\n", ctrl);
+
+	/* Dump memory sizes for DIMM and its CSROWs */
+	for (dimm = 0; dimm < 4; dimm++) {
+
+		size0 = 0;
+		if (dcsb[dimm*2] & DCSB_CS_ENABLE)
+			/*
+			 * For F15m60h, we need multiplier for LRDIMM cs_size
+			 * calculation. We pass dimm value to the dbam_to_cs
+			 * mapper so we can find the multiplier from the
+			 * corresponding DCSM.
+			 */
+			size0 = pvt->ops->dbam_to_cs(pvt, ctrl,
+						     DBAM_DIMM(dimm, dbam),
+						     dimm);
+
+		size1 = 0;
+		if (dcsb[dimm*2 + 1] & DCSB_CS_ENABLE)
+			size1 = pvt->ops->dbam_to_cs(pvt, ctrl,
+						     DBAM_DIMM(dimm, dbam),
+						     dimm);
+
+		amd64_info(EDAC_MC ": %d: %5dMB %d: %5dMB\n",
+				dimm * 2,     size0,
+				dimm * 2 + 1, size1);
+	}
+}
+
+static struct amd64_family_type family_types[] = {
+	[K8_CPUS] = {
+		.ctl_name = "K8",
+		.f1_id = PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP,
+		.f2_id = PCI_DEVICE_ID_AMD_K8_NB_MEMCTL,
+		.ops = {
+			.early_channel_count	= k8_early_channel_count,
+			.map_sysaddr_to_csrow	= k8_map_sysaddr_to_csrow,
+			.dbam_to_cs		= k8_dbam_to_chip_select,
+		}
+	},
+	[F10_CPUS] = {
+		.ctl_name = "F10h",
+		.f1_id = PCI_DEVICE_ID_AMD_10H_NB_MAP,
+		.f2_id = PCI_DEVICE_ID_AMD_10H_NB_DRAM,
+		.ops = {
+			.early_channel_count	= f1x_early_channel_count,
+			.map_sysaddr_to_csrow	= f1x_map_sysaddr_to_csrow,
+			.dbam_to_cs		= f10_dbam_to_chip_select,
+		}
+	},
+	[F15_CPUS] = {
+		.ctl_name = "F15h",
+		.f1_id = PCI_DEVICE_ID_AMD_15H_NB_F1,
+		.f2_id = PCI_DEVICE_ID_AMD_15H_NB_F2,
+		.ops = {
+			.early_channel_count	= f1x_early_channel_count,
+			.map_sysaddr_to_csrow	= f1x_map_sysaddr_to_csrow,
+			.dbam_to_cs		= f15_dbam_to_chip_select,
+		}
+	},
+	[F15_M30H_CPUS] = {
+		.ctl_name = "F15h_M30h",
+		.f1_id = PCI_DEVICE_ID_AMD_15H_M30H_NB_F1,
+		.f2_id = PCI_DEVICE_ID_AMD_15H_M30H_NB_F2,
+		.ops = {
+			.early_channel_count	= f1x_early_channel_count,
+			.map_sysaddr_to_csrow	= f1x_map_sysaddr_to_csrow,
+			.dbam_to_cs		= f16_dbam_to_chip_select,
+		}
+	},
+	[F15_M60H_CPUS] = {
+		.ctl_name = "F15h_M60h",
+		.f1_id = PCI_DEVICE_ID_AMD_15H_M60H_NB_F1,
+		.f2_id = PCI_DEVICE_ID_AMD_15H_M60H_NB_F2,
+		.ops = {
+			.early_channel_count	= f1x_early_channel_count,
+			.map_sysaddr_to_csrow	= f1x_map_sysaddr_to_csrow,
+			.dbam_to_cs		= f15_m60h_dbam_to_chip_select,
+		}
+	},
+	[F16_CPUS] = {
+		.ctl_name = "F16h",
+		.f1_id = PCI_DEVICE_ID_AMD_16H_NB_F1,
+		.f2_id = PCI_DEVICE_ID_AMD_16H_NB_F2,
+		.ops = {
+			.early_channel_count	= f1x_early_channel_count,
+			.map_sysaddr_to_csrow	= f1x_map_sysaddr_to_csrow,
+			.dbam_to_cs		= f16_dbam_to_chip_select,
+		}
+	},
+	[F16_M30H_CPUS] = {
+		.ctl_name = "F16h_M30h",
+		.f1_id = PCI_DEVICE_ID_AMD_16H_M30H_NB_F1,
+		.f2_id = PCI_DEVICE_ID_AMD_16H_M30H_NB_F2,
+		.ops = {
+			.early_channel_count	= f1x_early_channel_count,
+			.map_sysaddr_to_csrow	= f1x_map_sysaddr_to_csrow,
+			.dbam_to_cs		= f16_dbam_to_chip_select,
+		}
+	},
+	[F17_CPUS] = {
+		.ctl_name = "F17h",
+		.f0_id = PCI_DEVICE_ID_AMD_17H_DF_F0,
+		.f6_id = PCI_DEVICE_ID_AMD_17H_DF_F6,
+		.ops = {
+			.early_channel_count	= f17_early_channel_count,
+			.dbam_to_cs		= f17_base_addr_to_cs_size,
+		}
+	},
+	[F17_M10H_CPUS] = {
+		.ctl_name = "F17h_M10h",
+		.f0_id = PCI_DEVICE_ID_AMD_17H_M10H_DF_F0,
+		.f6_id = PCI_DEVICE_ID_AMD_17H_M10H_DF_F6,
+		.ops = {
+			.early_channel_count	= f17_early_channel_count,
+			.dbam_to_cs		= f17_base_addr_to_cs_size,
+		}
+	},
+	[F17_M30H_CPUS] = {
+		.ctl_name = "F17h_M30h",
+		.f0_id = PCI_DEVICE_ID_AMD_17H_M30H_DF_F0,
+		.f6_id = PCI_DEVICE_ID_AMD_17H_M30H_DF_F6,
+		.ops = {
+			.early_channel_count	= f17_early_channel_count,
+			.dbam_to_cs		= f17_base_addr_to_cs_size,
+		}
+	},
+};
+
+/*
+ * These are tables of eigenvectors (one per line) which can be used for the
+ * construction of the syndrome tables. The modified syndrome search algorithm
+ * uses those to find the symbol in error and thus the DIMM.
+ *
+ * Algorithm courtesy of Ross LaFetra from AMD.
+ */
+static const u16 x4_vectors[] = {
+	0x2f57, 0x1afe, 0x66cc, 0xdd88,
+	0x11eb, 0x3396, 0x7f4c, 0xeac8,
+	0x0001, 0x0002, 0x0004, 0x0008,
+	0x1013, 0x3032, 0x4044, 0x8088,
+	0x106b, 0x30d6, 0x70fc, 0xe0a8,
+	0x4857, 0xc4fe, 0x13cc, 0x3288,
+	0x1ac5, 0x2f4a, 0x5394, 0xa1e8,
+	0x1f39, 0x251e, 0xbd6c, 0x6bd8,
+	0x15c1, 0x2a42, 0x89ac, 0x4758,
+	0x2b03, 0x1602, 0x4f0c, 0xca08,
+	0x1f07, 0x3a0e, 0x6b04, 0xbd08,
+	0x8ba7, 0x465e, 0x244c, 0x1cc8,
+	0x2b87, 0x164e, 0x642c, 0xdc18,
+	0x40b9, 0x80de, 0x1094, 0x20e8,
+	0x27db, 0x1eb6, 0x9dac, 0x7b58,
+	0x11c1, 0x2242, 0x84ac, 0x4c58,
+	0x1be5, 0x2d7a, 0x5e34, 0xa718,
+	0x4b39, 0x8d1e, 0x14b4, 0x28d8,
+	0x4c97, 0xc87e, 0x11fc, 0x33a8,
+	0x8e97, 0x497e, 0x2ffc, 0x1aa8,
+	0x16b3, 0x3d62, 0x4f34, 0x8518,
+	0x1e2f, 0x391a, 0x5cac, 0xf858,
+	0x1d9f, 0x3b7a, 0x572c, 0xfe18,
+	0x15f5, 0x2a5a, 0x5264, 0xa3b8,
+	0x1dbb, 0x3b66, 0x715c, 0xe3f8,
+	0x4397, 0xc27e, 0x17fc, 0x3ea8,
+	0x1617, 0x3d3e, 0x6464, 0xb8b8,
+	0x23ff, 0x12aa, 0xab6c, 0x56d8,
+	0x2dfb, 0x1ba6, 0x913c, 0x7328,
+	0x185d, 0x2ca6, 0x7914, 0x9e28,
+	0x171b, 0x3e36, 0x7d7c, 0xebe8,
+	0x4199, 0x82ee, 0x19f4, 0x2e58,
+	0x4807, 0xc40e, 0x130c, 0x3208,
+	0x1905, 0x2e0a, 0x5804, 0xac08,
+	0x213f, 0x132a, 0xadfc, 0x5ba8,
+	0x19a9, 0x2efe, 0xb5cc, 0x6f88,
+};
+
+static const u16 x8_vectors[] = {
+	0x0145, 0x028a, 0x2374, 0x43c8, 0xa1f0, 0x0520, 0x0a40, 0x1480,
+	0x0211, 0x0422, 0x0844, 0x1088, 0x01b0, 0x44e0, 0x23c0, 0xed80,
+	0x1011, 0x0116, 0x022c, 0x0458, 0x08b0, 0x8c60, 0x2740, 0x4e80,
+	0x0411, 0x0822, 0x1044, 0x0158, 0x02b0, 0x2360, 0x46c0, 0xab80,
+	0x0811, 0x1022, 0x012c, 0x0258, 0x04b0, 0x4660, 0x8cc0, 0x2780,
+	0x2071, 0x40e2, 0xa0c4, 0x0108, 0x0210, 0x0420, 0x0840, 0x1080,
+	0x4071, 0x80e2, 0x0104, 0x0208, 0x0410, 0x0820, 0x1040, 0x2080,
+	0x8071, 0x0102, 0x0204, 0x0408, 0x0810, 0x1020, 0x2040, 0x4080,
+	0x019d, 0x03d6, 0x136c, 0x2198, 0x50b0, 0xb2e0, 0x0740, 0x0e80,
+	0x0189, 0x03ea, 0x072c, 0x0e58, 0x1cb0, 0x56e0, 0x37c0, 0xf580,
+	0x01fd, 0x0376, 0x06ec, 0x0bb8, 0x1110, 0x2220, 0x4440, 0x8880,
+	0x0163, 0x02c6, 0x1104, 0x0758, 0x0eb0, 0x2be0, 0x6140, 0xc280,
+	0x02fd, 0x01c6, 0x0b5c, 0x1108, 0x07b0, 0x25a0, 0x8840, 0x6180,
+	0x0801, 0x012e, 0x025c, 0x04b8, 0x1370, 0x26e0, 0x57c0, 0xb580,
+	0x0401, 0x0802, 0x015c, 0x02b8, 0x22b0, 0x13e0, 0x7140, 0xe280,
+	0x0201, 0x0402, 0x0804, 0x01b8, 0x11b0, 0x31a0, 0x8040, 0x7180,
+	0x0101, 0x0202, 0x0404, 0x0808, 0x1010, 0x2020, 0x4040, 0x8080,
+	0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080,
+	0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000, 0x8000,
+};
+
+static int decode_syndrome(u16 syndrome, const u16 *vectors, unsigned num_vecs,
+			   unsigned v_dim)
+{
+	unsigned int i, err_sym;
+
+	for (err_sym = 0; err_sym < num_vecs / v_dim; err_sym++) {
+		u16 s = syndrome;
+		unsigned v_idx =  err_sym * v_dim;
+		unsigned v_end = (err_sym + 1) * v_dim;
+
+		/* walk over all 16 bits of the syndrome */
+		for (i = 1; i < (1U << 16); i <<= 1) {
+
+			/* if bit is set in that eigenvector... */
+			if (v_idx < v_end && vectors[v_idx] & i) {
+				u16 ev_comp = vectors[v_idx++];
+
+				/* ... and bit set in the modified syndrome, */
+				if (s & i) {
+					/* remove it. */
+					s ^= ev_comp;
+
+					if (!s)
+						return err_sym;
+				}
+
+			} else if (s & i)
+				/* can't get to zero, move to next symbol */
+				break;
+		}
+	}
+
+	edac_dbg(0, "syndrome(%x) not found\n", syndrome);
+	return -1;
+}
+
+static int map_err_sym_to_channel(int err_sym, int sym_size)
+{
+	if (sym_size == 4)
+		switch (err_sym) {
+		case 0x20:
+		case 0x21:
+			return 0;
+			break;
+		case 0x22:
+		case 0x23:
+			return 1;
+			break;
+		default:
+			return err_sym >> 4;
+			break;
+		}
+	/* x8 symbols */
+	else
+		switch (err_sym) {
+		/* imaginary bits not in a DIMM */
+		case 0x10:
+			WARN(1, KERN_ERR "Invalid error symbol: 0x%x\n",
+					  err_sym);
+			return -1;
+			break;
+
+		case 0x11:
+			return 0;
+			break;
+		case 0x12:
+			return 1;
+			break;
+		default:
+			return err_sym >> 3;
+			break;
+		}
+	return -1;
+}
+
+static int get_channel_from_ecc_syndrome(struct mem_ctl_info *mci, u16 syndrome)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	int err_sym = -1;
+
+	if (pvt->ecc_sym_sz == 8)
+		err_sym = decode_syndrome(syndrome, x8_vectors,
+					  ARRAY_SIZE(x8_vectors),
+					  pvt->ecc_sym_sz);
+	else if (pvt->ecc_sym_sz == 4)
+		err_sym = decode_syndrome(syndrome, x4_vectors,
+					  ARRAY_SIZE(x4_vectors),
+					  pvt->ecc_sym_sz);
+	else {
+		amd64_warn("Illegal syndrome type: %u\n", pvt->ecc_sym_sz);
+		return err_sym;
+	}
+
+	return map_err_sym_to_channel(err_sym, pvt->ecc_sym_sz);
+}
+
+static void __log_ecc_error(struct mem_ctl_info *mci, struct err_info *err,
+			    u8 ecc_type)
+{
+	enum hw_event_mc_err_type err_type;
+	const char *string;
+
+	if (ecc_type == 2)
+		err_type = HW_EVENT_ERR_CORRECTED;
+	else if (ecc_type == 1)
+		err_type = HW_EVENT_ERR_UNCORRECTED;
+	else if (ecc_type == 3)
+		err_type = HW_EVENT_ERR_DEFERRED;
+	else {
+		WARN(1, "Something is rotten in the state of Denmark.\n");
+		return;
+	}
+
+	switch (err->err_code) {
+	case DECODE_OK:
+		string = "";
+		break;
+	case ERR_NODE:
+		string = "Failed to map error addr to a node";
+		break;
+	case ERR_CSROW:
+		string = "Failed to map error addr to a csrow";
+		break;
+	case ERR_CHANNEL:
+		string = "Unknown syndrome - possible error reporting race";
+		break;
+	case ERR_SYND:
+		string = "MCA_SYND not valid - unknown syndrome and csrow";
+		break;
+	case ERR_NORM_ADDR:
+		string = "Cannot decode normalized address";
+		break;
+	default:
+		string = "WTF error";
+		break;
+	}
+
+	edac_mc_handle_error(err_type, mci, 1,
+			     err->page, err->offset, err->syndrome,
+			     err->csrow, err->channel, -1,
+			     string, "");
+}
+
+static inline void decode_bus_error(int node_id, struct mce *m)
+{
+	struct mem_ctl_info *mci;
+	struct amd64_pvt *pvt;
+	u8 ecc_type = (m->status >> 45) & 0x3;
+	u8 xec = XEC(m->status, 0x1f);
+	u16 ec = EC(m->status);
+	u64 sys_addr;
+	struct err_info err;
+
+	mci = edac_mc_find(node_id);
+	if (!mci)
+		return;
+
+	pvt = mci->pvt_info;
+
+	/* Bail out early if this was an 'observed' error */
+	if (PP(ec) == NBSL_PP_OBS)
+		return;
+
+	/* Do only ECC errors */
+	if (xec && xec != F10_NBSL_EXT_ERR_ECC)
+		return;
+
+	memset(&err, 0, sizeof(err));
+
+	sys_addr = get_error_address(pvt, m);
+
+	if (ecc_type == 2)
+		err.syndrome = extract_syndrome(m->status);
+
+	pvt->ops->map_sysaddr_to_csrow(mci, sys_addr, &err);
+
+	__log_ecc_error(mci, &err, ecc_type);
+}
+
+/*
+ * To find the UMC channel represented by this bank we need to match on its
+ * instance_id. The instance_id of a bank is held in the lower 32 bits of its
+ * IPID.
+ */
+static int find_umc_channel(struct amd64_pvt *pvt, struct mce *m)
+{
+	u32 umc_instance_id[] = {0x50f00, 0x150f00};
+	u32 instance_id = m->ipid & GENMASK(31, 0);
+	int i, channel = -1;
+
+	for (i = 0; i < ARRAY_SIZE(umc_instance_id); i++)
+		if (umc_instance_id[i] == instance_id)
+			channel = i;
+
+	return channel;
+}
+
+static void decode_umc_error(int node_id, struct mce *m)
+{
+	u8 ecc_type = (m->status >> 45) & 0x3;
+	struct mem_ctl_info *mci;
+	struct amd64_pvt *pvt;
+	struct err_info err;
+	u64 sys_addr;
+
+	mci = edac_mc_find(node_id);
+	if (!mci)
+		return;
+
+	pvt = mci->pvt_info;
+
+	memset(&err, 0, sizeof(err));
+
+	if (m->status & MCI_STATUS_DEFERRED)
+		ecc_type = 3;
+
+	err.channel = find_umc_channel(pvt, m);
+	if (err.channel < 0) {
+		err.err_code = ERR_CHANNEL;
+		goto log_error;
+	}
+
+	if (!(m->status & MCI_STATUS_SYNDV)) {
+		err.err_code = ERR_SYND;
+		goto log_error;
+	}
+
+	if (ecc_type == 2) {
+		u8 length = (m->synd >> 18) & 0x3f;
+
+		if (length)
+			err.syndrome = (m->synd >> 32) & GENMASK(length - 1, 0);
+		else
+			err.err_code = ERR_CHANNEL;
+	}
+
+	err.csrow = m->synd & 0x7;
+
+	if (umc_normaddr_to_sysaddr(m->addr, pvt->mc_node_id, err.channel, &sys_addr)) {
+		err.err_code = ERR_NORM_ADDR;
+		goto log_error;
+	}
+
+	error_address_to_page_and_offset(sys_addr, &err);
+
+log_error:
+	__log_ecc_error(mci, &err, ecc_type);
+}
+
+/*
+ * Use pvt->F3 which contains the F3 CPU PCI device to get the related
+ * F1 (AddrMap) and F2 (Dct) devices. Return negative value on error.
+ * Reserve F0 and F6 on systems with a UMC.
+ */
+static int
+reserve_mc_sibling_devs(struct amd64_pvt *pvt, u16 pci_id1, u16 pci_id2)
+{
+	if (pvt->umc) {
+		pvt->F0 = pci_get_related_function(pvt->F3->vendor, pci_id1, pvt->F3);
+		if (!pvt->F0) {
+			amd64_err("F0 not found, device 0x%x (broken BIOS?)\n", pci_id1);
+			return -ENODEV;
+		}
+
+		pvt->F6 = pci_get_related_function(pvt->F3->vendor, pci_id2, pvt->F3);
+		if (!pvt->F6) {
+			pci_dev_put(pvt->F0);
+			pvt->F0 = NULL;
+
+			amd64_err("F6 not found: device 0x%x (broken BIOS?)\n", pci_id2);
+			return -ENODEV;
+		}
+
+		if (!pci_ctl_dev)
+			pci_ctl_dev = &pvt->F0->dev;
+
+		edac_dbg(1, "F0: %s\n", pci_name(pvt->F0));
+		edac_dbg(1, "F3: %s\n", pci_name(pvt->F3));
+		edac_dbg(1, "F6: %s\n", pci_name(pvt->F6));
+
+		return 0;
+	}
+
+	/* Reserve the ADDRESS MAP Device */
+	pvt->F1 = pci_get_related_function(pvt->F3->vendor, pci_id1, pvt->F3);
+	if (!pvt->F1) {
+		amd64_err("F1 not found: device 0x%x (broken BIOS?)\n", pci_id1);
+		return -ENODEV;
+	}
+
+	/* Reserve the DCT Device */
+	pvt->F2 = pci_get_related_function(pvt->F3->vendor, pci_id2, pvt->F3);
+	if (!pvt->F2) {
+		pci_dev_put(pvt->F1);
+		pvt->F1 = NULL;
+
+		amd64_err("F2 not found: device 0x%x (broken BIOS?)\n", pci_id2);
+		return -ENODEV;
+	}
+
+	if (!pci_ctl_dev)
+		pci_ctl_dev = &pvt->F2->dev;
+
+	edac_dbg(1, "F1: %s\n", pci_name(pvt->F1));
+	edac_dbg(1, "F2: %s\n", pci_name(pvt->F2));
+	edac_dbg(1, "F3: %s\n", pci_name(pvt->F3));
+
+	return 0;
+}
+
+static void free_mc_sibling_devs(struct amd64_pvt *pvt)
+{
+	if (pvt->umc) {
+		pci_dev_put(pvt->F0);
+		pci_dev_put(pvt->F6);
+	} else {
+		pci_dev_put(pvt->F1);
+		pci_dev_put(pvt->F2);
+	}
+}
+
+static void determine_ecc_sym_sz(struct amd64_pvt *pvt)
+{
+	pvt->ecc_sym_sz = 4;
+
+	if (pvt->umc) {
+		u8 i;
+
+		for (i = 0; i < NUM_UMCS; i++) {
+			/* Check enabled channels only: */
+			if ((pvt->umc[i].sdp_ctrl & UMC_SDP_INIT) &&
+			    (pvt->umc[i].ecc_ctrl & BIT(7))) {
+				pvt->ecc_sym_sz = 8;
+				break;
+			}
+		}
+
+		return;
+	}
+
+	if (pvt->fam >= 0x10) {
+		u32 tmp;
+
+		amd64_read_pci_cfg(pvt->F3, EXT_NB_MCA_CFG, &tmp);
+		/* F16h has only DCT0, so no need to read dbam1. */
+		if (pvt->fam != 0x16)
+			amd64_read_dct_pci_cfg(pvt, 1, DBAM0, &pvt->dbam1);
+
+		/* F10h, revD and later can do x8 ECC too. */
+		if ((pvt->fam > 0x10 || pvt->model > 7) && tmp & BIT(25))
+			pvt->ecc_sym_sz = 8;
+	}
+}
+
+/*
+ * Retrieve the hardware registers of the memory controller.
+ */
+static void __read_mc_regs_df(struct amd64_pvt *pvt)
+{
+	u8 nid = pvt->mc_node_id;
+	struct amd64_umc *umc;
+	u32 i, umc_base;
+
+	/* Read registers from each UMC */
+	for (i = 0; i < NUM_UMCS; i++) {
+
+		umc_base = get_umc_base(i);
+		umc = &pvt->umc[i];
+
+		amd_smn_read(nid, umc_base + UMCCH_DIMM_CFG, &umc->dimm_cfg);
+		amd_smn_read(nid, umc_base + UMCCH_UMC_CFG, &umc->umc_cfg);
+		amd_smn_read(nid, umc_base + UMCCH_SDP_CTRL, &umc->sdp_ctrl);
+		amd_smn_read(nid, umc_base + UMCCH_ECC_CTRL, &umc->ecc_ctrl);
+		amd_smn_read(nid, umc_base + UMCCH_UMC_CAP_HI, &umc->umc_cap_hi);
+	}
+}
+
+/*
+ * Retrieve the hardware registers of the memory controller (this includes the
+ * 'Address Map' and 'Misc' device regs)
+ */
+static void read_mc_regs(struct amd64_pvt *pvt)
+{
+	unsigned int range;
+	u64 msr_val;
+
+	/*
+	 * Retrieve TOP_MEM and TOP_MEM2; no masking off of reserved bits since
+	 * those are Read-As-Zero.
+	 */
+	rdmsrl(MSR_K8_TOP_MEM1, pvt->top_mem);
+	edac_dbg(0, "  TOP_MEM:  0x%016llx\n", pvt->top_mem);
+
+	/* Check first whether TOP_MEM2 is enabled: */
+	rdmsrl(MSR_K8_SYSCFG, msr_val);
+	if (msr_val & BIT(21)) {
+		rdmsrl(MSR_K8_TOP_MEM2, pvt->top_mem2);
+		edac_dbg(0, "  TOP_MEM2: 0x%016llx\n", pvt->top_mem2);
+	} else {
+		edac_dbg(0, "  TOP_MEM2 disabled\n");
+	}
+
+	if (pvt->umc) {
+		__read_mc_regs_df(pvt);
+		amd64_read_pci_cfg(pvt->F0, DF_DHAR, &pvt->dhar);
+
+		goto skip;
+	}
+
+	amd64_read_pci_cfg(pvt->F3, NBCAP, &pvt->nbcap);
+
+	read_dram_ctl_register(pvt);
+
+	for (range = 0; range < DRAM_RANGES; range++) {
+		u8 rw;
+
+		/* read settings for this DRAM range */
+		read_dram_base_limit_regs(pvt, range);
+
+		rw = dram_rw(pvt, range);
+		if (!rw)
+			continue;
+
+		edac_dbg(1, "  DRAM range[%d], base: 0x%016llx; limit: 0x%016llx\n",
+			 range,
+			 get_dram_base(pvt, range),
+			 get_dram_limit(pvt, range));
+
+		edac_dbg(1, "   IntlvEn=%s; Range access: %s%s IntlvSel=%d DstNode=%d\n",
+			 dram_intlv_en(pvt, range) ? "Enabled" : "Disabled",
+			 (rw & 0x1) ? "R" : "-",
+			 (rw & 0x2) ? "W" : "-",
+			 dram_intlv_sel(pvt, range),
+			 dram_dst_node(pvt, range));
+	}
+
+	amd64_read_pci_cfg(pvt->F1, DHAR, &pvt->dhar);
+	amd64_read_dct_pci_cfg(pvt, 0, DBAM0, &pvt->dbam0);
+
+	amd64_read_pci_cfg(pvt->F3, F10_ONLINE_SPARE, &pvt->online_spare);
+
+	amd64_read_dct_pci_cfg(pvt, 0, DCLR0, &pvt->dclr0);
+	amd64_read_dct_pci_cfg(pvt, 0, DCHR0, &pvt->dchr0);
+
+	if (!dct_ganging_enabled(pvt)) {
+		amd64_read_dct_pci_cfg(pvt, 1, DCLR0, &pvt->dclr1);
+		amd64_read_dct_pci_cfg(pvt, 1, DCHR0, &pvt->dchr1);
+	}
+
+skip:
+	read_dct_base_mask(pvt);
+
+	determine_memory_type(pvt);
+	edac_dbg(1, "  DIMM type: %s\n", edac_mem_types[pvt->dram_type]);
+
+	determine_ecc_sym_sz(pvt);
+
+	dump_misc_regs(pvt);
+}
+
+/*
+ * NOTE: CPU Revision Dependent code
+ *
+ * Input:
+ *	@csrow_nr ChipSelect Row Number (0..NUM_CHIPSELECTS-1)
+ *	k8 private pointer to -->
+ *			DRAM Bank Address mapping register
+ *			node_id
+ *			DCL register where dual_channel_active is
+ *
+ * The DBAM register consists of 4 sets of 4 bits each definitions:
+ *
+ * Bits:	CSROWs
+ * 0-3		CSROWs 0 and 1
+ * 4-7		CSROWs 2 and 3
+ * 8-11		CSROWs 4 and 5
+ * 12-15	CSROWs 6 and 7
+ *
+ * Values range from: 0 to 15
+ * The meaning of the values depends on CPU revision and dual-channel state,
+ * see relevant BKDG more info.
+ *
+ * The memory controller provides for total of only 8 CSROWs in its current
+ * architecture. Each "pair" of CSROWs normally represents just one DIMM in
+ * single channel or two (2) DIMMs in dual channel mode.
+ *
+ * The following code logic collapses the various tables for CSROW based on CPU
+ * revision.
+ *
+ * Returns:
+ *	The number of PAGE_SIZE pages on the specified CSROW number it
+ *	encompasses
+ *
+ */
+static u32 get_csrow_nr_pages(struct amd64_pvt *pvt, u8 dct, int csrow_nr_orig)
+{
+	u32 dbam = dct ? pvt->dbam1 : pvt->dbam0;
+	int csrow_nr = csrow_nr_orig;
+	u32 cs_mode, nr_pages;
+
+	if (!pvt->umc)
+		csrow_nr >>= 1;
+
+	cs_mode = DBAM_DIMM(csrow_nr, dbam);
+
+	nr_pages   = pvt->ops->dbam_to_cs(pvt, dct, cs_mode, csrow_nr);
+	nr_pages <<= 20 - PAGE_SHIFT;
+
+	edac_dbg(0, "csrow: %d, channel: %d, DBAM idx: %d\n",
+		    csrow_nr_orig, dct,  cs_mode);
+	edac_dbg(0, "nr_pages/channel: %u\n", nr_pages);
+
+	return nr_pages;
+}
+
+/*
+ * Initialize the array of csrow attribute instances, based on the values
+ * from pci config hardware registers.
+ */
+static int init_csrows(struct mem_ctl_info *mci)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	enum edac_type edac_mode = EDAC_NONE;
+	struct csrow_info *csrow;
+	struct dimm_info *dimm;
+	int i, j, empty = 1;
+	int nr_pages = 0;
+	u32 val;
+
+	if (!pvt->umc) {
+		amd64_read_pci_cfg(pvt->F3, NBCFG, &val);
+
+		pvt->nbcfg = val;
+
+		edac_dbg(0, "node %d, NBCFG=0x%08x[ChipKillEccCap: %d|DramEccEn: %d]\n",
+			 pvt->mc_node_id, val,
+			 !!(val & NBCFG_CHIPKILL), !!(val & NBCFG_ECC_ENABLE));
+	}
+
+	/*
+	 * We iterate over DCT0 here but we look at DCT1 in parallel, if needed.
+	 */
+	for_each_chip_select(i, 0, pvt) {
+		bool row_dct0 = !!csrow_enabled(i, 0, pvt);
+		bool row_dct1 = false;
+
+		if (pvt->fam != 0xf)
+			row_dct1 = !!csrow_enabled(i, 1, pvt);
+
+		if (!row_dct0 && !row_dct1)
+			continue;
+
+		csrow = mci->csrows[i];
+		empty = 0;
+
+		edac_dbg(1, "MC node: %d, csrow: %d\n",
+			    pvt->mc_node_id, i);
+
+		if (row_dct0) {
+			nr_pages = get_csrow_nr_pages(pvt, 0, i);
+			csrow->channels[0]->dimm->nr_pages = nr_pages;
+		}
+
+		/* K8 has only one DCT */
+		if (pvt->fam != 0xf && row_dct1) {
+			int row_dct1_pages = get_csrow_nr_pages(pvt, 1, i);
+
+			csrow->channels[1]->dimm->nr_pages = row_dct1_pages;
+			nr_pages += row_dct1_pages;
+		}
+
+		edac_dbg(1, "Total csrow%d pages: %u\n", i, nr_pages);
+
+		/* Determine DIMM ECC mode: */
+		if (pvt->umc) {
+			if (mci->edac_ctl_cap & EDAC_FLAG_S4ECD4ED)
+				edac_mode = EDAC_S4ECD4ED;
+			else if (mci->edac_ctl_cap & EDAC_FLAG_SECDED)
+				edac_mode = EDAC_SECDED;
+
+		} else if (pvt->nbcfg & NBCFG_ECC_ENABLE) {
+			edac_mode = (pvt->nbcfg & NBCFG_CHIPKILL)
+					? EDAC_S4ECD4ED
+					: EDAC_SECDED;
+		}
+
+		for (j = 0; j < pvt->channel_count; j++) {
+			dimm = csrow->channels[j]->dimm;
+			dimm->mtype = pvt->dram_type;
+			dimm->edac_mode = edac_mode;
+			dimm->grain = 64;
+		}
+	}
+
+	return empty;
+}
+
+/* get all cores on this DCT */
+static void get_cpus_on_this_dct_cpumask(struct cpumask *mask, u16 nid)
+{
+	int cpu;
+
+	for_each_online_cpu(cpu)
+		if (amd_get_nb_id(cpu) == nid)
+			cpumask_set_cpu(cpu, mask);
+}
+
+/* check MCG_CTL on all the cpus on this node */
+static bool nb_mce_bank_enabled_on_node(u16 nid)
+{
+	cpumask_var_t mask;
+	int cpu, nbe;
+	bool ret = false;
+
+	if (!zalloc_cpumask_var(&mask, GFP_KERNEL)) {
+		amd64_warn("%s: Error allocating mask\n", __func__);
+		return false;
+	}
+
+	get_cpus_on_this_dct_cpumask(mask, nid);
+
+	rdmsr_on_cpus(mask, MSR_IA32_MCG_CTL, msrs);
+
+	for_each_cpu(cpu, mask) {
+		struct msr *reg = per_cpu_ptr(msrs, cpu);
+		nbe = reg->l & MSR_MCGCTL_NBE;
+
+		edac_dbg(0, "core: %u, MCG_CTL: 0x%llx, NB MSR is %s\n",
+			 cpu, reg->q,
+			 (nbe ? "enabled" : "disabled"));
+
+		if (!nbe)
+			goto out;
+	}
+	ret = true;
+
+out:
+	free_cpumask_var(mask);
+	return ret;
+}
+
+static int toggle_ecc_err_reporting(struct ecc_settings *s, u16 nid, bool on)
+{
+	cpumask_var_t cmask;
+	int cpu;
+
+	if (!zalloc_cpumask_var(&cmask, GFP_KERNEL)) {
+		amd64_warn("%s: error allocating mask\n", __func__);
+		return -ENOMEM;
+	}
+
+	get_cpus_on_this_dct_cpumask(cmask, nid);
+
+	rdmsr_on_cpus(cmask, MSR_IA32_MCG_CTL, msrs);
+
+	for_each_cpu(cpu, cmask) {
+
+		struct msr *reg = per_cpu_ptr(msrs, cpu);
+
+		if (on) {
+			if (reg->l & MSR_MCGCTL_NBE)
+				s->flags.nb_mce_enable = 1;
+
+			reg->l |= MSR_MCGCTL_NBE;
+		} else {
+			/*
+			 * Turn off NB MCE reporting only when it was off before
+			 */
+			if (!s->flags.nb_mce_enable)
+				reg->l &= ~MSR_MCGCTL_NBE;
+		}
+	}
+	wrmsr_on_cpus(cmask, MSR_IA32_MCG_CTL, msrs);
+
+	free_cpumask_var(cmask);
+
+	return 0;
+}
+
+static bool enable_ecc_error_reporting(struct ecc_settings *s, u16 nid,
+				       struct pci_dev *F3)
+{
+	bool ret = true;
+	u32 value, mask = 0x3;		/* UECC/CECC enable */
+
+	if (toggle_ecc_err_reporting(s, nid, ON)) {
+		amd64_warn("Error enabling ECC reporting over MCGCTL!\n");
+		return false;
+	}
+
+	amd64_read_pci_cfg(F3, NBCTL, &value);
+
+	s->old_nbctl   = value & mask;
+	s->nbctl_valid = true;
+
+	value |= mask;
+	amd64_write_pci_cfg(F3, NBCTL, value);
+
+	amd64_read_pci_cfg(F3, NBCFG, &value);
+
+	edac_dbg(0, "1: node %d, NBCFG=0x%08x[DramEccEn: %d]\n",
+		 nid, value, !!(value & NBCFG_ECC_ENABLE));
+
+	if (!(value & NBCFG_ECC_ENABLE)) {
+		amd64_warn("DRAM ECC disabled on this node, enabling...\n");
+
+		s->flags.nb_ecc_prev = 0;
+
+		/* Attempt to turn on DRAM ECC Enable */
+		value |= NBCFG_ECC_ENABLE;
+		amd64_write_pci_cfg(F3, NBCFG, value);
+
+		amd64_read_pci_cfg(F3, NBCFG, &value);
+
+		if (!(value & NBCFG_ECC_ENABLE)) {
+			amd64_warn("Hardware rejected DRAM ECC enable,"
+				   "check memory DIMM configuration.\n");
+			ret = false;
+		} else {
+			amd64_info("Hardware accepted DRAM ECC Enable\n");
+		}
+	} else {
+		s->flags.nb_ecc_prev = 1;
+	}
+
+	edac_dbg(0, "2: node %d, NBCFG=0x%08x[DramEccEn: %d]\n",
+		 nid, value, !!(value & NBCFG_ECC_ENABLE));
+
+	return ret;
+}
+
+static void restore_ecc_error_reporting(struct ecc_settings *s, u16 nid,
+					struct pci_dev *F3)
+{
+	u32 value, mask = 0x3;		/* UECC/CECC enable */
+
+	if (!s->nbctl_valid)
+		return;
+
+	amd64_read_pci_cfg(F3, NBCTL, &value);
+	value &= ~mask;
+	value |= s->old_nbctl;
+
+	amd64_write_pci_cfg(F3, NBCTL, value);
+
+	/* restore previous BIOS DRAM ECC "off" setting we force-enabled */
+	if (!s->flags.nb_ecc_prev) {
+		amd64_read_pci_cfg(F3, NBCFG, &value);
+		value &= ~NBCFG_ECC_ENABLE;
+		amd64_write_pci_cfg(F3, NBCFG, value);
+	}
+
+	/* restore the NB Enable MCGCTL bit */
+	if (toggle_ecc_err_reporting(s, nid, OFF))
+		amd64_warn("Error restoring NB MCGCTL settings!\n");
+}
+
+/*
+ * EDAC requires that the BIOS have ECC enabled before
+ * taking over the processing of ECC errors. A command line
+ * option allows to force-enable hardware ECC later in
+ * enable_ecc_error_reporting().
+ */
+static const char *ecc_msg =
+	"ECC disabled in the BIOS or no ECC capability, module will not load.\n"
+	" Either enable ECC checking or force module loading by setting "
+	"'ecc_enable_override'.\n"
+	" (Note that use of the override may cause unknown side effects.)\n";
+
+static bool ecc_enabled(struct pci_dev *F3, u16 nid)
+{
+	bool nb_mce_en = false;
+	u8 ecc_en = 0, i;
+	u32 value;
+
+	if (boot_cpu_data.x86 >= 0x17) {
+		u8 umc_en_mask = 0, ecc_en_mask = 0;
+
+		for (i = 0; i < NUM_UMCS; i++) {
+			u32 base = get_umc_base(i);
+
+			/* Only check enabled UMCs. */
+			if (amd_smn_read(nid, base + UMCCH_SDP_CTRL, &value))
+				continue;
+
+			if (!(value & UMC_SDP_INIT))
+				continue;
+
+			umc_en_mask |= BIT(i);
+
+			if (amd_smn_read(nid, base + UMCCH_UMC_CAP_HI, &value))
+				continue;
+
+			if (value & UMC_ECC_ENABLED)
+				ecc_en_mask |= BIT(i);
+		}
+
+		/* Check whether at least one UMC is enabled: */
+		if (umc_en_mask)
+			ecc_en = umc_en_mask == ecc_en_mask;
+		else
+			edac_dbg(0, "Node %d: No enabled UMCs.\n", nid);
+
+		/* Assume UMC MCA banks are enabled. */
+		nb_mce_en = true;
+	} else {
+		amd64_read_pci_cfg(F3, NBCFG, &value);
+
+		ecc_en = !!(value & NBCFG_ECC_ENABLE);
+
+		nb_mce_en = nb_mce_bank_enabled_on_node(nid);
+		if (!nb_mce_en)
+			edac_dbg(0, "NB MCE bank disabled, set MSR 0x%08x[4] on node %d to enable.\n",
+				     MSR_IA32_MCG_CTL, nid);
+	}
+
+	amd64_info("Node %d: DRAM ECC %s.\n",
+		   nid, (ecc_en ? "enabled" : "disabled"));
+
+	if (!ecc_en || !nb_mce_en) {
+		amd64_info("%s", ecc_msg);
+		return false;
+	}
+	return true;
+}
+
+static inline void
+f17h_determine_edac_ctl_cap(struct mem_ctl_info *mci, struct amd64_pvt *pvt)
+{
+	u8 i, ecc_en = 1, cpk_en = 1, dev_x4 = 1, dev_x16 = 1;
+
+	for (i = 0; i < NUM_UMCS; i++) {
+		if (pvt->umc[i].sdp_ctrl & UMC_SDP_INIT) {
+			ecc_en &= !!(pvt->umc[i].umc_cap_hi & UMC_ECC_ENABLED);
+			cpk_en &= !!(pvt->umc[i].umc_cap_hi & UMC_ECC_CHIPKILL_CAP);
+
+			dev_x4  &= !!(pvt->umc[i].dimm_cfg & BIT(6));
+			dev_x16 &= !!(pvt->umc[i].dimm_cfg & BIT(7));
+		}
+	}
+
+	/* Set chipkill only if ECC is enabled: */
+	if (ecc_en) {
+		mci->edac_ctl_cap |= EDAC_FLAG_SECDED;
+
+		if (!cpk_en)
+			return;
+
+		if (dev_x4)
+			mci->edac_ctl_cap |= EDAC_FLAG_S4ECD4ED;
+		else if (dev_x16)
+			mci->edac_ctl_cap |= EDAC_FLAG_S16ECD16ED;
+		else
+			mci->edac_ctl_cap |= EDAC_FLAG_S8ECD8ED;
+	}
+}
+
+static void setup_mci_misc_attrs(struct mem_ctl_info *mci,
+				 struct amd64_family_type *fam)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+
+	mci->mtype_cap		= MEM_FLAG_DDR2 | MEM_FLAG_RDDR2;
+	mci->edac_ctl_cap	= EDAC_FLAG_NONE;
+
+	if (pvt->umc) {
+		f17h_determine_edac_ctl_cap(mci, pvt);
+	} else {
+		if (pvt->nbcap & NBCAP_SECDED)
+			mci->edac_ctl_cap |= EDAC_FLAG_SECDED;
+
+		if (pvt->nbcap & NBCAP_CHIPKILL)
+			mci->edac_ctl_cap |= EDAC_FLAG_S4ECD4ED;
+	}
+
+	mci->edac_cap		= determine_edac_cap(pvt);
+	mci->mod_name		= EDAC_MOD_STR;
+	mci->ctl_name		= fam->ctl_name;
+	mci->dev_name		= pci_name(pvt->F3);
+	mci->ctl_page_to_phys	= NULL;
+
+	/* memory scrubber interface */
+	mci->set_sdram_scrub_rate = set_scrub_rate;
+	mci->get_sdram_scrub_rate = get_scrub_rate;
+}
+
+/*
+ * returns a pointer to the family descriptor on success, NULL otherwise.
+ */
+static struct amd64_family_type *per_family_init(struct amd64_pvt *pvt)
+{
+	struct amd64_family_type *fam_type = NULL;
+
+	pvt->ext_model  = boot_cpu_data.x86_model >> 4;
+	pvt->stepping	= boot_cpu_data.x86_stepping;
+	pvt->model	= boot_cpu_data.x86_model;
+	pvt->fam	= boot_cpu_data.x86;
+
+	switch (pvt->fam) {
+	case 0xf:
+		fam_type	= &family_types[K8_CPUS];
+		pvt->ops	= &family_types[K8_CPUS].ops;
+		break;
+
+	case 0x10:
+		fam_type	= &family_types[F10_CPUS];
+		pvt->ops	= &family_types[F10_CPUS].ops;
+		break;
+
+	case 0x15:
+		if (pvt->model == 0x30) {
+			fam_type = &family_types[F15_M30H_CPUS];
+			pvt->ops = &family_types[F15_M30H_CPUS].ops;
+			break;
+		} else if (pvt->model == 0x60) {
+			fam_type = &family_types[F15_M60H_CPUS];
+			pvt->ops = &family_types[F15_M60H_CPUS].ops;
+			break;
+		}
+
+		fam_type	= &family_types[F15_CPUS];
+		pvt->ops	= &family_types[F15_CPUS].ops;
+		break;
+
+	case 0x16:
+		if (pvt->model == 0x30) {
+			fam_type = &family_types[F16_M30H_CPUS];
+			pvt->ops = &family_types[F16_M30H_CPUS].ops;
+			break;
+		}
+		fam_type	= &family_types[F16_CPUS];
+		pvt->ops	= &family_types[F16_CPUS].ops;
+		break;
+
+	case 0x17:
+		if (pvt->model >= 0x10 && pvt->model <= 0x2f) {
+			fam_type = &family_types[F17_M10H_CPUS];
+			pvt->ops = &family_types[F17_M10H_CPUS].ops;
+			break;
+		} else if (pvt->model >= 0x30 && pvt->model <= 0x3f) {
+			fam_type = &family_types[F17_M30H_CPUS];
+			pvt->ops = &family_types[F17_M30H_CPUS].ops;
+			break;
+		}
+		fam_type	= &family_types[F17_CPUS];
+		pvt->ops	= &family_types[F17_CPUS].ops;
+		break;
+
+	default:
+		amd64_err("Unsupported family!\n");
+		return NULL;
+	}
+
+	amd64_info("%s %sdetected (node %d).\n", fam_type->ctl_name,
+		     (pvt->fam == 0xf ?
+				(pvt->ext_model >= K8_REV_F  ? "revF or later "
+							     : "revE or earlier ")
+				 : ""), pvt->mc_node_id);
+	return fam_type;
+}
+
+static const struct attribute_group *amd64_edac_attr_groups[] = {
+#ifdef CONFIG_EDAC_DEBUG
+	&amd64_edac_dbg_group,
+#endif
+#ifdef CONFIG_EDAC_AMD64_ERROR_INJECTION
+	&amd64_edac_inj_group,
+#endif
+	NULL
+};
+
+static int init_one_instance(unsigned int nid)
+{
+	struct pci_dev *F3 = node_to_amd_nb(nid)->misc;
+	struct amd64_family_type *fam_type = NULL;
+	struct mem_ctl_info *mci = NULL;
+	struct edac_mc_layer layers[2];
+	struct amd64_pvt *pvt = NULL;
+	u16 pci_id1, pci_id2;
+	int err = 0, ret;
+
+	ret = -ENOMEM;
+	pvt = kzalloc(sizeof(struct amd64_pvt), GFP_KERNEL);
+	if (!pvt)
+		goto err_ret;
+
+	pvt->mc_node_id	= nid;
+	pvt->F3 = F3;
+
+	ret = -EINVAL;
+	fam_type = per_family_init(pvt);
+	if (!fam_type)
+		goto err_free;
+
+	if (pvt->fam >= 0x17) {
+		pvt->umc = kcalloc(NUM_UMCS, sizeof(struct amd64_umc), GFP_KERNEL);
+		if (!pvt->umc) {
+			ret = -ENOMEM;
+			goto err_free;
+		}
+
+		pci_id1 = fam_type->f0_id;
+		pci_id2 = fam_type->f6_id;
+	} else {
+		pci_id1 = fam_type->f1_id;
+		pci_id2 = fam_type->f2_id;
+	}
+
+	err = reserve_mc_sibling_devs(pvt, pci_id1, pci_id2);
+	if (err)
+		goto err_post_init;
+
+	read_mc_regs(pvt);
+
+	/*
+	 * We need to determine how many memory channels there are. Then use
+	 * that information for calculating the size of the dynamic instance
+	 * tables in the 'mci' structure.
+	 */
+	ret = -EINVAL;
+	pvt->channel_count = pvt->ops->early_channel_count(pvt);
+	if (pvt->channel_count < 0)
+		goto err_siblings;
+
+	ret = -ENOMEM;
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = pvt->csels[0].b_cnt;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+
+	/*
+	 * Always allocate two channels since we can have setups with DIMMs on
+	 * only one channel. Also, this simplifies handling later for the price
+	 * of a couple of KBs tops.
+	 */
+	layers[1].size = 2;
+	layers[1].is_virt_csrow = false;
+
+	mci = edac_mc_alloc(nid, ARRAY_SIZE(layers), layers, 0);
+	if (!mci)
+		goto err_siblings;
+
+	mci->pvt_info = pvt;
+	mci->pdev = &pvt->F3->dev;
+
+	setup_mci_misc_attrs(mci, fam_type);
+
+	if (init_csrows(mci))
+		mci->edac_cap = EDAC_FLAG_NONE;
+
+	ret = -ENODEV;
+	if (edac_mc_add_mc_with_groups(mci, amd64_edac_attr_groups)) {
+		edac_dbg(1, "failed edac_mc_add_mc()\n");
+		goto err_add_mc;
+	}
+
+	return 0;
+
+err_add_mc:
+	edac_mc_free(mci);
+
+err_siblings:
+	free_mc_sibling_devs(pvt);
+
+err_post_init:
+	if (pvt->fam >= 0x17)
+		kfree(pvt->umc);
+
+err_free:
+	kfree(pvt);
+
+err_ret:
+	return ret;
+}
+
+static int probe_one_instance(unsigned int nid)
+{
+	struct pci_dev *F3 = node_to_amd_nb(nid)->misc;
+	struct ecc_settings *s;
+	int ret;
+
+	ret = -ENOMEM;
+	s = kzalloc(sizeof(struct ecc_settings), GFP_KERNEL);
+	if (!s)
+		goto err_out;
+
+	ecc_stngs[nid] = s;
+
+	if (!ecc_enabled(F3, nid)) {
+		ret = 0;
+
+		if (!ecc_enable_override)
+			goto err_enable;
+
+		if (boot_cpu_data.x86 >= 0x17) {
+			amd64_warn("Forcing ECC on is not recommended on newer systems. Please enable ECC in BIOS.");
+			goto err_enable;
+		} else
+			amd64_warn("Forcing ECC on!\n");
+
+		if (!enable_ecc_error_reporting(s, nid, F3))
+			goto err_enable;
+	}
+
+	ret = init_one_instance(nid);
+	if (ret < 0) {
+		amd64_err("Error probing instance: %d\n", nid);
+
+		if (boot_cpu_data.x86 < 0x17)
+			restore_ecc_error_reporting(s, nid, F3);
+
+		goto err_enable;
+	}
+
+	return ret;
+
+err_enable:
+	kfree(s);
+	ecc_stngs[nid] = NULL;
+
+err_out:
+	return ret;
+}
+
+static void remove_one_instance(unsigned int nid)
+{
+	struct pci_dev *F3 = node_to_amd_nb(nid)->misc;
+	struct ecc_settings *s = ecc_stngs[nid];
+	struct mem_ctl_info *mci;
+	struct amd64_pvt *pvt;
+
+	mci = find_mci_by_dev(&F3->dev);
+	WARN_ON(!mci);
+
+	/* Remove from EDAC CORE tracking list */
+	mci = edac_mc_del_mc(&F3->dev);
+	if (!mci)
+		return;
+
+	pvt = mci->pvt_info;
+
+	restore_ecc_error_reporting(s, nid, F3);
+
+	free_mc_sibling_devs(pvt);
+
+	kfree(ecc_stngs[nid]);
+	ecc_stngs[nid] = NULL;
+
+	/* Free the EDAC CORE resources */
+	mci->pvt_info = NULL;
+
+	kfree(pvt);
+	edac_mc_free(mci);
+}
+
+static void setup_pci_device(void)
+{
+	if (pci_ctl)
+		return;
+
+	pci_ctl = edac_pci_create_generic_ctl(pci_ctl_dev, EDAC_MOD_STR);
+	if (!pci_ctl) {
+		pr_warn("%s(): Unable to create PCI control\n", __func__);
+		pr_warn("%s(): PCI error report via EDAC not set\n", __func__);
+	}
+}
+
+static const struct x86_cpu_id amd64_cpuids[] = {
+	{ X86_VENDOR_AMD, 0xF,	X86_MODEL_ANY,	X86_FEATURE_ANY, 0 },
+	{ X86_VENDOR_AMD, 0x10, X86_MODEL_ANY,	X86_FEATURE_ANY, 0 },
+	{ X86_VENDOR_AMD, 0x15, X86_MODEL_ANY,	X86_FEATURE_ANY, 0 },
+	{ X86_VENDOR_AMD, 0x16, X86_MODEL_ANY,	X86_FEATURE_ANY, 0 },
+	{ X86_VENDOR_AMD, 0x17, X86_MODEL_ANY,	X86_FEATURE_ANY, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(x86cpu, amd64_cpuids);
+
+static int __init amd64_edac_init(void)
+{
+	const char *owner;
+	int err = -ENODEV;
+	int i;
+
+	owner = edac_get_owner();
+	if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR)))
+		return -EBUSY;
+
+	if (!x86_match_cpu(amd64_cpuids))
+		return -ENODEV;
+
+	if (amd_cache_northbridges() < 0)
+		return -ENODEV;
+
+	opstate_init();
+
+	err = -ENOMEM;
+	ecc_stngs = kcalloc(amd_nb_num(), sizeof(ecc_stngs[0]), GFP_KERNEL);
+	if (!ecc_stngs)
+		goto err_free;
+
+	msrs = msrs_alloc();
+	if (!msrs)
+		goto err_free;
+
+	for (i = 0; i < amd_nb_num(); i++) {
+		err = probe_one_instance(i);
+		if (err) {
+			/* unwind properly */
+			while (--i >= 0)
+				remove_one_instance(i);
+
+			goto err_pci;
+		}
+	}
+
+	if (!edac_has_mcs()) {
+		err = -ENODEV;
+		goto err_pci;
+	}
+
+	/* register stuff with EDAC MCE */
+	if (report_gart_errors)
+		amd_report_gart_errors(true);
+
+	if (boot_cpu_data.x86 >= 0x17)
+		amd_register_ecc_decoder(decode_umc_error);
+	else
+		amd_register_ecc_decoder(decode_bus_error);
+
+	setup_pci_device();
+
+#ifdef CONFIG_X86_32
+	amd64_err("%s on 32-bit is unsupported. USE AT YOUR OWN RISK!\n", EDAC_MOD_STR);
+#endif
+
+	printk(KERN_INFO "AMD64 EDAC driver v%s\n", EDAC_AMD64_VERSION);
+
+	return 0;
+
+err_pci:
+	pci_ctl_dev = NULL;
+
+	msrs_free(msrs);
+	msrs = NULL;
+
+err_free:
+	kfree(ecc_stngs);
+	ecc_stngs = NULL;
+
+	return err;
+}
+
+static void __exit amd64_edac_exit(void)
+{
+	int i;
+
+	if (pci_ctl)
+		edac_pci_release_generic_ctl(pci_ctl);
+
+	/* unregister from EDAC MCE */
+	amd_report_gart_errors(false);
+
+	if (boot_cpu_data.x86 >= 0x17)
+		amd_unregister_ecc_decoder(decode_umc_error);
+	else
+		amd_unregister_ecc_decoder(decode_bus_error);
+
+	for (i = 0; i < amd_nb_num(); i++)
+		remove_one_instance(i);
+
+	kfree(ecc_stngs);
+	ecc_stngs = NULL;
+
+	pci_ctl_dev = NULL;
+
+	msrs_free(msrs);
+	msrs = NULL;
+}
+
+module_init(amd64_edac_init);
+module_exit(amd64_edac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("SoftwareBitMaker: Doug Thompson, "
+		"Dave Peterson, Thayne Harbaugh");
+MODULE_DESCRIPTION("MC support for AMD64 memory controllers - "
+		EDAC_AMD64_VERSION);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
new file mode 100644
index 000000000..de8dbb0b4
--- /dev/null
+++ b/drivers/edac/amd64_edac.h
@@ -0,0 +1,534 @@
+/*
+ * AMD64 class Memory Controller kernel module
+ *
+ * Copyright (c) 2009 SoftwareBitMaker.
+ * Copyright (c) 2009-15 Advanced Micro Devices, Inc.
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ */
+
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/mmzone.h>
+#include <linux/edac.h>
+#include <asm/cpu_device_id.h>
+#include <asm/msr.h>
+#include "edac_module.h"
+#include "mce_amd.h"
+
+#define amd64_info(fmt, arg...) \
+	edac_printk(KERN_INFO, "amd64", fmt, ##arg)
+
+#define amd64_warn(fmt, arg...) \
+	edac_printk(KERN_WARNING, "amd64", "Warning: " fmt, ##arg)
+
+#define amd64_err(fmt, arg...) \
+	edac_printk(KERN_ERR, "amd64", "Error: " fmt, ##arg)
+
+#define amd64_mc_warn(mci, fmt, arg...) \
+	edac_mc_chipset_printk(mci, KERN_WARNING, "amd64", fmt, ##arg)
+
+#define amd64_mc_err(mci, fmt, arg...) \
+	edac_mc_chipset_printk(mci, KERN_ERR, "amd64", fmt, ##arg)
+
+/*
+ * Throughout the comments in this code, the following terms are used:
+ *
+ *	SysAddr, DramAddr, and InputAddr
+ *
+ *  These terms come directly from the amd64 documentation
+ * (AMD publication #26094).  They are defined as follows:
+ *
+ *     SysAddr:
+ *         This is a physical address generated by a CPU core or a device
+ *         doing DMA.  If generated by a CPU core, a SysAddr is the result of
+ *         a virtual to physical address translation by the CPU core's address
+ *         translation mechanism (MMU).
+ *
+ *     DramAddr:
+ *         A DramAddr is derived from a SysAddr by subtracting an offset that
+ *         depends on which node the SysAddr maps to and whether the SysAddr
+ *         is within a range affected by memory hoisting.  The DRAM Base
+ *         (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers
+ *         determine which node a SysAddr maps to.
+ *
+ *         If the DRAM Hole Address Register (DHAR) is enabled and the SysAddr
+ *         is within the range of addresses specified by this register, then
+ *         a value x from the DHAR is subtracted from the SysAddr to produce a
+ *         DramAddr.  Here, x represents the base address for the node that
+ *         the SysAddr maps to plus an offset due to memory hoisting.  See
+ *         section 3.4.8 and the comments in amd64_get_dram_hole_info() and
+ *         sys_addr_to_dram_addr() below for more information.
+ *
+ *         If the SysAddr is not affected by the DHAR then a value y is
+ *         subtracted from the SysAddr to produce a DramAddr.  Here, y is the
+ *         base address for the node that the SysAddr maps to.  See section
+ *         3.4.4 and the comments in sys_addr_to_dram_addr() below for more
+ *         information.
+ *
+ *     InputAddr:
+ *         A DramAddr is translated to an InputAddr before being passed to the
+ *         memory controller for the node that the DramAddr is associated
+ *         with.  The memory controller then maps the InputAddr to a csrow.
+ *         If node interleaving is not in use, then the InputAddr has the same
+ *         value as the DramAddr.  Otherwise, the InputAddr is produced by
+ *         discarding the bits used for node interleaving from the DramAddr.
+ *         See section 3.4.4 for more information.
+ *
+ *         The memory controller for a given node uses its DRAM CS Base and
+ *         DRAM CS Mask registers to map an InputAddr to a csrow.  See
+ *         sections 3.5.4 and 3.5.5 for more information.
+ */
+
+#define EDAC_AMD64_VERSION		"3.5.0"
+#define EDAC_MOD_STR			"amd64_edac"
+
+/* Extended Model from CPUID, for CPU Revision numbers */
+#define K8_REV_D			1
+#define K8_REV_E			2
+#define K8_REV_F			4
+
+/* Hardware limit on ChipSelect rows per MC and processors per system */
+#define NUM_CHIPSELECTS			8
+#define DRAM_RANGES			8
+
+#define ON true
+#define OFF false
+
+/*
+ * PCI-defined configuration space registers
+ */
+#define PCI_DEVICE_ID_AMD_15H_NB_F1	0x1601
+#define PCI_DEVICE_ID_AMD_15H_NB_F2	0x1602
+#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 0x141b
+#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 0x141c
+#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F1 0x1571
+#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F2 0x1572
+#define PCI_DEVICE_ID_AMD_16H_NB_F1	0x1531
+#define PCI_DEVICE_ID_AMD_16H_NB_F2	0x1532
+#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F1 0x1581
+#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F2 0x1582
+#define PCI_DEVICE_ID_AMD_17H_DF_F0	0x1460
+#define PCI_DEVICE_ID_AMD_17H_DF_F6	0x1466
+#define PCI_DEVICE_ID_AMD_17H_M10H_DF_F0 0x15e8
+#define PCI_DEVICE_ID_AMD_17H_M10H_DF_F6 0x15ee
+#define PCI_DEVICE_ID_AMD_17H_M30H_DF_F0 0x1490
+#define PCI_DEVICE_ID_AMD_17H_M30H_DF_F6 0x1496
+
+/*
+ * Function 1 - Address Map
+ */
+#define DRAM_BASE_LO			0x40
+#define DRAM_LIMIT_LO			0x44
+
+/*
+ * F15 M30h D18F1x2[1C:00]
+ */
+#define DRAM_CONT_BASE			0x200
+#define DRAM_CONT_LIMIT			0x204
+
+/*
+ * F15 M30h D18F1x2[4C:40]
+ */
+#define DRAM_CONT_HIGH_OFF		0x240
+
+#define dram_rw(pvt, i)			((u8)(pvt->ranges[i].base.lo & 0x3))
+#define dram_intlv_sel(pvt, i)		((u8)((pvt->ranges[i].lim.lo >> 8) & 0x7))
+#define dram_dst_node(pvt, i)		((u8)(pvt->ranges[i].lim.lo & 0x7))
+
+#define DHAR				0xf0
+#define dhar_mem_hoist_valid(pvt)	((pvt)->dhar & BIT(1))
+#define dhar_base(pvt)			((pvt)->dhar & 0xff000000)
+#define k8_dhar_offset(pvt)		(((pvt)->dhar & 0x0000ff00) << 16)
+
+					/* NOTE: Extra mask bit vs K8 */
+#define f10_dhar_offset(pvt)		(((pvt)->dhar & 0x0000ff80) << 16)
+
+#define DCT_CFG_SEL			0x10C
+
+#define DRAM_LOCAL_NODE_BASE		0x120
+#define DRAM_LOCAL_NODE_LIM		0x124
+
+#define DRAM_BASE_HI			0x140
+#define DRAM_LIMIT_HI			0x144
+
+
+/*
+ * Function 2 - DRAM controller
+ */
+#define DCSB0				0x40
+#define DCSB1				0x140
+#define DCSB_CS_ENABLE			BIT(0)
+
+#define DCSM0				0x60
+#define DCSM1				0x160
+
+#define csrow_enabled(i, dct, pvt)	((pvt)->csels[(dct)].csbases[(i)] & DCSB_CS_ENABLE)
+
+#define DRAM_CONTROL			0x78
+
+#define DBAM0				0x80
+#define DBAM1				0x180
+
+/* Extract the DIMM 'type' on the i'th DIMM from the DBAM reg value passed */
+#define DBAM_DIMM(i, reg)		((((reg) >> (4*(i)))) & 0xF)
+
+#define DBAM_MAX_VALUE			11
+
+#define DCLR0				0x90
+#define DCLR1				0x190
+#define REVE_WIDTH_128			BIT(16)
+#define WIDTH_128			BIT(11)
+
+#define DCHR0				0x94
+#define DCHR1				0x194
+#define DDR3_MODE			BIT(8)
+
+#define DCT_SEL_LO			0x110
+#define dct_high_range_enabled(pvt)	((pvt)->dct_sel_lo & BIT(0))
+#define dct_interleave_enabled(pvt)	((pvt)->dct_sel_lo & BIT(2))
+
+#define dct_ganging_enabled(pvt)	((boot_cpu_data.x86 == 0x10) && ((pvt)->dct_sel_lo & BIT(4)))
+
+#define dct_data_intlv_enabled(pvt)	((pvt)->dct_sel_lo & BIT(5))
+#define dct_memory_cleared(pvt)		((pvt)->dct_sel_lo & BIT(10))
+
+#define SWAP_INTLV_REG			0x10c
+
+#define DCT_SEL_HI			0x114
+
+#define F15H_M60H_SCRCTRL		0x1C8
+#define F17H_SCR_BASE_ADDR		0x48
+#define F17H_SCR_LIMIT_ADDR		0x4C
+
+/*
+ * Function 3 - Misc Control
+ */
+#define NBCTL				0x40
+
+#define NBCFG				0x44
+#define NBCFG_CHIPKILL			BIT(23)
+#define NBCFG_ECC_ENABLE		BIT(22)
+
+/* F3x48: NBSL */
+#define F10_NBSL_EXT_ERR_ECC		0x8
+#define NBSL_PP_OBS			0x2
+
+#define SCRCTRL				0x58
+
+#define F10_ONLINE_SPARE		0xB0
+#define online_spare_swap_done(pvt, c)	(((pvt)->online_spare >> (1 + 2 * (c))) & 0x1)
+#define online_spare_bad_dramcs(pvt, c)	(((pvt)->online_spare >> (4 + 4 * (c))) & 0x7)
+
+#define F10_NB_ARRAY_ADDR		0xB8
+#define F10_NB_ARRAY_DRAM		BIT(31)
+
+/* Bits [2:1] are used to select 16-byte section within a 64-byte cacheline  */
+#define SET_NB_ARRAY_ADDR(section)	(((section) & 0x3) << 1)
+
+#define F10_NB_ARRAY_DATA		0xBC
+#define F10_NB_ARR_ECC_WR_REQ		BIT(17)
+#define SET_NB_DRAM_INJECTION_WRITE(inj)  \
+					(BIT(((inj.word) & 0xF) + 20) | \
+					F10_NB_ARR_ECC_WR_REQ | inj.bit_map)
+#define SET_NB_DRAM_INJECTION_READ(inj)  \
+					(BIT(((inj.word) & 0xF) + 20) | \
+					BIT(16) |  inj.bit_map)
+
+
+#define NBCAP				0xE8
+#define NBCAP_CHIPKILL			BIT(4)
+#define NBCAP_SECDED			BIT(3)
+#define NBCAP_DCT_DUAL			BIT(0)
+
+#define EXT_NB_MCA_CFG			0x180
+
+/* MSRs */
+#define MSR_MCGCTL_NBE			BIT(4)
+
+/* F17h */
+
+/* F0: */
+#define DF_DHAR				0x104
+
+/* UMC CH register offsets */
+#define UMCCH_BASE_ADDR			0x0
+#define UMCCH_ADDR_MASK			0x20
+#define UMCCH_ADDR_CFG			0x30
+#define UMCCH_DIMM_CFG			0x80
+#define UMCCH_UMC_CFG			0x100
+#define UMCCH_SDP_CTRL			0x104
+#define UMCCH_ECC_CTRL			0x14C
+#define UMCCH_ECC_BAD_SYMBOL		0xD90
+#define UMCCH_UMC_CAP			0xDF0
+#define UMCCH_UMC_CAP_HI		0xDF4
+
+/* UMC CH bitfields */
+#define UMC_ECC_CHIPKILL_CAP		BIT(31)
+#define UMC_ECC_ENABLED			BIT(30)
+
+#define UMC_SDP_INIT			BIT(31)
+
+#define NUM_UMCS			2
+
+enum amd_families {
+	K8_CPUS = 0,
+	F10_CPUS,
+	F15_CPUS,
+	F15_M30H_CPUS,
+	F15_M60H_CPUS,
+	F16_CPUS,
+	F16_M30H_CPUS,
+	F17_CPUS,
+	F17_M10H_CPUS,
+	F17_M30H_CPUS,
+	NUM_FAMILIES,
+};
+
+/* Error injection control structure */
+struct error_injection {
+	u32	 section;
+	u32	 word;
+	u32	 bit_map;
+};
+
+/* low and high part of PCI config space regs */
+struct reg_pair {
+	u32 lo, hi;
+};
+
+/*
+ * See F1x[1, 0][7C:40] DRAM Base/Limit Registers
+ */
+struct dram_range {
+	struct reg_pair base;
+	struct reg_pair lim;
+};
+
+/* A DCT chip selects collection */
+struct chip_select {
+	u32 csbases[NUM_CHIPSELECTS];
+	u8 b_cnt;
+
+	u32 csmasks[NUM_CHIPSELECTS];
+	u8 m_cnt;
+};
+
+struct amd64_umc {
+	u32 dimm_cfg;		/* DIMM Configuration reg */
+	u32 umc_cfg;		/* Configuration reg */
+	u32 sdp_ctrl;		/* SDP Control reg */
+	u32 ecc_ctrl;		/* DRAM ECC Control reg */
+	u32 umc_cap_hi;		/* Capabilities High reg */
+};
+
+struct amd64_pvt {
+	struct low_ops *ops;
+
+	/* pci_device handles which we utilize */
+	struct pci_dev *F0, *F1, *F2, *F3, *F6;
+
+	u16 mc_node_id;		/* MC index of this MC node */
+	u8 fam;			/* CPU family */
+	u8 model;		/* ... model */
+	u8 stepping;		/* ... stepping */
+
+	int ext_model;		/* extended model value of this node */
+	int channel_count;
+
+	/* Raw registers */
+	u32 dclr0;		/* DRAM Configuration Low DCT0 reg */
+	u32 dclr1;		/* DRAM Configuration Low DCT1 reg */
+	u32 dchr0;		/* DRAM Configuration High DCT0 reg */
+	u32 dchr1;		/* DRAM Configuration High DCT1 reg */
+	u32 nbcap;		/* North Bridge Capabilities */
+	u32 nbcfg;		/* F10 North Bridge Configuration */
+	u32 ext_nbcfg;		/* Extended F10 North Bridge Configuration */
+	u32 dhar;		/* DRAM Hoist reg */
+	u32 dbam0;		/* DRAM Base Address Mapping reg for DCT0 */
+	u32 dbam1;		/* DRAM Base Address Mapping reg for DCT1 */
+
+	/* one for each DCT */
+	struct chip_select csels[2];
+
+	/* DRAM base and limit pairs F1x[78,70,68,60,58,50,48,40] */
+	struct dram_range ranges[DRAM_RANGES];
+
+	u64 top_mem;		/* top of memory below 4GB */
+	u64 top_mem2;		/* top of memory above 4GB */
+
+	u32 dct_sel_lo;		/* DRAM Controller Select Low */
+	u32 dct_sel_hi;		/* DRAM Controller Select High */
+	u32 online_spare;	/* On-Line spare Reg */
+
+	/* x4 or x8 syndromes in use */
+	u8 ecc_sym_sz;
+
+	/* place to store error injection parameters prior to issue */
+	struct error_injection injection;
+
+	/* cache the dram_type */
+	enum mem_type dram_type;
+
+	struct amd64_umc *umc;	/* UMC registers */
+};
+
+enum err_codes {
+	DECODE_OK	=  0,
+	ERR_NODE	= -1,
+	ERR_CSROW	= -2,
+	ERR_CHANNEL	= -3,
+	ERR_SYND	= -4,
+	ERR_NORM_ADDR	= -5,
+};
+
+struct err_info {
+	int err_code;
+	struct mem_ctl_info *src_mci;
+	int csrow;
+	int channel;
+	u16 syndrome;
+	u32 page;
+	u32 offset;
+};
+
+static inline u32 get_umc_base(u8 channel)
+{
+	/* ch0: 0x50000, ch1: 0x150000 */
+	return 0x50000 + (!!channel << 20);
+}
+
+static inline u64 get_dram_base(struct amd64_pvt *pvt, u8 i)
+{
+	u64 addr = ((u64)pvt->ranges[i].base.lo & 0xffff0000) << 8;
+
+	if (boot_cpu_data.x86 == 0xf)
+		return addr;
+
+	return (((u64)pvt->ranges[i].base.hi & 0x000000ff) << 40) | addr;
+}
+
+static inline u64 get_dram_limit(struct amd64_pvt *pvt, u8 i)
+{
+	u64 lim = (((u64)pvt->ranges[i].lim.lo & 0xffff0000) << 8) | 0x00ffffff;
+
+	if (boot_cpu_data.x86 == 0xf)
+		return lim;
+
+	return (((u64)pvt->ranges[i].lim.hi & 0x000000ff) << 40) | lim;
+}
+
+static inline u16 extract_syndrome(u64 status)
+{
+	return ((status >> 47) & 0xff) | ((status >> 16) & 0xff00);
+}
+
+static inline u8 dct_sel_interleave_addr(struct amd64_pvt *pvt)
+{
+	if (pvt->fam == 0x15 && pvt->model >= 0x30)
+		return (((pvt->dct_sel_hi >> 9) & 0x1) << 2) |
+			((pvt->dct_sel_lo >> 6) & 0x3);
+
+	return	((pvt)->dct_sel_lo >> 6) & 0x3;
+}
+/*
+ * per-node ECC settings descriptor
+ */
+struct ecc_settings {
+	u32 old_nbctl;
+	bool nbctl_valid;
+
+	struct flags {
+		unsigned long nb_mce_enable:1;
+		unsigned long nb_ecc_prev:1;
+	} flags;
+};
+
+#ifdef CONFIG_EDAC_DEBUG
+extern const struct attribute_group amd64_edac_dbg_group;
+#endif
+
+#ifdef CONFIG_EDAC_AMD64_ERROR_INJECTION
+extern const struct attribute_group amd64_edac_inj_group;
+#endif
+
+/*
+ * Each of the PCI Device IDs types have their own set of hardware accessor
+ * functions and per device encoding/decoding logic.
+ */
+struct low_ops {
+	int (*early_channel_count)	(struct amd64_pvt *pvt);
+	void (*map_sysaddr_to_csrow)	(struct mem_ctl_info *mci, u64 sys_addr,
+					 struct err_info *);
+	int (*dbam_to_cs)		(struct amd64_pvt *pvt, u8 dct,
+					 unsigned cs_mode, int cs_mask_nr);
+};
+
+struct amd64_family_type {
+	const char *ctl_name;
+	u16 f0_id, f1_id, f2_id, f6_id;
+	struct low_ops ops;
+};
+
+int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
+			       u32 *val, const char *func);
+int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset,
+				u32 val, const char *func);
+
+#define amd64_read_pci_cfg(pdev, offset, val)	\
+	__amd64_read_pci_cfg_dword(pdev, offset, val, __func__)
+
+#define amd64_write_pci_cfg(pdev, offset, val)	\
+	__amd64_write_pci_cfg_dword(pdev, offset, val, __func__)
+
+int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
+			     u64 *hole_offset, u64 *hole_size);
+
+#define to_mci(k) container_of(k, struct mem_ctl_info, dev)
+
+/* Injection helpers */
+static inline void disable_caches(void *dummy)
+{
+	write_cr0(read_cr0() | X86_CR0_CD);
+	wbinvd();
+}
+
+static inline void enable_caches(void *dummy)
+{
+	write_cr0(read_cr0() & ~X86_CR0_CD);
+}
+
+static inline u8 dram_intlv_en(struct amd64_pvt *pvt, unsigned int i)
+{
+	if (pvt->fam == 0x15 && pvt->model >= 0x30) {
+		u32 tmp;
+		amd64_read_pci_cfg(pvt->F1, DRAM_CONT_LIMIT, &tmp);
+		return (u8) tmp & 0xF;
+	}
+	return (u8) (pvt->ranges[i].base.lo >> 8) & 0x7;
+}
+
+static inline u8 dhar_valid(struct amd64_pvt *pvt)
+{
+	if (pvt->fam == 0x15 && pvt->model >= 0x30) {
+		u32 tmp;
+		amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp);
+		return (tmp >> 1) & BIT(0);
+	}
+	return (pvt)->dhar & BIT(0);
+}
+
+static inline u32 dct_sel_baseaddr(struct amd64_pvt *pvt)
+{
+	if (pvt->fam == 0x15 && pvt->model >= 0x30) {
+		u32 tmp;
+		amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp);
+		return (tmp >> 11) & 0x1FFF;
+	}
+	return (pvt)->dct_sel_lo & 0xFFFFF800;
+}
diff --git a/drivers/edac/amd64_edac_dbg.c b/drivers/edac/amd64_edac_dbg.c
new file mode 100644
index 000000000..393be3351
--- /dev/null
+++ b/drivers/edac/amd64_edac_dbg.c
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "amd64_edac.h"
+
+#define EDAC_DCT_ATTR_SHOW(reg)						\
+static ssize_t amd64_##reg##_show(struct device *dev,			\
+			       struct device_attribute *mattr,		\
+			       char *data)				\
+{									\
+	struct mem_ctl_info *mci = to_mci(dev);				\
+	struct amd64_pvt *pvt = mci->pvt_info;				\
+		return sprintf(data, "0x%016llx\n", (u64)pvt->reg);	\
+}
+
+EDAC_DCT_ATTR_SHOW(dhar);
+EDAC_DCT_ATTR_SHOW(dbam0);
+EDAC_DCT_ATTR_SHOW(top_mem);
+EDAC_DCT_ATTR_SHOW(top_mem2);
+
+static ssize_t amd64_hole_show(struct device *dev,
+			       struct device_attribute *mattr,
+			       char *data)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+
+	u64 hole_base = 0;
+	u64 hole_offset = 0;
+	u64 hole_size = 0;
+
+	amd64_get_dram_hole_info(mci, &hole_base, &hole_offset, &hole_size);
+
+	return sprintf(data, "%llx %llx %llx\n", hole_base, hole_offset,
+						 hole_size);
+}
+
+/*
+ * update NUM_DBG_ATTRS in case you add new members
+ */
+static DEVICE_ATTR(dhar, S_IRUGO, amd64_dhar_show, NULL);
+static DEVICE_ATTR(dbam, S_IRUGO, amd64_dbam0_show, NULL);
+static DEVICE_ATTR(topmem, S_IRUGO, amd64_top_mem_show, NULL);
+static DEVICE_ATTR(topmem2, S_IRUGO, amd64_top_mem2_show, NULL);
+static DEVICE_ATTR(dram_hole, S_IRUGO, amd64_hole_show, NULL);
+
+static struct attribute *amd64_edac_dbg_attrs[] = {
+	&dev_attr_dhar.attr,
+	&dev_attr_dbam.attr,
+	&dev_attr_topmem.attr,
+	&dev_attr_topmem2.attr,
+	&dev_attr_dram_hole.attr,
+	NULL
+};
+
+const struct attribute_group amd64_edac_dbg_group = {
+	.attrs = amd64_edac_dbg_attrs,
+};
diff --git a/drivers/edac/amd64_edac_inj.c b/drivers/edac/amd64_edac_inj.c
new file mode 100644
index 000000000..d96d6116f
--- /dev/null
+++ b/drivers/edac/amd64_edac_inj.c
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "amd64_edac.h"
+
+static ssize_t amd64_inject_section_show(struct device *dev,
+					 struct device_attribute *mattr,
+					 char *buf)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct amd64_pvt *pvt = mci->pvt_info;
+	return sprintf(buf, "0x%x\n", pvt->injection.section);
+}
+
+/*
+ * store error injection section value which refers to one of 4 16-byte sections
+ * within a 64-byte cacheline
+ *
+ * range: 0..3
+ */
+static ssize_t amd64_inject_section_store(struct device *dev,
+					  struct device_attribute *mattr,
+					  const char *data, size_t count)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int ret;
+
+	ret = kstrtoul(data, 10, &value);
+	if (ret < 0)
+		return ret;
+
+	if (value > 3) {
+		amd64_warn("%s: invalid section 0x%lx\n", __func__, value);
+		return -EINVAL;
+	}
+
+	pvt->injection.section = (u32) value;
+	return count;
+}
+
+static ssize_t amd64_inject_word_show(struct device *dev,
+					struct device_attribute *mattr,
+					char *buf)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct amd64_pvt *pvt = mci->pvt_info;
+	return sprintf(buf, "0x%x\n", pvt->injection.word);
+}
+
+/*
+ * store error injection word value which refers to one of 9 16-bit word of the
+ * 16-byte (128-bit + ECC bits) section
+ *
+ * range: 0..8
+ */
+static ssize_t amd64_inject_word_store(struct device *dev,
+				       struct device_attribute *mattr,
+				       const char *data, size_t count)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int ret;
+
+	ret = kstrtoul(data, 10, &value);
+	if (ret < 0)
+		return ret;
+
+	if (value > 8) {
+		amd64_warn("%s: invalid word 0x%lx\n", __func__, value);
+		return -EINVAL;
+	}
+
+	pvt->injection.word = (u32) value;
+	return count;
+}
+
+static ssize_t amd64_inject_ecc_vector_show(struct device *dev,
+					    struct device_attribute *mattr,
+					    char *buf)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct amd64_pvt *pvt = mci->pvt_info;
+	return sprintf(buf, "0x%x\n", pvt->injection.bit_map);
+}
+
+/*
+ * store 16 bit error injection vector which enables injecting errors to the
+ * corresponding bit within the error injection word above. When used during a
+ * DRAM ECC read, it holds the contents of the of the DRAM ECC bits.
+ */
+static ssize_t amd64_inject_ecc_vector_store(struct device *dev,
+				       struct device_attribute *mattr,
+				       const char *data, size_t count)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int ret;
+
+	ret = kstrtoul(data, 16, &value);
+	if (ret < 0)
+		return ret;
+
+	if (value & 0xFFFF0000) {
+		amd64_warn("%s: invalid EccVector: 0x%lx\n", __func__, value);
+		return -EINVAL;
+	}
+
+	pvt->injection.bit_map = (u32) value;
+	return count;
+}
+
+/*
+ * Do a DRAM ECC read. Assemble staged values in the pvt area, format into
+ * fields needed by the injection registers and read the NB Array Data Port.
+ */
+static ssize_t amd64_inject_read_store(struct device *dev,
+				       struct device_attribute *mattr,
+				       const char *data, size_t count)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	u32 section, word_bits;
+	int ret;
+
+	ret = kstrtoul(data, 10, &value);
+	if (ret < 0)
+		return ret;
+
+	/* Form value to choose 16-byte section of cacheline */
+	section = F10_NB_ARRAY_DRAM | SET_NB_ARRAY_ADDR(pvt->injection.section);
+
+	amd64_write_pci_cfg(pvt->F3, F10_NB_ARRAY_ADDR, section);
+
+	word_bits = SET_NB_DRAM_INJECTION_READ(pvt->injection);
+
+	/* Issue 'word' and 'bit' along with the READ request */
+	amd64_write_pci_cfg(pvt->F3, F10_NB_ARRAY_DATA, word_bits);
+
+	edac_dbg(0, "section=0x%x word_bits=0x%x\n", section, word_bits);
+
+	return count;
+}
+
+/*
+ * Do a DRAM ECC write. Assemble staged values in the pvt area and format into
+ * fields needed by the injection registers.
+ */
+static ssize_t amd64_inject_write_store(struct device *dev,
+					struct device_attribute *mattr,
+					const char *data, size_t count)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct amd64_pvt *pvt = mci->pvt_info;
+	u32 section, word_bits, tmp;
+	unsigned long value;
+	int ret;
+
+	ret = kstrtoul(data, 10, &value);
+	if (ret < 0)
+		return ret;
+
+	/* Form value to choose 16-byte section of cacheline */
+	section = F10_NB_ARRAY_DRAM | SET_NB_ARRAY_ADDR(pvt->injection.section);
+
+	amd64_write_pci_cfg(pvt->F3, F10_NB_ARRAY_ADDR, section);
+
+	word_bits = SET_NB_DRAM_INJECTION_WRITE(pvt->injection);
+
+	pr_notice_once("Don't forget to decrease MCE polling interval in\n"
+			"/sys/bus/machinecheck/devices/machinecheck<CPUNUM>/check_interval\n"
+			"so that you can get the error report faster.\n");
+
+	on_each_cpu(disable_caches, NULL, 1);
+
+	/* Issue 'word' and 'bit' along with the READ request */
+	amd64_write_pci_cfg(pvt->F3, F10_NB_ARRAY_DATA, word_bits);
+
+ retry:
+	/* wait until injection happens */
+	amd64_read_pci_cfg(pvt->F3, F10_NB_ARRAY_DATA, &tmp);
+	if (tmp & F10_NB_ARR_ECC_WR_REQ) {
+		cpu_relax();
+		goto retry;
+	}
+
+	on_each_cpu(enable_caches, NULL, 1);
+
+	edac_dbg(0, "section=0x%x word_bits=0x%x\n", section, word_bits);
+
+	return count;
+}
+
+/*
+ * update NUM_INJ_ATTRS in case you add new members
+ */
+
+static DEVICE_ATTR(inject_section, S_IRUGO | S_IWUSR,
+		   amd64_inject_section_show, amd64_inject_section_store);
+static DEVICE_ATTR(inject_word, S_IRUGO | S_IWUSR,
+		   amd64_inject_word_show, amd64_inject_word_store);
+static DEVICE_ATTR(inject_ecc_vector, S_IRUGO | S_IWUSR,
+		   amd64_inject_ecc_vector_show, amd64_inject_ecc_vector_store);
+static DEVICE_ATTR(inject_write, S_IWUSR,
+		   NULL, amd64_inject_write_store);
+static DEVICE_ATTR(inject_read,  S_IWUSR,
+		   NULL, amd64_inject_read_store);
+
+static struct attribute *amd64_edac_inj_attrs[] = {
+	&dev_attr_inject_section.attr,
+	&dev_attr_inject_word.attr,
+	&dev_attr_inject_ecc_vector.attr,
+	&dev_attr_inject_write.attr,
+	&dev_attr_inject_read.attr,
+	NULL
+};
+
+static umode_t amd64_edac_inj_is_visible(struct kobject *kobj,
+					 struct attribute *attr, int idx)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct mem_ctl_info *mci = container_of(dev, struct mem_ctl_info, dev);
+	struct amd64_pvt *pvt = mci->pvt_info;
+
+	if (pvt->fam < 0x10)
+		return 0;
+	return attr->mode;
+}
+
+const struct attribute_group amd64_edac_inj_group = {
+	.attrs = amd64_edac_inj_attrs,
+	.is_visible = amd64_edac_inj_is_visible,
+};
diff --git a/drivers/edac/amd76x_edac.c b/drivers/edac/amd76x_edac.c
new file mode 100644
index 000000000..9c6e326b4
--- /dev/null
+++ b/drivers/edac/amd76x_edac.c
@@ -0,0 +1,376 @@
+/*
+ * AMD 76x Memory Controller kernel module
+ * (C) 2003 Linux Networx (http://lnxi.com)
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Written by Thayne Harbaugh
+ * Based on work by Dan Hollis <goemon at anime dot net> and others.
+ *	http://www.anime.net/~goemon/linux-ecc/
+ *
+ * $Id: edac_amd76x.c,v 1.4.2.5 2005/10/05 00:43:44 dsp_llnl Exp $
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/edac.h>
+#include "edac_module.h"
+
+#define EDAC_MOD_STR	"amd76x_edac"
+
+#define amd76x_printk(level, fmt, arg...) \
+	edac_printk(level, "amd76x", fmt, ##arg)
+
+#define amd76x_mc_printk(mci, level, fmt, arg...) \
+	edac_mc_chipset_printk(mci, level, "amd76x", fmt, ##arg)
+
+#define AMD76X_NR_CSROWS 8
+#define AMD76X_NR_DIMMS  4
+
+/* AMD 76x register addresses - device 0 function 0 - PCI bridge */
+
+#define AMD76X_ECC_MODE_STATUS	0x48	/* Mode and status of ECC (32b)
+					 *
+					 * 31:16 reserved
+					 * 15:14 SERR enabled: x1=ue 1x=ce
+					 * 13    reserved
+					 * 12    diag: disabled, enabled
+					 * 11:10 mode: dis, EC, ECC, ECC+scrub
+					 *  9:8  status: x1=ue 1x=ce
+					 *  7:4  UE cs row
+					 *  3:0  CE cs row
+					 */
+
+#define AMD76X_DRAM_MODE_STATUS	0x58	/* DRAM Mode and status (32b)
+					 *
+					 * 31:26 clock disable 5 - 0
+					 * 25    SDRAM init
+					 * 24    reserved
+					 * 23    mode register service
+					 * 22:21 suspend to RAM
+					 * 20    burst refresh enable
+					 * 19    refresh disable
+					 * 18    reserved
+					 * 17:16 cycles-per-refresh
+					 * 15:8  reserved
+					 *  7:0  x4 mode enable 7 - 0
+					 */
+
+#define AMD76X_MEM_BASE_ADDR	0xC0	/* Memory base address (8 x 32b)
+					 *
+					 * 31:23 chip-select base
+					 * 22:16 reserved
+					 * 15:7  chip-select mask
+					 *  6:3  reserved
+					 *  2:1  address mode
+					 *  0    chip-select enable
+					 */
+
+struct amd76x_error_info {
+	u32 ecc_mode_status;
+};
+
+enum amd76x_chips {
+	AMD761 = 0,
+	AMD762
+};
+
+struct amd76x_dev_info {
+	const char *ctl_name;
+};
+
+static const struct amd76x_dev_info amd76x_devs[] = {
+	[AMD761] = {
+		.ctl_name = "AMD761"},
+	[AMD762] = {
+		.ctl_name = "AMD762"},
+};
+
+static struct edac_pci_ctl_info *amd76x_pci;
+
+/**
+ *	amd76x_get_error_info	-	fetch error information
+ *	@mci: Memory controller
+ *	@info: Info to fill in
+ *
+ *	Fetch and store the AMD76x ECC status. Clear pending status
+ *	on the chip so that further errors will be reported
+ */
+static void amd76x_get_error_info(struct mem_ctl_info *mci,
+				struct amd76x_error_info *info)
+{
+	struct pci_dev *pdev;
+
+	pdev = to_pci_dev(mci->pdev);
+	pci_read_config_dword(pdev, AMD76X_ECC_MODE_STATUS,
+			&info->ecc_mode_status);
+
+	if (info->ecc_mode_status & BIT(8))
+		pci_write_bits32(pdev, AMD76X_ECC_MODE_STATUS,
+				 (u32) BIT(8), (u32) BIT(8));
+
+	if (info->ecc_mode_status & BIT(9))
+		pci_write_bits32(pdev, AMD76X_ECC_MODE_STATUS,
+				 (u32) BIT(9), (u32) BIT(9));
+}
+
+/**
+ *	amd76x_process_error_info	-	Error check
+ *	@mci: Memory controller
+ *	@info: Previously fetched information from chip
+ *	@handle_errors: 1 if we should do recovery
+ *
+ *	Process the chip state and decide if an error has occurred.
+ *	A return of 1 indicates an error. Also if handle_errors is true
+ *	then attempt to handle and clean up after the error
+ */
+static int amd76x_process_error_info(struct mem_ctl_info *mci,
+				struct amd76x_error_info *info,
+				int handle_errors)
+{
+	int error_found;
+	u32 row;
+
+	error_found = 0;
+
+	/*
+	 *      Check for an uncorrectable error
+	 */
+	if (info->ecc_mode_status & BIT(8)) {
+		error_found = 1;
+
+		if (handle_errors) {
+			row = (info->ecc_mode_status >> 4) & 0xf;
+			edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+					     mci->csrows[row]->first_page, 0, 0,
+					     row, 0, -1,
+					     mci->ctl_name, "");
+		}
+	}
+
+	/*
+	 *      Check for a correctable error
+	 */
+	if (info->ecc_mode_status & BIT(9)) {
+		error_found = 1;
+
+		if (handle_errors) {
+			row = info->ecc_mode_status & 0xf;
+			edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+					     mci->csrows[row]->first_page, 0, 0,
+					     row, 0, -1,
+					     mci->ctl_name, "");
+		}
+	}
+
+	return error_found;
+}
+
+/**
+ *	amd76x_check	-	Poll the controller
+ *	@mci: Memory controller
+ *
+ *	Called by the poll handlers this function reads the status
+ *	from the controller and checks for errors.
+ */
+static void amd76x_check(struct mem_ctl_info *mci)
+{
+	struct amd76x_error_info info;
+	edac_dbg(3, "\n");
+	amd76x_get_error_info(mci, &info);
+	amd76x_process_error_info(mci, &info, 1);
+}
+
+static void amd76x_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
+			enum edac_type edac_mode)
+{
+	struct csrow_info *csrow;
+	struct dimm_info *dimm;
+	u32 mba, mba_base, mba_mask, dms;
+	int index;
+
+	for (index = 0; index < mci->nr_csrows; index++) {
+		csrow = mci->csrows[index];
+		dimm = csrow->channels[0]->dimm;
+
+		/* find the DRAM Chip Select Base address and mask */
+		pci_read_config_dword(pdev,
+				AMD76X_MEM_BASE_ADDR + (index * 4), &mba);
+
+		if (!(mba & BIT(0)))
+			continue;
+
+		mba_base = mba & 0xff800000UL;
+		mba_mask = ((mba & 0xff80) << 16) | 0x7fffffUL;
+		pci_read_config_dword(pdev, AMD76X_DRAM_MODE_STATUS, &dms);
+		csrow->first_page = mba_base >> PAGE_SHIFT;
+		dimm->nr_pages = (mba_mask + 1) >> PAGE_SHIFT;
+		csrow->last_page = csrow->first_page + dimm->nr_pages - 1;
+		csrow->page_mask = mba_mask >> PAGE_SHIFT;
+		dimm->grain = dimm->nr_pages << PAGE_SHIFT;
+		dimm->mtype = MEM_RDDR;
+		dimm->dtype = ((dms >> index) & 0x1) ? DEV_X4 : DEV_UNKNOWN;
+		dimm->edac_mode = edac_mode;
+	}
+}
+
+/**
+ *	amd76x_probe1	-	Perform set up for detected device
+ *	@pdev; PCI device detected
+ *	@dev_idx: Device type index
+ *
+ *	We have found an AMD76x and now need to set up the memory
+ *	controller status reporting. We configure and set up the
+ *	memory controller reporting and claim the device.
+ */
+static int amd76x_probe1(struct pci_dev *pdev, int dev_idx)
+{
+	static const enum edac_type ems_modes[] = {
+		EDAC_NONE,
+		EDAC_EC,
+		EDAC_SECDED,
+		EDAC_SECDED
+	};
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[2];
+	u32 ems;
+	u32 ems_mode;
+	struct amd76x_error_info discard;
+
+	edac_dbg(0, "\n");
+	pci_read_config_dword(pdev, AMD76X_ECC_MODE_STATUS, &ems);
+	ems_mode = (ems >> 10) & 0x3;
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = AMD76X_NR_CSROWS;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = 1;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0);
+
+	if (mci == NULL)
+		return -ENOMEM;
+
+	edac_dbg(0, "mci = %p\n", mci);
+	mci->pdev = &pdev->dev;
+	mci->mtype_cap = MEM_FLAG_RDDR;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
+	mci->edac_cap = ems_mode ?
+		(EDAC_FLAG_EC | EDAC_FLAG_SECDED) : EDAC_FLAG_NONE;
+	mci->mod_name = EDAC_MOD_STR;
+	mci->ctl_name = amd76x_devs[dev_idx].ctl_name;
+	mci->dev_name = pci_name(pdev);
+	mci->edac_check = amd76x_check;
+	mci->ctl_page_to_phys = NULL;
+
+	amd76x_init_csrows(mci, pdev, ems_modes[ems_mode]);
+	amd76x_get_error_info(mci, &discard);	/* clear counters */
+
+	/* Here we assume that we will never see multiple instances of this
+	 * type of memory controller.  The ID is therefore hardcoded to 0.
+	 */
+	if (edac_mc_add_mc(mci)) {
+		edac_dbg(3, "failed edac_mc_add_mc()\n");
+		goto fail;
+	}
+
+	/* allocating generic PCI control info */
+	amd76x_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
+	if (!amd76x_pci) {
+		printk(KERN_WARNING
+			"%s(): Unable to create PCI control\n",
+			__func__);
+		printk(KERN_WARNING
+			"%s(): PCI error report via EDAC not setup\n",
+			__func__);
+	}
+
+	/* get this far and it's successful */
+	edac_dbg(3, "success\n");
+	return 0;
+
+fail:
+	edac_mc_free(mci);
+	return -ENODEV;
+}
+
+/* returns count (>= 0), or negative on error */
+static int amd76x_init_one(struct pci_dev *pdev,
+			   const struct pci_device_id *ent)
+{
+	edac_dbg(0, "\n");
+
+	/* don't need to call pci_enable_device() */
+	return amd76x_probe1(pdev, ent->driver_data);
+}
+
+/**
+ *	amd76x_remove_one	-	driver shutdown
+ *	@pdev: PCI device being handed back
+ *
+ *	Called when the driver is unloaded. Find the matching mci
+ *	structure for the device then delete the mci and free the
+ *	resources.
+ */
+static void amd76x_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+
+	edac_dbg(0, "\n");
+
+	if (amd76x_pci)
+		edac_pci_release_generic_ctl(amd76x_pci);
+
+	if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
+		return;
+
+	edac_mc_free(mci);
+}
+
+static const struct pci_device_id amd76x_pci_tbl[] = {
+	{
+	 PCI_VEND_DEV(AMD, FE_GATE_700C), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	 AMD762},
+	{
+	 PCI_VEND_DEV(AMD, FE_GATE_700E), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	 AMD761},
+	{
+	 0,
+	 }			/* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, amd76x_pci_tbl);
+
+static struct pci_driver amd76x_driver = {
+	.name = EDAC_MOD_STR,
+	.probe = amd76x_init_one,
+	.remove = amd76x_remove_one,
+	.id_table = amd76x_pci_tbl,
+};
+
+static int __init amd76x_init(void)
+{
+       /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+       opstate_init();
+
+	return pci_register_driver(&amd76x_driver);
+}
+
+static void __exit amd76x_exit(void)
+{
+	pci_unregister_driver(&amd76x_driver);
+}
+
+module_init(amd76x_init);
+module_exit(amd76x_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh");
+MODULE_DESCRIPTION("MC support for AMD 76x memory controllers");
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/edac/amd8111_edac.c b/drivers/edac/amd8111_edac.c
new file mode 100644
index 000000000..b5786cfde
--- /dev/null
+++ b/drivers/edac/amd8111_edac.c
@@ -0,0 +1,609 @@
+/*
+ * amd8111_edac.c, AMD8111 Hyper Transport chip EDAC kernel module
+ *
+ * Copyright (c) 2008 Wind River Systems, Inc.
+ *
+ * Authors:	Cao Qingtao <qingtao.cao@windriver.com>
+ * 		Benjamin Walsh <benjamin.walsh@windriver.com>
+ * 		Hu Yongqi <yongqi.hu@windriver.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/edac.h>
+#include <linux/pci_ids.h>
+#include <asm/io.h>
+
+#include "edac_module.h"
+#include "amd8111_edac.h"
+
+#define AMD8111_EDAC_REVISION	" Ver: 1.0.0"
+#define AMD8111_EDAC_MOD_STR	"amd8111_edac"
+
+#define PCI_DEVICE_ID_AMD_8111_PCI	0x7460
+
+enum amd8111_edac_devs {
+	LPC_BRIDGE = 0,
+};
+
+enum amd8111_edac_pcis {
+	PCI_BRIDGE = 0,
+};
+
+/* Wrapper functions for accessing PCI configuration space */
+static int edac_pci_read_dword(struct pci_dev *dev, int reg, u32 *val32)
+{
+	int ret;
+
+	ret = pci_read_config_dword(dev, reg, val32);
+	if (ret != 0)
+		printk(KERN_ERR AMD8111_EDAC_MOD_STR
+			" PCI Access Read Error at 0x%x\n", reg);
+
+	return ret;
+}
+
+static void edac_pci_read_byte(struct pci_dev *dev, int reg, u8 *val8)
+{
+	int ret;
+
+	ret = pci_read_config_byte(dev, reg, val8);
+	if (ret != 0)
+		printk(KERN_ERR AMD8111_EDAC_MOD_STR
+			" PCI Access Read Error at 0x%x\n", reg);
+}
+
+static void edac_pci_write_dword(struct pci_dev *dev, int reg, u32 val32)
+{
+	int ret;
+
+	ret = pci_write_config_dword(dev, reg, val32);
+	if (ret != 0)
+		printk(KERN_ERR AMD8111_EDAC_MOD_STR
+			" PCI Access Write Error at 0x%x\n", reg);
+}
+
+static void edac_pci_write_byte(struct pci_dev *dev, int reg, u8 val8)
+{
+	int ret;
+
+	ret = pci_write_config_byte(dev, reg, val8);
+	if (ret != 0)
+		printk(KERN_ERR AMD8111_EDAC_MOD_STR
+			" PCI Access Write Error at 0x%x\n", reg);
+}
+
+/*
+ * device-specific methods for amd8111 PCI Bridge Controller
+ *
+ * Error Reporting and Handling for amd8111 chipset could be found
+ * in its datasheet 3.1.2 section, P37
+ */
+static void amd8111_pci_bridge_init(struct amd8111_pci_info *pci_info)
+{
+	u32 val32;
+	struct pci_dev *dev = pci_info->dev;
+
+	/* First clear error detection flags on the host interface */
+
+	/* Clear SSE/SMA/STA flags in the global status register*/
+	edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32);
+	if (val32 & PCI_STSCMD_CLEAR_MASK)
+		edac_pci_write_dword(dev, REG_PCI_STSCMD, val32);
+
+	/* Clear CRC and Link Fail flags in HT Link Control reg */
+	edac_pci_read_dword(dev, REG_HT_LINK, &val32);
+	if (val32 & HT_LINK_CLEAR_MASK)
+		edac_pci_write_dword(dev, REG_HT_LINK, val32);
+
+	/* Second clear all fault on the secondary interface */
+
+	/* Clear error flags in the memory-base limit reg. */
+	edac_pci_read_dword(dev, REG_MEM_LIM, &val32);
+	if (val32 & MEM_LIMIT_CLEAR_MASK)
+		edac_pci_write_dword(dev, REG_MEM_LIM, val32);
+
+	/* Clear Discard Timer Expired flag in Interrupt/Bridge Control reg */
+	edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32);
+	if (val32 & PCI_INTBRG_CTRL_CLEAR_MASK)
+		edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32);
+
+	/* Last enable error detections */
+	if (edac_op_state == EDAC_OPSTATE_POLL) {
+		/* Enable System Error reporting in global status register */
+		edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32);
+		val32 |= PCI_STSCMD_SERREN;
+		edac_pci_write_dword(dev, REG_PCI_STSCMD, val32);
+
+		/* Enable CRC Sync flood packets to HyperTransport Link */
+		edac_pci_read_dword(dev, REG_HT_LINK, &val32);
+		val32 |= HT_LINK_CRCFEN;
+		edac_pci_write_dword(dev, REG_HT_LINK, val32);
+
+		/* Enable SSE reporting etc in Interrupt control reg */
+		edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32);
+		val32 |= PCI_INTBRG_CTRL_POLL_MASK;
+		edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32);
+	}
+}
+
+static void amd8111_pci_bridge_exit(struct amd8111_pci_info *pci_info)
+{
+	u32 val32;
+	struct pci_dev *dev = pci_info->dev;
+
+	if (edac_op_state == EDAC_OPSTATE_POLL) {
+		/* Disable System Error reporting */
+		edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32);
+		val32 &= ~PCI_STSCMD_SERREN;
+		edac_pci_write_dword(dev, REG_PCI_STSCMD, val32);
+
+		/* Disable CRC flood packets */
+		edac_pci_read_dword(dev, REG_HT_LINK, &val32);
+		val32 &= ~HT_LINK_CRCFEN;
+		edac_pci_write_dword(dev, REG_HT_LINK, val32);
+
+		/* Disable DTSERREN/MARSP/SERREN in Interrupt Control reg */
+		edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32);
+		val32 &= ~PCI_INTBRG_CTRL_POLL_MASK;
+		edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32);
+	}
+}
+
+static void amd8111_pci_bridge_check(struct edac_pci_ctl_info *edac_dev)
+{
+	struct amd8111_pci_info *pci_info = edac_dev->pvt_info;
+	struct pci_dev *dev = pci_info->dev;
+	u32 val32;
+
+	/* Check out PCI Bridge Status and Command Register */
+	edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32);
+	if (val32 & PCI_STSCMD_CLEAR_MASK) {
+		printk(KERN_INFO "Error(s) in PCI bridge status and command"
+			"register on device %s\n", pci_info->ctl_name);
+		printk(KERN_INFO "SSE: %d, RMA: %d, RTA: %d\n",
+			(val32 & PCI_STSCMD_SSE) != 0,
+			(val32 & PCI_STSCMD_RMA) != 0,
+			(val32 & PCI_STSCMD_RTA) != 0);
+
+		val32 |= PCI_STSCMD_CLEAR_MASK;
+		edac_pci_write_dword(dev, REG_PCI_STSCMD, val32);
+
+		edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
+	}
+
+	/* Check out HyperTransport Link Control Register */
+	edac_pci_read_dword(dev, REG_HT_LINK, &val32);
+	if (val32 & HT_LINK_LKFAIL) {
+		printk(KERN_INFO "Error(s) in hypertransport link control"
+			"register on device %s\n", pci_info->ctl_name);
+		printk(KERN_INFO "LKFAIL: %d\n",
+			(val32 & HT_LINK_LKFAIL) != 0);
+
+		val32 |= HT_LINK_LKFAIL;
+		edac_pci_write_dword(dev, REG_HT_LINK, val32);
+
+		edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
+	}
+
+	/* Check out PCI Interrupt and Bridge Control Register */
+	edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32);
+	if (val32 & PCI_INTBRG_CTRL_DTSTAT) {
+		printk(KERN_INFO "Error(s) in PCI interrupt and bridge control"
+			"register on device %s\n", pci_info->ctl_name);
+		printk(KERN_INFO "DTSTAT: %d\n",
+			(val32 & PCI_INTBRG_CTRL_DTSTAT) != 0);
+
+		val32 |= PCI_INTBRG_CTRL_DTSTAT;
+		edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32);
+
+		edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
+	}
+
+	/* Check out PCI Bridge Memory Base-Limit Register */
+	edac_pci_read_dword(dev, REG_MEM_LIM, &val32);
+	if (val32 & MEM_LIMIT_CLEAR_MASK) {
+		printk(KERN_INFO
+			"Error(s) in mem limit register on %s device\n",
+			pci_info->ctl_name);
+		printk(KERN_INFO "DPE: %d, RSE: %d, RMA: %d\n"
+			"RTA: %d, STA: %d, MDPE: %d\n",
+			(val32 & MEM_LIMIT_DPE)  != 0,
+			(val32 & MEM_LIMIT_RSE)  != 0,
+			(val32 & MEM_LIMIT_RMA)  != 0,
+			(val32 & MEM_LIMIT_RTA)  != 0,
+			(val32 & MEM_LIMIT_STA)  != 0,
+			(val32 & MEM_LIMIT_MDPE) != 0);
+
+		val32 |= MEM_LIMIT_CLEAR_MASK;
+		edac_pci_write_dword(dev, REG_MEM_LIM, val32);
+
+		edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
+	}
+}
+
+static struct resource *legacy_io_res;
+static int at_compat_reg_broken;
+#define LEGACY_NR_PORTS	1
+
+/* device-specific methods for amd8111 LPC Bridge device */
+static void amd8111_lpc_bridge_init(struct amd8111_dev_info *dev_info)
+{
+	u8 val8;
+	struct pci_dev *dev = dev_info->dev;
+
+	/* First clear REG_AT_COMPAT[SERR, IOCHK] if necessary */
+	legacy_io_res = request_region(REG_AT_COMPAT, LEGACY_NR_PORTS,
+					AMD8111_EDAC_MOD_STR);
+	if (!legacy_io_res)
+		printk(KERN_INFO "%s: failed to request legacy I/O region "
+			"start %d, len %d\n", __func__,
+			REG_AT_COMPAT, LEGACY_NR_PORTS);
+	else {
+		val8 = __do_inb(REG_AT_COMPAT);
+		if (val8 == 0xff) { /* buggy port */
+			printk(KERN_INFO "%s: port %d is buggy, not supported"
+				" by hardware?\n", __func__, REG_AT_COMPAT);
+			at_compat_reg_broken = 1;
+			release_region(REG_AT_COMPAT, LEGACY_NR_PORTS);
+			legacy_io_res = NULL;
+		} else {
+			u8 out8 = 0;
+			if (val8 & AT_COMPAT_SERR)
+				out8 = AT_COMPAT_CLRSERR;
+			if (val8 & AT_COMPAT_IOCHK)
+				out8 |= AT_COMPAT_CLRIOCHK;
+			if (out8 > 0)
+				__do_outb(out8, REG_AT_COMPAT);
+		}
+	}
+
+	/* Second clear error flags on LPC bridge */
+	edac_pci_read_byte(dev, REG_IO_CTRL_1, &val8);
+	if (val8 & IO_CTRL_1_CLEAR_MASK)
+		edac_pci_write_byte(dev, REG_IO_CTRL_1, val8);
+}
+
+static void amd8111_lpc_bridge_exit(struct amd8111_dev_info *dev_info)
+{
+	if (legacy_io_res)
+		release_region(REG_AT_COMPAT, LEGACY_NR_PORTS);
+}
+
+static void amd8111_lpc_bridge_check(struct edac_device_ctl_info *edac_dev)
+{
+	struct amd8111_dev_info *dev_info = edac_dev->pvt_info;
+	struct pci_dev *dev = dev_info->dev;
+	u8 val8;
+
+	edac_pci_read_byte(dev, REG_IO_CTRL_1, &val8);
+	if (val8 & IO_CTRL_1_CLEAR_MASK) {
+		printk(KERN_INFO
+			"Error(s) in IO control register on %s device\n",
+			dev_info->ctl_name);
+		printk(KERN_INFO "LPC ERR: %d, PW2LPC: %d\n",
+			(val8 & IO_CTRL_1_LPC_ERR) != 0,
+			(val8 & IO_CTRL_1_PW2LPC) != 0);
+
+		val8 |= IO_CTRL_1_CLEAR_MASK;
+		edac_pci_write_byte(dev, REG_IO_CTRL_1, val8);
+
+		edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name);
+	}
+
+	if (at_compat_reg_broken == 0) {
+		u8 out8 = 0;
+		val8 = __do_inb(REG_AT_COMPAT);
+		if (val8 & AT_COMPAT_SERR)
+			out8 = AT_COMPAT_CLRSERR;
+		if (val8 & AT_COMPAT_IOCHK)
+			out8 |= AT_COMPAT_CLRIOCHK;
+		if (out8 > 0) {
+			__do_outb(out8, REG_AT_COMPAT);
+			edac_device_handle_ue(edac_dev, 0, 0,
+						edac_dev->ctl_name);
+		}
+	}
+}
+
+/* General devices represented by edac_device_ctl_info */
+static struct amd8111_dev_info amd8111_devices[] = {
+	[LPC_BRIDGE] = {
+		.err_dev = PCI_DEVICE_ID_AMD_8111_LPC,
+		.ctl_name = "lpc",
+		.init = amd8111_lpc_bridge_init,
+		.exit = amd8111_lpc_bridge_exit,
+		.check = amd8111_lpc_bridge_check,
+	},
+	{0},
+};
+
+/* PCI controllers represented by edac_pci_ctl_info */
+static struct amd8111_pci_info amd8111_pcis[] = {
+	[PCI_BRIDGE] = {
+		.err_dev = PCI_DEVICE_ID_AMD_8111_PCI,
+		.ctl_name = "AMD8111_PCI_Controller",
+		.init = amd8111_pci_bridge_init,
+		.exit = amd8111_pci_bridge_exit,
+		.check = amd8111_pci_bridge_check,
+	},
+	{0},
+};
+
+static int amd8111_dev_probe(struct pci_dev *dev,
+				const struct pci_device_id *id)
+{
+	struct amd8111_dev_info *dev_info = &amd8111_devices[id->driver_data];
+	int ret = -ENODEV;
+
+	dev_info->dev = pci_get_device(PCI_VENDOR_ID_AMD,
+					dev_info->err_dev, NULL);
+
+	if (!dev_info->dev) {
+		printk(KERN_ERR "EDAC device not found:"
+			"vendor %x, device %x, name %s\n",
+			PCI_VENDOR_ID_AMD, dev_info->err_dev,
+			dev_info->ctl_name);
+		goto err;
+	}
+
+	if (pci_enable_device(dev_info->dev)) {
+		printk(KERN_ERR "failed to enable:"
+			"vendor %x, device %x, name %s\n",
+			PCI_VENDOR_ID_AMD, dev_info->err_dev,
+			dev_info->ctl_name);
+		goto err_dev_put;
+	}
+
+	/*
+	 * we do not allocate extra private structure for
+	 * edac_device_ctl_info, but make use of existing
+	 * one instead.
+	*/
+	dev_info->edac_idx = edac_device_alloc_index();
+	dev_info->edac_dev =
+		edac_device_alloc_ctl_info(0, dev_info->ctl_name, 1,
+					   NULL, 0, 0,
+					   NULL, 0, dev_info->edac_idx);
+	if (!dev_info->edac_dev) {
+		ret = -ENOMEM;
+		goto err_dev_put;
+	}
+
+	dev_info->edac_dev->pvt_info = dev_info;
+	dev_info->edac_dev->dev = &dev_info->dev->dev;
+	dev_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR;
+	dev_info->edac_dev->ctl_name = dev_info->ctl_name;
+	dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev);
+
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		dev_info->edac_dev->edac_check = dev_info->check;
+
+	if (dev_info->init)
+		dev_info->init(dev_info);
+
+	if (edac_device_add_device(dev_info->edac_dev) > 0) {
+		printk(KERN_ERR "failed to add edac_dev for %s\n",
+			dev_info->ctl_name);
+		goto err_edac_free_ctl;
+	}
+
+	printk(KERN_INFO "added one edac_dev on AMD8111 "
+		"vendor %x, device %x, name %s\n",
+		PCI_VENDOR_ID_AMD, dev_info->err_dev,
+		dev_info->ctl_name);
+
+	return 0;
+
+err_edac_free_ctl:
+	edac_device_free_ctl_info(dev_info->edac_dev);
+err_dev_put:
+	pci_dev_put(dev_info->dev);
+err:
+	return ret;
+}
+
+static void amd8111_dev_remove(struct pci_dev *dev)
+{
+	struct amd8111_dev_info *dev_info;
+
+	for (dev_info = amd8111_devices; dev_info->err_dev; dev_info++)
+		if (dev_info->dev->device == dev->device)
+			break;
+
+	if (!dev_info->err_dev)	/* should never happen */
+		return;
+
+	if (dev_info->edac_dev) {
+		edac_device_del_device(dev_info->edac_dev->dev);
+		edac_device_free_ctl_info(dev_info->edac_dev);
+	}
+
+	if (dev_info->exit)
+		dev_info->exit(dev_info);
+
+	pci_dev_put(dev_info->dev);
+}
+
+static int amd8111_pci_probe(struct pci_dev *dev,
+				const struct pci_device_id *id)
+{
+	struct amd8111_pci_info *pci_info = &amd8111_pcis[id->driver_data];
+	int ret = -ENODEV;
+
+	pci_info->dev = pci_get_device(PCI_VENDOR_ID_AMD,
+					pci_info->err_dev, NULL);
+
+	if (!pci_info->dev) {
+		printk(KERN_ERR "EDAC device not found:"
+			"vendor %x, device %x, name %s\n",
+			PCI_VENDOR_ID_AMD, pci_info->err_dev,
+			pci_info->ctl_name);
+		goto err;
+	}
+
+	if (pci_enable_device(pci_info->dev)) {
+		printk(KERN_ERR "failed to enable:"
+			"vendor %x, device %x, name %s\n",
+			PCI_VENDOR_ID_AMD, pci_info->err_dev,
+			pci_info->ctl_name);
+		goto err_dev_put;
+	}
+
+	/*
+	 * we do not allocate extra private structure for
+	 * edac_pci_ctl_info, but make use of existing
+	 * one instead.
+	*/
+	pci_info->edac_idx = edac_pci_alloc_index();
+	pci_info->edac_dev = edac_pci_alloc_ctl_info(0, pci_info->ctl_name);
+	if (!pci_info->edac_dev) {
+		ret = -ENOMEM;
+		goto err_dev_put;
+	}
+
+	pci_info->edac_dev->pvt_info = pci_info;
+	pci_info->edac_dev->dev = &pci_info->dev->dev;
+	pci_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR;
+	pci_info->edac_dev->ctl_name = pci_info->ctl_name;
+	pci_info->edac_dev->dev_name = dev_name(&pci_info->dev->dev);
+
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		pci_info->edac_dev->edac_check = pci_info->check;
+
+	if (pci_info->init)
+		pci_info->init(pci_info);
+
+	if (edac_pci_add_device(pci_info->edac_dev, pci_info->edac_idx) > 0) {
+		printk(KERN_ERR "failed to add edac_pci for %s\n",
+			pci_info->ctl_name);
+		goto err_edac_free_ctl;
+	}
+
+	printk(KERN_INFO "added one edac_pci on AMD8111 "
+		"vendor %x, device %x, name %s\n",
+		PCI_VENDOR_ID_AMD, pci_info->err_dev,
+		pci_info->ctl_name);
+
+	return 0;
+
+err_edac_free_ctl:
+	edac_pci_free_ctl_info(pci_info->edac_dev);
+err_dev_put:
+	pci_dev_put(pci_info->dev);
+err:
+	return ret;
+}
+
+static void amd8111_pci_remove(struct pci_dev *dev)
+{
+	struct amd8111_pci_info *pci_info;
+
+	for (pci_info = amd8111_pcis; pci_info->err_dev; pci_info++)
+		if (pci_info->dev->device == dev->device)
+			break;
+
+	if (!pci_info->err_dev)	/* should never happen */
+		return;
+
+	if (pci_info->edac_dev) {
+		edac_pci_del_device(pci_info->edac_dev->dev);
+		edac_pci_free_ctl_info(pci_info->edac_dev);
+	}
+
+	if (pci_info->exit)
+		pci_info->exit(pci_info);
+
+	pci_dev_put(pci_info->dev);
+}
+
+/* PCI Device ID talbe for general EDAC device */
+static const struct pci_device_id amd8111_edac_dev_tbl[] = {
+	{
+	PCI_VEND_DEV(AMD, 8111_LPC),
+	.subvendor = PCI_ANY_ID,
+	.subdevice = PCI_ANY_ID,
+	.class = 0,
+	.class_mask = 0,
+	.driver_data = LPC_BRIDGE,
+	},
+	{
+	0,
+	}			/* table is NULL-terminated */
+};
+MODULE_DEVICE_TABLE(pci, amd8111_edac_dev_tbl);
+
+static struct pci_driver amd8111_edac_dev_driver = {
+	.name = "AMD8111_EDAC_DEV",
+	.probe = amd8111_dev_probe,
+	.remove = amd8111_dev_remove,
+	.id_table = amd8111_edac_dev_tbl,
+};
+
+/* PCI Device ID table for EDAC PCI controller */
+static const struct pci_device_id amd8111_edac_pci_tbl[] = {
+	{
+	PCI_VEND_DEV(AMD, 8111_PCI),
+	.subvendor = PCI_ANY_ID,
+	.subdevice = PCI_ANY_ID,
+	.class = 0,
+	.class_mask = 0,
+	.driver_data = PCI_BRIDGE,
+	},
+	{
+	0,
+	}			/* table is NULL-terminated */
+};
+MODULE_DEVICE_TABLE(pci, amd8111_edac_pci_tbl);
+
+static struct pci_driver amd8111_edac_pci_driver = {
+	.name = "AMD8111_EDAC_PCI",
+	.probe = amd8111_pci_probe,
+	.remove = amd8111_pci_remove,
+	.id_table = amd8111_edac_pci_tbl,
+};
+
+static int __init amd8111_edac_init(void)
+{
+	int val;
+
+	printk(KERN_INFO "AMD8111 EDAC driver "	AMD8111_EDAC_REVISION "\n");
+	printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc.\n");
+
+	/* Only POLL mode supported so far */
+	edac_op_state = EDAC_OPSTATE_POLL;
+
+	val = pci_register_driver(&amd8111_edac_dev_driver);
+	val |= pci_register_driver(&amd8111_edac_pci_driver);
+
+	return val;
+}
+
+static void __exit amd8111_edac_exit(void)
+{
+	pci_unregister_driver(&amd8111_edac_pci_driver);
+	pci_unregister_driver(&amd8111_edac_dev_driver);
+}
+
+
+module_init(amd8111_edac_init);
+module_exit(amd8111_edac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cao Qingtao <qingtao.cao@windriver.com>\n");
+MODULE_DESCRIPTION("AMD8111 HyperTransport I/O Hub EDAC kernel module");
diff --git a/drivers/edac/amd8111_edac.h b/drivers/edac/amd8111_edac.h
new file mode 100644
index 000000000..35794331d
--- /dev/null
+++ b/drivers/edac/amd8111_edac.h
@@ -0,0 +1,130 @@
+/*
+ * amd8111_edac.h, EDAC defs for AMD8111 hypertransport chip
+ *
+ * Copyright (c) 2008 Wind River Systems, Inc.
+ *
+ * Authors:	Cao Qingtao <qingtao.cao@windriver.com>
+ * 		Benjamin Walsh <benjamin.walsh@windriver.com>
+ * 		Hu Yongqi <yongqi.hu@windriver.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _AMD8111_EDAC_H_
+#define _AMD8111_EDAC_H_
+
+/************************************************************
+ *	PCI Bridge Status and Command Register, DevA:0x04
+ ************************************************************/
+#define REG_PCI_STSCMD	0x04
+enum pci_stscmd_bits {
+	PCI_STSCMD_SSE		= BIT(30),
+	PCI_STSCMD_RMA		= BIT(29),
+	PCI_STSCMD_RTA		= BIT(28),
+	PCI_STSCMD_SERREN	= BIT(8),
+	PCI_STSCMD_CLEAR_MASK	= (PCI_STSCMD_SSE |
+				   PCI_STSCMD_RMA |
+				   PCI_STSCMD_RTA)
+};
+
+/************************************************************
+ *	PCI Bridge Memory Base-Limit Register, DevA:0x1c
+ ************************************************************/
+#define REG_MEM_LIM     0x1c
+enum mem_limit_bits {
+	MEM_LIMIT_DPE   = BIT(31),
+	MEM_LIMIT_RSE   = BIT(30),
+	MEM_LIMIT_RMA   = BIT(29),
+	MEM_LIMIT_RTA   = BIT(28),
+	MEM_LIMIT_STA   = BIT(27),
+	MEM_LIMIT_MDPE  = BIT(24),
+	MEM_LIMIT_CLEAR_MASK  = (MEM_LIMIT_DPE |
+				 MEM_LIMIT_RSE |
+				 MEM_LIMIT_RMA |
+				 MEM_LIMIT_RTA |
+				 MEM_LIMIT_STA |
+				 MEM_LIMIT_MDPE)
+};
+
+/************************************************************
+ *	HyperTransport Link Control Register, DevA:0xc4
+ ************************************************************/
+#define REG_HT_LINK	0xc4
+enum ht_link_bits {
+	HT_LINK_LKFAIL	= BIT(4),
+	HT_LINK_CRCFEN	= BIT(1),
+	HT_LINK_CLEAR_MASK = (HT_LINK_LKFAIL)
+};
+
+/************************************************************
+ *	PCI Bridge Interrupt and Bridge Control, DevA:0x3c
+ ************************************************************/
+#define REG_PCI_INTBRG_CTRL	0x3c
+enum pci_intbrg_ctrl_bits {
+	PCI_INTBRG_CTRL_DTSERREN	= BIT(27),
+	PCI_INTBRG_CTRL_DTSTAT		= BIT(26),
+	PCI_INTBRG_CTRL_MARSP		= BIT(21),
+	PCI_INTBRG_CTRL_SERREN		= BIT(17),
+	PCI_INTBRG_CTRL_PEREN		= BIT(16),
+	PCI_INTBRG_CTRL_CLEAR_MASK	= (PCI_INTBRG_CTRL_DTSTAT),
+	PCI_INTBRG_CTRL_POLL_MASK	= (PCI_INTBRG_CTRL_DTSERREN |
+					   PCI_INTBRG_CTRL_MARSP |
+					   PCI_INTBRG_CTRL_SERREN)
+};
+
+/************************************************************
+ *		I/O Control 1 Register, DevB:0x40
+ ************************************************************/
+#define REG_IO_CTRL_1 0x40
+enum io_ctrl_1_bits {
+	IO_CTRL_1_NMIONERR	= BIT(7),
+	IO_CTRL_1_LPC_ERR	= BIT(6),
+	IO_CTRL_1_PW2LPC	= BIT(1),
+	IO_CTRL_1_CLEAR_MASK	= (IO_CTRL_1_LPC_ERR | IO_CTRL_1_PW2LPC)
+};
+
+/************************************************************
+ *		Legacy I/O Space Registers
+ ************************************************************/
+#define REG_AT_COMPAT 0x61
+enum at_compat_bits {
+	AT_COMPAT_SERR		= BIT(7),
+	AT_COMPAT_IOCHK		= BIT(6),
+	AT_COMPAT_CLRIOCHK	= BIT(3),
+	AT_COMPAT_CLRSERR	= BIT(2),
+};
+
+struct amd8111_dev_info {
+	u16 err_dev;	/* PCI Device ID */
+	struct pci_dev *dev;
+	int edac_idx;	/* device index */
+	char *ctl_name;
+	struct edac_device_ctl_info *edac_dev;
+	void (*init)(struct amd8111_dev_info *dev_info);
+	void (*exit)(struct amd8111_dev_info *dev_info);
+	void (*check)(struct edac_device_ctl_info *edac_dev);
+};
+
+struct amd8111_pci_info {
+	u16 err_dev;	/* PCI Device ID */
+	struct pci_dev *dev;
+	int edac_idx;	/* pci index */
+	const char *ctl_name;
+	struct edac_pci_ctl_info *edac_dev;
+	void (*init)(struct amd8111_pci_info *dev_info);
+	void (*exit)(struct amd8111_pci_info *dev_info);
+	void (*check)(struct edac_pci_ctl_info *edac_dev);
+};
+
+#endif /* _AMD8111_EDAC_H_ */
diff --git a/drivers/edac/amd8131_edac.c b/drivers/edac/amd8131_edac.c
new file mode 100644
index 000000000..8851c33d7
--- /dev/null
+++ b/drivers/edac/amd8131_edac.c
@@ -0,0 +1,378 @@
+/*
+ * amd8131_edac.c, AMD8131 hypertransport chip EDAC kernel module
+ *
+ * Copyright (c) 2008 Wind River Systems, Inc.
+ *
+ * Authors:	Cao Qingtao <qingtao.cao@windriver.com>
+ * 		Benjamin Walsh <benjamin.walsh@windriver.com>
+ * 		Hu Yongqi <yongqi.hu@windriver.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/edac.h>
+#include <linux/pci_ids.h>
+
+#include "edac_module.h"
+#include "amd8131_edac.h"
+
+#define AMD8131_EDAC_REVISION	" Ver: 1.0.0"
+#define AMD8131_EDAC_MOD_STR	"amd8131_edac"
+
+/* Wrapper functions for accessing PCI configuration space */
+static void edac_pci_read_dword(struct pci_dev *dev, int reg, u32 *val32)
+{
+	int ret;
+
+	ret = pci_read_config_dword(dev, reg, val32);
+	if (ret != 0)
+		printk(KERN_ERR AMD8131_EDAC_MOD_STR
+			" PCI Access Read Error at 0x%x\n", reg);
+}
+
+static void edac_pci_write_dword(struct pci_dev *dev, int reg, u32 val32)
+{
+	int ret;
+
+	ret = pci_write_config_dword(dev, reg, val32);
+	if (ret != 0)
+		printk(KERN_ERR AMD8131_EDAC_MOD_STR
+			" PCI Access Write Error at 0x%x\n", reg);
+}
+
+static char * const bridge_str[] = {
+	[NORTH_A] = "NORTH A",
+	[NORTH_B] = "NORTH B",
+	[SOUTH_A] = "SOUTH A",
+	[SOUTH_B] = "SOUTH B",
+	[NO_BRIDGE] = "NO BRIDGE",
+};
+
+/* Support up to two AMD8131 chipsets on a platform */
+static struct amd8131_dev_info amd8131_devices[] = {
+	{
+	.inst = NORTH_A,
+	.devfn = DEVFN_PCIX_BRIDGE_NORTH_A,
+	.ctl_name = "AMD8131_PCIX_NORTH_A",
+	},
+	{
+	.inst = NORTH_B,
+	.devfn = DEVFN_PCIX_BRIDGE_NORTH_B,
+	.ctl_name = "AMD8131_PCIX_NORTH_B",
+	},
+	{
+	.inst = SOUTH_A,
+	.devfn = DEVFN_PCIX_BRIDGE_SOUTH_A,
+	.ctl_name = "AMD8131_PCIX_SOUTH_A",
+	},
+	{
+	.inst = SOUTH_B,
+	.devfn = DEVFN_PCIX_BRIDGE_SOUTH_B,
+	.ctl_name = "AMD8131_PCIX_SOUTH_B",
+	},
+	{.inst = NO_BRIDGE,},
+};
+
+static void amd8131_pcix_init(struct amd8131_dev_info *dev_info)
+{
+	u32 val32;
+	struct pci_dev *dev = dev_info->dev;
+
+	/* First clear error detection flags */
+	edac_pci_read_dword(dev, REG_MEM_LIM, &val32);
+	if (val32 & MEM_LIMIT_MASK)
+		edac_pci_write_dword(dev, REG_MEM_LIM, val32);
+
+	/* Clear Discard Timer Timedout flag */
+	edac_pci_read_dword(dev, REG_INT_CTLR, &val32);
+	if (val32 & INT_CTLR_DTS)
+		edac_pci_write_dword(dev, REG_INT_CTLR, val32);
+
+	/* Clear CRC Error flag on link side A */
+	edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32);
+	if (val32 & LNK_CTRL_CRCERR_A)
+		edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32);
+
+	/* Clear CRC Error flag on link side B */
+	edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32);
+	if (val32 & LNK_CTRL_CRCERR_B)
+		edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32);
+
+	/*
+	 * Then enable all error detections.
+	 *
+	 * Setup Discard Timer Sync Flood Enable,
+	 * System Error Enable and Parity Error Enable.
+	 */
+	edac_pci_read_dword(dev, REG_INT_CTLR, &val32);
+	val32 |= INT_CTLR_PERR | INT_CTLR_SERR | INT_CTLR_DTSE;
+	edac_pci_write_dword(dev, REG_INT_CTLR, val32);
+
+	/* Enable overall SERR Error detection */
+	edac_pci_read_dword(dev, REG_STS_CMD, &val32);
+	val32 |= STS_CMD_SERREN;
+	edac_pci_write_dword(dev, REG_STS_CMD, val32);
+
+	/* Setup CRC Flood Enable for link side A */
+	edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32);
+	val32 |= LNK_CTRL_CRCFEN;
+	edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32);
+
+	/* Setup CRC Flood Enable for link side B */
+	edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32);
+	val32 |= LNK_CTRL_CRCFEN;
+	edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32);
+}
+
+static void amd8131_pcix_exit(struct amd8131_dev_info *dev_info)
+{
+	u32 val32;
+	struct pci_dev *dev = dev_info->dev;
+
+	/* Disable SERR, PERR and DTSE Error detection */
+	edac_pci_read_dword(dev, REG_INT_CTLR, &val32);
+	val32 &= ~(INT_CTLR_PERR | INT_CTLR_SERR | INT_CTLR_DTSE);
+	edac_pci_write_dword(dev, REG_INT_CTLR, val32);
+
+	/* Disable overall System Error detection */
+	edac_pci_read_dword(dev, REG_STS_CMD, &val32);
+	val32 &= ~STS_CMD_SERREN;
+	edac_pci_write_dword(dev, REG_STS_CMD, val32);
+
+	/* Disable CRC Sync Flood on link side A */
+	edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32);
+	val32 &= ~LNK_CTRL_CRCFEN;
+	edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32);
+
+	/* Disable CRC Sync Flood on link side B */
+	edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32);
+	val32 &= ~LNK_CTRL_CRCFEN;
+	edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32);
+}
+
+static void amd8131_pcix_check(struct edac_pci_ctl_info *edac_dev)
+{
+	struct amd8131_dev_info *dev_info = edac_dev->pvt_info;
+	struct pci_dev *dev = dev_info->dev;
+	u32 val32;
+
+	/* Check PCI-X Bridge Memory Base-Limit Register for errors */
+	edac_pci_read_dword(dev, REG_MEM_LIM, &val32);
+	if (val32 & MEM_LIMIT_MASK) {
+		printk(KERN_INFO "Error(s) in mem limit register "
+			"on %s bridge\n", dev_info->ctl_name);
+		printk(KERN_INFO "DPE: %d, RSE: %d, RMA: %d\n"
+			"RTA: %d, STA: %d, MDPE: %d\n",
+			val32 & MEM_LIMIT_DPE,
+			val32 & MEM_LIMIT_RSE,
+			val32 & MEM_LIMIT_RMA,
+			val32 & MEM_LIMIT_RTA,
+			val32 & MEM_LIMIT_STA,
+			val32 & MEM_LIMIT_MDPE);
+
+		val32 |= MEM_LIMIT_MASK;
+		edac_pci_write_dword(dev, REG_MEM_LIM, val32);
+
+		edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
+	}
+
+	/* Check if Discard Timer timed out */
+	edac_pci_read_dword(dev, REG_INT_CTLR, &val32);
+	if (val32 & INT_CTLR_DTS) {
+		printk(KERN_INFO "Error(s) in interrupt and control register "
+			"on %s bridge\n", dev_info->ctl_name);
+		printk(KERN_INFO "DTS: %d\n", val32 & INT_CTLR_DTS);
+
+		val32 |= INT_CTLR_DTS;
+		edac_pci_write_dword(dev, REG_INT_CTLR, val32);
+
+		edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
+	}
+
+	/* Check if CRC error happens on link side A */
+	edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32);
+	if (val32 & LNK_CTRL_CRCERR_A) {
+		printk(KERN_INFO "Error(s) in link conf and control register "
+			"on %s bridge\n", dev_info->ctl_name);
+		printk(KERN_INFO "CRCERR: %d\n", val32 & LNK_CTRL_CRCERR_A);
+
+		val32 |= LNK_CTRL_CRCERR_A;
+		edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32);
+
+		edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
+	}
+
+	/* Check if CRC error happens on link side B */
+	edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32);
+	if (val32 & LNK_CTRL_CRCERR_B) {
+		printk(KERN_INFO "Error(s) in link conf and control register "
+			"on %s bridge\n", dev_info->ctl_name);
+		printk(KERN_INFO "CRCERR: %d\n", val32 & LNK_CTRL_CRCERR_B);
+
+		val32 |= LNK_CTRL_CRCERR_B;
+		edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32);
+
+		edac_pci_handle_npe(edac_dev, edac_dev->ctl_name);
+	}
+}
+
+static struct amd8131_info amd8131_chipset = {
+	.err_dev = PCI_DEVICE_ID_AMD_8131_APIC,
+	.devices = amd8131_devices,
+	.init = amd8131_pcix_init,
+	.exit = amd8131_pcix_exit,
+	.check = amd8131_pcix_check,
+};
+
+/*
+ * There are 4 PCIX Bridges on ATCA-6101 that share the same PCI Device ID,
+ * so amd8131_probe() would be called by kernel 4 times, with different
+ * address of pci_dev for each of them each time.
+ */
+static int amd8131_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	struct amd8131_dev_info *dev_info;
+
+	for (dev_info = amd8131_chipset.devices; dev_info->inst != NO_BRIDGE;
+		dev_info++)
+		if (dev_info->devfn == dev->devfn)
+			break;
+
+	if (dev_info->inst == NO_BRIDGE) /* should never happen */
+		return -ENODEV;
+
+	/*
+	 * We can't call pci_get_device() as we are used to do because
+	 * there are 4 of them but pci_dev_get() instead.
+	 */
+	dev_info->dev = pci_dev_get(dev);
+
+	if (pci_enable_device(dev_info->dev)) {
+		pci_dev_put(dev_info->dev);
+		printk(KERN_ERR "failed to enable:"
+			"vendor %x, device %x, devfn %x, name %s\n",
+			PCI_VENDOR_ID_AMD, amd8131_chipset.err_dev,
+			dev_info->devfn, dev_info->ctl_name);
+		return -ENODEV;
+	}
+
+	/*
+	 * we do not allocate extra private structure for
+	 * edac_pci_ctl_info, but make use of existing
+	 * one instead.
+	 */
+	dev_info->edac_idx = edac_pci_alloc_index();
+	dev_info->edac_dev = edac_pci_alloc_ctl_info(0, dev_info->ctl_name);
+	if (!dev_info->edac_dev)
+		return -ENOMEM;
+
+	dev_info->edac_dev->pvt_info = dev_info;
+	dev_info->edac_dev->dev = &dev_info->dev->dev;
+	dev_info->edac_dev->mod_name = AMD8131_EDAC_MOD_STR;
+	dev_info->edac_dev->ctl_name = dev_info->ctl_name;
+	dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev);
+
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		dev_info->edac_dev->edac_check = amd8131_chipset.check;
+
+	if (amd8131_chipset.init)
+		amd8131_chipset.init(dev_info);
+
+	if (edac_pci_add_device(dev_info->edac_dev, dev_info->edac_idx) > 0) {
+		printk(KERN_ERR "failed edac_pci_add_device() for %s\n",
+			dev_info->ctl_name);
+		edac_pci_free_ctl_info(dev_info->edac_dev);
+		return -ENODEV;
+	}
+
+	printk(KERN_INFO "added one device on AMD8131 "
+		"vendor %x, device %x, devfn %x, name %s\n",
+		PCI_VENDOR_ID_AMD, amd8131_chipset.err_dev,
+		dev_info->devfn, dev_info->ctl_name);
+
+	return 0;
+}
+
+static void amd8131_remove(struct pci_dev *dev)
+{
+	struct amd8131_dev_info *dev_info;
+
+	for (dev_info = amd8131_chipset.devices; dev_info->inst != NO_BRIDGE;
+		dev_info++)
+		if (dev_info->devfn == dev->devfn)
+			break;
+
+	if (dev_info->inst == NO_BRIDGE) /* should never happen */
+		return;
+
+	if (dev_info->edac_dev) {
+		edac_pci_del_device(dev_info->edac_dev->dev);
+		edac_pci_free_ctl_info(dev_info->edac_dev);
+	}
+
+	if (amd8131_chipset.exit)
+		amd8131_chipset.exit(dev_info);
+
+	pci_dev_put(dev_info->dev);
+}
+
+static const struct pci_device_id amd8131_edac_pci_tbl[] = {
+	{
+	PCI_VEND_DEV(AMD, 8131_BRIDGE),
+	.subvendor = PCI_ANY_ID,
+	.subdevice = PCI_ANY_ID,
+	.class = 0,
+	.class_mask = 0,
+	.driver_data = 0,
+	},
+	{
+	0,
+	}			/* table is NULL-terminated */
+};
+MODULE_DEVICE_TABLE(pci, amd8131_edac_pci_tbl);
+
+static struct pci_driver amd8131_edac_driver = {
+	.name = AMD8131_EDAC_MOD_STR,
+	.probe = amd8131_probe,
+	.remove = amd8131_remove,
+	.id_table = amd8131_edac_pci_tbl,
+};
+
+static int __init amd8131_edac_init(void)
+{
+	printk(KERN_INFO "AMD8131 EDAC driver " AMD8131_EDAC_REVISION "\n");
+	printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc.\n");
+
+	/* Only POLL mode supported so far */
+	edac_op_state = EDAC_OPSTATE_POLL;
+
+	return pci_register_driver(&amd8131_edac_driver);
+}
+
+static void __exit amd8131_edac_exit(void)
+{
+	pci_unregister_driver(&amd8131_edac_driver);
+}
+
+module_init(amd8131_edac_init);
+module_exit(amd8131_edac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cao Qingtao <qingtao.cao@windriver.com>\n");
+MODULE_DESCRIPTION("AMD8131 HyperTransport PCI-X Tunnel EDAC kernel module");
diff --git a/drivers/edac/amd8131_edac.h b/drivers/edac/amd8131_edac.h
new file mode 100644
index 000000000..6f8b07131
--- /dev/null
+++ b/drivers/edac/amd8131_edac.h
@@ -0,0 +1,119 @@
+/*
+ * amd8131_edac.h, EDAC defs for AMD8131 hypertransport chip
+ *
+ * Copyright (c) 2008 Wind River Systems, Inc.
+ *
+ * Authors:	Cao Qingtao <qingtao.cao@windriver.com>
+ * 		Benjamin Walsh <benjamin.walsh@windriver.com>
+ * 		Hu Yongqi <yongqi.hu@windriver.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _AMD8131_EDAC_H_
+#define _AMD8131_EDAC_H_
+
+#define DEVFN_PCIX_BRIDGE_NORTH_A	8
+#define DEVFN_PCIX_BRIDGE_NORTH_B	16
+#define DEVFN_PCIX_BRIDGE_SOUTH_A	24
+#define DEVFN_PCIX_BRIDGE_SOUTH_B	32
+
+/************************************************************
+ *	PCI-X Bridge Status and Command Register, DevA:0x04
+ ************************************************************/
+#define REG_STS_CMD	0x04
+enum sts_cmd_bits {
+	STS_CMD_SSE	= BIT(30),
+	STS_CMD_SERREN	= BIT(8)
+};
+
+/************************************************************
+ *	PCI-X Bridge Interrupt and Bridge Control Register,
+ ************************************************************/
+#define REG_INT_CTLR	0x3c
+enum int_ctlr_bits {
+	INT_CTLR_DTSE	= BIT(27),
+	INT_CTLR_DTS	= BIT(26),
+	INT_CTLR_SERR	= BIT(17),
+	INT_CTLR_PERR	= BIT(16)
+};
+
+/************************************************************
+ *	PCI-X Bridge Memory Base-Limit Register, DevA:0x1C
+ ************************************************************/
+#define REG_MEM_LIM	0x1c
+enum mem_limit_bits {
+	MEM_LIMIT_DPE 	= BIT(31),
+	MEM_LIMIT_RSE 	= BIT(30),
+	MEM_LIMIT_RMA 	= BIT(29),
+	MEM_LIMIT_RTA 	= BIT(28),
+	MEM_LIMIT_STA	= BIT(27),
+	MEM_LIMIT_MDPE	= BIT(24),
+	MEM_LIMIT_MASK	= MEM_LIMIT_DPE|MEM_LIMIT_RSE|MEM_LIMIT_RMA|
+				MEM_LIMIT_RTA|MEM_LIMIT_STA|MEM_LIMIT_MDPE
+};
+
+/************************************************************
+ *	Link Configuration And Control Register, side A
+ ************************************************************/
+#define REG_LNK_CTRL_A	0xc4
+
+/************************************************************
+ *	Link Configuration And Control Register, side B
+ ************************************************************/
+#define REG_LNK_CTRL_B  0xc8
+
+enum lnk_ctrl_bits {
+	LNK_CTRL_CRCERR_A	= BIT(9),
+	LNK_CTRL_CRCERR_B	= BIT(8),
+	LNK_CTRL_CRCFEN		= BIT(1)
+};
+
+enum pcix_bridge_inst {
+	NORTH_A = 0,
+	NORTH_B = 1,
+	SOUTH_A = 2,
+	SOUTH_B = 3,
+	NO_BRIDGE = 4
+};
+
+struct amd8131_dev_info {
+	int devfn;
+	enum pcix_bridge_inst inst;
+	struct pci_dev *dev;
+	int edac_idx;	/* pci device index */
+	char *ctl_name;
+	struct edac_pci_ctl_info *edac_dev;
+};
+
+/*
+ * AMD8131 chipset has two pairs of PCIX Bridge and related IOAPIC
+ * Controller, and ATCA-6101 has two AMD8131 chipsets, so there are
+ * four PCIX Bridges on ATCA-6101 altogether.
+ *
+ * These PCIX Bridges share the same PCI Device ID and are all of
+ * Function Zero, they could be discrimated by their pci_dev->devfn.
+ * They share the same set of init/check/exit methods, and their
+ * private structures are collected in the devices[] array.
+ */
+struct amd8131_info {
+	u16 err_dev;	/* PCI Device ID for AMD8131 APIC*/
+	struct amd8131_dev_info *devices;
+	void (*init)(struct amd8131_dev_info *dev_info);
+	void (*exit)(struct amd8131_dev_info *dev_info);
+	void (*check)(struct edac_pci_ctl_info *edac_dev);
+};
+
+#endif /* _AMD8131_EDAC_H_ */
+
diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c
new file mode 100644
index 000000000..bc1f34164
--- /dev/null
+++ b/drivers/edac/cell_edac.c
@@ -0,0 +1,282 @@
+/*
+ * Cell MIC driver for ECC counting
+ *
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ *                <benh@kernel.crashing.org>
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ */
+#undef DEBUG
+
+#include <linux/edac.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/stop_machine.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <asm/machdep.h>
+#include <asm/cell-regs.h>
+
+#include "edac_module.h"
+
+struct cell_edac_priv
+{
+	struct cbe_mic_tm_regs __iomem	*regs;
+	int				node;
+	int				chanmask;
+#ifdef DEBUG
+	u64				prev_fir;
+#endif
+};
+
+static void cell_edac_count_ce(struct mem_ctl_info *mci, int chan, u64 ar)
+{
+	struct cell_edac_priv		*priv = mci->pvt_info;
+	struct csrow_info		*csrow = mci->csrows[0];
+	unsigned long			address, pfn, offset, syndrome;
+
+	dev_dbg(mci->pdev, "ECC CE err on node %d, channel %d, ar = 0x%016llx\n",
+		priv->node, chan, ar);
+
+	/* Address decoding is likely a bit bogus, to dbl check */
+	address = (ar & 0xffffffffe0000000ul) >> 29;
+	if (priv->chanmask == 0x3)
+		address = (address << 1) | chan;
+	pfn = address >> PAGE_SHIFT;
+	offset = address & ~PAGE_MASK;
+	syndrome = (ar & 0x000000001fe00000ul) >> 21;
+
+	/* TODO: Decoding of the error address */
+	edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+			     csrow->first_page + pfn, offset, syndrome,
+			     0, chan, -1, "", "");
+}
+
+static void cell_edac_count_ue(struct mem_ctl_info *mci, int chan, u64 ar)
+{
+	struct cell_edac_priv		*priv = mci->pvt_info;
+	struct csrow_info		*csrow = mci->csrows[0];
+	unsigned long			address, pfn, offset;
+
+	dev_dbg(mci->pdev, "ECC UE err on node %d, channel %d, ar = 0x%016llx\n",
+		priv->node, chan, ar);
+
+	/* Address decoding is likely a bit bogus, to dbl check */
+	address = (ar & 0xffffffffe0000000ul) >> 29;
+	if (priv->chanmask == 0x3)
+		address = (address << 1) | chan;
+	pfn = address >> PAGE_SHIFT;
+	offset = address & ~PAGE_MASK;
+
+	/* TODO: Decoding of the error address */
+	edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+			     csrow->first_page + pfn, offset, 0,
+			     0, chan, -1, "", "");
+}
+
+static void cell_edac_check(struct mem_ctl_info *mci)
+{
+	struct cell_edac_priv		*priv = mci->pvt_info;
+	u64				fir, addreg, clear = 0;
+
+	fir = in_be64(&priv->regs->mic_fir);
+#ifdef DEBUG
+	if (fir != priv->prev_fir) {
+		dev_dbg(mci->pdev, "fir change : 0x%016lx\n", fir);
+		priv->prev_fir = fir;
+	}
+#endif
+	if ((priv->chanmask & 0x1) && (fir & CBE_MIC_FIR_ECC_SINGLE_0_ERR)) {
+		addreg = in_be64(&priv->regs->mic_df_ecc_address_0);
+		clear |= CBE_MIC_FIR_ECC_SINGLE_0_RESET;
+		cell_edac_count_ce(mci, 0, addreg);
+	}
+	if ((priv->chanmask & 0x2) && (fir & CBE_MIC_FIR_ECC_SINGLE_1_ERR)) {
+		addreg = in_be64(&priv->regs->mic_df_ecc_address_1);
+		clear |= CBE_MIC_FIR_ECC_SINGLE_1_RESET;
+		cell_edac_count_ce(mci, 1, addreg);
+	}
+	if ((priv->chanmask & 0x1) && (fir & CBE_MIC_FIR_ECC_MULTI_0_ERR)) {
+		addreg = in_be64(&priv->regs->mic_df_ecc_address_0);
+		clear |= CBE_MIC_FIR_ECC_MULTI_0_RESET;
+		cell_edac_count_ue(mci, 0, addreg);
+	}
+	if ((priv->chanmask & 0x2) && (fir & CBE_MIC_FIR_ECC_MULTI_1_ERR)) {
+		addreg = in_be64(&priv->regs->mic_df_ecc_address_1);
+		clear |= CBE_MIC_FIR_ECC_MULTI_1_RESET;
+		cell_edac_count_ue(mci, 1, addreg);
+	}
+
+	/* The procedure for clearing FIR bits is a bit ... weird */
+	if (clear) {
+		fir &= ~(CBE_MIC_FIR_ECC_ERR_MASK | CBE_MIC_FIR_ECC_SET_MASK);
+		fir |= CBE_MIC_FIR_ECC_RESET_MASK;
+		fir &= ~clear;
+		out_be64(&priv->regs->mic_fir, fir);
+		(void)in_be64(&priv->regs->mic_fir);
+
+		mb();	/* sync up */
+#ifdef DEBUG
+		fir = in_be64(&priv->regs->mic_fir);
+		dev_dbg(mci->pdev, "fir clear  : 0x%016lx\n", fir);
+#endif
+	}
+}
+
+static void cell_edac_init_csrows(struct mem_ctl_info *mci)
+{
+	struct csrow_info		*csrow = mci->csrows[0];
+	struct dimm_info		*dimm;
+	struct cell_edac_priv		*priv = mci->pvt_info;
+	struct device_node		*np;
+	int				j;
+	u32				nr_pages;
+
+	for_each_node_by_name(np, "memory") {
+		struct resource r;
+
+		/* We "know" that the Cell firmware only creates one entry
+		 * in the "memory" nodes. If that changes, this code will
+		 * need to be adapted.
+		 */
+		if (of_address_to_resource(np, 0, &r))
+			continue;
+		if (of_node_to_nid(np) != priv->node)
+			continue;
+		csrow->first_page = r.start >> PAGE_SHIFT;
+		nr_pages = resource_size(&r) >> PAGE_SHIFT;
+		csrow->last_page = csrow->first_page + nr_pages - 1;
+
+		for (j = 0; j < csrow->nr_channels; j++) {
+			dimm = csrow->channels[j]->dimm;
+			dimm->mtype = MEM_XDR;
+			dimm->edac_mode = EDAC_SECDED;
+			dimm->nr_pages = nr_pages / csrow->nr_channels;
+		}
+		dev_dbg(mci->pdev,
+			"Initialized on node %d, chanmask=0x%x,"
+			" first_page=0x%lx, nr_pages=0x%x\n",
+			priv->node, priv->chanmask,
+			csrow->first_page, nr_pages);
+		break;
+	}
+	of_node_put(np);
+}
+
+static int cell_edac_probe(struct platform_device *pdev)
+{
+	struct cbe_mic_tm_regs __iomem	*regs;
+	struct mem_ctl_info		*mci;
+	struct edac_mc_layer		layers[2];
+	struct cell_edac_priv		*priv;
+	u64				reg;
+	int				rc, chanmask, num_chans;
+
+	regs = cbe_get_cpu_mic_tm_regs(cbe_node_to_cpu(pdev->id));
+	if (regs == NULL)
+		return -ENODEV;
+
+	edac_op_state = EDAC_OPSTATE_POLL;
+
+	/* Get channel population */
+	reg = in_be64(&regs->mic_mnt_cfg);
+	dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016llx\n", reg);
+	chanmask = 0;
+	if (reg & CBE_MIC_MNT_CFG_CHAN_0_POP)
+		chanmask |= 0x1;
+	if (reg & CBE_MIC_MNT_CFG_CHAN_1_POP)
+		chanmask |= 0x2;
+	if (chanmask == 0) {
+		dev_warn(&pdev->dev,
+			 "Yuck ! No channel populated ? Aborting !\n");
+		return -ENODEV;
+	}
+	dev_dbg(&pdev->dev, "Initial FIR = 0x%016llx\n",
+		in_be64(&regs->mic_fir));
+
+	/* Allocate & init EDAC MC data structure */
+	num_chans = chanmask == 3 ? 2 : 1;
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = 1;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = num_chans;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(pdev->id, ARRAY_SIZE(layers), layers,
+			    sizeof(struct cell_edac_priv));
+	if (mci == NULL)
+		return -ENOMEM;
+	priv = mci->pvt_info;
+	priv->regs = regs;
+	priv->node = pdev->id;
+	priv->chanmask = chanmask;
+	mci->pdev = &pdev->dev;
+	mci->mtype_cap = MEM_FLAG_XDR;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_EC | EDAC_FLAG_SECDED;
+	mci->mod_name = "cell_edac";
+	mci->ctl_name = "MIC";
+	mci->dev_name = dev_name(&pdev->dev);
+	mci->edac_check = cell_edac_check;
+	cell_edac_init_csrows(mci);
+
+	/* Register with EDAC core */
+	rc = edac_mc_add_mc(mci);
+	if (rc) {
+		dev_err(&pdev->dev, "failed to register with EDAC core\n");
+		edac_mc_free(mci);
+		return rc;
+	}
+
+	return 0;
+}
+
+static int cell_edac_remove(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci = edac_mc_del_mc(&pdev->dev);
+	if (mci)
+		edac_mc_free(mci);
+	return 0;
+}
+
+static struct platform_driver cell_edac_driver = {
+	.driver		= {
+		.name	= "cbe-mic",
+	},
+	.probe		= cell_edac_probe,
+	.remove		= cell_edac_remove,
+};
+
+static int __init cell_edac_init(void)
+{
+	/* Sanity check registers data structure */
+	BUILD_BUG_ON(offsetof(struct cbe_mic_tm_regs,
+			      mic_df_ecc_address_0) != 0xf8);
+	BUILD_BUG_ON(offsetof(struct cbe_mic_tm_regs,
+			      mic_df_ecc_address_1) != 0x1b8);
+	BUILD_BUG_ON(offsetof(struct cbe_mic_tm_regs,
+			      mic_df_config) != 0x218);
+	BUILD_BUG_ON(offsetof(struct cbe_mic_tm_regs,
+			      mic_fir) != 0x230);
+	BUILD_BUG_ON(offsetof(struct cbe_mic_tm_regs,
+			      mic_mnt_cfg) != 0x210);
+	BUILD_BUG_ON(offsetof(struct cbe_mic_tm_regs,
+			      mic_exc) != 0x208);
+
+	return platform_driver_register(&cell_edac_driver);
+}
+
+static void __exit cell_edac_exit(void)
+{
+	platform_driver_unregister(&cell_edac_driver);
+}
+
+module_init(cell_edac_init);
+module_exit(cell_edac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("ECC counting for Cell MIC");
diff --git a/drivers/edac/cpc925_edac.c b/drivers/edac/cpc925_edac.c
new file mode 100644
index 000000000..2c98e020d
--- /dev/null
+++ b/drivers/edac/cpc925_edac.c
@@ -0,0 +1,1095 @@
+/*
+ * cpc925_edac.c, EDAC driver for IBM CPC925 Bridge and Memory Controller.
+ *
+ * Copyright (c) 2008 Wind River Systems, Inc.
+ *
+ * Authors:	Cao Qingtao <qingtao.cao@windriver.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/edac.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/gfp.h>
+
+#include "edac_module.h"
+
+#define CPC925_EDAC_REVISION	" Ver: 1.0.0"
+#define CPC925_EDAC_MOD_STR	"cpc925_edac"
+
+#define cpc925_printk(level, fmt, arg...) \
+	edac_printk(level, "CPC925", fmt, ##arg)
+
+#define cpc925_mc_printk(mci, level, fmt, arg...) \
+	edac_mc_chipset_printk(mci, level, "CPC925", fmt, ##arg)
+
+/*
+ * CPC925 registers are of 32 bits with bit0 defined at the
+ * most significant bit and bit31 at that of least significant.
+ */
+#define CPC925_BITS_PER_REG	32
+#define CPC925_BIT(nr)		(1UL << (CPC925_BITS_PER_REG - 1 - nr))
+
+/*
+ * EDAC device names for the error detections of
+ * CPU Interface and Hypertransport Link.
+ */
+#define CPC925_CPU_ERR_DEV	"cpu"
+#define CPC925_HT_LINK_DEV	"htlink"
+
+/* Suppose DDR Refresh cycle is 15.6 microsecond */
+#define CPC925_REF_FREQ		0xFA69
+#define CPC925_SCRUB_BLOCK_SIZE 64	/* bytes */
+#define CPC925_NR_CSROWS	8
+
+/*
+ * All registers and bits definitions are taken from
+ * "CPC925 Bridge and Memory Controller User Manual, SA14-2761-02".
+ */
+
+/*
+ * CPU and Memory Controller Registers
+ */
+/************************************************************
+ *	Processor Interface Exception Mask Register (APIMASK)
+ ************************************************************/
+#define REG_APIMASK_OFFSET	0x30070
+enum apimask_bits {
+	APIMASK_DART	= CPC925_BIT(0), /* DART Exception */
+	APIMASK_ADI0	= CPC925_BIT(1), /* Handshake Error on PI0_ADI */
+	APIMASK_ADI1	= CPC925_BIT(2), /* Handshake Error on PI1_ADI */
+	APIMASK_STAT	= CPC925_BIT(3), /* Status Exception */
+	APIMASK_DERR	= CPC925_BIT(4), /* Data Error Exception */
+	APIMASK_ADRS0	= CPC925_BIT(5), /* Addressing Exception on PI0 */
+	APIMASK_ADRS1	= CPC925_BIT(6), /* Addressing Exception on PI1 */
+					 /* BIT(7) Reserved */
+	APIMASK_ECC_UE_H = CPC925_BIT(8), /* UECC upper */
+	APIMASK_ECC_CE_H = CPC925_BIT(9), /* CECC upper */
+	APIMASK_ECC_UE_L = CPC925_BIT(10), /* UECC lower */
+	APIMASK_ECC_CE_L = CPC925_BIT(11), /* CECC lower */
+
+	CPU_MASK_ENABLE = (APIMASK_DART | APIMASK_ADI0 | APIMASK_ADI1 |
+			   APIMASK_STAT | APIMASK_DERR | APIMASK_ADRS0 |
+			   APIMASK_ADRS1),
+	ECC_MASK_ENABLE = (APIMASK_ECC_UE_H | APIMASK_ECC_CE_H |
+			   APIMASK_ECC_UE_L | APIMASK_ECC_CE_L),
+};
+#define APIMASK_ADI(n)		CPC925_BIT(((n)+1))
+
+/************************************************************
+ *	Processor Interface Exception Register (APIEXCP)
+ ************************************************************/
+#define REG_APIEXCP_OFFSET	0x30060
+enum apiexcp_bits {
+	APIEXCP_DART	= CPC925_BIT(0), /* DART Exception */
+	APIEXCP_ADI0	= CPC925_BIT(1), /* Handshake Error on PI0_ADI */
+	APIEXCP_ADI1	= CPC925_BIT(2), /* Handshake Error on PI1_ADI */
+	APIEXCP_STAT	= CPC925_BIT(3), /* Status Exception */
+	APIEXCP_DERR	= CPC925_BIT(4), /* Data Error Exception */
+	APIEXCP_ADRS0	= CPC925_BIT(5), /* Addressing Exception on PI0 */
+	APIEXCP_ADRS1	= CPC925_BIT(6), /* Addressing Exception on PI1 */
+					 /* BIT(7) Reserved */
+	APIEXCP_ECC_UE_H = CPC925_BIT(8), /* UECC upper */
+	APIEXCP_ECC_CE_H = CPC925_BIT(9), /* CECC upper */
+	APIEXCP_ECC_UE_L = CPC925_BIT(10), /* UECC lower */
+	APIEXCP_ECC_CE_L = CPC925_BIT(11), /* CECC lower */
+
+	CPU_EXCP_DETECTED = (APIEXCP_DART | APIEXCP_ADI0 | APIEXCP_ADI1 |
+			     APIEXCP_STAT | APIEXCP_DERR | APIEXCP_ADRS0 |
+			     APIEXCP_ADRS1),
+	UECC_EXCP_DETECTED = (APIEXCP_ECC_UE_H | APIEXCP_ECC_UE_L),
+	CECC_EXCP_DETECTED = (APIEXCP_ECC_CE_H | APIEXCP_ECC_CE_L),
+	ECC_EXCP_DETECTED = (UECC_EXCP_DETECTED | CECC_EXCP_DETECTED),
+};
+
+/************************************************************
+ *	Memory Bus Configuration Register (MBCR)
+************************************************************/
+#define REG_MBCR_OFFSET		0x2190
+#define MBCR_64BITCFG_SHIFT	23
+#define MBCR_64BITCFG_MASK	(1UL << MBCR_64BITCFG_SHIFT)
+#define MBCR_64BITBUS_SHIFT	22
+#define MBCR_64BITBUS_MASK	(1UL << MBCR_64BITBUS_SHIFT)
+
+/************************************************************
+ *	Memory Bank Mode Register (MBMR)
+************************************************************/
+#define REG_MBMR_OFFSET		0x21C0
+#define MBMR_MODE_MAX_VALUE	0xF
+#define MBMR_MODE_SHIFT		25
+#define MBMR_MODE_MASK		(MBMR_MODE_MAX_VALUE << MBMR_MODE_SHIFT)
+#define MBMR_BBA_SHIFT		24
+#define MBMR_BBA_MASK		(1UL << MBMR_BBA_SHIFT)
+
+/************************************************************
+ *	Memory Bank Boundary Address Register (MBBAR)
+ ************************************************************/
+#define REG_MBBAR_OFFSET	0x21D0
+#define MBBAR_BBA_MAX_VALUE	0xFF
+#define MBBAR_BBA_SHIFT		24
+#define MBBAR_BBA_MASK		(MBBAR_BBA_MAX_VALUE << MBBAR_BBA_SHIFT)
+
+/************************************************************
+ *	Memory Scrub Control Register (MSCR)
+ ************************************************************/
+#define REG_MSCR_OFFSET		0x2400
+#define MSCR_SCRUB_MOD_MASK	0xC0000000 /* scrub_mod - bit0:1*/
+#define MSCR_BACKGR_SCRUB	0x40000000 /* 01 */
+#define MSCR_SI_SHIFT		16 	/* si - bit8:15*/
+#define MSCR_SI_MAX_VALUE	0xFF
+#define MSCR_SI_MASK		(MSCR_SI_MAX_VALUE << MSCR_SI_SHIFT)
+
+/************************************************************
+ *	Memory Scrub Range Start Register (MSRSR)
+ ************************************************************/
+#define REG_MSRSR_OFFSET	0x2410
+
+/************************************************************
+ *	Memory Scrub Range End Register (MSRER)
+ ************************************************************/
+#define REG_MSRER_OFFSET	0x2420
+
+/************************************************************
+ *	Memory Scrub Pattern Register (MSPR)
+ ************************************************************/
+#define REG_MSPR_OFFSET		0x2430
+
+/************************************************************
+ *	Memory Check Control Register (MCCR)
+ ************************************************************/
+#define REG_MCCR_OFFSET		0x2440
+enum mccr_bits {
+	MCCR_ECC_EN	= CPC925_BIT(0), /* ECC high and low check */
+};
+
+/************************************************************
+ *	Memory Check Range End Register (MCRER)
+ ************************************************************/
+#define REG_MCRER_OFFSET	0x2450
+
+/************************************************************
+ *	Memory Error Address Register (MEAR)
+ ************************************************************/
+#define REG_MEAR_OFFSET		0x2460
+#define MEAR_BCNT_MAX_VALUE	0x3
+#define MEAR_BCNT_SHIFT		30
+#define MEAR_BCNT_MASK		(MEAR_BCNT_MAX_VALUE << MEAR_BCNT_SHIFT)
+#define MEAR_RANK_MAX_VALUE	0x7
+#define MEAR_RANK_SHIFT		27
+#define MEAR_RANK_MASK		(MEAR_RANK_MAX_VALUE << MEAR_RANK_SHIFT)
+#define MEAR_COL_MAX_VALUE	0x7FF
+#define MEAR_COL_SHIFT		16
+#define MEAR_COL_MASK		(MEAR_COL_MAX_VALUE << MEAR_COL_SHIFT)
+#define MEAR_BANK_MAX_VALUE	0x3
+#define MEAR_BANK_SHIFT		14
+#define MEAR_BANK_MASK		(MEAR_BANK_MAX_VALUE << MEAR_BANK_SHIFT)
+#define MEAR_ROW_MASK		0x00003FFF
+
+/************************************************************
+ *	Memory Error Syndrome Register (MESR)
+ ************************************************************/
+#define REG_MESR_OFFSET		0x2470
+#define MESR_ECC_SYN_H_MASK	0xFF00
+#define MESR_ECC_SYN_L_MASK	0x00FF
+
+/************************************************************
+ *	Memory Mode Control Register (MMCR)
+ ************************************************************/
+#define REG_MMCR_OFFSET		0x2500
+enum mmcr_bits {
+	MMCR_REG_DIMM_MODE = CPC925_BIT(3),
+};
+
+/*
+ * HyperTransport Link Registers
+ */
+/************************************************************
+ *  Error Handling/Enumeration Scratch Pad Register (ERRCTRL)
+ ************************************************************/
+#define REG_ERRCTRL_OFFSET	0x70140
+enum errctrl_bits {			 /* nonfatal interrupts for */
+	ERRCTRL_SERR_NF	= CPC925_BIT(0), /* system error */
+	ERRCTRL_CRC_NF	= CPC925_BIT(1), /* CRC error */
+	ERRCTRL_RSP_NF	= CPC925_BIT(2), /* Response error */
+	ERRCTRL_EOC_NF	= CPC925_BIT(3), /* End-Of-Chain error */
+	ERRCTRL_OVF_NF	= CPC925_BIT(4), /* Overflow error */
+	ERRCTRL_PROT_NF	= CPC925_BIT(5), /* Protocol error */
+
+	ERRCTRL_RSP_ERR	= CPC925_BIT(6), /* Response error received */
+	ERRCTRL_CHN_FAL = CPC925_BIT(7), /* Sync flooding detected */
+
+	HT_ERRCTRL_ENABLE = (ERRCTRL_SERR_NF | ERRCTRL_CRC_NF |
+			     ERRCTRL_RSP_NF | ERRCTRL_EOC_NF |
+			     ERRCTRL_OVF_NF | ERRCTRL_PROT_NF),
+	HT_ERRCTRL_DETECTED = (ERRCTRL_RSP_ERR | ERRCTRL_CHN_FAL),
+};
+
+/************************************************************
+ *  Link Configuration and Link Control Register (LINKCTRL)
+ ************************************************************/
+#define REG_LINKCTRL_OFFSET	0x70110
+enum linkctrl_bits {
+	LINKCTRL_CRC_ERR	= (CPC925_BIT(22) | CPC925_BIT(23)),
+	LINKCTRL_LINK_FAIL	= CPC925_BIT(27),
+
+	HT_LINKCTRL_DETECTED	= (LINKCTRL_CRC_ERR | LINKCTRL_LINK_FAIL),
+};
+
+/************************************************************
+ *  Link FreqCap/Error/Freq/Revision ID Register (LINKERR)
+ ************************************************************/
+#define REG_LINKERR_OFFSET	0x70120
+enum linkerr_bits {
+	LINKERR_EOC_ERR		= CPC925_BIT(17), /* End-Of-Chain error */
+	LINKERR_OVF_ERR		= CPC925_BIT(18), /* Receive Buffer Overflow */
+	LINKERR_PROT_ERR	= CPC925_BIT(19), /* Protocol error */
+
+	HT_LINKERR_DETECTED	= (LINKERR_EOC_ERR | LINKERR_OVF_ERR |
+				   LINKERR_PROT_ERR),
+};
+
+/************************************************************
+ *	Bridge Control Register (BRGCTRL)
+ ************************************************************/
+#define REG_BRGCTRL_OFFSET	0x70300
+enum brgctrl_bits {
+	BRGCTRL_DETSERR = CPC925_BIT(0), /* SERR on Secondary Bus */
+	BRGCTRL_SECBUSRESET = CPC925_BIT(9), /* Secondary Bus Reset */
+};
+
+/* Private structure for edac memory controller */
+struct cpc925_mc_pdata {
+	void __iomem *vbase;
+	unsigned long total_mem;
+	const char *name;
+	int edac_idx;
+};
+
+/* Private structure for common edac device */
+struct cpc925_dev_info {
+	void __iomem *vbase;
+	struct platform_device *pdev;
+	char *ctl_name;
+	int edac_idx;
+	struct edac_device_ctl_info *edac_dev;
+	void (*init)(struct cpc925_dev_info *dev_info);
+	void (*exit)(struct cpc925_dev_info *dev_info);
+	void (*check)(struct edac_device_ctl_info *edac_dev);
+};
+
+/* Get total memory size from Open Firmware DTB */
+static void get_total_mem(struct cpc925_mc_pdata *pdata)
+{
+	struct device_node *np = NULL;
+	const unsigned int *reg, *reg_end;
+	int len, sw, aw;
+	unsigned long start, size;
+
+	np = of_find_node_by_type(NULL, "memory");
+	if (!np)
+		return;
+
+	aw = of_n_addr_cells(np);
+	sw = of_n_size_cells(np);
+	reg = (const unsigned int *)of_get_property(np, "reg", &len);
+	reg_end = reg + len/4;
+
+	pdata->total_mem = 0;
+	do {
+		start = of_read_number(reg, aw);
+		reg += aw;
+		size = of_read_number(reg, sw);
+		reg += sw;
+		edac_dbg(1, "start 0x%lx, size 0x%lx\n", start, size);
+		pdata->total_mem += size;
+	} while (reg < reg_end);
+
+	of_node_put(np);
+	edac_dbg(0, "total_mem 0x%lx\n", pdata->total_mem);
+}
+
+static void cpc925_init_csrows(struct mem_ctl_info *mci)
+{
+	struct cpc925_mc_pdata *pdata = mci->pvt_info;
+	struct csrow_info *csrow;
+	struct dimm_info *dimm;
+	enum dev_type dtype;
+	int index, j;
+	u32 mbmr, mbbar, bba, grain;
+	unsigned long row_size, nr_pages, last_nr_pages = 0;
+
+	get_total_mem(pdata);
+
+	for (index = 0; index < mci->nr_csrows; index++) {
+		mbmr = __raw_readl(pdata->vbase + REG_MBMR_OFFSET +
+				   0x20 * index);
+		mbbar = __raw_readl(pdata->vbase + REG_MBBAR_OFFSET +
+				   0x20 + index);
+		bba = (((mbmr & MBMR_BBA_MASK) >> MBMR_BBA_SHIFT) << 8) |
+		       ((mbbar & MBBAR_BBA_MASK) >> MBBAR_BBA_SHIFT);
+
+		if (bba == 0)
+			continue; /* not populated */
+
+		csrow = mci->csrows[index];
+
+		row_size = bba * (1UL << 28);	/* 256M */
+		csrow->first_page = last_nr_pages;
+		nr_pages = row_size >> PAGE_SHIFT;
+		csrow->last_page = csrow->first_page + nr_pages - 1;
+		last_nr_pages = csrow->last_page + 1;
+
+		switch (csrow->nr_channels) {
+		case 1: /* Single channel */
+			grain = 32; /* four-beat burst of 32 bytes */
+			break;
+		case 2: /* Dual channel */
+		default:
+			grain = 64; /* four-beat burst of 64 bytes */
+			break;
+		}
+		switch ((mbmr & MBMR_MODE_MASK) >> MBMR_MODE_SHIFT) {
+		case 6: /* 0110, no way to differentiate X8 VS X16 */
+		case 5:	/* 0101 */
+		case 8: /* 1000 */
+			dtype = DEV_X16;
+			break;
+		case 7: /* 0111 */
+		case 9: /* 1001 */
+			dtype = DEV_X8;
+			break;
+		default:
+			dtype = DEV_UNKNOWN;
+		break;
+		}
+		for (j = 0; j < csrow->nr_channels; j++) {
+			dimm = csrow->channels[j]->dimm;
+			dimm->nr_pages = nr_pages / csrow->nr_channels;
+			dimm->mtype = MEM_RDDR;
+			dimm->edac_mode = EDAC_SECDED;
+			dimm->grain = grain;
+			dimm->dtype = dtype;
+		}
+	}
+}
+
+/* Enable memory controller ECC detection */
+static void cpc925_mc_init(struct mem_ctl_info *mci)
+{
+	struct cpc925_mc_pdata *pdata = mci->pvt_info;
+	u32 apimask;
+	u32 mccr;
+
+	/* Enable various ECC error exceptions */
+	apimask = __raw_readl(pdata->vbase + REG_APIMASK_OFFSET);
+	if ((apimask & ECC_MASK_ENABLE) == 0) {
+		apimask |= ECC_MASK_ENABLE;
+		__raw_writel(apimask, pdata->vbase + REG_APIMASK_OFFSET);
+	}
+
+	/* Enable ECC detection */
+	mccr = __raw_readl(pdata->vbase + REG_MCCR_OFFSET);
+	if ((mccr & MCCR_ECC_EN) == 0) {
+		mccr |= MCCR_ECC_EN;
+		__raw_writel(mccr, pdata->vbase + REG_MCCR_OFFSET);
+	}
+}
+
+/* Disable memory controller ECC detection */
+static void cpc925_mc_exit(struct mem_ctl_info *mci)
+{
+	/*
+	 * WARNING:
+	 * We are supposed to clear the ECC error detection bits,
+	 * and it will be no problem to do so. However, once they
+	 * are cleared here if we want to re-install CPC925 EDAC
+	 * module later, setting them up in cpc925_mc_init() will
+	 * trigger machine check exception.
+	 * Also, it's ok to leave ECC error detection bits enabled,
+	 * since they are reset to 1 by default or by boot loader.
+	 */
+
+	return;
+}
+
+/*
+ * Revert DDR column/row/bank addresses into page frame number and
+ * offset in page.
+ *
+ * Suppose memory mode is 0x0111(128-bit mode, identical DIMM pairs),
+ * physical address(PA) bits to column address(CA) bits mappings are:
+ * CA	0   1   2   3   4   5   6   7   8   9   10
+ * PA	59  58  57  56  55  54  53  52  51  50  49
+ *
+ * physical address(PA) bits to bank address(BA) bits mappings are:
+ * BA	0   1
+ * PA	43  44
+ *
+ * physical address(PA) bits to row address(RA) bits mappings are:
+ * RA	0   1   2   3   4   5   6   7   8   9   10   11   12
+ * PA	36  35  34  48  47  46  45  40  41  42  39   38   37
+ */
+static void cpc925_mc_get_pfn(struct mem_ctl_info *mci, u32 mear,
+		unsigned long *pfn, unsigned long *offset, int *csrow)
+{
+	u32 bcnt, rank, col, bank, row;
+	u32 c;
+	unsigned long pa;
+	int i;
+
+	bcnt = (mear & MEAR_BCNT_MASK) >> MEAR_BCNT_SHIFT;
+	rank = (mear & MEAR_RANK_MASK) >> MEAR_RANK_SHIFT;
+	col = (mear & MEAR_COL_MASK) >> MEAR_COL_SHIFT;
+	bank = (mear & MEAR_BANK_MASK) >> MEAR_BANK_SHIFT;
+	row = mear & MEAR_ROW_MASK;
+
+	*csrow = rank;
+
+#ifdef CONFIG_EDAC_DEBUG
+	if (mci->csrows[rank]->first_page == 0) {
+		cpc925_mc_printk(mci, KERN_ERR, "ECC occurs in a "
+			"non-populated csrow, broken hardware?\n");
+		return;
+	}
+#endif
+
+	/* Revert csrow number */
+	pa = mci->csrows[rank]->first_page << PAGE_SHIFT;
+
+	/* Revert column address */
+	col += bcnt;
+	for (i = 0; i < 11; i++) {
+		c = col & 0x1;
+		col >>= 1;
+		pa |= c << (14 - i);
+	}
+
+	/* Revert bank address */
+	pa |= bank << 19;
+
+	/* Revert row address, in 4 steps */
+	for (i = 0; i < 3; i++) {
+		c = row & 0x1;
+		row >>= 1;
+		pa |= c << (26 - i);
+	}
+
+	for (i = 0; i < 3; i++) {
+		c = row & 0x1;
+		row >>= 1;
+		pa |= c << (21 + i);
+	}
+
+	for (i = 0; i < 4; i++) {
+		c = row & 0x1;
+		row >>= 1;
+		pa |= c << (18 - i);
+	}
+
+	for (i = 0; i < 3; i++) {
+		c = row & 0x1;
+		row >>= 1;
+		pa |= c << (29 - i);
+	}
+
+	*offset = pa & (PAGE_SIZE - 1);
+	*pfn = pa >> PAGE_SHIFT;
+
+	edac_dbg(0, "ECC physical address 0x%lx\n", pa);
+}
+
+static int cpc925_mc_find_channel(struct mem_ctl_info *mci, u16 syndrome)
+{
+	if ((syndrome & MESR_ECC_SYN_H_MASK) == 0)
+		return 0;
+
+	if ((syndrome & MESR_ECC_SYN_L_MASK) == 0)
+		return 1;
+
+	cpc925_mc_printk(mci, KERN_INFO, "Unexpected syndrome value: 0x%x\n",
+			 syndrome);
+	return 1;
+}
+
+/* Check memory controller registers for ECC errors */
+static void cpc925_mc_check(struct mem_ctl_info *mci)
+{
+	struct cpc925_mc_pdata *pdata = mci->pvt_info;
+	u32 apiexcp;
+	u32 mear;
+	u32 mesr;
+	u16 syndrome;
+	unsigned long pfn = 0, offset = 0;
+	int csrow = 0, channel = 0;
+
+	/* APIEXCP is cleared when read */
+	apiexcp = __raw_readl(pdata->vbase + REG_APIEXCP_OFFSET);
+	if ((apiexcp & ECC_EXCP_DETECTED) == 0)
+		return;
+
+	mesr = __raw_readl(pdata->vbase + REG_MESR_OFFSET);
+	syndrome = mesr | (MESR_ECC_SYN_H_MASK | MESR_ECC_SYN_L_MASK);
+
+	mear = __raw_readl(pdata->vbase + REG_MEAR_OFFSET);
+
+	/* Revert column/row addresses into page frame number, etc */
+	cpc925_mc_get_pfn(mci, mear, &pfn, &offset, &csrow);
+
+	if (apiexcp & CECC_EXCP_DETECTED) {
+		cpc925_mc_printk(mci, KERN_INFO, "DRAM CECC Fault\n");
+		channel = cpc925_mc_find_channel(mci, syndrome);
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+				     pfn, offset, syndrome,
+				     csrow, channel, -1,
+				     mci->ctl_name, "");
+	}
+
+	if (apiexcp & UECC_EXCP_DETECTED) {
+		cpc925_mc_printk(mci, KERN_INFO, "DRAM UECC Fault\n");
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+				     pfn, offset, 0,
+				     csrow, -1, -1,
+				     mci->ctl_name, "");
+	}
+
+	cpc925_mc_printk(mci, KERN_INFO, "Dump registers:\n");
+	cpc925_mc_printk(mci, KERN_INFO, "APIMASK		0x%08x\n",
+		__raw_readl(pdata->vbase + REG_APIMASK_OFFSET));
+	cpc925_mc_printk(mci, KERN_INFO, "APIEXCP		0x%08x\n",
+		apiexcp);
+	cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Ctrl	0x%08x\n",
+		__raw_readl(pdata->vbase + REG_MSCR_OFFSET));
+	cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Rge Start	0x%08x\n",
+		__raw_readl(pdata->vbase + REG_MSRSR_OFFSET));
+	cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Rge End	0x%08x\n",
+		__raw_readl(pdata->vbase + REG_MSRER_OFFSET));
+	cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Pattern	0x%08x\n",
+		__raw_readl(pdata->vbase + REG_MSPR_OFFSET));
+	cpc925_mc_printk(mci, KERN_INFO, "Mem Chk Ctrl		0x%08x\n",
+		__raw_readl(pdata->vbase + REG_MCCR_OFFSET));
+	cpc925_mc_printk(mci, KERN_INFO, "Mem Chk Rge End	0x%08x\n",
+		__raw_readl(pdata->vbase + REG_MCRER_OFFSET));
+	cpc925_mc_printk(mci, KERN_INFO, "Mem Err Address	0x%08x\n",
+		mesr);
+	cpc925_mc_printk(mci, KERN_INFO, "Mem Err Syndrome	0x%08x\n",
+		syndrome);
+}
+
+/******************** CPU err device********************************/
+static u32 cpc925_cpu_mask_disabled(void)
+{
+	struct device_node *cpus;
+	struct device_node *cpunode = NULL;
+	static u32 mask = 0;
+
+	/* use cached value if available */
+	if (mask != 0)
+		return mask;
+
+	mask = APIMASK_ADI0 | APIMASK_ADI1;
+
+	cpus = of_find_node_by_path("/cpus");
+	if (cpus == NULL) {
+		cpc925_printk(KERN_DEBUG, "No /cpus node !\n");
+		return 0;
+	}
+
+	while ((cpunode = of_get_next_child(cpus, cpunode)) != NULL) {
+		const u32 *reg = of_get_property(cpunode, "reg", NULL);
+
+		if (strcmp(cpunode->type, "cpu")) {
+			cpc925_printk(KERN_ERR, "Not a cpu node in /cpus: %s\n", cpunode->name);
+			continue;
+		}
+
+		if (reg == NULL || *reg > 2) {
+			cpc925_printk(KERN_ERR, "Bad reg value at %pOF\n", cpunode);
+			continue;
+		}
+
+		mask &= ~APIMASK_ADI(*reg);
+	}
+
+	if (mask != (APIMASK_ADI0 | APIMASK_ADI1)) {
+		/* We assume that each CPU sits on it's own PI and that
+		 * for present CPUs the reg property equals to the PI
+		 * interface id */
+		cpc925_printk(KERN_WARNING,
+				"Assuming PI id is equal to CPU MPIC id!\n");
+	}
+
+	of_node_put(cpunode);
+	of_node_put(cpus);
+
+	return mask;
+}
+
+/* Enable CPU Errors detection */
+static void cpc925_cpu_init(struct cpc925_dev_info *dev_info)
+{
+	u32 apimask;
+	u32 cpumask;
+
+	apimask = __raw_readl(dev_info->vbase + REG_APIMASK_OFFSET);
+
+	cpumask = cpc925_cpu_mask_disabled();
+	if (apimask & cpumask) {
+		cpc925_printk(KERN_WARNING, "CPU(s) not present, "
+				"but enabled in APIMASK, disabling\n");
+		apimask &= ~cpumask;
+	}
+
+	if ((apimask & CPU_MASK_ENABLE) == 0)
+		apimask |= CPU_MASK_ENABLE;
+
+	__raw_writel(apimask, dev_info->vbase + REG_APIMASK_OFFSET);
+}
+
+/* Disable CPU Errors detection */
+static void cpc925_cpu_exit(struct cpc925_dev_info *dev_info)
+{
+	/*
+	 * WARNING:
+	 * We are supposed to clear the CPU error detection bits,
+	 * and it will be no problem to do so. However, once they
+	 * are cleared here if we want to re-install CPC925 EDAC
+	 * module later, setting them up in cpc925_cpu_init() will
+	 * trigger machine check exception.
+	 * Also, it's ok to leave CPU error detection bits enabled,
+	 * since they are reset to 1 by default.
+	 */
+
+	return;
+}
+
+/* Check for CPU Errors */
+static void cpc925_cpu_check(struct edac_device_ctl_info *edac_dev)
+{
+	struct cpc925_dev_info *dev_info = edac_dev->pvt_info;
+	u32 apiexcp;
+	u32 apimask;
+
+	/* APIEXCP is cleared when read */
+	apiexcp = __raw_readl(dev_info->vbase + REG_APIEXCP_OFFSET);
+	if ((apiexcp & CPU_EXCP_DETECTED) == 0)
+		return;
+
+	if ((apiexcp & ~cpc925_cpu_mask_disabled()) == 0)
+		return;
+
+	apimask = __raw_readl(dev_info->vbase + REG_APIMASK_OFFSET);
+	cpc925_printk(KERN_INFO, "Processor Interface Fault\n"
+				 "Processor Interface register dump:\n");
+	cpc925_printk(KERN_INFO, "APIMASK		0x%08x\n", apimask);
+	cpc925_printk(KERN_INFO, "APIEXCP		0x%08x\n", apiexcp);
+
+	edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name);
+}
+
+/******************** HT Link err device****************************/
+/* Enable HyperTransport Link Error detection */
+static void cpc925_htlink_init(struct cpc925_dev_info *dev_info)
+{
+	u32 ht_errctrl;
+
+	ht_errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET);
+	if ((ht_errctrl & HT_ERRCTRL_ENABLE) == 0) {
+		ht_errctrl |= HT_ERRCTRL_ENABLE;
+		__raw_writel(ht_errctrl, dev_info->vbase + REG_ERRCTRL_OFFSET);
+	}
+}
+
+/* Disable HyperTransport Link Error detection */
+static void cpc925_htlink_exit(struct cpc925_dev_info *dev_info)
+{
+	u32 ht_errctrl;
+
+	ht_errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET);
+	ht_errctrl &= ~HT_ERRCTRL_ENABLE;
+	__raw_writel(ht_errctrl, dev_info->vbase + REG_ERRCTRL_OFFSET);
+}
+
+/* Check for HyperTransport Link errors */
+static void cpc925_htlink_check(struct edac_device_ctl_info *edac_dev)
+{
+	struct cpc925_dev_info *dev_info = edac_dev->pvt_info;
+	u32 brgctrl = __raw_readl(dev_info->vbase + REG_BRGCTRL_OFFSET);
+	u32 linkctrl = __raw_readl(dev_info->vbase + REG_LINKCTRL_OFFSET);
+	u32 errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET);
+	u32 linkerr = __raw_readl(dev_info->vbase + REG_LINKERR_OFFSET);
+
+	if (!((brgctrl & BRGCTRL_DETSERR) ||
+	      (linkctrl & HT_LINKCTRL_DETECTED) ||
+	      (errctrl & HT_ERRCTRL_DETECTED) ||
+	      (linkerr & HT_LINKERR_DETECTED)))
+		return;
+
+	cpc925_printk(KERN_INFO, "HT Link Fault\n"
+				 "HT register dump:\n");
+	cpc925_printk(KERN_INFO, "Bridge Ctrl			0x%08x\n",
+		      brgctrl);
+	cpc925_printk(KERN_INFO, "Link Config Ctrl		0x%08x\n",
+		      linkctrl);
+	cpc925_printk(KERN_INFO, "Error Enum and Ctrl		0x%08x\n",
+		      errctrl);
+	cpc925_printk(KERN_INFO, "Link Error			0x%08x\n",
+		      linkerr);
+
+	/* Clear by write 1 */
+	if (brgctrl & BRGCTRL_DETSERR)
+		__raw_writel(BRGCTRL_DETSERR,
+				dev_info->vbase + REG_BRGCTRL_OFFSET);
+
+	if (linkctrl & HT_LINKCTRL_DETECTED)
+		__raw_writel(HT_LINKCTRL_DETECTED,
+				dev_info->vbase + REG_LINKCTRL_OFFSET);
+
+	/* Initiate Secondary Bus Reset to clear the chain failure */
+	if (errctrl & ERRCTRL_CHN_FAL)
+		__raw_writel(BRGCTRL_SECBUSRESET,
+				dev_info->vbase + REG_BRGCTRL_OFFSET);
+
+	if (errctrl & ERRCTRL_RSP_ERR)
+		__raw_writel(ERRCTRL_RSP_ERR,
+				dev_info->vbase + REG_ERRCTRL_OFFSET);
+
+	if (linkerr & HT_LINKERR_DETECTED)
+		__raw_writel(HT_LINKERR_DETECTED,
+				dev_info->vbase + REG_LINKERR_OFFSET);
+
+	edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name);
+}
+
+static struct cpc925_dev_info cpc925_devs[] = {
+	{
+	.ctl_name = CPC925_CPU_ERR_DEV,
+	.init = cpc925_cpu_init,
+	.exit = cpc925_cpu_exit,
+	.check = cpc925_cpu_check,
+	},
+	{
+	.ctl_name = CPC925_HT_LINK_DEV,
+	.init = cpc925_htlink_init,
+	.exit = cpc925_htlink_exit,
+	.check = cpc925_htlink_check,
+	},
+	{ }
+};
+
+/*
+ * Add CPU Err detection and HyperTransport Link Err detection
+ * as common "edac_device", they have no corresponding device
+ * nodes in the Open Firmware DTB and we have to add platform
+ * devices for them. Also, they will share the MMIO with that
+ * of memory controller.
+ */
+static void cpc925_add_edac_devices(void __iomem *vbase)
+{
+	struct cpc925_dev_info *dev_info;
+
+	if (!vbase) {
+		cpc925_printk(KERN_ERR, "MMIO not established yet\n");
+		return;
+	}
+
+	for (dev_info = &cpc925_devs[0]; dev_info->init; dev_info++) {
+		dev_info->vbase = vbase;
+		dev_info->pdev = platform_device_register_simple(
+					dev_info->ctl_name, 0, NULL, 0);
+		if (IS_ERR(dev_info->pdev)) {
+			cpc925_printk(KERN_ERR,
+				"Can't register platform device for %s\n",
+				dev_info->ctl_name);
+			continue;
+		}
+
+		/*
+		 * Don't have to allocate private structure but
+		 * make use of cpc925_devs[] instead.
+		 */
+		dev_info->edac_idx = edac_device_alloc_index();
+		dev_info->edac_dev =
+			edac_device_alloc_ctl_info(0, dev_info->ctl_name,
+				1, NULL, 0, 0, NULL, 0, dev_info->edac_idx);
+		if (!dev_info->edac_dev) {
+			cpc925_printk(KERN_ERR, "No memory for edac device\n");
+			goto err1;
+		}
+
+		dev_info->edac_dev->pvt_info = dev_info;
+		dev_info->edac_dev->dev = &dev_info->pdev->dev;
+		dev_info->edac_dev->ctl_name = dev_info->ctl_name;
+		dev_info->edac_dev->mod_name = CPC925_EDAC_MOD_STR;
+		dev_info->edac_dev->dev_name = dev_name(&dev_info->pdev->dev);
+
+		if (edac_op_state == EDAC_OPSTATE_POLL)
+			dev_info->edac_dev->edac_check = dev_info->check;
+
+		if (dev_info->init)
+			dev_info->init(dev_info);
+
+		if (edac_device_add_device(dev_info->edac_dev) > 0) {
+			cpc925_printk(KERN_ERR,
+				"Unable to add edac device for %s\n",
+				dev_info->ctl_name);
+			goto err2;
+		}
+
+		edac_dbg(0, "Successfully added edac device for %s\n",
+			 dev_info->ctl_name);
+
+		continue;
+
+err2:
+		if (dev_info->exit)
+			dev_info->exit(dev_info);
+		edac_device_free_ctl_info(dev_info->edac_dev);
+err1:
+		platform_device_unregister(dev_info->pdev);
+	}
+}
+
+/*
+ * Delete the common "edac_device" for CPU Err Detection
+ * and HyperTransport Link Err Detection
+ */
+static void cpc925_del_edac_devices(void)
+{
+	struct cpc925_dev_info *dev_info;
+
+	for (dev_info = &cpc925_devs[0]; dev_info->init; dev_info++) {
+		if (dev_info->edac_dev) {
+			edac_device_del_device(dev_info->edac_dev->dev);
+			edac_device_free_ctl_info(dev_info->edac_dev);
+			platform_device_unregister(dev_info->pdev);
+		}
+
+		if (dev_info->exit)
+			dev_info->exit(dev_info);
+
+		edac_dbg(0, "Successfully deleted edac device for %s\n",
+			 dev_info->ctl_name);
+	}
+}
+
+/* Convert current back-ground scrub rate into byte/sec bandwidth */
+static int cpc925_get_sdram_scrub_rate(struct mem_ctl_info *mci)
+{
+	struct cpc925_mc_pdata *pdata = mci->pvt_info;
+	int bw;
+	u32 mscr;
+	u8 si;
+
+	mscr = __raw_readl(pdata->vbase + REG_MSCR_OFFSET);
+	si = (mscr & MSCR_SI_MASK) >> MSCR_SI_SHIFT;
+
+	edac_dbg(0, "Mem Scrub Ctrl Register 0x%x\n", mscr);
+
+	if (((mscr & MSCR_SCRUB_MOD_MASK) != MSCR_BACKGR_SCRUB) ||
+	    (si == 0)) {
+		cpc925_mc_printk(mci, KERN_INFO, "Scrub mode not enabled\n");
+		bw = 0;
+	} else
+		bw = CPC925_SCRUB_BLOCK_SIZE * 0xFA67 / si;
+
+	return bw;
+}
+
+/* Return 0 for single channel; 1 for dual channel */
+static int cpc925_mc_get_channels(void __iomem *vbase)
+{
+	int dual = 0;
+	u32 mbcr;
+
+	mbcr = __raw_readl(vbase + REG_MBCR_OFFSET);
+
+	/*
+	 * Dual channel only when 128-bit wide physical bus
+	 * and 128-bit configuration.
+	 */
+	if (((mbcr & MBCR_64BITCFG_MASK) == 0) &&
+	    ((mbcr & MBCR_64BITBUS_MASK) == 0))
+		dual = 1;
+
+	edac_dbg(0, "%s channel\n", (dual > 0) ? "Dual" : "Single");
+
+	return dual;
+}
+
+static int cpc925_probe(struct platform_device *pdev)
+{
+	static int edac_mc_idx;
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[2];
+	void __iomem *vbase;
+	struct cpc925_mc_pdata *pdata;
+	struct resource *r;
+	int res = 0, nr_channels;
+
+	edac_dbg(0, "%s platform device found!\n", pdev->name);
+
+	if (!devres_open_group(&pdev->dev, cpc925_probe, GFP_KERNEL)) {
+		res = -ENOMEM;
+		goto out;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		cpc925_printk(KERN_ERR, "Unable to get resource\n");
+		res = -ENOENT;
+		goto err1;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev,
+				     r->start,
+				     resource_size(r),
+				     pdev->name)) {
+		cpc925_printk(KERN_ERR, "Unable to request mem region\n");
+		res = -EBUSY;
+		goto err1;
+	}
+
+	vbase = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+	if (!vbase) {
+		cpc925_printk(KERN_ERR, "Unable to ioremap device\n");
+		res = -ENOMEM;
+		goto err2;
+	}
+
+	nr_channels = cpc925_mc_get_channels(vbase) + 1;
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = CPC925_NR_CSROWS;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = nr_channels;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), layers,
+			    sizeof(struct cpc925_mc_pdata));
+	if (!mci) {
+		cpc925_printk(KERN_ERR, "No memory for mem_ctl_info\n");
+		res = -ENOMEM;
+		goto err2;
+	}
+
+	pdata = mci->pvt_info;
+	pdata->vbase = vbase;
+	pdata->edac_idx = edac_mc_idx++;
+	pdata->name = pdev->name;
+
+	mci->pdev = &pdev->dev;
+	platform_set_drvdata(pdev, mci);
+	mci->dev_name = dev_name(&pdev->dev);
+	mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_DDR;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->mod_name = CPC925_EDAC_MOD_STR;
+	mci->ctl_name = pdev->name;
+
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		mci->edac_check = cpc925_mc_check;
+
+	mci->ctl_page_to_phys = NULL;
+	mci->scrub_mode = SCRUB_SW_SRC;
+	mci->set_sdram_scrub_rate = NULL;
+	mci->get_sdram_scrub_rate = cpc925_get_sdram_scrub_rate;
+
+	cpc925_init_csrows(mci);
+
+	/* Setup memory controller registers */
+	cpc925_mc_init(mci);
+
+	if (edac_mc_add_mc(mci) > 0) {
+		cpc925_mc_printk(mci, KERN_ERR, "Failed edac_mc_add_mc()\n");
+		goto err3;
+	}
+
+	cpc925_add_edac_devices(vbase);
+
+	/* get this far and it's successful */
+	edac_dbg(0, "success\n");
+
+	res = 0;
+	goto out;
+
+err3:
+	cpc925_mc_exit(mci);
+	edac_mc_free(mci);
+err2:
+	devm_release_mem_region(&pdev->dev, r->start, resource_size(r));
+err1:
+	devres_release_group(&pdev->dev, cpc925_probe);
+out:
+	return res;
+}
+
+static int cpc925_remove(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+	/*
+	 * Delete common edac devices before edac mc, because
+	 * the former share the MMIO of the latter.
+	 */
+	cpc925_del_edac_devices();
+	cpc925_mc_exit(mci);
+
+	edac_mc_del_mc(&pdev->dev);
+	edac_mc_free(mci);
+
+	return 0;
+}
+
+static struct platform_driver cpc925_edac_driver = {
+	.probe = cpc925_probe,
+	.remove = cpc925_remove,
+	.driver = {
+		   .name = "cpc925_edac",
+	}
+};
+
+static int __init cpc925_edac_init(void)
+{
+	int ret = 0;
+
+	printk(KERN_INFO "IBM CPC925 EDAC driver " CPC925_EDAC_REVISION "\n");
+	printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc\n");
+
+	/* Only support POLL mode so far */
+	edac_op_state = EDAC_OPSTATE_POLL;
+
+	ret = platform_driver_register(&cpc925_edac_driver);
+	if (ret) {
+		printk(KERN_WARNING "Failed to register %s\n",
+			CPC925_EDAC_MOD_STR);
+	}
+
+	return ret;
+}
+
+static void __exit cpc925_edac_exit(void)
+{
+	platform_driver_unregister(&cpc925_edac_driver);
+}
+
+module_init(cpc925_edac_init);
+module_exit(cpc925_edac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cao Qingtao <qingtao.cao@windriver.com>");
+MODULE_DESCRIPTION("IBM CPC925 Bridge and MC EDAC kernel module");
diff --git a/drivers/edac/debugfs.c b/drivers/edac/debugfs.c
new file mode 100644
index 000000000..92dbb7e23
--- /dev/null
+++ b/drivers/edac/debugfs.c
@@ -0,0 +1,163 @@
+#include "edac_module.h"
+
+static struct dentry *edac_debugfs;
+
+static ssize_t edac_fake_inject_write(struct file *file,
+				      const char __user *data,
+				      size_t count, loff_t *ppos)
+{
+	struct device *dev = file->private_data;
+	struct mem_ctl_info *mci = to_mci(dev);
+	static enum hw_event_mc_err_type type;
+	u16 errcount = mci->fake_inject_count;
+
+	if (!errcount)
+		errcount = 1;
+
+	type = mci->fake_inject_ue ? HW_EVENT_ERR_UNCORRECTED
+				   : HW_EVENT_ERR_CORRECTED;
+
+	printk(KERN_DEBUG
+	       "Generating %d %s fake error%s to %d.%d.%d to test core handling. NOTE: this won't test the driver-specific decoding logic.\n",
+		errcount,
+		(type == HW_EVENT_ERR_UNCORRECTED) ? "UE" : "CE",
+		errcount > 1 ? "s" : "",
+		mci->fake_inject_layer[0],
+		mci->fake_inject_layer[1],
+		mci->fake_inject_layer[2]
+	       );
+	edac_mc_handle_error(type, mci, errcount, 0, 0, 0,
+			     mci->fake_inject_layer[0],
+			     mci->fake_inject_layer[1],
+			     mci->fake_inject_layer[2],
+			     "FAKE ERROR", "for EDAC testing only");
+
+	return count;
+}
+
+static const struct file_operations debug_fake_inject_fops = {
+	.open = simple_open,
+	.write = edac_fake_inject_write,
+	.llseek = generic_file_llseek,
+};
+
+int __init edac_debugfs_init(void)
+{
+	edac_debugfs = debugfs_create_dir("edac", NULL);
+	if (IS_ERR(edac_debugfs)) {
+		edac_debugfs = NULL;
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+void edac_debugfs_exit(void)
+{
+	debugfs_remove_recursive(edac_debugfs);
+}
+
+int edac_create_debugfs_nodes(struct mem_ctl_info *mci)
+{
+	struct dentry *d, *parent;
+	char name[80];
+	int i;
+
+	if (!edac_debugfs)
+		return -ENODEV;
+
+	d = debugfs_create_dir(mci->dev.kobj.name, edac_debugfs);
+	if (!d)
+		return -ENOMEM;
+	parent = d;
+
+	for (i = 0; i < mci->n_layers; i++) {
+		sprintf(name, "fake_inject_%s",
+			     edac_layer_name[mci->layers[i].type]);
+		d = debugfs_create_u8(name, S_IRUGO | S_IWUSR, parent,
+				      &mci->fake_inject_layer[i]);
+		if (!d)
+			goto nomem;
+	}
+
+	d = debugfs_create_bool("fake_inject_ue", S_IRUGO | S_IWUSR, parent,
+				&mci->fake_inject_ue);
+	if (!d)
+		goto nomem;
+
+	d = debugfs_create_u16("fake_inject_count", S_IRUGO | S_IWUSR, parent,
+				&mci->fake_inject_count);
+	if (!d)
+		goto nomem;
+
+	d = debugfs_create_file("fake_inject", S_IWUSR, parent,
+				&mci->dev,
+				&debug_fake_inject_fops);
+	if (!d)
+		goto nomem;
+
+	mci->debugfs = parent;
+	return 0;
+nomem:
+	edac_debugfs_remove_recursive(mci->debugfs);
+	return -ENOMEM;
+}
+
+/* Create a toplevel dir under EDAC's debugfs hierarchy */
+struct dentry *edac_debugfs_create_dir(const char *dirname)
+{
+	if (!edac_debugfs)
+		return NULL;
+
+	return debugfs_create_dir(dirname, edac_debugfs);
+}
+EXPORT_SYMBOL_GPL(edac_debugfs_create_dir);
+
+/* Create a toplevel dir under EDAC's debugfs hierarchy with parent @parent */
+struct dentry *
+edac_debugfs_create_dir_at(const char *dirname, struct dentry *parent)
+{
+	return debugfs_create_dir(dirname, parent);
+}
+EXPORT_SYMBOL_GPL(edac_debugfs_create_dir_at);
+
+/*
+ * Create a file under EDAC's hierarchy or a sub-hierarchy:
+ *
+ * @name: file name
+ * @mode: file permissions
+ * @parent: parent dentry. If NULL, it becomes the toplevel EDAC dir
+ * @data: private data of caller
+ * @fops: file operations of this file
+ */
+struct dentry *
+edac_debugfs_create_file(const char *name, umode_t mode, struct dentry *parent,
+			 void *data, const struct file_operations *fops)
+{
+	if (!parent)
+		parent = edac_debugfs;
+
+	return debugfs_create_file(name, mode, parent, data, fops);
+}
+EXPORT_SYMBOL_GPL(edac_debugfs_create_file);
+
+/* Wrapper for debugfs_create_x8() */
+struct dentry *edac_debugfs_create_x8(const char *name, umode_t mode,
+				       struct dentry *parent, u8 *value)
+{
+	if (!parent)
+		parent = edac_debugfs;
+
+	return debugfs_create_x8(name, mode, parent, value);
+}
+EXPORT_SYMBOL_GPL(edac_debugfs_create_x8);
+
+/* Wrapper for debugfs_create_x16() */
+struct dentry *edac_debugfs_create_x16(const char *name, umode_t mode,
+				       struct dentry *parent, u16 *value)
+{
+	if (!parent)
+		parent = edac_debugfs;
+
+	return debugfs_create_x16(name, mode, parent, value);
+}
+EXPORT_SYMBOL_GPL(edac_debugfs_create_x16);
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
new file mode 100644
index 000000000..b5de9a13e
--- /dev/null
+++ b/drivers/edac/e752x_edac.c
@@ -0,0 +1,1482 @@
+/*
+ * Intel e752x Memory Controller kernel module
+ * (C) 2004 Linux Networx (http://lnxi.com)
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Implement support for the e7520, E7525, e7320 and i3100 memory controllers.
+ *
+ * Datasheets:
+ *	http://www.intel.in/content/www/in/en/chipsets/e7525-memory-controller-hub-datasheet.html
+ *	ftp://download.intel.com/design/intarch/datashts/31345803.pdf
+ *
+ * Written by Tom Zimmerman
+ *
+ * Contributors:
+ * 	Thayne Harbaugh at realmsys.com (?)
+ * 	Wang Zhenyu at intel.com
+ * 	Dave Jiang at mvista.com
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/edac.h>
+#include "edac_module.h"
+
+#define EDAC_MOD_STR	"e752x_edac"
+
+static int report_non_memory_errors;
+static int force_function_unhide;
+static int sysbus_parity = -1;
+
+static struct edac_pci_ctl_info *e752x_pci;
+
+#define e752x_printk(level, fmt, arg...) \
+	edac_printk(level, "e752x", fmt, ##arg)
+
+#define e752x_mc_printk(mci, level, fmt, arg...) \
+	edac_mc_chipset_printk(mci, level, "e752x", fmt, ##arg)
+
+#ifndef PCI_DEVICE_ID_INTEL_7520_0
+#define PCI_DEVICE_ID_INTEL_7520_0      0x3590
+#endif				/* PCI_DEVICE_ID_INTEL_7520_0      */
+
+#ifndef PCI_DEVICE_ID_INTEL_7520_1_ERR
+#define PCI_DEVICE_ID_INTEL_7520_1_ERR  0x3591
+#endif				/* PCI_DEVICE_ID_INTEL_7520_1_ERR  */
+
+#ifndef PCI_DEVICE_ID_INTEL_7525_0
+#define PCI_DEVICE_ID_INTEL_7525_0      0x359E
+#endif				/* PCI_DEVICE_ID_INTEL_7525_0      */
+
+#ifndef PCI_DEVICE_ID_INTEL_7525_1_ERR
+#define PCI_DEVICE_ID_INTEL_7525_1_ERR  0x3593
+#endif				/* PCI_DEVICE_ID_INTEL_7525_1_ERR  */
+
+#ifndef PCI_DEVICE_ID_INTEL_7320_0
+#define PCI_DEVICE_ID_INTEL_7320_0	0x3592
+#endif				/* PCI_DEVICE_ID_INTEL_7320_0 */
+
+#ifndef PCI_DEVICE_ID_INTEL_7320_1_ERR
+#define PCI_DEVICE_ID_INTEL_7320_1_ERR	0x3593
+#endif				/* PCI_DEVICE_ID_INTEL_7320_1_ERR */
+
+#ifndef PCI_DEVICE_ID_INTEL_3100_0
+#define PCI_DEVICE_ID_INTEL_3100_0	0x35B0
+#endif				/* PCI_DEVICE_ID_INTEL_3100_0 */
+
+#ifndef PCI_DEVICE_ID_INTEL_3100_1_ERR
+#define PCI_DEVICE_ID_INTEL_3100_1_ERR	0x35B1
+#endif				/* PCI_DEVICE_ID_INTEL_3100_1_ERR */
+
+#define E752X_NR_CSROWS		8	/* number of csrows */
+
+/* E752X register addresses - device 0 function 0 */
+#define E752X_MCHSCRB		0x52	/* Memory Scrub register (16b) */
+					/*
+					 * 6:5     Scrub Completion Count
+					 * 3:2     Scrub Rate (i3100 only)
+					 *      01=fast 10=normal
+					 * 1:0     Scrub Mode enable
+					 *      00=off 10=on
+					 */
+#define E752X_DRB		0x60	/* DRAM row boundary register (8b) */
+#define E752X_DRA		0x70	/* DRAM row attribute register (8b) */
+					/*
+					 * 31:30   Device width row 7
+					 *      01=x8 10=x4 11=x8 DDR2
+					 * 27:26   Device width row 6
+					 * 23:22   Device width row 5
+					 * 19:20   Device width row 4
+					 * 15:14   Device width row 3
+					 * 11:10   Device width row 2
+					 *  7:6    Device width row 1
+					 *  3:2    Device width row 0
+					 */
+#define E752X_DRC		0x7C	/* DRAM controller mode reg (32b) */
+					/* FIXME:IS THIS RIGHT? */
+					/*
+					 * 22    Number channels 0=1,1=2
+					 * 19:18 DRB Granularity 32/64MB
+					 */
+#define E752X_DRM		0x80	/* Dimm mapping register */
+#define E752X_DDRCSR		0x9A	/* DDR control and status reg (16b) */
+					/*
+					 * 14:12 1 single A, 2 single B, 3 dual
+					 */
+#define E752X_TOLM		0xC4	/* DRAM top of low memory reg (16b) */
+#define E752X_REMAPBASE		0xC6	/* DRAM remap base address reg (16b) */
+#define E752X_REMAPLIMIT	0xC8	/* DRAM remap limit address reg (16b) */
+#define E752X_REMAPOFFSET	0xCA	/* DRAM remap limit offset reg (16b) */
+
+/* E752X register addresses - device 0 function 1 */
+#define E752X_FERR_GLOBAL	0x40	/* Global first error register (32b) */
+#define E752X_NERR_GLOBAL	0x44	/* Global next error register (32b) */
+#define E752X_HI_FERR		0x50	/* Hub interface first error reg (8b) */
+#define E752X_HI_NERR		0x52	/* Hub interface next error reg (8b) */
+#define E752X_HI_ERRMASK	0x54	/* Hub interface error mask reg (8b) */
+#define E752X_HI_SMICMD		0x5A	/* Hub interface SMI command reg (8b) */
+#define E752X_SYSBUS_FERR	0x60	/* System buss first error reg (16b) */
+#define E752X_SYSBUS_NERR	0x62	/* System buss next error reg (16b) */
+#define E752X_SYSBUS_ERRMASK	0x64	/* System buss error mask reg (16b) */
+#define E752X_SYSBUS_SMICMD	0x6A	/* System buss SMI command reg (16b) */
+#define E752X_BUF_FERR		0x70	/* Memory buffer first error reg (8b) */
+#define E752X_BUF_NERR		0x72	/* Memory buffer next error reg (8b) */
+#define E752X_BUF_ERRMASK	0x74	/* Memory buffer error mask reg (8b) */
+#define E752X_BUF_SMICMD	0x7A	/* Memory buffer SMI cmd reg (8b) */
+#define E752X_DRAM_FERR		0x80	/* DRAM first error register (16b) */
+#define E752X_DRAM_NERR		0x82	/* DRAM next error register (16b) */
+#define E752X_DRAM_ERRMASK	0x84	/* DRAM error mask register (8b) */
+#define E752X_DRAM_SMICMD	0x8A	/* DRAM SMI command register (8b) */
+#define E752X_DRAM_RETR_ADD	0xAC	/* DRAM Retry address register (32b) */
+#define E752X_DRAM_SEC1_ADD	0xA0	/* DRAM first correctable memory */
+					/*     error address register (32b) */
+					/*
+					 * 31    Reserved
+					 * 30:2  CE address (64 byte block 34:6
+					 * 1     Reserved
+					 * 0     HiLoCS
+					 */
+#define E752X_DRAM_SEC2_ADD	0xC8	/* DRAM first correctable memory */
+					/*     error address register (32b) */
+					/*
+					 * 31    Reserved
+					 * 30:2  CE address (64 byte block 34:6)
+					 * 1     Reserved
+					 * 0     HiLoCS
+					 */
+#define E752X_DRAM_DED_ADD	0xA4	/* DRAM first uncorrectable memory */
+					/*     error address register (32b) */
+					/*
+					 * 31    Reserved
+					 * 30:2  CE address (64 byte block 34:6)
+					 * 1     Reserved
+					 * 0     HiLoCS
+					 */
+#define E752X_DRAM_SCRB_ADD	0xA8	/* DRAM 1st uncorrectable scrub mem */
+					/*     error address register (32b) */
+					/*
+					 * 31    Reserved
+					 * 30:2  CE address (64 byte block 34:6
+					 * 1     Reserved
+					 * 0     HiLoCS
+					 */
+#define E752X_DRAM_SEC1_SYNDROME 0xC4	/* DRAM first correctable memory */
+					/*     error syndrome register (16b) */
+#define E752X_DRAM_SEC2_SYNDROME 0xC6	/* DRAM second correctable memory */
+					/*     error syndrome register (16b) */
+#define E752X_DEVPRES1		0xF4	/* Device Present 1 register (8b) */
+
+/* 3100 IMCH specific register addresses - device 0 function 1 */
+#define I3100_NSI_FERR		0x48	/* NSI first error reg (32b) */
+#define I3100_NSI_NERR		0x4C	/* NSI next error reg (32b) */
+#define I3100_NSI_SMICMD	0x54	/* NSI SMI command register (32b) */
+#define I3100_NSI_EMASK		0x90	/* NSI error mask register (32b) */
+
+/* ICH5R register addresses - device 30 function 0 */
+#define ICH5R_PCI_STAT		0x06	/* PCI status register (16b) */
+#define ICH5R_PCI_2ND_STAT	0x1E	/* PCI status secondary reg (16b) */
+#define ICH5R_PCI_BRIDGE_CTL	0x3E	/* PCI bridge control register (16b) */
+
+enum e752x_chips {
+	E7520 = 0,
+	E7525 = 1,
+	E7320 = 2,
+	I3100 = 3
+};
+
+/*
+ * Those chips Support single-rank and dual-rank memories only.
+ *
+ * On e752x chips, the odd rows are present only on dual-rank memories.
+ * Dividing the rank by two will provide the dimm#
+ *
+ * i3100 MC has a different mapping: it supports only 4 ranks.
+ *
+ * The mapping is (from 1 to n):
+ *	slot	   single-ranked	double-ranked
+ *	dimm #1 -> rank #4		NA
+ *	dimm #2 -> rank #3		NA
+ *	dimm #3 -> rank #2		Ranks 2 and 3
+ *	dimm #4 -> rank $1		Ranks 1 and 4
+ *
+ * FIXME: The current mapping for i3100 considers that it supports up to 8
+ *	  ranks/chanel, but datasheet says that the MC supports only 4 ranks.
+ */
+
+struct e752x_pvt {
+	struct pci_dev *dev_d0f0;
+	struct pci_dev *dev_d0f1;
+	u32 tolm;
+	u32 remapbase;
+	u32 remaplimit;
+	int mc_symmetric;
+	u8 map[8];
+	int map_type;
+	const struct e752x_dev_info *dev_info;
+};
+
+struct e752x_dev_info {
+	u16 err_dev;
+	u16 ctl_dev;
+	const char *ctl_name;
+};
+
+struct e752x_error_info {
+	u32 ferr_global;
+	u32 nerr_global;
+	u32 nsi_ferr;	/* 3100 only */
+	u32 nsi_nerr;	/* 3100 only */
+	u8 hi_ferr;	/* all but 3100 */
+	u8 hi_nerr;	/* all but 3100 */
+	u16 sysbus_ferr;
+	u16 sysbus_nerr;
+	u8 buf_ferr;
+	u8 buf_nerr;
+	u16 dram_ferr;
+	u16 dram_nerr;
+	u32 dram_sec1_add;
+	u32 dram_sec2_add;
+	u16 dram_sec1_syndrome;
+	u16 dram_sec2_syndrome;
+	u32 dram_ded_add;
+	u32 dram_scrb_add;
+	u32 dram_retr_add;
+};
+
+static const struct e752x_dev_info e752x_devs[] = {
+	[E7520] = {
+		.err_dev = PCI_DEVICE_ID_INTEL_7520_1_ERR,
+		.ctl_dev = PCI_DEVICE_ID_INTEL_7520_0,
+		.ctl_name = "E7520"},
+	[E7525] = {
+		.err_dev = PCI_DEVICE_ID_INTEL_7525_1_ERR,
+		.ctl_dev = PCI_DEVICE_ID_INTEL_7525_0,
+		.ctl_name = "E7525"},
+	[E7320] = {
+		.err_dev = PCI_DEVICE_ID_INTEL_7320_1_ERR,
+		.ctl_dev = PCI_DEVICE_ID_INTEL_7320_0,
+		.ctl_name = "E7320"},
+	[I3100] = {
+		.err_dev = PCI_DEVICE_ID_INTEL_3100_1_ERR,
+		.ctl_dev = PCI_DEVICE_ID_INTEL_3100_0,
+		.ctl_name = "3100"},
+};
+
+/* Valid scrub rates for the e752x/3100 hardware memory scrubber. We
+ * map the scrubbing bandwidth to a hardware register value. The 'set'
+ * operation finds the 'matching or higher value'.  Note that scrubbing
+ * on the e752x can only be enabled/disabled.  The 3100 supports
+ * a normal and fast mode.
+ */
+
+#define SDRATE_EOT 0xFFFFFFFF
+
+struct scrubrate {
+	u32 bandwidth;	/* bandwidth consumed by scrubbing in bytes/sec */
+	u16 scrubval;	/* register value for scrub rate */
+};
+
+/* Rate below assumes same performance as i3100 using PC3200 DDR2 in
+ * normal mode.  e752x bridges don't support choosing normal or fast mode,
+ * so the scrubbing bandwidth value isn't all that important - scrubbing is
+ * either on or off.
+ */
+static const struct scrubrate scrubrates_e752x[] = {
+	{0,		0x00},	/* Scrubbing Off */
+	{500000,	0x02},	/* Scrubbing On */
+	{SDRATE_EOT,	0x00}	/* End of Table */
+};
+
+/* Fast mode: 2 GByte PC3200 DDR2 scrubbed in 33s = 63161283 bytes/s
+ * Normal mode: 125 (32000 / 256) times slower than fast mode.
+ */
+static const struct scrubrate scrubrates_i3100[] = {
+	{0,		0x00},	/* Scrubbing Off */
+	{500000,	0x0a},	/* Normal mode - 32k clocks */
+	{62500000,	0x06},	/* Fast mode - 256 clocks */
+	{SDRATE_EOT,	0x00}	/* End of Table */
+};
+
+static unsigned long ctl_page_to_phys(struct mem_ctl_info *mci,
+				unsigned long page)
+{
+	u32 remap;
+	struct e752x_pvt *pvt = (struct e752x_pvt *)mci->pvt_info;
+
+	edac_dbg(3, "\n");
+
+	if (page < pvt->tolm)
+		return page;
+
+	if ((page >= 0x100000) && (page < pvt->remapbase))
+		return page;
+
+	remap = (page - pvt->tolm) + pvt->remapbase;
+
+	if (remap < pvt->remaplimit)
+		return remap;
+
+	e752x_printk(KERN_ERR, "Invalid page %lx - out of range\n", page);
+	return pvt->tolm - 1;
+}
+
+static void do_process_ce(struct mem_ctl_info *mci, u16 error_one,
+			u32 sec1_add, u16 sec1_syndrome)
+{
+	u32 page;
+	int row;
+	int channel;
+	int i;
+	struct e752x_pvt *pvt = (struct e752x_pvt *)mci->pvt_info;
+
+	edac_dbg(3, "\n");
+
+	/* convert the addr to 4k page */
+	page = sec1_add >> (PAGE_SHIFT - 4);
+
+	/* FIXME - check for -1 */
+	if (pvt->mc_symmetric) {
+		/* chip select are bits 14 & 13 */
+		row = ((page >> 1) & 3);
+		e752x_printk(KERN_WARNING,
+			"Test row %d Table %d %d %d %d %d %d %d %d\n", row,
+			pvt->map[0], pvt->map[1], pvt->map[2], pvt->map[3],
+			pvt->map[4], pvt->map[5], pvt->map[6],
+			pvt->map[7]);
+
+		/* test for channel remapping */
+		for (i = 0; i < 8; i++) {
+			if (pvt->map[i] == row)
+				break;
+		}
+
+		e752x_printk(KERN_WARNING, "Test computed row %d\n", i);
+
+		if (i < 8)
+			row = i;
+		else
+			e752x_mc_printk(mci, KERN_WARNING,
+					"row %d not found in remap table\n",
+					row);
+	} else
+		row = edac_mc_find_csrow_by_page(mci, page);
+
+	/* 0 = channel A, 1 = channel B */
+	channel = !(error_one & 1);
+
+	/* e752x mc reads 34:6 of the DRAM linear address */
+	edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+			     page, offset_in_page(sec1_add << 4), sec1_syndrome,
+			     row, channel, -1,
+			     "e752x CE", "");
+}
+
+static inline void process_ce(struct mem_ctl_info *mci, u16 error_one,
+			u32 sec1_add, u16 sec1_syndrome, int *error_found,
+			int handle_error)
+{
+	*error_found = 1;
+
+	if (handle_error)
+		do_process_ce(mci, error_one, sec1_add, sec1_syndrome);
+}
+
+static void do_process_ue(struct mem_ctl_info *mci, u16 error_one,
+			u32 ded_add, u32 scrb_add)
+{
+	u32 error_2b, block_page;
+	int row;
+	struct e752x_pvt *pvt = (struct e752x_pvt *)mci->pvt_info;
+
+	edac_dbg(3, "\n");
+
+	if (error_one & 0x0202) {
+		error_2b = ded_add;
+
+		/* convert to 4k address */
+		block_page = error_2b >> (PAGE_SHIFT - 4);
+
+		row = pvt->mc_symmetric ?
+		/* chip select are bits 14 & 13 */
+			((block_page >> 1) & 3) :
+			edac_mc_find_csrow_by_page(mci, block_page);
+
+		/* e752x mc reads 34:6 of the DRAM linear address */
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+					block_page,
+					offset_in_page(error_2b << 4), 0,
+					 row, -1, -1,
+					"e752x UE from Read", "");
+
+	}
+	if (error_one & 0x0404) {
+		error_2b = scrb_add;
+
+		/* convert to 4k address */
+		block_page = error_2b >> (PAGE_SHIFT - 4);
+
+		row = pvt->mc_symmetric ?
+		/* chip select are bits 14 & 13 */
+			((block_page >> 1) & 3) :
+			edac_mc_find_csrow_by_page(mci, block_page);
+
+		/* e752x mc reads 34:6 of the DRAM linear address */
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+					block_page,
+					offset_in_page(error_2b << 4), 0,
+					row, -1, -1,
+					"e752x UE from Scruber", "");
+	}
+}
+
+static inline void process_ue(struct mem_ctl_info *mci, u16 error_one,
+			u32 ded_add, u32 scrb_add, int *error_found,
+			int handle_error)
+{
+	*error_found = 1;
+
+	if (handle_error)
+		do_process_ue(mci, error_one, ded_add, scrb_add);
+}
+
+static inline void process_ue_no_info_wr(struct mem_ctl_info *mci,
+					 int *error_found, int handle_error)
+{
+	*error_found = 1;
+
+	if (!handle_error)
+		return;
+
+	edac_dbg(3, "\n");
+	edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
+			     -1, -1, -1,
+			     "e752x UE log memory write", "");
+}
+
+static void do_process_ded_retry(struct mem_ctl_info *mci, u16 error,
+				 u32 retry_add)
+{
+	u32 error_1b, page;
+	int row;
+	struct e752x_pvt *pvt = (struct e752x_pvt *)mci->pvt_info;
+
+	error_1b = retry_add;
+	page = error_1b >> (PAGE_SHIFT - 4);  /* convert the addr to 4k page */
+
+	/* chip select are bits 14 & 13 */
+	row = pvt->mc_symmetric ? ((page >> 1) & 3) :
+		edac_mc_find_csrow_by_page(mci, page);
+
+	e752x_mc_printk(mci, KERN_WARNING,
+			"CE page 0x%lx, row %d : Memory read retry\n",
+			(long unsigned int)page, row);
+}
+
+static inline void process_ded_retry(struct mem_ctl_info *mci, u16 error,
+				u32 retry_add, int *error_found,
+				int handle_error)
+{
+	*error_found = 1;
+
+	if (handle_error)
+		do_process_ded_retry(mci, error, retry_add);
+}
+
+static inline void process_threshold_ce(struct mem_ctl_info *mci, u16 error,
+					int *error_found, int handle_error)
+{
+	*error_found = 1;
+
+	if (handle_error)
+		e752x_mc_printk(mci, KERN_WARNING, "Memory threshold CE\n");
+}
+
+static char *global_message[11] = {
+	"PCI Express C1",
+	"PCI Express C",
+	"PCI Express B1",
+	"PCI Express B",
+	"PCI Express A1",
+	"PCI Express A",
+	"DMA Controller",
+	"HUB or NS Interface",
+	"System Bus",
+	"DRAM Controller",  /* 9th entry */
+	"Internal Buffer"
+};
+
+#define DRAM_ENTRY	9
+
+static char *fatal_message[2] = { "Non-Fatal ", "Fatal " };
+
+static void do_global_error(int fatal, u32 errors)
+{
+	int i;
+
+	for (i = 0; i < 11; i++) {
+		if (errors & (1 << i)) {
+			/* If the error is from DRAM Controller OR
+			 * we are to report ALL errors, then
+			 * report the error
+			 */
+			if ((i == DRAM_ENTRY) || report_non_memory_errors)
+				e752x_printk(KERN_WARNING, "%sError %s\n",
+					fatal_message[fatal],
+					global_message[i]);
+		}
+	}
+}
+
+static inline void global_error(int fatal, u32 errors, int *error_found,
+				int handle_error)
+{
+	*error_found = 1;
+
+	if (handle_error)
+		do_global_error(fatal, errors);
+}
+
+static char *hub_message[7] = {
+	"HI Address or Command Parity", "HI Illegal Access",
+	"HI Internal Parity", "Out of Range Access",
+	"HI Data Parity", "Enhanced Config Access",
+	"Hub Interface Target Abort"
+};
+
+static void do_hub_error(int fatal, u8 errors)
+{
+	int i;
+
+	for (i = 0; i < 7; i++) {
+		if (errors & (1 << i))
+			e752x_printk(KERN_WARNING, "%sError %s\n",
+				fatal_message[fatal], hub_message[i]);
+	}
+}
+
+static inline void hub_error(int fatal, u8 errors, int *error_found,
+			int handle_error)
+{
+	*error_found = 1;
+
+	if (handle_error)
+		do_hub_error(fatal, errors);
+}
+
+#define NSI_FATAL_MASK		0x0c080081
+#define NSI_NON_FATAL_MASK	0x23a0ba64
+#define NSI_ERR_MASK		(NSI_FATAL_MASK | NSI_NON_FATAL_MASK)
+
+static char *nsi_message[30] = {
+	"NSI Link Down",	/* NSI_FERR/NSI_NERR bit 0, fatal error */
+	"",						/* reserved */
+	"NSI Parity Error",				/* bit 2, non-fatal */
+	"",						/* reserved */
+	"",						/* reserved */
+	"Correctable Error Message",			/* bit 5, non-fatal */
+	"Non-Fatal Error Message",			/* bit 6, non-fatal */
+	"Fatal Error Message",				/* bit 7, fatal */
+	"",						/* reserved */
+	"Receiver Error",				/* bit 9, non-fatal */
+	"",						/* reserved */
+	"Bad TLP",					/* bit 11, non-fatal */
+	"Bad DLLP",					/* bit 12, non-fatal */
+	"REPLAY_NUM Rollover",				/* bit 13, non-fatal */
+	"",						/* reserved */
+	"Replay Timer Timeout",				/* bit 15, non-fatal */
+	"",						/* reserved */
+	"",						/* reserved */
+	"",						/* reserved */
+	"Data Link Protocol Error",			/* bit 19, fatal */
+	"",						/* reserved */
+	"Poisoned TLP",					/* bit 21, non-fatal */
+	"",						/* reserved */
+	"Completion Timeout",				/* bit 23, non-fatal */
+	"Completer Abort",				/* bit 24, non-fatal */
+	"Unexpected Completion",			/* bit 25, non-fatal */
+	"Receiver Overflow",				/* bit 26, fatal */
+	"Malformed TLP",				/* bit 27, fatal */
+	"",						/* reserved */
+	"Unsupported Request"				/* bit 29, non-fatal */
+};
+
+static void do_nsi_error(int fatal, u32 errors)
+{
+	int i;
+
+	for (i = 0; i < 30; i++) {
+		if (errors & (1 << i))
+			printk(KERN_WARNING "%sError %s\n",
+			       fatal_message[fatal], nsi_message[i]);
+	}
+}
+
+static inline void nsi_error(int fatal, u32 errors, int *error_found,
+		int handle_error)
+{
+	*error_found = 1;
+
+	if (handle_error)
+		do_nsi_error(fatal, errors);
+}
+
+static char *membuf_message[4] = {
+	"Internal PMWB to DRAM parity",
+	"Internal PMWB to System Bus Parity",
+	"Internal System Bus or IO to PMWB Parity",
+	"Internal DRAM to PMWB Parity"
+};
+
+static void do_membuf_error(u8 errors)
+{
+	int i;
+
+	for (i = 0; i < 4; i++) {
+		if (errors & (1 << i))
+			e752x_printk(KERN_WARNING, "Non-Fatal Error %s\n",
+				membuf_message[i]);
+	}
+}
+
+static inline void membuf_error(u8 errors, int *error_found, int handle_error)
+{
+	*error_found = 1;
+
+	if (handle_error)
+		do_membuf_error(errors);
+}
+
+static char *sysbus_message[10] = {
+	"Addr or Request Parity",
+	"Data Strobe Glitch",
+	"Addr Strobe Glitch",
+	"Data Parity",
+	"Addr Above TOM",
+	"Non DRAM Lock Error",
+	"MCERR", "BINIT",
+	"Memory Parity",
+	"IO Subsystem Parity"
+};
+
+static void do_sysbus_error(int fatal, u32 errors)
+{
+	int i;
+
+	for (i = 0; i < 10; i++) {
+		if (errors & (1 << i))
+			e752x_printk(KERN_WARNING, "%sError System Bus %s\n",
+				fatal_message[fatal], sysbus_message[i]);
+	}
+}
+
+static inline void sysbus_error(int fatal, u32 errors, int *error_found,
+				int handle_error)
+{
+	*error_found = 1;
+
+	if (handle_error)
+		do_sysbus_error(fatal, errors);
+}
+
+static void e752x_check_hub_interface(struct e752x_error_info *info,
+				int *error_found, int handle_error)
+{
+	u8 stat8;
+
+	//pci_read_config_byte(dev,E752X_HI_FERR,&stat8);
+
+	stat8 = info->hi_ferr;
+
+	if (stat8 & 0x7f) {	/* Error, so process */
+		stat8 &= 0x7f;
+
+		if (stat8 & 0x2b)
+			hub_error(1, stat8 & 0x2b, error_found, handle_error);
+
+		if (stat8 & 0x54)
+			hub_error(0, stat8 & 0x54, error_found, handle_error);
+	}
+	//pci_read_config_byte(dev,E752X_HI_NERR,&stat8);
+
+	stat8 = info->hi_nerr;
+
+	if (stat8 & 0x7f) {	/* Error, so process */
+		stat8 &= 0x7f;
+
+		if (stat8 & 0x2b)
+			hub_error(1, stat8 & 0x2b, error_found, handle_error);
+
+		if (stat8 & 0x54)
+			hub_error(0, stat8 & 0x54, error_found, handle_error);
+	}
+}
+
+static void e752x_check_ns_interface(struct e752x_error_info *info,
+				int *error_found, int handle_error)
+{
+	u32 stat32;
+
+	stat32 = info->nsi_ferr;
+	if (stat32 & NSI_ERR_MASK) { /* Error, so process */
+		if (stat32 & NSI_FATAL_MASK)	/* check for fatal errors */
+			nsi_error(1, stat32 & NSI_FATAL_MASK, error_found,
+				  handle_error);
+		if (stat32 & NSI_NON_FATAL_MASK) /* check for non-fatal ones */
+			nsi_error(0, stat32 & NSI_NON_FATAL_MASK, error_found,
+				  handle_error);
+	}
+	stat32 = info->nsi_nerr;
+	if (stat32 & NSI_ERR_MASK) {
+		if (stat32 & NSI_FATAL_MASK)
+			nsi_error(1, stat32 & NSI_FATAL_MASK, error_found,
+				  handle_error);
+		if (stat32 & NSI_NON_FATAL_MASK)
+			nsi_error(0, stat32 & NSI_NON_FATAL_MASK, error_found,
+				  handle_error);
+	}
+}
+
+static void e752x_check_sysbus(struct e752x_error_info *info,
+			int *error_found, int handle_error)
+{
+	u32 stat32, error32;
+
+	//pci_read_config_dword(dev,E752X_SYSBUS_FERR,&stat32);
+	stat32 = info->sysbus_ferr + (info->sysbus_nerr << 16);
+
+	if (stat32 == 0)
+		return;		/* no errors */
+
+	error32 = (stat32 >> 16) & 0x3ff;
+	stat32 = stat32 & 0x3ff;
+
+	if (stat32 & 0x087)
+		sysbus_error(1, stat32 & 0x087, error_found, handle_error);
+
+	if (stat32 & 0x378)
+		sysbus_error(0, stat32 & 0x378, error_found, handle_error);
+
+	if (error32 & 0x087)
+		sysbus_error(1, error32 & 0x087, error_found, handle_error);
+
+	if (error32 & 0x378)
+		sysbus_error(0, error32 & 0x378, error_found, handle_error);
+}
+
+static void e752x_check_membuf(struct e752x_error_info *info,
+			int *error_found, int handle_error)
+{
+	u8 stat8;
+
+	stat8 = info->buf_ferr;
+
+	if (stat8 & 0x0f) {	/* Error, so process */
+		stat8 &= 0x0f;
+		membuf_error(stat8, error_found, handle_error);
+	}
+
+	stat8 = info->buf_nerr;
+
+	if (stat8 & 0x0f) {	/* Error, so process */
+		stat8 &= 0x0f;
+		membuf_error(stat8, error_found, handle_error);
+	}
+}
+
+static void e752x_check_dram(struct mem_ctl_info *mci,
+			struct e752x_error_info *info, int *error_found,
+			int handle_error)
+{
+	u16 error_one, error_next;
+
+	error_one = info->dram_ferr;
+	error_next = info->dram_nerr;
+
+	/* decode and report errors */
+	if (error_one & 0x0101)	/* check first error correctable */
+		process_ce(mci, error_one, info->dram_sec1_add,
+			info->dram_sec1_syndrome, error_found, handle_error);
+
+	if (error_next & 0x0101)	/* check next error correctable */
+		process_ce(mci, error_next, info->dram_sec2_add,
+			info->dram_sec2_syndrome, error_found, handle_error);
+
+	if (error_one & 0x4040)
+		process_ue_no_info_wr(mci, error_found, handle_error);
+
+	if (error_next & 0x4040)
+		process_ue_no_info_wr(mci, error_found, handle_error);
+
+	if (error_one & 0x2020)
+		process_ded_retry(mci, error_one, info->dram_retr_add,
+				error_found, handle_error);
+
+	if (error_next & 0x2020)
+		process_ded_retry(mci, error_next, info->dram_retr_add,
+				error_found, handle_error);
+
+	if (error_one & 0x0808)
+		process_threshold_ce(mci, error_one, error_found, handle_error);
+
+	if (error_next & 0x0808)
+		process_threshold_ce(mci, error_next, error_found,
+				handle_error);
+
+	if (error_one & 0x0606)
+		process_ue(mci, error_one, info->dram_ded_add,
+			info->dram_scrb_add, error_found, handle_error);
+
+	if (error_next & 0x0606)
+		process_ue(mci, error_next, info->dram_ded_add,
+			info->dram_scrb_add, error_found, handle_error);
+}
+
+static void e752x_get_error_info(struct mem_ctl_info *mci,
+				 struct e752x_error_info *info)
+{
+	struct pci_dev *dev;
+	struct e752x_pvt *pvt;
+
+	memset(info, 0, sizeof(*info));
+	pvt = (struct e752x_pvt *)mci->pvt_info;
+	dev = pvt->dev_d0f1;
+	pci_read_config_dword(dev, E752X_FERR_GLOBAL, &info->ferr_global);
+
+	if (info->ferr_global) {
+		if (pvt->dev_info->err_dev == PCI_DEVICE_ID_INTEL_3100_1_ERR) {
+			pci_read_config_dword(dev, I3100_NSI_FERR,
+					     &info->nsi_ferr);
+			info->hi_ferr = 0;
+		} else {
+			pci_read_config_byte(dev, E752X_HI_FERR,
+					     &info->hi_ferr);
+			info->nsi_ferr = 0;
+		}
+		pci_read_config_word(dev, E752X_SYSBUS_FERR,
+				&info->sysbus_ferr);
+		pci_read_config_byte(dev, E752X_BUF_FERR, &info->buf_ferr);
+		pci_read_config_word(dev, E752X_DRAM_FERR, &info->dram_ferr);
+		pci_read_config_dword(dev, E752X_DRAM_SEC1_ADD,
+				&info->dram_sec1_add);
+		pci_read_config_word(dev, E752X_DRAM_SEC1_SYNDROME,
+				&info->dram_sec1_syndrome);
+		pci_read_config_dword(dev, E752X_DRAM_DED_ADD,
+				&info->dram_ded_add);
+		pci_read_config_dword(dev, E752X_DRAM_SCRB_ADD,
+				&info->dram_scrb_add);
+		pci_read_config_dword(dev, E752X_DRAM_RETR_ADD,
+				&info->dram_retr_add);
+
+		/* ignore the reserved bits just in case */
+		if (info->hi_ferr & 0x7f)
+			pci_write_config_byte(dev, E752X_HI_FERR,
+					info->hi_ferr);
+
+		if (info->nsi_ferr & NSI_ERR_MASK)
+			pci_write_config_dword(dev, I3100_NSI_FERR,
+					info->nsi_ferr);
+
+		if (info->sysbus_ferr)
+			pci_write_config_word(dev, E752X_SYSBUS_FERR,
+					info->sysbus_ferr);
+
+		if (info->buf_ferr & 0x0f)
+			pci_write_config_byte(dev, E752X_BUF_FERR,
+					info->buf_ferr);
+
+		if (info->dram_ferr)
+			pci_write_bits16(pvt->dev_d0f1, E752X_DRAM_FERR,
+					 info->dram_ferr, info->dram_ferr);
+
+		pci_write_config_dword(dev, E752X_FERR_GLOBAL,
+				info->ferr_global);
+	}
+
+	pci_read_config_dword(dev, E752X_NERR_GLOBAL, &info->nerr_global);
+
+	if (info->nerr_global) {
+		if (pvt->dev_info->err_dev == PCI_DEVICE_ID_INTEL_3100_1_ERR) {
+			pci_read_config_dword(dev, I3100_NSI_NERR,
+					     &info->nsi_nerr);
+			info->hi_nerr = 0;
+		} else {
+			pci_read_config_byte(dev, E752X_HI_NERR,
+					     &info->hi_nerr);
+			info->nsi_nerr = 0;
+		}
+		pci_read_config_word(dev, E752X_SYSBUS_NERR,
+				&info->sysbus_nerr);
+		pci_read_config_byte(dev, E752X_BUF_NERR, &info->buf_nerr);
+		pci_read_config_word(dev, E752X_DRAM_NERR, &info->dram_nerr);
+		pci_read_config_dword(dev, E752X_DRAM_SEC2_ADD,
+				&info->dram_sec2_add);
+		pci_read_config_word(dev, E752X_DRAM_SEC2_SYNDROME,
+				&info->dram_sec2_syndrome);
+
+		if (info->hi_nerr & 0x7f)
+			pci_write_config_byte(dev, E752X_HI_NERR,
+					info->hi_nerr);
+
+		if (info->nsi_nerr & NSI_ERR_MASK)
+			pci_write_config_dword(dev, I3100_NSI_NERR,
+					info->nsi_nerr);
+
+		if (info->sysbus_nerr)
+			pci_write_config_word(dev, E752X_SYSBUS_NERR,
+					info->sysbus_nerr);
+
+		if (info->buf_nerr & 0x0f)
+			pci_write_config_byte(dev, E752X_BUF_NERR,
+					info->buf_nerr);
+
+		if (info->dram_nerr)
+			pci_write_bits16(pvt->dev_d0f1, E752X_DRAM_NERR,
+					 info->dram_nerr, info->dram_nerr);
+
+		pci_write_config_dword(dev, E752X_NERR_GLOBAL,
+				info->nerr_global);
+	}
+}
+
+static int e752x_process_error_info(struct mem_ctl_info *mci,
+				struct e752x_error_info *info,
+				int handle_errors)
+{
+	u32 error32, stat32;
+	int error_found;
+
+	error_found = 0;
+	error32 = (info->ferr_global >> 18) & 0x3ff;
+	stat32 = (info->ferr_global >> 4) & 0x7ff;
+
+	if (error32)
+		global_error(1, error32, &error_found, handle_errors);
+
+	if (stat32)
+		global_error(0, stat32, &error_found, handle_errors);
+
+	error32 = (info->nerr_global >> 18) & 0x3ff;
+	stat32 = (info->nerr_global >> 4) & 0x7ff;
+
+	if (error32)
+		global_error(1, error32, &error_found, handle_errors);
+
+	if (stat32)
+		global_error(0, stat32, &error_found, handle_errors);
+
+	e752x_check_hub_interface(info, &error_found, handle_errors);
+	e752x_check_ns_interface(info, &error_found, handle_errors);
+	e752x_check_sysbus(info, &error_found, handle_errors);
+	e752x_check_membuf(info, &error_found, handle_errors);
+	e752x_check_dram(mci, info, &error_found, handle_errors);
+	return error_found;
+}
+
+static void e752x_check(struct mem_ctl_info *mci)
+{
+	struct e752x_error_info info;
+
+	edac_dbg(3, "\n");
+	e752x_get_error_info(mci, &info);
+	e752x_process_error_info(mci, &info, 1);
+}
+
+/* Program byte/sec bandwidth scrub rate to hardware */
+static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 new_bw)
+{
+	const struct scrubrate *scrubrates;
+	struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info;
+	struct pci_dev *pdev = pvt->dev_d0f0;
+	int i;
+
+	if (pvt->dev_info->ctl_dev == PCI_DEVICE_ID_INTEL_3100_0)
+		scrubrates = scrubrates_i3100;
+	else
+		scrubrates = scrubrates_e752x;
+
+	/* Translate the desired scrub rate to a e752x/3100 register value.
+	 * Search for the bandwidth that is equal or greater than the
+	 * desired rate and program the cooresponding register value.
+	 */
+	for (i = 0; scrubrates[i].bandwidth != SDRATE_EOT; i++)
+		if (scrubrates[i].bandwidth >= new_bw)
+			break;
+
+	if (scrubrates[i].bandwidth == SDRATE_EOT)
+		return -1;
+
+	pci_write_config_word(pdev, E752X_MCHSCRB, scrubrates[i].scrubval);
+
+	return scrubrates[i].bandwidth;
+}
+
+/* Convert current scrub rate value into byte/sec bandwidth */
+static int get_sdram_scrub_rate(struct mem_ctl_info *mci)
+{
+	const struct scrubrate *scrubrates;
+	struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info;
+	struct pci_dev *pdev = pvt->dev_d0f0;
+	u16 scrubval;
+	int i;
+
+	if (pvt->dev_info->ctl_dev == PCI_DEVICE_ID_INTEL_3100_0)
+		scrubrates = scrubrates_i3100;
+	else
+		scrubrates = scrubrates_e752x;
+
+	/* Find the bandwidth matching the memory scrubber configuration */
+	pci_read_config_word(pdev, E752X_MCHSCRB, &scrubval);
+	scrubval = scrubval & 0x0f;
+
+	for (i = 0; scrubrates[i].bandwidth != SDRATE_EOT; i++)
+		if (scrubrates[i].scrubval == scrubval)
+			break;
+
+	if (scrubrates[i].bandwidth == SDRATE_EOT) {
+		e752x_printk(KERN_WARNING,
+			"Invalid sdram scrub control value: 0x%x\n", scrubval);
+		return -1;
+	}
+	return scrubrates[i].bandwidth;
+
+}
+
+/* Return 1 if dual channel mode is active.  Else return 0. */
+static inline int dual_channel_active(u16 ddrcsr)
+{
+	return (((ddrcsr >> 12) & 3) == 3);
+}
+
+/* Remap csrow index numbers if map_type is "reverse"
+ */
+static inline int remap_csrow_index(struct mem_ctl_info *mci, int index)
+{
+	struct e752x_pvt *pvt = mci->pvt_info;
+
+	if (!pvt->map_type)
+		return (7 - index);
+
+	return (index);
+}
+
+static void e752x_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
+			u16 ddrcsr)
+{
+	struct csrow_info *csrow;
+	enum edac_type edac_mode;
+	unsigned long last_cumul_size;
+	int index, mem_dev, drc_chan;
+	int drc_drbg;		/* DRB granularity 0=64mb, 1=128mb */
+	int drc_ddim;		/* DRAM Data Integrity Mode 0=none, 2=edac */
+	u8 value;
+	u32 dra, drc, cumul_size, i, nr_pages;
+
+	dra = 0;
+	for (index = 0; index < 4; index++) {
+		u8 dra_reg;
+		pci_read_config_byte(pdev, E752X_DRA + index, &dra_reg);
+		dra |= dra_reg << (index * 8);
+	}
+	pci_read_config_dword(pdev, E752X_DRC, &drc);
+	drc_chan = dual_channel_active(ddrcsr) ? 1 : 0;
+	drc_drbg = drc_chan + 1;	/* 128 in dual mode, 64 in single */
+	drc_ddim = (drc >> 20) & 0x3;
+
+	/* The dram row boundary (DRB) reg values are boundary address for
+	 * each DRAM row with a granularity of 64 or 128MB (single/dual
+	 * channel operation).  DRB regs are cumulative; therefore DRB7 will
+	 * contain the total memory contained in all eight rows.
+	 */
+	for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
+		/* mem_dev 0=x8, 1=x4 */
+		mem_dev = (dra >> (index * 4 + 2)) & 0x3;
+		csrow = mci->csrows[remap_csrow_index(mci, index)];
+
+		mem_dev = (mem_dev == 2);
+		pci_read_config_byte(pdev, E752X_DRB + index, &value);
+		/* convert a 128 or 64 MiB DRB to a page size. */
+		cumul_size = value << (25 + drc_drbg - PAGE_SHIFT);
+		edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size);
+		if (cumul_size == last_cumul_size)
+			continue;	/* not populated */
+
+		csrow->first_page = last_cumul_size;
+		csrow->last_page = cumul_size - 1;
+		nr_pages = cumul_size - last_cumul_size;
+		last_cumul_size = cumul_size;
+
+		/*
+		* if single channel or x8 devices then SECDED
+		* if dual channel and x4 then S4ECD4ED
+		*/
+		if (drc_ddim) {
+			if (drc_chan && mem_dev) {
+				edac_mode = EDAC_S4ECD4ED;
+				mci->edac_cap |= EDAC_FLAG_S4ECD4ED;
+			} else {
+				edac_mode = EDAC_SECDED;
+				mci->edac_cap |= EDAC_FLAG_SECDED;
+			}
+		} else
+			edac_mode = EDAC_NONE;
+		for (i = 0; i < csrow->nr_channels; i++) {
+			struct dimm_info *dimm = csrow->channels[i]->dimm;
+
+			edac_dbg(3, "Initializing rank at (%i,%i)\n", index, i);
+			dimm->nr_pages = nr_pages / csrow->nr_channels;
+			dimm->grain = 1 << 12;	/* 4KiB - resolution of CELOG */
+			dimm->mtype = MEM_RDDR;	/* only one type supported */
+			dimm->dtype = mem_dev ? DEV_X4 : DEV_X8;
+			dimm->edac_mode = edac_mode;
+		}
+	}
+}
+
+static void e752x_init_mem_map_table(struct pci_dev *pdev,
+				struct e752x_pvt *pvt)
+{
+	int index;
+	u8 value, last, row;
+
+	last = 0;
+	row = 0;
+
+	for (index = 0; index < 8; index += 2) {
+		pci_read_config_byte(pdev, E752X_DRB + index, &value);
+		/* test if there is a dimm in this slot */
+		if (value == last) {
+			/* no dimm in the slot, so flag it as empty */
+			pvt->map[index] = 0xff;
+			pvt->map[index + 1] = 0xff;
+		} else {	/* there is a dimm in the slot */
+			pvt->map[index] = row;
+			row++;
+			last = value;
+			/* test the next value to see if the dimm is double
+			 * sided
+			 */
+			pci_read_config_byte(pdev, E752X_DRB + index + 1,
+					&value);
+
+			/* the dimm is single sided, so flag as empty */
+			/* this is a double sided dimm to save the next row #*/
+			pvt->map[index + 1] = (value == last) ? 0xff :	row;
+			row++;
+			last = value;
+		}
+	}
+}
+
+/* Return 0 on success or 1 on failure. */
+static int e752x_get_devs(struct pci_dev *pdev, int dev_idx,
+			struct e752x_pvt *pvt)
+{
+	pvt->dev_d0f1 = pci_get_device(PCI_VENDOR_ID_INTEL,
+				pvt->dev_info->err_dev, NULL);
+
+	if (pvt->dev_d0f1 == NULL) {
+		pvt->dev_d0f1 = pci_scan_single_device(pdev->bus,
+							PCI_DEVFN(0, 1));
+		pci_dev_get(pvt->dev_d0f1);
+	}
+
+	if (pvt->dev_d0f1 == NULL) {
+		e752x_printk(KERN_ERR, "error reporting device not found:"
+			"vendor %x device 0x%x (broken BIOS?)\n",
+			PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].err_dev);
+		return 1;
+	}
+
+	pvt->dev_d0f0 = pci_get_device(PCI_VENDOR_ID_INTEL,
+				e752x_devs[dev_idx].ctl_dev,
+				NULL);
+
+	if (pvt->dev_d0f0 == NULL)
+		goto fail;
+
+	return 0;
+
+fail:
+	pci_dev_put(pvt->dev_d0f1);
+	return 1;
+}
+
+/* Setup system bus parity mask register.
+ * Sysbus parity supported on:
+ * e7320/e7520/e7525 + Xeon
+ */
+static void e752x_init_sysbus_parity_mask(struct e752x_pvt *pvt)
+{
+	char *cpu_id = cpu_data(0).x86_model_id;
+	struct pci_dev *dev = pvt->dev_d0f1;
+	int enable = 1;
+
+	/* Allow module parameter override, else see if CPU supports parity */
+	if (sysbus_parity != -1) {
+		enable = sysbus_parity;
+	} else if (cpu_id[0] && !strstr(cpu_id, "Xeon")) {
+		e752x_printk(KERN_INFO, "System Bus Parity not "
+			     "supported by CPU, disabling\n");
+		enable = 0;
+	}
+
+	if (enable)
+		pci_write_config_word(dev, E752X_SYSBUS_ERRMASK, 0x0000);
+	else
+		pci_write_config_word(dev, E752X_SYSBUS_ERRMASK, 0x0309);
+}
+
+static void e752x_init_error_reporting_regs(struct e752x_pvt *pvt)
+{
+	struct pci_dev *dev;
+
+	dev = pvt->dev_d0f1;
+	/* Turn off error disable & SMI in case the BIOS turned it on */
+	if (pvt->dev_info->err_dev == PCI_DEVICE_ID_INTEL_3100_1_ERR) {
+		pci_write_config_dword(dev, I3100_NSI_EMASK, 0);
+		pci_write_config_dword(dev, I3100_NSI_SMICMD, 0);
+	} else {
+		pci_write_config_byte(dev, E752X_HI_ERRMASK, 0x00);
+		pci_write_config_byte(dev, E752X_HI_SMICMD, 0x00);
+	}
+
+	e752x_init_sysbus_parity_mask(pvt);
+
+	pci_write_config_word(dev, E752X_SYSBUS_SMICMD, 0x00);
+	pci_write_config_byte(dev, E752X_BUF_ERRMASK, 0x00);
+	pci_write_config_byte(dev, E752X_BUF_SMICMD, 0x00);
+	pci_write_config_byte(dev, E752X_DRAM_ERRMASK, 0x00);
+	pci_write_config_byte(dev, E752X_DRAM_SMICMD, 0x00);
+}
+
+static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
+{
+	u16 pci_data;
+	u8 stat8;
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[2];
+	struct e752x_pvt *pvt;
+	u16 ddrcsr;
+	int drc_chan;		/* Number of channels 0=1chan,1=2chan */
+	struct e752x_error_info discard;
+
+	edac_dbg(0, "mci\n");
+	edac_dbg(0, "Starting Probe1\n");
+
+	/* check to see if device 0 function 1 is enabled; if it isn't, we
+	 * assume the BIOS has reserved it for a reason and is expecting
+	 * exclusive access, we take care not to violate that assumption and
+	 * fail the probe. */
+	pci_read_config_byte(pdev, E752X_DEVPRES1, &stat8);
+	if (!force_function_unhide && !(stat8 & (1 << 5))) {
+		printk(KERN_INFO "Contact your BIOS vendor to see if the "
+			"E752x error registers can be safely un-hidden\n");
+		return -ENODEV;
+	}
+	stat8 |= (1 << 5);
+	pci_write_config_byte(pdev, E752X_DEVPRES1, stat8);
+
+	pci_read_config_word(pdev, E752X_DDRCSR, &ddrcsr);
+	/* FIXME: should check >>12 or 0xf, true for all? */
+	/* Dual channel = 1, Single channel = 0 */
+	drc_chan = dual_channel_active(ddrcsr);
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = E752X_NR_CSROWS;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = drc_chan + 1;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt));
+	if (mci == NULL)
+		return -ENOMEM;
+
+	edac_dbg(3, "init mci\n");
+	mci->mtype_cap = MEM_FLAG_RDDR;
+	/* 3100 IMCH supports SECDEC only */
+	mci->edac_ctl_cap = (dev_idx == I3100) ? EDAC_FLAG_SECDED :
+		(EDAC_FLAG_NONE | EDAC_FLAG_SECDED | EDAC_FLAG_S4ECD4ED);
+	/* FIXME - what if different memory types are in different csrows? */
+	mci->mod_name = EDAC_MOD_STR;
+	mci->pdev = &pdev->dev;
+
+	edac_dbg(3, "init pvt\n");
+	pvt = (struct e752x_pvt *)mci->pvt_info;
+	pvt->dev_info = &e752x_devs[dev_idx];
+	pvt->mc_symmetric = ((ddrcsr & 0x10) != 0);
+
+	if (e752x_get_devs(pdev, dev_idx, pvt)) {
+		edac_mc_free(mci);
+		return -ENODEV;
+	}
+
+	edac_dbg(3, "more mci init\n");
+	mci->ctl_name = pvt->dev_info->ctl_name;
+	mci->dev_name = pci_name(pdev);
+	mci->edac_check = e752x_check;
+	mci->ctl_page_to_phys = ctl_page_to_phys;
+	mci->set_sdram_scrub_rate = set_sdram_scrub_rate;
+	mci->get_sdram_scrub_rate = get_sdram_scrub_rate;
+
+	/* set the map type.  1 = normal, 0 = reversed
+	 * Must be set before e752x_init_csrows in case csrow mapping
+	 * is reversed.
+	 */
+	pci_read_config_byte(pdev, E752X_DRM, &stat8);
+	pvt->map_type = ((stat8 & 0x0f) > ((stat8 >> 4) & 0x0f));
+
+	e752x_init_csrows(mci, pdev, ddrcsr);
+	e752x_init_mem_map_table(pdev, pvt);
+
+	if (dev_idx == I3100)
+		mci->edac_cap = EDAC_FLAG_SECDED; /* the only mode supported */
+	else
+		mci->edac_cap |= EDAC_FLAG_NONE;
+	edac_dbg(3, "tolm, remapbase, remaplimit\n");
+
+	/* load the top of low memory, remap base, and remap limit vars */
+	pci_read_config_word(pdev, E752X_TOLM, &pci_data);
+	pvt->tolm = ((u32) pci_data) << 4;
+	pci_read_config_word(pdev, E752X_REMAPBASE, &pci_data);
+	pvt->remapbase = ((u32) pci_data) << 14;
+	pci_read_config_word(pdev, E752X_REMAPLIMIT, &pci_data);
+	pvt->remaplimit = ((u32) pci_data) << 14;
+	e752x_printk(KERN_INFO,
+			"tolm = %x, remapbase = %x, remaplimit = %x\n",
+			pvt->tolm, pvt->remapbase, pvt->remaplimit);
+
+	/* Here we assume that we will never see multiple instances of this
+	 * type of memory controller.  The ID is therefore hardcoded to 0.
+	 */
+	if (edac_mc_add_mc(mci)) {
+		edac_dbg(3, "failed edac_mc_add_mc()\n");
+		goto fail;
+	}
+
+	e752x_init_error_reporting_regs(pvt);
+	e752x_get_error_info(mci, &discard);	/* clear other MCH errors */
+
+	/* allocating generic PCI control info */
+	e752x_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
+	if (!e752x_pci) {
+		printk(KERN_WARNING
+			"%s(): Unable to create PCI control\n", __func__);
+		printk(KERN_WARNING
+			"%s(): PCI error report via EDAC not setup\n",
+			__func__);
+	}
+
+	/* get this far and it's successful */
+	edac_dbg(3, "success\n");
+	return 0;
+
+fail:
+	pci_dev_put(pvt->dev_d0f0);
+	pci_dev_put(pvt->dev_d0f1);
+	edac_mc_free(mci);
+
+	return -ENODEV;
+}
+
+/* returns count (>= 0), or negative on error */
+static int e752x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	edac_dbg(0, "\n");
+
+	/* wake up and enable device */
+	if (pci_enable_device(pdev) < 0)
+		return -EIO;
+
+	return e752x_probe1(pdev, ent->driver_data);
+}
+
+static void e752x_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+	struct e752x_pvt *pvt;
+
+	edac_dbg(0, "\n");
+
+	if (e752x_pci)
+		edac_pci_release_generic_ctl(e752x_pci);
+
+	if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
+		return;
+
+	pvt = (struct e752x_pvt *)mci->pvt_info;
+	pci_dev_put(pvt->dev_d0f0);
+	pci_dev_put(pvt->dev_d0f1);
+	edac_mc_free(mci);
+}
+
+static const struct pci_device_id e752x_pci_tbl[] = {
+	{
+	 PCI_VEND_DEV(INTEL, 7520_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	 E7520},
+	{
+	 PCI_VEND_DEV(INTEL, 7525_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	 E7525},
+	{
+	 PCI_VEND_DEV(INTEL, 7320_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	 E7320},
+	{
+	 PCI_VEND_DEV(INTEL, 3100_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	 I3100},
+	{
+	 0,
+	 }			/* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, e752x_pci_tbl);
+
+static struct pci_driver e752x_driver = {
+	.name = EDAC_MOD_STR,
+	.probe = e752x_init_one,
+	.remove = e752x_remove_one,
+	.id_table = e752x_pci_tbl,
+};
+
+static int __init e752x_init(void)
+{
+	int pci_rc;
+
+	edac_dbg(3, "\n");
+
+       /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+       opstate_init();
+
+	pci_rc = pci_register_driver(&e752x_driver);
+	return (pci_rc < 0) ? pci_rc : 0;
+}
+
+static void __exit e752x_exit(void)
+{
+	edac_dbg(3, "\n");
+	pci_unregister_driver(&e752x_driver);
+}
+
+module_init(e752x_init);
+module_exit(e752x_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Linux Networx (http://lnxi.com) Tom Zimmerman\n");
+MODULE_DESCRIPTION("MC support for Intel e752x/3100 memory controllers");
+
+module_param(force_function_unhide, int, 0444);
+MODULE_PARM_DESC(force_function_unhide, "if BIOS sets Dev0:Fun1 up as hidden:"
+		 " 1=force unhide and hope BIOS doesn't fight driver for "
+		"Dev0:Fun1 access");
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
+
+module_param(sysbus_parity, int, 0444);
+MODULE_PARM_DESC(sysbus_parity, "0=disable system bus parity checking,"
+		" 1=enable system bus parity checking, default=auto-detect");
+module_param(report_non_memory_errors, int, 0644);
+MODULE_PARM_DESC(report_non_memory_errors, "0=disable non-memory error "
+		"reporting, 1=enable non-memory error reporting");
diff --git a/drivers/edac/e7xxx_edac.c b/drivers/edac/e7xxx_edac.c
new file mode 100644
index 000000000..75d7ce62b
--- /dev/null
+++ b/drivers/edac/e7xxx_edac.c
@@ -0,0 +1,604 @@
+/*
+ * Intel e7xxx Memory Controller kernel module
+ * (C) 2003 Linux Networx (http://lnxi.com)
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * See "enum e7xxx_chips" below for supported chipsets
+ *
+ * Written by Thayne Harbaugh
+ * Based on work by Dan Hollis <goemon at anime dot net> and others.
+ *	http://www.anime.net/~goemon/linux-ecc/
+ *
+ * Datasheet:
+ *	http://www.intel.com/content/www/us/en/chipsets/e7501-chipset-memory-controller-hub-datasheet.html
+ *
+ * Contributors:
+ *	Eric Biederman (Linux Networx)
+ *	Tom Zimmerman (Linux Networx)
+ *	Jim Garlick (Lawrence Livermore National Labs)
+ *	Dave Peterson (Lawrence Livermore National Labs)
+ *	That One Guy (Some other place)
+ *	Wang Zhenyu (intel.com)
+ *
+ * $Id: edac_e7xxx.c,v 1.5.2.9 2005/10/05 00:43:44 dsp_llnl Exp $
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/edac.h>
+#include "edac_module.h"
+
+#define	EDAC_MOD_STR	"e7xxx_edac"
+
+#define e7xxx_printk(level, fmt, arg...) \
+	edac_printk(level, "e7xxx", fmt, ##arg)
+
+#define e7xxx_mc_printk(mci, level, fmt, arg...) \
+	edac_mc_chipset_printk(mci, level, "e7xxx", fmt, ##arg)
+
+#ifndef PCI_DEVICE_ID_INTEL_7205_0
+#define PCI_DEVICE_ID_INTEL_7205_0	0x255d
+#endif				/* PCI_DEVICE_ID_INTEL_7205_0 */
+
+#ifndef PCI_DEVICE_ID_INTEL_7205_1_ERR
+#define PCI_DEVICE_ID_INTEL_7205_1_ERR	0x2551
+#endif				/* PCI_DEVICE_ID_INTEL_7205_1_ERR */
+
+#ifndef PCI_DEVICE_ID_INTEL_7500_0
+#define PCI_DEVICE_ID_INTEL_7500_0	0x2540
+#endif				/* PCI_DEVICE_ID_INTEL_7500_0 */
+
+#ifndef PCI_DEVICE_ID_INTEL_7500_1_ERR
+#define PCI_DEVICE_ID_INTEL_7500_1_ERR	0x2541
+#endif				/* PCI_DEVICE_ID_INTEL_7500_1_ERR */
+
+#ifndef PCI_DEVICE_ID_INTEL_7501_0
+#define PCI_DEVICE_ID_INTEL_7501_0	0x254c
+#endif				/* PCI_DEVICE_ID_INTEL_7501_0 */
+
+#ifndef PCI_DEVICE_ID_INTEL_7501_1_ERR
+#define PCI_DEVICE_ID_INTEL_7501_1_ERR	0x2541
+#endif				/* PCI_DEVICE_ID_INTEL_7501_1_ERR */
+
+#ifndef PCI_DEVICE_ID_INTEL_7505_0
+#define PCI_DEVICE_ID_INTEL_7505_0	0x2550
+#endif				/* PCI_DEVICE_ID_INTEL_7505_0 */
+
+#ifndef PCI_DEVICE_ID_INTEL_7505_1_ERR
+#define PCI_DEVICE_ID_INTEL_7505_1_ERR	0x2551
+#endif				/* PCI_DEVICE_ID_INTEL_7505_1_ERR */
+
+#define E7XXX_NR_CSROWS		8	/* number of csrows */
+#define E7XXX_NR_DIMMS		8	/* 2 channels, 4 dimms/channel */
+
+/* E7XXX register addresses - device 0 function 0 */
+#define E7XXX_DRB		0x60	/* DRAM row boundary register (8b) */
+#define E7XXX_DRA		0x70	/* DRAM row attribute register (8b) */
+					/*
+					 * 31   Device width row 7 0=x8 1=x4
+					 * 27   Device width row 6
+					 * 23   Device width row 5
+					 * 19   Device width row 4
+					 * 15   Device width row 3
+					 * 11   Device width row 2
+					 *  7   Device width row 1
+					 *  3   Device width row 0
+					 */
+#define E7XXX_DRC		0x7C	/* DRAM controller mode reg (32b) */
+					/*
+					 * 22    Number channels 0=1,1=2
+					 * 19:18 DRB Granularity 32/64MB
+					 */
+#define E7XXX_TOLM		0xC4	/* DRAM top of low memory reg (16b) */
+#define E7XXX_REMAPBASE		0xC6	/* DRAM remap base address reg (16b) */
+#define E7XXX_REMAPLIMIT	0xC8	/* DRAM remap limit address reg (16b) */
+
+/* E7XXX register addresses - device 0 function 1 */
+#define E7XXX_DRAM_FERR		0x80	/* DRAM first error register (8b) */
+#define E7XXX_DRAM_NERR		0x82	/* DRAM next error register (8b) */
+#define E7XXX_DRAM_CELOG_ADD	0xA0	/* DRAM first correctable memory */
+					/*     error address register (32b) */
+					/*
+					 * 31:28 Reserved
+					 * 27:6  CE address (4k block 33:12)
+					 *  5:0  Reserved
+					 */
+#define E7XXX_DRAM_UELOG_ADD	0xB0	/* DRAM first uncorrectable memory */
+					/*     error address register (32b) */
+					/*
+					 * 31:28 Reserved
+					 * 27:6  CE address (4k block 33:12)
+					 *  5:0  Reserved
+					 */
+#define E7XXX_DRAM_CELOG_SYNDROME 0xD0	/* DRAM first correctable memory */
+					/*     error syndrome register (16b) */
+
+enum e7xxx_chips {
+	E7500 = 0,
+	E7501,
+	E7505,
+	E7205,
+};
+
+struct e7xxx_pvt {
+	struct pci_dev *bridge_ck;
+	u32 tolm;
+	u32 remapbase;
+	u32 remaplimit;
+	const struct e7xxx_dev_info *dev_info;
+};
+
+struct e7xxx_dev_info {
+	u16 err_dev;
+	const char *ctl_name;
+};
+
+struct e7xxx_error_info {
+	u8 dram_ferr;
+	u8 dram_nerr;
+	u32 dram_celog_add;
+	u16 dram_celog_syndrome;
+	u32 dram_uelog_add;
+};
+
+static struct edac_pci_ctl_info *e7xxx_pci;
+
+static const struct e7xxx_dev_info e7xxx_devs[] = {
+	[E7500] = {
+		.err_dev = PCI_DEVICE_ID_INTEL_7500_1_ERR,
+		.ctl_name = "E7500"},
+	[E7501] = {
+		.err_dev = PCI_DEVICE_ID_INTEL_7501_1_ERR,
+		.ctl_name = "E7501"},
+	[E7505] = {
+		.err_dev = PCI_DEVICE_ID_INTEL_7505_1_ERR,
+		.ctl_name = "E7505"},
+	[E7205] = {
+		.err_dev = PCI_DEVICE_ID_INTEL_7205_1_ERR,
+		.ctl_name = "E7205"},
+};
+
+/* FIXME - is this valid for both SECDED and S4ECD4ED? */
+static inline int e7xxx_find_channel(u16 syndrome)
+{
+	edac_dbg(3, "\n");
+
+	if ((syndrome & 0xff00) == 0)
+		return 0;
+
+	if ((syndrome & 0x00ff) == 0)
+		return 1;
+
+	if ((syndrome & 0xf000) == 0 || (syndrome & 0x0f00) == 0)
+		return 0;
+
+	return 1;
+}
+
+static unsigned long ctl_page_to_phys(struct mem_ctl_info *mci,
+				unsigned long page)
+{
+	u32 remap;
+	struct e7xxx_pvt *pvt = (struct e7xxx_pvt *)mci->pvt_info;
+
+	edac_dbg(3, "\n");
+
+	if ((page < pvt->tolm) ||
+		((page >= 0x100000) && (page < pvt->remapbase)))
+		return page;
+
+	remap = (page - pvt->tolm) + pvt->remapbase;
+
+	if (remap < pvt->remaplimit)
+		return remap;
+
+	e7xxx_printk(KERN_ERR, "Invalid page %lx - out of range\n", page);
+	return pvt->tolm - 1;
+}
+
+static void process_ce(struct mem_ctl_info *mci, struct e7xxx_error_info *info)
+{
+	u32 error_1b, page;
+	u16 syndrome;
+	int row;
+	int channel;
+
+	edac_dbg(3, "\n");
+	/* read the error address */
+	error_1b = info->dram_celog_add;
+	/* FIXME - should use PAGE_SHIFT */
+	page = error_1b >> 6;	/* convert the address to 4k page */
+	/* read the syndrome */
+	syndrome = info->dram_celog_syndrome;
+	/* FIXME - check for -1 */
+	row = edac_mc_find_csrow_by_page(mci, page);
+	/* convert syndrome to channel */
+	channel = e7xxx_find_channel(syndrome);
+	edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, page, 0, syndrome,
+			     row, channel, -1, "e7xxx CE", "");
+}
+
+static void process_ce_no_info(struct mem_ctl_info *mci)
+{
+	edac_dbg(3, "\n");
+	edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 0, 0, 0, -1, -1, -1,
+			     "e7xxx CE log register overflow", "");
+}
+
+static void process_ue(struct mem_ctl_info *mci, struct e7xxx_error_info *info)
+{
+	u32 error_2b, block_page;
+	int row;
+
+	edac_dbg(3, "\n");
+	/* read the error address */
+	error_2b = info->dram_uelog_add;
+	/* FIXME - should use PAGE_SHIFT */
+	block_page = error_2b >> 6;	/* convert to 4k address */
+	row = edac_mc_find_csrow_by_page(mci, block_page);
+
+	edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, block_page, 0, 0,
+			     row, -1, -1, "e7xxx UE", "");
+}
+
+static void process_ue_no_info(struct mem_ctl_info *mci)
+{
+	edac_dbg(3, "\n");
+
+	edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, -1, -1, -1,
+			     "e7xxx UE log register overflow", "");
+}
+
+static void e7xxx_get_error_info(struct mem_ctl_info *mci,
+				 struct e7xxx_error_info *info)
+{
+	struct e7xxx_pvt *pvt;
+
+	pvt = (struct e7xxx_pvt *)mci->pvt_info;
+	pci_read_config_byte(pvt->bridge_ck, E7XXX_DRAM_FERR, &info->dram_ferr);
+	pci_read_config_byte(pvt->bridge_ck, E7XXX_DRAM_NERR, &info->dram_nerr);
+
+	if ((info->dram_ferr & 1) || (info->dram_nerr & 1)) {
+		pci_read_config_dword(pvt->bridge_ck, E7XXX_DRAM_CELOG_ADD,
+				&info->dram_celog_add);
+		pci_read_config_word(pvt->bridge_ck,
+				E7XXX_DRAM_CELOG_SYNDROME,
+				&info->dram_celog_syndrome);
+	}
+
+	if ((info->dram_ferr & 2) || (info->dram_nerr & 2))
+		pci_read_config_dword(pvt->bridge_ck, E7XXX_DRAM_UELOG_ADD,
+				&info->dram_uelog_add);
+
+	if (info->dram_ferr & 3)
+		pci_write_bits8(pvt->bridge_ck, E7XXX_DRAM_FERR, 0x03, 0x03);
+
+	if (info->dram_nerr & 3)
+		pci_write_bits8(pvt->bridge_ck, E7XXX_DRAM_NERR, 0x03, 0x03);
+}
+
+static int e7xxx_process_error_info(struct mem_ctl_info *mci,
+				struct e7xxx_error_info *info,
+				int handle_errors)
+{
+	int error_found;
+
+	error_found = 0;
+
+	/* decode and report errors */
+	if (info->dram_ferr & 1) {	/* check first error correctable */
+		error_found = 1;
+
+		if (handle_errors)
+			process_ce(mci, info);
+	}
+
+	if (info->dram_ferr & 2) {	/* check first error uncorrectable */
+		error_found = 1;
+
+		if (handle_errors)
+			process_ue(mci, info);
+	}
+
+	if (info->dram_nerr & 1) {	/* check next error correctable */
+		error_found = 1;
+
+		if (handle_errors) {
+			if (info->dram_ferr & 1)
+				process_ce_no_info(mci);
+			else
+				process_ce(mci, info);
+		}
+	}
+
+	if (info->dram_nerr & 2) {	/* check next error uncorrectable */
+		error_found = 1;
+
+		if (handle_errors) {
+			if (info->dram_ferr & 2)
+				process_ue_no_info(mci);
+			else
+				process_ue(mci, info);
+		}
+	}
+
+	return error_found;
+}
+
+static void e7xxx_check(struct mem_ctl_info *mci)
+{
+	struct e7xxx_error_info info;
+
+	edac_dbg(3, "\n");
+	e7xxx_get_error_info(mci, &info);
+	e7xxx_process_error_info(mci, &info, 1);
+}
+
+/* Return 1 if dual channel mode is active.  Else return 0. */
+static inline int dual_channel_active(u32 drc, int dev_idx)
+{
+	return (dev_idx == E7501) ? ((drc >> 22) & 0x1) : 1;
+}
+
+/* Return DRB granularity (0=32mb, 1=64mb). */
+static inline int drb_granularity(u32 drc, int dev_idx)
+{
+	/* only e7501 can be single channel */
+	return (dev_idx == E7501) ? ((drc >> 18) & 0x3) : 1;
+}
+
+static void e7xxx_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
+			int dev_idx, u32 drc)
+{
+	unsigned long last_cumul_size;
+	int index, j;
+	u8 value;
+	u32 dra, cumul_size, nr_pages;
+	int drc_chan, drc_drbg, drc_ddim, mem_dev;
+	struct csrow_info *csrow;
+	struct dimm_info *dimm;
+	enum edac_type edac_mode;
+
+	pci_read_config_dword(pdev, E7XXX_DRA, &dra);
+	drc_chan = dual_channel_active(drc, dev_idx);
+	drc_drbg = drb_granularity(drc, dev_idx);
+	drc_ddim = (drc >> 20) & 0x3;
+	last_cumul_size = 0;
+
+	/* The dram row boundary (DRB) reg values are boundary address
+	 * for each DRAM row with a granularity of 32 or 64MB (single/dual
+	 * channel operation).  DRB regs are cumulative; therefore DRB7 will
+	 * contain the total memory contained in all eight rows.
+	 */
+	for (index = 0; index < mci->nr_csrows; index++) {
+		/* mem_dev 0=x8, 1=x4 */
+		mem_dev = (dra >> (index * 4 + 3)) & 0x1;
+		csrow = mci->csrows[index];
+
+		pci_read_config_byte(pdev, E7XXX_DRB + index, &value);
+		/* convert a 64 or 32 MiB DRB to a page size. */
+		cumul_size = value << (25 + drc_drbg - PAGE_SHIFT);
+		edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size);
+		if (cumul_size == last_cumul_size)
+			continue;	/* not populated */
+
+		csrow->first_page = last_cumul_size;
+		csrow->last_page = cumul_size - 1;
+		nr_pages = cumul_size - last_cumul_size;
+		last_cumul_size = cumul_size;
+
+		/*
+		* if single channel or x8 devices then SECDED
+		* if dual channel and x4 then S4ECD4ED
+		*/
+		if (drc_ddim) {
+			if (drc_chan && mem_dev) {
+				edac_mode = EDAC_S4ECD4ED;
+				mci->edac_cap |= EDAC_FLAG_S4ECD4ED;
+			} else {
+				edac_mode = EDAC_SECDED;
+				mci->edac_cap |= EDAC_FLAG_SECDED;
+			}
+		} else
+			edac_mode = EDAC_NONE;
+
+		for (j = 0; j < drc_chan + 1; j++) {
+			dimm = csrow->channels[j]->dimm;
+
+			dimm->nr_pages = nr_pages / (drc_chan + 1);
+			dimm->grain = 1 << 12;	/* 4KiB - resolution of CELOG */
+			dimm->mtype = MEM_RDDR;	/* only one type supported */
+			dimm->dtype = mem_dev ? DEV_X4 : DEV_X8;
+			dimm->edac_mode = edac_mode;
+		}
+	}
+}
+
+static int e7xxx_probe1(struct pci_dev *pdev, int dev_idx)
+{
+	u16 pci_data;
+	struct mem_ctl_info *mci = NULL;
+	struct edac_mc_layer layers[2];
+	struct e7xxx_pvt *pvt = NULL;
+	u32 drc;
+	int drc_chan;
+	struct e7xxx_error_info discard;
+
+	edac_dbg(0, "mci\n");
+
+	pci_read_config_dword(pdev, E7XXX_DRC, &drc);
+
+	drc_chan = dual_channel_active(drc, dev_idx);
+	/*
+	 * According with the datasheet, this device has a maximum of
+	 * 4 DIMMS per channel, either single-rank or dual-rank. So, the
+	 * total amount of dimms is 8 (E7XXX_NR_DIMMS).
+	 * That means that the DIMM is mapped as CSROWs, and the channel
+	 * will map the rank. So, an error to either channel should be
+	 * attributed to the same dimm.
+	 */
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = E7XXX_NR_CSROWS;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = drc_chan + 1;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt));
+	if (mci == NULL)
+		return -ENOMEM;
+
+	edac_dbg(3, "init mci\n");
+	mci->mtype_cap = MEM_FLAG_RDDR;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED |
+		EDAC_FLAG_S4ECD4ED;
+	/* FIXME - what if different memory types are in different csrows? */
+	mci->mod_name = EDAC_MOD_STR;
+	mci->pdev = &pdev->dev;
+	edac_dbg(3, "init pvt\n");
+	pvt = (struct e7xxx_pvt *)mci->pvt_info;
+	pvt->dev_info = &e7xxx_devs[dev_idx];
+	pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL,
+					pvt->dev_info->err_dev, pvt->bridge_ck);
+
+	if (!pvt->bridge_ck) {
+		e7xxx_printk(KERN_ERR, "error reporting device not found:"
+			"vendor %x device 0x%x (broken BIOS?)\n",
+			PCI_VENDOR_ID_INTEL, e7xxx_devs[dev_idx].err_dev);
+		goto fail0;
+	}
+
+	edac_dbg(3, "more mci init\n");
+	mci->ctl_name = pvt->dev_info->ctl_name;
+	mci->dev_name = pci_name(pdev);
+	mci->edac_check = e7xxx_check;
+	mci->ctl_page_to_phys = ctl_page_to_phys;
+	e7xxx_init_csrows(mci, pdev, dev_idx, drc);
+	mci->edac_cap |= EDAC_FLAG_NONE;
+	edac_dbg(3, "tolm, remapbase, remaplimit\n");
+	/* load the top of low memory, remap base, and remap limit vars */
+	pci_read_config_word(pdev, E7XXX_TOLM, &pci_data);
+	pvt->tolm = ((u32) pci_data) << 4;
+	pci_read_config_word(pdev, E7XXX_REMAPBASE, &pci_data);
+	pvt->remapbase = ((u32) pci_data) << 14;
+	pci_read_config_word(pdev, E7XXX_REMAPLIMIT, &pci_data);
+	pvt->remaplimit = ((u32) pci_data) << 14;
+	e7xxx_printk(KERN_INFO,
+		"tolm = %x, remapbase = %x, remaplimit = %x\n", pvt->tolm,
+		pvt->remapbase, pvt->remaplimit);
+
+	/* clear any pending errors, or initial state bits */
+	e7xxx_get_error_info(mci, &discard);
+
+	/* Here we assume that we will never see multiple instances of this
+	 * type of memory controller.  The ID is therefore hardcoded to 0.
+	 */
+	if (edac_mc_add_mc(mci)) {
+		edac_dbg(3, "failed edac_mc_add_mc()\n");
+		goto fail1;
+	}
+
+	/* allocating generic PCI control info */
+	e7xxx_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
+	if (!e7xxx_pci) {
+		printk(KERN_WARNING
+			"%s(): Unable to create PCI control\n",
+			__func__);
+		printk(KERN_WARNING
+			"%s(): PCI error report via EDAC not setup\n",
+			__func__);
+	}
+
+	/* get this far and it's successful */
+	edac_dbg(3, "success\n");
+	return 0;
+
+fail1:
+	pci_dev_put(pvt->bridge_ck);
+
+fail0:
+	edac_mc_free(mci);
+
+	return -ENODEV;
+}
+
+/* returns count (>= 0), or negative on error */
+static int e7xxx_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	edac_dbg(0, "\n");
+
+	/* wake up and enable device */
+	return pci_enable_device(pdev) ?
+		-EIO : e7xxx_probe1(pdev, ent->driver_data);
+}
+
+static void e7xxx_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+	struct e7xxx_pvt *pvt;
+
+	edac_dbg(0, "\n");
+
+	if (e7xxx_pci)
+		edac_pci_release_generic_ctl(e7xxx_pci);
+
+	if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
+		return;
+
+	pvt = (struct e7xxx_pvt *)mci->pvt_info;
+	pci_dev_put(pvt->bridge_ck);
+	edac_mc_free(mci);
+}
+
+static const struct pci_device_id e7xxx_pci_tbl[] = {
+	{
+	 PCI_VEND_DEV(INTEL, 7205_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	 E7205},
+	{
+	 PCI_VEND_DEV(INTEL, 7500_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	 E7500},
+	{
+	 PCI_VEND_DEV(INTEL, 7501_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	 E7501},
+	{
+	 PCI_VEND_DEV(INTEL, 7505_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	 E7505},
+	{
+	 0,
+	 }			/* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, e7xxx_pci_tbl);
+
+static struct pci_driver e7xxx_driver = {
+	.name = EDAC_MOD_STR,
+	.probe = e7xxx_init_one,
+	.remove = e7xxx_remove_one,
+	.id_table = e7xxx_pci_tbl,
+};
+
+static int __init e7xxx_init(void)
+{
+       /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+       opstate_init();
+
+	return pci_register_driver(&e7xxx_driver);
+}
+
+static void __exit e7xxx_exit(void)
+{
+	pci_unregister_driver(&e7xxx_driver);
+}
+
+module_init(e7xxx_init);
+module_exit(e7xxx_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh et al\n"
+		"Based on.work by Dan Hollis et al");
+MODULE_DESCRIPTION("MC support for Intel e7xxx memory controllers");
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
new file mode 100644
index 000000000..65cf2b935
--- /dev/null
+++ b/drivers/edac/edac_device.c
@@ -0,0 +1,645 @@
+
+/*
+ * edac_device.c
+ * (C) 2007 www.douglaskthompson.com
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Written by Doug Thompson <norsk5@xmission.com>
+ *
+ * edac_device API implementation
+ * 19 Jan 2007
+ */
+
+#include <asm/page.h>
+#include <linux/uaccess.h>
+#include <linux/ctype.h>
+#include <linux/highmem.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/sysctl.h>
+#include <linux/timer.h>
+
+#include "edac_device.h"
+#include "edac_module.h"
+
+/* lock for the list: 'edac_device_list', manipulation of this list
+ * is protected by the 'device_ctls_mutex' lock
+ */
+static DEFINE_MUTEX(device_ctls_mutex);
+static LIST_HEAD(edac_device_list);
+
+#ifdef CONFIG_EDAC_DEBUG
+static void edac_device_dump_device(struct edac_device_ctl_info *edac_dev)
+{
+	edac_dbg(3, "\tedac_dev = %p dev_idx=%d\n",
+		 edac_dev, edac_dev->dev_idx);
+	edac_dbg(4, "\tedac_dev->edac_check = %p\n", edac_dev->edac_check);
+	edac_dbg(3, "\tdev = %p\n", edac_dev->dev);
+	edac_dbg(3, "\tmod_name:ctl_name = %s:%s\n",
+		 edac_dev->mod_name, edac_dev->ctl_name);
+	edac_dbg(3, "\tpvt_info = %p\n\n", edac_dev->pvt_info);
+}
+#endif				/* CONFIG_EDAC_DEBUG */
+
+struct edac_device_ctl_info *edac_device_alloc_ctl_info(
+	unsigned sz_private,
+	char *edac_device_name, unsigned nr_instances,
+	char *edac_block_name, unsigned nr_blocks,
+	unsigned offset_value,		/* zero, 1, or other based offset */
+	struct edac_dev_sysfs_block_attribute *attrib_spec, unsigned nr_attrib,
+	int device_index)
+{
+	struct edac_device_ctl_info *dev_ctl;
+	struct edac_device_instance *dev_inst, *inst;
+	struct edac_device_block *dev_blk, *blk_p, *blk;
+	struct edac_dev_sysfs_block_attribute *dev_attrib, *attrib_p, *attrib;
+	unsigned total_size;
+	unsigned count;
+	unsigned instance, block, attr;
+	void *pvt, *p;
+	int err;
+
+	edac_dbg(4, "instances=%d blocks=%d\n", nr_instances, nr_blocks);
+
+	/* Calculate the size of memory we need to allocate AND
+	 * determine the offsets of the various item arrays
+	 * (instance,block,attrib) from the start of an  allocated structure.
+	 * We want the alignment of each item  (instance,block,attrib)
+	 * to be at least as stringent as what the compiler would
+	 * provide if we could simply hardcode everything into a single struct.
+	 */
+	p = NULL;
+	dev_ctl = edac_align_ptr(&p, sizeof(*dev_ctl), 1);
+
+	/* Calc the 'end' offset past end of ONE ctl_info structure
+	 * which will become the start of the 'instance' array
+	 */
+	dev_inst = edac_align_ptr(&p, sizeof(*dev_inst), nr_instances);
+
+	/* Calc the 'end' offset past the instance array within the ctl_info
+	 * which will become the start of the block array
+	 */
+	count = nr_instances * nr_blocks;
+	dev_blk = edac_align_ptr(&p, sizeof(*dev_blk), count);
+
+	/* Calc the 'end' offset past the dev_blk array
+	 * which will become the start of the attrib array, if any.
+	 */
+	/* calc how many nr_attrib we need */
+	if (nr_attrib > 0)
+		count *= nr_attrib;
+	dev_attrib = edac_align_ptr(&p, sizeof(*dev_attrib), count);
+
+	/* Calc the 'end' offset past the attributes array */
+	pvt = edac_align_ptr(&p, sz_private, 1);
+
+	/* 'pvt' now points to where the private data area is.
+	 * At this point 'pvt' (like dev_inst,dev_blk and dev_attrib)
+	 * is baselined at ZERO
+	 */
+	total_size = ((unsigned long)pvt) + sz_private;
+
+	/* Allocate the amount of memory for the set of control structures */
+	dev_ctl = kzalloc(total_size, GFP_KERNEL);
+	if (dev_ctl == NULL)
+		return NULL;
+
+	/* Adjust pointers so they point within the actual memory we
+	 * just allocated rather than an imaginary chunk of memory
+	 * located at address 0.
+	 * 'dev_ctl' points to REAL memory, while the others are
+	 * ZERO based and thus need to be adjusted to point within
+	 * the allocated memory.
+	 */
+	dev_inst = (struct edac_device_instance *)
+		(((char *)dev_ctl) + ((unsigned long)dev_inst));
+	dev_blk = (struct edac_device_block *)
+		(((char *)dev_ctl) + ((unsigned long)dev_blk));
+	dev_attrib = (struct edac_dev_sysfs_block_attribute *)
+		(((char *)dev_ctl) + ((unsigned long)dev_attrib));
+	pvt = sz_private ? (((char *)dev_ctl) + ((unsigned long)pvt)) : NULL;
+
+	/* Begin storing the information into the control info structure */
+	dev_ctl->dev_idx = device_index;
+	dev_ctl->nr_instances = nr_instances;
+	dev_ctl->instances = dev_inst;
+	dev_ctl->pvt_info = pvt;
+
+	/* Default logging of CEs and UEs */
+	dev_ctl->log_ce = 1;
+	dev_ctl->log_ue = 1;
+
+	/* Name of this edac device */
+	snprintf(dev_ctl->name,sizeof(dev_ctl->name),"%s",edac_device_name);
+
+	edac_dbg(4, "edac_dev=%p next after end=%p\n",
+		 dev_ctl, pvt + sz_private);
+
+	/* Initialize every Instance */
+	for (instance = 0; instance < nr_instances; instance++) {
+		inst = &dev_inst[instance];
+		inst->ctl = dev_ctl;
+		inst->nr_blocks = nr_blocks;
+		blk_p = &dev_blk[instance * nr_blocks];
+		inst->blocks = blk_p;
+
+		/* name of this instance */
+		snprintf(inst->name, sizeof(inst->name),
+			 "%s%u", edac_device_name, instance);
+
+		/* Initialize every block in each instance */
+		for (block = 0; block < nr_blocks; block++) {
+			blk = &blk_p[block];
+			blk->instance = inst;
+			snprintf(blk->name, sizeof(blk->name),
+				 "%s%d", edac_block_name, block+offset_value);
+
+			edac_dbg(4, "instance=%d inst_p=%p block=#%d block_p=%p name='%s'\n",
+				 instance, inst, block, blk, blk->name);
+
+			/* if there are NO attributes OR no attribute pointer
+			 * then continue on to next block iteration
+			 */
+			if ((nr_attrib == 0) || (attrib_spec == NULL))
+				continue;
+
+			/* setup the attribute array for this block */
+			blk->nr_attribs = nr_attrib;
+			attrib_p = &dev_attrib[block*nr_instances*nr_attrib];
+			blk->block_attributes = attrib_p;
+
+			edac_dbg(4, "THIS BLOCK_ATTRIB=%p\n",
+				 blk->block_attributes);
+
+			/* Initialize every user specified attribute in this
+			 * block with the data the caller passed in
+			 * Each block gets its own copy of pointers,
+			 * and its unique 'value'
+			 */
+			for (attr = 0; attr < nr_attrib; attr++) {
+				attrib = &attrib_p[attr];
+
+				/* populate the unique per attrib
+				 * with the code pointers and info
+				 */
+				attrib->attr = attrib_spec[attr].attr;
+				attrib->show = attrib_spec[attr].show;
+				attrib->store = attrib_spec[attr].store;
+
+				attrib->block = blk;	/* up link */
+
+				edac_dbg(4, "alloc-attrib=%p attrib_name='%s' attrib-spec=%p spec-name=%s\n",
+					 attrib, attrib->attr.name,
+					 &attrib_spec[attr],
+					 attrib_spec[attr].attr.name
+					);
+			}
+		}
+	}
+
+	/* Mark this instance as merely ALLOCATED */
+	dev_ctl->op_state = OP_ALLOC;
+
+	/*
+	 * Initialize the 'root' kobj for the edac_device controller
+	 */
+	err = edac_device_register_sysfs_main_kobj(dev_ctl);
+	if (err) {
+		kfree(dev_ctl);
+		return NULL;
+	}
+
+	/* at this point, the root kobj is valid, and in order to
+	 * 'free' the object, then the function:
+	 *	edac_device_unregister_sysfs_main_kobj() must be called
+	 * which will perform kobj unregistration and the actual free
+	 * will occur during the kobject callback operation
+	 */
+
+	return dev_ctl;
+}
+EXPORT_SYMBOL_GPL(edac_device_alloc_ctl_info);
+
+void edac_device_free_ctl_info(struct edac_device_ctl_info *ctl_info)
+{
+	edac_device_unregister_sysfs_main_kobj(ctl_info);
+}
+EXPORT_SYMBOL_GPL(edac_device_free_ctl_info);
+
+/*
+ * find_edac_device_by_dev
+ *	scans the edac_device list for a specific 'struct device *'
+ *
+ *	lock to be held prior to call:	device_ctls_mutex
+ *
+ *	Return:
+ *		pointer to control structure managing 'dev'
+ *		NULL if not found on list
+ */
+static struct edac_device_ctl_info *find_edac_device_by_dev(struct device *dev)
+{
+	struct edac_device_ctl_info *edac_dev;
+	struct list_head *item;
+
+	edac_dbg(0, "\n");
+
+	list_for_each(item, &edac_device_list) {
+		edac_dev = list_entry(item, struct edac_device_ctl_info, link);
+
+		if (edac_dev->dev == dev)
+			return edac_dev;
+	}
+
+	return NULL;
+}
+
+/*
+ * add_edac_dev_to_global_list
+ *	Before calling this function, caller must
+ *	assign a unique value to edac_dev->dev_idx.
+ *
+ *	lock to be held prior to call:	device_ctls_mutex
+ *
+ *	Return:
+ *		0 on success
+ *		1 on failure.
+ */
+static int add_edac_dev_to_global_list(struct edac_device_ctl_info *edac_dev)
+{
+	struct list_head *item, *insert_before;
+	struct edac_device_ctl_info *rover;
+
+	insert_before = &edac_device_list;
+
+	/* Determine if already on the list */
+	rover = find_edac_device_by_dev(edac_dev->dev);
+	if (unlikely(rover != NULL))
+		goto fail0;
+
+	/* Insert in ascending order by 'dev_idx', so find position */
+	list_for_each(item, &edac_device_list) {
+		rover = list_entry(item, struct edac_device_ctl_info, link);
+
+		if (rover->dev_idx >= edac_dev->dev_idx) {
+			if (unlikely(rover->dev_idx == edac_dev->dev_idx))
+				goto fail1;
+
+			insert_before = item;
+			break;
+		}
+	}
+
+	list_add_tail_rcu(&edac_dev->link, insert_before);
+	return 0;
+
+fail0:
+	edac_printk(KERN_WARNING, EDAC_MC,
+			"%s (%s) %s %s already assigned %d\n",
+			dev_name(rover->dev), edac_dev_name(rover),
+			rover->mod_name, rover->ctl_name, rover->dev_idx);
+	return 1;
+
+fail1:
+	edac_printk(KERN_WARNING, EDAC_MC,
+			"bug in low-level driver: attempt to assign\n"
+			"    duplicate dev_idx %d in %s()\n", rover->dev_idx,
+			__func__);
+	return 1;
+}
+
+/*
+ * del_edac_device_from_global_list
+ */
+static void del_edac_device_from_global_list(struct edac_device_ctl_info
+						*edac_device)
+{
+	list_del_rcu(&edac_device->link);
+
+	/* these are for safe removal of devices from global list while
+	 * NMI handlers may be traversing list
+	 */
+	synchronize_rcu();
+	INIT_LIST_HEAD(&edac_device->link);
+}
+
+/*
+ * edac_device_workq_function
+ *	performs the operation scheduled by a workq request
+ *
+ *	this workq is embedded within an edac_device_ctl_info
+ *	structure, that needs to be polled for possible error events.
+ *
+ *	This operation is to acquire the list mutex lock
+ *	(thus preventing insertation or deletion)
+ *	and then call the device's poll function IFF this device is
+ *	running polled and there is a poll function defined.
+ */
+static void edac_device_workq_function(struct work_struct *work_req)
+{
+	struct delayed_work *d_work = to_delayed_work(work_req);
+	struct edac_device_ctl_info *edac_dev = to_edac_device_ctl_work(d_work);
+
+	mutex_lock(&device_ctls_mutex);
+
+	/* If we are being removed, bail out immediately */
+	if (edac_dev->op_state == OP_OFFLINE) {
+		mutex_unlock(&device_ctls_mutex);
+		return;
+	}
+
+	/* Only poll controllers that are running polled and have a check */
+	if ((edac_dev->op_state == OP_RUNNING_POLL) &&
+		(edac_dev->edac_check != NULL)) {
+			edac_dev->edac_check(edac_dev);
+	}
+
+	mutex_unlock(&device_ctls_mutex);
+
+	/* Reschedule the workq for the next time period to start again
+	 * if the number of msec is for 1 sec, then adjust to the next
+	 * whole one second to save timers firing all over the period
+	 * between integral seconds
+	 */
+	if (edac_dev->poll_msec == 1000)
+		edac_queue_work(&edac_dev->work, round_jiffies_relative(edac_dev->delay));
+	else
+		edac_queue_work(&edac_dev->work, edac_dev->delay);
+}
+
+/*
+ * edac_device_workq_setup
+ *	initialize a workq item for this edac_device instance
+ *	passing in the new delay period in msec
+ */
+static void edac_device_workq_setup(struct edac_device_ctl_info *edac_dev,
+				    unsigned msec)
+{
+	edac_dbg(0, "\n");
+
+	/* take the arg 'msec' and set it into the control structure
+	 * to used in the time period calculation
+	 * then calc the number of jiffies that represents
+	 */
+	edac_dev->poll_msec = msec;
+	edac_dev->delay = msecs_to_jiffies(msec);
+
+	INIT_DELAYED_WORK(&edac_dev->work, edac_device_workq_function);
+
+	/* optimize here for the 1 second case, which will be normal value, to
+	 * fire ON the 1 second time event. This helps reduce all sorts of
+	 * timers firing on sub-second basis, while they are happy
+	 * to fire together on the 1 second exactly
+	 */
+	if (edac_dev->poll_msec == 1000)
+		edac_queue_work(&edac_dev->work, round_jiffies_relative(edac_dev->delay));
+	else
+		edac_queue_work(&edac_dev->work, edac_dev->delay);
+}
+
+/*
+ * edac_device_workq_teardown
+ *	stop the workq processing on this edac_dev
+ */
+static void edac_device_workq_teardown(struct edac_device_ctl_info *edac_dev)
+{
+	if (!edac_dev->edac_check)
+		return;
+
+	edac_dev->op_state = OP_OFFLINE;
+
+	edac_stop_work(&edac_dev->work);
+}
+
+/*
+ * edac_device_reset_delay_period
+ *
+ *	need to stop any outstanding workq queued up at this time
+ *	because we will be resetting the sleep time.
+ *	Then restart the workq on the new delay
+ */
+void edac_device_reset_delay_period(struct edac_device_ctl_info *edac_dev,
+					unsigned long value)
+{
+	unsigned long jiffs = msecs_to_jiffies(value);
+
+	if (value == 1000)
+		jiffs = round_jiffies_relative(value);
+
+	edac_dev->poll_msec = value;
+	edac_dev->delay	    = jiffs;
+
+	edac_mod_work(&edac_dev->work, jiffs);
+}
+
+int edac_device_alloc_index(void)
+{
+	static atomic_t device_indexes = ATOMIC_INIT(0);
+
+	return atomic_inc_return(&device_indexes) - 1;
+}
+EXPORT_SYMBOL_GPL(edac_device_alloc_index);
+
+int edac_device_add_device(struct edac_device_ctl_info *edac_dev)
+{
+	edac_dbg(0, "\n");
+
+#ifdef CONFIG_EDAC_DEBUG
+	if (edac_debug_level >= 3)
+		edac_device_dump_device(edac_dev);
+#endif
+	mutex_lock(&device_ctls_mutex);
+
+	if (add_edac_dev_to_global_list(edac_dev))
+		goto fail0;
+
+	/* set load time so that error rate can be tracked */
+	edac_dev->start_time = jiffies;
+
+	/* create this instance's sysfs entries */
+	if (edac_device_create_sysfs(edac_dev)) {
+		edac_device_printk(edac_dev, KERN_WARNING,
+					"failed to create sysfs device\n");
+		goto fail1;
+	}
+
+	/* If there IS a check routine, then we are running POLLED */
+	if (edac_dev->edac_check != NULL) {
+		/* This instance is NOW RUNNING */
+		edac_dev->op_state = OP_RUNNING_POLL;
+
+		/*
+		 * enable workq processing on this instance,
+		 * default = 1000 msec
+		 */
+		edac_device_workq_setup(edac_dev, 1000);
+	} else {
+		edac_dev->op_state = OP_RUNNING_INTERRUPT;
+	}
+
+	/* Report action taken */
+	edac_device_printk(edac_dev, KERN_INFO,
+		"Giving out device to module %s controller %s: DEV %s (%s)\n",
+		edac_dev->mod_name, edac_dev->ctl_name, edac_dev->dev_name,
+		edac_op_state_to_string(edac_dev->op_state));
+
+	mutex_unlock(&device_ctls_mutex);
+	return 0;
+
+fail1:
+	/* Some error, so remove the entry from the lsit */
+	del_edac_device_from_global_list(edac_dev);
+
+fail0:
+	mutex_unlock(&device_ctls_mutex);
+	return 1;
+}
+EXPORT_SYMBOL_GPL(edac_device_add_device);
+
+struct edac_device_ctl_info *edac_device_del_device(struct device *dev)
+{
+	struct edac_device_ctl_info *edac_dev;
+
+	edac_dbg(0, "\n");
+
+	mutex_lock(&device_ctls_mutex);
+
+	/* Find the structure on the list, if not there, then leave */
+	edac_dev = find_edac_device_by_dev(dev);
+	if (edac_dev == NULL) {
+		mutex_unlock(&device_ctls_mutex);
+		return NULL;
+	}
+
+	/* mark this instance as OFFLINE */
+	edac_dev->op_state = OP_OFFLINE;
+
+	/* deregister from global list */
+	del_edac_device_from_global_list(edac_dev);
+
+	mutex_unlock(&device_ctls_mutex);
+
+	/* clear workq processing on this instance */
+	edac_device_workq_teardown(edac_dev);
+
+	/* Tear down the sysfs entries for this instance */
+	edac_device_remove_sysfs(edac_dev);
+
+	edac_printk(KERN_INFO, EDAC_MC,
+		"Removed device %d for %s %s: DEV %s\n",
+		edac_dev->dev_idx,
+		edac_dev->mod_name, edac_dev->ctl_name, edac_dev_name(edac_dev));
+
+	return edac_dev;
+}
+EXPORT_SYMBOL_GPL(edac_device_del_device);
+
+static inline int edac_device_get_log_ce(struct edac_device_ctl_info *edac_dev)
+{
+	return edac_dev->log_ce;
+}
+
+static inline int edac_device_get_log_ue(struct edac_device_ctl_info *edac_dev)
+{
+	return edac_dev->log_ue;
+}
+
+static inline int edac_device_get_panic_on_ue(struct edac_device_ctl_info
+					*edac_dev)
+{
+	return edac_dev->panic_on_ue;
+}
+
+void edac_device_handle_ce(struct edac_device_ctl_info *edac_dev,
+			int inst_nr, int block_nr, const char *msg)
+{
+	struct edac_device_instance *instance;
+	struct edac_device_block *block = NULL;
+
+	if ((inst_nr >= edac_dev->nr_instances) || (inst_nr < 0)) {
+		edac_device_printk(edac_dev, KERN_ERR,
+				"INTERNAL ERROR: 'instance' out of range "
+				"(%d >= %d)\n", inst_nr,
+				edac_dev->nr_instances);
+		return;
+	}
+
+	instance = edac_dev->instances + inst_nr;
+
+	if ((block_nr >= instance->nr_blocks) || (block_nr < 0)) {
+		edac_device_printk(edac_dev, KERN_ERR,
+				"INTERNAL ERROR: instance %d 'block' "
+				"out of range (%d >= %d)\n",
+				inst_nr, block_nr,
+				instance->nr_blocks);
+		return;
+	}
+
+	if (instance->nr_blocks > 0) {
+		block = instance->blocks + block_nr;
+		block->counters.ce_count++;
+	}
+
+	/* Propagate the count up the 'totals' tree */
+	instance->counters.ce_count++;
+	edac_dev->counters.ce_count++;
+
+	if (edac_device_get_log_ce(edac_dev))
+		edac_device_printk(edac_dev, KERN_WARNING,
+				"CE: %s instance: %s block: %s '%s'\n",
+				edac_dev->ctl_name, instance->name,
+				block ? block->name : "N/A", msg);
+}
+EXPORT_SYMBOL_GPL(edac_device_handle_ce);
+
+void edac_device_handle_ue(struct edac_device_ctl_info *edac_dev,
+			int inst_nr, int block_nr, const char *msg)
+{
+	struct edac_device_instance *instance;
+	struct edac_device_block *block = NULL;
+
+	if ((inst_nr >= edac_dev->nr_instances) || (inst_nr < 0)) {
+		edac_device_printk(edac_dev, KERN_ERR,
+				"INTERNAL ERROR: 'instance' out of range "
+				"(%d >= %d)\n", inst_nr,
+				edac_dev->nr_instances);
+		return;
+	}
+
+	instance = edac_dev->instances + inst_nr;
+
+	if ((block_nr >= instance->nr_blocks) || (block_nr < 0)) {
+		edac_device_printk(edac_dev, KERN_ERR,
+				"INTERNAL ERROR: instance %d 'block' "
+				"out of range (%d >= %d)\n",
+				inst_nr, block_nr,
+				instance->nr_blocks);
+		return;
+	}
+
+	if (instance->nr_blocks > 0) {
+		block = instance->blocks + block_nr;
+		block->counters.ue_count++;
+	}
+
+	/* Propagate the count up the 'totals' tree */
+	instance->counters.ue_count++;
+	edac_dev->counters.ue_count++;
+
+	if (edac_device_get_log_ue(edac_dev))
+		edac_device_printk(edac_dev, KERN_EMERG,
+				"UE: %s instance: %s block: %s '%s'\n",
+				edac_dev->ctl_name, instance->name,
+				block ? block->name : "N/A", msg);
+
+	if (edac_device_get_panic_on_ue(edac_dev))
+		panic("EDAC %s: UE instance: %s block %s '%s'\n",
+			edac_dev->ctl_name, instance->name,
+			block ? block->name : "N/A", msg);
+}
+EXPORT_SYMBOL_GPL(edac_device_handle_ue);
diff --git a/drivers/edac/edac_device.h b/drivers/edac/edac_device.h
new file mode 100644
index 000000000..1aaba74ae
--- /dev/null
+++ b/drivers/edac/edac_device.h
@@ -0,0 +1,320 @@
+/*
+ * Defines, structures, APIs for edac_device
+ *
+ * (C) 2007 Linux Networx (http://lnxi.com)
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Written by Thayne Harbaugh
+ * Based on work by Dan Hollis <goemon at anime dot net> and others.
+ *	http://www.anime.net/~goemon/linux-ecc/
+ *
+ * NMI handling support added by
+ *     Dave Peterson <dsp@llnl.gov> <dave_peterson@pobox.com>
+ *
+ * Refactored for multi-source files:
+ *	Doug Thompson <norsk5@xmission.com>
+ *
+ * Please look at Documentation/driver-api/edac.rst for more info about
+ * EDAC core structs and functions.
+ */
+
+#ifndef _EDAC_DEVICE_H_
+#define _EDAC_DEVICE_H_
+
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/edac.h>
+#include <linux/kobject.h>
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/sysfs.h>
+#include <linux/workqueue.h>
+
+
+/*
+ * The following are the structures to provide for a generic
+ * or abstract 'edac_device'. This set of structures and the
+ * code that implements the APIs for the same, provide for
+ * registering EDAC type devices which are NOT standard memory.
+ *
+ * CPU caches (L1 and L2)
+ * DMA engines
+ * Core CPU switches
+ * Fabric switch units
+ * PCIe interface controllers
+ * other EDAC/ECC type devices that can be monitored for
+ * errors, etc.
+ *
+ * It allows for a 2 level set of hierarchy. For example:
+ *
+ * cache could be composed of L1, L2 and L3 levels of cache.
+ * Each CPU core would have its own L1 cache, while sharing
+ * L2 and maybe L3 caches.
+ *
+ * View them arranged, via the sysfs presentation:
+ * /sys/devices/system/edac/..
+ *
+ *	mc/		<existing memory device directory>
+ *	cpu/cpu0/..	<L1 and L2 block directory>
+ *		/L1-cache/ce_count
+ *			 /ue_count
+ *		/L2-cache/ce_count
+ *			 /ue_count
+ *	cpu/cpu1/..	<L1 and L2 block directory>
+ *		/L1-cache/ce_count
+ *			 /ue_count
+ *		/L2-cache/ce_count
+ *			 /ue_count
+ *	...
+ *
+ *	the L1 and L2 directories would be "edac_device_block's"
+ */
+
+struct edac_device_counter {
+	u32 ue_count;
+	u32 ce_count;
+};
+
+/* forward reference */
+struct edac_device_ctl_info;
+struct edac_device_block;
+
+/* edac_dev_sysfs_attribute structure
+ *	used for driver sysfs attributes in mem_ctl_info
+ *	for extra controls and attributes:
+ *		like high level error Injection controls
+ */
+struct edac_dev_sysfs_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct edac_device_ctl_info *, char *);
+	ssize_t (*store)(struct edac_device_ctl_info *, const char *, size_t);
+};
+
+/* edac_dev_sysfs_block_attribute structure
+ *
+ *	used in leaf 'block' nodes for adding controls/attributes
+ *
+ *	each block in each instance of the containing control structure
+ *	can have an array of the following. The show and store functions
+ *	will be filled in with the show/store function in the
+ *	low level driver.
+ *
+ *	The 'value' field will be the actual value field used for
+ *	counting
+ */
+struct edac_dev_sysfs_block_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct kobject *, struct attribute *, char *);
+	ssize_t (*store)(struct kobject *, struct attribute *,
+			const char *, size_t);
+	struct edac_device_block *block;
+
+	unsigned int value;
+};
+
+/* device block control structure */
+struct edac_device_block {
+	struct edac_device_instance *instance;	/* Up Pointer */
+	char name[EDAC_DEVICE_NAME_LEN + 1];
+
+	struct edac_device_counter counters;	/* basic UE and CE counters */
+
+	int nr_attribs;		/* how many attributes */
+
+	/* this block's attributes, could be NULL */
+	struct edac_dev_sysfs_block_attribute *block_attributes;
+
+	/* edac sysfs device control */
+	struct kobject kobj;
+};
+
+/* device instance control structure */
+struct edac_device_instance {
+	struct edac_device_ctl_info *ctl;	/* Up pointer */
+	char name[EDAC_DEVICE_NAME_LEN + 4];
+
+	struct edac_device_counter counters;	/* instance counters */
+
+	u32 nr_blocks;		/* how many blocks */
+	struct edac_device_block *blocks;	/* block array */
+
+	/* edac sysfs device control */
+	struct kobject kobj;
+};
+
+
+/*
+ * Abstract edac_device control info structure
+ *
+ */
+struct edac_device_ctl_info {
+	/* for global list of edac_device_ctl_info structs */
+	struct list_head link;
+
+	struct module *owner;	/* Module owner of this control struct */
+
+	int dev_idx;
+
+	/* Per instance controls for this edac_device */
+	int log_ue;		/* boolean for logging UEs */
+	int log_ce;		/* boolean for logging CEs */
+	int panic_on_ue;	/* boolean for panic'ing on an UE */
+	unsigned poll_msec;	/* number of milliseconds to poll interval */
+	unsigned long delay;	/* number of jiffies for poll_msec */
+
+	/* Additional top controller level attributes, but specified
+	 * by the low level driver.
+	 *
+	 * Set by the low level driver to provide attributes at the
+	 * controller level, same level as 'ue_count' and 'ce_count' above.
+	 * An array of structures, NULL terminated
+	 *
+	 * If attributes are desired, then set to array of attributes
+	 * If no attributes are desired, leave NULL
+	 */
+	struct edac_dev_sysfs_attribute *sysfs_attributes;
+
+	/* pointer to main 'edac' subsys in sysfs */
+	struct bus_type *edac_subsys;
+
+	/* the internal state of this controller instance */
+	int op_state;
+	/* work struct for this instance */
+	struct delayed_work work;
+
+	/* pointer to edac polling checking routine:
+	 *      If NOT NULL: points to polling check routine
+	 *      If NULL: Then assumes INTERRUPT operation, where
+	 *              MC driver will receive events
+	 */
+	void (*edac_check) (struct edac_device_ctl_info * edac_dev);
+
+	struct device *dev;	/* pointer to device structure */
+
+	const char *mod_name;	/* module name */
+	const char *ctl_name;	/* edac controller  name */
+	const char *dev_name;	/* pci/platform/etc... name */
+
+	void *pvt_info;		/* pointer to 'private driver' info */
+
+	unsigned long start_time;	/* edac_device load start time (jiffies) */
+
+	struct completion removal_complete;
+
+	/* sysfs top name under 'edac' directory
+	 * and instance name:
+	 *      cpu/cpu0/...
+	 *      cpu/cpu1/...
+	 *      cpu/cpu2/...
+	 *      ...
+	 */
+	char name[EDAC_DEVICE_NAME_LEN + 1];
+
+	/* Number of instances supported on this control structure
+	 * and the array of those instances
+	 */
+	u32 nr_instances;
+	struct edac_device_instance *instances;
+
+	/* Event counters for the this whole EDAC Device */
+	struct edac_device_counter counters;
+
+	/* edac sysfs device control for the 'name'
+	 * device this structure controls
+	 */
+	struct kobject kobj;
+};
+
+/* To get from the instance's wq to the beginning of the ctl structure */
+#define to_edac_mem_ctl_work(w) \
+		container_of(w, struct mem_ctl_info, work)
+
+#define to_edac_device_ctl_work(w) \
+		container_of(w,struct edac_device_ctl_info,work)
+
+/*
+ * The alloc() and free() functions for the 'edac_device' control info
+ * structure. A MC driver will allocate one of these for each edac_device
+ * it is going to control/register with the EDAC CORE.
+ */
+extern struct edac_device_ctl_info *edac_device_alloc_ctl_info(
+		unsigned sizeof_private,
+		char *edac_device_name, unsigned nr_instances,
+		char *edac_block_name, unsigned nr_blocks,
+		unsigned offset_value,
+		struct edac_dev_sysfs_block_attribute *block_attributes,
+		unsigned nr_attribs,
+		int device_index);
+
+/* The offset value can be:
+ *	-1 indicating no offset value
+ *	0 for zero-based block numbers
+ *	1 for 1-based block number
+ *	other for other-based block number
+ */
+#define	BLOCK_OFFSET_VALUE_OFF	((unsigned) -1)
+
+extern void edac_device_free_ctl_info(struct edac_device_ctl_info *ctl_info);
+
+/**
+ * edac_device_add_device: Insert the 'edac_dev' structure into the
+ *	 edac_device global list and create sysfs entries associated with
+ *	 edac_device structure.
+ *
+ * @edac_dev: pointer to edac_device structure to be added to the list
+ *	'edac_device' structure.
+ *
+ * Returns:
+ *	0 on Success, or an error code on failure
+ */
+extern int edac_device_add_device(struct edac_device_ctl_info *edac_dev);
+
+/**
+ * edac_device_del_device:
+ *	Remove sysfs entries for specified edac_device structure and
+ *	then remove edac_device structure from global list
+ *
+ * @dev:
+ *	Pointer to struct &device representing the edac device
+ *	structure to remove.
+ *
+ * Returns:
+ *	Pointer to removed edac_device structure,
+ *	or %NULL if device not found.
+ */
+extern struct edac_device_ctl_info *edac_device_del_device(struct device *dev);
+
+/**
+ * edac_device_handle_ue():
+ *	perform a common output and handling of an 'edac_dev' UE event
+ *
+ * @edac_dev: pointer to struct &edac_device_ctl_info
+ * @inst_nr: number of the instance where the UE error happened
+ * @block_nr: number of the block where the UE error happened
+ * @msg: message to be printed
+ */
+extern void edac_device_handle_ue(struct edac_device_ctl_info *edac_dev,
+				int inst_nr, int block_nr, const char *msg);
+/**
+ * edac_device_handle_ce():
+ *	perform a common output and handling of an 'edac_dev' CE event
+ *
+ * @edac_dev: pointer to struct &edac_device_ctl_info
+ * @inst_nr: number of the instance where the CE error happened
+ * @block_nr: number of the block where the CE error happened
+ * @msg: message to be printed
+ */
+extern void edac_device_handle_ce(struct edac_device_ctl_info *edac_dev,
+				int inst_nr, int block_nr, const char *msg);
+
+/**
+ * edac_device_alloc_index: Allocate a unique device index number
+ *
+ * Returns:
+ *	allocated index number
+ */
+extern int edac_device_alloc_index(void);
+extern const char *edac_layer_name[];
+
+#endif
diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c
new file mode 100644
index 000000000..5e7593753
--- /dev/null
+++ b/drivers/edac/edac_device_sysfs.c
@@ -0,0 +1,871 @@
+/*
+ * file for managing the edac_device subsystem of devices for EDAC
+ *
+ * (C) 2007 SoftwareBitMaker
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Written Doug Thompson <norsk5@xmission.com>
+ *
+ */
+
+#include <linux/ctype.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/edac.h>
+
+#include "edac_device.h"
+#include "edac_module.h"
+
+#define EDAC_DEVICE_SYMLINK	"device"
+
+#define to_edacdev(k) container_of(k, struct edac_device_ctl_info, kobj)
+#define to_edacdev_attr(a) container_of(a, struct edacdev_attribute, attr)
+
+
+/*
+ * Set of edac_device_ctl_info attribute store/show functions
+ */
+
+/* 'log_ue' */
+static ssize_t edac_device_ctl_log_ue_show(struct edac_device_ctl_info
+					*ctl_info, char *data)
+{
+	return sprintf(data, "%u\n", ctl_info->log_ue);
+}
+
+static ssize_t edac_device_ctl_log_ue_store(struct edac_device_ctl_info
+					*ctl_info, const char *data,
+					size_t count)
+{
+	/* if parameter is zero, turn off flag, if non-zero turn on flag */
+	ctl_info->log_ue = (simple_strtoul(data, NULL, 0) != 0);
+
+	return count;
+}
+
+/* 'log_ce' */
+static ssize_t edac_device_ctl_log_ce_show(struct edac_device_ctl_info
+					*ctl_info, char *data)
+{
+	return sprintf(data, "%u\n", ctl_info->log_ce);
+}
+
+static ssize_t edac_device_ctl_log_ce_store(struct edac_device_ctl_info
+					*ctl_info, const char *data,
+					size_t count)
+{
+	/* if parameter is zero, turn off flag, if non-zero turn on flag */
+	ctl_info->log_ce = (simple_strtoul(data, NULL, 0) != 0);
+
+	return count;
+}
+
+/* 'panic_on_ue' */
+static ssize_t edac_device_ctl_panic_on_ue_show(struct edac_device_ctl_info
+						*ctl_info, char *data)
+{
+	return sprintf(data, "%u\n", ctl_info->panic_on_ue);
+}
+
+static ssize_t edac_device_ctl_panic_on_ue_store(struct edac_device_ctl_info
+						 *ctl_info, const char *data,
+						 size_t count)
+{
+	/* if parameter is zero, turn off flag, if non-zero turn on flag */
+	ctl_info->panic_on_ue = (simple_strtoul(data, NULL, 0) != 0);
+
+	return count;
+}
+
+/* 'poll_msec' show and store functions*/
+static ssize_t edac_device_ctl_poll_msec_show(struct edac_device_ctl_info
+					*ctl_info, char *data)
+{
+	return sprintf(data, "%u\n", ctl_info->poll_msec);
+}
+
+static ssize_t edac_device_ctl_poll_msec_store(struct edac_device_ctl_info
+					*ctl_info, const char *data,
+					size_t count)
+{
+	unsigned long value;
+
+	/* get the value and enforce that it is non-zero, must be at least
+	 * one millisecond for the delay period, between scans
+	 * Then cancel last outstanding delay for the work request
+	 * and set a new one.
+	 */
+	value = simple_strtoul(data, NULL, 0);
+	edac_device_reset_delay_period(ctl_info, value);
+
+	return count;
+}
+
+/* edac_device_ctl_info specific attribute structure */
+struct ctl_info_attribute {
+	struct attribute attr;
+	ssize_t(*show) (struct edac_device_ctl_info *, char *);
+	ssize_t(*store) (struct edac_device_ctl_info *, const char *, size_t);
+};
+
+#define to_ctl_info(k) container_of(k, struct edac_device_ctl_info, kobj)
+#define to_ctl_info_attr(a) container_of(a,struct ctl_info_attribute,attr)
+
+/* Function to 'show' fields from the edac_dev 'ctl_info' structure */
+static ssize_t edac_dev_ctl_info_show(struct kobject *kobj,
+				struct attribute *attr, char *buffer)
+{
+	struct edac_device_ctl_info *edac_dev = to_ctl_info(kobj);
+	struct ctl_info_attribute *ctl_info_attr = to_ctl_info_attr(attr);
+
+	if (ctl_info_attr->show)
+		return ctl_info_attr->show(edac_dev, buffer);
+	return -EIO;
+}
+
+/* Function to 'store' fields into the edac_dev 'ctl_info' structure */
+static ssize_t edac_dev_ctl_info_store(struct kobject *kobj,
+				struct attribute *attr,
+				const char *buffer, size_t count)
+{
+	struct edac_device_ctl_info *edac_dev = to_ctl_info(kobj);
+	struct ctl_info_attribute *ctl_info_attr = to_ctl_info_attr(attr);
+
+	if (ctl_info_attr->store)
+		return ctl_info_attr->store(edac_dev, buffer, count);
+	return -EIO;
+}
+
+/* edac_dev file operations for an 'ctl_info' */
+static const struct sysfs_ops device_ctl_info_ops = {
+	.show = edac_dev_ctl_info_show,
+	.store = edac_dev_ctl_info_store
+};
+
+#define CTL_INFO_ATTR(_name,_mode,_show,_store)        \
+static struct ctl_info_attribute attr_ctl_info_##_name = {      \
+	.attr = {.name = __stringify(_name), .mode = _mode },   \
+	.show   = _show,                                        \
+	.store  = _store,                                       \
+};
+
+/* Declare the various ctl_info attributes here and their respective ops */
+CTL_INFO_ATTR(log_ue, S_IRUGO | S_IWUSR,
+	edac_device_ctl_log_ue_show, edac_device_ctl_log_ue_store);
+CTL_INFO_ATTR(log_ce, S_IRUGO | S_IWUSR,
+	edac_device_ctl_log_ce_show, edac_device_ctl_log_ce_store);
+CTL_INFO_ATTR(panic_on_ue, S_IRUGO | S_IWUSR,
+	edac_device_ctl_panic_on_ue_show,
+	edac_device_ctl_panic_on_ue_store);
+CTL_INFO_ATTR(poll_msec, S_IRUGO | S_IWUSR,
+	edac_device_ctl_poll_msec_show, edac_device_ctl_poll_msec_store);
+
+/* Base Attributes of the EDAC_DEVICE ECC object */
+static struct ctl_info_attribute *device_ctrl_attr[] = {
+	&attr_ctl_info_panic_on_ue,
+	&attr_ctl_info_log_ue,
+	&attr_ctl_info_log_ce,
+	&attr_ctl_info_poll_msec,
+	NULL,
+};
+
+/*
+ * edac_device_ctrl_master_release
+ *
+ *	called when the reference count for the 'main' kobj
+ *	for a edac_device control struct reaches zero
+ *
+ *	Reference count model:
+ *		One 'main' kobject for each control structure allocated.
+ *		That main kobj is initially set to one AND
+ *		the reference count for the EDAC 'core' module is
+ *		bumped by one, thus added 'keep in memory' dependency.
+ *
+ *		Each new internal kobj (in instances and blocks) then
+ *		bumps the 'main' kobject.
+ *
+ *		When they are released their release functions decrement
+ *		the 'main' kobj.
+ *
+ *		When the main kobj reaches zero (0) then THIS function
+ *		is called which then decrements the EDAC 'core' module.
+ *		When the module reference count reaches zero then the
+ *		module no longer has dependency on keeping the release
+ *		function code in memory and module can be unloaded.
+ *
+ *		This will support several control objects as well, each
+ *		with its own 'main' kobj.
+ */
+static void edac_device_ctrl_master_release(struct kobject *kobj)
+{
+	struct edac_device_ctl_info *edac_dev = to_edacdev(kobj);
+
+	edac_dbg(4, "control index=%d\n", edac_dev->dev_idx);
+
+	/* decrement the EDAC CORE module ref count */
+	module_put(edac_dev->owner);
+
+	/* free the control struct containing the 'main' kobj
+	 * passed in to this routine
+	 */
+	kfree(edac_dev);
+}
+
+/* ktype for the main (master) kobject */
+static struct kobj_type ktype_device_ctrl = {
+	.release = edac_device_ctrl_master_release,
+	.sysfs_ops = &device_ctl_info_ops,
+	.default_attrs = (struct attribute **)device_ctrl_attr,
+};
+
+/*
+ * edac_device_register_sysfs_main_kobj
+ *
+ *	perform the high level setup for the new edac_device instance
+ *
+ * Return:  0 SUCCESS
+ *         !0 FAILURE
+ */
+int edac_device_register_sysfs_main_kobj(struct edac_device_ctl_info *edac_dev)
+{
+	struct bus_type *edac_subsys;
+	int err;
+
+	edac_dbg(1, "\n");
+
+	/* get the /sys/devices/system/edac reference */
+	edac_subsys = edac_get_sysfs_subsys();
+
+	/* Point to the 'edac_subsys' this instance 'reports' to */
+	edac_dev->edac_subsys = edac_subsys;
+
+	/* Init the devices's kobject */
+	memset(&edac_dev->kobj, 0, sizeof(struct kobject));
+
+	/* Record which module 'owns' this control structure
+	 * and bump the ref count of the module
+	 */
+	edac_dev->owner = THIS_MODULE;
+
+	if (!try_module_get(edac_dev->owner)) {
+		err = -ENODEV;
+		goto err_out;
+	}
+
+	/* register */
+	err = kobject_init_and_add(&edac_dev->kobj, &ktype_device_ctrl,
+				   &edac_subsys->dev_root->kobj,
+				   "%s", edac_dev->name);
+	if (err) {
+		edac_dbg(1, "Failed to register '.../edac/%s'\n",
+			 edac_dev->name);
+		goto err_kobj_reg;
+	}
+	kobject_uevent(&edac_dev->kobj, KOBJ_ADD);
+
+	/* At this point, to 'free' the control struct,
+	 * edac_device_unregister_sysfs_main_kobj() must be used
+	 */
+
+	edac_dbg(4, "Registered '.../edac/%s' kobject\n", edac_dev->name);
+
+	return 0;
+
+	/* Error exit stack */
+err_kobj_reg:
+	kobject_put(&edac_dev->kobj);
+	module_put(edac_dev->owner);
+
+err_out:
+	return err;
+}
+
+/*
+ * edac_device_unregister_sysfs_main_kobj:
+ *	the '..../edac/<name>' kobject
+ */
+void edac_device_unregister_sysfs_main_kobj(struct edac_device_ctl_info *dev)
+{
+	edac_dbg(0, "\n");
+	edac_dbg(4, "name of kobject is: %s\n", kobject_name(&dev->kobj));
+
+	/*
+	 * Unregister the edac device's kobject and
+	 * allow for reference count to reach 0 at which point
+	 * the callback will be called to:
+	 *   a) module_put() this module
+	 *   b) 'kfree' the memory
+	 */
+	kobject_put(&dev->kobj);
+}
+
+/* edac_dev -> instance information */
+
+/*
+ * Set of low-level instance attribute show functions
+ */
+static ssize_t instance_ue_count_show(struct edac_device_instance *instance,
+				char *data)
+{
+	return sprintf(data, "%u\n", instance->counters.ue_count);
+}
+
+static ssize_t instance_ce_count_show(struct edac_device_instance *instance,
+				char *data)
+{
+	return sprintf(data, "%u\n", instance->counters.ce_count);
+}
+
+#define to_instance(k) container_of(k, struct edac_device_instance, kobj)
+#define to_instance_attr(a) container_of(a,struct instance_attribute,attr)
+
+/* DEVICE instance kobject release() function */
+static void edac_device_ctrl_instance_release(struct kobject *kobj)
+{
+	struct edac_device_instance *instance;
+
+	edac_dbg(1, "\n");
+
+	/* map from this kobj to the main control struct
+	 * and then dec the main kobj count
+	 */
+	instance = to_instance(kobj);
+	kobject_put(&instance->ctl->kobj);
+}
+
+/* instance specific attribute structure */
+struct instance_attribute {
+	struct attribute attr;
+	ssize_t(*show) (struct edac_device_instance *, char *);
+	ssize_t(*store) (struct edac_device_instance *, const char *, size_t);
+};
+
+/* Function to 'show' fields from the edac_dev 'instance' structure */
+static ssize_t edac_dev_instance_show(struct kobject *kobj,
+				struct attribute *attr, char *buffer)
+{
+	struct edac_device_instance *instance = to_instance(kobj);
+	struct instance_attribute *instance_attr = to_instance_attr(attr);
+
+	if (instance_attr->show)
+		return instance_attr->show(instance, buffer);
+	return -EIO;
+}
+
+/* Function to 'store' fields into the edac_dev 'instance' structure */
+static ssize_t edac_dev_instance_store(struct kobject *kobj,
+				struct attribute *attr,
+				const char *buffer, size_t count)
+{
+	struct edac_device_instance *instance = to_instance(kobj);
+	struct instance_attribute *instance_attr = to_instance_attr(attr);
+
+	if (instance_attr->store)
+		return instance_attr->store(instance, buffer, count);
+	return -EIO;
+}
+
+/* edac_dev file operations for an 'instance' */
+static const struct sysfs_ops device_instance_ops = {
+	.show = edac_dev_instance_show,
+	.store = edac_dev_instance_store
+};
+
+#define INSTANCE_ATTR(_name,_mode,_show,_store)        \
+static struct instance_attribute attr_instance_##_name = {      \
+	.attr = {.name = __stringify(_name), .mode = _mode },   \
+	.show   = _show,                                        \
+	.store  = _store,                                       \
+};
+
+/*
+ * Define attributes visible for the edac_device instance object
+ *	Each contains a pointer to a show and an optional set
+ *	function pointer that does the low level output/input
+ */
+INSTANCE_ATTR(ce_count, S_IRUGO, instance_ce_count_show, NULL);
+INSTANCE_ATTR(ue_count, S_IRUGO, instance_ue_count_show, NULL);
+
+/* list of edac_dev 'instance' attributes */
+static struct instance_attribute *device_instance_attr[] = {
+	&attr_instance_ce_count,
+	&attr_instance_ue_count,
+	NULL,
+};
+
+/* The 'ktype' for each edac_dev 'instance' */
+static struct kobj_type ktype_instance_ctrl = {
+	.release = edac_device_ctrl_instance_release,
+	.sysfs_ops = &device_instance_ops,
+	.default_attrs = (struct attribute **)device_instance_attr,
+};
+
+/* edac_dev -> instance -> block information */
+
+#define to_block(k) container_of(k, struct edac_device_block, kobj)
+#define to_block_attr(a) \
+	container_of(a, struct edac_dev_sysfs_block_attribute, attr)
+
+/*
+ * Set of low-level block attribute show functions
+ */
+static ssize_t block_ue_count_show(struct kobject *kobj,
+					struct attribute *attr, char *data)
+{
+	struct edac_device_block *block = to_block(kobj);
+
+	return sprintf(data, "%u\n", block->counters.ue_count);
+}
+
+static ssize_t block_ce_count_show(struct kobject *kobj,
+					struct attribute *attr, char *data)
+{
+	struct edac_device_block *block = to_block(kobj);
+
+	return sprintf(data, "%u\n", block->counters.ce_count);
+}
+
+/* DEVICE block kobject release() function */
+static void edac_device_ctrl_block_release(struct kobject *kobj)
+{
+	struct edac_device_block *block;
+
+	edac_dbg(1, "\n");
+
+	/* get the container of the kobj */
+	block = to_block(kobj);
+
+	/* map from 'block kobj' to 'block->instance->controller->main_kobj'
+	 * now 'release' the block kobject
+	 */
+	kobject_put(&block->instance->ctl->kobj);
+}
+
+
+/* Function to 'show' fields from the edac_dev 'block' structure */
+static ssize_t edac_dev_block_show(struct kobject *kobj,
+				struct attribute *attr, char *buffer)
+{
+	struct edac_dev_sysfs_block_attribute *block_attr =
+						to_block_attr(attr);
+
+	if (block_attr->show)
+		return block_attr->show(kobj, attr, buffer);
+	return -EIO;
+}
+
+/* Function to 'store' fields into the edac_dev 'block' structure */
+static ssize_t edac_dev_block_store(struct kobject *kobj,
+				struct attribute *attr,
+				const char *buffer, size_t count)
+{
+	struct edac_dev_sysfs_block_attribute *block_attr;
+
+	block_attr = to_block_attr(attr);
+
+	if (block_attr->store)
+		return block_attr->store(kobj, attr, buffer, count);
+	return -EIO;
+}
+
+/* edac_dev file operations for a 'block' */
+static const struct sysfs_ops device_block_ops = {
+	.show = edac_dev_block_show,
+	.store = edac_dev_block_store
+};
+
+#define BLOCK_ATTR(_name,_mode,_show,_store)        \
+static struct edac_dev_sysfs_block_attribute attr_block_##_name = {	\
+	.attr = {.name = __stringify(_name), .mode = _mode },   \
+	.show   = _show,                                        \
+	.store  = _store,                                       \
+};
+
+BLOCK_ATTR(ce_count, S_IRUGO, block_ce_count_show, NULL);
+BLOCK_ATTR(ue_count, S_IRUGO, block_ue_count_show, NULL);
+
+/* list of edac_dev 'block' attributes */
+static struct edac_dev_sysfs_block_attribute *device_block_attr[] = {
+	&attr_block_ce_count,
+	&attr_block_ue_count,
+	NULL,
+};
+
+/* The 'ktype' for each edac_dev 'block' */
+static struct kobj_type ktype_block_ctrl = {
+	.release = edac_device_ctrl_block_release,
+	.sysfs_ops = &device_block_ops,
+	.default_attrs = (struct attribute **)device_block_attr,
+};
+
+/* block ctor/dtor  code */
+
+/*
+ * edac_device_create_block
+ */
+static int edac_device_create_block(struct edac_device_ctl_info *edac_dev,
+				struct edac_device_instance *instance,
+				struct edac_device_block *block)
+{
+	int i;
+	int err;
+	struct edac_dev_sysfs_block_attribute *sysfs_attrib;
+	struct kobject *main_kobj;
+
+	edac_dbg(4, "Instance '%s' inst_p=%p  block '%s'  block_p=%p\n",
+		 instance->name, instance, block->name, block);
+	edac_dbg(4, "block kobj=%p  block kobj->parent=%p\n",
+		 &block->kobj, &block->kobj.parent);
+
+	/* init this block's kobject */
+	memset(&block->kobj, 0, sizeof(struct kobject));
+
+	/* bump the main kobject's reference count for this controller
+	 * and this instance is dependent on the main
+	 */
+	main_kobj = kobject_get(&edac_dev->kobj);
+	if (!main_kobj) {
+		err = -ENODEV;
+		goto err_out;
+	}
+
+	/* Add this block's kobject */
+	err = kobject_init_and_add(&block->kobj, &ktype_block_ctrl,
+				   &instance->kobj,
+				   "%s", block->name);
+	if (err) {
+		edac_dbg(1, "Failed to register instance '%s'\n", block->name);
+		kobject_put(main_kobj);
+		err = -ENODEV;
+		goto err_out;
+	}
+
+	/* If there are driver level block attributes, then added them
+	 * to the block kobject
+	 */
+	sysfs_attrib = block->block_attributes;
+	if (sysfs_attrib && block->nr_attribs) {
+		for (i = 0; i < block->nr_attribs; i++, sysfs_attrib++) {
+
+			edac_dbg(4, "creating block attrib='%s' attrib->%p to kobj=%p\n",
+				 sysfs_attrib->attr.name,
+				 sysfs_attrib, &block->kobj);
+
+			/* Create each block_attribute file */
+			err = sysfs_create_file(&block->kobj,
+				&sysfs_attrib->attr);
+			if (err)
+				goto err_on_attrib;
+		}
+	}
+	kobject_uevent(&block->kobj, KOBJ_ADD);
+
+	return 0;
+
+	/* Error unwind stack */
+err_on_attrib:
+	kobject_put(&block->kobj);
+
+err_out:
+	return err;
+}
+
+/*
+ * edac_device_delete_block(edac_dev,block);
+ */
+static void edac_device_delete_block(struct edac_device_ctl_info *edac_dev,
+				struct edac_device_block *block)
+{
+	struct edac_dev_sysfs_block_attribute *sysfs_attrib;
+	int i;
+
+	/* if this block has 'attributes' then we need to iterate over the list
+	 * and 'remove' the attributes on this block
+	 */
+	sysfs_attrib = block->block_attributes;
+	if (sysfs_attrib && block->nr_attribs) {
+		for (i = 0; i < block->nr_attribs; i++, sysfs_attrib++) {
+
+			/* remove each block_attrib file */
+			sysfs_remove_file(&block->kobj,
+				(struct attribute *) sysfs_attrib);
+		}
+	}
+
+	/* unregister this block's kobject, SEE:
+	 *	edac_device_ctrl_block_release() callback operation
+	 */
+	kobject_put(&block->kobj);
+}
+
+/* instance ctor/dtor code */
+
+/*
+ * edac_device_create_instance
+ *	create just one instance of an edac_device 'instance'
+ */
+static int edac_device_create_instance(struct edac_device_ctl_info *edac_dev,
+				int idx)
+{
+	int i, j;
+	int err;
+	struct edac_device_instance *instance;
+	struct kobject *main_kobj;
+
+	instance = &edac_dev->instances[idx];
+
+	/* Init the instance's kobject */
+	memset(&instance->kobj, 0, sizeof(struct kobject));
+
+	instance->ctl = edac_dev;
+
+	/* bump the main kobject's reference count for this controller
+	 * and this instance is dependent on the main
+	 */
+	main_kobj = kobject_get(&edac_dev->kobj);
+	if (!main_kobj) {
+		err = -ENODEV;
+		goto err_out;
+	}
+
+	/* Formally register this instance's kobject under the edac_device */
+	err = kobject_init_and_add(&instance->kobj, &ktype_instance_ctrl,
+				   &edac_dev->kobj, "%s", instance->name);
+	if (err != 0) {
+		edac_dbg(2, "Failed to register instance '%s'\n",
+			 instance->name);
+		kobject_put(main_kobj);
+		goto err_out;
+	}
+
+	edac_dbg(4, "now register '%d' blocks for instance %d\n",
+		 instance->nr_blocks, idx);
+
+	/* register all blocks of this instance */
+	for (i = 0; i < instance->nr_blocks; i++) {
+		err = edac_device_create_block(edac_dev, instance,
+						&instance->blocks[i]);
+		if (err) {
+			/* If any fail, remove all previous ones */
+			for (j = 0; j < i; j++)
+				edac_device_delete_block(edac_dev,
+							&instance->blocks[j]);
+			goto err_release_instance_kobj;
+		}
+	}
+	kobject_uevent(&instance->kobj, KOBJ_ADD);
+
+	edac_dbg(4, "Registered instance %d '%s' kobject\n",
+		 idx, instance->name);
+
+	return 0;
+
+	/* error unwind stack */
+err_release_instance_kobj:
+	kobject_put(&instance->kobj);
+
+err_out:
+	return err;
+}
+
+/*
+ * edac_device_remove_instance
+ *	remove an edac_device instance
+ */
+static void edac_device_delete_instance(struct edac_device_ctl_info *edac_dev,
+					int idx)
+{
+	struct edac_device_instance *instance;
+	int i;
+
+	instance = &edac_dev->instances[idx];
+
+	/* unregister all blocks in this instance */
+	for (i = 0; i < instance->nr_blocks; i++)
+		edac_device_delete_block(edac_dev, &instance->blocks[i]);
+
+	/* unregister this instance's kobject, SEE:
+	 *	edac_device_ctrl_instance_release() for callback operation
+	 */
+	kobject_put(&instance->kobj);
+}
+
+/*
+ * edac_device_create_instances
+ *	create the first level of 'instances' for this device
+ *	(ie  'cache' might have 'cache0', 'cache1', 'cache2', etc
+ */
+static int edac_device_create_instances(struct edac_device_ctl_info *edac_dev)
+{
+	int i, j;
+	int err;
+
+	edac_dbg(0, "\n");
+
+	/* iterate over creation of the instances */
+	for (i = 0; i < edac_dev->nr_instances; i++) {
+		err = edac_device_create_instance(edac_dev, i);
+		if (err) {
+			/* unwind previous instances on error */
+			for (j = 0; j < i; j++)
+				edac_device_delete_instance(edac_dev, j);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * edac_device_delete_instances(edac_dev);
+ *	unregister all the kobjects of the instances
+ */
+static void edac_device_delete_instances(struct edac_device_ctl_info *edac_dev)
+{
+	int i;
+
+	/* iterate over creation of the instances */
+	for (i = 0; i < edac_dev->nr_instances; i++)
+		edac_device_delete_instance(edac_dev, i);
+}
+
+/* edac_dev sysfs ctor/dtor  code */
+
+/*
+ * edac_device_add_main_sysfs_attributes
+ *	add some attributes to this instance's main kobject
+ */
+static int edac_device_add_main_sysfs_attributes(
+			struct edac_device_ctl_info *edac_dev)
+{
+	struct edac_dev_sysfs_attribute *sysfs_attrib;
+	int err = 0;
+
+	sysfs_attrib = edac_dev->sysfs_attributes;
+	if (sysfs_attrib) {
+		/* iterate over the array and create an attribute for each
+		 * entry in the list
+		 */
+		while (sysfs_attrib->attr.name != NULL) {
+			err = sysfs_create_file(&edac_dev->kobj,
+				(struct attribute*) sysfs_attrib);
+			if (err)
+				goto err_out;
+
+			sysfs_attrib++;
+		}
+	}
+
+err_out:
+	return err;
+}
+
+/*
+ * edac_device_remove_main_sysfs_attributes
+ *	remove any attributes to this instance's main kobject
+ */
+static void edac_device_remove_main_sysfs_attributes(
+			struct edac_device_ctl_info *edac_dev)
+{
+	struct edac_dev_sysfs_attribute *sysfs_attrib;
+
+	/* if there are main attributes, defined, remove them. First,
+	 * point to the start of the array and iterate over it
+	 * removing each attribute listed from this device's instance's kobject
+	 */
+	sysfs_attrib = edac_dev->sysfs_attributes;
+	if (sysfs_attrib) {
+		while (sysfs_attrib->attr.name != NULL) {
+			sysfs_remove_file(&edac_dev->kobj,
+					(struct attribute *) sysfs_attrib);
+			sysfs_attrib++;
+		}
+	}
+}
+
+/*
+ * edac_device_create_sysfs() Constructor
+ *
+ * accept a created edac_device control structure
+ * and 'export' it to sysfs. The 'main' kobj should already have been
+ * created. 'instance' and 'block' kobjects should be registered
+ * along with any 'block' attributes from the low driver. In addition,
+ * the main attributes (if any) are connected to the main kobject of
+ * the control structure.
+ *
+ * Return:
+ *	0	Success
+ *	!0	Failure
+ */
+int edac_device_create_sysfs(struct edac_device_ctl_info *edac_dev)
+{
+	int err;
+	struct kobject *edac_kobj = &edac_dev->kobj;
+
+	edac_dbg(0, "idx=%d\n", edac_dev->dev_idx);
+
+	/*  go create any main attributes callers wants */
+	err = edac_device_add_main_sysfs_attributes(edac_dev);
+	if (err) {
+		edac_dbg(0, "failed to add sysfs attribs\n");
+		goto err_out;
+	}
+
+	/* create a symlink from the edac device
+	 * to the platform 'device' being used for this
+	 */
+	err = sysfs_create_link(edac_kobj,
+				&edac_dev->dev->kobj, EDAC_DEVICE_SYMLINK);
+	if (err) {
+		edac_dbg(0, "sysfs_create_link() returned err= %d\n", err);
+		goto err_remove_main_attribs;
+	}
+
+	/* Create the first level instance directories
+	 * In turn, the nested blocks beneath the instances will
+	 * be registered as well
+	 */
+	err = edac_device_create_instances(edac_dev);
+	if (err) {
+		edac_dbg(0, "edac_device_create_instances() returned err= %d\n",
+			 err);
+		goto err_remove_link;
+	}
+
+
+	edac_dbg(4, "create-instances done, idx=%d\n", edac_dev->dev_idx);
+
+	return 0;
+
+	/* Error unwind stack */
+err_remove_link:
+	/* remove the sym link */
+	sysfs_remove_link(&edac_dev->kobj, EDAC_DEVICE_SYMLINK);
+
+err_remove_main_attribs:
+	edac_device_remove_main_sysfs_attributes(edac_dev);
+
+err_out:
+	return err;
+}
+
+/*
+ * edac_device_remove_sysfs() destructor
+ *
+ * given an edac_device struct, tear down the kobject resources
+ */
+void edac_device_remove_sysfs(struct edac_device_ctl_info *edac_dev)
+{
+	edac_dbg(0, "\n");
+
+	/* remove any main attributes for this device */
+	edac_device_remove_main_sysfs_attributes(edac_dev);
+
+	/* remove the device sym link */
+	sysfs_remove_link(&edac_dev->kobj, EDAC_DEVICE_SYMLINK);
+
+	/* walk the instance/block kobject tree, deconstructing it */
+	edac_device_delete_instances(edac_dev);
+}
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
new file mode 100644
index 000000000..61d72bd96
--- /dev/null
+++ b/drivers/edac/edac_mc.c
@@ -0,0 +1,1261 @@
+/*
+ * edac_mc kernel module
+ * (C) 2005, 2006 Linux Networx (http://lnxi.com)
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Written by Thayne Harbaugh
+ * Based on work by Dan Hollis <goemon at anime dot net> and others.
+ *	http://www.anime.net/~goemon/linux-ecc/
+ *
+ * Modified by Dave Peterson and Doug Thompson
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/proc_fs.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/sysctl.h>
+#include <linux/highmem.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/ctype.h>
+#include <linux/edac.h>
+#include <linux/bitops.h>
+#include <linux/uaccess.h>
+#include <asm/page.h>
+#include "edac_mc.h"
+#include "edac_module.h"
+#include <ras/ras_event.h>
+
+#ifdef CONFIG_EDAC_ATOMIC_SCRUB
+#include <asm/edac.h>
+#else
+#define edac_atomic_scrub(va, size) do { } while (0)
+#endif
+
+int edac_op_state = EDAC_OPSTATE_INVAL;
+EXPORT_SYMBOL_GPL(edac_op_state);
+
+static int edac_report = EDAC_REPORTING_ENABLED;
+
+/* lock to memory controller's control array */
+static DEFINE_MUTEX(mem_ctls_mutex);
+static LIST_HEAD(mc_devices);
+
+/*
+ * Used to lock EDAC MC to just one module, avoiding two drivers e. g.
+ *	apei/ghes and i7core_edac to be used at the same time.
+ */
+static const char *edac_mc_owner;
+
+static struct bus_type mc_bus[EDAC_MAX_MCS];
+
+int edac_get_report_status(void)
+{
+	return edac_report;
+}
+EXPORT_SYMBOL_GPL(edac_get_report_status);
+
+void edac_set_report_status(int new)
+{
+	if (new == EDAC_REPORTING_ENABLED ||
+	    new == EDAC_REPORTING_DISABLED ||
+	    new == EDAC_REPORTING_FORCE)
+		edac_report = new;
+}
+EXPORT_SYMBOL_GPL(edac_set_report_status);
+
+static int edac_report_set(const char *str, const struct kernel_param *kp)
+{
+	if (!str)
+		return -EINVAL;
+
+	if (!strncmp(str, "on", 2))
+		edac_report = EDAC_REPORTING_ENABLED;
+	else if (!strncmp(str, "off", 3))
+		edac_report = EDAC_REPORTING_DISABLED;
+	else if (!strncmp(str, "force", 5))
+		edac_report = EDAC_REPORTING_FORCE;
+
+	return 0;
+}
+
+static int edac_report_get(char *buffer, const struct kernel_param *kp)
+{
+	int ret = 0;
+
+	switch (edac_report) {
+	case EDAC_REPORTING_ENABLED:
+		ret = sprintf(buffer, "on");
+		break;
+	case EDAC_REPORTING_DISABLED:
+		ret = sprintf(buffer, "off");
+		break;
+	case EDAC_REPORTING_FORCE:
+		ret = sprintf(buffer, "force");
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static const struct kernel_param_ops edac_report_ops = {
+	.set = edac_report_set,
+	.get = edac_report_get,
+};
+
+module_param_cb(edac_report, &edac_report_ops, &edac_report, 0644);
+
+unsigned edac_dimm_info_location(struct dimm_info *dimm, char *buf,
+			         unsigned len)
+{
+	struct mem_ctl_info *mci = dimm->mci;
+	int i, n, count = 0;
+	char *p = buf;
+
+	for (i = 0; i < mci->n_layers; i++) {
+		n = snprintf(p, len, "%s %d ",
+			      edac_layer_name[mci->layers[i].type],
+			      dimm->location[i]);
+		p += n;
+		len -= n;
+		count += n;
+		if (!len)
+			break;
+	}
+
+	return count;
+}
+
+#ifdef CONFIG_EDAC_DEBUG
+
+static void edac_mc_dump_channel(struct rank_info *chan)
+{
+	edac_dbg(4, "  channel->chan_idx = %d\n", chan->chan_idx);
+	edac_dbg(4, "    channel = %p\n", chan);
+	edac_dbg(4, "    channel->csrow = %p\n", chan->csrow);
+	edac_dbg(4, "    channel->dimm = %p\n", chan->dimm);
+}
+
+static void edac_mc_dump_dimm(struct dimm_info *dimm, int number)
+{
+	char location[80];
+
+	edac_dimm_info_location(dimm, location, sizeof(location));
+
+	edac_dbg(4, "%s%i: %smapped as virtual row %d, chan %d\n",
+		 dimm->mci->csbased ? "rank" : "dimm",
+		 number, location, dimm->csrow, dimm->cschannel);
+	edac_dbg(4, "  dimm = %p\n", dimm);
+	edac_dbg(4, "  dimm->label = '%s'\n", dimm->label);
+	edac_dbg(4, "  dimm->nr_pages = 0x%x\n", dimm->nr_pages);
+	edac_dbg(4, "  dimm->grain = %d\n", dimm->grain);
+	edac_dbg(4, "  dimm->nr_pages = 0x%x\n", dimm->nr_pages);
+}
+
+static void edac_mc_dump_csrow(struct csrow_info *csrow)
+{
+	edac_dbg(4, "csrow->csrow_idx = %d\n", csrow->csrow_idx);
+	edac_dbg(4, "  csrow = %p\n", csrow);
+	edac_dbg(4, "  csrow->first_page = 0x%lx\n", csrow->first_page);
+	edac_dbg(4, "  csrow->last_page = 0x%lx\n", csrow->last_page);
+	edac_dbg(4, "  csrow->page_mask = 0x%lx\n", csrow->page_mask);
+	edac_dbg(4, "  csrow->nr_channels = %d\n", csrow->nr_channels);
+	edac_dbg(4, "  csrow->channels = %p\n", csrow->channels);
+	edac_dbg(4, "  csrow->mci = %p\n", csrow->mci);
+}
+
+static void edac_mc_dump_mci(struct mem_ctl_info *mci)
+{
+	edac_dbg(3, "\tmci = %p\n", mci);
+	edac_dbg(3, "\tmci->mtype_cap = %lx\n", mci->mtype_cap);
+	edac_dbg(3, "\tmci->edac_ctl_cap = %lx\n", mci->edac_ctl_cap);
+	edac_dbg(3, "\tmci->edac_cap = %lx\n", mci->edac_cap);
+	edac_dbg(4, "\tmci->edac_check = %p\n", mci->edac_check);
+	edac_dbg(3, "\tmci->nr_csrows = %d, csrows = %p\n",
+		 mci->nr_csrows, mci->csrows);
+	edac_dbg(3, "\tmci->nr_dimms = %d, dimms = %p\n",
+		 mci->tot_dimms, mci->dimms);
+	edac_dbg(3, "\tdev = %p\n", mci->pdev);
+	edac_dbg(3, "\tmod_name:ctl_name = %s:%s\n",
+		 mci->mod_name, mci->ctl_name);
+	edac_dbg(3, "\tpvt_info = %p\n\n", mci->pvt_info);
+}
+
+#endif				/* CONFIG_EDAC_DEBUG */
+
+const char * const edac_mem_types[] = {
+	[MEM_EMPTY]	= "Empty",
+	[MEM_RESERVED]	= "Reserved",
+	[MEM_UNKNOWN]	= "Unknown",
+	[MEM_FPM]	= "FPM",
+	[MEM_EDO]	= "EDO",
+	[MEM_BEDO]	= "BEDO",
+	[MEM_SDR]	= "Unbuffered-SDR",
+	[MEM_RDR]	= "Registered-SDR",
+	[MEM_DDR]	= "Unbuffered-DDR",
+	[MEM_RDDR]	= "Registered-DDR",
+	[MEM_RMBS]	= "RMBS",
+	[MEM_DDR2]	= "Unbuffered-DDR2",
+	[MEM_FB_DDR2]	= "FullyBuffered-DDR2",
+	[MEM_RDDR2]	= "Registered-DDR2",
+	[MEM_XDR]	= "XDR",
+	[MEM_DDR3]	= "Unbuffered-DDR3",
+	[MEM_RDDR3]	= "Registered-DDR3",
+	[MEM_LRDDR3]	= "Load-Reduced-DDR3-RAM",
+	[MEM_DDR4]	= "Unbuffered-DDR4",
+	[MEM_RDDR4]	= "Registered-DDR4",
+	[MEM_LRDDR4]	= "Load-Reduced-DDR4-RAM",
+	[MEM_NVDIMM]	= "Non-volatile-RAM",
+};
+EXPORT_SYMBOL_GPL(edac_mem_types);
+
+/**
+ * edac_align_ptr - Prepares the pointer offsets for a single-shot allocation
+ * @p:		pointer to a pointer with the memory offset to be used. At
+ *		return, this will be incremented to point to the next offset
+ * @size:	Size of the data structure to be reserved
+ * @n_elems:	Number of elements that should be reserved
+ *
+ * If 'size' is a constant, the compiler will optimize this whole function
+ * down to either a no-op or the addition of a constant to the value of '*p'.
+ *
+ * The 'p' pointer is absolutely needed to keep the proper advancing
+ * further in memory to the proper offsets when allocating the struct along
+ * with its embedded structs, as edac_device_alloc_ctl_info() does it
+ * above, for example.
+ *
+ * At return, the pointer 'p' will be incremented to be used on a next call
+ * to this function.
+ */
+void *edac_align_ptr(void **p, unsigned size, int n_elems)
+{
+	unsigned align, r;
+	void *ptr = *p;
+
+	*p += size * n_elems;
+
+	/*
+	 * 'p' can possibly be an unaligned item X such that sizeof(X) is
+	 * 'size'.  Adjust 'p' so that its alignment is at least as
+	 * stringent as what the compiler would provide for X and return
+	 * the aligned result.
+	 * Here we assume that the alignment of a "long long" is the most
+	 * stringent alignment that the compiler will ever provide by default.
+	 * As far as I know, this is a reasonable assumption.
+	 */
+	if (size > sizeof(long))
+		align = sizeof(long long);
+	else if (size > sizeof(int))
+		align = sizeof(long);
+	else if (size > sizeof(short))
+		align = sizeof(int);
+	else if (size > sizeof(char))
+		align = sizeof(short);
+	else
+		return (char *)ptr;
+
+	r = (unsigned long)ptr % align;
+
+	if (r == 0)
+		return (char *)ptr;
+
+	*p += align - r;
+
+	return (void *)(((unsigned long)ptr) + align - r);
+}
+
+static void _edac_mc_free(struct mem_ctl_info *mci)
+{
+	int i, chn, row;
+	struct csrow_info *csr;
+	const unsigned int tot_dimms = mci->tot_dimms;
+	const unsigned int tot_channels = mci->num_cschannel;
+	const unsigned int tot_csrows = mci->nr_csrows;
+
+	if (mci->dimms) {
+		for (i = 0; i < tot_dimms; i++)
+			kfree(mci->dimms[i]);
+		kfree(mci->dimms);
+	}
+	if (mci->csrows) {
+		for (row = 0; row < tot_csrows; row++) {
+			csr = mci->csrows[row];
+			if (csr) {
+				if (csr->channels) {
+					for (chn = 0; chn < tot_channels; chn++)
+						kfree(csr->channels[chn]);
+					kfree(csr->channels);
+				}
+				kfree(csr);
+			}
+		}
+		kfree(mci->csrows);
+	}
+	kfree(mci);
+}
+
+struct mem_ctl_info *edac_mc_alloc(unsigned mc_num,
+				   unsigned n_layers,
+				   struct edac_mc_layer *layers,
+				   unsigned sz_pvt)
+{
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer *layer;
+	struct csrow_info *csr;
+	struct rank_info *chan;
+	struct dimm_info *dimm;
+	u32 *ce_per_layer[EDAC_MAX_LAYERS], *ue_per_layer[EDAC_MAX_LAYERS];
+	unsigned pos[EDAC_MAX_LAYERS];
+	unsigned size, tot_dimms = 1, count = 1;
+	unsigned tot_csrows = 1, tot_channels = 1, tot_errcount = 0;
+	void *pvt, *p, *ptr = NULL;
+	int i, j, row, chn, n, len, off;
+	bool per_rank = false;
+
+	BUG_ON(n_layers > EDAC_MAX_LAYERS || n_layers == 0);
+	/*
+	 * Calculate the total amount of dimms and csrows/cschannels while
+	 * in the old API emulation mode
+	 */
+	for (i = 0; i < n_layers; i++) {
+		tot_dimms *= layers[i].size;
+		if (layers[i].is_virt_csrow)
+			tot_csrows *= layers[i].size;
+		else
+			tot_channels *= layers[i].size;
+
+		if (layers[i].type == EDAC_MC_LAYER_CHIP_SELECT)
+			per_rank = true;
+	}
+
+	/* Figure out the offsets of the various items from the start of an mc
+	 * structure.  We want the alignment of each item to be at least as
+	 * stringent as what the compiler would provide if we could simply
+	 * hardcode everything into a single struct.
+	 */
+	mci = edac_align_ptr(&ptr, sizeof(*mci), 1);
+	layer = edac_align_ptr(&ptr, sizeof(*layer), n_layers);
+	for (i = 0; i < n_layers; i++) {
+		count *= layers[i].size;
+		edac_dbg(4, "errcount layer %d size %d\n", i, count);
+		ce_per_layer[i] = edac_align_ptr(&ptr, sizeof(u32), count);
+		ue_per_layer[i] = edac_align_ptr(&ptr, sizeof(u32), count);
+		tot_errcount += 2 * count;
+	}
+
+	edac_dbg(4, "allocating %d error counters\n", tot_errcount);
+	pvt = edac_align_ptr(&ptr, sz_pvt, 1);
+	size = ((unsigned long)pvt) + sz_pvt;
+
+	edac_dbg(1, "allocating %u bytes for mci data (%d %s, %d csrows/channels)\n",
+		 size,
+		 tot_dimms,
+		 per_rank ? "ranks" : "dimms",
+		 tot_csrows * tot_channels);
+
+	mci = kzalloc(size, GFP_KERNEL);
+	if (mci == NULL)
+		return NULL;
+
+	/* Adjust pointers so they point within the memory we just allocated
+	 * rather than an imaginary chunk of memory located at address 0.
+	 */
+	layer = (struct edac_mc_layer *)(((char *)mci) + ((unsigned long)layer));
+	for (i = 0; i < n_layers; i++) {
+		mci->ce_per_layer[i] = (u32 *)((char *)mci + ((unsigned long)ce_per_layer[i]));
+		mci->ue_per_layer[i] = (u32 *)((char *)mci + ((unsigned long)ue_per_layer[i]));
+	}
+	pvt = sz_pvt ? (((char *)mci) + ((unsigned long)pvt)) : NULL;
+
+	/* setup index and various internal pointers */
+	mci->mc_idx = mc_num;
+	mci->tot_dimms = tot_dimms;
+	mci->pvt_info = pvt;
+	mci->n_layers = n_layers;
+	mci->layers = layer;
+	memcpy(mci->layers, layers, sizeof(*layer) * n_layers);
+	mci->nr_csrows = tot_csrows;
+	mci->num_cschannel = tot_channels;
+	mci->csbased = per_rank;
+
+	/*
+	 * Alocate and fill the csrow/channels structs
+	 */
+	mci->csrows = kcalloc(tot_csrows, sizeof(*mci->csrows), GFP_KERNEL);
+	if (!mci->csrows)
+		goto error;
+	for (row = 0; row < tot_csrows; row++) {
+		csr = kzalloc(sizeof(**mci->csrows), GFP_KERNEL);
+		if (!csr)
+			goto error;
+		mci->csrows[row] = csr;
+		csr->csrow_idx = row;
+		csr->mci = mci;
+		csr->nr_channels = tot_channels;
+		csr->channels = kcalloc(tot_channels, sizeof(*csr->channels),
+					GFP_KERNEL);
+		if (!csr->channels)
+			goto error;
+
+		for (chn = 0; chn < tot_channels; chn++) {
+			chan = kzalloc(sizeof(**csr->channels), GFP_KERNEL);
+			if (!chan)
+				goto error;
+			csr->channels[chn] = chan;
+			chan->chan_idx = chn;
+			chan->csrow = csr;
+		}
+	}
+
+	/*
+	 * Allocate and fill the dimm structs
+	 */
+	mci->dimms  = kcalloc(tot_dimms, sizeof(*mci->dimms), GFP_KERNEL);
+	if (!mci->dimms)
+		goto error;
+
+	memset(&pos, 0, sizeof(pos));
+	row = 0;
+	chn = 0;
+	for (i = 0; i < tot_dimms; i++) {
+		chan = mci->csrows[row]->channels[chn];
+		off = EDAC_DIMM_OFF(layer, n_layers, pos[0], pos[1], pos[2]);
+		if (off < 0 || off >= tot_dimms) {
+			edac_mc_printk(mci, KERN_ERR, "EDAC core bug: EDAC_DIMM_OFF is trying to do an illegal data access\n");
+			goto error;
+		}
+
+		dimm = kzalloc(sizeof(**mci->dimms), GFP_KERNEL);
+		if (!dimm)
+			goto error;
+		mci->dimms[off] = dimm;
+		dimm->mci = mci;
+
+		/*
+		 * Copy DIMM location and initialize it.
+		 */
+		len = sizeof(dimm->label);
+		p = dimm->label;
+		n = snprintf(p, len, "mc#%u", mc_num);
+		p += n;
+		len -= n;
+		for (j = 0; j < n_layers; j++) {
+			n = snprintf(p, len, "%s#%u",
+				     edac_layer_name[layers[j].type],
+				     pos[j]);
+			p += n;
+			len -= n;
+			dimm->location[j] = pos[j];
+
+			if (len <= 0)
+				break;
+		}
+
+		/* Link it to the csrows old API data */
+		chan->dimm = dimm;
+		dimm->csrow = row;
+		dimm->cschannel = chn;
+
+		/* Increment csrow location */
+		if (layers[0].is_virt_csrow) {
+			chn++;
+			if (chn == tot_channels) {
+				chn = 0;
+				row++;
+			}
+		} else {
+			row++;
+			if (row == tot_csrows) {
+				row = 0;
+				chn++;
+			}
+		}
+
+		/* Increment dimm location */
+		for (j = n_layers - 1; j >= 0; j--) {
+			pos[j]++;
+			if (pos[j] < layers[j].size)
+				break;
+			pos[j] = 0;
+		}
+	}
+
+	mci->op_state = OP_ALLOC;
+
+	return mci;
+
+error:
+	_edac_mc_free(mci);
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(edac_mc_alloc);
+
+void edac_mc_free(struct mem_ctl_info *mci)
+{
+	edac_dbg(1, "\n");
+
+	/* If we're not yet registered with sysfs free only what was allocated
+	 * in edac_mc_alloc().
+	 */
+	if (!device_is_registered(&mci->dev)) {
+		_edac_mc_free(mci);
+		return;
+	}
+
+	/* the mci instance is freed here, when the sysfs object is dropped */
+	edac_unregister_sysfs(mci);
+}
+EXPORT_SYMBOL_GPL(edac_mc_free);
+
+bool edac_has_mcs(void)
+{
+	bool ret;
+
+	mutex_lock(&mem_ctls_mutex);
+
+	ret = list_empty(&mc_devices);
+
+	mutex_unlock(&mem_ctls_mutex);
+
+	return !ret;
+}
+EXPORT_SYMBOL_GPL(edac_has_mcs);
+
+/* Caller must hold mem_ctls_mutex */
+static struct mem_ctl_info *__find_mci_by_dev(struct device *dev)
+{
+	struct mem_ctl_info *mci;
+	struct list_head *item;
+
+	edac_dbg(3, "\n");
+
+	list_for_each(item, &mc_devices) {
+		mci = list_entry(item, struct mem_ctl_info, link);
+
+		if (mci->pdev == dev)
+			return mci;
+	}
+
+	return NULL;
+}
+
+/**
+ * find_mci_by_dev
+ *
+ *	scan list of controllers looking for the one that manages
+ *	the 'dev' device
+ * @dev: pointer to a struct device related with the MCI
+ */
+struct mem_ctl_info *find_mci_by_dev(struct device *dev)
+{
+	struct mem_ctl_info *ret;
+
+	mutex_lock(&mem_ctls_mutex);
+	ret = __find_mci_by_dev(dev);
+	mutex_unlock(&mem_ctls_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(find_mci_by_dev);
+
+/*
+ * edac_mc_workq_function
+ *	performs the operation scheduled by a workq request
+ */
+static void edac_mc_workq_function(struct work_struct *work_req)
+{
+	struct delayed_work *d_work = to_delayed_work(work_req);
+	struct mem_ctl_info *mci = to_edac_mem_ctl_work(d_work);
+
+	mutex_lock(&mem_ctls_mutex);
+
+	if (mci->op_state != OP_RUNNING_POLL) {
+		mutex_unlock(&mem_ctls_mutex);
+		return;
+	}
+
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		mci->edac_check(mci);
+
+	mutex_unlock(&mem_ctls_mutex);
+
+	/* Queue ourselves again. */
+	edac_queue_work(&mci->work, msecs_to_jiffies(edac_mc_get_poll_msec()));
+}
+
+/*
+ * edac_mc_reset_delay_period(unsigned long value)
+ *
+ *	user space has updated our poll period value, need to
+ *	reset our workq delays
+ */
+void edac_mc_reset_delay_period(unsigned long value)
+{
+	struct mem_ctl_info *mci;
+	struct list_head *item;
+
+	mutex_lock(&mem_ctls_mutex);
+
+	list_for_each(item, &mc_devices) {
+		mci = list_entry(item, struct mem_ctl_info, link);
+
+		if (mci->op_state == OP_RUNNING_POLL)
+			edac_mod_work(&mci->work, value);
+	}
+	mutex_unlock(&mem_ctls_mutex);
+}
+
+
+
+/* Return 0 on success, 1 on failure.
+ * Before calling this function, caller must
+ * assign a unique value to mci->mc_idx.
+ *
+ *	locking model:
+ *
+ *		called with the mem_ctls_mutex lock held
+ */
+static int add_mc_to_global_list(struct mem_ctl_info *mci)
+{
+	struct list_head *item, *insert_before;
+	struct mem_ctl_info *p;
+
+	insert_before = &mc_devices;
+
+	p = __find_mci_by_dev(mci->pdev);
+	if (unlikely(p != NULL))
+		goto fail0;
+
+	list_for_each(item, &mc_devices) {
+		p = list_entry(item, struct mem_ctl_info, link);
+
+		if (p->mc_idx >= mci->mc_idx) {
+			if (unlikely(p->mc_idx == mci->mc_idx))
+				goto fail1;
+
+			insert_before = item;
+			break;
+		}
+	}
+
+	list_add_tail_rcu(&mci->link, insert_before);
+	return 0;
+
+fail0:
+	edac_printk(KERN_WARNING, EDAC_MC,
+		"%s (%s) %s %s already assigned %d\n", dev_name(p->pdev),
+		edac_dev_name(mci), p->mod_name, p->ctl_name, p->mc_idx);
+	return 1;
+
+fail1:
+	edac_printk(KERN_WARNING, EDAC_MC,
+		"bug in low-level driver: attempt to assign\n"
+		"    duplicate mc_idx %d in %s()\n", p->mc_idx, __func__);
+	return 1;
+}
+
+static int del_mc_from_global_list(struct mem_ctl_info *mci)
+{
+	list_del_rcu(&mci->link);
+
+	/* these are for safe removal of devices from global list while
+	 * NMI handlers may be traversing list
+	 */
+	synchronize_rcu();
+	INIT_LIST_HEAD(&mci->link);
+
+	return list_empty(&mc_devices);
+}
+
+struct mem_ctl_info *edac_mc_find(int idx)
+{
+	struct mem_ctl_info *mci;
+	struct list_head *item;
+
+	mutex_lock(&mem_ctls_mutex);
+
+	list_for_each(item, &mc_devices) {
+		mci = list_entry(item, struct mem_ctl_info, link);
+		if (mci->mc_idx == idx)
+			goto unlock;
+	}
+
+	mci = NULL;
+unlock:
+	mutex_unlock(&mem_ctls_mutex);
+	return mci;
+}
+EXPORT_SYMBOL(edac_mc_find);
+
+const char *edac_get_owner(void)
+{
+	return edac_mc_owner;
+}
+EXPORT_SYMBOL_GPL(edac_get_owner);
+
+/* FIXME - should a warning be printed if no error detection? correction? */
+int edac_mc_add_mc_with_groups(struct mem_ctl_info *mci,
+			       const struct attribute_group **groups)
+{
+	int ret = -EINVAL;
+	edac_dbg(0, "\n");
+
+	if (mci->mc_idx >= EDAC_MAX_MCS) {
+		pr_warn_once("Too many memory controllers: %d\n", mci->mc_idx);
+		return -ENODEV;
+	}
+
+#ifdef CONFIG_EDAC_DEBUG
+	if (edac_debug_level >= 3)
+		edac_mc_dump_mci(mci);
+
+	if (edac_debug_level >= 4) {
+		int i;
+
+		for (i = 0; i < mci->nr_csrows; i++) {
+			struct csrow_info *csrow = mci->csrows[i];
+			u32 nr_pages = 0;
+			int j;
+
+			for (j = 0; j < csrow->nr_channels; j++)
+				nr_pages += csrow->channels[j]->dimm->nr_pages;
+			if (!nr_pages)
+				continue;
+			edac_mc_dump_csrow(csrow);
+			for (j = 0; j < csrow->nr_channels; j++)
+				if (csrow->channels[j]->dimm->nr_pages)
+					edac_mc_dump_channel(csrow->channels[j]);
+		}
+		for (i = 0; i < mci->tot_dimms; i++)
+			if (mci->dimms[i]->nr_pages)
+				edac_mc_dump_dimm(mci->dimms[i], i);
+	}
+#endif
+	mutex_lock(&mem_ctls_mutex);
+
+	if (edac_mc_owner && edac_mc_owner != mci->mod_name) {
+		ret = -EPERM;
+		goto fail0;
+	}
+
+	if (add_mc_to_global_list(mci))
+		goto fail0;
+
+	/* set load time so that error rate can be tracked */
+	mci->start_time = jiffies;
+
+	mci->bus = &mc_bus[mci->mc_idx];
+
+	if (edac_create_sysfs_mci_device(mci, groups)) {
+		edac_mc_printk(mci, KERN_WARNING,
+			"failed to create sysfs device\n");
+		goto fail1;
+	}
+
+	if (mci->edac_check) {
+		mci->op_state = OP_RUNNING_POLL;
+
+		INIT_DELAYED_WORK(&mci->work, edac_mc_workq_function);
+		edac_queue_work(&mci->work, msecs_to_jiffies(edac_mc_get_poll_msec()));
+
+	} else {
+		mci->op_state = OP_RUNNING_INTERRUPT;
+	}
+
+	/* Report action taken */
+	edac_mc_printk(mci, KERN_INFO,
+		"Giving out device to module %s controller %s: DEV %s (%s)\n",
+		mci->mod_name, mci->ctl_name, mci->dev_name,
+		edac_op_state_to_string(mci->op_state));
+
+	edac_mc_owner = mci->mod_name;
+
+	mutex_unlock(&mem_ctls_mutex);
+	return 0;
+
+fail1:
+	del_mc_from_global_list(mci);
+
+fail0:
+	mutex_unlock(&mem_ctls_mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(edac_mc_add_mc_with_groups);
+
+struct mem_ctl_info *edac_mc_del_mc(struct device *dev)
+{
+	struct mem_ctl_info *mci;
+
+	edac_dbg(0, "\n");
+
+	mutex_lock(&mem_ctls_mutex);
+
+	/* find the requested mci struct in the global list */
+	mci = __find_mci_by_dev(dev);
+	if (mci == NULL) {
+		mutex_unlock(&mem_ctls_mutex);
+		return NULL;
+	}
+
+	/* mark MCI offline: */
+	mci->op_state = OP_OFFLINE;
+
+	if (del_mc_from_global_list(mci))
+		edac_mc_owner = NULL;
+
+	mutex_unlock(&mem_ctls_mutex);
+
+	if (mci->edac_check)
+		edac_stop_work(&mci->work);
+
+	/* remove from sysfs */
+	edac_remove_sysfs_mci_device(mci);
+
+	edac_printk(KERN_INFO, EDAC_MC,
+		"Removed device %d for %s %s: DEV %s\n", mci->mc_idx,
+		mci->mod_name, mci->ctl_name, edac_dev_name(mci));
+
+	return mci;
+}
+EXPORT_SYMBOL_GPL(edac_mc_del_mc);
+
+static void edac_mc_scrub_block(unsigned long page, unsigned long offset,
+				u32 size)
+{
+	struct page *pg;
+	void *virt_addr;
+	unsigned long flags = 0;
+
+	edac_dbg(3, "\n");
+
+	/* ECC error page was not in our memory. Ignore it. */
+	if (!pfn_valid(page))
+		return;
+
+	/* Find the actual page structure then map it and fix */
+	pg = pfn_to_page(page);
+
+	if (PageHighMem(pg))
+		local_irq_save(flags);
+
+	virt_addr = kmap_atomic(pg);
+
+	/* Perform architecture specific atomic scrub operation */
+	edac_atomic_scrub(virt_addr + offset, size);
+
+	/* Unmap and complete */
+	kunmap_atomic(virt_addr);
+
+	if (PageHighMem(pg))
+		local_irq_restore(flags);
+}
+
+/* FIXME - should return -1 */
+int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci, unsigned long page)
+{
+	struct csrow_info **csrows = mci->csrows;
+	int row, i, j, n;
+
+	edac_dbg(1, "MC%d: 0x%lx\n", mci->mc_idx, page);
+	row = -1;
+
+	for (i = 0; i < mci->nr_csrows; i++) {
+		struct csrow_info *csrow = csrows[i];
+		n = 0;
+		for (j = 0; j < csrow->nr_channels; j++) {
+			struct dimm_info *dimm = csrow->channels[j]->dimm;
+			n += dimm->nr_pages;
+		}
+		if (n == 0)
+			continue;
+
+		edac_dbg(3, "MC%d: first(0x%lx) page(0x%lx) last(0x%lx) mask(0x%lx)\n",
+			 mci->mc_idx,
+			 csrow->first_page, page, csrow->last_page,
+			 csrow->page_mask);
+
+		if ((page >= csrow->first_page) &&
+		    (page <= csrow->last_page) &&
+		    ((page & csrow->page_mask) ==
+		     (csrow->first_page & csrow->page_mask))) {
+			row = i;
+			break;
+		}
+	}
+
+	if (row == -1)
+		edac_mc_printk(mci, KERN_ERR,
+			"could not look up page error address %lx\n",
+			(unsigned long)page);
+
+	return row;
+}
+EXPORT_SYMBOL_GPL(edac_mc_find_csrow_by_page);
+
+const char *edac_layer_name[] = {
+	[EDAC_MC_LAYER_BRANCH] = "branch",
+	[EDAC_MC_LAYER_CHANNEL] = "channel",
+	[EDAC_MC_LAYER_SLOT] = "slot",
+	[EDAC_MC_LAYER_CHIP_SELECT] = "csrow",
+	[EDAC_MC_LAYER_ALL_MEM] = "memory",
+};
+EXPORT_SYMBOL_GPL(edac_layer_name);
+
+static void edac_inc_ce_error(struct mem_ctl_info *mci,
+			      bool enable_per_layer_report,
+			      const int pos[EDAC_MAX_LAYERS],
+			      const u16 count)
+{
+	int i, index = 0;
+
+	mci->ce_mc += count;
+
+	if (!enable_per_layer_report) {
+		mci->ce_noinfo_count += count;
+		return;
+	}
+
+	for (i = 0; i < mci->n_layers; i++) {
+		if (pos[i] < 0)
+			break;
+		index += pos[i];
+		mci->ce_per_layer[i][index] += count;
+
+		if (i < mci->n_layers - 1)
+			index *= mci->layers[i + 1].size;
+	}
+}
+
+static void edac_inc_ue_error(struct mem_ctl_info *mci,
+				    bool enable_per_layer_report,
+				    const int pos[EDAC_MAX_LAYERS],
+				    const u16 count)
+{
+	int i, index = 0;
+
+	mci->ue_mc += count;
+
+	if (!enable_per_layer_report) {
+		mci->ue_noinfo_count += count;
+		return;
+	}
+
+	for (i = 0; i < mci->n_layers; i++) {
+		if (pos[i] < 0)
+			break;
+		index += pos[i];
+		mci->ue_per_layer[i][index] += count;
+
+		if (i < mci->n_layers - 1)
+			index *= mci->layers[i + 1].size;
+	}
+}
+
+static void edac_ce_error(struct mem_ctl_info *mci,
+			  const u16 error_count,
+			  const int pos[EDAC_MAX_LAYERS],
+			  const char *msg,
+			  const char *location,
+			  const char *label,
+			  const char *detail,
+			  const char *other_detail,
+			  const bool enable_per_layer_report,
+			  const unsigned long page_frame_number,
+			  const unsigned long offset_in_page,
+			  long grain)
+{
+	unsigned long remapped_page;
+	char *msg_aux = "";
+
+	if (*msg)
+		msg_aux = " ";
+
+	if (edac_mc_get_log_ce()) {
+		if (other_detail && *other_detail)
+			edac_mc_printk(mci, KERN_WARNING,
+				       "%d CE %s%son %s (%s %s - %s)\n",
+				       error_count, msg, msg_aux, label,
+				       location, detail, other_detail);
+		else
+			edac_mc_printk(mci, KERN_WARNING,
+				       "%d CE %s%son %s (%s %s)\n",
+				       error_count, msg, msg_aux, label,
+				       location, detail);
+	}
+	edac_inc_ce_error(mci, enable_per_layer_report, pos, error_count);
+
+	if (mci->scrub_mode == SCRUB_SW_SRC) {
+		/*
+			* Some memory controllers (called MCs below) can remap
+			* memory so that it is still available at a different
+			* address when PCI devices map into memory.
+			* MC's that can't do this, lose the memory where PCI
+			* devices are mapped. This mapping is MC-dependent
+			* and so we call back into the MC driver for it to
+			* map the MC page to a physical (CPU) page which can
+			* then be mapped to a virtual page - which can then
+			* be scrubbed.
+			*/
+		remapped_page = mci->ctl_page_to_phys ?
+			mci->ctl_page_to_phys(mci, page_frame_number) :
+			page_frame_number;
+
+		edac_mc_scrub_block(remapped_page,
+					offset_in_page, grain);
+	}
+}
+
+static void edac_ue_error(struct mem_ctl_info *mci,
+			  const u16 error_count,
+			  const int pos[EDAC_MAX_LAYERS],
+			  const char *msg,
+			  const char *location,
+			  const char *label,
+			  const char *detail,
+			  const char *other_detail,
+			  const bool enable_per_layer_report)
+{
+	char *msg_aux = "";
+
+	if (*msg)
+		msg_aux = " ";
+
+	if (edac_mc_get_log_ue()) {
+		if (other_detail && *other_detail)
+			edac_mc_printk(mci, KERN_WARNING,
+				       "%d UE %s%son %s (%s %s - %s)\n",
+				       error_count, msg, msg_aux, label,
+				       location, detail, other_detail);
+		else
+			edac_mc_printk(mci, KERN_WARNING,
+				       "%d UE %s%son %s (%s %s)\n",
+				       error_count, msg, msg_aux, label,
+				       location, detail);
+	}
+
+	if (edac_mc_get_panic_on_ue()) {
+		if (other_detail && *other_detail)
+			panic("UE %s%son %s (%s%s - %s)\n",
+			      msg, msg_aux, label, location, detail, other_detail);
+		else
+			panic("UE %s%son %s (%s%s)\n",
+			      msg, msg_aux, label, location, detail);
+	}
+
+	edac_inc_ue_error(mci, enable_per_layer_report, pos, error_count);
+}
+
+void edac_raw_mc_handle_error(const enum hw_event_mc_err_type type,
+			      struct mem_ctl_info *mci,
+			      struct edac_raw_error_desc *e)
+{
+	char detail[80];
+	int pos[EDAC_MAX_LAYERS] = { e->top_layer, e->mid_layer, e->low_layer };
+
+	/* Memory type dependent details about the error */
+	if (type == HW_EVENT_ERR_CORRECTED) {
+		snprintf(detail, sizeof(detail),
+			"page:0x%lx offset:0x%lx grain:%ld syndrome:0x%lx",
+			e->page_frame_number, e->offset_in_page,
+			e->grain, e->syndrome);
+		edac_ce_error(mci, e->error_count, pos, e->msg, e->location, e->label,
+			      detail, e->other_detail, e->enable_per_layer_report,
+			      e->page_frame_number, e->offset_in_page, e->grain);
+	} else {
+		snprintf(detail, sizeof(detail),
+			"page:0x%lx offset:0x%lx grain:%ld",
+			e->page_frame_number, e->offset_in_page, e->grain);
+
+		edac_ue_error(mci, e->error_count, pos, e->msg, e->location, e->label,
+			      detail, e->other_detail, e->enable_per_layer_report);
+	}
+
+
+}
+EXPORT_SYMBOL_GPL(edac_raw_mc_handle_error);
+
+void edac_mc_handle_error(const enum hw_event_mc_err_type type,
+			  struct mem_ctl_info *mci,
+			  const u16 error_count,
+			  const unsigned long page_frame_number,
+			  const unsigned long offset_in_page,
+			  const unsigned long syndrome,
+			  const int top_layer,
+			  const int mid_layer,
+			  const int low_layer,
+			  const char *msg,
+			  const char *other_detail)
+{
+	char *p;
+	int row = -1, chan = -1;
+	int pos[EDAC_MAX_LAYERS] = { top_layer, mid_layer, low_layer };
+	int i, n_labels = 0;
+	u8 grain_bits;
+	struct edac_raw_error_desc *e = &mci->error_desc;
+
+	edac_dbg(3, "MC%d\n", mci->mc_idx);
+
+	/* Fills the error report buffer */
+	memset(e, 0, sizeof (*e));
+	e->error_count = error_count;
+	e->top_layer = top_layer;
+	e->mid_layer = mid_layer;
+	e->low_layer = low_layer;
+	e->page_frame_number = page_frame_number;
+	e->offset_in_page = offset_in_page;
+	e->syndrome = syndrome;
+	e->msg = msg;
+	e->other_detail = other_detail;
+
+	/*
+	 * Check if the event report is consistent and if the memory
+	 * location is known. If it is known, enable_per_layer_report will be
+	 * true, the DIMM(s) label info will be filled and the per-layer
+	 * error counters will be incremented.
+	 */
+	for (i = 0; i < mci->n_layers; i++) {
+		if (pos[i] >= (int)mci->layers[i].size) {
+
+			edac_mc_printk(mci, KERN_ERR,
+				       "INTERNAL ERROR: %s value is out of range (%d >= %d)\n",
+				       edac_layer_name[mci->layers[i].type],
+				       pos[i], mci->layers[i].size);
+			/*
+			 * Instead of just returning it, let's use what's
+			 * known about the error. The increment routines and
+			 * the DIMM filter logic will do the right thing by
+			 * pointing the likely damaged DIMMs.
+			 */
+			pos[i] = -1;
+		}
+		if (pos[i] >= 0)
+			e->enable_per_layer_report = true;
+	}
+
+	/*
+	 * Get the dimm label/grain that applies to the match criteria.
+	 * As the error algorithm may not be able to point to just one memory
+	 * stick, the logic here will get all possible labels that could
+	 * pottentially be affected by the error.
+	 * On FB-DIMM memory controllers, for uncorrected errors, it is common
+	 * to have only the MC channel and the MC dimm (also called "branch")
+	 * but the channel is not known, as the memory is arranged in pairs,
+	 * where each memory belongs to a separate channel within the same
+	 * branch.
+	 */
+	p = e->label;
+	*p = '\0';
+
+	for (i = 0; i < mci->tot_dimms; i++) {
+		struct dimm_info *dimm = mci->dimms[i];
+
+		if (top_layer >= 0 && top_layer != dimm->location[0])
+			continue;
+		if (mid_layer >= 0 && mid_layer != dimm->location[1])
+			continue;
+		if (low_layer >= 0 && low_layer != dimm->location[2])
+			continue;
+
+		/* get the max grain, over the error match range */
+		if (dimm->grain > e->grain)
+			e->grain = dimm->grain;
+
+		/*
+		 * If the error is memory-controller wide, there's no need to
+		 * seek for the affected DIMMs because the whole
+		 * channel/memory controller/...  may be affected.
+		 * Also, don't show errors for empty DIMM slots.
+		 */
+		if (e->enable_per_layer_report && dimm->nr_pages) {
+			if (n_labels >= EDAC_MAX_LABELS) {
+				e->enable_per_layer_report = false;
+				break;
+			}
+			n_labels++;
+			if (p != e->label) {
+				strcpy(p, OTHER_LABEL);
+				p += strlen(OTHER_LABEL);
+			}
+			strcpy(p, dimm->label);
+			p += strlen(p);
+			*p = '\0';
+
+			/*
+			 * get csrow/channel of the DIMM, in order to allow
+			 * incrementing the compat API counters
+			 */
+			edac_dbg(4, "%s csrows map: (%d,%d)\n",
+				 mci->csbased ? "rank" : "dimm",
+				 dimm->csrow, dimm->cschannel);
+			if (row == -1)
+				row = dimm->csrow;
+			else if (row >= 0 && row != dimm->csrow)
+				row = -2;
+
+			if (chan == -1)
+				chan = dimm->cschannel;
+			else if (chan >= 0 && chan != dimm->cschannel)
+				chan = -2;
+		}
+	}
+
+	if (!e->enable_per_layer_report) {
+		strcpy(e->label, "any memory");
+	} else {
+		edac_dbg(4, "csrow/channel to increment: (%d,%d)\n", row, chan);
+		if (p == e->label)
+			strcpy(e->label, "unknown memory");
+		if (type == HW_EVENT_ERR_CORRECTED) {
+			if (row >= 0) {
+				mci->csrows[row]->ce_count += error_count;
+				if (chan >= 0)
+					mci->csrows[row]->channels[chan]->ce_count += error_count;
+			}
+		} else
+			if (row >= 0)
+				mci->csrows[row]->ue_count += error_count;
+	}
+
+	/* Fill the RAM location data */
+	p = e->location;
+
+	for (i = 0; i < mci->n_layers; i++) {
+		if (pos[i] < 0)
+			continue;
+
+		p += sprintf(p, "%s:%d ",
+			     edac_layer_name[mci->layers[i].type],
+			     pos[i]);
+	}
+	if (p > e->location)
+		*(p - 1) = '\0';
+
+	/* Sanity-check driver-supplied grain value. */
+	if (WARN_ON_ONCE(!e->grain))
+		e->grain = 1;
+
+	grain_bits = fls_long(e->grain - 1);
+
+	/* Report the error via the trace interface */
+	if (IS_ENABLED(CONFIG_RAS))
+		trace_mc_event(type, e->msg, e->label, e->error_count,
+			       mci->mc_idx, e->top_layer, e->mid_layer,
+			       e->low_layer,
+			       (e->page_frame_number << PAGE_SHIFT) | e->offset_in_page,
+			       grain_bits, e->syndrome, e->other_detail);
+
+	edac_raw_mc_handle_error(type, mci, e);
+}
+EXPORT_SYMBOL_GPL(edac_mc_handle_error);
diff --git a/drivers/edac/edac_mc.h b/drivers/edac/edac_mc.h
new file mode 100644
index 000000000..4165e1599
--- /dev/null
+++ b/drivers/edac/edac_mc.h
@@ -0,0 +1,262 @@
+/*
+ * Defines, structures, APIs for edac_mc module
+ *
+ * (C) 2007 Linux Networx (http://lnxi.com)
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Written by Thayne Harbaugh
+ * Based on work by Dan Hollis <goemon at anime dot net> and others.
+ *	http://www.anime.net/~goemon/linux-ecc/
+ *
+ * NMI handling support added by
+ *     Dave Peterson <dsp@llnl.gov> <dave_peterson@pobox.com>
+ *
+ * Refactored for multi-source files:
+ *	Doug Thompson <norsk5@xmission.com>
+ *
+ * Please look at Documentation/driver-api/edac.rst for more info about
+ * EDAC core structs and functions.
+ */
+
+#ifndef _EDAC_MC_H_
+#define _EDAC_MC_H_
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/smp.h>
+#include <linux/pci.h>
+#include <linux/time.h>
+#include <linux/nmi.h>
+#include <linux/rcupdate.h>
+#include <linux/completion.h>
+#include <linux/kobject.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/edac.h>
+
+#if PAGE_SHIFT < 20
+#define PAGES_TO_MiB(pages)	((pages) >> (20 - PAGE_SHIFT))
+#define MiB_TO_PAGES(mb)	((mb) << (20 - PAGE_SHIFT))
+#else				/* PAGE_SHIFT > 20 */
+#define PAGES_TO_MiB(pages)	((pages) << (PAGE_SHIFT - 20))
+#define MiB_TO_PAGES(mb)	((mb) >> (PAGE_SHIFT - 20))
+#endif
+
+#define edac_printk(level, prefix, fmt, arg...) \
+	printk(level "EDAC " prefix ": " fmt, ##arg)
+
+#define edac_mc_printk(mci, level, fmt, arg...) \
+	printk(level "EDAC MC%d: " fmt, mci->mc_idx, ##arg)
+
+#define edac_mc_chipset_printk(mci, level, prefix, fmt, arg...) \
+	printk(level "EDAC " prefix " MC%d: " fmt, mci->mc_idx, ##arg)
+
+#define edac_device_printk(ctl, level, fmt, arg...) \
+	printk(level "EDAC DEVICE%d: " fmt, ctl->dev_idx, ##arg)
+
+#define edac_pci_printk(ctl, level, fmt, arg...) \
+	printk(level "EDAC PCI%d: " fmt, ctl->pci_idx, ##arg)
+
+/* prefixes for edac_printk() and edac_mc_printk() */
+#define EDAC_MC "MC"
+#define EDAC_PCI "PCI"
+#define EDAC_DEBUG "DEBUG"
+
+extern const char * const edac_mem_types[];
+
+#ifdef CONFIG_EDAC_DEBUG
+extern int edac_debug_level;
+
+#define edac_dbg(level, fmt, ...)					\
+do {									\
+	if (level <= edac_debug_level)					\
+		edac_printk(KERN_DEBUG, EDAC_DEBUG,			\
+			    "%s: " fmt, __func__, ##__VA_ARGS__);	\
+} while (0)
+
+#else				/* !CONFIG_EDAC_DEBUG */
+
+#define edac_dbg(level, fmt, ...)					\
+do {									\
+	if (0)								\
+		edac_printk(KERN_DEBUG, EDAC_DEBUG,			\
+			    "%s: " fmt, __func__, ##__VA_ARGS__);	\
+} while (0)
+
+#endif				/* !CONFIG_EDAC_DEBUG */
+
+#define PCI_VEND_DEV(vend, dev) PCI_VENDOR_ID_ ## vend, \
+	PCI_DEVICE_ID_ ## vend ## _ ## dev
+
+#define edac_dev_name(dev) (dev)->dev_name
+
+#define to_mci(k) container_of(k, struct mem_ctl_info, dev)
+
+/**
+ * edac_mc_alloc() - Allocate and partially fill a struct &mem_ctl_info.
+ *
+ * @mc_num:		Memory controller number
+ * @n_layers:		Number of MC hierarchy layers
+ * @layers:		Describes each layer as seen by the Memory Controller
+ * @sz_pvt:		size of private storage needed
+ *
+ *
+ * Everything is kmalloc'ed as one big chunk - more efficient.
+ * Only can be used if all structures have the same lifetime - otherwise
+ * you have to allocate and initialize your own structures.
+ *
+ * Use edac_mc_free() to free mc structures allocated by this function.
+ *
+ * .. note::
+ *
+ *   drivers handle multi-rank memories in different ways: in some
+ *   drivers, one multi-rank memory stick is mapped as one entry, while, in
+ *   others, a single multi-rank memory stick would be mapped into several
+ *   entries. Currently, this function will allocate multiple struct dimm_info
+ *   on such scenarios, as grouping the multiple ranks require drivers change.
+ *
+ * Returns:
+ *	On success, return a pointer to struct mem_ctl_info pointer;
+ *	%NULL otherwise
+ */
+struct mem_ctl_info *edac_mc_alloc(unsigned mc_num,
+				   unsigned n_layers,
+				   struct edac_mc_layer *layers,
+				   unsigned sz_pvt);
+
+/**
+ * edac_get_owner - Return the owner's mod_name of EDAC MC
+ *
+ * Returns:
+ *	Pointer to mod_name string when EDAC MC is owned. NULL otherwise.
+ */
+extern const char *edac_get_owner(void);
+
+/*
+ * edac_mc_add_mc_with_groups() - Insert the @mci structure into the mci
+ *	global list and create sysfs entries associated with @mci structure.
+ *
+ * @mci: pointer to the mci structure to be added to the list
+ * @groups: optional attribute groups for the driver-specific sysfs entries
+ *
+ * Returns:
+ *	0 on Success, or an error code on failure
+ */
+extern int edac_mc_add_mc_with_groups(struct mem_ctl_info *mci,
+				      const struct attribute_group **groups);
+#define edac_mc_add_mc(mci)	edac_mc_add_mc_with_groups(mci, NULL)
+
+/**
+ * edac_mc_free() -  Frees a previously allocated @mci structure
+ *
+ * @mci: pointer to a struct mem_ctl_info structure
+ */
+extern void edac_mc_free(struct mem_ctl_info *mci);
+
+/**
+ * edac_has_mcs() - Check if any MCs have been allocated.
+ *
+ * Returns:
+ *	True if MC instances have been registered successfully.
+ *	False otherwise.
+ */
+extern bool edac_has_mcs(void);
+
+/**
+ * edac_mc_find() - Search for a mem_ctl_info structure whose index is @idx.
+ *
+ * @idx: index to be seek
+ *
+ * If found, return a pointer to the structure.
+ * Else return NULL.
+ */
+extern struct mem_ctl_info *edac_mc_find(int idx);
+
+/**
+ * find_mci_by_dev() - Scan list of controllers looking for the one that
+ *	manages the @dev device.
+ *
+ * @dev: pointer to a struct device related with the MCI
+ *
+ * Returns: on success, returns a pointer to struct &mem_ctl_info;
+ * %NULL otherwise.
+ */
+extern struct mem_ctl_info *find_mci_by_dev(struct device *dev);
+
+/**
+ * edac_mc_del_mc() - Remove sysfs entries for mci structure associated with
+ *	@dev and remove mci structure from global list.
+ *
+ * @dev: Pointer to struct &device representing mci structure to remove.
+ *
+ * Returns: pointer to removed mci structure, or %NULL if device not found.
+ */
+extern struct mem_ctl_info *edac_mc_del_mc(struct device *dev);
+
+/**
+ * edac_mc_find_csrow_by_page() - Ancillary routine to identify what csrow
+ *	contains a memory page.
+ *
+ * @mci: pointer to a struct mem_ctl_info structure
+ * @page: memory page to find
+ *
+ * Returns: on success, returns the csrow. -1 if not found.
+ */
+extern int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci,
+				      unsigned long page);
+
+/**
+ * edac_raw_mc_handle_error() - Reports a memory event to userspace without
+ *	doing anything to discover the error location.
+ *
+ * @type:		severity of the error (CE/UE/Fatal)
+ * @mci:		a struct mem_ctl_info pointer
+ * @e:			error description
+ *
+ * This raw function is used internally by edac_mc_handle_error(). It should
+ * only be called directly when the hardware error come directly from BIOS,
+ * like in the case of APEI GHES driver.
+ */
+void edac_raw_mc_handle_error(const enum hw_event_mc_err_type type,
+			      struct mem_ctl_info *mci,
+			      struct edac_raw_error_desc *e);
+
+/**
+ * edac_mc_handle_error() - Reports a memory event to userspace.
+ *
+ * @type:		severity of the error (CE/UE/Fatal)
+ * @mci:		a struct mem_ctl_info pointer
+ * @error_count:	Number of errors of the same type
+ * @page_frame_number:	mem page where the error occurred
+ * @offset_in_page:	offset of the error inside the page
+ * @syndrome:		ECC syndrome
+ * @top_layer:		Memory layer[0] position
+ * @mid_layer:		Memory layer[1] position
+ * @low_layer:		Memory layer[2] position
+ * @msg:		Message meaningful to the end users that
+ *			explains the event
+ * @other_detail:	Technical details about the event that
+ *			may help hardware manufacturers and
+ *			EDAC developers to analyse the event
+ */
+void edac_mc_handle_error(const enum hw_event_mc_err_type type,
+			  struct mem_ctl_info *mci,
+			  const u16 error_count,
+			  const unsigned long page_frame_number,
+			  const unsigned long offset_in_page,
+			  const unsigned long syndrome,
+			  const int top_layer,
+			  const int mid_layer,
+			  const int low_layer,
+			  const char *msg,
+			  const char *other_detail);
+
+/*
+ * edac misc APIs
+ */
+extern char *edac_op_state_to_string(int op_state);
+
+#endif				/* _EDAC_MC_H_ */
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
new file mode 100644
index 000000000..d4545a922
--- /dev/null
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -0,0 +1,1099 @@
+/*
+ * edac_mc kernel module
+ * (C) 2005-2007 Linux Networx (http://lnxi.com)
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Written Doug Thompson <norsk5@xmission.com> www.softwarebitmaker.com
+ *
+ * (c) 2012-2013 - Mauro Carvalho Chehab
+ *	The entire API were re-written, and ported to use struct device
+ *
+ */
+
+#include <linux/ctype.h>
+#include <linux/slab.h>
+#include <linux/edac.h>
+#include <linux/bug.h>
+#include <linux/pm_runtime.h>
+#include <linux/uaccess.h>
+
+#include "edac_mc.h"
+#include "edac_module.h"
+
+/* MC EDAC Controls, setable by module parameter, and sysfs */
+static int edac_mc_log_ue = 1;
+static int edac_mc_log_ce = 1;
+static int edac_mc_panic_on_ue;
+static unsigned int edac_mc_poll_msec = 1000;
+
+/* Getter functions for above */
+int edac_mc_get_log_ue(void)
+{
+	return edac_mc_log_ue;
+}
+
+int edac_mc_get_log_ce(void)
+{
+	return edac_mc_log_ce;
+}
+
+int edac_mc_get_panic_on_ue(void)
+{
+	return edac_mc_panic_on_ue;
+}
+
+/* this is temporary */
+unsigned int edac_mc_get_poll_msec(void)
+{
+	return edac_mc_poll_msec;
+}
+
+static int edac_set_poll_msec(const char *val, const struct kernel_param *kp)
+{
+	unsigned int i;
+	int ret;
+
+	if (!val)
+		return -EINVAL;
+
+	ret = kstrtouint(val, 0, &i);
+	if (ret)
+		return ret;
+
+	if (i < 1000)
+		return -EINVAL;
+
+	*((unsigned int *)kp->arg) = i;
+
+	/* notify edac_mc engine to reset the poll period */
+	edac_mc_reset_delay_period(i);
+
+	return 0;
+}
+
+/* Parameter declarations for above */
+module_param(edac_mc_panic_on_ue, int, 0644);
+MODULE_PARM_DESC(edac_mc_panic_on_ue, "Panic on uncorrected error: 0=off 1=on");
+module_param(edac_mc_log_ue, int, 0644);
+MODULE_PARM_DESC(edac_mc_log_ue,
+		 "Log uncorrectable error to console: 0=off 1=on");
+module_param(edac_mc_log_ce, int, 0644);
+MODULE_PARM_DESC(edac_mc_log_ce,
+		 "Log correctable error to console: 0=off 1=on");
+module_param_call(edac_mc_poll_msec, edac_set_poll_msec, param_get_uint,
+		  &edac_mc_poll_msec, 0644);
+MODULE_PARM_DESC(edac_mc_poll_msec, "Polling period in milliseconds");
+
+static struct device *mci_pdev;
+
+/*
+ * various constants for Memory Controllers
+ */
+static const char * const dev_types[] = {
+	[DEV_UNKNOWN] = "Unknown",
+	[DEV_X1] = "x1",
+	[DEV_X2] = "x2",
+	[DEV_X4] = "x4",
+	[DEV_X8] = "x8",
+	[DEV_X16] = "x16",
+	[DEV_X32] = "x32",
+	[DEV_X64] = "x64"
+};
+
+static const char * const edac_caps[] = {
+	[EDAC_UNKNOWN] = "Unknown",
+	[EDAC_NONE] = "None",
+	[EDAC_RESERVED] = "Reserved",
+	[EDAC_PARITY] = "PARITY",
+	[EDAC_EC] = "EC",
+	[EDAC_SECDED] = "SECDED",
+	[EDAC_S2ECD2ED] = "S2ECD2ED",
+	[EDAC_S4ECD4ED] = "S4ECD4ED",
+	[EDAC_S8ECD8ED] = "S8ECD8ED",
+	[EDAC_S16ECD16ED] = "S16ECD16ED"
+};
+
+#ifdef CONFIG_EDAC_LEGACY_SYSFS
+/*
+ * EDAC sysfs CSROW data structures and methods
+ */
+
+#define to_csrow(k) container_of(k, struct csrow_info, dev)
+
+/*
+ * We need it to avoid namespace conflicts between the legacy API
+ * and the per-dimm/per-rank one
+ */
+#define DEVICE_ATTR_LEGACY(_name, _mode, _show, _store) \
+	static struct device_attribute dev_attr_legacy_##_name = __ATTR(_name, _mode, _show, _store)
+
+struct dev_ch_attribute {
+	struct device_attribute attr;
+	int channel;
+};
+
+#define DEVICE_CHANNEL(_name, _mode, _show, _store, _var) \
+	static struct dev_ch_attribute dev_attr_legacy_##_name = \
+		{ __ATTR(_name, _mode, _show, _store), (_var) }
+
+#define to_channel(k) (container_of(k, struct dev_ch_attribute, attr)->channel)
+
+/* Set of more default csrow<id> attribute show/store functions */
+static ssize_t csrow_ue_count_show(struct device *dev,
+				   struct device_attribute *mattr, char *data)
+{
+	struct csrow_info *csrow = to_csrow(dev);
+
+	return sprintf(data, "%u\n", csrow->ue_count);
+}
+
+static ssize_t csrow_ce_count_show(struct device *dev,
+				   struct device_attribute *mattr, char *data)
+{
+	struct csrow_info *csrow = to_csrow(dev);
+
+	return sprintf(data, "%u\n", csrow->ce_count);
+}
+
+static ssize_t csrow_size_show(struct device *dev,
+			       struct device_attribute *mattr, char *data)
+{
+	struct csrow_info *csrow = to_csrow(dev);
+	int i;
+	u32 nr_pages = 0;
+
+	for (i = 0; i < csrow->nr_channels; i++)
+		nr_pages += csrow->channels[i]->dimm->nr_pages;
+	return sprintf(data, "%u\n", PAGES_TO_MiB(nr_pages));
+}
+
+static ssize_t csrow_mem_type_show(struct device *dev,
+				   struct device_attribute *mattr, char *data)
+{
+	struct csrow_info *csrow = to_csrow(dev);
+
+	return sprintf(data, "%s\n", edac_mem_types[csrow->channels[0]->dimm->mtype]);
+}
+
+static ssize_t csrow_dev_type_show(struct device *dev,
+				   struct device_attribute *mattr, char *data)
+{
+	struct csrow_info *csrow = to_csrow(dev);
+
+	return sprintf(data, "%s\n", dev_types[csrow->channels[0]->dimm->dtype]);
+}
+
+static ssize_t csrow_edac_mode_show(struct device *dev,
+				    struct device_attribute *mattr,
+				    char *data)
+{
+	struct csrow_info *csrow = to_csrow(dev);
+
+	return sprintf(data, "%s\n", edac_caps[csrow->channels[0]->dimm->edac_mode]);
+}
+
+/* show/store functions for DIMM Label attributes */
+static ssize_t channel_dimm_label_show(struct device *dev,
+				       struct device_attribute *mattr,
+				       char *data)
+{
+	struct csrow_info *csrow = to_csrow(dev);
+	unsigned chan = to_channel(mattr);
+	struct rank_info *rank = csrow->channels[chan];
+
+	/* if field has not been initialized, there is nothing to send */
+	if (!rank->dimm->label[0])
+		return 0;
+
+	return snprintf(data, sizeof(rank->dimm->label) + 1, "%s\n",
+			rank->dimm->label);
+}
+
+static ssize_t channel_dimm_label_store(struct device *dev,
+					struct device_attribute *mattr,
+					const char *data, size_t count)
+{
+	struct csrow_info *csrow = to_csrow(dev);
+	unsigned chan = to_channel(mattr);
+	struct rank_info *rank = csrow->channels[chan];
+	size_t copy_count = count;
+
+	if (count == 0)
+		return -EINVAL;
+
+	if (data[count - 1] == '\0' || data[count - 1] == '\n')
+		copy_count -= 1;
+
+	if (copy_count == 0 || copy_count >= sizeof(rank->dimm->label))
+		return -EINVAL;
+
+	strncpy(rank->dimm->label, data, copy_count);
+	rank->dimm->label[copy_count] = '\0';
+
+	return count;
+}
+
+/* show function for dynamic chX_ce_count attribute */
+static ssize_t channel_ce_count_show(struct device *dev,
+				     struct device_attribute *mattr, char *data)
+{
+	struct csrow_info *csrow = to_csrow(dev);
+	unsigned chan = to_channel(mattr);
+	struct rank_info *rank = csrow->channels[chan];
+
+	return sprintf(data, "%u\n", rank->ce_count);
+}
+
+/* cwrow<id>/attribute files */
+DEVICE_ATTR_LEGACY(size_mb, S_IRUGO, csrow_size_show, NULL);
+DEVICE_ATTR_LEGACY(dev_type, S_IRUGO, csrow_dev_type_show, NULL);
+DEVICE_ATTR_LEGACY(mem_type, S_IRUGO, csrow_mem_type_show, NULL);
+DEVICE_ATTR_LEGACY(edac_mode, S_IRUGO, csrow_edac_mode_show, NULL);
+DEVICE_ATTR_LEGACY(ue_count, S_IRUGO, csrow_ue_count_show, NULL);
+DEVICE_ATTR_LEGACY(ce_count, S_IRUGO, csrow_ce_count_show, NULL);
+
+/* default attributes of the CSROW<id> object */
+static struct attribute *csrow_attrs[] = {
+	&dev_attr_legacy_dev_type.attr,
+	&dev_attr_legacy_mem_type.attr,
+	&dev_attr_legacy_edac_mode.attr,
+	&dev_attr_legacy_size_mb.attr,
+	&dev_attr_legacy_ue_count.attr,
+	&dev_attr_legacy_ce_count.attr,
+	NULL,
+};
+
+static const struct attribute_group csrow_attr_grp = {
+	.attrs	= csrow_attrs,
+};
+
+static const struct attribute_group *csrow_attr_groups[] = {
+	&csrow_attr_grp,
+	NULL
+};
+
+static void csrow_attr_release(struct device *dev)
+{
+	struct csrow_info *csrow = container_of(dev, struct csrow_info, dev);
+
+	edac_dbg(1, "Releasing csrow device %s\n", dev_name(dev));
+	kfree(csrow);
+}
+
+static const struct device_type csrow_attr_type = {
+	.groups		= csrow_attr_groups,
+	.release	= csrow_attr_release,
+};
+
+/*
+ * possible dynamic channel DIMM Label attribute files
+ *
+ */
+DEVICE_CHANNEL(ch0_dimm_label, S_IRUGO | S_IWUSR,
+	channel_dimm_label_show, channel_dimm_label_store, 0);
+DEVICE_CHANNEL(ch1_dimm_label, S_IRUGO | S_IWUSR,
+	channel_dimm_label_show, channel_dimm_label_store, 1);
+DEVICE_CHANNEL(ch2_dimm_label, S_IRUGO | S_IWUSR,
+	channel_dimm_label_show, channel_dimm_label_store, 2);
+DEVICE_CHANNEL(ch3_dimm_label, S_IRUGO | S_IWUSR,
+	channel_dimm_label_show, channel_dimm_label_store, 3);
+DEVICE_CHANNEL(ch4_dimm_label, S_IRUGO | S_IWUSR,
+	channel_dimm_label_show, channel_dimm_label_store, 4);
+DEVICE_CHANNEL(ch5_dimm_label, S_IRUGO | S_IWUSR,
+	channel_dimm_label_show, channel_dimm_label_store, 5);
+DEVICE_CHANNEL(ch6_dimm_label, S_IRUGO | S_IWUSR,
+	channel_dimm_label_show, channel_dimm_label_store, 6);
+DEVICE_CHANNEL(ch7_dimm_label, S_IRUGO | S_IWUSR,
+	channel_dimm_label_show, channel_dimm_label_store, 7);
+
+/* Total possible dynamic DIMM Label attribute file table */
+static struct attribute *dynamic_csrow_dimm_attr[] = {
+	&dev_attr_legacy_ch0_dimm_label.attr.attr,
+	&dev_attr_legacy_ch1_dimm_label.attr.attr,
+	&dev_attr_legacy_ch2_dimm_label.attr.attr,
+	&dev_attr_legacy_ch3_dimm_label.attr.attr,
+	&dev_attr_legacy_ch4_dimm_label.attr.attr,
+	&dev_attr_legacy_ch5_dimm_label.attr.attr,
+	&dev_attr_legacy_ch6_dimm_label.attr.attr,
+	&dev_attr_legacy_ch7_dimm_label.attr.attr,
+	NULL
+};
+
+/* possible dynamic channel ce_count attribute files */
+DEVICE_CHANNEL(ch0_ce_count, S_IRUGO,
+		   channel_ce_count_show, NULL, 0);
+DEVICE_CHANNEL(ch1_ce_count, S_IRUGO,
+		   channel_ce_count_show, NULL, 1);
+DEVICE_CHANNEL(ch2_ce_count, S_IRUGO,
+		   channel_ce_count_show, NULL, 2);
+DEVICE_CHANNEL(ch3_ce_count, S_IRUGO,
+		   channel_ce_count_show, NULL, 3);
+DEVICE_CHANNEL(ch4_ce_count, S_IRUGO,
+		   channel_ce_count_show, NULL, 4);
+DEVICE_CHANNEL(ch5_ce_count, S_IRUGO,
+		   channel_ce_count_show, NULL, 5);
+DEVICE_CHANNEL(ch6_ce_count, S_IRUGO,
+		   channel_ce_count_show, NULL, 6);
+DEVICE_CHANNEL(ch7_ce_count, S_IRUGO,
+		   channel_ce_count_show, NULL, 7);
+
+/* Total possible dynamic ce_count attribute file table */
+static struct attribute *dynamic_csrow_ce_count_attr[] = {
+	&dev_attr_legacy_ch0_ce_count.attr.attr,
+	&dev_attr_legacy_ch1_ce_count.attr.attr,
+	&dev_attr_legacy_ch2_ce_count.attr.attr,
+	&dev_attr_legacy_ch3_ce_count.attr.attr,
+	&dev_attr_legacy_ch4_ce_count.attr.attr,
+	&dev_attr_legacy_ch5_ce_count.attr.attr,
+	&dev_attr_legacy_ch6_ce_count.attr.attr,
+	&dev_attr_legacy_ch7_ce_count.attr.attr,
+	NULL
+};
+
+static umode_t csrow_dev_is_visible(struct kobject *kobj,
+				    struct attribute *attr, int idx)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct csrow_info *csrow = container_of(dev, struct csrow_info, dev);
+
+	if (idx >= csrow->nr_channels)
+		return 0;
+
+	if (idx >= ARRAY_SIZE(dynamic_csrow_ce_count_attr) - 1) {
+		WARN_ONCE(1, "idx: %d\n", idx);
+		return 0;
+	}
+
+	/* Only expose populated DIMMs */
+	if (!csrow->channels[idx]->dimm->nr_pages)
+		return 0;
+
+	return attr->mode;
+}
+
+
+static const struct attribute_group csrow_dev_dimm_group = {
+	.attrs = dynamic_csrow_dimm_attr,
+	.is_visible = csrow_dev_is_visible,
+};
+
+static const struct attribute_group csrow_dev_ce_count_group = {
+	.attrs = dynamic_csrow_ce_count_attr,
+	.is_visible = csrow_dev_is_visible,
+};
+
+static const struct attribute_group *csrow_dev_groups[] = {
+	&csrow_dev_dimm_group,
+	&csrow_dev_ce_count_group,
+	NULL
+};
+
+static inline int nr_pages_per_csrow(struct csrow_info *csrow)
+{
+	int chan, nr_pages = 0;
+
+	for (chan = 0; chan < csrow->nr_channels; chan++)
+		nr_pages += csrow->channels[chan]->dimm->nr_pages;
+
+	return nr_pages;
+}
+
+/* Create a CSROW object under specifed edac_mc_device */
+static int edac_create_csrow_object(struct mem_ctl_info *mci,
+				    struct csrow_info *csrow, int index)
+{
+	int err;
+
+	csrow->dev.type = &csrow_attr_type;
+	csrow->dev.bus = mci->bus;
+	csrow->dev.groups = csrow_dev_groups;
+	device_initialize(&csrow->dev);
+	csrow->dev.parent = &mci->dev;
+	csrow->mci = mci;
+	dev_set_name(&csrow->dev, "csrow%d", index);
+	dev_set_drvdata(&csrow->dev, csrow);
+
+	edac_dbg(0, "creating (virtual) csrow node %s\n",
+		 dev_name(&csrow->dev));
+
+	err = device_add(&csrow->dev);
+	if (err)
+		put_device(&csrow->dev);
+
+	return err;
+}
+
+/* Create a CSROW object under specifed edac_mc_device */
+static int edac_create_csrow_objects(struct mem_ctl_info *mci)
+{
+	int err, i;
+	struct csrow_info *csrow;
+
+	for (i = 0; i < mci->nr_csrows; i++) {
+		csrow = mci->csrows[i];
+		if (!nr_pages_per_csrow(csrow))
+			continue;
+		err = edac_create_csrow_object(mci, mci->csrows[i], i);
+		if (err < 0) {
+			edac_dbg(1,
+				 "failure: create csrow objects for csrow %d\n",
+				 i);
+			goto error;
+		}
+	}
+	return 0;
+
+error:
+	for (--i; i >= 0; i--) {
+		csrow = mci->csrows[i];
+		if (!nr_pages_per_csrow(csrow))
+			continue;
+		put_device(&mci->csrows[i]->dev);
+	}
+
+	return err;
+}
+
+static void edac_delete_csrow_objects(struct mem_ctl_info *mci)
+{
+	int i;
+	struct csrow_info *csrow;
+
+	for (i = mci->nr_csrows - 1; i >= 0; i--) {
+		csrow = mci->csrows[i];
+		if (!nr_pages_per_csrow(csrow))
+			continue;
+		device_unregister(&mci->csrows[i]->dev);
+	}
+}
+#endif
+
+/*
+ * Per-dimm (or per-rank) devices
+ */
+
+#define to_dimm(k) container_of(k, struct dimm_info, dev)
+
+/* show/store functions for DIMM Label attributes */
+static ssize_t dimmdev_location_show(struct device *dev,
+				     struct device_attribute *mattr, char *data)
+{
+	struct dimm_info *dimm = to_dimm(dev);
+
+	return edac_dimm_info_location(dimm, data, PAGE_SIZE);
+}
+
+static ssize_t dimmdev_label_show(struct device *dev,
+				  struct device_attribute *mattr, char *data)
+{
+	struct dimm_info *dimm = to_dimm(dev);
+
+	/* if field has not been initialized, there is nothing to send */
+	if (!dimm->label[0])
+		return 0;
+
+	return snprintf(data, sizeof(dimm->label) + 1, "%s\n", dimm->label);
+}
+
+static ssize_t dimmdev_label_store(struct device *dev,
+				   struct device_attribute *mattr,
+				   const char *data,
+				   size_t count)
+{
+	struct dimm_info *dimm = to_dimm(dev);
+	size_t copy_count = count;
+
+	if (count == 0)
+		return -EINVAL;
+
+	if (data[count - 1] == '\0' || data[count - 1] == '\n')
+		copy_count -= 1;
+
+	if (copy_count == 0 || copy_count >= sizeof(dimm->label))
+		return -EINVAL;
+
+	strncpy(dimm->label, data, copy_count);
+	dimm->label[copy_count] = '\0';
+
+	return count;
+}
+
+static ssize_t dimmdev_size_show(struct device *dev,
+				 struct device_attribute *mattr, char *data)
+{
+	struct dimm_info *dimm = to_dimm(dev);
+
+	return sprintf(data, "%u\n", PAGES_TO_MiB(dimm->nr_pages));
+}
+
+static ssize_t dimmdev_mem_type_show(struct device *dev,
+				     struct device_attribute *mattr, char *data)
+{
+	struct dimm_info *dimm = to_dimm(dev);
+
+	return sprintf(data, "%s\n", edac_mem_types[dimm->mtype]);
+}
+
+static ssize_t dimmdev_dev_type_show(struct device *dev,
+				     struct device_attribute *mattr, char *data)
+{
+	struct dimm_info *dimm = to_dimm(dev);
+
+	return sprintf(data, "%s\n", dev_types[dimm->dtype]);
+}
+
+static ssize_t dimmdev_edac_mode_show(struct device *dev,
+				      struct device_attribute *mattr,
+				      char *data)
+{
+	struct dimm_info *dimm = to_dimm(dev);
+
+	return sprintf(data, "%s\n", edac_caps[dimm->edac_mode]);
+}
+
+static ssize_t dimmdev_ce_count_show(struct device *dev,
+				      struct device_attribute *mattr,
+				      char *data)
+{
+	struct dimm_info *dimm = to_dimm(dev);
+	u32 count;
+	int off;
+
+	off = EDAC_DIMM_OFF(dimm->mci->layers,
+			    dimm->mci->n_layers,
+			    dimm->location[0],
+			    dimm->location[1],
+			    dimm->location[2]);
+	count = dimm->mci->ce_per_layer[dimm->mci->n_layers-1][off];
+	return sprintf(data, "%u\n", count);
+}
+
+static ssize_t dimmdev_ue_count_show(struct device *dev,
+				      struct device_attribute *mattr,
+				      char *data)
+{
+	struct dimm_info *dimm = to_dimm(dev);
+	u32 count;
+	int off;
+
+	off = EDAC_DIMM_OFF(dimm->mci->layers,
+			    dimm->mci->n_layers,
+			    dimm->location[0],
+			    dimm->location[1],
+			    dimm->location[2]);
+	count = dimm->mci->ue_per_layer[dimm->mci->n_layers-1][off];
+	return sprintf(data, "%u\n", count);
+}
+
+/* dimm/rank attribute files */
+static DEVICE_ATTR(dimm_label, S_IRUGO | S_IWUSR,
+		   dimmdev_label_show, dimmdev_label_store);
+static DEVICE_ATTR(dimm_location, S_IRUGO, dimmdev_location_show, NULL);
+static DEVICE_ATTR(size, S_IRUGO, dimmdev_size_show, NULL);
+static DEVICE_ATTR(dimm_mem_type, S_IRUGO, dimmdev_mem_type_show, NULL);
+static DEVICE_ATTR(dimm_dev_type, S_IRUGO, dimmdev_dev_type_show, NULL);
+static DEVICE_ATTR(dimm_edac_mode, S_IRUGO, dimmdev_edac_mode_show, NULL);
+static DEVICE_ATTR(dimm_ce_count, S_IRUGO, dimmdev_ce_count_show, NULL);
+static DEVICE_ATTR(dimm_ue_count, S_IRUGO, dimmdev_ue_count_show, NULL);
+
+/* attributes of the dimm<id>/rank<id> object */
+static struct attribute *dimm_attrs[] = {
+	&dev_attr_dimm_label.attr,
+	&dev_attr_dimm_location.attr,
+	&dev_attr_size.attr,
+	&dev_attr_dimm_mem_type.attr,
+	&dev_attr_dimm_dev_type.attr,
+	&dev_attr_dimm_edac_mode.attr,
+	&dev_attr_dimm_ce_count.attr,
+	&dev_attr_dimm_ue_count.attr,
+	NULL,
+};
+
+static const struct attribute_group dimm_attr_grp = {
+	.attrs	= dimm_attrs,
+};
+
+static const struct attribute_group *dimm_attr_groups[] = {
+	&dimm_attr_grp,
+	NULL
+};
+
+static void dimm_attr_release(struct device *dev)
+{
+	struct dimm_info *dimm = container_of(dev, struct dimm_info, dev);
+
+	edac_dbg(1, "Releasing dimm device %s\n", dev_name(dev));
+	kfree(dimm);
+}
+
+static const struct device_type dimm_attr_type = {
+	.groups		= dimm_attr_groups,
+	.release	= dimm_attr_release,
+};
+
+/* Create a DIMM object under specifed memory controller device */
+static int edac_create_dimm_object(struct mem_ctl_info *mci,
+				   struct dimm_info *dimm,
+				   int index)
+{
+	int err;
+	dimm->mci = mci;
+
+	dimm->dev.type = &dimm_attr_type;
+	dimm->dev.bus = mci->bus;
+	device_initialize(&dimm->dev);
+
+	dimm->dev.parent = &mci->dev;
+	if (mci->csbased)
+		dev_set_name(&dimm->dev, "rank%d", index);
+	else
+		dev_set_name(&dimm->dev, "dimm%d", index);
+	dev_set_drvdata(&dimm->dev, dimm);
+	pm_runtime_forbid(&mci->dev);
+
+	err =  device_add(&dimm->dev);
+
+	edac_dbg(0, "creating rank/dimm device %s\n", dev_name(&dimm->dev));
+
+	return err;
+}
+
+/*
+ * Memory controller device
+ */
+
+#define to_mci(k) container_of(k, struct mem_ctl_info, dev)
+
+static ssize_t mci_reset_counters_store(struct device *dev,
+					struct device_attribute *mattr,
+					const char *data, size_t count)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	int cnt, row, chan, i;
+	mci->ue_mc = 0;
+	mci->ce_mc = 0;
+	mci->ue_noinfo_count = 0;
+	mci->ce_noinfo_count = 0;
+
+	for (row = 0; row < mci->nr_csrows; row++) {
+		struct csrow_info *ri = mci->csrows[row];
+
+		ri->ue_count = 0;
+		ri->ce_count = 0;
+
+		for (chan = 0; chan < ri->nr_channels; chan++)
+			ri->channels[chan]->ce_count = 0;
+	}
+
+	cnt = 1;
+	for (i = 0; i < mci->n_layers; i++) {
+		cnt *= mci->layers[i].size;
+		memset(mci->ce_per_layer[i], 0, cnt * sizeof(u32));
+		memset(mci->ue_per_layer[i], 0, cnt * sizeof(u32));
+	}
+
+	mci->start_time = jiffies;
+	return count;
+}
+
+/* Memory scrubbing interface:
+ *
+ * A MC driver can limit the scrubbing bandwidth based on the CPU type.
+ * Therefore, ->set_sdram_scrub_rate should be made to return the actual
+ * bandwidth that is accepted or 0 when scrubbing is to be disabled.
+ *
+ * Negative value still means that an error has occurred while setting
+ * the scrub rate.
+ */
+static ssize_t mci_sdram_scrub_rate_store(struct device *dev,
+					  struct device_attribute *mattr,
+					  const char *data, size_t count)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	unsigned long bandwidth = 0;
+	int new_bw = 0;
+
+	if (kstrtoul(data, 10, &bandwidth) < 0)
+		return -EINVAL;
+
+	new_bw = mci->set_sdram_scrub_rate(mci, bandwidth);
+	if (new_bw < 0) {
+		edac_printk(KERN_WARNING, EDAC_MC,
+			    "Error setting scrub rate to: %lu\n", bandwidth);
+		return -EINVAL;
+	}
+
+	return count;
+}
+
+/*
+ * ->get_sdram_scrub_rate() return value semantics same as above.
+ */
+static ssize_t mci_sdram_scrub_rate_show(struct device *dev,
+					 struct device_attribute *mattr,
+					 char *data)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	int bandwidth = 0;
+
+	bandwidth = mci->get_sdram_scrub_rate(mci);
+	if (bandwidth < 0) {
+		edac_printk(KERN_DEBUG, EDAC_MC, "Error reading scrub rate\n");
+		return bandwidth;
+	}
+
+	return sprintf(data, "%d\n", bandwidth);
+}
+
+/* default attribute files for the MCI object */
+static ssize_t mci_ue_count_show(struct device *dev,
+				 struct device_attribute *mattr,
+				 char *data)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+
+	return sprintf(data, "%d\n", mci->ue_mc);
+}
+
+static ssize_t mci_ce_count_show(struct device *dev,
+				 struct device_attribute *mattr,
+				 char *data)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+
+	return sprintf(data, "%d\n", mci->ce_mc);
+}
+
+static ssize_t mci_ce_noinfo_show(struct device *dev,
+				  struct device_attribute *mattr,
+				  char *data)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+
+	return sprintf(data, "%d\n", mci->ce_noinfo_count);
+}
+
+static ssize_t mci_ue_noinfo_show(struct device *dev,
+				  struct device_attribute *mattr,
+				  char *data)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+
+	return sprintf(data, "%d\n", mci->ue_noinfo_count);
+}
+
+static ssize_t mci_seconds_show(struct device *dev,
+				struct device_attribute *mattr,
+				char *data)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+
+	return sprintf(data, "%ld\n", (jiffies - mci->start_time) / HZ);
+}
+
+static ssize_t mci_ctl_name_show(struct device *dev,
+				 struct device_attribute *mattr,
+				 char *data)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+
+	return sprintf(data, "%s\n", mci->ctl_name);
+}
+
+static ssize_t mci_size_mb_show(struct device *dev,
+				struct device_attribute *mattr,
+				char *data)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	int total_pages = 0, csrow_idx, j;
+
+	for (csrow_idx = 0; csrow_idx < mci->nr_csrows; csrow_idx++) {
+		struct csrow_info *csrow = mci->csrows[csrow_idx];
+
+		for (j = 0; j < csrow->nr_channels; j++) {
+			struct dimm_info *dimm = csrow->channels[j]->dimm;
+
+			total_pages += dimm->nr_pages;
+		}
+	}
+
+	return sprintf(data, "%u\n", PAGES_TO_MiB(total_pages));
+}
+
+static ssize_t mci_max_location_show(struct device *dev,
+				     struct device_attribute *mattr,
+				     char *data)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	int i;
+	char *p = data;
+
+	for (i = 0; i < mci->n_layers; i++) {
+		p += sprintf(p, "%s %d ",
+			     edac_layer_name[mci->layers[i].type],
+			     mci->layers[i].size - 1);
+	}
+
+	return p - data;
+}
+
+/* default Control file */
+static DEVICE_ATTR(reset_counters, S_IWUSR, NULL, mci_reset_counters_store);
+
+/* default Attribute files */
+static DEVICE_ATTR(mc_name, S_IRUGO, mci_ctl_name_show, NULL);
+static DEVICE_ATTR(size_mb, S_IRUGO, mci_size_mb_show, NULL);
+static DEVICE_ATTR(seconds_since_reset, S_IRUGO, mci_seconds_show, NULL);
+static DEVICE_ATTR(ue_noinfo_count, S_IRUGO, mci_ue_noinfo_show, NULL);
+static DEVICE_ATTR(ce_noinfo_count, S_IRUGO, mci_ce_noinfo_show, NULL);
+static DEVICE_ATTR(ue_count, S_IRUGO, mci_ue_count_show, NULL);
+static DEVICE_ATTR(ce_count, S_IRUGO, mci_ce_count_show, NULL);
+static DEVICE_ATTR(max_location, S_IRUGO, mci_max_location_show, NULL);
+
+/* memory scrubber attribute file */
+static DEVICE_ATTR(sdram_scrub_rate, 0, mci_sdram_scrub_rate_show,
+	    mci_sdram_scrub_rate_store); /* umode set later in is_visible */
+
+static struct attribute *mci_attrs[] = {
+	&dev_attr_reset_counters.attr,
+	&dev_attr_mc_name.attr,
+	&dev_attr_size_mb.attr,
+	&dev_attr_seconds_since_reset.attr,
+	&dev_attr_ue_noinfo_count.attr,
+	&dev_attr_ce_noinfo_count.attr,
+	&dev_attr_ue_count.attr,
+	&dev_attr_ce_count.attr,
+	&dev_attr_max_location.attr,
+	&dev_attr_sdram_scrub_rate.attr,
+	NULL
+};
+
+static umode_t mci_attr_is_visible(struct kobject *kobj,
+				   struct attribute *attr, int idx)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct mem_ctl_info *mci = to_mci(dev);
+	umode_t mode = 0;
+
+	if (attr != &dev_attr_sdram_scrub_rate.attr)
+		return attr->mode;
+	if (mci->get_sdram_scrub_rate)
+		mode |= S_IRUGO;
+	if (mci->set_sdram_scrub_rate)
+		mode |= S_IWUSR;
+	return mode;
+}
+
+static const struct attribute_group mci_attr_grp = {
+	.attrs	= mci_attrs,
+	.is_visible = mci_attr_is_visible,
+};
+
+static const struct attribute_group *mci_attr_groups[] = {
+	&mci_attr_grp,
+	NULL
+};
+
+static void mci_attr_release(struct device *dev)
+{
+	struct mem_ctl_info *mci = container_of(dev, struct mem_ctl_info, dev);
+
+	edac_dbg(1, "Releasing csrow device %s\n", dev_name(dev));
+	kfree(mci);
+}
+
+static const struct device_type mci_attr_type = {
+	.groups		= mci_attr_groups,
+	.release	= mci_attr_release,
+};
+
+/*
+ * Create a new Memory Controller kobject instance,
+ *	mc<id> under the 'mc' directory
+ *
+ * Return:
+ *	0	Success
+ *	!0	Failure
+ */
+int edac_create_sysfs_mci_device(struct mem_ctl_info *mci,
+				 const struct attribute_group **groups)
+{
+	char *name;
+	int i, err;
+
+	/*
+	 * The memory controller needs its own bus, in order to avoid
+	 * namespace conflicts at /sys/bus/edac.
+	 */
+	name = kasprintf(GFP_KERNEL, "mc%d", mci->mc_idx);
+	if (!name)
+		return -ENOMEM;
+
+	mci->bus->name = name;
+
+	edac_dbg(0, "creating bus %s\n", mci->bus->name);
+
+	err = bus_register(mci->bus);
+	if (err < 0) {
+		kfree(name);
+		return err;
+	}
+
+	/* get the /sys/devices/system/edac subsys reference */
+	mci->dev.type = &mci_attr_type;
+	device_initialize(&mci->dev);
+
+	mci->dev.parent = mci_pdev;
+	mci->dev.bus = mci->bus;
+	mci->dev.groups = groups;
+	dev_set_name(&mci->dev, "mc%d", mci->mc_idx);
+	dev_set_drvdata(&mci->dev, mci);
+	pm_runtime_forbid(&mci->dev);
+
+	edac_dbg(0, "creating device %s\n", dev_name(&mci->dev));
+	err = device_add(&mci->dev);
+	if (err < 0) {
+		edac_dbg(1, "failure: create device %s\n", dev_name(&mci->dev));
+		goto fail_unregister_bus;
+	}
+
+	/*
+	 * Create the dimm/rank devices
+	 */
+	for (i = 0; i < mci->tot_dimms; i++) {
+		struct dimm_info *dimm = mci->dimms[i];
+		/* Only expose populated DIMMs */
+		if (!dimm->nr_pages)
+			continue;
+
+#ifdef CONFIG_EDAC_DEBUG
+		edac_dbg(1, "creating dimm%d, located at ", i);
+		if (edac_debug_level >= 1) {
+			int lay;
+			for (lay = 0; lay < mci->n_layers; lay++)
+				printk(KERN_CONT "%s %d ",
+					edac_layer_name[mci->layers[lay].type],
+					dimm->location[lay]);
+			printk(KERN_CONT "\n");
+		}
+#endif
+		err = edac_create_dimm_object(mci, dimm, i);
+		if (err) {
+			edac_dbg(1, "failure: create dimm %d obj\n", i);
+			goto fail_unregister_dimm;
+		}
+	}
+
+#ifdef CONFIG_EDAC_LEGACY_SYSFS
+	err = edac_create_csrow_objects(mci);
+	if (err < 0)
+		goto fail_unregister_dimm;
+#endif
+
+	edac_create_debugfs_nodes(mci);
+	return 0;
+
+fail_unregister_dimm:
+	for (i--; i >= 0; i--) {
+		struct dimm_info *dimm = mci->dimms[i];
+		if (!dimm->nr_pages)
+			continue;
+
+		device_unregister(&dimm->dev);
+	}
+	device_unregister(&mci->dev);
+fail_unregister_bus:
+	bus_unregister(mci->bus);
+	kfree(name);
+
+	return err;
+}
+
+/*
+ * remove a Memory Controller instance
+ */
+void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci)
+{
+	int i;
+
+	edac_dbg(0, "\n");
+
+#ifdef CONFIG_EDAC_DEBUG
+	edac_debugfs_remove_recursive(mci->debugfs);
+#endif
+#ifdef CONFIG_EDAC_LEGACY_SYSFS
+	edac_delete_csrow_objects(mci);
+#endif
+
+	for (i = 0; i < mci->tot_dimms; i++) {
+		struct dimm_info *dimm = mci->dimms[i];
+		if (dimm->nr_pages == 0)
+			continue;
+		edac_dbg(0, "removing device %s\n", dev_name(&dimm->dev));
+		device_unregister(&dimm->dev);
+	}
+}
+
+void edac_unregister_sysfs(struct mem_ctl_info *mci)
+{
+	struct bus_type *bus = mci->bus;
+	const char *name = mci->bus->name;
+
+	edac_dbg(1, "Unregistering device %s\n", dev_name(&mci->dev));
+	device_unregister(&mci->dev);
+	bus_unregister(bus);
+	kfree(name);
+}
+
+static void mc_attr_release(struct device *dev)
+{
+	/*
+	 * There's no container structure here, as this is just the mci
+	 * parent device, used to create the /sys/devices/mc sysfs node.
+	 * So, there are no attributes on it.
+	 */
+	edac_dbg(1, "Releasing device %s\n", dev_name(dev));
+	kfree(dev);
+}
+
+static const struct device_type mc_attr_type = {
+	.release	= mc_attr_release,
+};
+/*
+ * Init/exit code for the module. Basically, creates/removes /sys/class/rc
+ */
+int __init edac_mc_sysfs_init(void)
+{
+	int err;
+
+	mci_pdev = kzalloc(sizeof(*mci_pdev), GFP_KERNEL);
+	if (!mci_pdev) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	mci_pdev->bus = edac_get_sysfs_subsys();
+	mci_pdev->type = &mc_attr_type;
+	device_initialize(mci_pdev);
+	dev_set_name(mci_pdev, "mc");
+
+	err = device_add(mci_pdev);
+	if (err < 0)
+		goto out_put_device;
+
+	edac_dbg(0, "device %s created\n", dev_name(mci_pdev));
+
+	return 0;
+
+ out_put_device:
+	put_device(mci_pdev);
+ out:
+	return err;
+}
+
+void edac_mc_sysfs_exit(void)
+{
+	device_unregister(mci_pdev);
+}
diff --git a/drivers/edac/edac_module.c b/drivers/edac/edac_module.c
new file mode 100644
index 000000000..32a931d0c
--- /dev/null
+++ b/drivers/edac/edac_module.c
@@ -0,0 +1,168 @@
+/*
+ * edac_module.c
+ *
+ * (C) 2007 www.softwarebitmaker.com
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Author: Doug Thompson <dougthompson@xmission.com>
+ *
+ */
+#include <linux/edac.h>
+
+#include "edac_mc.h"
+#include "edac_module.h"
+
+#define EDAC_VERSION "Ver: 3.0.0"
+
+#ifdef CONFIG_EDAC_DEBUG
+
+static int edac_set_debug_level(const char *buf,
+				const struct kernel_param *kp)
+{
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	if (val > 4)
+		return -EINVAL;
+
+	return param_set_int(buf, kp);
+}
+
+/* Values of 0 to 4 will generate output */
+int edac_debug_level = 2;
+EXPORT_SYMBOL_GPL(edac_debug_level);
+
+module_param_call(edac_debug_level, edac_set_debug_level, param_get_int,
+		  &edac_debug_level, 0644);
+MODULE_PARM_DESC(edac_debug_level, "EDAC debug level: [0-4], default: 2");
+#endif
+
+/*
+ * edac_op_state_to_string()
+ */
+char *edac_op_state_to_string(int opstate)
+{
+	if (opstate == OP_RUNNING_POLL)
+		return "POLLED";
+	else if (opstate == OP_RUNNING_INTERRUPT)
+		return "INTERRUPT";
+	else if (opstate == OP_RUNNING_POLL_INTR)
+		return "POLL-INTR";
+	else if (opstate == OP_ALLOC)
+		return "ALLOC";
+	else if (opstate == OP_OFFLINE)
+		return "OFFLINE";
+
+	return "UNKNOWN";
+}
+
+/*
+ * sysfs object: /sys/devices/system/edac
+ *	need to export to other files
+ */
+static struct bus_type edac_subsys = {
+	.name = "edac",
+	.dev_name = "edac",
+};
+
+static int edac_subsys_init(void)
+{
+	int err;
+
+	/* create the /sys/devices/system/edac directory */
+	err = subsys_system_register(&edac_subsys, NULL);
+	if (err)
+		printk(KERN_ERR "Error registering toplevel EDAC sysfs dir\n");
+
+	return err;
+}
+
+static void edac_subsys_exit(void)
+{
+	bus_unregister(&edac_subsys);
+}
+
+/* return pointer to the 'edac' node in sysfs */
+struct bus_type *edac_get_sysfs_subsys(void)
+{
+	return &edac_subsys;
+}
+EXPORT_SYMBOL_GPL(edac_get_sysfs_subsys);
+/*
+ * edac_init
+ *      module initialization entry point
+ */
+static int __init edac_init(void)
+{
+	int err = 0;
+
+	edac_printk(KERN_INFO, EDAC_MC, EDAC_VERSION "\n");
+
+	err = edac_subsys_init();
+	if (err)
+		return err;
+
+	/*
+	 * Harvest and clear any boot/initialization PCI parity errors
+	 *
+	 * FIXME: This only clears errors logged by devices present at time of
+	 *      module initialization.  We should also do an initial clear
+	 *      of each newly hotplugged device.
+	 */
+	edac_pci_clear_parity_errors();
+
+	err = edac_mc_sysfs_init();
+	if (err)
+		goto err_sysfs;
+
+	edac_debugfs_init();
+
+	err = edac_workqueue_setup();
+	if (err) {
+		edac_printk(KERN_ERR, EDAC_MC, "Failure initializing workqueue\n");
+		goto err_wq;
+	}
+
+	return 0;
+
+err_wq:
+	edac_debugfs_exit();
+	edac_mc_sysfs_exit();
+
+err_sysfs:
+	edac_subsys_exit();
+
+	return err;
+}
+
+/*
+ * edac_exit()
+ *      module exit/termination function
+ */
+static void __exit edac_exit(void)
+{
+	edac_dbg(0, "\n");
+
+	/* tear down the various subsystems */
+	edac_workqueue_teardown();
+	edac_mc_sysfs_exit();
+	edac_debugfs_exit();
+	edac_subsys_exit();
+}
+
+/*
+ * Inform the kernel of our entry and exit points
+ */
+subsys_initcall(edac_init);
+module_exit(edac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Doug Thompson www.softwarebitmaker.com, et al");
+MODULE_DESCRIPTION("Core library routines for EDAC reporting");
diff --git a/drivers/edac/edac_module.h b/drivers/edac/edac_module.h
new file mode 100644
index 000000000..c9f0e7387
--- /dev/null
+++ b/drivers/edac/edac_module.h
@@ -0,0 +1,129 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * edac_module.h
+ *
+ * For defining functions/data for within the EDAC_CORE module only
+ *
+ * written by doug thompson <norsk5@xmission.h>
+ */
+
+#ifndef	__EDAC_MODULE_H__
+#define	__EDAC_MODULE_H__
+
+#include "edac_mc.h"
+#include "edac_pci.h"
+#include "edac_device.h"
+
+/*
+ * INTERNAL EDAC MODULE:
+ * EDAC memory controller sysfs create/remove functions
+ * and setup/teardown functions
+ *
+ * edac_mc objects
+ */
+	/* on edac_mc_sysfs.c */
+int edac_mc_sysfs_init(void);
+void edac_mc_sysfs_exit(void);
+extern int edac_create_sysfs_mci_device(struct mem_ctl_info *mci,
+					const struct attribute_group **groups);
+extern void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci);
+void edac_unregister_sysfs(struct mem_ctl_info *mci);
+extern int edac_get_log_ue(void);
+extern int edac_get_log_ce(void);
+extern int edac_get_panic_on_ue(void);
+extern int edac_mc_get_log_ue(void);
+extern int edac_mc_get_log_ce(void);
+extern int edac_mc_get_panic_on_ue(void);
+extern int edac_get_poll_msec(void);
+extern unsigned int edac_mc_get_poll_msec(void);
+
+unsigned edac_dimm_info_location(struct dimm_info *dimm, char *buf,
+				 unsigned len);
+
+	/* on edac_device.c */
+extern int edac_device_register_sysfs_main_kobj(
+				struct edac_device_ctl_info *edac_dev);
+extern void edac_device_unregister_sysfs_main_kobj(
+				struct edac_device_ctl_info *edac_dev);
+extern int edac_device_create_sysfs(struct edac_device_ctl_info *edac_dev);
+extern void edac_device_remove_sysfs(struct edac_device_ctl_info *edac_dev);
+
+/* edac core workqueue: single CPU mode */
+int edac_workqueue_setup(void);
+void edac_workqueue_teardown(void);
+bool edac_queue_work(struct delayed_work *work, unsigned long delay);
+bool edac_stop_work(struct delayed_work *work);
+bool edac_mod_work(struct delayed_work *work, unsigned long delay);
+
+extern void edac_device_reset_delay_period(struct edac_device_ctl_info
+					   *edac_dev, unsigned long value);
+extern void edac_mc_reset_delay_period(unsigned long value);
+
+extern void *edac_align_ptr(void **p, unsigned size, int n_elems);
+
+/*
+ * EDAC debugfs functions
+ */
+
+#define edac_debugfs_remove_recursive debugfs_remove_recursive
+#define edac_debugfs_remove debugfs_remove
+#ifdef CONFIG_EDAC_DEBUG
+int edac_debugfs_init(void);
+void edac_debugfs_exit(void);
+int edac_create_debugfs_nodes(struct mem_ctl_info *mci);
+struct dentry *edac_debugfs_create_dir(const char *dirname);
+struct dentry *
+edac_debugfs_create_dir_at(const char *dirname, struct dentry *parent);
+struct dentry *
+edac_debugfs_create_file(const char *name, umode_t mode, struct dentry *parent,
+			 void *data, const struct file_operations *fops);
+struct dentry *
+edac_debugfs_create_x8(const char *name, umode_t mode, struct dentry *parent, u8 *value);
+struct dentry *
+edac_debugfs_create_x16(const char *name, umode_t mode, struct dentry *parent, u16 *value);
+#else
+static inline int edac_debugfs_init(void)					{ return -ENODEV; }
+static inline void edac_debugfs_exit(void)					{ }
+static inline int edac_create_debugfs_nodes(struct mem_ctl_info *mci)		{ return 0; }
+static inline struct dentry *edac_debugfs_create_dir(const char *dirname)	{ return NULL; }
+static inline struct dentry *
+edac_debugfs_create_dir_at(const char *dirname, struct dentry *parent)		{ return NULL; }
+static inline struct dentry *
+edac_debugfs_create_file(const char *name, umode_t mode, struct dentry *parent,
+			 void *data, const struct file_operations *fops)	{ return NULL; }
+static inline struct dentry *
+edac_debugfs_create_x8(const char *name, umode_t mode,
+		       struct dentry *parent, u8 *value)			{ return NULL; }
+static inline struct dentry *
+edac_debugfs_create_x16(const char *name, umode_t mode,
+		       struct dentry *parent, u16 *value)			{ return NULL; }
+#endif
+
+/*
+ * EDAC PCI functions
+ */
+#ifdef	CONFIG_PCI
+extern void edac_pci_do_parity_check(void);
+extern void edac_pci_clear_parity_errors(void);
+extern int edac_sysfs_pci_setup(void);
+extern void edac_sysfs_pci_teardown(void);
+extern int edac_pci_get_check_errors(void);
+extern int edac_pci_get_poll_msec(void);
+extern void edac_pci_remove_sysfs(struct edac_pci_ctl_info *pci);
+extern void edac_pci_handle_pe(struct edac_pci_ctl_info *pci, const char *msg);
+extern void edac_pci_handle_npe(struct edac_pci_ctl_info *pci,
+				const char *msg);
+#else				/* CONFIG_PCI */
+/* pre-process these away */
+#define edac_pci_do_parity_check()
+#define edac_pci_clear_parity_errors()
+#define edac_sysfs_pci_setup()  (0)
+#define edac_sysfs_pci_teardown()
+#define edac_pci_get_check_errors()
+#define edac_pci_get_poll_msec()
+#define edac_pci_handle_pe()
+#define edac_pci_handle_npe()
+#endif				/* CONFIG_PCI */
+
+#endif				/* __EDAC_MODULE_H__ */
diff --git a/drivers/edac/edac_pci.c b/drivers/edac/edac_pci.c
new file mode 100644
index 000000000..48c844a72
--- /dev/null
+++ b/drivers/edac/edac_pci.c
@@ -0,0 +1,341 @@
+/*
+ * EDAC PCI component
+ *
+ * Author: Dave Jiang <djiang@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+#include <asm/page.h>
+#include <linux/uaccess.h>
+#include <linux/ctype.h>
+#include <linux/highmem.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/sysctl.h>
+#include <linux/timer.h>
+
+#include "edac_pci.h"
+#include "edac_module.h"
+
+static DEFINE_MUTEX(edac_pci_ctls_mutex);
+static LIST_HEAD(edac_pci_list);
+static atomic_t pci_indexes = ATOMIC_INIT(0);
+
+struct edac_pci_ctl_info *edac_pci_alloc_ctl_info(unsigned int sz_pvt,
+						const char *edac_pci_name)
+{
+	struct edac_pci_ctl_info *pci;
+	void *p = NULL, *pvt;
+	unsigned int size;
+
+	edac_dbg(1, "\n");
+
+	pci = edac_align_ptr(&p, sizeof(*pci), 1);
+	pvt = edac_align_ptr(&p, 1, sz_pvt);
+	size = ((unsigned long)pvt) + sz_pvt;
+
+	/* Alloc the needed control struct memory */
+	pci = kzalloc(size, GFP_KERNEL);
+	if (pci  == NULL)
+		return NULL;
+
+	/* Now much private space */
+	pvt = sz_pvt ? ((char *)pci) + ((unsigned long)pvt) : NULL;
+
+	pci->pvt_info = pvt;
+	pci->op_state = OP_ALLOC;
+
+	snprintf(pci->name, strlen(edac_pci_name) + 1, "%s", edac_pci_name);
+
+	return pci;
+}
+EXPORT_SYMBOL_GPL(edac_pci_alloc_ctl_info);
+
+void edac_pci_free_ctl_info(struct edac_pci_ctl_info *pci)
+{
+	edac_dbg(1, "\n");
+
+	edac_pci_remove_sysfs(pci);
+}
+EXPORT_SYMBOL_GPL(edac_pci_free_ctl_info);
+
+/*
+ * find_edac_pci_by_dev()
+ * 	scans the edac_pci list for a specific 'struct device *'
+ *
+ *	return NULL if not found, or return control struct pointer
+ */
+static struct edac_pci_ctl_info *find_edac_pci_by_dev(struct device *dev)
+{
+	struct edac_pci_ctl_info *pci;
+	struct list_head *item;
+
+	edac_dbg(1, "\n");
+
+	list_for_each(item, &edac_pci_list) {
+		pci = list_entry(item, struct edac_pci_ctl_info, link);
+
+		if (pci->dev == dev)
+			return pci;
+	}
+
+	return NULL;
+}
+
+/*
+ * add_edac_pci_to_global_list
+ * 	Before calling this function, caller must assign a unique value to
+ * 	edac_dev->pci_idx.
+ * 	Return:
+ * 		0 on success
+ * 		1 on failure
+ */
+static int add_edac_pci_to_global_list(struct edac_pci_ctl_info *pci)
+{
+	struct list_head *item, *insert_before;
+	struct edac_pci_ctl_info *rover;
+
+	edac_dbg(1, "\n");
+
+	insert_before = &edac_pci_list;
+
+	/* Determine if already on the list */
+	rover = find_edac_pci_by_dev(pci->dev);
+	if (unlikely(rover != NULL))
+		goto fail0;
+
+	/* Insert in ascending order by 'pci_idx', so find position */
+	list_for_each(item, &edac_pci_list) {
+		rover = list_entry(item, struct edac_pci_ctl_info, link);
+
+		if (rover->pci_idx >= pci->pci_idx) {
+			if (unlikely(rover->pci_idx == pci->pci_idx))
+				goto fail1;
+
+			insert_before = item;
+			break;
+		}
+	}
+
+	list_add_tail_rcu(&pci->link, insert_before);
+	return 0;
+
+fail0:
+	edac_printk(KERN_WARNING, EDAC_PCI,
+		"%s (%s) %s %s already assigned %d\n",
+		dev_name(rover->dev), edac_dev_name(rover),
+		rover->mod_name, rover->ctl_name, rover->pci_idx);
+	return 1;
+
+fail1:
+	edac_printk(KERN_WARNING, EDAC_PCI,
+		"but in low-level driver: attempt to assign\n"
+		"\tduplicate pci_idx %d in %s()\n", rover->pci_idx,
+		__func__);
+	return 1;
+}
+
+/*
+ * del_edac_pci_from_global_list
+ *
+ *	remove the PCI control struct from the global list
+ */
+static void del_edac_pci_from_global_list(struct edac_pci_ctl_info *pci)
+{
+	list_del_rcu(&pci->link);
+
+	/* these are for safe removal of devices from global list while
+	 * NMI handlers may be traversing list
+	 */
+	synchronize_rcu();
+	INIT_LIST_HEAD(&pci->link);
+}
+
+/*
+ * edac_pci_workq_function()
+ *
+ * 	periodic function that performs the operation
+ *	scheduled by a workq request, for a given PCI control struct
+ */
+static void edac_pci_workq_function(struct work_struct *work_req)
+{
+	struct delayed_work *d_work = to_delayed_work(work_req);
+	struct edac_pci_ctl_info *pci = to_edac_pci_ctl_work(d_work);
+	int msec;
+	unsigned long delay;
+
+	edac_dbg(3, "checking\n");
+
+	mutex_lock(&edac_pci_ctls_mutex);
+
+	if (pci->op_state != OP_RUNNING_POLL) {
+		mutex_unlock(&edac_pci_ctls_mutex);
+		return;
+	}
+
+	if (edac_pci_get_check_errors())
+		pci->edac_check(pci);
+
+	/* if we are on a one second period, then use round */
+	msec = edac_pci_get_poll_msec();
+	if (msec == 1000)
+		delay = round_jiffies_relative(msecs_to_jiffies(msec));
+	else
+		delay = msecs_to_jiffies(msec);
+
+	edac_queue_work(&pci->work, delay);
+
+	mutex_unlock(&edac_pci_ctls_mutex);
+}
+
+int edac_pci_alloc_index(void)
+{
+	return atomic_inc_return(&pci_indexes) - 1;
+}
+EXPORT_SYMBOL_GPL(edac_pci_alloc_index);
+
+int edac_pci_add_device(struct edac_pci_ctl_info *pci, int edac_idx)
+{
+	edac_dbg(0, "\n");
+
+	pci->pci_idx = edac_idx;
+	pci->start_time = jiffies;
+
+	mutex_lock(&edac_pci_ctls_mutex);
+
+	if (add_edac_pci_to_global_list(pci))
+		goto fail0;
+
+	if (edac_pci_create_sysfs(pci)) {
+		edac_pci_printk(pci, KERN_WARNING,
+				"failed to create sysfs pci\n");
+		goto fail1;
+	}
+
+	if (pci->edac_check) {
+		pci->op_state = OP_RUNNING_POLL;
+
+		INIT_DELAYED_WORK(&pci->work, edac_pci_workq_function);
+		edac_queue_work(&pci->work, msecs_to_jiffies(edac_pci_get_poll_msec()));
+
+	} else {
+		pci->op_state = OP_RUNNING_INTERRUPT;
+	}
+
+	edac_pci_printk(pci, KERN_INFO,
+		"Giving out device to module %s controller %s: DEV %s (%s)\n",
+		pci->mod_name, pci->ctl_name, pci->dev_name,
+		edac_op_state_to_string(pci->op_state));
+
+	mutex_unlock(&edac_pci_ctls_mutex);
+	return 0;
+
+	/* error unwind stack */
+fail1:
+	del_edac_pci_from_global_list(pci);
+fail0:
+	mutex_unlock(&edac_pci_ctls_mutex);
+	return 1;
+}
+EXPORT_SYMBOL_GPL(edac_pci_add_device);
+
+struct edac_pci_ctl_info *edac_pci_del_device(struct device *dev)
+{
+	struct edac_pci_ctl_info *pci;
+
+	edac_dbg(0, "\n");
+
+	mutex_lock(&edac_pci_ctls_mutex);
+
+	/* ensure the control struct is on the global list
+	 * if not, then leave
+	 */
+	pci = find_edac_pci_by_dev(dev);
+	if (pci  == NULL) {
+		mutex_unlock(&edac_pci_ctls_mutex);
+		return NULL;
+	}
+
+	pci->op_state = OP_OFFLINE;
+
+	del_edac_pci_from_global_list(pci);
+
+	mutex_unlock(&edac_pci_ctls_mutex);
+
+	if (pci->edac_check)
+		edac_stop_work(&pci->work);
+
+	edac_printk(KERN_INFO, EDAC_PCI,
+		"Removed device %d for %s %s: DEV %s\n",
+		pci->pci_idx, pci->mod_name, pci->ctl_name, edac_dev_name(pci));
+
+	return pci;
+}
+EXPORT_SYMBOL_GPL(edac_pci_del_device);
+
+/*
+ * edac_pci_generic_check
+ *
+ *	a Generic parity check API
+ */
+static void edac_pci_generic_check(struct edac_pci_ctl_info *pci)
+{
+	edac_dbg(4, "\n");
+	edac_pci_do_parity_check();
+}
+
+/* free running instance index counter */
+static int edac_pci_idx;
+#define EDAC_PCI_GENCTL_NAME	"EDAC PCI controller"
+
+struct edac_pci_gen_data {
+	int edac_idx;
+};
+
+struct edac_pci_ctl_info *edac_pci_create_generic_ctl(struct device *dev,
+						const char *mod_name)
+{
+	struct edac_pci_ctl_info *pci;
+	struct edac_pci_gen_data *pdata;
+
+	pci = edac_pci_alloc_ctl_info(sizeof(*pdata), EDAC_PCI_GENCTL_NAME);
+	if (!pci)
+		return NULL;
+
+	pdata = pci->pvt_info;
+	pci->dev = dev;
+	dev_set_drvdata(pci->dev, pci);
+	pci->dev_name = pci_name(to_pci_dev(dev));
+
+	pci->mod_name = mod_name;
+	pci->ctl_name = EDAC_PCI_GENCTL_NAME;
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		pci->edac_check = edac_pci_generic_check;
+
+	pdata->edac_idx = edac_pci_idx++;
+
+	if (edac_pci_add_device(pci, pdata->edac_idx) > 0) {
+		edac_dbg(3, "failed edac_pci_add_device()\n");
+		edac_pci_free_ctl_info(pci);
+		return NULL;
+	}
+
+	return pci;
+}
+EXPORT_SYMBOL_GPL(edac_pci_create_generic_ctl);
+
+void edac_pci_release_generic_ctl(struct edac_pci_ctl_info *pci)
+{
+	edac_dbg(0, "pci mod=%s\n", pci->mod_name);
+
+	edac_pci_del_device(pci->dev);
+	edac_pci_free_ctl_info(pci);
+}
+EXPORT_SYMBOL_GPL(edac_pci_release_generic_ctl);
diff --git a/drivers/edac/edac_pci.h b/drivers/edac/edac_pci.h
new file mode 100644
index 000000000..5175f5724
--- /dev/null
+++ b/drivers/edac/edac_pci.h
@@ -0,0 +1,271 @@
+/*
+ * Defines, structures, APIs for edac_pci and edac_pci_sysfs
+ *
+ * (C) 2007 Linux Networx (http://lnxi.com)
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Written by Thayne Harbaugh
+ * Based on work by Dan Hollis <goemon at anime dot net> and others.
+ *	http://www.anime.net/~goemon/linux-ecc/
+ *
+ * NMI handling support added by
+ *     Dave Peterson <dsp@llnl.gov> <dave_peterson@pobox.com>
+ *
+ * Refactored for multi-source files:
+ *	Doug Thompson <norsk5@xmission.com>
+ *
+ * Please look at Documentation/driver-api/edac.rst for more info about
+ * EDAC core structs and functions.
+ */
+
+#ifndef _EDAC_PCI_H_
+#define _EDAC_PCI_H_
+
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/edac.h>
+#include <linux/kobject.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#ifdef CONFIG_PCI
+
+struct edac_pci_counter {
+	atomic_t pe_count;
+	atomic_t npe_count;
+};
+
+/*
+ * Abstract edac_pci control info structure
+ *
+ */
+struct edac_pci_ctl_info {
+	/* for global list of edac_pci_ctl_info structs */
+	struct list_head link;
+
+	int pci_idx;
+
+	struct bus_type *edac_subsys;	/* pointer to subsystem */
+
+	/* the internal state of this controller instance */
+	int op_state;
+	/* work struct for this instance */
+	struct delayed_work work;
+
+	/* pointer to edac polling checking routine:
+	 *      If NOT NULL: points to polling check routine
+	 *      If NULL: Then assumes INTERRUPT operation, where
+	 *              MC driver will receive events
+	 */
+	void (*edac_check) (struct edac_pci_ctl_info * edac_dev);
+
+	struct device *dev;	/* pointer to device structure */
+
+	const char *mod_name;	/* module name */
+	const char *ctl_name;	/* edac controller  name */
+	const char *dev_name;	/* pci/platform/etc... name */
+
+	void *pvt_info;		/* pointer to 'private driver' info */
+
+	unsigned long start_time;	/* edac_pci load start time (jiffies) */
+
+	struct completion complete;
+
+	/* sysfs top name under 'edac' directory
+	 * and instance name:
+	 *      cpu/cpu0/...
+	 *      cpu/cpu1/...
+	 *      cpu/cpu2/...
+	 *      ...
+	 */
+	char name[EDAC_DEVICE_NAME_LEN + 1];
+
+	/* Event counters for the this whole EDAC Device */
+	struct edac_pci_counter counters;
+
+	/* edac sysfs device control for the 'name'
+	 * device this structure controls
+	 */
+	struct kobject kobj;
+};
+
+#define to_edac_pci_ctl_work(w) \
+		container_of(w, struct edac_pci_ctl_info,work)
+
+/* write all or some bits in a byte-register*/
+static inline void pci_write_bits8(struct pci_dev *pdev, int offset, u8 value,
+				   u8 mask)
+{
+	if (mask != 0xff) {
+		u8 buf;
+
+		pci_read_config_byte(pdev, offset, &buf);
+		value &= mask;
+		buf &= ~mask;
+		value |= buf;
+	}
+
+	pci_write_config_byte(pdev, offset, value);
+}
+
+/* write all or some bits in a word-register*/
+static inline void pci_write_bits16(struct pci_dev *pdev, int offset,
+				    u16 value, u16 mask)
+{
+	if (mask != 0xffff) {
+		u16 buf;
+
+		pci_read_config_word(pdev, offset, &buf);
+		value &= mask;
+		buf &= ~mask;
+		value |= buf;
+	}
+
+	pci_write_config_word(pdev, offset, value);
+}
+
+/*
+ * pci_write_bits32
+ *
+ * edac local routine to do pci_write_config_dword, but adds
+ * a mask parameter. If mask is all ones, ignore the mask.
+ * Otherwise utilize the mask to isolate specified bits
+ *
+ * write all or some bits in a dword-register
+ */
+static inline void pci_write_bits32(struct pci_dev *pdev, int offset,
+				    u32 value, u32 mask)
+{
+	if (mask != 0xffffffff) {
+		u32 buf;
+
+		pci_read_config_dword(pdev, offset, &buf);
+		value &= mask;
+		buf &= ~mask;
+		value |= buf;
+	}
+
+	pci_write_config_dword(pdev, offset, value);
+}
+
+#endif				/* CONFIG_PCI */
+
+/*
+ * edac_pci APIs
+ */
+
+/**
+ * edac_pci_alloc_ctl_info:
+ *	The alloc() function for the 'edac_pci' control info
+ *	structure.
+ *
+ * @sz_pvt: size of the private info at struct &edac_pci_ctl_info
+ * @edac_pci_name: name of the PCI device
+ *
+ * The chip driver will allocate one of these for each
+ * edac_pci it is going to control/register with the EDAC CORE.
+ *
+ * Returns: a pointer to struct &edac_pci_ctl_info on success; %NULL otherwise.
+ */
+extern struct edac_pci_ctl_info *edac_pci_alloc_ctl_info(unsigned int sz_pvt,
+				const char *edac_pci_name);
+
+/**
+ * edac_pci_free_ctl_info():
+ *	Last action on the pci control structure.
+ *
+ * @pci: pointer to struct &edac_pci_ctl_info
+ *
+ * Calls the remove sysfs information, which will unregister
+ * this control struct's kobj. When that kobj's ref count
+ * goes to zero, its release function will be call and then
+ * kfree() the memory.
+ */
+extern void edac_pci_free_ctl_info(struct edac_pci_ctl_info *pci);
+
+/**
+ * edac_pci_alloc_index: Allocate a unique PCI index number
+ *
+ * Returns:
+ *      allocated index number
+ *
+ */
+extern int edac_pci_alloc_index(void);
+
+/**
+ * edac_pci_add_device(): Insert the 'edac_dev' structure into the
+ *	edac_pci global list and create sysfs entries associated with
+ *	edac_pci structure.
+ *
+ * @pci: pointer to the edac_device structure to be added to the list
+ * @edac_idx: A unique numeric identifier to be assigned to the
+ *	'edac_pci' structure.
+ *
+ * Returns:
+ *	0 on Success, or an error code on failure
+ */
+extern int edac_pci_add_device(struct edac_pci_ctl_info *pci, int edac_idx);
+
+/**
+ * edac_pci_del_device()
+ *	Remove sysfs entries for specified edac_pci structure and
+ *	then remove edac_pci structure from global list
+ *
+ * @dev:
+ *	Pointer to 'struct device' representing edac_pci structure
+ *	to remove
+ *
+ * Returns:
+ *	Pointer to removed edac_pci structure,
+ *	or %NULL if device not found
+ */
+extern struct edac_pci_ctl_info *edac_pci_del_device(struct device *dev);
+
+/**
+ * edac_pci_create_generic_ctl()
+ *	A generic constructor for a PCI parity polling device
+ *	Some systems have more than one domain of PCI busses.
+ *	For systems with one domain, then this API will
+ *	provide for a generic poller.
+ *
+ * @dev: pointer to struct &device;
+ * @mod_name: name of the PCI device
+ *
+ * This routine calls the edac_pci_alloc_ctl_info() for
+ * the generic device, with default values
+ *
+ * Returns: Pointer to struct &edac_pci_ctl_info on success, %NULL on
+ *	failure.
+ */
+extern struct edac_pci_ctl_info *edac_pci_create_generic_ctl(
+				struct device *dev,
+				const char *mod_name);
+
+/**
+ * edac_pci_release_generic_ctl
+ *	The release function of a generic EDAC PCI polling device
+ *
+ * @pci: pointer to struct &edac_pci_ctl_info
+ */
+extern void edac_pci_release_generic_ctl(struct edac_pci_ctl_info *pci);
+
+/**
+ * edac_pci_create_sysfs
+ *	Create the controls/attributes for the specified EDAC PCI device
+ *
+ * @pci: pointer to struct &edac_pci_ctl_info
+ */
+extern int edac_pci_create_sysfs(struct edac_pci_ctl_info *pci);
+
+/**
+ * edac_pci_remove_sysfs()
+ *	remove the controls and attributes for this EDAC PCI device
+ *
+ * @pci: pointer to struct &edac_pci_ctl_info
+ */
+extern void edac_pci_remove_sysfs(struct edac_pci_ctl_info *pci);
+
+#endif
diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c
new file mode 100644
index 000000000..53042af72
--- /dev/null
+++ b/drivers/edac/edac_pci_sysfs.c
@@ -0,0 +1,737 @@
+/*
+ * (C) 2005, 2006 Linux Networx (http://lnxi.com)
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Written Doug Thompson <norsk5@xmission.com>
+ *
+ */
+#include <linux/module.h>
+#include <linux/edac.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+
+#include "edac_pci.h"
+#include "edac_module.h"
+
+#define EDAC_PCI_SYMLINK	"device"
+
+/* data variables exported via sysfs */
+static int check_pci_errors;		/* default NO check PCI parity */
+static int edac_pci_panic_on_pe;	/* default NO panic on PCI Parity */
+static int edac_pci_log_pe = 1;		/* log PCI parity errors */
+static int edac_pci_log_npe = 1;	/* log PCI non-parity error errors */
+static int edac_pci_poll_msec = 1000;	/* one second workq period */
+
+static atomic_t pci_parity_count = ATOMIC_INIT(0);
+static atomic_t pci_nonparity_count = ATOMIC_INIT(0);
+
+static struct kobject *edac_pci_top_main_kobj;
+static atomic_t edac_pci_sysfs_refcount = ATOMIC_INIT(0);
+
+/* getter functions for the data variables */
+int edac_pci_get_check_errors(void)
+{
+	return check_pci_errors;
+}
+
+static int edac_pci_get_log_pe(void)
+{
+	return edac_pci_log_pe;
+}
+
+static int edac_pci_get_log_npe(void)
+{
+	return edac_pci_log_npe;
+}
+
+static int edac_pci_get_panic_on_pe(void)
+{
+	return edac_pci_panic_on_pe;
+}
+
+int edac_pci_get_poll_msec(void)
+{
+	return edac_pci_poll_msec;
+}
+
+/**************************** EDAC PCI sysfs instance *******************/
+static ssize_t instance_pe_count_show(struct edac_pci_ctl_info *pci, char *data)
+{
+	return sprintf(data, "%u\n", atomic_read(&pci->counters.pe_count));
+}
+
+static ssize_t instance_npe_count_show(struct edac_pci_ctl_info *pci,
+				char *data)
+{
+	return sprintf(data, "%u\n", atomic_read(&pci->counters.npe_count));
+}
+
+#define to_instance(k) container_of(k, struct edac_pci_ctl_info, kobj)
+#define to_instance_attr(a) container_of(a, struct instance_attribute, attr)
+
+/* DEVICE instance kobject release() function */
+static void edac_pci_instance_release(struct kobject *kobj)
+{
+	struct edac_pci_ctl_info *pci;
+
+	edac_dbg(0, "\n");
+
+	/* Form pointer to containing struct, the pci control struct */
+	pci = to_instance(kobj);
+
+	/* decrement reference count on top main kobj */
+	kobject_put(edac_pci_top_main_kobj);
+
+	kfree(pci);	/* Free the control struct */
+}
+
+/* instance specific attribute structure */
+struct instance_attribute {
+	struct attribute attr;
+	ssize_t(*show) (struct edac_pci_ctl_info *, char *);
+	ssize_t(*store) (struct edac_pci_ctl_info *, const char *, size_t);
+};
+
+/* Function to 'show' fields from the edac_pci 'instance' structure */
+static ssize_t edac_pci_instance_show(struct kobject *kobj,
+				struct attribute *attr, char *buffer)
+{
+	struct edac_pci_ctl_info *pci = to_instance(kobj);
+	struct instance_attribute *instance_attr = to_instance_attr(attr);
+
+	if (instance_attr->show)
+		return instance_attr->show(pci, buffer);
+	return -EIO;
+}
+
+/* Function to 'store' fields into the edac_pci 'instance' structure */
+static ssize_t edac_pci_instance_store(struct kobject *kobj,
+				struct attribute *attr,
+				const char *buffer, size_t count)
+{
+	struct edac_pci_ctl_info *pci = to_instance(kobj);
+	struct instance_attribute *instance_attr = to_instance_attr(attr);
+
+	if (instance_attr->store)
+		return instance_attr->store(pci, buffer, count);
+	return -EIO;
+}
+
+/* fs_ops table */
+static const struct sysfs_ops pci_instance_ops = {
+	.show = edac_pci_instance_show,
+	.store = edac_pci_instance_store
+};
+
+#define INSTANCE_ATTR(_name, _mode, _show, _store)	\
+static struct instance_attribute attr_instance_##_name = {	\
+	.attr	= {.name = __stringify(_name), .mode = _mode },	\
+	.show	= _show,					\
+	.store	= _store,					\
+};
+
+INSTANCE_ATTR(pe_count, S_IRUGO, instance_pe_count_show, NULL);
+INSTANCE_ATTR(npe_count, S_IRUGO, instance_npe_count_show, NULL);
+
+/* pci instance attributes */
+static struct instance_attribute *pci_instance_attr[] = {
+	&attr_instance_pe_count,
+	&attr_instance_npe_count,
+	NULL
+};
+
+/* the ktype for a pci instance */
+static struct kobj_type ktype_pci_instance = {
+	.release = edac_pci_instance_release,
+	.sysfs_ops = &pci_instance_ops,
+	.default_attrs = (struct attribute **)pci_instance_attr,
+};
+
+/*
+ * edac_pci_create_instance_kobj
+ *
+ *	construct one EDAC PCI instance's kobject for use
+ */
+static int edac_pci_create_instance_kobj(struct edac_pci_ctl_info *pci, int idx)
+{
+	struct kobject *main_kobj;
+	int err;
+
+	edac_dbg(0, "\n");
+
+	/* First bump the ref count on the top main kobj, which will
+	 * track the number of PCI instances we have, and thus nest
+	 * properly on keeping the module loaded
+	 */
+	main_kobj = kobject_get(edac_pci_top_main_kobj);
+	if (!main_kobj) {
+		err = -ENODEV;
+		goto error_out;
+	}
+
+	/* And now register this new kobject under the main kobj */
+	err = kobject_init_and_add(&pci->kobj, &ktype_pci_instance,
+				   edac_pci_top_main_kobj, "pci%d", idx);
+	if (err != 0) {
+		edac_dbg(2, "failed to register instance pci%d\n", idx);
+		kobject_put(edac_pci_top_main_kobj);
+		goto error_out;
+	}
+
+	kobject_uevent(&pci->kobj, KOBJ_ADD);
+	edac_dbg(1, "Register instance 'pci%d' kobject\n", idx);
+
+	return 0;
+
+	/* Error unwind statck */
+error_out:
+	return err;
+}
+
+/*
+ * edac_pci_unregister_sysfs_instance_kobj
+ *
+ *	unregister the kobj for the EDAC PCI instance
+ */
+static void edac_pci_unregister_sysfs_instance_kobj(
+			struct edac_pci_ctl_info *pci)
+{
+	edac_dbg(0, "\n");
+
+	/* Unregister the instance kobject and allow its release
+	 * function release the main reference count and then
+	 * kfree the memory
+	 */
+	kobject_put(&pci->kobj);
+}
+
+/***************************** EDAC PCI sysfs root **********************/
+#define to_edacpci(k) container_of(k, struct edac_pci_ctl_info, kobj)
+#define to_edacpci_attr(a) container_of(a, struct edac_pci_attr, attr)
+
+/* simple show/store functions for attributes */
+static ssize_t edac_pci_int_show(void *ptr, char *buffer)
+{
+	int *value = ptr;
+	return sprintf(buffer, "%d\n", *value);
+}
+
+static ssize_t edac_pci_int_store(void *ptr, const char *buffer, size_t count)
+{
+	int *value = ptr;
+
+	if (isdigit(*buffer))
+		*value = simple_strtoul(buffer, NULL, 0);
+
+	return count;
+}
+
+struct edac_pci_dev_attribute {
+	struct attribute attr;
+	void *value;
+	 ssize_t(*show) (void *, char *);
+	 ssize_t(*store) (void *, const char *, size_t);
+};
+
+/* Set of show/store abstract level functions for PCI Parity object */
+static ssize_t edac_pci_dev_show(struct kobject *kobj, struct attribute *attr,
+				 char *buffer)
+{
+	struct edac_pci_dev_attribute *edac_pci_dev;
+	edac_pci_dev = (struct edac_pci_dev_attribute *)attr;
+
+	if (edac_pci_dev->show)
+		return edac_pci_dev->show(edac_pci_dev->value, buffer);
+	return -EIO;
+}
+
+static ssize_t edac_pci_dev_store(struct kobject *kobj,
+				struct attribute *attr, const char *buffer,
+				size_t count)
+{
+	struct edac_pci_dev_attribute *edac_pci_dev;
+	edac_pci_dev = (struct edac_pci_dev_attribute *)attr;
+
+	if (edac_pci_dev->store)
+		return edac_pci_dev->store(edac_pci_dev->value, buffer, count);
+	return -EIO;
+}
+
+static const struct sysfs_ops edac_pci_sysfs_ops = {
+	.show = edac_pci_dev_show,
+	.store = edac_pci_dev_store
+};
+
+#define EDAC_PCI_ATTR(_name,_mode,_show,_store)			\
+static struct edac_pci_dev_attribute edac_pci_attr_##_name = {		\
+	.attr = {.name = __stringify(_name), .mode = _mode },	\
+	.value  = &_name,					\
+	.show   = _show,					\
+	.store  = _store,					\
+};
+
+#define EDAC_PCI_STRING_ATTR(_name,_data,_mode,_show,_store)	\
+static struct edac_pci_dev_attribute edac_pci_attr_##_name = {		\
+	.attr = {.name = __stringify(_name), .mode = _mode },	\
+	.value  = _data,					\
+	.show   = _show,					\
+	.store  = _store,					\
+};
+
+/* PCI Parity control files */
+EDAC_PCI_ATTR(check_pci_errors, S_IRUGO | S_IWUSR, edac_pci_int_show,
+	edac_pci_int_store);
+EDAC_PCI_ATTR(edac_pci_log_pe, S_IRUGO | S_IWUSR, edac_pci_int_show,
+	edac_pci_int_store);
+EDAC_PCI_ATTR(edac_pci_log_npe, S_IRUGO | S_IWUSR, edac_pci_int_show,
+	edac_pci_int_store);
+EDAC_PCI_ATTR(edac_pci_panic_on_pe, S_IRUGO | S_IWUSR, edac_pci_int_show,
+	edac_pci_int_store);
+EDAC_PCI_ATTR(pci_parity_count, S_IRUGO, edac_pci_int_show, NULL);
+EDAC_PCI_ATTR(pci_nonparity_count, S_IRUGO, edac_pci_int_show, NULL);
+
+/* Base Attributes of the memory ECC object */
+static struct edac_pci_dev_attribute *edac_pci_attr[] = {
+	&edac_pci_attr_check_pci_errors,
+	&edac_pci_attr_edac_pci_log_pe,
+	&edac_pci_attr_edac_pci_log_npe,
+	&edac_pci_attr_edac_pci_panic_on_pe,
+	&edac_pci_attr_pci_parity_count,
+	&edac_pci_attr_pci_nonparity_count,
+	NULL,
+};
+
+/*
+ * edac_pci_release_main_kobj
+ *
+ *	This release function is called when the reference count to the
+ *	passed kobj goes to zero.
+ *
+ *	This kobj is the 'main' kobject that EDAC PCI instances
+ *	link to, and thus provide for proper nesting counts
+ */
+static void edac_pci_release_main_kobj(struct kobject *kobj)
+{
+	edac_dbg(0, "here to module_put(THIS_MODULE)\n");
+
+	kfree(kobj);
+
+	/* last reference to top EDAC PCI kobject has been removed,
+	 * NOW release our ref count on the core module
+	 */
+	module_put(THIS_MODULE);
+}
+
+/* ktype struct for the EDAC PCI main kobj */
+static struct kobj_type ktype_edac_pci_main_kobj = {
+	.release = edac_pci_release_main_kobj,
+	.sysfs_ops = &edac_pci_sysfs_ops,
+	.default_attrs = (struct attribute **)edac_pci_attr,
+};
+
+/**
+ * edac_pci_main_kobj_setup: Setup the sysfs for EDAC PCI attributes.
+ */
+static int edac_pci_main_kobj_setup(void)
+{
+	int err;
+	struct bus_type *edac_subsys;
+
+	edac_dbg(0, "\n");
+
+	/* check and count if we have already created the main kobject */
+	if (atomic_inc_return(&edac_pci_sysfs_refcount) != 1)
+		return 0;
+
+	/* First time, so create the main kobject and its
+	 * controls and attributes
+	 */
+	edac_subsys = edac_get_sysfs_subsys();
+
+	/* Bump the reference count on this module to ensure the
+	 * modules isn't unloaded until we deconstruct the top
+	 * level main kobj for EDAC PCI
+	 */
+	if (!try_module_get(THIS_MODULE)) {
+		edac_dbg(1, "try_module_get() failed\n");
+		err = -ENODEV;
+		goto decrement_count_fail;
+	}
+
+	edac_pci_top_main_kobj = kzalloc(sizeof(struct kobject), GFP_KERNEL);
+	if (!edac_pci_top_main_kobj) {
+		edac_dbg(1, "Failed to allocate\n");
+		err = -ENOMEM;
+		goto kzalloc_fail;
+	}
+
+	/* Instanstiate the pci object */
+	err = kobject_init_and_add(edac_pci_top_main_kobj,
+				   &ktype_edac_pci_main_kobj,
+				   &edac_subsys->dev_root->kobj, "pci");
+	if (err) {
+		edac_dbg(1, "Failed to register '.../edac/pci'\n");
+		goto kobject_init_and_add_fail;
+	}
+
+	/* At this point, to 'release' the top level kobject
+	 * for EDAC PCI, then edac_pci_main_kobj_teardown()
+	 * must be used, for resources to be cleaned up properly
+	 */
+	kobject_uevent(edac_pci_top_main_kobj, KOBJ_ADD);
+	edac_dbg(1, "Registered '.../edac/pci' kobject\n");
+
+	return 0;
+
+	/* Error unwind statck */
+kobject_init_and_add_fail:
+	kobject_put(edac_pci_top_main_kobj);
+
+kzalloc_fail:
+	module_put(THIS_MODULE);
+
+decrement_count_fail:
+	/* if are on this error exit, nothing to tear down */
+	atomic_dec(&edac_pci_sysfs_refcount);
+
+	return err;
+}
+
+/*
+ * edac_pci_main_kobj_teardown()
+ *
+ *	if no longer linked (needed) remove the top level EDAC PCI
+ *	kobject with its controls and attributes
+ */
+static void edac_pci_main_kobj_teardown(void)
+{
+	edac_dbg(0, "\n");
+
+	/* Decrement the count and only if no more controller instances
+	 * are connected perform the unregisteration of the top level
+	 * main kobj
+	 */
+	if (atomic_dec_return(&edac_pci_sysfs_refcount) == 0) {
+		edac_dbg(0, "called kobject_put on main kobj\n");
+		kobject_put(edac_pci_top_main_kobj);
+	}
+}
+
+int edac_pci_create_sysfs(struct edac_pci_ctl_info *pci)
+{
+	int err;
+	struct kobject *edac_kobj = &pci->kobj;
+
+	edac_dbg(0, "idx=%d\n", pci->pci_idx);
+
+	/* create the top main EDAC PCI kobject, IF needed */
+	err = edac_pci_main_kobj_setup();
+	if (err)
+		return err;
+
+	/* Create this instance's kobject under the MAIN kobject */
+	err = edac_pci_create_instance_kobj(pci, pci->pci_idx);
+	if (err)
+		goto unregister_cleanup;
+
+	err = sysfs_create_link(edac_kobj, &pci->dev->kobj, EDAC_PCI_SYMLINK);
+	if (err) {
+		edac_dbg(0, "sysfs_create_link() returned err= %d\n", err);
+		goto symlink_fail;
+	}
+
+	return 0;
+
+	/* Error unwind stack */
+symlink_fail:
+	edac_pci_unregister_sysfs_instance_kobj(pci);
+
+unregister_cleanup:
+	edac_pci_main_kobj_teardown();
+
+	return err;
+}
+
+void edac_pci_remove_sysfs(struct edac_pci_ctl_info *pci)
+{
+	edac_dbg(0, "index=%d\n", pci->pci_idx);
+
+	/* Remove the symlink */
+	sysfs_remove_link(&pci->kobj, EDAC_PCI_SYMLINK);
+
+	/* remove this PCI instance's sysfs entries */
+	edac_pci_unregister_sysfs_instance_kobj(pci);
+
+	/* Call the main unregister function, which will determine
+	 * if this 'pci' is the last instance.
+	 * If it is, the main kobject will be unregistered as a result
+	 */
+	edac_dbg(0, "calling edac_pci_main_kobj_teardown()\n");
+	edac_pci_main_kobj_teardown();
+}
+
+/************************ PCI error handling *************************/
+static u16 get_pci_parity_status(struct pci_dev *dev, int secondary)
+{
+	int where;
+	u16 status;
+
+	where = secondary ? PCI_SEC_STATUS : PCI_STATUS;
+	pci_read_config_word(dev, where, &status);
+
+	/* If we get back 0xFFFF then we must suspect that the card has been
+	 * pulled but the Linux PCI layer has not yet finished cleaning up.
+	 * We don't want to report on such devices
+	 */
+
+	if (status == 0xFFFF) {
+		u32 sanity;
+
+		pci_read_config_dword(dev, 0, &sanity);
+
+		if (sanity == 0xFFFFFFFF)
+			return 0;
+	}
+
+	status &= PCI_STATUS_DETECTED_PARITY | PCI_STATUS_SIG_SYSTEM_ERROR |
+		PCI_STATUS_PARITY;
+
+	if (status)
+		/* reset only the bits we are interested in */
+		pci_write_config_word(dev, where, status);
+
+	return status;
+}
+
+
+/* Clear any PCI parity errors logged by this device. */
+static void edac_pci_dev_parity_clear(struct pci_dev *dev)
+{
+	u8 header_type;
+
+	get_pci_parity_status(dev, 0);
+
+	/* read the device TYPE, looking for bridges */
+	pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
+
+	if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE)
+		get_pci_parity_status(dev, 1);
+}
+
+/*
+ *  PCI Parity polling
+ *
+ *	Function to retrieve the current parity status
+ *	and decode it
+ *
+ */
+static void edac_pci_dev_parity_test(struct pci_dev *dev)
+{
+	unsigned long flags;
+	u16 status;
+	u8 header_type;
+
+	/* stop any interrupts until we can acquire the status */
+	local_irq_save(flags);
+
+	/* read the STATUS register on this device */
+	status = get_pci_parity_status(dev, 0);
+
+	/* read the device TYPE, looking for bridges */
+	pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
+
+	local_irq_restore(flags);
+
+	edac_dbg(4, "PCI STATUS= 0x%04x %s\n", status, dev_name(&dev->dev));
+
+	/* check the status reg for errors on boards NOT marked as broken
+	 * if broken, we cannot trust any of the status bits
+	 */
+	if (status && !dev->broken_parity_status) {
+		if (status & (PCI_STATUS_SIG_SYSTEM_ERROR)) {
+			edac_printk(KERN_CRIT, EDAC_PCI,
+				"Signaled System Error on %s\n",
+				pci_name(dev));
+			atomic_inc(&pci_nonparity_count);
+		}
+
+		if (status & (PCI_STATUS_PARITY)) {
+			edac_printk(KERN_CRIT, EDAC_PCI,
+				"Master Data Parity Error on %s\n",
+				pci_name(dev));
+
+			atomic_inc(&pci_parity_count);
+		}
+
+		if (status & (PCI_STATUS_DETECTED_PARITY)) {
+			edac_printk(KERN_CRIT, EDAC_PCI,
+				"Detected Parity Error on %s\n",
+				pci_name(dev));
+
+			atomic_inc(&pci_parity_count);
+		}
+	}
+
+
+	edac_dbg(4, "PCI HEADER TYPE= 0x%02x %s\n",
+		 header_type, dev_name(&dev->dev));
+
+	if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+		/* On bridges, need to examine secondary status register  */
+		status = get_pci_parity_status(dev, 1);
+
+		edac_dbg(4, "PCI SEC_STATUS= 0x%04x %s\n",
+			 status, dev_name(&dev->dev));
+
+		/* check the secondary status reg for errors,
+		 * on NOT broken boards
+		 */
+		if (status && !dev->broken_parity_status) {
+			if (status & (PCI_STATUS_SIG_SYSTEM_ERROR)) {
+				edac_printk(KERN_CRIT, EDAC_PCI, "Bridge "
+					"Signaled System Error on %s\n",
+					pci_name(dev));
+				atomic_inc(&pci_nonparity_count);
+			}
+
+			if (status & (PCI_STATUS_PARITY)) {
+				edac_printk(KERN_CRIT, EDAC_PCI, "Bridge "
+					"Master Data Parity Error on "
+					"%s\n", pci_name(dev));
+
+				atomic_inc(&pci_parity_count);
+			}
+
+			if (status & (PCI_STATUS_DETECTED_PARITY)) {
+				edac_printk(KERN_CRIT, EDAC_PCI, "Bridge "
+					"Detected Parity Error on %s\n",
+					pci_name(dev));
+
+				atomic_inc(&pci_parity_count);
+			}
+		}
+	}
+}
+
+/* reduce some complexity in definition of the iterator */
+typedef void (*pci_parity_check_fn_t) (struct pci_dev *dev);
+
+/*
+ * pci_dev parity list iterator
+ *
+ *	Scan the PCI device list looking for SERRORs, Master Parity ERRORS or
+ *	Parity ERRORs on primary or secondary devices.
+ */
+static inline void edac_pci_dev_parity_iterator(pci_parity_check_fn_t fn)
+{
+	struct pci_dev *dev = NULL;
+
+	for_each_pci_dev(dev)
+		fn(dev);
+}
+
+/*
+ * edac_pci_do_parity_check
+ *
+ *	performs the actual PCI parity check operation
+ */
+void edac_pci_do_parity_check(void)
+{
+	int before_count;
+
+	edac_dbg(3, "\n");
+
+	/* if policy has PCI check off, leave now */
+	if (!check_pci_errors)
+		return;
+
+	before_count = atomic_read(&pci_parity_count);
+
+	/* scan all PCI devices looking for a Parity Error on devices and
+	 * bridges.
+	 * The iterator calls pci_get_device() which might sleep, thus
+	 * we cannot disable interrupts in this scan.
+	 */
+	edac_pci_dev_parity_iterator(edac_pci_dev_parity_test);
+
+	/* Only if operator has selected panic on PCI Error */
+	if (edac_pci_get_panic_on_pe()) {
+		/* If the count is different 'after' from 'before' */
+		if (before_count != atomic_read(&pci_parity_count))
+			panic("EDAC: PCI Parity Error");
+	}
+}
+
+/*
+ * edac_pci_clear_parity_errors
+ *
+ *	function to perform an iteration over the PCI devices
+ *	and clearn their current status
+ */
+void edac_pci_clear_parity_errors(void)
+{
+	/* Clear any PCI bus parity errors that devices initially have logged
+	 * in their registers.
+	 */
+	edac_pci_dev_parity_iterator(edac_pci_dev_parity_clear);
+}
+
+/*
+ * edac_pci_handle_pe
+ *
+ *	Called to handle a PARITY ERROR event
+ */
+void edac_pci_handle_pe(struct edac_pci_ctl_info *pci, const char *msg)
+{
+
+	/* global PE counter incremented by edac_pci_do_parity_check() */
+	atomic_inc(&pci->counters.pe_count);
+
+	if (edac_pci_get_log_pe())
+		edac_pci_printk(pci, KERN_WARNING,
+				"Parity Error ctl: %s %d: %s\n",
+				pci->ctl_name, pci->pci_idx, msg);
+
+	/*
+	 * poke all PCI devices and see which one is the troublemaker
+	 * panic() is called if set
+	 */
+	edac_pci_do_parity_check();
+}
+EXPORT_SYMBOL_GPL(edac_pci_handle_pe);
+
+
+/*
+ * edac_pci_handle_npe
+ *
+ *	Called to handle a NON-PARITY ERROR event
+ */
+void edac_pci_handle_npe(struct edac_pci_ctl_info *pci, const char *msg)
+{
+
+	/* global NPE counter incremented by edac_pci_do_parity_check() */
+	atomic_inc(&pci->counters.npe_count);
+
+	if (edac_pci_get_log_npe())
+		edac_pci_printk(pci, KERN_WARNING,
+				"Non-Parity Error ctl: %s %d: %s\n",
+				pci->ctl_name, pci->pci_idx, msg);
+
+	/*
+	 * poke all PCI devices and see which one is the troublemaker
+	 * panic() is called if set
+	 */
+	edac_pci_do_parity_check();
+}
+EXPORT_SYMBOL_GPL(edac_pci_handle_npe);
+
+/*
+ * Define the PCI parameter to the module
+ */
+module_param(check_pci_errors, int, 0644);
+MODULE_PARM_DESC(check_pci_errors,
+		 "Check for PCI bus parity errors: 0=off 1=on");
+module_param(edac_pci_panic_on_pe, int, 0644);
+MODULE_PARM_DESC(edac_pci_panic_on_pe,
+		 "Panic on PCI Bus Parity error: 0=off 1=on");
diff --git a/drivers/edac/fsl_ddr_edac.c b/drivers/edac/fsl_ddr_edac.c
new file mode 100644
index 000000000..efc8276d1
--- /dev/null
+++ b/drivers/edac/fsl_ddr_edac.c
@@ -0,0 +1,632 @@
+/*
+ * Freescale Memory Controller kernel module
+ *
+ * Support Power-based SoCs including MPC85xx, MPC86xx, MPC83xx and
+ * ARM-based Layerscape SoCs including LS2xxx. Originally split
+ * out from mpc85xx_edac EDAC driver.
+ *
+ * Parts Copyrighted (c) 2013 by Freescale Semiconductor, Inc.
+ *
+ * Author: Dave Jiang <djiang@mvista.com>
+ *
+ * 2006-2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ctype.h>
+#include <linux/io.h>
+#include <linux/mod_devicetable.h>
+#include <linux/edac.h>
+#include <linux/smp.h>
+#include <linux/gfp.h>
+
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include "edac_module.h"
+#include "fsl_ddr_edac.h"
+
+#define EDAC_MOD_STR	"fsl_ddr_edac"
+
+static int edac_mc_idx;
+
+static u32 orig_ddr_err_disable;
+static u32 orig_ddr_err_sbe;
+static bool little_endian;
+
+static inline u32 ddr_in32(void __iomem *addr)
+{
+	return little_endian ? ioread32(addr) : ioread32be(addr);
+}
+
+static inline void ddr_out32(void __iomem *addr, u32 value)
+{
+	if (little_endian)
+		iowrite32(value, addr);
+	else
+		iowrite32be(value, addr);
+}
+
+/************************ MC SYSFS parts ***********************************/
+
+#define to_mci(k) container_of(k, struct mem_ctl_info, dev)
+
+static ssize_t fsl_mc_inject_data_hi_show(struct device *dev,
+					  struct device_attribute *mattr,
+					  char *data)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct fsl_mc_pdata *pdata = mci->pvt_info;
+	return sprintf(data, "0x%08x",
+		       ddr_in32(pdata->mc_vbase + FSL_MC_DATA_ERR_INJECT_HI));
+}
+
+static ssize_t fsl_mc_inject_data_lo_show(struct device *dev,
+					  struct device_attribute *mattr,
+					      char *data)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct fsl_mc_pdata *pdata = mci->pvt_info;
+	return sprintf(data, "0x%08x",
+		       ddr_in32(pdata->mc_vbase + FSL_MC_DATA_ERR_INJECT_LO));
+}
+
+static ssize_t fsl_mc_inject_ctrl_show(struct device *dev,
+				       struct device_attribute *mattr,
+					   char *data)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct fsl_mc_pdata *pdata = mci->pvt_info;
+	return sprintf(data, "0x%08x",
+		       ddr_in32(pdata->mc_vbase + FSL_MC_ECC_ERR_INJECT));
+}
+
+static ssize_t fsl_mc_inject_data_hi_store(struct device *dev,
+					   struct device_attribute *mattr,
+					       const char *data, size_t count)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct fsl_mc_pdata *pdata = mci->pvt_info;
+	unsigned long val;
+	int rc;
+
+	if (isdigit(*data)) {
+		rc = kstrtoul(data, 0, &val);
+		if (rc)
+			return rc;
+
+		ddr_out32(pdata->mc_vbase + FSL_MC_DATA_ERR_INJECT_HI, val);
+		return count;
+	}
+	return 0;
+}
+
+static ssize_t fsl_mc_inject_data_lo_store(struct device *dev,
+					   struct device_attribute *mattr,
+					       const char *data, size_t count)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct fsl_mc_pdata *pdata = mci->pvt_info;
+	unsigned long val;
+	int rc;
+
+	if (isdigit(*data)) {
+		rc = kstrtoul(data, 0, &val);
+		if (rc)
+			return rc;
+
+		ddr_out32(pdata->mc_vbase + FSL_MC_DATA_ERR_INJECT_LO, val);
+		return count;
+	}
+	return 0;
+}
+
+static ssize_t fsl_mc_inject_ctrl_store(struct device *dev,
+					struct device_attribute *mattr,
+					       const char *data, size_t count)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct fsl_mc_pdata *pdata = mci->pvt_info;
+	unsigned long val;
+	int rc;
+
+	if (isdigit(*data)) {
+		rc = kstrtoul(data, 0, &val);
+		if (rc)
+			return rc;
+
+		ddr_out32(pdata->mc_vbase + FSL_MC_ECC_ERR_INJECT, val);
+		return count;
+	}
+	return 0;
+}
+
+static DEVICE_ATTR(inject_data_hi, S_IRUGO | S_IWUSR,
+		   fsl_mc_inject_data_hi_show, fsl_mc_inject_data_hi_store);
+static DEVICE_ATTR(inject_data_lo, S_IRUGO | S_IWUSR,
+		   fsl_mc_inject_data_lo_show, fsl_mc_inject_data_lo_store);
+static DEVICE_ATTR(inject_ctrl, S_IRUGO | S_IWUSR,
+		   fsl_mc_inject_ctrl_show, fsl_mc_inject_ctrl_store);
+
+static struct attribute *fsl_ddr_dev_attrs[] = {
+	&dev_attr_inject_data_hi.attr,
+	&dev_attr_inject_data_lo.attr,
+	&dev_attr_inject_ctrl.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(fsl_ddr_dev);
+
+/**************************** MC Err device ***************************/
+
+/*
+ * Taken from table 8-55 in the MPC8641 User's Manual and/or 9-61 in the
+ * MPC8572 User's Manual.  Each line represents a syndrome bit column as a
+ * 64-bit value, but split into an upper and lower 32-bit chunk.  The labels
+ * below correspond to Freescale's manuals.
+ */
+static unsigned int ecc_table[16] = {
+	/* MSB           LSB */
+	/* [0:31]    [32:63] */
+	0xf00fe11e, 0xc33c0ff7,	/* Syndrome bit 7 */
+	0x00ff00ff, 0x00fff0ff,
+	0x0f0f0f0f, 0x0f0fff00,
+	0x11113333, 0x7777000f,
+	0x22224444, 0x8888222f,
+	0x44448888, 0xffff4441,
+	0x8888ffff, 0x11118882,
+	0xffff1111, 0x22221114,	/* Syndrome bit 0 */
+};
+
+/*
+ * Calculate the correct ECC value for a 64-bit value specified by high:low
+ */
+static u8 calculate_ecc(u32 high, u32 low)
+{
+	u32 mask_low;
+	u32 mask_high;
+	int bit_cnt;
+	u8 ecc = 0;
+	int i;
+	int j;
+
+	for (i = 0; i < 8; i++) {
+		mask_high = ecc_table[i * 2];
+		mask_low = ecc_table[i * 2 + 1];
+		bit_cnt = 0;
+
+		for (j = 0; j < 32; j++) {
+			if ((mask_high >> j) & 1)
+				bit_cnt ^= (high >> j) & 1;
+			if ((mask_low >> j) & 1)
+				bit_cnt ^= (low >> j) & 1;
+		}
+
+		ecc |= bit_cnt << i;
+	}
+
+	return ecc;
+}
+
+/*
+ * Create the syndrome code which is generated if the data line specified by
+ * 'bit' failed.  Eg generate an 8-bit codes seen in Table 8-55 in the MPC8641
+ * User's Manual and 9-61 in the MPC8572 User's Manual.
+ */
+static u8 syndrome_from_bit(unsigned int bit) {
+	int i;
+	u8 syndrome = 0;
+
+	/*
+	 * Cycle through the upper or lower 32-bit portion of each value in
+	 * ecc_table depending on if 'bit' is in the upper or lower half of
+	 * 64-bit data.
+	 */
+	for (i = bit < 32; i < 16; i += 2)
+		syndrome |= ((ecc_table[i] >> (bit % 32)) & 1) << (i / 2);
+
+	return syndrome;
+}
+
+/*
+ * Decode data and ecc syndrome to determine what went wrong
+ * Note: This can only decode single-bit errors
+ */
+static void sbe_ecc_decode(u32 cap_high, u32 cap_low, u32 cap_ecc,
+		       int *bad_data_bit, int *bad_ecc_bit)
+{
+	int i;
+	u8 syndrome;
+
+	*bad_data_bit = -1;
+	*bad_ecc_bit = -1;
+
+	/*
+	 * Calculate the ECC of the captured data and XOR it with the captured
+	 * ECC to find an ECC syndrome value we can search for
+	 */
+	syndrome = calculate_ecc(cap_high, cap_low) ^ cap_ecc;
+
+	/* Check if a data line is stuck... */
+	for (i = 0; i < 64; i++) {
+		if (syndrome == syndrome_from_bit(i)) {
+			*bad_data_bit = i;
+			return;
+		}
+	}
+
+	/* If data is correct, check ECC bits for errors... */
+	for (i = 0; i < 8; i++) {
+		if ((syndrome >> i) & 0x1) {
+			*bad_ecc_bit = i;
+			return;
+		}
+	}
+}
+
+#define make64(high, low) (((u64)(high) << 32) | (low))
+
+static void fsl_mc_check(struct mem_ctl_info *mci)
+{
+	struct fsl_mc_pdata *pdata = mci->pvt_info;
+	struct csrow_info *csrow;
+	u32 bus_width;
+	u32 err_detect;
+	u32 syndrome;
+	u64 err_addr;
+	u32 pfn;
+	int row_index;
+	u32 cap_high;
+	u32 cap_low;
+	int bad_data_bit;
+	int bad_ecc_bit;
+
+	err_detect = ddr_in32(pdata->mc_vbase + FSL_MC_ERR_DETECT);
+	if (!err_detect)
+		return;
+
+	fsl_mc_printk(mci, KERN_ERR, "Err Detect Register: %#8.8x\n",
+		      err_detect);
+
+	/* no more processing if not ECC bit errors */
+	if (!(err_detect & (DDR_EDE_SBE | DDR_EDE_MBE))) {
+		ddr_out32(pdata->mc_vbase + FSL_MC_ERR_DETECT, err_detect);
+		return;
+	}
+
+	syndrome = ddr_in32(pdata->mc_vbase + FSL_MC_CAPTURE_ECC);
+
+	/* Mask off appropriate bits of syndrome based on bus width */
+	bus_width = (ddr_in32(pdata->mc_vbase + FSL_MC_DDR_SDRAM_CFG) &
+		     DSC_DBW_MASK) ? 32 : 64;
+	if (bus_width == 64)
+		syndrome &= 0xff;
+	else
+		syndrome &= 0xffff;
+
+	err_addr = make64(
+		ddr_in32(pdata->mc_vbase + FSL_MC_CAPTURE_EXT_ADDRESS),
+		ddr_in32(pdata->mc_vbase + FSL_MC_CAPTURE_ADDRESS));
+	pfn = err_addr >> PAGE_SHIFT;
+
+	for (row_index = 0; row_index < mci->nr_csrows; row_index++) {
+		csrow = mci->csrows[row_index];
+		if ((pfn >= csrow->first_page) && (pfn <= csrow->last_page))
+			break;
+	}
+
+	cap_high = ddr_in32(pdata->mc_vbase + FSL_MC_CAPTURE_DATA_HI);
+	cap_low = ddr_in32(pdata->mc_vbase + FSL_MC_CAPTURE_DATA_LO);
+
+	/*
+	 * Analyze single-bit errors on 64-bit wide buses
+	 * TODO: Add support for 32-bit wide buses
+	 */
+	if ((err_detect & DDR_EDE_SBE) && (bus_width == 64)) {
+		sbe_ecc_decode(cap_high, cap_low, syndrome,
+				&bad_data_bit, &bad_ecc_bit);
+
+		if (bad_data_bit != -1)
+			fsl_mc_printk(mci, KERN_ERR,
+				"Faulty Data bit: %d\n", bad_data_bit);
+		if (bad_ecc_bit != -1)
+			fsl_mc_printk(mci, KERN_ERR,
+				"Faulty ECC bit: %d\n", bad_ecc_bit);
+
+		fsl_mc_printk(mci, KERN_ERR,
+			"Expected Data / ECC:\t%#8.8x_%08x / %#2.2x\n",
+			cap_high ^ (1 << (bad_data_bit - 32)),
+			cap_low ^ (1 << bad_data_bit),
+			syndrome ^ (1 << bad_ecc_bit));
+	}
+
+	fsl_mc_printk(mci, KERN_ERR,
+			"Captured Data / ECC:\t%#8.8x_%08x / %#2.2x\n",
+			cap_high, cap_low, syndrome);
+	fsl_mc_printk(mci, KERN_ERR, "Err addr: %#8.8llx\n", err_addr);
+	fsl_mc_printk(mci, KERN_ERR, "PFN: %#8.8x\n", pfn);
+
+	/* we are out of range */
+	if (row_index == mci->nr_csrows)
+		fsl_mc_printk(mci, KERN_ERR, "PFN out of range!\n");
+
+	if (err_detect & DDR_EDE_SBE)
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+				     pfn, err_addr & ~PAGE_MASK, syndrome,
+				     row_index, 0, -1,
+				     mci->ctl_name, "");
+
+	if (err_detect & DDR_EDE_MBE)
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+				     pfn, err_addr & ~PAGE_MASK, syndrome,
+				     row_index, 0, -1,
+				     mci->ctl_name, "");
+
+	ddr_out32(pdata->mc_vbase + FSL_MC_ERR_DETECT, err_detect);
+}
+
+static irqreturn_t fsl_mc_isr(int irq, void *dev_id)
+{
+	struct mem_ctl_info *mci = dev_id;
+	struct fsl_mc_pdata *pdata = mci->pvt_info;
+	u32 err_detect;
+
+	err_detect = ddr_in32(pdata->mc_vbase + FSL_MC_ERR_DETECT);
+	if (!err_detect)
+		return IRQ_NONE;
+
+	fsl_mc_check(mci);
+
+	return IRQ_HANDLED;
+}
+
+static void fsl_ddr_init_csrows(struct mem_ctl_info *mci)
+{
+	struct fsl_mc_pdata *pdata = mci->pvt_info;
+	struct csrow_info *csrow;
+	struct dimm_info *dimm;
+	u32 sdram_ctl;
+	u32 sdtype;
+	enum mem_type mtype;
+	u32 cs_bnds;
+	int index;
+
+	sdram_ctl = ddr_in32(pdata->mc_vbase + FSL_MC_DDR_SDRAM_CFG);
+
+	sdtype = sdram_ctl & DSC_SDTYPE_MASK;
+	if (sdram_ctl & DSC_RD_EN) {
+		switch (sdtype) {
+		case 0x02000000:
+			mtype = MEM_RDDR;
+			break;
+		case 0x03000000:
+			mtype = MEM_RDDR2;
+			break;
+		case 0x07000000:
+			mtype = MEM_RDDR3;
+			break;
+		case 0x05000000:
+			mtype = MEM_RDDR4;
+			break;
+		default:
+			mtype = MEM_UNKNOWN;
+			break;
+		}
+	} else {
+		switch (sdtype) {
+		case 0x02000000:
+			mtype = MEM_DDR;
+			break;
+		case 0x03000000:
+			mtype = MEM_DDR2;
+			break;
+		case 0x07000000:
+			mtype = MEM_DDR3;
+			break;
+		case 0x05000000:
+			mtype = MEM_DDR4;
+			break;
+		default:
+			mtype = MEM_UNKNOWN;
+			break;
+		}
+	}
+
+	for (index = 0; index < mci->nr_csrows; index++) {
+		u32 start;
+		u32 end;
+
+		csrow = mci->csrows[index];
+		dimm = csrow->channels[0]->dimm;
+
+		cs_bnds = ddr_in32(pdata->mc_vbase + FSL_MC_CS_BNDS_0 +
+				   (index * FSL_MC_CS_BNDS_OFS));
+
+		start = (cs_bnds & 0xffff0000) >> 16;
+		end   = (cs_bnds & 0x0000ffff);
+
+		if (start == end)
+			continue;	/* not populated */
+
+		start <<= (24 - PAGE_SHIFT);
+		end   <<= (24 - PAGE_SHIFT);
+		end    |= (1 << (24 - PAGE_SHIFT)) - 1;
+
+		csrow->first_page = start;
+		csrow->last_page = end;
+
+		dimm->nr_pages = end + 1 - start;
+		dimm->grain = 8;
+		dimm->mtype = mtype;
+		dimm->dtype = DEV_UNKNOWN;
+		if (sdram_ctl & DSC_X32_EN)
+			dimm->dtype = DEV_X32;
+		dimm->edac_mode = EDAC_SECDED;
+	}
+}
+
+int fsl_mc_err_probe(struct platform_device *op)
+{
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[2];
+	struct fsl_mc_pdata *pdata;
+	struct resource r;
+	u32 sdram_ctl;
+	int res;
+
+	if (!devres_open_group(&op->dev, fsl_mc_err_probe, GFP_KERNEL))
+		return -ENOMEM;
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = 4;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = 1;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), layers,
+			    sizeof(*pdata));
+	if (!mci) {
+		devres_release_group(&op->dev, fsl_mc_err_probe);
+		return -ENOMEM;
+	}
+
+	pdata = mci->pvt_info;
+	pdata->name = "fsl_mc_err";
+	mci->pdev = &op->dev;
+	pdata->edac_idx = edac_mc_idx++;
+	dev_set_drvdata(mci->pdev, mci);
+	mci->ctl_name = pdata->name;
+	mci->dev_name = pdata->name;
+
+	/*
+	 * Get the endianness of DDR controller registers.
+	 * Default is big endian.
+	 */
+	little_endian = of_property_read_bool(op->dev.of_node, "little-endian");
+
+	res = of_address_to_resource(op->dev.of_node, 0, &r);
+	if (res) {
+		pr_err("%s: Unable to get resource for MC err regs\n",
+		       __func__);
+		goto err;
+	}
+
+	if (!devm_request_mem_region(&op->dev, r.start, resource_size(&r),
+				     pdata->name)) {
+		pr_err("%s: Error while requesting mem region\n",
+		       __func__);
+		res = -EBUSY;
+		goto err;
+	}
+
+	pdata->mc_vbase = devm_ioremap(&op->dev, r.start, resource_size(&r));
+	if (!pdata->mc_vbase) {
+		pr_err("%s: Unable to setup MC err regs\n", __func__);
+		res = -ENOMEM;
+		goto err;
+	}
+
+	sdram_ctl = ddr_in32(pdata->mc_vbase + FSL_MC_DDR_SDRAM_CFG);
+	if (!(sdram_ctl & DSC_ECC_EN)) {
+		/* no ECC */
+		pr_warn("%s: No ECC DIMMs discovered\n", __func__);
+		res = -ENODEV;
+		goto err;
+	}
+
+	edac_dbg(3, "init mci\n");
+	mci->mtype_cap = MEM_FLAG_DDR | MEM_FLAG_RDDR |
+			 MEM_FLAG_DDR2 | MEM_FLAG_RDDR2 |
+			 MEM_FLAG_DDR3 | MEM_FLAG_RDDR3 |
+			 MEM_FLAG_DDR4 | MEM_FLAG_RDDR4;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->mod_name = EDAC_MOD_STR;
+
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		mci->edac_check = fsl_mc_check;
+
+	mci->ctl_page_to_phys = NULL;
+
+	mci->scrub_mode = SCRUB_SW_SRC;
+
+	fsl_ddr_init_csrows(mci);
+
+	/* store the original error disable bits */
+	orig_ddr_err_disable = ddr_in32(pdata->mc_vbase + FSL_MC_ERR_DISABLE);
+	ddr_out32(pdata->mc_vbase + FSL_MC_ERR_DISABLE, 0);
+
+	/* clear all error bits */
+	ddr_out32(pdata->mc_vbase + FSL_MC_ERR_DETECT, ~0);
+
+	res = edac_mc_add_mc_with_groups(mci, fsl_ddr_dev_groups);
+	if (res) {
+		edac_dbg(3, "failed edac_mc_add_mc()\n");
+		goto err;
+	}
+
+	if (edac_op_state == EDAC_OPSTATE_INT) {
+		ddr_out32(pdata->mc_vbase + FSL_MC_ERR_INT_EN,
+			  DDR_EIE_MBEE | DDR_EIE_SBEE);
+
+		/* store the original error management threshold */
+		orig_ddr_err_sbe = ddr_in32(pdata->mc_vbase +
+					    FSL_MC_ERR_SBE) & 0xff0000;
+
+		/* set threshold to 1 error per interrupt */
+		ddr_out32(pdata->mc_vbase + FSL_MC_ERR_SBE, 0x10000);
+
+		/* register interrupts */
+		pdata->irq = platform_get_irq(op, 0);
+		res = devm_request_irq(&op->dev, pdata->irq,
+				       fsl_mc_isr,
+				       IRQF_SHARED,
+				       "[EDAC] MC err", mci);
+		if (res < 0) {
+			pr_err("%s: Unable to request irq %d for FSL DDR DRAM ERR\n",
+			       __func__, pdata->irq);
+			res = -ENODEV;
+			goto err2;
+		}
+
+		pr_info(EDAC_MOD_STR " acquired irq %d for MC\n",
+		       pdata->irq);
+	}
+
+	devres_remove_group(&op->dev, fsl_mc_err_probe);
+	edac_dbg(3, "success\n");
+	pr_info(EDAC_MOD_STR " MC err registered\n");
+
+	return 0;
+
+err2:
+	edac_mc_del_mc(&op->dev);
+err:
+	devres_release_group(&op->dev, fsl_mc_err_probe);
+	edac_mc_free(mci);
+	return res;
+}
+
+int fsl_mc_err_remove(struct platform_device *op)
+{
+	struct mem_ctl_info *mci = dev_get_drvdata(&op->dev);
+	struct fsl_mc_pdata *pdata = mci->pvt_info;
+
+	edac_dbg(0, "\n");
+
+	if (edac_op_state == EDAC_OPSTATE_INT) {
+		ddr_out32(pdata->mc_vbase + FSL_MC_ERR_INT_EN, 0);
+	}
+
+	ddr_out32(pdata->mc_vbase + FSL_MC_ERR_DISABLE,
+		  orig_ddr_err_disable);
+	ddr_out32(pdata->mc_vbase + FSL_MC_ERR_SBE, orig_ddr_err_sbe);
+
+	edac_mc_del_mc(&op->dev);
+	edac_mc_free(mci);
+	return 0;
+}
diff --git a/drivers/edac/fsl_ddr_edac.h b/drivers/edac/fsl_ddr_edac.h
new file mode 100644
index 000000000..4ccee292e
--- /dev/null
+++ b/drivers/edac/fsl_ddr_edac.h
@@ -0,0 +1,79 @@
+/*
+ * Freescale Memory Controller kernel module
+ *
+ * Support  Power-based SoCs including MPC85xx, MPC86xx, MPC83xx and
+ * ARM-based Layerscape SoCs including LS2xxx. Originally split
+ * out from mpc85xx_edac EDAC driver.
+ *
+ * Author: Dave Jiang <djiang@mvista.com>
+ *
+ * 2006-2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+#ifndef _FSL_DDR_EDAC_H_
+#define _FSL_DDR_EDAC_H_
+
+#define fsl_mc_printk(mci, level, fmt, arg...) \
+	edac_mc_chipset_printk(mci, level, "FSL_DDR", fmt, ##arg)
+
+/*
+ * DRAM error defines
+ */
+
+/* DDR_SDRAM_CFG */
+#define FSL_MC_DDR_SDRAM_CFG	0x0110
+#define FSL_MC_CS_BNDS_0		0x0000
+#define FSL_MC_CS_BNDS_OFS		0x0008
+
+#define FSL_MC_DATA_ERR_INJECT_HI	0x0e00
+#define FSL_MC_DATA_ERR_INJECT_LO	0x0e04
+#define FSL_MC_ECC_ERR_INJECT	0x0e08
+#define FSL_MC_CAPTURE_DATA_HI	0x0e20
+#define FSL_MC_CAPTURE_DATA_LO	0x0e24
+#define FSL_MC_CAPTURE_ECC		0x0e28
+#define FSL_MC_ERR_DETECT		0x0e40
+#define FSL_MC_ERR_DISABLE		0x0e44
+#define FSL_MC_ERR_INT_EN		0x0e48
+#define FSL_MC_CAPTURE_ATRIBUTES	0x0e4c
+#define FSL_MC_CAPTURE_ADDRESS	0x0e50
+#define FSL_MC_CAPTURE_EXT_ADDRESS	0x0e54
+#define FSL_MC_ERR_SBE		0x0e58
+
+#define DSC_MEM_EN	0x80000000
+#define DSC_ECC_EN	0x20000000
+#define DSC_RD_EN	0x10000000
+#define DSC_DBW_MASK	0x00180000
+#define DSC_DBW_32	0x00080000
+#define DSC_DBW_64	0x00000000
+
+#define DSC_SDTYPE_MASK		0x07000000
+#define DSC_X32_EN	0x00000020
+
+/* Err_Int_En */
+#define DDR_EIE_MSEE	0x1	/* memory select */
+#define DDR_EIE_SBEE	0x4	/* single-bit ECC error */
+#define DDR_EIE_MBEE	0x8	/* multi-bit ECC error */
+
+/* Err_Detect */
+#define DDR_EDE_MSE		0x1	/* memory select */
+#define DDR_EDE_SBE		0x4	/* single-bit ECC error */
+#define DDR_EDE_MBE		0x8	/* multi-bit ECC error */
+#define DDR_EDE_MME		0x80000000	/* multiple memory errors */
+
+/* Err_Disable */
+#define DDR_EDI_MSED	0x1	/* memory select disable */
+#define	DDR_EDI_SBED	0x4	/* single-bit ECC error disable */
+#define	DDR_EDI_MBED	0x8	/* multi-bit ECC error disable */
+
+struct fsl_mc_pdata {
+	char *name;
+	int edac_idx;
+	void __iomem *mc_vbase;
+	int irq;
+};
+int fsl_mc_err_probe(struct platform_device *op);
+int fsl_mc_err_remove(struct platform_device *op);
+#endif
diff --git a/drivers/edac/ghes_edac.c b/drivers/edac/ghes_edac.c
new file mode 100644
index 000000000..78c339da1
--- /dev/null
+++ b/drivers/edac/ghes_edac.c
@@ -0,0 +1,548 @@
+/*
+ * GHES/EDAC Linux driver
+ *
+ * This file may be distributed under the terms of the GNU General Public
+ * License version 2.
+ *
+ * Copyright (c) 2013 by Mauro Carvalho Chehab
+ *
+ * Red Hat Inc. http://www.redhat.com
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <acpi/ghes.h>
+#include <linux/edac.h>
+#include <linux/dmi.h>
+#include "edac_module.h"
+#include <ras/ras_event.h>
+
+struct ghes_edac_pvt {
+	struct list_head list;
+	struct ghes *ghes;
+	struct mem_ctl_info *mci;
+
+	/* Buffers for the error handling routine */
+	char detail_location[240];
+	char other_detail[160];
+	char msg[80];
+};
+
+static atomic_t ghes_init = ATOMIC_INIT(0);
+static struct ghes_edac_pvt *ghes_pvt;
+
+/*
+ * Sync with other, potentially concurrent callers of
+ * ghes_edac_report_mem_error(). We don't know what the
+ * "inventive" firmware would do.
+ */
+static DEFINE_SPINLOCK(ghes_lock);
+
+/* "ghes_edac.force_load=1" skips the platform check */
+static bool __read_mostly force_load;
+module_param(force_load, bool, 0);
+
+/* Memory Device - Type 17 of SMBIOS spec */
+struct memdev_dmi_entry {
+	u8 type;
+	u8 length;
+	u16 handle;
+	u16 phys_mem_array_handle;
+	u16 mem_err_info_handle;
+	u16 total_width;
+	u16 data_width;
+	u16 size;
+	u8 form_factor;
+	u8 device_set;
+	u8 device_locator;
+	u8 bank_locator;
+	u8 memory_type;
+	u16 type_detail;
+	u16 speed;
+	u8 manufacturer;
+	u8 serial_number;
+	u8 asset_tag;
+	u8 part_number;
+	u8 attributes;
+	u32 extended_size;
+	u16 conf_mem_clk_speed;
+} __attribute__((__packed__));
+
+struct ghes_edac_dimm_fill {
+	struct mem_ctl_info *mci;
+	unsigned count;
+};
+
+static void ghes_edac_count_dimms(const struct dmi_header *dh, void *arg)
+{
+	int *num_dimm = arg;
+
+	if (dh->type == DMI_ENTRY_MEM_DEVICE)
+		(*num_dimm)++;
+}
+
+static void ghes_edac_dmidecode(const struct dmi_header *dh, void *arg)
+{
+	struct ghes_edac_dimm_fill *dimm_fill = arg;
+	struct mem_ctl_info *mci = dimm_fill->mci;
+
+	if (dh->type == DMI_ENTRY_MEM_DEVICE) {
+		struct memdev_dmi_entry *entry = (struct memdev_dmi_entry *)dh;
+		struct dimm_info *dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
+						       mci->n_layers,
+						       dimm_fill->count, 0, 0);
+		u16 rdr_mask = BIT(7) | BIT(13);
+
+		if (entry->size == 0xffff) {
+			pr_info("Can't get DIMM%i size\n",
+				dimm_fill->count);
+			dimm->nr_pages = MiB_TO_PAGES(32);/* Unknown */
+		} else if (entry->size == 0x7fff) {
+			dimm->nr_pages = MiB_TO_PAGES(entry->extended_size);
+		} else {
+			if (entry->size & BIT(15))
+				dimm->nr_pages = MiB_TO_PAGES((entry->size & 0x7fff) << 10);
+			else
+				dimm->nr_pages = MiB_TO_PAGES(entry->size);
+		}
+
+		switch (entry->memory_type) {
+		case 0x12:
+			if (entry->type_detail & BIT(13))
+				dimm->mtype = MEM_RDDR;
+			else
+				dimm->mtype = MEM_DDR;
+			break;
+		case 0x13:
+			if (entry->type_detail & BIT(13))
+				dimm->mtype = MEM_RDDR2;
+			else
+				dimm->mtype = MEM_DDR2;
+			break;
+		case 0x14:
+			dimm->mtype = MEM_FB_DDR2;
+			break;
+		case 0x18:
+			if (entry->type_detail & BIT(12))
+				dimm->mtype = MEM_NVDIMM;
+			else if (entry->type_detail & BIT(13))
+				dimm->mtype = MEM_RDDR3;
+			else
+				dimm->mtype = MEM_DDR3;
+			break;
+		case 0x1a:
+			if (entry->type_detail & BIT(12))
+				dimm->mtype = MEM_NVDIMM;
+			else if (entry->type_detail & BIT(13))
+				dimm->mtype = MEM_RDDR4;
+			else
+				dimm->mtype = MEM_DDR4;
+			break;
+		default:
+			if (entry->type_detail & BIT(6))
+				dimm->mtype = MEM_RMBS;
+			else if ((entry->type_detail & rdr_mask) == rdr_mask)
+				dimm->mtype = MEM_RDR;
+			else if (entry->type_detail & BIT(7))
+				dimm->mtype = MEM_SDR;
+			else if (entry->type_detail & BIT(9))
+				dimm->mtype = MEM_EDO;
+			else
+				dimm->mtype = MEM_UNKNOWN;
+		}
+
+		/*
+		 * Actually, we can only detect if the memory has bits for
+		 * checksum or not
+		 */
+		if (entry->total_width == entry->data_width)
+			dimm->edac_mode = EDAC_NONE;
+		else
+			dimm->edac_mode = EDAC_SECDED;
+
+		dimm->dtype = DEV_UNKNOWN;
+		dimm->grain = 128;		/* Likely, worse case */
+
+		/*
+		 * FIXME: It shouldn't be hard to also fill the DIMM labels
+		 */
+
+		if (dimm->nr_pages) {
+			edac_dbg(1, "DIMM%i: %s size = %d MB%s\n",
+				dimm_fill->count, edac_mem_types[dimm->mtype],
+				PAGES_TO_MiB(dimm->nr_pages),
+				(dimm->edac_mode != EDAC_NONE) ? "(ECC)" : "");
+			edac_dbg(2, "\ttype %d, detail 0x%02x, width %d(total %d)\n",
+				entry->memory_type, entry->type_detail,
+				entry->total_width, entry->data_width);
+		}
+
+		dimm_fill->count++;
+	}
+}
+
+void ghes_edac_report_mem_error(int sev, struct cper_sec_mem_err *mem_err)
+{
+	enum hw_event_mc_err_type type;
+	struct edac_raw_error_desc *e;
+	struct mem_ctl_info *mci;
+	struct ghes_edac_pvt *pvt = ghes_pvt;
+	unsigned long flags;
+	char *p;
+	u8 grain_bits;
+
+	if (!pvt)
+		return;
+
+	/*
+	 * We can do the locking below because GHES defers error processing
+	 * from NMI to IRQ context. Whenever that changes, we'd at least
+	 * know.
+	 */
+	if (WARN_ON_ONCE(in_nmi()))
+		return;
+
+	spin_lock_irqsave(&ghes_lock, flags);
+
+	mci = pvt->mci;
+	e = &mci->error_desc;
+
+	/* Cleans the error report buffer */
+	memset(e, 0, sizeof (*e));
+	e->error_count = 1;
+	e->grain = 1;
+	strcpy(e->label, "unknown label");
+	e->msg = pvt->msg;
+	e->other_detail = pvt->other_detail;
+	e->top_layer = -1;
+	e->mid_layer = -1;
+	e->low_layer = -1;
+	*pvt->other_detail = '\0';
+	*pvt->msg = '\0';
+
+	switch (sev) {
+	case GHES_SEV_CORRECTED:
+		type = HW_EVENT_ERR_CORRECTED;
+		break;
+	case GHES_SEV_RECOVERABLE:
+		type = HW_EVENT_ERR_UNCORRECTED;
+		break;
+	case GHES_SEV_PANIC:
+		type = HW_EVENT_ERR_FATAL;
+		break;
+	default:
+	case GHES_SEV_NO:
+		type = HW_EVENT_ERR_INFO;
+	}
+
+	edac_dbg(1, "error validation_bits: 0x%08llx\n",
+		 (long long)mem_err->validation_bits);
+
+	/* Error type, mapped on e->msg */
+	if (mem_err->validation_bits & CPER_MEM_VALID_ERROR_TYPE) {
+		p = pvt->msg;
+		switch (mem_err->error_type) {
+		case 0:
+			p += sprintf(p, "Unknown");
+			break;
+		case 1:
+			p += sprintf(p, "No error");
+			break;
+		case 2:
+			p += sprintf(p, "Single-bit ECC");
+			break;
+		case 3:
+			p += sprintf(p, "Multi-bit ECC");
+			break;
+		case 4:
+			p += sprintf(p, "Single-symbol ChipKill ECC");
+			break;
+		case 5:
+			p += sprintf(p, "Multi-symbol ChipKill ECC");
+			break;
+		case 6:
+			p += sprintf(p, "Master abort");
+			break;
+		case 7:
+			p += sprintf(p, "Target abort");
+			break;
+		case 8:
+			p += sprintf(p, "Parity Error");
+			break;
+		case 9:
+			p += sprintf(p, "Watchdog timeout");
+			break;
+		case 10:
+			p += sprintf(p, "Invalid address");
+			break;
+		case 11:
+			p += sprintf(p, "Mirror Broken");
+			break;
+		case 12:
+			p += sprintf(p, "Memory Sparing");
+			break;
+		case 13:
+			p += sprintf(p, "Scrub corrected error");
+			break;
+		case 14:
+			p += sprintf(p, "Scrub uncorrected error");
+			break;
+		case 15:
+			p += sprintf(p, "Physical Memory Map-out event");
+			break;
+		default:
+			p += sprintf(p, "reserved error (%d)",
+				     mem_err->error_type);
+		}
+	} else {
+		strcpy(pvt->msg, "unknown error");
+	}
+
+	/* Error address */
+	if (mem_err->validation_bits & CPER_MEM_VALID_PA) {
+		e->page_frame_number = mem_err->physical_addr >> PAGE_SHIFT;
+		e->offset_in_page = mem_err->physical_addr & ~PAGE_MASK;
+	}
+
+	/* Error grain */
+	if (mem_err->validation_bits & CPER_MEM_VALID_PA_MASK)
+		e->grain = ~mem_err->physical_addr_mask + 1;
+
+	/* Memory error location, mapped on e->location */
+	p = e->location;
+	if (mem_err->validation_bits & CPER_MEM_VALID_NODE)
+		p += sprintf(p, "node:%d ", mem_err->node);
+	if (mem_err->validation_bits & CPER_MEM_VALID_CARD)
+		p += sprintf(p, "card:%d ", mem_err->card);
+	if (mem_err->validation_bits & CPER_MEM_VALID_MODULE)
+		p += sprintf(p, "module:%d ", mem_err->module);
+	if (mem_err->validation_bits & CPER_MEM_VALID_RANK_NUMBER)
+		p += sprintf(p, "rank:%d ", mem_err->rank);
+	if (mem_err->validation_bits & CPER_MEM_VALID_BANK)
+		p += sprintf(p, "bank:%d ", mem_err->bank);
+	if (mem_err->validation_bits & CPER_MEM_VALID_ROW)
+		p += sprintf(p, "row:%d ", mem_err->row);
+	if (mem_err->validation_bits & CPER_MEM_VALID_COLUMN)
+		p += sprintf(p, "col:%d ", mem_err->column);
+	if (mem_err->validation_bits & CPER_MEM_VALID_BIT_POSITION)
+		p += sprintf(p, "bit_pos:%d ", mem_err->bit_pos);
+	if (mem_err->validation_bits & CPER_MEM_VALID_MODULE_HANDLE) {
+		const char *bank = NULL, *device = NULL;
+		dmi_memdev_name(mem_err->mem_dev_handle, &bank, &device);
+		if (bank != NULL && device != NULL)
+			p += sprintf(p, "DIMM location:%s %s ", bank, device);
+		else
+			p += sprintf(p, "DIMM DMI handle: 0x%.4x ",
+				     mem_err->mem_dev_handle);
+	}
+	if (p > e->location)
+		*(p - 1) = '\0';
+
+	/* All other fields are mapped on e->other_detail */
+	p = pvt->other_detail;
+	if (mem_err->validation_bits & CPER_MEM_VALID_ERROR_STATUS) {
+		u64 status = mem_err->error_status;
+
+		p += sprintf(p, "status(0x%016llx): ", (long long)status);
+		switch ((status >> 8) & 0xff) {
+		case 1:
+			p += sprintf(p, "Error detected internal to the component ");
+			break;
+		case 16:
+			p += sprintf(p, "Error detected in the bus ");
+			break;
+		case 4:
+			p += sprintf(p, "Storage error in DRAM memory ");
+			break;
+		case 5:
+			p += sprintf(p, "Storage error in TLB ");
+			break;
+		case 6:
+			p += sprintf(p, "Storage error in cache ");
+			break;
+		case 7:
+			p += sprintf(p, "Error in one or more functional units ");
+			break;
+		case 8:
+			p += sprintf(p, "component failed self test ");
+			break;
+		case 9:
+			p += sprintf(p, "Overflow or undervalue of internal queue ");
+			break;
+		case 17:
+			p += sprintf(p, "Virtual address not found on IO-TLB or IO-PDIR ");
+			break;
+		case 18:
+			p += sprintf(p, "Improper access error ");
+			break;
+		case 19:
+			p += sprintf(p, "Access to a memory address which is not mapped to any component ");
+			break;
+		case 20:
+			p += sprintf(p, "Loss of Lockstep ");
+			break;
+		case 21:
+			p += sprintf(p, "Response not associated with a request ");
+			break;
+		case 22:
+			p += sprintf(p, "Bus parity error - must also set the A, C, or D Bits ");
+			break;
+		case 23:
+			p += sprintf(p, "Detection of a PATH_ERROR ");
+			break;
+		case 25:
+			p += sprintf(p, "Bus operation timeout ");
+			break;
+		case 26:
+			p += sprintf(p, "A read was issued to data that has been poisoned ");
+			break;
+		default:
+			p += sprintf(p, "reserved ");
+			break;
+		}
+	}
+	if (mem_err->validation_bits & CPER_MEM_VALID_REQUESTOR_ID)
+		p += sprintf(p, "requestorID: 0x%016llx ",
+			     (long long)mem_err->requestor_id);
+	if (mem_err->validation_bits & CPER_MEM_VALID_RESPONDER_ID)
+		p += sprintf(p, "responderID: 0x%016llx ",
+			     (long long)mem_err->responder_id);
+	if (mem_err->validation_bits & CPER_MEM_VALID_TARGET_ID)
+		p += sprintf(p, "targetID: 0x%016llx ",
+			     (long long)mem_err->responder_id);
+	if (p > pvt->other_detail)
+		*(p - 1) = '\0';
+
+	/* Sanity-check driver-supplied grain value. */
+	if (WARN_ON_ONCE(!e->grain))
+		e->grain = 1;
+
+	grain_bits = fls_long(e->grain - 1);
+
+	/* Generate the trace event */
+	snprintf(pvt->detail_location, sizeof(pvt->detail_location),
+		 "APEI location: %s %s", e->location, e->other_detail);
+	trace_mc_event(type, e->msg, e->label, e->error_count,
+		       mci->mc_idx, e->top_layer, e->mid_layer, e->low_layer,
+		       (e->page_frame_number << PAGE_SHIFT) | e->offset_in_page,
+		       grain_bits, e->syndrome, pvt->detail_location);
+
+	edac_raw_mc_handle_error(type, mci, e);
+	spin_unlock_irqrestore(&ghes_lock, flags);
+}
+
+/*
+ * Known systems that are safe to enable this module.
+ */
+static struct acpi_platform_list plat_list[] = {
+	{"HPE   ", "Server  ", 0, ACPI_SIG_FADT, all_versions},
+	{ } /* End */
+};
+
+int ghes_edac_register(struct ghes *ghes, struct device *dev)
+{
+	bool fake = false;
+	int rc, num_dimm = 0;
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[1];
+	struct ghes_edac_dimm_fill dimm_fill;
+	int idx = -1;
+
+	if (IS_ENABLED(CONFIG_X86)) {
+		/* Check if safe to enable on this system */
+		idx = acpi_match_platform_list(plat_list);
+		if (!force_load && idx < 0)
+			return -ENODEV;
+	} else {
+		idx = 0;
+	}
+
+	/*
+	 * We have only one logical memory controller to which all DIMMs belong.
+	 */
+	if (atomic_inc_return(&ghes_init) > 1)
+		return 0;
+
+	/* Get the number of DIMMs */
+	dmi_walk(ghes_edac_count_dimms, &num_dimm);
+
+	/* Check if we've got a bogus BIOS */
+	if (num_dimm == 0) {
+		fake = true;
+		num_dimm = 1;
+	}
+
+	layers[0].type = EDAC_MC_LAYER_ALL_MEM;
+	layers[0].size = num_dimm;
+	layers[0].is_virt_csrow = true;
+
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(struct ghes_edac_pvt));
+	if (!mci) {
+		pr_info("Can't allocate memory for EDAC data\n");
+		return -ENOMEM;
+	}
+
+	ghes_pvt	= mci->pvt_info;
+	ghes_pvt->ghes	= ghes;
+	ghes_pvt->mci	= mci;
+
+	mci->pdev = dev;
+	mci->mtype_cap = MEM_FLAG_EMPTY;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE;
+	mci->edac_cap = EDAC_FLAG_NONE;
+	mci->mod_name = "ghes_edac.c";
+	mci->ctl_name = "ghes_edac";
+	mci->dev_name = "ghes";
+
+	if (fake) {
+		pr_info("This system has a very crappy BIOS: It doesn't even list the DIMMS.\n");
+		pr_info("Its SMBIOS info is wrong. It is doubtful that the error report would\n");
+		pr_info("work on such system. Use this driver with caution\n");
+	} else if (idx < 0) {
+		pr_info("This EDAC driver relies on BIOS to enumerate memory and get error reports.\n");
+		pr_info("Unfortunately, not all BIOSes reflect the memory layout correctly.\n");
+		pr_info("So, the end result of using this driver varies from vendor to vendor.\n");
+		pr_info("If you find incorrect reports, please contact your hardware vendor\n");
+		pr_info("to correct its BIOS.\n");
+		pr_info("This system has %d DIMM sockets.\n", num_dimm);
+	}
+
+	if (!fake) {
+		dimm_fill.count = 0;
+		dimm_fill.mci = mci;
+		dmi_walk(ghes_edac_dmidecode, &dimm_fill);
+	} else {
+		struct dimm_info *dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
+						       mci->n_layers, 0, 0, 0);
+
+		dimm->nr_pages = 1;
+		dimm->grain = 128;
+		dimm->mtype = MEM_UNKNOWN;
+		dimm->dtype = DEV_UNKNOWN;
+		dimm->edac_mode = EDAC_SECDED;
+	}
+
+	rc = edac_mc_add_mc(mci);
+	if (rc < 0) {
+		pr_info("Can't register at EDAC core\n");
+		edac_mc_free(mci);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+void ghes_edac_unregister(struct ghes *ghes)
+{
+	struct mem_ctl_info *mci;
+
+	if (!ghes_pvt)
+		return;
+
+	if (atomic_dec_return(&ghes_init))
+		return;
+
+	mci = ghes_pvt->mci;
+	ghes_pvt = NULL;
+	edac_mc_del_mc(mci->pdev);
+	edac_mc_free(mci);
+}
diff --git a/drivers/edac/highbank_l2_edac.c b/drivers/edac/highbank_l2_edac.c
new file mode 100644
index 000000000..cd9a2bb7c
--- /dev/null
+++ b/drivers/edac/highbank_l2_edac.c
@@ -0,0 +1,153 @@
+/*
+ * Copyright 2011-2012 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/edac.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+
+#include "edac_module.h"
+
+#define SR_CLR_SB_ECC_INTR	0x0
+#define SR_CLR_DB_ECC_INTR	0x4
+
+struct hb_l2_drvdata {
+	void __iomem *base;
+	int sb_irq;
+	int db_irq;
+};
+
+static irqreturn_t highbank_l2_err_handler(int irq, void *dev_id)
+{
+	struct edac_device_ctl_info *dci = dev_id;
+	struct hb_l2_drvdata *drvdata = dci->pvt_info;
+
+	if (irq == drvdata->sb_irq) {
+		writel(1, drvdata->base + SR_CLR_SB_ECC_INTR);
+		edac_device_handle_ce(dci, 0, 0, dci->ctl_name);
+	}
+	if (irq == drvdata->db_irq) {
+		writel(1, drvdata->base + SR_CLR_DB_ECC_INTR);
+		edac_device_handle_ue(dci, 0, 0, dci->ctl_name);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static const struct of_device_id hb_l2_err_of_match[] = {
+	{ .compatible = "calxeda,hb-sregs-l2-ecc", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, hb_l2_err_of_match);
+
+static int highbank_l2_err_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *id;
+	struct edac_device_ctl_info *dci;
+	struct hb_l2_drvdata *drvdata;
+	struct resource *r;
+	int res = 0;
+
+	dci = edac_device_alloc_ctl_info(sizeof(*drvdata), "cpu",
+		1, "L", 1, 2, NULL, 0, 0);
+	if (!dci)
+		return -ENOMEM;
+
+	drvdata = dci->pvt_info;
+	dci->dev = &pdev->dev;
+	platform_set_drvdata(pdev, dci);
+
+	if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL))
+		return -ENOMEM;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		dev_err(&pdev->dev, "Unable to get mem resource\n");
+		res = -ENODEV;
+		goto err;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev, r->start,
+				     resource_size(r), dev_name(&pdev->dev))) {
+		dev_err(&pdev->dev, "Error while requesting mem region\n");
+		res = -EBUSY;
+		goto err;
+	}
+
+	drvdata->base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+	if (!drvdata->base) {
+		dev_err(&pdev->dev, "Unable to map regs\n");
+		res = -ENOMEM;
+		goto err;
+	}
+
+	id = of_match_device(hb_l2_err_of_match, &pdev->dev);
+	dci->mod_name = pdev->dev.driver->name;
+	dci->ctl_name = id ? id->compatible : "unknown";
+	dci->dev_name = dev_name(&pdev->dev);
+
+	if (edac_device_add_device(dci))
+		goto err;
+
+	drvdata->db_irq = platform_get_irq(pdev, 0);
+	res = devm_request_irq(&pdev->dev, drvdata->db_irq,
+			       highbank_l2_err_handler,
+			       0, dev_name(&pdev->dev), dci);
+	if (res < 0)
+		goto err2;
+
+	drvdata->sb_irq = platform_get_irq(pdev, 1);
+	res = devm_request_irq(&pdev->dev, drvdata->sb_irq,
+			       highbank_l2_err_handler,
+			       0, dev_name(&pdev->dev), dci);
+	if (res < 0)
+		goto err2;
+
+	devres_close_group(&pdev->dev, NULL);
+	return 0;
+err2:
+	edac_device_del_device(&pdev->dev);
+err:
+	devres_release_group(&pdev->dev, NULL);
+	edac_device_free_ctl_info(dci);
+	return res;
+}
+
+static int highbank_l2_err_remove(struct platform_device *pdev)
+{
+	struct edac_device_ctl_info *dci = platform_get_drvdata(pdev);
+
+	edac_device_del_device(&pdev->dev);
+	edac_device_free_ctl_info(dci);
+	return 0;
+}
+
+static struct platform_driver highbank_l2_edac_driver = {
+	.probe = highbank_l2_err_probe,
+	.remove = highbank_l2_err_remove,
+	.driver = {
+		.name = "hb_l2_edac",
+		.of_match_table = hb_l2_err_of_match,
+	},
+};
+
+module_platform_driver(highbank_l2_edac_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Calxeda, Inc.");
+MODULE_DESCRIPTION("EDAC Driver for Calxeda Highbank L2 Cache");
diff --git a/drivers/edac/highbank_mc_edac.c b/drivers/edac/highbank_mc_edac.c
new file mode 100644
index 000000000..6092e61be
--- /dev/null
+++ b/drivers/edac/highbank_mc_edac.c
@@ -0,0 +1,283 @@
+/*
+ * Copyright 2011-2012 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/edac.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/uaccess.h>
+
+#include "edac_module.h"
+
+/* DDR Ctrlr Error Registers */
+
+#define HB_DDR_ECC_ERR_BASE		0x128
+#define MW_DDR_ECC_ERR_BASE		0x1b4
+
+#define HB_DDR_ECC_OPT			0x00
+#define HB_DDR_ECC_U_ERR_ADDR		0x08
+#define HB_DDR_ECC_U_ERR_STAT		0x0c
+#define HB_DDR_ECC_U_ERR_DATAL		0x10
+#define HB_DDR_ECC_U_ERR_DATAH		0x14
+#define HB_DDR_ECC_C_ERR_ADDR		0x18
+#define HB_DDR_ECC_C_ERR_STAT		0x1c
+#define HB_DDR_ECC_C_ERR_DATAL		0x20
+#define HB_DDR_ECC_C_ERR_DATAH		0x24
+
+#define HB_DDR_ECC_OPT_MODE_MASK	0x3
+#define HB_DDR_ECC_OPT_FWC		0x100
+#define HB_DDR_ECC_OPT_XOR_SHIFT	16
+
+/* DDR Ctrlr Interrupt Registers */
+
+#define HB_DDR_ECC_INT_BASE		0x180
+#define MW_DDR_ECC_INT_BASE		0x218
+
+#define HB_DDR_ECC_INT_STATUS		0x00
+#define HB_DDR_ECC_INT_ACK		0x04
+
+#define HB_DDR_ECC_INT_STAT_CE		0x8
+#define HB_DDR_ECC_INT_STAT_DOUBLE_CE	0x10
+#define HB_DDR_ECC_INT_STAT_UE		0x20
+#define HB_DDR_ECC_INT_STAT_DOUBLE_UE	0x40
+
+struct hb_mc_drvdata {
+	void __iomem *mc_err_base;
+	void __iomem *mc_int_base;
+};
+
+static irqreturn_t highbank_mc_err_handler(int irq, void *dev_id)
+{
+	struct mem_ctl_info *mci = dev_id;
+	struct hb_mc_drvdata *drvdata = mci->pvt_info;
+	u32 status, err_addr;
+
+	/* Read the interrupt status register */
+	status = readl(drvdata->mc_int_base + HB_DDR_ECC_INT_STATUS);
+
+	if (status & HB_DDR_ECC_INT_STAT_UE) {
+		err_addr = readl(drvdata->mc_err_base + HB_DDR_ECC_U_ERR_ADDR);
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+				     err_addr >> PAGE_SHIFT,
+				     err_addr & ~PAGE_MASK, 0,
+				     0, 0, -1,
+				     mci->ctl_name, "");
+	}
+	if (status & HB_DDR_ECC_INT_STAT_CE) {
+		u32 syndrome = readl(drvdata->mc_err_base + HB_DDR_ECC_C_ERR_STAT);
+		syndrome = (syndrome >> 8) & 0xff;
+		err_addr = readl(drvdata->mc_err_base + HB_DDR_ECC_C_ERR_ADDR);
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+				     err_addr >> PAGE_SHIFT,
+				     err_addr & ~PAGE_MASK, syndrome,
+				     0, 0, -1,
+				     mci->ctl_name, "");
+	}
+
+	/* clear the error, clears the interrupt */
+	writel(status, drvdata->mc_int_base + HB_DDR_ECC_INT_ACK);
+	return IRQ_HANDLED;
+}
+
+static void highbank_mc_err_inject(struct mem_ctl_info *mci, u8 synd)
+{
+	struct hb_mc_drvdata *pdata = mci->pvt_info;
+	u32 reg;
+
+	reg = readl(pdata->mc_err_base + HB_DDR_ECC_OPT);
+	reg &= HB_DDR_ECC_OPT_MODE_MASK;
+	reg |= (synd << HB_DDR_ECC_OPT_XOR_SHIFT) | HB_DDR_ECC_OPT_FWC;
+	writel(reg, pdata->mc_err_base + HB_DDR_ECC_OPT);
+}
+
+#define to_mci(k) container_of(k, struct mem_ctl_info, dev)
+
+static ssize_t highbank_mc_inject_ctrl(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	u8 synd;
+
+	if (kstrtou8(buf, 16, &synd))
+		return -EINVAL;
+
+	highbank_mc_err_inject(mci, synd);
+
+	return count;
+}
+
+static DEVICE_ATTR(inject_ctrl, S_IWUSR, NULL, highbank_mc_inject_ctrl);
+
+static struct attribute *highbank_dev_attrs[] = {
+	&dev_attr_inject_ctrl.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(highbank_dev);
+
+struct hb_mc_settings {
+	int	err_offset;
+	int	int_offset;
+};
+
+static struct hb_mc_settings hb_settings = {
+	.err_offset = HB_DDR_ECC_ERR_BASE,
+	.int_offset = HB_DDR_ECC_INT_BASE,
+};
+
+static struct hb_mc_settings mw_settings = {
+	.err_offset = MW_DDR_ECC_ERR_BASE,
+	.int_offset = MW_DDR_ECC_INT_BASE,
+};
+
+static const struct of_device_id hb_ddr_ctrl_of_match[] = {
+	{ .compatible = "calxeda,hb-ddr-ctrl",		.data = &hb_settings },
+	{ .compatible = "calxeda,ecx-2000-ddr-ctrl",	.data = &mw_settings },
+	{},
+};
+MODULE_DEVICE_TABLE(of, hb_ddr_ctrl_of_match);
+
+static int highbank_mc_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *id;
+	const struct hb_mc_settings *settings;
+	struct edac_mc_layer layers[2];
+	struct mem_ctl_info *mci;
+	struct hb_mc_drvdata *drvdata;
+	struct dimm_info *dimm;
+	struct resource *r;
+	void __iomem *base;
+	u32 control;
+	int irq;
+	int res = 0;
+
+	id = of_match_device(hb_ddr_ctrl_of_match, &pdev->dev);
+	if (!id)
+		return -ENODEV;
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = 1;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = 1;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
+			    sizeof(struct hb_mc_drvdata));
+	if (!mci)
+		return -ENOMEM;
+
+	mci->pdev = &pdev->dev;
+	drvdata = mci->pvt_info;
+	platform_set_drvdata(pdev, mci);
+
+	if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL))
+		return -ENOMEM;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		dev_err(&pdev->dev, "Unable to get mem resource\n");
+		res = -ENODEV;
+		goto err;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev, r->start,
+				     resource_size(r), dev_name(&pdev->dev))) {
+		dev_err(&pdev->dev, "Error while requesting mem region\n");
+		res = -EBUSY;
+		goto err;
+	}
+
+	base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+	if (!base) {
+		dev_err(&pdev->dev, "Unable to map regs\n");
+		res = -ENOMEM;
+		goto err;
+	}
+
+	settings = id->data;
+	drvdata->mc_err_base = base + settings->err_offset;
+	drvdata->mc_int_base = base + settings->int_offset;
+
+	control = readl(drvdata->mc_err_base + HB_DDR_ECC_OPT) & 0x3;
+	if (!control || (control == 0x2)) {
+		dev_err(&pdev->dev, "No ECC present, or ECC disabled\n");
+		res = -ENODEV;
+		goto err;
+	}
+
+	mci->mtype_cap = MEM_FLAG_DDR3;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->mod_name = pdev->dev.driver->name;
+	mci->ctl_name = id->compatible;
+	mci->dev_name = dev_name(&pdev->dev);
+	mci->scrub_mode = SCRUB_SW_SRC;
+
+	/* Only a single 4GB DIMM is supported */
+	dimm = *mci->dimms;
+	dimm->nr_pages = (~0UL >> PAGE_SHIFT) + 1;
+	dimm->grain = 8;
+	dimm->dtype = DEV_X8;
+	dimm->mtype = MEM_DDR3;
+	dimm->edac_mode = EDAC_SECDED;
+
+	res = edac_mc_add_mc_with_groups(mci, highbank_dev_groups);
+	if (res < 0)
+		goto err;
+
+	irq = platform_get_irq(pdev, 0);
+	res = devm_request_irq(&pdev->dev, irq, highbank_mc_err_handler,
+			       0, dev_name(&pdev->dev), mci);
+	if (res < 0) {
+		dev_err(&pdev->dev, "Unable to request irq %d\n", irq);
+		goto err2;
+	}
+
+	devres_close_group(&pdev->dev, NULL);
+	return 0;
+err2:
+	edac_mc_del_mc(&pdev->dev);
+err:
+	devres_release_group(&pdev->dev, NULL);
+	edac_mc_free(mci);
+	return res;
+}
+
+static int highbank_mc_remove(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+	edac_mc_del_mc(&pdev->dev);
+	edac_mc_free(mci);
+	return 0;
+}
+
+static struct platform_driver highbank_mc_edac_driver = {
+	.probe = highbank_mc_probe,
+	.remove = highbank_mc_remove,
+	.driver = {
+		.name = "hb_mc_edac",
+		.of_match_table = hb_ddr_ctrl_of_match,
+	},
+};
+
+module_platform_driver(highbank_mc_edac_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Calxeda, Inc.");
+MODULE_DESCRIPTION("EDAC Driver for Calxeda Highbank");
diff --git a/drivers/edac/i3000_edac.c b/drivers/edac/i3000_edac.c
new file mode 100644
index 000000000..8085a32ec
--- /dev/null
+++ b/drivers/edac/i3000_edac.c
@@ -0,0 +1,566 @@
+/*
+ * Intel 3000/3010 Memory Controller kernel module
+ * Copyright (C) 2007 Akamai Technologies, Inc.
+ * Shamelessly copied from:
+ * 	Intel D82875P Memory Controller kernel module
+ * 	(C) 2003 Linux Networx (http://lnxi.com)
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/edac.h>
+#include "edac_module.h"
+
+#define EDAC_MOD_STR		"i3000_edac"
+
+#define I3000_RANKS		8
+#define I3000_RANKS_PER_CHANNEL	4
+#define I3000_CHANNELS		2
+
+/* Intel 3000 register addresses - device 0 function 0 - DRAM Controller */
+
+#define I3000_MCHBAR		0x44	/* MCH Memory Mapped Register BAR */
+#define I3000_MCHBAR_MASK	0xffffc000
+#define I3000_MMR_WINDOW_SIZE	16384
+
+#define I3000_EDEAP	0x70	/* Extended DRAM Error Address Pointer (8b)
+				 *
+				 * 7:1   reserved
+				 * 0     bit 32 of address
+				 */
+#define I3000_DEAP	0x58	/* DRAM Error Address Pointer (32b)
+				 *
+				 * 31:7  address
+				 * 6:1   reserved
+				 * 0     Error channel 0/1
+				 */
+#define I3000_DEAP_GRAIN 		(1 << 7)
+
+/*
+ * Helper functions to decode the DEAP/EDEAP hardware registers.
+ *
+ * The type promotion here is deliberate; we're deriving an
+ * unsigned long pfn and offset from hardware regs which are u8/u32.
+ */
+
+static inline unsigned long deap_pfn(u8 edeap, u32 deap)
+{
+	deap >>= PAGE_SHIFT;
+	deap |= (edeap & 1) << (32 - PAGE_SHIFT);
+	return deap;
+}
+
+static inline unsigned long deap_offset(u32 deap)
+{
+	return deap & ~(I3000_DEAP_GRAIN - 1) & ~PAGE_MASK;
+}
+
+static inline int deap_channel(u32 deap)
+{
+	return deap & 1;
+}
+
+#define I3000_DERRSYN	0x5c	/* DRAM Error Syndrome (8b)
+				 *
+				 *  7:0  DRAM ECC Syndrome
+				 */
+
+#define I3000_ERRSTS	0xc8	/* Error Status Register (16b)
+				 *
+				 * 15:12 reserved
+				 * 11    MCH Thermal Sensor Event
+				 *         for SMI/SCI/SERR
+				 * 10    reserved
+				 *  9    LOCK to non-DRAM Memory Flag (LCKF)
+				 *  8    Received Refresh Timeout Flag (RRTOF)
+				 *  7:2  reserved
+				 *  1    Multi-bit DRAM ECC Error Flag (DMERR)
+				 *  0    Single-bit DRAM ECC Error Flag (DSERR)
+				 */
+#define I3000_ERRSTS_BITS	0x0b03	/* bits which indicate errors */
+#define I3000_ERRSTS_UE		0x0002
+#define I3000_ERRSTS_CE		0x0001
+
+#define I3000_ERRCMD	0xca	/* Error Command (16b)
+				 *
+				 * 15:12 reserved
+				 * 11    SERR on MCH Thermal Sensor Event
+				 *         (TSESERR)
+				 * 10    reserved
+				 *  9    SERR on LOCK to non-DRAM Memory
+				 *         (LCKERR)
+				 *  8    SERR on DRAM Refresh Timeout
+				 *         (DRTOERR)
+				 *  7:2  reserved
+				 *  1    SERR Multi-Bit DRAM ECC Error
+				 *         (DMERR)
+				 *  0    SERR on Single-Bit ECC Error
+				 *         (DSERR)
+				 */
+
+/* Intel  MMIO register space - device 0 function 0 - MMR space */
+
+#define I3000_DRB_SHIFT 25	/* 32MiB grain */
+
+#define I3000_C0DRB	0x100	/* Channel 0 DRAM Rank Boundary (8b x 4)
+				 *
+				 * 7:0   Channel 0 DRAM Rank Boundary Address
+				 */
+#define I3000_C1DRB	0x180	/* Channel 1 DRAM Rank Boundary (8b x 4)
+				 *
+				 * 7:0   Channel 1 DRAM Rank Boundary Address
+				 */
+
+#define I3000_C0DRA	0x108	/* Channel 0 DRAM Rank Attribute (8b x 2)
+				 *
+				 * 7     reserved
+				 * 6:4   DRAM odd Rank Attribute
+				 * 3     reserved
+				 * 2:0   DRAM even Rank Attribute
+				 *
+				 * Each attribute defines the page
+				 * size of the corresponding rank:
+				 *     000: unpopulated
+				 *     001: reserved
+				 *     010: 4 KB
+				 *     011: 8 KB
+				 *     100: 16 KB
+				 *     Others: reserved
+				 */
+#define I3000_C1DRA	0x188	/* Channel 1 DRAM Rank Attribute (8b x 2) */
+
+static inline unsigned char odd_rank_attrib(unsigned char dra)
+{
+	return (dra & 0x70) >> 4;
+}
+
+static inline unsigned char even_rank_attrib(unsigned char dra)
+{
+	return dra & 0x07;
+}
+
+#define I3000_C0DRC0	0x120	/* DRAM Controller Mode 0 (32b)
+				 *
+				 * 31:30 reserved
+				 * 29    Initialization Complete (IC)
+				 * 28:11 reserved
+				 * 10:8  Refresh Mode Select (RMS)
+				 * 7     reserved
+				 * 6:4   Mode Select (SMS)
+				 * 3:2   reserved
+				 * 1:0   DRAM Type (DT)
+				 */
+
+#define I3000_C0DRC1	0x124	/* DRAM Controller Mode 1 (32b)
+				 *
+				 * 31    Enhanced Addressing Enable (ENHADE)
+				 * 30:0  reserved
+				 */
+
+enum i3000p_chips {
+	I3000 = 0,
+};
+
+struct i3000_dev_info {
+	const char *ctl_name;
+};
+
+struct i3000_error_info {
+	u16 errsts;
+	u8 derrsyn;
+	u8 edeap;
+	u32 deap;
+	u16 errsts2;
+};
+
+static const struct i3000_dev_info i3000_devs[] = {
+	[I3000] = {
+		.ctl_name = "i3000"},
+};
+
+static struct pci_dev *mci_pdev;
+static int i3000_registered = 1;
+static struct edac_pci_ctl_info *i3000_pci;
+
+static void i3000_get_error_info(struct mem_ctl_info *mci,
+				 struct i3000_error_info *info)
+{
+	struct pci_dev *pdev;
+
+	pdev = to_pci_dev(mci->pdev);
+
+	/*
+	 * This is a mess because there is no atomic way to read all the
+	 * registers at once and the registers can transition from CE being
+	 * overwritten by UE.
+	 */
+	pci_read_config_word(pdev, I3000_ERRSTS, &info->errsts);
+	if (!(info->errsts & I3000_ERRSTS_BITS))
+		return;
+	pci_read_config_byte(pdev, I3000_EDEAP, &info->edeap);
+	pci_read_config_dword(pdev, I3000_DEAP, &info->deap);
+	pci_read_config_byte(pdev, I3000_DERRSYN, &info->derrsyn);
+	pci_read_config_word(pdev, I3000_ERRSTS, &info->errsts2);
+
+	/*
+	 * If the error is the same for both reads then the first set
+	 * of reads is valid.  If there is a change then there is a CE
+	 * with no info and the second set of reads is valid and
+	 * should be UE info.
+	 */
+	if ((info->errsts ^ info->errsts2) & I3000_ERRSTS_BITS) {
+		pci_read_config_byte(pdev, I3000_EDEAP, &info->edeap);
+		pci_read_config_dword(pdev, I3000_DEAP, &info->deap);
+		pci_read_config_byte(pdev, I3000_DERRSYN, &info->derrsyn);
+	}
+
+	/*
+	 * Clear any error bits.
+	 * (Yes, we really clear bits by writing 1 to them.)
+	 */
+	pci_write_bits16(pdev, I3000_ERRSTS, I3000_ERRSTS_BITS,
+			 I3000_ERRSTS_BITS);
+}
+
+static int i3000_process_error_info(struct mem_ctl_info *mci,
+				struct i3000_error_info *info,
+				int handle_errors)
+{
+	int row, multi_chan, channel;
+	unsigned long pfn, offset;
+
+	multi_chan = mci->csrows[0]->nr_channels - 1;
+
+	if (!(info->errsts & I3000_ERRSTS_BITS))
+		return 0;
+
+	if (!handle_errors)
+		return 1;
+
+	if ((info->errsts ^ info->errsts2) & I3000_ERRSTS_BITS) {
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
+				     -1, -1, -1,
+				     "UE overwrote CE", "");
+		info->errsts = info->errsts2;
+	}
+
+	pfn = deap_pfn(info->edeap, info->deap);
+	offset = deap_offset(info->deap);
+	channel = deap_channel(info->deap);
+
+	row = edac_mc_find_csrow_by_page(mci, pfn);
+
+	if (info->errsts & I3000_ERRSTS_UE)
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+				     pfn, offset, 0,
+				     row, -1, -1,
+				     "i3000 UE", "");
+	else
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+				     pfn, offset, info->derrsyn,
+				     row, multi_chan ? channel : 0, -1,
+				     "i3000 CE", "");
+
+	return 1;
+}
+
+static void i3000_check(struct mem_ctl_info *mci)
+{
+	struct i3000_error_info info;
+
+	edac_dbg(1, "MC%d\n", mci->mc_idx);
+	i3000_get_error_info(mci, &info);
+	i3000_process_error_info(mci, &info, 1);
+}
+
+static int i3000_is_interleaved(const unsigned char *c0dra,
+				const unsigned char *c1dra,
+				const unsigned char *c0drb,
+				const unsigned char *c1drb)
+{
+	int i;
+
+	/*
+	 * If the channels aren't populated identically then
+	 * we're not interleaved.
+	 */
+	for (i = 0; i < I3000_RANKS_PER_CHANNEL / 2; i++)
+		if (odd_rank_attrib(c0dra[i]) != odd_rank_attrib(c1dra[i]) ||
+			even_rank_attrib(c0dra[i]) !=
+						even_rank_attrib(c1dra[i]))
+			return 0;
+
+	/*
+	 * If the rank boundaries for the two channels are different
+	 * then we're not interleaved.
+	 */
+	for (i = 0; i < I3000_RANKS_PER_CHANNEL; i++)
+		if (c0drb[i] != c1drb[i])
+			return 0;
+
+	return 1;
+}
+
+static int i3000_probe1(struct pci_dev *pdev, int dev_idx)
+{
+	int rc;
+	int i, j;
+	struct mem_ctl_info *mci = NULL;
+	struct edac_mc_layer layers[2];
+	unsigned long last_cumul_size, nr_pages;
+	int interleaved, nr_channels;
+	unsigned char dra[I3000_RANKS / 2], drb[I3000_RANKS];
+	unsigned char *c0dra = dra, *c1dra = &dra[I3000_RANKS_PER_CHANNEL / 2];
+	unsigned char *c0drb = drb, *c1drb = &drb[I3000_RANKS_PER_CHANNEL];
+	unsigned long mchbar;
+	void __iomem *window;
+
+	edac_dbg(0, "MC:\n");
+
+	pci_read_config_dword(pdev, I3000_MCHBAR, (u32 *) & mchbar);
+	mchbar &= I3000_MCHBAR_MASK;
+	window = ioremap_nocache(mchbar, I3000_MMR_WINDOW_SIZE);
+	if (!window) {
+		printk(KERN_ERR "i3000: cannot map mmio space at 0x%lx\n",
+			mchbar);
+		return -ENODEV;
+	}
+
+	c0dra[0] = readb(window + I3000_C0DRA + 0);	/* ranks 0,1 */
+	c0dra[1] = readb(window + I3000_C0DRA + 1);	/* ranks 2,3 */
+	c1dra[0] = readb(window + I3000_C1DRA + 0);	/* ranks 0,1 */
+	c1dra[1] = readb(window + I3000_C1DRA + 1);	/* ranks 2,3 */
+
+	for (i = 0; i < I3000_RANKS_PER_CHANNEL; i++) {
+		c0drb[i] = readb(window + I3000_C0DRB + i);
+		c1drb[i] = readb(window + I3000_C1DRB + i);
+	}
+
+	iounmap(window);
+
+	/*
+	 * Figure out how many channels we have.
+	 *
+	 * If we have what the datasheet calls "asymmetric channels"
+	 * (essentially the same as what was called "virtual single
+	 * channel mode" in the i82875) then it's a single channel as
+	 * far as EDAC is concerned.
+	 */
+	interleaved = i3000_is_interleaved(c0dra, c1dra, c0drb, c1drb);
+	nr_channels = interleaved ? 2 : 1;
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = I3000_RANKS / nr_channels;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = nr_channels;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0);
+	if (!mci)
+		return -ENOMEM;
+
+	edac_dbg(3, "MC: init mci\n");
+
+	mci->pdev = &pdev->dev;
+	mci->mtype_cap = MEM_FLAG_DDR2;
+
+	mci->edac_ctl_cap = EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+
+	mci->mod_name = EDAC_MOD_STR;
+	mci->ctl_name = i3000_devs[dev_idx].ctl_name;
+	mci->dev_name = pci_name(pdev);
+	mci->edac_check = i3000_check;
+	mci->ctl_page_to_phys = NULL;
+
+	/*
+	 * The dram rank boundary (DRB) reg values are boundary addresses
+	 * for each DRAM rank with a granularity of 32MB.  DRB regs are
+	 * cumulative; the last one will contain the total memory
+	 * contained in all ranks.
+	 *
+	 * If we're in interleaved mode then we're only walking through
+	 * the ranks of controller 0, so we double all the values we see.
+	 */
+	for (last_cumul_size = i = 0; i < mci->nr_csrows; i++) {
+		u8 value;
+		u32 cumul_size;
+		struct csrow_info *csrow = mci->csrows[i];
+
+		value = drb[i];
+		cumul_size = value << (I3000_DRB_SHIFT - PAGE_SHIFT);
+		if (interleaved)
+			cumul_size <<= 1;
+		edac_dbg(3, "MC: (%d) cumul_size 0x%x\n", i, cumul_size);
+		if (cumul_size == last_cumul_size)
+			continue;
+
+		csrow->first_page = last_cumul_size;
+		csrow->last_page = cumul_size - 1;
+		nr_pages = cumul_size - last_cumul_size;
+		last_cumul_size = cumul_size;
+
+		for (j = 0; j < nr_channels; j++) {
+			struct dimm_info *dimm = csrow->channels[j]->dimm;
+
+			dimm->nr_pages = nr_pages / nr_channels;
+			dimm->grain = I3000_DEAP_GRAIN;
+			dimm->mtype = MEM_DDR2;
+			dimm->dtype = DEV_UNKNOWN;
+			dimm->edac_mode = EDAC_UNKNOWN;
+		}
+	}
+
+	/*
+	 * Clear any error bits.
+	 * (Yes, we really clear bits by writing 1 to them.)
+	 */
+	pci_write_bits16(pdev, I3000_ERRSTS, I3000_ERRSTS_BITS,
+			 I3000_ERRSTS_BITS);
+
+	rc = -ENODEV;
+	if (edac_mc_add_mc(mci)) {
+		edac_dbg(3, "MC: failed edac_mc_add_mc()\n");
+		goto fail;
+	}
+
+	/* allocating generic PCI control info */
+	i3000_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
+	if (!i3000_pci) {
+		printk(KERN_WARNING
+			"%s(): Unable to create PCI control\n",
+			__func__);
+		printk(KERN_WARNING
+			"%s(): PCI error report via EDAC not setup\n",
+			__func__);
+	}
+
+	/* get this far and it's successful */
+	edac_dbg(3, "MC: success\n");
+	return 0;
+
+fail:
+	if (mci)
+		edac_mc_free(mci);
+
+	return rc;
+}
+
+/* returns count (>= 0), or negative on error */
+static int i3000_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	int rc;
+
+	edac_dbg(0, "MC:\n");
+
+	if (pci_enable_device(pdev) < 0)
+		return -EIO;
+
+	rc = i3000_probe1(pdev, ent->driver_data);
+	if (!mci_pdev)
+		mci_pdev = pci_dev_get(pdev);
+
+	return rc;
+}
+
+static void i3000_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+
+	edac_dbg(0, "\n");
+
+	if (i3000_pci)
+		edac_pci_release_generic_ctl(i3000_pci);
+
+	mci = edac_mc_del_mc(&pdev->dev);
+	if (!mci)
+		return;
+
+	edac_mc_free(mci);
+}
+
+static const struct pci_device_id i3000_pci_tbl[] = {
+	{
+	 PCI_VEND_DEV(INTEL, 3000_HB), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	 I3000},
+	{
+	 0,
+	 }			/* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, i3000_pci_tbl);
+
+static struct pci_driver i3000_driver = {
+	.name = EDAC_MOD_STR,
+	.probe = i3000_init_one,
+	.remove = i3000_remove_one,
+	.id_table = i3000_pci_tbl,
+};
+
+static int __init i3000_init(void)
+{
+	int pci_rc;
+
+	edac_dbg(3, "MC:\n");
+
+       /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+       opstate_init();
+
+	pci_rc = pci_register_driver(&i3000_driver);
+	if (pci_rc < 0)
+		goto fail0;
+
+	if (!mci_pdev) {
+		i3000_registered = 0;
+		mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+					PCI_DEVICE_ID_INTEL_3000_HB, NULL);
+		if (!mci_pdev) {
+			edac_dbg(0, "i3000 pci_get_device fail\n");
+			pci_rc = -ENODEV;
+			goto fail1;
+		}
+
+		pci_rc = i3000_init_one(mci_pdev, i3000_pci_tbl);
+		if (pci_rc < 0) {
+			edac_dbg(0, "i3000 init fail\n");
+			pci_rc = -ENODEV;
+			goto fail1;
+		}
+	}
+
+	return 0;
+
+fail1:
+	pci_unregister_driver(&i3000_driver);
+
+fail0:
+	pci_dev_put(mci_pdev);
+
+	return pci_rc;
+}
+
+static void __exit i3000_exit(void)
+{
+	edac_dbg(3, "MC:\n");
+
+	pci_unregister_driver(&i3000_driver);
+	if (!i3000_registered) {
+		i3000_remove_one(mci_pdev);
+		pci_dev_put(mci_pdev);
+	}
+}
+
+module_init(i3000_init);
+module_exit(i3000_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Akamai Technologies Arthur Ulfeldt/Jason Uhlenkott");
+MODULE_DESCRIPTION("MC support for Intel 3000 memory hub controllers");
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/edac/i3200_edac.c b/drivers/edac/i3200_edac.c
new file mode 100644
index 000000000..299b44164
--- /dev/null
+++ b/drivers/edac/i3200_edac.c
@@ -0,0 +1,547 @@
+/*
+ * Intel 3200/3210 Memory Controller kernel module
+ * Copyright (C) 2008-2009 Akamai Technologies, Inc.
+ * Portions by Hitoshi Mitake <h.mitake@gmail.com>.
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/edac.h>
+#include <linux/io.h>
+#include "edac_module.h"
+
+#include <linux/io-64-nonatomic-lo-hi.h>
+
+#define EDAC_MOD_STR        "i3200_edac"
+
+#define PCI_DEVICE_ID_INTEL_3200_HB    0x29f0
+
+#define I3200_DIMMS		4
+#define I3200_RANKS		8
+#define I3200_RANKS_PER_CHANNEL	4
+#define I3200_CHANNELS		2
+
+/* Intel 3200 register addresses - device 0 function 0 - DRAM Controller */
+
+#define I3200_MCHBAR_LOW	0x48	/* MCH Memory Mapped Register BAR */
+#define I3200_MCHBAR_HIGH	0x4c
+#define I3200_MCHBAR_MASK	0xfffffc000ULL	/* bits 35:14 */
+#define I3200_MMR_WINDOW_SIZE	16384
+
+#define I3200_TOM		0xa0	/* Top of Memory (16b)
+		 *
+		 * 15:10 reserved
+		 *  9:0  total populated physical memory
+		 */
+#define I3200_TOM_MASK		0x3ff	/* bits 9:0 */
+#define I3200_TOM_SHIFT		26	/* 64MiB grain */
+
+#define I3200_ERRSTS		0xc8	/* Error Status Register (16b)
+		 *
+		 * 15    reserved
+		 * 14    Isochronous TBWRR Run Behind FIFO Full
+		 *       (ITCV)
+		 * 13    Isochronous TBWRR Run Behind FIFO Put
+		 *       (ITSTV)
+		 * 12    reserved
+		 * 11    MCH Thermal Sensor Event
+		 *       for SMI/SCI/SERR (GTSE)
+		 * 10    reserved
+		 *  9    LOCK to non-DRAM Memory Flag (LCKF)
+		 *  8    reserved
+		 *  7    DRAM Throttle Flag (DTF)
+		 *  6:2  reserved
+		 *  1    Multi-bit DRAM ECC Error Flag (DMERR)
+		 *  0    Single-bit DRAM ECC Error Flag (DSERR)
+		 */
+#define I3200_ERRSTS_UE		0x0002
+#define I3200_ERRSTS_CE		0x0001
+#define I3200_ERRSTS_BITS	(I3200_ERRSTS_UE | I3200_ERRSTS_CE)
+
+
+/* Intel  MMIO register space - device 0 function 0 - MMR space */
+
+#define I3200_C0DRB	0x200	/* Channel 0 DRAM Rank Boundary (16b x 4)
+		 *
+		 * 15:10 reserved
+		 *  9:0  Channel 0 DRAM Rank Boundary Address
+		 */
+#define I3200_C1DRB	0x600	/* Channel 1 DRAM Rank Boundary (16b x 4) */
+#define I3200_DRB_MASK	0x3ff	/* bits 9:0 */
+#define I3200_DRB_SHIFT	26	/* 64MiB grain */
+
+#define I3200_C0ECCERRLOG	0x280	/* Channel 0 ECC Error Log (64b)
+		 *
+		 * 63:48 Error Column Address (ERRCOL)
+		 * 47:32 Error Row Address (ERRROW)
+		 * 31:29 Error Bank Address (ERRBANK)
+		 * 28:27 Error Rank Address (ERRRANK)
+		 * 26:24 reserved
+		 * 23:16 Error Syndrome (ERRSYND)
+		 * 15: 2 reserved
+		 *    1  Multiple Bit Error Status (MERRSTS)
+		 *    0  Correctable Error Status (CERRSTS)
+		 */
+#define I3200_C1ECCERRLOG		0x680	/* Chan 1 ECC Error Log (64b) */
+#define I3200_ECCERRLOG_CE		0x1
+#define I3200_ECCERRLOG_UE		0x2
+#define I3200_ECCERRLOG_RANK_BITS	0x18000000
+#define I3200_ECCERRLOG_RANK_SHIFT	27
+#define I3200_ECCERRLOG_SYNDROME_BITS	0xff0000
+#define I3200_ECCERRLOG_SYNDROME_SHIFT	16
+#define I3200_CAPID0			0xe0	/* P.95 of spec for details */
+
+struct i3200_priv {
+	void __iomem *window;
+};
+
+static int nr_channels;
+
+static int how_many_channels(struct pci_dev *pdev)
+{
+	int n_channels;
+
+	unsigned char capid0_8b; /* 8th byte of CAPID0 */
+
+	pci_read_config_byte(pdev, I3200_CAPID0 + 8, &capid0_8b);
+
+	if (capid0_8b & 0x20) { /* check DCD: Dual Channel Disable */
+		edac_dbg(0, "In single channel mode\n");
+		n_channels = 1;
+	} else {
+		edac_dbg(0, "In dual channel mode\n");
+		n_channels = 2;
+	}
+
+	if (capid0_8b & 0x10) /* check if both channels are filled */
+		edac_dbg(0, "2 DIMMS per channel disabled\n");
+	else
+		edac_dbg(0, "2 DIMMS per channel enabled\n");
+
+	return n_channels;
+}
+
+static unsigned long eccerrlog_syndrome(u64 log)
+{
+	return (log & I3200_ECCERRLOG_SYNDROME_BITS) >>
+		I3200_ECCERRLOG_SYNDROME_SHIFT;
+}
+
+static int eccerrlog_row(int channel, u64 log)
+{
+	u64 rank = ((log & I3200_ECCERRLOG_RANK_BITS) >>
+		I3200_ECCERRLOG_RANK_SHIFT);
+	return rank | (channel * I3200_RANKS_PER_CHANNEL);
+}
+
+enum i3200_chips {
+	I3200 = 0,
+};
+
+struct i3200_dev_info {
+	const char *ctl_name;
+};
+
+struct i3200_error_info {
+	u16 errsts;
+	u16 errsts2;
+	u64 eccerrlog[I3200_CHANNELS];
+};
+
+static const struct i3200_dev_info i3200_devs[] = {
+	[I3200] = {
+		.ctl_name = "i3200"
+	},
+};
+
+static struct pci_dev *mci_pdev;
+static int i3200_registered = 1;
+
+
+static void i3200_clear_error_info(struct mem_ctl_info *mci)
+{
+	struct pci_dev *pdev;
+
+	pdev = to_pci_dev(mci->pdev);
+
+	/*
+	 * Clear any error bits.
+	 * (Yes, we really clear bits by writing 1 to them.)
+	 */
+	pci_write_bits16(pdev, I3200_ERRSTS, I3200_ERRSTS_BITS,
+		I3200_ERRSTS_BITS);
+}
+
+static void i3200_get_and_clear_error_info(struct mem_ctl_info *mci,
+		struct i3200_error_info *info)
+{
+	struct pci_dev *pdev;
+	struct i3200_priv *priv = mci->pvt_info;
+	void __iomem *window = priv->window;
+
+	pdev = to_pci_dev(mci->pdev);
+
+	/*
+	 * This is a mess because there is no atomic way to read all the
+	 * registers at once and the registers can transition from CE being
+	 * overwritten by UE.
+	 */
+	pci_read_config_word(pdev, I3200_ERRSTS, &info->errsts);
+	if (!(info->errsts & I3200_ERRSTS_BITS))
+		return;
+
+	info->eccerrlog[0] = readq(window + I3200_C0ECCERRLOG);
+	if (nr_channels == 2)
+		info->eccerrlog[1] = readq(window + I3200_C1ECCERRLOG);
+
+	pci_read_config_word(pdev, I3200_ERRSTS, &info->errsts2);
+
+	/*
+	 * If the error is the same for both reads then the first set
+	 * of reads is valid.  If there is a change then there is a CE
+	 * with no info and the second set of reads is valid and
+	 * should be UE info.
+	 */
+	if ((info->errsts ^ info->errsts2) & I3200_ERRSTS_BITS) {
+		info->eccerrlog[0] = readq(window + I3200_C0ECCERRLOG);
+		if (nr_channels == 2)
+			info->eccerrlog[1] = readq(window + I3200_C1ECCERRLOG);
+	}
+
+	i3200_clear_error_info(mci);
+}
+
+static void i3200_process_error_info(struct mem_ctl_info *mci,
+		struct i3200_error_info *info)
+{
+	int channel;
+	u64 log;
+
+	if (!(info->errsts & I3200_ERRSTS_BITS))
+		return;
+
+	if ((info->errsts ^ info->errsts2) & I3200_ERRSTS_BITS) {
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
+				     -1, -1, -1, "UE overwrote CE", "");
+		info->errsts = info->errsts2;
+	}
+
+	for (channel = 0; channel < nr_channels; channel++) {
+		log = info->eccerrlog[channel];
+		if (log & I3200_ECCERRLOG_UE) {
+			edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+					     0, 0, 0,
+					     eccerrlog_row(channel, log),
+					     -1, -1,
+					     "i3000 UE", "");
+		} else if (log & I3200_ECCERRLOG_CE) {
+			edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+					     0, 0, eccerrlog_syndrome(log),
+					     eccerrlog_row(channel, log),
+					     -1, -1,
+					     "i3000 CE", "");
+		}
+	}
+}
+
+static void i3200_check(struct mem_ctl_info *mci)
+{
+	struct i3200_error_info info;
+
+	edac_dbg(1, "MC%d\n", mci->mc_idx);
+	i3200_get_and_clear_error_info(mci, &info);
+	i3200_process_error_info(mci, &info);
+}
+
+static void __iomem *i3200_map_mchbar(struct pci_dev *pdev)
+{
+	union {
+		u64 mchbar;
+		struct {
+			u32 mchbar_low;
+			u32 mchbar_high;
+		};
+	} u;
+	void __iomem *window;
+
+	pci_read_config_dword(pdev, I3200_MCHBAR_LOW, &u.mchbar_low);
+	pci_read_config_dword(pdev, I3200_MCHBAR_HIGH, &u.mchbar_high);
+	u.mchbar &= I3200_MCHBAR_MASK;
+
+	if (u.mchbar != (resource_size_t)u.mchbar) {
+		printk(KERN_ERR
+			"i3200: mmio space beyond accessible range (0x%llx)\n",
+			(unsigned long long)u.mchbar);
+		return NULL;
+	}
+
+	window = ioremap_nocache(u.mchbar, I3200_MMR_WINDOW_SIZE);
+	if (!window)
+		printk(KERN_ERR "i3200: cannot map mmio space at 0x%llx\n",
+			(unsigned long long)u.mchbar);
+
+	return window;
+}
+
+
+static void i3200_get_drbs(void __iomem *window,
+	u16 drbs[I3200_CHANNELS][I3200_RANKS_PER_CHANNEL])
+{
+	int i;
+
+	for (i = 0; i < I3200_RANKS_PER_CHANNEL; i++) {
+		drbs[0][i] = readw(window + I3200_C0DRB + 2*i) & I3200_DRB_MASK;
+		drbs[1][i] = readw(window + I3200_C1DRB + 2*i) & I3200_DRB_MASK;
+
+		edac_dbg(0, "drb[0][%d] = %d, drb[1][%d] = %d\n", i, drbs[0][i], i, drbs[1][i]);
+	}
+}
+
+static bool i3200_is_stacked(struct pci_dev *pdev,
+	u16 drbs[I3200_CHANNELS][I3200_RANKS_PER_CHANNEL])
+{
+	u16 tom;
+
+	pci_read_config_word(pdev, I3200_TOM, &tom);
+	tom &= I3200_TOM_MASK;
+
+	return drbs[I3200_CHANNELS - 1][I3200_RANKS_PER_CHANNEL - 1] == tom;
+}
+
+static unsigned long drb_to_nr_pages(
+	u16 drbs[I3200_CHANNELS][I3200_RANKS_PER_CHANNEL], bool stacked,
+	int channel, int rank)
+{
+	int n;
+
+	n = drbs[channel][rank];
+	if (!n)
+		return 0;
+
+	if (rank > 0)
+		n -= drbs[channel][rank - 1];
+	if (stacked && (channel == 1) &&
+	drbs[channel][rank] == drbs[channel][I3200_RANKS_PER_CHANNEL - 1])
+		n -= drbs[0][I3200_RANKS_PER_CHANNEL - 1];
+
+	n <<= (I3200_DRB_SHIFT - PAGE_SHIFT);
+	return n;
+}
+
+static int i3200_probe1(struct pci_dev *pdev, int dev_idx)
+{
+	int rc;
+	int i, j;
+	struct mem_ctl_info *mci = NULL;
+	struct edac_mc_layer layers[2];
+	u16 drbs[I3200_CHANNELS][I3200_RANKS_PER_CHANNEL];
+	bool stacked;
+	void __iomem *window;
+	struct i3200_priv *priv;
+
+	edac_dbg(0, "MC:\n");
+
+	window = i3200_map_mchbar(pdev);
+	if (!window)
+		return -ENODEV;
+
+	i3200_get_drbs(window, drbs);
+	nr_channels = how_many_channels(pdev);
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = I3200_DIMMS;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = nr_channels;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
+			    sizeof(struct i3200_priv));
+	if (!mci)
+		return -ENOMEM;
+
+	edac_dbg(3, "MC: init mci\n");
+
+	mci->pdev = &pdev->dev;
+	mci->mtype_cap = MEM_FLAG_DDR2;
+
+	mci->edac_ctl_cap = EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+
+	mci->mod_name = EDAC_MOD_STR;
+	mci->ctl_name = i3200_devs[dev_idx].ctl_name;
+	mci->dev_name = pci_name(pdev);
+	mci->edac_check = i3200_check;
+	mci->ctl_page_to_phys = NULL;
+	priv = mci->pvt_info;
+	priv->window = window;
+
+	stacked = i3200_is_stacked(pdev, drbs);
+
+	/*
+	 * The dram rank boundary (DRB) reg values are boundary addresses
+	 * for each DRAM rank with a granularity of 64MB.  DRB regs are
+	 * cumulative; the last one will contain the total memory
+	 * contained in all ranks.
+	 */
+	for (i = 0; i < I3200_DIMMS; i++) {
+		unsigned long nr_pages;
+
+		for (j = 0; j < nr_channels; j++) {
+			struct dimm_info *dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
+							       mci->n_layers, i, j, 0);
+
+			nr_pages = drb_to_nr_pages(drbs, stacked, j, i);
+			if (nr_pages == 0)
+				continue;
+
+			edac_dbg(0, "csrow %d, channel %d%s, size = %ld MiB\n", i, j,
+				 stacked ? " (stacked)" : "", PAGES_TO_MiB(nr_pages));
+
+			dimm->nr_pages = nr_pages;
+			dimm->grain = nr_pages << PAGE_SHIFT;
+			dimm->mtype = MEM_DDR2;
+			dimm->dtype = DEV_UNKNOWN;
+			dimm->edac_mode = EDAC_UNKNOWN;
+		}
+	}
+
+	i3200_clear_error_info(mci);
+
+	rc = -ENODEV;
+	if (edac_mc_add_mc(mci)) {
+		edac_dbg(3, "MC: failed edac_mc_add_mc()\n");
+		goto fail;
+	}
+
+	/* get this far and it's successful */
+	edac_dbg(3, "MC: success\n");
+	return 0;
+
+fail:
+	iounmap(window);
+	if (mci)
+		edac_mc_free(mci);
+
+	return rc;
+}
+
+static int i3200_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	int rc;
+
+	edac_dbg(0, "MC:\n");
+
+	if (pci_enable_device(pdev) < 0)
+		return -EIO;
+
+	rc = i3200_probe1(pdev, ent->driver_data);
+	if (!mci_pdev)
+		mci_pdev = pci_dev_get(pdev);
+
+	return rc;
+}
+
+static void i3200_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+	struct i3200_priv *priv;
+
+	edac_dbg(0, "\n");
+
+	mci = edac_mc_del_mc(&pdev->dev);
+	if (!mci)
+		return;
+
+	priv = mci->pvt_info;
+	iounmap(priv->window);
+
+	edac_mc_free(mci);
+
+	pci_disable_device(pdev);
+}
+
+static const struct pci_device_id i3200_pci_tbl[] = {
+	{
+		PCI_VEND_DEV(INTEL, 3200_HB), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		I3200},
+	{
+		0,
+	}            /* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, i3200_pci_tbl);
+
+static struct pci_driver i3200_driver = {
+	.name = EDAC_MOD_STR,
+	.probe = i3200_init_one,
+	.remove = i3200_remove_one,
+	.id_table = i3200_pci_tbl,
+};
+
+static int __init i3200_init(void)
+{
+	int pci_rc;
+
+	edac_dbg(3, "MC:\n");
+
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
+
+	pci_rc = pci_register_driver(&i3200_driver);
+	if (pci_rc < 0)
+		goto fail0;
+
+	if (!mci_pdev) {
+		i3200_registered = 0;
+		mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				PCI_DEVICE_ID_INTEL_3200_HB, NULL);
+		if (!mci_pdev) {
+			edac_dbg(0, "i3200 pci_get_device fail\n");
+			pci_rc = -ENODEV;
+			goto fail1;
+		}
+
+		pci_rc = i3200_init_one(mci_pdev, i3200_pci_tbl);
+		if (pci_rc < 0) {
+			edac_dbg(0, "i3200 init fail\n");
+			pci_rc = -ENODEV;
+			goto fail1;
+		}
+	}
+
+	return 0;
+
+fail1:
+	pci_unregister_driver(&i3200_driver);
+
+fail0:
+	pci_dev_put(mci_pdev);
+
+	return pci_rc;
+}
+
+static void __exit i3200_exit(void)
+{
+	edac_dbg(3, "MC:\n");
+
+	pci_unregister_driver(&i3200_driver);
+	if (!i3200_registered) {
+		i3200_remove_one(mci_pdev);
+		pci_dev_put(mci_pdev);
+	}
+}
+
+module_init(i3200_init);
+module_exit(i3200_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Akamai Technologies, Inc.");
+MODULE_DESCRIPTION("MC support for Intel 3200 memory hub controllers");
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c
new file mode 100644
index 000000000..53f24b18c
--- /dev/null
+++ b/drivers/edac/i5000_edac.c
@@ -0,0 +1,1593 @@
+/*
+ * Intel 5000(P/V/X) class Memory Controllers kernel module
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Written by Douglas Thompson Linux Networx (http://lnxi.com)
+ *	norsk5@xmission.com
+ *
+ * This module is based on the following document:
+ *
+ * Intel 5000X Chipset Memory Controller Hub (MCH) - Datasheet
+ * 	http://developer.intel.com/design/chipsets/datashts/313070.htm
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/edac.h>
+#include <asm/mmzone.h>
+
+#include "edac_module.h"
+
+/*
+ * Alter this version for the I5000 module when modifications are made
+ */
+#define I5000_REVISION    " Ver: 2.0.12"
+#define EDAC_MOD_STR      "i5000_edac"
+
+#define i5000_printk(level, fmt, arg...) \
+        edac_printk(level, "i5000", fmt, ##arg)
+
+#define i5000_mc_printk(mci, level, fmt, arg...) \
+        edac_mc_chipset_printk(mci, level, "i5000", fmt, ##arg)
+
+#ifndef PCI_DEVICE_ID_INTEL_FBD_0
+#define PCI_DEVICE_ID_INTEL_FBD_0	0x25F5
+#endif
+#ifndef PCI_DEVICE_ID_INTEL_FBD_1
+#define PCI_DEVICE_ID_INTEL_FBD_1	0x25F6
+#endif
+
+/* Device 16,
+ * Function 0: System Address
+ * Function 1: Memory Branch Map, Control, Errors Register
+ * Function 2: FSB Error Registers
+ *
+ * All 3 functions of Device 16 (0,1,2) share the SAME DID
+ */
+#define	PCI_DEVICE_ID_INTEL_I5000_DEV16	0x25F0
+
+/* OFFSETS for Function 0 */
+
+/* OFFSETS for Function 1 */
+#define		AMBASE			0x48
+#define		MAXCH			0x56
+#define		MAXDIMMPERCH		0x57
+#define		TOLM			0x6C
+#define		REDMEMB			0x7C
+#define			RED_ECC_LOCATOR(x)	((x) & 0x3FFFF)
+#define			REC_ECC_LOCATOR_EVEN(x)	((x) & 0x001FF)
+#define			REC_ECC_LOCATOR_ODD(x)	((x) & 0x3FE00)
+#define		MIR0			0x80
+#define		MIR1			0x84
+#define		MIR2			0x88
+#define		AMIR0			0x8C
+#define		AMIR1			0x90
+#define		AMIR2			0x94
+
+#define		FERR_FAT_FBD		0x98
+#define		NERR_FAT_FBD		0x9C
+#define			EXTRACT_FBDCHAN_INDX(x)	(((x)>>28) & 0x3)
+#define			FERR_FAT_FBDCHAN 0x30000000
+#define			FERR_FAT_M3ERR	0x00000004
+#define			FERR_FAT_M2ERR	0x00000002
+#define			FERR_FAT_M1ERR	0x00000001
+#define			FERR_FAT_MASK	(FERR_FAT_M1ERR | \
+						FERR_FAT_M2ERR | \
+						FERR_FAT_M3ERR)
+
+#define		FERR_NF_FBD		0xA0
+
+/* Thermal and SPD or BFD errors */
+#define			FERR_NF_M28ERR	0x01000000
+#define			FERR_NF_M27ERR	0x00800000
+#define			FERR_NF_M26ERR	0x00400000
+#define			FERR_NF_M25ERR	0x00200000
+#define			FERR_NF_M24ERR	0x00100000
+#define			FERR_NF_M23ERR	0x00080000
+#define			FERR_NF_M22ERR	0x00040000
+#define			FERR_NF_M21ERR	0x00020000
+
+/* Correctable errors */
+#define			FERR_NF_M20ERR	0x00010000
+#define			FERR_NF_M19ERR	0x00008000
+#define			FERR_NF_M18ERR	0x00004000
+#define			FERR_NF_M17ERR	0x00002000
+
+/* Non-Retry or redundant Retry errors */
+#define			FERR_NF_M16ERR	0x00001000
+#define			FERR_NF_M15ERR	0x00000800
+#define			FERR_NF_M14ERR	0x00000400
+#define			FERR_NF_M13ERR	0x00000200
+
+/* Uncorrectable errors */
+#define			FERR_NF_M12ERR	0x00000100
+#define			FERR_NF_M11ERR	0x00000080
+#define			FERR_NF_M10ERR	0x00000040
+#define			FERR_NF_M9ERR	0x00000020
+#define			FERR_NF_M8ERR	0x00000010
+#define			FERR_NF_M7ERR	0x00000008
+#define			FERR_NF_M6ERR	0x00000004
+#define			FERR_NF_M5ERR	0x00000002
+#define			FERR_NF_M4ERR	0x00000001
+
+#define			FERR_NF_UNCORRECTABLE	(FERR_NF_M12ERR | \
+							FERR_NF_M11ERR | \
+							FERR_NF_M10ERR | \
+							FERR_NF_M9ERR | \
+							FERR_NF_M8ERR | \
+							FERR_NF_M7ERR | \
+							FERR_NF_M6ERR | \
+							FERR_NF_M5ERR | \
+							FERR_NF_M4ERR)
+#define			FERR_NF_CORRECTABLE	(FERR_NF_M20ERR | \
+							FERR_NF_M19ERR | \
+							FERR_NF_M18ERR | \
+							FERR_NF_M17ERR)
+#define			FERR_NF_DIMM_SPARE	(FERR_NF_M27ERR | \
+							FERR_NF_M28ERR)
+#define			FERR_NF_THERMAL		(FERR_NF_M26ERR | \
+							FERR_NF_M25ERR | \
+							FERR_NF_M24ERR | \
+							FERR_NF_M23ERR)
+#define			FERR_NF_SPD_PROTOCOL	(FERR_NF_M22ERR)
+#define			FERR_NF_NORTH_CRC	(FERR_NF_M21ERR)
+#define			FERR_NF_NON_RETRY	(FERR_NF_M13ERR | \
+							FERR_NF_M14ERR | \
+							FERR_NF_M15ERR)
+
+#define		NERR_NF_FBD		0xA4
+#define			FERR_NF_MASK		(FERR_NF_UNCORRECTABLE | \
+							FERR_NF_CORRECTABLE | \
+							FERR_NF_DIMM_SPARE | \
+							FERR_NF_THERMAL | \
+							FERR_NF_SPD_PROTOCOL | \
+							FERR_NF_NORTH_CRC | \
+							FERR_NF_NON_RETRY)
+
+#define		EMASK_FBD		0xA8
+#define			EMASK_FBD_M28ERR	0x08000000
+#define			EMASK_FBD_M27ERR	0x04000000
+#define			EMASK_FBD_M26ERR	0x02000000
+#define			EMASK_FBD_M25ERR	0x01000000
+#define			EMASK_FBD_M24ERR	0x00800000
+#define			EMASK_FBD_M23ERR	0x00400000
+#define			EMASK_FBD_M22ERR	0x00200000
+#define			EMASK_FBD_M21ERR	0x00100000
+#define			EMASK_FBD_M20ERR	0x00080000
+#define			EMASK_FBD_M19ERR	0x00040000
+#define			EMASK_FBD_M18ERR	0x00020000
+#define			EMASK_FBD_M17ERR	0x00010000
+
+#define			EMASK_FBD_M15ERR	0x00004000
+#define			EMASK_FBD_M14ERR	0x00002000
+#define			EMASK_FBD_M13ERR	0x00001000
+#define			EMASK_FBD_M12ERR	0x00000800
+#define			EMASK_FBD_M11ERR	0x00000400
+#define			EMASK_FBD_M10ERR	0x00000200
+#define			EMASK_FBD_M9ERR		0x00000100
+#define			EMASK_FBD_M8ERR		0x00000080
+#define			EMASK_FBD_M7ERR		0x00000040
+#define			EMASK_FBD_M6ERR		0x00000020
+#define			EMASK_FBD_M5ERR		0x00000010
+#define			EMASK_FBD_M4ERR		0x00000008
+#define			EMASK_FBD_M3ERR		0x00000004
+#define			EMASK_FBD_M2ERR		0x00000002
+#define			EMASK_FBD_M1ERR		0x00000001
+
+#define			ENABLE_EMASK_FBD_FATAL_ERRORS	(EMASK_FBD_M1ERR | \
+							EMASK_FBD_M2ERR | \
+							EMASK_FBD_M3ERR)
+
+#define 		ENABLE_EMASK_FBD_UNCORRECTABLE	(EMASK_FBD_M4ERR | \
+							EMASK_FBD_M5ERR | \
+							EMASK_FBD_M6ERR | \
+							EMASK_FBD_M7ERR | \
+							EMASK_FBD_M8ERR | \
+							EMASK_FBD_M9ERR | \
+							EMASK_FBD_M10ERR | \
+							EMASK_FBD_M11ERR | \
+							EMASK_FBD_M12ERR)
+#define 		ENABLE_EMASK_FBD_CORRECTABLE	(EMASK_FBD_M17ERR | \
+							EMASK_FBD_M18ERR | \
+							EMASK_FBD_M19ERR | \
+							EMASK_FBD_M20ERR)
+#define			ENABLE_EMASK_FBD_DIMM_SPARE	(EMASK_FBD_M27ERR | \
+							EMASK_FBD_M28ERR)
+#define			ENABLE_EMASK_FBD_THERMALS	(EMASK_FBD_M26ERR | \
+							EMASK_FBD_M25ERR | \
+							EMASK_FBD_M24ERR | \
+							EMASK_FBD_M23ERR)
+#define			ENABLE_EMASK_FBD_SPD_PROTOCOL	(EMASK_FBD_M22ERR)
+#define			ENABLE_EMASK_FBD_NORTH_CRC	(EMASK_FBD_M21ERR)
+#define			ENABLE_EMASK_FBD_NON_RETRY	(EMASK_FBD_M15ERR | \
+							EMASK_FBD_M14ERR | \
+							EMASK_FBD_M13ERR)
+
+#define		ENABLE_EMASK_ALL	(ENABLE_EMASK_FBD_NON_RETRY | \
+					ENABLE_EMASK_FBD_NORTH_CRC | \
+					ENABLE_EMASK_FBD_SPD_PROTOCOL | \
+					ENABLE_EMASK_FBD_THERMALS | \
+					ENABLE_EMASK_FBD_DIMM_SPARE | \
+					ENABLE_EMASK_FBD_FATAL_ERRORS | \
+					ENABLE_EMASK_FBD_CORRECTABLE | \
+					ENABLE_EMASK_FBD_UNCORRECTABLE)
+
+#define		ERR0_FBD		0xAC
+#define		ERR1_FBD		0xB0
+#define		ERR2_FBD		0xB4
+#define		MCERR_FBD		0xB8
+#define		NRECMEMA		0xBE
+#define			NREC_BANK(x)		(((x)>>12) & 0x7)
+#define			NREC_RDWR(x)		(((x)>>11) & 1)
+#define			NREC_RANK(x)		(((x)>>8) & 0x7)
+#define		NRECMEMB		0xC0
+#define			NREC_CAS(x)		(((x)>>16) & 0xFFF)
+#define			NREC_RAS(x)		((x) & 0x7FFF)
+#define		NRECFGLOG		0xC4
+#define		NREEECFBDA		0xC8
+#define		NREEECFBDB		0xCC
+#define		NREEECFBDC		0xD0
+#define		NREEECFBDD		0xD4
+#define		NREEECFBDE		0xD8
+#define		REDMEMA			0xDC
+#define		RECMEMA			0xE2
+#define			REC_BANK(x)		(((x)>>12) & 0x7)
+#define			REC_RDWR(x)		(((x)>>11) & 1)
+#define			REC_RANK(x)		(((x)>>8) & 0x7)
+#define		RECMEMB			0xE4
+#define			REC_CAS(x)		(((x)>>16) & 0xFFFFFF)
+#define			REC_RAS(x)		((x) & 0x7FFF)
+#define		RECFGLOG		0xE8
+#define		RECFBDA			0xEC
+#define		RECFBDB			0xF0
+#define		RECFBDC			0xF4
+#define		RECFBDD			0xF8
+#define		RECFBDE			0xFC
+
+/* OFFSETS for Function 2 */
+
+/*
+ * Device 21,
+ * Function 0: Memory Map Branch 0
+ *
+ * Device 22,
+ * Function 0: Memory Map Branch 1
+ */
+#define PCI_DEVICE_ID_I5000_BRANCH_0	0x25F5
+#define PCI_DEVICE_ID_I5000_BRANCH_1	0x25F6
+
+#define AMB_PRESENT_0	0x64
+#define AMB_PRESENT_1	0x66
+#define MTR0		0x80
+#define MTR1		0x84
+#define MTR2		0x88
+#define MTR3		0x8C
+
+#define NUM_MTRS		4
+#define CHANNELS_PER_BRANCH	2
+#define MAX_BRANCHES		2
+
+/* Defines to extract the various fields from the
+ *	MTRx - Memory Technology Registers
+ */
+#define MTR_DIMMS_PRESENT(mtr)		((mtr) & (0x1 << 8))
+#define MTR_DRAM_WIDTH(mtr)		((((mtr) >> 6) & 0x1) ? 8 : 4)
+#define MTR_DRAM_BANKS(mtr)		((((mtr) >> 5) & 0x1) ? 8 : 4)
+#define MTR_DRAM_BANKS_ADDR_BITS(mtr)	((MTR_DRAM_BANKS(mtr) == 8) ? 3 : 2)
+#define MTR_DIMM_RANK(mtr)		(((mtr) >> 4) & 0x1)
+#define MTR_DIMM_RANK_ADDR_BITS(mtr)	(MTR_DIMM_RANK(mtr) ? 2 : 1)
+#define MTR_DIMM_ROWS(mtr)		(((mtr) >> 2) & 0x3)
+#define MTR_DIMM_ROWS_ADDR_BITS(mtr)	(MTR_DIMM_ROWS(mtr) + 13)
+#define MTR_DIMM_COLS(mtr)		((mtr) & 0x3)
+#define MTR_DIMM_COLS_ADDR_BITS(mtr)	(MTR_DIMM_COLS(mtr) + 10)
+
+/* enables the report of miscellaneous messages as CE errors - default off */
+static int misc_messages;
+
+/* Enumeration of supported devices */
+enum i5000_chips {
+	I5000P = 0,
+	I5000V = 1,		/* future */
+	I5000X = 2		/* future */
+};
+
+/* Device name and register DID (Device ID) */
+struct i5000_dev_info {
+	const char *ctl_name;	/* name for this device */
+	u16 fsb_mapping_errors;	/* DID for the branchmap,control */
+};
+
+/* Table of devices attributes supported by this driver */
+static const struct i5000_dev_info i5000_devs[] = {
+	[I5000P] = {
+		.ctl_name = "I5000",
+		.fsb_mapping_errors = PCI_DEVICE_ID_INTEL_I5000_DEV16,
+	},
+};
+
+struct i5000_dimm_info {
+	int megabytes;		/* size, 0 means not present  */
+	int dual_rank;
+};
+
+#define	MAX_CHANNELS	6	/* max possible channels */
+#define MAX_CSROWS	(8*2)	/* max possible csrows per channel */
+
+/* driver private data structure */
+struct i5000_pvt {
+	struct pci_dev *system_address;	/* 16.0 */
+	struct pci_dev *branchmap_werrors;	/* 16.1 */
+	struct pci_dev *fsb_error_regs;	/* 16.2 */
+	struct pci_dev *branch_0;	/* 21.0 */
+	struct pci_dev *branch_1;	/* 22.0 */
+
+	u16 tolm;		/* top of low memory */
+	union {
+		u64 ambase;		/* AMB BAR */
+		struct {
+			u32 ambase_bottom;
+			u32 ambase_top;
+		} u __packed;
+	};
+
+	u16 mir0, mir1, mir2;
+
+	u16 b0_mtr[NUM_MTRS];	/* Memory Technlogy Reg */
+	u16 b0_ambpresent0;	/* Branch 0, Channel 0 */
+	u16 b0_ambpresent1;	/* Brnach 0, Channel 1 */
+
+	u16 b1_mtr[NUM_MTRS];	/* Memory Technlogy Reg */
+	u16 b1_ambpresent0;	/* Branch 1, Channel 8 */
+	u16 b1_ambpresent1;	/* Branch 1, Channel 1 */
+
+	/* DIMM information matrix, allocating architecture maximums */
+	struct i5000_dimm_info dimm_info[MAX_CSROWS][MAX_CHANNELS];
+
+	/* Actual values for this controller */
+	int maxch;		/* Max channels */
+	int maxdimmperch;	/* Max DIMMs per channel */
+};
+
+/* I5000 MCH error information retrieved from Hardware */
+struct i5000_error_info {
+
+	/* These registers are always read from the MC */
+	u32 ferr_fat_fbd;	/* First Errors Fatal */
+	u32 nerr_fat_fbd;	/* Next Errors Fatal */
+	u32 ferr_nf_fbd;	/* First Errors Non-Fatal */
+	u32 nerr_nf_fbd;	/* Next Errors Non-Fatal */
+
+	/* These registers are input ONLY if there was a Recoverable  Error */
+	u32 redmemb;		/* Recoverable Mem Data Error log B */
+	u16 recmema;		/* Recoverable Mem Error log A */
+	u32 recmemb;		/* Recoverable Mem Error log B */
+
+	/* These registers are input ONLY if there was a
+	 * Non-Recoverable Error */
+	u16 nrecmema;		/* Non-Recoverable Mem log A */
+	u32 nrecmemb;		/* Non-Recoverable Mem log B */
+
+};
+
+static struct edac_pci_ctl_info *i5000_pci;
+
+/*
+ *	i5000_get_error_info	Retrieve the hardware error information from
+ *				the hardware and cache it in the 'info'
+ *				structure
+ */
+static void i5000_get_error_info(struct mem_ctl_info *mci,
+				 struct i5000_error_info *info)
+{
+	struct i5000_pvt *pvt;
+	u32 value;
+
+	pvt = mci->pvt_info;
+
+	/* read in the 1st FATAL error register */
+	pci_read_config_dword(pvt->branchmap_werrors, FERR_FAT_FBD, &value);
+
+	/* Mask only the bits that the doc says are valid
+	 */
+	value &= (FERR_FAT_FBDCHAN | FERR_FAT_MASK);
+
+	/* If there is an error, then read in the */
+	/* NEXT FATAL error register and the Memory Error Log Register A */
+	if (value & FERR_FAT_MASK) {
+		info->ferr_fat_fbd = value;
+
+		/* harvest the various error data we need */
+		pci_read_config_dword(pvt->branchmap_werrors,
+				NERR_FAT_FBD, &info->nerr_fat_fbd);
+		pci_read_config_word(pvt->branchmap_werrors,
+				NRECMEMA, &info->nrecmema);
+		pci_read_config_dword(pvt->branchmap_werrors,
+				NRECMEMB, &info->nrecmemb);
+
+		/* Clear the error bits, by writing them back */
+		pci_write_config_dword(pvt->branchmap_werrors,
+				FERR_FAT_FBD, value);
+	} else {
+		info->ferr_fat_fbd = 0;
+		info->nerr_fat_fbd = 0;
+		info->nrecmema = 0;
+		info->nrecmemb = 0;
+	}
+
+	/* read in the 1st NON-FATAL error register */
+	pci_read_config_dword(pvt->branchmap_werrors, FERR_NF_FBD, &value);
+
+	/* If there is an error, then read in the 1st NON-FATAL error
+	 * register as well */
+	if (value & FERR_NF_MASK) {
+		info->ferr_nf_fbd = value;
+
+		/* harvest the various error data we need */
+		pci_read_config_dword(pvt->branchmap_werrors,
+				NERR_NF_FBD, &info->nerr_nf_fbd);
+		pci_read_config_word(pvt->branchmap_werrors,
+				RECMEMA, &info->recmema);
+		pci_read_config_dword(pvt->branchmap_werrors,
+				RECMEMB, &info->recmemb);
+		pci_read_config_dword(pvt->branchmap_werrors,
+				REDMEMB, &info->redmemb);
+
+		/* Clear the error bits, by writing them back */
+		pci_write_config_dword(pvt->branchmap_werrors,
+				FERR_NF_FBD, value);
+	} else {
+		info->ferr_nf_fbd = 0;
+		info->nerr_nf_fbd = 0;
+		info->recmema = 0;
+		info->recmemb = 0;
+		info->redmemb = 0;
+	}
+}
+
+/*
+ * i5000_process_fatal_error_info(struct mem_ctl_info *mci,
+ * 					struct i5000_error_info *info,
+ * 					int handle_errors);
+ *
+ *	handle the Intel FATAL errors, if any
+ */
+static void i5000_process_fatal_error_info(struct mem_ctl_info *mci,
+					struct i5000_error_info *info,
+					int handle_errors)
+{
+	char msg[EDAC_MC_LABEL_LEN + 1 + 160];
+	char *specific = NULL;
+	u32 allErrors;
+	int channel;
+	int bank;
+	int rank;
+	int rdwr;
+	int ras, cas;
+
+	/* mask off the Error bits that are possible */
+	allErrors = (info->ferr_fat_fbd & FERR_FAT_MASK);
+	if (!allErrors)
+		return;		/* if no error, return now */
+
+	channel = EXTRACT_FBDCHAN_INDX(info->ferr_fat_fbd);
+
+	/* Use the NON-Recoverable macros to extract data */
+	bank = NREC_BANK(info->nrecmema);
+	rank = NREC_RANK(info->nrecmema);
+	rdwr = NREC_RDWR(info->nrecmema);
+	ras = NREC_RAS(info->nrecmemb);
+	cas = NREC_CAS(info->nrecmemb);
+
+	edac_dbg(0, "\t\tCSROW= %d  Channel= %d (DRAM Bank= %d rdwr= %s ras= %d cas= %d)\n",
+		 rank, channel, bank,
+		 rdwr ? "Write" : "Read", ras, cas);
+
+	/* Only 1 bit will be on */
+	switch (allErrors) {
+	case FERR_FAT_M1ERR:
+		specific = "Alert on non-redundant retry or fast "
+				"reset timeout";
+		break;
+	case FERR_FAT_M2ERR:
+		specific = "Northbound CRC error on non-redundant "
+				"retry";
+		break;
+	case FERR_FAT_M3ERR:
+		{
+		static int done;
+
+		/*
+		 * This error is generated to inform that the intelligent
+		 * throttling is disabled and the temperature passed the
+		 * specified middle point. Since this is something the BIOS
+		 * should take care of, we'll warn only once to avoid
+		 * worthlessly flooding the log.
+		 */
+		if (done)
+			return;
+		done++;
+
+		specific = ">Tmid Thermal event with intelligent "
+			   "throttling disabled";
+		}
+		break;
+	}
+
+	/* Form out message */
+	snprintf(msg, sizeof(msg),
+		 "Bank=%d RAS=%d CAS=%d FATAL Err=0x%x (%s)",
+		 bank, ras, cas, allErrors, specific);
+
+	/* Call the helper to output message */
+	edac_mc_handle_error(HW_EVENT_ERR_FATAL, mci, 1, 0, 0, 0,
+			     channel >> 1, channel & 1, rank,
+			     rdwr ? "Write error" : "Read error",
+			     msg);
+}
+
+/*
+ * i5000_process_fatal_error_info(struct mem_ctl_info *mci,
+ * 				struct i5000_error_info *info,
+ * 				int handle_errors);
+ *
+ *	handle the Intel NON-FATAL errors, if any
+ */
+static void i5000_process_nonfatal_error_info(struct mem_ctl_info *mci,
+					struct i5000_error_info *info,
+					int handle_errors)
+{
+	char msg[EDAC_MC_LABEL_LEN + 1 + 170];
+	char *specific = NULL;
+	u32 allErrors;
+	u32 ue_errors;
+	u32 ce_errors;
+	u32 misc_errors;
+	int branch;
+	int channel;
+	int bank;
+	int rank;
+	int rdwr;
+	int ras, cas;
+
+	/* mask off the Error bits that are possible */
+	allErrors = (info->ferr_nf_fbd & FERR_NF_MASK);
+	if (!allErrors)
+		return;		/* if no error, return now */
+
+	/* ONLY ONE of the possible error bits will be set, as per the docs */
+	ue_errors = allErrors & FERR_NF_UNCORRECTABLE;
+	if (ue_errors) {
+		edac_dbg(0, "\tUncorrected bits= 0x%x\n", ue_errors);
+
+		branch = EXTRACT_FBDCHAN_INDX(info->ferr_nf_fbd);
+
+		/*
+		 * According with i5000 datasheet, bit 28 has no significance
+		 * for errors M4Err-M12Err and M17Err-M21Err, on FERR_NF_FBD
+		 */
+		channel = branch & 2;
+
+		bank = NREC_BANK(info->nrecmema);
+		rank = NREC_RANK(info->nrecmema);
+		rdwr = NREC_RDWR(info->nrecmema);
+		ras = NREC_RAS(info->nrecmemb);
+		cas = NREC_CAS(info->nrecmemb);
+
+		edac_dbg(0, "\t\tCSROW= %d  Channels= %d,%d  (Branch= %d DRAM Bank= %d rdwr= %s ras= %d cas= %d)\n",
+			 rank, channel, channel + 1, branch >> 1, bank,
+			 rdwr ? "Write" : "Read", ras, cas);
+
+		switch (ue_errors) {
+		case FERR_NF_M12ERR:
+			specific = "Non-Aliased Uncorrectable Patrol Data ECC";
+			break;
+		case FERR_NF_M11ERR:
+			specific = "Non-Aliased Uncorrectable Spare-Copy "
+					"Data ECC";
+			break;
+		case FERR_NF_M10ERR:
+			specific = "Non-Aliased Uncorrectable Mirrored Demand "
+					"Data ECC";
+			break;
+		case FERR_NF_M9ERR:
+			specific = "Non-Aliased Uncorrectable Non-Mirrored "
+					"Demand Data ECC";
+			break;
+		case FERR_NF_M8ERR:
+			specific = "Aliased Uncorrectable Patrol Data ECC";
+			break;
+		case FERR_NF_M7ERR:
+			specific = "Aliased Uncorrectable Spare-Copy Data ECC";
+			break;
+		case FERR_NF_M6ERR:
+			specific = "Aliased Uncorrectable Mirrored Demand "
+					"Data ECC";
+			break;
+		case FERR_NF_M5ERR:
+			specific = "Aliased Uncorrectable Non-Mirrored Demand "
+					"Data ECC";
+			break;
+		case FERR_NF_M4ERR:
+			specific = "Uncorrectable Data ECC on Replay";
+			break;
+		}
+
+		/* Form out message */
+		snprintf(msg, sizeof(msg),
+			 "Rank=%d Bank=%d RAS=%d CAS=%d, UE Err=0x%x (%s)",
+			 rank, bank, ras, cas, ue_errors, specific);
+
+		/* Call the helper to output message */
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
+				channel >> 1, -1, rank,
+				rdwr ? "Write error" : "Read error",
+				msg);
+	}
+
+	/* Check correctable errors */
+	ce_errors = allErrors & FERR_NF_CORRECTABLE;
+	if (ce_errors) {
+		edac_dbg(0, "\tCorrected bits= 0x%x\n", ce_errors);
+
+		branch = EXTRACT_FBDCHAN_INDX(info->ferr_nf_fbd);
+
+		channel = 0;
+		if (REC_ECC_LOCATOR_ODD(info->redmemb))
+			channel = 1;
+
+		/* Convert channel to be based from zero, instead of
+		 * from branch base of 0 */
+		channel += branch;
+
+		bank = REC_BANK(info->recmema);
+		rank = REC_RANK(info->recmema);
+		rdwr = REC_RDWR(info->recmema);
+		ras = REC_RAS(info->recmemb);
+		cas = REC_CAS(info->recmemb);
+
+		edac_dbg(0, "\t\tCSROW= %d Channel= %d  (Branch %d DRAM Bank= %d rdwr= %s ras= %d cas= %d)\n",
+			 rank, channel, branch >> 1, bank,
+			 rdwr ? "Write" : "Read", ras, cas);
+
+		switch (ce_errors) {
+		case FERR_NF_M17ERR:
+			specific = "Correctable Non-Mirrored Demand Data ECC";
+			break;
+		case FERR_NF_M18ERR:
+			specific = "Correctable Mirrored Demand Data ECC";
+			break;
+		case FERR_NF_M19ERR:
+			specific = "Correctable Spare-Copy Data ECC";
+			break;
+		case FERR_NF_M20ERR:
+			specific = "Correctable Patrol Data ECC";
+			break;
+		}
+
+		/* Form out message */
+		snprintf(msg, sizeof(msg),
+			 "Rank=%d Bank=%d RDWR=%s RAS=%d "
+			 "CAS=%d, CE Err=0x%x (%s))", branch >> 1, bank,
+			 rdwr ? "Write" : "Read", ras, cas, ce_errors,
+			 specific);
+
+		/* Call the helper to output message */
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 0, 0, 0,
+				channel >> 1, channel % 2, rank,
+				rdwr ? "Write error" : "Read error",
+				msg);
+	}
+
+	if (!misc_messages)
+		return;
+
+	misc_errors = allErrors & (FERR_NF_NON_RETRY | FERR_NF_NORTH_CRC |
+				   FERR_NF_SPD_PROTOCOL | FERR_NF_DIMM_SPARE);
+	if (misc_errors) {
+		switch (misc_errors) {
+		case FERR_NF_M13ERR:
+			specific = "Non-Retry or Redundant Retry FBD Memory "
+					"Alert or Redundant Fast Reset Timeout";
+			break;
+		case FERR_NF_M14ERR:
+			specific = "Non-Retry or Redundant Retry FBD "
+					"Configuration Alert";
+			break;
+		case FERR_NF_M15ERR:
+			specific = "Non-Retry or Redundant Retry FBD "
+					"Northbound CRC error on read data";
+			break;
+		case FERR_NF_M21ERR:
+			specific = "FBD Northbound CRC error on "
+					"FBD Sync Status";
+			break;
+		case FERR_NF_M22ERR:
+			specific = "SPD protocol error";
+			break;
+		case FERR_NF_M27ERR:
+			specific = "DIMM-spare copy started";
+			break;
+		case FERR_NF_M28ERR:
+			specific = "DIMM-spare copy completed";
+			break;
+		}
+		branch = EXTRACT_FBDCHAN_INDX(info->ferr_nf_fbd);
+
+		/* Form out message */
+		snprintf(msg, sizeof(msg),
+			 "Err=%#x (%s)", misc_errors, specific);
+
+		/* Call the helper to output message */
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 0, 0, 0,
+				branch >> 1, -1, -1,
+				"Misc error", msg);
+	}
+}
+
+/*
+ *	i5000_process_error_info	Process the error info that is
+ *	in the 'info' structure, previously retrieved from hardware
+ */
+static void i5000_process_error_info(struct mem_ctl_info *mci,
+				struct i5000_error_info *info,
+				int handle_errors)
+{
+	/* First handle any fatal errors that occurred */
+	i5000_process_fatal_error_info(mci, info, handle_errors);
+
+	/* now handle any non-fatal errors that occurred */
+	i5000_process_nonfatal_error_info(mci, info, handle_errors);
+}
+
+/*
+ *	i5000_clear_error	Retrieve any error from the hardware
+ *				but do NOT process that error.
+ *				Used for 'clearing' out of previous errors
+ *				Called by the Core module.
+ */
+static void i5000_clear_error(struct mem_ctl_info *mci)
+{
+	struct i5000_error_info info;
+
+	i5000_get_error_info(mci, &info);
+}
+
+/*
+ *	i5000_check_error	Retrieve and process errors reported by the
+ *				hardware. Called by the Core module.
+ */
+static void i5000_check_error(struct mem_ctl_info *mci)
+{
+	struct i5000_error_info info;
+	edac_dbg(4, "MC%d\n", mci->mc_idx);
+	i5000_get_error_info(mci, &info);
+	i5000_process_error_info(mci, &info, 1);
+}
+
+/*
+ *	i5000_get_devices	Find and perform 'get' operation on the MCH's
+ *			device/functions we want to reference for this driver
+ *
+ *			Need to 'get' device 16 func 1 and func 2
+ */
+static int i5000_get_devices(struct mem_ctl_info *mci, int dev_idx)
+{
+	//const struct i5000_dev_info *i5000_dev = &i5000_devs[dev_idx];
+	struct i5000_pvt *pvt;
+	struct pci_dev *pdev;
+
+	pvt = mci->pvt_info;
+
+	/* Attempt to 'get' the MCH register we want */
+	pdev = NULL;
+	while (1) {
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				PCI_DEVICE_ID_INTEL_I5000_DEV16, pdev);
+
+		/* End of list, leave */
+		if (pdev == NULL) {
+			i5000_printk(KERN_ERR,
+				"'system address,Process Bus' "
+				"device not found:"
+				"vendor 0x%x device 0x%x FUNC 1 "
+				"(broken BIOS?)\n",
+				PCI_VENDOR_ID_INTEL,
+				PCI_DEVICE_ID_INTEL_I5000_DEV16);
+
+			return 1;
+		}
+
+		/* Scan for device 16 func 1 */
+		if (PCI_FUNC(pdev->devfn) == 1)
+			break;
+	}
+
+	pvt->branchmap_werrors = pdev;
+
+	/* Attempt to 'get' the MCH register we want */
+	pdev = NULL;
+	while (1) {
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				PCI_DEVICE_ID_INTEL_I5000_DEV16, pdev);
+
+		if (pdev == NULL) {
+			i5000_printk(KERN_ERR,
+				"MC: 'branchmap,control,errors' "
+				"device not found:"
+				"vendor 0x%x device 0x%x Func 2 "
+				"(broken BIOS?)\n",
+				PCI_VENDOR_ID_INTEL,
+				PCI_DEVICE_ID_INTEL_I5000_DEV16);
+
+			pci_dev_put(pvt->branchmap_werrors);
+			return 1;
+		}
+
+		/* Scan for device 16 func 1 */
+		if (PCI_FUNC(pdev->devfn) == 2)
+			break;
+	}
+
+	pvt->fsb_error_regs = pdev;
+
+	edac_dbg(1, "System Address, processor bus- PCI Bus ID: %s  %x:%x\n",
+		 pci_name(pvt->system_address),
+		 pvt->system_address->vendor, pvt->system_address->device);
+	edac_dbg(1, "Branchmap, control and errors - PCI Bus ID: %s  %x:%x\n",
+		 pci_name(pvt->branchmap_werrors),
+		 pvt->branchmap_werrors->vendor,
+		 pvt->branchmap_werrors->device);
+	edac_dbg(1, "FSB Error Regs - PCI Bus ID: %s  %x:%x\n",
+		 pci_name(pvt->fsb_error_regs),
+		 pvt->fsb_error_regs->vendor, pvt->fsb_error_regs->device);
+
+	pdev = NULL;
+	pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+			PCI_DEVICE_ID_I5000_BRANCH_0, pdev);
+
+	if (pdev == NULL) {
+		i5000_printk(KERN_ERR,
+			"MC: 'BRANCH 0' device not found:"
+			"vendor 0x%x device 0x%x Func 0 (broken BIOS?)\n",
+			PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_I5000_BRANCH_0);
+
+		pci_dev_put(pvt->branchmap_werrors);
+		pci_dev_put(pvt->fsb_error_regs);
+		return 1;
+	}
+
+	pvt->branch_0 = pdev;
+
+	/* If this device claims to have more than 2 channels then
+	 * fetch Branch 1's information
+	 */
+	if (pvt->maxch >= CHANNELS_PER_BRANCH) {
+		pdev = NULL;
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				PCI_DEVICE_ID_I5000_BRANCH_1, pdev);
+
+		if (pdev == NULL) {
+			i5000_printk(KERN_ERR,
+				"MC: 'BRANCH 1' device not found:"
+				"vendor 0x%x device 0x%x Func 0 "
+				"(broken BIOS?)\n",
+				PCI_VENDOR_ID_INTEL,
+				PCI_DEVICE_ID_I5000_BRANCH_1);
+
+			pci_dev_put(pvt->branchmap_werrors);
+			pci_dev_put(pvt->fsb_error_regs);
+			pci_dev_put(pvt->branch_0);
+			return 1;
+		}
+
+		pvt->branch_1 = pdev;
+	}
+
+	return 0;
+}
+
+/*
+ *	i5000_put_devices	'put' all the devices that we have
+ *				reserved via 'get'
+ */
+static void i5000_put_devices(struct mem_ctl_info *mci)
+{
+	struct i5000_pvt *pvt;
+
+	pvt = mci->pvt_info;
+
+	pci_dev_put(pvt->branchmap_werrors);	/* FUNC 1 */
+	pci_dev_put(pvt->fsb_error_regs);	/* FUNC 2 */
+	pci_dev_put(pvt->branch_0);	/* DEV 21 */
+
+	/* Only if more than 2 channels do we release the second branch */
+	if (pvt->maxch >= CHANNELS_PER_BRANCH)
+		pci_dev_put(pvt->branch_1);	/* DEV 22 */
+}
+
+/*
+ *	determine_amb_resent
+ *
+ *		the information is contained in NUM_MTRS different registers
+ *		determineing which of the NUM_MTRS requires knowing
+ *		which channel is in question
+ *
+ *	2 branches, each with 2 channels
+ *		b0_ambpresent0 for channel '0'
+ *		b0_ambpresent1 for channel '1'
+ *		b1_ambpresent0 for channel '2'
+ *		b1_ambpresent1 for channel '3'
+ */
+static int determine_amb_present_reg(struct i5000_pvt *pvt, int channel)
+{
+	int amb_present;
+
+	if (channel < CHANNELS_PER_BRANCH) {
+		if (channel & 0x1)
+			amb_present = pvt->b0_ambpresent1;
+		else
+			amb_present = pvt->b0_ambpresent0;
+	} else {
+		if (channel & 0x1)
+			amb_present = pvt->b1_ambpresent1;
+		else
+			amb_present = pvt->b1_ambpresent0;
+	}
+
+	return amb_present;
+}
+
+/*
+ * determine_mtr(pvt, csrow, channel)
+ *
+ *	return the proper MTR register as determine by the csrow and channel desired
+ */
+static int determine_mtr(struct i5000_pvt *pvt, int slot, int channel)
+{
+	int mtr;
+
+	if (channel < CHANNELS_PER_BRANCH)
+		mtr = pvt->b0_mtr[slot];
+	else
+		mtr = pvt->b1_mtr[slot];
+
+	return mtr;
+}
+
+/*
+ */
+static void decode_mtr(int slot_row, u16 mtr)
+{
+	int ans;
+
+	ans = MTR_DIMMS_PRESENT(mtr);
+
+	edac_dbg(2, "\tMTR%d=0x%x:  DIMMs are %sPresent\n",
+		 slot_row, mtr, ans ? "" : "NOT ");
+	if (!ans)
+		return;
+
+	edac_dbg(2, "\t\tWIDTH: x%d\n", MTR_DRAM_WIDTH(mtr));
+	edac_dbg(2, "\t\tNUMBANK: %d bank(s)\n", MTR_DRAM_BANKS(mtr));
+	edac_dbg(2, "\t\tNUMRANK: %s\n",
+		 MTR_DIMM_RANK(mtr) ? "double" : "single");
+	edac_dbg(2, "\t\tNUMROW: %s\n",
+		 MTR_DIMM_ROWS(mtr) == 0 ? "8,192 - 13 rows" :
+		 MTR_DIMM_ROWS(mtr) == 1 ? "16,384 - 14 rows" :
+		 MTR_DIMM_ROWS(mtr) == 2 ? "32,768 - 15 rows" :
+		 "reserved");
+	edac_dbg(2, "\t\tNUMCOL: %s\n",
+		 MTR_DIMM_COLS(mtr) == 0 ? "1,024 - 10 columns" :
+		 MTR_DIMM_COLS(mtr) == 1 ? "2,048 - 11 columns" :
+		 MTR_DIMM_COLS(mtr) == 2 ? "4,096 - 12 columns" :
+		 "reserved");
+}
+
+static void handle_channel(struct i5000_pvt *pvt, int slot, int channel,
+			struct i5000_dimm_info *dinfo)
+{
+	int mtr;
+	int amb_present_reg;
+	int addrBits;
+
+	mtr = determine_mtr(pvt, slot, channel);
+	if (MTR_DIMMS_PRESENT(mtr)) {
+		amb_present_reg = determine_amb_present_reg(pvt, channel);
+
+		/* Determine if there is a DIMM present in this DIMM slot */
+		if (amb_present_reg) {
+			dinfo->dual_rank = MTR_DIMM_RANK(mtr);
+
+			/* Start with the number of bits for a Bank
+				* on the DRAM */
+			addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr);
+			/* Add the number of ROW bits */
+			addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr);
+			/* add the number of COLUMN bits */
+			addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr);
+
+			/* Dual-rank memories have twice the size */
+			if (dinfo->dual_rank)
+				addrBits++;
+
+			addrBits += 6;	/* add 64 bits per DIMM */
+			addrBits -= 20;	/* divide by 2^^20 */
+			addrBits -= 3;	/* 8 bits per bytes */
+
+			dinfo->megabytes = 1 << addrBits;
+		}
+	}
+}
+
+/*
+ *	calculate_dimm_size
+ *
+ *	also will output a DIMM matrix map, if debug is enabled, for viewing
+ *	how the DIMMs are populated
+ */
+static void calculate_dimm_size(struct i5000_pvt *pvt)
+{
+	struct i5000_dimm_info *dinfo;
+	int slot, channel, branch;
+	char *p, *mem_buffer;
+	int space, n;
+
+	/* ================= Generate some debug output ================= */
+	space = PAGE_SIZE;
+	mem_buffer = p = kmalloc(space, GFP_KERNEL);
+	if (p == NULL) {
+		i5000_printk(KERN_ERR, "MC: %s:%s() kmalloc() failed\n",
+			__FILE__, __func__);
+		return;
+	}
+
+	/* Scan all the actual slots
+	 * and calculate the information for each DIMM
+	 * Start with the highest slot first, to display it first
+	 * and work toward the 0th slot
+	 */
+	for (slot = pvt->maxdimmperch - 1; slot >= 0; slot--) {
+
+		/* on an odd slot, first output a 'boundary' marker,
+		 * then reset the message buffer  */
+		if (slot & 0x1) {
+			n = snprintf(p, space, "--------------------------"
+				"--------------------------------");
+			p += n;
+			space -= n;
+			edac_dbg(2, "%s\n", mem_buffer);
+			p = mem_buffer;
+			space = PAGE_SIZE;
+		}
+		n = snprintf(p, space, "slot %2d    ", slot);
+		p += n;
+		space -= n;
+
+		for (channel = 0; channel < pvt->maxch; channel++) {
+			dinfo = &pvt->dimm_info[slot][channel];
+			handle_channel(pvt, slot, channel, dinfo);
+			if (dinfo->megabytes)
+				n = snprintf(p, space, "%4d MB %dR| ",
+					     dinfo->megabytes, dinfo->dual_rank + 1);
+			else
+				n = snprintf(p, space, "%4d MB   | ", 0);
+			p += n;
+			space -= n;
+		}
+		p += n;
+		space -= n;
+		edac_dbg(2, "%s\n", mem_buffer);
+		p = mem_buffer;
+		space = PAGE_SIZE;
+	}
+
+	/* Output the last bottom 'boundary' marker */
+	n = snprintf(p, space, "--------------------------"
+		"--------------------------------");
+	p += n;
+	space -= n;
+	edac_dbg(2, "%s\n", mem_buffer);
+	p = mem_buffer;
+	space = PAGE_SIZE;
+
+	/* now output the 'channel' labels */
+	n = snprintf(p, space, "           ");
+	p += n;
+	space -= n;
+	for (channel = 0; channel < pvt->maxch; channel++) {
+		n = snprintf(p, space, "channel %d | ", channel);
+		p += n;
+		space -= n;
+	}
+	edac_dbg(2, "%s\n", mem_buffer);
+	p = mem_buffer;
+	space = PAGE_SIZE;
+
+	n = snprintf(p, space, "           ");
+	p += n;
+	for (branch = 0; branch < MAX_BRANCHES; branch++) {
+		n = snprintf(p, space, "       branch %d       | ", branch);
+		p += n;
+		space -= n;
+	}
+
+	/* output the last message and free buffer */
+	edac_dbg(2, "%s\n", mem_buffer);
+	kfree(mem_buffer);
+}
+
+/*
+ *	i5000_get_mc_regs	read in the necessary registers and
+ *				cache locally
+ *
+ *			Fills in the private data members
+ */
+static void i5000_get_mc_regs(struct mem_ctl_info *mci)
+{
+	struct i5000_pvt *pvt;
+	u32 actual_tolm;
+	u16 limit;
+	int slot_row;
+	int maxch;
+	int maxdimmperch;
+	int way0, way1;
+
+	pvt = mci->pvt_info;
+
+	pci_read_config_dword(pvt->system_address, AMBASE,
+			&pvt->u.ambase_bottom);
+	pci_read_config_dword(pvt->system_address, AMBASE + sizeof(u32),
+			&pvt->u.ambase_top);
+
+	maxdimmperch = pvt->maxdimmperch;
+	maxch = pvt->maxch;
+
+	edac_dbg(2, "AMBASE= 0x%lx  MAXCH= %d  MAX-DIMM-Per-CH= %d\n",
+		 (long unsigned int)pvt->ambase, pvt->maxch, pvt->maxdimmperch);
+
+	/* Get the Branch Map regs */
+	pci_read_config_word(pvt->branchmap_werrors, TOLM, &pvt->tolm);
+	pvt->tolm >>= 12;
+	edac_dbg(2, "TOLM (number of 256M regions) =%u (0x%x)\n",
+		 pvt->tolm, pvt->tolm);
+
+	actual_tolm = pvt->tolm << 28;
+	edac_dbg(2, "Actual TOLM byte addr=%u (0x%x)\n",
+		 actual_tolm, actual_tolm);
+
+	pci_read_config_word(pvt->branchmap_werrors, MIR0, &pvt->mir0);
+	pci_read_config_word(pvt->branchmap_werrors, MIR1, &pvt->mir1);
+	pci_read_config_word(pvt->branchmap_werrors, MIR2, &pvt->mir2);
+
+	/* Get the MIR[0-2] regs */
+	limit = (pvt->mir0 >> 4) & 0x0FFF;
+	way0 = pvt->mir0 & 0x1;
+	way1 = pvt->mir0 & 0x2;
+	edac_dbg(2, "MIR0: limit= 0x%x  WAY1= %u  WAY0= %x\n",
+		 limit, way1, way0);
+	limit = (pvt->mir1 >> 4) & 0x0FFF;
+	way0 = pvt->mir1 & 0x1;
+	way1 = pvt->mir1 & 0x2;
+	edac_dbg(2, "MIR1: limit= 0x%x  WAY1= %u  WAY0= %x\n",
+		 limit, way1, way0);
+	limit = (pvt->mir2 >> 4) & 0x0FFF;
+	way0 = pvt->mir2 & 0x1;
+	way1 = pvt->mir2 & 0x2;
+	edac_dbg(2, "MIR2: limit= 0x%x  WAY1= %u  WAY0= %x\n",
+		 limit, way1, way0);
+
+	/* Get the MTR[0-3] regs */
+	for (slot_row = 0; slot_row < NUM_MTRS; slot_row++) {
+		int where = MTR0 + (slot_row * sizeof(u32));
+
+		pci_read_config_word(pvt->branch_0, where,
+				&pvt->b0_mtr[slot_row]);
+
+		edac_dbg(2, "MTR%d where=0x%x B0 value=0x%x\n",
+			 slot_row, where, pvt->b0_mtr[slot_row]);
+
+		if (pvt->maxch >= CHANNELS_PER_BRANCH) {
+			pci_read_config_word(pvt->branch_1, where,
+					&pvt->b1_mtr[slot_row]);
+			edac_dbg(2, "MTR%d where=0x%x B1 value=0x%x\n",
+				 slot_row, where, pvt->b1_mtr[slot_row]);
+		} else {
+			pvt->b1_mtr[slot_row] = 0;
+		}
+	}
+
+	/* Read and dump branch 0's MTRs */
+	edac_dbg(2, "Memory Technology Registers:\n");
+	edac_dbg(2, "   Branch 0:\n");
+	for (slot_row = 0; slot_row < NUM_MTRS; slot_row++) {
+		decode_mtr(slot_row, pvt->b0_mtr[slot_row]);
+	}
+	pci_read_config_word(pvt->branch_0, AMB_PRESENT_0,
+			&pvt->b0_ambpresent0);
+	edac_dbg(2, "\t\tAMB-Branch 0-present0 0x%x:\n", pvt->b0_ambpresent0);
+	pci_read_config_word(pvt->branch_0, AMB_PRESENT_1,
+			&pvt->b0_ambpresent1);
+	edac_dbg(2, "\t\tAMB-Branch 0-present1 0x%x:\n", pvt->b0_ambpresent1);
+
+	/* Only if we have 2 branchs (4 channels) */
+	if (pvt->maxch < CHANNELS_PER_BRANCH) {
+		pvt->b1_ambpresent0 = 0;
+		pvt->b1_ambpresent1 = 0;
+	} else {
+		/* Read and dump  branch 1's MTRs */
+		edac_dbg(2, "   Branch 1:\n");
+		for (slot_row = 0; slot_row < NUM_MTRS; slot_row++) {
+			decode_mtr(slot_row, pvt->b1_mtr[slot_row]);
+		}
+		pci_read_config_word(pvt->branch_1, AMB_PRESENT_0,
+				&pvt->b1_ambpresent0);
+		edac_dbg(2, "\t\tAMB-Branch 1-present0 0x%x:\n",
+			 pvt->b1_ambpresent0);
+		pci_read_config_word(pvt->branch_1, AMB_PRESENT_1,
+				&pvt->b1_ambpresent1);
+		edac_dbg(2, "\t\tAMB-Branch 1-present1 0x%x:\n",
+			 pvt->b1_ambpresent1);
+	}
+
+	/* Go and determine the size of each DIMM and place in an
+	 * orderly matrix */
+	calculate_dimm_size(pvt);
+}
+
+/*
+ *	i5000_init_csrows	Initialize the 'csrows' table within
+ *				the mci control	structure with the
+ *				addressing of memory.
+ *
+ *	return:
+ *		0	success
+ *		1	no actual memory found on this MC
+ */
+static int i5000_init_csrows(struct mem_ctl_info *mci)
+{
+	struct i5000_pvt *pvt;
+	struct dimm_info *dimm;
+	int empty, channel_count;
+	int max_csrows;
+	int mtr;
+	int csrow_megs;
+	int channel;
+	int slot;
+
+	pvt = mci->pvt_info;
+
+	channel_count = pvt->maxch;
+	max_csrows = pvt->maxdimmperch * 2;
+
+	empty = 1;		/* Assume NO memory */
+
+	/*
+	 * FIXME: The memory layout used to map slot/channel into the
+	 * real memory architecture is weird: branch+slot are "csrows"
+	 * and channel is channel. That required an extra array (dimm_info)
+	 * to map the dimms. A good cleanup would be to remove this array,
+	 * and do a loop here with branch, channel, slot
+	 */
+	for (slot = 0; slot < max_csrows; slot++) {
+		for (channel = 0; channel < pvt->maxch; channel++) {
+
+			mtr = determine_mtr(pvt, slot, channel);
+
+			if (!MTR_DIMMS_PRESENT(mtr))
+				continue;
+
+			dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers,
+				       channel / MAX_BRANCHES,
+				       channel % MAX_BRANCHES, slot);
+
+			csrow_megs = pvt->dimm_info[slot][channel].megabytes;
+			dimm->grain = 8;
+
+			/* Assume DDR2 for now */
+			dimm->mtype = MEM_FB_DDR2;
+
+			/* ask what device type on this row */
+			if (MTR_DRAM_WIDTH(mtr) == 8)
+				dimm->dtype = DEV_X8;
+			else
+				dimm->dtype = DEV_X4;
+
+			dimm->edac_mode = EDAC_S8ECD8ED;
+			dimm->nr_pages = csrow_megs << 8;
+		}
+
+		empty = 0;
+	}
+
+	return empty;
+}
+
+/*
+ *	i5000_enable_error_reporting
+ *			Turn on the memory reporting features of the hardware
+ */
+static void i5000_enable_error_reporting(struct mem_ctl_info *mci)
+{
+	struct i5000_pvt *pvt;
+	u32 fbd_error_mask;
+
+	pvt = mci->pvt_info;
+
+	/* Read the FBD Error Mask Register */
+	pci_read_config_dword(pvt->branchmap_werrors, EMASK_FBD,
+			&fbd_error_mask);
+
+	/* Enable with a '0' */
+	fbd_error_mask &= ~(ENABLE_EMASK_ALL);
+
+	pci_write_config_dword(pvt->branchmap_werrors, EMASK_FBD,
+			fbd_error_mask);
+}
+
+/*
+ * i5000_get_dimm_and_channel_counts(pdev, &nr_csrows, &num_channels)
+ *
+ *	ask the device how many channels are present and how many CSROWS
+ *	 as well
+ */
+static void i5000_get_dimm_and_channel_counts(struct pci_dev *pdev,
+					int *num_dimms_per_channel,
+					int *num_channels)
+{
+	u8 value;
+
+	/* Need to retrieve just how many channels and dimms per channel are
+	 * supported on this memory controller
+	 */
+	pci_read_config_byte(pdev, MAXDIMMPERCH, &value);
+	*num_dimms_per_channel = (int)value;
+
+	pci_read_config_byte(pdev, MAXCH, &value);
+	*num_channels = (int)value;
+}
+
+/*
+ *	i5000_probe1	Probe for ONE instance of device to see if it is
+ *			present.
+ *	return:
+ *		0 for FOUND a device
+ *		< 0 for error code
+ */
+static int i5000_probe1(struct pci_dev *pdev, int dev_idx)
+{
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[3];
+	struct i5000_pvt *pvt;
+	int num_channels;
+	int num_dimms_per_channel;
+
+	edac_dbg(0, "MC: pdev bus %u dev=0x%x fn=0x%x\n",
+		 pdev->bus->number,
+		 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+
+	/* We only are looking for func 0 of the set */
+	if (PCI_FUNC(pdev->devfn) != 0)
+		return -ENODEV;
+
+	/* Ask the devices for the number of CSROWS and CHANNELS so
+	 * that we can calculate the memory resources, etc
+	 *
+	 * The Chipset will report what it can handle which will be greater
+	 * or equal to what the motherboard manufacturer will implement.
+	 *
+	 * As we don't have a motherboard identification routine to determine
+	 * actual number of slots/dimms per channel, we thus utilize the
+	 * resource as specified by the chipset. Thus, we might have
+	 * have more DIMMs per channel than actually on the mobo, but this
+	 * allows the driver to support up to the chipset max, without
+	 * some fancy mobo determination.
+	 */
+	i5000_get_dimm_and_channel_counts(pdev, &num_dimms_per_channel,
+					&num_channels);
+
+	edac_dbg(0, "MC: Number of Branches=2 Channels= %d  DIMMS= %d\n",
+		 num_channels, num_dimms_per_channel);
+
+	/* allocate a new MC control structure */
+
+	layers[0].type = EDAC_MC_LAYER_BRANCH;
+	layers[0].size = MAX_BRANCHES;
+	layers[0].is_virt_csrow = false;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = num_channels / MAX_BRANCHES;
+	layers[1].is_virt_csrow = false;
+	layers[2].type = EDAC_MC_LAYER_SLOT;
+	layers[2].size = num_dimms_per_channel;
+	layers[2].is_virt_csrow = true;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt));
+	if (mci == NULL)
+		return -ENOMEM;
+
+	edac_dbg(0, "MC: mci = %p\n", mci);
+
+	mci->pdev = &pdev->dev;	/* record ptr  to the generic device */
+
+	pvt = mci->pvt_info;
+	pvt->system_address = pdev;	/* Record this device in our private */
+	pvt->maxch = num_channels;
+	pvt->maxdimmperch = num_dimms_per_channel;
+
+	/* 'get' the pci devices we want to reserve for our use */
+	if (i5000_get_devices(mci, dev_idx))
+		goto fail0;
+
+	/* Time to get serious */
+	i5000_get_mc_regs(mci);	/* retrieve the hardware registers */
+
+	mci->mc_idx = 0;
+	mci->mtype_cap = MEM_FLAG_FB_DDR2;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE;
+	mci->edac_cap = EDAC_FLAG_NONE;
+	mci->mod_name = "i5000_edac.c";
+	mci->ctl_name = i5000_devs[dev_idx].ctl_name;
+	mci->dev_name = pci_name(pdev);
+	mci->ctl_page_to_phys = NULL;
+
+	/* Set the function pointer to an actual operation function */
+	mci->edac_check = i5000_check_error;
+
+	/* initialize the MC control structure 'csrows' table
+	 * with the mapping and control information */
+	if (i5000_init_csrows(mci)) {
+		edac_dbg(0, "MC: Setting mci->edac_cap to EDAC_FLAG_NONE because i5000_init_csrows() returned nonzero value\n");
+		mci->edac_cap = EDAC_FLAG_NONE;	/* no csrows found */
+	} else {
+		edac_dbg(1, "MC: Enable error reporting now\n");
+		i5000_enable_error_reporting(mci);
+	}
+
+	/* add this new MC control structure to EDAC's list of MCs */
+	if (edac_mc_add_mc(mci)) {
+		edac_dbg(0, "MC: failed edac_mc_add_mc()\n");
+		/* FIXME: perhaps some code should go here that disables error
+		 * reporting if we just enabled it
+		 */
+		goto fail1;
+	}
+
+	i5000_clear_error(mci);
+
+	/* allocating generic PCI control info */
+	i5000_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
+	if (!i5000_pci) {
+		printk(KERN_WARNING
+			"%s(): Unable to create PCI control\n",
+			__func__);
+		printk(KERN_WARNING
+			"%s(): PCI error report via EDAC not setup\n",
+			__func__);
+	}
+
+	return 0;
+
+	/* Error exit unwinding stack */
+fail1:
+
+	i5000_put_devices(mci);
+
+fail0:
+	edac_mc_free(mci);
+	return -ENODEV;
+}
+
+/*
+ *	i5000_init_one	constructor for one instance of device
+ *
+ * 	returns:
+ *		negative on error
+ *		count (>= 0)
+ */
+static int i5000_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	int rc;
+
+	edac_dbg(0, "MC:\n");
+
+	/* wake up device */
+	rc = pci_enable_device(pdev);
+	if (rc)
+		return rc;
+
+	/* now probe and enable the device */
+	return i5000_probe1(pdev, id->driver_data);
+}
+
+/*
+ *	i5000_remove_one	destructor for one instance of device
+ *
+ */
+static void i5000_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+
+	edac_dbg(0, "\n");
+
+	if (i5000_pci)
+		edac_pci_release_generic_ctl(i5000_pci);
+
+	if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
+		return;
+
+	/* retrieve references to resources, and free those resources */
+	i5000_put_devices(mci);
+	edac_mc_free(mci);
+}
+
+/*
+ *	pci_device_id	table for which devices we are looking for
+ *
+ *	The "E500P" device is the first device supported.
+ */
+static const struct pci_device_id i5000_pci_tbl[] = {
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I5000_DEV16),
+	 .driver_data = I5000P},
+
+	{0,}			/* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, i5000_pci_tbl);
+
+/*
+ *	i5000_driver	pci_driver structure for this module
+ *
+ */
+static struct pci_driver i5000_driver = {
+	.name = KBUILD_BASENAME,
+	.probe = i5000_init_one,
+	.remove = i5000_remove_one,
+	.id_table = i5000_pci_tbl,
+};
+
+/*
+ *	i5000_init		Module entry function
+ *			Try to initialize this module for its devices
+ */
+static int __init i5000_init(void)
+{
+	int pci_rc;
+
+	edac_dbg(2, "MC:\n");
+
+       /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+       opstate_init();
+
+	pci_rc = pci_register_driver(&i5000_driver);
+
+	return (pci_rc < 0) ? pci_rc : 0;
+}
+
+/*
+ *	i5000_exit()	Module exit function
+ *			Unregister the driver
+ */
+static void __exit i5000_exit(void)
+{
+	edac_dbg(2, "MC:\n");
+	pci_unregister_driver(&i5000_driver);
+}
+
+module_init(i5000_init);
+module_exit(i5000_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR
+    ("Linux Networx (http://lnxi.com) Doug Thompson <norsk5@xmission.com>");
+MODULE_DESCRIPTION("MC Driver for Intel I5000 memory controllers - "
+		I5000_REVISION);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
+module_param(misc_messages, int, 0444);
+MODULE_PARM_DESC(misc_messages, "Log miscellaneous non fatal messages");
+
diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c
new file mode 100644
index 000000000..858ef4e15
--- /dev/null
+++ b/drivers/edac/i5100_edac.c
@@ -0,0 +1,1241 @@
+/*
+ * Intel 5100 Memory Controllers kernel module
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * This module is based on the following document:
+ *
+ * Intel 5100X Chipset Memory Controller Hub (MCH) - Datasheet
+ *      http://download.intel.com/design/chipsets/datashts/318378.pdf
+ *
+ * The intel 5100 has two independent channels. EDAC core currently
+ * can not reflect this configuration so instead the chip-select
+ * rows for each respective channel are laid out one after another,
+ * the first half belonging to channel 0, the second half belonging
+ * to channel 1.
+ *
+ * This driver is for DDR2 DIMMs, and it uses chip select to select among the
+ * several ranks. However, instead of showing memories as ranks, it outputs
+ * them as DIMM's. An internal table creates the association between ranks
+ * and DIMM's.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/edac.h>
+#include <linux/delay.h>
+#include <linux/mmzone.h>
+#include <linux/debugfs.h>
+
+#include "edac_module.h"
+
+/* register addresses */
+
+/* device 16, func 1 */
+#define I5100_MC		0x40	/* Memory Control Register */
+#define 	I5100_MC_SCRBEN_MASK	(1 << 7)
+#define 	I5100_MC_SCRBDONE_MASK	(1 << 4)
+#define I5100_MS		0x44	/* Memory Status Register */
+#define I5100_SPDDATA		0x48	/* Serial Presence Detect Status Reg */
+#define I5100_SPDCMD		0x4c	/* Serial Presence Detect Command Reg */
+#define I5100_TOLM		0x6c	/* Top of Low Memory */
+#define I5100_MIR0		0x80	/* Memory Interleave Range 0 */
+#define I5100_MIR1		0x84	/* Memory Interleave Range 1 */
+#define I5100_AMIR_0		0x8c	/* Adjusted Memory Interleave Range 0 */
+#define I5100_AMIR_1		0x90	/* Adjusted Memory Interleave Range 1 */
+#define I5100_FERR_NF_MEM	0xa0	/* MC First Non Fatal Errors */
+#define		I5100_FERR_NF_MEM_M16ERR_MASK	(1 << 16)
+#define		I5100_FERR_NF_MEM_M15ERR_MASK	(1 << 15)
+#define		I5100_FERR_NF_MEM_M14ERR_MASK	(1 << 14)
+#define		I5100_FERR_NF_MEM_M12ERR_MASK	(1 << 12)
+#define		I5100_FERR_NF_MEM_M11ERR_MASK	(1 << 11)
+#define		I5100_FERR_NF_MEM_M10ERR_MASK	(1 << 10)
+#define		I5100_FERR_NF_MEM_M6ERR_MASK	(1 << 6)
+#define		I5100_FERR_NF_MEM_M5ERR_MASK	(1 << 5)
+#define		I5100_FERR_NF_MEM_M4ERR_MASK	(1 << 4)
+#define		I5100_FERR_NF_MEM_M1ERR_MASK	(1 << 1)
+#define		I5100_FERR_NF_MEM_ANY_MASK	\
+			(I5100_FERR_NF_MEM_M16ERR_MASK | \
+			I5100_FERR_NF_MEM_M15ERR_MASK | \
+			I5100_FERR_NF_MEM_M14ERR_MASK | \
+			I5100_FERR_NF_MEM_M12ERR_MASK | \
+			I5100_FERR_NF_MEM_M11ERR_MASK | \
+			I5100_FERR_NF_MEM_M10ERR_MASK | \
+			I5100_FERR_NF_MEM_M6ERR_MASK | \
+			I5100_FERR_NF_MEM_M5ERR_MASK | \
+			I5100_FERR_NF_MEM_M4ERR_MASK | \
+			I5100_FERR_NF_MEM_M1ERR_MASK)
+#define	I5100_NERR_NF_MEM	0xa4	/* MC Next Non-Fatal Errors */
+#define I5100_EMASK_MEM		0xa8	/* MC Error Mask Register */
+#define I5100_MEM0EINJMSK0	0x200	/* Injection Mask0 Register Channel 0 */
+#define I5100_MEM1EINJMSK0	0x208	/* Injection Mask0 Register Channel 1 */
+#define		I5100_MEMXEINJMSK0_EINJEN	(1 << 27)
+#define I5100_MEM0EINJMSK1	0x204	/* Injection Mask1 Register Channel 0 */
+#define I5100_MEM1EINJMSK1	0x206	/* Injection Mask1 Register Channel 1 */
+
+/* Device 19, Function 0 */
+#define I5100_DINJ0 0x9a
+
+/* device 21 and 22, func 0 */
+#define I5100_MTR_0	0x154	/* Memory Technology Registers 0-3 */
+#define I5100_DMIR	0x15c	/* DIMM Interleave Range */
+#define	I5100_VALIDLOG	0x18c	/* Valid Log Markers */
+#define	I5100_NRECMEMA	0x190	/* Non-Recoverable Memory Error Log Reg A */
+#define	I5100_NRECMEMB	0x194	/* Non-Recoverable Memory Error Log Reg B */
+#define	I5100_REDMEMA	0x198	/* Recoverable Memory Data Error Log Reg A */
+#define	I5100_REDMEMB	0x19c	/* Recoverable Memory Data Error Log Reg B */
+#define	I5100_RECMEMA	0x1a0	/* Recoverable Memory Error Log Reg A */
+#define	I5100_RECMEMB	0x1a4	/* Recoverable Memory Error Log Reg B */
+#define I5100_MTR_4	0x1b0	/* Memory Technology Registers 4,5 */
+
+/* bit field accessors */
+
+static inline u32 i5100_mc_scrben(u32 mc)
+{
+	return mc >> 7 & 1;
+}
+
+static inline u32 i5100_mc_errdeten(u32 mc)
+{
+	return mc >> 5 & 1;
+}
+
+static inline u32 i5100_mc_scrbdone(u32 mc)
+{
+	return mc >> 4 & 1;
+}
+
+static inline u16 i5100_spddata_rdo(u16 a)
+{
+	return a >> 15 & 1;
+}
+
+static inline u16 i5100_spddata_sbe(u16 a)
+{
+	return a >> 13 & 1;
+}
+
+static inline u16 i5100_spddata_busy(u16 a)
+{
+	return a >> 12 & 1;
+}
+
+static inline u16 i5100_spddata_data(u16 a)
+{
+	return a & ((1 << 8) - 1);
+}
+
+static inline u32 i5100_spdcmd_create(u32 dti, u32 ckovrd, u32 sa, u32 ba,
+				      u32 data, u32 cmd)
+{
+	return	((dti & ((1 << 4) - 1))  << 28) |
+		((ckovrd & 1)            << 27) |
+		((sa & ((1 << 3) - 1))   << 24) |
+		((ba & ((1 << 8) - 1))   << 16) |
+		((data & ((1 << 8) - 1)) <<  8) |
+		(cmd & 1);
+}
+
+static inline u16 i5100_tolm_tolm(u16 a)
+{
+	return a >> 12 & ((1 << 4) - 1);
+}
+
+static inline u16 i5100_mir_limit(u16 a)
+{
+	return a >> 4 & ((1 << 12) - 1);
+}
+
+static inline u16 i5100_mir_way1(u16 a)
+{
+	return a >> 1 & 1;
+}
+
+static inline u16 i5100_mir_way0(u16 a)
+{
+	return a & 1;
+}
+
+static inline u32 i5100_ferr_nf_mem_chan_indx(u32 a)
+{
+	return a >> 28 & 1;
+}
+
+static inline u32 i5100_ferr_nf_mem_any(u32 a)
+{
+	return a & I5100_FERR_NF_MEM_ANY_MASK;
+}
+
+static inline u32 i5100_nerr_nf_mem_any(u32 a)
+{
+	return i5100_ferr_nf_mem_any(a);
+}
+
+static inline u32 i5100_dmir_limit(u32 a)
+{
+	return a >> 16 & ((1 << 11) - 1);
+}
+
+static inline u32 i5100_dmir_rank(u32 a, u32 i)
+{
+	return a >> (4 * i) & ((1 << 2) - 1);
+}
+
+static inline u16 i5100_mtr_present(u16 a)
+{
+	return a >> 10 & 1;
+}
+
+static inline u16 i5100_mtr_ethrottle(u16 a)
+{
+	return a >> 9 & 1;
+}
+
+static inline u16 i5100_mtr_width(u16 a)
+{
+	return a >> 8 & 1;
+}
+
+static inline u16 i5100_mtr_numbank(u16 a)
+{
+	return a >> 6 & 1;
+}
+
+static inline u16 i5100_mtr_numrow(u16 a)
+{
+	return a >> 2 & ((1 << 2) - 1);
+}
+
+static inline u16 i5100_mtr_numcol(u16 a)
+{
+	return a & ((1 << 2) - 1);
+}
+
+
+static inline u32 i5100_validlog_redmemvalid(u32 a)
+{
+	return a >> 2 & 1;
+}
+
+static inline u32 i5100_validlog_recmemvalid(u32 a)
+{
+	return a >> 1 & 1;
+}
+
+static inline u32 i5100_validlog_nrecmemvalid(u32 a)
+{
+	return a & 1;
+}
+
+static inline u32 i5100_nrecmema_merr(u32 a)
+{
+	return a >> 15 & ((1 << 5) - 1);
+}
+
+static inline u32 i5100_nrecmema_bank(u32 a)
+{
+	return a >> 12 & ((1 << 3) - 1);
+}
+
+static inline u32 i5100_nrecmema_rank(u32 a)
+{
+	return a >>  8 & ((1 << 3) - 1);
+}
+
+static inline u32 i5100_nrecmema_dm_buf_id(u32 a)
+{
+	return a & ((1 << 8) - 1);
+}
+
+static inline u32 i5100_nrecmemb_cas(u32 a)
+{
+	return a >> 16 & ((1 << 13) - 1);
+}
+
+static inline u32 i5100_nrecmemb_ras(u32 a)
+{
+	return a & ((1 << 16) - 1);
+}
+
+static inline u32 i5100_redmemb_ecc_locator(u32 a)
+{
+	return a & ((1 << 18) - 1);
+}
+
+static inline u32 i5100_recmema_merr(u32 a)
+{
+	return i5100_nrecmema_merr(a);
+}
+
+static inline u32 i5100_recmema_bank(u32 a)
+{
+	return i5100_nrecmema_bank(a);
+}
+
+static inline u32 i5100_recmema_rank(u32 a)
+{
+	return i5100_nrecmema_rank(a);
+}
+
+static inline u32 i5100_recmemb_cas(u32 a)
+{
+	return i5100_nrecmemb_cas(a);
+}
+
+static inline u32 i5100_recmemb_ras(u32 a)
+{
+	return i5100_nrecmemb_ras(a);
+}
+
+/* some generic limits */
+#define I5100_MAX_RANKS_PER_CHAN	6
+#define I5100_CHANNELS			    2
+#define I5100_MAX_RANKS_PER_DIMM	4
+#define I5100_DIMM_ADDR_LINES		(6 - 3)	/* 64 bits / 8 bits per byte */
+#define I5100_MAX_DIMM_SLOTS_PER_CHAN	4
+#define I5100_MAX_RANK_INTERLEAVE	4
+#define I5100_MAX_DMIRS			5
+#define I5100_SCRUB_REFRESH_RATE	(5 * 60 * HZ)
+
+struct i5100_priv {
+	/* ranks on each dimm -- 0 maps to not present -- obtained via SPD */
+	int dimm_numrank[I5100_CHANNELS][I5100_MAX_DIMM_SLOTS_PER_CHAN];
+
+	/*
+	 * mainboard chip select map -- maps i5100 chip selects to
+	 * DIMM slot chip selects.  In the case of only 4 ranks per
+	 * channel, the mapping is fairly obvious but not unique.
+	 * we map -1 -> NC and assume both channels use the same
+	 * map...
+	 *
+	 */
+	int dimm_csmap[I5100_MAX_DIMM_SLOTS_PER_CHAN][I5100_MAX_RANKS_PER_DIMM];
+
+	/* memory interleave range */
+	struct {
+		u64	 limit;
+		unsigned way[2];
+	} mir[I5100_CHANNELS];
+
+	/* adjusted memory interleave range register */
+	unsigned amir[I5100_CHANNELS];
+
+	/* dimm interleave range */
+	struct {
+		unsigned rank[I5100_MAX_RANK_INTERLEAVE];
+		u64	 limit;
+	} dmir[I5100_CHANNELS][I5100_MAX_DMIRS];
+
+	/* memory technology registers... */
+	struct {
+		unsigned present;	/* 0 or 1 */
+		unsigned ethrottle;	/* 0 or 1 */
+		unsigned width;		/* 4 or 8 bits  */
+		unsigned numbank;	/* 2 or 3 lines */
+		unsigned numrow;	/* 13 .. 16 lines */
+		unsigned numcol;	/* 11 .. 12 lines */
+	} mtr[I5100_CHANNELS][I5100_MAX_RANKS_PER_CHAN];
+
+	u64 tolm;		/* top of low memory in bytes */
+	unsigned ranksperchan;	/* number of ranks per channel */
+
+	struct pci_dev *mc;	/* device 16 func 1 */
+	struct pci_dev *einj;	/* device 19 func 0 */
+	struct pci_dev *ch0mm;	/* device 21 func 0 */
+	struct pci_dev *ch1mm;	/* device 22 func 0 */
+
+	struct delayed_work i5100_scrubbing;
+	int scrub_enable;
+
+	/* Error injection */
+	u8 inject_channel;
+	u8 inject_hlinesel;
+	u8 inject_deviceptr1;
+	u8 inject_deviceptr2;
+	u16 inject_eccmask1;
+	u16 inject_eccmask2;
+
+	struct dentry *debugfs;
+};
+
+static struct dentry *i5100_debugfs;
+
+/* map a rank/chan to a slot number on the mainboard */
+static int i5100_rank_to_slot(const struct mem_ctl_info *mci,
+			      int chan, int rank)
+{
+	const struct i5100_priv *priv = mci->pvt_info;
+	int i;
+
+	for (i = 0; i < I5100_MAX_DIMM_SLOTS_PER_CHAN; i++) {
+		int j;
+		const int numrank = priv->dimm_numrank[chan][i];
+
+		for (j = 0; j < numrank; j++)
+			if (priv->dimm_csmap[i][j] == rank)
+				return i * 2 + chan;
+	}
+
+	return -1;
+}
+
+static const char *i5100_err_msg(unsigned err)
+{
+	static const char *merrs[] = {
+		"unknown", /* 0 */
+		"uncorrectable data ECC on replay", /* 1 */
+		"unknown", /* 2 */
+		"unknown", /* 3 */
+		"aliased uncorrectable demand data ECC", /* 4 */
+		"aliased uncorrectable spare-copy data ECC", /* 5 */
+		"aliased uncorrectable patrol data ECC", /* 6 */
+		"unknown", /* 7 */
+		"unknown", /* 8 */
+		"unknown", /* 9 */
+		"non-aliased uncorrectable demand data ECC", /* 10 */
+		"non-aliased uncorrectable spare-copy data ECC", /* 11 */
+		"non-aliased uncorrectable patrol data ECC", /* 12 */
+		"unknown", /* 13 */
+		"correctable demand data ECC", /* 14 */
+		"correctable spare-copy data ECC", /* 15 */
+		"correctable patrol data ECC", /* 16 */
+		"unknown", /* 17 */
+		"SPD protocol error", /* 18 */
+		"unknown", /* 19 */
+		"spare copy initiated", /* 20 */
+		"spare copy completed", /* 21 */
+	};
+	unsigned i;
+
+	for (i = 0; i < ARRAY_SIZE(merrs); i++)
+		if (1 << i & err)
+			return merrs[i];
+
+	return "none";
+}
+
+/* convert csrow index into a rank (per channel -- 0..5) */
+static int i5100_csrow_to_rank(const struct mem_ctl_info *mci, int csrow)
+{
+	const struct i5100_priv *priv = mci->pvt_info;
+
+	return csrow % priv->ranksperchan;
+}
+
+/* convert csrow index into a channel (0..1) */
+static int i5100_csrow_to_chan(const struct mem_ctl_info *mci, int csrow)
+{
+	const struct i5100_priv *priv = mci->pvt_info;
+
+	return csrow / priv->ranksperchan;
+}
+
+static void i5100_handle_ce(struct mem_ctl_info *mci,
+			    int chan,
+			    unsigned bank,
+			    unsigned rank,
+			    unsigned long syndrome,
+			    unsigned cas,
+			    unsigned ras,
+			    const char *msg)
+{
+	char detail[80];
+
+	/* Form out message */
+	snprintf(detail, sizeof(detail),
+		 "bank %u, cas %u, ras %u\n",
+		 bank, cas, ras);
+
+	edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+			     0, 0, syndrome,
+			     chan, rank, -1,
+			     msg, detail);
+}
+
+static void i5100_handle_ue(struct mem_ctl_info *mci,
+			    int chan,
+			    unsigned bank,
+			    unsigned rank,
+			    unsigned long syndrome,
+			    unsigned cas,
+			    unsigned ras,
+			    const char *msg)
+{
+	char detail[80];
+
+	/* Form out message */
+	snprintf(detail, sizeof(detail),
+		 "bank %u, cas %u, ras %u\n",
+		 bank, cas, ras);
+
+	edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+			     0, 0, syndrome,
+			     chan, rank, -1,
+			     msg, detail);
+}
+
+static void i5100_read_log(struct mem_ctl_info *mci, int chan,
+			   u32 ferr, u32 nerr)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	struct pci_dev *pdev = (chan) ? priv->ch1mm : priv->ch0mm;
+	u32 dw;
+	u32 dw2;
+	unsigned syndrome = 0;
+	unsigned ecc_loc = 0;
+	unsigned merr;
+	unsigned bank;
+	unsigned rank;
+	unsigned cas;
+	unsigned ras;
+
+	pci_read_config_dword(pdev, I5100_VALIDLOG, &dw);
+
+	if (i5100_validlog_redmemvalid(dw)) {
+		pci_read_config_dword(pdev, I5100_REDMEMA, &dw2);
+		syndrome = dw2;
+		pci_read_config_dword(pdev, I5100_REDMEMB, &dw2);
+		ecc_loc = i5100_redmemb_ecc_locator(dw2);
+	}
+
+	if (i5100_validlog_recmemvalid(dw)) {
+		const char *msg;
+
+		pci_read_config_dword(pdev, I5100_RECMEMA, &dw2);
+		merr = i5100_recmema_merr(dw2);
+		bank = i5100_recmema_bank(dw2);
+		rank = i5100_recmema_rank(dw2);
+
+		pci_read_config_dword(pdev, I5100_RECMEMB, &dw2);
+		cas = i5100_recmemb_cas(dw2);
+		ras = i5100_recmemb_ras(dw2);
+
+		/* FIXME:  not really sure if this is what merr is...
+		 */
+		if (!merr)
+			msg = i5100_err_msg(ferr);
+		else
+			msg = i5100_err_msg(nerr);
+
+		i5100_handle_ce(mci, chan, bank, rank, syndrome, cas, ras, msg);
+	}
+
+	if (i5100_validlog_nrecmemvalid(dw)) {
+		const char *msg;
+
+		pci_read_config_dword(pdev, I5100_NRECMEMA, &dw2);
+		merr = i5100_nrecmema_merr(dw2);
+		bank = i5100_nrecmema_bank(dw2);
+		rank = i5100_nrecmema_rank(dw2);
+
+		pci_read_config_dword(pdev, I5100_NRECMEMB, &dw2);
+		cas = i5100_nrecmemb_cas(dw2);
+		ras = i5100_nrecmemb_ras(dw2);
+
+		/* FIXME:  not really sure if this is what merr is...
+		 */
+		if (!merr)
+			msg = i5100_err_msg(ferr);
+		else
+			msg = i5100_err_msg(nerr);
+
+		i5100_handle_ue(mci, chan, bank, rank, syndrome, cas, ras, msg);
+	}
+
+	pci_write_config_dword(pdev, I5100_VALIDLOG, dw);
+}
+
+static void i5100_check_error(struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	u32 dw, dw2;
+
+	pci_read_config_dword(priv->mc, I5100_FERR_NF_MEM, &dw);
+	if (i5100_ferr_nf_mem_any(dw)) {
+
+		pci_read_config_dword(priv->mc, I5100_NERR_NF_MEM, &dw2);
+
+		i5100_read_log(mci, i5100_ferr_nf_mem_chan_indx(dw),
+			       i5100_ferr_nf_mem_any(dw),
+			       i5100_nerr_nf_mem_any(dw2));
+
+		pci_write_config_dword(priv->mc, I5100_NERR_NF_MEM, dw2);
+	}
+	pci_write_config_dword(priv->mc, I5100_FERR_NF_MEM, dw);
+}
+
+/* The i5100 chipset will scrub the entire memory once, then
+ * set a done bit. Continuous scrubbing is achieved by enqueing
+ * delayed work to a workqueue, checking every few minutes if
+ * the scrubbing has completed and if so reinitiating it.
+ */
+
+static void i5100_refresh_scrubbing(struct work_struct *work)
+{
+	struct delayed_work *i5100_scrubbing = to_delayed_work(work);
+	struct i5100_priv *priv = container_of(i5100_scrubbing,
+					       struct i5100_priv,
+					       i5100_scrubbing);
+	u32 dw;
+
+	pci_read_config_dword(priv->mc, I5100_MC, &dw);
+
+	if (priv->scrub_enable) {
+
+		pci_read_config_dword(priv->mc, I5100_MC, &dw);
+
+		if (i5100_mc_scrbdone(dw)) {
+			dw |= I5100_MC_SCRBEN_MASK;
+			pci_write_config_dword(priv->mc, I5100_MC, dw);
+			pci_read_config_dword(priv->mc, I5100_MC, &dw);
+		}
+
+		schedule_delayed_work(&(priv->i5100_scrubbing),
+				      I5100_SCRUB_REFRESH_RATE);
+	}
+}
+/*
+ * The bandwidth is based on experimentation, feel free to refine it.
+ */
+static int i5100_set_scrub_rate(struct mem_ctl_info *mci, u32 bandwidth)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	u32 dw;
+
+	pci_read_config_dword(priv->mc, I5100_MC, &dw);
+	if (bandwidth) {
+		priv->scrub_enable = 1;
+		dw |= I5100_MC_SCRBEN_MASK;
+		schedule_delayed_work(&(priv->i5100_scrubbing),
+				      I5100_SCRUB_REFRESH_RATE);
+	} else {
+		priv->scrub_enable = 0;
+		dw &= ~I5100_MC_SCRBEN_MASK;
+		cancel_delayed_work(&(priv->i5100_scrubbing));
+	}
+	pci_write_config_dword(priv->mc, I5100_MC, dw);
+
+	pci_read_config_dword(priv->mc, I5100_MC, &dw);
+
+	bandwidth = 5900000 * i5100_mc_scrben(dw);
+
+	return bandwidth;
+}
+
+static int i5100_get_scrub_rate(struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	u32 dw;
+
+	pci_read_config_dword(priv->mc, I5100_MC, &dw);
+
+	return 5900000 * i5100_mc_scrben(dw);
+}
+
+static struct pci_dev *pci_get_device_func(unsigned vendor,
+					   unsigned device,
+					   unsigned func)
+{
+	struct pci_dev *ret = NULL;
+
+	while (1) {
+		ret = pci_get_device(vendor, device, ret);
+
+		if (!ret)
+			break;
+
+		if (PCI_FUNC(ret->devfn) == func)
+			break;
+	}
+
+	return ret;
+}
+
+static unsigned long i5100_npages(struct mem_ctl_info *mci, int csrow)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	const unsigned chan_rank = i5100_csrow_to_rank(mci, csrow);
+	const unsigned chan = i5100_csrow_to_chan(mci, csrow);
+	unsigned addr_lines;
+
+	/* dimm present? */
+	if (!priv->mtr[chan][chan_rank].present)
+		return 0ULL;
+
+	addr_lines =
+		I5100_DIMM_ADDR_LINES +
+		priv->mtr[chan][chan_rank].numcol +
+		priv->mtr[chan][chan_rank].numrow +
+		priv->mtr[chan][chan_rank].numbank;
+
+	return (unsigned long)
+		((unsigned long long) (1ULL << addr_lines) / PAGE_SIZE);
+}
+
+static void i5100_init_mtr(struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	struct pci_dev *mms[2] = { priv->ch0mm, priv->ch1mm };
+	int i;
+
+	for (i = 0; i < I5100_CHANNELS; i++) {
+		int j;
+		struct pci_dev *pdev = mms[i];
+
+		for (j = 0; j < I5100_MAX_RANKS_PER_CHAN; j++) {
+			const unsigned addr =
+				(j < 4) ? I5100_MTR_0 + j * 2 :
+					  I5100_MTR_4 + (j - 4) * 2;
+			u16 w;
+
+			pci_read_config_word(pdev, addr, &w);
+
+			priv->mtr[i][j].present = i5100_mtr_present(w);
+			priv->mtr[i][j].ethrottle = i5100_mtr_ethrottle(w);
+			priv->mtr[i][j].width = 4 + 4 * i5100_mtr_width(w);
+			priv->mtr[i][j].numbank = 2 + i5100_mtr_numbank(w);
+			priv->mtr[i][j].numrow = 13 + i5100_mtr_numrow(w);
+			priv->mtr[i][j].numcol = 10 + i5100_mtr_numcol(w);
+		}
+	}
+}
+
+/*
+ * FIXME: make this into a real i2c adapter (so that dimm-decode
+ * will work)?
+ */
+static int i5100_read_spd_byte(const struct mem_ctl_info *mci,
+			       u8 ch, u8 slot, u8 addr, u8 *byte)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	u16 w;
+	unsigned long et;
+
+	pci_read_config_word(priv->mc, I5100_SPDDATA, &w);
+	if (i5100_spddata_busy(w))
+		return -1;
+
+	pci_write_config_dword(priv->mc, I5100_SPDCMD,
+			       i5100_spdcmd_create(0xa, 1, ch * 4 + slot, addr,
+						   0, 0));
+
+	/* wait up to 100ms */
+	et = jiffies + HZ / 10;
+	udelay(100);
+	while (1) {
+		pci_read_config_word(priv->mc, I5100_SPDDATA, &w);
+		if (!i5100_spddata_busy(w))
+			break;
+		udelay(100);
+	}
+
+	if (!i5100_spddata_rdo(w) || i5100_spddata_sbe(w))
+		return -1;
+
+	*byte = i5100_spddata_data(w);
+
+	return 0;
+}
+
+/*
+ * fill dimm chip select map
+ *
+ * FIXME:
+ *   o not the only way to may chip selects to dimm slots
+ *   o investigate if there is some way to obtain this map from the bios
+ */
+static void i5100_init_dimm_csmap(struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	int i;
+
+	for (i = 0; i < I5100_MAX_DIMM_SLOTS_PER_CHAN; i++) {
+		int j;
+
+		for (j = 0; j < I5100_MAX_RANKS_PER_DIMM; j++)
+			priv->dimm_csmap[i][j] = -1; /* default NC */
+	}
+
+	/* only 2 chip selects per slot... */
+	if (priv->ranksperchan == 4) {
+		priv->dimm_csmap[0][0] = 0;
+		priv->dimm_csmap[0][1] = 3;
+		priv->dimm_csmap[1][0] = 1;
+		priv->dimm_csmap[1][1] = 2;
+		priv->dimm_csmap[2][0] = 2;
+		priv->dimm_csmap[3][0] = 3;
+	} else {
+		priv->dimm_csmap[0][0] = 0;
+		priv->dimm_csmap[0][1] = 1;
+		priv->dimm_csmap[1][0] = 2;
+		priv->dimm_csmap[1][1] = 3;
+		priv->dimm_csmap[2][0] = 4;
+		priv->dimm_csmap[2][1] = 5;
+	}
+}
+
+static void i5100_init_dimm_layout(struct pci_dev *pdev,
+				   struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	int i;
+
+	for (i = 0; i < I5100_CHANNELS; i++) {
+		int j;
+
+		for (j = 0; j < I5100_MAX_DIMM_SLOTS_PER_CHAN; j++) {
+			u8 rank;
+
+			if (i5100_read_spd_byte(mci, i, j, 5, &rank) < 0)
+				priv->dimm_numrank[i][j] = 0;
+			else
+				priv->dimm_numrank[i][j] = (rank & 3) + 1;
+		}
+	}
+
+	i5100_init_dimm_csmap(mci);
+}
+
+static void i5100_init_interleaving(struct pci_dev *pdev,
+				    struct mem_ctl_info *mci)
+{
+	u16 w;
+	u32 dw;
+	struct i5100_priv *priv = mci->pvt_info;
+	struct pci_dev *mms[2] = { priv->ch0mm, priv->ch1mm };
+	int i;
+
+	pci_read_config_word(pdev, I5100_TOLM, &w);
+	priv->tolm = (u64) i5100_tolm_tolm(w) * 256 * 1024 * 1024;
+
+	pci_read_config_word(pdev, I5100_MIR0, &w);
+	priv->mir[0].limit = (u64) i5100_mir_limit(w) << 28;
+	priv->mir[0].way[1] = i5100_mir_way1(w);
+	priv->mir[0].way[0] = i5100_mir_way0(w);
+
+	pci_read_config_word(pdev, I5100_MIR1, &w);
+	priv->mir[1].limit = (u64) i5100_mir_limit(w) << 28;
+	priv->mir[1].way[1] = i5100_mir_way1(w);
+	priv->mir[1].way[0] = i5100_mir_way0(w);
+
+	pci_read_config_word(pdev, I5100_AMIR_0, &w);
+	priv->amir[0] = w;
+	pci_read_config_word(pdev, I5100_AMIR_1, &w);
+	priv->amir[1] = w;
+
+	for (i = 0; i < I5100_CHANNELS; i++) {
+		int j;
+
+		for (j = 0; j < 5; j++) {
+			int k;
+
+			pci_read_config_dword(mms[i], I5100_DMIR + j * 4, &dw);
+
+			priv->dmir[i][j].limit =
+				(u64) i5100_dmir_limit(dw) << 28;
+			for (k = 0; k < I5100_MAX_RANKS_PER_DIMM; k++)
+				priv->dmir[i][j].rank[k] =
+					i5100_dmir_rank(dw, k);
+		}
+	}
+
+	i5100_init_mtr(mci);
+}
+
+static void i5100_init_csrows(struct mem_ctl_info *mci)
+{
+	int i;
+	struct i5100_priv *priv = mci->pvt_info;
+
+	for (i = 0; i < mci->tot_dimms; i++) {
+		struct dimm_info *dimm;
+		const unsigned long npages = i5100_npages(mci, i);
+		const unsigned chan = i5100_csrow_to_chan(mci, i);
+		const unsigned rank = i5100_csrow_to_rank(mci, i);
+
+		if (!npages)
+			continue;
+
+		dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers,
+			       chan, rank, 0);
+
+		dimm->nr_pages = npages;
+		dimm->grain = 32;
+		dimm->dtype = (priv->mtr[chan][rank].width == 4) ?
+				DEV_X4 : DEV_X8;
+		dimm->mtype = MEM_RDDR2;
+		dimm->edac_mode = EDAC_SECDED;
+		snprintf(dimm->label, sizeof(dimm->label), "DIMM%u",
+			 i5100_rank_to_slot(mci, chan, rank));
+
+		edac_dbg(2, "dimm channel %d, rank %d, size %ld\n",
+			 chan, rank, (long)PAGES_TO_MiB(npages));
+	}
+}
+
+/****************************************************************************
+ *                       Error injection routines
+ ****************************************************************************/
+
+static void i5100_do_inject(struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	u32 mask0;
+	u16 mask1;
+
+	/* MEM[1:0]EINJMSK0
+	 * 31    - ADDRMATCHEN
+	 * 29:28 - HLINESEL
+	 *         00 Reserved
+	 *         01 Lower half of cache line
+	 *         10 Upper half of cache line
+	 *         11 Both upper and lower parts of cache line
+	 * 27    - EINJEN
+	 * 25:19 - XORMASK1 for deviceptr1
+	 * 9:5   - SEC2RAM for deviceptr2
+	 * 4:0   - FIR2RAM for deviceptr1
+	 */
+	mask0 = ((priv->inject_hlinesel & 0x3) << 28) |
+		I5100_MEMXEINJMSK0_EINJEN |
+		((priv->inject_eccmask1 & 0xffff) << 10) |
+		((priv->inject_deviceptr2 & 0x1f) << 5) |
+		(priv->inject_deviceptr1 & 0x1f);
+
+	/* MEM[1:0]EINJMSK1
+	 * 15:0  - XORMASK2 for deviceptr2
+	 */
+	mask1 = priv->inject_eccmask2;
+
+	if (priv->inject_channel == 0) {
+		pci_write_config_dword(priv->mc, I5100_MEM0EINJMSK0, mask0);
+		pci_write_config_word(priv->mc, I5100_MEM0EINJMSK1, mask1);
+	} else {
+		pci_write_config_dword(priv->mc, I5100_MEM1EINJMSK0, mask0);
+		pci_write_config_word(priv->mc, I5100_MEM1EINJMSK1, mask1);
+	}
+
+	/* Error Injection Response Function
+	 * Intel 5100 Memory Controller Hub Chipset (318378) datasheet
+	 * hints about this register but carry no data about them. All
+	 * data regarding device 19 is based on experimentation and the
+	 * Intel 7300 Chipset Memory Controller Hub (318082) datasheet
+	 * which appears to be accurate for the i5100 in this area.
+	 *
+	 * The injection code don't work without setting this register.
+	 * The register needs to be flipped off then on else the hardware
+	 * will only preform the first injection.
+	 *
+	 * Stop condition bits 7:4
+	 * 1010 - Stop after one injection
+	 * 1011 - Never stop injecting faults
+	 *
+	 * Start condition bits 3:0
+	 * 1010 - Never start
+	 * 1011 - Start immediately
+	 */
+	pci_write_config_byte(priv->einj, I5100_DINJ0, 0xaa);
+	pci_write_config_byte(priv->einj, I5100_DINJ0, 0xab);
+}
+
+#define to_mci(k) container_of(k, struct mem_ctl_info, dev)
+static ssize_t inject_enable_write(struct file *file, const char __user *data,
+		size_t count, loff_t *ppos)
+{
+	struct device *dev = file->private_data;
+	struct mem_ctl_info *mci = to_mci(dev);
+
+	i5100_do_inject(mci);
+
+	return count;
+}
+
+static const struct file_operations i5100_inject_enable_fops = {
+	.open = simple_open,
+	.write = inject_enable_write,
+	.llseek = generic_file_llseek,
+};
+
+static int i5100_setup_debugfs(struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+
+	if (!i5100_debugfs)
+		return -ENODEV;
+
+	priv->debugfs = edac_debugfs_create_dir_at(mci->bus->name, i5100_debugfs);
+
+	if (!priv->debugfs)
+		return -ENOMEM;
+
+	edac_debugfs_create_x8("inject_channel", S_IRUGO | S_IWUSR, priv->debugfs,
+				&priv->inject_channel);
+	edac_debugfs_create_x8("inject_hlinesel", S_IRUGO | S_IWUSR, priv->debugfs,
+				&priv->inject_hlinesel);
+	edac_debugfs_create_x8("inject_deviceptr1", S_IRUGO | S_IWUSR, priv->debugfs,
+				&priv->inject_deviceptr1);
+	edac_debugfs_create_x8("inject_deviceptr2", S_IRUGO | S_IWUSR, priv->debugfs,
+				&priv->inject_deviceptr2);
+	edac_debugfs_create_x16("inject_eccmask1", S_IRUGO | S_IWUSR, priv->debugfs,
+				&priv->inject_eccmask1);
+	edac_debugfs_create_x16("inject_eccmask2", S_IRUGO | S_IWUSR, priv->debugfs,
+				&priv->inject_eccmask2);
+	edac_debugfs_create_file("inject_enable", S_IWUSR, priv->debugfs,
+				&mci->dev, &i5100_inject_enable_fops);
+
+	return 0;
+
+}
+
+static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	int rc;
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[2];
+	struct i5100_priv *priv;
+	struct pci_dev *ch0mm, *ch1mm, *einj;
+	int ret = 0;
+	u32 dw;
+	int ranksperch;
+
+	if (PCI_FUNC(pdev->devfn) != 1)
+		return -ENODEV;
+
+	rc = pci_enable_device(pdev);
+	if (rc < 0) {
+		ret = rc;
+		goto bail;
+	}
+
+	/* ECC enabled? */
+	pci_read_config_dword(pdev, I5100_MC, &dw);
+	if (!i5100_mc_errdeten(dw)) {
+		printk(KERN_INFO "i5100_edac: ECC not enabled.\n");
+		ret = -ENODEV;
+		goto bail_pdev;
+	}
+
+	/* figure out how many ranks, from strapped state of 48GB_Mode input */
+	pci_read_config_dword(pdev, I5100_MS, &dw);
+	ranksperch = !!(dw & (1 << 8)) * 2 + 4;
+
+	/* enable error reporting... */
+	pci_read_config_dword(pdev, I5100_EMASK_MEM, &dw);
+	dw &= ~I5100_FERR_NF_MEM_ANY_MASK;
+	pci_write_config_dword(pdev, I5100_EMASK_MEM, dw);
+
+	/* device 21, func 0, Channel 0 Memory Map, Error Flag/Mask, etc... */
+	ch0mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
+				    PCI_DEVICE_ID_INTEL_5100_21, 0);
+	if (!ch0mm) {
+		ret = -ENODEV;
+		goto bail_pdev;
+	}
+
+	rc = pci_enable_device(ch0mm);
+	if (rc < 0) {
+		ret = rc;
+		goto bail_ch0;
+	}
+
+	/* device 22, func 0, Channel 1 Memory Map, Error Flag/Mask, etc... */
+	ch1mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
+				    PCI_DEVICE_ID_INTEL_5100_22, 0);
+	if (!ch1mm) {
+		ret = -ENODEV;
+		goto bail_disable_ch0;
+	}
+
+	rc = pci_enable_device(ch1mm);
+	if (rc < 0) {
+		ret = rc;
+		goto bail_ch1;
+	}
+
+	layers[0].type = EDAC_MC_LAYER_CHANNEL;
+	layers[0].size = 2;
+	layers[0].is_virt_csrow = false;
+	layers[1].type = EDAC_MC_LAYER_SLOT;
+	layers[1].size = ranksperch;
+	layers[1].is_virt_csrow = true;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
+			    sizeof(*priv));
+	if (!mci) {
+		ret = -ENOMEM;
+		goto bail_disable_ch1;
+	}
+
+
+	/* device 19, func 0, Error injection */
+	einj = pci_get_device_func(PCI_VENDOR_ID_INTEL,
+				    PCI_DEVICE_ID_INTEL_5100_19, 0);
+	if (!einj) {
+		ret = -ENODEV;
+		goto bail_mc_free;
+	}
+
+	rc = pci_enable_device(einj);
+	if (rc < 0) {
+		ret = rc;
+		goto bail_einj;
+	}
+
+	mci->pdev = &pdev->dev;
+
+	priv = mci->pvt_info;
+	priv->ranksperchan = ranksperch;
+	priv->mc = pdev;
+	priv->ch0mm = ch0mm;
+	priv->ch1mm = ch1mm;
+	priv->einj = einj;
+
+	INIT_DELAYED_WORK(&(priv->i5100_scrubbing), i5100_refresh_scrubbing);
+
+	/* If scrubbing was already enabled by the bios, start maintaining it */
+	pci_read_config_dword(pdev, I5100_MC, &dw);
+	if (i5100_mc_scrben(dw)) {
+		priv->scrub_enable = 1;
+		schedule_delayed_work(&(priv->i5100_scrubbing),
+				      I5100_SCRUB_REFRESH_RATE);
+	}
+
+	i5100_init_dimm_layout(pdev, mci);
+	i5100_init_interleaving(pdev, mci);
+
+	mci->mtype_cap = MEM_FLAG_FB_DDR2;
+	mci->edac_ctl_cap = EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->mod_name = "i5100_edac.c";
+	mci->ctl_name = "i5100";
+	mci->dev_name = pci_name(pdev);
+	mci->ctl_page_to_phys = NULL;
+
+	mci->edac_check = i5100_check_error;
+	mci->set_sdram_scrub_rate = i5100_set_scrub_rate;
+	mci->get_sdram_scrub_rate = i5100_get_scrub_rate;
+
+	priv->inject_channel = 0;
+	priv->inject_hlinesel = 0;
+	priv->inject_deviceptr1 = 0;
+	priv->inject_deviceptr2 = 0;
+	priv->inject_eccmask1 = 0;
+	priv->inject_eccmask2 = 0;
+
+	i5100_init_csrows(mci);
+
+	/* this strange construction seems to be in every driver, dunno why */
+	switch (edac_op_state) {
+	case EDAC_OPSTATE_POLL:
+	case EDAC_OPSTATE_NMI:
+		break;
+	default:
+		edac_op_state = EDAC_OPSTATE_POLL;
+		break;
+	}
+
+	if (edac_mc_add_mc(mci)) {
+		ret = -ENODEV;
+		goto bail_scrub;
+	}
+
+	i5100_setup_debugfs(mci);
+
+	return ret;
+
+bail_scrub:
+	priv->scrub_enable = 0;
+	cancel_delayed_work_sync(&(priv->i5100_scrubbing));
+	pci_disable_device(einj);
+
+bail_einj:
+	pci_dev_put(einj);
+
+bail_mc_free:
+	edac_mc_free(mci);
+
+bail_disable_ch1:
+	pci_disable_device(ch1mm);
+
+bail_ch1:
+	pci_dev_put(ch1mm);
+
+bail_disable_ch0:
+	pci_disable_device(ch0mm);
+
+bail_ch0:
+	pci_dev_put(ch0mm);
+
+bail_pdev:
+	pci_disable_device(pdev);
+
+bail:
+	return ret;
+}
+
+static void i5100_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+	struct i5100_priv *priv;
+
+	mci = edac_mc_del_mc(&pdev->dev);
+
+	if (!mci)
+		return;
+
+	priv = mci->pvt_info;
+
+	edac_debugfs_remove_recursive(priv->debugfs);
+
+	priv->scrub_enable = 0;
+	cancel_delayed_work_sync(&(priv->i5100_scrubbing));
+
+	pci_disable_device(pdev);
+	pci_disable_device(priv->ch0mm);
+	pci_disable_device(priv->ch1mm);
+	pci_disable_device(priv->einj);
+	pci_dev_put(priv->ch0mm);
+	pci_dev_put(priv->ch1mm);
+	pci_dev_put(priv->einj);
+
+	edac_mc_free(mci);
+}
+
+static const struct pci_device_id i5100_pci_tbl[] = {
+	/* Device 16, Function 0, Channel 0 Memory Map, Error Flag/Mask, ... */
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5100_16) },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, i5100_pci_tbl);
+
+static struct pci_driver i5100_driver = {
+	.name = KBUILD_BASENAME,
+	.probe = i5100_init_one,
+	.remove = i5100_remove_one,
+	.id_table = i5100_pci_tbl,
+};
+
+static int __init i5100_init(void)
+{
+	int pci_rc;
+
+	i5100_debugfs = edac_debugfs_create_dir_at("i5100_edac", NULL);
+
+	pci_rc = pci_register_driver(&i5100_driver);
+	return (pci_rc < 0) ? pci_rc : 0;
+}
+
+static void __exit i5100_exit(void)
+{
+	edac_debugfs_remove(i5100_debugfs);
+
+	pci_unregister_driver(&i5100_driver);
+}
+
+module_init(i5100_init);
+module_exit(i5100_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR
+    ("Arthur Jones <ajones@riverbed.com>");
+MODULE_DESCRIPTION("MC Driver for Intel I5100 memory controllers");
diff --git a/drivers/edac/i5400_edac.c b/drivers/edac/i5400_edac.c
new file mode 100644
index 000000000..6f8bcdb92
--- /dev/null
+++ b/drivers/edac/i5400_edac.c
@@ -0,0 +1,1478 @@
+/*
+ * Intel 5400 class Memory Controllers kernel module (Seaburg)
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Copyright (c) 2008 by:
+ *	 Ben Woodard <woodard@redhat.com>
+ *	 Mauro Carvalho Chehab
+ *
+ * Red Hat Inc. http://www.redhat.com
+ *
+ * Forked and adapted from the i5000_edac driver which was
+ * written by Douglas Thompson Linux Networx <norsk5@xmission.com>
+ *
+ * This module is based on the following document:
+ *
+ * Intel 5400 Chipset Memory Controller Hub (MCH) - Datasheet
+ * 	http://developer.intel.com/design/chipsets/datashts/313070.htm
+ *
+ * This Memory Controller manages DDR2 FB-DIMMs. It has 2 branches, each with
+ * 2 channels operating in lockstep no-mirror mode. Each channel can have up to
+ * 4 dimm's, each with up to 8GB.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/edac.h>
+#include <linux/mmzone.h>
+
+#include "edac_module.h"
+
+/*
+ * Alter this version for the I5400 module when modifications are made
+ */
+#define I5400_REVISION    " Ver: 1.0.0"
+
+#define EDAC_MOD_STR      "i5400_edac"
+
+#define i5400_printk(level, fmt, arg...) \
+	edac_printk(level, "i5400", fmt, ##arg)
+
+#define i5400_mc_printk(mci, level, fmt, arg...) \
+	edac_mc_chipset_printk(mci, level, "i5400", fmt, ##arg)
+
+/* Limits for i5400 */
+#define MAX_BRANCHES		2
+#define CHANNELS_PER_BRANCH	2
+#define DIMMS_PER_CHANNEL	4
+#define	MAX_CHANNELS		(MAX_BRANCHES * CHANNELS_PER_BRANCH)
+
+/* Device 16,
+ * Function 0: System Address
+ * Function 1: Memory Branch Map, Control, Errors Register
+ * Function 2: FSB Error Registers
+ *
+ * All 3 functions of Device 16 (0,1,2) share the SAME DID and
+ * uses PCI_DEVICE_ID_INTEL_5400_ERR for device 16 (0,1,2),
+ * PCI_DEVICE_ID_INTEL_5400_FBD0 and PCI_DEVICE_ID_INTEL_5400_FBD1
+ * for device 21 (0,1).
+ */
+
+	/* OFFSETS for Function 0 */
+#define		AMBASE			0x48 /* AMB Mem Mapped Reg Region Base */
+#define		MAXCH			0x56 /* Max Channel Number */
+#define		MAXDIMMPERCH		0x57 /* Max DIMM PER Channel Number */
+
+	/* OFFSETS for Function 1 */
+#define		TOLM			0x6C
+#define		REDMEMB			0x7C
+#define			REC_ECC_LOCATOR_ODD(x)	((x) & 0x3fe00) /* bits [17:9] indicate ODD, [8:0]  indicate EVEN */
+#define		MIR0			0x80
+#define		MIR1			0x84
+#define		AMIR0			0x8c
+#define		AMIR1			0x90
+
+	/* Fatal error registers */
+#define		FERR_FAT_FBD		0x98	/* also called as FERR_FAT_FB_DIMM at datasheet */
+#define			FERR_FAT_FBDCHAN (3<<28)	/* channel index where the highest-order error occurred */
+
+#define		NERR_FAT_FBD		0x9c
+#define		FERR_NF_FBD		0xa0	/* also called as FERR_NFAT_FB_DIMM at datasheet */
+
+	/* Non-fatal error register */
+#define		NERR_NF_FBD		0xa4
+
+	/* Enable error mask */
+#define		EMASK_FBD		0xa8
+
+#define		ERR0_FBD		0xac
+#define		ERR1_FBD		0xb0
+#define		ERR2_FBD		0xb4
+#define		MCERR_FBD		0xb8
+
+	/* No OFFSETS for Device 16 Function 2 */
+
+/*
+ * Device 21,
+ * Function 0: Memory Map Branch 0
+ *
+ * Device 22,
+ * Function 0: Memory Map Branch 1
+ */
+
+	/* OFFSETS for Function 0 */
+#define AMBPRESENT_0	0x64
+#define AMBPRESENT_1	0x66
+#define MTR0		0x80
+#define MTR1		0x82
+#define MTR2		0x84
+#define MTR3		0x86
+
+	/* OFFSETS for Function 1 */
+#define NRECFGLOG		0x74
+#define RECFGLOG		0x78
+#define NRECMEMA		0xbe
+#define NRECMEMB		0xc0
+#define NRECFB_DIMMA		0xc4
+#define NRECFB_DIMMB		0xc8
+#define NRECFB_DIMMC		0xcc
+#define NRECFB_DIMMD		0xd0
+#define NRECFB_DIMME		0xd4
+#define NRECFB_DIMMF		0xd8
+#define REDMEMA			0xdC
+#define RECMEMA			0xf0
+#define RECMEMB			0xf4
+#define RECFB_DIMMA		0xf8
+#define RECFB_DIMMB		0xec
+#define RECFB_DIMMC		0xf0
+#define RECFB_DIMMD		0xf4
+#define RECFB_DIMME		0xf8
+#define RECFB_DIMMF		0xfC
+
+/*
+ * Error indicator bits and masks
+ * Error masks are according with Table 5-17 of i5400 datasheet
+ */
+
+enum error_mask {
+	EMASK_M1  = 1<<0,  /* Memory Write error on non-redundant retry */
+	EMASK_M2  = 1<<1,  /* Memory or FB-DIMM configuration CRC read error */
+	EMASK_M3  = 1<<2,  /* Reserved */
+	EMASK_M4  = 1<<3,  /* Uncorrectable Data ECC on Replay */
+	EMASK_M5  = 1<<4,  /* Aliased Uncorrectable Non-Mirrored Demand Data ECC */
+	EMASK_M6  = 1<<5,  /* Unsupported on i5400 */
+	EMASK_M7  = 1<<6,  /* Aliased Uncorrectable Resilver- or Spare-Copy Data ECC */
+	EMASK_M8  = 1<<7,  /* Aliased Uncorrectable Patrol Data ECC */
+	EMASK_M9  = 1<<8,  /* Non-Aliased Uncorrectable Non-Mirrored Demand Data ECC */
+	EMASK_M10 = 1<<9,  /* Unsupported on i5400 */
+	EMASK_M11 = 1<<10, /* Non-Aliased Uncorrectable Resilver- or Spare-Copy Data ECC  */
+	EMASK_M12 = 1<<11, /* Non-Aliased Uncorrectable Patrol Data ECC */
+	EMASK_M13 = 1<<12, /* Memory Write error on first attempt */
+	EMASK_M14 = 1<<13, /* FB-DIMM Configuration Write error on first attempt */
+	EMASK_M15 = 1<<14, /* Memory or FB-DIMM configuration CRC read error */
+	EMASK_M16 = 1<<15, /* Channel Failed-Over Occurred */
+	EMASK_M17 = 1<<16, /* Correctable Non-Mirrored Demand Data ECC */
+	EMASK_M18 = 1<<17, /* Unsupported on i5400 */
+	EMASK_M19 = 1<<18, /* Correctable Resilver- or Spare-Copy Data ECC */
+	EMASK_M20 = 1<<19, /* Correctable Patrol Data ECC */
+	EMASK_M21 = 1<<20, /* FB-DIMM Northbound parity error on FB-DIMM Sync Status */
+	EMASK_M22 = 1<<21, /* SPD protocol Error */
+	EMASK_M23 = 1<<22, /* Non-Redundant Fast Reset Timeout */
+	EMASK_M24 = 1<<23, /* Refresh error */
+	EMASK_M25 = 1<<24, /* Memory Write error on redundant retry */
+	EMASK_M26 = 1<<25, /* Redundant Fast Reset Timeout */
+	EMASK_M27 = 1<<26, /* Correctable Counter Threshold Exceeded */
+	EMASK_M28 = 1<<27, /* DIMM-Spare Copy Completed */
+	EMASK_M29 = 1<<28, /* DIMM-Isolation Completed */
+};
+
+/*
+ * Names to translate bit error into something useful
+ */
+static const char *error_name[] = {
+	[0]  = "Memory Write error on non-redundant retry",
+	[1]  = "Memory or FB-DIMM configuration CRC read error",
+	/* Reserved */
+	[3]  = "Uncorrectable Data ECC on Replay",
+	[4]  = "Aliased Uncorrectable Non-Mirrored Demand Data ECC",
+	/* M6 Unsupported on i5400 */
+	[6]  = "Aliased Uncorrectable Resilver- or Spare-Copy Data ECC",
+	[7]  = "Aliased Uncorrectable Patrol Data ECC",
+	[8]  = "Non-Aliased Uncorrectable Non-Mirrored Demand Data ECC",
+	/* M10 Unsupported on i5400 */
+	[10] = "Non-Aliased Uncorrectable Resilver- or Spare-Copy Data ECC",
+	[11] = "Non-Aliased Uncorrectable Patrol Data ECC",
+	[12] = "Memory Write error on first attempt",
+	[13] = "FB-DIMM Configuration Write error on first attempt",
+	[14] = "Memory or FB-DIMM configuration CRC read error",
+	[15] = "Channel Failed-Over Occurred",
+	[16] = "Correctable Non-Mirrored Demand Data ECC",
+	/* M18 Unsupported on i5400 */
+	[18] = "Correctable Resilver- or Spare-Copy Data ECC",
+	[19] = "Correctable Patrol Data ECC",
+	[20] = "FB-DIMM Northbound parity error on FB-DIMM Sync Status",
+	[21] = "SPD protocol Error",
+	[22] = "Non-Redundant Fast Reset Timeout",
+	[23] = "Refresh error",
+	[24] = "Memory Write error on redundant retry",
+	[25] = "Redundant Fast Reset Timeout",
+	[26] = "Correctable Counter Threshold Exceeded",
+	[27] = "DIMM-Spare Copy Completed",
+	[28] = "DIMM-Isolation Completed",
+};
+
+/* Fatal errors */
+#define ERROR_FAT_MASK		(EMASK_M1 | \
+				 EMASK_M2 | \
+				 EMASK_M23)
+
+/* Correctable errors */
+#define ERROR_NF_CORRECTABLE	(EMASK_M27 | \
+				 EMASK_M20 | \
+				 EMASK_M19 | \
+				 EMASK_M18 | \
+				 EMASK_M17 | \
+				 EMASK_M16)
+#define ERROR_NF_DIMM_SPARE	(EMASK_M29 | \
+				 EMASK_M28)
+#define ERROR_NF_SPD_PROTOCOL	(EMASK_M22)
+#define ERROR_NF_NORTH_CRC	(EMASK_M21)
+
+/* Recoverable errors */
+#define ERROR_NF_RECOVERABLE	(EMASK_M26 | \
+				 EMASK_M25 | \
+				 EMASK_M24 | \
+				 EMASK_M15 | \
+				 EMASK_M14 | \
+				 EMASK_M13 | \
+				 EMASK_M12 | \
+				 EMASK_M11 | \
+				 EMASK_M9  | \
+				 EMASK_M8  | \
+				 EMASK_M7  | \
+				 EMASK_M5)
+
+/* uncorrectable errors */
+#define ERROR_NF_UNCORRECTABLE	(EMASK_M4)
+
+/* mask to all non-fatal errors */
+#define ERROR_NF_MASK		(ERROR_NF_CORRECTABLE   | \
+				 ERROR_NF_UNCORRECTABLE | \
+				 ERROR_NF_RECOVERABLE   | \
+				 ERROR_NF_DIMM_SPARE    | \
+				 ERROR_NF_SPD_PROTOCOL  | \
+				 ERROR_NF_NORTH_CRC)
+
+/*
+ * Define error masks for the several registers
+ */
+
+/* Enable all fatal and non fatal errors */
+#define ENABLE_EMASK_ALL	(ERROR_FAT_MASK | ERROR_NF_MASK)
+
+/* mask for fatal error registers */
+#define FERR_FAT_MASK ERROR_FAT_MASK
+
+/* masks for non-fatal error register */
+static inline int to_nf_mask(unsigned int mask)
+{
+	return (mask & EMASK_M29) | (mask >> 3);
+};
+
+static inline int from_nf_ferr(unsigned int mask)
+{
+	return (mask & EMASK_M29) |		/* Bit 28 */
+	       (mask & ((1 << 28) - 1) << 3);	/* Bits 0 to 27 */
+};
+
+#define FERR_NF_MASK		to_nf_mask(ERROR_NF_MASK)
+#define FERR_NF_CORRECTABLE	to_nf_mask(ERROR_NF_CORRECTABLE)
+#define FERR_NF_DIMM_SPARE	to_nf_mask(ERROR_NF_DIMM_SPARE)
+#define FERR_NF_SPD_PROTOCOL	to_nf_mask(ERROR_NF_SPD_PROTOCOL)
+#define FERR_NF_NORTH_CRC	to_nf_mask(ERROR_NF_NORTH_CRC)
+#define FERR_NF_RECOVERABLE	to_nf_mask(ERROR_NF_RECOVERABLE)
+#define FERR_NF_UNCORRECTABLE	to_nf_mask(ERROR_NF_UNCORRECTABLE)
+
+/* Defines to extract the vaious fields from the
+ *	MTRx - Memory Technology Registers
+ */
+#define MTR_DIMMS_PRESENT(mtr)		((mtr) & (1 << 10))
+#define MTR_DIMMS_ETHROTTLE(mtr)	((mtr) & (1 << 9))
+#define MTR_DRAM_WIDTH(mtr)		(((mtr) & (1 << 8)) ? 8 : 4)
+#define MTR_DRAM_BANKS(mtr)		(((mtr) & (1 << 6)) ? 8 : 4)
+#define MTR_DRAM_BANKS_ADDR_BITS(mtr)	((MTR_DRAM_BANKS(mtr) == 8) ? 3 : 2)
+#define MTR_DIMM_RANK(mtr)		(((mtr) >> 5) & 0x1)
+#define MTR_DIMM_RANK_ADDR_BITS(mtr)	(MTR_DIMM_RANK(mtr) ? 2 : 1)
+#define MTR_DIMM_ROWS(mtr)		(((mtr) >> 2) & 0x3)
+#define MTR_DIMM_ROWS_ADDR_BITS(mtr)	(MTR_DIMM_ROWS(mtr) + 13)
+#define MTR_DIMM_COLS(mtr)		((mtr) & 0x3)
+#define MTR_DIMM_COLS_ADDR_BITS(mtr)	(MTR_DIMM_COLS(mtr) + 10)
+
+/* This applies to FERR_NF_FB-DIMM as well as FERR_FAT_FB-DIMM */
+static inline int extract_fbdchan_indx(u32 x)
+{
+	return (x>>28) & 0x3;
+}
+
+/* Device name and register DID (Device ID) */
+struct i5400_dev_info {
+	const char *ctl_name;	/* name for this device */
+	u16 fsb_mapping_errors;	/* DID for the branchmap,control */
+};
+
+/* Table of devices attributes supported by this driver */
+static const struct i5400_dev_info i5400_devs[] = {
+	{
+		.ctl_name = "I5400",
+		.fsb_mapping_errors = PCI_DEVICE_ID_INTEL_5400_ERR,
+	},
+};
+
+struct i5400_dimm_info {
+	int megabytes;		/* size, 0 means not present  */
+};
+
+/* driver private data structure */
+struct i5400_pvt {
+	struct pci_dev *system_address;		/* 16.0 */
+	struct pci_dev *branchmap_werrors;	/* 16.1 */
+	struct pci_dev *fsb_error_regs;		/* 16.2 */
+	struct pci_dev *branch_0;		/* 21.0 */
+	struct pci_dev *branch_1;		/* 22.0 */
+
+	u16 tolm;				/* top of low memory */
+	union {
+		u64 ambase;				/* AMB BAR */
+		struct {
+			u32 ambase_bottom;
+			u32 ambase_top;
+		} u __packed;
+	};
+
+	u16 mir0, mir1;
+
+	u16 b0_mtr[DIMMS_PER_CHANNEL];	/* Memory Technlogy Reg */
+	u16 b0_ambpresent0;			/* Branch 0, Channel 0 */
+	u16 b0_ambpresent1;			/* Brnach 0, Channel 1 */
+
+	u16 b1_mtr[DIMMS_PER_CHANNEL];	/* Memory Technlogy Reg */
+	u16 b1_ambpresent0;			/* Branch 1, Channel 8 */
+	u16 b1_ambpresent1;			/* Branch 1, Channel 1 */
+
+	/* DIMM information matrix, allocating architecture maximums */
+	struct i5400_dimm_info dimm_info[DIMMS_PER_CHANNEL][MAX_CHANNELS];
+
+	/* Actual values for this controller */
+	int maxch;				/* Max channels */
+	int maxdimmperch;			/* Max DIMMs per channel */
+};
+
+/* I5400 MCH error information retrieved from Hardware */
+struct i5400_error_info {
+	/* These registers are always read from the MC */
+	u32 ferr_fat_fbd;	/* First Errors Fatal */
+	u32 nerr_fat_fbd;	/* Next Errors Fatal */
+	u32 ferr_nf_fbd;	/* First Errors Non-Fatal */
+	u32 nerr_nf_fbd;	/* Next Errors Non-Fatal */
+
+	/* These registers are input ONLY if there was a Recoverable Error */
+	u32 redmemb;		/* Recoverable Mem Data Error log B */
+	u16 recmema;		/* Recoverable Mem Error log A */
+	u32 recmemb;		/* Recoverable Mem Error log B */
+
+	/* These registers are input ONLY if there was a Non-Rec Error */
+	u16 nrecmema;		/* Non-Recoverable Mem log A */
+	u32 nrecmemb;		/* Non-Recoverable Mem log B */
+
+};
+
+/* note that nrec_rdwr changed from NRECMEMA to NRECMEMB between the 5000 and
+   5400 better to use an inline function than a macro in this case */
+static inline int nrec_bank(struct i5400_error_info *info)
+{
+	return ((info->nrecmema) >> 12) & 0x7;
+}
+static inline int nrec_rank(struct i5400_error_info *info)
+{
+	return ((info->nrecmema) >> 8) & 0xf;
+}
+static inline int nrec_buf_id(struct i5400_error_info *info)
+{
+	return ((info->nrecmema)) & 0xff;
+}
+static inline int nrec_rdwr(struct i5400_error_info *info)
+{
+	return (info->nrecmemb) >> 31;
+}
+/* This applies to both NREC and REC string so it can be used with nrec_rdwr
+   and rec_rdwr */
+static inline const char *rdwr_str(int rdwr)
+{
+	return rdwr ? "Write" : "Read";
+}
+static inline int nrec_cas(struct i5400_error_info *info)
+{
+	return ((info->nrecmemb) >> 16) & 0x1fff;
+}
+static inline int nrec_ras(struct i5400_error_info *info)
+{
+	return (info->nrecmemb) & 0xffff;
+}
+static inline int rec_bank(struct i5400_error_info *info)
+{
+	return ((info->recmema) >> 12) & 0x7;
+}
+static inline int rec_rank(struct i5400_error_info *info)
+{
+	return ((info->recmema) >> 8) & 0xf;
+}
+static inline int rec_rdwr(struct i5400_error_info *info)
+{
+	return (info->recmemb) >> 31;
+}
+static inline int rec_cas(struct i5400_error_info *info)
+{
+	return ((info->recmemb) >> 16) & 0x1fff;
+}
+static inline int rec_ras(struct i5400_error_info *info)
+{
+	return (info->recmemb) & 0xffff;
+}
+
+static struct edac_pci_ctl_info *i5400_pci;
+
+/*
+ *	i5400_get_error_info	Retrieve the hardware error information from
+ *				the hardware and cache it in the 'info'
+ *				structure
+ */
+static void i5400_get_error_info(struct mem_ctl_info *mci,
+				 struct i5400_error_info *info)
+{
+	struct i5400_pvt *pvt;
+	u32 value;
+
+	pvt = mci->pvt_info;
+
+	/* read in the 1st FATAL error register */
+	pci_read_config_dword(pvt->branchmap_werrors, FERR_FAT_FBD, &value);
+
+	/* Mask only the bits that the doc says are valid
+	 */
+	value &= (FERR_FAT_FBDCHAN | FERR_FAT_MASK);
+
+	/* If there is an error, then read in the
+	   NEXT FATAL error register and the Memory Error Log Register A
+	 */
+	if (value & FERR_FAT_MASK) {
+		info->ferr_fat_fbd = value;
+
+		/* harvest the various error data we need */
+		pci_read_config_dword(pvt->branchmap_werrors,
+				NERR_FAT_FBD, &info->nerr_fat_fbd);
+		pci_read_config_word(pvt->branchmap_werrors,
+				NRECMEMA, &info->nrecmema);
+		pci_read_config_dword(pvt->branchmap_werrors,
+				NRECMEMB, &info->nrecmemb);
+
+		/* Clear the error bits, by writing them back */
+		pci_write_config_dword(pvt->branchmap_werrors,
+				FERR_FAT_FBD, value);
+	} else {
+		info->ferr_fat_fbd = 0;
+		info->nerr_fat_fbd = 0;
+		info->nrecmema = 0;
+		info->nrecmemb = 0;
+	}
+
+	/* read in the 1st NON-FATAL error register */
+	pci_read_config_dword(pvt->branchmap_werrors, FERR_NF_FBD, &value);
+
+	/* If there is an error, then read in the 1st NON-FATAL error
+	 * register as well */
+	if (value & FERR_NF_MASK) {
+		info->ferr_nf_fbd = value;
+
+		/* harvest the various error data we need */
+		pci_read_config_dword(pvt->branchmap_werrors,
+				NERR_NF_FBD, &info->nerr_nf_fbd);
+		pci_read_config_word(pvt->branchmap_werrors,
+				RECMEMA, &info->recmema);
+		pci_read_config_dword(pvt->branchmap_werrors,
+				RECMEMB, &info->recmemb);
+		pci_read_config_dword(pvt->branchmap_werrors,
+				REDMEMB, &info->redmemb);
+
+		/* Clear the error bits, by writing them back */
+		pci_write_config_dword(pvt->branchmap_werrors,
+				FERR_NF_FBD, value);
+	} else {
+		info->ferr_nf_fbd = 0;
+		info->nerr_nf_fbd = 0;
+		info->recmema = 0;
+		info->recmemb = 0;
+		info->redmemb = 0;
+	}
+}
+
+/*
+ * i5400_proccess_non_recoverable_info(struct mem_ctl_info *mci,
+ * 					struct i5400_error_info *info,
+ * 					int handle_errors);
+ *
+ *	handle the Intel FATAL and unrecoverable errors, if any
+ */
+static void i5400_proccess_non_recoverable_info(struct mem_ctl_info *mci,
+				    struct i5400_error_info *info,
+				    unsigned long allErrors)
+{
+	char msg[EDAC_MC_LABEL_LEN + 1 + 90 + 80];
+	int branch;
+	int channel;
+	int bank;
+	int buf_id;
+	int rank;
+	int rdwr;
+	int ras, cas;
+	int errnum;
+	char *type = NULL;
+	enum hw_event_mc_err_type tp_event = HW_EVENT_ERR_UNCORRECTED;
+
+	if (!allErrors)
+		return;		/* if no error, return now */
+
+	if (allErrors &  ERROR_FAT_MASK) {
+		type = "FATAL";
+		tp_event = HW_EVENT_ERR_FATAL;
+	} else if (allErrors & FERR_NF_UNCORRECTABLE)
+		type = "NON-FATAL uncorrected";
+	else
+		type = "NON-FATAL recoverable";
+
+	/* ONLY ONE of the possible error bits will be set, as per the docs */
+
+	branch = extract_fbdchan_indx(info->ferr_fat_fbd);
+	channel = branch;
+
+	/* Use the NON-Recoverable macros to extract data */
+	bank = nrec_bank(info);
+	rank = nrec_rank(info);
+	buf_id = nrec_buf_id(info);
+	rdwr = nrec_rdwr(info);
+	ras = nrec_ras(info);
+	cas = nrec_cas(info);
+
+	edac_dbg(0, "\t\tDIMM= %d  Channels= %d,%d  (Branch= %d DRAM Bank= %d Buffer ID = %d rdwr= %s ras= %d cas= %d)\n",
+		 rank, channel, channel + 1, branch >> 1, bank,
+		 buf_id, rdwr_str(rdwr), ras, cas);
+
+	/* Only 1 bit will be on */
+	errnum = find_first_bit(&allErrors, ARRAY_SIZE(error_name));
+
+	/* Form out message */
+	snprintf(msg, sizeof(msg),
+		 "Bank=%d Buffer ID = %d RAS=%d CAS=%d Err=0x%lx (%s)",
+		 bank, buf_id, ras, cas, allErrors, error_name[errnum]);
+
+	edac_mc_handle_error(tp_event, mci, 1, 0, 0, 0,
+			     branch >> 1, -1, rank,
+			     rdwr ? "Write error" : "Read error",
+			     msg);
+}
+
+/*
+ * i5400_process_fatal_error_info(struct mem_ctl_info *mci,
+ * 				struct i5400_error_info *info,
+ * 				int handle_errors);
+ *
+ *	handle the Intel NON-FATAL errors, if any
+ */
+static void i5400_process_nonfatal_error_info(struct mem_ctl_info *mci,
+					struct i5400_error_info *info)
+{
+	char msg[EDAC_MC_LABEL_LEN + 1 + 90 + 80];
+	unsigned long allErrors;
+	int branch;
+	int channel;
+	int bank;
+	int rank;
+	int rdwr;
+	int ras, cas;
+	int errnum;
+
+	/* mask off the Error bits that are possible */
+	allErrors = from_nf_ferr(info->ferr_nf_fbd & FERR_NF_MASK);
+	if (!allErrors)
+		return;		/* if no error, return now */
+
+	/* ONLY ONE of the possible error bits will be set, as per the docs */
+
+	if (allErrors & (ERROR_NF_UNCORRECTABLE | ERROR_NF_RECOVERABLE)) {
+		i5400_proccess_non_recoverable_info(mci, info, allErrors);
+		return;
+	}
+
+	/* Correctable errors */
+	if (allErrors & ERROR_NF_CORRECTABLE) {
+		edac_dbg(0, "\tCorrected bits= 0x%lx\n", allErrors);
+
+		branch = extract_fbdchan_indx(info->ferr_nf_fbd);
+
+		channel = 0;
+		if (REC_ECC_LOCATOR_ODD(info->redmemb))
+			channel = 1;
+
+		/* Convert channel to be based from zero, instead of
+		 * from branch base of 0 */
+		channel += branch;
+
+		bank = rec_bank(info);
+		rank = rec_rank(info);
+		rdwr = rec_rdwr(info);
+		ras = rec_ras(info);
+		cas = rec_cas(info);
+
+		/* Only 1 bit will be on */
+		errnum = find_first_bit(&allErrors, ARRAY_SIZE(error_name));
+
+		edac_dbg(0, "\t\tDIMM= %d Channel= %d  (Branch %d DRAM Bank= %d rdwr= %s ras= %d cas= %d)\n",
+			 rank, channel, branch >> 1, bank,
+			 rdwr_str(rdwr), ras, cas);
+
+		/* Form out message */
+		snprintf(msg, sizeof(msg),
+			 "Corrected error (Branch=%d DRAM-Bank=%d RDWR=%s "
+			 "RAS=%d CAS=%d, CE Err=0x%lx (%s))",
+			 branch >> 1, bank, rdwr_str(rdwr), ras, cas,
+			 allErrors, error_name[errnum]);
+
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 0, 0, 0,
+				     branch >> 1, channel % 2, rank,
+				     rdwr ? "Write error" : "Read error",
+				     msg);
+
+		return;
+	}
+
+	/* Miscellaneous errors */
+	errnum = find_first_bit(&allErrors, ARRAY_SIZE(error_name));
+
+	branch = extract_fbdchan_indx(info->ferr_nf_fbd);
+
+	i5400_mc_printk(mci, KERN_EMERG,
+			"Non-Fatal misc error (Branch=%d Err=%#lx (%s))",
+			branch >> 1, allErrors, error_name[errnum]);
+}
+
+/*
+ *	i5400_process_error_info	Process the error info that is
+ *	in the 'info' structure, previously retrieved from hardware
+ */
+static void i5400_process_error_info(struct mem_ctl_info *mci,
+				struct i5400_error_info *info)
+{	u32 allErrors;
+
+	/* First handle any fatal errors that occurred */
+	allErrors = (info->ferr_fat_fbd & FERR_FAT_MASK);
+	i5400_proccess_non_recoverable_info(mci, info, allErrors);
+
+	/* now handle any non-fatal errors that occurred */
+	i5400_process_nonfatal_error_info(mci, info);
+}
+
+/*
+ *	i5400_clear_error	Retrieve any error from the hardware
+ *				but do NOT process that error.
+ *				Used for 'clearing' out of previous errors
+ *				Called by the Core module.
+ */
+static void i5400_clear_error(struct mem_ctl_info *mci)
+{
+	struct i5400_error_info info;
+
+	i5400_get_error_info(mci, &info);
+}
+
+/*
+ *	i5400_check_error	Retrieve and process errors reported by the
+ *				hardware. Called by the Core module.
+ */
+static void i5400_check_error(struct mem_ctl_info *mci)
+{
+	struct i5400_error_info info;
+	edac_dbg(4, "MC%d\n", mci->mc_idx);
+	i5400_get_error_info(mci, &info);
+	i5400_process_error_info(mci, &info);
+}
+
+/*
+ *	i5400_put_devices	'put' all the devices that we have
+ *				reserved via 'get'
+ */
+static void i5400_put_devices(struct mem_ctl_info *mci)
+{
+	struct i5400_pvt *pvt;
+
+	pvt = mci->pvt_info;
+
+	/* Decrement usage count for devices */
+	pci_dev_put(pvt->branch_1);
+	pci_dev_put(pvt->branch_0);
+	pci_dev_put(pvt->fsb_error_regs);
+	pci_dev_put(pvt->branchmap_werrors);
+}
+
+/*
+ *	i5400_get_devices	Find and perform 'get' operation on the MCH's
+ *			device/functions we want to reference for this driver
+ *
+ *			Need to 'get' device 16 func 1 and func 2
+ */
+static int i5400_get_devices(struct mem_ctl_info *mci, int dev_idx)
+{
+	struct i5400_pvt *pvt;
+	struct pci_dev *pdev;
+
+	pvt = mci->pvt_info;
+	pvt->branchmap_werrors = NULL;
+	pvt->fsb_error_regs = NULL;
+	pvt->branch_0 = NULL;
+	pvt->branch_1 = NULL;
+
+	/* Attempt to 'get' the MCH register we want */
+	pdev = NULL;
+	while (1) {
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				      PCI_DEVICE_ID_INTEL_5400_ERR, pdev);
+		if (!pdev) {
+			/* End of list, leave */
+			i5400_printk(KERN_ERR,
+				"'system address,Process Bus' "
+				"device not found:"
+				"vendor 0x%x device 0x%x ERR func 1 "
+				"(broken BIOS?)\n",
+				PCI_VENDOR_ID_INTEL,
+				PCI_DEVICE_ID_INTEL_5400_ERR);
+			return -ENODEV;
+		}
+
+		/* Store device 16 func 1 */
+		if (PCI_FUNC(pdev->devfn) == 1)
+			break;
+	}
+	pvt->branchmap_werrors = pdev;
+
+	pdev = NULL;
+	while (1) {
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				      PCI_DEVICE_ID_INTEL_5400_ERR, pdev);
+		if (!pdev) {
+			/* End of list, leave */
+			i5400_printk(KERN_ERR,
+				"'system address,Process Bus' "
+				"device not found:"
+				"vendor 0x%x device 0x%x ERR func 2 "
+				"(broken BIOS?)\n",
+				PCI_VENDOR_ID_INTEL,
+				PCI_DEVICE_ID_INTEL_5400_ERR);
+
+			pci_dev_put(pvt->branchmap_werrors);
+			return -ENODEV;
+		}
+
+		/* Store device 16 func 2 */
+		if (PCI_FUNC(pdev->devfn) == 2)
+			break;
+	}
+	pvt->fsb_error_regs = pdev;
+
+	edac_dbg(1, "System Address, processor bus- PCI Bus ID: %s  %x:%x\n",
+		 pci_name(pvt->system_address),
+		 pvt->system_address->vendor, pvt->system_address->device);
+	edac_dbg(1, "Branchmap, control and errors - PCI Bus ID: %s  %x:%x\n",
+		 pci_name(pvt->branchmap_werrors),
+		 pvt->branchmap_werrors->vendor,
+		 pvt->branchmap_werrors->device);
+	edac_dbg(1, "FSB Error Regs - PCI Bus ID: %s  %x:%x\n",
+		 pci_name(pvt->fsb_error_regs),
+		 pvt->fsb_error_regs->vendor, pvt->fsb_error_regs->device);
+
+	pvt->branch_0 = pci_get_device(PCI_VENDOR_ID_INTEL,
+				       PCI_DEVICE_ID_INTEL_5400_FBD0, NULL);
+	if (!pvt->branch_0) {
+		i5400_printk(KERN_ERR,
+			"MC: 'BRANCH 0' device not found:"
+			"vendor 0x%x device 0x%x Func 0 (broken BIOS?)\n",
+			PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_FBD0);
+
+		pci_dev_put(pvt->fsb_error_regs);
+		pci_dev_put(pvt->branchmap_werrors);
+		return -ENODEV;
+	}
+
+	/* If this device claims to have more than 2 channels then
+	 * fetch Branch 1's information
+	 */
+	if (pvt->maxch < CHANNELS_PER_BRANCH)
+		return 0;
+
+	pvt->branch_1 = pci_get_device(PCI_VENDOR_ID_INTEL,
+				       PCI_DEVICE_ID_INTEL_5400_FBD1, NULL);
+	if (!pvt->branch_1) {
+		i5400_printk(KERN_ERR,
+			"MC: 'BRANCH 1' device not found:"
+			"vendor 0x%x device 0x%x Func 0 "
+			"(broken BIOS?)\n",
+			PCI_VENDOR_ID_INTEL,
+			PCI_DEVICE_ID_INTEL_5400_FBD1);
+
+		pci_dev_put(pvt->branch_0);
+		pci_dev_put(pvt->fsb_error_regs);
+		pci_dev_put(pvt->branchmap_werrors);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+/*
+ *	determine_amb_present
+ *
+ *		the information is contained in DIMMS_PER_CHANNEL different
+ *		registers determining which of the DIMMS_PER_CHANNEL requires
+ *              knowing which channel is in question
+ *
+ *	2 branches, each with 2 channels
+ *		b0_ambpresent0 for channel '0'
+ *		b0_ambpresent1 for channel '1'
+ *		b1_ambpresent0 for channel '2'
+ *		b1_ambpresent1 for channel '3'
+ */
+static int determine_amb_present_reg(struct i5400_pvt *pvt, int channel)
+{
+	int amb_present;
+
+	if (channel < CHANNELS_PER_BRANCH) {
+		if (channel & 0x1)
+			amb_present = pvt->b0_ambpresent1;
+		else
+			amb_present = pvt->b0_ambpresent0;
+	} else {
+		if (channel & 0x1)
+			amb_present = pvt->b1_ambpresent1;
+		else
+			amb_present = pvt->b1_ambpresent0;
+	}
+
+	return amb_present;
+}
+
+/*
+ * determine_mtr(pvt, dimm, channel)
+ *
+ * return the proper MTR register as determine by the dimm and desired channel
+ */
+static int determine_mtr(struct i5400_pvt *pvt, int dimm, int channel)
+{
+	int mtr;
+	int n;
+
+	/* There is one MTR for each slot pair of FB-DIMMs,
+	   Each slot pair may be at branch 0 or branch 1.
+	 */
+	n = dimm;
+
+	if (n >= DIMMS_PER_CHANNEL) {
+		edac_dbg(0, "ERROR: trying to access an invalid dimm: %d\n",
+			 dimm);
+		return 0;
+	}
+
+	if (channel < CHANNELS_PER_BRANCH)
+		mtr = pvt->b0_mtr[n];
+	else
+		mtr = pvt->b1_mtr[n];
+
+	return mtr;
+}
+
+/*
+ */
+static void decode_mtr(int slot_row, u16 mtr)
+{
+	int ans;
+
+	ans = MTR_DIMMS_PRESENT(mtr);
+
+	edac_dbg(2, "\tMTR%d=0x%x:  DIMMs are %sPresent\n",
+		 slot_row, mtr, ans ? "" : "NOT ");
+	if (!ans)
+		return;
+
+	edac_dbg(2, "\t\tWIDTH: x%d\n", MTR_DRAM_WIDTH(mtr));
+
+	edac_dbg(2, "\t\tELECTRICAL THROTTLING is %s\n",
+		 MTR_DIMMS_ETHROTTLE(mtr) ? "enabled" : "disabled");
+
+	edac_dbg(2, "\t\tNUMBANK: %d bank(s)\n", MTR_DRAM_BANKS(mtr));
+	edac_dbg(2, "\t\tNUMRANK: %s\n",
+		 MTR_DIMM_RANK(mtr) ? "double" : "single");
+	edac_dbg(2, "\t\tNUMROW: %s\n",
+		 MTR_DIMM_ROWS(mtr) == 0 ? "8,192 - 13 rows" :
+		 MTR_DIMM_ROWS(mtr) == 1 ? "16,384 - 14 rows" :
+		 MTR_DIMM_ROWS(mtr) == 2 ? "32,768 - 15 rows" :
+		 "65,536 - 16 rows");
+	edac_dbg(2, "\t\tNUMCOL: %s\n",
+		 MTR_DIMM_COLS(mtr) == 0 ? "1,024 - 10 columns" :
+		 MTR_DIMM_COLS(mtr) == 1 ? "2,048 - 11 columns" :
+		 MTR_DIMM_COLS(mtr) == 2 ? "4,096 - 12 columns" :
+		 "reserved");
+}
+
+static void handle_channel(struct i5400_pvt *pvt, int dimm, int channel,
+			struct i5400_dimm_info *dinfo)
+{
+	int mtr;
+	int amb_present_reg;
+	int addrBits;
+
+	mtr = determine_mtr(pvt, dimm, channel);
+	if (MTR_DIMMS_PRESENT(mtr)) {
+		amb_present_reg = determine_amb_present_reg(pvt, channel);
+
+		/* Determine if there is a DIMM present in this DIMM slot */
+		if (amb_present_reg & (1 << dimm)) {
+			/* Start with the number of bits for a Bank
+			 * on the DRAM */
+			addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr);
+			/* Add thenumber of ROW bits */
+			addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr);
+			/* add the number of COLUMN bits */
+			addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr);
+			/* add the number of RANK bits */
+			addrBits += MTR_DIMM_RANK(mtr);
+
+			addrBits += 6;	/* add 64 bits per DIMM */
+			addrBits -= 20;	/* divide by 2^^20 */
+			addrBits -= 3;	/* 8 bits per bytes */
+
+			dinfo->megabytes = 1 << addrBits;
+		}
+	}
+}
+
+/*
+ *	calculate_dimm_size
+ *
+ *	also will output a DIMM matrix map, if debug is enabled, for viewing
+ *	how the DIMMs are populated
+ */
+static void calculate_dimm_size(struct i5400_pvt *pvt)
+{
+	struct i5400_dimm_info *dinfo;
+	int dimm, max_dimms;
+	char *p, *mem_buffer;
+	int space, n;
+	int channel, branch;
+
+	/* ================= Generate some debug output ================= */
+	space = PAGE_SIZE;
+	mem_buffer = p = kmalloc(space, GFP_KERNEL);
+	if (p == NULL) {
+		i5400_printk(KERN_ERR, "MC: %s:%s() kmalloc() failed\n",
+			__FILE__, __func__);
+		return;
+	}
+
+	/* Scan all the actual DIMMS
+	 * and calculate the information for each DIMM
+	 * Start with the highest dimm first, to display it first
+	 * and work toward the 0th dimm
+	 */
+	max_dimms = pvt->maxdimmperch;
+	for (dimm = max_dimms - 1; dimm >= 0; dimm--) {
+
+		/* on an odd dimm, first output a 'boundary' marker,
+		 * then reset the message buffer  */
+		if (dimm & 0x1) {
+			n = snprintf(p, space, "---------------------------"
+					"-------------------------------");
+			p += n;
+			space -= n;
+			edac_dbg(2, "%s\n", mem_buffer);
+			p = mem_buffer;
+			space = PAGE_SIZE;
+		}
+		n = snprintf(p, space, "dimm %2d    ", dimm);
+		p += n;
+		space -= n;
+
+		for (channel = 0; channel < pvt->maxch; channel++) {
+			dinfo = &pvt->dimm_info[dimm][channel];
+			handle_channel(pvt, dimm, channel, dinfo);
+			n = snprintf(p, space, "%4d MB   | ", dinfo->megabytes);
+			p += n;
+			space -= n;
+		}
+		edac_dbg(2, "%s\n", mem_buffer);
+		p = mem_buffer;
+		space = PAGE_SIZE;
+	}
+
+	/* Output the last bottom 'boundary' marker */
+	n = snprintf(p, space, "---------------------------"
+			"-------------------------------");
+	p += n;
+	space -= n;
+	edac_dbg(2, "%s\n", mem_buffer);
+	p = mem_buffer;
+	space = PAGE_SIZE;
+
+	/* now output the 'channel' labels */
+	n = snprintf(p, space, "           ");
+	p += n;
+	space -= n;
+	for (channel = 0; channel < pvt->maxch; channel++) {
+		n = snprintf(p, space, "channel %d | ", channel);
+		p += n;
+		space -= n;
+	}
+
+	space -= n;
+	edac_dbg(2, "%s\n", mem_buffer);
+	p = mem_buffer;
+	space = PAGE_SIZE;
+
+	n = snprintf(p, space, "           ");
+	p += n;
+	for (branch = 0; branch < MAX_BRANCHES; branch++) {
+		n = snprintf(p, space, "       branch %d       | ", branch);
+		p += n;
+		space -= n;
+	}
+
+	/* output the last message and free buffer */
+	edac_dbg(2, "%s\n", mem_buffer);
+	kfree(mem_buffer);
+}
+
+/*
+ *	i5400_get_mc_regs	read in the necessary registers and
+ *				cache locally
+ *
+ *			Fills in the private data members
+ */
+static void i5400_get_mc_regs(struct mem_ctl_info *mci)
+{
+	struct i5400_pvt *pvt;
+	u32 actual_tolm;
+	u16 limit;
+	int slot_row;
+	int maxch;
+	int maxdimmperch;
+	int way0, way1;
+
+	pvt = mci->pvt_info;
+
+	pci_read_config_dword(pvt->system_address, AMBASE,
+			&pvt->u.ambase_bottom);
+	pci_read_config_dword(pvt->system_address, AMBASE + sizeof(u32),
+			&pvt->u.ambase_top);
+
+	maxdimmperch = pvt->maxdimmperch;
+	maxch = pvt->maxch;
+
+	edac_dbg(2, "AMBASE= 0x%lx  MAXCH= %d  MAX-DIMM-Per-CH= %d\n",
+		 (long unsigned int)pvt->ambase, pvt->maxch, pvt->maxdimmperch);
+
+	/* Get the Branch Map regs */
+	pci_read_config_word(pvt->branchmap_werrors, TOLM, &pvt->tolm);
+	pvt->tolm >>= 12;
+	edac_dbg(2, "\nTOLM (number of 256M regions) =%u (0x%x)\n",
+		 pvt->tolm, pvt->tolm);
+
+	actual_tolm = (u32) ((1000l * pvt->tolm) >> (30 - 28));
+	edac_dbg(2, "Actual TOLM byte addr=%u.%03u GB (0x%x)\n",
+		 actual_tolm/1000, actual_tolm % 1000, pvt->tolm << 28);
+
+	pci_read_config_word(pvt->branchmap_werrors, MIR0, &pvt->mir0);
+	pci_read_config_word(pvt->branchmap_werrors, MIR1, &pvt->mir1);
+
+	/* Get the MIR[0-1] regs */
+	limit = (pvt->mir0 >> 4) & 0x0fff;
+	way0 = pvt->mir0 & 0x1;
+	way1 = pvt->mir0 & 0x2;
+	edac_dbg(2, "MIR0: limit= 0x%x  WAY1= %u  WAY0= %x\n",
+		 limit, way1, way0);
+	limit = (pvt->mir1 >> 4) & 0xfff;
+	way0 = pvt->mir1 & 0x1;
+	way1 = pvt->mir1 & 0x2;
+	edac_dbg(2, "MIR1: limit= 0x%x  WAY1= %u  WAY0= %x\n",
+		 limit, way1, way0);
+
+	/* Get the set of MTR[0-3] regs by each branch */
+	for (slot_row = 0; slot_row < DIMMS_PER_CHANNEL; slot_row++) {
+		int where = MTR0 + (slot_row * sizeof(u16));
+
+		/* Branch 0 set of MTR registers */
+		pci_read_config_word(pvt->branch_0, where,
+				&pvt->b0_mtr[slot_row]);
+
+		edac_dbg(2, "MTR%d where=0x%x B0 value=0x%x\n",
+			 slot_row, where, pvt->b0_mtr[slot_row]);
+
+		if (pvt->maxch < CHANNELS_PER_BRANCH) {
+			pvt->b1_mtr[slot_row] = 0;
+			continue;
+		}
+
+		/* Branch 1 set of MTR registers */
+		pci_read_config_word(pvt->branch_1, where,
+				&pvt->b1_mtr[slot_row]);
+		edac_dbg(2, "MTR%d where=0x%x B1 value=0x%x\n",
+			 slot_row, where, pvt->b1_mtr[slot_row]);
+	}
+
+	/* Read and dump branch 0's MTRs */
+	edac_dbg(2, "Memory Technology Registers:\n");
+	edac_dbg(2, "   Branch 0:\n");
+	for (slot_row = 0; slot_row < DIMMS_PER_CHANNEL; slot_row++)
+		decode_mtr(slot_row, pvt->b0_mtr[slot_row]);
+
+	pci_read_config_word(pvt->branch_0, AMBPRESENT_0,
+			&pvt->b0_ambpresent0);
+	edac_dbg(2, "\t\tAMB-Branch 0-present0 0x%x:\n", pvt->b0_ambpresent0);
+	pci_read_config_word(pvt->branch_0, AMBPRESENT_1,
+			&pvt->b0_ambpresent1);
+	edac_dbg(2, "\t\tAMB-Branch 0-present1 0x%x:\n", pvt->b0_ambpresent1);
+
+	/* Only if we have 2 branchs (4 channels) */
+	if (pvt->maxch < CHANNELS_PER_BRANCH) {
+		pvt->b1_ambpresent0 = 0;
+		pvt->b1_ambpresent1 = 0;
+	} else {
+		/* Read and dump  branch 1's MTRs */
+		edac_dbg(2, "   Branch 1:\n");
+		for (slot_row = 0; slot_row < DIMMS_PER_CHANNEL; slot_row++)
+			decode_mtr(slot_row, pvt->b1_mtr[slot_row]);
+
+		pci_read_config_word(pvt->branch_1, AMBPRESENT_0,
+				&pvt->b1_ambpresent0);
+		edac_dbg(2, "\t\tAMB-Branch 1-present0 0x%x:\n",
+			 pvt->b1_ambpresent0);
+		pci_read_config_word(pvt->branch_1, AMBPRESENT_1,
+				&pvt->b1_ambpresent1);
+		edac_dbg(2, "\t\tAMB-Branch 1-present1 0x%x:\n",
+			 pvt->b1_ambpresent1);
+	}
+
+	/* Go and determine the size of each DIMM and place in an
+	 * orderly matrix */
+	calculate_dimm_size(pvt);
+}
+
+/*
+ *	i5400_init_dimms	Initialize the 'dimms' table within
+ *				the mci control	structure with the
+ *				addressing of memory.
+ *
+ *	return:
+ *		0	success
+ *		1	no actual memory found on this MC
+ */
+static int i5400_init_dimms(struct mem_ctl_info *mci)
+{
+	struct i5400_pvt *pvt;
+	struct dimm_info *dimm;
+	int ndimms, channel_count;
+	int max_dimms;
+	int mtr;
+	int size_mb;
+	int  channel, slot;
+
+	pvt = mci->pvt_info;
+
+	channel_count = pvt->maxch;
+	max_dimms = pvt->maxdimmperch;
+
+	ndimms = 0;
+
+	/*
+	 * FIXME: remove  pvt->dimm_info[slot][channel] and use the 3
+	 * layers here.
+	 */
+	for (channel = 0; channel < mci->layers[0].size * mci->layers[1].size;
+	     channel++) {
+		for (slot = 0; slot < mci->layers[2].size; slot++) {
+			mtr = determine_mtr(pvt, slot, channel);
+
+			/* if no DIMMS on this slot, continue */
+			if (!MTR_DIMMS_PRESENT(mtr))
+				continue;
+
+			dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers,
+				       channel / 2, channel % 2, slot);
+
+			size_mb =  pvt->dimm_info[slot][channel].megabytes;
+
+			edac_dbg(2, "dimm (branch %d channel %d slot %d): %d.%03d GB\n",
+				 channel / 2, channel % 2, slot,
+				 size_mb / 1000, size_mb % 1000);
+
+			dimm->nr_pages = size_mb << 8;
+			dimm->grain = 8;
+			dimm->dtype = MTR_DRAM_WIDTH(mtr) == 8 ?
+				      DEV_X8 : DEV_X4;
+			dimm->mtype = MEM_FB_DDR2;
+			/*
+			 * The eccc mechanism is SDDC (aka SECC), with
+			 * is similar to Chipkill.
+			 */
+			dimm->edac_mode = MTR_DRAM_WIDTH(mtr) == 8 ?
+					  EDAC_S8ECD8ED : EDAC_S4ECD4ED;
+			ndimms++;
+		}
+	}
+
+	/*
+	 * When just one memory is provided, it should be at location (0,0,0).
+	 * With such single-DIMM mode, the SDCC algorithm degrades to SECDEC+.
+	 */
+	if (ndimms == 1)
+		mci->dimms[0]->edac_mode = EDAC_SECDED;
+
+	return (ndimms == 0);
+}
+
+/*
+ *	i5400_enable_error_reporting
+ *			Turn on the memory reporting features of the hardware
+ */
+static void i5400_enable_error_reporting(struct mem_ctl_info *mci)
+{
+	struct i5400_pvt *pvt;
+	u32 fbd_error_mask;
+
+	pvt = mci->pvt_info;
+
+	/* Read the FBD Error Mask Register */
+	pci_read_config_dword(pvt->branchmap_werrors, EMASK_FBD,
+			&fbd_error_mask);
+
+	/* Enable with a '0' */
+	fbd_error_mask &= ~(ENABLE_EMASK_ALL);
+
+	pci_write_config_dword(pvt->branchmap_werrors, EMASK_FBD,
+			fbd_error_mask);
+}
+
+/*
+ *	i5400_probe1	Probe for ONE instance of device to see if it is
+ *			present.
+ *	return:
+ *		0 for FOUND a device
+ *		< 0 for error code
+ */
+static int i5400_probe1(struct pci_dev *pdev, int dev_idx)
+{
+	struct mem_ctl_info *mci;
+	struct i5400_pvt *pvt;
+	struct edac_mc_layer layers[3];
+
+	if (dev_idx >= ARRAY_SIZE(i5400_devs))
+		return -EINVAL;
+
+	edac_dbg(0, "MC: pdev bus %u dev=0x%x fn=0x%x\n",
+		 pdev->bus->number,
+		 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+
+	/* We only are looking for func 0 of the set */
+	if (PCI_FUNC(pdev->devfn) != 0)
+		return -ENODEV;
+
+	/*
+	 * allocate a new MC control structure
+	 *
+	 * This drivers uses the DIMM slot as "csrow" and the rest as "channel".
+	 */
+	layers[0].type = EDAC_MC_LAYER_BRANCH;
+	layers[0].size = MAX_BRANCHES;
+	layers[0].is_virt_csrow = false;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = CHANNELS_PER_BRANCH;
+	layers[1].is_virt_csrow = false;
+	layers[2].type = EDAC_MC_LAYER_SLOT;
+	layers[2].size = DIMMS_PER_CHANNEL;
+	layers[2].is_virt_csrow = true;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt));
+	if (mci == NULL)
+		return -ENOMEM;
+
+	edac_dbg(0, "MC: mci = %p\n", mci);
+
+	mci->pdev = &pdev->dev;	/* record ptr  to the generic device */
+
+	pvt = mci->pvt_info;
+	pvt->system_address = pdev;	/* Record this device in our private */
+	pvt->maxch = MAX_CHANNELS;
+	pvt->maxdimmperch = DIMMS_PER_CHANNEL;
+
+	/* 'get' the pci devices we want to reserve for our use */
+	if (i5400_get_devices(mci, dev_idx))
+		goto fail0;
+
+	/* Time to get serious */
+	i5400_get_mc_regs(mci);	/* retrieve the hardware registers */
+
+	mci->mc_idx = 0;
+	mci->mtype_cap = MEM_FLAG_FB_DDR2;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE;
+	mci->edac_cap = EDAC_FLAG_NONE;
+	mci->mod_name = "i5400_edac.c";
+	mci->ctl_name = i5400_devs[dev_idx].ctl_name;
+	mci->dev_name = pci_name(pdev);
+	mci->ctl_page_to_phys = NULL;
+
+	/* Set the function pointer to an actual operation function */
+	mci->edac_check = i5400_check_error;
+
+	/* initialize the MC control structure 'dimms' table
+	 * with the mapping and control information */
+	if (i5400_init_dimms(mci)) {
+		edac_dbg(0, "MC: Setting mci->edac_cap to EDAC_FLAG_NONE because i5400_init_dimms() returned nonzero value\n");
+		mci->edac_cap = EDAC_FLAG_NONE;	/* no dimms found */
+	} else {
+		edac_dbg(1, "MC: Enable error reporting now\n");
+		i5400_enable_error_reporting(mci);
+	}
+
+	/* add this new MC control structure to EDAC's list of MCs */
+	if (edac_mc_add_mc(mci)) {
+		edac_dbg(0, "MC: failed edac_mc_add_mc()\n");
+		/* FIXME: perhaps some code should go here that disables error
+		 * reporting if we just enabled it
+		 */
+		goto fail1;
+	}
+
+	i5400_clear_error(mci);
+
+	/* allocating generic PCI control info */
+	i5400_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
+	if (!i5400_pci) {
+		printk(KERN_WARNING
+			"%s(): Unable to create PCI control\n",
+			__func__);
+		printk(KERN_WARNING
+			"%s(): PCI error report via EDAC not setup\n",
+			__func__);
+	}
+
+	return 0;
+
+	/* Error exit unwinding stack */
+fail1:
+
+	i5400_put_devices(mci);
+
+fail0:
+	edac_mc_free(mci);
+	return -ENODEV;
+}
+
+/*
+ *	i5400_init_one	constructor for one instance of device
+ *
+ * 	returns:
+ *		negative on error
+ *		count (>= 0)
+ */
+static int i5400_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	int rc;
+
+	edac_dbg(0, "MC:\n");
+
+	/* wake up device */
+	rc = pci_enable_device(pdev);
+	if (rc)
+		return rc;
+
+	/* now probe and enable the device */
+	return i5400_probe1(pdev, id->driver_data);
+}
+
+/*
+ *	i5400_remove_one	destructor for one instance of device
+ *
+ */
+static void i5400_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+
+	edac_dbg(0, "\n");
+
+	if (i5400_pci)
+		edac_pci_release_generic_ctl(i5400_pci);
+
+	mci = edac_mc_del_mc(&pdev->dev);
+	if (!mci)
+		return;
+
+	/* retrieve references to resources, and free those resources */
+	i5400_put_devices(mci);
+
+	pci_disable_device(pdev);
+
+	edac_mc_free(mci);
+}
+
+/*
+ *	pci_device_id	table for which devices we are looking for
+ *
+ *	The "E500P" device is the first device supported.
+ */
+static const struct pci_device_id i5400_pci_tbl[] = {
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_ERR)},
+	{0,}			/* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, i5400_pci_tbl);
+
+/*
+ *	i5400_driver	pci_driver structure for this module
+ *
+ */
+static struct pci_driver i5400_driver = {
+	.name = "i5400_edac",
+	.probe = i5400_init_one,
+	.remove = i5400_remove_one,
+	.id_table = i5400_pci_tbl,
+};
+
+/*
+ *	i5400_init		Module entry function
+ *			Try to initialize this module for its devices
+ */
+static int __init i5400_init(void)
+{
+	int pci_rc;
+
+	edac_dbg(2, "MC:\n");
+
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
+
+	pci_rc = pci_register_driver(&i5400_driver);
+
+	return (pci_rc < 0) ? pci_rc : 0;
+}
+
+/*
+ *	i5400_exit()	Module exit function
+ *			Unregister the driver
+ */
+static void __exit i5400_exit(void)
+{
+	edac_dbg(2, "MC:\n");
+	pci_unregister_driver(&i5400_driver);
+}
+
+module_init(i5400_init);
+module_exit(i5400_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ben Woodard <woodard@redhat.com>");
+MODULE_AUTHOR("Mauro Carvalho Chehab");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("MC Driver for Intel I5400 memory controllers - "
+		   I5400_REVISION);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/edac/i7300_edac.c b/drivers/edac/i7300_edac.c
new file mode 100644
index 000000000..6b5a554ba
--- /dev/null
+++ b/drivers/edac/i7300_edac.c
@@ -0,0 +1,1217 @@
+/*
+ * Intel 7300 class Memory Controllers kernel module (Clarksboro)
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2 only.
+ *
+ * Copyright (c) 2010 by:
+ *	 Mauro Carvalho Chehab
+ *
+ * Red Hat Inc. http://www.redhat.com
+ *
+ * Intel 7300 Chipset Memory Controller Hub (MCH) - Datasheet
+ *	http://www.intel.com/Assets/PDF/datasheet/318082.pdf
+ *
+ * TODO: The chipset allow checking for PCI Express errors also. Currently,
+ *	 the driver covers only memory error errors
+ *
+ * This driver uses "csrows" EDAC attribute to represent DIMM slot#
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/edac.h>
+#include <linux/mmzone.h>
+
+#include "edac_module.h"
+
+/*
+ * Alter this version for the I7300 module when modifications are made
+ */
+#define I7300_REVISION    " Ver: 1.0.0"
+
+#define EDAC_MOD_STR      "i7300_edac"
+
+#define i7300_printk(level, fmt, arg...) \
+	edac_printk(level, "i7300", fmt, ##arg)
+
+#define i7300_mc_printk(mci, level, fmt, arg...) \
+	edac_mc_chipset_printk(mci, level, "i7300", fmt, ##arg)
+
+/***********************************************
+ * i7300 Limit constants Structs and static vars
+ ***********************************************/
+
+/*
+ * Memory topology is organized as:
+ *	Branch 0 - 2 channels: channels 0 and 1 (FDB0 PCI dev 21.0)
+ *	Branch 1 - 2 channels: channels 2 and 3 (FDB1 PCI dev 22.0)
+ * Each channel can have to 8 DIMM sets (called as SLOTS)
+ * Slots should generally be filled in pairs
+ *	Except on Single Channel mode of operation
+ *		just slot 0/channel0 filled on this mode
+ *	On normal operation mode, the two channels on a branch should be
+ *		filled together for the same SLOT#
+ * When in mirrored mode, Branch 1 replicate memory at Branch 0, so, the four
+ *		channels on both branches should be filled
+ */
+
+/* Limits for i7300 */
+#define MAX_SLOTS		8
+#define MAX_BRANCHES		2
+#define MAX_CH_PER_BRANCH	2
+#define MAX_CHANNELS		(MAX_CH_PER_BRANCH * MAX_BRANCHES)
+#define MAX_MIR			3
+
+#define to_channel(ch, branch)	((((branch)) << 1) | (ch))
+
+#define to_csrow(slot, ch, branch)					\
+		(to_channel(ch, branch) | ((slot) << 2))
+
+/* Device name and register DID (Device ID) */
+struct i7300_dev_info {
+	const char *ctl_name;	/* name for this device */
+	u16 fsb_mapping_errors;	/* DID for the branchmap,control */
+};
+
+/* Table of devices attributes supported by this driver */
+static const struct i7300_dev_info i7300_devs[] = {
+	{
+		.ctl_name = "I7300",
+		.fsb_mapping_errors = PCI_DEVICE_ID_INTEL_I7300_MCH_ERR,
+	},
+};
+
+struct i7300_dimm_info {
+	int megabytes;		/* size, 0 means not present  */
+};
+
+/* driver private data structure */
+struct i7300_pvt {
+	struct pci_dev *pci_dev_16_0_fsb_ctlr;		/* 16.0 */
+	struct pci_dev *pci_dev_16_1_fsb_addr_map;	/* 16.1 */
+	struct pci_dev *pci_dev_16_2_fsb_err_regs;	/* 16.2 */
+	struct pci_dev *pci_dev_2x_0_fbd_branch[MAX_BRANCHES];	/* 21.0  and 22.0 */
+
+	u16 tolm;				/* top of low memory */
+	u64 ambase;				/* AMB BAR */
+
+	u32 mc_settings;			/* Report several settings */
+	u32 mc_settings_a;
+
+	u16 mir[MAX_MIR];			/* Memory Interleave Reg*/
+
+	u16 mtr[MAX_SLOTS][MAX_BRANCHES];	/* Memory Technlogy Reg */
+	u16 ambpresent[MAX_CHANNELS];		/* AMB present regs */
+
+	/* DIMM information matrix, allocating architecture maximums */
+	struct i7300_dimm_info dimm_info[MAX_SLOTS][MAX_CHANNELS];
+
+	/* Temporary buffer for use when preparing error messages */
+	char *tmp_prt_buffer;
+};
+
+/* FIXME: Why do we need to have this static? */
+static struct edac_pci_ctl_info *i7300_pci;
+
+/***************************************************
+ * i7300 Register definitions for memory enumeration
+ ***************************************************/
+
+/*
+ * Device 16,
+ * Function 0: System Address (not documented)
+ * Function 1: Memory Branch Map, Control, Errors Register
+ */
+
+	/* OFFSETS for Function 0 */
+#define AMBASE			0x48 /* AMB Mem Mapped Reg Region Base */
+#define MAXCH			0x56 /* Max Channel Number */
+#define MAXDIMMPERCH		0x57 /* Max DIMM PER Channel Number */
+
+	/* OFFSETS for Function 1 */
+#define MC_SETTINGS		0x40
+  #define IS_MIRRORED(mc)		((mc) & (1 << 16))
+  #define IS_ECC_ENABLED(mc)		((mc) & (1 << 5))
+  #define IS_RETRY_ENABLED(mc)		((mc) & (1 << 31))
+  #define IS_SCRBALGO_ENHANCED(mc)	((mc) & (1 << 8))
+
+#define MC_SETTINGS_A		0x58
+  #define IS_SINGLE_MODE(mca)		((mca) & (1 << 14))
+
+#define TOLM			0x6C
+
+#define MIR0			0x80
+#define MIR1			0x84
+#define MIR2			0x88
+
+/*
+ * Note: Other Intel EDAC drivers use AMBPRESENT to identify if the available
+ * memory. From datasheet item 7.3.1 (FB-DIMM technology & organization), it
+ * seems that we cannot use this information directly for the same usage.
+ * Each memory slot may have up to 2 AMB interfaces, one for income and another
+ * for outcome interface to the next slot.
+ * For now, the driver just stores the AMB present registers, but rely only at
+ * the MTR info to detect memory.
+ * Datasheet is also not clear about how to map each AMBPRESENT registers to
+ * one of the 4 available channels.
+ */
+#define AMBPRESENT_0	0x64
+#define AMBPRESENT_1	0x66
+
+static const u16 mtr_regs[MAX_SLOTS] = {
+	0x80, 0x84, 0x88, 0x8c,
+	0x82, 0x86, 0x8a, 0x8e
+};
+
+/*
+ * Defines to extract the vaious fields from the
+ *	MTRx - Memory Technology Registers
+ */
+#define MTR_DIMMS_PRESENT(mtr)		((mtr) & (1 << 8))
+#define MTR_DIMMS_ETHROTTLE(mtr)	((mtr) & (1 << 7))
+#define MTR_DRAM_WIDTH(mtr)		(((mtr) & (1 << 6)) ? 8 : 4)
+#define MTR_DRAM_BANKS(mtr)		(((mtr) & (1 << 5)) ? 8 : 4)
+#define MTR_DIMM_RANKS(mtr)		(((mtr) & (1 << 4)) ? 1 : 0)
+#define MTR_DIMM_ROWS(mtr)		(((mtr) >> 2) & 0x3)
+#define MTR_DRAM_BANKS_ADDR_BITS	2
+#define MTR_DIMM_ROWS_ADDR_BITS(mtr)	(MTR_DIMM_ROWS(mtr) + 13)
+#define MTR_DIMM_COLS(mtr)		((mtr) & 0x3)
+#define MTR_DIMM_COLS_ADDR_BITS(mtr)	(MTR_DIMM_COLS(mtr) + 10)
+
+/************************************************
+ * i7300 Register definitions for error detection
+ ************************************************/
+
+/*
+ * Device 16.1: FBD Error Registers
+ */
+#define FERR_FAT_FBD	0x98
+static const char *ferr_fat_fbd_name[] = {
+	[22] = "Non-Redundant Fast Reset Timeout",
+	[2]  = ">Tmid Thermal event with intelligent throttling disabled",
+	[1]  = "Memory or FBD configuration CRC read error",
+	[0]  = "Memory Write error on non-redundant retry or "
+	       "FBD configuration Write error on retry",
+};
+#define GET_FBD_FAT_IDX(fbderr)	(((fbderr) >> 28) & 3)
+#define FERR_FAT_FBD_ERR_MASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 22))
+
+#define FERR_NF_FBD	0xa0
+static const char *ferr_nf_fbd_name[] = {
+	[24] = "DIMM-Spare Copy Completed",
+	[23] = "DIMM-Spare Copy Initiated",
+	[22] = "Redundant Fast Reset Timeout",
+	[21] = "Memory Write error on redundant retry",
+	[18] = "SPD protocol Error",
+	[17] = "FBD Northbound parity error on FBD Sync Status",
+	[16] = "Correctable Patrol Data ECC",
+	[15] = "Correctable Resilver- or Spare-Copy Data ECC",
+	[14] = "Correctable Mirrored Demand Data ECC",
+	[13] = "Correctable Non-Mirrored Demand Data ECC",
+	[11] = "Memory or FBD configuration CRC read error",
+	[10] = "FBD Configuration Write error on first attempt",
+	[9]  = "Memory Write error on first attempt",
+	[8]  = "Non-Aliased Uncorrectable Patrol Data ECC",
+	[7]  = "Non-Aliased Uncorrectable Resilver- or Spare-Copy Data ECC",
+	[6]  = "Non-Aliased Uncorrectable Mirrored Demand Data ECC",
+	[5]  = "Non-Aliased Uncorrectable Non-Mirrored Demand Data ECC",
+	[4]  = "Aliased Uncorrectable Patrol Data ECC",
+	[3]  = "Aliased Uncorrectable Resilver- or Spare-Copy Data ECC",
+	[2]  = "Aliased Uncorrectable Mirrored Demand Data ECC",
+	[1]  = "Aliased Uncorrectable Non-Mirrored Demand Data ECC",
+	[0]  = "Uncorrectable Data ECC on Replay",
+};
+#define GET_FBD_NF_IDX(fbderr)	(((fbderr) >> 28) & 3)
+#define FERR_NF_FBD_ERR_MASK ((1 << 24) | (1 << 23) | (1 << 22) | (1 << 21) |\
+			      (1 << 18) | (1 << 17) | (1 << 16) | (1 << 15) |\
+			      (1 << 14) | (1 << 13) | (1 << 11) | (1 << 10) |\
+			      (1 << 9)  | (1 << 8)  | (1 << 7)  | (1 << 6)  |\
+			      (1 << 5)  | (1 << 4)  | (1 << 3)  | (1 << 2)  |\
+			      (1 << 1)  | (1 << 0))
+
+#define EMASK_FBD	0xa8
+#define EMASK_FBD_ERR_MASK ((1 << 27) | (1 << 26) | (1 << 25) | (1 << 24) |\
+			    (1 << 22) | (1 << 21) | (1 << 20) | (1 << 19) |\
+			    (1 << 18) | (1 << 17) | (1 << 16) | (1 << 14) |\
+			    (1 << 13) | (1 << 12) | (1 << 11) | (1 << 10) |\
+			    (1 << 9)  | (1 << 8)  | (1 << 7)  | (1 << 6)  |\
+			    (1 << 5)  | (1 << 4)  | (1 << 3)  | (1 << 2)  |\
+			    (1 << 1)  | (1 << 0))
+
+/*
+ * Device 16.2: Global Error Registers
+ */
+
+#define FERR_GLOBAL_HI	0x48
+static const char *ferr_global_hi_name[] = {
+	[3] = "FSB 3 Fatal Error",
+	[2] = "FSB 2 Fatal Error",
+	[1] = "FSB 1 Fatal Error",
+	[0] = "FSB 0 Fatal Error",
+};
+#define ferr_global_hi_is_fatal(errno)	1
+
+#define FERR_GLOBAL_LO	0x40
+static const char *ferr_global_lo_name[] = {
+	[31] = "Internal MCH Fatal Error",
+	[30] = "Intel QuickData Technology Device Fatal Error",
+	[29] = "FSB1 Fatal Error",
+	[28] = "FSB0 Fatal Error",
+	[27] = "FBD Channel 3 Fatal Error",
+	[26] = "FBD Channel 2 Fatal Error",
+	[25] = "FBD Channel 1 Fatal Error",
+	[24] = "FBD Channel 0 Fatal Error",
+	[23] = "PCI Express Device 7Fatal Error",
+	[22] = "PCI Express Device 6 Fatal Error",
+	[21] = "PCI Express Device 5 Fatal Error",
+	[20] = "PCI Express Device 4 Fatal Error",
+	[19] = "PCI Express Device 3 Fatal Error",
+	[18] = "PCI Express Device 2 Fatal Error",
+	[17] = "PCI Express Device 1 Fatal Error",
+	[16] = "ESI Fatal Error",
+	[15] = "Internal MCH Non-Fatal Error",
+	[14] = "Intel QuickData Technology Device Non Fatal Error",
+	[13] = "FSB1 Non-Fatal Error",
+	[12] = "FSB 0 Non-Fatal Error",
+	[11] = "FBD Channel 3 Non-Fatal Error",
+	[10] = "FBD Channel 2 Non-Fatal Error",
+	[9]  = "FBD Channel 1 Non-Fatal Error",
+	[8]  = "FBD Channel 0 Non-Fatal Error",
+	[7]  = "PCI Express Device 7 Non-Fatal Error",
+	[6]  = "PCI Express Device 6 Non-Fatal Error",
+	[5]  = "PCI Express Device 5 Non-Fatal Error",
+	[4]  = "PCI Express Device 4 Non-Fatal Error",
+	[3]  = "PCI Express Device 3 Non-Fatal Error",
+	[2]  = "PCI Express Device 2 Non-Fatal Error",
+	[1]  = "PCI Express Device 1 Non-Fatal Error",
+	[0]  = "ESI Non-Fatal Error",
+};
+#define ferr_global_lo_is_fatal(errno)	((errno < 16) ? 0 : 1)
+
+#define NRECMEMA	0xbe
+  #define NRECMEMA_BANK(v)	(((v) >> 12) & 7)
+  #define NRECMEMA_RANK(v)	(((v) >> 8) & 15)
+
+#define NRECMEMB	0xc0
+  #define NRECMEMB_IS_WR(v)	((v) & (1 << 31))
+  #define NRECMEMB_CAS(v)	(((v) >> 16) & 0x1fff)
+  #define NRECMEMB_RAS(v)	((v) & 0xffff)
+
+#define REDMEMA		0xdc
+
+#define REDMEMB		0x7c
+
+#define RECMEMA		0xe0
+  #define RECMEMA_BANK(v)	(((v) >> 12) & 7)
+  #define RECMEMA_RANK(v)	(((v) >> 8) & 15)
+
+#define RECMEMB		0xe4
+  #define RECMEMB_IS_WR(v)	((v) & (1 << 31))
+  #define RECMEMB_CAS(v)	(((v) >> 16) & 0x1fff)
+  #define RECMEMB_RAS(v)	((v) & 0xffff)
+
+/********************************************
+ * i7300 Functions related to error detection
+ ********************************************/
+
+/**
+ * get_err_from_table() - Gets the error message from a table
+ * @table:	table name (array of char *)
+ * @size:	number of elements at the table
+ * @pos:	position of the element to be returned
+ *
+ * This is a small routine that gets the pos-th element of a table. If the
+ * element doesn't exist (or it is empty), it returns "reserved".
+ * Instead of calling it directly, the better is to call via the macro
+ * GET_ERR_FROM_TABLE(), that automatically checks the table size via
+ * ARRAY_SIZE() macro
+ */
+static const char *get_err_from_table(const char *table[], int size, int pos)
+{
+	if (unlikely(pos >= size))
+		return "Reserved";
+
+	if (unlikely(!table[pos]))
+		return "Reserved";
+
+	return table[pos];
+}
+
+#define GET_ERR_FROM_TABLE(table, pos)				\
+	get_err_from_table(table, ARRAY_SIZE(table), pos)
+
+/**
+ * i7300_process_error_global() - Retrieve the hardware error information from
+ *				  the hardware global error registers and
+ *				  sends it to dmesg
+ * @mci: struct mem_ctl_info pointer
+ */
+static void i7300_process_error_global(struct mem_ctl_info *mci)
+{
+	struct i7300_pvt *pvt;
+	u32 errnum, error_reg;
+	unsigned long errors;
+	const char *specific;
+	bool is_fatal;
+
+	pvt = mci->pvt_info;
+
+	/* read in the 1st FATAL error register */
+	pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
+			      FERR_GLOBAL_HI, &error_reg);
+	if (unlikely(error_reg)) {
+		errors = error_reg;
+		errnum = find_first_bit(&errors,
+					ARRAY_SIZE(ferr_global_hi_name));
+		specific = GET_ERR_FROM_TABLE(ferr_global_hi_name, errnum);
+		is_fatal = ferr_global_hi_is_fatal(errnum);
+
+		/* Clear the error bit */
+		pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
+				       FERR_GLOBAL_HI, error_reg);
+
+		goto error_global;
+	}
+
+	pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
+			      FERR_GLOBAL_LO, &error_reg);
+	if (unlikely(error_reg)) {
+		errors = error_reg;
+		errnum = find_first_bit(&errors,
+					ARRAY_SIZE(ferr_global_lo_name));
+		specific = GET_ERR_FROM_TABLE(ferr_global_lo_name, errnum);
+		is_fatal = ferr_global_lo_is_fatal(errnum);
+
+		/* Clear the error bit */
+		pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
+				       FERR_GLOBAL_LO, error_reg);
+
+		goto error_global;
+	}
+	return;
+
+error_global:
+	i7300_mc_printk(mci, KERN_EMERG, "%s misc error: %s\n",
+			is_fatal ? "Fatal" : "NOT fatal", specific);
+}
+
+/**
+ * i7300_process_fbd_error() - Retrieve the hardware error information from
+ *			       the FBD error registers and sends it via
+ *			       EDAC error API calls
+ * @mci: struct mem_ctl_info pointer
+ */
+static void i7300_process_fbd_error(struct mem_ctl_info *mci)
+{
+	struct i7300_pvt *pvt;
+	u32 errnum, value, error_reg;
+	u16 val16;
+	unsigned branch, channel, bank, rank, cas, ras;
+	u32 syndrome;
+
+	unsigned long errors;
+	const char *specific;
+	bool is_wr;
+
+	pvt = mci->pvt_info;
+
+	/* read in the 1st FATAL error register */
+	pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+			      FERR_FAT_FBD, &error_reg);
+	if (unlikely(error_reg & FERR_FAT_FBD_ERR_MASK)) {
+		errors = error_reg & FERR_FAT_FBD_ERR_MASK ;
+		errnum = find_first_bit(&errors,
+					ARRAY_SIZE(ferr_fat_fbd_name));
+		specific = GET_ERR_FROM_TABLE(ferr_fat_fbd_name, errnum);
+		branch = (GET_FBD_FAT_IDX(error_reg) == 2) ? 1 : 0;
+
+		pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map,
+				     NRECMEMA, &val16);
+		bank = NRECMEMA_BANK(val16);
+		rank = NRECMEMA_RANK(val16);
+
+		pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+				NRECMEMB, &value);
+		is_wr = NRECMEMB_IS_WR(value);
+		cas = NRECMEMB_CAS(value);
+		ras = NRECMEMB_RAS(value);
+
+		/* Clean the error register */
+		pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+				FERR_FAT_FBD, error_reg);
+
+		snprintf(pvt->tmp_prt_buffer, PAGE_SIZE,
+			 "Bank=%d RAS=%d CAS=%d Err=0x%lx (%s))",
+			 bank, ras, cas, errors, specific);
+
+		edac_mc_handle_error(HW_EVENT_ERR_FATAL, mci, 1, 0, 0, 0,
+				     branch, -1, rank,
+				     is_wr ? "Write error" : "Read error",
+				     pvt->tmp_prt_buffer);
+
+	}
+
+	/* read in the 1st NON-FATAL error register */
+	pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+			      FERR_NF_FBD, &error_reg);
+	if (unlikely(error_reg & FERR_NF_FBD_ERR_MASK)) {
+		errors = error_reg & FERR_NF_FBD_ERR_MASK;
+		errnum = find_first_bit(&errors,
+					ARRAY_SIZE(ferr_nf_fbd_name));
+		specific = GET_ERR_FROM_TABLE(ferr_nf_fbd_name, errnum);
+		branch = (GET_FBD_NF_IDX(error_reg) == 2) ? 1 : 0;
+
+		pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+			REDMEMA, &syndrome);
+
+		pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map,
+				     RECMEMA, &val16);
+		bank = RECMEMA_BANK(val16);
+		rank = RECMEMA_RANK(val16);
+
+		pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+				RECMEMB, &value);
+		is_wr = RECMEMB_IS_WR(value);
+		cas = RECMEMB_CAS(value);
+		ras = RECMEMB_RAS(value);
+
+		pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+				     REDMEMB, &value);
+		channel = (branch << 1);
+
+		/* Second channel ? */
+		channel += !!(value & BIT(17));
+
+		/* Clear the error bit */
+		pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+				FERR_NF_FBD, error_reg);
+
+		/* Form out message */
+		snprintf(pvt->tmp_prt_buffer, PAGE_SIZE,
+			 "DRAM-Bank=%d RAS=%d CAS=%d, Err=0x%lx (%s))",
+			 bank, ras, cas, errors, specific);
+
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 0, 0,
+				     syndrome,
+				     branch >> 1, channel % 2, rank,
+				     is_wr ? "Write error" : "Read error",
+				     pvt->tmp_prt_buffer);
+	}
+	return;
+}
+
+/**
+ * i7300_check_error() - Calls the error checking subroutines
+ * @mci: struct mem_ctl_info pointer
+ */
+static void i7300_check_error(struct mem_ctl_info *mci)
+{
+	i7300_process_error_global(mci);
+	i7300_process_fbd_error(mci);
+};
+
+/**
+ * i7300_clear_error() - Clears the error registers
+ * @mci: struct mem_ctl_info pointer
+ */
+static void i7300_clear_error(struct mem_ctl_info *mci)
+{
+	struct i7300_pvt *pvt = mci->pvt_info;
+	u32 value;
+	/*
+	 * All error values are RWC - we need to read and write 1 to the
+	 * bit that we want to cleanup
+	 */
+
+	/* Clear global error registers */
+	pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
+			      FERR_GLOBAL_HI, &value);
+	pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
+			      FERR_GLOBAL_HI, value);
+
+	pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
+			      FERR_GLOBAL_LO, &value);
+	pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
+			      FERR_GLOBAL_LO, value);
+
+	/* Clear FBD error registers */
+	pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+			      FERR_FAT_FBD, &value);
+	pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+			      FERR_FAT_FBD, value);
+
+	pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+			      FERR_NF_FBD, &value);
+	pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+			      FERR_NF_FBD, value);
+}
+
+/**
+ * i7300_enable_error_reporting() - Enable the memory reporting logic at the
+ *				    hardware
+ * @mci: struct mem_ctl_info pointer
+ */
+static void i7300_enable_error_reporting(struct mem_ctl_info *mci)
+{
+	struct i7300_pvt *pvt = mci->pvt_info;
+	u32 fbd_error_mask;
+
+	/* Read the FBD Error Mask Register */
+	pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+			      EMASK_FBD, &fbd_error_mask);
+
+	/* Enable with a '0' */
+	fbd_error_mask &= ~(EMASK_FBD_ERR_MASK);
+
+	pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+			       EMASK_FBD, fbd_error_mask);
+}
+
+/************************************************
+ * i7300 Functions related to memory enumberation
+ ************************************************/
+
+/**
+ * decode_mtr() - Decodes the MTR descriptor, filling the edac structs
+ * @pvt: pointer to the private data struct used by i7300 driver
+ * @slot: DIMM slot (0 to 7)
+ * @ch: Channel number within the branch (0 or 1)
+ * @branch: Branch number (0 or 1)
+ * @dinfo: Pointer to DIMM info where dimm size is stored
+ * @p_csrow: Pointer to the struct csrow_info that corresponds to that element
+ */
+static int decode_mtr(struct i7300_pvt *pvt,
+		      int slot, int ch, int branch,
+		      struct i7300_dimm_info *dinfo,
+		      struct dimm_info *dimm)
+{
+	int mtr, ans, addrBits, channel;
+
+	channel = to_channel(ch, branch);
+
+	mtr = pvt->mtr[slot][branch];
+	ans = MTR_DIMMS_PRESENT(mtr) ? 1 : 0;
+
+	edac_dbg(2, "\tMTR%d CH%d: DIMMs are %sPresent (mtr)\n",
+		 slot, channel, ans ? "" : "NOT ");
+
+	/* Determine if there is a DIMM present in this DIMM slot */
+	if (!ans)
+		return 0;
+
+	/* Start with the number of bits for a Bank
+	* on the DRAM */
+	addrBits = MTR_DRAM_BANKS_ADDR_BITS;
+	/* Add thenumber of ROW bits */
+	addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr);
+	/* add the number of COLUMN bits */
+	addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr);
+	/* add the number of RANK bits */
+	addrBits += MTR_DIMM_RANKS(mtr);
+
+	addrBits += 6;	/* add 64 bits per DIMM */
+	addrBits -= 20;	/* divide by 2^^20 */
+	addrBits -= 3;	/* 8 bits per bytes */
+
+	dinfo->megabytes = 1 << addrBits;
+
+	edac_dbg(2, "\t\tWIDTH: x%d\n", MTR_DRAM_WIDTH(mtr));
+
+	edac_dbg(2, "\t\tELECTRICAL THROTTLING is %s\n",
+		 MTR_DIMMS_ETHROTTLE(mtr) ? "enabled" : "disabled");
+
+	edac_dbg(2, "\t\tNUMBANK: %d bank(s)\n", MTR_DRAM_BANKS(mtr));
+	edac_dbg(2, "\t\tNUMRANK: %s\n",
+		 MTR_DIMM_RANKS(mtr) ? "double" : "single");
+	edac_dbg(2, "\t\tNUMROW: %s\n",
+		 MTR_DIMM_ROWS(mtr) == 0 ? "8,192 - 13 rows" :
+		 MTR_DIMM_ROWS(mtr) == 1 ? "16,384 - 14 rows" :
+		 MTR_DIMM_ROWS(mtr) == 2 ? "32,768 - 15 rows" :
+		 "65,536 - 16 rows");
+	edac_dbg(2, "\t\tNUMCOL: %s\n",
+		 MTR_DIMM_COLS(mtr) == 0 ? "1,024 - 10 columns" :
+		 MTR_DIMM_COLS(mtr) == 1 ? "2,048 - 11 columns" :
+		 MTR_DIMM_COLS(mtr) == 2 ? "4,096 - 12 columns" :
+		 "reserved");
+	edac_dbg(2, "\t\tSIZE: %d MB\n", dinfo->megabytes);
+
+	/*
+	 * The type of error detection actually depends of the
+	 * mode of operation. When it is just one single memory chip, at
+	 * socket 0, channel 0, it uses 8-byte-over-32-byte SECDED+ code.
+	 * In normal or mirrored mode, it uses Lockstep mode,
+	 * with the possibility of using an extended algorithm for x8 memories
+	 * See datasheet Sections 7.3.6 to 7.3.8
+	 */
+
+	dimm->nr_pages = MiB_TO_PAGES(dinfo->megabytes);
+	dimm->grain = 8;
+	dimm->mtype = MEM_FB_DDR2;
+	if (IS_SINGLE_MODE(pvt->mc_settings_a)) {
+		dimm->edac_mode = EDAC_SECDED;
+		edac_dbg(2, "\t\tECC code is 8-byte-over-32-byte SECDED+ code\n");
+	} else {
+		edac_dbg(2, "\t\tECC code is on Lockstep mode\n");
+		if (MTR_DRAM_WIDTH(mtr) == 8)
+			dimm->edac_mode = EDAC_S8ECD8ED;
+		else
+			dimm->edac_mode = EDAC_S4ECD4ED;
+	}
+
+	/* ask what device type on this row */
+	if (MTR_DRAM_WIDTH(mtr) == 8) {
+		edac_dbg(2, "\t\tScrub algorithm for x8 is on %s mode\n",
+			 IS_SCRBALGO_ENHANCED(pvt->mc_settings) ?
+			 "enhanced" : "normal");
+
+		dimm->dtype = DEV_X8;
+	} else
+		dimm->dtype = DEV_X4;
+
+	return mtr;
+}
+
+/**
+ * print_dimm_size() - Prints dump of the memory organization
+ * @pvt: pointer to the private data struct used by i7300 driver
+ *
+ * Useful for debug. If debug is disabled, this routine do nothing
+ */
+static void print_dimm_size(struct i7300_pvt *pvt)
+{
+#ifdef CONFIG_EDAC_DEBUG
+	struct i7300_dimm_info *dinfo;
+	char *p;
+	int space, n;
+	int channel, slot;
+
+	space = PAGE_SIZE;
+	p = pvt->tmp_prt_buffer;
+
+	n = snprintf(p, space, "              ");
+	p += n;
+	space -= n;
+	for (channel = 0; channel < MAX_CHANNELS; channel++) {
+		n = snprintf(p, space, "channel %d | ", channel);
+		p += n;
+		space -= n;
+	}
+	edac_dbg(2, "%s\n", pvt->tmp_prt_buffer);
+	p = pvt->tmp_prt_buffer;
+	space = PAGE_SIZE;
+	n = snprintf(p, space, "-------------------------------"
+			       "------------------------------");
+	p += n;
+	space -= n;
+	edac_dbg(2, "%s\n", pvt->tmp_prt_buffer);
+	p = pvt->tmp_prt_buffer;
+	space = PAGE_SIZE;
+
+	for (slot = 0; slot < MAX_SLOTS; slot++) {
+		n = snprintf(p, space, "csrow/SLOT %d  ", slot);
+		p += n;
+		space -= n;
+
+		for (channel = 0; channel < MAX_CHANNELS; channel++) {
+			dinfo = &pvt->dimm_info[slot][channel];
+			n = snprintf(p, space, "%4d MB   | ", dinfo->megabytes);
+			p += n;
+			space -= n;
+		}
+
+		edac_dbg(2, "%s\n", pvt->tmp_prt_buffer);
+		p = pvt->tmp_prt_buffer;
+		space = PAGE_SIZE;
+	}
+
+	n = snprintf(p, space, "-------------------------------"
+			       "------------------------------");
+	p += n;
+	space -= n;
+	edac_dbg(2, "%s\n", pvt->tmp_prt_buffer);
+	p = pvt->tmp_prt_buffer;
+	space = PAGE_SIZE;
+#endif
+}
+
+/**
+ * i7300_init_csrows() - Initialize the 'csrows' table within
+ *			 the mci control structure with the
+ *			 addressing of memory.
+ * @mci: struct mem_ctl_info pointer
+ */
+static int i7300_init_csrows(struct mem_ctl_info *mci)
+{
+	struct i7300_pvt *pvt;
+	struct i7300_dimm_info *dinfo;
+	int rc = -ENODEV;
+	int mtr;
+	int ch, branch, slot, channel, max_channel, max_branch;
+	struct dimm_info *dimm;
+
+	pvt = mci->pvt_info;
+
+	edac_dbg(2, "Memory Technology Registers:\n");
+
+	if (IS_SINGLE_MODE(pvt->mc_settings_a)) {
+		max_branch = 1;
+		max_channel = 1;
+	} else {
+		max_branch = MAX_BRANCHES;
+		max_channel = MAX_CH_PER_BRANCH;
+	}
+
+	/* Get the AMB present registers for the four channels */
+	for (branch = 0; branch < max_branch; branch++) {
+		/* Read and dump branch 0's MTRs */
+		channel = to_channel(0, branch);
+		pci_read_config_word(pvt->pci_dev_2x_0_fbd_branch[branch],
+				     AMBPRESENT_0,
+				&pvt->ambpresent[channel]);
+		edac_dbg(2, "\t\tAMB-present CH%d = 0x%x:\n",
+			 channel, pvt->ambpresent[channel]);
+
+		if (max_channel == 1)
+			continue;
+
+		channel = to_channel(1, branch);
+		pci_read_config_word(pvt->pci_dev_2x_0_fbd_branch[branch],
+				     AMBPRESENT_1,
+				&pvt->ambpresent[channel]);
+		edac_dbg(2, "\t\tAMB-present CH%d = 0x%x:\n",
+			 channel, pvt->ambpresent[channel]);
+	}
+
+	/* Get the set of MTR[0-7] regs by each branch */
+	for (slot = 0; slot < MAX_SLOTS; slot++) {
+		int where = mtr_regs[slot];
+		for (branch = 0; branch < max_branch; branch++) {
+			pci_read_config_word(pvt->pci_dev_2x_0_fbd_branch[branch],
+					where,
+					&pvt->mtr[slot][branch]);
+			for (ch = 0; ch < max_channel; ch++) {
+				int channel = to_channel(ch, branch);
+
+				dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
+					       mci->n_layers, branch, ch, slot);
+
+				dinfo = &pvt->dimm_info[slot][channel];
+
+				mtr = decode_mtr(pvt, slot, ch, branch,
+						 dinfo, dimm);
+
+				/* if no DIMMS on this row, continue */
+				if (!MTR_DIMMS_PRESENT(mtr))
+					continue;
+
+				rc = 0;
+
+			}
+		}
+	}
+
+	return rc;
+}
+
+/**
+ * decode_mir() - Decodes Memory Interleave Register (MIR) info
+ * @int mir_no: number of the MIR register to decode
+ * @mir: array with the MIR data cached on the driver
+ */
+static void decode_mir(int mir_no, u16 mir[MAX_MIR])
+{
+	if (mir[mir_no] & 3)
+		edac_dbg(2, "MIR%d: limit= 0x%x Branch(es) that participate: %s %s\n",
+			 mir_no,
+			 (mir[mir_no] >> 4) & 0xfff,
+			 (mir[mir_no] & 1) ? "B0" : "",
+			 (mir[mir_no] & 2) ? "B1" : "");
+}
+
+/**
+ * i7300_get_mc_regs() - Get the contents of the MC enumeration registers
+ * @mci: struct mem_ctl_info pointer
+ *
+ * Data read is cached internally for its usage when needed
+ */
+static int i7300_get_mc_regs(struct mem_ctl_info *mci)
+{
+	struct i7300_pvt *pvt;
+	u32 actual_tolm;
+	int i, rc;
+
+	pvt = mci->pvt_info;
+
+	pci_read_config_dword(pvt->pci_dev_16_0_fsb_ctlr, AMBASE,
+			(u32 *) &pvt->ambase);
+
+	edac_dbg(2, "AMBASE= 0x%lx\n", (long unsigned int)pvt->ambase);
+
+	/* Get the Branch Map regs */
+	pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map, TOLM, &pvt->tolm);
+	pvt->tolm >>= 12;
+	edac_dbg(2, "TOLM (number of 256M regions) =%u (0x%x)\n",
+		 pvt->tolm, pvt->tolm);
+
+	actual_tolm = (u32) ((1000l * pvt->tolm) >> (30 - 28));
+	edac_dbg(2, "Actual TOLM byte addr=%u.%03u GB (0x%x)\n",
+		 actual_tolm/1000, actual_tolm % 1000, pvt->tolm << 28);
+
+	/* Get memory controller settings */
+	pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map, MC_SETTINGS,
+			     &pvt->mc_settings);
+	pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map, MC_SETTINGS_A,
+			     &pvt->mc_settings_a);
+
+	if (IS_SINGLE_MODE(pvt->mc_settings_a))
+		edac_dbg(0, "Memory controller operating on single mode\n");
+	else
+		edac_dbg(0, "Memory controller operating on %smirrored mode\n",
+			 IS_MIRRORED(pvt->mc_settings) ? "" : "non-");
+
+	edac_dbg(0, "Error detection is %s\n",
+		 IS_ECC_ENABLED(pvt->mc_settings) ? "enabled" : "disabled");
+	edac_dbg(0, "Retry is %s\n",
+		 IS_RETRY_ENABLED(pvt->mc_settings) ? "enabled" : "disabled");
+
+	/* Get Memory Interleave Range registers */
+	pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map, MIR0,
+			     &pvt->mir[0]);
+	pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map, MIR1,
+			     &pvt->mir[1]);
+	pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map, MIR2,
+			     &pvt->mir[2]);
+
+	/* Decode the MIR regs */
+	for (i = 0; i < MAX_MIR; i++)
+		decode_mir(i, pvt->mir);
+
+	rc = i7300_init_csrows(mci);
+	if (rc < 0)
+		return rc;
+
+	/* Go and determine the size of each DIMM and place in an
+	 * orderly matrix */
+	print_dimm_size(pvt);
+
+	return 0;
+}
+
+/*************************************************
+ * i7300 Functions related to device probe/release
+ *************************************************/
+
+/**
+ * i7300_put_devices() - Release the PCI devices
+ * @mci: struct mem_ctl_info pointer
+ */
+static void i7300_put_devices(struct mem_ctl_info *mci)
+{
+	struct i7300_pvt *pvt;
+	int branch;
+
+	pvt = mci->pvt_info;
+
+	/* Decrement usage count for devices */
+	for (branch = 0; branch < MAX_CH_PER_BRANCH; branch++)
+		pci_dev_put(pvt->pci_dev_2x_0_fbd_branch[branch]);
+	pci_dev_put(pvt->pci_dev_16_2_fsb_err_regs);
+	pci_dev_put(pvt->pci_dev_16_1_fsb_addr_map);
+}
+
+/**
+ * i7300_get_devices() - Find and perform 'get' operation on the MCH's
+ *			 device/functions we want to reference for this driver
+ * @mci: struct mem_ctl_info pointer
+ *
+ * Access and prepare the several devices for usage:
+ * I7300 devices used by this driver:
+ *    Device 16, functions 0,1 and 2:	PCI_DEVICE_ID_INTEL_I7300_MCH_ERR
+ *    Device 21 function 0:		PCI_DEVICE_ID_INTEL_I7300_MCH_FB0
+ *    Device 22 function 0:		PCI_DEVICE_ID_INTEL_I7300_MCH_FB1
+ */
+static int i7300_get_devices(struct mem_ctl_info *mci)
+{
+	struct i7300_pvt *pvt;
+	struct pci_dev *pdev;
+
+	pvt = mci->pvt_info;
+
+	/* Attempt to 'get' the MCH register we want */
+	pdev = NULL;
+	while ((pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				      PCI_DEVICE_ID_INTEL_I7300_MCH_ERR,
+				      pdev))) {
+		/* Store device 16 funcs 1 and 2 */
+		switch (PCI_FUNC(pdev->devfn)) {
+		case 1:
+			if (!pvt->pci_dev_16_1_fsb_addr_map)
+				pvt->pci_dev_16_1_fsb_addr_map =
+							pci_dev_get(pdev);
+			break;
+		case 2:
+			if (!pvt->pci_dev_16_2_fsb_err_regs)
+				pvt->pci_dev_16_2_fsb_err_regs =
+							pci_dev_get(pdev);
+			break;
+		}
+	}
+
+	if (!pvt->pci_dev_16_1_fsb_addr_map ||
+	    !pvt->pci_dev_16_2_fsb_err_regs) {
+		/* At least one device was not found */
+		i7300_printk(KERN_ERR,
+			"'system address,Process Bus' device not found:"
+			"vendor 0x%x device 0x%x ERR funcs (broken BIOS?)\n",
+			PCI_VENDOR_ID_INTEL,
+			PCI_DEVICE_ID_INTEL_I7300_MCH_ERR);
+		goto error;
+	}
+
+	edac_dbg(1, "System Address, processor bus- PCI Bus ID: %s  %x:%x\n",
+		 pci_name(pvt->pci_dev_16_0_fsb_ctlr),
+		 pvt->pci_dev_16_0_fsb_ctlr->vendor,
+		 pvt->pci_dev_16_0_fsb_ctlr->device);
+	edac_dbg(1, "Branchmap, control and errors - PCI Bus ID: %s  %x:%x\n",
+		 pci_name(pvt->pci_dev_16_1_fsb_addr_map),
+		 pvt->pci_dev_16_1_fsb_addr_map->vendor,
+		 pvt->pci_dev_16_1_fsb_addr_map->device);
+	edac_dbg(1, "FSB Error Regs - PCI Bus ID: %s  %x:%x\n",
+		 pci_name(pvt->pci_dev_16_2_fsb_err_regs),
+		 pvt->pci_dev_16_2_fsb_err_regs->vendor,
+		 pvt->pci_dev_16_2_fsb_err_regs->device);
+
+	pvt->pci_dev_2x_0_fbd_branch[0] = pci_get_device(PCI_VENDOR_ID_INTEL,
+					    PCI_DEVICE_ID_INTEL_I7300_MCH_FB0,
+					    NULL);
+	if (!pvt->pci_dev_2x_0_fbd_branch[0]) {
+		i7300_printk(KERN_ERR,
+			"MC: 'BRANCH 0' device not found:"
+			"vendor 0x%x device 0x%x Func 0 (broken BIOS?)\n",
+			PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I7300_MCH_FB0);
+		goto error;
+	}
+
+	pvt->pci_dev_2x_0_fbd_branch[1] = pci_get_device(PCI_VENDOR_ID_INTEL,
+					    PCI_DEVICE_ID_INTEL_I7300_MCH_FB1,
+					    NULL);
+	if (!pvt->pci_dev_2x_0_fbd_branch[1]) {
+		i7300_printk(KERN_ERR,
+			"MC: 'BRANCH 1' device not found:"
+			"vendor 0x%x device 0x%x Func 0 "
+			"(broken BIOS?)\n",
+			PCI_VENDOR_ID_INTEL,
+			PCI_DEVICE_ID_INTEL_I7300_MCH_FB1);
+		goto error;
+	}
+
+	return 0;
+
+error:
+	i7300_put_devices(mci);
+	return -ENODEV;
+}
+
+/**
+ * i7300_init_one() - Probe for one instance of the device
+ * @pdev: struct pci_dev pointer
+ * @id: struct pci_device_id pointer - currently unused
+ */
+static int i7300_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[3];
+	struct i7300_pvt *pvt;
+	int rc;
+
+	/* wake up device */
+	rc = pci_enable_device(pdev);
+	if (rc == -EIO)
+		return rc;
+
+	edac_dbg(0, "MC: pdev bus %u dev=0x%x fn=0x%x\n",
+		 pdev->bus->number,
+		 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+
+	/* We only are looking for func 0 of the set */
+	if (PCI_FUNC(pdev->devfn) != 0)
+		return -ENODEV;
+
+	/* allocate a new MC control structure */
+	layers[0].type = EDAC_MC_LAYER_BRANCH;
+	layers[0].size = MAX_BRANCHES;
+	layers[0].is_virt_csrow = false;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = MAX_CH_PER_BRANCH;
+	layers[1].is_virt_csrow = true;
+	layers[2].type = EDAC_MC_LAYER_SLOT;
+	layers[2].size = MAX_SLOTS;
+	layers[2].is_virt_csrow = true;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt));
+	if (mci == NULL)
+		return -ENOMEM;
+
+	edac_dbg(0, "MC: mci = %p\n", mci);
+
+	mci->pdev = &pdev->dev;	/* record ptr  to the generic device */
+
+	pvt = mci->pvt_info;
+	pvt->pci_dev_16_0_fsb_ctlr = pdev;	/* Record this device in our private */
+
+	pvt->tmp_prt_buffer = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!pvt->tmp_prt_buffer) {
+		edac_mc_free(mci);
+		return -ENOMEM;
+	}
+
+	/* 'get' the pci devices we want to reserve for our use */
+	if (i7300_get_devices(mci))
+		goto fail0;
+
+	mci->mc_idx = 0;
+	mci->mtype_cap = MEM_FLAG_FB_DDR2;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE;
+	mci->edac_cap = EDAC_FLAG_NONE;
+	mci->mod_name = "i7300_edac.c";
+	mci->ctl_name = i7300_devs[0].ctl_name;
+	mci->dev_name = pci_name(pdev);
+	mci->ctl_page_to_phys = NULL;
+
+	/* Set the function pointer to an actual operation function */
+	mci->edac_check = i7300_check_error;
+
+	/* initialize the MC control structure 'csrows' table
+	 * with the mapping and control information */
+	if (i7300_get_mc_regs(mci)) {
+		edac_dbg(0, "MC: Setting mci->edac_cap to EDAC_FLAG_NONE because i7300_init_csrows() returned nonzero value\n");
+		mci->edac_cap = EDAC_FLAG_NONE;	/* no csrows found */
+	} else {
+		edac_dbg(1, "MC: Enable error reporting now\n");
+		i7300_enable_error_reporting(mci);
+	}
+
+	/* add this new MC control structure to EDAC's list of MCs */
+	if (edac_mc_add_mc(mci)) {
+		edac_dbg(0, "MC: failed edac_mc_add_mc()\n");
+		/* FIXME: perhaps some code should go here that disables error
+		 * reporting if we just enabled it
+		 */
+		goto fail1;
+	}
+
+	i7300_clear_error(mci);
+
+	/* allocating generic PCI control info */
+	i7300_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
+	if (!i7300_pci) {
+		printk(KERN_WARNING
+			"%s(): Unable to create PCI control\n",
+			__func__);
+		printk(KERN_WARNING
+			"%s(): PCI error report via EDAC not setup\n",
+			__func__);
+	}
+
+	return 0;
+
+	/* Error exit unwinding stack */
+fail1:
+
+	i7300_put_devices(mci);
+
+fail0:
+	kfree(pvt->tmp_prt_buffer);
+	edac_mc_free(mci);
+	return -ENODEV;
+}
+
+/**
+ * i7300_remove_one() - Remove the driver
+ * @pdev: struct pci_dev pointer
+ */
+static void i7300_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+	char *tmp;
+
+	edac_dbg(0, "\n");
+
+	if (i7300_pci)
+		edac_pci_release_generic_ctl(i7300_pci);
+
+	mci = edac_mc_del_mc(&pdev->dev);
+	if (!mci)
+		return;
+
+	tmp = ((struct i7300_pvt *)mci->pvt_info)->tmp_prt_buffer;
+
+	/* retrieve references to resources, and free those resources */
+	i7300_put_devices(mci);
+
+	kfree(tmp);
+	edac_mc_free(mci);
+}
+
+/*
+ * pci_device_id: table for which devices we are looking for
+ *
+ * Has only 8086:360c PCI ID
+ */
+static const struct pci_device_id i7300_pci_tbl[] = {
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I7300_MCH_ERR)},
+	{0,}			/* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, i7300_pci_tbl);
+
+/*
+ * i7300_driver: pci_driver structure for this module
+ */
+static struct pci_driver i7300_driver = {
+	.name = "i7300_edac",
+	.probe = i7300_init_one,
+	.remove = i7300_remove_one,
+	.id_table = i7300_pci_tbl,
+};
+
+/**
+ * i7300_init() - Registers the driver
+ */
+static int __init i7300_init(void)
+{
+	int pci_rc;
+
+	edac_dbg(2, "\n");
+
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
+
+	pci_rc = pci_register_driver(&i7300_driver);
+
+	return (pci_rc < 0) ? pci_rc : 0;
+}
+
+/**
+ * i7300_init() - Unregisters the driver
+ */
+static void __exit i7300_exit(void)
+{
+	edac_dbg(2, "\n");
+	pci_unregister_driver(&i7300_driver);
+}
+
+module_init(i7300_init);
+module_exit(i7300_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("MC Driver for Intel I7300 memory controllers - "
+		   I7300_REVISION);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
new file mode 100644
index 000000000..4a3300c2d
--- /dev/null
+++ b/drivers/edac/i7core_edac.c
@@ -0,0 +1,2403 @@
+/* Intel i7 core/Nehalem Memory Controller kernel module
+ *
+ * This driver supports the memory controllers found on the Intel
+ * processor families i7core, i7core 7xx/8xx, i5core, Xeon 35xx,
+ * Xeon 55xx and Xeon 56xx also known as Nehalem, Nehalem-EP, Lynnfield
+ * and Westmere-EP.
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2 only.
+ *
+ * Copyright (c) 2009-2010 by:
+ *	 Mauro Carvalho Chehab
+ *
+ * Red Hat Inc. http://www.redhat.com
+ *
+ * Forked and adapted from the i5400_edac driver
+ *
+ * Based on the following public Intel datasheets:
+ * Intel Core i7 Processor Extreme Edition and Intel Core i7 Processor
+ * Datasheet, Volume 2:
+ *	http://download.intel.com/design/processor/datashts/320835.pdf
+ * Intel Xeon Processor 5500 Series Datasheet Volume 2
+ *	http://www.intel.com/Assets/PDF/datasheet/321322.pdf
+ * also available at:
+ * 	http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/edac.h>
+#include <linux/mmzone.h>
+#include <linux/smp.h>
+#include <asm/mce.h>
+#include <asm/processor.h>
+#include <asm/div64.h>
+
+#include "edac_module.h"
+
+/* Static vars */
+static LIST_HEAD(i7core_edac_list);
+static DEFINE_MUTEX(i7core_edac_lock);
+static int probed;
+
+static int use_pci_fixup;
+module_param(use_pci_fixup, int, 0444);
+MODULE_PARM_DESC(use_pci_fixup, "Enable PCI fixup to seek for hidden devices");
+/*
+ * This is used for Nehalem-EP and Nehalem-EX devices, where the non-core
+ * registers start at bus 255, and are not reported by BIOS.
+ * We currently find devices with only 2 sockets. In order to support more QPI
+ * Quick Path Interconnect, just increment this number.
+ */
+#define MAX_SOCKET_BUSES	2
+
+
+/*
+ * Alter this version for the module when modifications are made
+ */
+#define I7CORE_REVISION    " Ver: 1.0.0"
+#define EDAC_MOD_STR      "i7core_edac"
+
+/*
+ * Debug macros
+ */
+#define i7core_printk(level, fmt, arg...)			\
+	edac_printk(level, "i7core", fmt, ##arg)
+
+#define i7core_mc_printk(mci, level, fmt, arg...)		\
+	edac_mc_chipset_printk(mci, level, "i7core", fmt, ##arg)
+
+/*
+ * i7core Memory Controller Registers
+ */
+
+	/* OFFSETS for Device 0 Function 0 */
+
+#define MC_CFG_CONTROL	0x90
+  #define MC_CFG_UNLOCK		0x02
+  #define MC_CFG_LOCK		0x00
+
+	/* OFFSETS for Device 3 Function 0 */
+
+#define MC_CONTROL	0x48
+#define MC_STATUS	0x4c
+#define MC_MAX_DOD	0x64
+
+/*
+ * OFFSETS for Device 3 Function 4, as indicated on Xeon 5500 datasheet:
+ * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
+ */
+
+#define MC_TEST_ERR_RCV1	0x60
+  #define DIMM2_COR_ERR(r)			((r) & 0x7fff)
+
+#define MC_TEST_ERR_RCV0	0x64
+  #define DIMM1_COR_ERR(r)			(((r) >> 16) & 0x7fff)
+  #define DIMM0_COR_ERR(r)			((r) & 0x7fff)
+
+/* OFFSETS for Device 3 Function 2, as indicated on Xeon 5500 datasheet */
+#define MC_SSRCONTROL		0x48
+  #define SSR_MODE_DISABLE	0x00
+  #define SSR_MODE_ENABLE	0x01
+  #define SSR_MODE_MASK		0x03
+
+#define MC_SCRUB_CONTROL	0x4c
+  #define STARTSCRUB		(1 << 24)
+  #define SCRUBINTERVAL_MASK    0xffffff
+
+#define MC_COR_ECC_CNT_0	0x80
+#define MC_COR_ECC_CNT_1	0x84
+#define MC_COR_ECC_CNT_2	0x88
+#define MC_COR_ECC_CNT_3	0x8c
+#define MC_COR_ECC_CNT_4	0x90
+#define MC_COR_ECC_CNT_5	0x94
+
+#define DIMM_TOP_COR_ERR(r)			(((r) >> 16) & 0x7fff)
+#define DIMM_BOT_COR_ERR(r)			((r) & 0x7fff)
+
+
+	/* OFFSETS for Devices 4,5 and 6 Function 0 */
+
+#define MC_CHANNEL_DIMM_INIT_PARAMS 0x58
+  #define THREE_DIMMS_PRESENT		(1 << 24)
+  #define SINGLE_QUAD_RANK_PRESENT	(1 << 23)
+  #define QUAD_RANK_PRESENT		(1 << 22)
+  #define REGISTERED_DIMM		(1 << 15)
+
+#define MC_CHANNEL_MAPPER	0x60
+  #define RDLCH(r, ch)		((((r) >> (3 + (ch * 6))) & 0x07) - 1)
+  #define WRLCH(r, ch)		((((r) >> (ch * 6)) & 0x07) - 1)
+
+#define MC_CHANNEL_RANK_PRESENT 0x7c
+  #define RANK_PRESENT_MASK		0xffff
+
+#define MC_CHANNEL_ADDR_MATCH	0xf0
+#define MC_CHANNEL_ERROR_MASK	0xf8
+#define MC_CHANNEL_ERROR_INJECT	0xfc
+  #define INJECT_ADDR_PARITY	0x10
+  #define INJECT_ECC		0x08
+  #define MASK_CACHELINE	0x06
+  #define MASK_FULL_CACHELINE	0x06
+  #define MASK_MSB32_CACHELINE	0x04
+  #define MASK_LSB32_CACHELINE	0x02
+  #define NO_MASK_CACHELINE	0x00
+  #define REPEAT_EN		0x01
+
+	/* OFFSETS for Devices 4,5 and 6 Function 1 */
+
+#define MC_DOD_CH_DIMM0		0x48
+#define MC_DOD_CH_DIMM1		0x4c
+#define MC_DOD_CH_DIMM2		0x50
+  #define RANKOFFSET_MASK	((1 << 12) | (1 << 11) | (1 << 10))
+  #define RANKOFFSET(x)		((x & RANKOFFSET_MASK) >> 10)
+  #define DIMM_PRESENT_MASK	(1 << 9)
+  #define DIMM_PRESENT(x)	(((x) & DIMM_PRESENT_MASK) >> 9)
+  #define MC_DOD_NUMBANK_MASK		((1 << 8) | (1 << 7))
+  #define MC_DOD_NUMBANK(x)		(((x) & MC_DOD_NUMBANK_MASK) >> 7)
+  #define MC_DOD_NUMRANK_MASK		((1 << 6) | (1 << 5))
+  #define MC_DOD_NUMRANK(x)		(((x) & MC_DOD_NUMRANK_MASK) >> 5)
+  #define MC_DOD_NUMROW_MASK		((1 << 4) | (1 << 3) | (1 << 2))
+  #define MC_DOD_NUMROW(x)		(((x) & MC_DOD_NUMROW_MASK) >> 2)
+  #define MC_DOD_NUMCOL_MASK		3
+  #define MC_DOD_NUMCOL(x)		((x) & MC_DOD_NUMCOL_MASK)
+
+#define MC_RANK_PRESENT		0x7c
+
+#define MC_SAG_CH_0	0x80
+#define MC_SAG_CH_1	0x84
+#define MC_SAG_CH_2	0x88
+#define MC_SAG_CH_3	0x8c
+#define MC_SAG_CH_4	0x90
+#define MC_SAG_CH_5	0x94
+#define MC_SAG_CH_6	0x98
+#define MC_SAG_CH_7	0x9c
+
+#define MC_RIR_LIMIT_CH_0	0x40
+#define MC_RIR_LIMIT_CH_1	0x44
+#define MC_RIR_LIMIT_CH_2	0x48
+#define MC_RIR_LIMIT_CH_3	0x4C
+#define MC_RIR_LIMIT_CH_4	0x50
+#define MC_RIR_LIMIT_CH_5	0x54
+#define MC_RIR_LIMIT_CH_6	0x58
+#define MC_RIR_LIMIT_CH_7	0x5C
+#define MC_RIR_LIMIT_MASK	((1 << 10) - 1)
+
+#define MC_RIR_WAY_CH		0x80
+  #define MC_RIR_WAY_OFFSET_MASK	(((1 << 14) - 1) & ~0x7)
+  #define MC_RIR_WAY_RANK_MASK		0x7
+
+/*
+ * i7core structs
+ */
+
+#define NUM_CHANS 3
+#define MAX_DIMMS 3		/* Max DIMMS per channel */
+#define MAX_MCR_FUNC  4
+#define MAX_CHAN_FUNC 3
+
+struct i7core_info {
+	u32	mc_control;
+	u32	mc_status;
+	u32	max_dod;
+	u32	ch_map;
+};
+
+
+struct i7core_inject {
+	int	enable;
+
+	u32	section;
+	u32	type;
+	u32	eccmask;
+
+	/* Error address mask */
+	int channel, dimm, rank, bank, page, col;
+};
+
+struct i7core_channel {
+	bool		is_3dimms_present;
+	bool		is_single_4rank;
+	bool		has_4rank;
+	u32		dimms;
+};
+
+struct pci_id_descr {
+	int			dev;
+	int			func;
+	int 			dev_id;
+	int			optional;
+};
+
+struct pci_id_table {
+	const struct pci_id_descr	*descr;
+	int				n_devs;
+};
+
+struct i7core_dev {
+	struct list_head	list;
+	u8			socket;
+	struct pci_dev		**pdev;
+	int			n_devs;
+	struct mem_ctl_info	*mci;
+};
+
+struct i7core_pvt {
+	struct device *addrmatch_dev, *chancounts_dev;
+
+	struct pci_dev	*pci_noncore;
+	struct pci_dev	*pci_mcr[MAX_MCR_FUNC + 1];
+	struct pci_dev	*pci_ch[NUM_CHANS][MAX_CHAN_FUNC + 1];
+
+	struct i7core_dev *i7core_dev;
+
+	struct i7core_info	info;
+	struct i7core_inject	inject;
+	struct i7core_channel	channel[NUM_CHANS];
+
+	int		ce_count_available;
+
+			/* ECC corrected errors counts per udimm */
+	unsigned long	udimm_ce_count[MAX_DIMMS];
+	int		udimm_last_ce_count[MAX_DIMMS];
+			/* ECC corrected errors counts per rdimm */
+	unsigned long	rdimm_ce_count[NUM_CHANS][MAX_DIMMS];
+	int		rdimm_last_ce_count[NUM_CHANS][MAX_DIMMS];
+
+	bool		is_registered, enable_scrub;
+
+	/* DCLK Frequency used for computing scrub rate */
+	int			dclk_freq;
+
+	/* Struct to control EDAC polling */
+	struct edac_pci_ctl_info *i7core_pci;
+};
+
+#define PCI_DESCR(device, function, device_id)	\
+	.dev = (device),			\
+	.func = (function),			\
+	.dev_id = (device_id)
+
+static const struct pci_id_descr pci_dev_descr_i7core_nehalem[] = {
+		/* Memory controller */
+	{ PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_I7_MCR)     },
+	{ PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_I7_MC_TAD)  },
+			/* Exists only for RDIMM */
+	{ PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_I7_MC_RAS), .optional = 1  },
+	{ PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_I7_MC_TEST) },
+
+		/* Channel 0 */
+	{ PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH0_CTRL) },
+	{ PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH0_ADDR) },
+	{ PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH0_RANK) },
+	{ PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH0_TC)   },
+
+		/* Channel 1 */
+	{ PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH1_CTRL) },
+	{ PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH1_ADDR) },
+	{ PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH1_RANK) },
+	{ PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH1_TC)   },
+
+		/* Channel 2 */
+	{ PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH2_CTRL) },
+	{ PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR) },
+	{ PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK) },
+	{ PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC)   },
+
+		/* Generic Non-core registers */
+	/*
+	 * This is the PCI device on i7core and on Xeon 35xx (8086:2c41)
+	 * On Xeon 55xx, however, it has a different id (8086:2c40). So,
+	 * the probing code needs to test for the other address in case of
+	 * failure of this one
+	 */
+	{ PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_I7_NONCORE)  },
+
+};
+
+static const struct pci_id_descr pci_dev_descr_lynnfield[] = {
+	{ PCI_DESCR( 3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR)         },
+	{ PCI_DESCR( 3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD)      },
+	{ PCI_DESCR( 3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST)     },
+
+	{ PCI_DESCR( 4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL) },
+	{ PCI_DESCR( 4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR) },
+	{ PCI_DESCR( 4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK) },
+	{ PCI_DESCR( 4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC)   },
+
+	{ PCI_DESCR( 5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL) },
+	{ PCI_DESCR( 5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR) },
+	{ PCI_DESCR( 5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK) },
+	{ PCI_DESCR( 5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC)   },
+
+	/*
+	 * This is the PCI device has an alternate address on some
+	 * processors like Core i7 860
+	 */
+	{ PCI_DESCR( 0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE)     },
+};
+
+static const struct pci_id_descr pci_dev_descr_i7core_westmere[] = {
+		/* Memory controller */
+	{ PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2)     },
+	{ PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2)  },
+			/* Exists only for RDIMM */
+	{ PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2), .optional = 1  },
+	{ PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2) },
+
+		/* Channel 0 */
+	{ PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2) },
+	{ PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2) },
+	{ PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2) },
+	{ PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2)   },
+
+		/* Channel 1 */
+	{ PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2) },
+	{ PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2) },
+	{ PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2) },
+	{ PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2)   },
+
+		/* Channel 2 */
+	{ PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2) },
+	{ PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2) },
+	{ PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2) },
+	{ PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2)   },
+
+		/* Generic Non-core registers */
+	{ PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2)  },
+
+};
+
+#define PCI_ID_TABLE_ENTRY(A) { .descr=A, .n_devs = ARRAY_SIZE(A) }
+static const struct pci_id_table pci_dev_table[] = {
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_nehalem),
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_lynnfield),
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_westmere),
+	{0,}			/* 0 terminated list. */
+};
+
+/*
+ *	pci_device_id	table for which devices we are looking for
+ */
+static const struct pci_device_id i7core_pci_tbl[] = {
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_X58_HUB_MGMT)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0)},
+	{0,}			/* 0 terminated list. */
+};
+
+/****************************************************************************
+			Ancillary status routines
+ ****************************************************************************/
+
+	/* MC_CONTROL bits */
+#define CH_ACTIVE(pvt, ch)	((pvt)->info.mc_control & (1 << (8 + ch)))
+#define ECCx8(pvt)		((pvt)->info.mc_control & (1 << 1))
+
+	/* MC_STATUS bits */
+#define ECC_ENABLED(pvt)	((pvt)->info.mc_status & (1 << 4))
+#define CH_DISABLED(pvt, ch)	((pvt)->info.mc_status & (1 << ch))
+
+	/* MC_MAX_DOD read functions */
+static inline int numdimms(u32 dimms)
+{
+	return (dimms & 0x3) + 1;
+}
+
+static inline int numrank(u32 rank)
+{
+	static const int ranks[] = { 1, 2, 4, -EINVAL };
+
+	return ranks[rank & 0x3];
+}
+
+static inline int numbank(u32 bank)
+{
+	static const int banks[] = { 4, 8, 16, -EINVAL };
+
+	return banks[bank & 0x3];
+}
+
+static inline int numrow(u32 row)
+{
+	static const int rows[] = {
+		1 << 12, 1 << 13, 1 << 14, 1 << 15,
+		1 << 16, -EINVAL, -EINVAL, -EINVAL,
+	};
+
+	return rows[row & 0x7];
+}
+
+static inline int numcol(u32 col)
+{
+	static const int cols[] = {
+		1 << 10, 1 << 11, 1 << 12, -EINVAL,
+	};
+	return cols[col & 0x3];
+}
+
+static struct i7core_dev *get_i7core_dev(u8 socket)
+{
+	struct i7core_dev *i7core_dev;
+
+	list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
+		if (i7core_dev->socket == socket)
+			return i7core_dev;
+	}
+
+	return NULL;
+}
+
+static struct i7core_dev *alloc_i7core_dev(u8 socket,
+					   const struct pci_id_table *table)
+{
+	struct i7core_dev *i7core_dev;
+
+	i7core_dev = kzalloc(sizeof(*i7core_dev), GFP_KERNEL);
+	if (!i7core_dev)
+		return NULL;
+
+	i7core_dev->pdev = kcalloc(table->n_devs, sizeof(*i7core_dev->pdev),
+				   GFP_KERNEL);
+	if (!i7core_dev->pdev) {
+		kfree(i7core_dev);
+		return NULL;
+	}
+
+	i7core_dev->socket = socket;
+	i7core_dev->n_devs = table->n_devs;
+	list_add_tail(&i7core_dev->list, &i7core_edac_list);
+
+	return i7core_dev;
+}
+
+static void free_i7core_dev(struct i7core_dev *i7core_dev)
+{
+	list_del(&i7core_dev->list);
+	kfree(i7core_dev->pdev);
+	kfree(i7core_dev);
+}
+
+/****************************************************************************
+			Memory check routines
+ ****************************************************************************/
+
+static int get_dimm_config(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	struct pci_dev *pdev;
+	int i, j;
+	enum edac_type mode;
+	enum mem_type mtype;
+	struct dimm_info *dimm;
+
+	/* Get data from the MC register, function 0 */
+	pdev = pvt->pci_mcr[0];
+	if (!pdev)
+		return -ENODEV;
+
+	/* Device 3 function 0 reads */
+	pci_read_config_dword(pdev, MC_CONTROL, &pvt->info.mc_control);
+	pci_read_config_dword(pdev, MC_STATUS, &pvt->info.mc_status);
+	pci_read_config_dword(pdev, MC_MAX_DOD, &pvt->info.max_dod);
+	pci_read_config_dword(pdev, MC_CHANNEL_MAPPER, &pvt->info.ch_map);
+
+	edac_dbg(0, "QPI %d control=0x%08x status=0x%08x dod=0x%08x map=0x%08x\n",
+		 pvt->i7core_dev->socket, pvt->info.mc_control,
+		 pvt->info.mc_status, pvt->info.max_dod, pvt->info.ch_map);
+
+	if (ECC_ENABLED(pvt)) {
+		edac_dbg(0, "ECC enabled with x%d SDCC\n", ECCx8(pvt) ? 8 : 4);
+		if (ECCx8(pvt))
+			mode = EDAC_S8ECD8ED;
+		else
+			mode = EDAC_S4ECD4ED;
+	} else {
+		edac_dbg(0, "ECC disabled\n");
+		mode = EDAC_NONE;
+	}
+
+	/* FIXME: need to handle the error codes */
+	edac_dbg(0, "DOD Max limits: DIMMS: %d, %d-ranked, %d-banked x%x x 0x%x\n",
+		 numdimms(pvt->info.max_dod),
+		 numrank(pvt->info.max_dod >> 2),
+		 numbank(pvt->info.max_dod >> 4),
+		 numrow(pvt->info.max_dod >> 6),
+		 numcol(pvt->info.max_dod >> 9));
+
+	for (i = 0; i < NUM_CHANS; i++) {
+		u32 data, dimm_dod[3], value[8];
+
+		if (!pvt->pci_ch[i][0])
+			continue;
+
+		if (!CH_ACTIVE(pvt, i)) {
+			edac_dbg(0, "Channel %i is not active\n", i);
+			continue;
+		}
+		if (CH_DISABLED(pvt, i)) {
+			edac_dbg(0, "Channel %i is disabled\n", i);
+			continue;
+		}
+
+		/* Devices 4-6 function 0 */
+		pci_read_config_dword(pvt->pci_ch[i][0],
+				MC_CHANNEL_DIMM_INIT_PARAMS, &data);
+
+
+		if (data & THREE_DIMMS_PRESENT)
+			pvt->channel[i].is_3dimms_present = true;
+
+		if (data & SINGLE_QUAD_RANK_PRESENT)
+			pvt->channel[i].is_single_4rank = true;
+
+		if (data & QUAD_RANK_PRESENT)
+			pvt->channel[i].has_4rank = true;
+
+		if (data & REGISTERED_DIMM)
+			mtype = MEM_RDDR3;
+		else
+			mtype = MEM_DDR3;
+
+		/* Devices 4-6 function 1 */
+		pci_read_config_dword(pvt->pci_ch[i][1],
+				MC_DOD_CH_DIMM0, &dimm_dod[0]);
+		pci_read_config_dword(pvt->pci_ch[i][1],
+				MC_DOD_CH_DIMM1, &dimm_dod[1]);
+		pci_read_config_dword(pvt->pci_ch[i][1],
+				MC_DOD_CH_DIMM2, &dimm_dod[2]);
+
+		edac_dbg(0, "Ch%d phy rd%d, wr%d (0x%08x): %s%s%s%cDIMMs\n",
+			 i,
+			 RDLCH(pvt->info.ch_map, i), WRLCH(pvt->info.ch_map, i),
+			 data,
+			 pvt->channel[i].is_3dimms_present ? "3DIMMS " : "",
+			 pvt->channel[i].is_3dimms_present ? "SINGLE_4R " : "",
+			 pvt->channel[i].has_4rank ? "HAS_4R " : "",
+			 (data & REGISTERED_DIMM) ? 'R' : 'U');
+
+		for (j = 0; j < 3; j++) {
+			u32 banks, ranks, rows, cols;
+			u32 size, npages;
+
+			if (!DIMM_PRESENT(dimm_dod[j]))
+				continue;
+
+			dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers,
+				       i, j, 0);
+			banks = numbank(MC_DOD_NUMBANK(dimm_dod[j]));
+			ranks = numrank(MC_DOD_NUMRANK(dimm_dod[j]));
+			rows = numrow(MC_DOD_NUMROW(dimm_dod[j]));
+			cols = numcol(MC_DOD_NUMCOL(dimm_dod[j]));
+
+			/* DDR3 has 8 I/O banks */
+			size = (rows * cols * banks * ranks) >> (20 - 3);
+
+			edac_dbg(0, "\tdimm %d %d MiB offset: %x, bank: %d, rank: %d, row: %#x, col: %#x\n",
+				 j, size,
+				 RANKOFFSET(dimm_dod[j]),
+				 banks, ranks, rows, cols);
+
+			npages = MiB_TO_PAGES(size);
+
+			dimm->nr_pages = npages;
+
+			switch (banks) {
+			case 4:
+				dimm->dtype = DEV_X4;
+				break;
+			case 8:
+				dimm->dtype = DEV_X8;
+				break;
+			case 16:
+				dimm->dtype = DEV_X16;
+				break;
+			default:
+				dimm->dtype = DEV_UNKNOWN;
+			}
+
+			snprintf(dimm->label, sizeof(dimm->label),
+				 "CPU#%uChannel#%u_DIMM#%u",
+				 pvt->i7core_dev->socket, i, j);
+			dimm->grain = 8;
+			dimm->edac_mode = mode;
+			dimm->mtype = mtype;
+		}
+
+		pci_read_config_dword(pdev, MC_SAG_CH_0, &value[0]);
+		pci_read_config_dword(pdev, MC_SAG_CH_1, &value[1]);
+		pci_read_config_dword(pdev, MC_SAG_CH_2, &value[2]);
+		pci_read_config_dword(pdev, MC_SAG_CH_3, &value[3]);
+		pci_read_config_dword(pdev, MC_SAG_CH_4, &value[4]);
+		pci_read_config_dword(pdev, MC_SAG_CH_5, &value[5]);
+		pci_read_config_dword(pdev, MC_SAG_CH_6, &value[6]);
+		pci_read_config_dword(pdev, MC_SAG_CH_7, &value[7]);
+		edac_dbg(1, "\t[%i] DIVBY3\tREMOVED\tOFFSET\n", i);
+		for (j = 0; j < 8; j++)
+			edac_dbg(1, "\t\t%#x\t%#x\t%#x\n",
+				 (value[j] >> 27) & 0x1,
+				 (value[j] >> 24) & 0x7,
+				 (value[j] & ((1 << 24) - 1)));
+	}
+
+	return 0;
+}
+
+/****************************************************************************
+			Error insertion routines
+ ****************************************************************************/
+
+#define to_mci(k) container_of(k, struct mem_ctl_info, dev)
+
+/* The i7core has independent error injection features per channel.
+   However, to have a simpler code, we don't allow enabling error injection
+   on more than one channel.
+   Also, since a change at an inject parameter will be applied only at enable,
+   we're disabling error injection on all write calls to the sysfs nodes that
+   controls the error code injection.
+ */
+static int disable_inject(const struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+
+	pvt->inject.enable = 0;
+
+	if (!pvt->pci_ch[pvt->inject.channel][0])
+		return -ENODEV;
+
+	pci_write_config_dword(pvt->pci_ch[pvt->inject.channel][0],
+				MC_CHANNEL_ERROR_INJECT, 0);
+
+	return 0;
+}
+
+/*
+ * i7core inject inject.section
+ *
+ *	accept and store error injection inject.section value
+ *	bit 0 - refers to the lower 32-byte half cacheline
+ *	bit 1 - refers to the upper 32-byte half cacheline
+ */
+static ssize_t i7core_inject_section_store(struct device *dev,
+					   struct device_attribute *mattr,
+					   const char *data, size_t count)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct i7core_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int rc;
+
+	if (pvt->inject.enable)
+		disable_inject(mci);
+
+	rc = kstrtoul(data, 10, &value);
+	if ((rc < 0) || (value > 3))
+		return -EIO;
+
+	pvt->inject.section = (u32) value;
+	return count;
+}
+
+static ssize_t i7core_inject_section_show(struct device *dev,
+					  struct device_attribute *mattr,
+					  char *data)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct i7core_pvt *pvt = mci->pvt_info;
+	return sprintf(data, "0x%08x\n", pvt->inject.section);
+}
+
+/*
+ * i7core inject.type
+ *
+ *	accept and store error injection inject.section value
+ *	bit 0 - repeat enable - Enable error repetition
+ *	bit 1 - inject ECC error
+ *	bit 2 - inject parity error
+ */
+static ssize_t i7core_inject_type_store(struct device *dev,
+					struct device_attribute *mattr,
+					const char *data, size_t count)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+struct i7core_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int rc;
+
+	if (pvt->inject.enable)
+		disable_inject(mci);
+
+	rc = kstrtoul(data, 10, &value);
+	if ((rc < 0) || (value > 7))
+		return -EIO;
+
+	pvt->inject.type = (u32) value;
+	return count;
+}
+
+static ssize_t i7core_inject_type_show(struct device *dev,
+				       struct device_attribute *mattr,
+				       char *data)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct i7core_pvt *pvt = mci->pvt_info;
+
+	return sprintf(data, "0x%08x\n", pvt->inject.type);
+}
+
+/*
+ * i7core_inject_inject.eccmask_store
+ *
+ * The type of error (UE/CE) will depend on the inject.eccmask value:
+ *   Any bits set to a 1 will flip the corresponding ECC bit
+ *   Correctable errors can be injected by flipping 1 bit or the bits within
+ *   a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or
+ *   23:16 and 31:24). Flipping bits in two symbol pairs will cause an
+ *   uncorrectable error to be injected.
+ */
+static ssize_t i7core_inject_eccmask_store(struct device *dev,
+					   struct device_attribute *mattr,
+					   const char *data, size_t count)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct i7core_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int rc;
+
+	if (pvt->inject.enable)
+		disable_inject(mci);
+
+	rc = kstrtoul(data, 10, &value);
+	if (rc < 0)
+		return -EIO;
+
+	pvt->inject.eccmask = (u32) value;
+	return count;
+}
+
+static ssize_t i7core_inject_eccmask_show(struct device *dev,
+					  struct device_attribute *mattr,
+					  char *data)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct i7core_pvt *pvt = mci->pvt_info;
+
+	return sprintf(data, "0x%08x\n", pvt->inject.eccmask);
+}
+
+/*
+ * i7core_addrmatch
+ *
+ * The type of error (UE/CE) will depend on the inject.eccmask value:
+ *   Any bits set to a 1 will flip the corresponding ECC bit
+ *   Correctable errors can be injected by flipping 1 bit or the bits within
+ *   a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or
+ *   23:16 and 31:24). Flipping bits in two symbol pairs will cause an
+ *   uncorrectable error to be injected.
+ */
+
+#define DECLARE_ADDR_MATCH(param, limit)			\
+static ssize_t i7core_inject_store_##param(			\
+	struct device *dev,					\
+	struct device_attribute *mattr,				\
+	const char *data, size_t count)				\
+{								\
+	struct mem_ctl_info *mci = dev_get_drvdata(dev);	\
+	struct i7core_pvt *pvt;					\
+	long value;						\
+	int rc;							\
+								\
+	edac_dbg(1, "\n");					\
+	pvt = mci->pvt_info;					\
+								\
+	if (pvt->inject.enable)					\
+		disable_inject(mci);				\
+								\
+	if (!strcasecmp(data, "any") || !strcasecmp(data, "any\n"))\
+		value = -1;					\
+	else {							\
+		rc = kstrtoul(data, 10, &value);		\
+		if ((rc < 0) || (value >= limit))		\
+			return -EIO;				\
+	}							\
+								\
+	pvt->inject.param = value;				\
+								\
+	return count;						\
+}								\
+								\
+static ssize_t i7core_inject_show_##param(			\
+	struct device *dev,					\
+	struct device_attribute *mattr,				\
+	char *data)						\
+{								\
+	struct mem_ctl_info *mci = dev_get_drvdata(dev);	\
+	struct i7core_pvt *pvt;					\
+								\
+	pvt = mci->pvt_info;					\
+	edac_dbg(1, "pvt=%p\n", pvt);				\
+	if (pvt->inject.param < 0)				\
+		return sprintf(data, "any\n");			\
+	else							\
+		return sprintf(data, "%d\n", pvt->inject.param);\
+}
+
+#define ATTR_ADDR_MATCH(param)					\
+	static DEVICE_ATTR(param, S_IRUGO | S_IWUSR,		\
+		    i7core_inject_show_##param,			\
+		    i7core_inject_store_##param)
+
+DECLARE_ADDR_MATCH(channel, 3);
+DECLARE_ADDR_MATCH(dimm, 3);
+DECLARE_ADDR_MATCH(rank, 4);
+DECLARE_ADDR_MATCH(bank, 32);
+DECLARE_ADDR_MATCH(page, 0x10000);
+DECLARE_ADDR_MATCH(col, 0x4000);
+
+ATTR_ADDR_MATCH(channel);
+ATTR_ADDR_MATCH(dimm);
+ATTR_ADDR_MATCH(rank);
+ATTR_ADDR_MATCH(bank);
+ATTR_ADDR_MATCH(page);
+ATTR_ADDR_MATCH(col);
+
+static int write_and_test(struct pci_dev *dev, const int where, const u32 val)
+{
+	u32 read;
+	int count;
+
+	edac_dbg(0, "setting pci %02x:%02x.%x reg=%02x value=%08x\n",
+		 dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
+		 where, val);
+
+	for (count = 0; count < 10; count++) {
+		if (count)
+			msleep(100);
+		pci_write_config_dword(dev, where, val);
+		pci_read_config_dword(dev, where, &read);
+
+		if (read == val)
+			return 0;
+	}
+
+	i7core_printk(KERN_ERR, "Error during set pci %02x:%02x.%x reg=%02x "
+		"write=%08x. Read=%08x\n",
+		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
+		where, val, read);
+
+	return -EINVAL;
+}
+
+/*
+ * This routine prepares the Memory Controller for error injection.
+ * The error will be injected when some process tries to write to the
+ * memory that matches the given criteria.
+ * The criteria can be set in terms of a mask where dimm, rank, bank, page
+ * and col can be specified.
+ * A -1 value for any of the mask items will make the MCU to ignore
+ * that matching criteria for error injection.
+ *
+ * It should be noticed that the error will only happen after a write operation
+ * on a memory that matches the condition. if REPEAT_EN is not enabled at
+ * inject mask, then it will produce just one error. Otherwise, it will repeat
+ * until the injectmask would be cleaned.
+ *
+ * FIXME: This routine assumes that MAXNUMDIMMS value of MC_MAX_DOD
+ *    is reliable enough to check if the MC is using the
+ *    three channels. However, this is not clear at the datasheet.
+ */
+static ssize_t i7core_inject_enable_store(struct device *dev,
+					  struct device_attribute *mattr,
+					  const char *data, size_t count)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 injectmask;
+	u64 mask = 0;
+	int  rc;
+	long enable;
+
+	if (!pvt->pci_ch[pvt->inject.channel][0])
+		return 0;
+
+	rc = kstrtoul(data, 10, &enable);
+	if ((rc < 0))
+		return 0;
+
+	if (enable) {
+		pvt->inject.enable = 1;
+	} else {
+		disable_inject(mci);
+		return count;
+	}
+
+	/* Sets pvt->inject.dimm mask */
+	if (pvt->inject.dimm < 0)
+		mask |= 1LL << 41;
+	else {
+		if (pvt->channel[pvt->inject.channel].dimms > 2)
+			mask |= (pvt->inject.dimm & 0x3LL) << 35;
+		else
+			mask |= (pvt->inject.dimm & 0x1LL) << 36;
+	}
+
+	/* Sets pvt->inject.rank mask */
+	if (pvt->inject.rank < 0)
+		mask |= 1LL << 40;
+	else {
+		if (pvt->channel[pvt->inject.channel].dimms > 2)
+			mask |= (pvt->inject.rank & 0x1LL) << 34;
+		else
+			mask |= (pvt->inject.rank & 0x3LL) << 34;
+	}
+
+	/* Sets pvt->inject.bank mask */
+	if (pvt->inject.bank < 0)
+		mask |= 1LL << 39;
+	else
+		mask |= (pvt->inject.bank & 0x15LL) << 30;
+
+	/* Sets pvt->inject.page mask */
+	if (pvt->inject.page < 0)
+		mask |= 1LL << 38;
+	else
+		mask |= (pvt->inject.page & 0xffff) << 14;
+
+	/* Sets pvt->inject.column mask */
+	if (pvt->inject.col < 0)
+		mask |= 1LL << 37;
+	else
+		mask |= (pvt->inject.col & 0x3fff);
+
+	/*
+	 * bit    0: REPEAT_EN
+	 * bits 1-2: MASK_HALF_CACHELINE
+	 * bit    3: INJECT_ECC
+	 * bit    4: INJECT_ADDR_PARITY
+	 */
+
+	injectmask = (pvt->inject.type & 1) |
+		     (pvt->inject.section & 0x3) << 1 |
+		     (pvt->inject.type & 0x6) << (3 - 1);
+
+	/* Unlock writes to registers - this register is write only */
+	pci_write_config_dword(pvt->pci_noncore,
+			       MC_CFG_CONTROL, 0x2);
+
+	write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+			       MC_CHANNEL_ADDR_MATCH, mask);
+	write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+			       MC_CHANNEL_ADDR_MATCH + 4, mask >> 32L);
+
+	write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+			       MC_CHANNEL_ERROR_MASK, pvt->inject.eccmask);
+
+	write_and_test(pvt->pci_ch[pvt->inject.channel][0],
+			       MC_CHANNEL_ERROR_INJECT, injectmask);
+
+	/*
+	 * This is something undocumented, based on my tests
+	 * Without writing 8 to this register, errors aren't injected. Not sure
+	 * why.
+	 */
+	pci_write_config_dword(pvt->pci_noncore,
+			       MC_CFG_CONTROL, 8);
+
+	edac_dbg(0, "Error inject addr match 0x%016llx, ecc 0x%08x, inject 0x%08x\n",
+		 mask, pvt->inject.eccmask, injectmask);
+
+
+	return count;
+}
+
+static ssize_t i7core_inject_enable_show(struct device *dev,
+					 struct device_attribute *mattr,
+					 char *data)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 injectmask;
+
+	if (!pvt->pci_ch[pvt->inject.channel][0])
+		return 0;
+
+	pci_read_config_dword(pvt->pci_ch[pvt->inject.channel][0],
+			       MC_CHANNEL_ERROR_INJECT, &injectmask);
+
+	edac_dbg(0, "Inject error read: 0x%018x\n", injectmask);
+
+	if (injectmask & 0x0c)
+		pvt->inject.enable = 1;
+
+	return sprintf(data, "%d\n", pvt->inject.enable);
+}
+
+#define DECLARE_COUNTER(param)					\
+static ssize_t i7core_show_counter_##param(			\
+	struct device *dev,					\
+	struct device_attribute *mattr,				\
+	char *data)						\
+{								\
+	struct mem_ctl_info *mci = dev_get_drvdata(dev);	\
+	struct i7core_pvt *pvt = mci->pvt_info;			\
+								\
+	edac_dbg(1, "\n");					\
+	if (!pvt->ce_count_available || (pvt->is_registered))	\
+		return sprintf(data, "data unavailable\n");	\
+	return sprintf(data, "%lu\n",				\
+			pvt->udimm_ce_count[param]);		\
+}
+
+#define ATTR_COUNTER(param)					\
+	static DEVICE_ATTR(udimm##param, S_IRUGO | S_IWUSR,	\
+		    i7core_show_counter_##param,		\
+		    NULL)
+
+DECLARE_COUNTER(0);
+DECLARE_COUNTER(1);
+DECLARE_COUNTER(2);
+
+ATTR_COUNTER(0);
+ATTR_COUNTER(1);
+ATTR_COUNTER(2);
+
+/*
+ * inject_addrmatch device sysfs struct
+ */
+
+static struct attribute *i7core_addrmatch_attrs[] = {
+	&dev_attr_channel.attr,
+	&dev_attr_dimm.attr,
+	&dev_attr_rank.attr,
+	&dev_attr_bank.attr,
+	&dev_attr_page.attr,
+	&dev_attr_col.attr,
+	NULL
+};
+
+static const struct attribute_group addrmatch_grp = {
+	.attrs	= i7core_addrmatch_attrs,
+};
+
+static const struct attribute_group *addrmatch_groups[] = {
+	&addrmatch_grp,
+	NULL
+};
+
+static void addrmatch_release(struct device *device)
+{
+	edac_dbg(1, "Releasing device %s\n", dev_name(device));
+	kfree(device);
+}
+
+static const struct device_type addrmatch_type = {
+	.groups		= addrmatch_groups,
+	.release	= addrmatch_release,
+};
+
+/*
+ * all_channel_counts sysfs struct
+ */
+
+static struct attribute *i7core_udimm_counters_attrs[] = {
+	&dev_attr_udimm0.attr,
+	&dev_attr_udimm1.attr,
+	&dev_attr_udimm2.attr,
+	NULL
+};
+
+static const struct attribute_group all_channel_counts_grp = {
+	.attrs	= i7core_udimm_counters_attrs,
+};
+
+static const struct attribute_group *all_channel_counts_groups[] = {
+	&all_channel_counts_grp,
+	NULL
+};
+
+static void all_channel_counts_release(struct device *device)
+{
+	edac_dbg(1, "Releasing device %s\n", dev_name(device));
+	kfree(device);
+}
+
+static const struct device_type all_channel_counts_type = {
+	.groups		= all_channel_counts_groups,
+	.release	= all_channel_counts_release,
+};
+
+/*
+ * inject sysfs attributes
+ */
+
+static DEVICE_ATTR(inject_section, S_IRUGO | S_IWUSR,
+		   i7core_inject_section_show, i7core_inject_section_store);
+
+static DEVICE_ATTR(inject_type, S_IRUGO | S_IWUSR,
+		   i7core_inject_type_show, i7core_inject_type_store);
+
+
+static DEVICE_ATTR(inject_eccmask, S_IRUGO | S_IWUSR,
+		   i7core_inject_eccmask_show, i7core_inject_eccmask_store);
+
+static DEVICE_ATTR(inject_enable, S_IRUGO | S_IWUSR,
+		   i7core_inject_enable_show, i7core_inject_enable_store);
+
+static struct attribute *i7core_dev_attrs[] = {
+	&dev_attr_inject_section.attr,
+	&dev_attr_inject_type.attr,
+	&dev_attr_inject_eccmask.attr,
+	&dev_attr_inject_enable.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(i7core_dev);
+
+static int i7core_create_sysfs_devices(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	int rc;
+
+	pvt->addrmatch_dev = kzalloc(sizeof(*pvt->addrmatch_dev), GFP_KERNEL);
+	if (!pvt->addrmatch_dev)
+		return -ENOMEM;
+
+	pvt->addrmatch_dev->type = &addrmatch_type;
+	pvt->addrmatch_dev->bus = mci->dev.bus;
+	device_initialize(pvt->addrmatch_dev);
+	pvt->addrmatch_dev->parent = &mci->dev;
+	dev_set_name(pvt->addrmatch_dev, "inject_addrmatch");
+	dev_set_drvdata(pvt->addrmatch_dev, mci);
+
+	edac_dbg(1, "creating %s\n", dev_name(pvt->addrmatch_dev));
+
+	rc = device_add(pvt->addrmatch_dev);
+	if (rc < 0)
+		goto err_put_addrmatch;
+
+	if (!pvt->is_registered) {
+		pvt->chancounts_dev = kzalloc(sizeof(*pvt->chancounts_dev),
+					      GFP_KERNEL);
+		if (!pvt->chancounts_dev) {
+			rc = -ENOMEM;
+			goto err_del_addrmatch;
+		}
+
+		pvt->chancounts_dev->type = &all_channel_counts_type;
+		pvt->chancounts_dev->bus = mci->dev.bus;
+		device_initialize(pvt->chancounts_dev);
+		pvt->chancounts_dev->parent = &mci->dev;
+		dev_set_name(pvt->chancounts_dev, "all_channel_counts");
+		dev_set_drvdata(pvt->chancounts_dev, mci);
+
+		edac_dbg(1, "creating %s\n", dev_name(pvt->chancounts_dev));
+
+		rc = device_add(pvt->chancounts_dev);
+		if (rc < 0)
+			goto err_put_chancounts;
+	}
+	return 0;
+
+err_put_chancounts:
+	put_device(pvt->chancounts_dev);
+err_del_addrmatch:
+	device_del(pvt->addrmatch_dev);
+err_put_addrmatch:
+	put_device(pvt->addrmatch_dev);
+
+	return rc;
+}
+
+static void i7core_delete_sysfs_devices(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+
+	edac_dbg(1, "\n");
+
+	if (!pvt->is_registered) {
+		device_del(pvt->chancounts_dev);
+		put_device(pvt->chancounts_dev);
+	}
+	device_del(pvt->addrmatch_dev);
+	put_device(pvt->addrmatch_dev);
+}
+
+/****************************************************************************
+	Device initialization routines: put/get, init/exit
+ ****************************************************************************/
+
+/*
+ *	i7core_put_all_devices	'put' all the devices that we have
+ *				reserved via 'get'
+ */
+static void i7core_put_devices(struct i7core_dev *i7core_dev)
+{
+	int i;
+
+	edac_dbg(0, "\n");
+	for (i = 0; i < i7core_dev->n_devs; i++) {
+		struct pci_dev *pdev = i7core_dev->pdev[i];
+		if (!pdev)
+			continue;
+		edac_dbg(0, "Removing dev %02x:%02x.%d\n",
+			 pdev->bus->number,
+			 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+		pci_dev_put(pdev);
+	}
+}
+
+static void i7core_put_all_devices(void)
+{
+	struct i7core_dev *i7core_dev, *tmp;
+
+	list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list) {
+		i7core_put_devices(i7core_dev);
+		free_i7core_dev(i7core_dev);
+	}
+}
+
+static void __init i7core_xeon_pci_fixup(const struct pci_id_table *table)
+{
+	struct pci_dev *pdev = NULL;
+	int i;
+
+	/*
+	 * On Xeon 55xx, the Intel Quick Path Arch Generic Non-core pci buses
+	 * aren't announced by acpi. So, we need to use a legacy scan probing
+	 * to detect them
+	 */
+	while (table && table->descr) {
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, table->descr[0].dev_id, NULL);
+		if (unlikely(!pdev)) {
+			for (i = 0; i < MAX_SOCKET_BUSES; i++)
+				pcibios_scan_specific_bus(255-i);
+		}
+		pci_dev_put(pdev);
+		table++;
+	}
+}
+
+static unsigned i7core_pci_lastbus(void)
+{
+	int last_bus = 0, bus;
+	struct pci_bus *b = NULL;
+
+	while ((b = pci_find_next_bus(b)) != NULL) {
+		bus = b->number;
+		edac_dbg(0, "Found bus %d\n", bus);
+		if (bus > last_bus)
+			last_bus = bus;
+	}
+
+	edac_dbg(0, "Last bus %d\n", last_bus);
+
+	return last_bus;
+}
+
+/*
+ *	i7core_get_all_devices	Find and perform 'get' operation on the MCH's
+ *			device/functions we want to reference for this driver
+ *
+ *			Need to 'get' device 16 func 1 and func 2
+ */
+static int i7core_get_onedevice(struct pci_dev **prev,
+				const struct pci_id_table *table,
+				const unsigned devno,
+				const unsigned last_bus)
+{
+	struct i7core_dev *i7core_dev;
+	const struct pci_id_descr *dev_descr = &table->descr[devno];
+
+	struct pci_dev *pdev = NULL;
+	u8 bus = 0;
+	u8 socket = 0;
+
+	pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+			      dev_descr->dev_id, *prev);
+
+	/*
+	 * On Xeon 55xx, the Intel QuickPath Arch Generic Non-core regs
+	 * is at addr 8086:2c40, instead of 8086:2c41. So, we need
+	 * to probe for the alternate address in case of failure
+	 */
+	if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_I7_NONCORE && !pdev) {
+		pci_dev_get(*prev);	/* pci_get_device will put it */
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				      PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT, *prev);
+	}
+
+	if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE &&
+	    !pdev) {
+		pci_dev_get(*prev);	/* pci_get_device will put it */
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				      PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT,
+				      *prev);
+	}
+
+	if (!pdev) {
+		if (*prev) {
+			*prev = pdev;
+			return 0;
+		}
+
+		if (dev_descr->optional)
+			return 0;
+
+		if (devno == 0)
+			return -ENODEV;
+
+		i7core_printk(KERN_INFO,
+			"Device not found: dev %02x.%d PCI ID %04x:%04x\n",
+			dev_descr->dev, dev_descr->func,
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+		/* End of list, leave */
+		return -ENODEV;
+	}
+	bus = pdev->bus->number;
+
+	socket = last_bus - bus;
+
+	i7core_dev = get_i7core_dev(socket);
+	if (!i7core_dev) {
+		i7core_dev = alloc_i7core_dev(socket, table);
+		if (!i7core_dev) {
+			pci_dev_put(pdev);
+			return -ENOMEM;
+		}
+	}
+
+	if (i7core_dev->pdev[devno]) {
+		i7core_printk(KERN_ERR,
+			"Duplicated device for "
+			"dev %02x:%02x.%d PCI ID %04x:%04x\n",
+			bus, dev_descr->dev, dev_descr->func,
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+		pci_dev_put(pdev);
+		return -ENODEV;
+	}
+
+	i7core_dev->pdev[devno] = pdev;
+
+	/* Sanity check */
+	if (unlikely(PCI_SLOT(pdev->devfn) != dev_descr->dev ||
+			PCI_FUNC(pdev->devfn) != dev_descr->func)) {
+		i7core_printk(KERN_ERR,
+			"Device PCI ID %04x:%04x "
+			"has dev %02x:%02x.%d instead of dev %02x:%02x.%d\n",
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id,
+			bus, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+			bus, dev_descr->dev, dev_descr->func);
+		return -ENODEV;
+	}
+
+	/* Be sure that the device is enabled */
+	if (unlikely(pci_enable_device(pdev) < 0)) {
+		i7core_printk(KERN_ERR,
+			"Couldn't enable "
+			"dev %02x:%02x.%d PCI ID %04x:%04x\n",
+			bus, dev_descr->dev, dev_descr->func,
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+		return -ENODEV;
+	}
+
+	edac_dbg(0, "Detected socket %d dev %02x:%02x.%d PCI ID %04x:%04x\n",
+		 socket, bus, dev_descr->dev,
+		 dev_descr->func,
+		 PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+	/*
+	 * As stated on drivers/pci/search.c, the reference count for
+	 * @from is always decremented if it is not %NULL. So, as we need
+	 * to get all devices up to null, we need to do a get for the device
+	 */
+	pci_dev_get(pdev);
+
+	*prev = pdev;
+
+	return 0;
+}
+
+static int i7core_get_all_devices(void)
+{
+	int i, rc, last_bus;
+	struct pci_dev *pdev = NULL;
+	const struct pci_id_table *table = pci_dev_table;
+
+	last_bus = i7core_pci_lastbus();
+
+	while (table && table->descr) {
+		for (i = 0; i < table->n_devs; i++) {
+			pdev = NULL;
+			do {
+				rc = i7core_get_onedevice(&pdev, table, i,
+							  last_bus);
+				if (rc < 0) {
+					if (i == 0) {
+						i = table->n_devs;
+						break;
+					}
+					i7core_put_all_devices();
+					return -ENODEV;
+				}
+			} while (pdev);
+		}
+		table++;
+	}
+
+	return 0;
+}
+
+static int mci_bind_devs(struct mem_ctl_info *mci,
+			 struct i7core_dev *i7core_dev)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	struct pci_dev *pdev;
+	int i, func, slot;
+	char *family;
+
+	pvt->is_registered = false;
+	pvt->enable_scrub  = false;
+	for (i = 0; i < i7core_dev->n_devs; i++) {
+		pdev = i7core_dev->pdev[i];
+		if (!pdev)
+			continue;
+
+		func = PCI_FUNC(pdev->devfn);
+		slot = PCI_SLOT(pdev->devfn);
+		if (slot == 3) {
+			if (unlikely(func > MAX_MCR_FUNC))
+				goto error;
+			pvt->pci_mcr[func] = pdev;
+		} else if (likely(slot >= 4 && slot < 4 + NUM_CHANS)) {
+			if (unlikely(func > MAX_CHAN_FUNC))
+				goto error;
+			pvt->pci_ch[slot - 4][func] = pdev;
+		} else if (!slot && !func) {
+			pvt->pci_noncore = pdev;
+
+			/* Detect the processor family */
+			switch (pdev->device) {
+			case PCI_DEVICE_ID_INTEL_I7_NONCORE:
+				family = "Xeon 35xx/ i7core";
+				pvt->enable_scrub = false;
+				break;
+			case PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT:
+				family = "i7-800/i5-700";
+				pvt->enable_scrub = false;
+				break;
+			case PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE:
+				family = "Xeon 34xx";
+				pvt->enable_scrub = false;
+				break;
+			case PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT:
+				family = "Xeon 55xx";
+				pvt->enable_scrub = true;
+				break;
+			case PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2:
+				family = "Xeon 56xx / i7-900";
+				pvt->enable_scrub = true;
+				break;
+			default:
+				family = "unknown";
+				pvt->enable_scrub = false;
+			}
+			edac_dbg(0, "Detected a processor type %s\n", family);
+		} else
+			goto error;
+
+		edac_dbg(0, "Associated fn %d.%d, dev = %p, socket %d\n",
+			 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+			 pdev, i7core_dev->socket);
+
+		if (PCI_SLOT(pdev->devfn) == 3 &&
+			PCI_FUNC(pdev->devfn) == 2)
+			pvt->is_registered = true;
+	}
+
+	return 0;
+
+error:
+	i7core_printk(KERN_ERR, "Device %d, function %d "
+		      "is out of the expected range\n",
+		      slot, func);
+	return -EINVAL;
+}
+
+/****************************************************************************
+			Error check routines
+ ****************************************************************************/
+
+static void i7core_rdimm_update_ce_count(struct mem_ctl_info *mci,
+					 const int chan,
+					 const int new0,
+					 const int new1,
+					 const int new2)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	int add0 = 0, add1 = 0, add2 = 0;
+	/* Updates CE counters if it is not the first time here */
+	if (pvt->ce_count_available) {
+		/* Updates CE counters */
+
+		add2 = new2 - pvt->rdimm_last_ce_count[chan][2];
+		add1 = new1 - pvt->rdimm_last_ce_count[chan][1];
+		add0 = new0 - pvt->rdimm_last_ce_count[chan][0];
+
+		if (add2 < 0)
+			add2 += 0x7fff;
+		pvt->rdimm_ce_count[chan][2] += add2;
+
+		if (add1 < 0)
+			add1 += 0x7fff;
+		pvt->rdimm_ce_count[chan][1] += add1;
+
+		if (add0 < 0)
+			add0 += 0x7fff;
+		pvt->rdimm_ce_count[chan][0] += add0;
+	} else
+		pvt->ce_count_available = 1;
+
+	/* Store the new values */
+	pvt->rdimm_last_ce_count[chan][2] = new2;
+	pvt->rdimm_last_ce_count[chan][1] = new1;
+	pvt->rdimm_last_ce_count[chan][0] = new0;
+
+	/*updated the edac core */
+	if (add0 != 0)
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, add0,
+				     0, 0, 0,
+				     chan, 0, -1, "error", "");
+	if (add1 != 0)
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, add1,
+				     0, 0, 0,
+				     chan, 1, -1, "error", "");
+	if (add2 != 0)
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, add2,
+				     0, 0, 0,
+				     chan, 2, -1, "error", "");
+}
+
+static void i7core_rdimm_check_mc_ecc_err(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 rcv[3][2];
+	int i, new0, new1, new2;
+
+	/*Read DEV 3: FUN 2:  MC_COR_ECC_CNT regs directly*/
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_0,
+								&rcv[0][0]);
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_1,
+								&rcv[0][1]);
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_2,
+								&rcv[1][0]);
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_3,
+								&rcv[1][1]);
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_4,
+								&rcv[2][0]);
+	pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_5,
+								&rcv[2][1]);
+	for (i = 0 ; i < 3; i++) {
+		edac_dbg(3, "MC_COR_ECC_CNT%d = 0x%x; MC_COR_ECC_CNT%d = 0x%x\n",
+			 (i * 2), rcv[i][0], (i * 2) + 1, rcv[i][1]);
+		/*if the channel has 3 dimms*/
+		if (pvt->channel[i].dimms > 2) {
+			new0 = DIMM_BOT_COR_ERR(rcv[i][0]);
+			new1 = DIMM_TOP_COR_ERR(rcv[i][0]);
+			new2 = DIMM_BOT_COR_ERR(rcv[i][1]);
+		} else {
+			new0 = DIMM_TOP_COR_ERR(rcv[i][0]) +
+					DIMM_BOT_COR_ERR(rcv[i][0]);
+			new1 = DIMM_TOP_COR_ERR(rcv[i][1]) +
+					DIMM_BOT_COR_ERR(rcv[i][1]);
+			new2 = 0;
+		}
+
+		i7core_rdimm_update_ce_count(mci, i, new0, new1, new2);
+	}
+}
+
+/* This function is based on the device 3 function 4 registers as described on:
+ * Intel Xeon Processor 5500 Series Datasheet Volume 2
+ *	http://www.intel.com/Assets/PDF/datasheet/321322.pdf
+ * also available at:
+ * 	http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
+ */
+static void i7core_udimm_check_mc_ecc_err(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 rcv1, rcv0;
+	int new0, new1, new2;
+
+	if (!pvt->pci_mcr[4]) {
+		edac_dbg(0, "MCR registers not found\n");
+		return;
+	}
+
+	/* Corrected test errors */
+	pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV1, &rcv1);
+	pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV0, &rcv0);
+
+	/* Store the new values */
+	new2 = DIMM2_COR_ERR(rcv1);
+	new1 = DIMM1_COR_ERR(rcv0);
+	new0 = DIMM0_COR_ERR(rcv0);
+
+	/* Updates CE counters if it is not the first time here */
+	if (pvt->ce_count_available) {
+		/* Updates CE counters */
+		int add0, add1, add2;
+
+		add2 = new2 - pvt->udimm_last_ce_count[2];
+		add1 = new1 - pvt->udimm_last_ce_count[1];
+		add0 = new0 - pvt->udimm_last_ce_count[0];
+
+		if (add2 < 0)
+			add2 += 0x7fff;
+		pvt->udimm_ce_count[2] += add2;
+
+		if (add1 < 0)
+			add1 += 0x7fff;
+		pvt->udimm_ce_count[1] += add1;
+
+		if (add0 < 0)
+			add0 += 0x7fff;
+		pvt->udimm_ce_count[0] += add0;
+
+		if (add0 | add1 | add2)
+			i7core_printk(KERN_ERR, "New Corrected error(s): "
+				      "dimm0: +%d, dimm1: +%d, dimm2 +%d\n",
+				      add0, add1, add2);
+	} else
+		pvt->ce_count_available = 1;
+
+	/* Store the new values */
+	pvt->udimm_last_ce_count[2] = new2;
+	pvt->udimm_last_ce_count[1] = new1;
+	pvt->udimm_last_ce_count[0] = new0;
+}
+
+/*
+ * According with tables E-11 and E-12 of chapter E.3.3 of Intel 64 and IA-32
+ * Architectures Software Developer’s Manual Volume 3B.
+ * Nehalem are defined as family 0x06, model 0x1a
+ *
+ * The MCA registers used here are the following ones:
+ *     struct mce field	MCA Register
+ *     m->status	MSR_IA32_MC8_STATUS
+ *     m->addr		MSR_IA32_MC8_ADDR
+ *     m->misc		MSR_IA32_MC8_MISC
+ * In the case of Nehalem, the error information is masked at .status and .misc
+ * fields
+ */
+static void i7core_mce_output_error(struct mem_ctl_info *mci,
+				    const struct mce *m)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	char *optype, *err;
+	enum hw_event_mc_err_type tp_event;
+	unsigned long error = m->status & 0x1ff0000l;
+	bool uncorrected_error = m->mcgstatus & 1ll << 61;
+	bool ripv = m->mcgstatus & 1;
+	u32 optypenum = (m->status >> 4) & 0x07;
+	u32 core_err_cnt = (m->status >> 38) & 0x7fff;
+	u32 dimm = (m->misc >> 16) & 0x3;
+	u32 channel = (m->misc >> 18) & 0x3;
+	u32 syndrome = m->misc >> 32;
+	u32 errnum = find_first_bit(&error, 32);
+
+	if (uncorrected_error) {
+		core_err_cnt = 1;
+		if (ripv)
+			tp_event = HW_EVENT_ERR_FATAL;
+		else
+			tp_event = HW_EVENT_ERR_UNCORRECTED;
+	} else {
+		tp_event = HW_EVENT_ERR_CORRECTED;
+	}
+
+	switch (optypenum) {
+	case 0:
+		optype = "generic undef request";
+		break;
+	case 1:
+		optype = "read error";
+		break;
+	case 2:
+		optype = "write error";
+		break;
+	case 3:
+		optype = "addr/cmd error";
+		break;
+	case 4:
+		optype = "scrubbing error";
+		break;
+	default:
+		optype = "reserved";
+		break;
+	}
+
+	switch (errnum) {
+	case 16:
+		err = "read ECC error";
+		break;
+	case 17:
+		err = "RAS ECC error";
+		break;
+	case 18:
+		err = "write parity error";
+		break;
+	case 19:
+		err = "redundancy loss";
+		break;
+	case 20:
+		err = "reserved";
+		break;
+	case 21:
+		err = "memory range error";
+		break;
+	case 22:
+		err = "RTID out of range";
+		break;
+	case 23:
+		err = "address parity error";
+		break;
+	case 24:
+		err = "byte enable parity error";
+		break;
+	default:
+		err = "unknown";
+	}
+
+	/*
+	 * Call the helper to output message
+	 * FIXME: what to do if core_err_cnt > 1? Currently, it generates
+	 * only one event
+	 */
+	if (uncorrected_error || !pvt->is_registered)
+		edac_mc_handle_error(tp_event, mci, core_err_cnt,
+				     m->addr >> PAGE_SHIFT,
+				     m->addr & ~PAGE_MASK,
+				     syndrome,
+				     channel, dimm, -1,
+				     err, optype);
+}
+
+/*
+ *	i7core_check_error	Retrieve and process errors reported by the
+ *				hardware. Called by the Core module.
+ */
+static void i7core_check_error(struct mem_ctl_info *mci, struct mce *m)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+
+	i7core_mce_output_error(mci, m);
+
+	/*
+	 * Now, let's increment CE error counts
+	 */
+	if (!pvt->is_registered)
+		i7core_udimm_check_mc_ecc_err(mci);
+	else
+		i7core_rdimm_check_mc_ecc_err(mci);
+}
+
+/*
+ * Check that logging is enabled and that this is the right type
+ * of error for us to handle.
+ */
+static int i7core_mce_check_error(struct notifier_block *nb, unsigned long val,
+				  void *data)
+{
+	struct mce *mce = (struct mce *)data;
+	struct i7core_dev *i7_dev;
+	struct mem_ctl_info *mci;
+	struct i7core_pvt *pvt;
+
+	i7_dev = get_i7core_dev(mce->socketid);
+	if (!i7_dev)
+		return NOTIFY_DONE;
+
+	mci = i7_dev->mci;
+	pvt = mci->pvt_info;
+
+	/*
+	 * Just let mcelog handle it if the error is
+	 * outside the memory controller
+	 */
+	if (((mce->status & 0xffff) >> 7) != 1)
+		return NOTIFY_DONE;
+
+	/* Bank 8 registers are the only ones that we know how to handle */
+	if (mce->bank != 8)
+		return NOTIFY_DONE;
+
+	i7core_check_error(mci, mce);
+
+	/* Advise mcelog that the errors were handled */
+	return NOTIFY_STOP;
+}
+
+static struct notifier_block i7_mce_dec = {
+	.notifier_call	= i7core_mce_check_error,
+	.priority	= MCE_PRIO_EDAC,
+};
+
+struct memdev_dmi_entry {
+	u8 type;
+	u8 length;
+	u16 handle;
+	u16 phys_mem_array_handle;
+	u16 mem_err_info_handle;
+	u16 total_width;
+	u16 data_width;
+	u16 size;
+	u8 form;
+	u8 device_set;
+	u8 device_locator;
+	u8 bank_locator;
+	u8 memory_type;
+	u16 type_detail;
+	u16 speed;
+	u8 manufacturer;
+	u8 serial_number;
+	u8 asset_tag;
+	u8 part_number;
+	u8 attributes;
+	u32 extended_size;
+	u16 conf_mem_clk_speed;
+} __attribute__((__packed__));
+
+
+/*
+ * Decode the DRAM Clock Frequency, be paranoid, make sure that all
+ * memory devices show the same speed, and if they don't then consider
+ * all speeds to be invalid.
+ */
+static void decode_dclk(const struct dmi_header *dh, void *_dclk_freq)
+{
+	int *dclk_freq = _dclk_freq;
+	u16 dmi_mem_clk_speed;
+
+	if (*dclk_freq == -1)
+		return;
+
+	if (dh->type == DMI_ENTRY_MEM_DEVICE) {
+		struct memdev_dmi_entry *memdev_dmi_entry =
+			(struct memdev_dmi_entry *)dh;
+		unsigned long conf_mem_clk_speed_offset =
+			(unsigned long)&memdev_dmi_entry->conf_mem_clk_speed -
+			(unsigned long)&memdev_dmi_entry->type;
+		unsigned long speed_offset =
+			(unsigned long)&memdev_dmi_entry->speed -
+			(unsigned long)&memdev_dmi_entry->type;
+
+		/* Check that a DIMM is present */
+		if (memdev_dmi_entry->size == 0)
+			return;
+
+		/*
+		 * Pick the configured speed if it's available, otherwise
+		 * pick the DIMM speed, or we don't have a speed.
+		 */
+		if (memdev_dmi_entry->length > conf_mem_clk_speed_offset) {
+			dmi_mem_clk_speed =
+				memdev_dmi_entry->conf_mem_clk_speed;
+		} else if (memdev_dmi_entry->length > speed_offset) {
+			dmi_mem_clk_speed = memdev_dmi_entry->speed;
+		} else {
+			*dclk_freq = -1;
+			return;
+		}
+
+		if (*dclk_freq == 0) {
+			/* First pass, speed was 0 */
+			if (dmi_mem_clk_speed > 0) {
+				/* Set speed if a valid speed is read */
+				*dclk_freq = dmi_mem_clk_speed;
+			} else {
+				/* Otherwise we don't have a valid speed */
+				*dclk_freq = -1;
+			}
+		} else if (*dclk_freq > 0 &&
+			   *dclk_freq != dmi_mem_clk_speed) {
+			/*
+			 * If we have a speed, check that all DIMMS are the same
+			 * speed, otherwise set the speed as invalid.
+			 */
+			*dclk_freq = -1;
+		}
+	}
+}
+
+/*
+ * The default DCLK frequency is used as a fallback if we
+ * fail to find anything reliable in the DMI. The value
+ * is taken straight from the datasheet.
+ */
+#define DEFAULT_DCLK_FREQ 800
+
+static int get_dclk_freq(void)
+{
+	int dclk_freq = 0;
+
+	dmi_walk(decode_dclk, (void *)&dclk_freq);
+
+	if (dclk_freq < 1)
+		return DEFAULT_DCLK_FREQ;
+
+	return dclk_freq;
+}
+
+/*
+ * set_sdram_scrub_rate		This routine sets byte/sec bandwidth scrub rate
+ *				to hardware according to SCRUBINTERVAL formula
+ *				found in datasheet.
+ */
+static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 new_bw)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	struct pci_dev *pdev;
+	u32 dw_scrub;
+	u32 dw_ssr;
+
+	/* Get data from the MC register, function 2 */
+	pdev = pvt->pci_mcr[2];
+	if (!pdev)
+		return -ENODEV;
+
+	pci_read_config_dword(pdev, MC_SCRUB_CONTROL, &dw_scrub);
+
+	if (new_bw == 0) {
+		/* Prepare to disable petrol scrub */
+		dw_scrub &= ~STARTSCRUB;
+		/* Stop the patrol scrub engine */
+		write_and_test(pdev, MC_SCRUB_CONTROL,
+			       dw_scrub & ~SCRUBINTERVAL_MASK);
+
+		/* Get current status of scrub rate and set bit to disable */
+		pci_read_config_dword(pdev, MC_SSRCONTROL, &dw_ssr);
+		dw_ssr &= ~SSR_MODE_MASK;
+		dw_ssr |= SSR_MODE_DISABLE;
+	} else {
+		const int cache_line_size = 64;
+		const u32 freq_dclk_mhz = pvt->dclk_freq;
+		unsigned long long scrub_interval;
+		/*
+		 * Translate the desired scrub rate to a register value and
+		 * program the corresponding register value.
+		 */
+		scrub_interval = (unsigned long long)freq_dclk_mhz *
+			cache_line_size * 1000000;
+		do_div(scrub_interval, new_bw);
+
+		if (!scrub_interval || scrub_interval > SCRUBINTERVAL_MASK)
+			return -EINVAL;
+
+		dw_scrub = SCRUBINTERVAL_MASK & scrub_interval;
+
+		/* Start the patrol scrub engine */
+		pci_write_config_dword(pdev, MC_SCRUB_CONTROL,
+				       STARTSCRUB | dw_scrub);
+
+		/* Get current status of scrub rate and set bit to enable */
+		pci_read_config_dword(pdev, MC_SSRCONTROL, &dw_ssr);
+		dw_ssr &= ~SSR_MODE_MASK;
+		dw_ssr |= SSR_MODE_ENABLE;
+	}
+	/* Disable or enable scrubbing */
+	pci_write_config_dword(pdev, MC_SSRCONTROL, dw_ssr);
+
+	return new_bw;
+}
+
+/*
+ * get_sdram_scrub_rate		This routine convert current scrub rate value
+ *				into byte/sec bandwidth according to
+ *				SCRUBINTERVAL formula found in datasheet.
+ */
+static int get_sdram_scrub_rate(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	struct pci_dev *pdev;
+	const u32 cache_line_size = 64;
+	const u32 freq_dclk_mhz = pvt->dclk_freq;
+	unsigned long long scrub_rate;
+	u32 scrubval;
+
+	/* Get data from the MC register, function 2 */
+	pdev = pvt->pci_mcr[2];
+	if (!pdev)
+		return -ENODEV;
+
+	/* Get current scrub control data */
+	pci_read_config_dword(pdev, MC_SCRUB_CONTROL, &scrubval);
+
+	/* Mask highest 8-bits to 0 */
+	scrubval &=  SCRUBINTERVAL_MASK;
+	if (!scrubval)
+		return 0;
+
+	/* Calculate scrub rate value into byte/sec bandwidth */
+	scrub_rate =  (unsigned long long)freq_dclk_mhz *
+		1000000 * cache_line_size;
+	do_div(scrub_rate, scrubval);
+	return (int)scrub_rate;
+}
+
+static void enable_sdram_scrub_setting(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 pci_lock;
+
+	/* Unlock writes to pci registers */
+	pci_read_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, &pci_lock);
+	pci_lock &= ~0x3;
+	pci_write_config_dword(pvt->pci_noncore, MC_CFG_CONTROL,
+			       pci_lock | MC_CFG_UNLOCK);
+
+	mci->set_sdram_scrub_rate = set_sdram_scrub_rate;
+	mci->get_sdram_scrub_rate = get_sdram_scrub_rate;
+}
+
+static void disable_sdram_scrub_setting(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 pci_lock;
+
+	/* Lock writes to pci registers */
+	pci_read_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, &pci_lock);
+	pci_lock &= ~0x3;
+	pci_write_config_dword(pvt->pci_noncore, MC_CFG_CONTROL,
+			       pci_lock | MC_CFG_LOCK);
+}
+
+static void i7core_pci_ctl_create(struct i7core_pvt *pvt)
+{
+	pvt->i7core_pci = edac_pci_create_generic_ctl(
+						&pvt->i7core_dev->pdev[0]->dev,
+						EDAC_MOD_STR);
+	if (unlikely(!pvt->i7core_pci))
+		i7core_printk(KERN_WARNING,
+			      "Unable to setup PCI error report via EDAC\n");
+}
+
+static void i7core_pci_ctl_release(struct i7core_pvt *pvt)
+{
+	if (likely(pvt->i7core_pci))
+		edac_pci_release_generic_ctl(pvt->i7core_pci);
+	else
+		i7core_printk(KERN_ERR,
+				"Couldn't find mem_ctl_info for socket %d\n",
+				pvt->i7core_dev->socket);
+	pvt->i7core_pci = NULL;
+}
+
+static void i7core_unregister_mci(struct i7core_dev *i7core_dev)
+{
+	struct mem_ctl_info *mci = i7core_dev->mci;
+	struct i7core_pvt *pvt;
+
+	if (unlikely(!mci || !mci->pvt_info)) {
+		edac_dbg(0, "MC: dev = %p\n", &i7core_dev->pdev[0]->dev);
+
+		i7core_printk(KERN_ERR, "Couldn't find mci handler\n");
+		return;
+	}
+
+	pvt = mci->pvt_info;
+
+	edac_dbg(0, "MC: mci = %p, dev = %p\n", mci, &i7core_dev->pdev[0]->dev);
+
+	/* Disable scrubrate setting */
+	if (pvt->enable_scrub)
+		disable_sdram_scrub_setting(mci);
+
+	/* Disable EDAC polling */
+	i7core_pci_ctl_release(pvt);
+
+	/* Remove MC sysfs nodes */
+	i7core_delete_sysfs_devices(mci);
+	edac_mc_del_mc(mci->pdev);
+
+	edac_dbg(1, "%s: free mci struct\n", mci->ctl_name);
+	kfree(mci->ctl_name);
+	edac_mc_free(mci);
+	i7core_dev->mci = NULL;
+}
+
+static int i7core_register_mci(struct i7core_dev *i7core_dev)
+{
+	struct mem_ctl_info *mci;
+	struct i7core_pvt *pvt;
+	int rc;
+	struct edac_mc_layer layers[2];
+
+	/* allocate a new MC control structure */
+
+	layers[0].type = EDAC_MC_LAYER_CHANNEL;
+	layers[0].size = NUM_CHANS;
+	layers[0].is_virt_csrow = false;
+	layers[1].type = EDAC_MC_LAYER_SLOT;
+	layers[1].size = MAX_DIMMS;
+	layers[1].is_virt_csrow = true;
+	mci = edac_mc_alloc(i7core_dev->socket, ARRAY_SIZE(layers), layers,
+			    sizeof(*pvt));
+	if (unlikely(!mci))
+		return -ENOMEM;
+
+	edac_dbg(0, "MC: mci = %p, dev = %p\n", mci, &i7core_dev->pdev[0]->dev);
+
+	pvt = mci->pvt_info;
+	memset(pvt, 0, sizeof(*pvt));
+
+	/* Associates i7core_dev and mci for future usage */
+	pvt->i7core_dev = i7core_dev;
+	i7core_dev->mci = mci;
+
+	/*
+	 * FIXME: how to handle RDDR3 at MCI level? It is possible to have
+	 * Mixed RDDR3/UDDR3 with Nehalem, provided that they are on different
+	 * memory channels
+	 */
+	mci->mtype_cap = MEM_FLAG_DDR3;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE;
+	mci->edac_cap = EDAC_FLAG_NONE;
+	mci->mod_name = "i7core_edac.c";
+
+	mci->ctl_name = kasprintf(GFP_KERNEL, "i7 core #%d", i7core_dev->socket);
+	if (!mci->ctl_name) {
+		rc = -ENOMEM;
+		goto fail1;
+	}
+
+	mci->dev_name = pci_name(i7core_dev->pdev[0]);
+	mci->ctl_page_to_phys = NULL;
+
+	/* Store pci devices at mci for faster access */
+	rc = mci_bind_devs(mci, i7core_dev);
+	if (unlikely(rc < 0))
+		goto fail0;
+
+
+	/* Get dimm basic config */
+	get_dimm_config(mci);
+	/* record ptr to the generic device */
+	mci->pdev = &i7core_dev->pdev[0]->dev;
+
+	/* Enable scrubrate setting */
+	if (pvt->enable_scrub)
+		enable_sdram_scrub_setting(mci);
+
+	/* add this new MC control structure to EDAC's list of MCs */
+	if (unlikely(edac_mc_add_mc_with_groups(mci, i7core_dev_groups))) {
+		edac_dbg(0, "MC: failed edac_mc_add_mc()\n");
+		/* FIXME: perhaps some code should go here that disables error
+		 * reporting if we just enabled it
+		 */
+
+		rc = -EINVAL;
+		goto fail0;
+	}
+	if (i7core_create_sysfs_devices(mci)) {
+		edac_dbg(0, "MC: failed to create sysfs nodes\n");
+		edac_mc_del_mc(mci->pdev);
+		rc = -EINVAL;
+		goto fail0;
+	}
+
+	/* Default error mask is any memory */
+	pvt->inject.channel = 0;
+	pvt->inject.dimm = -1;
+	pvt->inject.rank = -1;
+	pvt->inject.bank = -1;
+	pvt->inject.page = -1;
+	pvt->inject.col = -1;
+
+	/* allocating generic PCI control info */
+	i7core_pci_ctl_create(pvt);
+
+	/* DCLK for scrub rate setting */
+	pvt->dclk_freq = get_dclk_freq();
+
+	return 0;
+
+fail0:
+	kfree(mci->ctl_name);
+
+fail1:
+	edac_mc_free(mci);
+	i7core_dev->mci = NULL;
+	return rc;
+}
+
+/*
+ *	i7core_probe	Probe for ONE instance of device to see if it is
+ *			present.
+ *	return:
+ *		0 for FOUND a device
+ *		< 0 for error code
+ */
+
+static int i7core_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	int rc, count = 0;
+	struct i7core_dev *i7core_dev;
+
+	/* get the pci devices we want to reserve for our use */
+	mutex_lock(&i7core_edac_lock);
+
+	/*
+	 * All memory controllers are allocated at the first pass.
+	 */
+	if (unlikely(probed >= 1)) {
+		mutex_unlock(&i7core_edac_lock);
+		return -ENODEV;
+	}
+	probed++;
+
+	rc = i7core_get_all_devices();
+	if (unlikely(rc < 0))
+		goto fail0;
+
+	list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
+		count++;
+		rc = i7core_register_mci(i7core_dev);
+		if (unlikely(rc < 0))
+			goto fail1;
+	}
+
+	/*
+	 * Nehalem-EX uses a different memory controller. However, as the
+	 * memory controller is not visible on some Nehalem/Nehalem-EP, we
+	 * need to indirectly probe via a X58 PCI device. The same devices
+	 * are found on (some) Nehalem-EX. So, on those machines, the
+	 * probe routine needs to return -ENODEV, as the actual Memory
+	 * Controller registers won't be detected.
+	 */
+	if (!count) {
+		rc = -ENODEV;
+		goto fail1;
+	}
+
+	i7core_printk(KERN_INFO,
+		      "Driver loaded, %d memory controller(s) found.\n",
+		      count);
+
+	mutex_unlock(&i7core_edac_lock);
+	return 0;
+
+fail1:
+	list_for_each_entry(i7core_dev, &i7core_edac_list, list)
+		i7core_unregister_mci(i7core_dev);
+
+	i7core_put_all_devices();
+fail0:
+	mutex_unlock(&i7core_edac_lock);
+	return rc;
+}
+
+/*
+ *	i7core_remove	destructor for one instance of device
+ *
+ */
+static void i7core_remove(struct pci_dev *pdev)
+{
+	struct i7core_dev *i7core_dev;
+
+	edac_dbg(0, "\n");
+
+	/*
+	 * we have a trouble here: pdev value for removal will be wrong, since
+	 * it will point to the X58 register used to detect that the machine
+	 * is a Nehalem or upper design. However, due to the way several PCI
+	 * devices are grouped together to provide MC functionality, we need
+	 * to use a different method for releasing the devices
+	 */
+
+	mutex_lock(&i7core_edac_lock);
+
+	if (unlikely(!probed)) {
+		mutex_unlock(&i7core_edac_lock);
+		return;
+	}
+
+	list_for_each_entry(i7core_dev, &i7core_edac_list, list)
+		i7core_unregister_mci(i7core_dev);
+
+	/* Release PCI resources */
+	i7core_put_all_devices();
+
+	probed--;
+
+	mutex_unlock(&i7core_edac_lock);
+}
+
+MODULE_DEVICE_TABLE(pci, i7core_pci_tbl);
+
+/*
+ *	i7core_driver	pci_driver structure for this module
+ *
+ */
+static struct pci_driver i7core_driver = {
+	.name     = "i7core_edac",
+	.probe    = i7core_probe,
+	.remove   = i7core_remove,
+	.id_table = i7core_pci_tbl,
+};
+
+/*
+ *	i7core_init		Module entry function
+ *			Try to initialize this module for its devices
+ */
+static int __init i7core_init(void)
+{
+	int pci_rc;
+
+	edac_dbg(2, "\n");
+
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
+
+	if (use_pci_fixup)
+		i7core_xeon_pci_fixup(pci_dev_table);
+
+	pci_rc = pci_register_driver(&i7core_driver);
+
+	if (pci_rc >= 0) {
+		mce_register_decode_chain(&i7_mce_dec);
+		return 0;
+	}
+
+	i7core_printk(KERN_ERR, "Failed to register device with error %d.\n",
+		      pci_rc);
+
+	return pci_rc;
+}
+
+/*
+ *	i7core_exit()	Module exit function
+ *			Unregister the driver
+ */
+static void __exit i7core_exit(void)
+{
+	edac_dbg(2, "\n");
+	pci_unregister_driver(&i7core_driver);
+	mce_unregister_decode_chain(&i7_mce_dec);
+}
+
+module_init(i7core_init);
+module_exit(i7core_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("MC Driver for Intel i7 Core memory controllers - "
+		   I7CORE_REVISION);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c
new file mode 100644
index 000000000..a2ca929e2
--- /dev/null
+++ b/drivers/edac/i82443bxgx_edac.c
@@ -0,0 +1,463 @@
+/*
+ * Intel 82443BX/GX (440BX/GX chipset) Memory Controller EDAC kernel
+ * module (C) 2006 Tim Small
+ *
+ * This file may be distributed under the terms of the GNU General
+ * Public License.
+ *
+ * Written by Tim Small <tim@buttersideup.com>, based on work by Linux
+ * Networx, Thayne Harbaugh, Dan Hollis <goemon at anime dot net> and
+ * others.
+ *
+ * 440GX fix by Jason Uhlenkott <juhlenko@akamai.com>.
+ *
+ * Written with reference to 82443BX Host Bridge Datasheet:
+ * http://download.intel.com/design/chipsets/datashts/29063301.pdf
+ * references to this document given in [].
+ *
+ * This module doesn't support the 440LX, but it may be possible to
+ * make it do so (the 440LX's register definitions are different, but
+ * not completely so - I haven't studied them in enough detail to know
+ * how easy this would be).
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+
+#include <linux/edac.h>
+#include "edac_module.h"
+
+#define EDAC_MOD_STR    "i82443bxgx_edac"
+
+/* The 82443BX supports SDRAM, or EDO (EDO for mobile only), "Memory
+ * Size: 8 MB to 512 MB (1GB with Registered DIMMs) with eight memory
+ * rows" "The 82443BX supports multiple-bit error detection and
+ * single-bit error correction when ECC mode is enabled and
+ * single/multi-bit error detection when correction is disabled.
+ * During writes to the DRAM, the 82443BX generates ECC for the data
+ * on a QWord basis. Partial QWord writes require a read-modify-write
+ * cycle when ECC is enabled."
+*/
+
+/* "Additionally, the 82443BX ensures that the data is corrected in
+ * main memory so that accumulation of errors is prevented. Another
+ * error within the same QWord would result in a double-bit error
+ * which is unrecoverable. This is known as hardware scrubbing since
+ * it requires no software intervention to correct the data in memory."
+ */
+
+/* [Also see page 100 (section 4.3), "DRAM Interface"]
+ * [Also see page 112 (section 4.6.1.4), ECC]
+ */
+
+#define I82443BXGX_NR_CSROWS 8
+#define I82443BXGX_NR_CHANS  1
+#define I82443BXGX_NR_DIMMS  4
+
+/* 82443 PCI Device 0 */
+#define I82443BXGX_NBXCFG 0x50	/* 32bit register starting at this PCI
+				 * config space offset */
+#define I82443BXGX_NBXCFG_OFFSET_NON_ECCROW 24	/* Array of bits, zero if
+						 * row is non-ECC */
+#define I82443BXGX_NBXCFG_OFFSET_DRAM_FREQ 12	/* 2 bits,00=100MHz,10=66 MHz */
+
+#define I82443BXGX_NBXCFG_OFFSET_DRAM_INTEGRITY 7	/* 2 bits:       */
+#define I82443BXGX_NBXCFG_INTEGRITY_NONE   0x0	/* 00 = Non-ECC */
+#define I82443BXGX_NBXCFG_INTEGRITY_EC     0x1	/* 01 = EC (only) */
+#define I82443BXGX_NBXCFG_INTEGRITY_ECC    0x2	/* 10 = ECC */
+#define I82443BXGX_NBXCFG_INTEGRITY_SCRUB  0x3	/* 11 = ECC + HW Scrub */
+
+#define I82443BXGX_NBXCFG_OFFSET_ECC_DIAG_ENABLE  6
+
+/* 82443 PCI Device 0 */
+#define I82443BXGX_EAP   0x80	/* 32bit register starting at this PCI
+				 * config space offset, Error Address
+				 * Pointer Register */
+#define I82443BXGX_EAP_OFFSET_EAP  12	/* High 20 bits of error address */
+#define I82443BXGX_EAP_OFFSET_MBE  BIT(1)	/* Err at EAP was multi-bit (W1TC) */
+#define I82443BXGX_EAP_OFFSET_SBE  BIT(0)	/* Err at EAP was single-bit (W1TC) */
+
+#define I82443BXGX_ERRCMD  0x90	/* 8bit register starting at this PCI
+				 * config space offset. */
+#define I82443BXGX_ERRCMD_OFFSET_SERR_ON_MBE BIT(1)	/* 1 = enable */
+#define I82443BXGX_ERRCMD_OFFSET_SERR_ON_SBE BIT(0)	/* 1 = enable */
+
+#define I82443BXGX_ERRSTS  0x91	/* 16bit register starting at this PCI
+				 * config space offset. */
+#define I82443BXGX_ERRSTS_OFFSET_MBFRE 5	/* 3 bits - first err row multibit */
+#define I82443BXGX_ERRSTS_OFFSET_MEF   BIT(4)	/* 1 = MBE occurred */
+#define I82443BXGX_ERRSTS_OFFSET_SBFRE 1	/* 3 bits - first err row singlebit */
+#define I82443BXGX_ERRSTS_OFFSET_SEF   BIT(0)	/* 1 = SBE occurred */
+
+#define I82443BXGX_DRAMC 0x57	/* 8bit register starting at this PCI
+				 * config space offset. */
+#define I82443BXGX_DRAMC_OFFSET_DT 3	/* 2 bits, DRAM Type */
+#define I82443BXGX_DRAMC_DRAM_IS_EDO 0	/* 00 = EDO */
+#define I82443BXGX_DRAMC_DRAM_IS_SDRAM 1	/* 01 = SDRAM */
+#define I82443BXGX_DRAMC_DRAM_IS_RSDRAM 2	/* 10 = Registered SDRAM */
+
+#define I82443BXGX_DRB 0x60	/* 8x 8bit registers starting at this PCI
+				 * config space offset. */
+
+/* FIXME - don't poll when ECC disabled? */
+
+struct i82443bxgx_edacmc_error_info {
+	u32 eap;
+};
+
+static struct edac_pci_ctl_info *i82443bxgx_pci;
+
+static struct pci_dev *mci_pdev;	/* init dev: in case that AGP code has
+					 * already registered driver
+					 */
+
+static int i82443bxgx_registered = 1;
+
+static void i82443bxgx_edacmc_get_error_info(struct mem_ctl_info *mci,
+				struct i82443bxgx_edacmc_error_info
+				*info)
+{
+	struct pci_dev *pdev;
+	pdev = to_pci_dev(mci->pdev);
+	pci_read_config_dword(pdev, I82443BXGX_EAP, &info->eap);
+	if (info->eap & I82443BXGX_EAP_OFFSET_SBE)
+		/* Clear error to allow next error to be reported [p.61] */
+		pci_write_bits32(pdev, I82443BXGX_EAP,
+				 I82443BXGX_EAP_OFFSET_SBE,
+				 I82443BXGX_EAP_OFFSET_SBE);
+
+	if (info->eap & I82443BXGX_EAP_OFFSET_MBE)
+		/* Clear error to allow next error to be reported [p.61] */
+		pci_write_bits32(pdev, I82443BXGX_EAP,
+				 I82443BXGX_EAP_OFFSET_MBE,
+				 I82443BXGX_EAP_OFFSET_MBE);
+}
+
+static int i82443bxgx_edacmc_process_error_info(struct mem_ctl_info *mci,
+						struct
+						i82443bxgx_edacmc_error_info
+						*info, int handle_errors)
+{
+	int error_found = 0;
+	u32 eapaddr, page, pageoffset;
+
+	/* bits 30:12 hold the 4kb block in which the error occurred
+	 * [p.61] */
+	eapaddr = (info->eap & 0xfffff000);
+	page = eapaddr >> PAGE_SHIFT;
+	pageoffset = eapaddr - (page << PAGE_SHIFT);
+
+	if (info->eap & I82443BXGX_EAP_OFFSET_SBE) {
+		error_found = 1;
+		if (handle_errors)
+			edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+					     page, pageoffset, 0,
+					     edac_mc_find_csrow_by_page(mci, page),
+					     0, -1, mci->ctl_name, "");
+	}
+
+	if (info->eap & I82443BXGX_EAP_OFFSET_MBE) {
+		error_found = 1;
+		if (handle_errors)
+			edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+					     page, pageoffset, 0,
+					     edac_mc_find_csrow_by_page(mci, page),
+					     0, -1, mci->ctl_name, "");
+	}
+
+	return error_found;
+}
+
+static void i82443bxgx_edacmc_check(struct mem_ctl_info *mci)
+{
+	struct i82443bxgx_edacmc_error_info info;
+
+	edac_dbg(1, "MC%d\n", mci->mc_idx);
+	i82443bxgx_edacmc_get_error_info(mci, &info);
+	i82443bxgx_edacmc_process_error_info(mci, &info, 1);
+}
+
+static void i82443bxgx_init_csrows(struct mem_ctl_info *mci,
+				struct pci_dev *pdev,
+				enum edac_type edac_mode,
+				enum mem_type mtype)
+{
+	struct csrow_info *csrow;
+	struct dimm_info *dimm;
+	int index;
+	u8 drbar, dramc;
+	u32 row_base, row_high_limit, row_high_limit_last;
+
+	pci_read_config_byte(pdev, I82443BXGX_DRAMC, &dramc);
+	row_high_limit_last = 0;
+	for (index = 0; index < mci->nr_csrows; index++) {
+		csrow = mci->csrows[index];
+		dimm = csrow->channels[0]->dimm;
+
+		pci_read_config_byte(pdev, I82443BXGX_DRB + index, &drbar);
+		edac_dbg(1, "MC%d: Row=%d DRB = %#0x\n",
+			 mci->mc_idx, index, drbar);
+		row_high_limit = ((u32) drbar << 23);
+		/* find the DRAM Chip Select Base address and mask */
+		edac_dbg(1, "MC%d: Row=%d, Boundary Address=%#0x, Last = %#0x\n",
+			 mci->mc_idx, index, row_high_limit,
+			 row_high_limit_last);
+
+		/* 440GX goes to 2GB, represented with a DRB of 0. */
+		if (row_high_limit_last && !row_high_limit)
+			row_high_limit = 1UL << 31;
+
+		/* This row is empty [p.49] */
+		if (row_high_limit == row_high_limit_last)
+			continue;
+		row_base = row_high_limit_last;
+		csrow->first_page = row_base >> PAGE_SHIFT;
+		csrow->last_page = (row_high_limit >> PAGE_SHIFT) - 1;
+		dimm->nr_pages = csrow->last_page - csrow->first_page + 1;
+		/* EAP reports in 4kilobyte granularity [61] */
+		dimm->grain = 1 << 12;
+		dimm->mtype = mtype;
+		/* I don't think 440BX can tell you device type? FIXME? */
+		dimm->dtype = DEV_UNKNOWN;
+		/* Mode is global to all rows on 440BX */
+		dimm->edac_mode = edac_mode;
+		row_high_limit_last = row_high_limit;
+	}
+}
+
+static int i82443bxgx_edacmc_probe1(struct pci_dev *pdev, int dev_idx)
+{
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[2];
+	u8 dramc;
+	u32 nbxcfg, ecc_mode;
+	enum mem_type mtype;
+	enum edac_type edac_mode;
+
+	edac_dbg(0, "MC:\n");
+
+	/* Something is really hosed if PCI config space reads from
+	 * the MC aren't working.
+	 */
+	if (pci_read_config_dword(pdev, I82443BXGX_NBXCFG, &nbxcfg))
+		return -EIO;
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = I82443BXGX_NR_CSROWS;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = I82443BXGX_NR_CHANS;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0);
+	if (mci == NULL)
+		return -ENOMEM;
+
+	edac_dbg(0, "MC: mci = %p\n", mci);
+	mci->pdev = &pdev->dev;
+	mci->mtype_cap = MEM_FLAG_EDO | MEM_FLAG_SDR | MEM_FLAG_RDR;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
+	pci_read_config_byte(pdev, I82443BXGX_DRAMC, &dramc);
+	switch ((dramc >> I82443BXGX_DRAMC_OFFSET_DT) & (BIT(0) | BIT(1))) {
+	case I82443BXGX_DRAMC_DRAM_IS_EDO:
+		mtype = MEM_EDO;
+		break;
+	case I82443BXGX_DRAMC_DRAM_IS_SDRAM:
+		mtype = MEM_SDR;
+		break;
+	case I82443BXGX_DRAMC_DRAM_IS_RSDRAM:
+		mtype = MEM_RDR;
+		break;
+	default:
+		edac_dbg(0, "Unknown/reserved DRAM type value in DRAMC register!\n");
+		mtype = -MEM_UNKNOWN;
+	}
+
+	if ((mtype == MEM_SDR) || (mtype == MEM_RDR))
+		mci->edac_cap = mci->edac_ctl_cap;
+	else
+		mci->edac_cap = EDAC_FLAG_NONE;
+
+	mci->scrub_cap = SCRUB_FLAG_HW_SRC;
+	pci_read_config_dword(pdev, I82443BXGX_NBXCFG, &nbxcfg);
+	ecc_mode = ((nbxcfg >> I82443BXGX_NBXCFG_OFFSET_DRAM_INTEGRITY) &
+		(BIT(0) | BIT(1)));
+
+	mci->scrub_mode = (ecc_mode == I82443BXGX_NBXCFG_INTEGRITY_SCRUB)
+		? SCRUB_HW_SRC : SCRUB_NONE;
+
+	switch (ecc_mode) {
+	case I82443BXGX_NBXCFG_INTEGRITY_NONE:
+		edac_mode = EDAC_NONE;
+		break;
+	case I82443BXGX_NBXCFG_INTEGRITY_EC:
+		edac_mode = EDAC_EC;
+		break;
+	case I82443BXGX_NBXCFG_INTEGRITY_ECC:
+	case I82443BXGX_NBXCFG_INTEGRITY_SCRUB:
+		edac_mode = EDAC_SECDED;
+		break;
+	default:
+		edac_dbg(0, "Unknown/reserved ECC state in NBXCFG register!\n");
+		edac_mode = EDAC_UNKNOWN;
+		break;
+	}
+
+	i82443bxgx_init_csrows(mci, pdev, edac_mode, mtype);
+
+	/* Many BIOSes don't clear error flags on boot, so do this
+	 * here, or we get "phantom" errors occurring at module-load
+	 * time. */
+	pci_write_bits32(pdev, I82443BXGX_EAP,
+			(I82443BXGX_EAP_OFFSET_SBE |
+				I82443BXGX_EAP_OFFSET_MBE),
+			(I82443BXGX_EAP_OFFSET_SBE |
+				I82443BXGX_EAP_OFFSET_MBE));
+
+	mci->mod_name = EDAC_MOD_STR;
+	mci->ctl_name = "I82443BXGX";
+	mci->dev_name = pci_name(pdev);
+	mci->edac_check = i82443bxgx_edacmc_check;
+	mci->ctl_page_to_phys = NULL;
+
+	if (edac_mc_add_mc(mci)) {
+		edac_dbg(3, "failed edac_mc_add_mc()\n");
+		goto fail;
+	}
+
+	/* allocating generic PCI control info */
+	i82443bxgx_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
+	if (!i82443bxgx_pci) {
+		printk(KERN_WARNING
+			"%s(): Unable to create PCI control\n",
+			__func__);
+		printk(KERN_WARNING
+			"%s(): PCI error report via EDAC not setup\n",
+			__func__);
+	}
+
+	edac_dbg(3, "MC: success\n");
+	return 0;
+
+fail:
+	edac_mc_free(mci);
+	return -ENODEV;
+}
+
+/* returns count (>= 0), or negative on error */
+static int i82443bxgx_edacmc_init_one(struct pci_dev *pdev,
+				      const struct pci_device_id *ent)
+{
+	int rc;
+
+	edac_dbg(0, "MC:\n");
+
+	/* don't need to call pci_enable_device() */
+	rc = i82443bxgx_edacmc_probe1(pdev, ent->driver_data);
+
+	if (mci_pdev == NULL)
+		mci_pdev = pci_dev_get(pdev);
+
+	return rc;
+}
+
+static void i82443bxgx_edacmc_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+
+	edac_dbg(0, "\n");
+
+	if (i82443bxgx_pci)
+		edac_pci_release_generic_ctl(i82443bxgx_pci);
+
+	if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
+		return;
+
+	edac_mc_free(mci);
+}
+
+static const struct pci_device_id i82443bxgx_pci_tbl[] = {
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_0)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_2)},
+	{0,}			/* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, i82443bxgx_pci_tbl);
+
+static struct pci_driver i82443bxgx_edacmc_driver = {
+	.name = EDAC_MOD_STR,
+	.probe = i82443bxgx_edacmc_init_one,
+	.remove = i82443bxgx_edacmc_remove_one,
+	.id_table = i82443bxgx_pci_tbl,
+};
+
+static int __init i82443bxgx_edacmc_init(void)
+{
+	int pci_rc;
+       /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+       opstate_init();
+
+	pci_rc = pci_register_driver(&i82443bxgx_edacmc_driver);
+	if (pci_rc < 0)
+		goto fail0;
+
+	if (mci_pdev == NULL) {
+		const struct pci_device_id *id = &i82443bxgx_pci_tbl[0];
+		int i = 0;
+		i82443bxgx_registered = 0;
+
+		while (mci_pdev == NULL && id->vendor != 0) {
+			mci_pdev = pci_get_device(id->vendor,
+					id->device, NULL);
+			i++;
+			id = &i82443bxgx_pci_tbl[i];
+		}
+		if (!mci_pdev) {
+			edac_dbg(0, "i82443bxgx pci_get_device fail\n");
+			pci_rc = -ENODEV;
+			goto fail1;
+		}
+
+		pci_rc = i82443bxgx_edacmc_init_one(mci_pdev, i82443bxgx_pci_tbl);
+
+		if (pci_rc < 0) {
+			edac_dbg(0, "i82443bxgx init fail\n");
+			pci_rc = -ENODEV;
+			goto fail1;
+		}
+	}
+
+	return 0;
+
+fail1:
+	pci_unregister_driver(&i82443bxgx_edacmc_driver);
+
+fail0:
+	pci_dev_put(mci_pdev);
+	return pci_rc;
+}
+
+static void __exit i82443bxgx_edacmc_exit(void)
+{
+	pci_unregister_driver(&i82443bxgx_edacmc_driver);
+
+	if (!i82443bxgx_registered)
+		i82443bxgx_edacmc_remove_one(mci_pdev);
+
+	pci_dev_put(mci_pdev);
+}
+
+module_init(i82443bxgx_edacmc_init);
+module_exit(i82443bxgx_edacmc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Tim Small <tim@buttersideup.com> - WPAD");
+MODULE_DESCRIPTION("EDAC MC support for Intel 82443BX/GX memory controllers");
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/edac/i82860_edac.c b/drivers/edac/i82860_edac.c
new file mode 100644
index 000000000..3e3a80ffb
--- /dev/null
+++ b/drivers/edac/i82860_edac.c
@@ -0,0 +1,364 @@
+/*
+ * Intel 82860 Memory Controller kernel module
+ * (C) 2005 Red Hat (http://www.redhat.com)
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Written by Ben Woodard <woodard@redhat.com>
+ * shamelessly copied from and based upon the edac_i82875 driver
+ * by Thayne Harbaugh of Linux Networx. (http://lnxi.com)
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/edac.h>
+#include "edac_module.h"
+
+#define EDAC_MOD_STR	"i82860_edac"
+
+#define i82860_printk(level, fmt, arg...) \
+	edac_printk(level, "i82860", fmt, ##arg)
+
+#define i82860_mc_printk(mci, level, fmt, arg...) \
+	edac_mc_chipset_printk(mci, level, "i82860", fmt, ##arg)
+
+#ifndef PCI_DEVICE_ID_INTEL_82860_0
+#define PCI_DEVICE_ID_INTEL_82860_0	0x2531
+#endif				/* PCI_DEVICE_ID_INTEL_82860_0 */
+
+#define I82860_MCHCFG 0x50
+#define I82860_GBA 0x60
+#define I82860_GBA_MASK 0x7FF
+#define I82860_GBA_SHIFT 24
+#define I82860_ERRSTS 0xC8
+#define I82860_EAP 0xE4
+#define I82860_DERRCTL_STS 0xE2
+
+enum i82860_chips {
+	I82860 = 0,
+};
+
+struct i82860_dev_info {
+	const char *ctl_name;
+};
+
+struct i82860_error_info {
+	u16 errsts;
+	u32 eap;
+	u16 derrsyn;
+	u16 errsts2;
+};
+
+static const struct i82860_dev_info i82860_devs[] = {
+	[I82860] = {
+		.ctl_name = "i82860"},
+};
+
+static struct pci_dev *mci_pdev;	/* init dev: in case that AGP code
+					 * has already registered driver
+					 */
+static struct edac_pci_ctl_info *i82860_pci;
+
+static void i82860_get_error_info(struct mem_ctl_info *mci,
+				struct i82860_error_info *info)
+{
+	struct pci_dev *pdev;
+
+	pdev = to_pci_dev(mci->pdev);
+
+	/*
+	 * This is a mess because there is no atomic way to read all the
+	 * registers at once and the registers can transition from CE being
+	 * overwritten by UE.
+	 */
+	pci_read_config_word(pdev, I82860_ERRSTS, &info->errsts);
+	pci_read_config_dword(pdev, I82860_EAP, &info->eap);
+	pci_read_config_word(pdev, I82860_DERRCTL_STS, &info->derrsyn);
+	pci_read_config_word(pdev, I82860_ERRSTS, &info->errsts2);
+
+	pci_write_bits16(pdev, I82860_ERRSTS, 0x0003, 0x0003);
+
+	/*
+	 * If the error is the same for both reads then the first set of reads
+	 * is valid.  If there is a change then there is a CE no info and the
+	 * second set of reads is valid and should be UE info.
+	 */
+	if (!(info->errsts2 & 0x0003))
+		return;
+
+	if ((info->errsts ^ info->errsts2) & 0x0003) {
+		pci_read_config_dword(pdev, I82860_EAP, &info->eap);
+		pci_read_config_word(pdev, I82860_DERRCTL_STS, &info->derrsyn);
+	}
+}
+
+static int i82860_process_error_info(struct mem_ctl_info *mci,
+				struct i82860_error_info *info,
+				int handle_errors)
+{
+	struct dimm_info *dimm;
+	int row;
+
+	if (!(info->errsts2 & 0x0003))
+		return 0;
+
+	if (!handle_errors)
+		return 1;
+
+	if ((info->errsts ^ info->errsts2) & 0x0003) {
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
+				     -1, -1, -1, "UE overwrote CE", "");
+		info->errsts = info->errsts2;
+	}
+
+	info->eap >>= PAGE_SHIFT;
+	row = edac_mc_find_csrow_by_page(mci, info->eap);
+	dimm = mci->csrows[row]->channels[0]->dimm;
+
+	if (info->errsts & 0x0002)
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+				     info->eap, 0, 0,
+				     dimm->location[0], dimm->location[1], -1,
+				     "i82860 UE", "");
+	else
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+				     info->eap, 0, info->derrsyn,
+				     dimm->location[0], dimm->location[1], -1,
+				     "i82860 CE", "");
+
+	return 1;
+}
+
+static void i82860_check(struct mem_ctl_info *mci)
+{
+	struct i82860_error_info info;
+
+	edac_dbg(1, "MC%d\n", mci->mc_idx);
+	i82860_get_error_info(mci, &info);
+	i82860_process_error_info(mci, &info, 1);
+}
+
+static void i82860_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev)
+{
+	unsigned long last_cumul_size;
+	u16 mchcfg_ddim;	/* DRAM Data Integrity Mode 0=none, 2=edac */
+	u16 value;
+	u32 cumul_size;
+	struct csrow_info *csrow;
+	struct dimm_info *dimm;
+	int index;
+
+	pci_read_config_word(pdev, I82860_MCHCFG, &mchcfg_ddim);
+	mchcfg_ddim = mchcfg_ddim & 0x180;
+	last_cumul_size = 0;
+
+	/* The group row boundary (GRA) reg values are boundary address
+	 * for each DRAM row with a granularity of 16MB.  GRA regs are
+	 * cumulative; therefore GRA15 will contain the total memory contained
+	 * in all eight rows.
+	 */
+	for (index = 0; index < mci->nr_csrows; index++) {
+		csrow = mci->csrows[index];
+		dimm = csrow->channels[0]->dimm;
+
+		pci_read_config_word(pdev, I82860_GBA + index * 2, &value);
+		cumul_size = (value & I82860_GBA_MASK) <<
+			(I82860_GBA_SHIFT - PAGE_SHIFT);
+		edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size);
+
+		if (cumul_size == last_cumul_size)
+			continue;	/* not populated */
+
+		csrow->first_page = last_cumul_size;
+		csrow->last_page = cumul_size - 1;
+		dimm->nr_pages = cumul_size - last_cumul_size;
+		last_cumul_size = cumul_size;
+		dimm->grain = 1 << 12;	/* I82860_EAP has 4KiB reolution */
+		dimm->mtype = MEM_RMBS;
+		dimm->dtype = DEV_UNKNOWN;
+		dimm->edac_mode = mchcfg_ddim ? EDAC_SECDED : EDAC_NONE;
+	}
+}
+
+static int i82860_probe1(struct pci_dev *pdev, int dev_idx)
+{
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[2];
+	struct i82860_error_info discard;
+
+	/*
+	 * RDRAM has channels but these don't map onto the csrow abstraction.
+	 * According with the datasheet, there are 2 Rambus channels, supporting
+	 * up to 16 direct RDRAM devices.
+	 * The device groups from the GRA registers seem to map reasonably
+	 * well onto the notion of a chip select row.
+	 * There are 16 GRA registers and since the name is associated with
+	 * the channel and the GRA registers map to physical devices so we are
+	 * going to make 1 channel for group.
+	 */
+	layers[0].type = EDAC_MC_LAYER_CHANNEL;
+	layers[0].size = 2;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_SLOT;
+	layers[1].size = 8;
+	layers[1].is_virt_csrow = true;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0);
+	if (!mci)
+		return -ENOMEM;
+
+	edac_dbg(3, "init mci\n");
+	mci->pdev = &pdev->dev;
+	mci->mtype_cap = MEM_FLAG_DDR;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+	/* I"m not sure about this but I think that all RDRAM is SECDED */
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->mod_name = EDAC_MOD_STR;
+	mci->ctl_name = i82860_devs[dev_idx].ctl_name;
+	mci->dev_name = pci_name(pdev);
+	mci->edac_check = i82860_check;
+	mci->ctl_page_to_phys = NULL;
+	i82860_init_csrows(mci, pdev);
+	i82860_get_error_info(mci, &discard);	/* clear counters */
+
+	/* Here we assume that we will never see multiple instances of this
+	 * type of memory controller.  The ID is therefore hardcoded to 0.
+	 */
+	if (edac_mc_add_mc(mci)) {
+		edac_dbg(3, "failed edac_mc_add_mc()\n");
+		goto fail;
+	}
+
+	/* allocating generic PCI control info */
+	i82860_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
+	if (!i82860_pci) {
+		printk(KERN_WARNING
+			"%s(): Unable to create PCI control\n",
+			__func__);
+		printk(KERN_WARNING
+			"%s(): PCI error report via EDAC not setup\n",
+			__func__);
+	}
+
+	/* get this far and it's successful */
+	edac_dbg(3, "success\n");
+
+	return 0;
+
+fail:
+	edac_mc_free(mci);
+	return -ENODEV;
+}
+
+/* returns count (>= 0), or negative on error */
+static int i82860_init_one(struct pci_dev *pdev,
+			   const struct pci_device_id *ent)
+{
+	int rc;
+
+	edac_dbg(0, "\n");
+	i82860_printk(KERN_INFO, "i82860 init one\n");
+
+	if (pci_enable_device(pdev) < 0)
+		return -EIO;
+
+	rc = i82860_probe1(pdev, ent->driver_data);
+
+	if (rc == 0)
+		mci_pdev = pci_dev_get(pdev);
+
+	return rc;
+}
+
+static void i82860_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+
+	edac_dbg(0, "\n");
+
+	if (i82860_pci)
+		edac_pci_release_generic_ctl(i82860_pci);
+
+	if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
+		return;
+
+	edac_mc_free(mci);
+}
+
+static const struct pci_device_id i82860_pci_tbl[] = {
+	{
+	 PCI_VEND_DEV(INTEL, 82860_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	 I82860},
+	{
+	 0,
+	 }			/* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, i82860_pci_tbl);
+
+static struct pci_driver i82860_driver = {
+	.name = EDAC_MOD_STR,
+	.probe = i82860_init_one,
+	.remove = i82860_remove_one,
+	.id_table = i82860_pci_tbl,
+};
+
+static int __init i82860_init(void)
+{
+	int pci_rc;
+
+	edac_dbg(3, "\n");
+
+       /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+       opstate_init();
+
+	if ((pci_rc = pci_register_driver(&i82860_driver)) < 0)
+		goto fail0;
+
+	if (!mci_pdev) {
+		mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+					PCI_DEVICE_ID_INTEL_82860_0, NULL);
+
+		if (mci_pdev == NULL) {
+			edac_dbg(0, "860 pci_get_device fail\n");
+			pci_rc = -ENODEV;
+			goto fail1;
+		}
+
+		pci_rc = i82860_init_one(mci_pdev, i82860_pci_tbl);
+
+		if (pci_rc < 0) {
+			edac_dbg(0, "860 init fail\n");
+			pci_rc = -ENODEV;
+			goto fail1;
+		}
+	}
+
+	return 0;
+
+fail1:
+	pci_unregister_driver(&i82860_driver);
+
+fail0:
+	pci_dev_put(mci_pdev);
+	return pci_rc;
+}
+
+static void __exit i82860_exit(void)
+{
+	edac_dbg(3, "\n");
+	pci_unregister_driver(&i82860_driver);
+	pci_dev_put(mci_pdev);
+}
+
+module_init(i82860_init);
+module_exit(i82860_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com) "
+		"Ben Woodard <woodard@redhat.com>");
+MODULE_DESCRIPTION("ECC support for Intel 82860 memory hub controllers");
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/edac/i82875p_edac.c b/drivers/edac/i82875p_edac.c
new file mode 100644
index 000000000..ceac925af
--- /dev/null
+++ b/drivers/edac/i82875p_edac.c
@@ -0,0 +1,600 @@
+/*
+ * Intel D82875P Memory Controller kernel module
+ * (C) 2003 Linux Networx (http://lnxi.com)
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Written by Thayne Harbaugh
+ * Contributors:
+ *	Wang Zhenyu at intel.com
+ *
+ * $Id: edac_i82875p.c,v 1.5.2.11 2005/10/05 00:43:44 dsp_llnl Exp $
+ *
+ * Note: E7210 appears same as D82875P - zhenyu.z.wang at intel.com
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/edac.h>
+#include "edac_module.h"
+
+#define EDAC_MOD_STR		"i82875p_edac"
+
+#define i82875p_printk(level, fmt, arg...) \
+	edac_printk(level, "i82875p", fmt, ##arg)
+
+#define i82875p_mc_printk(mci, level, fmt, arg...) \
+	edac_mc_chipset_printk(mci, level, "i82875p", fmt, ##arg)
+
+#ifndef PCI_DEVICE_ID_INTEL_82875_0
+#define PCI_DEVICE_ID_INTEL_82875_0	0x2578
+#endif				/* PCI_DEVICE_ID_INTEL_82875_0 */
+
+#ifndef PCI_DEVICE_ID_INTEL_82875_6
+#define PCI_DEVICE_ID_INTEL_82875_6	0x257e
+#endif				/* PCI_DEVICE_ID_INTEL_82875_6 */
+
+/* four csrows in dual channel, eight in single channel */
+#define I82875P_NR_DIMMS		8
+#define I82875P_NR_CSROWS(nr_chans)	(I82875P_NR_DIMMS / (nr_chans))
+
+/* Intel 82875p register addresses - device 0 function 0 - DRAM Controller */
+#define I82875P_EAP		0x58	/* Error Address Pointer (32b)
+					 *
+					 * 31:12 block address
+					 * 11:0  reserved
+					 */
+
+#define I82875P_DERRSYN		0x5c	/* DRAM Error Syndrome (8b)
+					 *
+					 *  7:0  DRAM ECC Syndrome
+					 */
+
+#define I82875P_DES		0x5d	/* DRAM Error Status (8b)
+					 *
+					 *  7:1  reserved
+					 *  0    Error channel 0/1
+					 */
+
+#define I82875P_ERRSTS		0xc8	/* Error Status Register (16b)
+					 *
+					 * 15:10 reserved
+					 *  9    non-DRAM lock error (ndlock)
+					 *  8    Sftwr Generated SMI
+					 *  7    ECC UE
+					 *  6    reserved
+					 *  5    MCH detects unimplemented cycle
+					 *  4    AGP access outside GA
+					 *  3    Invalid AGP access
+					 *  2    Invalid GA translation table
+					 *  1    Unsupported AGP command
+					 *  0    ECC CE
+					 */
+
+#define I82875P_ERRCMD		0xca	/* Error Command (16b)
+					 *
+					 * 15:10 reserved
+					 *  9    SERR on non-DRAM lock
+					 *  8    SERR on ECC UE
+					 *  7    SERR on ECC CE
+					 *  6    target abort on high exception
+					 *  5    detect unimplemented cyc
+					 *  4    AGP access outside of GA
+					 *  3    SERR on invalid AGP access
+					 *  2    invalid translation table
+					 *  1    SERR on unsupported AGP command
+					 *  0    reserved
+					 */
+
+/* Intel 82875p register addresses - device 6 function 0 - DRAM Controller */
+#define I82875P_PCICMD6		0x04	/* PCI Command Register (16b)
+					 *
+					 * 15:10 reserved
+					 *  9    fast back-to-back - ro 0
+					 *  8    SERR enable - ro 0
+					 *  7    addr/data stepping - ro 0
+					 *  6    parity err enable - ro 0
+					 *  5    VGA palette snoop - ro 0
+					 *  4    mem wr & invalidate - ro 0
+					 *  3    special cycle - ro 0
+					 *  2    bus master - ro 0
+					 *  1    mem access dev6 - 0(dis),1(en)
+					 *  0    IO access dev3 - 0(dis),1(en)
+					 */
+
+#define I82875P_BAR6		0x10	/* Mem Delays Base ADDR Reg (32b)
+					 *
+					 * 31:12 mem base addr [31:12]
+					 * 11:4  address mask - ro 0
+					 *  3    prefetchable - ro 0(non),1(pre)
+					 *  2:1  mem type - ro 0
+					 *  0    mem space - ro 0
+					 */
+
+/* Intel 82875p MMIO register space - device 0 function 0 - MMR space */
+
+#define I82875P_DRB_SHIFT 26	/* 64MiB grain */
+#define I82875P_DRB		0x00	/* DRAM Row Boundary (8b x 8)
+					 *
+					 *  7    reserved
+					 *  6:0  64MiB row boundary addr
+					 */
+
+#define I82875P_DRA		0x10	/* DRAM Row Attribute (4b x 8)
+					 *
+					 *  7    reserved
+					 *  6:4  row attr row 1
+					 *  3    reserved
+					 *  2:0  row attr row 0
+					 *
+					 * 000 =  4KiB
+					 * 001 =  8KiB
+					 * 010 = 16KiB
+					 * 011 = 32KiB
+					 */
+
+#define I82875P_DRC		0x68	/* DRAM Controller Mode (32b)
+					 *
+					 * 31:30 reserved
+					 * 29    init complete
+					 * 28:23 reserved
+					 * 22:21 nr chan 00=1,01=2
+					 * 20    reserved
+					 * 19:18 Data Integ Mode 00=none,01=ecc
+					 * 17:11 reserved
+					 * 10:8  refresh mode
+					 *  7    reserved
+					 *  6:4  mode select
+					 *  3:2  reserved
+					 *  1:0  DRAM type 01=DDR
+					 */
+
+enum i82875p_chips {
+	I82875P = 0,
+};
+
+struct i82875p_pvt {
+	struct pci_dev *ovrfl_pdev;
+	void __iomem *ovrfl_window;
+};
+
+struct i82875p_dev_info {
+	const char *ctl_name;
+};
+
+struct i82875p_error_info {
+	u16 errsts;
+	u32 eap;
+	u8 des;
+	u8 derrsyn;
+	u16 errsts2;
+};
+
+static const struct i82875p_dev_info i82875p_devs[] = {
+	[I82875P] = {
+		.ctl_name = "i82875p"},
+};
+
+static struct pci_dev *mci_pdev;	/* init dev: in case that AGP code has
+					 * already registered driver
+					 */
+
+static struct edac_pci_ctl_info *i82875p_pci;
+
+static void i82875p_get_error_info(struct mem_ctl_info *mci,
+				struct i82875p_error_info *info)
+{
+	struct pci_dev *pdev;
+
+	pdev = to_pci_dev(mci->pdev);
+
+	/*
+	 * This is a mess because there is no atomic way to read all the
+	 * registers at once and the registers can transition from CE being
+	 * overwritten by UE.
+	 */
+	pci_read_config_word(pdev, I82875P_ERRSTS, &info->errsts);
+
+	if (!(info->errsts & 0x0081))
+		return;
+
+	pci_read_config_dword(pdev, I82875P_EAP, &info->eap);
+	pci_read_config_byte(pdev, I82875P_DES, &info->des);
+	pci_read_config_byte(pdev, I82875P_DERRSYN, &info->derrsyn);
+	pci_read_config_word(pdev, I82875P_ERRSTS, &info->errsts2);
+
+	/*
+	 * If the error is the same then we can for both reads then
+	 * the first set of reads is valid.  If there is a change then
+	 * there is a CE no info and the second set of reads is valid
+	 * and should be UE info.
+	 */
+	if ((info->errsts ^ info->errsts2) & 0x0081) {
+		pci_read_config_dword(pdev, I82875P_EAP, &info->eap);
+		pci_read_config_byte(pdev, I82875P_DES, &info->des);
+		pci_read_config_byte(pdev, I82875P_DERRSYN, &info->derrsyn);
+	}
+
+	pci_write_bits16(pdev, I82875P_ERRSTS, 0x0081, 0x0081);
+}
+
+static int i82875p_process_error_info(struct mem_ctl_info *mci,
+				struct i82875p_error_info *info,
+				int handle_errors)
+{
+	int row, multi_chan;
+
+	multi_chan = mci->csrows[0]->nr_channels - 1;
+
+	if (!(info->errsts & 0x0081))
+		return 0;
+
+	if (!handle_errors)
+		return 1;
+
+	if ((info->errsts ^ info->errsts2) & 0x0081) {
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
+				     -1, -1, -1,
+				     "UE overwrote CE", "");
+		info->errsts = info->errsts2;
+	}
+
+	info->eap >>= PAGE_SHIFT;
+	row = edac_mc_find_csrow_by_page(mci, info->eap);
+
+	if (info->errsts & 0x0080)
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+				     info->eap, 0, 0,
+				     row, -1, -1,
+				     "i82875p UE", "");
+	else
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+				     info->eap, 0, info->derrsyn,
+				     row, multi_chan ? (info->des & 0x1) : 0,
+				     -1, "i82875p CE", "");
+
+	return 1;
+}
+
+static void i82875p_check(struct mem_ctl_info *mci)
+{
+	struct i82875p_error_info info;
+
+	edac_dbg(1, "MC%d\n", mci->mc_idx);
+	i82875p_get_error_info(mci, &info);
+	i82875p_process_error_info(mci, &info, 1);
+}
+
+/* Return 0 on success or 1 on failure. */
+static int i82875p_setup_overfl_dev(struct pci_dev *pdev,
+				struct pci_dev **ovrfl_pdev,
+				void __iomem **ovrfl_window)
+{
+	struct pci_dev *dev;
+	void __iomem *window;
+
+	*ovrfl_pdev = NULL;
+	*ovrfl_window = NULL;
+	dev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL);
+
+	if (dev == NULL) {
+		/* Intel tells BIOS developers to hide device 6 which
+		 * configures the overflow device access containing
+		 * the DRBs - this is where we expose device 6.
+		 * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm
+		 */
+		pci_write_bits8(pdev, 0xf4, 0x2, 0x2);
+		dev = pci_scan_single_device(pdev->bus, PCI_DEVFN(6, 0));
+
+		if (dev == NULL)
+			return 1;
+
+		pci_bus_assign_resources(dev->bus);
+		pci_bus_add_device(dev);
+	}
+
+	*ovrfl_pdev = dev;
+
+	if (pci_enable_device(dev)) {
+		i82875p_printk(KERN_ERR, "%s(): Failed to enable overflow "
+			"device\n", __func__);
+		return 1;
+	}
+
+	if (pci_request_regions(dev, pci_name(dev))) {
+#ifdef CORRECT_BIOS
+		goto fail0;
+#endif
+	}
+
+	/* cache is irrelevant for PCI bus reads/writes */
+	window = pci_ioremap_bar(dev, 0);
+	if (window == NULL) {
+		i82875p_printk(KERN_ERR, "%s(): Failed to ioremap bar6\n",
+			__func__);
+		goto fail1;
+	}
+
+	*ovrfl_window = window;
+	return 0;
+
+fail1:
+	pci_release_regions(dev);
+
+#ifdef CORRECT_BIOS
+fail0:
+	pci_disable_device(dev);
+#endif
+	/* NOTE: the ovrfl proc entry and pci_dev are intentionally left */
+	return 1;
+}
+
+/* Return 1 if dual channel mode is active.  Else return 0. */
+static inline int dual_channel_active(u32 drc)
+{
+	return (drc >> 21) & 0x1;
+}
+
+static void i82875p_init_csrows(struct mem_ctl_info *mci,
+				struct pci_dev *pdev,
+				void __iomem * ovrfl_window, u32 drc)
+{
+	struct csrow_info *csrow;
+	struct dimm_info *dimm;
+	unsigned nr_chans = dual_channel_active(drc) + 1;
+	unsigned long last_cumul_size;
+	u8 value;
+	u32 drc_ddim;		/* DRAM Data Integrity Mode 0=none,2=edac */
+	u32 cumul_size, nr_pages;
+	int index, j;
+
+	drc_ddim = (drc >> 18) & 0x1;
+	last_cumul_size = 0;
+
+	/* The dram row boundary (DRB) reg values are boundary address
+	 * for each DRAM row with a granularity of 32 or 64MB (single/dual
+	 * channel operation).  DRB regs are cumulative; therefore DRB7 will
+	 * contain the total memory contained in all eight rows.
+	 */
+
+	for (index = 0; index < mci->nr_csrows; index++) {
+		csrow = mci->csrows[index];
+
+		value = readb(ovrfl_window + I82875P_DRB + index);
+		cumul_size = value << (I82875P_DRB_SHIFT - PAGE_SHIFT);
+		edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size);
+		if (cumul_size == last_cumul_size)
+			continue;	/* not populated */
+
+		csrow->first_page = last_cumul_size;
+		csrow->last_page = cumul_size - 1;
+		nr_pages = cumul_size - last_cumul_size;
+		last_cumul_size = cumul_size;
+
+		for (j = 0; j < nr_chans; j++) {
+			dimm = csrow->channels[j]->dimm;
+
+			dimm->nr_pages = nr_pages / nr_chans;
+			dimm->grain = 1 << 12;	/* I82875P_EAP has 4KiB reolution */
+			dimm->mtype = MEM_DDR;
+			dimm->dtype = DEV_UNKNOWN;
+			dimm->edac_mode = drc_ddim ? EDAC_SECDED : EDAC_NONE;
+		}
+	}
+}
+
+static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
+{
+	int rc = -ENODEV;
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[2];
+	struct i82875p_pvt *pvt;
+	struct pci_dev *ovrfl_pdev;
+	void __iomem *ovrfl_window;
+	u32 drc;
+	u32 nr_chans;
+	struct i82875p_error_info discard;
+
+	edac_dbg(0, "\n");
+
+	if (i82875p_setup_overfl_dev(pdev, &ovrfl_pdev, &ovrfl_window))
+		return -ENODEV;
+	drc = readl(ovrfl_window + I82875P_DRC);
+	nr_chans = dual_channel_active(drc) + 1;
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = I82875P_NR_CSROWS(nr_chans);
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = nr_chans;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt));
+	if (!mci) {
+		rc = -ENOMEM;
+		goto fail0;
+	}
+
+	edac_dbg(3, "init mci\n");
+	mci->pdev = &pdev->dev;
+	mci->mtype_cap = MEM_FLAG_DDR;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_UNKNOWN;
+	mci->mod_name = EDAC_MOD_STR;
+	mci->ctl_name = i82875p_devs[dev_idx].ctl_name;
+	mci->dev_name = pci_name(pdev);
+	mci->edac_check = i82875p_check;
+	mci->ctl_page_to_phys = NULL;
+	edac_dbg(3, "init pvt\n");
+	pvt = (struct i82875p_pvt *)mci->pvt_info;
+	pvt->ovrfl_pdev = ovrfl_pdev;
+	pvt->ovrfl_window = ovrfl_window;
+	i82875p_init_csrows(mci, pdev, ovrfl_window, drc);
+	i82875p_get_error_info(mci, &discard);	/* clear counters */
+
+	/* Here we assume that we will never see multiple instances of this
+	 * type of memory controller.  The ID is therefore hardcoded to 0.
+	 */
+	if (edac_mc_add_mc(mci)) {
+		edac_dbg(3, "failed edac_mc_add_mc()\n");
+		goto fail1;
+	}
+
+	/* allocating generic PCI control info */
+	i82875p_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
+	if (!i82875p_pci) {
+		printk(KERN_WARNING
+			"%s(): Unable to create PCI control\n",
+			__func__);
+		printk(KERN_WARNING
+			"%s(): PCI error report via EDAC not setup\n",
+			__func__);
+	}
+
+	/* get this far and it's successful */
+	edac_dbg(3, "success\n");
+	return 0;
+
+fail1:
+	edac_mc_free(mci);
+
+fail0:
+	iounmap(ovrfl_window);
+	pci_release_regions(ovrfl_pdev);
+
+	pci_disable_device(ovrfl_pdev);
+	/* NOTE: the ovrfl proc entry and pci_dev are intentionally left */
+	return rc;
+}
+
+/* returns count (>= 0), or negative on error */
+static int i82875p_init_one(struct pci_dev *pdev,
+			    const struct pci_device_id *ent)
+{
+	int rc;
+
+	edac_dbg(0, "\n");
+	i82875p_printk(KERN_INFO, "i82875p init one\n");
+
+	if (pci_enable_device(pdev) < 0)
+		return -EIO;
+
+	rc = i82875p_probe1(pdev, ent->driver_data);
+
+	if (mci_pdev == NULL)
+		mci_pdev = pci_dev_get(pdev);
+
+	return rc;
+}
+
+static void i82875p_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+	struct i82875p_pvt *pvt = NULL;
+
+	edac_dbg(0, "\n");
+
+	if (i82875p_pci)
+		edac_pci_release_generic_ctl(i82875p_pci);
+
+	if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
+		return;
+
+	pvt = (struct i82875p_pvt *)mci->pvt_info;
+
+	if (pvt->ovrfl_window)
+		iounmap(pvt->ovrfl_window);
+
+	if (pvt->ovrfl_pdev) {
+#ifdef CORRECT_BIOS
+		pci_release_regions(pvt->ovrfl_pdev);
+#endif				/*CORRECT_BIOS */
+		pci_disable_device(pvt->ovrfl_pdev);
+		pci_dev_put(pvt->ovrfl_pdev);
+	}
+
+	edac_mc_free(mci);
+}
+
+static const struct pci_device_id i82875p_pci_tbl[] = {
+	{
+	 PCI_VEND_DEV(INTEL, 82875_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	 I82875P},
+	{
+	 0,
+	 }			/* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, i82875p_pci_tbl);
+
+static struct pci_driver i82875p_driver = {
+	.name = EDAC_MOD_STR,
+	.probe = i82875p_init_one,
+	.remove = i82875p_remove_one,
+	.id_table = i82875p_pci_tbl,
+};
+
+static int __init i82875p_init(void)
+{
+	int pci_rc;
+
+	edac_dbg(3, "\n");
+
+       /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+       opstate_init();
+
+	pci_rc = pci_register_driver(&i82875p_driver);
+
+	if (pci_rc < 0)
+		goto fail0;
+
+	if (mci_pdev == NULL) {
+		mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+					PCI_DEVICE_ID_INTEL_82875_0, NULL);
+
+		if (!mci_pdev) {
+			edac_dbg(0, "875p pci_get_device fail\n");
+			pci_rc = -ENODEV;
+			goto fail1;
+		}
+
+		pci_rc = i82875p_init_one(mci_pdev, i82875p_pci_tbl);
+
+		if (pci_rc < 0) {
+			edac_dbg(0, "875p init fail\n");
+			pci_rc = -ENODEV;
+			goto fail1;
+		}
+	}
+
+	return 0;
+
+fail1:
+	pci_unregister_driver(&i82875p_driver);
+
+fail0:
+	pci_dev_put(mci_pdev);
+	return pci_rc;
+}
+
+static void __exit i82875p_exit(void)
+{
+	edac_dbg(3, "\n");
+
+	i82875p_remove_one(mci_pdev);
+	pci_dev_put(mci_pdev);
+
+	pci_unregister_driver(&i82875p_driver);
+
+}
+
+module_init(i82875p_init);
+module_exit(i82875p_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh");
+MODULE_DESCRIPTION("MC support for Intel 82875 memory hub controllers");
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/edac/i82975x_edac.c b/drivers/edac/i82975x_edac.c
new file mode 100644
index 000000000..892815eaa
--- /dev/null
+++ b/drivers/edac/i82975x_edac.c
@@ -0,0 +1,714 @@
+/*
+ * Intel 82975X Memory Controller kernel module
+ * (C) 2007 aCarLab (India) Pvt. Ltd. (http://acarlab.com)
+ * (C) 2007 jetzbroadband (http://jetzbroadband.com)
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Written by Arvind R.
+ *   Copied from i82875p_edac.c source:
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/edac.h>
+#include "edac_module.h"
+
+#define EDAC_MOD_STR		"i82975x_edac"
+
+#define i82975x_printk(level, fmt, arg...) \
+	edac_printk(level, "i82975x", fmt, ##arg)
+
+#define i82975x_mc_printk(mci, level, fmt, arg...) \
+	edac_mc_chipset_printk(mci, level, "i82975x", fmt, ##arg)
+
+#ifndef PCI_DEVICE_ID_INTEL_82975_0
+#define PCI_DEVICE_ID_INTEL_82975_0	0x277c
+#endif				/* PCI_DEVICE_ID_INTEL_82975_0 */
+
+#define I82975X_NR_DIMMS		8
+#define I82975X_NR_CSROWS(nr_chans)	(I82975X_NR_DIMMS / (nr_chans))
+
+/* Intel 82975X register addresses - device 0 function 0 - DRAM Controller */
+#define I82975X_EAP		0x58	/* Dram Error Address Pointer (32b)
+					 *
+					 * 31:7  128 byte cache-line address
+					 * 6:1   reserved
+					 * 0     0: CH0; 1: CH1
+					 */
+
+#define I82975X_DERRSYN		0x5c	/* Dram Error SYNdrome (8b)
+					 *
+					 *  7:0  DRAM ECC Syndrome
+					 */
+
+#define I82975X_DES		0x5d	/* Dram ERRor DeSTination (8b)
+					 * 0h:    Processor Memory Reads
+					 * 1h:7h  reserved
+					 * More - See Page 65 of Intel DocSheet.
+					 */
+
+#define I82975X_ERRSTS		0xc8	/* Error Status Register (16b)
+					 *
+					 * 15:12 reserved
+					 * 11    Thermal Sensor Event
+					 * 10    reserved
+					 *  9    non-DRAM lock error (ndlock)
+					 *  8    Refresh Timeout
+					 *  7:2  reserved
+					 *  1    ECC UE (multibit DRAM error)
+					 *  0    ECC CE (singlebit DRAM error)
+					 */
+
+/* Error Reporting is supported by 3 mechanisms:
+  1. DMI SERR generation  ( ERRCMD )
+  2. SMI DMI  generation  ( SMICMD )
+  3. SCI DMI  generation  ( SCICMD )
+NOTE: Only ONE of the three must be enabled
+*/
+#define I82975X_ERRCMD		0xca	/* Error Command (16b)
+					 *
+					 * 15:12 reserved
+					 * 11    Thermal Sensor Event
+					 * 10    reserved
+					 *  9    non-DRAM lock error (ndlock)
+					 *  8    Refresh Timeout
+					 *  7:2  reserved
+					 *  1    ECC UE (multibit DRAM error)
+					 *  0    ECC CE (singlebit DRAM error)
+					 */
+
+#define I82975X_SMICMD		0xcc	/* Error Command (16b)
+					 *
+					 * 15:2  reserved
+					 *  1    ECC UE (multibit DRAM error)
+					 *  0    ECC CE (singlebit DRAM error)
+					 */
+
+#define I82975X_SCICMD		0xce	/* Error Command (16b)
+					 *
+					 * 15:2  reserved
+					 *  1    ECC UE (multibit DRAM error)
+					 *  0    ECC CE (singlebit DRAM error)
+					 */
+
+#define I82975X_XEAP	0xfc	/* Extended Dram Error Address Pointer (8b)
+					 *
+					 * 7:1   reserved
+					 * 0     Bit32 of the Dram Error Address
+					 */
+
+#define I82975X_MCHBAR		0x44	/*
+					 *
+					 * 31:14 Base Addr of 16K memory-mapped
+					 *	configuration space
+					 * 13:1  reserverd
+					 *  0    mem-mapped config space enable
+					 */
+
+/* NOTE: Following addresses have to indexed using MCHBAR offset (44h, 32b) */
+/* Intel 82975x memory mapped register space */
+
+#define I82975X_DRB_SHIFT 25	/* fixed 32MiB grain */
+
+#define I82975X_DRB		0x100	/* DRAM Row Boundary (8b x 8)
+					 *
+					 * 7   set to 1 in highest DRB of
+					 *	channel if 4GB in ch.
+					 * 6:2 upper boundary of rank in
+					 *	32MB grains
+					 * 1:0 set to 0
+					 */
+#define I82975X_DRB_CH0R0		0x100
+#define I82975X_DRB_CH0R1		0x101
+#define I82975X_DRB_CH0R2		0x102
+#define I82975X_DRB_CH0R3		0x103
+#define I82975X_DRB_CH1R0		0x180
+#define I82975X_DRB_CH1R1		0x181
+#define I82975X_DRB_CH1R2		0x182
+#define I82975X_DRB_CH1R3		0x183
+
+
+#define I82975X_DRA		0x108	/* DRAM Row Attribute (4b x 8)
+					 *  defines the PAGE SIZE to be used
+					 *	for the rank
+					 *  7    reserved
+					 *  6:4  row attr of odd rank, i.e. 1
+					 *  3    reserved
+					 *  2:0  row attr of even rank, i.e. 0
+					 *
+					 * 000 = unpopulated
+					 * 001 = reserved
+					 * 010 = 4KiB
+					 * 011 = 8KiB
+					 * 100 = 16KiB
+					 * others = reserved
+					 */
+#define I82975X_DRA_CH0R01		0x108
+#define I82975X_DRA_CH0R23		0x109
+#define I82975X_DRA_CH1R01		0x188
+#define I82975X_DRA_CH1R23		0x189
+
+
+#define I82975X_BNKARC	0x10e /* Type of device in each rank - Bank Arch (16b)
+					 *
+					 * 15:8  reserved
+					 * 7:6  Rank 3 architecture
+					 * 5:4  Rank 2 architecture
+					 * 3:2  Rank 1 architecture
+					 * 1:0  Rank 0 architecture
+					 *
+					 * 00 => 4 banks
+					 * 01 => 8 banks
+					 */
+#define I82975X_C0BNKARC	0x10e
+#define I82975X_C1BNKARC	0x18e
+
+
+
+#define I82975X_DRC		0x120 /* DRAM Controller Mode0 (32b)
+					 *
+					 * 31:30 reserved
+					 * 29    init complete
+					 * 28:11 reserved, according to Intel
+					 *    22:21 number of channels
+					 *		00=1 01=2 in 82875
+					 *		seems to be ECC mode
+					 *		bits in 82975 in Asus
+					 *		P5W
+					 *	 19:18 Data Integ Mode
+					 *		00=none 01=ECC in 82875
+					 * 10:8  refresh mode
+					 *  7    reserved
+					 *  6:4  mode select
+					 *  3:2  reserved
+					 *  1:0  DRAM type 10=Second Revision
+					 *		DDR2 SDRAM
+					 *         00, 01, 11 reserved
+					 */
+#define I82975X_DRC_CH0M0		0x120
+#define I82975X_DRC_CH1M0		0x1A0
+
+
+#define I82975X_DRC_M1	0x124 /* DRAM Controller Mode1 (32b)
+					 * 31	0=Standard Address Map
+					 *	1=Enhanced Address Map
+					 * 30:0	reserved
+					 */
+
+#define I82975X_DRC_CH0M1		0x124
+#define I82975X_DRC_CH1M1		0x1A4
+
+enum i82975x_chips {
+	I82975X = 0,
+};
+
+struct i82975x_pvt {
+	void __iomem *mch_window;
+};
+
+struct i82975x_dev_info {
+	const char *ctl_name;
+};
+
+struct i82975x_error_info {
+	u16 errsts;
+	u32 eap;
+	u8 des;
+	u8 derrsyn;
+	u16 errsts2;
+	u8 chan;		/* the channel is bit 0 of EAP */
+	u8 xeap;		/* extended eap bit */
+};
+
+static const struct i82975x_dev_info i82975x_devs[] = {
+	[I82975X] = {
+		.ctl_name = "i82975x"
+	},
+};
+
+static struct pci_dev *mci_pdev;	/* init dev: in case that AGP code has
+					 * already registered driver
+					 */
+
+static int i82975x_registered = 1;
+
+static void i82975x_get_error_info(struct mem_ctl_info *mci,
+		struct i82975x_error_info *info)
+{
+	struct pci_dev *pdev;
+
+	pdev = to_pci_dev(mci->pdev);
+
+	/*
+	 * This is a mess because there is no atomic way to read all the
+	 * registers at once and the registers can transition from CE being
+	 * overwritten by UE.
+	 */
+	pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts);
+	pci_read_config_dword(pdev, I82975X_EAP, &info->eap);
+	pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap);
+	pci_read_config_byte(pdev, I82975X_DES, &info->des);
+	pci_read_config_byte(pdev, I82975X_DERRSYN, &info->derrsyn);
+	pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts2);
+
+	pci_write_bits16(pdev, I82975X_ERRSTS, 0x0003, 0x0003);
+
+	/*
+	 * If the error is the same then we can for both reads then
+	 * the first set of reads is valid.  If there is a change then
+	 * there is a CE no info and the second set of reads is valid
+	 * and should be UE info.
+	 */
+	if (!(info->errsts2 & 0x0003))
+		return;
+
+	if ((info->errsts ^ info->errsts2) & 0x0003) {
+		pci_read_config_dword(pdev, I82975X_EAP, &info->eap);
+		pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap);
+		pci_read_config_byte(pdev, I82975X_DES, &info->des);
+		pci_read_config_byte(pdev, I82975X_DERRSYN,
+				&info->derrsyn);
+	}
+}
+
+static int i82975x_process_error_info(struct mem_ctl_info *mci,
+		struct i82975x_error_info *info, int handle_errors)
+{
+	int row, chan;
+	unsigned long offst, page;
+
+	if (!(info->errsts2 & 0x0003))
+		return 0;
+
+	if (!handle_errors)
+		return 1;
+
+	if ((info->errsts ^ info->errsts2) & 0x0003) {
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
+				     -1, -1, -1, "UE overwrote CE", "");
+		info->errsts = info->errsts2;
+	}
+
+	page = (unsigned long) info->eap;
+	page >>= 1;
+	if (info->xeap & 1)
+		page |= 0x80000000;
+	page >>= (PAGE_SHIFT - 1);
+	row = edac_mc_find_csrow_by_page(mci, page);
+
+	if (row == -1)	{
+		i82975x_mc_printk(mci, KERN_ERR, "error processing EAP:\n"
+			"\tXEAP=%u\n"
+			"\t EAP=0x%08x\n"
+			"\tPAGE=0x%08x\n",
+			(info->xeap & 1) ? 1 : 0, info->eap, (unsigned int) page);
+		return 0;
+	}
+	chan = (mci->csrows[row]->nr_channels == 1) ? 0 : info->eap & 1;
+	offst = info->eap
+			& ((1 << PAGE_SHIFT) -
+			   (1 << mci->csrows[row]->channels[chan]->dimm->grain));
+
+	if (info->errsts & 0x0002)
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+				     page, offst, 0,
+				     row, -1, -1,
+				     "i82975x UE", "");
+	else
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+				     page, offst, info->derrsyn,
+				     row, chan ? chan : 0, -1,
+				     "i82975x CE", "");
+
+	return 1;
+}
+
+static void i82975x_check(struct mem_ctl_info *mci)
+{
+	struct i82975x_error_info info;
+
+	edac_dbg(1, "MC%d\n", mci->mc_idx);
+	i82975x_get_error_info(mci, &info);
+	i82975x_process_error_info(mci, &info, 1);
+}
+
+/* Return 1 if dual channel mode is active.  Else return 0. */
+static int dual_channel_active(void __iomem *mch_window)
+{
+	/*
+	 * We treat interleaved-symmetric configuration as dual-channel - EAP's
+	 * bit-0 giving the channel of the error location.
+	 *
+	 * All other configurations are treated as single channel - the EAP's
+	 * bit-0 will resolve ok in symmetric area of mixed
+	 * (symmetric/asymmetric) configurations
+	 */
+	u8	drb[4][2];
+	int	row;
+	int    dualch;
+
+	for (dualch = 1, row = 0; dualch && (row < 4); row++) {
+		drb[row][0] = readb(mch_window + I82975X_DRB + row);
+		drb[row][1] = readb(mch_window + I82975X_DRB + row + 0x80);
+		dualch = dualch && (drb[row][0] == drb[row][1]);
+	}
+	return dualch;
+}
+
+static enum dev_type i82975x_dram_type(void __iomem *mch_window, int rank)
+{
+	/*
+	 * ECC is possible on i92975x ONLY with DEV_X8
+	 */
+	return DEV_X8;
+}
+
+static void i82975x_init_csrows(struct mem_ctl_info *mci,
+		struct pci_dev *pdev, void __iomem *mch_window)
+{
+	struct csrow_info *csrow;
+	unsigned long last_cumul_size;
+	u8 value;
+	u32 cumul_size, nr_pages;
+	int index, chan;
+	struct dimm_info *dimm;
+	enum dev_type dtype;
+
+	last_cumul_size = 0;
+
+	/*
+	 * 82875 comment:
+	 * The dram row boundary (DRB) reg values are boundary address
+	 * for each DRAM row with a granularity of 32 or 64MB (single/dual
+	 * channel operation).  DRB regs are cumulative; therefore DRB7 will
+	 * contain the total memory contained in all rows.
+	 *
+	 */
+
+	for (index = 0; index < mci->nr_csrows; index++) {
+		csrow = mci->csrows[index];
+
+		value = readb(mch_window + I82975X_DRB + index +
+					((index >= 4) ? 0x80 : 0));
+		cumul_size = value;
+		cumul_size <<= (I82975X_DRB_SHIFT - PAGE_SHIFT);
+		/*
+		 * Adjust cumul_size w.r.t number of channels
+		 *
+		 */
+		if (csrow->nr_channels > 1)
+			cumul_size <<= 1;
+		edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size);
+
+		nr_pages = cumul_size - last_cumul_size;
+		if (!nr_pages)
+			continue;
+
+		/*
+		 * Initialise dram labels
+		 * index values:
+		 *   [0-7] for single-channel; i.e. csrow->nr_channels = 1
+		 *   [0-3] for dual-channel; i.e. csrow->nr_channels = 2
+		 */
+		dtype = i82975x_dram_type(mch_window, index);
+		for (chan = 0; chan < csrow->nr_channels; chan++) {
+			dimm = mci->csrows[index]->channels[chan]->dimm;
+
+			dimm->nr_pages = nr_pages / csrow->nr_channels;
+
+			snprintf(csrow->channels[chan]->dimm->label, EDAC_MC_LABEL_LEN, "DIMM %c%d",
+				 (chan == 0) ? 'A' : 'B',
+				 index);
+			dimm->grain = 1 << 7;	/* 128Byte cache-line resolution */
+			dimm->dtype = i82975x_dram_type(mch_window, index);
+			dimm->mtype = MEM_DDR2; /* I82975x supports only DDR2 */
+			dimm->edac_mode = EDAC_SECDED; /* only supported */
+		}
+
+		csrow->first_page = last_cumul_size;
+		csrow->last_page = cumul_size - 1;
+		last_cumul_size = cumul_size;
+	}
+}
+
+/* #define  i82975x_DEBUG_IOMEM */
+
+#ifdef i82975x_DEBUG_IOMEM
+static void i82975x_print_dram_timings(void __iomem *mch_window)
+{
+	/*
+	 * The register meanings are from Intel specs;
+	 * (shows 13-5-5-5 for 800-DDR2)
+	 * Asus P5W Bios reports 15-5-4-4
+	 * What's your religion?
+	 */
+	static const int caslats[4] = { 5, 4, 3, 6 };
+	u32	dtreg[2];
+
+	dtreg[0] = readl(mch_window + 0x114);
+	dtreg[1] = readl(mch_window + 0x194);
+	i82975x_printk(KERN_INFO, "DRAM Timings :     Ch0    Ch1\n"
+		"                RAS Active Min = %d     %d\n"
+		"                CAS latency    =  %d      %d\n"
+		"                RAS to CAS     =  %d      %d\n"
+		"                RAS precharge  =  %d      %d\n",
+		(dtreg[0] >> 19 ) & 0x0f,
+			(dtreg[1] >> 19) & 0x0f,
+		caslats[(dtreg[0] >> 8) & 0x03],
+			caslats[(dtreg[1] >> 8) & 0x03],
+		((dtreg[0] >> 4) & 0x07) + 2,
+			((dtreg[1] >> 4) & 0x07) + 2,
+		(dtreg[0] & 0x07) + 2,
+			(dtreg[1] & 0x07) + 2
+	);
+
+}
+#endif
+
+static int i82975x_probe1(struct pci_dev *pdev, int dev_idx)
+{
+	int rc = -ENODEV;
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[2];
+	struct i82975x_pvt *pvt;
+	void __iomem *mch_window;
+	u32 mchbar;
+	u32 drc[2];
+	struct i82975x_error_info discard;
+	int	chans;
+#ifdef i82975x_DEBUG_IOMEM
+	u8 c0drb[4];
+	u8 c1drb[4];
+#endif
+
+	edac_dbg(0, "\n");
+
+	pci_read_config_dword(pdev, I82975X_MCHBAR, &mchbar);
+	if (!(mchbar & 1)) {
+		edac_dbg(3, "failed, MCHBAR disabled!\n");
+		goto fail0;
+	}
+	mchbar &= 0xffffc000;	/* bits 31:14 used for 16K window */
+	mch_window = ioremap_nocache(mchbar, 0x1000);
+	if (!mch_window) {
+		edac_dbg(3, "error ioremapping MCHBAR!\n");
+		goto fail0;
+	}
+
+#ifdef i82975x_DEBUG_IOMEM
+	i82975x_printk(KERN_INFO, "MCHBAR real = %0x, remapped = %p\n",
+					mchbar, mch_window);
+
+	c0drb[0] = readb(mch_window + I82975X_DRB_CH0R0);
+	c0drb[1] = readb(mch_window + I82975X_DRB_CH0R1);
+	c0drb[2] = readb(mch_window + I82975X_DRB_CH0R2);
+	c0drb[3] = readb(mch_window + I82975X_DRB_CH0R3);
+	c1drb[0] = readb(mch_window + I82975X_DRB_CH1R0);
+	c1drb[1] = readb(mch_window + I82975X_DRB_CH1R1);
+	c1drb[2] = readb(mch_window + I82975X_DRB_CH1R2);
+	c1drb[3] = readb(mch_window + I82975X_DRB_CH1R3);
+	i82975x_printk(KERN_INFO, "DRBCH0R0 = 0x%02x\n", c0drb[0]);
+	i82975x_printk(KERN_INFO, "DRBCH0R1 = 0x%02x\n", c0drb[1]);
+	i82975x_printk(KERN_INFO, "DRBCH0R2 = 0x%02x\n", c0drb[2]);
+	i82975x_printk(KERN_INFO, "DRBCH0R3 = 0x%02x\n", c0drb[3]);
+	i82975x_printk(KERN_INFO, "DRBCH1R0 = 0x%02x\n", c1drb[0]);
+	i82975x_printk(KERN_INFO, "DRBCH1R1 = 0x%02x\n", c1drb[1]);
+	i82975x_printk(KERN_INFO, "DRBCH1R2 = 0x%02x\n", c1drb[2]);
+	i82975x_printk(KERN_INFO, "DRBCH1R3 = 0x%02x\n", c1drb[3]);
+#endif
+
+	drc[0] = readl(mch_window + I82975X_DRC_CH0M0);
+	drc[1] = readl(mch_window + I82975X_DRC_CH1M0);
+#ifdef i82975x_DEBUG_IOMEM
+	i82975x_printk(KERN_INFO, "DRC_CH0 = %0x, %s\n", drc[0],
+			((drc[0] >> 21) & 3) == 1 ?
+				"ECC enabled" : "ECC disabled");
+	i82975x_printk(KERN_INFO, "DRC_CH1 = %0x, %s\n", drc[1],
+			((drc[1] >> 21) & 3) == 1 ?
+				"ECC enabled" : "ECC disabled");
+
+	i82975x_printk(KERN_INFO, "C0 BNKARC = %0x\n",
+		readw(mch_window + I82975X_C0BNKARC));
+	i82975x_printk(KERN_INFO, "C1 BNKARC = %0x\n",
+		readw(mch_window + I82975X_C1BNKARC));
+	i82975x_print_dram_timings(mch_window);
+	goto fail1;
+#endif
+	if (!(((drc[0] >> 21) & 3) == 1 || ((drc[1] >> 21) & 3) == 1)) {
+		i82975x_printk(KERN_INFO, "ECC disabled on both channels.\n");
+		goto fail1;
+	}
+
+	chans = dual_channel_active(mch_window) + 1;
+
+	/* assuming only one controller, index thus is 0 */
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = I82975X_NR_DIMMS;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = I82975X_NR_CSROWS(chans);
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt));
+	if (!mci) {
+		rc = -ENOMEM;
+		goto fail1;
+	}
+
+	edac_dbg(3, "init mci\n");
+	mci->pdev = &pdev->dev;
+	mci->mtype_cap = MEM_FLAG_DDR2;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+	mci->mod_name = EDAC_MOD_STR;
+	mci->ctl_name = i82975x_devs[dev_idx].ctl_name;
+	mci->dev_name = pci_name(pdev);
+	mci->edac_check = i82975x_check;
+	mci->ctl_page_to_phys = NULL;
+	edac_dbg(3, "init pvt\n");
+	pvt = (struct i82975x_pvt *) mci->pvt_info;
+	pvt->mch_window = mch_window;
+	i82975x_init_csrows(mci, pdev, mch_window);
+	mci->scrub_mode = SCRUB_HW_SRC;
+	i82975x_get_error_info(mci, &discard);  /* clear counters */
+
+	/* finalize this instance of memory controller with edac core */
+	if (edac_mc_add_mc(mci)) {
+		edac_dbg(3, "failed edac_mc_add_mc()\n");
+		goto fail2;
+	}
+
+	/* get this far and it's successful */
+	edac_dbg(3, "success\n");
+	return 0;
+
+fail2:
+	edac_mc_free(mci);
+
+fail1:
+	iounmap(mch_window);
+fail0:
+	return rc;
+}
+
+/* returns count (>= 0), or negative on error */
+static int i82975x_init_one(struct pci_dev *pdev,
+			    const struct pci_device_id *ent)
+{
+	int rc;
+
+	edac_dbg(0, "\n");
+
+	if (pci_enable_device(pdev) < 0)
+		return -EIO;
+
+	rc = i82975x_probe1(pdev, ent->driver_data);
+
+	if (mci_pdev == NULL)
+		mci_pdev = pci_dev_get(pdev);
+
+	return rc;
+}
+
+static void i82975x_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+	struct i82975x_pvt *pvt;
+
+	edac_dbg(0, "\n");
+
+	mci = edac_mc_del_mc(&pdev->dev);
+	if (mci  == NULL)
+		return;
+
+	pvt = mci->pvt_info;
+	if (pvt->mch_window)
+		iounmap( pvt->mch_window );
+
+	edac_mc_free(mci);
+}
+
+static const struct pci_device_id i82975x_pci_tbl[] = {
+	{
+		PCI_VEND_DEV(INTEL, 82975_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		I82975X
+	},
+	{
+		0,
+	}	/* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, i82975x_pci_tbl);
+
+static struct pci_driver i82975x_driver = {
+	.name = EDAC_MOD_STR,
+	.probe = i82975x_init_one,
+	.remove = i82975x_remove_one,
+	.id_table = i82975x_pci_tbl,
+};
+
+static int __init i82975x_init(void)
+{
+	int pci_rc;
+
+	edac_dbg(3, "\n");
+
+       /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+       opstate_init();
+
+	pci_rc = pci_register_driver(&i82975x_driver);
+	if (pci_rc < 0)
+		goto fail0;
+
+	if (mci_pdev == NULL) {
+		mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				PCI_DEVICE_ID_INTEL_82975_0, NULL);
+
+		if (!mci_pdev) {
+			edac_dbg(0, "i82975x pci_get_device fail\n");
+			pci_rc = -ENODEV;
+			goto fail1;
+		}
+
+		pci_rc = i82975x_init_one(mci_pdev, i82975x_pci_tbl);
+
+		if (pci_rc < 0) {
+			edac_dbg(0, "i82975x init fail\n");
+			pci_rc = -ENODEV;
+			goto fail1;
+		}
+	}
+
+	return 0;
+
+fail1:
+	pci_unregister_driver(&i82975x_driver);
+
+fail0:
+	pci_dev_put(mci_pdev);
+	return pci_rc;
+}
+
+static void __exit i82975x_exit(void)
+{
+	edac_dbg(3, "\n");
+
+	pci_unregister_driver(&i82975x_driver);
+
+	if (!i82975x_registered) {
+		i82975x_remove_one(mci_pdev);
+		pci_dev_put(mci_pdev);
+	}
+}
+
+module_init(i82975x_init);
+module_exit(i82975x_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Arvind R. <arvino55@gmail.com>");
+MODULE_DESCRIPTION("MC support for Intel 82975 memory hub controllers");
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/edac/ie31200_edac.c b/drivers/edac/ie31200_edac.c
new file mode 100644
index 000000000..9e4781a80
--- /dev/null
+++ b/drivers/edac/ie31200_edac.c
@@ -0,0 +1,648 @@
+/*
+ * Intel E3-1200
+ * Copyright (C) 2014 Jason Baron <jbaron@akamai.com>
+ *
+ * Support for the E3-1200 processor family. Heavily based on previous
+ * Intel EDAC drivers.
+ *
+ * Since the DRAM controller is on the cpu chip, we can use its PCI device
+ * id to identify these processors.
+ *
+ * PCI DRAM controller device ids (Taken from The PCI ID Repository - http://pci-ids.ucw.cz/)
+ *
+ * 0108: Xeon E3-1200 Processor Family DRAM Controller
+ * 010c: Xeon E3-1200/2nd Generation Core Processor Family DRAM Controller
+ * 0150: Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller
+ * 0158: Xeon E3-1200 v2/Ivy Bridge DRAM Controller
+ * 015c: Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller
+ * 0c04: Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller
+ * 0c08: Xeon E3-1200 v3 Processor DRAM Controller
+ * 1918: Xeon E3-1200 v5 Skylake Host Bridge/DRAM Registers
+ * 5918: Xeon E3-1200 Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers
+ *
+ * Based on Intel specification:
+ * http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/xeon-e3-1200v3-vol-2-datasheet.pdf
+ * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e3-1200-family-vol-2-datasheet.html
+ * http://www.intel.com/content/www/us/en/processors/core/7th-gen-core-family-mobile-h-processor-lines-datasheet-vol-2.html
+ *
+ * According to the above datasheet (p.16):
+ * "
+ * 6. Software must not access B0/D0/F0 32-bit memory-mapped registers with
+ * requests that cross a DW boundary.
+ * "
+ *
+ * Thus, we make use of the explicit: lo_hi_readq(), which breaks the readq into
+ * 2 readl() calls. This restriction may be lifted in subsequent chip releases,
+ * but lo_hi_readq() ensures that we are safe across all e3-1200 processors.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/edac.h>
+
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include "edac_module.h"
+
+#define EDAC_MOD_STR "ie31200_edac"
+
+#define ie31200_printk(level, fmt, arg...) \
+	edac_printk(level, "ie31200", fmt, ##arg)
+
+#define PCI_DEVICE_ID_INTEL_IE31200_HB_1 0x0108
+#define PCI_DEVICE_ID_INTEL_IE31200_HB_2 0x010c
+#define PCI_DEVICE_ID_INTEL_IE31200_HB_3 0x0150
+#define PCI_DEVICE_ID_INTEL_IE31200_HB_4 0x0158
+#define PCI_DEVICE_ID_INTEL_IE31200_HB_5 0x015c
+#define PCI_DEVICE_ID_INTEL_IE31200_HB_6 0x0c04
+#define PCI_DEVICE_ID_INTEL_IE31200_HB_7 0x0c08
+#define PCI_DEVICE_ID_INTEL_IE31200_HB_8 0x1918
+#define PCI_DEVICE_ID_INTEL_IE31200_HB_9 0x5918
+
+#define IE31200_DIMMS			4
+#define IE31200_RANKS			8
+#define IE31200_RANKS_PER_CHANNEL	4
+#define IE31200_DIMMS_PER_CHANNEL	2
+#define IE31200_CHANNELS		2
+
+/* Intel IE31200 register addresses - device 0 function 0 - DRAM Controller */
+#define IE31200_MCHBAR_LOW		0x48
+#define IE31200_MCHBAR_HIGH		0x4c
+#define IE31200_MCHBAR_MASK		GENMASK_ULL(38, 15)
+#define IE31200_MMR_WINDOW_SIZE		BIT(15)
+
+/*
+ * Error Status Register (16b)
+ *
+ * 15    reserved
+ * 14    Isochronous TBWRR Run Behind FIFO Full
+ *       (ITCV)
+ * 13    Isochronous TBWRR Run Behind FIFO Put
+ *       (ITSTV)
+ * 12    reserved
+ * 11    MCH Thermal Sensor Event
+ *       for SMI/SCI/SERR (GTSE)
+ * 10    reserved
+ *  9    LOCK to non-DRAM Memory Flag (LCKF)
+ *  8    reserved
+ *  7    DRAM Throttle Flag (DTF)
+ *  6:2  reserved
+ *  1    Multi-bit DRAM ECC Error Flag (DMERR)
+ *  0    Single-bit DRAM ECC Error Flag (DSERR)
+ */
+#define IE31200_ERRSTS			0xc8
+#define IE31200_ERRSTS_UE		BIT(1)
+#define IE31200_ERRSTS_CE		BIT(0)
+#define IE31200_ERRSTS_BITS		(IE31200_ERRSTS_UE | IE31200_ERRSTS_CE)
+
+/*
+ * Channel 0 ECC Error Log (64b)
+ *
+ * 63:48 Error Column Address (ERRCOL)
+ * 47:32 Error Row Address (ERRROW)
+ * 31:29 Error Bank Address (ERRBANK)
+ * 28:27 Error Rank Address (ERRRANK)
+ * 26:24 reserved
+ * 23:16 Error Syndrome (ERRSYND)
+ * 15: 2 reserved
+ *    1  Multiple Bit Error Status (MERRSTS)
+ *    0  Correctable Error Status (CERRSTS)
+ */
+
+#define IE31200_C0ECCERRLOG			0x40c8
+#define IE31200_C1ECCERRLOG			0x44c8
+#define IE31200_C0ECCERRLOG_SKL			0x4048
+#define IE31200_C1ECCERRLOG_SKL			0x4448
+#define IE31200_ECCERRLOG_CE			BIT(0)
+#define IE31200_ECCERRLOG_UE			BIT(1)
+#define IE31200_ECCERRLOG_RANK_BITS		GENMASK_ULL(28, 27)
+#define IE31200_ECCERRLOG_RANK_SHIFT		27
+#define IE31200_ECCERRLOG_SYNDROME_BITS		GENMASK_ULL(23, 16)
+#define IE31200_ECCERRLOG_SYNDROME_SHIFT	16
+
+#define IE31200_ECCERRLOG_SYNDROME(log)		   \
+	((log & IE31200_ECCERRLOG_SYNDROME_BITS) >> \
+	 IE31200_ECCERRLOG_SYNDROME_SHIFT)
+
+#define IE31200_CAPID0			0xe4
+#define IE31200_CAPID0_PDCD		BIT(4)
+#define IE31200_CAPID0_DDPCD		BIT(6)
+#define IE31200_CAPID0_ECC		BIT(1)
+
+#define IE31200_MAD_DIMM_0_OFFSET		0x5004
+#define IE31200_MAD_DIMM_0_OFFSET_SKL		0x500C
+#define IE31200_MAD_DIMM_SIZE			GENMASK_ULL(7, 0)
+#define IE31200_MAD_DIMM_A_RANK			BIT(17)
+#define IE31200_MAD_DIMM_A_RANK_SHIFT		17
+#define IE31200_MAD_DIMM_A_RANK_SKL		BIT(10)
+#define IE31200_MAD_DIMM_A_RANK_SKL_SHIFT	10
+#define IE31200_MAD_DIMM_A_WIDTH		BIT(19)
+#define IE31200_MAD_DIMM_A_WIDTH_SHIFT		19
+#define IE31200_MAD_DIMM_A_WIDTH_SKL		GENMASK_ULL(9, 8)
+#define IE31200_MAD_DIMM_A_WIDTH_SKL_SHIFT	8
+
+/* Skylake reports 1GB increments, everything else is 256MB */
+#define IE31200_PAGES(n, skl)	\
+	(n << (28 + (2 * skl) - PAGE_SHIFT))
+
+static int nr_channels;
+static struct pci_dev *mci_pdev;
+static int ie31200_registered = 1;
+
+struct ie31200_priv {
+	void __iomem *window;
+	void __iomem *c0errlog;
+	void __iomem *c1errlog;
+};
+
+enum ie31200_chips {
+	IE31200 = 0,
+};
+
+struct ie31200_dev_info {
+	const char *ctl_name;
+};
+
+struct ie31200_error_info {
+	u16 errsts;
+	u16 errsts2;
+	u64 eccerrlog[IE31200_CHANNELS];
+};
+
+static const struct ie31200_dev_info ie31200_devs[] = {
+	[IE31200] = {
+		.ctl_name = "IE31200"
+	},
+};
+
+struct dimm_data {
+	u8 size; /* in multiples of 256MB, except Skylake is 1GB */
+	u8 dual_rank : 1,
+	   x16_width : 2; /* 0 means x8 width */
+};
+
+static int how_many_channels(struct pci_dev *pdev)
+{
+	int n_channels;
+	unsigned char capid0_2b; /* 2nd byte of CAPID0 */
+
+	pci_read_config_byte(pdev, IE31200_CAPID0 + 1, &capid0_2b);
+
+	/* check PDCD: Dual Channel Disable */
+	if (capid0_2b & IE31200_CAPID0_PDCD) {
+		edac_dbg(0, "In single channel mode\n");
+		n_channels = 1;
+	} else {
+		edac_dbg(0, "In dual channel mode\n");
+		n_channels = 2;
+	}
+
+	/* check DDPCD - check if both channels are filled */
+	if (capid0_2b & IE31200_CAPID0_DDPCD)
+		edac_dbg(0, "2 DIMMS per channel disabled\n");
+	else
+		edac_dbg(0, "2 DIMMS per channel enabled\n");
+
+	return n_channels;
+}
+
+static bool ecc_capable(struct pci_dev *pdev)
+{
+	unsigned char capid0_4b; /* 4th byte of CAPID0 */
+
+	pci_read_config_byte(pdev, IE31200_CAPID0 + 3, &capid0_4b);
+	if (capid0_4b & IE31200_CAPID0_ECC)
+		return false;
+	return true;
+}
+
+static int eccerrlog_row(u64 log)
+{
+	return ((log & IE31200_ECCERRLOG_RANK_BITS) >>
+				IE31200_ECCERRLOG_RANK_SHIFT);
+}
+
+static void ie31200_clear_error_info(struct mem_ctl_info *mci)
+{
+	/*
+	 * Clear any error bits.
+	 * (Yes, we really clear bits by writing 1 to them.)
+	 */
+	pci_write_bits16(to_pci_dev(mci->pdev), IE31200_ERRSTS,
+			 IE31200_ERRSTS_BITS, IE31200_ERRSTS_BITS);
+}
+
+static void ie31200_get_and_clear_error_info(struct mem_ctl_info *mci,
+					     struct ie31200_error_info *info)
+{
+	struct pci_dev *pdev;
+	struct ie31200_priv *priv = mci->pvt_info;
+
+	pdev = to_pci_dev(mci->pdev);
+
+	/*
+	 * This is a mess because there is no atomic way to read all the
+	 * registers at once and the registers can transition from CE being
+	 * overwritten by UE.
+	 */
+	pci_read_config_word(pdev, IE31200_ERRSTS, &info->errsts);
+	if (!(info->errsts & IE31200_ERRSTS_BITS))
+		return;
+
+	info->eccerrlog[0] = lo_hi_readq(priv->c0errlog);
+	if (nr_channels == 2)
+		info->eccerrlog[1] = lo_hi_readq(priv->c1errlog);
+
+	pci_read_config_word(pdev, IE31200_ERRSTS, &info->errsts2);
+
+	/*
+	 * If the error is the same for both reads then the first set
+	 * of reads is valid.  If there is a change then there is a CE
+	 * with no info and the second set of reads is valid and
+	 * should be UE info.
+	 */
+	if ((info->errsts ^ info->errsts2) & IE31200_ERRSTS_BITS) {
+		info->eccerrlog[0] = lo_hi_readq(priv->c0errlog);
+		if (nr_channels == 2)
+			info->eccerrlog[1] =
+				lo_hi_readq(priv->c1errlog);
+	}
+
+	ie31200_clear_error_info(mci);
+}
+
+static void ie31200_process_error_info(struct mem_ctl_info *mci,
+				       struct ie31200_error_info *info)
+{
+	int channel;
+	u64 log;
+
+	if (!(info->errsts & IE31200_ERRSTS_BITS))
+		return;
+
+	if ((info->errsts ^ info->errsts2) & IE31200_ERRSTS_BITS) {
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
+				     -1, -1, -1, "UE overwrote CE", "");
+		info->errsts = info->errsts2;
+	}
+
+	for (channel = 0; channel < nr_channels; channel++) {
+		log = info->eccerrlog[channel];
+		if (log & IE31200_ECCERRLOG_UE) {
+			edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+					     0, 0, 0,
+					     eccerrlog_row(log),
+					     channel, -1,
+					     "ie31200 UE", "");
+		} else if (log & IE31200_ECCERRLOG_CE) {
+			edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+					     0, 0,
+					     IE31200_ECCERRLOG_SYNDROME(log),
+					     eccerrlog_row(log),
+					     channel, -1,
+					     "ie31200 CE", "");
+		}
+	}
+}
+
+static void ie31200_check(struct mem_ctl_info *mci)
+{
+	struct ie31200_error_info info;
+
+	edac_dbg(1, "MC%d\n", mci->mc_idx);
+	ie31200_get_and_clear_error_info(mci, &info);
+	ie31200_process_error_info(mci, &info);
+}
+
+static void __iomem *ie31200_map_mchbar(struct pci_dev *pdev)
+{
+	union {
+		u64 mchbar;
+		struct {
+			u32 mchbar_low;
+			u32 mchbar_high;
+		};
+	} u;
+	void __iomem *window;
+
+	pci_read_config_dword(pdev, IE31200_MCHBAR_LOW, &u.mchbar_low);
+	pci_read_config_dword(pdev, IE31200_MCHBAR_HIGH, &u.mchbar_high);
+	u.mchbar &= IE31200_MCHBAR_MASK;
+
+	if (u.mchbar != (resource_size_t)u.mchbar) {
+		ie31200_printk(KERN_ERR, "mmio space beyond accessible range (0x%llx)\n",
+			       (unsigned long long)u.mchbar);
+		return NULL;
+	}
+
+	window = ioremap_nocache(u.mchbar, IE31200_MMR_WINDOW_SIZE);
+	if (!window)
+		ie31200_printk(KERN_ERR, "Cannot map mmio space at 0x%llx\n",
+			       (unsigned long long)u.mchbar);
+
+	return window;
+}
+
+static void __skl_populate_dimm_info(struct dimm_data *dd, u32 addr_decode,
+				     int chan)
+{
+	dd->size = (addr_decode >> (chan << 4)) & IE31200_MAD_DIMM_SIZE;
+	dd->dual_rank = (addr_decode & (IE31200_MAD_DIMM_A_RANK_SKL << (chan << 4))) ? 1 : 0;
+	dd->x16_width = ((addr_decode & (IE31200_MAD_DIMM_A_WIDTH_SKL << (chan << 4))) >>
+				(IE31200_MAD_DIMM_A_WIDTH_SKL_SHIFT + (chan << 4)));
+}
+
+static void __populate_dimm_info(struct dimm_data *dd, u32 addr_decode,
+				 int chan)
+{
+	dd->size = (addr_decode >> (chan << 3)) & IE31200_MAD_DIMM_SIZE;
+	dd->dual_rank = (addr_decode & (IE31200_MAD_DIMM_A_RANK << chan)) ? 1 : 0;
+	dd->x16_width = (addr_decode & (IE31200_MAD_DIMM_A_WIDTH << chan)) ? 1 : 0;
+}
+
+static void populate_dimm_info(struct dimm_data *dd, u32 addr_decode, int chan,
+			       bool skl)
+{
+	if (skl)
+		__skl_populate_dimm_info(dd, addr_decode, chan);
+	else
+		__populate_dimm_info(dd, addr_decode, chan);
+}
+
+
+static int ie31200_probe1(struct pci_dev *pdev, int dev_idx)
+{
+	int i, j, ret;
+	struct mem_ctl_info *mci = NULL;
+	struct edac_mc_layer layers[2];
+	struct dimm_data dimm_info[IE31200_CHANNELS][IE31200_DIMMS_PER_CHANNEL];
+	void __iomem *window;
+	struct ie31200_priv *priv;
+	u32 addr_decode, mad_offset;
+
+	/*
+	 * Kaby Lake seems to work like Skylake. Please re-visit this logic
+	 * when adding new CPU support.
+	 */
+	bool skl = (pdev->device >= PCI_DEVICE_ID_INTEL_IE31200_HB_8);
+
+	edac_dbg(0, "MC:\n");
+
+	if (!ecc_capable(pdev)) {
+		ie31200_printk(KERN_INFO, "No ECC support\n");
+		return -ENODEV;
+	}
+
+	nr_channels = how_many_channels(pdev);
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = IE31200_DIMMS;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = nr_channels;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
+			    sizeof(struct ie31200_priv));
+	if (!mci)
+		return -ENOMEM;
+
+	window = ie31200_map_mchbar(pdev);
+	if (!window) {
+		ret = -ENODEV;
+		goto fail_free;
+	}
+
+	edac_dbg(3, "MC: init mci\n");
+	mci->pdev = &pdev->dev;
+	if (skl)
+		mci->mtype_cap = MEM_FLAG_DDR4;
+	else
+		mci->mtype_cap = MEM_FLAG_DDR3;
+	mci->edac_ctl_cap = EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->mod_name = EDAC_MOD_STR;
+	mci->ctl_name = ie31200_devs[dev_idx].ctl_name;
+	mci->dev_name = pci_name(pdev);
+	mci->edac_check = ie31200_check;
+	mci->ctl_page_to_phys = NULL;
+	priv = mci->pvt_info;
+	priv->window = window;
+	if (skl) {
+		priv->c0errlog = window + IE31200_C0ECCERRLOG_SKL;
+		priv->c1errlog = window + IE31200_C1ECCERRLOG_SKL;
+		mad_offset = IE31200_MAD_DIMM_0_OFFSET_SKL;
+	} else {
+		priv->c0errlog = window + IE31200_C0ECCERRLOG;
+		priv->c1errlog = window + IE31200_C1ECCERRLOG;
+		mad_offset = IE31200_MAD_DIMM_0_OFFSET;
+	}
+
+	/* populate DIMM info */
+	for (i = 0; i < IE31200_CHANNELS; i++) {
+		addr_decode = readl(window + mad_offset +
+					(i * 4));
+		edac_dbg(0, "addr_decode: 0x%x\n", addr_decode);
+		for (j = 0; j < IE31200_DIMMS_PER_CHANNEL; j++) {
+			populate_dimm_info(&dimm_info[i][j], addr_decode, j,
+					   skl);
+			edac_dbg(0, "size: 0x%x, rank: %d, width: %d\n",
+				 dimm_info[i][j].size,
+				 dimm_info[i][j].dual_rank,
+				 dimm_info[i][j].x16_width);
+		}
+	}
+
+	/*
+	 * The dram rank boundary (DRB) reg values are boundary addresses
+	 * for each DRAM rank with a granularity of 64MB.  DRB regs are
+	 * cumulative; the last one will contain the total memory
+	 * contained in all ranks.
+	 */
+	for (i = 0; i < IE31200_DIMMS_PER_CHANNEL; i++) {
+		for (j = 0; j < IE31200_CHANNELS; j++) {
+			struct dimm_info *dimm;
+			unsigned long nr_pages;
+
+			nr_pages = IE31200_PAGES(dimm_info[j][i].size, skl);
+			if (nr_pages == 0)
+				continue;
+
+			if (dimm_info[j][i].dual_rank) {
+				nr_pages = nr_pages / 2;
+				dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
+						     mci->n_layers, (i * 2) + 1,
+						     j, 0);
+				dimm->nr_pages = nr_pages;
+				edac_dbg(0, "set nr pages: 0x%lx\n", nr_pages);
+				dimm->grain = 8; /* just a guess */
+				if (skl)
+					dimm->mtype = MEM_DDR4;
+				else
+					dimm->mtype = MEM_DDR3;
+				dimm->dtype = DEV_UNKNOWN;
+				dimm->edac_mode = EDAC_UNKNOWN;
+			}
+			dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
+					     mci->n_layers, i * 2, j, 0);
+			dimm->nr_pages = nr_pages;
+			edac_dbg(0, "set nr pages: 0x%lx\n", nr_pages);
+			dimm->grain = 8; /* same guess */
+			if (skl)
+				dimm->mtype = MEM_DDR4;
+			else
+				dimm->mtype = MEM_DDR3;
+			dimm->dtype = DEV_UNKNOWN;
+			dimm->edac_mode = EDAC_UNKNOWN;
+		}
+	}
+
+	ie31200_clear_error_info(mci);
+
+	if (edac_mc_add_mc(mci)) {
+		edac_dbg(3, "MC: failed edac_mc_add_mc()\n");
+		ret = -ENODEV;
+		goto fail_unmap;
+	}
+
+	/* get this far and it's successful */
+	edac_dbg(3, "MC: success\n");
+	return 0;
+
+fail_unmap:
+	iounmap(window);
+
+fail_free:
+	edac_mc_free(mci);
+
+	return ret;
+}
+
+static int ie31200_init_one(struct pci_dev *pdev,
+			    const struct pci_device_id *ent)
+{
+	int rc;
+
+	edac_dbg(0, "MC:\n");
+	if (pci_enable_device(pdev) < 0)
+		return -EIO;
+	rc = ie31200_probe1(pdev, ent->driver_data);
+	if (rc == 0 && !mci_pdev)
+		mci_pdev = pci_dev_get(pdev);
+
+	return rc;
+}
+
+static void ie31200_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+	struct ie31200_priv *priv;
+
+	edac_dbg(0, "\n");
+	pci_dev_put(mci_pdev);
+	mci_pdev = NULL;
+	mci = edac_mc_del_mc(&pdev->dev);
+	if (!mci)
+		return;
+	priv = mci->pvt_info;
+	iounmap(priv->window);
+	edac_mc_free(mci);
+}
+
+static const struct pci_device_id ie31200_pci_tbl[] = {
+	{
+		PCI_VEND_DEV(INTEL, IE31200_HB_1), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		IE31200},
+	{
+		PCI_VEND_DEV(INTEL, IE31200_HB_2), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		IE31200},
+	{
+		PCI_VEND_DEV(INTEL, IE31200_HB_3), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		IE31200},
+	{
+		PCI_VEND_DEV(INTEL, IE31200_HB_4), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		IE31200},
+	{
+		PCI_VEND_DEV(INTEL, IE31200_HB_5), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		IE31200},
+	{
+		PCI_VEND_DEV(INTEL, IE31200_HB_6), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		IE31200},
+	{
+		PCI_VEND_DEV(INTEL, IE31200_HB_7), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		IE31200},
+	{
+		PCI_VEND_DEV(INTEL, IE31200_HB_8), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		IE31200},
+	{
+		PCI_VEND_DEV(INTEL, IE31200_HB_9), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		IE31200},
+	{
+		0,
+	}            /* 0 terminated list. */
+};
+MODULE_DEVICE_TABLE(pci, ie31200_pci_tbl);
+
+static struct pci_driver ie31200_driver = {
+	.name = EDAC_MOD_STR,
+	.probe = ie31200_init_one,
+	.remove = ie31200_remove_one,
+	.id_table = ie31200_pci_tbl,
+};
+
+static int __init ie31200_init(void)
+{
+	int pci_rc, i;
+
+	edac_dbg(3, "MC:\n");
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
+
+	pci_rc = pci_register_driver(&ie31200_driver);
+	if (pci_rc < 0)
+		goto fail0;
+
+	if (!mci_pdev) {
+		ie31200_registered = 0;
+		for (i = 0; ie31200_pci_tbl[i].vendor != 0; i++) {
+			mci_pdev = pci_get_device(ie31200_pci_tbl[i].vendor,
+						  ie31200_pci_tbl[i].device,
+						  NULL);
+			if (mci_pdev)
+				break;
+		}
+		if (!mci_pdev) {
+			edac_dbg(0, "ie31200 pci_get_device fail\n");
+			pci_rc = -ENODEV;
+			goto fail1;
+		}
+		pci_rc = ie31200_init_one(mci_pdev, &ie31200_pci_tbl[i]);
+		if (pci_rc < 0) {
+			edac_dbg(0, "ie31200 init fail\n");
+			pci_rc = -ENODEV;
+			goto fail1;
+		}
+	}
+	return 0;
+
+fail1:
+	pci_unregister_driver(&ie31200_driver);
+fail0:
+	pci_dev_put(mci_pdev);
+
+	return pci_rc;
+}
+
+static void __exit ie31200_exit(void)
+{
+	edac_dbg(3, "MC:\n");
+	pci_unregister_driver(&ie31200_driver);
+	if (!ie31200_registered)
+		ie31200_remove_one(mci_pdev);
+}
+
+module_init(ie31200_init);
+module_exit(ie31200_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jason Baron <jbaron@akamai.com>");
+MODULE_DESCRIPTION("MC support for Intel Processor E31200 memory hub controllers");
diff --git a/drivers/edac/layerscape_edac.c b/drivers/edac/layerscape_edac.c
new file mode 100644
index 000000000..94cac7686
--- /dev/null
+++ b/drivers/edac/layerscape_edac.c
@@ -0,0 +1,73 @@
+/*
+ * Freescale Memory Controller kernel module
+ *
+ * Author: York Sun <york.sun@nxp.com>
+ *
+ * Copyright 2016 NXP Semiconductor
+ *
+ * Derived from mpc85xx_edac.c
+ * Author: Dave Jiang <djiang@mvista.com>
+ *
+ * 2006-2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "edac_module.h"
+#include "fsl_ddr_edac.h"
+
+static const struct of_device_id fsl_ddr_mc_err_of_match[] = {
+	{ .compatible = "fsl,qoriq-memory-controller", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, fsl_ddr_mc_err_of_match);
+
+static struct platform_driver fsl_ddr_mc_err_driver = {
+	.probe = fsl_mc_err_probe,
+	.remove = fsl_mc_err_remove,
+	.driver = {
+		.name = "fsl_ddr_mc_err",
+		.of_match_table = fsl_ddr_mc_err_of_match,
+	},
+};
+
+static int __init fsl_ddr_mc_init(void)
+{
+	int res;
+
+	/* make sure error reporting method is sane */
+	switch (edac_op_state) {
+	case EDAC_OPSTATE_POLL:
+	case EDAC_OPSTATE_INT:
+		break;
+	default:
+		edac_op_state = EDAC_OPSTATE_INT;
+		break;
+	}
+
+	res = platform_driver_register(&fsl_ddr_mc_err_driver);
+	if (res) {
+		pr_err("MC fails to register\n");
+		return res;
+	}
+
+	return 0;
+}
+
+module_init(fsl_ddr_mc_init);
+
+static void __exit fsl_ddr_mc_exit(void)
+{
+	platform_driver_unregister(&fsl_ddr_mc_err_driver);
+}
+
+module_exit(fsl_ddr_mc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("NXP Semiconductor");
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state,
+		 "EDAC Error Reporting state: 0=Poll, 2=Interrupt");
diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c
new file mode 100644
index 000000000..2ab4d61ee
--- /dev/null
+++ b/drivers/edac/mce_amd.c
@@ -0,0 +1,1152 @@
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <asm/cpu.h>
+
+#include "mce_amd.h"
+
+static struct amd_decoder_ops *fam_ops;
+
+static u8 xec_mask	 = 0xf;
+
+static bool report_gart_errors;
+static void (*decode_dram_ecc)(int node_id, struct mce *m);
+
+void amd_report_gart_errors(bool v)
+{
+	report_gart_errors = v;
+}
+EXPORT_SYMBOL_GPL(amd_report_gart_errors);
+
+void amd_register_ecc_decoder(void (*f)(int, struct mce *))
+{
+	decode_dram_ecc = f;
+}
+EXPORT_SYMBOL_GPL(amd_register_ecc_decoder);
+
+void amd_unregister_ecc_decoder(void (*f)(int, struct mce *))
+{
+	if (decode_dram_ecc) {
+		WARN_ON(decode_dram_ecc != f);
+
+		decode_dram_ecc = NULL;
+	}
+}
+EXPORT_SYMBOL_GPL(amd_unregister_ecc_decoder);
+
+/*
+ * string representation for the different MCA reported error types, see F3x48
+ * or MSR0000_0411.
+ */
+
+/* transaction type */
+static const char * const tt_msgs[] = { "INSN", "DATA", "GEN", "RESV" };
+
+/* cache level */
+static const char * const ll_msgs[] = { "RESV", "L1", "L2", "L3/GEN" };
+
+/* memory transaction type */
+static const char * const rrrr_msgs[] = {
+       "GEN", "RD", "WR", "DRD", "DWR", "IRD", "PRF", "EV", "SNP"
+};
+
+/* participating processor */
+const char * const pp_msgs[] = { "SRC", "RES", "OBS", "GEN" };
+EXPORT_SYMBOL_GPL(pp_msgs);
+
+/* request timeout */
+static const char * const to_msgs[] = { "no timeout", "timed out" };
+
+/* memory or i/o */
+static const char * const ii_msgs[] = { "MEM", "RESV", "IO", "GEN" };
+
+/* internal error type */
+static const char * const uu_msgs[] = { "RESV", "RESV", "HWA", "RESV" };
+
+static const char * const f15h_mc1_mce_desc[] = {
+	"UC during a demand linefill from L2",
+	"Parity error during data load from IC",
+	"Parity error for IC valid bit",
+	"Main tag parity error",
+	"Parity error in prediction queue",
+	"PFB data/address parity error",
+	"Parity error in the branch status reg",
+	"PFB promotion address error",
+	"Tag error during probe/victimization",
+	"Parity error for IC probe tag valid bit",
+	"PFB non-cacheable bit parity error",
+	"PFB valid bit parity error",			/* xec = 0xd */
+	"Microcode Patch Buffer",			/* xec = 010 */
+	"uop queue",
+	"insn buffer",
+	"predecode buffer",
+	"fetch address FIFO",
+	"dispatch uop queue"
+};
+
+static const char * const f15h_mc2_mce_desc[] = {
+	"Fill ECC error on data fills",			/* xec = 0x4 */
+	"Fill parity error on insn fills",
+	"Prefetcher request FIFO parity error",
+	"PRQ address parity error",
+	"PRQ data parity error",
+	"WCC Tag ECC error",
+	"WCC Data ECC error",
+	"WCB Data parity error",
+	"VB Data ECC or parity error",
+	"L2 Tag ECC error",				/* xec = 0x10 */
+	"Hard L2 Tag ECC error",
+	"Multiple hits on L2 tag",
+	"XAB parity error",
+	"PRB address parity error"
+};
+
+static const char * const mc4_mce_desc[] = {
+	"DRAM ECC error detected on the NB",
+	"CRC error detected on HT link",
+	"Link-defined sync error packets detected on HT link",
+	"HT Master abort",
+	"HT Target abort",
+	"Invalid GART PTE entry during GART table walk",
+	"Unsupported atomic RMW received from an IO link",
+	"Watchdog timeout due to lack of progress",
+	"DRAM ECC error detected on the NB",
+	"SVM DMA Exclusion Vector error",
+	"HT data error detected on link",
+	"Protocol error (link, L3, probe filter)",
+	"NB internal arrays parity error",
+	"DRAM addr/ctl signals parity error",
+	"IO link transmission error",
+	"L3 data cache ECC error",			/* xec = 0x1c */
+	"L3 cache tag error",
+	"L3 LRU parity bits error",
+	"ECC Error in the Probe Filter directory"
+};
+
+static const char * const mc5_mce_desc[] = {
+	"CPU Watchdog timer expire",
+	"Wakeup array dest tag",
+	"AG payload array",
+	"EX payload array",
+	"IDRF array",
+	"Retire dispatch queue",
+	"Mapper checkpoint array",
+	"Physical register file EX0 port",
+	"Physical register file EX1 port",
+	"Physical register file AG0 port",
+	"Physical register file AG1 port",
+	"Flag register file",
+	"DE error occurred",
+	"Retire status queue"
+};
+
+static const char * const mc6_mce_desc[] = {
+	"Hardware Assertion",
+	"Free List",
+	"Physical Register File",
+	"Retire Queue",
+	"Scheduler table",
+	"Status Register File",
+};
+
+/* Scalable MCA error strings */
+static const char * const smca_ls_mce_desc[] = {
+	"Load queue parity",
+	"Store queue parity",
+	"Miss address buffer payload parity",
+	"L1 TLB parity",
+	"Reserved",
+	"DC tag error type 6",
+	"DC tag error type 1",
+	"Internal error type 1",
+	"Internal error type 2",
+	"Sys Read data error thread 0",
+	"Sys read data error thread 1",
+	"DC tag error type 2",
+	"DC data error type 1 (poison consumption)",
+	"DC data error type 2",
+	"DC data error type 3",
+	"DC tag error type 4",
+	"L2 TLB parity",
+	"PDC parity error",
+	"DC tag error type 3",
+	"DC tag error type 5",
+	"L2 fill data error",
+};
+
+static const char * const smca_if_mce_desc[] = {
+	"microtag probe port parity error",
+	"IC microtag or full tag multi-hit error",
+	"IC full tag parity",
+	"IC data array parity",
+	"Decoupling queue phys addr parity error",
+	"L0 ITLB parity error",
+	"L1 ITLB parity error",
+	"L2 ITLB parity error",
+	"BPQ snoop parity on Thread 0",
+	"BPQ snoop parity on Thread 1",
+	"L1 BTB multi-match error",
+	"L2 BTB multi-match error",
+	"L2 Cache Response Poison error",
+	"System Read Data error",
+};
+
+static const char * const smca_l2_mce_desc[] = {
+	"L2M tag multi-way-hit error",
+	"L2M tag ECC error",
+	"L2M data ECC error",
+	"HW assert",
+};
+
+static const char * const smca_de_mce_desc[] = {
+	"uop cache tag parity error",
+	"uop cache data parity error",
+	"Insn buffer parity error",
+	"uop queue parity error",
+	"Insn dispatch queue parity error",
+	"Fetch address FIFO parity",
+	"Patch RAM data parity",
+	"Patch RAM sequencer parity",
+	"uop buffer parity"
+};
+
+static const char * const smca_ex_mce_desc[] = {
+	"Watchdog timeout error",
+	"Phy register file parity",
+	"Flag register file parity",
+	"Immediate displacement register file parity",
+	"Address generator payload parity",
+	"EX payload parity",
+	"Checkpoint queue parity",
+	"Retire dispatch queue parity",
+	"Retire status queue parity error",
+	"Scheduling queue parity error",
+	"Branch buffer queue parity error",
+};
+
+static const char * const smca_fp_mce_desc[] = {
+	"Physical register file parity",
+	"Freelist parity error",
+	"Schedule queue parity",
+	"NSQ parity error",
+	"Retire queue parity",
+	"Status register file parity",
+	"Hardware assertion",
+};
+
+static const char * const smca_l3_mce_desc[] = {
+	"Shadow tag macro ECC error",
+	"Shadow tag macro multi-way-hit error",
+	"L3M tag ECC error",
+	"L3M tag multi-way-hit error",
+	"L3M data ECC error",
+	"XI parity, L3 fill done channel error",
+	"L3 victim queue parity",
+	"L3 HW assert",
+};
+
+static const char * const smca_cs_mce_desc[] = {
+	"Illegal request from transport layer",
+	"Address violation",
+	"Security violation",
+	"Illegal response from transport layer",
+	"Unexpected response",
+	"Parity error on incoming request or probe response data",
+	"Parity error on incoming read response data",
+	"Atomic request parity",
+	"ECC error on probe filter access",
+};
+
+static const char * const smca_pie_mce_desc[] = {
+	"HW assert",
+	"Internal PIE register security violation",
+	"Error on GMI link",
+	"Poison data written to internal PIE register",
+};
+
+static const char * const smca_umc_mce_desc[] = {
+	"DRAM ECC error",
+	"Data poison error on DRAM",
+	"SDP parity error",
+	"Advanced peripheral bus error",
+	"Command/address parity error",
+	"Write data CRC error",
+};
+
+static const char * const smca_pb_mce_desc[] = {
+	"Parameter Block RAM ECC error",
+};
+
+static const char * const smca_psp_mce_desc[] = {
+	"PSP RAM ECC or parity error",
+};
+
+static const char * const smca_smu_mce_desc[] = {
+	"SMU RAM ECC or parity error",
+};
+
+struct smca_mce_desc {
+	const char * const *descs;
+	unsigned int num_descs;
+};
+
+static struct smca_mce_desc smca_mce_descs[] = {
+	[SMCA_LS]	= { smca_ls_mce_desc,	ARRAY_SIZE(smca_ls_mce_desc)	},
+	[SMCA_IF]	= { smca_if_mce_desc,	ARRAY_SIZE(smca_if_mce_desc)	},
+	[SMCA_L2_CACHE]	= { smca_l2_mce_desc,	ARRAY_SIZE(smca_l2_mce_desc)	},
+	[SMCA_DE]	= { smca_de_mce_desc,	ARRAY_SIZE(smca_de_mce_desc)	},
+	[SMCA_EX]	= { smca_ex_mce_desc,	ARRAY_SIZE(smca_ex_mce_desc)	},
+	[SMCA_FP]	= { smca_fp_mce_desc,	ARRAY_SIZE(smca_fp_mce_desc)	},
+	[SMCA_L3_CACHE]	= { smca_l3_mce_desc,	ARRAY_SIZE(smca_l3_mce_desc)	},
+	[SMCA_CS]	= { smca_cs_mce_desc,	ARRAY_SIZE(smca_cs_mce_desc)	},
+	[SMCA_PIE]	= { smca_pie_mce_desc,	ARRAY_SIZE(smca_pie_mce_desc)	},
+	[SMCA_UMC]	= { smca_umc_mce_desc,	ARRAY_SIZE(smca_umc_mce_desc)	},
+	[SMCA_PB]	= { smca_pb_mce_desc,	ARRAY_SIZE(smca_pb_mce_desc)	},
+	[SMCA_PSP]	= { smca_psp_mce_desc,	ARRAY_SIZE(smca_psp_mce_desc)	},
+	[SMCA_SMU]	= { smca_smu_mce_desc,	ARRAY_SIZE(smca_smu_mce_desc)	},
+};
+
+static bool f12h_mc0_mce(u16 ec, u8 xec)
+{
+	bool ret = false;
+
+	if (MEM_ERROR(ec)) {
+		u8 ll = LL(ec);
+		ret = true;
+
+		if (ll == LL_L2)
+			pr_cont("during L1 linefill from L2.\n");
+		else if (ll == LL_L1)
+			pr_cont("Data/Tag %s error.\n", R4_MSG(ec));
+		else
+			ret = false;
+	}
+	return ret;
+}
+
+static bool f10h_mc0_mce(u16 ec, u8 xec)
+{
+	if (R4(ec) == R4_GEN && LL(ec) == LL_L1) {
+		pr_cont("during data scrub.\n");
+		return true;
+	}
+	return f12h_mc0_mce(ec, xec);
+}
+
+static bool k8_mc0_mce(u16 ec, u8 xec)
+{
+	if (BUS_ERROR(ec)) {
+		pr_cont("during system linefill.\n");
+		return true;
+	}
+
+	return f10h_mc0_mce(ec, xec);
+}
+
+static bool cat_mc0_mce(u16 ec, u8 xec)
+{
+	u8 r4	 = R4(ec);
+	bool ret = true;
+
+	if (MEM_ERROR(ec)) {
+
+		if (TT(ec) != TT_DATA || LL(ec) != LL_L1)
+			return false;
+
+		switch (r4) {
+		case R4_DRD:
+		case R4_DWR:
+			pr_cont("Data/Tag parity error due to %s.\n",
+				(r4 == R4_DRD ? "load/hw prf" : "store"));
+			break;
+		case R4_EVICT:
+			pr_cont("Copyback parity error on a tag miss.\n");
+			break;
+		case R4_SNOOP:
+			pr_cont("Tag parity error during snoop.\n");
+			break;
+		default:
+			ret = false;
+		}
+	} else if (BUS_ERROR(ec)) {
+
+		if ((II(ec) != II_MEM && II(ec) != II_IO) || LL(ec) != LL_LG)
+			return false;
+
+		pr_cont("System read data error on a ");
+
+		switch (r4) {
+		case R4_RD:
+			pr_cont("TLB reload.\n");
+			break;
+		case R4_DWR:
+			pr_cont("store.\n");
+			break;
+		case R4_DRD:
+			pr_cont("load.\n");
+			break;
+		default:
+			ret = false;
+		}
+	} else {
+		ret = false;
+	}
+
+	return ret;
+}
+
+static bool f15h_mc0_mce(u16 ec, u8 xec)
+{
+	bool ret = true;
+
+	if (MEM_ERROR(ec)) {
+
+		switch (xec) {
+		case 0x0:
+			pr_cont("Data Array access error.\n");
+			break;
+
+		case 0x1:
+			pr_cont("UC error during a linefill from L2/NB.\n");
+			break;
+
+		case 0x2:
+		case 0x11:
+			pr_cont("STQ access error.\n");
+			break;
+
+		case 0x3:
+			pr_cont("SCB access error.\n");
+			break;
+
+		case 0x10:
+			pr_cont("Tag error.\n");
+			break;
+
+		case 0x12:
+			pr_cont("LDQ access error.\n");
+			break;
+
+		default:
+			ret = false;
+		}
+	} else if (BUS_ERROR(ec)) {
+
+		if (!xec)
+			pr_cont("System Read Data Error.\n");
+		else
+			pr_cont(" Internal error condition type %d.\n", xec);
+	} else if (INT_ERROR(ec)) {
+		if (xec <= 0x1f)
+			pr_cont("Hardware Assert.\n");
+		else
+			ret = false;
+
+	} else
+		ret = false;
+
+	return ret;
+}
+
+static void decode_mc0_mce(struct mce *m)
+{
+	u16 ec = EC(m->status);
+	u8 xec = XEC(m->status, xec_mask);
+
+	pr_emerg(HW_ERR "MC0 Error: ");
+
+	/* TLB error signatures are the same across families */
+	if (TLB_ERROR(ec)) {
+		if (TT(ec) == TT_DATA) {
+			pr_cont("%s TLB %s.\n", LL_MSG(ec),
+				((xec == 2) ? "locked miss"
+					    : (xec ? "multimatch" : "parity")));
+			return;
+		}
+	} else if (fam_ops->mc0_mce(ec, xec))
+		;
+	else
+		pr_emerg(HW_ERR "Corrupted MC0 MCE info?\n");
+}
+
+static bool k8_mc1_mce(u16 ec, u8 xec)
+{
+	u8 ll	 = LL(ec);
+	bool ret = true;
+
+	if (!MEM_ERROR(ec))
+		return false;
+
+	if (ll == 0x2)
+		pr_cont("during a linefill from L2.\n");
+	else if (ll == 0x1) {
+		switch (R4(ec)) {
+		case R4_IRD:
+			pr_cont("Parity error during data load.\n");
+			break;
+
+		case R4_EVICT:
+			pr_cont("Copyback Parity/Victim error.\n");
+			break;
+
+		case R4_SNOOP:
+			pr_cont("Tag Snoop error.\n");
+			break;
+
+		default:
+			ret = false;
+			break;
+		}
+	} else
+		ret = false;
+
+	return ret;
+}
+
+static bool cat_mc1_mce(u16 ec, u8 xec)
+{
+	u8 r4    = R4(ec);
+	bool ret = true;
+
+	if (!MEM_ERROR(ec))
+		return false;
+
+	if (TT(ec) != TT_INSTR)
+		return false;
+
+	if (r4 == R4_IRD)
+		pr_cont("Data/tag array parity error for a tag hit.\n");
+	else if (r4 == R4_SNOOP)
+		pr_cont("Tag error during snoop/victimization.\n");
+	else if (xec == 0x0)
+		pr_cont("Tag parity error from victim castout.\n");
+	else if (xec == 0x2)
+		pr_cont("Microcode patch RAM parity error.\n");
+	else
+		ret = false;
+
+	return ret;
+}
+
+static bool f15h_mc1_mce(u16 ec, u8 xec)
+{
+	bool ret = true;
+
+	if (!MEM_ERROR(ec))
+		return false;
+
+	switch (xec) {
+	case 0x0 ... 0xa:
+		pr_cont("%s.\n", f15h_mc1_mce_desc[xec]);
+		break;
+
+	case 0xd:
+		pr_cont("%s.\n", f15h_mc1_mce_desc[xec-2]);
+		break;
+
+	case 0x10:
+		pr_cont("%s.\n", f15h_mc1_mce_desc[xec-4]);
+		break;
+
+	case 0x11 ... 0x15:
+		pr_cont("Decoder %s parity error.\n", f15h_mc1_mce_desc[xec-4]);
+		break;
+
+	default:
+		ret = false;
+	}
+	return ret;
+}
+
+static void decode_mc1_mce(struct mce *m)
+{
+	u16 ec = EC(m->status);
+	u8 xec = XEC(m->status, xec_mask);
+
+	pr_emerg(HW_ERR "MC1 Error: ");
+
+	if (TLB_ERROR(ec))
+		pr_cont("%s TLB %s.\n", LL_MSG(ec),
+			(xec ? "multimatch" : "parity error"));
+	else if (BUS_ERROR(ec)) {
+		bool k8 = (boot_cpu_data.x86 == 0xf && (m->status & BIT_64(58)));
+
+		pr_cont("during %s.\n", (k8 ? "system linefill" : "NB data read"));
+	} else if (INT_ERROR(ec)) {
+		if (xec <= 0x3f)
+			pr_cont("Hardware Assert.\n");
+		else
+			goto wrong_mc1_mce;
+	} else if (fam_ops->mc1_mce(ec, xec))
+		;
+	else
+		goto wrong_mc1_mce;
+
+	return;
+
+wrong_mc1_mce:
+	pr_emerg(HW_ERR "Corrupted MC1 MCE info?\n");
+}
+
+static bool k8_mc2_mce(u16 ec, u8 xec)
+{
+	bool ret = true;
+
+	if (xec == 0x1)
+		pr_cont(" in the write data buffers.\n");
+	else if (xec == 0x3)
+		pr_cont(" in the victim data buffers.\n");
+	else if (xec == 0x2 && MEM_ERROR(ec))
+		pr_cont(": %s error in the L2 cache tags.\n", R4_MSG(ec));
+	else if (xec == 0x0) {
+		if (TLB_ERROR(ec))
+			pr_cont("%s error in a Page Descriptor Cache or Guest TLB.\n",
+				TT_MSG(ec));
+		else if (BUS_ERROR(ec))
+			pr_cont(": %s/ECC error in data read from NB: %s.\n",
+				R4_MSG(ec), PP_MSG(ec));
+		else if (MEM_ERROR(ec)) {
+			u8 r4 = R4(ec);
+
+			if (r4 >= 0x7)
+				pr_cont(": %s error during data copyback.\n",
+					R4_MSG(ec));
+			else if (r4 <= 0x1)
+				pr_cont(": %s parity/ECC error during data "
+					"access from L2.\n", R4_MSG(ec));
+			else
+				ret = false;
+		} else
+			ret = false;
+	} else
+		ret = false;
+
+	return ret;
+}
+
+static bool f15h_mc2_mce(u16 ec, u8 xec)
+{
+	bool ret = true;
+
+	if (TLB_ERROR(ec)) {
+		if (xec == 0x0)
+			pr_cont("Data parity TLB read error.\n");
+		else if (xec == 0x1)
+			pr_cont("Poison data provided for TLB fill.\n");
+		else
+			ret = false;
+	} else if (BUS_ERROR(ec)) {
+		if (xec > 2)
+			ret = false;
+
+		pr_cont("Error during attempted NB data read.\n");
+	} else if (MEM_ERROR(ec)) {
+		switch (xec) {
+		case 0x4 ... 0xc:
+			pr_cont("%s.\n", f15h_mc2_mce_desc[xec - 0x4]);
+			break;
+
+		case 0x10 ... 0x14:
+			pr_cont("%s.\n", f15h_mc2_mce_desc[xec - 0x7]);
+			break;
+
+		default:
+			ret = false;
+		}
+	} else if (INT_ERROR(ec)) {
+		if (xec <= 0x3f)
+			pr_cont("Hardware Assert.\n");
+		else
+			ret = false;
+	}
+
+	return ret;
+}
+
+static bool f16h_mc2_mce(u16 ec, u8 xec)
+{
+	u8 r4 = R4(ec);
+
+	if (!MEM_ERROR(ec))
+		return false;
+
+	switch (xec) {
+	case 0x04 ... 0x05:
+		pr_cont("%cBUFF parity error.\n", (r4 == R4_RD) ? 'I' : 'O');
+		break;
+
+	case 0x09 ... 0x0b:
+	case 0x0d ... 0x0f:
+		pr_cont("ECC error in L2 tag (%s).\n",
+			((r4 == R4_GEN)   ? "BankReq" :
+			((r4 == R4_SNOOP) ? "Prb"     : "Fill")));
+		break;
+
+	case 0x10 ... 0x19:
+	case 0x1b:
+		pr_cont("ECC error in L2 data array (%s).\n",
+			(((r4 == R4_RD) && !(xec & 0x3)) ? "Hit"  :
+			((r4 == R4_GEN)   ? "Attr" :
+			((r4 == R4_EVICT) ? "Vict" : "Fill"))));
+		break;
+
+	case 0x1c ... 0x1d:
+	case 0x1f:
+		pr_cont("Parity error in L2 attribute bits (%s).\n",
+			((r4 == R4_RD)  ? "Hit"  :
+			((r4 == R4_GEN) ? "Attr" : "Fill")));
+		break;
+
+	default:
+		return false;
+	}
+
+	return true;
+}
+
+static void decode_mc2_mce(struct mce *m)
+{
+	u16 ec = EC(m->status);
+	u8 xec = XEC(m->status, xec_mask);
+
+	pr_emerg(HW_ERR "MC2 Error: ");
+
+	if (!fam_ops->mc2_mce(ec, xec))
+		pr_cont(HW_ERR "Corrupted MC2 MCE info?\n");
+}
+
+static void decode_mc3_mce(struct mce *m)
+{
+	u16 ec = EC(m->status);
+	u8 xec = XEC(m->status, xec_mask);
+
+	if (boot_cpu_data.x86 >= 0x14) {
+		pr_emerg("You shouldn't be seeing MC3 MCE on this cpu family,"
+			 " please report on LKML.\n");
+		return;
+	}
+
+	pr_emerg(HW_ERR "MC3 Error");
+
+	if (xec == 0x0) {
+		u8 r4 = R4(ec);
+
+		if (!BUS_ERROR(ec) || (r4 != R4_DRD && r4 != R4_DWR))
+			goto wrong_mc3_mce;
+
+		pr_cont(" during %s.\n", R4_MSG(ec));
+	} else
+		goto wrong_mc3_mce;
+
+	return;
+
+ wrong_mc3_mce:
+	pr_emerg(HW_ERR "Corrupted MC3 MCE info?\n");
+}
+
+static void decode_mc4_mce(struct mce *m)
+{
+	unsigned int fam = x86_family(m->cpuid);
+	int node_id = amd_get_nb_id(m->extcpu);
+	u16 ec = EC(m->status);
+	u8 xec = XEC(m->status, 0x1f);
+	u8 offset = 0;
+
+	pr_emerg(HW_ERR "MC4 Error (node %d): ", node_id);
+
+	switch (xec) {
+	case 0x0 ... 0xe:
+
+		/* special handling for DRAM ECCs */
+		if (xec == 0x0 || xec == 0x8) {
+			/* no ECCs on F11h */
+			if (fam == 0x11)
+				goto wrong_mc4_mce;
+
+			pr_cont("%s.\n", mc4_mce_desc[xec]);
+
+			if (decode_dram_ecc)
+				decode_dram_ecc(node_id, m);
+			return;
+		}
+		break;
+
+	case 0xf:
+		if (TLB_ERROR(ec))
+			pr_cont("GART Table Walk data error.\n");
+		else if (BUS_ERROR(ec))
+			pr_cont("DMA Exclusion Vector Table Walk error.\n");
+		else
+			goto wrong_mc4_mce;
+		return;
+
+	case 0x19:
+		if (fam == 0x15 || fam == 0x16)
+			pr_cont("Compute Unit Data Error.\n");
+		else
+			goto wrong_mc4_mce;
+		return;
+
+	case 0x1c ... 0x1f:
+		offset = 13;
+		break;
+
+	default:
+		goto wrong_mc4_mce;
+	}
+
+	pr_cont("%s.\n", mc4_mce_desc[xec - offset]);
+	return;
+
+ wrong_mc4_mce:
+	pr_emerg(HW_ERR "Corrupted MC4 MCE info?\n");
+}
+
+static void decode_mc5_mce(struct mce *m)
+{
+	unsigned int fam = x86_family(m->cpuid);
+	u16 ec = EC(m->status);
+	u8 xec = XEC(m->status, xec_mask);
+
+	if (fam == 0xf || fam == 0x11)
+		goto wrong_mc5_mce;
+
+	pr_emerg(HW_ERR "MC5 Error: ");
+
+	if (INT_ERROR(ec)) {
+		if (xec <= 0x1f) {
+			pr_cont("Hardware Assert.\n");
+			return;
+		} else
+			goto wrong_mc5_mce;
+	}
+
+	if (xec == 0x0 || xec == 0xc)
+		pr_cont("%s.\n", mc5_mce_desc[xec]);
+	else if (xec <= 0xd)
+		pr_cont("%s parity error.\n", mc5_mce_desc[xec]);
+	else
+		goto wrong_mc5_mce;
+
+	return;
+
+ wrong_mc5_mce:
+	pr_emerg(HW_ERR "Corrupted MC5 MCE info?\n");
+}
+
+static void decode_mc6_mce(struct mce *m)
+{
+	u8 xec = XEC(m->status, xec_mask);
+
+	pr_emerg(HW_ERR "MC6 Error: ");
+
+	if (xec > 0x5)
+		goto wrong_mc6_mce;
+
+	pr_cont("%s parity error.\n", mc6_mce_desc[xec]);
+	return;
+
+ wrong_mc6_mce:
+	pr_emerg(HW_ERR "Corrupted MC6 MCE info?\n");
+}
+
+/* Decode errors according to Scalable MCA specification */
+static void decode_smca_error(struct mce *m)
+{
+	struct smca_hwid *hwid;
+	enum smca_bank_types bank_type;
+	const char *ip_name;
+	u8 xec = XEC(m->status, xec_mask);
+
+	if (m->bank >= ARRAY_SIZE(smca_banks))
+		return;
+
+	hwid = smca_banks[m->bank].hwid;
+	if (!hwid)
+		return;
+
+	bank_type = hwid->bank_type;
+
+	if (bank_type == SMCA_RESERVED) {
+		pr_emerg(HW_ERR "Bank %d is reserved.\n", m->bank);
+		return;
+	}
+
+	ip_name = smca_get_long_name(bank_type);
+
+	pr_emerg(HW_ERR "%s Extended Error Code: %d\n", ip_name, xec);
+
+	/* Only print the decode of valid error codes */
+	if (xec < smca_mce_descs[bank_type].num_descs &&
+			(hwid->xec_bitmap & BIT_ULL(xec))) {
+		pr_emerg(HW_ERR "%s Error: ", ip_name);
+		pr_cont("%s.\n", smca_mce_descs[bank_type].descs[xec]);
+	}
+
+	if (bank_type == SMCA_UMC && xec == 0 && decode_dram_ecc)
+		decode_dram_ecc(cpu_to_node(m->extcpu), m);
+}
+
+static inline void amd_decode_err_code(u16 ec)
+{
+	if (INT_ERROR(ec)) {
+		pr_emerg(HW_ERR "internal: %s\n", UU_MSG(ec));
+		return;
+	}
+
+	pr_emerg(HW_ERR "cache level: %s", LL_MSG(ec));
+
+	if (BUS_ERROR(ec))
+		pr_cont(", mem/io: %s", II_MSG(ec));
+	else
+		pr_cont(", tx: %s", TT_MSG(ec));
+
+	if (MEM_ERROR(ec) || BUS_ERROR(ec)) {
+		pr_cont(", mem-tx: %s", R4_MSG(ec));
+
+		if (BUS_ERROR(ec))
+			pr_cont(", part-proc: %s (%s)", PP_MSG(ec), TO_MSG(ec));
+	}
+
+	pr_cont("\n");
+}
+
+/*
+ * Filter out unwanted MCE signatures here.
+ */
+static bool amd_filter_mce(struct mce *m)
+{
+	/*
+	 * NB GART TLB error reporting is disabled by default.
+	 */
+	if (m->bank == 4 && XEC(m->status, 0x1f) == 0x5 && !report_gart_errors)
+		return true;
+
+	return false;
+}
+
+static const char *decode_error_status(struct mce *m)
+{
+	if (m->status & MCI_STATUS_UC) {
+		if (m->status & MCI_STATUS_PCC)
+			return "System Fatal error.";
+		if (m->mcgstatus & MCG_STATUS_RIPV)
+			return "Uncorrected, software restartable error.";
+		return "Uncorrected, software containable error.";
+	}
+
+	if (m->status & MCI_STATUS_DEFERRED)
+		return "Deferred error, no action required.";
+
+	return "Corrected error, no action required.";
+}
+
+static int
+amd_decode_mce(struct notifier_block *nb, unsigned long val, void *data)
+{
+	struct mce *m = (struct mce *)data;
+	unsigned int fam = x86_family(m->cpuid);
+	int ecc;
+
+	if (amd_filter_mce(m))
+		return NOTIFY_STOP;
+
+	pr_emerg(HW_ERR "%s\n", decode_error_status(m));
+
+	pr_emerg(HW_ERR "CPU:%d (%x:%x:%x) MC%d_STATUS[%s|%s|%s|%s|%s",
+		m->extcpu,
+		fam, x86_model(m->cpuid), x86_stepping(m->cpuid),
+		m->bank,
+		((m->status & MCI_STATUS_OVER)	? "Over"  : "-"),
+		((m->status & MCI_STATUS_UC)	? "UE"	  :
+		 (m->status & MCI_STATUS_DEFERRED) ? "-"  : "CE"),
+		((m->status & MCI_STATUS_MISCV)	? "MiscV" : "-"),
+		((m->status & MCI_STATUS_PCC)	? "PCC"	  : "-"),
+		((m->status & MCI_STATUS_ADDRV)	? "AddrV" : "-"));
+
+	if (fam >= 0x15) {
+		pr_cont("|%s", (m->status & MCI_STATUS_DEFERRED ? "Deferred" : "-"));
+
+		/* F15h, bank4, bit 43 is part of McaStatSubCache. */
+		if (fam != 0x15 || m->bank != 4)
+			pr_cont("|%s", (m->status & MCI_STATUS_POISON ? "Poison" : "-"));
+	}
+
+	if (boot_cpu_has(X86_FEATURE_SMCA)) {
+		u32 low, high;
+		u32 addr = MSR_AMD64_SMCA_MCx_CONFIG(m->bank);
+
+		pr_cont("|%s", ((m->status & MCI_STATUS_SYNDV) ? "SyndV" : "-"));
+
+		if (!rdmsr_safe(addr, &low, &high) &&
+		    (low & MCI_CONFIG_MCAX))
+			pr_cont("|%s", ((m->status & MCI_STATUS_TCC) ? "TCC" : "-"));
+	}
+
+	/* do the two bits[14:13] together */
+	ecc = (m->status >> 45) & 0x3;
+	if (ecc)
+		pr_cont("|%sECC", ((ecc == 2) ? "C" : "U"));
+
+	pr_cont("]: 0x%016llx\n", m->status);
+
+	if (m->status & MCI_STATUS_ADDRV)
+		pr_emerg(HW_ERR "Error Addr: 0x%016llx\n", m->addr);
+
+	if (boot_cpu_has(X86_FEATURE_SMCA)) {
+		pr_emerg(HW_ERR "IPID: 0x%016llx", m->ipid);
+
+		if (m->status & MCI_STATUS_SYNDV)
+			pr_cont(", Syndrome: 0x%016llx", m->synd);
+
+		pr_cont("\n");
+
+		decode_smca_error(m);
+		goto err_code;
+	}
+
+	if (m->tsc)
+		pr_emerg(HW_ERR "TSC: %llu\n", m->tsc);
+
+	if (!fam_ops)
+		goto err_code;
+
+	switch (m->bank) {
+	case 0:
+		decode_mc0_mce(m);
+		break;
+
+	case 1:
+		decode_mc1_mce(m);
+		break;
+
+	case 2:
+		decode_mc2_mce(m);
+		break;
+
+	case 3:
+		decode_mc3_mce(m);
+		break;
+
+	case 4:
+		decode_mc4_mce(m);
+		break;
+
+	case 5:
+		decode_mc5_mce(m);
+		break;
+
+	case 6:
+		decode_mc6_mce(m);
+		break;
+
+	default:
+		break;
+	}
+
+ err_code:
+	amd_decode_err_code(m->status & 0xffff);
+
+	return NOTIFY_STOP;
+}
+
+static struct notifier_block amd_mce_dec_nb = {
+	.notifier_call	= amd_decode_mce,
+	.priority	= MCE_PRIO_EDAC,
+};
+
+static int __init mce_amd_init(void)
+{
+	struct cpuinfo_x86 *c = &boot_cpu_data;
+
+	if (c->x86_vendor != X86_VENDOR_AMD)
+		return -ENODEV;
+
+	fam_ops = kzalloc(sizeof(struct amd_decoder_ops), GFP_KERNEL);
+	if (!fam_ops)
+		return -ENOMEM;
+
+	switch (c->x86) {
+	case 0xf:
+		fam_ops->mc0_mce = k8_mc0_mce;
+		fam_ops->mc1_mce = k8_mc1_mce;
+		fam_ops->mc2_mce = k8_mc2_mce;
+		break;
+
+	case 0x10:
+		fam_ops->mc0_mce = f10h_mc0_mce;
+		fam_ops->mc1_mce = k8_mc1_mce;
+		fam_ops->mc2_mce = k8_mc2_mce;
+		break;
+
+	case 0x11:
+		fam_ops->mc0_mce = k8_mc0_mce;
+		fam_ops->mc1_mce = k8_mc1_mce;
+		fam_ops->mc2_mce = k8_mc2_mce;
+		break;
+
+	case 0x12:
+		fam_ops->mc0_mce = f12h_mc0_mce;
+		fam_ops->mc1_mce = k8_mc1_mce;
+		fam_ops->mc2_mce = k8_mc2_mce;
+		break;
+
+	case 0x14:
+		fam_ops->mc0_mce = cat_mc0_mce;
+		fam_ops->mc1_mce = cat_mc1_mce;
+		fam_ops->mc2_mce = k8_mc2_mce;
+		break;
+
+	case 0x15:
+		xec_mask = c->x86_model == 0x60 ? 0x3f : 0x1f;
+
+		fam_ops->mc0_mce = f15h_mc0_mce;
+		fam_ops->mc1_mce = f15h_mc1_mce;
+		fam_ops->mc2_mce = f15h_mc2_mce;
+		break;
+
+	case 0x16:
+		xec_mask = 0x1f;
+		fam_ops->mc0_mce = cat_mc0_mce;
+		fam_ops->mc1_mce = cat_mc1_mce;
+		fam_ops->mc2_mce = f16h_mc2_mce;
+		break;
+
+	case 0x17:
+		xec_mask = 0x3f;
+		if (!boot_cpu_has(X86_FEATURE_SMCA)) {
+			printk(KERN_WARNING "Decoding supported only on Scalable MCA processors.\n");
+			goto err_out;
+		}
+		break;
+
+	default:
+		printk(KERN_WARNING "Huh? What family is it: 0x%x?!\n", c->x86);
+		goto err_out;
+	}
+
+	pr_info("MCE: In-kernel MCE decoding enabled.\n");
+
+	mce_register_decode_chain(&amd_mce_dec_nb);
+
+	return 0;
+
+err_out:
+	kfree(fam_ops);
+	fam_ops = NULL;
+	return -EINVAL;
+}
+early_initcall(mce_amd_init);
+
+#ifdef MODULE
+static void __exit mce_amd_exit(void)
+{
+	mce_unregister_decode_chain(&amd_mce_dec_nb);
+	kfree(fam_ops);
+}
+
+MODULE_DESCRIPTION("AMD MCE decoder");
+MODULE_ALIAS("edac-mce-amd");
+MODULE_LICENSE("GPL");
+module_exit(mce_amd_exit);
+#endif
diff --git a/drivers/edac/mce_amd.h b/drivers/edac/mce_amd.h
new file mode 100644
index 000000000..4e9c5e596
--- /dev/null
+++ b/drivers/edac/mce_amd.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _EDAC_MCE_AMD_H
+#define _EDAC_MCE_AMD_H
+
+#include <linux/notifier.h>
+
+#include <asm/mce.h>
+
+#define EC(x)				((x) & 0xffff)
+#define XEC(x, mask)			(((x) >> 16) & mask)
+
+#define LOW_SYNDROME(x)			(((x) >> 15) & 0xff)
+#define HIGH_SYNDROME(x)		(((x) >> 24) & 0xff)
+
+#define TLB_ERROR(x)			(((x) & 0xFFF0) == 0x0010)
+#define MEM_ERROR(x)			(((x) & 0xFF00) == 0x0100)
+#define BUS_ERROR(x)			(((x) & 0xF800) == 0x0800)
+#define INT_ERROR(x)			(((x) & 0xF4FF) == 0x0400)
+
+#define TT(x)				(((x) >> 2) & 0x3)
+#define TT_MSG(x)			tt_msgs[TT(x)]
+#define II(x)				(((x) >> 2) & 0x3)
+#define II_MSG(x)			ii_msgs[II(x)]
+#define LL(x)				((x) & 0x3)
+#define LL_MSG(x)			ll_msgs[LL(x)]
+#define TO(x)				(((x) >> 8) & 0x1)
+#define TO_MSG(x)			to_msgs[TO(x)]
+#define PP(x)				(((x) >> 9) & 0x3)
+#define PP_MSG(x)			pp_msgs[PP(x)]
+#define UU(x)				(((x) >> 8) & 0x3)
+#define UU_MSG(x)			uu_msgs[UU(x)]
+
+#define R4(x)				(((x) >> 4) & 0xf)
+#define R4_MSG(x)			((R4(x) < 9) ?  rrrr_msgs[R4(x)] : "Wrong R4!")
+
+extern const char * const pp_msgs[];
+
+enum tt_ids {
+	TT_INSTR = 0,
+	TT_DATA,
+	TT_GEN,
+	TT_RESV,
+};
+
+enum ll_ids {
+	LL_RESV = 0,
+	LL_L1,
+	LL_L2,
+	LL_LG,
+};
+
+enum ii_ids {
+	II_MEM = 0,
+	II_RESV,
+	II_IO,
+	II_GEN,
+};
+
+enum rrrr_ids {
+	R4_GEN	= 0,
+	R4_RD,
+	R4_WR,
+	R4_DRD,
+	R4_DWR,
+	R4_IRD,
+	R4_PREF,
+	R4_EVICT,
+	R4_SNOOP,
+};
+
+/*
+ * per-family decoder ops
+ */
+struct amd_decoder_ops {
+	bool (*mc0_mce)(u16, u8);
+	bool (*mc1_mce)(u16, u8);
+	bool (*mc2_mce)(u16, u8);
+};
+
+void amd_report_gart_errors(bool);
+void amd_register_ecc_decoder(void (*f)(int, struct mce *));
+void amd_unregister_ecc_decoder(void (*f)(int, struct mce *));
+
+#endif /* _EDAC_MCE_AMD_H */
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
new file mode 100644
index 000000000..67f7bc3fe
--- /dev/null
+++ b/drivers/edac/mpc85xx_edac.c
@@ -0,0 +1,727 @@
+/*
+ * Freescale MPC85xx Memory Controller kernel module
+ *
+ * Parts Copyrighted (c) 2013 by Freescale Semiconductor, Inc.
+ *
+ * Author: Dave Jiang <djiang@mvista.com>
+ *
+ * 2006-2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ctype.h>
+#include <linux/io.h>
+#include <linux/mod_devicetable.h>
+#include <linux/edac.h>
+#include <linux/smp.h>
+#include <linux/gfp.h>
+#include <linux/fsl/edac.h>
+
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+#include "edac_module.h"
+#include "mpc85xx_edac.h"
+#include "fsl_ddr_edac.h"
+
+static int edac_dev_idx;
+#ifdef CONFIG_PCI
+static int edac_pci_idx;
+#endif
+
+/*
+ * PCI Err defines
+ */
+#ifdef CONFIG_PCI
+static u32 orig_pci_err_cap_dr;
+static u32 orig_pci_err_en;
+#endif
+
+static u32 orig_l2_err_disable;
+
+/**************************** PCI Err device ***************************/
+#ifdef CONFIG_PCI
+
+static void mpc85xx_pci_check(struct edac_pci_ctl_info *pci)
+{
+	struct mpc85xx_pci_pdata *pdata = pci->pvt_info;
+	u32 err_detect;
+
+	err_detect = in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR);
+
+	/* master aborts can happen during PCI config cycles */
+	if (!(err_detect & ~(PCI_EDE_MULTI_ERR | PCI_EDE_MST_ABRT))) {
+		out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR, err_detect);
+		return;
+	}
+
+	pr_err("PCI error(s) detected\n");
+	pr_err("PCI/X ERR_DR register: %#08x\n", err_detect);
+
+	pr_err("PCI/X ERR_ATTRIB register: %#08x\n",
+	       in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ATTRIB));
+	pr_err("PCI/X ERR_ADDR register: %#08x\n",
+	       in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR));
+	pr_err("PCI/X ERR_EXT_ADDR register: %#08x\n",
+	       in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EXT_ADDR));
+	pr_err("PCI/X ERR_DL register: %#08x\n",
+	       in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DL));
+	pr_err("PCI/X ERR_DH register: %#08x\n",
+	       in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DH));
+
+	/* clear error bits */
+	out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR, err_detect);
+
+	if (err_detect & PCI_EDE_PERR_MASK)
+		edac_pci_handle_pe(pci, pci->ctl_name);
+
+	if ((err_detect & ~PCI_EDE_MULTI_ERR) & ~PCI_EDE_PERR_MASK)
+		edac_pci_handle_npe(pci, pci->ctl_name);
+}
+
+static void mpc85xx_pcie_check(struct edac_pci_ctl_info *pci)
+{
+	struct mpc85xx_pci_pdata *pdata = pci->pvt_info;
+	u32 err_detect, err_cap_stat;
+
+	err_detect = in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR);
+	err_cap_stat = in_be32(pdata->pci_vbase + MPC85XX_PCI_GAS_TIMR);
+
+	pr_err("PCIe error(s) detected\n");
+	pr_err("PCIe ERR_DR register: 0x%08x\n", err_detect);
+	pr_err("PCIe ERR_CAP_STAT register: 0x%08x\n", err_cap_stat);
+	pr_err("PCIe ERR_CAP_R0 register: 0x%08x\n",
+			in_be32(pdata->pci_vbase + MPC85XX_PCIE_ERR_CAP_R0));
+	pr_err("PCIe ERR_CAP_R1 register: 0x%08x\n",
+			in_be32(pdata->pci_vbase + MPC85XX_PCIE_ERR_CAP_R1));
+	pr_err("PCIe ERR_CAP_R2 register: 0x%08x\n",
+			in_be32(pdata->pci_vbase + MPC85XX_PCIE_ERR_CAP_R2));
+	pr_err("PCIe ERR_CAP_R3 register: 0x%08x\n",
+			in_be32(pdata->pci_vbase + MPC85XX_PCIE_ERR_CAP_R3));
+
+	/* clear error bits */
+	out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR, err_detect);
+
+	/* reset error capture */
+	out_be32(pdata->pci_vbase + MPC85XX_PCI_GAS_TIMR, err_cap_stat | 0x1);
+}
+
+static int mpc85xx_pcie_find_capability(struct device_node *np)
+{
+	struct pci_controller *hose;
+
+	if (!np)
+		return -EINVAL;
+
+	hose = pci_find_hose_for_OF_device(np);
+
+	return early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP);
+}
+
+static irqreturn_t mpc85xx_pci_isr(int irq, void *dev_id)
+{
+	struct edac_pci_ctl_info *pci = dev_id;
+	struct mpc85xx_pci_pdata *pdata = pci->pvt_info;
+	u32 err_detect;
+
+	err_detect = in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR);
+
+	if (!err_detect)
+		return IRQ_NONE;
+
+	if (pdata->is_pcie)
+		mpc85xx_pcie_check(pci);
+	else
+		mpc85xx_pci_check(pci);
+
+	return IRQ_HANDLED;
+}
+
+static int mpc85xx_pci_err_probe(struct platform_device *op)
+{
+	struct edac_pci_ctl_info *pci;
+	struct mpc85xx_pci_pdata *pdata;
+	struct mpc85xx_edac_pci_plat_data *plat_data;
+	struct device_node *of_node;
+	struct resource r;
+	int res = 0;
+
+	if (!devres_open_group(&op->dev, mpc85xx_pci_err_probe, GFP_KERNEL))
+		return -ENOMEM;
+
+	pci = edac_pci_alloc_ctl_info(sizeof(*pdata), "mpc85xx_pci_err");
+	if (!pci)
+		return -ENOMEM;
+
+	/* make sure error reporting method is sane */
+	switch (edac_op_state) {
+	case EDAC_OPSTATE_POLL:
+	case EDAC_OPSTATE_INT:
+		break;
+	default:
+		edac_op_state = EDAC_OPSTATE_INT;
+		break;
+	}
+
+	pdata = pci->pvt_info;
+	pdata->name = "mpc85xx_pci_err";
+
+	plat_data = op->dev.platform_data;
+	if (!plat_data) {
+		dev_err(&op->dev, "no platform data");
+		res = -ENXIO;
+		goto err;
+	}
+	of_node = plat_data->of_node;
+
+	if (mpc85xx_pcie_find_capability(of_node) > 0)
+		pdata->is_pcie = true;
+
+	dev_set_drvdata(&op->dev, pci);
+	pci->dev = &op->dev;
+	pci->mod_name = EDAC_MOD_STR;
+	pci->ctl_name = pdata->name;
+	pci->dev_name = dev_name(&op->dev);
+
+	if (edac_op_state == EDAC_OPSTATE_POLL) {
+		if (pdata->is_pcie)
+			pci->edac_check = mpc85xx_pcie_check;
+		else
+			pci->edac_check = mpc85xx_pci_check;
+	}
+
+	pdata->edac_idx = edac_pci_idx++;
+
+	res = of_address_to_resource(of_node, 0, &r);
+	if (res) {
+		pr_err("%s: Unable to get resource for PCI err regs\n", __func__);
+		goto err;
+	}
+
+	/* we only need the error registers */
+	r.start += 0xe00;
+
+	if (!devm_request_mem_region(&op->dev, r.start, resource_size(&r),
+					pdata->name)) {
+		pr_err("%s: Error while requesting mem region\n", __func__);
+		res = -EBUSY;
+		goto err;
+	}
+
+	pdata->pci_vbase = devm_ioremap(&op->dev, r.start, resource_size(&r));
+	if (!pdata->pci_vbase) {
+		pr_err("%s: Unable to setup PCI err regs\n", __func__);
+		res = -ENOMEM;
+		goto err;
+	}
+
+	if (pdata->is_pcie) {
+		orig_pci_err_cap_dr =
+		    in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR);
+		out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR, ~0);
+		orig_pci_err_en =
+		    in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN);
+		out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, 0);
+	} else {
+		orig_pci_err_cap_dr =
+		    in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_CAP_DR);
+
+		/* PCI master abort is expected during config cycles */
+		out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_CAP_DR, 0x40);
+
+		orig_pci_err_en =
+		    in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN);
+
+		/* disable master abort reporting */
+		out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, ~0x40);
+	}
+
+	/* clear error bits */
+	out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR, ~0);
+
+	/* reset error capture */
+	out_be32(pdata->pci_vbase + MPC85XX_PCI_GAS_TIMR, 0x1);
+
+	if (edac_pci_add_device(pci, pdata->edac_idx) > 0) {
+		edac_dbg(3, "failed edac_pci_add_device()\n");
+		goto err;
+	}
+
+	if (edac_op_state == EDAC_OPSTATE_INT) {
+		pdata->irq = irq_of_parse_and_map(of_node, 0);
+		res = devm_request_irq(&op->dev, pdata->irq,
+				       mpc85xx_pci_isr,
+				       IRQF_SHARED,
+				       "[EDAC] PCI err", pci);
+		if (res < 0) {
+			pr_err("%s: Unable to request irq %d for MPC85xx PCI err\n",
+				__func__, pdata->irq);
+			irq_dispose_mapping(pdata->irq);
+			res = -ENODEV;
+			goto err2;
+		}
+
+		pr_info(EDAC_MOD_STR " acquired irq %d for PCI Err\n",
+		       pdata->irq);
+	}
+
+	if (pdata->is_pcie) {
+		/*
+		 * Enable all PCIe error interrupt & error detect except invalid
+		 * PEX_CONFIG_ADDR/PEX_CONFIG_DATA access interrupt generation
+		 * enable bit and invalid PEX_CONFIG_ADDR/PEX_CONFIG_DATA access
+		 * detection enable bit. Because PCIe bus code to initialize and
+		 * configure these PCIe devices on booting will use some invalid
+		 * PEX_CONFIG_ADDR/PEX_CONFIG_DATA, edac driver prints the much
+		 * notice information. So disable this detect to fix ugly print.
+		 */
+		out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, ~0
+			 & ~PEX_ERR_ICCAIE_EN_BIT);
+		out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR, 0
+			 | PEX_ERR_ICCAD_DISR_BIT);
+	}
+
+	devres_remove_group(&op->dev, mpc85xx_pci_err_probe);
+	edac_dbg(3, "success\n");
+	pr_info(EDAC_MOD_STR " PCI err registered\n");
+
+	return 0;
+
+err2:
+	edac_pci_del_device(&op->dev);
+err:
+	edac_pci_free_ctl_info(pci);
+	devres_release_group(&op->dev, mpc85xx_pci_err_probe);
+	return res;
+}
+
+static int mpc85xx_pci_err_remove(struct platform_device *op)
+{
+	struct edac_pci_ctl_info *pci = dev_get_drvdata(&op->dev);
+	struct mpc85xx_pci_pdata *pdata = pci->pvt_info;
+
+	edac_dbg(0, "\n");
+
+	out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR, orig_pci_err_cap_dr);
+	out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, orig_pci_err_en);
+
+	edac_pci_del_device(&op->dev);
+	edac_pci_free_ctl_info(pci);
+
+	return 0;
+}
+
+static const struct platform_device_id mpc85xx_pci_err_match[] = {
+	{
+		.name = "mpc85xx-pci-edac"
+	},
+	{}
+};
+
+static struct platform_driver mpc85xx_pci_err_driver = {
+	.probe = mpc85xx_pci_err_probe,
+	.remove = mpc85xx_pci_err_remove,
+	.id_table = mpc85xx_pci_err_match,
+	.driver = {
+		.name = "mpc85xx_pci_err",
+		.suppress_bind_attrs = true,
+	},
+};
+#endif				/* CONFIG_PCI */
+
+/**************************** L2 Err device ***************************/
+
+/************************ L2 SYSFS parts ***********************************/
+
+static ssize_t mpc85xx_l2_inject_data_hi_show(struct edac_device_ctl_info
+					      *edac_dev, char *data)
+{
+	struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info;
+	return sprintf(data, "0x%08x",
+		       in_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJHI));
+}
+
+static ssize_t mpc85xx_l2_inject_data_lo_show(struct edac_device_ctl_info
+					      *edac_dev, char *data)
+{
+	struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info;
+	return sprintf(data, "0x%08x",
+		       in_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJLO));
+}
+
+static ssize_t mpc85xx_l2_inject_ctrl_show(struct edac_device_ctl_info
+					   *edac_dev, char *data)
+{
+	struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info;
+	return sprintf(data, "0x%08x",
+		       in_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJCTL));
+}
+
+static ssize_t mpc85xx_l2_inject_data_hi_store(struct edac_device_ctl_info
+					       *edac_dev, const char *data,
+					       size_t count)
+{
+	struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info;
+	if (isdigit(*data)) {
+		out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJHI,
+			 simple_strtoul(data, NULL, 0));
+		return count;
+	}
+	return 0;
+}
+
+static ssize_t mpc85xx_l2_inject_data_lo_store(struct edac_device_ctl_info
+					       *edac_dev, const char *data,
+					       size_t count)
+{
+	struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info;
+	if (isdigit(*data)) {
+		out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJLO,
+			 simple_strtoul(data, NULL, 0));
+		return count;
+	}
+	return 0;
+}
+
+static ssize_t mpc85xx_l2_inject_ctrl_store(struct edac_device_ctl_info
+					    *edac_dev, const char *data,
+					    size_t count)
+{
+	struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info;
+	if (isdigit(*data)) {
+		out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJCTL,
+			 simple_strtoul(data, NULL, 0));
+		return count;
+	}
+	return 0;
+}
+
+static struct edac_dev_sysfs_attribute mpc85xx_l2_sysfs_attributes[] = {
+	{
+	 .attr = {
+		  .name = "inject_data_hi",
+		  .mode = (S_IRUGO | S_IWUSR)
+		  },
+	 .show = mpc85xx_l2_inject_data_hi_show,
+	 .store = mpc85xx_l2_inject_data_hi_store},
+	{
+	 .attr = {
+		  .name = "inject_data_lo",
+		  .mode = (S_IRUGO | S_IWUSR)
+		  },
+	 .show = mpc85xx_l2_inject_data_lo_show,
+	 .store = mpc85xx_l2_inject_data_lo_store},
+	{
+	 .attr = {
+		  .name = "inject_ctrl",
+		  .mode = (S_IRUGO | S_IWUSR)
+		  },
+	 .show = mpc85xx_l2_inject_ctrl_show,
+	 .store = mpc85xx_l2_inject_ctrl_store},
+
+	/* End of list */
+	{
+	 .attr = {.name = NULL}
+	 }
+};
+
+static void mpc85xx_set_l2_sysfs_attributes(struct edac_device_ctl_info
+					    *edac_dev)
+{
+	edac_dev->sysfs_attributes = mpc85xx_l2_sysfs_attributes;
+}
+
+/***************************** L2 ops ***********************************/
+
+static void mpc85xx_l2_check(struct edac_device_ctl_info *edac_dev)
+{
+	struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info;
+	u32 err_detect;
+
+	err_detect = in_be32(pdata->l2_vbase + MPC85XX_L2_ERRDET);
+
+	if (!(err_detect & L2_EDE_MASK))
+		return;
+
+	pr_err("ECC Error in CPU L2 cache\n");
+	pr_err("L2 Error Detect Register: 0x%08x\n", err_detect);
+	pr_err("L2 Error Capture Data High Register: 0x%08x\n",
+	       in_be32(pdata->l2_vbase + MPC85XX_L2_CAPTDATAHI));
+	pr_err("L2 Error Capture Data Lo Register: 0x%08x\n",
+	       in_be32(pdata->l2_vbase + MPC85XX_L2_CAPTDATALO));
+	pr_err("L2 Error Syndrome Register: 0x%08x\n",
+	       in_be32(pdata->l2_vbase + MPC85XX_L2_CAPTECC));
+	pr_err("L2 Error Attributes Capture Register: 0x%08x\n",
+	       in_be32(pdata->l2_vbase + MPC85XX_L2_ERRATTR));
+	pr_err("L2 Error Address Capture Register: 0x%08x\n",
+	       in_be32(pdata->l2_vbase + MPC85XX_L2_ERRADDR));
+
+	/* clear error detect register */
+	out_be32(pdata->l2_vbase + MPC85XX_L2_ERRDET, err_detect);
+
+	if (err_detect & L2_EDE_CE_MASK)
+		edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name);
+
+	if (err_detect & L2_EDE_UE_MASK)
+		edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name);
+}
+
+static irqreturn_t mpc85xx_l2_isr(int irq, void *dev_id)
+{
+	struct edac_device_ctl_info *edac_dev = dev_id;
+	struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info;
+	u32 err_detect;
+
+	err_detect = in_be32(pdata->l2_vbase + MPC85XX_L2_ERRDET);
+
+	if (!(err_detect & L2_EDE_MASK))
+		return IRQ_NONE;
+
+	mpc85xx_l2_check(edac_dev);
+
+	return IRQ_HANDLED;
+}
+
+static int mpc85xx_l2_err_probe(struct platform_device *op)
+{
+	struct edac_device_ctl_info *edac_dev;
+	struct mpc85xx_l2_pdata *pdata;
+	struct resource r;
+	int res;
+
+	if (!devres_open_group(&op->dev, mpc85xx_l2_err_probe, GFP_KERNEL))
+		return -ENOMEM;
+
+	edac_dev = edac_device_alloc_ctl_info(sizeof(*pdata),
+					      "cpu", 1, "L", 1, 2, NULL, 0,
+					      edac_dev_idx);
+	if (!edac_dev) {
+		devres_release_group(&op->dev, mpc85xx_l2_err_probe);
+		return -ENOMEM;
+	}
+
+	pdata = edac_dev->pvt_info;
+	pdata->name = "mpc85xx_l2_err";
+	edac_dev->dev = &op->dev;
+	dev_set_drvdata(edac_dev->dev, edac_dev);
+	edac_dev->ctl_name = pdata->name;
+	edac_dev->dev_name = pdata->name;
+
+	res = of_address_to_resource(op->dev.of_node, 0, &r);
+	if (res) {
+		pr_err("%s: Unable to get resource for L2 err regs\n", __func__);
+		goto err;
+	}
+
+	/* we only need the error registers */
+	r.start += 0xe00;
+
+	if (!devm_request_mem_region(&op->dev, r.start, resource_size(&r),
+				     pdata->name)) {
+		pr_err("%s: Error while requesting mem region\n", __func__);
+		res = -EBUSY;
+		goto err;
+	}
+
+	pdata->l2_vbase = devm_ioremap(&op->dev, r.start, resource_size(&r));
+	if (!pdata->l2_vbase) {
+		pr_err("%s: Unable to setup L2 err regs\n", __func__);
+		res = -ENOMEM;
+		goto err;
+	}
+
+	out_be32(pdata->l2_vbase + MPC85XX_L2_ERRDET, ~0);
+
+	orig_l2_err_disable = in_be32(pdata->l2_vbase + MPC85XX_L2_ERRDIS);
+
+	/* clear the err_dis */
+	out_be32(pdata->l2_vbase + MPC85XX_L2_ERRDIS, 0);
+
+	edac_dev->mod_name = EDAC_MOD_STR;
+
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		edac_dev->edac_check = mpc85xx_l2_check;
+
+	mpc85xx_set_l2_sysfs_attributes(edac_dev);
+
+	pdata->edac_idx = edac_dev_idx++;
+
+	if (edac_device_add_device(edac_dev) > 0) {
+		edac_dbg(3, "failed edac_device_add_device()\n");
+		goto err;
+	}
+
+	if (edac_op_state == EDAC_OPSTATE_INT) {
+		pdata->irq = irq_of_parse_and_map(op->dev.of_node, 0);
+		res = devm_request_irq(&op->dev, pdata->irq,
+				       mpc85xx_l2_isr, IRQF_SHARED,
+				       "[EDAC] L2 err", edac_dev);
+		if (res < 0) {
+			pr_err("%s: Unable to request irq %d for MPC85xx L2 err\n",
+				__func__, pdata->irq);
+			irq_dispose_mapping(pdata->irq);
+			res = -ENODEV;
+			goto err2;
+		}
+
+		pr_info(EDAC_MOD_STR " acquired irq %d for L2 Err\n", pdata->irq);
+
+		edac_dev->op_state = OP_RUNNING_INTERRUPT;
+
+		out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINTEN, L2_EIE_MASK);
+	}
+
+	devres_remove_group(&op->dev, mpc85xx_l2_err_probe);
+
+	edac_dbg(3, "success\n");
+	pr_info(EDAC_MOD_STR " L2 err registered\n");
+
+	return 0;
+
+err2:
+	edac_device_del_device(&op->dev);
+err:
+	devres_release_group(&op->dev, mpc85xx_l2_err_probe);
+	edac_device_free_ctl_info(edac_dev);
+	return res;
+}
+
+static int mpc85xx_l2_err_remove(struct platform_device *op)
+{
+	struct edac_device_ctl_info *edac_dev = dev_get_drvdata(&op->dev);
+	struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info;
+
+	edac_dbg(0, "\n");
+
+	if (edac_op_state == EDAC_OPSTATE_INT) {
+		out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINTEN, 0);
+		irq_dispose_mapping(pdata->irq);
+	}
+
+	out_be32(pdata->l2_vbase + MPC85XX_L2_ERRDIS, orig_l2_err_disable);
+	edac_device_del_device(&op->dev);
+	edac_device_free_ctl_info(edac_dev);
+	return 0;
+}
+
+static const struct of_device_id mpc85xx_l2_err_of_match[] = {
+/* deprecate the fsl,85.. forms in the future, 2.6.30? */
+	{ .compatible = "fsl,8540-l2-cache-controller", },
+	{ .compatible = "fsl,8541-l2-cache-controller", },
+	{ .compatible = "fsl,8544-l2-cache-controller", },
+	{ .compatible = "fsl,8548-l2-cache-controller", },
+	{ .compatible = "fsl,8555-l2-cache-controller", },
+	{ .compatible = "fsl,8568-l2-cache-controller", },
+	{ .compatible = "fsl,mpc8536-l2-cache-controller", },
+	{ .compatible = "fsl,mpc8540-l2-cache-controller", },
+	{ .compatible = "fsl,mpc8541-l2-cache-controller", },
+	{ .compatible = "fsl,mpc8544-l2-cache-controller", },
+	{ .compatible = "fsl,mpc8548-l2-cache-controller", },
+	{ .compatible = "fsl,mpc8555-l2-cache-controller", },
+	{ .compatible = "fsl,mpc8560-l2-cache-controller", },
+	{ .compatible = "fsl,mpc8568-l2-cache-controller", },
+	{ .compatible = "fsl,mpc8569-l2-cache-controller", },
+	{ .compatible = "fsl,mpc8572-l2-cache-controller", },
+	{ .compatible = "fsl,p1020-l2-cache-controller", },
+	{ .compatible = "fsl,p1021-l2-cache-controller", },
+	{ .compatible = "fsl,p2020-l2-cache-controller", },
+	{ .compatible = "fsl,t2080-l2-cache-controller", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mpc85xx_l2_err_of_match);
+
+static struct platform_driver mpc85xx_l2_err_driver = {
+	.probe = mpc85xx_l2_err_probe,
+	.remove = mpc85xx_l2_err_remove,
+	.driver = {
+		.name = "mpc85xx_l2_err",
+		.of_match_table = mpc85xx_l2_err_of_match,
+	},
+};
+
+static const struct of_device_id mpc85xx_mc_err_of_match[] = {
+/* deprecate the fsl,85.. forms in the future, 2.6.30? */
+	{ .compatible = "fsl,8540-memory-controller", },
+	{ .compatible = "fsl,8541-memory-controller", },
+	{ .compatible = "fsl,8544-memory-controller", },
+	{ .compatible = "fsl,8548-memory-controller", },
+	{ .compatible = "fsl,8555-memory-controller", },
+	{ .compatible = "fsl,8568-memory-controller", },
+	{ .compatible = "fsl,mpc8536-memory-controller", },
+	{ .compatible = "fsl,mpc8540-memory-controller", },
+	{ .compatible = "fsl,mpc8541-memory-controller", },
+	{ .compatible = "fsl,mpc8544-memory-controller", },
+	{ .compatible = "fsl,mpc8548-memory-controller", },
+	{ .compatible = "fsl,mpc8555-memory-controller", },
+	{ .compatible = "fsl,mpc8560-memory-controller", },
+	{ .compatible = "fsl,mpc8568-memory-controller", },
+	{ .compatible = "fsl,mpc8569-memory-controller", },
+	{ .compatible = "fsl,mpc8572-memory-controller", },
+	{ .compatible = "fsl,mpc8349-memory-controller", },
+	{ .compatible = "fsl,p1020-memory-controller", },
+	{ .compatible = "fsl,p1021-memory-controller", },
+	{ .compatible = "fsl,p2020-memory-controller", },
+	{ .compatible = "fsl,qoriq-memory-controller", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mpc85xx_mc_err_of_match);
+
+static struct platform_driver mpc85xx_mc_err_driver = {
+	.probe = fsl_mc_err_probe,
+	.remove = fsl_mc_err_remove,
+	.driver = {
+		.name = "mpc85xx_mc_err",
+		.of_match_table = mpc85xx_mc_err_of_match,
+	},
+};
+
+static struct platform_driver * const drivers[] = {
+	&mpc85xx_mc_err_driver,
+	&mpc85xx_l2_err_driver,
+#ifdef CONFIG_PCI
+	&mpc85xx_pci_err_driver,
+#endif
+};
+
+static int __init mpc85xx_mc_init(void)
+{
+	int res = 0;
+	u32 __maybe_unused pvr = 0;
+
+	pr_info("Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software\n");
+
+	/* make sure error reporting method is sane */
+	switch (edac_op_state) {
+	case EDAC_OPSTATE_POLL:
+	case EDAC_OPSTATE_INT:
+		break;
+	default:
+		edac_op_state = EDAC_OPSTATE_INT;
+		break;
+	}
+
+	res = platform_register_drivers(drivers, ARRAY_SIZE(drivers));
+	if (res)
+		pr_warn(EDAC_MOD_STR "drivers fail to register\n");
+
+	return 0;
+}
+
+module_init(mpc85xx_mc_init);
+
+static void __exit mpc85xx_mc_exit(void)
+{
+	platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
+}
+
+module_exit(mpc85xx_mc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Montavista Software, Inc.");
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state,
+		 "EDAC Error Reporting state: 0=Poll, 2=Interrupt");
diff --git a/drivers/edac/mpc85xx_edac.h b/drivers/edac/mpc85xx_edac.h
new file mode 100644
index 000000000..3f6fb16ad
--- /dev/null
+++ b/drivers/edac/mpc85xx_edac.h
@@ -0,0 +1,108 @@
+/*
+ * Freescale MPC85xx Memory Controller kernel module
+ * Author: Dave Jiang <djiang@mvista.com>
+ *
+ * 2006-2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+#ifndef _MPC85XX_EDAC_H_
+#define _MPC85XX_EDAC_H_
+
+#define MPC85XX_REVISION " Ver: 2.0.0"
+#define EDAC_MOD_STR	"MPC85xx_edac"
+
+#define mpc85xx_printk(level, fmt, arg...) \
+	edac_printk(level, "MPC85xx", fmt, ##arg)
+
+/*
+ * L2 Err defines
+ */
+#define MPC85XX_L2_ERRINJHI	0x0000
+#define MPC85XX_L2_ERRINJLO	0x0004
+#define MPC85XX_L2_ERRINJCTL	0x0008
+#define MPC85XX_L2_CAPTDATAHI	0x0020
+#define MPC85XX_L2_CAPTDATALO	0x0024
+#define MPC85XX_L2_CAPTECC	0x0028
+#define MPC85XX_L2_ERRDET	0x0040
+#define MPC85XX_L2_ERRDIS	0x0044
+#define MPC85XX_L2_ERRINTEN	0x0048
+#define MPC85XX_L2_ERRATTR	0x004c
+#define MPC85XX_L2_ERRADDR	0x0050
+#define MPC85XX_L2_ERRCTL	0x0058
+
+/* Error Interrupt Enable */
+#define L2_EIE_L2CFGINTEN	0x1
+#define L2_EIE_SBECCINTEN	0x4
+#define L2_EIE_MBECCINTEN	0x8
+#define L2_EIE_TPARINTEN	0x10
+#define L2_EIE_MASK	(L2_EIE_L2CFGINTEN | L2_EIE_SBECCINTEN | \
+			L2_EIE_MBECCINTEN | L2_EIE_TPARINTEN)
+
+/* Error Detect */
+#define L2_EDE_L2CFGERR		0x1
+#define L2_EDE_SBECCERR		0x4
+#define L2_EDE_MBECCERR		0x8
+#define L2_EDE_TPARERR		0x10
+#define L2_EDE_MULL2ERR		0x80000000
+
+#define L2_EDE_CE_MASK	L2_EDE_SBECCERR
+#define L2_EDE_UE_MASK	(L2_EDE_L2CFGERR | L2_EDE_MBECCERR | \
+			L2_EDE_TPARERR)
+#define L2_EDE_MASK	(L2_EDE_L2CFGERR | L2_EDE_SBECCERR | \
+			L2_EDE_MBECCERR | L2_EDE_TPARERR | L2_EDE_MULL2ERR)
+
+/*
+ * PCI Err defines
+ */
+#define PCI_EDE_TOE			0x00000001
+#define PCI_EDE_SCM			0x00000002
+#define PCI_EDE_IRMSV			0x00000004
+#define PCI_EDE_ORMSV			0x00000008
+#define PCI_EDE_OWMSV			0x00000010
+#define PCI_EDE_TGT_ABRT		0x00000020
+#define PCI_EDE_MST_ABRT		0x00000040
+#define PCI_EDE_TGT_PERR		0x00000080
+#define PCI_EDE_MST_PERR		0x00000100
+#define PCI_EDE_RCVD_SERR		0x00000200
+#define PCI_EDE_ADDR_PERR		0x00000400
+#define PCI_EDE_MULTI_ERR		0x80000000
+
+#define PCI_EDE_PERR_MASK	(PCI_EDE_TGT_PERR | PCI_EDE_MST_PERR | \
+				PCI_EDE_ADDR_PERR)
+
+#define MPC85XX_PCI_ERR_DR		0x0000
+#define MPC85XX_PCI_ERR_CAP_DR		0x0004
+#define MPC85XX_PCI_ERR_EN		0x0008
+#define   PEX_ERR_ICCAIE_EN_BIT		0x00020000
+#define MPC85XX_PCI_ERR_ATTRIB		0x000c
+#define MPC85XX_PCI_ERR_ADDR		0x0010
+#define   PEX_ERR_ICCAD_DISR_BIT	0x00020000
+#define MPC85XX_PCI_ERR_EXT_ADDR	0x0014
+#define MPC85XX_PCI_ERR_DL		0x0018
+#define MPC85XX_PCI_ERR_DH		0x001c
+#define MPC85XX_PCI_GAS_TIMR		0x0020
+#define MPC85XX_PCI_PCIX_TIMR		0x0024
+#define MPC85XX_PCIE_ERR_CAP_R0		0x0028
+#define MPC85XX_PCIE_ERR_CAP_R1		0x002c
+#define MPC85XX_PCIE_ERR_CAP_R2		0x0030
+#define MPC85XX_PCIE_ERR_CAP_R3		0x0034
+
+struct mpc85xx_l2_pdata {
+	char *name;
+	int edac_idx;
+	void __iomem *l2_vbase;
+	int irq;
+};
+
+struct mpc85xx_pci_pdata {
+	char *name;
+	bool is_pcie;
+	int edac_idx;
+	void __iomem *pci_vbase;
+	int irq;
+};
+
+#endif
diff --git a/drivers/edac/mv64x60_edac.c b/drivers/edac/mv64x60_edac.c
new file mode 100644
index 000000000..3c68bb525
--- /dev/null
+++ b/drivers/edac/mv64x60_edac.c
@@ -0,0 +1,883 @@
+/*
+ * Marvell MV64x60 Memory Controller kernel module for PPC platforms
+ *
+ * Author: Dave Jiang <djiang@mvista.com>
+ *
+ * 2006-2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/edac.h>
+#include <linux/gfp.h>
+
+#include "edac_module.h"
+#include "mv64x60_edac.h"
+
+static const char *mv64x60_ctl_name = "MV64x60";
+static int edac_dev_idx;
+static int edac_pci_idx;
+static int edac_mc_idx;
+
+/*********************** PCI err device **********************************/
+#ifdef CONFIG_PCI
+static void mv64x60_pci_check(struct edac_pci_ctl_info *pci)
+{
+	struct mv64x60_pci_pdata *pdata = pci->pvt_info;
+	u32 cause;
+
+	cause = readl(pdata->pci_vbase + MV64X60_PCI_ERROR_CAUSE);
+	if (!cause)
+		return;
+
+	printk(KERN_ERR "Error in PCI %d Interface\n", pdata->pci_hose);
+	printk(KERN_ERR "Cause register: 0x%08x\n", cause);
+	printk(KERN_ERR "Address Low: 0x%08x\n",
+	       readl(pdata->pci_vbase + MV64X60_PCI_ERROR_ADDR_LO));
+	printk(KERN_ERR "Address High: 0x%08x\n",
+	       readl(pdata->pci_vbase + MV64X60_PCI_ERROR_ADDR_HI));
+	printk(KERN_ERR "Attribute: 0x%08x\n",
+	       readl(pdata->pci_vbase + MV64X60_PCI_ERROR_ATTR));
+	printk(KERN_ERR "Command: 0x%08x\n",
+	       readl(pdata->pci_vbase + MV64X60_PCI_ERROR_CMD));
+	writel(~cause, pdata->pci_vbase + MV64X60_PCI_ERROR_CAUSE);
+
+	if (cause & MV64X60_PCI_PE_MASK)
+		edac_pci_handle_pe(pci, pci->ctl_name);
+
+	if (!(cause & MV64X60_PCI_PE_MASK))
+		edac_pci_handle_npe(pci, pci->ctl_name);
+}
+
+static irqreturn_t mv64x60_pci_isr(int irq, void *dev_id)
+{
+	struct edac_pci_ctl_info *pci = dev_id;
+	struct mv64x60_pci_pdata *pdata = pci->pvt_info;
+	u32 val;
+
+	val = readl(pdata->pci_vbase + MV64X60_PCI_ERROR_CAUSE);
+	if (!val)
+		return IRQ_NONE;
+
+	mv64x60_pci_check(pci);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Bit 0 of MV64x60_PCIx_ERR_MASK does not exist on the 64360 and because of
+ * errata FEr-#11 and FEr-##16 for the 64460, it should be 0 on that chip as
+ * well.  IOW, don't set bit 0.
+ */
+
+/* Erratum FEr PCI-#16: clear bit 0 of PCI SERRn Mask reg. */
+static int __init mv64x60_pci_fixup(struct platform_device *pdev)
+{
+	struct resource *r;
+	void __iomem *pci_serr;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!r) {
+		printk(KERN_ERR "%s: Unable to get resource for "
+		       "PCI err regs\n", __func__);
+		return -ENOENT;
+	}
+
+	pci_serr = ioremap(r->start, resource_size(r));
+	if (!pci_serr)
+		return -ENOMEM;
+
+	writel(readl(pci_serr) & ~0x1, pci_serr);
+	iounmap(pci_serr);
+
+	return 0;
+}
+
+static int mv64x60_pci_err_probe(struct platform_device *pdev)
+{
+	struct edac_pci_ctl_info *pci;
+	struct mv64x60_pci_pdata *pdata;
+	struct resource *r;
+	int res = 0;
+
+	if (!devres_open_group(&pdev->dev, mv64x60_pci_err_probe, GFP_KERNEL))
+		return -ENOMEM;
+
+	pci = edac_pci_alloc_ctl_info(sizeof(*pdata), "mv64x60_pci_err");
+	if (!pci)
+		return -ENOMEM;
+
+	pdata = pci->pvt_info;
+
+	pdata->pci_hose = pdev->id;
+	pdata->name = "mv64x60_pci_err";
+	platform_set_drvdata(pdev, pci);
+	pci->dev = &pdev->dev;
+	pci->dev_name = dev_name(&pdev->dev);
+	pci->mod_name = EDAC_MOD_STR;
+	pci->ctl_name = pdata->name;
+
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		pci->edac_check = mv64x60_pci_check;
+
+	pdata->edac_idx = edac_pci_idx++;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		printk(KERN_ERR "%s: Unable to get resource for "
+		       "PCI err regs\n", __func__);
+		res = -ENOENT;
+		goto err;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev,
+				     r->start,
+				     resource_size(r),
+				     pdata->name)) {
+		printk(KERN_ERR "%s: Error while requesting mem region\n",
+		       __func__);
+		res = -EBUSY;
+		goto err;
+	}
+
+	pdata->pci_vbase = devm_ioremap(&pdev->dev,
+					r->start,
+					resource_size(r));
+	if (!pdata->pci_vbase) {
+		printk(KERN_ERR "%s: Unable to setup PCI err regs\n", __func__);
+		res = -ENOMEM;
+		goto err;
+	}
+
+	res = mv64x60_pci_fixup(pdev);
+	if (res < 0) {
+		printk(KERN_ERR "%s: PCI fixup failed\n", __func__);
+		goto err;
+	}
+
+	writel(0, pdata->pci_vbase + MV64X60_PCI_ERROR_CAUSE);
+	writel(0, pdata->pci_vbase + MV64X60_PCI_ERROR_MASK);
+	writel(MV64X60_PCIx_ERR_MASK_VAL,
+		  pdata->pci_vbase + MV64X60_PCI_ERROR_MASK);
+
+	if (edac_pci_add_device(pci, pdata->edac_idx) > 0) {
+		edac_dbg(3, "failed edac_pci_add_device()\n");
+		goto err;
+	}
+
+	if (edac_op_state == EDAC_OPSTATE_INT) {
+		pdata->irq = platform_get_irq(pdev, 0);
+		res = devm_request_irq(&pdev->dev,
+				       pdata->irq,
+				       mv64x60_pci_isr,
+				       0,
+				       "[EDAC] PCI err",
+				       pci);
+		if (res < 0) {
+			printk(KERN_ERR "%s: Unable to request irq %d for "
+			       "MV64x60 PCI ERR\n", __func__, pdata->irq);
+			res = -ENODEV;
+			goto err2;
+		}
+		printk(KERN_INFO EDAC_MOD_STR " acquired irq %d for PCI Err\n",
+		       pdata->irq);
+	}
+
+	devres_remove_group(&pdev->dev, mv64x60_pci_err_probe);
+
+	/* get this far and it's successful */
+	edac_dbg(3, "success\n");
+
+	return 0;
+
+err2:
+	edac_pci_del_device(&pdev->dev);
+err:
+	edac_pci_free_ctl_info(pci);
+	devres_release_group(&pdev->dev, mv64x60_pci_err_probe);
+	return res;
+}
+
+static int mv64x60_pci_err_remove(struct platform_device *pdev)
+{
+	struct edac_pci_ctl_info *pci = platform_get_drvdata(pdev);
+
+	edac_dbg(0, "\n");
+
+	edac_pci_del_device(&pdev->dev);
+
+	edac_pci_free_ctl_info(pci);
+
+	return 0;
+}
+
+static struct platform_driver mv64x60_pci_err_driver = {
+	.probe = mv64x60_pci_err_probe,
+	.remove = mv64x60_pci_err_remove,
+	.driver = {
+		   .name = "mv64x60_pci_err",
+	}
+};
+
+#endif /* CONFIG_PCI */
+
+/*********************** SRAM err device **********************************/
+static void mv64x60_sram_check(struct edac_device_ctl_info *edac_dev)
+{
+	struct mv64x60_sram_pdata *pdata = edac_dev->pvt_info;
+	u32 cause;
+
+	cause = readl(pdata->sram_vbase + MV64X60_SRAM_ERR_CAUSE);
+	if (!cause)
+		return;
+
+	printk(KERN_ERR "Error in internal SRAM\n");
+	printk(KERN_ERR "Cause register: 0x%08x\n", cause);
+	printk(KERN_ERR "Address Low: 0x%08x\n",
+	       readl(pdata->sram_vbase + MV64X60_SRAM_ERR_ADDR_LO));
+	printk(KERN_ERR "Address High: 0x%08x\n",
+	       readl(pdata->sram_vbase + MV64X60_SRAM_ERR_ADDR_HI));
+	printk(KERN_ERR "Data Low: 0x%08x\n",
+	       readl(pdata->sram_vbase + MV64X60_SRAM_ERR_DATA_LO));
+	printk(KERN_ERR "Data High: 0x%08x\n",
+	       readl(pdata->sram_vbase + MV64X60_SRAM_ERR_DATA_HI));
+	printk(KERN_ERR "Parity: 0x%08x\n",
+	       readl(pdata->sram_vbase + MV64X60_SRAM_ERR_PARITY));
+	writel(0, pdata->sram_vbase + MV64X60_SRAM_ERR_CAUSE);
+
+	edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name);
+}
+
+static irqreturn_t mv64x60_sram_isr(int irq, void *dev_id)
+{
+	struct edac_device_ctl_info *edac_dev = dev_id;
+	struct mv64x60_sram_pdata *pdata = edac_dev->pvt_info;
+	u32 cause;
+
+	cause = readl(pdata->sram_vbase + MV64X60_SRAM_ERR_CAUSE);
+	if (!cause)
+		return IRQ_NONE;
+
+	mv64x60_sram_check(edac_dev);
+
+	return IRQ_HANDLED;
+}
+
+static int mv64x60_sram_err_probe(struct platform_device *pdev)
+{
+	struct edac_device_ctl_info *edac_dev;
+	struct mv64x60_sram_pdata *pdata;
+	struct resource *r;
+	int res = 0;
+
+	if (!devres_open_group(&pdev->dev, mv64x60_sram_err_probe, GFP_KERNEL))
+		return -ENOMEM;
+
+	edac_dev = edac_device_alloc_ctl_info(sizeof(*pdata),
+					      "sram", 1, NULL, 0, 0, NULL, 0,
+					      edac_dev_idx);
+	if (!edac_dev) {
+		devres_release_group(&pdev->dev, mv64x60_sram_err_probe);
+		return -ENOMEM;
+	}
+
+	pdata = edac_dev->pvt_info;
+	pdata->name = "mv64x60_sram_err";
+	edac_dev->dev = &pdev->dev;
+	platform_set_drvdata(pdev, edac_dev);
+	edac_dev->dev_name = dev_name(&pdev->dev);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		printk(KERN_ERR "%s: Unable to get resource for "
+		       "SRAM err regs\n", __func__);
+		res = -ENOENT;
+		goto err;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev,
+				     r->start,
+				     resource_size(r),
+				     pdata->name)) {
+		printk(KERN_ERR "%s: Error while request mem region\n",
+		       __func__);
+		res = -EBUSY;
+		goto err;
+	}
+
+	pdata->sram_vbase = devm_ioremap(&pdev->dev,
+					 r->start,
+					 resource_size(r));
+	if (!pdata->sram_vbase) {
+		printk(KERN_ERR "%s: Unable to setup SRAM err regs\n",
+		       __func__);
+		res = -ENOMEM;
+		goto err;
+	}
+
+	/* setup SRAM err registers */
+	writel(0, pdata->sram_vbase + MV64X60_SRAM_ERR_CAUSE);
+
+	edac_dev->mod_name = EDAC_MOD_STR;
+	edac_dev->ctl_name = pdata->name;
+
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		edac_dev->edac_check = mv64x60_sram_check;
+
+	pdata->edac_idx = edac_dev_idx++;
+
+	if (edac_device_add_device(edac_dev) > 0) {
+		edac_dbg(3, "failed edac_device_add_device()\n");
+		goto err;
+	}
+
+	if (edac_op_state == EDAC_OPSTATE_INT) {
+		pdata->irq = platform_get_irq(pdev, 0);
+		res = devm_request_irq(&pdev->dev,
+				       pdata->irq,
+				       mv64x60_sram_isr,
+				       0,
+				       "[EDAC] SRAM err",
+				       edac_dev);
+		if (res < 0) {
+			printk(KERN_ERR
+			       "%s: Unable to request irq %d for "
+			       "MV64x60 SRAM ERR\n", __func__, pdata->irq);
+			res = -ENODEV;
+			goto err2;
+		}
+
+		printk(KERN_INFO EDAC_MOD_STR " acquired irq %d for SRAM Err\n",
+		       pdata->irq);
+	}
+
+	devres_remove_group(&pdev->dev, mv64x60_sram_err_probe);
+
+	/* get this far and it's successful */
+	edac_dbg(3, "success\n");
+
+	return 0;
+
+err2:
+	edac_device_del_device(&pdev->dev);
+err:
+	devres_release_group(&pdev->dev, mv64x60_sram_err_probe);
+	edac_device_free_ctl_info(edac_dev);
+	return res;
+}
+
+static int mv64x60_sram_err_remove(struct platform_device *pdev)
+{
+	struct edac_device_ctl_info *edac_dev = platform_get_drvdata(pdev);
+
+	edac_dbg(0, "\n");
+
+	edac_device_del_device(&pdev->dev);
+	edac_device_free_ctl_info(edac_dev);
+
+	return 0;
+}
+
+static struct platform_driver mv64x60_sram_err_driver = {
+	.probe = mv64x60_sram_err_probe,
+	.remove = mv64x60_sram_err_remove,
+	.driver = {
+		   .name = "mv64x60_sram_err",
+	}
+};
+
+/*********************** CPU err device **********************************/
+static void mv64x60_cpu_check(struct edac_device_ctl_info *edac_dev)
+{
+	struct mv64x60_cpu_pdata *pdata = edac_dev->pvt_info;
+	u32 cause;
+
+	cause = readl(pdata->cpu_vbase[1] + MV64x60_CPU_ERR_CAUSE) &
+	    MV64x60_CPU_CAUSE_MASK;
+	if (!cause)
+		return;
+
+	printk(KERN_ERR "Error on CPU interface\n");
+	printk(KERN_ERR "Cause register: 0x%08x\n", cause);
+	printk(KERN_ERR "Address Low: 0x%08x\n",
+	       readl(pdata->cpu_vbase[0] + MV64x60_CPU_ERR_ADDR_LO));
+	printk(KERN_ERR "Address High: 0x%08x\n",
+	       readl(pdata->cpu_vbase[0] + MV64x60_CPU_ERR_ADDR_HI));
+	printk(KERN_ERR "Data Low: 0x%08x\n",
+	       readl(pdata->cpu_vbase[1] + MV64x60_CPU_ERR_DATA_LO));
+	printk(KERN_ERR "Data High: 0x%08x\n",
+	       readl(pdata->cpu_vbase[1] + MV64x60_CPU_ERR_DATA_HI));
+	printk(KERN_ERR "Parity: 0x%08x\n",
+	       readl(pdata->cpu_vbase[1] + MV64x60_CPU_ERR_PARITY));
+	writel(0, pdata->cpu_vbase[1] + MV64x60_CPU_ERR_CAUSE);
+
+	edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name);
+}
+
+static irqreturn_t mv64x60_cpu_isr(int irq, void *dev_id)
+{
+	struct edac_device_ctl_info *edac_dev = dev_id;
+	struct mv64x60_cpu_pdata *pdata = edac_dev->pvt_info;
+	u32 cause;
+
+	cause = readl(pdata->cpu_vbase[1] + MV64x60_CPU_ERR_CAUSE) &
+	    MV64x60_CPU_CAUSE_MASK;
+	if (!cause)
+		return IRQ_NONE;
+
+	mv64x60_cpu_check(edac_dev);
+
+	return IRQ_HANDLED;
+}
+
+static int mv64x60_cpu_err_probe(struct platform_device *pdev)
+{
+	struct edac_device_ctl_info *edac_dev;
+	struct resource *r;
+	struct mv64x60_cpu_pdata *pdata;
+	int res = 0;
+
+	if (!devres_open_group(&pdev->dev, mv64x60_cpu_err_probe, GFP_KERNEL))
+		return -ENOMEM;
+
+	edac_dev = edac_device_alloc_ctl_info(sizeof(*pdata),
+					      "cpu", 1, NULL, 0, 0, NULL, 0,
+					      edac_dev_idx);
+	if (!edac_dev) {
+		devres_release_group(&pdev->dev, mv64x60_cpu_err_probe);
+		return -ENOMEM;
+	}
+
+	pdata = edac_dev->pvt_info;
+	pdata->name = "mv64x60_cpu_err";
+	edac_dev->dev = &pdev->dev;
+	platform_set_drvdata(pdev, edac_dev);
+	edac_dev->dev_name = dev_name(&pdev->dev);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		printk(KERN_ERR "%s: Unable to get resource for "
+		       "CPU err regs\n", __func__);
+		res = -ENOENT;
+		goto err;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev,
+				     r->start,
+				     resource_size(r),
+				     pdata->name)) {
+		printk(KERN_ERR "%s: Error while requesting mem region\n",
+		       __func__);
+		res = -EBUSY;
+		goto err;
+	}
+
+	pdata->cpu_vbase[0] = devm_ioremap(&pdev->dev,
+					   r->start,
+					   resource_size(r));
+	if (!pdata->cpu_vbase[0]) {
+		printk(KERN_ERR "%s: Unable to setup CPU err regs\n", __func__);
+		res = -ENOMEM;
+		goto err;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!r) {
+		printk(KERN_ERR "%s: Unable to get resource for "
+		       "CPU err regs\n", __func__);
+		res = -ENOENT;
+		goto err;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev,
+				     r->start,
+				     resource_size(r),
+				     pdata->name)) {
+		printk(KERN_ERR "%s: Error while requesting mem region\n",
+		       __func__);
+		res = -EBUSY;
+		goto err;
+	}
+
+	pdata->cpu_vbase[1] = devm_ioremap(&pdev->dev,
+					   r->start,
+					   resource_size(r));
+	if (!pdata->cpu_vbase[1]) {
+		printk(KERN_ERR "%s: Unable to setup CPU err regs\n", __func__);
+		res = -ENOMEM;
+		goto err;
+	}
+
+	/* setup CPU err registers */
+	writel(0, pdata->cpu_vbase[1] + MV64x60_CPU_ERR_CAUSE);
+	writel(0, pdata->cpu_vbase[1] + MV64x60_CPU_ERR_MASK);
+	writel(0x000000ff, pdata->cpu_vbase[1] + MV64x60_CPU_ERR_MASK);
+
+	edac_dev->mod_name = EDAC_MOD_STR;
+	edac_dev->ctl_name = pdata->name;
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		edac_dev->edac_check = mv64x60_cpu_check;
+
+	pdata->edac_idx = edac_dev_idx++;
+
+	if (edac_device_add_device(edac_dev) > 0) {
+		edac_dbg(3, "failed edac_device_add_device()\n");
+		goto err;
+	}
+
+	if (edac_op_state == EDAC_OPSTATE_INT) {
+		pdata->irq = platform_get_irq(pdev, 0);
+		res = devm_request_irq(&pdev->dev,
+				       pdata->irq,
+				       mv64x60_cpu_isr,
+				       0,
+				       "[EDAC] CPU err",
+				       edac_dev);
+		if (res < 0) {
+			printk(KERN_ERR
+			       "%s: Unable to request irq %d for MV64x60 "
+			       "CPU ERR\n", __func__, pdata->irq);
+			res = -ENODEV;
+			goto err2;
+		}
+
+		printk(KERN_INFO EDAC_MOD_STR
+		       " acquired irq %d for CPU Err\n", pdata->irq);
+	}
+
+	devres_remove_group(&pdev->dev, mv64x60_cpu_err_probe);
+
+	/* get this far and it's successful */
+	edac_dbg(3, "success\n");
+
+	return 0;
+
+err2:
+	edac_device_del_device(&pdev->dev);
+err:
+	devres_release_group(&pdev->dev, mv64x60_cpu_err_probe);
+	edac_device_free_ctl_info(edac_dev);
+	return res;
+}
+
+static int mv64x60_cpu_err_remove(struct platform_device *pdev)
+{
+	struct edac_device_ctl_info *edac_dev = platform_get_drvdata(pdev);
+
+	edac_dbg(0, "\n");
+
+	edac_device_del_device(&pdev->dev);
+	edac_device_free_ctl_info(edac_dev);
+	return 0;
+}
+
+static struct platform_driver mv64x60_cpu_err_driver = {
+	.probe = mv64x60_cpu_err_probe,
+	.remove = mv64x60_cpu_err_remove,
+	.driver = {
+		   .name = "mv64x60_cpu_err",
+	}
+};
+
+/*********************** DRAM err device **********************************/
+
+static void mv64x60_mc_check(struct mem_ctl_info *mci)
+{
+	struct mv64x60_mc_pdata *pdata = mci->pvt_info;
+	u32 reg;
+	u32 err_addr;
+	u32 sdram_ecc;
+	u32 comp_ecc;
+	u32 syndrome;
+
+	reg = readl(pdata->mc_vbase + MV64X60_SDRAM_ERR_ADDR);
+	if (!reg)
+		return;
+
+	err_addr = reg & ~0x3;
+	sdram_ecc = readl(pdata->mc_vbase + MV64X60_SDRAM_ERR_ECC_RCVD);
+	comp_ecc = readl(pdata->mc_vbase + MV64X60_SDRAM_ERR_ECC_CALC);
+	syndrome = sdram_ecc ^ comp_ecc;
+
+	/* first bit clear in ECC Err Reg, 1 bit error, correctable by HW */
+	if (!(reg & 0x1))
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+				     err_addr >> PAGE_SHIFT,
+				     err_addr & PAGE_MASK, syndrome,
+				     0, 0, -1,
+				     mci->ctl_name, "");
+	else	/* 2 bit error, UE */
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+				     err_addr >> PAGE_SHIFT,
+				     err_addr & PAGE_MASK, 0,
+				     0, 0, -1,
+				     mci->ctl_name, "");
+
+	/* clear the error */
+	writel(0, pdata->mc_vbase + MV64X60_SDRAM_ERR_ADDR);
+}
+
+static irqreturn_t mv64x60_mc_isr(int irq, void *dev_id)
+{
+	struct mem_ctl_info *mci = dev_id;
+	struct mv64x60_mc_pdata *pdata = mci->pvt_info;
+	u32 reg;
+
+	reg = readl(pdata->mc_vbase + MV64X60_SDRAM_ERR_ADDR);
+	if (!reg)
+		return IRQ_NONE;
+
+	/* writing 0's to the ECC err addr in check function clears irq */
+	mv64x60_mc_check(mci);
+
+	return IRQ_HANDLED;
+}
+
+static void get_total_mem(struct mv64x60_mc_pdata *pdata)
+{
+	struct device_node *np = NULL;
+	const unsigned int *reg;
+
+	np = of_find_node_by_type(NULL, "memory");
+	if (!np)
+		return;
+
+	reg = of_get_property(np, "reg", NULL);
+
+	pdata->total_mem = reg[1];
+}
+
+static void mv64x60_init_csrows(struct mem_ctl_info *mci,
+				struct mv64x60_mc_pdata *pdata)
+{
+	struct csrow_info *csrow;
+	struct dimm_info *dimm;
+
+	u32 devtype;
+	u32 ctl;
+
+	get_total_mem(pdata);
+
+	ctl = readl(pdata->mc_vbase + MV64X60_SDRAM_CONFIG);
+
+	csrow = mci->csrows[0];
+	dimm = csrow->channels[0]->dimm;
+
+	dimm->nr_pages = pdata->total_mem >> PAGE_SHIFT;
+	dimm->grain = 8;
+
+	dimm->mtype = (ctl & MV64X60_SDRAM_REGISTERED) ? MEM_RDDR : MEM_DDR;
+
+	devtype = (ctl >> 20) & 0x3;
+	switch (devtype) {
+	case 0x0:
+		dimm->dtype = DEV_X32;
+		break;
+	case 0x2:		/* could be X8 too, but no way to tell */
+		dimm->dtype = DEV_X16;
+		break;
+	case 0x3:
+		dimm->dtype = DEV_X4;
+		break;
+	default:
+		dimm->dtype = DEV_UNKNOWN;
+		break;
+	}
+
+	dimm->edac_mode = EDAC_SECDED;
+}
+
+static int mv64x60_mc_err_probe(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[2];
+	struct mv64x60_mc_pdata *pdata;
+	struct resource *r;
+	u32 ctl;
+	int res = 0;
+
+	if (!devres_open_group(&pdev->dev, mv64x60_mc_err_probe, GFP_KERNEL))
+		return -ENOMEM;
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = 1;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = 1;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), layers,
+			    sizeof(struct mv64x60_mc_pdata));
+	if (!mci) {
+		printk(KERN_ERR "%s: No memory for CPU err\n", __func__);
+		devres_release_group(&pdev->dev, mv64x60_mc_err_probe);
+		return -ENOMEM;
+	}
+
+	pdata = mci->pvt_info;
+	mci->pdev = &pdev->dev;
+	platform_set_drvdata(pdev, mci);
+	pdata->name = "mv64x60_mc_err";
+	mci->dev_name = dev_name(&pdev->dev);
+	pdata->edac_idx = edac_mc_idx++;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		printk(KERN_ERR "%s: Unable to get resource for "
+		       "MC err regs\n", __func__);
+		res = -ENOENT;
+		goto err;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev,
+				     r->start,
+				     resource_size(r),
+				     pdata->name)) {
+		printk(KERN_ERR "%s: Error while requesting mem region\n",
+		       __func__);
+		res = -EBUSY;
+		goto err;
+	}
+
+	pdata->mc_vbase = devm_ioremap(&pdev->dev,
+				       r->start,
+				       resource_size(r));
+	if (!pdata->mc_vbase) {
+		printk(KERN_ERR "%s: Unable to setup MC err regs\n", __func__);
+		res = -ENOMEM;
+		goto err;
+	}
+
+	ctl = readl(pdata->mc_vbase + MV64X60_SDRAM_CONFIG);
+	if (!(ctl & MV64X60_SDRAM_ECC)) {
+		/* Non-ECC RAM? */
+		printk(KERN_WARNING "%s: No ECC DIMMs discovered\n", __func__);
+		res = -ENODEV;
+		goto err;
+	}
+
+	edac_dbg(3, "init mci\n");
+	mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_DDR;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->mod_name = EDAC_MOD_STR;
+	mci->ctl_name = mv64x60_ctl_name;
+
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		mci->edac_check = mv64x60_mc_check;
+
+	mci->ctl_page_to_phys = NULL;
+
+	mci->scrub_mode = SCRUB_SW_SRC;
+
+	mv64x60_init_csrows(mci, pdata);
+
+	/* setup MC registers */
+	writel(0, pdata->mc_vbase + MV64X60_SDRAM_ERR_ADDR);
+	ctl = readl(pdata->mc_vbase + MV64X60_SDRAM_ERR_ECC_CNTL);
+	ctl = (ctl & 0xff00ffff) | 0x10000;
+	writel(ctl, pdata->mc_vbase + MV64X60_SDRAM_ERR_ECC_CNTL);
+
+	res = edac_mc_add_mc(mci);
+	if (res) {
+		edac_dbg(3, "failed edac_mc_add_mc()\n");
+		goto err;
+	}
+
+	if (edac_op_state == EDAC_OPSTATE_INT) {
+		/* acquire interrupt that reports errors */
+		pdata->irq = platform_get_irq(pdev, 0);
+		res = devm_request_irq(&pdev->dev,
+				       pdata->irq,
+				       mv64x60_mc_isr,
+				       0,
+				       "[EDAC] MC err",
+				       mci);
+		if (res < 0) {
+			printk(KERN_ERR "%s: Unable to request irq %d for "
+			       "MV64x60 DRAM ERR\n", __func__, pdata->irq);
+			res = -ENODEV;
+			goto err2;
+		}
+
+		printk(KERN_INFO EDAC_MOD_STR " acquired irq %d for MC Err\n",
+		       pdata->irq);
+	}
+
+	/* get this far and it's successful */
+	edac_dbg(3, "success\n");
+
+	return 0;
+
+err2:
+	edac_mc_del_mc(&pdev->dev);
+err:
+	devres_release_group(&pdev->dev, mv64x60_mc_err_probe);
+	edac_mc_free(mci);
+	return res;
+}
+
+static int mv64x60_mc_err_remove(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+	edac_dbg(0, "\n");
+
+	edac_mc_del_mc(&pdev->dev);
+	edac_mc_free(mci);
+	return 0;
+}
+
+static struct platform_driver mv64x60_mc_err_driver = {
+	.probe = mv64x60_mc_err_probe,
+	.remove = mv64x60_mc_err_remove,
+	.driver = {
+		   .name = "mv64x60_mc_err",
+	}
+};
+
+static struct platform_driver * const drivers[] = {
+	&mv64x60_mc_err_driver,
+	&mv64x60_cpu_err_driver,
+	&mv64x60_sram_err_driver,
+#ifdef CONFIG_PCI
+	&mv64x60_pci_err_driver,
+#endif
+};
+
+static int __init mv64x60_edac_init(void)
+{
+
+	printk(KERN_INFO "Marvell MV64x60 EDAC driver " MV64x60_REVISION "\n");
+	printk(KERN_INFO "\t(C) 2006-2007 MontaVista Software\n");
+
+	/* make sure error reporting method is sane */
+	switch (edac_op_state) {
+	case EDAC_OPSTATE_POLL:
+	case EDAC_OPSTATE_INT:
+		break;
+	default:
+		edac_op_state = EDAC_OPSTATE_INT;
+		break;
+	}
+
+	return platform_register_drivers(drivers, ARRAY_SIZE(drivers));
+}
+module_init(mv64x60_edac_init);
+
+static void __exit mv64x60_edac_exit(void)
+{
+	platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
+}
+module_exit(mv64x60_edac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Montavista Software, Inc.");
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state,
+		 "EDAC Error Reporting state: 0=Poll, 2=Interrupt");
diff --git a/drivers/edac/mv64x60_edac.h b/drivers/edac/mv64x60_edac.h
new file mode 100644
index 000000000..c7f209c92
--- /dev/null
+++ b/drivers/edac/mv64x60_edac.h
@@ -0,0 +1,114 @@
+/*
+ * EDAC defs for Marvell MV64x60 bridge chip
+ *
+ * Author: Dave Jiang <djiang@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+#ifndef _MV64X60_EDAC_H_
+#define _MV64X60_EDAC_H_
+
+#define MV64x60_REVISION " Ver: 2.0.0"
+#define EDAC_MOD_STR	"MV64x60_edac"
+
+#define mv64x60_printk(level, fmt, arg...) \
+	edac_printk(level, "MV64x60", fmt, ##arg)
+
+#define mv64x60_mc_printk(mci, level, fmt, arg...) \
+	edac_mc_chipset_printk(mci, level, "MV64x60", fmt, ##arg)
+
+/* CPU Error Report Registers */
+#define MV64x60_CPU_ERR_ADDR_LO		0x00	/* 0x0070 */
+#define MV64x60_CPU_ERR_ADDR_HI		0x08	/* 0x0078 */
+#define MV64x60_CPU_ERR_DATA_LO		0x00	/* 0x0128 */
+#define MV64x60_CPU_ERR_DATA_HI		0x08	/* 0x0130 */
+#define MV64x60_CPU_ERR_PARITY		0x10	/* 0x0138 */
+#define MV64x60_CPU_ERR_CAUSE		0x18	/* 0x0140 */
+#define MV64x60_CPU_ERR_MASK		0x20	/* 0x0148 */
+
+#define MV64x60_CPU_CAUSE_MASK		0x07ffffff
+
+/* SRAM Error Report Registers */
+#define MV64X60_SRAM_ERR_CAUSE		0x08	/* 0x0388 */
+#define MV64X60_SRAM_ERR_ADDR_LO	0x10	/* 0x0390 */
+#define MV64X60_SRAM_ERR_ADDR_HI	0x78	/* 0x03f8 */
+#define MV64X60_SRAM_ERR_DATA_LO	0x18	/* 0x0398 */
+#define MV64X60_SRAM_ERR_DATA_HI	0x20	/* 0x03a0 */
+#define MV64X60_SRAM_ERR_PARITY		0x28	/* 0x03a8 */
+
+/* SDRAM Controller Registers */
+#define MV64X60_SDRAM_CONFIG		0x00	/* 0x1400 */
+#define MV64X60_SDRAM_ERR_DATA_HI	0x40	/* 0x1440 */
+#define MV64X60_SDRAM_ERR_DATA_LO	0x44	/* 0x1444 */
+#define MV64X60_SDRAM_ERR_ECC_RCVD	0x48	/* 0x1448 */
+#define MV64X60_SDRAM_ERR_ECC_CALC	0x4c	/* 0x144c */
+#define MV64X60_SDRAM_ERR_ADDR		0x50	/* 0x1450 */
+#define MV64X60_SDRAM_ERR_ECC_CNTL	0x54	/* 0x1454 */
+#define MV64X60_SDRAM_ERR_ECC_ERR_CNT	0x58	/* 0x1458 */
+
+#define MV64X60_SDRAM_REGISTERED	0x20000
+#define MV64X60_SDRAM_ECC		0x40000
+
+#ifdef CONFIG_PCI
+/*
+ * Bit 0 of MV64x60_PCIx_ERR_MASK does not exist on the 64360 and because of
+ * errata FEr-#11 and FEr-##16 for the 64460, it should be 0 on that chip as
+ * well.  IOW, don't set bit 0.
+ */
+#define MV64X60_PCIx_ERR_MASK_VAL	0x00a50c24
+
+/* Register offsets from PCIx error address low register */
+#define MV64X60_PCI_ERROR_ADDR_LO	0x00
+#define MV64X60_PCI_ERROR_ADDR_HI	0x04
+#define MV64X60_PCI_ERROR_ATTR		0x08
+#define MV64X60_PCI_ERROR_CMD		0x10
+#define MV64X60_PCI_ERROR_CAUSE		0x18
+#define MV64X60_PCI_ERROR_MASK		0x1c
+
+#define MV64X60_PCI_ERR_SWrPerr		0x0002
+#define MV64X60_PCI_ERR_SRdPerr		0x0004
+#define	MV64X60_PCI_ERR_MWrPerr		0x0020
+#define MV64X60_PCI_ERR_MRdPerr		0x0040
+
+#define MV64X60_PCI_PE_MASK	(MV64X60_PCI_ERR_SWrPerr | \
+				MV64X60_PCI_ERR_SRdPerr | \
+				MV64X60_PCI_ERR_MWrPerr | \
+				MV64X60_PCI_ERR_MRdPerr)
+
+struct mv64x60_pci_pdata {
+	int pci_hose;
+	void __iomem *pci_vbase;
+	char *name;
+	int irq;
+	int edac_idx;
+};
+
+#endif				/* CONFIG_PCI */
+
+struct mv64x60_mc_pdata {
+	void __iomem *mc_vbase;
+	int total_mem;
+	char *name;
+	int irq;
+	int edac_idx;
+};
+
+struct mv64x60_cpu_pdata {
+	void __iomem *cpu_vbase[2];
+	char *name;
+	int irq;
+	int edac_idx;
+};
+
+struct mv64x60_sram_pdata {
+	void __iomem *sram_vbase;
+	char *name;
+	int irq;
+	int edac_idx;
+};
+
+#endif
diff --git a/drivers/edac/octeon_edac-l2c.c b/drivers/edac/octeon_edac-l2c.c
new file mode 100644
index 000000000..c33059e9b
--- /dev/null
+++ b/drivers/edac/octeon_edac-l2c.c
@@ -0,0 +1,207 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2012 Cavium, Inc.
+ *
+ * Copyright (C) 2009 Wind River Systems,
+ *   written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/edac.h>
+
+#include <asm/octeon/cvmx.h>
+
+#include "edac_module.h"
+
+#define EDAC_MOD_STR "octeon-l2c"
+
+static void octeon_l2c_poll_oct1(struct edac_device_ctl_info *l2c)
+{
+	union cvmx_l2t_err l2t_err, l2t_err_reset;
+	union cvmx_l2d_err l2d_err, l2d_err_reset;
+
+	l2t_err_reset.u64 = 0;
+	l2t_err.u64 = cvmx_read_csr(CVMX_L2T_ERR);
+	if (l2t_err.s.sec_err) {
+		edac_device_handle_ce(l2c, 0, 0,
+				      "Tag Single bit error (corrected)");
+		l2t_err_reset.s.sec_err = 1;
+	}
+	if (l2t_err.s.ded_err) {
+		edac_device_handle_ue(l2c, 0, 0,
+				      "Tag Double bit error (detected)");
+		l2t_err_reset.s.ded_err = 1;
+	}
+	if (l2t_err_reset.u64)
+		cvmx_write_csr(CVMX_L2T_ERR, l2t_err_reset.u64);
+
+	l2d_err_reset.u64 = 0;
+	l2d_err.u64 = cvmx_read_csr(CVMX_L2D_ERR);
+	if (l2d_err.s.sec_err) {
+		edac_device_handle_ce(l2c, 0, 1,
+				      "Data Single bit error (corrected)");
+		l2d_err_reset.s.sec_err = 1;
+	}
+	if (l2d_err.s.ded_err) {
+		edac_device_handle_ue(l2c, 0, 1,
+				      "Data Double bit error (detected)");
+		l2d_err_reset.s.ded_err = 1;
+	}
+	if (l2d_err_reset.u64)
+		cvmx_write_csr(CVMX_L2D_ERR, l2d_err_reset.u64);
+
+}
+
+static void _octeon_l2c_poll_oct2(struct edac_device_ctl_info *l2c, int tad)
+{
+	union cvmx_l2c_err_tdtx err_tdtx, err_tdtx_reset;
+	union cvmx_l2c_err_ttgx err_ttgx, err_ttgx_reset;
+	char buf1[64];
+	char buf2[80];
+
+	err_tdtx_reset.u64 = 0;
+	err_tdtx.u64 = cvmx_read_csr(CVMX_L2C_ERR_TDTX(tad));
+	if (err_tdtx.s.dbe || err_tdtx.s.sbe ||
+	    err_tdtx.s.vdbe || err_tdtx.s.vsbe)
+		snprintf(buf1, sizeof(buf1),
+			 "type:%d, syn:0x%x, way:%d",
+			 err_tdtx.s.type, err_tdtx.s.syn, err_tdtx.s.wayidx);
+
+	if (err_tdtx.s.dbe) {
+		snprintf(buf2, sizeof(buf2),
+			 "L2D Double bit error (detected):%s", buf1);
+		err_tdtx_reset.s.dbe = 1;
+		edac_device_handle_ue(l2c, tad, 1, buf2);
+	}
+	if (err_tdtx.s.sbe) {
+		snprintf(buf2, sizeof(buf2),
+			 "L2D Single bit error (corrected):%s", buf1);
+		err_tdtx_reset.s.sbe = 1;
+		edac_device_handle_ce(l2c, tad, 1, buf2);
+	}
+	if (err_tdtx.s.vdbe) {
+		snprintf(buf2, sizeof(buf2),
+			 "VBF Double bit error (detected):%s", buf1);
+		err_tdtx_reset.s.vdbe = 1;
+		edac_device_handle_ue(l2c, tad, 1, buf2);
+	}
+	if (err_tdtx.s.vsbe) {
+		snprintf(buf2, sizeof(buf2),
+			 "VBF Single bit error (corrected):%s", buf1);
+		err_tdtx_reset.s.vsbe = 1;
+		edac_device_handle_ce(l2c, tad, 1, buf2);
+	}
+	if (err_tdtx_reset.u64)
+		cvmx_write_csr(CVMX_L2C_ERR_TDTX(tad), err_tdtx_reset.u64);
+
+	err_ttgx_reset.u64 = 0;
+	err_ttgx.u64 = cvmx_read_csr(CVMX_L2C_ERR_TTGX(tad));
+
+	if (err_ttgx.s.dbe || err_ttgx.s.sbe)
+		snprintf(buf1, sizeof(buf1),
+			 "type:%d, syn:0x%x, way:%d",
+			 err_ttgx.s.type, err_ttgx.s.syn, err_ttgx.s.wayidx);
+
+	if (err_ttgx.s.dbe) {
+		snprintf(buf2, sizeof(buf2),
+			 "Tag Double bit error (detected):%s", buf1);
+		err_ttgx_reset.s.dbe = 1;
+		edac_device_handle_ue(l2c, tad, 0, buf2);
+	}
+	if (err_ttgx.s.sbe) {
+		snprintf(buf2, sizeof(buf2),
+			 "Tag Single bit error (corrected):%s", buf1);
+		err_ttgx_reset.s.sbe = 1;
+		edac_device_handle_ce(l2c, tad, 0, buf2);
+	}
+	if (err_ttgx_reset.u64)
+		cvmx_write_csr(CVMX_L2C_ERR_TTGX(tad), err_ttgx_reset.u64);
+}
+
+static void octeon_l2c_poll_oct2(struct edac_device_ctl_info *l2c)
+{
+	int i;
+	for (i = 0; i < l2c->nr_instances; i++)
+		_octeon_l2c_poll_oct2(l2c, i);
+}
+
+static int octeon_l2c_probe(struct platform_device *pdev)
+{
+	struct edac_device_ctl_info *l2c;
+
+	int num_tads = OCTEON_IS_MODEL(OCTEON_CN68XX) ? 4 : 1;
+
+	/* 'Tags' are block 0, 'Data' is block 1*/
+	l2c = edac_device_alloc_ctl_info(0, "l2c", num_tads, "l2c", 2, 0,
+					 NULL, 0, edac_device_alloc_index());
+	if (!l2c)
+		return -ENOMEM;
+
+	l2c->dev = &pdev->dev;
+	platform_set_drvdata(pdev, l2c);
+	l2c->dev_name = dev_name(&pdev->dev);
+
+	l2c->mod_name = "octeon-l2c";
+	l2c->ctl_name = "octeon_l2c_err";
+
+
+	if (OCTEON_IS_OCTEON1PLUS()) {
+		union cvmx_l2t_err l2t_err;
+		union cvmx_l2d_err l2d_err;
+
+		l2t_err.u64 = cvmx_read_csr(CVMX_L2T_ERR);
+		l2t_err.s.sec_intena = 0;	/* We poll */
+		l2t_err.s.ded_intena = 0;
+		cvmx_write_csr(CVMX_L2T_ERR, l2t_err.u64);
+
+		l2d_err.u64 = cvmx_read_csr(CVMX_L2D_ERR);
+		l2d_err.s.sec_intena = 0;	/* We poll */
+		l2d_err.s.ded_intena = 0;
+		cvmx_write_csr(CVMX_L2T_ERR, l2d_err.u64);
+
+		l2c->edac_check = octeon_l2c_poll_oct1;
+	} else {
+		/* OCTEON II */
+		l2c->edac_check = octeon_l2c_poll_oct2;
+	}
+
+	if (edac_device_add_device(l2c) > 0) {
+		pr_err("%s: edac_device_add_device() failed\n", __func__);
+		goto err;
+	}
+
+
+	return 0;
+
+err:
+	edac_device_free_ctl_info(l2c);
+
+	return -ENXIO;
+}
+
+static int octeon_l2c_remove(struct platform_device *pdev)
+{
+	struct edac_device_ctl_info *l2c = platform_get_drvdata(pdev);
+
+	edac_device_del_device(&pdev->dev);
+	edac_device_free_ctl_info(l2c);
+
+	return 0;
+}
+
+static struct platform_driver octeon_l2c_driver = {
+	.probe = octeon_l2c_probe,
+	.remove = octeon_l2c_remove,
+	.driver = {
+		   .name = "octeon_l2c_edac",
+	}
+};
+module_platform_driver(octeon_l2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
diff --git a/drivers/edac/octeon_edac-lmc.c b/drivers/edac/octeon_edac-lmc.c
new file mode 100644
index 000000000..aeb222ca3
--- /dev/null
+++ b/drivers/edac/octeon_edac-lmc.c
@@ -0,0 +1,324 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wind River Systems,
+ *   written by Ralf Baechle <ralf@linux-mips.org>
+ *
+ * Copyright (c) 2013 by Cisco Systems, Inc.
+ * All rights reserved.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/edac.h>
+#include <linux/ctype.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-lmcx-defs.h>
+
+#include "edac_module.h"
+
+#define OCTEON_MAX_MC 4
+
+#define to_mci(k) container_of(k, struct mem_ctl_info, dev)
+
+struct octeon_lmc_pvt {
+	unsigned long inject;
+	unsigned long error_type;
+	unsigned long dimm;
+	unsigned long rank;
+	unsigned long bank;
+	unsigned long row;
+	unsigned long col;
+};
+
+static void octeon_lmc_edac_poll(struct mem_ctl_info *mci)
+{
+	union cvmx_lmcx_mem_cfg0 cfg0;
+	bool do_clear = false;
+	char msg[64];
+
+	cfg0.u64 = cvmx_read_csr(CVMX_LMCX_MEM_CFG0(mci->mc_idx));
+	if (cfg0.s.sec_err || cfg0.s.ded_err) {
+		union cvmx_lmcx_fadr fadr;
+		fadr.u64 = cvmx_read_csr(CVMX_LMCX_FADR(mci->mc_idx));
+		snprintf(msg, sizeof(msg),
+			 "DIMM %d rank %d bank %d row %d col %d",
+			 fadr.cn30xx.fdimm, fadr.cn30xx.fbunk,
+			 fadr.cn30xx.fbank, fadr.cn30xx.frow, fadr.cn30xx.fcol);
+	}
+
+	if (cfg0.s.sec_err) {
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 0, 0, 0,
+				     -1, -1, -1, msg, "");
+		cfg0.s.sec_err = -1;	/* Done, re-arm */
+		do_clear = true;
+	}
+
+	if (cfg0.s.ded_err) {
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
+				     -1, -1, -1, msg, "");
+		cfg0.s.ded_err = -1;	/* Done, re-arm */
+		do_clear = true;
+	}
+	if (do_clear)
+		cvmx_write_csr(CVMX_LMCX_MEM_CFG0(mci->mc_idx), cfg0.u64);
+}
+
+static void octeon_lmc_edac_poll_o2(struct mem_ctl_info *mci)
+{
+	struct octeon_lmc_pvt *pvt = mci->pvt_info;
+	union cvmx_lmcx_int int_reg;
+	bool do_clear = false;
+	char msg[64];
+
+	if (!pvt->inject)
+		int_reg.u64 = cvmx_read_csr(CVMX_LMCX_INT(mci->mc_idx));
+	else {
+		int_reg.u64 = 0;
+		if (pvt->error_type == 1)
+			int_reg.s.sec_err = 1;
+		if (pvt->error_type == 2)
+			int_reg.s.ded_err = 1;
+	}
+
+	if (int_reg.s.sec_err || int_reg.s.ded_err) {
+		union cvmx_lmcx_fadr fadr;
+		if (likely(!pvt->inject))
+			fadr.u64 = cvmx_read_csr(CVMX_LMCX_FADR(mci->mc_idx));
+		else {
+			fadr.cn61xx.fdimm = pvt->dimm;
+			fadr.cn61xx.fbunk = pvt->rank;
+			fadr.cn61xx.fbank = pvt->bank;
+			fadr.cn61xx.frow = pvt->row;
+			fadr.cn61xx.fcol = pvt->col;
+		}
+		snprintf(msg, sizeof(msg),
+			 "DIMM %d rank %d bank %d row %d col %d",
+			 fadr.cn61xx.fdimm, fadr.cn61xx.fbunk,
+			 fadr.cn61xx.fbank, fadr.cn61xx.frow, fadr.cn61xx.fcol);
+	}
+
+	if (int_reg.s.sec_err) {
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 0, 0, 0,
+				     -1, -1, -1, msg, "");
+		int_reg.s.sec_err = -1;	/* Done, re-arm */
+		do_clear = true;
+	}
+
+	if (int_reg.s.ded_err) {
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
+				     -1, -1, -1, msg, "");
+		int_reg.s.ded_err = -1;	/* Done, re-arm */
+		do_clear = true;
+	}
+
+	if (do_clear) {
+		if (likely(!pvt->inject))
+			cvmx_write_csr(CVMX_LMCX_INT(mci->mc_idx), int_reg.u64);
+		else
+			pvt->inject = 0;
+	}
+}
+
+/************************ MC SYSFS parts ***********************************/
+
+/* Only a couple naming differences per template, so very similar */
+#define TEMPLATE_SHOW(reg)						\
+static ssize_t octeon_mc_inject_##reg##_show(struct device *dev,	\
+			       struct device_attribute *attr,		\
+			       char *data)				\
+{									\
+	struct mem_ctl_info *mci = to_mci(dev);				\
+	struct octeon_lmc_pvt *pvt = mci->pvt_info;			\
+	return sprintf(data, "%016llu\n", (u64)pvt->reg);		\
+}
+
+#define TEMPLATE_STORE(reg)						\
+static ssize_t octeon_mc_inject_##reg##_store(struct device *dev,	\
+			       struct device_attribute *attr,		\
+			       const char *data, size_t count)		\
+{									\
+	struct mem_ctl_info *mci = to_mci(dev);				\
+	struct octeon_lmc_pvt *pvt = mci->pvt_info;			\
+	if (isdigit(*data)) {						\
+		if (!kstrtoul(data, 0, &pvt->reg))			\
+			return count;					\
+	}								\
+	return 0;							\
+}
+
+TEMPLATE_SHOW(inject);
+TEMPLATE_STORE(inject);
+TEMPLATE_SHOW(dimm);
+TEMPLATE_STORE(dimm);
+TEMPLATE_SHOW(bank);
+TEMPLATE_STORE(bank);
+TEMPLATE_SHOW(rank);
+TEMPLATE_STORE(rank);
+TEMPLATE_SHOW(row);
+TEMPLATE_STORE(row);
+TEMPLATE_SHOW(col);
+TEMPLATE_STORE(col);
+
+static ssize_t octeon_mc_inject_error_type_store(struct device *dev,
+					  struct device_attribute *attr,
+					  const char *data,
+					  size_t count)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct octeon_lmc_pvt *pvt = mci->pvt_info;
+
+	if (!strncmp(data, "single", 6))
+		pvt->error_type = 1;
+	else if (!strncmp(data, "double", 6))
+		pvt->error_type = 2;
+
+	return count;
+}
+
+static ssize_t octeon_mc_inject_error_type_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *data)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	struct octeon_lmc_pvt *pvt = mci->pvt_info;
+	if (pvt->error_type == 1)
+		return sprintf(data, "single");
+	else if (pvt->error_type == 2)
+		return sprintf(data, "double");
+
+	return 0;
+}
+
+static DEVICE_ATTR(inject, S_IRUGO | S_IWUSR,
+		   octeon_mc_inject_inject_show, octeon_mc_inject_inject_store);
+static DEVICE_ATTR(error_type, S_IRUGO | S_IWUSR,
+		   octeon_mc_inject_error_type_show, octeon_mc_inject_error_type_store);
+static DEVICE_ATTR(dimm, S_IRUGO | S_IWUSR,
+		   octeon_mc_inject_dimm_show, octeon_mc_inject_dimm_store);
+static DEVICE_ATTR(rank, S_IRUGO | S_IWUSR,
+		   octeon_mc_inject_rank_show, octeon_mc_inject_rank_store);
+static DEVICE_ATTR(bank, S_IRUGO | S_IWUSR,
+		   octeon_mc_inject_bank_show, octeon_mc_inject_bank_store);
+static DEVICE_ATTR(row, S_IRUGO | S_IWUSR,
+		   octeon_mc_inject_row_show, octeon_mc_inject_row_store);
+static DEVICE_ATTR(col, S_IRUGO | S_IWUSR,
+		   octeon_mc_inject_col_show, octeon_mc_inject_col_store);
+
+static struct attribute *octeon_dev_attrs[] = {
+	&dev_attr_inject.attr,
+	&dev_attr_error_type.attr,
+	&dev_attr_dimm.attr,
+	&dev_attr_rank.attr,
+	&dev_attr_bank.attr,
+	&dev_attr_row.attr,
+	&dev_attr_col.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(octeon_dev);
+
+static int octeon_lmc_edac_probe(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[1];
+	int mc = pdev->id;
+
+	opstate_init();
+
+	layers[0].type = EDAC_MC_LAYER_CHANNEL;
+	layers[0].size = 1;
+	layers[0].is_virt_csrow = false;
+
+	if (OCTEON_IS_OCTEON1PLUS()) {
+		union cvmx_lmcx_mem_cfg0 cfg0;
+
+		cfg0.u64 = cvmx_read_csr(CVMX_LMCX_MEM_CFG0(0));
+		if (!cfg0.s.ecc_ena) {
+			dev_info(&pdev->dev, "Disabled (ECC not enabled)\n");
+			return 0;
+		}
+
+		mci = edac_mc_alloc(mc, ARRAY_SIZE(layers), layers, sizeof(struct octeon_lmc_pvt));
+		if (!mci)
+			return -ENXIO;
+
+		mci->pdev = &pdev->dev;
+		mci->dev_name = dev_name(&pdev->dev);
+
+		mci->mod_name = "octeon-lmc";
+		mci->ctl_name = "octeon-lmc-err";
+		mci->edac_check = octeon_lmc_edac_poll;
+
+		if (edac_mc_add_mc_with_groups(mci, octeon_dev_groups)) {
+			dev_err(&pdev->dev, "edac_mc_add_mc() failed\n");
+			edac_mc_free(mci);
+			return -ENXIO;
+		}
+
+		cfg0.u64 = cvmx_read_csr(CVMX_LMCX_MEM_CFG0(mc));
+		cfg0.s.intr_ded_ena = 0;	/* We poll */
+		cfg0.s.intr_sec_ena = 0;
+		cvmx_write_csr(CVMX_LMCX_MEM_CFG0(mc), cfg0.u64);
+	} else {
+		/* OCTEON II */
+		union cvmx_lmcx_int_en en;
+		union cvmx_lmcx_config config;
+
+		config.u64 = cvmx_read_csr(CVMX_LMCX_CONFIG(0));
+		if (!config.s.ecc_ena) {
+			dev_info(&pdev->dev, "Disabled (ECC not enabled)\n");
+			return 0;
+		}
+
+		mci = edac_mc_alloc(mc, ARRAY_SIZE(layers), layers, sizeof(struct octeon_lmc_pvt));
+		if (!mci)
+			return -ENXIO;
+
+		mci->pdev = &pdev->dev;
+		mci->dev_name = dev_name(&pdev->dev);
+
+		mci->mod_name = "octeon-lmc";
+		mci->ctl_name = "co_lmc_err";
+		mci->edac_check = octeon_lmc_edac_poll_o2;
+
+		if (edac_mc_add_mc_with_groups(mci, octeon_dev_groups)) {
+			dev_err(&pdev->dev, "edac_mc_add_mc() failed\n");
+			edac_mc_free(mci);
+			return -ENXIO;
+		}
+
+		en.u64 = cvmx_read_csr(CVMX_LMCX_MEM_CFG0(mc));
+		en.s.intr_ded_ena = 0;	/* We poll */
+		en.s.intr_sec_ena = 0;
+		cvmx_write_csr(CVMX_LMCX_MEM_CFG0(mc), en.u64);
+	}
+	platform_set_drvdata(pdev, mci);
+
+	return 0;
+}
+
+static int octeon_lmc_edac_remove(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+	edac_mc_del_mc(&pdev->dev);
+	edac_mc_free(mci);
+	return 0;
+}
+
+static struct platform_driver octeon_lmc_edac_driver = {
+	.probe = octeon_lmc_edac_probe,
+	.remove = octeon_lmc_edac_remove,
+	.driver = {
+		   .name = "octeon_lmc_edac",
+	}
+};
+module_platform_driver(octeon_lmc_edac_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
diff --git a/drivers/edac/octeon_edac-pc.c b/drivers/edac/octeon_edac-pc.c
new file mode 100644
index 000000000..754eced59
--- /dev/null
+++ b/drivers/edac/octeon_edac-pc.c
@@ -0,0 +1,142 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2012 Cavium, Inc.
+ *
+ * Copyright (C) 2009 Wind River Systems,
+ *   written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/edac.h>
+
+#include "edac_module.h"
+
+#include <asm/octeon/cvmx.h>
+#include <asm/mipsregs.h>
+
+extern int register_co_cache_error_notifier(struct notifier_block *nb);
+extern int unregister_co_cache_error_notifier(struct notifier_block *nb);
+
+extern unsigned long long cache_err_dcache[NR_CPUS];
+
+struct co_cache_error {
+	struct notifier_block notifier;
+	struct edac_device_ctl_info *ed;
+};
+
+/**
+ * EDAC CPU cache error callback
+ *
+ * @event: non-zero if unrecoverable.
+ */
+static int  co_cache_error_event(struct notifier_block *this,
+	unsigned long event, void *ptr)
+{
+	struct co_cache_error *p = container_of(this, struct co_cache_error,
+						notifier);
+
+	unsigned int core = cvmx_get_core_num();
+	unsigned int cpu = smp_processor_id();
+	u64 icache_err = read_octeon_c0_icacheerr();
+	u64 dcache_err;
+
+	if (event) {
+		dcache_err = cache_err_dcache[core];
+		cache_err_dcache[core] = 0;
+	} else {
+		dcache_err = read_octeon_c0_dcacheerr();
+	}
+
+	if (icache_err & 1) {
+		edac_device_printk(p->ed, KERN_ERR,
+				   "CacheErr (Icache):%llx, core %d/cpu %d, cp0_errorepc == %lx\n",
+				   (unsigned long long)icache_err, core, cpu,
+				   read_c0_errorepc());
+		write_octeon_c0_icacheerr(0);
+		edac_device_handle_ce(p->ed, cpu, 1, "icache");
+	}
+	if (dcache_err & 1) {
+		edac_device_printk(p->ed, KERN_ERR,
+				   "CacheErr (Dcache):%llx, core %d/cpu %d, cp0_errorepc == %lx\n",
+				   (unsigned long long)dcache_err, core, cpu,
+				   read_c0_errorepc());
+		if (event)
+			edac_device_handle_ue(p->ed, cpu, 0, "dcache");
+		else
+			edac_device_handle_ce(p->ed, cpu, 0, "dcache");
+
+		/* Clear the error indication */
+		if (OCTEON_IS_OCTEON2())
+			write_octeon_c0_dcacheerr(1);
+		else
+			write_octeon_c0_dcacheerr(0);
+	}
+
+	return NOTIFY_STOP;
+}
+
+static int co_cache_error_probe(struct platform_device *pdev)
+{
+	struct co_cache_error *p = devm_kzalloc(&pdev->dev, sizeof(*p),
+						GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	p->notifier.notifier_call = co_cache_error_event;
+	platform_set_drvdata(pdev, p);
+
+	p->ed = edac_device_alloc_ctl_info(0, "cpu", num_possible_cpus(),
+					   "cache", 2, 0, NULL, 0,
+					   edac_device_alloc_index());
+	if (!p->ed)
+		goto err;
+
+	p->ed->dev = &pdev->dev;
+
+	p->ed->dev_name = dev_name(&pdev->dev);
+
+	p->ed->mod_name = "octeon-cpu";
+	p->ed->ctl_name = "cache";
+
+	if (edac_device_add_device(p->ed)) {
+		pr_err("%s: edac_device_add_device() failed\n", __func__);
+		goto err1;
+	}
+
+	register_co_cache_error_notifier(&p->notifier);
+
+	return 0;
+
+err1:
+	edac_device_free_ctl_info(p->ed);
+err:
+	return -ENXIO;
+}
+
+static int co_cache_error_remove(struct platform_device *pdev)
+{
+	struct co_cache_error *p = platform_get_drvdata(pdev);
+
+	unregister_co_cache_error_notifier(&p->notifier);
+	edac_device_del_device(&pdev->dev);
+	edac_device_free_ctl_info(p->ed);
+	return 0;
+}
+
+static struct platform_driver co_cache_error_driver = {
+	.probe = co_cache_error_probe,
+	.remove = co_cache_error_remove,
+	.driver = {
+		   .name = "octeon_pc_edac",
+	}
+};
+module_platform_driver(co_cache_error_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
diff --git a/drivers/edac/octeon_edac-pci.c b/drivers/edac/octeon_edac-pci.c
new file mode 100644
index 000000000..28b238eec
--- /dev/null
+++ b/drivers/edac/octeon_edac-pci.c
@@ -0,0 +1,110 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2012 Cavium, Inc.
+ * Copyright (C) 2009 Wind River Systems,
+ *   written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/edac.h>
+
+#include <asm/octeon/cvmx.h>
+#include <asm/octeon/cvmx-npi-defs.h>
+#include <asm/octeon/cvmx-pci-defs.h>
+#include <asm/octeon/octeon.h>
+
+#include "edac_module.h"
+
+static void octeon_pci_poll(struct edac_pci_ctl_info *pci)
+{
+	union cvmx_pci_cfg01 cfg01;
+
+	cfg01.u32 = octeon_npi_read32(CVMX_NPI_PCI_CFG01);
+	if (cfg01.s.dpe) {		/* Detected parity error */
+		edac_pci_handle_pe(pci, pci->ctl_name);
+		cfg01.s.dpe = 1;		/* Reset  */
+		octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32);
+	}
+	if (cfg01.s.sse) {
+		edac_pci_handle_npe(pci, "Signaled System Error");
+		cfg01.s.sse = 1;		/* Reset */
+		octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32);
+	}
+	if (cfg01.s.rma) {
+		edac_pci_handle_npe(pci, "Received Master Abort");
+		cfg01.s.rma = 1;		/* Reset */
+		octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32);
+	}
+	if (cfg01.s.rta) {
+		edac_pci_handle_npe(pci, "Received Target Abort");
+		cfg01.s.rta = 1;		/* Reset */
+		octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32);
+	}
+	if (cfg01.s.sta) {
+		edac_pci_handle_npe(pci, "Signaled Target Abort");
+		cfg01.s.sta = 1;		/* Reset */
+		octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32);
+	}
+	if (cfg01.s.mdpe) {
+		edac_pci_handle_npe(pci, "Master Data Parity Error");
+		cfg01.s.mdpe = 1;		/* Reset */
+		octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32);
+	}
+}
+
+static int octeon_pci_probe(struct platform_device *pdev)
+{
+	struct edac_pci_ctl_info *pci;
+	int res = 0;
+
+	pci = edac_pci_alloc_ctl_info(0, "octeon_pci_err");
+	if (!pci)
+		return -ENOMEM;
+
+	pci->dev = &pdev->dev;
+	platform_set_drvdata(pdev, pci);
+	pci->dev_name = dev_name(&pdev->dev);
+
+	pci->mod_name = "octeon-pci";
+	pci->ctl_name = "octeon_pci_err";
+	pci->edac_check = octeon_pci_poll;
+
+	if (edac_pci_add_device(pci, 0) > 0) {
+		pr_err("%s: edac_pci_add_device() failed\n", __func__);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	edac_pci_free_ctl_info(pci);
+
+	return res;
+}
+
+static int octeon_pci_remove(struct platform_device *pdev)
+{
+	struct edac_pci_ctl_info *pci = platform_get_drvdata(pdev);
+
+	edac_pci_del_device(&pdev->dev);
+	edac_pci_free_ctl_info(pci);
+
+	return 0;
+}
+
+static struct platform_driver octeon_pci_driver = {
+	.probe = octeon_pci_probe,
+	.remove = octeon_pci_remove,
+	.driver = {
+		   .name = "octeon_pci_edac",
+	}
+};
+module_platform_driver(octeon_pci_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
diff --git a/drivers/edac/pasemi_edac.c b/drivers/edac/pasemi_edac.c
new file mode 100644
index 000000000..199f2c804
--- /dev/null
+++ b/drivers/edac/pasemi_edac.c
@@ -0,0 +1,315 @@
+/*
+ * Copyright (C) 2006-2007 PA Semi, Inc
+ *
+ * Author: Egor Martovetsky <egor@pasemi.com>
+ * Maintained by: Olof Johansson <olof@lixom.net>
+ *
+ * Driver for the PWRficient onchip memory controllers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/edac.h>
+#include "edac_module.h"
+
+#define MODULE_NAME "pasemi_edac"
+
+#define MCCFG_MCEN				0x300
+#define   MCCFG_MCEN_MMC_EN			0x00000001
+#define MCCFG_ERRCOR				0x388
+#define   MCCFG_ERRCOR_RNK_FAIL_DET_EN		0x00000100
+#define   MCCFG_ERRCOR_ECC_GEN_EN		0x00000010
+#define   MCCFG_ERRCOR_ECC_CRR_EN		0x00000001
+#define MCCFG_SCRUB				0x384
+#define   MCCFG_SCRUB_RGLR_SCRB_EN		0x00000001
+#define MCDEBUG_ERRCTL1				0x728
+#define   MCDEBUG_ERRCTL1_RFL_LOG_EN		0x00080000
+#define   MCDEBUG_ERRCTL1_MBE_LOG_EN		0x00040000
+#define   MCDEBUG_ERRCTL1_SBE_LOG_EN		0x00020000
+#define MCDEBUG_ERRSTA				0x730
+#define   MCDEBUG_ERRSTA_RFL_STATUS		0x00000004
+#define   MCDEBUG_ERRSTA_MBE_STATUS		0x00000002
+#define   MCDEBUG_ERRSTA_SBE_STATUS		0x00000001
+#define MCDEBUG_ERRCNT1				0x734
+#define   MCDEBUG_ERRCNT1_SBE_CNT_OVRFLO	0x00000080
+#define MCDEBUG_ERRLOG1A			0x738
+#define   MCDEBUG_ERRLOG1A_MERR_TYPE_M		0x30000000
+#define   MCDEBUG_ERRLOG1A_MERR_TYPE_NONE	0x00000000
+#define   MCDEBUG_ERRLOG1A_MERR_TYPE_SBE	0x10000000
+#define   MCDEBUG_ERRLOG1A_MERR_TYPE_MBE	0x20000000
+#define   MCDEBUG_ERRLOG1A_MERR_TYPE_RFL	0x30000000
+#define   MCDEBUG_ERRLOG1A_MERR_BA_M		0x00700000
+#define   MCDEBUG_ERRLOG1A_MERR_BA_S		20
+#define   MCDEBUG_ERRLOG1A_MERR_CS_M		0x00070000
+#define   MCDEBUG_ERRLOG1A_MERR_CS_S		16
+#define   MCDEBUG_ERRLOG1A_SYNDROME_M		0x0000ffff
+#define MCDRAM_RANKCFG				0x114
+#define   MCDRAM_RANKCFG_EN			0x00000001
+#define   MCDRAM_RANKCFG_TYPE_SIZE_M		0x000001c0
+#define   MCDRAM_RANKCFG_TYPE_SIZE_S		6
+
+#define PASEMI_EDAC_NR_CSROWS			8
+#define PASEMI_EDAC_NR_CHANS			1
+#define PASEMI_EDAC_ERROR_GRAIN			64
+
+static int last_page_in_mmc;
+static int system_mmc_id;
+
+
+static u32 pasemi_edac_get_error_info(struct mem_ctl_info *mci)
+{
+	struct pci_dev *pdev = to_pci_dev(mci->pdev);
+	u32 tmp;
+
+	pci_read_config_dword(pdev, MCDEBUG_ERRSTA,
+			      &tmp);
+
+	tmp &= (MCDEBUG_ERRSTA_RFL_STATUS | MCDEBUG_ERRSTA_MBE_STATUS
+		| MCDEBUG_ERRSTA_SBE_STATUS);
+
+	if (tmp) {
+		if (tmp & MCDEBUG_ERRSTA_SBE_STATUS)
+			pci_write_config_dword(pdev, MCDEBUG_ERRCNT1,
+					       MCDEBUG_ERRCNT1_SBE_CNT_OVRFLO);
+		pci_write_config_dword(pdev, MCDEBUG_ERRSTA, tmp);
+	}
+
+	return tmp;
+}
+
+static void pasemi_edac_process_error_info(struct mem_ctl_info *mci, u32 errsta)
+{
+	struct pci_dev *pdev = to_pci_dev(mci->pdev);
+	u32 errlog1a;
+	u32 cs;
+
+	if (!errsta)
+		return;
+
+	pci_read_config_dword(pdev, MCDEBUG_ERRLOG1A, &errlog1a);
+
+	cs = (errlog1a & MCDEBUG_ERRLOG1A_MERR_CS_M) >>
+		MCDEBUG_ERRLOG1A_MERR_CS_S;
+
+	/* uncorrectable/multi-bit errors */
+	if (errsta & (MCDEBUG_ERRSTA_MBE_STATUS |
+		      MCDEBUG_ERRSTA_RFL_STATUS)) {
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+				     mci->csrows[cs]->first_page, 0, 0,
+				     cs, 0, -1, mci->ctl_name, "");
+	}
+
+	/* correctable/single-bit errors */
+	if (errsta & MCDEBUG_ERRSTA_SBE_STATUS)
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+				     mci->csrows[cs]->first_page, 0, 0,
+				     cs, 0, -1, mci->ctl_name, "");
+}
+
+static void pasemi_edac_check(struct mem_ctl_info *mci)
+{
+	u32 errsta;
+
+	errsta = pasemi_edac_get_error_info(mci);
+	if (errsta)
+		pasemi_edac_process_error_info(mci, errsta);
+}
+
+static int pasemi_edac_init_csrows(struct mem_ctl_info *mci,
+				   struct pci_dev *pdev,
+				   enum edac_type edac_mode)
+{
+	struct csrow_info *csrow;
+	struct dimm_info *dimm;
+	u32 rankcfg;
+	int index;
+
+	for (index = 0; index < mci->nr_csrows; index++) {
+		csrow = mci->csrows[index];
+		dimm = csrow->channels[0]->dimm;
+
+		pci_read_config_dword(pdev,
+				      MCDRAM_RANKCFG + (index * 12),
+				      &rankcfg);
+
+		if (!(rankcfg & MCDRAM_RANKCFG_EN))
+			continue;
+
+		switch ((rankcfg & MCDRAM_RANKCFG_TYPE_SIZE_M) >>
+			MCDRAM_RANKCFG_TYPE_SIZE_S) {
+		case 0:
+			dimm->nr_pages = 128 << (20 - PAGE_SHIFT);
+			break;
+		case 1:
+			dimm->nr_pages = 256 << (20 - PAGE_SHIFT);
+			break;
+		case 2:
+		case 3:
+			dimm->nr_pages = 512 << (20 - PAGE_SHIFT);
+			break;
+		case 4:
+			dimm->nr_pages = 1024 << (20 - PAGE_SHIFT);
+			break;
+		case 5:
+			dimm->nr_pages = 2048 << (20 - PAGE_SHIFT);
+			break;
+		default:
+			edac_mc_printk(mci, KERN_ERR,
+				"Unrecognized Rank Config. rankcfg=%u\n",
+				rankcfg);
+			return -EINVAL;
+		}
+
+		csrow->first_page = last_page_in_mmc;
+		csrow->last_page = csrow->first_page + dimm->nr_pages - 1;
+		last_page_in_mmc += dimm->nr_pages;
+		csrow->page_mask = 0;
+		dimm->grain = PASEMI_EDAC_ERROR_GRAIN;
+		dimm->mtype = MEM_DDR;
+		dimm->dtype = DEV_UNKNOWN;
+		dimm->edac_mode = edac_mode;
+	}
+	return 0;
+}
+
+static int pasemi_edac_probe(struct pci_dev *pdev,
+			     const struct pci_device_id *ent)
+{
+	struct mem_ctl_info *mci = NULL;
+	struct edac_mc_layer layers[2];
+	u32 errctl1, errcor, scrub, mcen;
+
+	pci_read_config_dword(pdev, MCCFG_MCEN, &mcen);
+	if (!(mcen & MCCFG_MCEN_MMC_EN))
+		return -ENODEV;
+
+	/*
+	 * We should think about enabling other error detection later on
+	 */
+
+	pci_read_config_dword(pdev, MCDEBUG_ERRCTL1, &errctl1);
+	errctl1 |= MCDEBUG_ERRCTL1_SBE_LOG_EN |
+		MCDEBUG_ERRCTL1_MBE_LOG_EN |
+		MCDEBUG_ERRCTL1_RFL_LOG_EN;
+	pci_write_config_dword(pdev, MCDEBUG_ERRCTL1, errctl1);
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = PASEMI_EDAC_NR_CSROWS;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = PASEMI_EDAC_NR_CHANS;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(system_mmc_id++, ARRAY_SIZE(layers), layers,
+			    0);
+	if (mci == NULL)
+		return -ENOMEM;
+
+	pci_read_config_dword(pdev, MCCFG_ERRCOR, &errcor);
+	errcor |= MCCFG_ERRCOR_RNK_FAIL_DET_EN |
+		MCCFG_ERRCOR_ECC_GEN_EN |
+		MCCFG_ERRCOR_ECC_CRR_EN;
+
+	mci->pdev = &pdev->dev;
+	mci->mtype_cap = MEM_FLAG_DDR | MEM_FLAG_RDDR;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
+	mci->edac_cap = (errcor & MCCFG_ERRCOR_ECC_GEN_EN) ?
+		((errcor & MCCFG_ERRCOR_ECC_CRR_EN) ?
+		 (EDAC_FLAG_EC | EDAC_FLAG_SECDED) : EDAC_FLAG_EC) :
+		EDAC_FLAG_NONE;
+	mci->mod_name = MODULE_NAME;
+	mci->dev_name = pci_name(pdev);
+	mci->ctl_name = "pasemi,pwrficient-mc";
+	mci->edac_check = pasemi_edac_check;
+	mci->ctl_page_to_phys = NULL;
+	pci_read_config_dword(pdev, MCCFG_SCRUB, &scrub);
+	mci->scrub_cap = SCRUB_FLAG_HW_PROG | SCRUB_FLAG_HW_SRC;
+	mci->scrub_mode =
+		((errcor & MCCFG_ERRCOR_ECC_CRR_EN) ? SCRUB_FLAG_HW_SRC : 0) |
+		((scrub & MCCFG_SCRUB_RGLR_SCRB_EN) ? SCRUB_FLAG_HW_PROG : 0);
+
+	if (pasemi_edac_init_csrows(mci, pdev,
+				    (mci->edac_cap & EDAC_FLAG_SECDED) ?
+				    EDAC_SECDED :
+				    ((mci->edac_cap & EDAC_FLAG_EC) ?
+				     EDAC_EC : EDAC_NONE)))
+		goto fail;
+
+	/*
+	 * Clear status
+	 */
+	pasemi_edac_get_error_info(mci);
+
+	if (edac_mc_add_mc(mci))
+		goto fail;
+
+	/* get this far and it's successful */
+	return 0;
+
+fail:
+	edac_mc_free(mci);
+	return -ENODEV;
+}
+
+static void pasemi_edac_remove(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci = edac_mc_del_mc(&pdev->dev);
+
+	if (!mci)
+		return;
+
+	edac_mc_free(mci);
+}
+
+
+static const struct pci_device_id pasemi_edac_pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_PASEMI, 0xa00a) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(pci, pasemi_edac_pci_tbl);
+
+static struct pci_driver pasemi_edac_driver = {
+	.name = MODULE_NAME,
+	.probe = pasemi_edac_probe,
+	.remove = pasemi_edac_remove,
+	.id_table = pasemi_edac_pci_tbl,
+};
+
+static int __init pasemi_edac_init(void)
+{
+       /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+       opstate_init();
+
+	return pci_register_driver(&pasemi_edac_driver);
+}
+
+static void __exit pasemi_edac_exit(void)
+{
+	pci_unregister_driver(&pasemi_edac_driver);
+}
+
+module_init(pasemi_edac_init);
+module_exit(pasemi_edac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>");
+MODULE_DESCRIPTION("MC support for PA Semi PWRficient memory controller");
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
+
diff --git a/drivers/edac/pnd2_edac.c b/drivers/edac/pnd2_edac.c
new file mode 100644
index 000000000..0153c7307
--- /dev/null
+++ b/drivers/edac/pnd2_edac.c
@@ -0,0 +1,1612 @@
+/*
+ * Driver for Pondicherry2 memory controller.
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * [Derived from sb_edac.c]
+ *
+ * Translation of system physical addresses to DIMM addresses
+ * is a two stage process:
+ *
+ * First the Pondicherry 2 memory controller handles slice and channel interleaving
+ * in "sys2pmi()". This is (almost) completley common between platforms.
+ *
+ * Then a platform specific dunit (DIMM unit) completes the process to provide DIMM,
+ * rank, bank, row and column using the appropriate "dunit_ops" functions/parameters.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/edac.h>
+#include <linux/mmzone.h>
+#include <linux/smp.h>
+#include <linux/bitmap.h>
+#include <linux/math64.h>
+#include <linux/mod_devicetable.h>
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+#include <asm/processor.h>
+#include <asm/mce.h>
+
+#include "edac_mc.h"
+#include "edac_module.h"
+#include "pnd2_edac.h"
+
+#define EDAC_MOD_STR		"pnd2_edac"
+
+#define APL_NUM_CHANNELS	4
+#define DNV_NUM_CHANNELS	2
+#define DNV_MAX_DIMMS		2 /* Max DIMMs per channel */
+
+enum type {
+	APL,
+	DNV, /* All requests go to PMI CH0 on each slice (CH1 disabled) */
+};
+
+struct dram_addr {
+	int chan;
+	int dimm;
+	int rank;
+	int bank;
+	int row;
+	int col;
+};
+
+struct pnd2_pvt {
+	int dimm_geom[APL_NUM_CHANNELS];
+	u64 tolm, tohm;
+};
+
+/*
+ * System address space is divided into multiple regions with
+ * different interleave rules in each. The as0/as1 regions
+ * have no interleaving at all. The as2 region is interleaved
+ * between two channels. The mot region is magic and may overlap
+ * other regions, with its interleave rules taking precedence.
+ * Addresses not in any of these regions are interleaved across
+ * all four channels.
+ */
+static struct region {
+	u64	base;
+	u64	limit;
+	u8	enabled;
+} mot, as0, as1, as2;
+
+static struct dunit_ops {
+	char *name;
+	enum type type;
+	int pmiaddr_shift;
+	int pmiidx_shift;
+	int channels;
+	int dimms_per_channel;
+	int (*rd_reg)(int port, int off, int op, void *data, size_t sz, char *name);
+	int (*get_registers)(void);
+	int (*check_ecc)(void);
+	void (*mk_region)(char *name, struct region *rp, void *asym);
+	void (*get_dimm_config)(struct mem_ctl_info *mci);
+	int (*pmi2mem)(struct mem_ctl_info *mci, u64 pmiaddr, u32 pmiidx,
+				   struct dram_addr *daddr, char *msg);
+} *ops;
+
+static struct mem_ctl_info *pnd2_mci;
+
+#define PND2_MSG_SIZE	256
+
+/* Debug macros */
+#define pnd2_printk(level, fmt, arg...)			\
+	edac_printk(level, "pnd2", fmt, ##arg)
+
+#define pnd2_mc_printk(mci, level, fmt, arg...)	\
+	edac_mc_chipset_printk(mci, level, "pnd2", fmt, ##arg)
+
+#define MOT_CHAN_INTLV_BIT_1SLC_2CH 12
+#define MOT_CHAN_INTLV_BIT_2SLC_2CH 13
+#define SELECTOR_DISABLED (-1)
+#define _4GB (1ul << 32)
+
+#define PMI_ADDRESS_WIDTH	31
+#define PND_MAX_PHYS_BIT	39
+
+#define APL_ASYMSHIFT		28
+#define DNV_ASYMSHIFT		31
+#define CH_HASH_MASK_LSB	6
+#define SLICE_HASH_MASK_LSB	6
+#define MOT_SLC_INTLV_BIT	12
+#define LOG2_PMI_ADDR_GRANULARITY	5
+#define MOT_SHIFT	24
+
+#define GET_BITFIELD(v, lo, hi)	(((v) & GENMASK_ULL(hi, lo)) >> (lo))
+#define U64_LSHIFT(val, s)	((u64)(val) << (s))
+
+/*
+ * On Apollo Lake we access memory controller registers via a
+ * side-band mailbox style interface in a hidden PCI device
+ * configuration space.
+ */
+static struct pci_bus	*p2sb_bus;
+#define P2SB_DEVFN	PCI_DEVFN(0xd, 0)
+#define P2SB_ADDR_OFF	0xd0
+#define P2SB_DATA_OFF	0xd4
+#define P2SB_STAT_OFF	0xd8
+#define P2SB_ROUT_OFF	0xda
+#define P2SB_EADD_OFF	0xdc
+#define P2SB_HIDE_OFF	0xe1
+
+#define P2SB_BUSY	1
+
+#define P2SB_READ(size, off, ptr) \
+	pci_bus_read_config_##size(p2sb_bus, P2SB_DEVFN, off, ptr)
+#define P2SB_WRITE(size, off, val) \
+	pci_bus_write_config_##size(p2sb_bus, P2SB_DEVFN, off, val)
+
+static bool p2sb_is_busy(u16 *status)
+{
+	P2SB_READ(word, P2SB_STAT_OFF, status);
+
+	return !!(*status & P2SB_BUSY);
+}
+
+static int _apl_rd_reg(int port, int off, int op, u32 *data)
+{
+	int retries = 0xff, ret;
+	u16 status;
+	u8 hidden;
+
+	/* Unhide the P2SB device, if it's hidden */
+	P2SB_READ(byte, P2SB_HIDE_OFF, &hidden);
+	if (hidden)
+		P2SB_WRITE(byte, P2SB_HIDE_OFF, 0);
+
+	if (p2sb_is_busy(&status)) {
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	P2SB_WRITE(dword, P2SB_ADDR_OFF, (port << 24) | off);
+	P2SB_WRITE(dword, P2SB_DATA_OFF, 0);
+	P2SB_WRITE(dword, P2SB_EADD_OFF, 0);
+	P2SB_WRITE(word, P2SB_ROUT_OFF, 0);
+	P2SB_WRITE(word, P2SB_STAT_OFF, (op << 8) | P2SB_BUSY);
+
+	while (p2sb_is_busy(&status)) {
+		if (retries-- == 0) {
+			ret = -EBUSY;
+			goto out;
+		}
+	}
+
+	P2SB_READ(dword, P2SB_DATA_OFF, data);
+	ret = (status >> 1) & 0x3;
+out:
+	/* Hide the P2SB device, if it was hidden before */
+	if (hidden)
+		P2SB_WRITE(byte, P2SB_HIDE_OFF, hidden);
+
+	return ret;
+}
+
+static int apl_rd_reg(int port, int off, int op, void *data, size_t sz, char *name)
+{
+	int ret = 0;
+
+	edac_dbg(2, "Read %s port=%x off=%x op=%x\n", name, port, off, op);
+	switch (sz) {
+	case 8:
+		ret = _apl_rd_reg(port, off + 4, op, (u32 *)(data + 4));
+		/* fall through */
+	case 4:
+		ret |= _apl_rd_reg(port, off, op, (u32 *)data);
+		pnd2_printk(KERN_DEBUG, "%s=%x%08x ret=%d\n", name,
+					sz == 8 ? *((u32 *)(data + 4)) : 0, *((u32 *)data), ret);
+		break;
+	}
+
+	return ret;
+}
+
+static u64 get_mem_ctrl_hub_base_addr(void)
+{
+	struct b_cr_mchbar_lo_pci lo;
+	struct b_cr_mchbar_hi_pci hi;
+	struct pci_dev *pdev;
+
+	pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x1980, NULL);
+	if (pdev) {
+		pci_read_config_dword(pdev, 0x48, (u32 *)&lo);
+		pci_read_config_dword(pdev, 0x4c, (u32 *)&hi);
+		pci_dev_put(pdev);
+	} else {
+		return 0;
+	}
+
+	if (!lo.enable) {
+		edac_dbg(2, "MMIO via memory controller hub base address is disabled!\n");
+		return 0;
+	}
+
+	return U64_LSHIFT(hi.base, 32) | U64_LSHIFT(lo.base, 15);
+}
+
+static u64 get_sideband_reg_base_addr(void)
+{
+	struct pci_dev *pdev;
+	u32 hi, lo;
+	u8 hidden;
+
+	pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x19dd, NULL);
+	if (pdev) {
+		/* Unhide the P2SB device, if it's hidden */
+		pci_read_config_byte(pdev, 0xe1, &hidden);
+		if (hidden)
+			pci_write_config_byte(pdev, 0xe1, 0);
+
+		pci_read_config_dword(pdev, 0x10, &lo);
+		pci_read_config_dword(pdev, 0x14, &hi);
+		lo &= 0xfffffff0;
+
+		/* Hide the P2SB device, if it was hidden before */
+		if (hidden)
+			pci_write_config_byte(pdev, 0xe1, hidden);
+
+		pci_dev_put(pdev);
+		return (U64_LSHIFT(hi, 32) | U64_LSHIFT(lo, 0));
+	} else {
+		return 0xfd000000;
+	}
+}
+
+#define DNV_MCHBAR_SIZE  0x8000
+#define DNV_SB_PORT_SIZE 0x10000
+static int dnv_rd_reg(int port, int off, int op, void *data, size_t sz, char *name)
+{
+	struct pci_dev *pdev;
+	char *base;
+	u64 addr;
+	unsigned long size;
+
+	if (op == 4) {
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x1980, NULL);
+		if (!pdev)
+			return -ENODEV;
+
+		pci_read_config_dword(pdev, off, data);
+		pci_dev_put(pdev);
+	} else {
+		/* MMIO via memory controller hub base address */
+		if (op == 0 && port == 0x4c) {
+			addr = get_mem_ctrl_hub_base_addr();
+			if (!addr)
+				return -ENODEV;
+			size = DNV_MCHBAR_SIZE;
+		} else {
+			/* MMIO via sideband register base address */
+			addr = get_sideband_reg_base_addr();
+			if (!addr)
+				return -ENODEV;
+			addr += (port << 16);
+			size = DNV_SB_PORT_SIZE;
+		}
+
+		base = ioremap((resource_size_t)addr, size);
+		if (!base)
+			return -ENODEV;
+
+		if (sz == 8)
+			*(u32 *)(data + 4) = *(u32 *)(base + off + 4);
+		*(u32 *)data = *(u32 *)(base + off);
+
+		iounmap(base);
+	}
+
+	edac_dbg(2, "Read %s=%.8x_%.8x\n", name,
+			(sz == 8) ? *(u32 *)(data + 4) : 0, *(u32 *)data);
+
+	return 0;
+}
+
+#define RD_REGP(regp, regname, port)	\
+	ops->rd_reg(port,					\
+		regname##_offset,				\
+		regname##_r_opcode,				\
+		regp, sizeof(struct regname),	\
+		#regname)
+
+#define RD_REG(regp, regname)			\
+	ops->rd_reg(regname ## _port,		\
+		regname##_offset,				\
+		regname##_r_opcode,				\
+		regp, sizeof(struct regname),	\
+		#regname)
+
+static u64 top_lm, top_hm;
+static bool two_slices;
+static bool two_channels; /* Both PMI channels in one slice enabled */
+
+static u8 sym_chan_mask;
+static u8 asym_chan_mask;
+static u8 chan_mask;
+
+static int slice_selector = -1;
+static int chan_selector = -1;
+static u64 slice_hash_mask;
+static u64 chan_hash_mask;
+
+static void mk_region(char *name, struct region *rp, u64 base, u64 limit)
+{
+	rp->enabled = 1;
+	rp->base = base;
+	rp->limit = limit;
+	edac_dbg(2, "Region:%s [%llx, %llx]\n", name, base, limit);
+}
+
+static void mk_region_mask(char *name, struct region *rp, u64 base, u64 mask)
+{
+	if (mask == 0) {
+		pr_info(FW_BUG "MOT mask cannot be zero\n");
+		return;
+	}
+	if (mask != GENMASK_ULL(PND_MAX_PHYS_BIT, __ffs(mask))) {
+		pr_info(FW_BUG "MOT mask not power of two\n");
+		return;
+	}
+	if (base & ~mask) {
+		pr_info(FW_BUG "MOT region base/mask alignment error\n");
+		return;
+	}
+	rp->base = base;
+	rp->limit = (base | ~mask) & GENMASK_ULL(PND_MAX_PHYS_BIT, 0);
+	rp->enabled = 1;
+	edac_dbg(2, "Region:%s [%llx, %llx]\n", name, base, rp->limit);
+}
+
+static bool in_region(struct region *rp, u64 addr)
+{
+	if (!rp->enabled)
+		return false;
+
+	return rp->base <= addr && addr <= rp->limit;
+}
+
+static int gen_sym_mask(struct b_cr_slice_channel_hash *p)
+{
+	int mask = 0;
+
+	if (!p->slice_0_mem_disabled)
+		mask |= p->sym_slice0_channel_enabled;
+
+	if (!p->slice_1_disabled)
+		mask |= p->sym_slice1_channel_enabled << 2;
+
+	if (p->ch_1_disabled || p->enable_pmi_dual_data_mode)
+		mask &= 0x5;
+
+	return mask;
+}
+
+static int gen_asym_mask(struct b_cr_slice_channel_hash *p,
+			 struct b_cr_asym_mem_region0_mchbar *as0,
+			 struct b_cr_asym_mem_region1_mchbar *as1,
+			 struct b_cr_asym_2way_mem_region_mchbar *as2way)
+{
+	const int intlv[] = { 0x5, 0xA, 0x3, 0xC };
+	int mask = 0;
+
+	if (as2way->asym_2way_interleave_enable)
+		mask = intlv[as2way->asym_2way_intlv_mode];
+	if (as0->slice0_asym_enable)
+		mask |= (1 << as0->slice0_asym_channel_select);
+	if (as1->slice1_asym_enable)
+		mask |= (4 << as1->slice1_asym_channel_select);
+	if (p->slice_0_mem_disabled)
+		mask &= 0xc;
+	if (p->slice_1_disabled)
+		mask &= 0x3;
+	if (p->ch_1_disabled || p->enable_pmi_dual_data_mode)
+		mask &= 0x5;
+
+	return mask;
+}
+
+static struct b_cr_tolud_pci tolud;
+static struct b_cr_touud_lo_pci touud_lo;
+static struct b_cr_touud_hi_pci touud_hi;
+static struct b_cr_asym_mem_region0_mchbar asym0;
+static struct b_cr_asym_mem_region1_mchbar asym1;
+static struct b_cr_asym_2way_mem_region_mchbar asym_2way;
+static struct b_cr_mot_out_base_mchbar mot_base;
+static struct b_cr_mot_out_mask_mchbar mot_mask;
+static struct b_cr_slice_channel_hash chash;
+
+/* Apollo Lake dunit */
+/*
+ * Validated on board with just two DIMMs in the [0] and [2] positions
+ * in this array. Other port number matches documentation, but caution
+ * advised.
+ */
+static const int apl_dports[APL_NUM_CHANNELS] = { 0x18, 0x10, 0x11, 0x19 };
+static struct d_cr_drp0 drp0[APL_NUM_CHANNELS];
+
+/* Denverton dunit */
+static const int dnv_dports[DNV_NUM_CHANNELS] = { 0x10, 0x12 };
+static struct d_cr_dsch dsch;
+static struct d_cr_ecc_ctrl ecc_ctrl[DNV_NUM_CHANNELS];
+static struct d_cr_drp drp[DNV_NUM_CHANNELS];
+static struct d_cr_dmap dmap[DNV_NUM_CHANNELS];
+static struct d_cr_dmap1 dmap1[DNV_NUM_CHANNELS];
+static struct d_cr_dmap2 dmap2[DNV_NUM_CHANNELS];
+static struct d_cr_dmap3 dmap3[DNV_NUM_CHANNELS];
+static struct d_cr_dmap4 dmap4[DNV_NUM_CHANNELS];
+static struct d_cr_dmap5 dmap5[DNV_NUM_CHANNELS];
+
+static void apl_mk_region(char *name, struct region *rp, void *asym)
+{
+	struct b_cr_asym_mem_region0_mchbar *a = asym;
+
+	mk_region(name, rp,
+			  U64_LSHIFT(a->slice0_asym_base, APL_ASYMSHIFT),
+			  U64_LSHIFT(a->slice0_asym_limit, APL_ASYMSHIFT) +
+			  GENMASK_ULL(APL_ASYMSHIFT - 1, 0));
+}
+
+static void dnv_mk_region(char *name, struct region *rp, void *asym)
+{
+	struct b_cr_asym_mem_region_denverton *a = asym;
+
+	mk_region(name, rp,
+			  U64_LSHIFT(a->slice_asym_base, DNV_ASYMSHIFT),
+			  U64_LSHIFT(a->slice_asym_limit, DNV_ASYMSHIFT) +
+			  GENMASK_ULL(DNV_ASYMSHIFT - 1, 0));
+}
+
+static int apl_get_registers(void)
+{
+	int ret = -ENODEV;
+	int i;
+
+	if (RD_REG(&asym_2way, b_cr_asym_2way_mem_region_mchbar))
+		return -ENODEV;
+
+	/*
+	 * RD_REGP() will fail for unpopulated or non-existent
+	 * DIMM slots. Return success if we find at least one DIMM.
+	 */
+	for (i = 0; i < APL_NUM_CHANNELS; i++)
+		if (!RD_REGP(&drp0[i], d_cr_drp0, apl_dports[i]))
+			ret = 0;
+
+	return ret;
+}
+
+static int dnv_get_registers(void)
+{
+	int i;
+
+	if (RD_REG(&dsch, d_cr_dsch))
+		return -ENODEV;
+
+	for (i = 0; i < DNV_NUM_CHANNELS; i++)
+		if (RD_REGP(&ecc_ctrl[i], d_cr_ecc_ctrl, dnv_dports[i]) ||
+			RD_REGP(&drp[i], d_cr_drp, dnv_dports[i]) ||
+			RD_REGP(&dmap[i], d_cr_dmap, dnv_dports[i]) ||
+			RD_REGP(&dmap1[i], d_cr_dmap1, dnv_dports[i]) ||
+			RD_REGP(&dmap2[i], d_cr_dmap2, dnv_dports[i]) ||
+			RD_REGP(&dmap3[i], d_cr_dmap3, dnv_dports[i]) ||
+			RD_REGP(&dmap4[i], d_cr_dmap4, dnv_dports[i]) ||
+			RD_REGP(&dmap5[i], d_cr_dmap5, dnv_dports[i]))
+			return -ENODEV;
+
+	return 0;
+}
+
+/*
+ * Read all the h/w config registers once here (they don't
+ * change at run time. Figure out which address ranges have
+ * which interleave characteristics.
+ */
+static int get_registers(void)
+{
+	const int intlv[] = { 10, 11, 12, 12 };
+
+	if (RD_REG(&tolud, b_cr_tolud_pci) ||
+		RD_REG(&touud_lo, b_cr_touud_lo_pci) ||
+		RD_REG(&touud_hi, b_cr_touud_hi_pci) ||
+		RD_REG(&asym0, b_cr_asym_mem_region0_mchbar) ||
+		RD_REG(&asym1, b_cr_asym_mem_region1_mchbar) ||
+		RD_REG(&mot_base, b_cr_mot_out_base_mchbar) ||
+		RD_REG(&mot_mask, b_cr_mot_out_mask_mchbar) ||
+		RD_REG(&chash, b_cr_slice_channel_hash))
+		return -ENODEV;
+
+	if (ops->get_registers())
+		return -ENODEV;
+
+	if (ops->type == DNV) {
+		/* PMI channel idx (always 0) for asymmetric region */
+		asym0.slice0_asym_channel_select = 0;
+		asym1.slice1_asym_channel_select = 0;
+		/* PMI channel bitmap (always 1) for symmetric region */
+		chash.sym_slice0_channel_enabled = 0x1;
+		chash.sym_slice1_channel_enabled = 0x1;
+	}
+
+	if (asym0.slice0_asym_enable)
+		ops->mk_region("as0", &as0, &asym0);
+
+	if (asym1.slice1_asym_enable)
+		ops->mk_region("as1", &as1, &asym1);
+
+	if (asym_2way.asym_2way_interleave_enable) {
+		mk_region("as2way", &as2,
+				  U64_LSHIFT(asym_2way.asym_2way_base, APL_ASYMSHIFT),
+				  U64_LSHIFT(asym_2way.asym_2way_limit, APL_ASYMSHIFT) +
+				  GENMASK_ULL(APL_ASYMSHIFT - 1, 0));
+	}
+
+	if (mot_base.imr_en) {
+		mk_region_mask("mot", &mot,
+					   U64_LSHIFT(mot_base.mot_out_base, MOT_SHIFT),
+					   U64_LSHIFT(mot_mask.mot_out_mask, MOT_SHIFT));
+	}
+
+	top_lm = U64_LSHIFT(tolud.tolud, 20);
+	top_hm = U64_LSHIFT(touud_hi.touud, 32) | U64_LSHIFT(touud_lo.touud, 20);
+
+	two_slices = !chash.slice_1_disabled &&
+				 !chash.slice_0_mem_disabled &&
+				 (chash.sym_slice0_channel_enabled != 0) &&
+				 (chash.sym_slice1_channel_enabled != 0);
+	two_channels = !chash.ch_1_disabled &&
+				 !chash.enable_pmi_dual_data_mode &&
+				 ((chash.sym_slice0_channel_enabled == 3) ||
+				 (chash.sym_slice1_channel_enabled == 3));
+
+	sym_chan_mask = gen_sym_mask(&chash);
+	asym_chan_mask = gen_asym_mask(&chash, &asym0, &asym1, &asym_2way);
+	chan_mask = sym_chan_mask | asym_chan_mask;
+
+	if (two_slices && !two_channels) {
+		if (chash.hvm_mode)
+			slice_selector = 29;
+		else
+			slice_selector = intlv[chash.interleave_mode];
+	} else if (!two_slices && two_channels) {
+		if (chash.hvm_mode)
+			chan_selector = 29;
+		else
+			chan_selector = intlv[chash.interleave_mode];
+	} else if (two_slices && two_channels) {
+		if (chash.hvm_mode) {
+			slice_selector = 29;
+			chan_selector = 30;
+		} else {
+			slice_selector = intlv[chash.interleave_mode];
+			chan_selector = intlv[chash.interleave_mode] + 1;
+		}
+	}
+
+	if (two_slices) {
+		if (!chash.hvm_mode)
+			slice_hash_mask = chash.slice_hash_mask << SLICE_HASH_MASK_LSB;
+		if (!two_channels)
+			slice_hash_mask |= BIT_ULL(slice_selector);
+	}
+
+	if (two_channels) {
+		if (!chash.hvm_mode)
+			chan_hash_mask = chash.ch_hash_mask << CH_HASH_MASK_LSB;
+		if (!two_slices)
+			chan_hash_mask |= BIT_ULL(chan_selector);
+	}
+
+	return 0;
+}
+
+/* Get a contiguous memory address (remove the MMIO gap) */
+static u64 remove_mmio_gap(u64 sys)
+{
+	return (sys < _4GB) ? sys : sys - (_4GB - top_lm);
+}
+
+/* Squeeze out one address bit, shift upper part down to fill gap */
+static void remove_addr_bit(u64 *addr, int bitidx)
+{
+	u64	mask;
+
+	if (bitidx == -1)
+		return;
+
+	mask = (1ull << bitidx) - 1;
+	*addr = ((*addr >> 1) & ~mask) | (*addr & mask);
+}
+
+/* XOR all the bits from addr specified in mask */
+static int hash_by_mask(u64 addr, u64 mask)
+{
+	u64 result = addr & mask;
+
+	result = (result >> 32) ^ result;
+	result = (result >> 16) ^ result;
+	result = (result >> 8) ^ result;
+	result = (result >> 4) ^ result;
+	result = (result >> 2) ^ result;
+	result = (result >> 1) ^ result;
+
+	return (int)result & 1;
+}
+
+/*
+ * First stage decode. Take the system address and figure out which
+ * second stage will deal with it based on interleave modes.
+ */
+static int sys2pmi(const u64 addr, u32 *pmiidx, u64 *pmiaddr, char *msg)
+{
+	u64 contig_addr, contig_base, contig_offset, contig_base_adj;
+	int mot_intlv_bit = two_slices ? MOT_CHAN_INTLV_BIT_2SLC_2CH :
+						MOT_CHAN_INTLV_BIT_1SLC_2CH;
+	int slice_intlv_bit_rm = SELECTOR_DISABLED;
+	int chan_intlv_bit_rm = SELECTOR_DISABLED;
+	/* Determine if address is in the MOT region. */
+	bool mot_hit = in_region(&mot, addr);
+	/* Calculate the number of symmetric regions enabled. */
+	int sym_channels = hweight8(sym_chan_mask);
+
+	/*
+	 * The amount we need to shift the asym base can be determined by the
+	 * number of enabled symmetric channels.
+	 * NOTE: This can only work because symmetric memory is not supposed
+	 * to do a 3-way interleave.
+	 */
+	int sym_chan_shift = sym_channels >> 1;
+
+	/* Give up if address is out of range, or in MMIO gap */
+	if (addr >= (1ul << PND_MAX_PHYS_BIT) ||
+	   (addr >= top_lm && addr < _4GB) || addr >= top_hm) {
+		snprintf(msg, PND2_MSG_SIZE, "Error address 0x%llx is not DRAM", addr);
+		return -EINVAL;
+	}
+
+	/* Get a contiguous memory address (remove the MMIO gap) */
+	contig_addr = remove_mmio_gap(addr);
+
+	if (in_region(&as0, addr)) {
+		*pmiidx = asym0.slice0_asym_channel_select;
+
+		contig_base = remove_mmio_gap(as0.base);
+		contig_offset = contig_addr - contig_base;
+		contig_base_adj = (contig_base >> sym_chan_shift) *
+						  ((chash.sym_slice0_channel_enabled >> (*pmiidx & 1)) & 1);
+		contig_addr = contig_offset + ((sym_channels > 0) ? contig_base_adj : 0ull);
+	} else if (in_region(&as1, addr)) {
+		*pmiidx = 2u + asym1.slice1_asym_channel_select;
+
+		contig_base = remove_mmio_gap(as1.base);
+		contig_offset = contig_addr - contig_base;
+		contig_base_adj = (contig_base >> sym_chan_shift) *
+						  ((chash.sym_slice1_channel_enabled >> (*pmiidx & 1)) & 1);
+		contig_addr = contig_offset + ((sym_channels > 0) ? contig_base_adj : 0ull);
+	} else if (in_region(&as2, addr) && (asym_2way.asym_2way_intlv_mode == 0x3ul)) {
+		bool channel1;
+
+		mot_intlv_bit = MOT_CHAN_INTLV_BIT_1SLC_2CH;
+		*pmiidx = (asym_2way.asym_2way_intlv_mode & 1) << 1;
+		channel1 = mot_hit ? ((bool)((addr >> mot_intlv_bit) & 1)) :
+			hash_by_mask(contig_addr, chan_hash_mask);
+		*pmiidx |= (u32)channel1;
+
+		contig_base = remove_mmio_gap(as2.base);
+		chan_intlv_bit_rm = mot_hit ? mot_intlv_bit : chan_selector;
+		contig_offset = contig_addr - contig_base;
+		remove_addr_bit(&contig_offset, chan_intlv_bit_rm);
+		contig_addr = (contig_base >> sym_chan_shift) + contig_offset;
+	} else {
+		/* Otherwise we're in normal, boring symmetric mode. */
+		*pmiidx = 0u;
+
+		if (two_slices) {
+			bool slice1;
+
+			if (mot_hit) {
+				slice_intlv_bit_rm = MOT_SLC_INTLV_BIT;
+				slice1 = (addr >> MOT_SLC_INTLV_BIT) & 1;
+			} else {
+				slice_intlv_bit_rm = slice_selector;
+				slice1 = hash_by_mask(addr, slice_hash_mask);
+			}
+
+			*pmiidx = (u32)slice1 << 1;
+		}
+
+		if (two_channels) {
+			bool channel1;
+
+			mot_intlv_bit = two_slices ? MOT_CHAN_INTLV_BIT_2SLC_2CH :
+							MOT_CHAN_INTLV_BIT_1SLC_2CH;
+
+			if (mot_hit) {
+				chan_intlv_bit_rm = mot_intlv_bit;
+				channel1 = (addr >> mot_intlv_bit) & 1;
+			} else {
+				chan_intlv_bit_rm = chan_selector;
+				channel1 = hash_by_mask(contig_addr, chan_hash_mask);
+			}
+
+			*pmiidx |= (u32)channel1;
+		}
+	}
+
+	/* Remove the chan_selector bit first */
+	remove_addr_bit(&contig_addr, chan_intlv_bit_rm);
+	/* Remove the slice bit (we remove it second because it must be lower */
+	remove_addr_bit(&contig_addr, slice_intlv_bit_rm);
+	*pmiaddr = contig_addr;
+
+	return 0;
+}
+
+/* Translate PMI address to memory (rank, row, bank, column) */
+#define C(n) (0x10 | (n))	/* column */
+#define B(n) (0x20 | (n))	/* bank */
+#define R(n) (0x40 | (n))	/* row */
+#define RS   (0x80)			/* rank */
+
+/* addrdec values */
+#define AMAP_1KB	0
+#define AMAP_2KB	1
+#define AMAP_4KB	2
+#define AMAP_RSVD	3
+
+/* dden values */
+#define DEN_4Gb		0
+#define DEN_8Gb		2
+
+/* dwid values */
+#define X8		0
+#define X16		1
+
+static struct dimm_geometry {
+	u8	addrdec;
+	u8	dden;
+	u8	dwid;
+	u8	rowbits, colbits;
+	u16	bits[PMI_ADDRESS_WIDTH];
+} dimms[] = {
+	{
+		.addrdec = AMAP_1KB, .dden = DEN_4Gb, .dwid = X16,
+		.rowbits = 15, .colbits = 10,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  B(0),  B(1),  B(2),  R(0),
+			R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),  R(8),  R(9),
+			R(10), C(7),  C(8),  C(9),  R(11), RS,    R(12), R(13), R(14),
+			0,     0,     0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_1KB, .dden = DEN_4Gb, .dwid = X8,
+		.rowbits = 16, .colbits = 10,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  B(0),  B(1),  B(2),  R(0),
+			R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),  R(8),  R(9),
+			R(10), C(7),  C(8),  C(9),  R(11), RS,    R(12), R(13), R(14),
+			R(15), 0,     0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_1KB, .dden = DEN_8Gb, .dwid = X16,
+		.rowbits = 16, .colbits = 10,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  B(0),  B(1),  B(2),  R(0),
+			R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),  R(8),  R(9),
+			R(10), C(7),  C(8),  C(9),  R(11), RS,    R(12), R(13), R(14),
+			R(15), 0,     0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_1KB, .dden = DEN_8Gb, .dwid = X8,
+		.rowbits = 16, .colbits = 11,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  B(0),  B(1),  B(2),  R(0),
+			R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),  R(8),  R(9),
+			R(10), C(7),  C(8),  C(9),  R(11), RS,    C(11), R(12), R(13),
+			R(14), R(15), 0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_2KB, .dden = DEN_4Gb, .dwid = X16,
+		.rowbits = 15, .colbits = 10,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  C(7),  B(0),  B(1),  B(2),
+			R(0),  R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),  R(8),
+			R(9),  R(10), C(8),  C(9),  R(11), RS,    R(12), R(13), R(14),
+			0,     0,     0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_2KB, .dden = DEN_4Gb, .dwid = X8,
+		.rowbits = 16, .colbits = 10,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  C(7),  B(0),  B(1),  B(2),
+			R(0),  R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),  R(8),
+			R(9),  R(10), C(8),  C(9),  R(11), RS,    R(12), R(13), R(14),
+			R(15), 0,     0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_2KB, .dden = DEN_8Gb, .dwid = X16,
+		.rowbits = 16, .colbits = 10,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  C(7),  B(0),  B(1),  B(2),
+			R(0),  R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),  R(8),
+			R(9),  R(10), C(8),  C(9),  R(11), RS,    R(12), R(13), R(14),
+			R(15), 0,     0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_2KB, .dden = DEN_8Gb, .dwid = X8,
+		.rowbits = 16, .colbits = 11,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  C(7),  B(0),  B(1),  B(2),
+			R(0),  R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),  R(8),
+			R(9),  R(10), C(8),  C(9),  R(11), RS,    C(11), R(12), R(13),
+			R(14), R(15), 0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_4KB, .dden = DEN_4Gb, .dwid = X16,
+		.rowbits = 15, .colbits = 10,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  C(7),  C(8),  B(0),  B(1),
+			B(2),  R(0),  R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),
+			R(8),  R(9),  R(10), C(9),  R(11), RS,    R(12), R(13), R(14),
+			0,     0,     0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_4KB, .dden = DEN_4Gb, .dwid = X8,
+		.rowbits = 16, .colbits = 10,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  C(7),  C(8),  B(0),  B(1),
+			B(2),  R(0),  R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),
+			R(8),  R(9),  R(10), C(9),  R(11), RS,    R(12), R(13), R(14),
+			R(15), 0,     0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_4KB, .dden = DEN_8Gb, .dwid = X16,
+		.rowbits = 16, .colbits = 10,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  C(7),  C(8),  B(0),  B(1),
+			B(2),  R(0),  R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),
+			R(8),  R(9),  R(10), C(9),  R(11), RS,    R(12), R(13), R(14),
+			R(15), 0,     0,     0
+		}
+	},
+	{
+		.addrdec = AMAP_4KB, .dden = DEN_8Gb, .dwid = X8,
+		.rowbits = 16, .colbits = 11,
+		.bits = {
+			C(2),  C(3),  C(4),  C(5),  C(6),  C(7),  C(8),  B(0),  B(1),
+			B(2),  R(0),  R(1),  R(2),  R(3),  R(4),  R(5),  R(6),  R(7),
+			R(8),  R(9),  R(10), C(9),  R(11), RS,    C(11), R(12), R(13),
+			R(14), R(15), 0,     0
+		}
+	}
+};
+
+static int bank_hash(u64 pmiaddr, int idx, int shft)
+{
+	int bhash = 0;
+
+	switch (idx) {
+	case 0:
+		bhash ^= ((pmiaddr >> (12 + shft)) ^ (pmiaddr >> (9 + shft))) & 1;
+		break;
+	case 1:
+		bhash ^= (((pmiaddr >> (10 + shft)) ^ (pmiaddr >> (8 + shft))) & 1) << 1;
+		bhash ^= ((pmiaddr >> 22) & 1) << 1;
+		break;
+	case 2:
+		bhash ^= (((pmiaddr >> (13 + shft)) ^ (pmiaddr >> (11 + shft))) & 1) << 2;
+		break;
+	}
+
+	return bhash;
+}
+
+static int rank_hash(u64 pmiaddr)
+{
+	return ((pmiaddr >> 16) ^ (pmiaddr >> 10)) & 1;
+}
+
+/* Second stage decode. Compute rank, bank, row & column. */
+static int apl_pmi2mem(struct mem_ctl_info *mci, u64 pmiaddr, u32 pmiidx,
+		       struct dram_addr *daddr, char *msg)
+{
+	struct d_cr_drp0 *cr_drp0 = &drp0[pmiidx];
+	struct pnd2_pvt *pvt = mci->pvt_info;
+	int g = pvt->dimm_geom[pmiidx];
+	struct dimm_geometry *d = &dimms[g];
+	int column = 0, bank = 0, row = 0, rank = 0;
+	int i, idx, type, skiprs = 0;
+
+	for (i = 0; i < PMI_ADDRESS_WIDTH; i++) {
+		int	bit = (pmiaddr >> i) & 1;
+
+		if (i + skiprs >= PMI_ADDRESS_WIDTH) {
+			snprintf(msg, PND2_MSG_SIZE, "Bad dimm_geometry[] table\n");
+			return -EINVAL;
+		}
+
+		type = d->bits[i + skiprs] & ~0xf;
+		idx = d->bits[i + skiprs] & 0xf;
+
+		/*
+		 * On single rank DIMMs ignore the rank select bit
+		 * and shift remainder of "bits[]" down one place.
+		 */
+		if (type == RS && (cr_drp0->rken0 + cr_drp0->rken1) == 1) {
+			skiprs = 1;
+			type = d->bits[i + skiprs] & ~0xf;
+			idx = d->bits[i + skiprs] & 0xf;
+		}
+
+		switch (type) {
+		case C(0):
+			column |= (bit << idx);
+			break;
+		case B(0):
+			bank |= (bit << idx);
+			if (cr_drp0->bahen)
+				bank ^= bank_hash(pmiaddr, idx, d->addrdec);
+			break;
+		case R(0):
+			row |= (bit << idx);
+			break;
+		case RS:
+			rank = bit;
+			if (cr_drp0->rsien)
+				rank ^= rank_hash(pmiaddr);
+			break;
+		default:
+			if (bit) {
+				snprintf(msg, PND2_MSG_SIZE, "Bad translation\n");
+				return -EINVAL;
+			}
+			goto done;
+		}
+	}
+
+done:
+	daddr->col = column;
+	daddr->bank = bank;
+	daddr->row = row;
+	daddr->rank = rank;
+	daddr->dimm = 0;
+
+	return 0;
+}
+
+/* Pluck bit "in" from pmiaddr and return value shifted to bit "out" */
+#define dnv_get_bit(pmi, in, out) ((int)(((pmi) >> (in)) & 1u) << (out))
+
+static int dnv_pmi2mem(struct mem_ctl_info *mci, u64 pmiaddr, u32 pmiidx,
+					   struct dram_addr *daddr, char *msg)
+{
+	/* Rank 0 or 1 */
+	daddr->rank = dnv_get_bit(pmiaddr, dmap[pmiidx].rs0 + 13, 0);
+	/* Rank 2 or 3 */
+	daddr->rank |= dnv_get_bit(pmiaddr, dmap[pmiidx].rs1 + 13, 1);
+
+	/*
+	 * Normally ranks 0,1 are DIMM0, and 2,3 are DIMM1, but we
+	 * flip them if DIMM1 is larger than DIMM0.
+	 */
+	daddr->dimm = (daddr->rank >= 2) ^ drp[pmiidx].dimmflip;
+
+	daddr->bank = dnv_get_bit(pmiaddr, dmap[pmiidx].ba0 + 6, 0);
+	daddr->bank |= dnv_get_bit(pmiaddr, dmap[pmiidx].ba1 + 6, 1);
+	daddr->bank |= dnv_get_bit(pmiaddr, dmap[pmiidx].bg0 + 6, 2);
+	if (dsch.ddr4en)
+		daddr->bank |= dnv_get_bit(pmiaddr, dmap[pmiidx].bg1 + 6, 3);
+	if (dmap1[pmiidx].bxor) {
+		if (dsch.ddr4en) {
+			daddr->bank ^= dnv_get_bit(pmiaddr, dmap3[pmiidx].row6 + 6, 0);
+			daddr->bank ^= dnv_get_bit(pmiaddr, dmap3[pmiidx].row7 + 6, 1);
+			if (dsch.chan_width == 0)
+				/* 64/72 bit dram channel width */
+				daddr->bank ^= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca3 + 6, 2);
+			else
+				/* 32/40 bit dram channel width */
+				daddr->bank ^= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca4 + 6, 2);
+			daddr->bank ^= dnv_get_bit(pmiaddr, dmap2[pmiidx].row2 + 6, 3);
+		} else {
+			daddr->bank ^= dnv_get_bit(pmiaddr, dmap2[pmiidx].row2 + 6, 0);
+			daddr->bank ^= dnv_get_bit(pmiaddr, dmap3[pmiidx].row6 + 6, 1);
+			if (dsch.chan_width == 0)
+				daddr->bank ^= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca3 + 6, 2);
+			else
+				daddr->bank ^= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca4 + 6, 2);
+		}
+	}
+
+	daddr->row = dnv_get_bit(pmiaddr, dmap2[pmiidx].row0 + 6, 0);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap2[pmiidx].row1 + 6, 1);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap2[pmiidx].row2 + 6, 2);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap2[pmiidx].row3 + 6, 3);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap2[pmiidx].row4 + 6, 4);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap2[pmiidx].row5 + 6, 5);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap3[pmiidx].row6 + 6, 6);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap3[pmiidx].row7 + 6, 7);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap3[pmiidx].row8 + 6, 8);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap3[pmiidx].row9 + 6, 9);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap3[pmiidx].row10 + 6, 10);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap3[pmiidx].row11 + 6, 11);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap4[pmiidx].row12 + 6, 12);
+	daddr->row |= dnv_get_bit(pmiaddr, dmap4[pmiidx].row13 + 6, 13);
+	if (dmap4[pmiidx].row14 != 31)
+		daddr->row |= dnv_get_bit(pmiaddr, dmap4[pmiidx].row14 + 6, 14);
+	if (dmap4[pmiidx].row15 != 31)
+		daddr->row |= dnv_get_bit(pmiaddr, dmap4[pmiidx].row15 + 6, 15);
+	if (dmap4[pmiidx].row16 != 31)
+		daddr->row |= dnv_get_bit(pmiaddr, dmap4[pmiidx].row16 + 6, 16);
+	if (dmap4[pmiidx].row17 != 31)
+		daddr->row |= dnv_get_bit(pmiaddr, dmap4[pmiidx].row17 + 6, 17);
+
+	daddr->col = dnv_get_bit(pmiaddr, dmap5[pmiidx].ca3 + 6, 3);
+	daddr->col |= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca4 + 6, 4);
+	daddr->col |= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca5 + 6, 5);
+	daddr->col |= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca6 + 6, 6);
+	daddr->col |= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca7 + 6, 7);
+	daddr->col |= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca8 + 6, 8);
+	daddr->col |= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca9 + 6, 9);
+	if (!dsch.ddr4en && dmap1[pmiidx].ca11 != 0x3f)
+		daddr->col |= dnv_get_bit(pmiaddr, dmap1[pmiidx].ca11 + 13, 11);
+
+	return 0;
+}
+
+static int check_channel(int ch)
+{
+	if (drp0[ch].dramtype != 0) {
+		pnd2_printk(KERN_INFO, "Unsupported DIMM in channel %d\n", ch);
+		return 1;
+	} else if (drp0[ch].eccen == 0) {
+		pnd2_printk(KERN_INFO, "ECC disabled on channel %d\n", ch);
+		return 1;
+	}
+	return 0;
+}
+
+static int apl_check_ecc_active(void)
+{
+	int	i, ret = 0;
+
+	/* Check dramtype and ECC mode for each present DIMM */
+	for (i = 0; i < APL_NUM_CHANNELS; i++)
+		if (chan_mask & BIT(i))
+			ret += check_channel(i);
+	return ret ? -EINVAL : 0;
+}
+
+#define DIMMS_PRESENT(d) ((d)->rken0 + (d)->rken1 + (d)->rken2 + (d)->rken3)
+
+static int check_unit(int ch)
+{
+	struct d_cr_drp *d = &drp[ch];
+
+	if (DIMMS_PRESENT(d) && !ecc_ctrl[ch].eccen) {
+		pnd2_printk(KERN_INFO, "ECC disabled on channel %d\n", ch);
+		return 1;
+	}
+	return 0;
+}
+
+static int dnv_check_ecc_active(void)
+{
+	int	i, ret = 0;
+
+	for (i = 0; i < DNV_NUM_CHANNELS; i++)
+		ret += check_unit(i);
+	return ret ? -EINVAL : 0;
+}
+
+static int get_memory_error_data(struct mem_ctl_info *mci, u64 addr,
+								 struct dram_addr *daddr, char *msg)
+{
+	u64	pmiaddr;
+	u32	pmiidx;
+	int	ret;
+
+	ret = sys2pmi(addr, &pmiidx, &pmiaddr, msg);
+	if (ret)
+		return ret;
+
+	pmiaddr >>= ops->pmiaddr_shift;
+	/* pmi channel idx to dimm channel idx */
+	pmiidx >>= ops->pmiidx_shift;
+	daddr->chan = pmiidx;
+
+	ret = ops->pmi2mem(mci, pmiaddr, pmiidx, daddr, msg);
+	if (ret)
+		return ret;
+
+	edac_dbg(0, "SysAddr=%llx PmiAddr=%llx Channel=%d DIMM=%d Rank=%d Bank=%d Row=%d Column=%d\n",
+			 addr, pmiaddr, daddr->chan, daddr->dimm, daddr->rank, daddr->bank, daddr->row, daddr->col);
+
+	return 0;
+}
+
+static void pnd2_mce_output_error(struct mem_ctl_info *mci, const struct mce *m,
+				  struct dram_addr *daddr)
+{
+	enum hw_event_mc_err_type tp_event;
+	char *optype, msg[PND2_MSG_SIZE];
+	bool ripv = m->mcgstatus & MCG_STATUS_RIPV;
+	bool overflow = m->status & MCI_STATUS_OVER;
+	bool uc_err = m->status & MCI_STATUS_UC;
+	bool recov = m->status & MCI_STATUS_S;
+	u32 core_err_cnt = GET_BITFIELD(m->status, 38, 52);
+	u32 mscod = GET_BITFIELD(m->status, 16, 31);
+	u32 errcode = GET_BITFIELD(m->status, 0, 15);
+	u32 optypenum = GET_BITFIELD(m->status, 4, 6);
+	int rc;
+
+	tp_event = uc_err ? (ripv ? HW_EVENT_ERR_FATAL : HW_EVENT_ERR_UNCORRECTED) :
+						 HW_EVENT_ERR_CORRECTED;
+
+	/*
+	 * According with Table 15-9 of the Intel Architecture spec vol 3A,
+	 * memory errors should fit in this mask:
+	 *	000f 0000 1mmm cccc (binary)
+	 * where:
+	 *	f = Correction Report Filtering Bit. If 1, subsequent errors
+	 *	    won't be shown
+	 *	mmm = error type
+	 *	cccc = channel
+	 * If the mask doesn't match, report an error to the parsing logic
+	 */
+	if (!((errcode & 0xef80) == 0x80)) {
+		optype = "Can't parse: it is not a mem";
+	} else {
+		switch (optypenum) {
+		case 0:
+			optype = "generic undef request error";
+			break;
+		case 1:
+			optype = "memory read error";
+			break;
+		case 2:
+			optype = "memory write error";
+			break;
+		case 3:
+			optype = "addr/cmd error";
+			break;
+		case 4:
+			optype = "memory scrubbing error";
+			break;
+		default:
+			optype = "reserved";
+			break;
+		}
+	}
+
+	/* Only decode errors with an valid address (ADDRV) */
+	if (!(m->status & MCI_STATUS_ADDRV))
+		return;
+
+	rc = get_memory_error_data(mci, m->addr, daddr, msg);
+	if (rc)
+		goto address_error;
+
+	snprintf(msg, sizeof(msg),
+		 "%s%s err_code:%04x:%04x channel:%d DIMM:%d rank:%d row:%d bank:%d col:%d",
+		 overflow ? " OVERFLOW" : "", (uc_err && recov) ? " recoverable" : "", mscod,
+		 errcode, daddr->chan, daddr->dimm, daddr->rank, daddr->row, daddr->bank, daddr->col);
+
+	edac_dbg(0, "%s\n", msg);
+
+	/* Call the helper to output message */
+	edac_mc_handle_error(tp_event, mci, core_err_cnt, m->addr >> PAGE_SHIFT,
+						 m->addr & ~PAGE_MASK, 0, daddr->chan, daddr->dimm, -1, optype, msg);
+
+	return;
+
+address_error:
+	edac_mc_handle_error(tp_event, mci, core_err_cnt, 0, 0, 0, -1, -1, -1, msg, "");
+}
+
+static void apl_get_dimm_config(struct mem_ctl_info *mci)
+{
+	struct pnd2_pvt	*pvt = mci->pvt_info;
+	struct dimm_info *dimm;
+	struct d_cr_drp0 *d;
+	u64	capacity;
+	int	i, g;
+
+	for (i = 0; i < APL_NUM_CHANNELS; i++) {
+		if (!(chan_mask & BIT(i)))
+			continue;
+
+		dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, i, 0, 0);
+		if (!dimm) {
+			edac_dbg(0, "No allocated DIMM for channel %d\n", i);
+			continue;
+		}
+
+		d = &drp0[i];
+		for (g = 0; g < ARRAY_SIZE(dimms); g++)
+			if (dimms[g].addrdec == d->addrdec &&
+			    dimms[g].dden == d->dden &&
+			    dimms[g].dwid == d->dwid)
+				break;
+
+		if (g == ARRAY_SIZE(dimms)) {
+			edac_dbg(0, "Channel %d: unrecognized DIMM\n", i);
+			continue;
+		}
+
+		pvt->dimm_geom[i] = g;
+		capacity = (d->rken0 + d->rken1) * 8 * (1ul << dimms[g].rowbits) *
+				   (1ul << dimms[g].colbits);
+		edac_dbg(0, "Channel %d: %lld MByte DIMM\n", i, capacity >> (20 - 3));
+		dimm->nr_pages = MiB_TO_PAGES(capacity >> (20 - 3));
+		dimm->grain = 32;
+		dimm->dtype = (d->dwid == 0) ? DEV_X8 : DEV_X16;
+		dimm->mtype = MEM_DDR3;
+		dimm->edac_mode = EDAC_SECDED;
+		snprintf(dimm->label, sizeof(dimm->label), "Slice#%d_Chan#%d", i / 2, i % 2);
+	}
+}
+
+static const int dnv_dtypes[] = {
+	DEV_X8, DEV_X4, DEV_X16, DEV_UNKNOWN
+};
+
+static void dnv_get_dimm_config(struct mem_ctl_info *mci)
+{
+	int	i, j, ranks_of_dimm[DNV_MAX_DIMMS], banks, rowbits, colbits, memtype;
+	struct dimm_info *dimm;
+	struct d_cr_drp *d;
+	u64	capacity;
+
+	if (dsch.ddr4en) {
+		memtype = MEM_DDR4;
+		banks = 16;
+		colbits = 10;
+	} else {
+		memtype = MEM_DDR3;
+		banks = 8;
+	}
+
+	for (i = 0; i < DNV_NUM_CHANNELS; i++) {
+		if (dmap4[i].row14 == 31)
+			rowbits = 14;
+		else if (dmap4[i].row15 == 31)
+			rowbits = 15;
+		else if (dmap4[i].row16 == 31)
+			rowbits = 16;
+		else if (dmap4[i].row17 == 31)
+			rowbits = 17;
+		else
+			rowbits = 18;
+
+		if (memtype == MEM_DDR3) {
+			if (dmap1[i].ca11 != 0x3f)
+				colbits = 12;
+			else
+				colbits = 10;
+		}
+
+		d = &drp[i];
+		/* DIMM0 is present if rank0 and/or rank1 is enabled */
+		ranks_of_dimm[0] = d->rken0 + d->rken1;
+		/* DIMM1 is present if rank2 and/or rank3 is enabled */
+		ranks_of_dimm[1] = d->rken2 + d->rken3;
+
+		for (j = 0; j < DNV_MAX_DIMMS; j++) {
+			if (!ranks_of_dimm[j])
+				continue;
+
+			dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, i, j, 0);
+			if (!dimm) {
+				edac_dbg(0, "No allocated DIMM for channel %d DIMM %d\n", i, j);
+				continue;
+			}
+
+			capacity = ranks_of_dimm[j] * banks * (1ul << rowbits) * (1ul << colbits);
+			edac_dbg(0, "Channel %d DIMM %d: %lld MByte DIMM\n", i, j, capacity >> (20 - 3));
+			dimm->nr_pages = MiB_TO_PAGES(capacity >> (20 - 3));
+			dimm->grain = 32;
+			dimm->dtype = dnv_dtypes[j ? d->dimmdwid0 : d->dimmdwid1];
+			dimm->mtype = memtype;
+			dimm->edac_mode = EDAC_SECDED;
+			snprintf(dimm->label, sizeof(dimm->label), "Chan#%d_DIMM#%d", i, j);
+		}
+	}
+}
+
+static int pnd2_register_mci(struct mem_ctl_info **ppmci)
+{
+	struct edac_mc_layer layers[2];
+	struct mem_ctl_info *mci;
+	struct pnd2_pvt *pvt;
+	int rc;
+
+	rc = ops->check_ecc();
+	if (rc < 0)
+		return rc;
+
+	/* Allocate a new MC control structure */
+	layers[0].type = EDAC_MC_LAYER_CHANNEL;
+	layers[0].size = ops->channels;
+	layers[0].is_virt_csrow = false;
+	layers[1].type = EDAC_MC_LAYER_SLOT;
+	layers[1].size = ops->dimms_per_channel;
+	layers[1].is_virt_csrow = true;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt));
+	if (!mci)
+		return -ENOMEM;
+
+	pvt = mci->pvt_info;
+	memset(pvt, 0, sizeof(*pvt));
+
+	mci->mod_name = EDAC_MOD_STR;
+	mci->dev_name = ops->name;
+	mci->ctl_name = "Pondicherry2";
+
+	/* Get dimm basic config and the memory layout */
+	ops->get_dimm_config(mci);
+
+	if (edac_mc_add_mc(mci)) {
+		edac_dbg(0, "MC: failed edac_mc_add_mc()\n");
+		edac_mc_free(mci);
+		return -EINVAL;
+	}
+
+	*ppmci = mci;
+
+	return 0;
+}
+
+static void pnd2_unregister_mci(struct mem_ctl_info *mci)
+{
+	if (unlikely(!mci || !mci->pvt_info)) {
+		pnd2_printk(KERN_ERR, "Couldn't find mci handler\n");
+		return;
+	}
+
+	/* Remove MC sysfs nodes */
+	edac_mc_del_mc(NULL);
+	edac_dbg(1, "%s: free mci struct\n", mci->ctl_name);
+	edac_mc_free(mci);
+}
+
+/*
+ * Callback function registered with core kernel mce code.
+ * Called once for each logged error.
+ */
+static int pnd2_mce_check_error(struct notifier_block *nb, unsigned long val, void *data)
+{
+	struct mce *mce = (struct mce *)data;
+	struct mem_ctl_info *mci;
+	struct dram_addr daddr;
+	char *type;
+
+	if (edac_get_report_status() == EDAC_REPORTING_DISABLED)
+		return NOTIFY_DONE;
+
+	mci = pnd2_mci;
+	if (!mci)
+		return NOTIFY_DONE;
+
+	/*
+	 * Just let mcelog handle it if the error is
+	 * outside the memory controller. A memory error
+	 * is indicated by bit 7 = 1 and bits = 8-11,13-15 = 0.
+	 * bit 12 has an special meaning.
+	 */
+	if ((mce->status & 0xefff) >> 7 != 1)
+		return NOTIFY_DONE;
+
+	if (mce->mcgstatus & MCG_STATUS_MCIP)
+		type = "Exception";
+	else
+		type = "Event";
+
+	pnd2_mc_printk(mci, KERN_INFO, "HANDLING MCE MEMORY ERROR\n");
+	pnd2_mc_printk(mci, KERN_INFO, "CPU %u: Machine Check %s: %llx Bank %u: %llx\n",
+				   mce->extcpu, type, mce->mcgstatus, mce->bank, mce->status);
+	pnd2_mc_printk(mci, KERN_INFO, "TSC %llx ", mce->tsc);
+	pnd2_mc_printk(mci, KERN_INFO, "ADDR %llx ", mce->addr);
+	pnd2_mc_printk(mci, KERN_INFO, "MISC %llx ", mce->misc);
+	pnd2_mc_printk(mci, KERN_INFO, "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
+				   mce->cpuvendor, mce->cpuid, mce->time, mce->socketid, mce->apicid);
+
+	pnd2_mce_output_error(mci, mce, &daddr);
+
+	/* Advice mcelog that the error were handled */
+	return NOTIFY_STOP;
+}
+
+static struct notifier_block pnd2_mce_dec = {
+	.notifier_call	= pnd2_mce_check_error,
+};
+
+#ifdef CONFIG_EDAC_DEBUG
+/*
+ * Write an address to this file to exercise the address decode
+ * logic in this driver.
+ */
+static u64 pnd2_fake_addr;
+#define PND2_BLOB_SIZE 1024
+static char pnd2_result[PND2_BLOB_SIZE];
+static struct dentry *pnd2_test;
+static struct debugfs_blob_wrapper pnd2_blob = {
+	.data = pnd2_result,
+	.size = 0
+};
+
+static int debugfs_u64_set(void *data, u64 val)
+{
+	struct dram_addr daddr;
+	struct mce m;
+
+	*(u64 *)data = val;
+	m.mcgstatus = 0;
+	/* ADDRV + MemRd + Unknown channel */
+	m.status = MCI_STATUS_ADDRV + 0x9f;
+	m.addr = val;
+	pnd2_mce_output_error(pnd2_mci, &m, &daddr);
+	snprintf(pnd2_blob.data, PND2_BLOB_SIZE,
+			 "SysAddr=%llx Channel=%d DIMM=%d Rank=%d Bank=%d Row=%d Column=%d\n",
+			 m.addr, daddr.chan, daddr.dimm, daddr.rank, daddr.bank, daddr.row, daddr.col);
+	pnd2_blob.size = strlen(pnd2_blob.data);
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
+
+static void setup_pnd2_debug(void)
+{
+	pnd2_test = edac_debugfs_create_dir("pnd2_test");
+	edac_debugfs_create_file("pnd2_debug_addr", 0200, pnd2_test,
+							 &pnd2_fake_addr, &fops_u64_wo);
+	debugfs_create_blob("pnd2_debug_results", 0400, pnd2_test, &pnd2_blob);
+}
+
+static void teardown_pnd2_debug(void)
+{
+	debugfs_remove_recursive(pnd2_test);
+}
+#else
+static void setup_pnd2_debug(void)	{}
+static void teardown_pnd2_debug(void)	{}
+#endif /* CONFIG_EDAC_DEBUG */
+
+
+static int pnd2_probe(void)
+{
+	int rc;
+
+	edac_dbg(2, "\n");
+	rc = get_registers();
+	if (rc)
+		return rc;
+
+	return pnd2_register_mci(&pnd2_mci);
+}
+
+static void pnd2_remove(void)
+{
+	edac_dbg(0, "\n");
+	pnd2_unregister_mci(pnd2_mci);
+}
+
+static struct dunit_ops apl_ops = {
+		.name			= "pnd2/apl",
+		.type			= APL,
+		.pmiaddr_shift		= LOG2_PMI_ADDR_GRANULARITY,
+		.pmiidx_shift		= 0,
+		.channels		= APL_NUM_CHANNELS,
+		.dimms_per_channel	= 1,
+		.rd_reg			= apl_rd_reg,
+		.get_registers		= apl_get_registers,
+		.check_ecc		= apl_check_ecc_active,
+		.mk_region		= apl_mk_region,
+		.get_dimm_config	= apl_get_dimm_config,
+		.pmi2mem		= apl_pmi2mem,
+};
+
+static struct dunit_ops dnv_ops = {
+		.name			= "pnd2/dnv",
+		.type			= DNV,
+		.pmiaddr_shift		= 0,
+		.pmiidx_shift		= 1,
+		.channels		= DNV_NUM_CHANNELS,
+		.dimms_per_channel	= 2,
+		.rd_reg			= dnv_rd_reg,
+		.get_registers		= dnv_get_registers,
+		.check_ecc		= dnv_check_ecc_active,
+		.mk_region		= dnv_mk_region,
+		.get_dimm_config	= dnv_get_dimm_config,
+		.pmi2mem		= dnv_pmi2mem,
+};
+
+static const struct x86_cpu_id pnd2_cpuids[] = {
+	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_GOLDMONT, 0, (kernel_ulong_t)&apl_ops },
+	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_GOLDMONT_X, 0, (kernel_ulong_t)&dnv_ops },
+	{ }
+};
+MODULE_DEVICE_TABLE(x86cpu, pnd2_cpuids);
+
+static int __init pnd2_init(void)
+{
+	const struct x86_cpu_id *id;
+	const char *owner;
+	int rc;
+
+	edac_dbg(2, "\n");
+
+	owner = edac_get_owner();
+	if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR)))
+		return -EBUSY;
+
+	id = x86_match_cpu(pnd2_cpuids);
+	if (!id)
+		return -ENODEV;
+
+	ops = (struct dunit_ops *)id->driver_data;
+
+	if (ops->type == APL) {
+		p2sb_bus = pci_find_bus(0, 0);
+		if (!p2sb_bus)
+			return -ENODEV;
+	}
+
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
+
+	rc = pnd2_probe();
+	if (rc < 0) {
+		pnd2_printk(KERN_ERR, "Failed to register device with error %d.\n", rc);
+		return rc;
+	}
+
+	if (!pnd2_mci)
+		return -ENODEV;
+
+	mce_register_decode_chain(&pnd2_mce_dec);
+	setup_pnd2_debug();
+
+	return 0;
+}
+
+static void __exit pnd2_exit(void)
+{
+	edac_dbg(2, "\n");
+	teardown_pnd2_debug();
+	mce_unregister_decode_chain(&pnd2_mce_dec);
+	pnd2_remove();
+}
+
+module_init(pnd2_init);
+module_exit(pnd2_exit);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Tony Luck");
+MODULE_DESCRIPTION("MC Driver for Intel SoC using Pondicherry memory controller");
diff --git a/drivers/edac/pnd2_edac.h b/drivers/edac/pnd2_edac.h
new file mode 100644
index 000000000..61b6e7949
--- /dev/null
+++ b/drivers/edac/pnd2_edac.h
@@ -0,0 +1,301 @@
+/*
+ * Register bitfield descriptions for Pondicherry2 memory controller.
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _PND2_REGS_H
+#define _PND2_REGS_H
+
+struct b_cr_touud_lo_pci {
+	u32	lock : 1;
+	u32	reserved_1 : 19;
+	u32	touud : 12;
+};
+
+#define b_cr_touud_lo_pci_port 0x4c
+#define b_cr_touud_lo_pci_offset 0xa8
+#define b_cr_touud_lo_pci_r_opcode 0x04
+
+struct b_cr_touud_hi_pci {
+	u32	touud : 7;
+	u32	reserved_0 : 25;
+};
+
+#define b_cr_touud_hi_pci_port 0x4c
+#define b_cr_touud_hi_pci_offset 0xac
+#define b_cr_touud_hi_pci_r_opcode 0x04
+
+struct b_cr_tolud_pci {
+	u32	lock : 1;
+	u32	reserved_0 : 19;
+	u32	tolud : 12;
+};
+
+#define b_cr_tolud_pci_port 0x4c
+#define b_cr_tolud_pci_offset 0xbc
+#define b_cr_tolud_pci_r_opcode 0x04
+
+struct b_cr_mchbar_lo_pci {
+	u32 enable : 1;
+	u32 pad_3_1 : 3;
+	u32 pad_14_4: 11;
+	u32 base: 17;
+};
+
+struct b_cr_mchbar_hi_pci {
+	u32 base : 7;
+	u32 pad_31_7 : 25;
+};
+
+/* Symmetric region */
+struct b_cr_slice_channel_hash {
+	u64	slice_1_disabled : 1;
+	u64	hvm_mode : 1;
+	u64	interleave_mode : 2;
+	u64	slice_0_mem_disabled : 1;
+	u64	reserved_0 : 1;
+	u64	slice_hash_mask : 14;
+	u64	reserved_1 : 11;
+	u64	enable_pmi_dual_data_mode : 1;
+	u64	ch_1_disabled : 1;
+	u64	reserved_2 : 1;
+	u64	sym_slice0_channel_enabled : 2;
+	u64	sym_slice1_channel_enabled : 2;
+	u64	ch_hash_mask : 14;
+	u64	reserved_3 : 11;
+	u64	lock : 1;
+};
+
+#define b_cr_slice_channel_hash_port 0x4c
+#define b_cr_slice_channel_hash_offset 0x4c58
+#define b_cr_slice_channel_hash_r_opcode 0x06
+
+struct b_cr_mot_out_base_mchbar {
+	u32	reserved_0 : 14;
+	u32	mot_out_base : 15;
+	u32	reserved_1 : 1;
+	u32	tr_en : 1;
+	u32	imr_en : 1;
+};
+
+#define b_cr_mot_out_base_mchbar_port 0x4c
+#define b_cr_mot_out_base_mchbar_offset 0x6af0
+#define b_cr_mot_out_base_mchbar_r_opcode 0x00
+
+struct b_cr_mot_out_mask_mchbar {
+	u32	reserved_0 : 14;
+	u32	mot_out_mask : 15;
+	u32	reserved_1 : 1;
+	u32	ia_iwb_en : 1;
+	u32	gt_iwb_en : 1;
+};
+
+#define b_cr_mot_out_mask_mchbar_port 0x4c
+#define b_cr_mot_out_mask_mchbar_offset 0x6af4
+#define b_cr_mot_out_mask_mchbar_r_opcode 0x00
+
+struct b_cr_asym_mem_region0_mchbar {
+	u32	pad : 4;
+	u32	slice0_asym_base : 11;
+	u32	pad_18_15 : 4;
+	u32	slice0_asym_limit : 11;
+	u32	slice0_asym_channel_select : 1;
+	u32	slice0_asym_enable : 1;
+};
+
+#define b_cr_asym_mem_region0_mchbar_port 0x4c
+#define b_cr_asym_mem_region0_mchbar_offset 0x6e40
+#define b_cr_asym_mem_region0_mchbar_r_opcode 0x00
+
+struct b_cr_asym_mem_region1_mchbar {
+	u32	pad : 4;
+	u32	slice1_asym_base : 11;
+	u32	pad_18_15 : 4;
+	u32	slice1_asym_limit : 11;
+	u32	slice1_asym_channel_select : 1;
+	u32	slice1_asym_enable : 1;
+};
+
+#define b_cr_asym_mem_region1_mchbar_port 0x4c
+#define b_cr_asym_mem_region1_mchbar_offset 0x6e44
+#define b_cr_asym_mem_region1_mchbar_r_opcode 0x00
+
+/* Some bit fields moved in above two structs on Denverton */
+struct b_cr_asym_mem_region_denverton {
+	u32	pad : 4;
+	u32	slice_asym_base : 8;
+	u32	pad_19_12 : 8;
+	u32	slice_asym_limit : 8;
+	u32	pad_28_30 : 3;
+	u32	slice_asym_enable : 1;
+};
+
+struct b_cr_asym_2way_mem_region_mchbar {
+	u32	pad : 2;
+	u32	asym_2way_intlv_mode : 2;
+	u32	asym_2way_base : 11;
+	u32	pad_16_15 : 2;
+	u32	asym_2way_limit : 11;
+	u32	pad_30_28 : 3;
+	u32	asym_2way_interleave_enable : 1;
+};
+
+#define b_cr_asym_2way_mem_region_mchbar_port 0x4c
+#define b_cr_asym_2way_mem_region_mchbar_offset 0x6e50
+#define b_cr_asym_2way_mem_region_mchbar_r_opcode 0x00
+
+/* Apollo Lake d-unit */
+
+struct d_cr_drp0 {
+	u32	rken0 : 1;
+	u32	rken1 : 1;
+	u32	ddmen : 1;
+	u32	rsvd3 : 1;
+	u32	dwid : 2;
+	u32	dden : 3;
+	u32	rsvd13_9 : 5;
+	u32	rsien : 1;
+	u32	bahen : 1;
+	u32	rsvd18_16 : 3;
+	u32	caswizzle : 2;
+	u32	eccen : 1;
+	u32	dramtype : 3;
+	u32	blmode : 3;
+	u32	addrdec : 2;
+	u32	dramdevice_pr : 2;
+};
+
+#define d_cr_drp0_offset 0x1400
+#define d_cr_drp0_r_opcode 0x00
+
+/* Denverton d-unit */
+
+struct d_cr_dsch {
+	u32	ch0en : 1;
+	u32	ch1en : 1;
+	u32	ddr4en : 1;
+	u32	coldwake : 1;
+	u32	newbypdis : 1;
+	u32	chan_width : 1;
+	u32	rsvd6_6 : 1;
+	u32	ooodis : 1;
+	u32	rsvd18_8 : 11;
+	u32	ic : 1;
+	u32	rsvd31_20 : 12;
+};
+
+#define d_cr_dsch_port 0x16
+#define d_cr_dsch_offset 0x0
+#define d_cr_dsch_r_opcode 0x0
+
+struct d_cr_ecc_ctrl {
+	u32	eccen : 1;
+	u32	rsvd31_1 : 31;
+};
+
+#define d_cr_ecc_ctrl_offset 0x180
+#define d_cr_ecc_ctrl_r_opcode 0x0
+
+struct d_cr_drp {
+	u32	rken0 : 1;
+	u32	rken1 : 1;
+	u32	rken2 : 1;
+	u32	rken3 : 1;
+	u32	dimmdwid0 : 2;
+	u32	dimmdden0 : 2;
+	u32	dimmdwid1 : 2;
+	u32	dimmdden1 : 2;
+	u32	rsvd15_12 : 4;
+	u32	dimmflip : 1;
+	u32	rsvd31_17 : 15;
+};
+
+#define d_cr_drp_offset 0x158
+#define d_cr_drp_r_opcode 0x0
+
+struct d_cr_dmap {
+	u32	ba0 : 5;
+	u32	ba1 : 5;
+	u32	bg0 : 5; /* if ddr3, ba2 = bg0 */
+	u32	bg1 : 5; /* if ddr3, ba3 = bg1 */
+	u32	rs0 : 5;
+	u32	rs1 : 5;
+	u32	rsvd : 2;
+};
+
+#define d_cr_dmap_offset 0x174
+#define d_cr_dmap_r_opcode 0x0
+
+struct d_cr_dmap1 {
+	u32	ca11 : 6;
+	u32	bxor : 1;
+	u32	rsvd : 25;
+};
+
+#define d_cr_dmap1_offset 0xb4
+#define d_cr_dmap1_r_opcode 0x0
+
+struct d_cr_dmap2 {
+	u32	row0 : 5;
+	u32	row1 : 5;
+	u32	row2 : 5;
+	u32	row3 : 5;
+	u32	row4 : 5;
+	u32	row5 : 5;
+	u32	rsvd : 2;
+};
+
+#define d_cr_dmap2_offset 0x148
+#define d_cr_dmap2_r_opcode 0x0
+
+struct d_cr_dmap3 {
+	u32	row6 : 5;
+	u32	row7 : 5;
+	u32	row8 : 5;
+	u32	row9 : 5;
+	u32	row10 : 5;
+	u32	row11 : 5;
+	u32	rsvd : 2;
+};
+
+#define d_cr_dmap3_offset 0x14c
+#define d_cr_dmap3_r_opcode 0x0
+
+struct d_cr_dmap4 {
+	u32	row12 : 5;
+	u32	row13 : 5;
+	u32	row14 : 5;
+	u32	row15 : 5;
+	u32	row16 : 5;
+	u32	row17 : 5;
+	u32	rsvd : 2;
+};
+
+#define d_cr_dmap4_offset 0x150
+#define d_cr_dmap4_r_opcode 0x0
+
+struct d_cr_dmap5 {
+	u32	ca3 : 4;
+	u32	ca4 : 4;
+	u32	ca5 : 4;
+	u32	ca6 : 4;
+	u32	ca7 : 4;
+	u32	ca8 : 4;
+	u32	ca9 : 4;
+	u32	rsvd : 4;
+};
+
+#define d_cr_dmap5_offset 0x154
+#define d_cr_dmap5_r_opcode 0x0
+
+#endif /* _PND2_REGS_H */
diff --git a/drivers/edac/ppc4xx_edac.c b/drivers/edac/ppc4xx_edac.c
new file mode 100644
index 000000000..fd3202c30
--- /dev/null
+++ b/drivers/edac/ppc4xx_edac.c
@@ -0,0 +1,1437 @@
+/*
+ * Copyright (c) 2008 Nuovation System Designs, LLC
+ *   Grant Erickson <gerickson@nuovations.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#include <linux/edac.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/types.h>
+
+#include <asm/dcr.h>
+
+#include "edac_module.h"
+#include "ppc4xx_edac.h"
+
+/*
+ * This file implements a driver for monitoring and handling events
+ * associated with the IMB DDR2 ECC controller found in the AMCC/IBM
+ * 405EX[r], 440SP, 440SPe, 460EX, 460GT and 460SX.
+ *
+ * As realized in the 405EX[r], this controller features:
+ *
+ *   - Support for registered- and non-registered DDR1 and DDR2 memory.
+ *   - 32-bit or 16-bit memory interface with optional ECC.
+ *
+ *     o ECC support includes:
+ *
+ *       - 4-bit SEC/DED
+ *       - Aligned-nibble error detect
+ *       - Bypass mode
+ *
+ *   - Two (2) memory banks/ranks.
+ *   - Up to 1 GiB per bank/rank in 32-bit mode and up to 512 MiB per
+ *     bank/rank in 16-bit mode.
+ *
+ * As realized in the 440SP and 440SPe, this controller changes/adds:
+ *
+ *   - 64-bit or 32-bit memory interface with optional ECC.
+ *
+ *     o ECC support includes:
+ *
+ *       - 8-bit SEC/DED
+ *       - Aligned-nibble error detect
+ *       - Bypass mode
+ *
+ *   - Up to 4 GiB per bank/rank in 64-bit mode and up to 2 GiB
+ *     per bank/rank in 32-bit mode.
+ *
+ * As realized in the 460EX and 460GT, this controller changes/adds:
+ *
+ *   - 64-bit or 32-bit memory interface with optional ECC.
+ *
+ *     o ECC support includes:
+ *
+ *       - 8-bit SEC/DED
+ *       - Aligned-nibble error detect
+ *       - Bypass mode
+ *
+ *   - Four (4) memory banks/ranks.
+ *   - Up to 16 GiB per bank/rank in 64-bit mode and up to 8 GiB
+ *     per bank/rank in 32-bit mode.
+ *
+ * At present, this driver has ONLY been tested against the controller
+ * realization in the 405EX[r] on the AMCC Kilauea and Haleakala
+ * boards (256 MiB w/o ECC memory soldered onto the board) and a
+ * proprietary board based on those designs (128 MiB ECC memory, also
+ * soldered onto the board).
+ *
+ * Dynamic feature detection and handling needs to be added for the
+ * other realizations of this controller listed above.
+ *
+ * Eventually, this driver will likely be adapted to the above variant
+ * realizations of this controller as well as broken apart to handle
+ * the other known ECC-capable controllers prevalent in other 4xx
+ * processors:
+ *
+ *   - IBM SDRAM (405GP, 405CR and 405EP) "ibm,sdram-4xx"
+ *   - IBM DDR1 (440GP, 440GX, 440EP and 440GR) "ibm,sdram-4xx-ddr"
+ *   - Denali DDR1/DDR2 (440EPX and 440GRX) "denali,sdram-4xx-ddr2"
+ *
+ * For this controller, unfortunately, correctable errors report
+ * nothing more than the beat/cycle and byte/lane the correction
+ * occurred on and the check bit group that covered the error.
+ *
+ * In contrast, uncorrectable errors also report the failing address,
+ * the bus master and the transaction direction (i.e. read or write)
+ *
+ * Regardless of whether the error is a CE or a UE, we report the
+ * following pieces of information in the driver-unique message to the
+ * EDAC subsystem:
+ *
+ *   - Device tree path
+ *   - Bank(s)
+ *   - Check bit error group
+ *   - Beat(s)/lane(s)
+ */
+
+/* Preprocessor Definitions */
+
+#define EDAC_OPSTATE_INT_STR		"interrupt"
+#define EDAC_OPSTATE_POLL_STR		"polled"
+#define EDAC_OPSTATE_UNKNOWN_STR	"unknown"
+
+#define PPC4XX_EDAC_MODULE_NAME		"ppc4xx_edac"
+#define PPC4XX_EDAC_MODULE_REVISION	"v1.0.0"
+
+#define PPC4XX_EDAC_MESSAGE_SIZE	256
+
+/*
+ * Kernel logging without an EDAC instance
+ */
+#define ppc4xx_edac_printk(level, fmt, arg...) \
+	edac_printk(level, "PPC4xx MC", fmt, ##arg)
+
+/*
+ * Kernel logging with an EDAC instance
+ */
+#define ppc4xx_edac_mc_printk(level, mci, fmt, arg...) \
+	edac_mc_chipset_printk(mci, level, "PPC4xx", fmt, ##arg)
+
+/*
+ * Macros to convert bank configuration size enumerations into MiB and
+ * page values.
+ */
+#define SDRAM_MBCF_SZ_MiB_MIN		4
+#define SDRAM_MBCF_SZ_TO_MiB(n)		(SDRAM_MBCF_SZ_MiB_MIN \
+					 << (SDRAM_MBCF_SZ_DECODE(n)))
+#define SDRAM_MBCF_SZ_TO_PAGES(n)	(SDRAM_MBCF_SZ_MiB_MIN \
+					 << (20 - PAGE_SHIFT + \
+					     SDRAM_MBCF_SZ_DECODE(n)))
+
+/*
+ * The ibm,sdram-4xx-ddr2 Device Control Registers (DCRs) are
+ * indirectly accessed and have a base and length defined by the
+ * device tree. The base can be anything; however, we expect the
+ * length to be precisely two registers, the first for the address
+ * window and the second for the data window.
+ */
+#define SDRAM_DCR_RESOURCE_LEN		2
+#define SDRAM_DCR_ADDR_OFFSET		0
+#define SDRAM_DCR_DATA_OFFSET		1
+
+/*
+ * Device tree interrupt indices
+ */
+#define INTMAP_ECCDED_INDEX		0	/* Double-bit Error Detect */
+#define INTMAP_ECCSEC_INDEX		1	/* Single-bit Error Correct */
+
+/* Type Definitions */
+
+/*
+ * PPC4xx SDRAM memory controller private instance data
+ */
+struct ppc4xx_edac_pdata {
+	dcr_host_t dcr_host;	/* Indirect DCR address/data window mapping */
+	struct {
+		int sec;	/* Single-bit correctable error IRQ assigned */
+		int ded;	/* Double-bit detectable error IRQ assigned */
+	} irqs;
+};
+
+/*
+ * Various status data gathered and manipulated when checking and
+ * reporting ECC status.
+ */
+struct ppc4xx_ecc_status {
+	u32 ecces;
+	u32 besr;
+	u32 bearh;
+	u32 bearl;
+	u32 wmirq;
+};
+
+/* Function Prototypes */
+
+static int ppc4xx_edac_probe(struct platform_device *device);
+static int ppc4xx_edac_remove(struct platform_device *device);
+
+/* Global Variables */
+
+/*
+ * Device tree node type and compatible tuples this driver can match
+ * on.
+ */
+static const struct of_device_id ppc4xx_edac_match[] = {
+	{
+		.compatible	= "ibm,sdram-4xx-ddr2"
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ppc4xx_edac_match);
+
+static struct platform_driver ppc4xx_edac_driver = {
+	.probe			= ppc4xx_edac_probe,
+	.remove			= ppc4xx_edac_remove,
+	.driver = {
+		.name = PPC4XX_EDAC_MODULE_NAME,
+		.of_match_table = ppc4xx_edac_match,
+	},
+};
+
+/*
+ * TODO: The row and channel parameters likely need to be dynamically
+ * set based on the aforementioned variant controller realizations.
+ */
+static const unsigned ppc4xx_edac_nr_csrows = 2;
+static const unsigned ppc4xx_edac_nr_chans = 1;
+
+/*
+ * Strings associated with PLB master IDs capable of being posted in
+ * SDRAM_BESR or SDRAM_WMIRQ on uncorrectable ECC errors.
+ */
+static const char * const ppc4xx_plb_masters[9] = {
+	[SDRAM_PLB_M0ID_ICU]	= "ICU",
+	[SDRAM_PLB_M0ID_PCIE0]	= "PCI-E 0",
+	[SDRAM_PLB_M0ID_PCIE1]	= "PCI-E 1",
+	[SDRAM_PLB_M0ID_DMA]	= "DMA",
+	[SDRAM_PLB_M0ID_DCU]	= "DCU",
+	[SDRAM_PLB_M0ID_OPB]	= "OPB",
+	[SDRAM_PLB_M0ID_MAL]	= "MAL",
+	[SDRAM_PLB_M0ID_SEC]	= "SEC",
+	[SDRAM_PLB_M0ID_AHB]	= "AHB"
+};
+
+/**
+ * mfsdram - read and return controller register data
+ * @dcr_host: A pointer to the DCR mapping.
+ * @idcr_n: The indirect DCR register to read.
+ *
+ * This routine reads and returns the data associated with the
+ * controller's specified indirect DCR register.
+ *
+ * Returns the read data.
+ */
+static inline u32
+mfsdram(const dcr_host_t *dcr_host, unsigned int idcr_n)
+{
+	return __mfdcri(dcr_host->base + SDRAM_DCR_ADDR_OFFSET,
+			dcr_host->base + SDRAM_DCR_DATA_OFFSET,
+			idcr_n);
+}
+
+/**
+ * mtsdram - write controller register data
+ * @dcr_host: A pointer to the DCR mapping.
+ * @idcr_n: The indirect DCR register to write.
+ * @value: The data to write.
+ *
+ * This routine writes the provided data to the controller's specified
+ * indirect DCR register.
+ */
+static inline void
+mtsdram(const dcr_host_t *dcr_host, unsigned int idcr_n, u32 value)
+{
+	return __mtdcri(dcr_host->base + SDRAM_DCR_ADDR_OFFSET,
+			dcr_host->base + SDRAM_DCR_DATA_OFFSET,
+			idcr_n,
+			value);
+}
+
+/**
+ * ppc4xx_edac_check_bank_error - check a bank for an ECC bank error
+ * @status: A pointer to the ECC status structure to check for an
+ *          ECC bank error.
+ * @bank: The bank to check for an ECC error.
+ *
+ * This routine determines whether the specified bank has an ECC
+ * error.
+ *
+ * Returns true if the specified bank has an ECC error; otherwise,
+ * false.
+ */
+static bool
+ppc4xx_edac_check_bank_error(const struct ppc4xx_ecc_status *status,
+			     unsigned int bank)
+{
+	switch (bank) {
+	case 0:
+		return status->ecces & SDRAM_ECCES_BK0ER;
+	case 1:
+		return status->ecces & SDRAM_ECCES_BK1ER;
+	default:
+		return false;
+	}
+}
+
+/**
+ * ppc4xx_edac_generate_bank_message - generate interpretted bank status message
+ * @mci: A pointer to the EDAC memory controller instance associated
+ *       with the bank message being generated.
+ * @status: A pointer to the ECC status structure to generate the
+ *          message from.
+ * @buffer: A pointer to the buffer in which to generate the
+ *          message.
+ * @size: The size, in bytes, of space available in buffer.
+ *
+ * This routine generates to the provided buffer the portion of the
+ * driver-unique report message associated with the ECCESS[BKNER]
+ * field of the specified ECC status.
+ *
+ * Returns the number of characters generated on success; otherwise, <
+ * 0 on error.
+ */
+static int
+ppc4xx_edac_generate_bank_message(const struct mem_ctl_info *mci,
+				  const struct ppc4xx_ecc_status *status,
+				  char *buffer,
+				  size_t size)
+{
+	int n, total = 0;
+	unsigned int row, rows;
+
+	n = snprintf(buffer, size, "%s: Banks: ", mci->dev_name);
+
+	if (n < 0 || n >= size)
+		goto fail;
+
+	buffer += n;
+	size -= n;
+	total += n;
+
+	for (rows = 0, row = 0; row < mci->nr_csrows; row++) {
+		if (ppc4xx_edac_check_bank_error(status, row)) {
+			n = snprintf(buffer, size, "%s%u",
+					(rows++ ? ", " : ""), row);
+
+			if (n < 0 || n >= size)
+				goto fail;
+
+			buffer += n;
+			size -= n;
+			total += n;
+		}
+	}
+
+	n = snprintf(buffer, size, "%s; ", rows ? "" : "None");
+
+	if (n < 0 || n >= size)
+		goto fail;
+
+	buffer += n;
+	size -= n;
+	total += n;
+
+ fail:
+	return total;
+}
+
+/**
+ * ppc4xx_edac_generate_checkbit_message - generate interpretted checkbit message
+ * @mci: A pointer to the EDAC memory controller instance associated
+ *       with the checkbit message being generated.
+ * @status: A pointer to the ECC status structure to generate the
+ *          message from.
+ * @buffer: A pointer to the buffer in which to generate the
+ *          message.
+ * @size: The size, in bytes, of space available in buffer.
+ *
+ * This routine generates to the provided buffer the portion of the
+ * driver-unique report message associated with the ECCESS[CKBER]
+ * field of the specified ECC status.
+ *
+ * Returns the number of characters generated on success; otherwise, <
+ * 0 on error.
+ */
+static int
+ppc4xx_edac_generate_checkbit_message(const struct mem_ctl_info *mci,
+				      const struct ppc4xx_ecc_status *status,
+				      char *buffer,
+				      size_t size)
+{
+	const struct ppc4xx_edac_pdata *pdata = mci->pvt_info;
+	const char *ckber = NULL;
+
+	switch (status->ecces & SDRAM_ECCES_CKBER_MASK) {
+	case SDRAM_ECCES_CKBER_NONE:
+		ckber = "None";
+		break;
+	case SDRAM_ECCES_CKBER_32_ECC_0_3:
+		ckber = "ECC0:3";
+		break;
+	case SDRAM_ECCES_CKBER_32_ECC_4_8:
+		switch (mfsdram(&pdata->dcr_host, SDRAM_MCOPT1) &
+			SDRAM_MCOPT1_WDTH_MASK) {
+		case SDRAM_MCOPT1_WDTH_16:
+			ckber = "ECC0:3";
+			break;
+		case SDRAM_MCOPT1_WDTH_32:
+			ckber = "ECC4:8";
+			break;
+		default:
+			ckber = "Unknown";
+			break;
+		}
+		break;
+	case SDRAM_ECCES_CKBER_32_ECC_0_8:
+		ckber = "ECC0:8";
+		break;
+	default:
+		ckber = "Unknown";
+		break;
+	}
+
+	return snprintf(buffer, size, "Checkbit Error: %s", ckber);
+}
+
+/**
+ * ppc4xx_edac_generate_lane_message - generate interpretted byte lane message
+ * @mci: A pointer to the EDAC memory controller instance associated
+ *       with the byte lane message being generated.
+ * @status: A pointer to the ECC status structure to generate the
+ *          message from.
+ * @buffer: A pointer to the buffer in which to generate the
+ *          message.
+ * @size: The size, in bytes, of space available in buffer.
+ *
+ * This routine generates to the provided buffer the portion of the
+ * driver-unique report message associated with the ECCESS[BNCE]
+ * field of the specified ECC status.
+ *
+ * Returns the number of characters generated on success; otherwise, <
+ * 0 on error.
+ */
+static int
+ppc4xx_edac_generate_lane_message(const struct mem_ctl_info *mci,
+				  const struct ppc4xx_ecc_status *status,
+				  char *buffer,
+				  size_t size)
+{
+	int n, total = 0;
+	unsigned int lane, lanes;
+	const unsigned int first_lane = 0;
+	const unsigned int lane_count = 16;
+
+	n = snprintf(buffer, size, "; Byte Lane Errors: ");
+
+	if (n < 0 || n >= size)
+		goto fail;
+
+	buffer += n;
+	size -= n;
+	total += n;
+
+	for (lanes = 0, lane = first_lane; lane < lane_count; lane++) {
+		if ((status->ecces & SDRAM_ECCES_BNCE_ENCODE(lane)) != 0) {
+			n = snprintf(buffer, size,
+				     "%s%u",
+				     (lanes++ ? ", " : ""), lane);
+
+			if (n < 0 || n >= size)
+				goto fail;
+
+			buffer += n;
+			size -= n;
+			total += n;
+		}
+	}
+
+	n = snprintf(buffer, size, "%s; ", lanes ? "" : "None");
+
+	if (n < 0 || n >= size)
+		goto fail;
+
+	buffer += n;
+	size -= n;
+	total += n;
+
+ fail:
+	return total;
+}
+
+/**
+ * ppc4xx_edac_generate_ecc_message - generate interpretted ECC status message
+ * @mci: A pointer to the EDAC memory controller instance associated
+ *       with the ECCES message being generated.
+ * @status: A pointer to the ECC status structure to generate the
+ *          message from.
+ * @buffer: A pointer to the buffer in which to generate the
+ *          message.
+ * @size: The size, in bytes, of space available in buffer.
+ *
+ * This routine generates to the provided buffer the portion of the
+ * driver-unique report message associated with the ECCESS register of
+ * the specified ECC status.
+ *
+ * Returns the number of characters generated on success; otherwise, <
+ * 0 on error.
+ */
+static int
+ppc4xx_edac_generate_ecc_message(const struct mem_ctl_info *mci,
+				 const struct ppc4xx_ecc_status *status,
+				 char *buffer,
+				 size_t size)
+{
+	int n, total = 0;
+
+	n = ppc4xx_edac_generate_bank_message(mci, status, buffer, size);
+
+	if (n < 0 || n >= size)
+		goto fail;
+
+	buffer += n;
+	size -= n;
+	total += n;
+
+	n = ppc4xx_edac_generate_checkbit_message(mci, status, buffer, size);
+
+	if (n < 0 || n >= size)
+		goto fail;
+
+	buffer += n;
+	size -= n;
+	total += n;
+
+	n = ppc4xx_edac_generate_lane_message(mci, status, buffer, size);
+
+	if (n < 0 || n >= size)
+		goto fail;
+
+	buffer += n;
+	size -= n;
+	total += n;
+
+ fail:
+	return total;
+}
+
+/**
+ * ppc4xx_edac_generate_plb_message - generate interpretted PLB status message
+ * @mci: A pointer to the EDAC memory controller instance associated
+ *       with the PLB message being generated.
+ * @status: A pointer to the ECC status structure to generate the
+ *          message from.
+ * @buffer: A pointer to the buffer in which to generate the
+ *          message.
+ * @size: The size, in bytes, of space available in buffer.
+ *
+ * This routine generates to the provided buffer the portion of the
+ * driver-unique report message associated with the PLB-related BESR
+ * and/or WMIRQ registers of the specified ECC status.
+ *
+ * Returns the number of characters generated on success; otherwise, <
+ * 0 on error.
+ */
+static int
+ppc4xx_edac_generate_plb_message(const struct mem_ctl_info *mci,
+				 const struct ppc4xx_ecc_status *status,
+				 char *buffer,
+				 size_t size)
+{
+	unsigned int master;
+	bool read;
+
+	if ((status->besr & SDRAM_BESR_MASK) == 0)
+		return 0;
+
+	if ((status->besr & SDRAM_BESR_M0ET_MASK) == SDRAM_BESR_M0ET_NONE)
+		return 0;
+
+	read = ((status->besr & SDRAM_BESR_M0RW_MASK) == SDRAM_BESR_M0RW_READ);
+
+	master = SDRAM_BESR_M0ID_DECODE(status->besr);
+
+	return snprintf(buffer, size,
+			"%s error w/ PLB master %u \"%s\"; ",
+			(read ? "Read" : "Write"),
+			master,
+			(((master >= SDRAM_PLB_M0ID_FIRST) &&
+			  (master <= SDRAM_PLB_M0ID_LAST)) ?
+			 ppc4xx_plb_masters[master] : "UNKNOWN"));
+}
+
+/**
+ * ppc4xx_edac_generate_message - generate interpretted status message
+ * @mci: A pointer to the EDAC memory controller instance associated
+ *       with the driver-unique message being generated.
+ * @status: A pointer to the ECC status structure to generate the
+ *          message from.
+ * @buffer: A pointer to the buffer in which to generate the
+ *          message.
+ * @size: The size, in bytes, of space available in buffer.
+ *
+ * This routine generates to the provided buffer the driver-unique
+ * EDAC report message from the specified ECC status.
+ */
+static void
+ppc4xx_edac_generate_message(const struct mem_ctl_info *mci,
+			     const struct ppc4xx_ecc_status *status,
+			     char *buffer,
+			     size_t size)
+{
+	int n;
+
+	if (buffer == NULL || size == 0)
+		return;
+
+	n = ppc4xx_edac_generate_ecc_message(mci, status, buffer, size);
+
+	if (n < 0 || n >= size)
+		return;
+
+	buffer += n;
+	size -= n;
+
+	ppc4xx_edac_generate_plb_message(mci, status, buffer, size);
+}
+
+#ifdef DEBUG
+/**
+ * ppc4xx_ecc_dump_status - dump controller ECC status registers
+ * @mci: A pointer to the EDAC memory controller instance
+ *       associated with the status being dumped.
+ * @status: A pointer to the ECC status structure to generate the
+ *          dump from.
+ *
+ * This routine dumps to the kernel log buffer the raw and
+ * interpretted specified ECC status.
+ */
+static void
+ppc4xx_ecc_dump_status(const struct mem_ctl_info *mci,
+		       const struct ppc4xx_ecc_status *status)
+{
+	char message[PPC4XX_EDAC_MESSAGE_SIZE];
+
+	ppc4xx_edac_generate_message(mci, status, message, sizeof(message));
+
+	ppc4xx_edac_mc_printk(KERN_INFO, mci,
+			      "\n"
+			      "\tECCES: 0x%08x\n"
+			      "\tWMIRQ: 0x%08x\n"
+			      "\tBESR:  0x%08x\n"
+			      "\tBEAR:  0x%08x%08x\n"
+			      "\t%s\n",
+			      status->ecces,
+			      status->wmirq,
+			      status->besr,
+			      status->bearh,
+			      status->bearl,
+			      message);
+}
+#endif /* DEBUG */
+
+/**
+ * ppc4xx_ecc_get_status - get controller ECC status
+ * @mci: A pointer to the EDAC memory controller instance
+ *       associated with the status being retrieved.
+ * @status: A pointer to the ECC status structure to populate the
+ *          ECC status with.
+ *
+ * This routine reads and masks, as appropriate, all the relevant
+ * status registers that deal with ibm,sdram-4xx-ddr2 ECC errors.
+ * While we read all of them, for correctable errors, we only expect
+ * to deal with ECCES. For uncorrectable errors, we expect to deal
+ * with all of them.
+ */
+static void
+ppc4xx_ecc_get_status(const struct mem_ctl_info *mci,
+		      struct ppc4xx_ecc_status *status)
+{
+	const struct ppc4xx_edac_pdata *pdata = mci->pvt_info;
+	const dcr_host_t *dcr_host = &pdata->dcr_host;
+
+	status->ecces = mfsdram(dcr_host, SDRAM_ECCES) & SDRAM_ECCES_MASK;
+	status->wmirq = mfsdram(dcr_host, SDRAM_WMIRQ) & SDRAM_WMIRQ_MASK;
+	status->besr  = mfsdram(dcr_host, SDRAM_BESR)  & SDRAM_BESR_MASK;
+	status->bearl = mfsdram(dcr_host, SDRAM_BEARL);
+	status->bearh = mfsdram(dcr_host, SDRAM_BEARH);
+}
+
+/**
+ * ppc4xx_ecc_clear_status - clear controller ECC status
+ * @mci: A pointer to the EDAC memory controller instance
+ *       associated with the status being cleared.
+ * @status: A pointer to the ECC status structure containing the
+ *          values to write to clear the ECC status.
+ *
+ * This routine clears--by writing the masked (as appropriate) status
+ * values back to--the status registers that deal with
+ * ibm,sdram-4xx-ddr2 ECC errors.
+ */
+static void
+ppc4xx_ecc_clear_status(const struct mem_ctl_info *mci,
+			const struct ppc4xx_ecc_status *status)
+{
+	const struct ppc4xx_edac_pdata *pdata = mci->pvt_info;
+	const dcr_host_t *dcr_host = &pdata->dcr_host;
+
+	mtsdram(dcr_host, SDRAM_ECCES,	status->ecces & SDRAM_ECCES_MASK);
+	mtsdram(dcr_host, SDRAM_WMIRQ,	status->wmirq & SDRAM_WMIRQ_MASK);
+	mtsdram(dcr_host, SDRAM_BESR,	status->besr & SDRAM_BESR_MASK);
+	mtsdram(dcr_host, SDRAM_BEARL,	0);
+	mtsdram(dcr_host, SDRAM_BEARH,	0);
+}
+
+/**
+ * ppc4xx_edac_handle_ce - handle controller correctable ECC error (CE)
+ * @mci: A pointer to the EDAC memory controller instance
+ *       associated with the correctable error being handled and reported.
+ * @status: A pointer to the ECC status structure associated with
+ *          the correctable error being handled and reported.
+ *
+ * This routine handles an ibm,sdram-4xx-ddr2 controller ECC
+ * correctable error. Per the aforementioned discussion, there's not
+ * enough status available to use the full EDAC correctable error
+ * interface, so we just pass driver-unique message to the "no info"
+ * interface.
+ */
+static void
+ppc4xx_edac_handle_ce(struct mem_ctl_info *mci,
+		      const struct ppc4xx_ecc_status *status)
+{
+	int row;
+	char message[PPC4XX_EDAC_MESSAGE_SIZE];
+
+	ppc4xx_edac_generate_message(mci, status, message, sizeof(message));
+
+	for (row = 0; row < mci->nr_csrows; row++)
+		if (ppc4xx_edac_check_bank_error(status, row))
+			edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+					     0, 0, 0,
+					     row, 0, -1,
+					     message, "");
+}
+
+/**
+ * ppc4xx_edac_handle_ue - handle controller uncorrectable ECC error (UE)
+ * @mci: A pointer to the EDAC memory controller instance
+ *       associated with the uncorrectable error being handled and
+ *       reported.
+ * @status: A pointer to the ECC status structure associated with
+ *          the uncorrectable error being handled and reported.
+ *
+ * This routine handles an ibm,sdram-4xx-ddr2 controller ECC
+ * uncorrectable error.
+ */
+static void
+ppc4xx_edac_handle_ue(struct mem_ctl_info *mci,
+		      const struct ppc4xx_ecc_status *status)
+{
+	const u64 bear = ((u64)status->bearh << 32 | status->bearl);
+	const unsigned long page = bear >> PAGE_SHIFT;
+	const unsigned long offset = bear & ~PAGE_MASK;
+	int row;
+	char message[PPC4XX_EDAC_MESSAGE_SIZE];
+
+	ppc4xx_edac_generate_message(mci, status, message, sizeof(message));
+
+	for (row = 0; row < mci->nr_csrows; row++)
+		if (ppc4xx_edac_check_bank_error(status, row))
+			edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+					     page, offset, 0,
+					     row, 0, -1,
+					     message, "");
+}
+
+/**
+ * ppc4xx_edac_check - check controller for ECC errors
+ * @mci: A pointer to the EDAC memory controller instance
+ *       associated with the ibm,sdram-4xx-ddr2 controller being
+ *       checked.
+ *
+ * This routine is used to check and post ECC errors and is called by
+ * both the EDAC polling thread and this driver's CE and UE interrupt
+ * handler.
+ */
+static void
+ppc4xx_edac_check(struct mem_ctl_info *mci)
+{
+#ifdef DEBUG
+	static unsigned int count;
+#endif
+	struct ppc4xx_ecc_status status;
+
+	ppc4xx_ecc_get_status(mci, &status);
+
+#ifdef DEBUG
+	if (count++ % 30 == 0)
+		ppc4xx_ecc_dump_status(mci, &status);
+#endif
+
+	if (status.ecces & SDRAM_ECCES_UE)
+		ppc4xx_edac_handle_ue(mci, &status);
+
+	if (status.ecces & SDRAM_ECCES_CE)
+		ppc4xx_edac_handle_ce(mci, &status);
+
+	ppc4xx_ecc_clear_status(mci, &status);
+}
+
+/**
+ * ppc4xx_edac_isr - SEC (CE) and DED (UE) interrupt service routine
+ * @irq:    The virtual interrupt number being serviced.
+ * @dev_id: A pointer to the EDAC memory controller instance
+ *          associated with the interrupt being handled.
+ *
+ * This routine implements the interrupt handler for both correctable
+ * (CE) and uncorrectable (UE) ECC errors for the ibm,sdram-4xx-ddr2
+ * controller. It simply calls through to the same routine used during
+ * polling to check, report and clear the ECC status.
+ *
+ * Unconditionally returns IRQ_HANDLED.
+ */
+static irqreturn_t
+ppc4xx_edac_isr(int irq, void *dev_id)
+{
+	struct mem_ctl_info *mci = dev_id;
+
+	ppc4xx_edac_check(mci);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ppc4xx_edac_get_dtype - return the controller memory width
+ * @mcopt1: The 32-bit Memory Controller Option 1 register value
+ *          currently set for the controller, from which the width
+ *          is derived.
+ *
+ * This routine returns the EDAC device type width appropriate for the
+ * current controller configuration.
+ *
+ * TODO: This needs to be conditioned dynamically through feature
+ * flags or some such when other controller variants are supported as
+ * the 405EX[r] is 16-/32-bit and the others are 32-/64-bit with the
+ * 16- and 64-bit field definition/value/enumeration (b1) overloaded
+ * among them.
+ *
+ * Returns a device type width enumeration.
+ */
+static enum dev_type ppc4xx_edac_get_dtype(u32 mcopt1)
+{
+	switch (mcopt1 & SDRAM_MCOPT1_WDTH_MASK) {
+	case SDRAM_MCOPT1_WDTH_16:
+		return DEV_X2;
+	case SDRAM_MCOPT1_WDTH_32:
+		return DEV_X4;
+	default:
+		return DEV_UNKNOWN;
+	}
+}
+
+/**
+ * ppc4xx_edac_get_mtype - return controller memory type
+ * @mcopt1: The 32-bit Memory Controller Option 1 register value
+ *          currently set for the controller, from which the memory type
+ *          is derived.
+ *
+ * This routine returns the EDAC memory type appropriate for the
+ * current controller configuration.
+ *
+ * Returns a memory type enumeration.
+ */
+static enum mem_type ppc4xx_edac_get_mtype(u32 mcopt1)
+{
+	bool rden = ((mcopt1 & SDRAM_MCOPT1_RDEN_MASK) == SDRAM_MCOPT1_RDEN);
+
+	switch (mcopt1 & SDRAM_MCOPT1_DDR_TYPE_MASK) {
+	case SDRAM_MCOPT1_DDR2_TYPE:
+		return rden ? MEM_RDDR2 : MEM_DDR2;
+	case SDRAM_MCOPT1_DDR1_TYPE:
+		return rden ? MEM_RDDR : MEM_DDR;
+	default:
+		return MEM_UNKNOWN;
+	}
+}
+
+/**
+ * ppc4xx_edac_init_csrows - initialize driver instance rows
+ * @mci: A pointer to the EDAC memory controller instance
+ *       associated with the ibm,sdram-4xx-ddr2 controller for which
+ *       the csrows (i.e. banks/ranks) are being initialized.
+ * @mcopt1: The 32-bit Memory Controller Option 1 register value
+ *          currently set for the controller, from which bank width
+ *          and memory typ information is derived.
+ *
+ * This routine initializes the virtual "chip select rows" associated
+ * with the EDAC memory controller instance. An ibm,sdram-4xx-ddr2
+ * controller bank/rank is mapped to a row.
+ *
+ * Returns 0 if OK; otherwise, -EINVAL if the memory bank size
+ * configuration cannot be determined.
+ */
+static int ppc4xx_edac_init_csrows(struct mem_ctl_info *mci, u32 mcopt1)
+{
+	const struct ppc4xx_edac_pdata *pdata = mci->pvt_info;
+	int status = 0;
+	enum mem_type mtype;
+	enum dev_type dtype;
+	enum edac_type edac_mode;
+	int row, j;
+	u32 mbxcf, size, nr_pages;
+
+	/* Establish the memory type and width */
+
+	mtype = ppc4xx_edac_get_mtype(mcopt1);
+	dtype = ppc4xx_edac_get_dtype(mcopt1);
+
+	/* Establish EDAC mode */
+
+	if (mci->edac_cap & EDAC_FLAG_SECDED)
+		edac_mode = EDAC_SECDED;
+	else if (mci->edac_cap & EDAC_FLAG_EC)
+		edac_mode = EDAC_EC;
+	else
+		edac_mode = EDAC_NONE;
+
+	/*
+	 * Initialize each chip select row structure which correspond
+	 * 1:1 with a controller bank/rank.
+	 */
+
+	for (row = 0; row < mci->nr_csrows; row++) {
+		struct csrow_info *csi = mci->csrows[row];
+
+		/*
+		 * Get the configuration settings for this
+		 * row/bank/rank and skip disabled banks.
+		 */
+
+		mbxcf = mfsdram(&pdata->dcr_host, SDRAM_MBXCF(row));
+
+		if ((mbxcf & SDRAM_MBCF_BE_MASK) != SDRAM_MBCF_BE_ENABLE)
+			continue;
+
+		/* Map the bank configuration size setting to pages. */
+
+		size = mbxcf & SDRAM_MBCF_SZ_MASK;
+
+		switch (size) {
+		case SDRAM_MBCF_SZ_4MB:
+		case SDRAM_MBCF_SZ_8MB:
+		case SDRAM_MBCF_SZ_16MB:
+		case SDRAM_MBCF_SZ_32MB:
+		case SDRAM_MBCF_SZ_64MB:
+		case SDRAM_MBCF_SZ_128MB:
+		case SDRAM_MBCF_SZ_256MB:
+		case SDRAM_MBCF_SZ_512MB:
+		case SDRAM_MBCF_SZ_1GB:
+		case SDRAM_MBCF_SZ_2GB:
+		case SDRAM_MBCF_SZ_4GB:
+		case SDRAM_MBCF_SZ_8GB:
+			nr_pages = SDRAM_MBCF_SZ_TO_PAGES(size);
+			break;
+		default:
+			ppc4xx_edac_mc_printk(KERN_ERR, mci,
+					      "Unrecognized memory bank %d "
+					      "size 0x%08x\n",
+					      row, SDRAM_MBCF_SZ_DECODE(size));
+			status = -EINVAL;
+			goto done;
+		}
+
+		/*
+		 * It's unclear exactly what grain should be set to
+		 * here. The SDRAM_ECCES register allows resolution of
+		 * an error down to a nibble which would potentially
+		 * argue for a grain of '1' byte, even though we only
+		 * know the associated address for uncorrectable
+		 * errors. This value is not used at present for
+		 * anything other than error reporting so getting it
+		 * wrong should be of little consequence. Other
+		 * possible values would be the PLB width (16), the
+		 * page size (PAGE_SIZE) or the memory width (2 or 4).
+		 */
+		for (j = 0; j < csi->nr_channels; j++) {
+			struct dimm_info *dimm = csi->channels[j]->dimm;
+
+			dimm->nr_pages  = nr_pages / csi->nr_channels;
+			dimm->grain	= 1;
+
+			dimm->mtype	= mtype;
+			dimm->dtype	= dtype;
+
+			dimm->edac_mode	= edac_mode;
+		}
+	}
+
+ done:
+	return status;
+}
+
+/**
+ * ppc4xx_edac_mc_init - initialize driver instance
+ * @mci: A pointer to the EDAC memory controller instance being
+ *       initialized.
+ * @op: A pointer to the OpenFirmware device tree node associated
+ *      with the controller this EDAC instance is bound to.
+ * @dcr_host: A pointer to the DCR data containing the DCR mapping
+ *            for this controller instance.
+ * @mcopt1: The 32-bit Memory Controller Option 1 register value
+ *          currently set for the controller, from which ECC capabilities
+ *          and scrub mode are derived.
+ *
+ * This routine performs initialization of the EDAC memory controller
+ * instance and related driver-private data associated with the
+ * ibm,sdram-4xx-ddr2 memory controller the instance is bound to.
+ *
+ * Returns 0 if OK; otherwise, < 0 on error.
+ */
+static int ppc4xx_edac_mc_init(struct mem_ctl_info *mci,
+			       struct platform_device *op,
+			       const dcr_host_t *dcr_host, u32 mcopt1)
+{
+	int status = 0;
+	const u32 memcheck = (mcopt1 & SDRAM_MCOPT1_MCHK_MASK);
+	struct ppc4xx_edac_pdata *pdata = NULL;
+	const struct device_node *np = op->dev.of_node;
+
+	if (of_match_device(ppc4xx_edac_match, &op->dev) == NULL)
+		return -EINVAL;
+
+	/* Initial driver pointers and private data */
+
+	mci->pdev		= &op->dev;
+
+	dev_set_drvdata(mci->pdev, mci);
+
+	pdata			= mci->pvt_info;
+
+	pdata->dcr_host		= *dcr_host;
+
+	/* Initialize controller capabilities and configuration */
+
+	mci->mtype_cap		= (MEM_FLAG_DDR | MEM_FLAG_RDDR |
+				   MEM_FLAG_DDR2 | MEM_FLAG_RDDR2);
+
+	mci->edac_ctl_cap	= (EDAC_FLAG_NONE |
+				   EDAC_FLAG_EC |
+				   EDAC_FLAG_SECDED);
+
+	mci->scrub_cap		= SCRUB_NONE;
+	mci->scrub_mode		= SCRUB_NONE;
+
+	/*
+	 * Update the actual capabilites based on the MCOPT1[MCHK]
+	 * settings. Scrubbing is only useful if reporting is enabled.
+	 */
+
+	switch (memcheck) {
+	case SDRAM_MCOPT1_MCHK_CHK:
+		mci->edac_cap	= EDAC_FLAG_EC;
+		break;
+	case SDRAM_MCOPT1_MCHK_CHK_REP:
+		mci->edac_cap	= (EDAC_FLAG_EC | EDAC_FLAG_SECDED);
+		mci->scrub_mode	= SCRUB_SW_SRC;
+		break;
+	default:
+		mci->edac_cap	= EDAC_FLAG_NONE;
+		break;
+	}
+
+	/* Initialize strings */
+
+	mci->mod_name		= PPC4XX_EDAC_MODULE_NAME;
+	mci->ctl_name		= ppc4xx_edac_match->compatible,
+	mci->dev_name		= np->full_name;
+
+	/* Initialize callbacks */
+
+	mci->edac_check		= ppc4xx_edac_check;
+	mci->ctl_page_to_phys	= NULL;
+
+	/* Initialize chip select rows */
+
+	status = ppc4xx_edac_init_csrows(mci, mcopt1);
+
+	if (status)
+		ppc4xx_edac_mc_printk(KERN_ERR, mci,
+				      "Failed to initialize rows!\n");
+
+	return status;
+}
+
+/**
+ * ppc4xx_edac_register_irq - setup and register controller interrupts
+ * @op: A pointer to the OpenFirmware device tree node associated
+ *      with the controller this EDAC instance is bound to.
+ * @mci: A pointer to the EDAC memory controller instance
+ *       associated with the ibm,sdram-4xx-ddr2 controller for which
+ *       interrupts are being registered.
+ *
+ * This routine parses the correctable (CE) and uncorrectable error (UE)
+ * interrupts from the device tree node and maps and assigns them to
+ * the associated EDAC memory controller instance.
+ *
+ * Returns 0 if OK; otherwise, -ENODEV if the interrupts could not be
+ * mapped and assigned.
+ */
+static int ppc4xx_edac_register_irq(struct platform_device *op,
+				    struct mem_ctl_info *mci)
+{
+	int status = 0;
+	int ded_irq, sec_irq;
+	struct ppc4xx_edac_pdata *pdata = mci->pvt_info;
+	struct device_node *np = op->dev.of_node;
+
+	ded_irq = irq_of_parse_and_map(np, INTMAP_ECCDED_INDEX);
+	sec_irq = irq_of_parse_and_map(np, INTMAP_ECCSEC_INDEX);
+
+	if (!ded_irq || !sec_irq) {
+		ppc4xx_edac_mc_printk(KERN_ERR, mci,
+				      "Unable to map interrupts.\n");
+		status = -ENODEV;
+		goto fail;
+	}
+
+	status = request_irq(ded_irq,
+			     ppc4xx_edac_isr,
+			     0,
+			     "[EDAC] MC ECCDED",
+			     mci);
+
+	if (status < 0) {
+		ppc4xx_edac_mc_printk(KERN_ERR, mci,
+				      "Unable to request irq %d for ECC DED",
+				      ded_irq);
+		status = -ENODEV;
+		goto fail1;
+	}
+
+	status = request_irq(sec_irq,
+			     ppc4xx_edac_isr,
+			     0,
+			     "[EDAC] MC ECCSEC",
+			     mci);
+
+	if (status < 0) {
+		ppc4xx_edac_mc_printk(KERN_ERR, mci,
+				      "Unable to request irq %d for ECC SEC",
+				      sec_irq);
+		status = -ENODEV;
+		goto fail2;
+	}
+
+	ppc4xx_edac_mc_printk(KERN_INFO, mci, "ECCDED irq is %d\n", ded_irq);
+	ppc4xx_edac_mc_printk(KERN_INFO, mci, "ECCSEC irq is %d\n", sec_irq);
+
+	pdata->irqs.ded = ded_irq;
+	pdata->irqs.sec = sec_irq;
+
+	return 0;
+
+ fail2:
+	free_irq(sec_irq, mci);
+
+ fail1:
+	free_irq(ded_irq, mci);
+
+ fail:
+	return status;
+}
+
+/**
+ * ppc4xx_edac_map_dcrs - locate and map controller registers
+ * @np: A pointer to the device tree node containing the DCR
+ *      resources to map.
+ * @dcr_host: A pointer to the DCR data to populate with the
+ *            DCR mapping.
+ *
+ * This routine attempts to locate in the device tree and map the DCR
+ * register resources associated with the controller's indirect DCR
+ * address and data windows.
+ *
+ * Returns 0 if the DCRs were successfully mapped; otherwise, < 0 on
+ * error.
+ */
+static int ppc4xx_edac_map_dcrs(const struct device_node *np,
+				dcr_host_t *dcr_host)
+{
+	unsigned int dcr_base, dcr_len;
+
+	if (np == NULL || dcr_host == NULL)
+		return -EINVAL;
+
+	/* Get the DCR resource extent and sanity check the values. */
+
+	dcr_base = dcr_resource_start(np, 0);
+	dcr_len = dcr_resource_len(np, 0);
+
+	if (dcr_base == 0 || dcr_len == 0) {
+		ppc4xx_edac_printk(KERN_ERR,
+				   "Failed to obtain DCR property.\n");
+		return -ENODEV;
+	}
+
+	if (dcr_len != SDRAM_DCR_RESOURCE_LEN) {
+		ppc4xx_edac_printk(KERN_ERR,
+				   "Unexpected DCR length %d, expected %d.\n",
+				   dcr_len, SDRAM_DCR_RESOURCE_LEN);
+		return -ENODEV;
+	}
+
+	/*  Attempt to map the DCR extent. */
+
+	*dcr_host = dcr_map(np, dcr_base, dcr_len);
+
+	if (!DCR_MAP_OK(*dcr_host)) {
+		ppc4xx_edac_printk(KERN_INFO, "Failed to map DCRs.\n");
+		    return -ENODEV;
+	}
+
+	return 0;
+}
+
+/**
+ * ppc4xx_edac_probe - check controller and bind driver
+ * @op: A pointer to the OpenFirmware device tree node associated
+ *      with the controller being probed for driver binding.
+ *
+ * This routine probes a specific ibm,sdram-4xx-ddr2 controller
+ * instance for binding with the driver.
+ *
+ * Returns 0 if the controller instance was successfully bound to the
+ * driver; otherwise, < 0 on error.
+ */
+static int ppc4xx_edac_probe(struct platform_device *op)
+{
+	int status = 0;
+	u32 mcopt1, memcheck;
+	dcr_host_t dcr_host;
+	const struct device_node *np = op->dev.of_node;
+	struct mem_ctl_info *mci = NULL;
+	struct edac_mc_layer layers[2];
+	static int ppc4xx_edac_instance;
+
+	/*
+	 * At this point, we only support the controller realized on
+	 * the AMCC PPC 405EX[r]. Reject anything else.
+	 */
+
+	if (!of_device_is_compatible(np, "ibm,sdram-405ex") &&
+	    !of_device_is_compatible(np, "ibm,sdram-405exr")) {
+		ppc4xx_edac_printk(KERN_NOTICE,
+				   "Only the PPC405EX[r] is supported.\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Next, get the DCR property and attempt to map it so that we
+	 * can probe the controller.
+	 */
+
+	status = ppc4xx_edac_map_dcrs(np, &dcr_host);
+
+	if (status)
+		return status;
+
+	/*
+	 * First determine whether ECC is enabled at all. If not,
+	 * there is no useful checking or monitoring that can be done
+	 * for this controller.
+	 */
+
+	mcopt1 = mfsdram(&dcr_host, SDRAM_MCOPT1);
+	memcheck = (mcopt1 & SDRAM_MCOPT1_MCHK_MASK);
+
+	if (memcheck == SDRAM_MCOPT1_MCHK_NON) {
+		ppc4xx_edac_printk(KERN_INFO, "%pOF: No ECC memory detected or "
+				   "ECC is disabled.\n", np);
+		status = -ENODEV;
+		goto done;
+	}
+
+	/*
+	 * At this point, we know ECC is enabled, allocate an EDAC
+	 * controller instance and perform the appropriate
+	 * initialization.
+	 */
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = ppc4xx_edac_nr_csrows;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = ppc4xx_edac_nr_chans;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(ppc4xx_edac_instance, ARRAY_SIZE(layers), layers,
+			    sizeof(struct ppc4xx_edac_pdata));
+	if (mci == NULL) {
+		ppc4xx_edac_printk(KERN_ERR, "%pOF: "
+				   "Failed to allocate EDAC MC instance!\n",
+				   np);
+		status = -ENOMEM;
+		goto done;
+	}
+
+	status = ppc4xx_edac_mc_init(mci, op, &dcr_host, mcopt1);
+
+	if (status) {
+		ppc4xx_edac_mc_printk(KERN_ERR, mci,
+				      "Failed to initialize instance!\n");
+		goto fail;
+	}
+
+	/*
+	 * We have a valid, initialized EDAC instance bound to the
+	 * controller. Attempt to register it with the EDAC subsystem
+	 * and, if necessary, register interrupts.
+	 */
+
+	if (edac_mc_add_mc(mci)) {
+		ppc4xx_edac_mc_printk(KERN_ERR, mci,
+				      "Failed to add instance!\n");
+		status = -ENODEV;
+		goto fail;
+	}
+
+	if (edac_op_state == EDAC_OPSTATE_INT) {
+		status = ppc4xx_edac_register_irq(op, mci);
+
+		if (status)
+			goto fail1;
+	}
+
+	ppc4xx_edac_instance++;
+
+	return 0;
+
+ fail1:
+	edac_mc_del_mc(mci->pdev);
+
+ fail:
+	edac_mc_free(mci);
+
+ done:
+	return status;
+}
+
+/**
+ * ppc4xx_edac_remove - unbind driver from controller
+ * @op: A pointer to the OpenFirmware device tree node associated
+ *      with the controller this EDAC instance is to be unbound/removed
+ *      from.
+ *
+ * This routine unbinds the EDAC memory controller instance associated
+ * with the specified ibm,sdram-4xx-ddr2 controller described by the
+ * OpenFirmware device tree node passed as a parameter.
+ *
+ * Unconditionally returns 0.
+ */
+static int
+ppc4xx_edac_remove(struct platform_device *op)
+{
+	struct mem_ctl_info *mci = dev_get_drvdata(&op->dev);
+	struct ppc4xx_edac_pdata *pdata = mci->pvt_info;
+
+	if (edac_op_state == EDAC_OPSTATE_INT) {
+		free_irq(pdata->irqs.sec, mci);
+		free_irq(pdata->irqs.ded, mci);
+	}
+
+	dcr_unmap(pdata->dcr_host, SDRAM_DCR_RESOURCE_LEN);
+
+	edac_mc_del_mc(mci->pdev);
+	edac_mc_free(mci);
+
+	return 0;
+}
+
+/**
+ * ppc4xx_edac_opstate_init - initialize EDAC reporting method
+ *
+ * This routine ensures that the EDAC memory controller reporting
+ * method is mapped to a sane value as the EDAC core defines the value
+ * to EDAC_OPSTATE_INVAL by default. We don't call the global
+ * opstate_init as that defaults to polling and we want interrupt as
+ * the default.
+ */
+static inline void __init
+ppc4xx_edac_opstate_init(void)
+{
+	switch (edac_op_state) {
+	case EDAC_OPSTATE_POLL:
+	case EDAC_OPSTATE_INT:
+		break;
+	default:
+		edac_op_state = EDAC_OPSTATE_INT;
+		break;
+	}
+
+	ppc4xx_edac_printk(KERN_INFO, "Reporting type: %s\n",
+			   ((edac_op_state == EDAC_OPSTATE_POLL) ?
+			    EDAC_OPSTATE_POLL_STR :
+			    ((edac_op_state == EDAC_OPSTATE_INT) ?
+			     EDAC_OPSTATE_INT_STR :
+			     EDAC_OPSTATE_UNKNOWN_STR)));
+}
+
+/**
+ * ppc4xx_edac_init - driver/module insertion entry point
+ *
+ * This routine is the driver/module insertion entry point. It
+ * initializes the EDAC memory controller reporting state and
+ * registers the driver as an OpenFirmware device tree platform
+ * driver.
+ */
+static int __init
+ppc4xx_edac_init(void)
+{
+	ppc4xx_edac_printk(KERN_INFO, PPC4XX_EDAC_MODULE_REVISION "\n");
+
+	ppc4xx_edac_opstate_init();
+
+	return platform_driver_register(&ppc4xx_edac_driver);
+}
+
+/**
+ * ppc4xx_edac_exit - driver/module removal entry point
+ *
+ * This routine is the driver/module removal entry point. It
+ * unregisters the driver as an OpenFirmware device tree platform
+ * driver.
+ */
+static void __exit
+ppc4xx_edac_exit(void)
+{
+	platform_driver_unregister(&ppc4xx_edac_driver);
+}
+
+module_init(ppc4xx_edac_init);
+module_exit(ppc4xx_edac_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Grant Erickson <gerickson@nuovations.com>");
+MODULE_DESCRIPTION("EDAC MC Driver for the PPC4xx IBM DDR2 Memory Controller");
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting State: "
+		 "0=" EDAC_OPSTATE_POLL_STR ", 2=" EDAC_OPSTATE_INT_STR);
diff --git a/drivers/edac/ppc4xx_edac.h b/drivers/edac/ppc4xx_edac.h
new file mode 100644
index 000000000..d3154764c
--- /dev/null
+++ b/drivers/edac/ppc4xx_edac.h
@@ -0,0 +1,172 @@
+/*
+ * Copyright (c) 2008 Nuovation System Designs, LLC
+ *   Grant Erickson <gerickson@nuovations.com>
+ *
+ * This file defines processor mnemonics for accessing and managing
+ * the IBM DDR1/DDR2 ECC controller found in the 405EX[r], 440SP,
+ * 440SPe, 460EX, 460GT and 460SX.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#ifndef __PPC4XX_EDAC_H
+#define __PPC4XX_EDAC_H
+
+#include <linux/types.h>
+
+/*
+ * Macro for generating register field mnemonics
+ */
+#define PPC_REG_BITS			32
+#define PPC_REG_VAL(bit, val)		((val) << ((PPC_REG_BITS - 1) - (bit)))
+#define PPC_REG_DECODE(bit, val)	((val) >> ((PPC_REG_BITS - 1) - (bit)))
+
+/*
+ * IBM 4xx DDR1/DDR2 SDRAM memory controller registers (at least those
+ * relevant to ECC)
+ */
+#define SDRAM_BESR			0x00	/* Error status (read/clear) */
+#define SDRAM_BESRT			0x01	/* Error statuss (test/set)  */
+#define SDRAM_BEARL			0x02	/* Error address low	     */
+#define SDRAM_BEARH			0x03	/* Error address high	     */
+#define SDRAM_WMIRQ			0x06	/* Write master (read/clear) */
+#define SDRAM_WMIRQT			0x07	/* Write master (test/set)   */
+#define SDRAM_MCOPT1			0x20	/* Controller options 1	     */
+#define SDRAM_MBXCF_BASE		0x40	/* Bank n configuration base */
+#define	SDRAM_MBXCF(n)			(SDRAM_MBXCF_BASE + (4 * (n)))
+#define SDRAM_MB0CF			SDRAM_MBXCF(0)
+#define SDRAM_MB1CF			SDRAM_MBXCF(1)
+#define SDRAM_MB2CF			SDRAM_MBXCF(2)
+#define SDRAM_MB3CF			SDRAM_MBXCF(3)
+#define SDRAM_ECCCR			0x98	/* ECC error status	     */
+#define SDRAM_ECCES			SDRAM_ECCCR
+
+/*
+ * PLB Master IDs
+ */
+#define	SDRAM_PLB_M0ID_FIRST		0
+#define	SDRAM_PLB_M0ID_ICU		SDRAM_PLB_M0ID_FIRST
+#define	SDRAM_PLB_M0ID_PCIE0		1
+#define	SDRAM_PLB_M0ID_PCIE1		2
+#define	SDRAM_PLB_M0ID_DMA		3
+#define	SDRAM_PLB_M0ID_DCU		4
+#define	SDRAM_PLB_M0ID_OPB		5
+#define	SDRAM_PLB_M0ID_MAL		6
+#define	SDRAM_PLB_M0ID_SEC		7
+#define	SDRAM_PLB_M0ID_AHB		8
+#define SDRAM_PLB_M0ID_LAST		SDRAM_PLB_M0ID_AHB
+#define SDRAM_PLB_M0ID_COUNT		(SDRAM_PLB_M0ID_LAST - \
+					 SDRAM_PLB_M0ID_FIRST + 1)
+
+/*
+ * Memory Controller Bus Error Status Register
+ */
+#define SDRAM_BESR_MASK			PPC_REG_VAL(7, 0xFF)
+#define SDRAM_BESR_M0ID_MASK		PPC_REG_VAL(3, 0xF)
+#define	SDRAM_BESR_M0ID_DECODE(n)	PPC_REG_DECODE(3, n)
+#define SDRAM_BESR_M0ID_ICU		PPC_REG_VAL(3, SDRAM_PLB_M0ID_ICU)
+#define SDRAM_BESR_M0ID_PCIE0		PPC_REG_VAL(3, SDRAM_PLB_M0ID_PCIE0)
+#define SDRAM_BESR_M0ID_PCIE1		PPC_REG_VAL(3, SDRAM_PLB_M0ID_PCIE1)
+#define SDRAM_BESR_M0ID_DMA		PPC_REG_VAL(3, SDRAM_PLB_M0ID_DMA)
+#define SDRAM_BESR_M0ID_DCU		PPC_REG_VAL(3, SDRAM_PLB_M0ID_DCU)
+#define SDRAM_BESR_M0ID_OPB		PPC_REG_VAL(3, SDRAM_PLB_M0ID_OPB)
+#define SDRAM_BESR_M0ID_MAL		PPC_REG_VAL(3, SDRAM_PLB_M0ID_MAL)
+#define SDRAM_BESR_M0ID_SEC		PPC_REG_VAL(3, SDRAM_PLB_M0ID_SEC)
+#define SDRAM_BESR_M0ID_AHB		PPC_REG_VAL(3, SDRAM_PLB_M0ID_AHB)
+#define SDRAM_BESR_M0ET_MASK		PPC_REG_VAL(6, 0x7)
+#define SDRAM_BESR_M0ET_NONE		PPC_REG_VAL(6, 0)
+#define SDRAM_BESR_M0ET_ECC		PPC_REG_VAL(6, 1)
+#define SDRAM_BESR_M0RW_MASK		PPC_REG_VAL(7, 1)
+#define SDRAM_BESR_M0RW_WRITE		PPC_REG_VAL(7, 0)
+#define SDRAM_BESR_M0RW_READ		PPC_REG_VAL(7, 1)
+
+/*
+ * Memory Controller PLB Write Master Interrupt Register
+ */
+#define SDRAM_WMIRQ_MASK		PPC_REG_VAL(8, 0x1FF)
+#define	SDRAM_WMIRQ_ENCODE(id)		PPC_REG_VAL((id % \
+						     SDRAM_PLB_M0ID_COUNT), 1)
+#define SDRAM_WMIRQ_ICU			PPC_REG_VAL(SDRAM_PLB_M0ID_ICU, 1)
+#define SDRAM_WMIRQ_PCIE0		PPC_REG_VAL(SDRAM_PLB_M0ID_PCIE0, 1)
+#define SDRAM_WMIRQ_PCIE1		PPC_REG_VAL(SDRAM_PLB_M0ID_PCIE1, 1)
+#define SDRAM_WMIRQ_DMA			PPC_REG_VAL(SDRAM_PLB_M0ID_DMA, 1)
+#define SDRAM_WMIRQ_DCU			PPC_REG_VAL(SDRAM_PLB_M0ID_DCU, 1)
+#define SDRAM_WMIRQ_OPB			PPC_REG_VAL(SDRAM_PLB_M0ID_OPB, 1)
+#define SDRAM_WMIRQ_MAL			PPC_REG_VAL(SDRAM_PLB_M0ID_MAL, 1)
+#define SDRAM_WMIRQ_SEC			PPC_REG_VAL(SDRAM_PLB_M0ID_SEC, 1)
+#define SDRAM_WMIRQ_AHB			PPC_REG_VAL(SDRAM_PLB_M0ID_AHB, 1)
+
+/*
+ * Memory Controller Options 1 Register
+ */
+#define SDRAM_MCOPT1_MCHK_MASK	    PPC_REG_VAL(3, 0x3)	 /* ECC mask	     */
+#define SDRAM_MCOPT1_MCHK_NON	    PPC_REG_VAL(3, 0x0)	 /* No ECC gen	     */
+#define SDRAM_MCOPT1_MCHK_GEN	    PPC_REG_VAL(3, 0x2)	 /* ECC gen	     */
+#define SDRAM_MCOPT1_MCHK_CHK	    PPC_REG_VAL(3, 0x1)	 /* ECC gen and chk  */
+#define SDRAM_MCOPT1_MCHK_CHK_REP   PPC_REG_VAL(3, 0x3)	 /* ECC gen/chk/rpt  */
+#define SDRAM_MCOPT1_MCHK_DECODE(n) ((((u32)(n)) >> 28) & 0x3)
+#define SDRAM_MCOPT1_RDEN_MASK	    PPC_REG_VAL(4, 0x1)	 /* Rgstrd DIMM mask */
+#define SDRAM_MCOPT1_RDEN	    PPC_REG_VAL(4, 0x1)	 /* Rgstrd DIMM enbl */
+#define SDRAM_MCOPT1_WDTH_MASK	    PPC_REG_VAL(7, 0x1)	 /* Width mask	     */
+#define SDRAM_MCOPT1_WDTH_32	    PPC_REG_VAL(7, 0x0)	 /* 32 bits	     */
+#define SDRAM_MCOPT1_WDTH_16	    PPC_REG_VAL(7, 0x1)	 /* 16 bits	     */
+#define SDRAM_MCOPT1_DDR_TYPE_MASK  PPC_REG_VAL(11, 0x1) /* DDR type mask    */
+#define SDRAM_MCOPT1_DDR1_TYPE	    PPC_REG_VAL(11, 0x0) /* DDR1 type	     */
+#define SDRAM_MCOPT1_DDR2_TYPE	    PPC_REG_VAL(11, 0x1) /* DDR2 type	     */
+
+/*
+ * Memory Bank 0 - n Configuration Register
+ */
+#define SDRAM_MBCF_BA_MASK		PPC_REG_VAL(12, 0x1FFF)
+#define SDRAM_MBCF_SZ_MASK		PPC_REG_VAL(19, 0xF)
+#define SDRAM_MBCF_SZ_DECODE(mbxcf)	PPC_REG_DECODE(19, mbxcf)
+#define SDRAM_MBCF_SZ_4MB		PPC_REG_VAL(19, 0x0)
+#define SDRAM_MBCF_SZ_8MB		PPC_REG_VAL(19, 0x1)
+#define SDRAM_MBCF_SZ_16MB		PPC_REG_VAL(19, 0x2)
+#define SDRAM_MBCF_SZ_32MB		PPC_REG_VAL(19, 0x3)
+#define SDRAM_MBCF_SZ_64MB		PPC_REG_VAL(19, 0x4)
+#define SDRAM_MBCF_SZ_128MB		PPC_REG_VAL(19, 0x5)
+#define SDRAM_MBCF_SZ_256MB		PPC_REG_VAL(19, 0x6)
+#define SDRAM_MBCF_SZ_512MB		PPC_REG_VAL(19, 0x7)
+#define SDRAM_MBCF_SZ_1GB		PPC_REG_VAL(19, 0x8)
+#define SDRAM_MBCF_SZ_2GB		PPC_REG_VAL(19, 0x9)
+#define SDRAM_MBCF_SZ_4GB		PPC_REG_VAL(19, 0xA)
+#define SDRAM_MBCF_SZ_8GB		PPC_REG_VAL(19, 0xB)
+#define SDRAM_MBCF_AM_MASK		PPC_REG_VAL(23, 0xF)
+#define SDRAM_MBCF_AM_MODE0		PPC_REG_VAL(23, 0x0)
+#define SDRAM_MBCF_AM_MODE1		PPC_REG_VAL(23, 0x1)
+#define SDRAM_MBCF_AM_MODE2		PPC_REG_VAL(23, 0x2)
+#define SDRAM_MBCF_AM_MODE3		PPC_REG_VAL(23, 0x3)
+#define SDRAM_MBCF_AM_MODE4		PPC_REG_VAL(23, 0x4)
+#define SDRAM_MBCF_AM_MODE5		PPC_REG_VAL(23, 0x5)
+#define SDRAM_MBCF_AM_MODE6		PPC_REG_VAL(23, 0x6)
+#define SDRAM_MBCF_AM_MODE7		PPC_REG_VAL(23, 0x7)
+#define SDRAM_MBCF_AM_MODE8		PPC_REG_VAL(23, 0x8)
+#define SDRAM_MBCF_AM_MODE9		PPC_REG_VAL(23, 0x9)
+#define SDRAM_MBCF_BE_MASK		PPC_REG_VAL(31, 0x1)
+#define SDRAM_MBCF_BE_DISABLE		PPC_REG_VAL(31, 0x0)
+#define SDRAM_MBCF_BE_ENABLE		PPC_REG_VAL(31, 0x1)
+
+/*
+ * ECC Error Status
+ */
+#define SDRAM_ECCES_MASK		PPC_REG_VAL(21, 0x3FFFFF)
+#define SDRAM_ECCES_BNCE_MASK		PPC_REG_VAL(15, 0xFFFF)
+#define SDRAM_ECCES_BNCE_ENCODE(lane)	PPC_REG_VAL(((lane) & 0xF), 1)
+#define SDRAM_ECCES_CKBER_MASK		PPC_REG_VAL(17, 0x3)
+#define SDRAM_ECCES_CKBER_NONE		PPC_REG_VAL(17, 0)
+#define SDRAM_ECCES_CKBER_16_ECC_0_3	PPC_REG_VAL(17, 2)
+#define SDRAM_ECCES_CKBER_32_ECC_0_3	PPC_REG_VAL(17, 1)
+#define SDRAM_ECCES_CKBER_32_ECC_4_8	PPC_REG_VAL(17, 2)
+#define SDRAM_ECCES_CKBER_32_ECC_0_8	PPC_REG_VAL(17, 3)
+#define SDRAM_ECCES_CE			PPC_REG_VAL(18, 1)
+#define SDRAM_ECCES_UE			PPC_REG_VAL(19, 1)
+#define SDRAM_ECCES_BKNER_MASK		PPC_REG_VAL(21, 0x3)
+#define SDRAM_ECCES_BK0ER		PPC_REG_VAL(20, 1)
+#define SDRAM_ECCES_BK1ER		PPC_REG_VAL(21, 1)
+
+#endif /* __PPC4XX_EDAC_H */
diff --git a/drivers/edac/r82600_edac.c b/drivers/edac/r82600_edac.c
new file mode 100644
index 000000000..851e53e12
--- /dev/null
+++ b/drivers/edac/r82600_edac.c
@@ -0,0 +1,428 @@
+/*
+ * Radisys 82600 Embedded chipset Memory Controller kernel module
+ * (C) 2005 EADS Astrium
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * Written by Tim Small <tim@buttersideup.com>, based on work by Thayne
+ * Harbaugh, Dan Hollis <goemon at anime dot net> and others.
+ *
+ * $Id: edac_r82600.c,v 1.1.2.6 2005/10/05 00:43:44 dsp_llnl Exp $
+ *
+ * Written with reference to 82600 High Integration Dual PCI System
+ * Controller Data Book:
+ * www.radisys.com/files/support_downloads/007-01277-0002.82600DataBook.pdf
+ * references to this document given in []
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/edac.h>
+#include "edac_module.h"
+
+#define EDAC_MOD_STR	"r82600_edac"
+
+#define r82600_printk(level, fmt, arg...) \
+	edac_printk(level, "r82600", fmt, ##arg)
+
+#define r82600_mc_printk(mci, level, fmt, arg...) \
+	edac_mc_chipset_printk(mci, level, "r82600", fmt, ##arg)
+
+/* Radisys say "The 82600 integrates a main memory SDRAM controller that
+ * supports up to four banks of memory. The four banks can support a mix of
+ * sizes of 64 bit wide (72 bits with ECC) Synchronous DRAM (SDRAM) DIMMs,
+ * each of which can be any size from 16MB to 512MB. Both registered (control
+ * signals buffered) and unbuffered DIMM types are supported. Mixing of
+ * registered and unbuffered DIMMs as well as mixing of ECC and non-ECC DIMMs
+ * is not allowed. The 82600 SDRAM interface operates at the same frequency as
+ * the CPU bus, 66MHz, 100MHz or 133MHz."
+ */
+
+#define R82600_NR_CSROWS 4
+#define R82600_NR_CHANS  1
+#define R82600_NR_DIMMS  4
+
+#define R82600_BRIDGE_ID  0x8200
+
+/* Radisys 82600 register addresses - device 0 function 0 - PCI bridge */
+#define R82600_DRAMC	0x57	/* Various SDRAM related control bits
+				 * all bits are R/W
+				 *
+				 * 7    SDRAM ISA Hole Enable
+				 * 6    Flash Page Mode Enable
+				 * 5    ECC Enable: 1=ECC 0=noECC
+				 * 4    DRAM DIMM Type: 1=
+				 * 3    BIOS Alias Disable
+				 * 2    SDRAM BIOS Flash Write Enable
+				 * 1:0  SDRAM Refresh Rate: 00=Disabled
+				 *          01=7.8usec (256Mbit SDRAMs)
+				 *          10=15.6us 11=125usec
+				 */
+
+#define R82600_SDRAMC	0x76	/* "SDRAM Control Register"
+				 * More SDRAM related control bits
+				 * all bits are R/W
+				 *
+				 * 15:8 Reserved.
+				 *
+				 * 7:5  Special SDRAM Mode Select
+				 *
+				 * 4    Force ECC
+				 *
+				 *        1=Drive ECC bits to 0 during
+				 *          write cycles (i.e. ECC test mode)
+				 *
+				 *        0=Normal ECC functioning
+				 *
+				 * 3    Enhanced Paging Enable
+				 *
+				 * 2    CAS# Latency 0=3clks 1=2clks
+				 *
+				 * 1    RAS# to CAS# Delay 0=3 1=2
+				 *
+				 * 0    RAS# Precharge     0=3 1=2
+				 */
+
+#define R82600_EAP	0x80	/* ECC Error Address Pointer Register
+				 *
+				 * 31    Disable Hardware Scrubbing (RW)
+				 *        0=Scrub on corrected read
+				 *        1=Don't scrub on corrected read
+				 *
+				 * 30:12 Error Address Pointer (RO)
+				 *        Upper 19 bits of error address
+				 *
+				 * 11:4  Syndrome Bits (RO)
+				 *
+				 * 3     BSERR# on multibit error (RW)
+				 *        1=enable 0=disable
+				 *
+				 * 2     NMI on Single Bit Eror (RW)
+				 *        1=NMI triggered by SBE n.b. other
+				 *          prerequeists
+				 *        0=NMI not triggered
+				 *
+				 * 1     MBE (R/WC)
+				 *        read 1=MBE at EAP (see above)
+				 *        read 0=no MBE, or SBE occurred first
+				 *        write 1=Clear MBE status (must also
+				 *          clear SBE)
+				 *        write 0=NOP
+				 *
+				 * 1     SBE (R/WC)
+				 *        read 1=SBE at EAP (see above)
+				 *        read 0=no SBE, or MBE occurred first
+				 *        write 1=Clear SBE status (must also
+				 *          clear MBE)
+				 *        write 0=NOP
+				 */
+
+#define R82600_DRBA	0x60	/* + 0x60..0x63 SDRAM Row Boundary Address
+				 *  Registers
+				 *
+				 * 7:0  Address lines 30:24 - upper limit of
+				 * each row [p57]
+				 */
+
+struct r82600_error_info {
+	u32 eapr;
+};
+
+static bool disable_hardware_scrub;
+
+static struct edac_pci_ctl_info *r82600_pci;
+
+static void r82600_get_error_info(struct mem_ctl_info *mci,
+				struct r82600_error_info *info)
+{
+	struct pci_dev *pdev;
+
+	pdev = to_pci_dev(mci->pdev);
+	pci_read_config_dword(pdev, R82600_EAP, &info->eapr);
+
+	if (info->eapr & BIT(0))
+		/* Clear error to allow next error to be reported [p.62] */
+		pci_write_bits32(pdev, R82600_EAP,
+				 ((u32) BIT(0) & (u32) BIT(1)),
+				 ((u32) BIT(0) & (u32) BIT(1)));
+
+	if (info->eapr & BIT(1))
+		/* Clear error to allow next error to be reported [p.62] */
+		pci_write_bits32(pdev, R82600_EAP,
+				 ((u32) BIT(0) & (u32) BIT(1)),
+				 ((u32) BIT(0) & (u32) BIT(1)));
+}
+
+static int r82600_process_error_info(struct mem_ctl_info *mci,
+				struct r82600_error_info *info,
+				int handle_errors)
+{
+	int error_found;
+	u32 eapaddr, page;
+	u32 syndrome;
+
+	error_found = 0;
+
+	/* bits 30:12 store the upper 19 bits of the 32 bit error address */
+	eapaddr = ((info->eapr >> 12) & 0x7FFF) << 13;
+	/* Syndrome in bits 11:4 [p.62]       */
+	syndrome = (info->eapr >> 4) & 0xFF;
+
+	/* the R82600 reports at less than page *
+	 * granularity (upper 19 bits only)     */
+	page = eapaddr >> PAGE_SHIFT;
+
+	if (info->eapr & BIT(0)) {	/* CE? */
+		error_found = 1;
+
+		if (handle_errors)
+			edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+					     page, 0, syndrome,
+					     edac_mc_find_csrow_by_page(mci, page),
+					     0, -1,
+					     mci->ctl_name, "");
+	}
+
+	if (info->eapr & BIT(1)) {	/* UE? */
+		error_found = 1;
+
+		if (handle_errors)
+			/* 82600 doesn't give enough info */
+			edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+					     page, 0, 0,
+					     edac_mc_find_csrow_by_page(mci, page),
+					     0, -1,
+					     mci->ctl_name, "");
+	}
+
+	return error_found;
+}
+
+static void r82600_check(struct mem_ctl_info *mci)
+{
+	struct r82600_error_info info;
+
+	edac_dbg(1, "MC%d\n", mci->mc_idx);
+	r82600_get_error_info(mci, &info);
+	r82600_process_error_info(mci, &info, 1);
+}
+
+static inline int ecc_enabled(u8 dramcr)
+{
+	return dramcr & BIT(5);
+}
+
+static void r82600_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
+			u8 dramcr)
+{
+	struct csrow_info *csrow;
+	struct dimm_info *dimm;
+	int index;
+	u8 drbar;		/* SDRAM Row Boundary Address Register */
+	u32 row_high_limit, row_high_limit_last;
+	u32 reg_sdram, ecc_on, row_base;
+
+	ecc_on = ecc_enabled(dramcr);
+	reg_sdram = dramcr & BIT(4);
+	row_high_limit_last = 0;
+
+	for (index = 0; index < mci->nr_csrows; index++) {
+		csrow = mci->csrows[index];
+		dimm = csrow->channels[0]->dimm;
+
+		/* find the DRAM Chip Select Base address and mask */
+		pci_read_config_byte(pdev, R82600_DRBA + index, &drbar);
+
+		edac_dbg(1, "Row=%d DRBA = %#0x\n", index, drbar);
+
+		row_high_limit = ((u32) drbar << 24);
+/*		row_high_limit = ((u32)drbar << 24) | 0xffffffUL; */
+
+		edac_dbg(1, "Row=%d, Boundary Address=%#0x, Last = %#0x\n",
+			 index, row_high_limit, row_high_limit_last);
+
+		/* Empty row [p.57] */
+		if (row_high_limit == row_high_limit_last)
+			continue;
+
+		row_base = row_high_limit_last;
+
+		csrow->first_page = row_base >> PAGE_SHIFT;
+		csrow->last_page = (row_high_limit >> PAGE_SHIFT) - 1;
+
+		dimm->nr_pages = csrow->last_page - csrow->first_page + 1;
+		/* Error address is top 19 bits - so granularity is      *
+		 * 14 bits                                               */
+		dimm->grain = 1 << 14;
+		dimm->mtype = reg_sdram ? MEM_RDDR : MEM_DDR;
+		/* FIXME - check that this is unknowable with this chipset */
+		dimm->dtype = DEV_UNKNOWN;
+
+		/* Mode is global on 82600 */
+		dimm->edac_mode = ecc_on ? EDAC_SECDED : EDAC_NONE;
+		row_high_limit_last = row_high_limit;
+	}
+}
+
+static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
+{
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[2];
+	u8 dramcr;
+	u32 eapr;
+	u32 scrub_disabled;
+	u32 sdram_refresh_rate;
+	struct r82600_error_info discard;
+
+	edac_dbg(0, "\n");
+	pci_read_config_byte(pdev, R82600_DRAMC, &dramcr);
+	pci_read_config_dword(pdev, R82600_EAP, &eapr);
+	scrub_disabled = eapr & BIT(31);
+	sdram_refresh_rate = dramcr & (BIT(0) | BIT(1));
+	edac_dbg(2, "sdram refresh rate = %#0x\n", sdram_refresh_rate);
+	edac_dbg(2, "DRAMC register = %#0x\n", dramcr);
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = R82600_NR_CSROWS;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = R82600_NR_CHANS;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0);
+	if (mci == NULL)
+		return -ENOMEM;
+
+	edac_dbg(0, "mci = %p\n", mci);
+	mci->pdev = &pdev->dev;
+	mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_DDR;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
+	/* FIXME try to work out if the chip leads have been used for COM2
+	 * instead on this board? [MA6?] MAYBE:
+	 */
+
+	/* On the R82600, the pins for memory bits 72:65 - i.e. the   *
+	 * EC bits are shared with the pins for COM2 (!), so if COM2  *
+	 * is enabled, we assume COM2 is wired up, and thus no EDAC   *
+	 * is possible.                                               */
+	mci->edac_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
+
+	if (ecc_enabled(dramcr)) {
+		if (scrub_disabled)
+			edac_dbg(3, "mci = %p - Scrubbing disabled! EAP: %#0x\n",
+				 mci, eapr);
+	} else
+		mci->edac_cap = EDAC_FLAG_NONE;
+
+	mci->mod_name = EDAC_MOD_STR;
+	mci->ctl_name = "R82600";
+	mci->dev_name = pci_name(pdev);
+	mci->edac_check = r82600_check;
+	mci->ctl_page_to_phys = NULL;
+	r82600_init_csrows(mci, pdev, dramcr);
+	r82600_get_error_info(mci, &discard);	/* clear counters */
+
+	/* Here we assume that we will never see multiple instances of this
+	 * type of memory controller.  The ID is therefore hardcoded to 0.
+	 */
+	if (edac_mc_add_mc(mci)) {
+		edac_dbg(3, "failed edac_mc_add_mc()\n");
+		goto fail;
+	}
+
+	/* get this far and it's successful */
+
+	if (disable_hardware_scrub) {
+		edac_dbg(3, "Disabling Hardware Scrub (scrub on error)\n");
+		pci_write_bits32(pdev, R82600_EAP, BIT(31), BIT(31));
+	}
+
+	/* allocating generic PCI control info */
+	r82600_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
+	if (!r82600_pci) {
+		printk(KERN_WARNING
+			"%s(): Unable to create PCI control\n",
+			__func__);
+		printk(KERN_WARNING
+			"%s(): PCI error report via EDAC not setup\n",
+			__func__);
+	}
+
+	edac_dbg(3, "success\n");
+	return 0;
+
+fail:
+	edac_mc_free(mci);
+	return -ENODEV;
+}
+
+/* returns count (>= 0), or negative on error */
+static int r82600_init_one(struct pci_dev *pdev,
+			   const struct pci_device_id *ent)
+{
+	edac_dbg(0, "\n");
+
+	/* don't need to call pci_enable_device() */
+	return r82600_probe1(pdev, ent->driver_data);
+}
+
+static void r82600_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+
+	edac_dbg(0, "\n");
+
+	if (r82600_pci)
+		edac_pci_release_generic_ctl(r82600_pci);
+
+	if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
+		return;
+
+	edac_mc_free(mci);
+}
+
+static const struct pci_device_id r82600_pci_tbl[] = {
+	{
+	 PCI_DEVICE(PCI_VENDOR_ID_RADISYS, R82600_BRIDGE_ID)
+	 },
+	{
+	 0,
+	 }			/* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, r82600_pci_tbl);
+
+static struct pci_driver r82600_driver = {
+	.name = EDAC_MOD_STR,
+	.probe = r82600_init_one,
+	.remove = r82600_remove_one,
+	.id_table = r82600_pci_tbl,
+};
+
+static int __init r82600_init(void)
+{
+       /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+       opstate_init();
+
+	return pci_register_driver(&r82600_driver);
+}
+
+static void __exit r82600_exit(void)
+{
+	pci_unregister_driver(&r82600_driver);
+}
+
+module_init(r82600_init);
+module_exit(r82600_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Tim Small <tim@buttersideup.com> - WPAD Ltd. "
+		"on behalf of EADS Astrium");
+MODULE_DESCRIPTION("MC support for Radisys 82600 memory controllers");
+
+module_param(disable_hardware_scrub, bool, 0644);
+MODULE_PARM_DESC(disable_hardware_scrub,
+		 "If set, disable the chipset's automatic scrub for CEs");
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
new file mode 100644
index 000000000..f90feb0c4
--- /dev/null
+++ b/drivers/edac/sb_edac.c
@@ -0,0 +1,3465 @@
+/* Intel Sandy Bridge -EN/-EP/-EX Memory Controller kernel module
+ *
+ * This driver supports the memory controllers found on the Intel
+ * processor family Sandy Bridge.
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2 only.
+ *
+ * Copyright (c) 2011 by:
+ *	 Mauro Carvalho Chehab
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/edac.h>
+#include <linux/mmzone.h>
+#include <linux/smp.h>
+#include <linux/bitmap.h>
+#include <linux/math64.h>
+#include <linux/mod_devicetable.h>
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+#include <asm/processor.h>
+#include <asm/mce.h>
+
+#include "edac_module.h"
+
+/* Static vars */
+static LIST_HEAD(sbridge_edac_list);
+
+/*
+ * Alter this version for the module when modifications are made
+ */
+#define SBRIDGE_REVISION    " Ver: 1.1.2 "
+#define EDAC_MOD_STR	    "sb_edac"
+
+/*
+ * Debug macros
+ */
+#define sbridge_printk(level, fmt, arg...)			\
+	edac_printk(level, "sbridge", fmt, ##arg)
+
+#define sbridge_mc_printk(mci, level, fmt, arg...)		\
+	edac_mc_chipset_printk(mci, level, "sbridge", fmt, ##arg)
+
+/*
+ * Get a bit field at register value <v>, from bit <lo> to bit <hi>
+ */
+#define GET_BITFIELD(v, lo, hi)	\
+	(((v) & GENMASK_ULL(hi, lo)) >> (lo))
+
+/* Devices 12 Function 6, Offsets 0x80 to 0xcc */
+static const u32 sbridge_dram_rule[] = {
+	0x80, 0x88, 0x90, 0x98, 0xa0,
+	0xa8, 0xb0, 0xb8, 0xc0, 0xc8,
+};
+
+static const u32 ibridge_dram_rule[] = {
+	0x60, 0x68, 0x70, 0x78, 0x80,
+	0x88, 0x90, 0x98, 0xa0,	0xa8,
+	0xb0, 0xb8, 0xc0, 0xc8, 0xd0,
+	0xd8, 0xe0, 0xe8, 0xf0, 0xf8,
+};
+
+static const u32 knl_dram_rule[] = {
+	0x60, 0x68, 0x70, 0x78, 0x80, /* 0-4 */
+	0x88, 0x90, 0x98, 0xa0, 0xa8, /* 5-9 */
+	0xb0, 0xb8, 0xc0, 0xc8, 0xd0, /* 10-14 */
+	0xd8, 0xe0, 0xe8, 0xf0, 0xf8, /* 15-19 */
+	0x100, 0x108, 0x110, 0x118,   /* 20-23 */
+};
+
+#define DRAM_RULE_ENABLE(reg)	GET_BITFIELD(reg, 0,  0)
+#define A7MODE(reg)		GET_BITFIELD(reg, 26, 26)
+
+static char *show_dram_attr(u32 attr)
+{
+	switch (attr) {
+		case 0:
+			return "DRAM";
+		case 1:
+			return "MMCFG";
+		case 2:
+			return "NXM";
+		default:
+			return "unknown";
+	}
+}
+
+static const u32 sbridge_interleave_list[] = {
+	0x84, 0x8c, 0x94, 0x9c, 0xa4,
+	0xac, 0xb4, 0xbc, 0xc4, 0xcc,
+};
+
+static const u32 ibridge_interleave_list[] = {
+	0x64, 0x6c, 0x74, 0x7c, 0x84,
+	0x8c, 0x94, 0x9c, 0xa4, 0xac,
+	0xb4, 0xbc, 0xc4, 0xcc, 0xd4,
+	0xdc, 0xe4, 0xec, 0xf4, 0xfc,
+};
+
+static const u32 knl_interleave_list[] = {
+	0x64, 0x6c, 0x74, 0x7c, 0x84, /* 0-4 */
+	0x8c, 0x94, 0x9c, 0xa4, 0xac, /* 5-9 */
+	0xb4, 0xbc, 0xc4, 0xcc, 0xd4, /* 10-14 */
+	0xdc, 0xe4, 0xec, 0xf4, 0xfc, /* 15-19 */
+	0x104, 0x10c, 0x114, 0x11c,   /* 20-23 */
+};
+#define MAX_INTERLEAVE							\
+	(max_t(unsigned int, ARRAY_SIZE(sbridge_interleave_list),	\
+	       max_t(unsigned int, ARRAY_SIZE(ibridge_interleave_list),	\
+		     ARRAY_SIZE(knl_interleave_list))))
+
+struct interleave_pkg {
+	unsigned char start;
+	unsigned char end;
+};
+
+static const struct interleave_pkg sbridge_interleave_pkg[] = {
+	{ 0, 2 },
+	{ 3, 5 },
+	{ 8, 10 },
+	{ 11, 13 },
+	{ 16, 18 },
+	{ 19, 21 },
+	{ 24, 26 },
+	{ 27, 29 },
+};
+
+static const struct interleave_pkg ibridge_interleave_pkg[] = {
+	{ 0, 3 },
+	{ 4, 7 },
+	{ 8, 11 },
+	{ 12, 15 },
+	{ 16, 19 },
+	{ 20, 23 },
+	{ 24, 27 },
+	{ 28, 31 },
+};
+
+static inline int sad_pkg(const struct interleave_pkg *table, u32 reg,
+			  int interleave)
+{
+	return GET_BITFIELD(reg, table[interleave].start,
+			    table[interleave].end);
+}
+
+/* Devices 12 Function 7 */
+
+#define TOLM		0x80
+#define TOHM		0x84
+#define HASWELL_TOLM	0xd0
+#define HASWELL_TOHM_0	0xd4
+#define HASWELL_TOHM_1	0xd8
+#define KNL_TOLM	0xd0
+#define KNL_TOHM_0	0xd4
+#define KNL_TOHM_1	0xd8
+
+#define GET_TOLM(reg)		((GET_BITFIELD(reg, 0,  3) << 28) | 0x3ffffff)
+#define GET_TOHM(reg)		((GET_BITFIELD(reg, 0, 20) << 25) | 0x3ffffff)
+
+/* Device 13 Function 6 */
+
+#define SAD_TARGET	0xf0
+
+#define SOURCE_ID(reg)		GET_BITFIELD(reg, 9, 11)
+
+#define SOURCE_ID_KNL(reg)	GET_BITFIELD(reg, 12, 14)
+
+#define SAD_CONTROL	0xf4
+
+/* Device 14 function 0 */
+
+static const u32 tad_dram_rule[] = {
+	0x40, 0x44, 0x48, 0x4c,
+	0x50, 0x54, 0x58, 0x5c,
+	0x60, 0x64, 0x68, 0x6c,
+};
+#define MAX_TAD	ARRAY_SIZE(tad_dram_rule)
+
+#define TAD_LIMIT(reg)		((GET_BITFIELD(reg, 12, 31) << 26) | 0x3ffffff)
+#define TAD_SOCK(reg)		GET_BITFIELD(reg, 10, 11)
+#define TAD_CH(reg)		GET_BITFIELD(reg,  8,  9)
+#define TAD_TGT3(reg)		GET_BITFIELD(reg,  6,  7)
+#define TAD_TGT2(reg)		GET_BITFIELD(reg,  4,  5)
+#define TAD_TGT1(reg)		GET_BITFIELD(reg,  2,  3)
+#define TAD_TGT0(reg)		GET_BITFIELD(reg,  0,  1)
+
+/* Device 15, function 0 */
+
+#define MCMTR			0x7c
+#define KNL_MCMTR		0x624
+
+#define IS_ECC_ENABLED(mcmtr)		GET_BITFIELD(mcmtr, 2, 2)
+#define IS_LOCKSTEP_ENABLED(mcmtr)	GET_BITFIELD(mcmtr, 1, 1)
+#define IS_CLOSE_PG(mcmtr)		GET_BITFIELD(mcmtr, 0, 0)
+
+/* Device 15, function 1 */
+
+#define RASENABLES		0xac
+#define IS_MIRROR_ENABLED(reg)		GET_BITFIELD(reg, 0, 0)
+
+/* Device 15, functions 2-5 */
+
+static const int mtr_regs[] = {
+	0x80, 0x84, 0x88,
+};
+
+static const int knl_mtr_reg = 0xb60;
+
+#define RANK_DISABLE(mtr)		GET_BITFIELD(mtr, 16, 19)
+#define IS_DIMM_PRESENT(mtr)		GET_BITFIELD(mtr, 14, 14)
+#define RANK_CNT_BITS(mtr)		GET_BITFIELD(mtr, 12, 13)
+#define RANK_WIDTH_BITS(mtr)		GET_BITFIELD(mtr, 2, 4)
+#define COL_WIDTH_BITS(mtr)		GET_BITFIELD(mtr, 0, 1)
+
+static const u32 tad_ch_nilv_offset[] = {
+	0x90, 0x94, 0x98, 0x9c,
+	0xa0, 0xa4, 0xa8, 0xac,
+	0xb0, 0xb4, 0xb8, 0xbc,
+};
+#define CHN_IDX_OFFSET(reg)		GET_BITFIELD(reg, 28, 29)
+#define TAD_OFFSET(reg)			(GET_BITFIELD(reg,  6, 25) << 26)
+
+static const u32 rir_way_limit[] = {
+	0x108, 0x10c, 0x110, 0x114, 0x118,
+};
+#define MAX_RIR_RANGES ARRAY_SIZE(rir_way_limit)
+
+#define IS_RIR_VALID(reg)	GET_BITFIELD(reg, 31, 31)
+#define RIR_WAY(reg)		GET_BITFIELD(reg, 28, 29)
+
+#define MAX_RIR_WAY	8
+
+static const u32 rir_offset[MAX_RIR_RANGES][MAX_RIR_WAY] = {
+	{ 0x120, 0x124, 0x128, 0x12c, 0x130, 0x134, 0x138, 0x13c },
+	{ 0x140, 0x144, 0x148, 0x14c, 0x150, 0x154, 0x158, 0x15c },
+	{ 0x160, 0x164, 0x168, 0x16c, 0x170, 0x174, 0x178, 0x17c },
+	{ 0x180, 0x184, 0x188, 0x18c, 0x190, 0x194, 0x198, 0x19c },
+	{ 0x1a0, 0x1a4, 0x1a8, 0x1ac, 0x1b0, 0x1b4, 0x1b8, 0x1bc },
+};
+
+#define RIR_RNK_TGT(type, reg) (((type) == BROADWELL) ? \
+	GET_BITFIELD(reg, 20, 23) : GET_BITFIELD(reg, 16, 19))
+
+#define RIR_OFFSET(type, reg) (((type) == HASWELL || (type) == BROADWELL) ? \
+	GET_BITFIELD(reg,  2, 15) : GET_BITFIELD(reg,  2, 14))
+
+/* Device 16, functions 2-7 */
+
+/*
+ * FIXME: Implement the error count reads directly
+ */
+
+static const u32 correrrcnt[] = {
+	0x104, 0x108, 0x10c, 0x110,
+};
+
+#define RANK_ODD_OV(reg)		GET_BITFIELD(reg, 31, 31)
+#define RANK_ODD_ERR_CNT(reg)		GET_BITFIELD(reg, 16, 30)
+#define RANK_EVEN_OV(reg)		GET_BITFIELD(reg, 15, 15)
+#define RANK_EVEN_ERR_CNT(reg)		GET_BITFIELD(reg,  0, 14)
+
+static const u32 correrrthrsld[] = {
+	0x11c, 0x120, 0x124, 0x128,
+};
+
+#define RANK_ODD_ERR_THRSLD(reg)	GET_BITFIELD(reg, 16, 30)
+#define RANK_EVEN_ERR_THRSLD(reg)	GET_BITFIELD(reg,  0, 14)
+
+
+/* Device 17, function 0 */
+
+#define SB_RANK_CFG_A		0x0328
+
+#define IB_RANK_CFG_A		0x0320
+
+/*
+ * sbridge structs
+ */
+
+#define NUM_CHANNELS		6	/* Max channels per MC */
+#define MAX_DIMMS		3	/* Max DIMMS per channel */
+#define KNL_MAX_CHAS		38	/* KNL max num. of Cache Home Agents */
+#define KNL_MAX_CHANNELS	6	/* KNL max num. of PCI channels */
+#define KNL_MAX_EDCS		8	/* Embedded DRAM controllers */
+#define CHANNEL_UNSPECIFIED	0xf	/* Intel IA32 SDM 15-14 */
+
+enum type {
+	SANDY_BRIDGE,
+	IVY_BRIDGE,
+	HASWELL,
+	BROADWELL,
+	KNIGHTS_LANDING,
+};
+
+enum domain {
+	IMC0 = 0,
+	IMC1,
+	SOCK,
+};
+
+enum mirroring_mode {
+	NON_MIRRORING,
+	ADDR_RANGE_MIRRORING,
+	FULL_MIRRORING,
+};
+
+struct sbridge_pvt;
+struct sbridge_info {
+	enum type	type;
+	u32		mcmtr;
+	u32		rankcfgr;
+	u64		(*get_tolm)(struct sbridge_pvt *pvt);
+	u64		(*get_tohm)(struct sbridge_pvt *pvt);
+	u64		(*rir_limit)(u32 reg);
+	u64		(*sad_limit)(u32 reg);
+	u32		(*interleave_mode)(u32 reg);
+	u32		(*dram_attr)(u32 reg);
+	const u32	*dram_rule;
+	const u32	*interleave_list;
+	const struct interleave_pkg *interleave_pkg;
+	u8		max_sad;
+	u8		(*get_node_id)(struct sbridge_pvt *pvt);
+	enum mem_type	(*get_memory_type)(struct sbridge_pvt *pvt);
+	enum dev_type	(*get_width)(struct sbridge_pvt *pvt, u32 mtr);
+	struct pci_dev	*pci_vtd;
+};
+
+struct sbridge_channel {
+	u32		ranks;
+	u32		dimms;
+};
+
+struct pci_id_descr {
+	int			dev_id;
+	int			optional;
+	enum domain		dom;
+};
+
+struct pci_id_table {
+	const struct pci_id_descr	*descr;
+	int				n_devs_per_imc;
+	int				n_devs_per_sock;
+	int				n_imcs_per_sock;
+	enum type			type;
+};
+
+struct sbridge_dev {
+	struct list_head	list;
+	int			seg;
+	u8			bus, mc;
+	u8			node_id, source_id;
+	struct pci_dev		**pdev;
+	enum domain		dom;
+	int			n_devs;
+	int			i_devs;
+	struct mem_ctl_info	*mci;
+};
+
+struct knl_pvt {
+	struct pci_dev          *pci_cha[KNL_MAX_CHAS];
+	struct pci_dev          *pci_channel[KNL_MAX_CHANNELS];
+	struct pci_dev          *pci_mc0;
+	struct pci_dev          *pci_mc1;
+	struct pci_dev          *pci_mc0_misc;
+	struct pci_dev          *pci_mc1_misc;
+	struct pci_dev          *pci_mc_info; /* tolm, tohm */
+};
+
+struct sbridge_pvt {
+	/* Devices per socket */
+	struct pci_dev		*pci_ddrio;
+	struct pci_dev		*pci_sad0, *pci_sad1;
+	struct pci_dev		*pci_br0, *pci_br1;
+	/* Devices per memory controller */
+	struct pci_dev		*pci_ha, *pci_ta, *pci_ras;
+	struct pci_dev		*pci_tad[NUM_CHANNELS];
+
+	struct sbridge_dev	*sbridge_dev;
+
+	struct sbridge_info	info;
+	struct sbridge_channel	channel[NUM_CHANNELS];
+
+	/* Memory type detection */
+	bool			is_cur_addr_mirrored, is_lockstep, is_close_pg;
+	bool			is_chan_hash;
+	enum mirroring_mode	mirror_mode;
+
+	/* Memory description */
+	u64			tolm, tohm;
+	struct knl_pvt knl;
+};
+
+#define PCI_DESCR(device_id, opt, domain)	\
+	.dev_id = (device_id),		\
+	.optional = opt,	\
+	.dom = domain
+
+static const struct pci_id_descr pci_dev_descr_sbridge[] = {
+		/* Processor Home Agent */
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0,   0, IMC0) },
+
+		/* Memory controller */
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA,    0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_RAS,   0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD0,  0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD1,  0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD2,  0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD3,  0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_DDRIO, 1, SOCK) },
+
+		/* System Address Decoder */
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_SAD0,      0, SOCK) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_SAD1,      0, SOCK) },
+
+		/* Broadcast Registers */
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_BR,        0, SOCK) },
+};
+
+#define PCI_ID_TABLE_ENTRY(A, N, M, T) {	\
+	.descr = A,			\
+	.n_devs_per_imc = N,	\
+	.n_devs_per_sock = ARRAY_SIZE(A),	\
+	.n_imcs_per_sock = M,	\
+	.type = T			\
+}
+
+static const struct pci_id_table pci_dev_descr_sbridge_table[] = {
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_sbridge, ARRAY_SIZE(pci_dev_descr_sbridge), 1, SANDY_BRIDGE),
+	{0,}			/* 0 terminated list. */
+};
+
+/* This changes depending if 1HA or 2HA:
+ * 1HA:
+ *	0x0eb8 (17.0) is DDRIO0
+ * 2HA:
+ *	0x0ebc (17.4) is DDRIO0
+ */
+#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_1HA_DDRIO0	0x0eb8
+#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_2HA_DDRIO0	0x0ebc
+
+/* pci ids */
+#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0		0x0ea0
+#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TA		0x0ea8
+#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_RAS		0x0e71
+#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD0	0x0eaa
+#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD1	0x0eab
+#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD2	0x0eac
+#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD3	0x0ead
+#define PCI_DEVICE_ID_INTEL_IBRIDGE_SAD			0x0ec8
+#define PCI_DEVICE_ID_INTEL_IBRIDGE_BR0			0x0ec9
+#define PCI_DEVICE_ID_INTEL_IBRIDGE_BR1			0x0eca
+#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1		0x0e60
+#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TA		0x0e68
+#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_RAS		0x0e79
+#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD0	0x0e6a
+#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD1	0x0e6b
+#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD2	0x0e6c
+#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD3	0x0e6d
+
+static const struct pci_id_descr pci_dev_descr_ibridge[] = {
+		/* Processor Home Agent */
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0,        0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1,        1, IMC1) },
+
+		/* Memory controller */
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TA,     0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_RAS,    0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD0,   0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD1,   0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD2,   0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD3,   0, IMC0) },
+
+		/* Optional, mode 2HA */
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TA,     1, IMC1) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_RAS,    1, IMC1) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD0,   1, IMC1) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD1,   1, IMC1) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD2,   1, IMC1) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD3,   1, IMC1) },
+
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_1HA_DDRIO0, 1, SOCK) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_2HA_DDRIO0, 1, SOCK) },
+
+		/* System Address Decoder */
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_SAD,            0, SOCK) },
+
+		/* Broadcast Registers */
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_BR0,            1, SOCK) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_BR1,            0, SOCK) },
+
+};
+
+static const struct pci_id_table pci_dev_descr_ibridge_table[] = {
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_ibridge, 12, 2, IVY_BRIDGE),
+	{0,}			/* 0 terminated list. */
+};
+
+/* Haswell support */
+/* EN processor:
+ *	- 1 IMC
+ *	- 3 DDR3 channels, 2 DPC per channel
+ * EP processor:
+ *	- 1 or 2 IMC
+ *	- 4 DDR4 channels, 3 DPC per channel
+ * EP 4S processor:
+ *	- 2 IMC
+ *	- 4 DDR4 channels, 3 DPC per channel
+ * EX processor:
+ *	- 2 IMC
+ *	- each IMC interfaces with a SMI 2 channel
+ *	- each SMI channel interfaces with a scalable memory buffer
+ *	- each scalable memory buffer supports 4 DDR3/DDR4 channels, 3 DPC
+ */
+#define HASWELL_DDRCRCLKCONTROLS 0xa10 /* Ditto on Broadwell */
+#define HASWELL_HASYSDEFEATURE2 0x84
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_VTD_MISC 0x2f28
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0	0x2fa0
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1	0x2f60
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TA	0x2fa8
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TM	0x2f71
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TA	0x2f68
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TM	0x2f79
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_CBO_SAD0 0x2ffc
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_CBO_SAD1 0x2ffd
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD0 0x2faa
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD1 0x2fab
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD2 0x2fac
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD3 0x2fad
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD0 0x2f6a
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD1 0x2f6b
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD2 0x2f6c
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD3 0x2f6d
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO0 0x2fbd
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO1 0x2fbf
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO2 0x2fb9
+#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO3 0x2fbb
+static const struct pci_id_descr pci_dev_descr_haswell[] = {
+	/* first item must be the HA */
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0,      0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1,      1, IMC1) },
+
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TA,   0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TM,   0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD0, 0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD1, 0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD2, 1, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD3, 1, IMC0) },
+
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TA,   1, IMC1) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TM,   1, IMC1) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD0, 1, IMC1) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD1, 1, IMC1) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD2, 1, IMC1) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD3, 1, IMC1) },
+
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_CBO_SAD0, 0, SOCK) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_CBO_SAD1, 0, SOCK) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO0,   1, SOCK) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO1,   1, SOCK) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO2,   1, SOCK) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO3,   1, SOCK) },
+};
+
+static const struct pci_id_table pci_dev_descr_haswell_table[] = {
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_haswell, 13, 2, HASWELL),
+	{0,}			/* 0 terminated list. */
+};
+
+/* Knight's Landing Support */
+/*
+ * KNL's memory channels are swizzled between memory controllers.
+ * MC0 is mapped to CH3,4,5 and MC1 is mapped to CH0,1,2
+ */
+#define knl_channel_remap(mc, chan) ((mc) ? (chan) : (chan) + 3)
+
+/* Memory controller, TAD tables, error injection - 2-8-0, 2-9-0 (2 of these) */
+#define PCI_DEVICE_ID_INTEL_KNL_IMC_MC       0x7840
+/* DRAM channel stuff; bank addrs, dimmmtr, etc.. 2-8-2 - 2-9-4 (6 of these) */
+#define PCI_DEVICE_ID_INTEL_KNL_IMC_CHAN     0x7843
+/* kdrwdbu TAD limits/offsets, MCMTR - 2-10-1, 2-11-1 (2 of these) */
+#define PCI_DEVICE_ID_INTEL_KNL_IMC_TA       0x7844
+/* CHA broadcast registers, dram rules - 1-29-0 (1 of these) */
+#define PCI_DEVICE_ID_INTEL_KNL_IMC_SAD0     0x782a
+/* SAD target - 1-29-1 (1 of these) */
+#define PCI_DEVICE_ID_INTEL_KNL_IMC_SAD1     0x782b
+/* Caching / Home Agent */
+#define PCI_DEVICE_ID_INTEL_KNL_IMC_CHA      0x782c
+/* Device with TOLM and TOHM, 0-5-0 (1 of these) */
+#define PCI_DEVICE_ID_INTEL_KNL_IMC_TOLHM    0x7810
+
+/*
+ * KNL differs from SB, IB, and Haswell in that it has multiple
+ * instances of the same device with the same device ID, so we handle that
+ * by creating as many copies in the table as we expect to find.
+ * (Like device ID must be grouped together.)
+ */
+
+static const struct pci_id_descr pci_dev_descr_knl[] = {
+	[0 ... 1]   = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_MC,    0, IMC0)},
+	[2 ... 7]   = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_CHAN,  0, IMC0) },
+	[8]	    = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_TA,    0, IMC0) },
+	[9]	    = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_TOLHM, 0, IMC0) },
+	[10]	    = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_SAD0,  0, SOCK) },
+	[11]	    = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_SAD1,  0, SOCK) },
+	[12 ... 49] = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_CHA,   0, SOCK) },
+};
+
+static const struct pci_id_table pci_dev_descr_knl_table[] = {
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_knl, ARRAY_SIZE(pci_dev_descr_knl), 1, KNIGHTS_LANDING),
+	{0,}
+};
+
+/*
+ * Broadwell support
+ *
+ * DE processor:
+ *	- 1 IMC
+ *	- 2 DDR3 channels, 2 DPC per channel
+ * EP processor:
+ *	- 1 or 2 IMC
+ *	- 4 DDR4 channels, 3 DPC per channel
+ * EP 4S processor:
+ *	- 2 IMC
+ *	- 4 DDR4 channels, 3 DPC per channel
+ * EX processor:
+ *	- 2 IMC
+ *	- each IMC interfaces with a SMI 2 channel
+ *	- each SMI channel interfaces with a scalable memory buffer
+ *	- each scalable memory buffer supports 4 DDR3/DDR4 channels, 3 DPC
+ */
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_VTD_MISC 0x6f28
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0	0x6fa0
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1	0x6f60
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TA	0x6fa8
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TM	0x6f71
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TA	0x6f68
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TM	0x6f79
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_CBO_SAD0 0x6ffc
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_CBO_SAD1 0x6ffd
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD0 0x6faa
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD1 0x6fab
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD2 0x6fac
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD3 0x6fad
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD0 0x6f6a
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD1 0x6f6b
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD2 0x6f6c
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD3 0x6f6d
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_DDRIO0 0x6faf
+
+static const struct pci_id_descr pci_dev_descr_broadwell[] = {
+	/* first item must be the HA */
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0,      0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1,      1, IMC1) },
+
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TA,   0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TM,   0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD0, 0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD1, 0, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD2, 1, IMC0) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD3, 1, IMC0) },
+
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TA,   1, IMC1) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TM,   1, IMC1) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD0, 1, IMC1) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD1, 1, IMC1) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD2, 1, IMC1) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD3, 1, IMC1) },
+
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_CBO_SAD0, 0, SOCK) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_CBO_SAD1, 0, SOCK) },
+	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_DDRIO0,   1, SOCK) },
+};
+
+static const struct pci_id_table pci_dev_descr_broadwell_table[] = {
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_broadwell, 10, 2, BROADWELL),
+	{0,}			/* 0 terminated list. */
+};
+
+
+/****************************************************************************
+			Ancillary status routines
+ ****************************************************************************/
+
+static inline int numrank(enum type type, u32 mtr)
+{
+	int ranks = (1 << RANK_CNT_BITS(mtr));
+	int max = 4;
+
+	if (type == HASWELL || type == BROADWELL || type == KNIGHTS_LANDING)
+		max = 8;
+
+	if (ranks > max) {
+		edac_dbg(0, "Invalid number of ranks: %d (max = %i) raw value = %x (%04x)\n",
+			 ranks, max, (unsigned int)RANK_CNT_BITS(mtr), mtr);
+		return -EINVAL;
+	}
+
+	return ranks;
+}
+
+static inline int numrow(u32 mtr)
+{
+	int rows = (RANK_WIDTH_BITS(mtr) + 12);
+
+	if (rows < 13 || rows > 18) {
+		edac_dbg(0, "Invalid number of rows: %d (should be between 14 and 17) raw value = %x (%04x)\n",
+			 rows, (unsigned int)RANK_WIDTH_BITS(mtr), mtr);
+		return -EINVAL;
+	}
+
+	return 1 << rows;
+}
+
+static inline int numcol(u32 mtr)
+{
+	int cols = (COL_WIDTH_BITS(mtr) + 10);
+
+	if (cols > 12) {
+		edac_dbg(0, "Invalid number of cols: %d (max = 4) raw value = %x (%04x)\n",
+			 cols, (unsigned int)COL_WIDTH_BITS(mtr), mtr);
+		return -EINVAL;
+	}
+
+	return 1 << cols;
+}
+
+static struct sbridge_dev *get_sbridge_dev(int seg, u8 bus, enum domain dom,
+					   int multi_bus,
+					   struct sbridge_dev *prev)
+{
+	struct sbridge_dev *sbridge_dev;
+
+	/*
+	 * If we have devices scattered across several busses that pertain
+	 * to the same memory controller, we'll lump them all together.
+	 */
+	if (multi_bus) {
+		return list_first_entry_or_null(&sbridge_edac_list,
+				struct sbridge_dev, list);
+	}
+
+	sbridge_dev = list_entry(prev ? prev->list.next
+				      : sbridge_edac_list.next, struct sbridge_dev, list);
+
+	list_for_each_entry_from(sbridge_dev, &sbridge_edac_list, list) {
+		if ((sbridge_dev->seg == seg) && (sbridge_dev->bus == bus) &&
+				(dom == SOCK || dom == sbridge_dev->dom))
+			return sbridge_dev;
+	}
+
+	return NULL;
+}
+
+static struct sbridge_dev *alloc_sbridge_dev(int seg, u8 bus, enum domain dom,
+					     const struct pci_id_table *table)
+{
+	struct sbridge_dev *sbridge_dev;
+
+	sbridge_dev = kzalloc(sizeof(*sbridge_dev), GFP_KERNEL);
+	if (!sbridge_dev)
+		return NULL;
+
+	sbridge_dev->pdev = kcalloc(table->n_devs_per_imc,
+				    sizeof(*sbridge_dev->pdev),
+				    GFP_KERNEL);
+	if (!sbridge_dev->pdev) {
+		kfree(sbridge_dev);
+		return NULL;
+	}
+
+	sbridge_dev->seg = seg;
+	sbridge_dev->bus = bus;
+	sbridge_dev->dom = dom;
+	sbridge_dev->n_devs = table->n_devs_per_imc;
+	list_add_tail(&sbridge_dev->list, &sbridge_edac_list);
+
+	return sbridge_dev;
+}
+
+static void free_sbridge_dev(struct sbridge_dev *sbridge_dev)
+{
+	list_del(&sbridge_dev->list);
+	kfree(sbridge_dev->pdev);
+	kfree(sbridge_dev);
+}
+
+static u64 sbridge_get_tolm(struct sbridge_pvt *pvt)
+{
+	u32 reg;
+
+	/* Address range is 32:28 */
+	pci_read_config_dword(pvt->pci_sad1, TOLM, &reg);
+	return GET_TOLM(reg);
+}
+
+static u64 sbridge_get_tohm(struct sbridge_pvt *pvt)
+{
+	u32 reg;
+
+	pci_read_config_dword(pvt->pci_sad1, TOHM, &reg);
+	return GET_TOHM(reg);
+}
+
+static u64 ibridge_get_tolm(struct sbridge_pvt *pvt)
+{
+	u32 reg;
+
+	pci_read_config_dword(pvt->pci_br1, TOLM, &reg);
+
+	return GET_TOLM(reg);
+}
+
+static u64 ibridge_get_tohm(struct sbridge_pvt *pvt)
+{
+	u32 reg;
+
+	pci_read_config_dword(pvt->pci_br1, TOHM, &reg);
+
+	return GET_TOHM(reg);
+}
+
+static u64 rir_limit(u32 reg)
+{
+	return ((u64)GET_BITFIELD(reg,  1, 10) << 29) | 0x1fffffff;
+}
+
+static u64 sad_limit(u32 reg)
+{
+	return (GET_BITFIELD(reg, 6, 25) << 26) | 0x3ffffff;
+}
+
+static u32 interleave_mode(u32 reg)
+{
+	return GET_BITFIELD(reg, 1, 1);
+}
+
+static u32 dram_attr(u32 reg)
+{
+	return GET_BITFIELD(reg, 2, 3);
+}
+
+static u64 knl_sad_limit(u32 reg)
+{
+	return (GET_BITFIELD(reg, 7, 26) << 26) | 0x3ffffff;
+}
+
+static u32 knl_interleave_mode(u32 reg)
+{
+	return GET_BITFIELD(reg, 1, 2);
+}
+
+static const char * const knl_intlv_mode[] = {
+	"[8:6]", "[10:8]", "[14:12]", "[32:30]"
+};
+
+static const char *get_intlv_mode_str(u32 reg, enum type t)
+{
+	if (t == KNIGHTS_LANDING)
+		return knl_intlv_mode[knl_interleave_mode(reg)];
+	else
+		return interleave_mode(reg) ? "[8:6]" : "[8:6]XOR[18:16]";
+}
+
+static u32 dram_attr_knl(u32 reg)
+{
+	return GET_BITFIELD(reg, 3, 4);
+}
+
+
+static enum mem_type get_memory_type(struct sbridge_pvt *pvt)
+{
+	u32 reg;
+	enum mem_type mtype;
+
+	if (pvt->pci_ddrio) {
+		pci_read_config_dword(pvt->pci_ddrio, pvt->info.rankcfgr,
+				      &reg);
+		if (GET_BITFIELD(reg, 11, 11))
+			/* FIXME: Can also be LRDIMM */
+			mtype = MEM_RDDR3;
+		else
+			mtype = MEM_DDR3;
+	} else
+		mtype = MEM_UNKNOWN;
+
+	return mtype;
+}
+
+static enum mem_type haswell_get_memory_type(struct sbridge_pvt *pvt)
+{
+	u32 reg;
+	bool registered = false;
+	enum mem_type mtype = MEM_UNKNOWN;
+
+	if (!pvt->pci_ddrio)
+		goto out;
+
+	pci_read_config_dword(pvt->pci_ddrio,
+			      HASWELL_DDRCRCLKCONTROLS, &reg);
+	/* Is_Rdimm */
+	if (GET_BITFIELD(reg, 16, 16))
+		registered = true;
+
+	pci_read_config_dword(pvt->pci_ta, MCMTR, &reg);
+	if (GET_BITFIELD(reg, 14, 14)) {
+		if (registered)
+			mtype = MEM_RDDR4;
+		else
+			mtype = MEM_DDR4;
+	} else {
+		if (registered)
+			mtype = MEM_RDDR3;
+		else
+			mtype = MEM_DDR3;
+	}
+
+out:
+	return mtype;
+}
+
+static enum dev_type knl_get_width(struct sbridge_pvt *pvt, u32 mtr)
+{
+	/* for KNL value is fixed */
+	return DEV_X16;
+}
+
+static enum dev_type sbridge_get_width(struct sbridge_pvt *pvt, u32 mtr)
+{
+	/* there's no way to figure out */
+	return DEV_UNKNOWN;
+}
+
+static enum dev_type __ibridge_get_width(u32 mtr)
+{
+	enum dev_type type;
+
+	switch (mtr) {
+	case 3:
+		type = DEV_UNKNOWN;
+		break;
+	case 2:
+		type = DEV_X16;
+		break;
+	case 1:
+		type = DEV_X8;
+		break;
+	case 0:
+		type = DEV_X4;
+		break;
+	}
+
+	return type;
+}
+
+static enum dev_type ibridge_get_width(struct sbridge_pvt *pvt, u32 mtr)
+{
+	/*
+	 * ddr3_width on the documentation but also valid for DDR4 on
+	 * Haswell
+	 */
+	return __ibridge_get_width(GET_BITFIELD(mtr, 7, 8));
+}
+
+static enum dev_type broadwell_get_width(struct sbridge_pvt *pvt, u32 mtr)
+{
+	/* ddr3_width on the documentation but also valid for DDR4 */
+	return __ibridge_get_width(GET_BITFIELD(mtr, 8, 9));
+}
+
+static enum mem_type knl_get_memory_type(struct sbridge_pvt *pvt)
+{
+	/* DDR4 RDIMMS and LRDIMMS are supported */
+	return MEM_RDDR4;
+}
+
+static u8 get_node_id(struct sbridge_pvt *pvt)
+{
+	u32 reg;
+	pci_read_config_dword(pvt->pci_br0, SAD_CONTROL, &reg);
+	return GET_BITFIELD(reg, 0, 2);
+}
+
+static u8 haswell_get_node_id(struct sbridge_pvt *pvt)
+{
+	u32 reg;
+
+	pci_read_config_dword(pvt->pci_sad1, SAD_CONTROL, &reg);
+	return GET_BITFIELD(reg, 0, 3);
+}
+
+static u8 knl_get_node_id(struct sbridge_pvt *pvt)
+{
+	u32 reg;
+
+	pci_read_config_dword(pvt->pci_sad1, SAD_CONTROL, &reg);
+	return GET_BITFIELD(reg, 0, 2);
+}
+
+
+static u64 haswell_get_tolm(struct sbridge_pvt *pvt)
+{
+	u32 reg;
+
+	pci_read_config_dword(pvt->info.pci_vtd, HASWELL_TOLM, &reg);
+	return (GET_BITFIELD(reg, 26, 31) << 26) | 0x3ffffff;
+}
+
+static u64 haswell_get_tohm(struct sbridge_pvt *pvt)
+{
+	u64 rc;
+	u32 reg;
+
+	pci_read_config_dword(pvt->info.pci_vtd, HASWELL_TOHM_0, &reg);
+	rc = GET_BITFIELD(reg, 26, 31);
+	pci_read_config_dword(pvt->info.pci_vtd, HASWELL_TOHM_1, &reg);
+	rc = ((reg << 6) | rc) << 26;
+
+	return rc | 0x3ffffff;
+}
+
+static u64 knl_get_tolm(struct sbridge_pvt *pvt)
+{
+	u32 reg;
+
+	pci_read_config_dword(pvt->knl.pci_mc_info, KNL_TOLM, &reg);
+	return (GET_BITFIELD(reg, 26, 31) << 26) | 0x3ffffff;
+}
+
+static u64 knl_get_tohm(struct sbridge_pvt *pvt)
+{
+	u64 rc;
+	u32 reg_lo, reg_hi;
+
+	pci_read_config_dword(pvt->knl.pci_mc_info, KNL_TOHM_0, &reg_lo);
+	pci_read_config_dword(pvt->knl.pci_mc_info, KNL_TOHM_1, &reg_hi);
+	rc = ((u64)reg_hi << 32) | reg_lo;
+	return rc | 0x3ffffff;
+}
+
+
+static u64 haswell_rir_limit(u32 reg)
+{
+	return (((u64)GET_BITFIELD(reg,  1, 11) + 1) << 29) - 1;
+}
+
+static inline u8 sad_pkg_socket(u8 pkg)
+{
+	/* on Ivy Bridge, nodeID is SASS, where A is HA and S is node id */
+	return ((pkg >> 3) << 2) | (pkg & 0x3);
+}
+
+static inline u8 sad_pkg_ha(u8 pkg)
+{
+	return (pkg >> 2) & 0x1;
+}
+
+static int haswell_chan_hash(int idx, u64 addr)
+{
+	int i;
+
+	/*
+	 * XOR even bits from 12:26 to bit0 of idx,
+	 *     odd bits from 13:27 to bit1
+	 */
+	for (i = 12; i < 28; i += 2)
+		idx ^= (addr >> i) & 3;
+
+	return idx;
+}
+
+/* Low bits of TAD limit, and some metadata. */
+static const u32 knl_tad_dram_limit_lo[] = {
+	0x400, 0x500, 0x600, 0x700,
+	0x800, 0x900, 0xa00, 0xb00,
+};
+
+/* Low bits of TAD offset. */
+static const u32 knl_tad_dram_offset_lo[] = {
+	0x404, 0x504, 0x604, 0x704,
+	0x804, 0x904, 0xa04, 0xb04,
+};
+
+/* High 16 bits of TAD limit and offset. */
+static const u32 knl_tad_dram_hi[] = {
+	0x408, 0x508, 0x608, 0x708,
+	0x808, 0x908, 0xa08, 0xb08,
+};
+
+/* Number of ways a tad entry is interleaved. */
+static const u32 knl_tad_ways[] = {
+	8, 6, 4, 3, 2, 1,
+};
+
+/*
+ * Retrieve the n'th Target Address Decode table entry
+ * from the memory controller's TAD table.
+ *
+ * @pvt:	driver private data
+ * @entry:	which entry you want to retrieve
+ * @mc:		which memory controller (0 or 1)
+ * @offset:	output tad range offset
+ * @limit:	output address of first byte above tad range
+ * @ways:	output number of interleave ways
+ *
+ * The offset value has curious semantics.  It's a sort of running total
+ * of the sizes of all the memory regions that aren't mapped in this
+ * tad table.
+ */
+static int knl_get_tad(const struct sbridge_pvt *pvt,
+		const int entry,
+		const int mc,
+		u64 *offset,
+		u64 *limit,
+		int *ways)
+{
+	u32 reg_limit_lo, reg_offset_lo, reg_hi;
+	struct pci_dev *pci_mc;
+	int way_id;
+
+	switch (mc) {
+	case 0:
+		pci_mc = pvt->knl.pci_mc0;
+		break;
+	case 1:
+		pci_mc = pvt->knl.pci_mc1;
+		break;
+	default:
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	pci_read_config_dword(pci_mc,
+			knl_tad_dram_limit_lo[entry], &reg_limit_lo);
+	pci_read_config_dword(pci_mc,
+			knl_tad_dram_offset_lo[entry], &reg_offset_lo);
+	pci_read_config_dword(pci_mc,
+			knl_tad_dram_hi[entry], &reg_hi);
+
+	/* Is this TAD entry enabled? */
+	if (!GET_BITFIELD(reg_limit_lo, 0, 0))
+		return -ENODEV;
+
+	way_id = GET_BITFIELD(reg_limit_lo, 3, 5);
+
+	if (way_id < ARRAY_SIZE(knl_tad_ways)) {
+		*ways = knl_tad_ways[way_id];
+	} else {
+		*ways = 0;
+		sbridge_printk(KERN_ERR,
+				"Unexpected value %d in mc_tad_limit_lo wayness field\n",
+				way_id);
+		return -ENODEV;
+	}
+
+	/*
+	 * The least significant 6 bits of base and limit are truncated.
+	 * For limit, we fill the missing bits with 1s.
+	 */
+	*offset = ((u64) GET_BITFIELD(reg_offset_lo, 6, 31) << 6) |
+				((u64) GET_BITFIELD(reg_hi, 0,  15) << 32);
+	*limit = ((u64) GET_BITFIELD(reg_limit_lo,  6, 31) << 6) | 63 |
+				((u64) GET_BITFIELD(reg_hi, 16, 31) << 32);
+
+	return 0;
+}
+
+/* Determine which memory controller is responsible for a given channel. */
+static int knl_channel_mc(int channel)
+{
+	WARN_ON(channel < 0 || channel >= 6);
+
+	return channel < 3 ? 1 : 0;
+}
+
+/*
+ * Get the Nth entry from EDC_ROUTE_TABLE register.
+ * (This is the per-tile mapping of logical interleave targets to
+ *  physical EDC modules.)
+ *
+ * entry 0: 0:2
+ *       1: 3:5
+ *       2: 6:8
+ *       3: 9:11
+ *       4: 12:14
+ *       5: 15:17
+ *       6: 18:20
+ *       7: 21:23
+ * reserved: 24:31
+ */
+static u32 knl_get_edc_route(int entry, u32 reg)
+{
+	WARN_ON(entry >= KNL_MAX_EDCS);
+	return GET_BITFIELD(reg, entry*3, (entry*3)+2);
+}
+
+/*
+ * Get the Nth entry from MC_ROUTE_TABLE register.
+ * (This is the per-tile mapping of logical interleave targets to
+ *  physical DRAM channels modules.)
+ *
+ * entry 0: mc 0:2   channel 18:19
+ *       1: mc 3:5   channel 20:21
+ *       2: mc 6:8   channel 22:23
+ *       3: mc 9:11  channel 24:25
+ *       4: mc 12:14 channel 26:27
+ *       5: mc 15:17 channel 28:29
+ * reserved: 30:31
+ *
+ * Though we have 3 bits to identify the MC, we should only see
+ * the values 0 or 1.
+ */
+
+static u32 knl_get_mc_route(int entry, u32 reg)
+{
+	int mc, chan;
+
+	WARN_ON(entry >= KNL_MAX_CHANNELS);
+
+	mc = GET_BITFIELD(reg, entry*3, (entry*3)+2);
+	chan = GET_BITFIELD(reg, (entry*2) + 18, (entry*2) + 18 + 1);
+
+	return knl_channel_remap(mc, chan);
+}
+
+/*
+ * Render the EDC_ROUTE register in human-readable form.
+ * Output string s should be at least KNL_MAX_EDCS*2 bytes.
+ */
+static void knl_show_edc_route(u32 reg, char *s)
+{
+	int i;
+
+	for (i = 0; i < KNL_MAX_EDCS; i++) {
+		s[i*2] = knl_get_edc_route(i, reg) + '0';
+		s[i*2+1] = '-';
+	}
+
+	s[KNL_MAX_EDCS*2 - 1] = '\0';
+}
+
+/*
+ * Render the MC_ROUTE register in human-readable form.
+ * Output string s should be at least KNL_MAX_CHANNELS*2 bytes.
+ */
+static void knl_show_mc_route(u32 reg, char *s)
+{
+	int i;
+
+	for (i = 0; i < KNL_MAX_CHANNELS; i++) {
+		s[i*2] = knl_get_mc_route(i, reg) + '0';
+		s[i*2+1] = '-';
+	}
+
+	s[KNL_MAX_CHANNELS*2 - 1] = '\0';
+}
+
+#define KNL_EDC_ROUTE 0xb8
+#define KNL_MC_ROUTE 0xb4
+
+/* Is this dram rule backed by regular DRAM in flat mode? */
+#define KNL_EDRAM(reg) GET_BITFIELD(reg, 29, 29)
+
+/* Is this dram rule cached? */
+#define KNL_CACHEABLE(reg) GET_BITFIELD(reg, 28, 28)
+
+/* Is this rule backed by edc ? */
+#define KNL_EDRAM_ONLY(reg) GET_BITFIELD(reg, 29, 29)
+
+/* Is this rule backed by DRAM, cacheable in EDRAM? */
+#define KNL_CACHEABLE(reg) GET_BITFIELD(reg, 28, 28)
+
+/* Is this rule mod3? */
+#define KNL_MOD3(reg) GET_BITFIELD(reg, 27, 27)
+
+/*
+ * Figure out how big our RAM modules are.
+ *
+ * The DIMMMTR register in KNL doesn't tell us the size of the DIMMs, so we
+ * have to figure this out from the SAD rules, interleave lists, route tables,
+ * and TAD rules.
+ *
+ * SAD rules can have holes in them (e.g. the 3G-4G hole), so we have to
+ * inspect the TAD rules to figure out how large the SAD regions really are.
+ *
+ * When we know the real size of a SAD region and how many ways it's
+ * interleaved, we know the individual contribution of each channel to
+ * TAD is size/ways.
+ *
+ * Finally, we have to check whether each channel participates in each SAD
+ * region.
+ *
+ * Fortunately, KNL only supports one DIMM per channel, so once we know how
+ * much memory the channel uses, we know the DIMM is at least that large.
+ * (The BIOS might possibly choose not to map all available memory, in which
+ * case we will underreport the size of the DIMM.)
+ *
+ * In theory, we could try to determine the EDC sizes as well, but that would
+ * only work in flat mode, not in cache mode.
+ *
+ * @mc_sizes: Output sizes of channels (must have space for KNL_MAX_CHANNELS
+ *            elements)
+ */
+static int knl_get_dimm_capacity(struct sbridge_pvt *pvt, u64 *mc_sizes)
+{
+	u64 sad_base, sad_size, sad_limit = 0;
+	u64 tad_base, tad_size, tad_limit, tad_deadspace, tad_livespace;
+	int sad_rule = 0;
+	int tad_rule = 0;
+	int intrlv_ways, tad_ways;
+	u32 first_pkg, pkg;
+	int i;
+	u64 sad_actual_size[2]; /* sad size accounting for holes, per mc */
+	u32 dram_rule, interleave_reg;
+	u32 mc_route_reg[KNL_MAX_CHAS];
+	u32 edc_route_reg[KNL_MAX_CHAS];
+	int edram_only;
+	char edc_route_string[KNL_MAX_EDCS*2];
+	char mc_route_string[KNL_MAX_CHANNELS*2];
+	int cur_reg_start;
+	int mc;
+	int channel;
+	int participants[KNL_MAX_CHANNELS];
+
+	for (i = 0; i < KNL_MAX_CHANNELS; i++)
+		mc_sizes[i] = 0;
+
+	/* Read the EDC route table in each CHA. */
+	cur_reg_start = 0;
+	for (i = 0; i < KNL_MAX_CHAS; i++) {
+		pci_read_config_dword(pvt->knl.pci_cha[i],
+				KNL_EDC_ROUTE, &edc_route_reg[i]);
+
+		if (i > 0 && edc_route_reg[i] != edc_route_reg[i-1]) {
+			knl_show_edc_route(edc_route_reg[i-1],
+					edc_route_string);
+			if (cur_reg_start == i-1)
+				edac_dbg(0, "edc route table for CHA %d: %s\n",
+					cur_reg_start, edc_route_string);
+			else
+				edac_dbg(0, "edc route table for CHA %d-%d: %s\n",
+					cur_reg_start, i-1, edc_route_string);
+			cur_reg_start = i;
+		}
+	}
+	knl_show_edc_route(edc_route_reg[i-1], edc_route_string);
+	if (cur_reg_start == i-1)
+		edac_dbg(0, "edc route table for CHA %d: %s\n",
+			cur_reg_start, edc_route_string);
+	else
+		edac_dbg(0, "edc route table for CHA %d-%d: %s\n",
+			cur_reg_start, i-1, edc_route_string);
+
+	/* Read the MC route table in each CHA. */
+	cur_reg_start = 0;
+	for (i = 0; i < KNL_MAX_CHAS; i++) {
+		pci_read_config_dword(pvt->knl.pci_cha[i],
+			KNL_MC_ROUTE, &mc_route_reg[i]);
+
+		if (i > 0 && mc_route_reg[i] != mc_route_reg[i-1]) {
+			knl_show_mc_route(mc_route_reg[i-1], mc_route_string);
+			if (cur_reg_start == i-1)
+				edac_dbg(0, "mc route table for CHA %d: %s\n",
+					cur_reg_start, mc_route_string);
+			else
+				edac_dbg(0, "mc route table for CHA %d-%d: %s\n",
+					cur_reg_start, i-1, mc_route_string);
+			cur_reg_start = i;
+		}
+	}
+	knl_show_mc_route(mc_route_reg[i-1], mc_route_string);
+	if (cur_reg_start == i-1)
+		edac_dbg(0, "mc route table for CHA %d: %s\n",
+			cur_reg_start, mc_route_string);
+	else
+		edac_dbg(0, "mc route table for CHA %d-%d: %s\n",
+			cur_reg_start, i-1, mc_route_string);
+
+	/* Process DRAM rules */
+	for (sad_rule = 0; sad_rule < pvt->info.max_sad; sad_rule++) {
+		/* previous limit becomes the new base */
+		sad_base = sad_limit;
+
+		pci_read_config_dword(pvt->pci_sad0,
+			pvt->info.dram_rule[sad_rule], &dram_rule);
+
+		if (!DRAM_RULE_ENABLE(dram_rule))
+			break;
+
+		edram_only = KNL_EDRAM_ONLY(dram_rule);
+
+		sad_limit = pvt->info.sad_limit(dram_rule)+1;
+		sad_size = sad_limit - sad_base;
+
+		pci_read_config_dword(pvt->pci_sad0,
+			pvt->info.interleave_list[sad_rule], &interleave_reg);
+
+		/*
+		 * Find out how many ways this dram rule is interleaved.
+		 * We stop when we see the first channel again.
+		 */
+		first_pkg = sad_pkg(pvt->info.interleave_pkg,
+						interleave_reg, 0);
+		for (intrlv_ways = 1; intrlv_ways < 8; intrlv_ways++) {
+			pkg = sad_pkg(pvt->info.interleave_pkg,
+						interleave_reg, intrlv_ways);
+
+			if ((pkg & 0x8) == 0) {
+				/*
+				 * 0 bit means memory is non-local,
+				 * which KNL doesn't support
+				 */
+				edac_dbg(0, "Unexpected interleave target %d\n",
+					pkg);
+				return -1;
+			}
+
+			if (pkg == first_pkg)
+				break;
+		}
+		if (KNL_MOD3(dram_rule))
+			intrlv_ways *= 3;
+
+		edac_dbg(3, "dram rule %d (base 0x%llx, limit 0x%llx), %d way interleave%s\n",
+			sad_rule,
+			sad_base,
+			sad_limit,
+			intrlv_ways,
+			edram_only ? ", EDRAM" : "");
+
+		/*
+		 * Find out how big the SAD region really is by iterating
+		 * over TAD tables (SAD regions may contain holes).
+		 * Each memory controller might have a different TAD table, so
+		 * we have to look at both.
+		 *
+		 * Livespace is the memory that's mapped in this TAD table,
+		 * deadspace is the holes (this could be the MMIO hole, or it
+		 * could be memory that's mapped by the other TAD table but
+		 * not this one).
+		 */
+		for (mc = 0; mc < 2; mc++) {
+			sad_actual_size[mc] = 0;
+			tad_livespace = 0;
+			for (tad_rule = 0;
+					tad_rule < ARRAY_SIZE(
+						knl_tad_dram_limit_lo);
+					tad_rule++) {
+				if (knl_get_tad(pvt,
+						tad_rule,
+						mc,
+						&tad_deadspace,
+						&tad_limit,
+						&tad_ways))
+					break;
+
+				tad_size = (tad_limit+1) -
+					(tad_livespace + tad_deadspace);
+				tad_livespace += tad_size;
+				tad_base = (tad_limit+1) - tad_size;
+
+				if (tad_base < sad_base) {
+					if (tad_limit > sad_base)
+						edac_dbg(0, "TAD region overlaps lower SAD boundary -- TAD tables may be configured incorrectly.\n");
+				} else if (tad_base < sad_limit) {
+					if (tad_limit+1 > sad_limit) {
+						edac_dbg(0, "TAD region overlaps upper SAD boundary -- TAD tables may be configured incorrectly.\n");
+					} else {
+						/* TAD region is completely inside SAD region */
+						edac_dbg(3, "TAD region %d 0x%llx - 0x%llx (%lld bytes) table%d\n",
+							tad_rule, tad_base,
+							tad_limit, tad_size,
+							mc);
+						sad_actual_size[mc] += tad_size;
+					}
+				}
+				tad_base = tad_limit+1;
+			}
+		}
+
+		for (mc = 0; mc < 2; mc++) {
+			edac_dbg(3, " total TAD DRAM footprint in table%d : 0x%llx (%lld bytes)\n",
+				mc, sad_actual_size[mc], sad_actual_size[mc]);
+		}
+
+		/* Ignore EDRAM rule */
+		if (edram_only)
+			continue;
+
+		/* Figure out which channels participate in interleave. */
+		for (channel = 0; channel < KNL_MAX_CHANNELS; channel++)
+			participants[channel] = 0;
+
+		/* For each channel, does at least one CHA have
+		 * this channel mapped to the given target?
+		 */
+		for (channel = 0; channel < KNL_MAX_CHANNELS; channel++) {
+			int target;
+			int cha;
+
+			for (target = 0; target < KNL_MAX_CHANNELS; target++) {
+				for (cha = 0; cha < KNL_MAX_CHAS; cha++) {
+					if (knl_get_mc_route(target,
+						mc_route_reg[cha]) == channel
+						&& !participants[channel]) {
+						participants[channel] = 1;
+						break;
+					}
+				}
+			}
+		}
+
+		for (channel = 0; channel < KNL_MAX_CHANNELS; channel++) {
+			mc = knl_channel_mc(channel);
+			if (participants[channel]) {
+				edac_dbg(4, "mc channel %d contributes %lld bytes via sad entry %d\n",
+					channel,
+					sad_actual_size[mc]/intrlv_ways,
+					sad_rule);
+				mc_sizes[channel] +=
+					sad_actual_size[mc]/intrlv_ways;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static void get_source_id(struct mem_ctl_info *mci)
+{
+	struct sbridge_pvt *pvt = mci->pvt_info;
+	u32 reg;
+
+	if (pvt->info.type == HASWELL || pvt->info.type == BROADWELL ||
+	    pvt->info.type == KNIGHTS_LANDING)
+		pci_read_config_dword(pvt->pci_sad1, SAD_TARGET, &reg);
+	else
+		pci_read_config_dword(pvt->pci_br0, SAD_TARGET, &reg);
+
+	if (pvt->info.type == KNIGHTS_LANDING)
+		pvt->sbridge_dev->source_id = SOURCE_ID_KNL(reg);
+	else
+		pvt->sbridge_dev->source_id = SOURCE_ID(reg);
+}
+
+static int __populate_dimms(struct mem_ctl_info *mci,
+			    u64 knl_mc_sizes[KNL_MAX_CHANNELS],
+			    enum edac_type mode)
+{
+	struct sbridge_pvt *pvt = mci->pvt_info;
+	int channels = pvt->info.type == KNIGHTS_LANDING ? KNL_MAX_CHANNELS
+							 : NUM_CHANNELS;
+	unsigned int i, j, banks, ranks, rows, cols, npages;
+	struct dimm_info *dimm;
+	enum mem_type mtype;
+	u64 size;
+
+	mtype = pvt->info.get_memory_type(pvt);
+	if (mtype == MEM_RDDR3 || mtype == MEM_RDDR4)
+		edac_dbg(0, "Memory is registered\n");
+	else if (mtype == MEM_UNKNOWN)
+		edac_dbg(0, "Cannot determine memory type\n");
+	else
+		edac_dbg(0, "Memory is unregistered\n");
+
+	if (mtype == MEM_DDR4 || mtype == MEM_RDDR4)
+		banks = 16;
+	else
+		banks = 8;
+
+	for (i = 0; i < channels; i++) {
+		u32 mtr;
+
+		int max_dimms_per_channel;
+
+		if (pvt->info.type == KNIGHTS_LANDING) {
+			max_dimms_per_channel = 1;
+			if (!pvt->knl.pci_channel[i])
+				continue;
+		} else {
+			max_dimms_per_channel = ARRAY_SIZE(mtr_regs);
+			if (!pvt->pci_tad[i])
+				continue;
+		}
+
+		for (j = 0; j < max_dimms_per_channel; j++) {
+			dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, i, j, 0);
+			if (pvt->info.type == KNIGHTS_LANDING) {
+				pci_read_config_dword(pvt->knl.pci_channel[i],
+					knl_mtr_reg, &mtr);
+			} else {
+				pci_read_config_dword(pvt->pci_tad[i],
+					mtr_regs[j], &mtr);
+			}
+			edac_dbg(4, "Channel #%d  MTR%d = %x\n", i, j, mtr);
+			if (IS_DIMM_PRESENT(mtr)) {
+				if (!IS_ECC_ENABLED(pvt->info.mcmtr)) {
+					sbridge_printk(KERN_ERR, "CPU SrcID #%d, Ha #%d, Channel #%d has DIMMs, but ECC is disabled\n",
+						       pvt->sbridge_dev->source_id,
+						       pvt->sbridge_dev->dom, i);
+					return -ENODEV;
+				}
+				pvt->channel[i].dimms++;
+
+				ranks = numrank(pvt->info.type, mtr);
+
+				if (pvt->info.type == KNIGHTS_LANDING) {
+					/* For DDR4, this is fixed. */
+					cols = 1 << 10;
+					rows = knl_mc_sizes[i] /
+						((u64) cols * ranks * banks * 8);
+				} else {
+					rows = numrow(mtr);
+					cols = numcol(mtr);
+				}
+
+				size = ((u64)rows * cols * banks * ranks) >> (20 - 3);
+				npages = MiB_TO_PAGES(size);
+
+				edac_dbg(0, "mc#%d: ha %d channel %d, dimm %d, %lld MiB (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n",
+					 pvt->sbridge_dev->mc, pvt->sbridge_dev->dom, i, j,
+					 size, npages,
+					 banks, ranks, rows, cols);
+
+				dimm->nr_pages = npages;
+				dimm->grain = 32;
+				dimm->dtype = pvt->info.get_width(pvt, mtr);
+				dimm->mtype = mtype;
+				dimm->edac_mode = mode;
+				snprintf(dimm->label, sizeof(dimm->label),
+						 "CPU_SrcID#%u_Ha#%u_Chan#%u_DIMM#%u",
+						 pvt->sbridge_dev->source_id, pvt->sbridge_dev->dom, i, j);
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int get_dimm_config(struct mem_ctl_info *mci)
+{
+	struct sbridge_pvt *pvt = mci->pvt_info;
+	u64 knl_mc_sizes[KNL_MAX_CHANNELS];
+	enum edac_type mode;
+	u32 reg;
+
+	pvt->sbridge_dev->node_id = pvt->info.get_node_id(pvt);
+	edac_dbg(0, "mc#%d: Node ID: %d, source ID: %d\n",
+		 pvt->sbridge_dev->mc,
+		 pvt->sbridge_dev->node_id,
+		 pvt->sbridge_dev->source_id);
+
+	/* KNL doesn't support mirroring or lockstep,
+	 * and is always closed page
+	 */
+	if (pvt->info.type == KNIGHTS_LANDING) {
+		mode = EDAC_S4ECD4ED;
+		pvt->mirror_mode = NON_MIRRORING;
+		pvt->is_cur_addr_mirrored = false;
+
+		if (knl_get_dimm_capacity(pvt, knl_mc_sizes) != 0)
+			return -1;
+		if (pci_read_config_dword(pvt->pci_ta, KNL_MCMTR, &pvt->info.mcmtr)) {
+			edac_dbg(0, "Failed to read KNL_MCMTR register\n");
+			return -ENODEV;
+		}
+	} else {
+		if (pvt->info.type == HASWELL || pvt->info.type == BROADWELL) {
+			if (pci_read_config_dword(pvt->pci_ha, HASWELL_HASYSDEFEATURE2, &reg)) {
+				edac_dbg(0, "Failed to read HASWELL_HASYSDEFEATURE2 register\n");
+				return -ENODEV;
+			}
+			pvt->is_chan_hash = GET_BITFIELD(reg, 21, 21);
+			if (GET_BITFIELD(reg, 28, 28)) {
+				pvt->mirror_mode = ADDR_RANGE_MIRRORING;
+				edac_dbg(0, "Address range partial memory mirroring is enabled\n");
+				goto next;
+			}
+		}
+		if (pci_read_config_dword(pvt->pci_ras, RASENABLES, &reg)) {
+			edac_dbg(0, "Failed to read RASENABLES register\n");
+			return -ENODEV;
+		}
+		if (IS_MIRROR_ENABLED(reg)) {
+			pvt->mirror_mode = FULL_MIRRORING;
+			edac_dbg(0, "Full memory mirroring is enabled\n");
+		} else {
+			pvt->mirror_mode = NON_MIRRORING;
+			edac_dbg(0, "Memory mirroring is disabled\n");
+		}
+
+next:
+		if (pci_read_config_dword(pvt->pci_ta, MCMTR, &pvt->info.mcmtr)) {
+			edac_dbg(0, "Failed to read MCMTR register\n");
+			return -ENODEV;
+		}
+		if (IS_LOCKSTEP_ENABLED(pvt->info.mcmtr)) {
+			edac_dbg(0, "Lockstep is enabled\n");
+			mode = EDAC_S8ECD8ED;
+			pvt->is_lockstep = true;
+		} else {
+			edac_dbg(0, "Lockstep is disabled\n");
+			mode = EDAC_S4ECD4ED;
+			pvt->is_lockstep = false;
+		}
+		if (IS_CLOSE_PG(pvt->info.mcmtr)) {
+			edac_dbg(0, "address map is on closed page mode\n");
+			pvt->is_close_pg = true;
+		} else {
+			edac_dbg(0, "address map is on open page mode\n");
+			pvt->is_close_pg = false;
+		}
+	}
+
+	return __populate_dimms(mci, knl_mc_sizes, mode);
+}
+
+static void get_memory_layout(const struct mem_ctl_info *mci)
+{
+	struct sbridge_pvt *pvt = mci->pvt_info;
+	int i, j, k, n_sads, n_tads, sad_interl;
+	u32 reg;
+	u64 limit, prv = 0;
+	u64 tmp_mb;
+	u32 gb, mb;
+	u32 rir_way;
+
+	/*
+	 * Step 1) Get TOLM/TOHM ranges
+	 */
+
+	pvt->tolm = pvt->info.get_tolm(pvt);
+	tmp_mb = (1 + pvt->tolm) >> 20;
+
+	gb = div_u64_rem(tmp_mb, 1024, &mb);
+	edac_dbg(0, "TOLM: %u.%03u GB (0x%016Lx)\n",
+		gb, (mb*1000)/1024, (u64)pvt->tolm);
+
+	/* Address range is already 45:25 */
+	pvt->tohm = pvt->info.get_tohm(pvt);
+	tmp_mb = (1 + pvt->tohm) >> 20;
+
+	gb = div_u64_rem(tmp_mb, 1024, &mb);
+	edac_dbg(0, "TOHM: %u.%03u GB (0x%016Lx)\n",
+		gb, (mb*1000)/1024, (u64)pvt->tohm);
+
+	/*
+	 * Step 2) Get SAD range and SAD Interleave list
+	 * TAD registers contain the interleave wayness. However, it
+	 * seems simpler to just discover it indirectly, with the
+	 * algorithm bellow.
+	 */
+	prv = 0;
+	for (n_sads = 0; n_sads < pvt->info.max_sad; n_sads++) {
+		/* SAD_LIMIT Address range is 45:26 */
+		pci_read_config_dword(pvt->pci_sad0, pvt->info.dram_rule[n_sads],
+				      &reg);
+		limit = pvt->info.sad_limit(reg);
+
+		if (!DRAM_RULE_ENABLE(reg))
+			continue;
+
+		if (limit <= prv)
+			break;
+
+		tmp_mb = (limit + 1) >> 20;
+		gb = div_u64_rem(tmp_mb, 1024, &mb);
+		edac_dbg(0, "SAD#%d %s up to %u.%03u GB (0x%016Lx) Interleave: %s reg=0x%08x\n",
+			 n_sads,
+			 show_dram_attr(pvt->info.dram_attr(reg)),
+			 gb, (mb*1000)/1024,
+			 ((u64)tmp_mb) << 20L,
+			 get_intlv_mode_str(reg, pvt->info.type),
+			 reg);
+		prv = limit;
+
+		pci_read_config_dword(pvt->pci_sad0, pvt->info.interleave_list[n_sads],
+				      &reg);
+		sad_interl = sad_pkg(pvt->info.interleave_pkg, reg, 0);
+		for (j = 0; j < 8; j++) {
+			u32 pkg = sad_pkg(pvt->info.interleave_pkg, reg, j);
+			if (j > 0 && sad_interl == pkg)
+				break;
+
+			edac_dbg(0, "SAD#%d, interleave #%d: %d\n",
+				 n_sads, j, pkg);
+		}
+	}
+
+	if (pvt->info.type == KNIGHTS_LANDING)
+		return;
+
+	/*
+	 * Step 3) Get TAD range
+	 */
+	prv = 0;
+	for (n_tads = 0; n_tads < MAX_TAD; n_tads++) {
+		pci_read_config_dword(pvt->pci_ha, tad_dram_rule[n_tads], &reg);
+		limit = TAD_LIMIT(reg);
+		if (limit <= prv)
+			break;
+		tmp_mb = (limit + 1) >> 20;
+
+		gb = div_u64_rem(tmp_mb, 1024, &mb);
+		edac_dbg(0, "TAD#%d: up to %u.%03u GB (0x%016Lx), socket interleave %d, memory interleave %d, TGT: %d, %d, %d, %d, reg=0x%08x\n",
+			 n_tads, gb, (mb*1000)/1024,
+			 ((u64)tmp_mb) << 20L,
+			 (u32)(1 << TAD_SOCK(reg)),
+			 (u32)TAD_CH(reg) + 1,
+			 (u32)TAD_TGT0(reg),
+			 (u32)TAD_TGT1(reg),
+			 (u32)TAD_TGT2(reg),
+			 (u32)TAD_TGT3(reg),
+			 reg);
+		prv = limit;
+	}
+
+	/*
+	 * Step 4) Get TAD offsets, per each channel
+	 */
+	for (i = 0; i < NUM_CHANNELS; i++) {
+		if (!pvt->channel[i].dimms)
+			continue;
+		for (j = 0; j < n_tads; j++) {
+			pci_read_config_dword(pvt->pci_tad[i],
+					      tad_ch_nilv_offset[j],
+					      &reg);
+			tmp_mb = TAD_OFFSET(reg) >> 20;
+			gb = div_u64_rem(tmp_mb, 1024, &mb);
+			edac_dbg(0, "TAD CH#%d, offset #%d: %u.%03u GB (0x%016Lx), reg=0x%08x\n",
+				 i, j,
+				 gb, (mb*1000)/1024,
+				 ((u64)tmp_mb) << 20L,
+				 reg);
+		}
+	}
+
+	/*
+	 * Step 6) Get RIR Wayness/Limit, per each channel
+	 */
+	for (i = 0; i < NUM_CHANNELS; i++) {
+		if (!pvt->channel[i].dimms)
+			continue;
+		for (j = 0; j < MAX_RIR_RANGES; j++) {
+			pci_read_config_dword(pvt->pci_tad[i],
+					      rir_way_limit[j],
+					      &reg);
+
+			if (!IS_RIR_VALID(reg))
+				continue;
+
+			tmp_mb = pvt->info.rir_limit(reg) >> 20;
+			rir_way = 1 << RIR_WAY(reg);
+			gb = div_u64_rem(tmp_mb, 1024, &mb);
+			edac_dbg(0, "CH#%d RIR#%d, limit: %u.%03u GB (0x%016Lx), way: %d, reg=0x%08x\n",
+				 i, j,
+				 gb, (mb*1000)/1024,
+				 ((u64)tmp_mb) << 20L,
+				 rir_way,
+				 reg);
+
+			for (k = 0; k < rir_way; k++) {
+				pci_read_config_dword(pvt->pci_tad[i],
+						      rir_offset[j][k],
+						      &reg);
+				tmp_mb = RIR_OFFSET(pvt->info.type, reg) << 6;
+
+				gb = div_u64_rem(tmp_mb, 1024, &mb);
+				edac_dbg(0, "CH#%d RIR#%d INTL#%d, offset %u.%03u GB (0x%016Lx), tgt: %d, reg=0x%08x\n",
+					 i, j, k,
+					 gb, (mb*1000)/1024,
+					 ((u64)tmp_mb) << 20L,
+					 (u32)RIR_RNK_TGT(pvt->info.type, reg),
+					 reg);
+			}
+		}
+	}
+}
+
+static struct mem_ctl_info *get_mci_for_node_id(u8 node_id, u8 ha)
+{
+	struct sbridge_dev *sbridge_dev;
+
+	list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) {
+		if (sbridge_dev->node_id == node_id && sbridge_dev->dom == ha)
+			return sbridge_dev->mci;
+	}
+	return NULL;
+}
+
+static int get_memory_error_data(struct mem_ctl_info *mci,
+				 u64 addr,
+				 u8 *socket, u8 *ha,
+				 long *channel_mask,
+				 u8 *rank,
+				 char **area_type, char *msg)
+{
+	struct mem_ctl_info	*new_mci;
+	struct sbridge_pvt *pvt = mci->pvt_info;
+	struct pci_dev		*pci_ha;
+	int			n_rir, n_sads, n_tads, sad_way, sck_xch;
+	int			sad_interl, idx, base_ch;
+	int			interleave_mode, shiftup = 0;
+	unsigned int		sad_interleave[MAX_INTERLEAVE];
+	u32			reg, dram_rule;
+	u8			ch_way, sck_way, pkg, sad_ha = 0;
+	u32			tad_offset;
+	u32			rir_way;
+	u32			mb, gb;
+	u64			ch_addr, offset, limit = 0, prv = 0;
+
+
+	/*
+	 * Step 0) Check if the address is at special memory ranges
+	 * The check bellow is probably enough to fill all cases where
+	 * the error is not inside a memory, except for the legacy
+	 * range (e. g. VGA addresses). It is unlikely, however, that the
+	 * memory controller would generate an error on that range.
+	 */
+	if ((addr > (u64) pvt->tolm) && (addr < (1LL << 32))) {
+		sprintf(msg, "Error at TOLM area, on addr 0x%08Lx", addr);
+		return -EINVAL;
+	}
+	if (addr >= (u64)pvt->tohm) {
+		sprintf(msg, "Error at MMIOH area, on addr 0x%016Lx", addr);
+		return -EINVAL;
+	}
+
+	/*
+	 * Step 1) Get socket
+	 */
+	for (n_sads = 0; n_sads < pvt->info.max_sad; n_sads++) {
+		pci_read_config_dword(pvt->pci_sad0, pvt->info.dram_rule[n_sads],
+				      &reg);
+
+		if (!DRAM_RULE_ENABLE(reg))
+			continue;
+
+		limit = pvt->info.sad_limit(reg);
+		if (limit <= prv) {
+			sprintf(msg, "Can't discover the memory socket");
+			return -EINVAL;
+		}
+		if  (addr <= limit)
+			break;
+		prv = limit;
+	}
+	if (n_sads == pvt->info.max_sad) {
+		sprintf(msg, "Can't discover the memory socket");
+		return -EINVAL;
+	}
+	dram_rule = reg;
+	*area_type = show_dram_attr(pvt->info.dram_attr(dram_rule));
+	interleave_mode = pvt->info.interleave_mode(dram_rule);
+
+	pci_read_config_dword(pvt->pci_sad0, pvt->info.interleave_list[n_sads],
+			      &reg);
+
+	if (pvt->info.type == SANDY_BRIDGE) {
+		sad_interl = sad_pkg(pvt->info.interleave_pkg, reg, 0);
+		for (sad_way = 0; sad_way < 8; sad_way++) {
+			u32 pkg = sad_pkg(pvt->info.interleave_pkg, reg, sad_way);
+			if (sad_way > 0 && sad_interl == pkg)
+				break;
+			sad_interleave[sad_way] = pkg;
+			edac_dbg(0, "SAD interleave #%d: %d\n",
+				 sad_way, sad_interleave[sad_way]);
+		}
+		edac_dbg(0, "mc#%d: Error detected on SAD#%d: address 0x%016Lx < 0x%016Lx, Interleave [%d:6]%s\n",
+			 pvt->sbridge_dev->mc,
+			 n_sads,
+			 addr,
+			 limit,
+			 sad_way + 7,
+			 !interleave_mode ? "" : "XOR[18:16]");
+		if (interleave_mode)
+			idx = ((addr >> 6) ^ (addr >> 16)) & 7;
+		else
+			idx = (addr >> 6) & 7;
+		switch (sad_way) {
+		case 1:
+			idx = 0;
+			break;
+		case 2:
+			idx = idx & 1;
+			break;
+		case 4:
+			idx = idx & 3;
+			break;
+		case 8:
+			break;
+		default:
+			sprintf(msg, "Can't discover socket interleave");
+			return -EINVAL;
+		}
+		*socket = sad_interleave[idx];
+		edac_dbg(0, "SAD interleave index: %d (wayness %d) = CPU socket %d\n",
+			 idx, sad_way, *socket);
+	} else if (pvt->info.type == HASWELL || pvt->info.type == BROADWELL) {
+		int bits, a7mode = A7MODE(dram_rule);
+
+		if (a7mode) {
+			/* A7 mode swaps P9 with P6 */
+			bits = GET_BITFIELD(addr, 7, 8) << 1;
+			bits |= GET_BITFIELD(addr, 9, 9);
+		} else
+			bits = GET_BITFIELD(addr, 6, 8);
+
+		if (interleave_mode == 0) {
+			/* interleave mode will XOR {8,7,6} with {18,17,16} */
+			idx = GET_BITFIELD(addr, 16, 18);
+			idx ^= bits;
+		} else
+			idx = bits;
+
+		pkg = sad_pkg(pvt->info.interleave_pkg, reg, idx);
+		*socket = sad_pkg_socket(pkg);
+		sad_ha = sad_pkg_ha(pkg);
+
+		if (a7mode) {
+			/* MCChanShiftUpEnable */
+			pci_read_config_dword(pvt->pci_ha, HASWELL_HASYSDEFEATURE2, &reg);
+			shiftup = GET_BITFIELD(reg, 22, 22);
+		}
+
+		edac_dbg(0, "SAD interleave package: %d = CPU socket %d, HA %i, shiftup: %i\n",
+			 idx, *socket, sad_ha, shiftup);
+	} else {
+		/* Ivy Bridge's SAD mode doesn't support XOR interleave mode */
+		idx = (addr >> 6) & 7;
+		pkg = sad_pkg(pvt->info.interleave_pkg, reg, idx);
+		*socket = sad_pkg_socket(pkg);
+		sad_ha = sad_pkg_ha(pkg);
+		edac_dbg(0, "SAD interleave package: %d = CPU socket %d, HA %d\n",
+			 idx, *socket, sad_ha);
+	}
+
+	*ha = sad_ha;
+
+	/*
+	 * Move to the proper node structure, in order to access the
+	 * right PCI registers
+	 */
+	new_mci = get_mci_for_node_id(*socket, sad_ha);
+	if (!new_mci) {
+		sprintf(msg, "Struct for socket #%u wasn't initialized",
+			*socket);
+		return -EINVAL;
+	}
+	mci = new_mci;
+	pvt = mci->pvt_info;
+
+	/*
+	 * Step 2) Get memory channel
+	 */
+	prv = 0;
+	pci_ha = pvt->pci_ha;
+	for (n_tads = 0; n_tads < MAX_TAD; n_tads++) {
+		pci_read_config_dword(pci_ha, tad_dram_rule[n_tads], &reg);
+		limit = TAD_LIMIT(reg);
+		if (limit <= prv) {
+			sprintf(msg, "Can't discover the memory channel");
+			return -EINVAL;
+		}
+		if  (addr <= limit)
+			break;
+		prv = limit;
+	}
+	if (n_tads == MAX_TAD) {
+		sprintf(msg, "Can't discover the memory channel");
+		return -EINVAL;
+	}
+
+	ch_way = TAD_CH(reg) + 1;
+	sck_way = TAD_SOCK(reg);
+
+	if (ch_way == 3)
+		idx = addr >> 6;
+	else {
+		idx = (addr >> (6 + sck_way + shiftup)) & 0x3;
+		if (pvt->is_chan_hash)
+			idx = haswell_chan_hash(idx, addr);
+	}
+	idx = idx % ch_way;
+
+	/*
+	 * FIXME: Shouldn't we use CHN_IDX_OFFSET() here, when ch_way == 3 ???
+	 */
+	switch (idx) {
+	case 0:
+		base_ch = TAD_TGT0(reg);
+		break;
+	case 1:
+		base_ch = TAD_TGT1(reg);
+		break;
+	case 2:
+		base_ch = TAD_TGT2(reg);
+		break;
+	case 3:
+		base_ch = TAD_TGT3(reg);
+		break;
+	default:
+		sprintf(msg, "Can't discover the TAD target");
+		return -EINVAL;
+	}
+	*channel_mask = 1 << base_ch;
+
+	pci_read_config_dword(pvt->pci_tad[base_ch], tad_ch_nilv_offset[n_tads], &tad_offset);
+
+	if (pvt->mirror_mode == FULL_MIRRORING ||
+	    (pvt->mirror_mode == ADDR_RANGE_MIRRORING && n_tads == 0)) {
+		*channel_mask |= 1 << ((base_ch + 2) % 4);
+		switch(ch_way) {
+		case 2:
+		case 4:
+			sck_xch = (1 << sck_way) * (ch_way >> 1);
+			break;
+		default:
+			sprintf(msg, "Invalid mirror set. Can't decode addr");
+			return -EINVAL;
+		}
+
+		pvt->is_cur_addr_mirrored = true;
+	} else {
+		sck_xch = (1 << sck_way) * ch_way;
+		pvt->is_cur_addr_mirrored = false;
+	}
+
+	if (pvt->is_lockstep)
+		*channel_mask |= 1 << ((base_ch + 1) % 4);
+
+	offset = TAD_OFFSET(tad_offset);
+
+	edac_dbg(0, "TAD#%d: address 0x%016Lx < 0x%016Lx, socket interleave %d, channel interleave %d (offset 0x%08Lx), index %d, base ch: %d, ch mask: 0x%02lx\n",
+		 n_tads,
+		 addr,
+		 limit,
+		 sck_way,
+		 ch_way,
+		 offset,
+		 idx,
+		 base_ch,
+		 *channel_mask);
+
+	/* Calculate channel address */
+	/* Remove the TAD offset */
+
+	if (offset > addr) {
+		sprintf(msg, "Can't calculate ch addr: TAD offset 0x%08Lx is too high for addr 0x%08Lx!",
+			offset, addr);
+		return -EINVAL;
+	}
+
+	ch_addr = addr - offset;
+	ch_addr >>= (6 + shiftup);
+	ch_addr /= sck_xch;
+	ch_addr <<= (6 + shiftup);
+	ch_addr |= addr & ((1 << (6 + shiftup)) - 1);
+
+	/*
+	 * Step 3) Decode rank
+	 */
+	for (n_rir = 0; n_rir < MAX_RIR_RANGES; n_rir++) {
+		pci_read_config_dword(pvt->pci_tad[base_ch], rir_way_limit[n_rir], &reg);
+
+		if (!IS_RIR_VALID(reg))
+			continue;
+
+		limit = pvt->info.rir_limit(reg);
+		gb = div_u64_rem(limit >> 20, 1024, &mb);
+		edac_dbg(0, "RIR#%d, limit: %u.%03u GB (0x%016Lx), way: %d\n",
+			 n_rir,
+			 gb, (mb*1000)/1024,
+			 limit,
+			 1 << RIR_WAY(reg));
+		if  (ch_addr <= limit)
+			break;
+	}
+	if (n_rir == MAX_RIR_RANGES) {
+		sprintf(msg, "Can't discover the memory rank for ch addr 0x%08Lx",
+			ch_addr);
+		return -EINVAL;
+	}
+	rir_way = RIR_WAY(reg);
+
+	if (pvt->is_close_pg)
+		idx = (ch_addr >> 6);
+	else
+		idx = (ch_addr >> 13);	/* FIXME: Datasheet says to shift by 15 */
+	idx %= 1 << rir_way;
+
+	pci_read_config_dword(pvt->pci_tad[base_ch], rir_offset[n_rir][idx], &reg);
+	*rank = RIR_RNK_TGT(pvt->info.type, reg);
+
+	edac_dbg(0, "RIR#%d: channel address 0x%08Lx < 0x%08Lx, RIR interleave %d, index %d\n",
+		 n_rir,
+		 ch_addr,
+		 limit,
+		 rir_way,
+		 idx);
+
+	return 0;
+}
+
+/****************************************************************************
+	Device initialization routines: put/get, init/exit
+ ****************************************************************************/
+
+/*
+ *	sbridge_put_all_devices	'put' all the devices that we have
+ *				reserved via 'get'
+ */
+static void sbridge_put_devices(struct sbridge_dev *sbridge_dev)
+{
+	int i;
+
+	edac_dbg(0, "\n");
+	for (i = 0; i < sbridge_dev->n_devs; i++) {
+		struct pci_dev *pdev = sbridge_dev->pdev[i];
+		if (!pdev)
+			continue;
+		edac_dbg(0, "Removing dev %02x:%02x.%d\n",
+			 pdev->bus->number,
+			 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+		pci_dev_put(pdev);
+	}
+}
+
+static void sbridge_put_all_devices(void)
+{
+	struct sbridge_dev *sbridge_dev, *tmp;
+
+	list_for_each_entry_safe(sbridge_dev, tmp, &sbridge_edac_list, list) {
+		sbridge_put_devices(sbridge_dev);
+		free_sbridge_dev(sbridge_dev);
+	}
+}
+
+static int sbridge_get_onedevice(struct pci_dev **prev,
+				 u8 *num_mc,
+				 const struct pci_id_table *table,
+				 const unsigned devno,
+				 const int multi_bus)
+{
+	struct sbridge_dev *sbridge_dev = NULL;
+	const struct pci_id_descr *dev_descr = &table->descr[devno];
+	struct pci_dev *pdev = NULL;
+	int seg = 0;
+	u8 bus = 0;
+	int i = 0;
+
+	sbridge_printk(KERN_DEBUG,
+		"Seeking for: PCI ID %04x:%04x\n",
+		PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+	pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+			      dev_descr->dev_id, *prev);
+
+	if (!pdev) {
+		if (*prev) {
+			*prev = pdev;
+			return 0;
+		}
+
+		if (dev_descr->optional)
+			return 0;
+
+		/* if the HA wasn't found */
+		if (devno == 0)
+			return -ENODEV;
+
+		sbridge_printk(KERN_INFO,
+			"Device not found: %04x:%04x\n",
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+		/* End of list, leave */
+		return -ENODEV;
+	}
+	seg = pci_domain_nr(pdev->bus);
+	bus = pdev->bus->number;
+
+next_imc:
+	sbridge_dev = get_sbridge_dev(seg, bus, dev_descr->dom,
+				      multi_bus, sbridge_dev);
+	if (!sbridge_dev) {
+		/* If the HA1 wasn't found, don't create EDAC second memory controller */
+		if (dev_descr->dom == IMC1 && devno != 1) {
+			edac_dbg(0, "Skip IMC1: %04x:%04x (since HA1 was absent)\n",
+				 PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+			pci_dev_put(pdev);
+			return 0;
+		}
+
+		if (dev_descr->dom == SOCK)
+			goto out_imc;
+
+		sbridge_dev = alloc_sbridge_dev(seg, bus, dev_descr->dom, table);
+		if (!sbridge_dev) {
+			pci_dev_put(pdev);
+			return -ENOMEM;
+		}
+		(*num_mc)++;
+	}
+
+	if (sbridge_dev->pdev[sbridge_dev->i_devs]) {
+		sbridge_printk(KERN_ERR,
+			"Duplicated device for %04x:%04x\n",
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+		pci_dev_put(pdev);
+		return -ENODEV;
+	}
+
+	sbridge_dev->pdev[sbridge_dev->i_devs++] = pdev;
+
+	/* pdev belongs to more than one IMC, do extra gets */
+	if (++i > 1)
+		pci_dev_get(pdev);
+
+	if (dev_descr->dom == SOCK && i < table->n_imcs_per_sock)
+		goto next_imc;
+
+out_imc:
+	/* Be sure that the device is enabled */
+	if (unlikely(pci_enable_device(pdev) < 0)) {
+		sbridge_printk(KERN_ERR,
+			"Couldn't enable %04x:%04x\n",
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+		return -ENODEV;
+	}
+
+	edac_dbg(0, "Detected %04x:%04x\n",
+		 PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+	/*
+	 * As stated on drivers/pci/search.c, the reference count for
+	 * @from is always decremented if it is not %NULL. So, as we need
+	 * to get all devices up to null, we need to do a get for the device
+	 */
+	pci_dev_get(pdev);
+
+	*prev = pdev;
+
+	return 0;
+}
+
+/*
+ * sbridge_get_all_devices - Find and perform 'get' operation on the MCH's
+ *			     devices we want to reference for this driver.
+ * @num_mc: pointer to the memory controllers count, to be incremented in case
+ *	    of success.
+ * @table: model specific table
+ *
+ * returns 0 in case of success or error code
+ */
+static int sbridge_get_all_devices(u8 *num_mc,
+					const struct pci_id_table *table)
+{
+	int i, rc;
+	struct pci_dev *pdev = NULL;
+	int allow_dups = 0;
+	int multi_bus = 0;
+
+	if (table->type == KNIGHTS_LANDING)
+		allow_dups = multi_bus = 1;
+	while (table && table->descr) {
+		for (i = 0; i < table->n_devs_per_sock; i++) {
+			if (!allow_dups || i == 0 ||
+					table->descr[i].dev_id !=
+						table->descr[i-1].dev_id) {
+				pdev = NULL;
+			}
+			do {
+				rc = sbridge_get_onedevice(&pdev, num_mc,
+							   table, i, multi_bus);
+				if (rc < 0) {
+					if (i == 0) {
+						i = table->n_devs_per_sock;
+						break;
+					}
+					sbridge_put_all_devices();
+					return -ENODEV;
+				}
+			} while (pdev && !allow_dups);
+		}
+		table++;
+	}
+
+	return 0;
+}
+
+/*
+ * Device IDs for {SBRIDGE,IBRIDGE,HASWELL,BROADWELL}_IMC_HA0_TAD0 are in
+ * the format: XXXa. So we can convert from a device to the corresponding
+ * channel like this
+ */
+#define TAD_DEV_TO_CHAN(dev) (((dev) & 0xf) - 0xa)
+
+static int sbridge_mci_bind_devs(struct mem_ctl_info *mci,
+				 struct sbridge_dev *sbridge_dev)
+{
+	struct sbridge_pvt *pvt = mci->pvt_info;
+	struct pci_dev *pdev;
+	u8 saw_chan_mask = 0;
+	int i;
+
+	for (i = 0; i < sbridge_dev->n_devs; i++) {
+		pdev = sbridge_dev->pdev[i];
+		if (!pdev)
+			continue;
+
+		switch (pdev->device) {
+		case PCI_DEVICE_ID_INTEL_SBRIDGE_SAD0:
+			pvt->pci_sad0 = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_SBRIDGE_SAD1:
+			pvt->pci_sad1 = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_SBRIDGE_BR:
+			pvt->pci_br0 = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0:
+			pvt->pci_ha = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA:
+			pvt->pci_ta = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_RAS:
+			pvt->pci_ras = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD0:
+		case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD1:
+		case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD2:
+		case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD3:
+		{
+			int id = TAD_DEV_TO_CHAN(pdev->device);
+			pvt->pci_tad[id] = pdev;
+			saw_chan_mask |= 1 << id;
+		}
+			break;
+		case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_DDRIO:
+			pvt->pci_ddrio = pdev;
+			break;
+		default:
+			goto error;
+		}
+
+		edac_dbg(0, "Associated PCI %02x:%02x, bus %d with dev = %p\n",
+			 pdev->vendor, pdev->device,
+			 sbridge_dev->bus,
+			 pdev);
+	}
+
+	/* Check if everything were registered */
+	if (!pvt->pci_sad0 || !pvt->pci_sad1 || !pvt->pci_ha ||
+	    !pvt->pci_ras || !pvt->pci_ta)
+		goto enodev;
+
+	if (saw_chan_mask != 0x0f)
+		goto enodev;
+	return 0;
+
+enodev:
+	sbridge_printk(KERN_ERR, "Some needed devices are missing\n");
+	return -ENODEV;
+
+error:
+	sbridge_printk(KERN_ERR, "Unexpected device %02x:%02x\n",
+		       PCI_VENDOR_ID_INTEL, pdev->device);
+	return -EINVAL;
+}
+
+static int ibridge_mci_bind_devs(struct mem_ctl_info *mci,
+				 struct sbridge_dev *sbridge_dev)
+{
+	struct sbridge_pvt *pvt = mci->pvt_info;
+	struct pci_dev *pdev;
+	u8 saw_chan_mask = 0;
+	int i;
+
+	for (i = 0; i < sbridge_dev->n_devs; i++) {
+		pdev = sbridge_dev->pdev[i];
+		if (!pdev)
+			continue;
+
+		switch (pdev->device) {
+		case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0:
+		case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1:
+			pvt->pci_ha = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TA:
+		case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TA:
+			pvt->pci_ta = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_RAS:
+		case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_RAS:
+			pvt->pci_ras = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD0:
+		case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD1:
+		case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD2:
+		case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD3:
+		case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD0:
+		case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD1:
+		case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD2:
+		case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD3:
+		{
+			int id = TAD_DEV_TO_CHAN(pdev->device);
+			pvt->pci_tad[id] = pdev;
+			saw_chan_mask |= 1 << id;
+		}
+			break;
+		case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_2HA_DDRIO0:
+			pvt->pci_ddrio = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_1HA_DDRIO0:
+			pvt->pci_ddrio = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_IBRIDGE_SAD:
+			pvt->pci_sad0 = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_IBRIDGE_BR0:
+			pvt->pci_br0 = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_IBRIDGE_BR1:
+			pvt->pci_br1 = pdev;
+			break;
+		default:
+			goto error;
+		}
+
+		edac_dbg(0, "Associated PCI %02x.%02d.%d with dev = %p\n",
+			 sbridge_dev->bus,
+			 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+			 pdev);
+	}
+
+	/* Check if everything were registered */
+	if (!pvt->pci_sad0 || !pvt->pci_ha || !pvt->pci_br0 ||
+	    !pvt->pci_br1 || !pvt->pci_ras || !pvt->pci_ta)
+		goto enodev;
+
+	if (saw_chan_mask != 0x0f && /* -EN/-EX */
+	    saw_chan_mask != 0x03)   /* -EP */
+		goto enodev;
+	return 0;
+
+enodev:
+	sbridge_printk(KERN_ERR, "Some needed devices are missing\n");
+	return -ENODEV;
+
+error:
+	sbridge_printk(KERN_ERR,
+		       "Unexpected device %02x:%02x\n", PCI_VENDOR_ID_INTEL,
+			pdev->device);
+	return -EINVAL;
+}
+
+static int haswell_mci_bind_devs(struct mem_ctl_info *mci,
+				 struct sbridge_dev *sbridge_dev)
+{
+	struct sbridge_pvt *pvt = mci->pvt_info;
+	struct pci_dev *pdev;
+	u8 saw_chan_mask = 0;
+	int i;
+
+	/* there's only one device per system; not tied to any bus */
+	if (pvt->info.pci_vtd == NULL)
+		/* result will be checked later */
+		pvt->info.pci_vtd = pci_get_device(PCI_VENDOR_ID_INTEL,
+						   PCI_DEVICE_ID_INTEL_HASWELL_IMC_VTD_MISC,
+						   NULL);
+
+	for (i = 0; i < sbridge_dev->n_devs; i++) {
+		pdev = sbridge_dev->pdev[i];
+		if (!pdev)
+			continue;
+
+		switch (pdev->device) {
+		case PCI_DEVICE_ID_INTEL_HASWELL_IMC_CBO_SAD0:
+			pvt->pci_sad0 = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_HASWELL_IMC_CBO_SAD1:
+			pvt->pci_sad1 = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0:
+		case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1:
+			pvt->pci_ha = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TA:
+		case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TA:
+			pvt->pci_ta = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TM:
+		case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TM:
+			pvt->pci_ras = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD0:
+		case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD1:
+		case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD2:
+		case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD3:
+		case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD0:
+		case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD1:
+		case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD2:
+		case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD3:
+		{
+			int id = TAD_DEV_TO_CHAN(pdev->device);
+			pvt->pci_tad[id] = pdev;
+			saw_chan_mask |= 1 << id;
+		}
+			break;
+		case PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO0:
+		case PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO1:
+		case PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO2:
+		case PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO3:
+			if (!pvt->pci_ddrio)
+				pvt->pci_ddrio = pdev;
+			break;
+		default:
+			break;
+		}
+
+		edac_dbg(0, "Associated PCI %02x.%02d.%d with dev = %p\n",
+			 sbridge_dev->bus,
+			 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+			 pdev);
+	}
+
+	/* Check if everything were registered */
+	if (!pvt->pci_sad0 || !pvt->pci_ha || !pvt->pci_sad1 ||
+	    !pvt->pci_ras  || !pvt->pci_ta || !pvt->info.pci_vtd)
+		goto enodev;
+
+	if (saw_chan_mask != 0x0f && /* -EN/-EX */
+	    saw_chan_mask != 0x03)   /* -EP */
+		goto enodev;
+	return 0;
+
+enodev:
+	sbridge_printk(KERN_ERR, "Some needed devices are missing\n");
+	return -ENODEV;
+}
+
+static int broadwell_mci_bind_devs(struct mem_ctl_info *mci,
+				 struct sbridge_dev *sbridge_dev)
+{
+	struct sbridge_pvt *pvt = mci->pvt_info;
+	struct pci_dev *pdev;
+	u8 saw_chan_mask = 0;
+	int i;
+
+	/* there's only one device per system; not tied to any bus */
+	if (pvt->info.pci_vtd == NULL)
+		/* result will be checked later */
+		pvt->info.pci_vtd = pci_get_device(PCI_VENDOR_ID_INTEL,
+						   PCI_DEVICE_ID_INTEL_BROADWELL_IMC_VTD_MISC,
+						   NULL);
+
+	for (i = 0; i < sbridge_dev->n_devs; i++) {
+		pdev = sbridge_dev->pdev[i];
+		if (!pdev)
+			continue;
+
+		switch (pdev->device) {
+		case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_CBO_SAD0:
+			pvt->pci_sad0 = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_CBO_SAD1:
+			pvt->pci_sad1 = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0:
+		case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1:
+			pvt->pci_ha = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TA:
+		case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TA:
+			pvt->pci_ta = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TM:
+		case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TM:
+			pvt->pci_ras = pdev;
+			break;
+		case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD0:
+		case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD1:
+		case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD2:
+		case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD3:
+		case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD0:
+		case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD1:
+		case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD2:
+		case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD3:
+		{
+			int id = TAD_DEV_TO_CHAN(pdev->device);
+			pvt->pci_tad[id] = pdev;
+			saw_chan_mask |= 1 << id;
+		}
+			break;
+		case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_DDRIO0:
+			pvt->pci_ddrio = pdev;
+			break;
+		default:
+			break;
+		}
+
+		edac_dbg(0, "Associated PCI %02x.%02d.%d with dev = %p\n",
+			 sbridge_dev->bus,
+			 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+			 pdev);
+	}
+
+	/* Check if everything were registered */
+	if (!pvt->pci_sad0 || !pvt->pci_ha || !pvt->pci_sad1 ||
+	    !pvt->pci_ras  || !pvt->pci_ta || !pvt->info.pci_vtd)
+		goto enodev;
+
+	if (saw_chan_mask != 0x0f && /* -EN/-EX */
+	    saw_chan_mask != 0x03)   /* -EP */
+		goto enodev;
+	return 0;
+
+enodev:
+	sbridge_printk(KERN_ERR, "Some needed devices are missing\n");
+	return -ENODEV;
+}
+
+static int knl_mci_bind_devs(struct mem_ctl_info *mci,
+			struct sbridge_dev *sbridge_dev)
+{
+	struct sbridge_pvt *pvt = mci->pvt_info;
+	struct pci_dev *pdev;
+	int dev, func;
+
+	int i;
+	int devidx;
+
+	for (i = 0; i < sbridge_dev->n_devs; i++) {
+		pdev = sbridge_dev->pdev[i];
+		if (!pdev)
+			continue;
+
+		/* Extract PCI device and function. */
+		dev = (pdev->devfn >> 3) & 0x1f;
+		func = pdev->devfn & 0x7;
+
+		switch (pdev->device) {
+		case PCI_DEVICE_ID_INTEL_KNL_IMC_MC:
+			if (dev == 8)
+				pvt->knl.pci_mc0 = pdev;
+			else if (dev == 9)
+				pvt->knl.pci_mc1 = pdev;
+			else {
+				sbridge_printk(KERN_ERR,
+					"Memory controller in unexpected place! (dev %d, fn %d)\n",
+					dev, func);
+				continue;
+			}
+			break;
+
+		case PCI_DEVICE_ID_INTEL_KNL_IMC_SAD0:
+			pvt->pci_sad0 = pdev;
+			break;
+
+		case PCI_DEVICE_ID_INTEL_KNL_IMC_SAD1:
+			pvt->pci_sad1 = pdev;
+			break;
+
+		case PCI_DEVICE_ID_INTEL_KNL_IMC_CHA:
+			/* There are one of these per tile, and range from
+			 * 1.14.0 to 1.18.5.
+			 */
+			devidx = ((dev-14)*8)+func;
+
+			if (devidx < 0 || devidx >= KNL_MAX_CHAS) {
+				sbridge_printk(KERN_ERR,
+					"Caching and Home Agent in unexpected place! (dev %d, fn %d)\n",
+					dev, func);
+				continue;
+			}
+
+			WARN_ON(pvt->knl.pci_cha[devidx] != NULL);
+
+			pvt->knl.pci_cha[devidx] = pdev;
+			break;
+
+		case PCI_DEVICE_ID_INTEL_KNL_IMC_CHAN:
+			devidx = -1;
+
+			/*
+			 *  MC0 channels 0-2 are device 9 function 2-4,
+			 *  MC1 channels 3-5 are device 8 function 2-4.
+			 */
+
+			if (dev == 9)
+				devidx = func-2;
+			else if (dev == 8)
+				devidx = 3 + (func-2);
+
+			if (devidx < 0 || devidx >= KNL_MAX_CHANNELS) {
+				sbridge_printk(KERN_ERR,
+					"DRAM Channel Registers in unexpected place! (dev %d, fn %d)\n",
+					dev, func);
+				continue;
+			}
+
+			WARN_ON(pvt->knl.pci_channel[devidx] != NULL);
+			pvt->knl.pci_channel[devidx] = pdev;
+			break;
+
+		case PCI_DEVICE_ID_INTEL_KNL_IMC_TOLHM:
+			pvt->knl.pci_mc_info = pdev;
+			break;
+
+		case PCI_DEVICE_ID_INTEL_KNL_IMC_TA:
+			pvt->pci_ta = pdev;
+			break;
+
+		default:
+			sbridge_printk(KERN_ERR, "Unexpected device %d\n",
+				pdev->device);
+			break;
+		}
+	}
+
+	if (!pvt->knl.pci_mc0  || !pvt->knl.pci_mc1 ||
+	    !pvt->pci_sad0     || !pvt->pci_sad1    ||
+	    !pvt->pci_ta) {
+		goto enodev;
+	}
+
+	for (i = 0; i < KNL_MAX_CHANNELS; i++) {
+		if (!pvt->knl.pci_channel[i]) {
+			sbridge_printk(KERN_ERR, "Missing channel %d\n", i);
+			goto enodev;
+		}
+	}
+
+	for (i = 0; i < KNL_MAX_CHAS; i++) {
+		if (!pvt->knl.pci_cha[i]) {
+			sbridge_printk(KERN_ERR, "Missing CHA %d\n", i);
+			goto enodev;
+		}
+	}
+
+	return 0;
+
+enodev:
+	sbridge_printk(KERN_ERR, "Some needed devices are missing\n");
+	return -ENODEV;
+}
+
+/****************************************************************************
+			Error check routines
+ ****************************************************************************/
+
+/*
+ * While Sandy Bridge has error count registers, SMI BIOS read values from
+ * and resets the counters. So, they are not reliable for the OS to read
+ * from them. So, we have no option but to just trust on whatever MCE is
+ * telling us about the errors.
+ */
+static void sbridge_mce_output_error(struct mem_ctl_info *mci,
+				    const struct mce *m)
+{
+	struct mem_ctl_info *new_mci;
+	struct sbridge_pvt *pvt = mci->pvt_info;
+	enum hw_event_mc_err_type tp_event;
+	char *type, *optype, msg[256];
+	bool ripv = GET_BITFIELD(m->mcgstatus, 0, 0);
+	bool overflow = GET_BITFIELD(m->status, 62, 62);
+	bool uncorrected_error = GET_BITFIELD(m->status, 61, 61);
+	bool recoverable;
+	u32 core_err_cnt = GET_BITFIELD(m->status, 38, 52);
+	u32 mscod = GET_BITFIELD(m->status, 16, 31);
+	u32 errcode = GET_BITFIELD(m->status, 0, 15);
+	u32 channel = GET_BITFIELD(m->status, 0, 3);
+	u32 optypenum = GET_BITFIELD(m->status, 4, 6);
+	long channel_mask, first_channel;
+	u8  rank, socket, ha;
+	int rc, dimm;
+	char *area_type = NULL;
+
+	if (pvt->info.type != SANDY_BRIDGE)
+		recoverable = true;
+	else
+		recoverable = GET_BITFIELD(m->status, 56, 56);
+
+	if (uncorrected_error) {
+		core_err_cnt = 1;
+		if (ripv) {
+			type = "FATAL";
+			tp_event = HW_EVENT_ERR_FATAL;
+		} else {
+			type = "NON_FATAL";
+			tp_event = HW_EVENT_ERR_UNCORRECTED;
+		}
+	} else {
+		type = "CORRECTED";
+		tp_event = HW_EVENT_ERR_CORRECTED;
+	}
+
+	/*
+	 * According with Table 15-9 of the Intel Architecture spec vol 3A,
+	 * memory errors should fit in this mask:
+	 *	000f 0000 1mmm cccc (binary)
+	 * where:
+	 *	f = Correction Report Filtering Bit. If 1, subsequent errors
+	 *	    won't be shown
+	 *	mmm = error type
+	 *	cccc = channel
+	 * If the mask doesn't match, report an error to the parsing logic
+	 */
+	switch (optypenum) {
+	case 0:
+		optype = "generic undef request error";
+		break;
+	case 1:
+		optype = "memory read error";
+		break;
+	case 2:
+		optype = "memory write error";
+		break;
+	case 3:
+		optype = "addr/cmd error";
+		break;
+	case 4:
+		optype = "memory scrubbing error";
+		break;
+	default:
+		optype = "reserved";
+		break;
+	}
+
+	if (pvt->info.type == KNIGHTS_LANDING) {
+		if (channel == 14) {
+			edac_dbg(0, "%s%s err_code:%04x:%04x EDRAM bank %d\n",
+				overflow ? " OVERFLOW" : "",
+				(uncorrected_error && recoverable)
+				? " recoverable" : "",
+				mscod, errcode,
+				m->bank);
+		} else {
+			char A = *("A");
+
+			/*
+			 * Reported channel is in range 0-2, so we can't map it
+			 * back to mc. To figure out mc we check machine check
+			 * bank register that reported this error.
+			 * bank15 means mc0 and bank16 means mc1.
+			 */
+			channel = knl_channel_remap(m->bank == 16, channel);
+			channel_mask = 1 << channel;
+
+			snprintf(msg, sizeof(msg),
+				"%s%s err_code:%04x:%04x channel:%d (DIMM_%c)",
+				overflow ? " OVERFLOW" : "",
+				(uncorrected_error && recoverable)
+				? " recoverable" : " ",
+				mscod, errcode, channel, A + channel);
+			edac_mc_handle_error(tp_event, mci, core_err_cnt,
+				m->addr >> PAGE_SHIFT, m->addr & ~PAGE_MASK, 0,
+				channel, 0, -1,
+				optype, msg);
+		}
+		return;
+	} else {
+		rc = get_memory_error_data(mci, m->addr, &socket, &ha,
+				&channel_mask, &rank, &area_type, msg);
+	}
+
+	if (rc < 0)
+		goto err_parsing;
+	new_mci = get_mci_for_node_id(socket, ha);
+	if (!new_mci) {
+		strcpy(msg, "Error: socket got corrupted!");
+		goto err_parsing;
+	}
+	mci = new_mci;
+	pvt = mci->pvt_info;
+
+	first_channel = find_first_bit(&channel_mask, NUM_CHANNELS);
+
+	if (rank < 4)
+		dimm = 0;
+	else if (rank < 8)
+		dimm = 1;
+	else
+		dimm = 2;
+
+
+	/*
+	 * FIXME: On some memory configurations (mirror, lockstep), the
+	 * Memory Controller can't point the error to a single DIMM. The
+	 * EDAC core should be handling the channel mask, in order to point
+	 * to the group of dimm's where the error may be happening.
+	 */
+	if (!pvt->is_lockstep && !pvt->is_cur_addr_mirrored && !pvt->is_close_pg)
+		channel = first_channel;
+
+	snprintf(msg, sizeof(msg),
+		 "%s%s area:%s err_code:%04x:%04x socket:%d ha:%d channel_mask:%ld rank:%d",
+		 overflow ? " OVERFLOW" : "",
+		 (uncorrected_error && recoverable) ? " recoverable" : "",
+		 area_type,
+		 mscod, errcode,
+		 socket, ha,
+		 channel_mask,
+		 rank);
+
+	edac_dbg(0, "%s\n", msg);
+
+	/* FIXME: need support for channel mask */
+
+	if (channel == CHANNEL_UNSPECIFIED)
+		channel = -1;
+
+	/* Call the helper to output message */
+	edac_mc_handle_error(tp_event, mci, core_err_cnt,
+			     m->addr >> PAGE_SHIFT, m->addr & ~PAGE_MASK, 0,
+			     channel, dimm, -1,
+			     optype, msg);
+	return;
+err_parsing:
+	edac_mc_handle_error(tp_event, mci, core_err_cnt, 0, 0, 0,
+			     -1, -1, -1,
+			     msg, "");
+
+}
+
+/*
+ * Check that logging is enabled and that this is the right type
+ * of error for us to handle.
+ */
+static int sbridge_mce_check_error(struct notifier_block *nb, unsigned long val,
+				   void *data)
+{
+	struct mce *mce = (struct mce *)data;
+	struct mem_ctl_info *mci;
+	char *type;
+
+	if (edac_get_report_status() == EDAC_REPORTING_DISABLED)
+		return NOTIFY_DONE;
+
+	/*
+	 * Just let mcelog handle it if the error is
+	 * outside the memory controller. A memory error
+	 * is indicated by bit 7 = 1 and bits = 8-11,13-15 = 0.
+	 * bit 12 has an special meaning.
+	 */
+	if ((mce->status & 0xefff) >> 7 != 1)
+		return NOTIFY_DONE;
+
+	/* Check ADDRV bit in STATUS */
+	if (!GET_BITFIELD(mce->status, 58, 58))
+		return NOTIFY_DONE;
+
+	/* Check MISCV bit in STATUS */
+	if (!GET_BITFIELD(mce->status, 59, 59))
+		return NOTIFY_DONE;
+
+	/* Check address type in MISC (physical address only) */
+	if (GET_BITFIELD(mce->misc, 6, 8) != 2)
+		return NOTIFY_DONE;
+
+	mci = get_mci_for_node_id(mce->socketid, IMC0);
+	if (!mci)
+		return NOTIFY_DONE;
+
+	if (mce->mcgstatus & MCG_STATUS_MCIP)
+		type = "Exception";
+	else
+		type = "Event";
+
+	sbridge_mc_printk(mci, KERN_DEBUG, "HANDLING MCE MEMORY ERROR\n");
+
+	sbridge_mc_printk(mci, KERN_DEBUG, "CPU %d: Machine Check %s: %Lx "
+			  "Bank %d: %016Lx\n", mce->extcpu, type,
+			  mce->mcgstatus, mce->bank, mce->status);
+	sbridge_mc_printk(mci, KERN_DEBUG, "TSC %llx ", mce->tsc);
+	sbridge_mc_printk(mci, KERN_DEBUG, "ADDR %llx ", mce->addr);
+	sbridge_mc_printk(mci, KERN_DEBUG, "MISC %llx ", mce->misc);
+
+	sbridge_mc_printk(mci, KERN_DEBUG, "PROCESSOR %u:%x TIME %llu SOCKET "
+			  "%u APIC %x\n", mce->cpuvendor, mce->cpuid,
+			  mce->time, mce->socketid, mce->apicid);
+
+	sbridge_mce_output_error(mci, mce);
+
+	/* Advice mcelog that the error were handled */
+	return NOTIFY_STOP;
+}
+
+static struct notifier_block sbridge_mce_dec = {
+	.notifier_call	= sbridge_mce_check_error,
+	.priority	= MCE_PRIO_EDAC,
+};
+
+/****************************************************************************
+			EDAC register/unregister logic
+ ****************************************************************************/
+
+static void sbridge_unregister_mci(struct sbridge_dev *sbridge_dev)
+{
+	struct mem_ctl_info *mci = sbridge_dev->mci;
+	struct sbridge_pvt *pvt;
+
+	if (unlikely(!mci || !mci->pvt_info)) {
+		edac_dbg(0, "MC: dev = %p\n", &sbridge_dev->pdev[0]->dev);
+
+		sbridge_printk(KERN_ERR, "Couldn't find mci handler\n");
+		return;
+	}
+
+	pvt = mci->pvt_info;
+
+	edac_dbg(0, "MC: mci = %p, dev = %p\n",
+		 mci, &sbridge_dev->pdev[0]->dev);
+
+	/* Remove MC sysfs nodes */
+	edac_mc_del_mc(mci->pdev);
+
+	edac_dbg(1, "%s: free mci struct\n", mci->ctl_name);
+	kfree(mci->ctl_name);
+	edac_mc_free(mci);
+	sbridge_dev->mci = NULL;
+}
+
+static int sbridge_register_mci(struct sbridge_dev *sbridge_dev, enum type type)
+{
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[2];
+	struct sbridge_pvt *pvt;
+	struct pci_dev *pdev = sbridge_dev->pdev[0];
+	int rc;
+
+	/* allocate a new MC control structure */
+	layers[0].type = EDAC_MC_LAYER_CHANNEL;
+	layers[0].size = type == KNIGHTS_LANDING ?
+		KNL_MAX_CHANNELS : NUM_CHANNELS;
+	layers[0].is_virt_csrow = false;
+	layers[1].type = EDAC_MC_LAYER_SLOT;
+	layers[1].size = type == KNIGHTS_LANDING ? 1 : MAX_DIMMS;
+	layers[1].is_virt_csrow = true;
+	mci = edac_mc_alloc(sbridge_dev->mc, ARRAY_SIZE(layers), layers,
+			    sizeof(*pvt));
+
+	if (unlikely(!mci))
+		return -ENOMEM;
+
+	edac_dbg(0, "MC: mci = %p, dev = %p\n",
+		 mci, &pdev->dev);
+
+	pvt = mci->pvt_info;
+	memset(pvt, 0, sizeof(*pvt));
+
+	/* Associate sbridge_dev and mci for future usage */
+	pvt->sbridge_dev = sbridge_dev;
+	sbridge_dev->mci = mci;
+
+	mci->mtype_cap = type == KNIGHTS_LANDING ?
+		MEM_FLAG_DDR4 : MEM_FLAG_DDR3;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE;
+	mci->edac_cap = EDAC_FLAG_NONE;
+	mci->mod_name = EDAC_MOD_STR;
+	mci->dev_name = pci_name(pdev);
+	mci->ctl_page_to_phys = NULL;
+
+	pvt->info.type = type;
+	switch (type) {
+	case IVY_BRIDGE:
+		pvt->info.rankcfgr = IB_RANK_CFG_A;
+		pvt->info.get_tolm = ibridge_get_tolm;
+		pvt->info.get_tohm = ibridge_get_tohm;
+		pvt->info.dram_rule = ibridge_dram_rule;
+		pvt->info.get_memory_type = get_memory_type;
+		pvt->info.get_node_id = get_node_id;
+		pvt->info.rir_limit = rir_limit;
+		pvt->info.sad_limit = sad_limit;
+		pvt->info.interleave_mode = interleave_mode;
+		pvt->info.dram_attr = dram_attr;
+		pvt->info.max_sad = ARRAY_SIZE(ibridge_dram_rule);
+		pvt->info.interleave_list = ibridge_interleave_list;
+		pvt->info.interleave_pkg = ibridge_interleave_pkg;
+		pvt->info.get_width = ibridge_get_width;
+
+		/* Store pci devices at mci for faster access */
+		rc = ibridge_mci_bind_devs(mci, sbridge_dev);
+		if (unlikely(rc < 0))
+			goto fail0;
+		get_source_id(mci);
+		mci->ctl_name = kasprintf(GFP_KERNEL, "Ivy Bridge SrcID#%d_Ha#%d",
+			pvt->sbridge_dev->source_id, pvt->sbridge_dev->dom);
+		break;
+	case SANDY_BRIDGE:
+		pvt->info.rankcfgr = SB_RANK_CFG_A;
+		pvt->info.get_tolm = sbridge_get_tolm;
+		pvt->info.get_tohm = sbridge_get_tohm;
+		pvt->info.dram_rule = sbridge_dram_rule;
+		pvt->info.get_memory_type = get_memory_type;
+		pvt->info.get_node_id = get_node_id;
+		pvt->info.rir_limit = rir_limit;
+		pvt->info.sad_limit = sad_limit;
+		pvt->info.interleave_mode = interleave_mode;
+		pvt->info.dram_attr = dram_attr;
+		pvt->info.max_sad = ARRAY_SIZE(sbridge_dram_rule);
+		pvt->info.interleave_list = sbridge_interleave_list;
+		pvt->info.interleave_pkg = sbridge_interleave_pkg;
+		pvt->info.get_width = sbridge_get_width;
+
+		/* Store pci devices at mci for faster access */
+		rc = sbridge_mci_bind_devs(mci, sbridge_dev);
+		if (unlikely(rc < 0))
+			goto fail0;
+		get_source_id(mci);
+		mci->ctl_name = kasprintf(GFP_KERNEL, "Sandy Bridge SrcID#%d_Ha#%d",
+			pvt->sbridge_dev->source_id, pvt->sbridge_dev->dom);
+		break;
+	case HASWELL:
+		/* rankcfgr isn't used */
+		pvt->info.get_tolm = haswell_get_tolm;
+		pvt->info.get_tohm = haswell_get_tohm;
+		pvt->info.dram_rule = ibridge_dram_rule;
+		pvt->info.get_memory_type = haswell_get_memory_type;
+		pvt->info.get_node_id = haswell_get_node_id;
+		pvt->info.rir_limit = haswell_rir_limit;
+		pvt->info.sad_limit = sad_limit;
+		pvt->info.interleave_mode = interleave_mode;
+		pvt->info.dram_attr = dram_attr;
+		pvt->info.max_sad = ARRAY_SIZE(ibridge_dram_rule);
+		pvt->info.interleave_list = ibridge_interleave_list;
+		pvt->info.interleave_pkg = ibridge_interleave_pkg;
+		pvt->info.get_width = ibridge_get_width;
+
+		/* Store pci devices at mci for faster access */
+		rc = haswell_mci_bind_devs(mci, sbridge_dev);
+		if (unlikely(rc < 0))
+			goto fail0;
+		get_source_id(mci);
+		mci->ctl_name = kasprintf(GFP_KERNEL, "Haswell SrcID#%d_Ha#%d",
+			pvt->sbridge_dev->source_id, pvt->sbridge_dev->dom);
+		break;
+	case BROADWELL:
+		/* rankcfgr isn't used */
+		pvt->info.get_tolm = haswell_get_tolm;
+		pvt->info.get_tohm = haswell_get_tohm;
+		pvt->info.dram_rule = ibridge_dram_rule;
+		pvt->info.get_memory_type = haswell_get_memory_type;
+		pvt->info.get_node_id = haswell_get_node_id;
+		pvt->info.rir_limit = haswell_rir_limit;
+		pvt->info.sad_limit = sad_limit;
+		pvt->info.interleave_mode = interleave_mode;
+		pvt->info.dram_attr = dram_attr;
+		pvt->info.max_sad = ARRAY_SIZE(ibridge_dram_rule);
+		pvt->info.interleave_list = ibridge_interleave_list;
+		pvt->info.interleave_pkg = ibridge_interleave_pkg;
+		pvt->info.get_width = broadwell_get_width;
+
+		/* Store pci devices at mci for faster access */
+		rc = broadwell_mci_bind_devs(mci, sbridge_dev);
+		if (unlikely(rc < 0))
+			goto fail0;
+		get_source_id(mci);
+		mci->ctl_name = kasprintf(GFP_KERNEL, "Broadwell SrcID#%d_Ha#%d",
+			pvt->sbridge_dev->source_id, pvt->sbridge_dev->dom);
+		break;
+	case KNIGHTS_LANDING:
+		/* pvt->info.rankcfgr == ??? */
+		pvt->info.get_tolm = knl_get_tolm;
+		pvt->info.get_tohm = knl_get_tohm;
+		pvt->info.dram_rule = knl_dram_rule;
+		pvt->info.get_memory_type = knl_get_memory_type;
+		pvt->info.get_node_id = knl_get_node_id;
+		pvt->info.rir_limit = NULL;
+		pvt->info.sad_limit = knl_sad_limit;
+		pvt->info.interleave_mode = knl_interleave_mode;
+		pvt->info.dram_attr = dram_attr_knl;
+		pvt->info.max_sad = ARRAY_SIZE(knl_dram_rule);
+		pvt->info.interleave_list = knl_interleave_list;
+		pvt->info.interleave_pkg = ibridge_interleave_pkg;
+		pvt->info.get_width = knl_get_width;
+
+		rc = knl_mci_bind_devs(mci, sbridge_dev);
+		if (unlikely(rc < 0))
+			goto fail0;
+		get_source_id(mci);
+		mci->ctl_name = kasprintf(GFP_KERNEL, "Knights Landing SrcID#%d_Ha#%d",
+			pvt->sbridge_dev->source_id, pvt->sbridge_dev->dom);
+		break;
+	}
+
+	if (!mci->ctl_name) {
+		rc = -ENOMEM;
+		goto fail0;
+	}
+
+	/* Get dimm basic config and the memory layout */
+	rc = get_dimm_config(mci);
+	if (rc < 0) {
+		edac_dbg(0, "MC: failed to get_dimm_config()\n");
+		goto fail;
+	}
+	get_memory_layout(mci);
+
+	/* record ptr to the generic device */
+	mci->pdev = &pdev->dev;
+
+	/* add this new MC control structure to EDAC's list of MCs */
+	if (unlikely(edac_mc_add_mc(mci))) {
+		edac_dbg(0, "MC: failed edac_mc_add_mc()\n");
+		rc = -EINVAL;
+		goto fail;
+	}
+
+	return 0;
+
+fail:
+	kfree(mci->ctl_name);
+fail0:
+	edac_mc_free(mci);
+	sbridge_dev->mci = NULL;
+	return rc;
+}
+
+#define ICPU(model, table) \
+	{ X86_VENDOR_INTEL, 6, model, 0, (unsigned long)&table }
+
+static const struct x86_cpu_id sbridge_cpuids[] = {
+	ICPU(INTEL_FAM6_SANDYBRIDGE_X,	  pci_dev_descr_sbridge_table),
+	ICPU(INTEL_FAM6_IVYBRIDGE_X,	  pci_dev_descr_ibridge_table),
+	ICPU(INTEL_FAM6_HASWELL_X,	  pci_dev_descr_haswell_table),
+	ICPU(INTEL_FAM6_BROADWELL_X,	  pci_dev_descr_broadwell_table),
+	ICPU(INTEL_FAM6_BROADWELL_XEON_D, pci_dev_descr_broadwell_table),
+	ICPU(INTEL_FAM6_XEON_PHI_KNL,	  pci_dev_descr_knl_table),
+	ICPU(INTEL_FAM6_XEON_PHI_KNM,	  pci_dev_descr_knl_table),
+	{ }
+};
+MODULE_DEVICE_TABLE(x86cpu, sbridge_cpuids);
+
+/*
+ *	sbridge_probe	Get all devices and register memory controllers
+ *			present.
+ *	return:
+ *		0 for FOUND a device
+ *		< 0 for error code
+ */
+
+static int sbridge_probe(const struct x86_cpu_id *id)
+{
+	int rc = -ENODEV;
+	u8 mc, num_mc = 0;
+	struct sbridge_dev *sbridge_dev;
+	struct pci_id_table *ptable = (struct pci_id_table *)id->driver_data;
+
+	/* get the pci devices we want to reserve for our use */
+	rc = sbridge_get_all_devices(&num_mc, ptable);
+
+	if (unlikely(rc < 0)) {
+		edac_dbg(0, "couldn't get all devices\n");
+		goto fail0;
+	}
+
+	mc = 0;
+
+	list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) {
+		edac_dbg(0, "Registering MC#%d (%d of %d)\n",
+			 mc, mc + 1, num_mc);
+
+		sbridge_dev->mc = mc++;
+		rc = sbridge_register_mci(sbridge_dev, ptable->type);
+		if (unlikely(rc < 0))
+			goto fail1;
+	}
+
+	sbridge_printk(KERN_INFO, "%s\n", SBRIDGE_REVISION);
+
+	return 0;
+
+fail1:
+	list_for_each_entry(sbridge_dev, &sbridge_edac_list, list)
+		sbridge_unregister_mci(sbridge_dev);
+
+	sbridge_put_all_devices();
+fail0:
+	return rc;
+}
+
+/*
+ *	sbridge_remove	cleanup
+ *
+ */
+static void sbridge_remove(void)
+{
+	struct sbridge_dev *sbridge_dev;
+
+	edac_dbg(0, "\n");
+
+	list_for_each_entry(sbridge_dev, &sbridge_edac_list, list)
+		sbridge_unregister_mci(sbridge_dev);
+
+	/* Release PCI resources */
+	sbridge_put_all_devices();
+}
+
+/*
+ *	sbridge_init		Module entry function
+ *			Try to initialize this module for its devices
+ */
+static int __init sbridge_init(void)
+{
+	const struct x86_cpu_id *id;
+	const char *owner;
+	int rc;
+
+	edac_dbg(2, "\n");
+
+	owner = edac_get_owner();
+	if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR)))
+		return -EBUSY;
+
+	id = x86_match_cpu(sbridge_cpuids);
+	if (!id)
+		return -ENODEV;
+
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
+
+	rc = sbridge_probe(id);
+
+	if (rc >= 0) {
+		mce_register_decode_chain(&sbridge_mce_dec);
+		if (edac_get_report_status() == EDAC_REPORTING_DISABLED)
+			sbridge_printk(KERN_WARNING, "Loading driver, error reporting disabled.\n");
+		return 0;
+	}
+
+	sbridge_printk(KERN_ERR, "Failed to register device with error %d.\n",
+		      rc);
+
+	return rc;
+}
+
+/*
+ *	sbridge_exit()	Module exit function
+ *			Unregister the driver
+ */
+static void __exit sbridge_exit(void)
+{
+	edac_dbg(2, "\n");
+	sbridge_remove();
+	mce_unregister_decode_chain(&sbridge_mce_dec);
+}
+
+module_init(sbridge_init);
+module_exit(sbridge_exit);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("MC Driver for Intel Sandy Bridge and Ivy Bridge memory controllers - "
+		   SBRIDGE_REVISION);
diff --git a/drivers/edac/skx_edac.c b/drivers/edac/skx_edac.c
new file mode 100644
index 000000000..dd209e0dd
--- /dev/null
+++ b/drivers/edac/skx_edac.c
@@ -0,0 +1,1190 @@
+/*
+ * EDAC driver for Intel(R) Xeon(R) Skylake processors
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/edac.h>
+#include <linux/mmzone.h>
+#include <linux/smp.h>
+#include <linux/bitmap.h>
+#include <linux/math64.h>
+#include <linux/mod_devicetable.h>
+#include <acpi/nfit.h>
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+#include <asm/processor.h>
+#include <asm/mce.h>
+
+#include "edac_module.h"
+
+#define EDAC_MOD_STR    "skx_edac"
+
+/*
+ * Debug macros
+ */
+#define skx_printk(level, fmt, arg...)			\
+	edac_printk(level, "skx", fmt, ##arg)
+
+#define skx_mc_printk(mci, level, fmt, arg...)		\
+	edac_mc_chipset_printk(mci, level, "skx", fmt, ##arg)
+
+/*
+ * Get a bit field at register value <v>, from bit <lo> to bit <hi>
+ */
+#define GET_BITFIELD(v, lo, hi) \
+	(((v) & GENMASK_ULL((hi), (lo))) >> (lo))
+
+static LIST_HEAD(skx_edac_list);
+
+static u64 skx_tolm, skx_tohm;
+
+#define NUM_IMC			2	/* memory controllers per socket */
+#define NUM_CHANNELS		3	/* channels per memory controller */
+#define NUM_DIMMS		2	/* Max DIMMS per channel */
+
+#define	MASK26	0x3FFFFFF		/* Mask for 2^26 */
+#define MASK29	0x1FFFFFFF		/* Mask for 2^29 */
+
+/*
+ * Each cpu socket contains some pci devices that provide global
+ * information, and also some that are local to each of the two
+ * memory controllers on the die.
+ */
+struct skx_dev {
+	struct list_head	list;
+	u8			bus[4];
+	int			seg;
+	struct pci_dev	*sad_all;
+	struct pci_dev	*util_all;
+	u32	mcroute;
+	struct skx_imc {
+		struct mem_ctl_info *mci;
+		u8	mc;	/* system wide mc# */
+		u8	lmc;	/* socket relative mc# */
+		u8	src_id, node_id;
+		struct skx_channel {
+			struct pci_dev *cdev;
+			struct skx_dimm {
+				u8	close_pg;
+				u8	bank_xor_enable;
+				u8	fine_grain_bank;
+				u8	rowbits;
+				u8	colbits;
+			} dimms[NUM_DIMMS];
+		} chan[NUM_CHANNELS];
+	} imc[NUM_IMC];
+};
+static int skx_num_sockets;
+
+struct skx_pvt {
+	struct skx_imc	*imc;
+};
+
+struct decoded_addr {
+	struct skx_dev *dev;
+	u64	addr;
+	int	socket;
+	int	imc;
+	int	channel;
+	u64	chan_addr;
+	int	sktways;
+	int	chanways;
+	int	dimm;
+	int	rank;
+	int	channel_rank;
+	u64	rank_address;
+	int	row;
+	int	column;
+	int	bank_address;
+	int	bank_group;
+};
+
+static struct skx_dev *get_skx_dev(struct pci_bus *bus, u8 idx)
+{
+	struct skx_dev *d;
+
+	list_for_each_entry(d, &skx_edac_list, list) {
+		if (d->seg == pci_domain_nr(bus) && d->bus[idx] == bus->number)
+			return d;
+	}
+
+	return NULL;
+}
+
+enum munittype {
+	CHAN0, CHAN1, CHAN2, SAD_ALL, UTIL_ALL, SAD
+};
+
+struct munit {
+	u16	did;
+	u16	devfn[NUM_IMC];
+	u8	busidx;
+	u8	per_socket;
+	enum munittype mtype;
+};
+
+/*
+ * List of PCI device ids that we need together with some device
+ * number and function numbers to tell which memory controller the
+ * device belongs to.
+ */
+static const struct munit skx_all_munits[] = {
+	{ 0x2054, { }, 1, 1, SAD_ALL },
+	{ 0x2055, { }, 1, 1, UTIL_ALL },
+	{ 0x2040, { PCI_DEVFN(10, 0), PCI_DEVFN(12, 0) }, 2, 2, CHAN0 },
+	{ 0x2044, { PCI_DEVFN(10, 4), PCI_DEVFN(12, 4) }, 2, 2, CHAN1 },
+	{ 0x2048, { PCI_DEVFN(11, 0), PCI_DEVFN(13, 0) }, 2, 2, CHAN2 },
+	{ 0x208e, { }, 1, 0, SAD },
+	{ }
+};
+
+/*
+ * We use the per-socket device 0x2016 to count how many sockets are present,
+ * and to detemine which PCI buses are associated with each socket. Allocate
+ * and build the full list of all the skx_dev structures that we need here.
+ */
+static int get_all_bus_mappings(void)
+{
+	struct pci_dev *pdev, *prev;
+	struct skx_dev *d;
+	u32 reg;
+	int ndev = 0;
+
+	prev = NULL;
+	for (;;) {
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x2016, prev);
+		if (!pdev)
+			break;
+		ndev++;
+		d = kzalloc(sizeof(*d), GFP_KERNEL);
+		if (!d) {
+			pci_dev_put(pdev);
+			return -ENOMEM;
+		}
+		d->seg = pci_domain_nr(pdev->bus);
+		pci_read_config_dword(pdev, 0xCC, &reg);
+		d->bus[0] =  GET_BITFIELD(reg, 0, 7);
+		d->bus[1] =  GET_BITFIELD(reg, 8, 15);
+		d->bus[2] =  GET_BITFIELD(reg, 16, 23);
+		d->bus[3] =  GET_BITFIELD(reg, 24, 31);
+		edac_dbg(2, "busses: %x, %x, %x, %x\n",
+			 d->bus[0], d->bus[1], d->bus[2], d->bus[3]);
+		list_add_tail(&d->list, &skx_edac_list);
+		skx_num_sockets++;
+		prev = pdev;
+	}
+
+	return ndev;
+}
+
+static int get_all_munits(const struct munit *m)
+{
+	struct pci_dev *pdev, *prev;
+	struct skx_dev *d;
+	u32 reg;
+	int i = 0, ndev = 0;
+
+	prev = NULL;
+	for (;;) {
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL, m->did, prev);
+		if (!pdev)
+			break;
+		ndev++;
+		if (m->per_socket == NUM_IMC) {
+			for (i = 0; i < NUM_IMC; i++)
+				if (m->devfn[i] == pdev->devfn)
+					break;
+			if (i == NUM_IMC)
+				goto fail;
+		}
+		d = get_skx_dev(pdev->bus, m->busidx);
+		if (!d)
+			goto fail;
+
+		/* Be sure that the device is enabled */
+		if (unlikely(pci_enable_device(pdev) < 0)) {
+			skx_printk(KERN_ERR,
+				"Couldn't enable %04x:%04x\n", PCI_VENDOR_ID_INTEL, m->did);
+			goto fail;
+		}
+
+		switch (m->mtype) {
+		case CHAN0: case CHAN1: case CHAN2:
+			pci_dev_get(pdev);
+			d->imc[i].chan[m->mtype].cdev = pdev;
+			break;
+		case SAD_ALL:
+			pci_dev_get(pdev);
+			d->sad_all = pdev;
+			break;
+		case UTIL_ALL:
+			pci_dev_get(pdev);
+			d->util_all = pdev;
+			break;
+		case SAD:
+			/*
+			 * one of these devices per core, including cores
+			 * that don't exist on this SKU. Ignore any that
+			 * read a route table of zero, make sure all the
+			 * non-zero values match.
+			 */
+			pci_read_config_dword(pdev, 0xB4, &reg);
+			if (reg != 0) {
+				if (d->mcroute == 0)
+					d->mcroute = reg;
+				else if (d->mcroute != reg) {
+					skx_printk(KERN_ERR,
+						"mcroute mismatch\n");
+					goto fail;
+				}
+			}
+			ndev--;
+			break;
+		}
+
+		prev = pdev;
+	}
+
+	return ndev;
+fail:
+	pci_dev_put(pdev);
+	return -ENODEV;
+}
+
+static const struct x86_cpu_id skx_cpuids[] = {
+	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_SKYLAKE_X, 0, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(x86cpu, skx_cpuids);
+
+static u8 get_src_id(struct skx_dev *d)
+{
+	u32 reg;
+
+	pci_read_config_dword(d->util_all, 0xF0, &reg);
+
+	return GET_BITFIELD(reg, 12, 14);
+}
+
+static u8 skx_get_node_id(struct skx_dev *d)
+{
+	u32 reg;
+
+	pci_read_config_dword(d->util_all, 0xF4, &reg);
+
+	return GET_BITFIELD(reg, 0, 2);
+}
+
+static int get_dimm_attr(u32 reg, int lobit, int hibit, int add, int minval,
+			 int maxval, char *name)
+{
+	u32 val = GET_BITFIELD(reg, lobit, hibit);
+
+	if (val < minval || val > maxval) {
+		edac_dbg(2, "bad %s = %d (raw=%x)\n", name, val, reg);
+		return -EINVAL;
+	}
+	return val + add;
+}
+
+#define IS_DIMM_PRESENT(mtr)		GET_BITFIELD((mtr), 15, 15)
+#define IS_NVDIMM_PRESENT(mcddrtcfg, i)	GET_BITFIELD((mcddrtcfg), (i), (i))
+
+#define numrank(reg) get_dimm_attr((reg), 12, 13, 0, 0, 2, "ranks")
+#define numrow(reg) get_dimm_attr((reg), 2, 4, 12, 1, 6, "rows")
+#define numcol(reg) get_dimm_attr((reg), 0, 1, 10, 0, 2, "cols")
+
+static int get_width(u32 mtr)
+{
+	switch (GET_BITFIELD(mtr, 8, 9)) {
+	case 0:
+		return DEV_X4;
+	case 1:
+		return DEV_X8;
+	case 2:
+		return DEV_X16;
+	}
+	return DEV_UNKNOWN;
+}
+
+static int skx_get_hi_lo(void)
+{
+	struct pci_dev *pdev;
+	u32 reg;
+
+	pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x2034, NULL);
+	if (!pdev) {
+		edac_dbg(0, "Can't get tolm/tohm\n");
+		return -ENODEV;
+	}
+
+	pci_read_config_dword(pdev, 0xD0, &reg);
+	skx_tolm = reg;
+	pci_read_config_dword(pdev, 0xD4, &reg);
+	skx_tohm = reg;
+	pci_read_config_dword(pdev, 0xD8, &reg);
+	skx_tohm |= (u64)reg << 32;
+
+	pci_dev_put(pdev);
+	edac_dbg(2, "tolm=%llx tohm=%llx\n", skx_tolm, skx_tohm);
+
+	return 0;
+}
+
+static int get_dimm_info(u32 mtr, u32 amap, struct dimm_info *dimm,
+			 struct skx_imc *imc, int chan, int dimmno)
+{
+	int  banks = 16, ranks, rows, cols, npages;
+	u64 size;
+
+	ranks = numrank(mtr);
+	rows = numrow(mtr);
+	cols = numcol(mtr);
+
+	/*
+	 * Compute size in 8-byte (2^3) words, then shift to MiB (2^20)
+	 */
+	size = ((1ull << (rows + cols + ranks)) * banks) >> (20 - 3);
+	npages = MiB_TO_PAGES(size);
+
+	edac_dbg(0, "mc#%d: channel %d, dimm %d, %lld MiB (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n",
+		 imc->mc, chan, dimmno, size, npages,
+		 banks, 1 << ranks, rows, cols);
+
+	imc->chan[chan].dimms[dimmno].close_pg = GET_BITFIELD(mtr, 0, 0);
+	imc->chan[chan].dimms[dimmno].bank_xor_enable = GET_BITFIELD(mtr, 9, 9);
+	imc->chan[chan].dimms[dimmno].fine_grain_bank = GET_BITFIELD(amap, 0, 0);
+	imc->chan[chan].dimms[dimmno].rowbits = rows;
+	imc->chan[chan].dimms[dimmno].colbits = cols;
+
+	dimm->nr_pages = npages;
+	dimm->grain = 32;
+	dimm->dtype = get_width(mtr);
+	dimm->mtype = MEM_DDR4;
+	dimm->edac_mode = EDAC_SECDED; /* likely better than this */
+	snprintf(dimm->label, sizeof(dimm->label), "CPU_SrcID#%u_MC#%u_Chan#%u_DIMM#%u",
+		 imc->src_id, imc->lmc, chan, dimmno);
+
+	return 1;
+}
+
+static int get_nvdimm_info(struct dimm_info *dimm, struct skx_imc *imc,
+			   int chan, int dimmno)
+{
+	int smbios_handle;
+	u32 dev_handle;
+	u16 flags;
+	u64 size = 0;
+
+	dev_handle = ACPI_NFIT_BUILD_DEVICE_HANDLE(dimmno, chan, imc->lmc,
+						   imc->src_id, 0);
+
+	smbios_handle = nfit_get_smbios_id(dev_handle, &flags);
+	if (smbios_handle == -EOPNOTSUPP) {
+		pr_warn_once(EDAC_MOD_STR ": Can't find size of NVDIMM. Try enabling CONFIG_ACPI_NFIT\n");
+		goto unknown_size;
+	}
+
+	if (smbios_handle < 0) {
+		skx_printk(KERN_ERR, "Can't find handle for NVDIMM ADR=%x\n", dev_handle);
+		goto unknown_size;
+	}
+
+	if (flags & ACPI_NFIT_MEM_MAP_FAILED) {
+		skx_printk(KERN_ERR, "NVDIMM ADR=%x is not mapped\n", dev_handle);
+		goto unknown_size;
+	}
+
+	size = dmi_memdev_size(smbios_handle);
+	if (size == ~0ull)
+		skx_printk(KERN_ERR, "Can't find size for NVDIMM ADR=%x/SMBIOS=%x\n",
+			   dev_handle, smbios_handle);
+
+unknown_size:
+	dimm->nr_pages = size >> PAGE_SHIFT;
+	dimm->grain = 32;
+	dimm->dtype = DEV_UNKNOWN;
+	dimm->mtype = MEM_NVDIMM;
+	dimm->edac_mode = EDAC_SECDED; /* likely better than this */
+
+	edac_dbg(0, "mc#%d: channel %d, dimm %d, %llu MiB (%u pages)\n",
+		 imc->mc, chan, dimmno, size >> 20, dimm->nr_pages);
+
+	snprintf(dimm->label, sizeof(dimm->label), "CPU_SrcID#%u_MC#%u_Chan#%u_DIMM#%u",
+		 imc->src_id, imc->lmc, chan, dimmno);
+
+	return (size == 0 || size == ~0ull) ? 0 : 1;
+}
+
+#define SKX_GET_MTMTR(dev, reg) \
+	pci_read_config_dword((dev), 0x87c, &reg)
+
+static bool skx_check_ecc(struct pci_dev *pdev)
+{
+	u32 mtmtr;
+
+	SKX_GET_MTMTR(pdev, mtmtr);
+
+	return !!GET_BITFIELD(mtmtr, 2, 2);
+}
+
+static int skx_get_dimm_config(struct mem_ctl_info *mci)
+{
+	struct skx_pvt *pvt = mci->pvt_info;
+	struct skx_imc *imc = pvt->imc;
+	u32 mtr, amap, mcddrtcfg;
+	struct dimm_info *dimm;
+	int i, j;
+	int ndimms;
+
+	for (i = 0; i < NUM_CHANNELS; i++) {
+		ndimms = 0;
+		pci_read_config_dword(imc->chan[i].cdev, 0x8C, &amap);
+		pci_read_config_dword(imc->chan[i].cdev, 0x400, &mcddrtcfg);
+		for (j = 0; j < NUM_DIMMS; j++) {
+			dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
+					     mci->n_layers, i, j, 0);
+			pci_read_config_dword(imc->chan[i].cdev,
+					0x80 + 4*j, &mtr);
+			if (IS_DIMM_PRESENT(mtr))
+				ndimms += get_dimm_info(mtr, amap, dimm, imc, i, j);
+			else if (IS_NVDIMM_PRESENT(mcddrtcfg, j))
+				ndimms += get_nvdimm_info(dimm, imc, i, j);
+		}
+		if (ndimms && !skx_check_ecc(imc->chan[0].cdev)) {
+			skx_printk(KERN_ERR, "ECC is disabled on imc %d\n", imc->mc);
+			return -ENODEV;
+		}
+	}
+
+	return 0;
+}
+
+static void skx_unregister_mci(struct skx_imc *imc)
+{
+	struct mem_ctl_info *mci = imc->mci;
+
+	if (!mci)
+		return;
+
+	edac_dbg(0, "MC%d: mci = %p\n", imc->mc, mci);
+
+	/* Remove MC sysfs nodes */
+	edac_mc_del_mc(mci->pdev);
+
+	edac_dbg(1, "%s: free mci struct\n", mci->ctl_name);
+	kfree(mci->ctl_name);
+	edac_mc_free(mci);
+}
+
+static int skx_register_mci(struct skx_imc *imc)
+{
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[2];
+	struct pci_dev *pdev = imc->chan[0].cdev;
+	struct skx_pvt *pvt;
+	int rc;
+
+	/* allocate a new MC control structure */
+	layers[0].type = EDAC_MC_LAYER_CHANNEL;
+	layers[0].size = NUM_CHANNELS;
+	layers[0].is_virt_csrow = false;
+	layers[1].type = EDAC_MC_LAYER_SLOT;
+	layers[1].size = NUM_DIMMS;
+	layers[1].is_virt_csrow = true;
+	mci = edac_mc_alloc(imc->mc, ARRAY_SIZE(layers), layers,
+			    sizeof(struct skx_pvt));
+
+	if (unlikely(!mci))
+		return -ENOMEM;
+
+	edac_dbg(0, "MC#%d: mci = %p\n", imc->mc, mci);
+
+	/* Associate skx_dev and mci for future usage */
+	imc->mci = mci;
+	pvt = mci->pvt_info;
+	pvt->imc = imc;
+
+	mci->ctl_name = kasprintf(GFP_KERNEL, "Skylake Socket#%d IMC#%d",
+				  imc->node_id, imc->lmc);
+	if (!mci->ctl_name) {
+		rc = -ENOMEM;
+		goto fail0;
+	}
+
+	mci->mtype_cap = MEM_FLAG_DDR4 | MEM_FLAG_NVDIMM;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE;
+	mci->edac_cap = EDAC_FLAG_NONE;
+	mci->mod_name = EDAC_MOD_STR;
+	mci->dev_name = pci_name(imc->chan[0].cdev);
+	mci->ctl_page_to_phys = NULL;
+
+	rc = skx_get_dimm_config(mci);
+	if (rc < 0)
+		goto fail;
+
+	/* record ptr to the generic device */
+	mci->pdev = &pdev->dev;
+
+	/* add this new MC control structure to EDAC's list of MCs */
+	if (unlikely(edac_mc_add_mc(mci))) {
+		edac_dbg(0, "MC: failed edac_mc_add_mc()\n");
+		rc = -EINVAL;
+		goto fail;
+	}
+
+	return 0;
+
+fail:
+	kfree(mci->ctl_name);
+fail0:
+	edac_mc_free(mci);
+	imc->mci = NULL;
+	return rc;
+}
+
+#define	SKX_MAX_SAD 24
+
+#define SKX_GET_SAD(d, i, reg)	\
+	pci_read_config_dword((d)->sad_all, 0x60 + 8 * (i), &reg)
+#define SKX_GET_ILV(d, i, reg)	\
+	pci_read_config_dword((d)->sad_all, 0x64 + 8 * (i), &reg)
+
+#define	SKX_SAD_MOD3MODE(sad)	GET_BITFIELD((sad), 30, 31)
+#define	SKX_SAD_MOD3(sad)	GET_BITFIELD((sad), 27, 27)
+#define SKX_SAD_LIMIT(sad)	(((u64)GET_BITFIELD((sad), 7, 26) << 26) | MASK26)
+#define	SKX_SAD_MOD3ASMOD2(sad)	GET_BITFIELD((sad), 5, 6)
+#define	SKX_SAD_ATTR(sad)	GET_BITFIELD((sad), 3, 4)
+#define	SKX_SAD_INTERLEAVE(sad)	GET_BITFIELD((sad), 1, 2)
+#define SKX_SAD_ENABLE(sad)	GET_BITFIELD((sad), 0, 0)
+
+#define SKX_ILV_REMOTE(tgt)	(((tgt) & 8) == 0)
+#define SKX_ILV_TARGET(tgt)	((tgt) & 7)
+
+static bool skx_sad_decode(struct decoded_addr *res)
+{
+	struct skx_dev *d = list_first_entry(&skx_edac_list, typeof(*d), list);
+	u64 addr = res->addr;
+	int i, idx, tgt, lchan, shift;
+	u32 sad, ilv;
+	u64 limit, prev_limit;
+	int remote = 0;
+
+	/* Simple sanity check for I/O space or out of range */
+	if (addr >= skx_tohm || (addr >= skx_tolm && addr < BIT_ULL(32))) {
+		edac_dbg(0, "Address %llx out of range\n", addr);
+		return false;
+	}
+
+restart:
+	prev_limit = 0;
+	for (i = 0; i < SKX_MAX_SAD; i++) {
+		SKX_GET_SAD(d, i, sad);
+		limit = SKX_SAD_LIMIT(sad);
+		if (SKX_SAD_ENABLE(sad)) {
+			if (addr >= prev_limit && addr <= limit)
+				goto sad_found;
+		}
+		prev_limit = limit + 1;
+	}
+	edac_dbg(0, "No SAD entry for %llx\n", addr);
+	return false;
+
+sad_found:
+	SKX_GET_ILV(d, i, ilv);
+
+	switch (SKX_SAD_INTERLEAVE(sad)) {
+	case 0:
+		idx = GET_BITFIELD(addr, 6, 8);
+		break;
+	case 1:
+		idx = GET_BITFIELD(addr, 8, 10);
+		break;
+	case 2:
+		idx = GET_BITFIELD(addr, 12, 14);
+		break;
+	case 3:
+		idx = GET_BITFIELD(addr, 30, 32);
+		break;
+	}
+
+	tgt = GET_BITFIELD(ilv, 4 * idx, 4 * idx + 3);
+
+	/* If point to another node, find it and start over */
+	if (SKX_ILV_REMOTE(tgt)) {
+		if (remote) {
+			edac_dbg(0, "Double remote!\n");
+			return false;
+		}
+		remote = 1;
+		list_for_each_entry(d, &skx_edac_list, list) {
+			if (d->imc[0].src_id == SKX_ILV_TARGET(tgt))
+				goto restart;
+		}
+		edac_dbg(0, "Can't find node %d\n", SKX_ILV_TARGET(tgt));
+		return false;
+	}
+
+	if (SKX_SAD_MOD3(sad) == 0)
+		lchan = SKX_ILV_TARGET(tgt);
+	else {
+		switch (SKX_SAD_MOD3MODE(sad)) {
+		case 0:
+			shift = 6;
+			break;
+		case 1:
+			shift = 8;
+			break;
+		case 2:
+			shift = 12;
+			break;
+		default:
+			edac_dbg(0, "illegal mod3mode\n");
+			return false;
+		}
+		switch (SKX_SAD_MOD3ASMOD2(sad)) {
+		case 0:
+			lchan = (addr >> shift) % 3;
+			break;
+		case 1:
+			lchan = (addr >> shift) % 2;
+			break;
+		case 2:
+			lchan = (addr >> shift) % 2;
+			lchan = (lchan << 1) | !lchan;
+			break;
+		case 3:
+			lchan = ((addr >> shift) % 2) << 1;
+			break;
+		}
+		lchan = (lchan << 1) | (SKX_ILV_TARGET(tgt) & 1);
+	}
+
+	res->dev = d;
+	res->socket = d->imc[0].src_id;
+	res->imc = GET_BITFIELD(d->mcroute, lchan * 3, lchan * 3 + 2);
+	res->channel = GET_BITFIELD(d->mcroute, lchan * 2 + 18, lchan * 2 + 19);
+
+	edac_dbg(2, "%llx: socket=%d imc=%d channel=%d\n",
+		 res->addr, res->socket, res->imc, res->channel);
+	return true;
+}
+
+#define	SKX_MAX_TAD 8
+
+#define SKX_GET_TADBASE(d, mc, i, reg)			\
+	pci_read_config_dword((d)->imc[mc].chan[0].cdev, 0x850 + 4 * (i), &reg)
+#define SKX_GET_TADWAYNESS(d, mc, i, reg)		\
+	pci_read_config_dword((d)->imc[mc].chan[0].cdev, 0x880 + 4 * (i), &reg)
+#define SKX_GET_TADCHNILVOFFSET(d, mc, ch, i, reg)	\
+	pci_read_config_dword((d)->imc[mc].chan[ch].cdev, 0x90 + 4 * (i), &reg)
+
+#define	SKX_TAD_BASE(b)		((u64)GET_BITFIELD((b), 12, 31) << 26)
+#define SKX_TAD_SKT_GRAN(b)	GET_BITFIELD((b), 4, 5)
+#define SKX_TAD_CHN_GRAN(b)	GET_BITFIELD((b), 6, 7)
+#define	SKX_TAD_LIMIT(b)	(((u64)GET_BITFIELD((b), 12, 31) << 26) | MASK26)
+#define	SKX_TAD_OFFSET(b)	((u64)GET_BITFIELD((b), 4, 23) << 26)
+#define	SKX_TAD_SKTWAYS(b)	(1 << GET_BITFIELD((b), 10, 11))
+#define	SKX_TAD_CHNWAYS(b)	(GET_BITFIELD((b), 8, 9) + 1)
+
+/* which bit used for both socket and channel interleave */
+static int skx_granularity[] = { 6, 8, 12, 30 };
+
+static u64 skx_do_interleave(u64 addr, int shift, int ways, u64 lowbits)
+{
+	addr >>= shift;
+	addr /= ways;
+	addr <<= shift;
+
+	return addr | (lowbits & ((1ull << shift) - 1));
+}
+
+static bool skx_tad_decode(struct decoded_addr *res)
+{
+	int i;
+	u32 base, wayness, chnilvoffset;
+	int skt_interleave_bit, chn_interleave_bit;
+	u64 channel_addr;
+
+	for (i = 0; i < SKX_MAX_TAD; i++) {
+		SKX_GET_TADBASE(res->dev, res->imc, i, base);
+		SKX_GET_TADWAYNESS(res->dev, res->imc, i, wayness);
+		if (SKX_TAD_BASE(base) <= res->addr && res->addr <= SKX_TAD_LIMIT(wayness))
+			goto tad_found;
+	}
+	edac_dbg(0, "No TAD entry for %llx\n", res->addr);
+	return false;
+
+tad_found:
+	res->sktways = SKX_TAD_SKTWAYS(wayness);
+	res->chanways = SKX_TAD_CHNWAYS(wayness);
+	skt_interleave_bit = skx_granularity[SKX_TAD_SKT_GRAN(base)];
+	chn_interleave_bit = skx_granularity[SKX_TAD_CHN_GRAN(base)];
+
+	SKX_GET_TADCHNILVOFFSET(res->dev, res->imc, res->channel, i, chnilvoffset);
+	channel_addr = res->addr - SKX_TAD_OFFSET(chnilvoffset);
+
+	if (res->chanways == 3 && skt_interleave_bit > chn_interleave_bit) {
+		/* Must handle channel first, then socket */
+		channel_addr = skx_do_interleave(channel_addr, chn_interleave_bit,
+						 res->chanways, channel_addr);
+		channel_addr = skx_do_interleave(channel_addr, skt_interleave_bit,
+						 res->sktways, channel_addr);
+	} else {
+		/* Handle socket then channel. Preserve low bits from original address */
+		channel_addr = skx_do_interleave(channel_addr, skt_interleave_bit,
+						 res->sktways, res->addr);
+		channel_addr = skx_do_interleave(channel_addr, chn_interleave_bit,
+						 res->chanways, res->addr);
+	}
+
+	res->chan_addr = channel_addr;
+
+	edac_dbg(2, "%llx: chan_addr=%llx sktways=%d chanways=%d\n",
+		 res->addr, res->chan_addr, res->sktways, res->chanways);
+	return true;
+}
+
+#define SKX_MAX_RIR 4
+
+#define SKX_GET_RIRWAYNESS(d, mc, ch, i, reg)		\
+	pci_read_config_dword((d)->imc[mc].chan[ch].cdev,	\
+			      0x108 + 4 * (i), &reg)
+#define SKX_GET_RIRILV(d, mc, ch, idx, i, reg)		\
+	pci_read_config_dword((d)->imc[mc].chan[ch].cdev,	\
+			      0x120 + 16 * idx + 4 * (i), &reg)
+
+#define	SKX_RIR_VALID(b) GET_BITFIELD((b), 31, 31)
+#define	SKX_RIR_LIMIT(b) (((u64)GET_BITFIELD((b), 1, 11) << 29) | MASK29)
+#define	SKX_RIR_WAYS(b) (1 << GET_BITFIELD((b), 28, 29))
+#define	SKX_RIR_CHAN_RANK(b) GET_BITFIELD((b), 16, 19)
+#define	SKX_RIR_OFFSET(b) ((u64)(GET_BITFIELD((b), 2, 15) << 26))
+
+static bool skx_rir_decode(struct decoded_addr *res)
+{
+	int i, idx, chan_rank;
+	int shift;
+	u32 rirway, rirlv;
+	u64 rank_addr, prev_limit = 0, limit;
+
+	if (res->dev->imc[res->imc].chan[res->channel].dimms[0].close_pg)
+		shift = 6;
+	else
+		shift = 13;
+
+	for (i = 0; i < SKX_MAX_RIR; i++) {
+		SKX_GET_RIRWAYNESS(res->dev, res->imc, res->channel, i, rirway);
+		limit = SKX_RIR_LIMIT(rirway);
+		if (SKX_RIR_VALID(rirway)) {
+			if (prev_limit <= res->chan_addr &&
+			    res->chan_addr <= limit)
+				goto rir_found;
+		}
+		prev_limit = limit;
+	}
+	edac_dbg(0, "No RIR entry for %llx\n", res->addr);
+	return false;
+
+rir_found:
+	rank_addr = res->chan_addr >> shift;
+	rank_addr /= SKX_RIR_WAYS(rirway);
+	rank_addr <<= shift;
+	rank_addr |= res->chan_addr & GENMASK_ULL(shift - 1, 0);
+
+	res->rank_address = rank_addr;
+	idx = (res->chan_addr >> shift) % SKX_RIR_WAYS(rirway);
+
+	SKX_GET_RIRILV(res->dev, res->imc, res->channel, idx, i, rirlv);
+	res->rank_address = rank_addr - SKX_RIR_OFFSET(rirlv);
+	chan_rank = SKX_RIR_CHAN_RANK(rirlv);
+	res->channel_rank = chan_rank;
+	res->dimm = chan_rank / 4;
+	res->rank = chan_rank % 4;
+
+	edac_dbg(2, "%llx: dimm=%d rank=%d chan_rank=%d rank_addr=%llx\n",
+		 res->addr, res->dimm, res->rank,
+		 res->channel_rank, res->rank_address);
+	return true;
+}
+
+static u8 skx_close_row[] = {
+	15, 16, 17, 18, 20, 21, 22, 28, 10, 11, 12, 13, 29, 30, 31, 32, 33
+};
+static u8 skx_close_column[] = {
+	3, 4, 5, 14, 19, 23, 24, 25, 26, 27
+};
+static u8 skx_open_row[] = {
+	14, 15, 16, 20, 28, 21, 22, 23, 24, 25, 26, 27, 29, 30, 31, 32, 33
+};
+static u8 skx_open_column[] = {
+	3, 4, 5, 6, 7, 8, 9, 10, 11, 12
+};
+static u8 skx_open_fine_column[] = {
+	3, 4, 5, 7, 8, 9, 10, 11, 12, 13
+};
+
+static int skx_bits(u64 addr, int nbits, u8 *bits)
+{
+	int i, res = 0;
+
+	for (i = 0; i < nbits; i++)
+		res |= ((addr >> bits[i]) & 1) << i;
+	return res;
+}
+
+static int skx_bank_bits(u64 addr, int b0, int b1, int do_xor, int x0, int x1)
+{
+	int ret = GET_BITFIELD(addr, b0, b0) | (GET_BITFIELD(addr, b1, b1) << 1);
+
+	if (do_xor)
+		ret ^= GET_BITFIELD(addr, x0, x0) | (GET_BITFIELD(addr, x1, x1) << 1);
+
+	return ret;
+}
+
+static bool skx_mad_decode(struct decoded_addr *r)
+{
+	struct skx_dimm *dimm = &r->dev->imc[r->imc].chan[r->channel].dimms[r->dimm];
+	int bg0 = dimm->fine_grain_bank ? 6 : 13;
+
+	if (dimm->close_pg) {
+		r->row = skx_bits(r->rank_address, dimm->rowbits, skx_close_row);
+		r->column = skx_bits(r->rank_address, dimm->colbits, skx_close_column);
+		r->column |= 0x400; /* C10 is autoprecharge, always set */
+		r->bank_address = skx_bank_bits(r->rank_address, 8, 9, dimm->bank_xor_enable, 22, 28);
+		r->bank_group = skx_bank_bits(r->rank_address, 6, 7, dimm->bank_xor_enable, 20, 21);
+	} else {
+		r->row = skx_bits(r->rank_address, dimm->rowbits, skx_open_row);
+		if (dimm->fine_grain_bank)
+			r->column = skx_bits(r->rank_address, dimm->colbits, skx_open_fine_column);
+		else
+			r->column = skx_bits(r->rank_address, dimm->colbits, skx_open_column);
+		r->bank_address = skx_bank_bits(r->rank_address, 18, 19, dimm->bank_xor_enable, 22, 23);
+		r->bank_group = skx_bank_bits(r->rank_address, bg0, 17, dimm->bank_xor_enable, 20, 21);
+	}
+	r->row &= (1u << dimm->rowbits) - 1;
+
+	edac_dbg(2, "%llx: row=%x col=%x bank_addr=%d bank_group=%d\n",
+		 r->addr, r->row, r->column, r->bank_address,
+		 r->bank_group);
+	return true;
+}
+
+static bool skx_decode(struct decoded_addr *res)
+{
+
+	return skx_sad_decode(res) && skx_tad_decode(res) &&
+		skx_rir_decode(res) && skx_mad_decode(res);
+}
+
+#ifdef CONFIG_EDAC_DEBUG
+/*
+ * Debug feature. Make /sys/kernel/debug/skx_edac_test/addr.
+ * Write an address to this file to exercise the address decode
+ * logic in this driver.
+ */
+static struct dentry *skx_test;
+static u64 skx_fake_addr;
+
+static int debugfs_u64_set(void *data, u64 val)
+{
+	struct decoded_addr res;
+
+	res.addr = val;
+	skx_decode(&res);
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
+
+static struct dentry *mydebugfs_create(const char *name, umode_t mode,
+				       struct dentry *parent, u64 *value)
+{
+	return debugfs_create_file(name, mode, parent, value, &fops_u64_wo);
+}
+
+static void setup_skx_debug(void)
+{
+	skx_test = debugfs_create_dir("skx_edac_test", NULL);
+	mydebugfs_create("addr", S_IWUSR, skx_test, &skx_fake_addr);
+}
+
+static void teardown_skx_debug(void)
+{
+	debugfs_remove_recursive(skx_test);
+}
+#else
+static void setup_skx_debug(void)
+{
+}
+
+static void teardown_skx_debug(void)
+{
+}
+#endif /*CONFIG_EDAC_DEBUG*/
+
+static void skx_mce_output_error(struct mem_ctl_info *mci,
+				 const struct mce *m,
+				 struct decoded_addr *res)
+{
+	enum hw_event_mc_err_type tp_event;
+	char *type, *optype, msg[256];
+	bool ripv = GET_BITFIELD(m->mcgstatus, 0, 0);
+	bool overflow = GET_BITFIELD(m->status, 62, 62);
+	bool uncorrected_error = GET_BITFIELD(m->status, 61, 61);
+	bool recoverable;
+	u32 core_err_cnt = GET_BITFIELD(m->status, 38, 52);
+	u32 mscod = GET_BITFIELD(m->status, 16, 31);
+	u32 errcode = GET_BITFIELD(m->status, 0, 15);
+	u32 optypenum = GET_BITFIELD(m->status, 4, 6);
+
+	recoverable = GET_BITFIELD(m->status, 56, 56);
+
+	if (uncorrected_error) {
+		core_err_cnt = 1;
+		if (ripv) {
+			type = "FATAL";
+			tp_event = HW_EVENT_ERR_FATAL;
+		} else {
+			type = "NON_FATAL";
+			tp_event = HW_EVENT_ERR_UNCORRECTED;
+		}
+	} else {
+		type = "CORRECTED";
+		tp_event = HW_EVENT_ERR_CORRECTED;
+	}
+
+	/*
+	 * According with Table 15-9 of the Intel Architecture spec vol 3A,
+	 * memory errors should fit in this mask:
+	 *	000f 0000 1mmm cccc (binary)
+	 * where:
+	 *	f = Correction Report Filtering Bit. If 1, subsequent errors
+	 *	    won't be shown
+	 *	mmm = error type
+	 *	cccc = channel
+	 * If the mask doesn't match, report an error to the parsing logic
+	 */
+	if (!((errcode & 0xef80) == 0x80)) {
+		optype = "Can't parse: it is not a mem";
+	} else {
+		switch (optypenum) {
+		case 0:
+			optype = "generic undef request error";
+			break;
+		case 1:
+			optype = "memory read error";
+			break;
+		case 2:
+			optype = "memory write error";
+			break;
+		case 3:
+			optype = "addr/cmd error";
+			break;
+		case 4:
+			optype = "memory scrubbing error";
+			break;
+		default:
+			optype = "reserved";
+			break;
+		}
+	}
+
+	snprintf(msg, sizeof(msg),
+		 "%s%s err_code:%04x:%04x socket:%d imc:%d rank:%d bg:%d ba:%d row:%x col:%x",
+		 overflow ? " OVERFLOW" : "",
+		 (uncorrected_error && recoverable) ? " recoverable" : "",
+		 mscod, errcode,
+		 res->socket, res->imc, res->rank,
+		 res->bank_group, res->bank_address, res->row, res->column);
+
+	edac_dbg(0, "%s\n", msg);
+
+	/* Call the helper to output message */
+	edac_mc_handle_error(tp_event, mci, core_err_cnt,
+			     m->addr >> PAGE_SHIFT, m->addr & ~PAGE_MASK, 0,
+			     res->channel, res->dimm, -1,
+			     optype, msg);
+}
+
+static int skx_mce_check_error(struct notifier_block *nb, unsigned long val,
+			       void *data)
+{
+	struct mce *mce = (struct mce *)data;
+	struct decoded_addr res;
+	struct mem_ctl_info *mci;
+	char *type;
+
+	if (edac_get_report_status() == EDAC_REPORTING_DISABLED)
+		return NOTIFY_DONE;
+
+	/* ignore unless this is memory related with an address */
+	if ((mce->status & 0xefff) >> 7 != 1 || !(mce->status & MCI_STATUS_ADDRV))
+		return NOTIFY_DONE;
+
+	res.addr = mce->addr;
+	if (!skx_decode(&res))
+		return NOTIFY_DONE;
+	mci = res.dev->imc[res.imc].mci;
+
+	if (mce->mcgstatus & MCG_STATUS_MCIP)
+		type = "Exception";
+	else
+		type = "Event";
+
+	skx_mc_printk(mci, KERN_DEBUG, "HANDLING MCE MEMORY ERROR\n");
+
+	skx_mc_printk(mci, KERN_DEBUG, "CPU %d: Machine Check %s: %Lx "
+			  "Bank %d: %016Lx\n", mce->extcpu, type,
+			  mce->mcgstatus, mce->bank, mce->status);
+	skx_mc_printk(mci, KERN_DEBUG, "TSC %llx ", mce->tsc);
+	skx_mc_printk(mci, KERN_DEBUG, "ADDR %llx ", mce->addr);
+	skx_mc_printk(mci, KERN_DEBUG, "MISC %llx ", mce->misc);
+
+	skx_mc_printk(mci, KERN_DEBUG, "PROCESSOR %u:%x TIME %llu SOCKET "
+			  "%u APIC %x\n", mce->cpuvendor, mce->cpuid,
+			  mce->time, mce->socketid, mce->apicid);
+
+	skx_mce_output_error(mci, mce, &res);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block skx_mce_dec = {
+	.notifier_call	= skx_mce_check_error,
+	.priority	= MCE_PRIO_EDAC,
+};
+
+static void skx_remove(void)
+{
+	int i, j;
+	struct skx_dev *d, *tmp;
+
+	edac_dbg(0, "\n");
+
+	list_for_each_entry_safe(d, tmp, &skx_edac_list, list) {
+		list_del(&d->list);
+		for (i = 0; i < NUM_IMC; i++) {
+			skx_unregister_mci(&d->imc[i]);
+			for (j = 0; j < NUM_CHANNELS; j++)
+				pci_dev_put(d->imc[i].chan[j].cdev);
+		}
+		pci_dev_put(d->util_all);
+		pci_dev_put(d->sad_all);
+
+		kfree(d);
+	}
+}
+
+/*
+ * skx_init:
+ *	make sure we are running on the correct cpu model
+ *	search for all the devices we need
+ *	check which DIMMs are present.
+ */
+static int __init skx_init(void)
+{
+	const struct x86_cpu_id *id;
+	const struct munit *m;
+	const char *owner;
+	int rc = 0, i;
+	u8 mc = 0, src_id, node_id;
+	struct skx_dev *d;
+
+	edac_dbg(2, "\n");
+
+	owner = edac_get_owner();
+	if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR)))
+		return -EBUSY;
+
+	id = x86_match_cpu(skx_cpuids);
+	if (!id)
+		return -ENODEV;
+
+	rc = skx_get_hi_lo();
+	if (rc)
+		return rc;
+
+	rc = get_all_bus_mappings();
+	if (rc < 0)
+		goto fail;
+	if (rc == 0) {
+		edac_dbg(2, "No memory controllers found\n");
+		return -ENODEV;
+	}
+
+	for (m = skx_all_munits; m->did; m++) {
+		rc = get_all_munits(m);
+		if (rc < 0)
+			goto fail;
+		if (rc != m->per_socket * skx_num_sockets) {
+			edac_dbg(2, "Expected %d, got %d of %x\n",
+				 m->per_socket * skx_num_sockets, rc, m->did);
+			rc = -ENODEV;
+			goto fail;
+		}
+	}
+
+	list_for_each_entry(d, &skx_edac_list, list) {
+		src_id = get_src_id(d);
+		node_id = skx_get_node_id(d);
+		edac_dbg(2, "src_id=%d node_id=%d\n", src_id, node_id);
+		for (i = 0; i < NUM_IMC; i++) {
+			d->imc[i].mc = mc++;
+			d->imc[i].lmc = i;
+			d->imc[i].src_id = src_id;
+			d->imc[i].node_id = node_id;
+			rc = skx_register_mci(&d->imc[i]);
+			if (rc < 0)
+				goto fail;
+		}
+	}
+
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
+
+	setup_skx_debug();
+
+	mce_register_decode_chain(&skx_mce_dec);
+
+	return 0;
+fail:
+	skx_remove();
+	return rc;
+}
+
+static void __exit skx_exit(void)
+{
+	edac_dbg(2, "\n");
+	mce_unregister_decode_chain(&skx_mce_dec);
+	skx_remove();
+	teardown_skx_debug();
+}
+
+module_init(skx_init);
+module_exit(skx_exit);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Tony Luck");
+MODULE_DESCRIPTION("MC Driver for Intel Skylake server processors");
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
new file mode 100644
index 000000000..ba9de54a7
--- /dev/null
+++ b/drivers/edac/synopsys_edac.c
@@ -0,0 +1,534 @@
+/*
+ * Synopsys DDR ECC Driver
+ * This driver is based on ppc4xx_edac.c drivers
+ *
+ * Copyright (C) 2012 - 2014 Xilinx, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details
+ */
+
+#include <linux/edac.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "edac_module.h"
+
+/* Number of cs_rows needed per memory controller */
+#define SYNPS_EDAC_NR_CSROWS	1
+
+/* Number of channels per memory controller */
+#define SYNPS_EDAC_NR_CHANS	1
+
+/* Granularity of reported error in bytes */
+#define SYNPS_EDAC_ERR_GRAIN	1
+
+#define SYNPS_EDAC_MSG_SIZE	256
+
+#define SYNPS_EDAC_MOD_STRING	"synps_edac"
+#define SYNPS_EDAC_MOD_VER	"1"
+
+/* Synopsys DDR memory controller registers that are relevant to ECC */
+#define CTRL_OFST		0x0
+#define T_ZQ_OFST		0xA4
+
+/* ECC control register */
+#define ECC_CTRL_OFST		0xC4
+/* ECC log register */
+#define CE_LOG_OFST		0xC8
+/* ECC address register */
+#define CE_ADDR_OFST		0xCC
+/* ECC data[31:0] register */
+#define CE_DATA_31_0_OFST	0xD0
+
+/* Uncorrectable error info registers */
+#define UE_LOG_OFST		0xDC
+#define UE_ADDR_OFST		0xE0
+#define UE_DATA_31_0_OFST	0xE4
+
+#define STAT_OFST		0xF0
+#define SCRUB_OFST		0xF4
+
+/* Control register bit field definitions */
+#define CTRL_BW_MASK		0xC
+#define CTRL_BW_SHIFT		2
+
+#define DDRCTL_WDTH_16		1
+#define DDRCTL_WDTH_32		0
+
+/* ZQ register bit field definitions */
+#define T_ZQ_DDRMODE_MASK	0x2
+
+/* ECC control register bit field definitions */
+#define ECC_CTRL_CLR_CE_ERR	0x2
+#define ECC_CTRL_CLR_UE_ERR	0x1
+
+/* ECC correctable/uncorrectable error log register definitions */
+#define LOG_VALID		0x1
+#define CE_LOG_BITPOS_MASK	0xFE
+#define CE_LOG_BITPOS_SHIFT	1
+
+/* ECC correctable/uncorrectable error address register definitions */
+#define ADDR_COL_MASK		0xFFF
+#define ADDR_ROW_MASK		0xFFFF000
+#define ADDR_ROW_SHIFT		12
+#define ADDR_BANK_MASK		0x70000000
+#define ADDR_BANK_SHIFT		28
+
+/* ECC statistic register definitions */
+#define STAT_UECNT_MASK		0xFF
+#define STAT_CECNT_MASK		0xFF00
+#define STAT_CECNT_SHIFT	8
+
+/* ECC scrub register definitions */
+#define SCRUB_MODE_MASK		0x7
+#define SCRUB_MODE_SECDED	0x4
+
+/**
+ * struct ecc_error_info - ECC error log information
+ * @row:	Row number
+ * @col:	Column number
+ * @bank:	Bank number
+ * @bitpos:	Bit position
+ * @data:	Data causing the error
+ */
+struct ecc_error_info {
+	u32 row;
+	u32 col;
+	u32 bank;
+	u32 bitpos;
+	u32 data;
+};
+
+/**
+ * struct synps_ecc_status - ECC status information to report
+ * @ce_cnt:	Correctable error count
+ * @ue_cnt:	Uncorrectable error count
+ * @ceinfo:	Correctable error log information
+ * @ueinfo:	Uncorrectable error log information
+ */
+struct synps_ecc_status {
+	u32 ce_cnt;
+	u32 ue_cnt;
+	struct ecc_error_info ceinfo;
+	struct ecc_error_info ueinfo;
+};
+
+/**
+ * struct synps_edac_priv - DDR memory controller private instance data
+ * @baseaddr:	Base address of the DDR controller
+ * @message:	Buffer for framing the event specific info
+ * @stat:	ECC status information
+ * @ce_cnt:	Correctable Error count
+ * @ue_cnt:	Uncorrectable Error count
+ */
+struct synps_edac_priv {
+	void __iomem *baseaddr;
+	char message[SYNPS_EDAC_MSG_SIZE];
+	struct synps_ecc_status stat;
+	u32 ce_cnt;
+	u32 ue_cnt;
+};
+
+/**
+ * synps_edac_geterror_info - Get the current ecc error info
+ * @base:	Pointer to the base address of the ddr memory controller
+ * @p:		Pointer to the synopsys ecc status structure
+ *
+ * Determines there is any ecc error or not
+ *
+ * Return: one if there is no error otherwise returns zero
+ */
+static int synps_edac_geterror_info(void __iomem *base,
+				    struct synps_ecc_status *p)
+{
+	u32 regval, clearval = 0;
+
+	regval = readl(base + STAT_OFST);
+	if (!regval)
+		return 1;
+
+	p->ce_cnt = (regval & STAT_CECNT_MASK) >> STAT_CECNT_SHIFT;
+	p->ue_cnt = regval & STAT_UECNT_MASK;
+
+	regval = readl(base + CE_LOG_OFST);
+	if (!(p->ce_cnt && (regval & LOG_VALID)))
+		goto ue_err;
+
+	p->ceinfo.bitpos = (regval & CE_LOG_BITPOS_MASK) >> CE_LOG_BITPOS_SHIFT;
+	regval = readl(base + CE_ADDR_OFST);
+	p->ceinfo.row = (regval & ADDR_ROW_MASK) >> ADDR_ROW_SHIFT;
+	p->ceinfo.col = regval & ADDR_COL_MASK;
+	p->ceinfo.bank = (regval & ADDR_BANK_MASK) >> ADDR_BANK_SHIFT;
+	p->ceinfo.data = readl(base + CE_DATA_31_0_OFST);
+	edac_dbg(3, "ce bit position: %d data: %d\n", p->ceinfo.bitpos,
+		 p->ceinfo.data);
+	clearval = ECC_CTRL_CLR_CE_ERR;
+
+ue_err:
+	regval = readl(base + UE_LOG_OFST);
+	if (!(p->ue_cnt && (regval & LOG_VALID)))
+		goto out;
+
+	regval = readl(base + UE_ADDR_OFST);
+	p->ueinfo.row = (regval & ADDR_ROW_MASK) >> ADDR_ROW_SHIFT;
+	p->ueinfo.col = regval & ADDR_COL_MASK;
+	p->ueinfo.bank = (regval & ADDR_BANK_MASK) >> ADDR_BANK_SHIFT;
+	p->ueinfo.data = readl(base + UE_DATA_31_0_OFST);
+	clearval |= ECC_CTRL_CLR_UE_ERR;
+
+out:
+	writel(clearval, base + ECC_CTRL_OFST);
+	writel(0x0, base + ECC_CTRL_OFST);
+
+	return 0;
+}
+
+/**
+ * synps_edac_handle_error - Handle controller error types CE and UE
+ * @mci:	Pointer to the edac memory controller instance
+ * @p:		Pointer to the synopsys ecc status structure
+ *
+ * Handles the controller ECC correctable and un correctable error.
+ */
+static void synps_edac_handle_error(struct mem_ctl_info *mci,
+				    struct synps_ecc_status *p)
+{
+	struct synps_edac_priv *priv = mci->pvt_info;
+	struct ecc_error_info *pinf;
+
+	if (p->ce_cnt) {
+		pinf = &p->ceinfo;
+		snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
+			 "DDR ECC error type :%s Row %d Bank %d Col %d ",
+			 "CE", pinf->row, pinf->bank, pinf->col);
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci,
+				     p->ce_cnt, 0, 0, 0, 0, 0, -1,
+				     priv->message, "");
+	}
+
+	if (p->ue_cnt) {
+		pinf = &p->ueinfo;
+		snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
+			 "DDR ECC error type :%s Row %d Bank %d Col %d ",
+			 "UE", pinf->row, pinf->bank, pinf->col);
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci,
+				     p->ue_cnt, 0, 0, 0, 0, 0, -1,
+				     priv->message, "");
+	}
+
+	memset(p, 0, sizeof(*p));
+}
+
+/**
+ * synps_edac_check - Check controller for ECC errors
+ * @mci:	Pointer to the edac memory controller instance
+ *
+ * Used to check and post ECC errors. Called by the polling thread
+ */
+static void synps_edac_check(struct mem_ctl_info *mci)
+{
+	struct synps_edac_priv *priv = mci->pvt_info;
+	int status;
+
+	status = synps_edac_geterror_info(priv->baseaddr, &priv->stat);
+	if (status)
+		return;
+
+	priv->ce_cnt += priv->stat.ce_cnt;
+	priv->ue_cnt += priv->stat.ue_cnt;
+	synps_edac_handle_error(mci, &priv->stat);
+
+	edac_dbg(3, "Total error count ce %d ue %d\n",
+		 priv->ce_cnt, priv->ue_cnt);
+}
+
+/**
+ * synps_edac_get_dtype - Return the controller memory width
+ * @base:	Pointer to the ddr memory controller base address
+ *
+ * Get the EDAC device type width appropriate for the current controller
+ * configuration.
+ *
+ * Return: a device type width enumeration.
+ */
+static enum dev_type synps_edac_get_dtype(const void __iomem *base)
+{
+	enum dev_type dt;
+	u32 width;
+
+	width = readl(base + CTRL_OFST);
+	width = (width & CTRL_BW_MASK) >> CTRL_BW_SHIFT;
+
+	switch (width) {
+	case DDRCTL_WDTH_16:
+		dt = DEV_X2;
+		break;
+	case DDRCTL_WDTH_32:
+		dt = DEV_X4;
+		break;
+	default:
+		dt = DEV_UNKNOWN;
+	}
+
+	return dt;
+}
+
+/**
+ * synps_edac_get_eccstate - Return the controller ecc enable/disable status
+ * @base:	Pointer to the ddr memory controller base address
+ *
+ * Get the ECC enable/disable status for the controller
+ *
+ * Return: a ecc status boolean i.e true/false - enabled/disabled.
+ */
+static bool synps_edac_get_eccstate(void __iomem *base)
+{
+	enum dev_type dt;
+	u32 ecctype;
+	bool state = false;
+
+	dt = synps_edac_get_dtype(base);
+	if (dt == DEV_UNKNOWN)
+		return state;
+
+	ecctype = readl(base + SCRUB_OFST) & SCRUB_MODE_MASK;
+	if ((ecctype == SCRUB_MODE_SECDED) && (dt == DEV_X2))
+		state = true;
+
+	return state;
+}
+
+/**
+ * synps_edac_get_memsize - reads the size of the attached memory device
+ *
+ * Return: the memory size in bytes
+ */
+static u32 synps_edac_get_memsize(void)
+{
+	struct sysinfo inf;
+
+	si_meminfo(&inf);
+
+	return inf.totalram * inf.mem_unit;
+}
+
+/**
+ * synps_edac_get_mtype - Returns controller memory type
+ * @base:	pointer to the synopsys ecc status structure
+ *
+ * Get the EDAC memory type appropriate for the current controller
+ * configuration.
+ *
+ * Return: a memory type enumeration.
+ */
+static enum mem_type synps_edac_get_mtype(const void __iomem *base)
+{
+	enum mem_type mt;
+	u32 memtype;
+
+	memtype = readl(base + T_ZQ_OFST);
+
+	if (memtype & T_ZQ_DDRMODE_MASK)
+		mt = MEM_DDR3;
+	else
+		mt = MEM_DDR2;
+
+	return mt;
+}
+
+/**
+ * synps_edac_init_csrows - Initialize the cs row data
+ * @mci:	Pointer to the edac memory controller instance
+ *
+ * Initializes the chip select rows associated with the EDAC memory
+ * controller instance
+ *
+ * Return: Unconditionally 0.
+ */
+static int synps_edac_init_csrows(struct mem_ctl_info *mci)
+{
+	struct csrow_info *csi;
+	struct dimm_info *dimm;
+	struct synps_edac_priv *priv = mci->pvt_info;
+	u32 size;
+	int row, j;
+
+	for (row = 0; row < mci->nr_csrows; row++) {
+		csi = mci->csrows[row];
+		size = synps_edac_get_memsize();
+
+		for (j = 0; j < csi->nr_channels; j++) {
+			dimm            = csi->channels[j]->dimm;
+			dimm->edac_mode = EDAC_SECDED;
+			dimm->mtype     = synps_edac_get_mtype(priv->baseaddr);
+			dimm->nr_pages  = (size >> PAGE_SHIFT) / csi->nr_channels;
+			dimm->grain     = SYNPS_EDAC_ERR_GRAIN;
+			dimm->dtype     = synps_edac_get_dtype(priv->baseaddr);
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * synps_edac_mc_init - Initialize driver instance
+ * @mci:	Pointer to the edac memory controller instance
+ * @pdev:	Pointer to the platform_device struct
+ *
+ * Performs initialization of the EDAC memory controller instance and
+ * related driver-private data associated with the memory controller the
+ * instance is bound to.
+ *
+ * Return: Always zero.
+ */
+static int synps_edac_mc_init(struct mem_ctl_info *mci,
+				 struct platform_device *pdev)
+{
+	int status;
+	struct synps_edac_priv *priv;
+
+	mci->pdev = &pdev->dev;
+	priv = mci->pvt_info;
+	platform_set_drvdata(pdev, mci);
+
+	/* Initialize controller capabilities and configuration */
+	mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR2;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+	mci->scrub_cap = SCRUB_HW_SRC;
+	mci->scrub_mode = SCRUB_NONE;
+
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->ctl_name = "synps_ddr_controller";
+	mci->dev_name = SYNPS_EDAC_MOD_STRING;
+	mci->mod_name = SYNPS_EDAC_MOD_VER;
+
+	edac_op_state = EDAC_OPSTATE_POLL;
+	mci->edac_check = synps_edac_check;
+	mci->ctl_page_to_phys = NULL;
+
+	status = synps_edac_init_csrows(mci);
+
+	return status;
+}
+
+/**
+ * synps_edac_mc_probe - Check controller and bind driver
+ * @pdev:	Pointer to the platform_device struct
+ *
+ * Probes a specific controller instance for binding with the driver.
+ *
+ * Return: 0 if the controller instance was successfully bound to the
+ * driver; otherwise, < 0 on error.
+ */
+static int synps_edac_mc_probe(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[2];
+	struct synps_edac_priv *priv;
+	int rc;
+	struct resource *res;
+	void __iomem *baseaddr;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	baseaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(baseaddr))
+		return PTR_ERR(baseaddr);
+
+	if (!synps_edac_get_eccstate(baseaddr)) {
+		edac_printk(KERN_INFO, EDAC_MC, "ECC not enabled\n");
+		return -ENXIO;
+	}
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = SYNPS_EDAC_NR_CSROWS;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = SYNPS_EDAC_NR_CHANS;
+	layers[1].is_virt_csrow = false;
+
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
+			    sizeof(struct synps_edac_priv));
+	if (!mci) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Failed memory allocation for mc instance\n");
+		return -ENOMEM;
+	}
+
+	priv = mci->pvt_info;
+	priv->baseaddr = baseaddr;
+	rc = synps_edac_mc_init(mci, pdev);
+	if (rc) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Failed to initialize instance\n");
+		goto free_edac_mc;
+	}
+
+	rc = edac_mc_add_mc(mci);
+	if (rc) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Failed to register with EDAC core\n");
+		goto free_edac_mc;
+	}
+
+	/*
+	 * Start capturing the correctable and uncorrectable errors. A write of
+	 * 0 starts the counters.
+	 */
+	writel(0x0, baseaddr + ECC_CTRL_OFST);
+	return rc;
+
+free_edac_mc:
+	edac_mc_free(mci);
+
+	return rc;
+}
+
+/**
+ * synps_edac_mc_remove - Unbind driver from controller
+ * @pdev:	Pointer to the platform_device struct
+ *
+ * Return: Unconditionally 0
+ */
+static int synps_edac_mc_remove(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+	edac_mc_del_mc(&pdev->dev);
+	edac_mc_free(mci);
+
+	return 0;
+}
+
+static const struct of_device_id synps_edac_match[] = {
+	{ .compatible = "xlnx,zynq-ddrc-a05", },
+	{ /* end of table */ }
+};
+
+MODULE_DEVICE_TABLE(of, synps_edac_match);
+
+static struct platform_driver synps_edac_mc_driver = {
+	.driver = {
+		   .name = "synopsys-edac",
+		   .of_match_table = synps_edac_match,
+		   },
+	.probe = synps_edac_mc_probe,
+	.remove = synps_edac_mc_remove,
+};
+
+module_platform_driver(synps_edac_mc_driver);
+
+MODULE_AUTHOR("Xilinx Inc");
+MODULE_DESCRIPTION("Synopsys DDR ECC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/edac/thunderx_edac.c b/drivers/edac/thunderx_edac.c
new file mode 100644
index 000000000..34be60fe6
--- /dev/null
+++ b/drivers/edac/thunderx_edac.c
@@ -0,0 +1,2151 @@
+/*
+ * Cavium ThunderX memory controller kernel module
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright Cavium, Inc. (C) 2015-2017. All rights reserved.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/edac.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/stop_machine.h>
+#include <linux/delay.h>
+#include <linux/sizes.h>
+#include <linux/atomic.h>
+#include <linux/bitfield.h>
+#include <linux/circ_buf.h>
+
+#include <asm/page.h>
+
+#include "edac_module.h"
+
+#define phys_to_pfn(phys)	(PFN_DOWN(phys))
+
+#define THUNDERX_NODE		GENMASK(45, 44)
+
+enum {
+	ERR_CORRECTED	= 1,
+	ERR_UNCORRECTED	= 2,
+	ERR_UNKNOWN	= 3,
+};
+
+#define MAX_SYNDROME_REGS 4
+
+struct error_syndrome {
+	u64 reg[MAX_SYNDROME_REGS];
+};
+
+struct error_descr {
+	int	type;
+	u64	mask;
+	char	*descr;
+};
+
+static void decode_register(char *str, size_t size,
+			   const struct error_descr *descr,
+			   const uint64_t reg)
+{
+	int ret = 0;
+
+	while (descr->type && descr->mask && descr->descr) {
+		if (reg & descr->mask) {
+			ret = snprintf(str, size, "\n\t%s, %s",
+				       descr->type == ERR_CORRECTED ?
+					 "Corrected" : "Uncorrected",
+				       descr->descr);
+			str += ret;
+			size -= ret;
+		}
+		descr++;
+	}
+}
+
+static unsigned long get_bits(unsigned long data, int pos, int width)
+{
+	return (data >> pos) & ((1 << width) - 1);
+}
+
+#define L2C_CTL			0x87E080800000
+#define L2C_CTL_DISIDXALIAS	BIT(0)
+
+#define PCI_DEVICE_ID_THUNDER_LMC 0xa022
+
+#define LMC_FADR		0x20
+#define LMC_FADR_FDIMM(x)	((x >> 37) & 0x1)
+#define LMC_FADR_FBUNK(x)	((x >> 36) & 0x1)
+#define LMC_FADR_FBANK(x)	((x >> 32) & 0xf)
+#define LMC_FADR_FROW(x)	((x >> 14) & 0xffff)
+#define LMC_FADR_FCOL(x)	((x >> 0) & 0x1fff)
+
+#define LMC_NXM_FADR		0x28
+#define LMC_ECC_SYND		0x38
+
+#define LMC_ECC_PARITY_TEST	0x108
+
+#define LMC_INT_W1S		0x150
+
+#define LMC_INT_ENA_W1C		0x158
+#define LMC_INT_ENA_W1S		0x160
+
+#define LMC_CONFIG		0x188
+
+#define LMC_CONFIG_BG2		BIT(62)
+#define LMC_CONFIG_RANK_ENA	BIT(42)
+#define LMC_CONFIG_PBANK_LSB(x)	(((x) >> 5) & 0xF)
+#define LMC_CONFIG_ROW_LSB(x)	(((x) >> 2) & 0x7)
+
+#define LMC_CONTROL		0x190
+#define LMC_CONTROL_XOR_BANK	BIT(16)
+
+#define LMC_INT			0x1F0
+
+#define LMC_INT_DDR_ERR		BIT(11)
+#define LMC_INT_DED_ERR		(0xFUL << 5)
+#define LMC_INT_SEC_ERR         (0xFUL << 1)
+#define LMC_INT_NXM_WR_MASK	BIT(0)
+
+#define LMC_DDR_PLL_CTL		0x258
+#define LMC_DDR_PLL_CTL_DDR4	BIT(29)
+
+#define LMC_FADR_SCRAMBLED	0x330
+
+#define LMC_INT_UE              (LMC_INT_DDR_ERR | LMC_INT_DED_ERR | \
+				 LMC_INT_NXM_WR_MASK)
+
+#define LMC_INT_CE		(LMC_INT_SEC_ERR)
+
+static const struct error_descr lmc_errors[] = {
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = LMC_INT_SEC_ERR,
+		.descr = "Single-bit ECC error",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = LMC_INT_DDR_ERR,
+		.descr = "DDR chip error",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = LMC_INT_DED_ERR,
+		.descr = "Double-bit ECC error",
+	},
+	{
+		.type = ERR_UNCORRECTED,
+		.mask = LMC_INT_NXM_WR_MASK,
+		.descr = "Non-existent memory write",
+	},
+	{0, 0, NULL},
+};
+
+#define LMC_INT_EN_DDR_ERROR_ALERT_ENA	BIT(5)
+#define LMC_INT_EN_DLCRAM_DED_ERR	BIT(4)
+#define LMC_INT_EN_DLCRAM_SEC_ERR	BIT(3)
+#define LMC_INT_INTR_DED_ENA		BIT(2)
+#define LMC_INT_INTR_SEC_ENA		BIT(1)
+#define LMC_INT_INTR_NXM_WR_ENA		BIT(0)
+
+#define LMC_INT_ENA_ALL			GENMASK(5, 0)
+
+#define LMC_DDR_PLL_CTL		0x258
+#define LMC_DDR_PLL_CTL_DDR4	BIT(29)
+
+#define LMC_CONTROL		0x190
+#define LMC_CONTROL_RDIMM	BIT(0)
+
+#define LMC_SCRAM_FADR		0x330
+
+#define LMC_CHAR_MASK0		0x228
+#define LMC_CHAR_MASK2		0x238
+
+#define RING_ENTRIES	8
+
+struct debugfs_entry {
+	const char *name;
+	umode_t mode;
+	const struct file_operations fops;
+};
+
+struct lmc_err_ctx {
+	u64 reg_int;
+	u64 reg_fadr;
+	u64 reg_nxm_fadr;
+	u64 reg_scram_fadr;
+	u64 reg_ecc_synd;
+};
+
+struct thunderx_lmc {
+	void __iomem *regs;
+	struct pci_dev *pdev;
+	struct msix_entry msix_ent;
+
+	atomic_t ecc_int;
+
+	u64 mask0;
+	u64 mask2;
+	u64 parity_test;
+	u64 node;
+
+	int xbits;
+	int bank_width;
+	int pbank_lsb;
+	int dimm_lsb;
+	int rank_lsb;
+	int bank_lsb;
+	int row_lsb;
+	int col_hi_lsb;
+
+	int xor_bank;
+	int l2c_alias;
+
+	struct page *mem;
+
+	struct lmc_err_ctx err_ctx[RING_ENTRIES];
+	unsigned long ring_head;
+	unsigned long ring_tail;
+};
+
+#define ring_pos(pos, size) ((pos) & (size - 1))
+
+#define DEBUGFS_STRUCT(_name, _mode, _write, _read)			    \
+static struct debugfs_entry debugfs_##_name = {				    \
+	.name = __stringify(_name),					    \
+	.mode = VERIFY_OCTAL_PERMISSIONS(_mode),			    \
+	.fops = {							    \
+		.open = simple_open,					    \
+		.write = _write,					    \
+		.read  = _read,						    \
+		.llseek = generic_file_llseek,				    \
+	},								    \
+}
+
+#define DEBUGFS_FIELD_ATTR(_type, _field)				    \
+static ssize_t thunderx_##_type##_##_field##_read(struct file *file,	    \
+					    char __user *data,		    \
+					    size_t count, loff_t *ppos)	    \
+{									    \
+	struct thunderx_##_type *pdata = file->private_data;		    \
+	char buf[20];							    \
+									    \
+	snprintf(buf, count, "0x%016llx", pdata->_field);		    \
+	return simple_read_from_buffer(data, count, ppos,		    \
+				       buf, sizeof(buf));		    \
+}									    \
+									    \
+static ssize_t thunderx_##_type##_##_field##_write(struct file *file,	    \
+					     const char __user *data,	    \
+					     size_t count, loff_t *ppos)    \
+{									    \
+	struct thunderx_##_type *pdata = file->private_data;		    \
+	int res;							    \
+									    \
+	res = kstrtoull_from_user(data, count, 0, &pdata->_field);	    \
+									    \
+	return res ? res : count;					    \
+}									    \
+									    \
+DEBUGFS_STRUCT(_field, 0600,						    \
+		   thunderx_##_type##_##_field##_write,			    \
+		   thunderx_##_type##_##_field##_read)			    \
+
+#define DEBUGFS_REG_ATTR(_type, _name, _reg)				    \
+static ssize_t thunderx_##_type##_##_name##_read(struct file *file,	    \
+					   char __user *data,		    \
+					   size_t count, loff_t *ppos)      \
+{									    \
+	struct thunderx_##_type *pdata = file->private_data;		    \
+	char buf[20];							    \
+									    \
+	sprintf(buf, "0x%016llx", readq(pdata->regs + _reg));		    \
+	return simple_read_from_buffer(data, count, ppos,		    \
+				       buf, sizeof(buf));		    \
+}									    \
+									    \
+static ssize_t thunderx_##_type##_##_name##_write(struct file *file,	    \
+					    const char __user *data,	    \
+					    size_t count, loff_t *ppos)     \
+{									    \
+	struct thunderx_##_type *pdata = file->private_data;		    \
+	u64 val;							    \
+	int res;							    \
+									    \
+	res = kstrtoull_from_user(data, count, 0, &val);		    \
+									    \
+	if (!res) {							    \
+		writeq(val, pdata->regs + _reg);			    \
+		res = count;						    \
+	}								    \
+									    \
+	return res;							    \
+}									    \
+									    \
+DEBUGFS_STRUCT(_name, 0600,						    \
+	       thunderx_##_type##_##_name##_write,			    \
+	       thunderx_##_type##_##_name##_read)
+
+#define LMC_DEBUGFS_ENT(_field)	DEBUGFS_FIELD_ATTR(lmc, _field)
+
+/*
+ * To get an ECC error injected, the following steps are needed:
+ * - Setup the ECC injection by writing the appropriate parameters:
+ *	echo <bit mask value> > /sys/kernel/debug/<device number>/ecc_mask0
+ *	echo <bit mask value> > /sys/kernel/debug/<device number>/ecc_mask2
+ *	echo 0x802 > /sys/kernel/debug/<device number>/ecc_parity_test
+ * - Do the actual injection:
+ *	echo 1 > /sys/kernel/debug/<device number>/inject_ecc
+ */
+static ssize_t thunderx_lmc_inject_int_write(struct file *file,
+					     const char __user *data,
+					     size_t count, loff_t *ppos)
+{
+	struct thunderx_lmc *lmc = file->private_data;
+	u64 val;
+	int res;
+
+	res = kstrtoull_from_user(data, count, 0, &val);
+
+	if (!res) {
+		/* Trigger the interrupt */
+		writeq(val, lmc->regs + LMC_INT_W1S);
+		res = count;
+	}
+
+	return res;
+}
+
+static ssize_t thunderx_lmc_int_read(struct file *file,
+				     char __user *data,
+				     size_t count, loff_t *ppos)
+{
+	struct thunderx_lmc *lmc = file->private_data;
+	char buf[20];
+	u64 lmc_int = readq(lmc->regs + LMC_INT);
+
+	snprintf(buf, sizeof(buf), "0x%016llx", lmc_int);
+	return simple_read_from_buffer(data, count, ppos, buf, sizeof(buf));
+}
+
+#define TEST_PATTERN 0xa5
+
+static int inject_ecc_fn(void *arg)
+{
+	struct thunderx_lmc *lmc = arg;
+	uintptr_t addr, phys;
+	unsigned int cline_size = cache_line_size();
+	const unsigned int lines = PAGE_SIZE / cline_size;
+	unsigned int i, cl_idx;
+
+	addr = (uintptr_t)page_address(lmc->mem);
+	phys = (uintptr_t)page_to_phys(lmc->mem);
+
+	cl_idx = (phys & 0x7f) >> 4;
+	lmc->parity_test &= ~(7ULL << 8);
+	lmc->parity_test |= (cl_idx << 8);
+
+	writeq(lmc->mask0, lmc->regs + LMC_CHAR_MASK0);
+	writeq(lmc->mask2, lmc->regs + LMC_CHAR_MASK2);
+	writeq(lmc->parity_test, lmc->regs + LMC_ECC_PARITY_TEST);
+
+	readq(lmc->regs + LMC_CHAR_MASK0);
+	readq(lmc->regs + LMC_CHAR_MASK2);
+	readq(lmc->regs + LMC_ECC_PARITY_TEST);
+
+	for (i = 0; i < lines; i++) {
+		memset((void *)addr, TEST_PATTERN, cline_size);
+		barrier();
+
+		/*
+		 * Flush L1 cachelines to the PoC (L2).
+		 * This will cause cacheline eviction to the L2.
+		 */
+		asm volatile("dc civac, %0\n"
+			     "dsb sy\n"
+			     : : "r"(addr + i * cline_size));
+	}
+
+	for (i = 0; i < lines; i++) {
+		/*
+		 * Flush L2 cachelines to the DRAM.
+		 * This will cause cacheline eviction to the DRAM
+		 * and ECC corruption according to the masks set.
+		 */
+		__asm__ volatile("sys #0,c11,C1,#2, %0\n"
+				 : : "r"(phys + i * cline_size));
+	}
+
+	for (i = 0; i < lines; i++) {
+		/*
+		 * Invalidate L2 cachelines.
+		 * The subsequent load will cause cacheline fetch
+		 * from the DRAM and an error interrupt
+		 */
+		__asm__ volatile("sys #0,c11,C1,#1, %0"
+				 : : "r"(phys + i * cline_size));
+	}
+
+	for (i = 0; i < lines; i++) {
+		/*
+		 * Invalidate L1 cachelines.
+		 * The subsequent load will cause cacheline fetch
+		 * from the L2 and/or DRAM
+		 */
+		asm volatile("dc ivac, %0\n"
+			     "dsb sy\n"
+			     : : "r"(addr + i * cline_size));
+	}
+
+	return 0;
+}
+
+static ssize_t thunderx_lmc_inject_ecc_write(struct file *file,
+					     const char __user *data,
+					     size_t count, loff_t *ppos)
+{
+	struct thunderx_lmc *lmc = file->private_data;
+	unsigned int cline_size = cache_line_size();
+	u8 *tmp;
+	void __iomem *addr;
+	unsigned int offs, timeout = 100000;
+
+	atomic_set(&lmc->ecc_int, 0);
+
+	lmc->mem = alloc_pages_node(lmc->node, GFP_KERNEL, 0);
+	if (!lmc->mem)
+		return -ENOMEM;
+
+	tmp = kmalloc(cline_size, GFP_KERNEL);
+	if (!tmp) {
+		__free_pages(lmc->mem, 0);
+		return -ENOMEM;
+	}
+
+	addr = page_address(lmc->mem);
+
+	while (!atomic_read(&lmc->ecc_int) && timeout--) {
+		stop_machine(inject_ecc_fn, lmc, NULL);
+
+		for (offs = 0; offs < PAGE_SIZE; offs += cline_size) {
+			/*
+			 * Do a load from the previously rigged location
+			 * This should generate an error interrupt.
+			 */
+			memcpy(tmp, addr + offs, cline_size);
+			asm volatile("dsb ld\n");
+		}
+	}
+
+	kfree(tmp);
+	__free_pages(lmc->mem, 0);
+
+	return count;
+}
+
+LMC_DEBUGFS_ENT(mask0);
+LMC_DEBUGFS_ENT(mask2);
+LMC_DEBUGFS_ENT(parity_test);
+
+DEBUGFS_STRUCT(inject_int, 0200, thunderx_lmc_inject_int_write, NULL);
+DEBUGFS_STRUCT(inject_ecc, 0200, thunderx_lmc_inject_ecc_write, NULL);
+DEBUGFS_STRUCT(int_w1c, 0400, NULL, thunderx_lmc_int_read);
+
+struct debugfs_entry *lmc_dfs_ents[] = {
+	&debugfs_mask0,
+	&debugfs_mask2,
+	&debugfs_parity_test,
+	&debugfs_inject_ecc,
+	&debugfs_inject_int,
+	&debugfs_int_w1c,
+};
+
+static int thunderx_create_debugfs_nodes(struct dentry *parent,
+					  struct debugfs_entry *attrs[],
+					  void *data,
+					  size_t num)
+{
+	int i;
+	struct dentry *ent;
+
+	if (!IS_ENABLED(CONFIG_EDAC_DEBUG))
+		return 0;
+
+	if (!parent)
+		return -ENOENT;
+
+	for (i = 0; i < num; i++) {
+		ent = edac_debugfs_create_file(attrs[i]->name, attrs[i]->mode,
+					       parent, data, &attrs[i]->fops);
+
+		if (!ent)
+			break;
+	}
+
+	return i;
+}
+
+static phys_addr_t thunderx_faddr_to_phys(u64 faddr, struct thunderx_lmc *lmc)
+{
+	phys_addr_t addr = 0;
+	int bank, xbits;
+
+	addr |= lmc->node << 40;
+	addr |= LMC_FADR_FDIMM(faddr) << lmc->dimm_lsb;
+	addr |= LMC_FADR_FBUNK(faddr) << lmc->rank_lsb;
+	addr |= LMC_FADR_FROW(faddr) << lmc->row_lsb;
+	addr |= (LMC_FADR_FCOL(faddr) >> 4) << lmc->col_hi_lsb;
+
+	bank = LMC_FADR_FBANK(faddr) << lmc->bank_lsb;
+
+	if (lmc->xor_bank)
+		bank ^= get_bits(addr, 12 + lmc->xbits, lmc->bank_width);
+
+	addr |= bank << lmc->bank_lsb;
+
+	xbits = PCI_FUNC(lmc->pdev->devfn);
+
+	if (lmc->l2c_alias)
+		xbits ^= get_bits(addr, 20, lmc->xbits) ^
+			 get_bits(addr, 12, lmc->xbits);
+
+	addr |= xbits << 7;
+
+	return addr;
+}
+
+static unsigned int thunderx_get_num_lmcs(unsigned int node)
+{
+	unsigned int number = 0;
+	struct pci_dev *pdev = NULL;
+
+	do {
+		pdev = pci_get_device(PCI_VENDOR_ID_CAVIUM,
+				      PCI_DEVICE_ID_THUNDER_LMC,
+				      pdev);
+		if (pdev) {
+#ifdef CONFIG_NUMA
+			if (pdev->dev.numa_node == node)
+				number++;
+#else
+			number++;
+#endif
+		}
+	} while (pdev);
+
+	return number;
+}
+
+#define LMC_MESSAGE_SIZE	120
+#define LMC_OTHER_SIZE		(50 * ARRAY_SIZE(lmc_errors))
+
+static irqreturn_t thunderx_lmc_err_isr(int irq, void *dev_id)
+{
+	struct mem_ctl_info *mci = dev_id;
+	struct thunderx_lmc *lmc = mci->pvt_info;
+
+	unsigned long head = ring_pos(lmc->ring_head, ARRAY_SIZE(lmc->err_ctx));
+	struct lmc_err_ctx *ctx = &lmc->err_ctx[head];
+
+	writeq(0, lmc->regs + LMC_CHAR_MASK0);
+	writeq(0, lmc->regs + LMC_CHAR_MASK2);
+	writeq(0x2, lmc->regs + LMC_ECC_PARITY_TEST);
+
+	ctx->reg_int = readq(lmc->regs + LMC_INT);
+	ctx->reg_fadr = readq(lmc->regs + LMC_FADR);
+	ctx->reg_nxm_fadr = readq(lmc->regs + LMC_NXM_FADR);
+	ctx->reg_scram_fadr = readq(lmc->regs + LMC_SCRAM_FADR);
+	ctx->reg_ecc_synd = readq(lmc->regs + LMC_ECC_SYND);
+
+	lmc->ring_head++;
+
+	atomic_set(&lmc->ecc_int, 1);
+
+	/* Clear the interrupt */
+	writeq(ctx->reg_int, lmc->regs + LMC_INT);
+
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t thunderx_lmc_threaded_isr(int irq, void *dev_id)
+{
+	struct mem_ctl_info *mci = dev_id;
+	struct thunderx_lmc *lmc = mci->pvt_info;
+	phys_addr_t phys_addr;
+
+	unsigned long tail;
+	struct lmc_err_ctx *ctx;
+
+	irqreturn_t ret = IRQ_NONE;
+
+	char *msg;
+	char *other;
+
+	msg = kmalloc(LMC_MESSAGE_SIZE, GFP_KERNEL);
+	other =  kmalloc(LMC_OTHER_SIZE, GFP_KERNEL);
+
+	if (!msg || !other)
+		goto err_free;
+
+	while (CIRC_CNT(lmc->ring_head, lmc->ring_tail,
+		ARRAY_SIZE(lmc->err_ctx))) {
+		tail = ring_pos(lmc->ring_tail, ARRAY_SIZE(lmc->err_ctx));
+
+		ctx = &lmc->err_ctx[tail];
+
+		dev_dbg(&lmc->pdev->dev, "LMC_INT: %016llx\n",
+			ctx->reg_int);
+		dev_dbg(&lmc->pdev->dev, "LMC_FADR: %016llx\n",
+			ctx->reg_fadr);
+		dev_dbg(&lmc->pdev->dev, "LMC_NXM_FADR: %016llx\n",
+			ctx->reg_nxm_fadr);
+		dev_dbg(&lmc->pdev->dev, "LMC_SCRAM_FADR: %016llx\n",
+			ctx->reg_scram_fadr);
+		dev_dbg(&lmc->pdev->dev, "LMC_ECC_SYND: %016llx\n",
+			ctx->reg_ecc_synd);
+
+		snprintf(msg, LMC_MESSAGE_SIZE,
+			 "DIMM %lld rank %lld bank %lld row %lld col %lld",
+			 LMC_FADR_FDIMM(ctx->reg_scram_fadr),
+			 LMC_FADR_FBUNK(ctx->reg_scram_fadr),
+			 LMC_FADR_FBANK(ctx->reg_scram_fadr),
+			 LMC_FADR_FROW(ctx->reg_scram_fadr),
+			 LMC_FADR_FCOL(ctx->reg_scram_fadr));
+
+		decode_register(other, LMC_OTHER_SIZE, lmc_errors,
+				ctx->reg_int);
+
+		phys_addr = thunderx_faddr_to_phys(ctx->reg_fadr, lmc);
+
+		if (ctx->reg_int & LMC_INT_UE)
+			edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+					     phys_to_pfn(phys_addr),
+					     offset_in_page(phys_addr),
+					     0, -1, -1, -1, msg, other);
+		else if (ctx->reg_int & LMC_INT_CE)
+			edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+					     phys_to_pfn(phys_addr),
+					     offset_in_page(phys_addr),
+					     0, -1, -1, -1, msg, other);
+
+		lmc->ring_tail++;
+	}
+
+	ret = IRQ_HANDLED;
+
+err_free:
+	kfree(msg);
+	kfree(other);
+
+	return ret;
+}
+
+static const struct pci_device_id thunderx_lmc_pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_LMC) },
+	{ 0, },
+};
+
+static inline int pci_dev_to_mc_idx(struct pci_dev *pdev)
+{
+	int node = dev_to_node(&pdev->dev);
+	int ret = PCI_FUNC(pdev->devfn);
+
+	ret += max(node, 0) << 3;
+
+	return ret;
+}
+
+static int thunderx_lmc_probe(struct pci_dev *pdev,
+				const struct pci_device_id *id)
+{
+	struct thunderx_lmc *lmc;
+	struct edac_mc_layer layer;
+	struct mem_ctl_info *mci;
+	u64 lmc_control, lmc_ddr_pll_ctl, lmc_config;
+	int ret;
+	u64 lmc_int;
+	void *l2c_ioaddr;
+
+	layer.type = EDAC_MC_LAYER_SLOT;
+	layer.size = 2;
+	layer.is_virt_csrow = false;
+
+	ret = pcim_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot enable PCI device: %d\n", ret);
+		return ret;
+	}
+
+	ret = pcim_iomap_regions(pdev, BIT(0), "thunderx_lmc");
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot map PCI resources: %d\n", ret);
+		return ret;
+	}
+
+	mci = edac_mc_alloc(pci_dev_to_mc_idx(pdev), 1, &layer,
+			    sizeof(struct thunderx_lmc));
+	if (!mci)
+		return -ENOMEM;
+
+	mci->pdev = &pdev->dev;
+	lmc = mci->pvt_info;
+
+	pci_set_drvdata(pdev, mci);
+
+	lmc->regs = pcim_iomap_table(pdev)[0];
+
+	lmc_control = readq(lmc->regs + LMC_CONTROL);
+	lmc_ddr_pll_ctl = readq(lmc->regs + LMC_DDR_PLL_CTL);
+	lmc_config = readq(lmc->regs + LMC_CONFIG);
+
+	if (lmc_control & LMC_CONTROL_RDIMM) {
+		mci->mtype_cap = FIELD_GET(LMC_DDR_PLL_CTL_DDR4,
+					   lmc_ddr_pll_ctl) ?
+				MEM_RDDR4 : MEM_RDDR3;
+	} else {
+		mci->mtype_cap = FIELD_GET(LMC_DDR_PLL_CTL_DDR4,
+					   lmc_ddr_pll_ctl) ?
+				MEM_DDR4 : MEM_DDR3;
+	}
+
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+
+	mci->mod_name = "thunderx-lmc";
+	mci->ctl_name = "thunderx-lmc";
+	mci->dev_name = dev_name(&pdev->dev);
+	mci->scrub_mode = SCRUB_NONE;
+
+	lmc->pdev = pdev;
+	lmc->msix_ent.entry = 0;
+
+	lmc->ring_head = 0;
+	lmc->ring_tail = 0;
+
+	ret = pci_enable_msix_exact(pdev, &lmc->msix_ent, 1);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot enable interrupt: %d\n", ret);
+		goto err_free;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, lmc->msix_ent.vector,
+					thunderx_lmc_err_isr,
+					thunderx_lmc_threaded_isr, 0,
+					"[EDAC] ThunderX LMC", mci);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot set ISR: %d\n", ret);
+		goto err_free;
+	}
+
+	lmc->node = FIELD_GET(THUNDERX_NODE, pci_resource_start(pdev, 0));
+
+	lmc->xbits = thunderx_get_num_lmcs(lmc->node) >> 1;
+	lmc->bank_width = (FIELD_GET(LMC_DDR_PLL_CTL_DDR4, lmc_ddr_pll_ctl) &&
+			   FIELD_GET(LMC_CONFIG_BG2, lmc_config)) ? 4 : 3;
+
+	lmc->pbank_lsb = (lmc_config >> 5) & 0xf;
+	lmc->dimm_lsb  = 28 + lmc->pbank_lsb + lmc->xbits;
+	lmc->rank_lsb = lmc->dimm_lsb;
+	lmc->rank_lsb -= FIELD_GET(LMC_CONFIG_RANK_ENA, lmc_config) ? 1 : 0;
+	lmc->bank_lsb = 7 + lmc->xbits;
+	lmc->row_lsb = 14 + LMC_CONFIG_ROW_LSB(lmc_config) + lmc->xbits;
+
+	lmc->col_hi_lsb = lmc->bank_lsb + lmc->bank_width;
+
+	lmc->xor_bank = lmc_control & LMC_CONTROL_XOR_BANK;
+
+	l2c_ioaddr = ioremap(L2C_CTL | FIELD_PREP(THUNDERX_NODE, lmc->node), PAGE_SIZE);
+	if (!l2c_ioaddr) {
+		dev_err(&pdev->dev, "Cannot map L2C_CTL\n");
+		ret = -ENOMEM;
+		goto err_free;
+	}
+
+	lmc->l2c_alias = !(readq(l2c_ioaddr) & L2C_CTL_DISIDXALIAS);
+
+	iounmap(l2c_ioaddr);
+
+	ret = edac_mc_add_mc(mci);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot add the MC: %d\n", ret);
+		goto err_free;
+	}
+
+	lmc_int = readq(lmc->regs + LMC_INT);
+	writeq(lmc_int, lmc->regs + LMC_INT);
+
+	writeq(LMC_INT_ENA_ALL, lmc->regs + LMC_INT_ENA_W1S);
+
+	if (IS_ENABLED(CONFIG_EDAC_DEBUG)) {
+		ret = thunderx_create_debugfs_nodes(mci->debugfs,
+						    lmc_dfs_ents,
+						    lmc,
+						    ARRAY_SIZE(lmc_dfs_ents));
+
+		if (ret != ARRAY_SIZE(lmc_dfs_ents)) {
+			dev_warn(&pdev->dev, "Error creating debugfs entries: %d%s\n",
+				 ret, ret >= 0 ? " created" : "");
+		}
+	}
+
+	return 0;
+
+err_free:
+	pci_set_drvdata(pdev, NULL);
+	edac_mc_free(mci);
+
+	return ret;
+}
+
+static void thunderx_lmc_remove(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci = pci_get_drvdata(pdev);
+	struct thunderx_lmc *lmc = mci->pvt_info;
+
+	writeq(LMC_INT_ENA_ALL, lmc->regs + LMC_INT_ENA_W1C);
+
+	edac_mc_del_mc(&pdev->dev);
+	edac_mc_free(mci);
+}
+
+MODULE_DEVICE_TABLE(pci, thunderx_lmc_pci_tbl);
+
+static struct pci_driver thunderx_lmc_driver = {
+	.name     = "thunderx_lmc_edac",
+	.probe    = thunderx_lmc_probe,
+	.remove   = thunderx_lmc_remove,
+	.id_table = thunderx_lmc_pci_tbl,
+};
+
+/*---------------------- OCX driver ---------------------------------*/
+
+#define PCI_DEVICE_ID_THUNDER_OCX 0xa013
+
+#define OCX_LINK_INTS		3
+#define OCX_INTS		(OCX_LINK_INTS + 1)
+#define OCX_RX_LANES		24
+#define OCX_RX_LANE_STATS	15
+
+#define OCX_COM_INT		0x100
+#define OCX_COM_INT_W1S		0x108
+#define OCX_COM_INT_ENA_W1S	0x110
+#define OCX_COM_INT_ENA_W1C	0x118
+
+#define OCX_COM_IO_BADID		BIT(54)
+#define OCX_COM_MEM_BADID		BIT(53)
+#define OCX_COM_COPR_BADID		BIT(52)
+#define OCX_COM_WIN_REQ_BADID		BIT(51)
+#define OCX_COM_WIN_REQ_TOUT		BIT(50)
+#define OCX_COM_RX_LANE			GENMASK(23, 0)
+
+#define OCX_COM_INT_CE			(OCX_COM_IO_BADID      | \
+					 OCX_COM_MEM_BADID     | \
+					 OCX_COM_COPR_BADID    | \
+					 OCX_COM_WIN_REQ_BADID | \
+					 OCX_COM_WIN_REQ_TOUT)
+
+static const struct error_descr ocx_com_errors[] = {
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = OCX_COM_IO_BADID,
+		.descr = "Invalid IO transaction node ID",
+	},
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = OCX_COM_MEM_BADID,
+		.descr = "Invalid memory transaction node ID",
+	},
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = OCX_COM_COPR_BADID,
+		.descr = "Invalid coprocessor transaction node ID",
+	},
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = OCX_COM_WIN_REQ_BADID,
+		.descr = "Invalid SLI transaction node ID",
+	},
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = OCX_COM_WIN_REQ_TOUT,
+		.descr = "Window/core request timeout",
+	},
+	{0, 0, NULL},
+};
+
+#define OCX_COM_LINKX_INT(x)		(0x120 + (x) * 8)
+#define OCX_COM_LINKX_INT_W1S(x)	(0x140 + (x) * 8)
+#define OCX_COM_LINKX_INT_ENA_W1S(x)	(0x160 + (x) * 8)
+#define OCX_COM_LINKX_INT_ENA_W1C(x)	(0x180 + (x) * 8)
+
+#define OCX_COM_LINK_BAD_WORD			BIT(13)
+#define OCX_COM_LINK_ALIGN_FAIL			BIT(12)
+#define OCX_COM_LINK_ALIGN_DONE			BIT(11)
+#define OCX_COM_LINK_UP				BIT(10)
+#define OCX_COM_LINK_STOP			BIT(9)
+#define OCX_COM_LINK_BLK_ERR			BIT(8)
+#define OCX_COM_LINK_REINIT			BIT(7)
+#define OCX_COM_LINK_LNK_DATA			BIT(6)
+#define OCX_COM_LINK_RXFIFO_DBE			BIT(5)
+#define OCX_COM_LINK_RXFIFO_SBE			BIT(4)
+#define OCX_COM_LINK_TXFIFO_DBE			BIT(3)
+#define OCX_COM_LINK_TXFIFO_SBE			BIT(2)
+#define OCX_COM_LINK_REPLAY_DBE			BIT(1)
+#define OCX_COM_LINK_REPLAY_SBE			BIT(0)
+
+static const struct error_descr ocx_com_link_errors[] = {
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = OCX_COM_LINK_REPLAY_SBE,
+		.descr = "Replay buffer single-bit error",
+	},
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = OCX_COM_LINK_TXFIFO_SBE,
+		.descr = "TX FIFO single-bit error",
+	},
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = OCX_COM_LINK_RXFIFO_SBE,
+		.descr = "RX FIFO single-bit error",
+	},
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = OCX_COM_LINK_BLK_ERR,
+		.descr = "Block code error",
+	},
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = OCX_COM_LINK_ALIGN_FAIL,
+		.descr = "Link alignment failure",
+	},
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = OCX_COM_LINK_BAD_WORD,
+		.descr = "Bad code word",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = OCX_COM_LINK_REPLAY_DBE,
+		.descr = "Replay buffer double-bit error",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = OCX_COM_LINK_TXFIFO_DBE,
+		.descr = "TX FIFO double-bit error",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = OCX_COM_LINK_RXFIFO_DBE,
+		.descr = "RX FIFO double-bit error",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = OCX_COM_LINK_STOP,
+		.descr = "Link stopped",
+	},
+	{0, 0, NULL},
+};
+
+#define OCX_COM_LINK_INT_UE       (OCX_COM_LINK_REPLAY_DBE | \
+				   OCX_COM_LINK_TXFIFO_DBE | \
+				   OCX_COM_LINK_RXFIFO_DBE | \
+				   OCX_COM_LINK_STOP)
+
+#define OCX_COM_LINK_INT_CE       (OCX_COM_LINK_REPLAY_SBE | \
+				   OCX_COM_LINK_TXFIFO_SBE | \
+				   OCX_COM_LINK_RXFIFO_SBE | \
+				   OCX_COM_LINK_BLK_ERR    | \
+				   OCX_COM_LINK_ALIGN_FAIL | \
+				   OCX_COM_LINK_BAD_WORD)
+
+#define OCX_LNE_INT(x)			(0x8018 + (x) * 0x100)
+#define OCX_LNE_INT_EN(x)		(0x8020 + (x) * 0x100)
+#define OCX_LNE_BAD_CNT(x)		(0x8028 + (x) * 0x100)
+#define OCX_LNE_CFG(x)			(0x8000 + (x) * 0x100)
+#define OCX_LNE_STAT(x, y)		(0x8040 + (x) * 0x100 + (y) * 8)
+
+#define OCX_LNE_CFG_RX_BDRY_LOCK_DIS		BIT(8)
+#define OCX_LNE_CFG_RX_STAT_WRAP_DIS		BIT(2)
+#define OCX_LNE_CFG_RX_STAT_RDCLR		BIT(1)
+#define OCX_LNE_CFG_RX_STAT_ENA			BIT(0)
+
+
+#define OCX_LANE_BAD_64B67B			BIT(8)
+#define OCX_LANE_DSKEW_FIFO_OVFL		BIT(5)
+#define OCX_LANE_SCRM_SYNC_LOSS			BIT(4)
+#define OCX_LANE_UKWN_CNTL_WORD			BIT(3)
+#define OCX_LANE_CRC32_ERR			BIT(2)
+#define OCX_LANE_BDRY_SYNC_LOSS			BIT(1)
+#define OCX_LANE_SERDES_LOCK_LOSS		BIT(0)
+
+#define OCX_COM_LANE_INT_UE       (0)
+#define OCX_COM_LANE_INT_CE       (OCX_LANE_SERDES_LOCK_LOSS | \
+				   OCX_LANE_BDRY_SYNC_LOSS   | \
+				   OCX_LANE_CRC32_ERR        | \
+				   OCX_LANE_UKWN_CNTL_WORD   | \
+				   OCX_LANE_SCRM_SYNC_LOSS   | \
+				   OCX_LANE_DSKEW_FIFO_OVFL  | \
+				   OCX_LANE_BAD_64B67B)
+
+static const struct error_descr ocx_lane_errors[] = {
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = OCX_LANE_SERDES_LOCK_LOSS,
+		.descr = "RX SerDes lock lost",
+	},
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = OCX_LANE_BDRY_SYNC_LOSS,
+		.descr = "RX word boundary lost",
+	},
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = OCX_LANE_CRC32_ERR,
+		.descr = "CRC32 error",
+	},
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = OCX_LANE_UKWN_CNTL_WORD,
+		.descr = "Unknown control word",
+	},
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = OCX_LANE_SCRM_SYNC_LOSS,
+		.descr = "Scrambler synchronization lost",
+	},
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = OCX_LANE_DSKEW_FIFO_OVFL,
+		.descr = "RX deskew FIFO overflow",
+	},
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = OCX_LANE_BAD_64B67B,
+		.descr = "Bad 64B/67B codeword",
+	},
+	{0, 0, NULL},
+};
+
+#define OCX_LNE_INT_ENA_ALL		(GENMASK(9, 8) | GENMASK(6, 0))
+#define OCX_COM_INT_ENA_ALL		(GENMASK(54, 50) | GENMASK(23, 0))
+#define OCX_COM_LINKX_INT_ENA_ALL	(GENMASK(13, 12) | \
+					 GENMASK(9, 7) | GENMASK(5, 0))
+
+#define OCX_TLKX_ECC_CTL(x)		(0x10018 + (x) * 0x2000)
+#define OCX_RLKX_ECC_CTL(x)		(0x18018 + (x) * 0x2000)
+
+struct ocx_com_err_ctx {
+	u64 reg_com_int;
+	u64 reg_lane_int[OCX_RX_LANES];
+	u64 reg_lane_stat11[OCX_RX_LANES];
+};
+
+struct ocx_link_err_ctx {
+	u64 reg_com_link_int;
+	int link;
+};
+
+struct thunderx_ocx {
+	void __iomem *regs;
+	int com_link;
+	struct pci_dev *pdev;
+	struct edac_device_ctl_info *edac_dev;
+
+	struct dentry *debugfs;
+	struct msix_entry msix_ent[OCX_INTS];
+
+	struct ocx_com_err_ctx com_err_ctx[RING_ENTRIES];
+	struct ocx_link_err_ctx link_err_ctx[RING_ENTRIES];
+
+	unsigned long com_ring_head;
+	unsigned long com_ring_tail;
+
+	unsigned long link_ring_head;
+	unsigned long link_ring_tail;
+};
+
+#define OCX_MESSAGE_SIZE	SZ_1K
+#define OCX_OTHER_SIZE		(50 * ARRAY_SIZE(ocx_com_link_errors))
+
+/* This handler is threaded */
+static irqreturn_t thunderx_ocx_com_isr(int irq, void *irq_id)
+{
+	struct msix_entry *msix = irq_id;
+	struct thunderx_ocx *ocx = container_of(msix, struct thunderx_ocx,
+						msix_ent[msix->entry]);
+
+	int lane;
+	unsigned long head = ring_pos(ocx->com_ring_head,
+				      ARRAY_SIZE(ocx->com_err_ctx));
+	struct ocx_com_err_ctx *ctx = &ocx->com_err_ctx[head];
+
+	ctx->reg_com_int = readq(ocx->regs + OCX_COM_INT);
+
+	for (lane = 0; lane < OCX_RX_LANES; lane++) {
+		ctx->reg_lane_int[lane] =
+			readq(ocx->regs + OCX_LNE_INT(lane));
+		ctx->reg_lane_stat11[lane] =
+			readq(ocx->regs + OCX_LNE_STAT(lane, 11));
+
+		writeq(ctx->reg_lane_int[lane], ocx->regs + OCX_LNE_INT(lane));
+	}
+
+	writeq(ctx->reg_com_int, ocx->regs + OCX_COM_INT);
+
+	ocx->com_ring_head++;
+
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t thunderx_ocx_com_threaded_isr(int irq, void *irq_id)
+{
+	struct msix_entry *msix = irq_id;
+	struct thunderx_ocx *ocx = container_of(msix, struct thunderx_ocx,
+						msix_ent[msix->entry]);
+
+	irqreturn_t ret = IRQ_NONE;
+
+	unsigned long tail;
+	struct ocx_com_err_ctx *ctx;
+	int lane;
+	char *msg;
+	char *other;
+
+	msg = kmalloc(OCX_MESSAGE_SIZE, GFP_KERNEL);
+	other = kmalloc(OCX_OTHER_SIZE, GFP_KERNEL);
+
+	if (!msg || !other)
+		goto err_free;
+
+	while (CIRC_CNT(ocx->com_ring_head, ocx->com_ring_tail,
+			ARRAY_SIZE(ocx->com_err_ctx))) {
+		tail = ring_pos(ocx->com_ring_tail,
+				ARRAY_SIZE(ocx->com_err_ctx));
+		ctx = &ocx->com_err_ctx[tail];
+
+		snprintf(msg, OCX_MESSAGE_SIZE, "%s: OCX_COM_INT: %016llx",
+			ocx->edac_dev->ctl_name, ctx->reg_com_int);
+
+		decode_register(other, OCX_OTHER_SIZE,
+				ocx_com_errors, ctx->reg_com_int);
+
+		strncat(msg, other, OCX_MESSAGE_SIZE);
+
+		for (lane = 0; lane < OCX_RX_LANES; lane++)
+			if (ctx->reg_com_int & BIT(lane)) {
+				snprintf(other, OCX_OTHER_SIZE,
+					 "\n\tOCX_LNE_INT[%02d]: %016llx OCX_LNE_STAT11[%02d]: %016llx",
+					 lane, ctx->reg_lane_int[lane],
+					 lane, ctx->reg_lane_stat11[lane]);
+
+				strncat(msg, other, OCX_MESSAGE_SIZE);
+
+				decode_register(other, OCX_OTHER_SIZE,
+						ocx_lane_errors,
+						ctx->reg_lane_int[lane]);
+				strncat(msg, other, OCX_MESSAGE_SIZE);
+			}
+
+		if (ctx->reg_com_int & OCX_COM_INT_CE)
+			edac_device_handle_ce(ocx->edac_dev, 0, 0, msg);
+
+		ocx->com_ring_tail++;
+	}
+
+	ret = IRQ_HANDLED;
+
+err_free:
+	kfree(other);
+	kfree(msg);
+
+	return ret;
+}
+
+static irqreturn_t thunderx_ocx_lnk_isr(int irq, void *irq_id)
+{
+	struct msix_entry *msix = irq_id;
+	struct thunderx_ocx *ocx = container_of(msix, struct thunderx_ocx,
+						msix_ent[msix->entry]);
+	unsigned long head = ring_pos(ocx->link_ring_head,
+				      ARRAY_SIZE(ocx->link_err_ctx));
+	struct ocx_link_err_ctx *ctx = &ocx->link_err_ctx[head];
+
+	ctx->link = msix->entry;
+	ctx->reg_com_link_int = readq(ocx->regs + OCX_COM_LINKX_INT(ctx->link));
+
+	writeq(ctx->reg_com_link_int, ocx->regs + OCX_COM_LINKX_INT(ctx->link));
+
+	ocx->link_ring_head++;
+
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t thunderx_ocx_lnk_threaded_isr(int irq, void *irq_id)
+{
+	struct msix_entry *msix = irq_id;
+	struct thunderx_ocx *ocx = container_of(msix, struct thunderx_ocx,
+						msix_ent[msix->entry]);
+	irqreturn_t ret = IRQ_NONE;
+	unsigned long tail;
+	struct ocx_link_err_ctx *ctx;
+
+	char *msg;
+	char *other;
+
+	msg = kmalloc(OCX_MESSAGE_SIZE, GFP_KERNEL);
+	other = kmalloc(OCX_OTHER_SIZE, GFP_KERNEL);
+
+	if (!msg || !other)
+		goto err_free;
+
+	while (CIRC_CNT(ocx->link_ring_head, ocx->link_ring_tail,
+			ARRAY_SIZE(ocx->link_err_ctx))) {
+		tail = ring_pos(ocx->link_ring_head,
+				ARRAY_SIZE(ocx->link_err_ctx));
+
+		ctx = &ocx->link_err_ctx[tail];
+
+		snprintf(msg, OCX_MESSAGE_SIZE,
+			 "%s: OCX_COM_LINK_INT[%d]: %016llx",
+			 ocx->edac_dev->ctl_name,
+			 ctx->link, ctx->reg_com_link_int);
+
+		decode_register(other, OCX_OTHER_SIZE,
+				ocx_com_link_errors, ctx->reg_com_link_int);
+
+		strncat(msg, other, OCX_MESSAGE_SIZE);
+
+		if (ctx->reg_com_link_int & OCX_COM_LINK_INT_UE)
+			edac_device_handle_ue(ocx->edac_dev, 0, 0, msg);
+		else if (ctx->reg_com_link_int & OCX_COM_LINK_INT_CE)
+			edac_device_handle_ce(ocx->edac_dev, 0, 0, msg);
+
+		ocx->link_ring_tail++;
+	}
+
+	ret = IRQ_HANDLED;
+err_free:
+	kfree(other);
+	kfree(msg);
+
+	return ret;
+}
+
+#define OCX_DEBUGFS_ATTR(_name, _reg)	DEBUGFS_REG_ATTR(ocx, _name, _reg)
+
+OCX_DEBUGFS_ATTR(tlk0_ecc_ctl, OCX_TLKX_ECC_CTL(0));
+OCX_DEBUGFS_ATTR(tlk1_ecc_ctl, OCX_TLKX_ECC_CTL(1));
+OCX_DEBUGFS_ATTR(tlk2_ecc_ctl, OCX_TLKX_ECC_CTL(2));
+
+OCX_DEBUGFS_ATTR(rlk0_ecc_ctl, OCX_RLKX_ECC_CTL(0));
+OCX_DEBUGFS_ATTR(rlk1_ecc_ctl, OCX_RLKX_ECC_CTL(1));
+OCX_DEBUGFS_ATTR(rlk2_ecc_ctl, OCX_RLKX_ECC_CTL(2));
+
+OCX_DEBUGFS_ATTR(com_link0_int, OCX_COM_LINKX_INT_W1S(0));
+OCX_DEBUGFS_ATTR(com_link1_int, OCX_COM_LINKX_INT_W1S(1));
+OCX_DEBUGFS_ATTR(com_link2_int, OCX_COM_LINKX_INT_W1S(2));
+
+OCX_DEBUGFS_ATTR(lne00_badcnt, OCX_LNE_BAD_CNT(0));
+OCX_DEBUGFS_ATTR(lne01_badcnt, OCX_LNE_BAD_CNT(1));
+OCX_DEBUGFS_ATTR(lne02_badcnt, OCX_LNE_BAD_CNT(2));
+OCX_DEBUGFS_ATTR(lne03_badcnt, OCX_LNE_BAD_CNT(3));
+OCX_DEBUGFS_ATTR(lne04_badcnt, OCX_LNE_BAD_CNT(4));
+OCX_DEBUGFS_ATTR(lne05_badcnt, OCX_LNE_BAD_CNT(5));
+OCX_DEBUGFS_ATTR(lne06_badcnt, OCX_LNE_BAD_CNT(6));
+OCX_DEBUGFS_ATTR(lne07_badcnt, OCX_LNE_BAD_CNT(7));
+
+OCX_DEBUGFS_ATTR(lne08_badcnt, OCX_LNE_BAD_CNT(8));
+OCX_DEBUGFS_ATTR(lne09_badcnt, OCX_LNE_BAD_CNT(9));
+OCX_DEBUGFS_ATTR(lne10_badcnt, OCX_LNE_BAD_CNT(10));
+OCX_DEBUGFS_ATTR(lne11_badcnt, OCX_LNE_BAD_CNT(11));
+OCX_DEBUGFS_ATTR(lne12_badcnt, OCX_LNE_BAD_CNT(12));
+OCX_DEBUGFS_ATTR(lne13_badcnt, OCX_LNE_BAD_CNT(13));
+OCX_DEBUGFS_ATTR(lne14_badcnt, OCX_LNE_BAD_CNT(14));
+OCX_DEBUGFS_ATTR(lne15_badcnt, OCX_LNE_BAD_CNT(15));
+
+OCX_DEBUGFS_ATTR(lne16_badcnt, OCX_LNE_BAD_CNT(16));
+OCX_DEBUGFS_ATTR(lne17_badcnt, OCX_LNE_BAD_CNT(17));
+OCX_DEBUGFS_ATTR(lne18_badcnt, OCX_LNE_BAD_CNT(18));
+OCX_DEBUGFS_ATTR(lne19_badcnt, OCX_LNE_BAD_CNT(19));
+OCX_DEBUGFS_ATTR(lne20_badcnt, OCX_LNE_BAD_CNT(20));
+OCX_DEBUGFS_ATTR(lne21_badcnt, OCX_LNE_BAD_CNT(21));
+OCX_DEBUGFS_ATTR(lne22_badcnt, OCX_LNE_BAD_CNT(22));
+OCX_DEBUGFS_ATTR(lne23_badcnt, OCX_LNE_BAD_CNT(23));
+
+OCX_DEBUGFS_ATTR(com_int, OCX_COM_INT_W1S);
+
+struct debugfs_entry *ocx_dfs_ents[] = {
+	&debugfs_tlk0_ecc_ctl,
+	&debugfs_tlk1_ecc_ctl,
+	&debugfs_tlk2_ecc_ctl,
+
+	&debugfs_rlk0_ecc_ctl,
+	&debugfs_rlk1_ecc_ctl,
+	&debugfs_rlk2_ecc_ctl,
+
+	&debugfs_com_link0_int,
+	&debugfs_com_link1_int,
+	&debugfs_com_link2_int,
+
+	&debugfs_lne00_badcnt,
+	&debugfs_lne01_badcnt,
+	&debugfs_lne02_badcnt,
+	&debugfs_lne03_badcnt,
+	&debugfs_lne04_badcnt,
+	&debugfs_lne05_badcnt,
+	&debugfs_lne06_badcnt,
+	&debugfs_lne07_badcnt,
+	&debugfs_lne08_badcnt,
+	&debugfs_lne09_badcnt,
+	&debugfs_lne10_badcnt,
+	&debugfs_lne11_badcnt,
+	&debugfs_lne12_badcnt,
+	&debugfs_lne13_badcnt,
+	&debugfs_lne14_badcnt,
+	&debugfs_lne15_badcnt,
+	&debugfs_lne16_badcnt,
+	&debugfs_lne17_badcnt,
+	&debugfs_lne18_badcnt,
+	&debugfs_lne19_badcnt,
+	&debugfs_lne20_badcnt,
+	&debugfs_lne21_badcnt,
+	&debugfs_lne22_badcnt,
+	&debugfs_lne23_badcnt,
+
+	&debugfs_com_int,
+};
+
+static const struct pci_device_id thunderx_ocx_pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_OCX) },
+	{ 0, },
+};
+
+static void thunderx_ocx_clearstats(struct thunderx_ocx *ocx)
+{
+	int lane, stat, cfg;
+
+	for (lane = 0; lane < OCX_RX_LANES; lane++) {
+		cfg = readq(ocx->regs + OCX_LNE_CFG(lane));
+		cfg |= OCX_LNE_CFG_RX_STAT_RDCLR;
+		cfg &= ~OCX_LNE_CFG_RX_STAT_ENA;
+		writeq(cfg, ocx->regs + OCX_LNE_CFG(lane));
+
+		for (stat = 0; stat < OCX_RX_LANE_STATS; stat++)
+			readq(ocx->regs + OCX_LNE_STAT(lane, stat));
+	}
+}
+
+static int thunderx_ocx_probe(struct pci_dev *pdev,
+			      const struct pci_device_id *id)
+{
+	struct thunderx_ocx *ocx;
+	struct edac_device_ctl_info *edac_dev;
+	char name[32];
+	int idx;
+	int i;
+	int ret;
+	u64 reg;
+
+	ret = pcim_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot enable PCI device: %d\n", ret);
+		return ret;
+	}
+
+	ret = pcim_iomap_regions(pdev, BIT(0), "thunderx_ocx");
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot map PCI resources: %d\n", ret);
+		return ret;
+	}
+
+	idx = edac_device_alloc_index();
+	snprintf(name, sizeof(name), "OCX%d", idx);
+	edac_dev = edac_device_alloc_ctl_info(sizeof(struct thunderx_ocx),
+					      name, 1, "CCPI", 1,
+					      0, NULL, 0, idx);
+	if (!edac_dev) {
+		dev_err(&pdev->dev, "Cannot allocate EDAC device: %d\n", ret);
+		return -ENOMEM;
+	}
+	ocx = edac_dev->pvt_info;
+	ocx->edac_dev = edac_dev;
+	ocx->com_ring_head = 0;
+	ocx->com_ring_tail = 0;
+	ocx->link_ring_head = 0;
+	ocx->link_ring_tail = 0;
+
+	ocx->regs = pcim_iomap_table(pdev)[0];
+	if (!ocx->regs) {
+		dev_err(&pdev->dev, "Cannot map PCI resources: %d\n", ret);
+		ret = -ENODEV;
+		goto err_free;
+	}
+
+	ocx->pdev = pdev;
+
+	for (i = 0; i < OCX_INTS; i++) {
+		ocx->msix_ent[i].entry = i;
+		ocx->msix_ent[i].vector = 0;
+	}
+
+	ret = pci_enable_msix_exact(pdev, ocx->msix_ent, OCX_INTS);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot enable interrupt: %d\n", ret);
+		goto err_free;
+	}
+
+	for (i = 0; i < OCX_INTS; i++) {
+		ret = devm_request_threaded_irq(&pdev->dev,
+						ocx->msix_ent[i].vector,
+						(i == 3) ?
+						 thunderx_ocx_com_isr :
+						 thunderx_ocx_lnk_isr,
+						(i == 3) ?
+						 thunderx_ocx_com_threaded_isr :
+						 thunderx_ocx_lnk_threaded_isr,
+						0, "[EDAC] ThunderX OCX",
+						&ocx->msix_ent[i]);
+		if (ret)
+			goto err_free;
+	}
+
+	edac_dev->dev = &pdev->dev;
+	edac_dev->dev_name = dev_name(&pdev->dev);
+	edac_dev->mod_name = "thunderx-ocx";
+	edac_dev->ctl_name = "thunderx-ocx";
+
+	ret = edac_device_add_device(edac_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot add EDAC device: %d\n", ret);
+		goto err_free;
+	}
+
+	if (IS_ENABLED(CONFIG_EDAC_DEBUG)) {
+		ocx->debugfs = edac_debugfs_create_dir(pdev->dev.kobj.name);
+
+		ret = thunderx_create_debugfs_nodes(ocx->debugfs,
+						    ocx_dfs_ents,
+						    ocx,
+						    ARRAY_SIZE(ocx_dfs_ents));
+		if (ret != ARRAY_SIZE(ocx_dfs_ents)) {
+			dev_warn(&pdev->dev, "Error creating debugfs entries: %d%s\n",
+				 ret, ret >= 0 ? " created" : "");
+		}
+	}
+
+	pci_set_drvdata(pdev, edac_dev);
+
+	thunderx_ocx_clearstats(ocx);
+
+	for (i = 0; i < OCX_RX_LANES; i++) {
+		writeq(OCX_LNE_INT_ENA_ALL,
+		       ocx->regs + OCX_LNE_INT_EN(i));
+
+		reg = readq(ocx->regs + OCX_LNE_INT(i));
+		writeq(reg, ocx->regs + OCX_LNE_INT(i));
+
+	}
+
+	for (i = 0; i < OCX_LINK_INTS; i++) {
+		reg = readq(ocx->regs + OCX_COM_LINKX_INT(i));
+		writeq(reg, ocx->regs + OCX_COM_LINKX_INT(i));
+
+		writeq(OCX_COM_LINKX_INT_ENA_ALL,
+		       ocx->regs + OCX_COM_LINKX_INT_ENA_W1S(i));
+	}
+
+	reg = readq(ocx->regs + OCX_COM_INT);
+	writeq(reg, ocx->regs + OCX_COM_INT);
+
+	writeq(OCX_COM_INT_ENA_ALL, ocx->regs + OCX_COM_INT_ENA_W1S);
+
+	return 0;
+err_free:
+	edac_device_free_ctl_info(edac_dev);
+
+	return ret;
+}
+
+static void thunderx_ocx_remove(struct pci_dev *pdev)
+{
+	struct edac_device_ctl_info *edac_dev = pci_get_drvdata(pdev);
+	struct thunderx_ocx *ocx = edac_dev->pvt_info;
+	int i;
+
+	writeq(OCX_COM_INT_ENA_ALL, ocx->regs + OCX_COM_INT_ENA_W1C);
+
+	for (i = 0; i < OCX_INTS; i++) {
+		writeq(OCX_COM_LINKX_INT_ENA_ALL,
+		       ocx->regs + OCX_COM_LINKX_INT_ENA_W1C(i));
+	}
+
+	edac_debugfs_remove_recursive(ocx->debugfs);
+
+	edac_device_del_device(&pdev->dev);
+	edac_device_free_ctl_info(edac_dev);
+}
+
+MODULE_DEVICE_TABLE(pci, thunderx_ocx_pci_tbl);
+
+static struct pci_driver thunderx_ocx_driver = {
+	.name     = "thunderx_ocx_edac",
+	.probe    = thunderx_ocx_probe,
+	.remove   = thunderx_ocx_remove,
+	.id_table = thunderx_ocx_pci_tbl,
+};
+
+/*---------------------- L2C driver ---------------------------------*/
+
+#define PCI_DEVICE_ID_THUNDER_L2C_TAD 0xa02e
+#define PCI_DEVICE_ID_THUNDER_L2C_CBC 0xa02f
+#define PCI_DEVICE_ID_THUNDER_L2C_MCI 0xa030
+
+#define L2C_TAD_INT_W1C		0x40000
+#define L2C_TAD_INT_W1S		0x40008
+
+#define L2C_TAD_INT_ENA_W1C	0x40020
+#define L2C_TAD_INT_ENA_W1S	0x40028
+
+
+#define L2C_TAD_INT_L2DDBE	 BIT(1)
+#define L2C_TAD_INT_SBFSBE	 BIT(2)
+#define L2C_TAD_INT_SBFDBE	 BIT(3)
+#define L2C_TAD_INT_FBFSBE	 BIT(4)
+#define L2C_TAD_INT_FBFDBE	 BIT(5)
+#define L2C_TAD_INT_TAGDBE	 BIT(9)
+#define L2C_TAD_INT_RDDISLMC	 BIT(15)
+#define L2C_TAD_INT_WRDISLMC	 BIT(16)
+#define L2C_TAD_INT_LFBTO	 BIT(17)
+#define L2C_TAD_INT_GSYNCTO	 BIT(18)
+#define L2C_TAD_INT_RTGSBE	 BIT(32)
+#define L2C_TAD_INT_RTGDBE	 BIT(33)
+#define L2C_TAD_INT_RDDISOCI	 BIT(34)
+#define L2C_TAD_INT_WRDISOCI	 BIT(35)
+
+#define L2C_TAD_INT_ECC		(L2C_TAD_INT_L2DDBE | \
+				 L2C_TAD_INT_SBFSBE | L2C_TAD_INT_SBFDBE | \
+				 L2C_TAD_INT_FBFSBE | L2C_TAD_INT_FBFDBE)
+
+#define L2C_TAD_INT_CE          (L2C_TAD_INT_SBFSBE | \
+				 L2C_TAD_INT_FBFSBE)
+
+#define L2C_TAD_INT_UE          (L2C_TAD_INT_L2DDBE | \
+				 L2C_TAD_INT_SBFDBE | \
+				 L2C_TAD_INT_FBFDBE | \
+				 L2C_TAD_INT_TAGDBE | \
+				 L2C_TAD_INT_RTGDBE | \
+				 L2C_TAD_INT_WRDISOCI | \
+				 L2C_TAD_INT_RDDISOCI | \
+				 L2C_TAD_INT_WRDISLMC | \
+				 L2C_TAD_INT_RDDISLMC | \
+				 L2C_TAD_INT_LFBTO    | \
+				 L2C_TAD_INT_GSYNCTO)
+
+static const struct error_descr l2_tad_errors[] = {
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = L2C_TAD_INT_SBFSBE,
+		.descr = "SBF single-bit error",
+	},
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = L2C_TAD_INT_FBFSBE,
+		.descr = "FBF single-bit error",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = L2C_TAD_INT_L2DDBE,
+		.descr = "L2D double-bit error",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = L2C_TAD_INT_SBFDBE,
+		.descr = "SBF double-bit error",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = L2C_TAD_INT_FBFDBE,
+		.descr = "FBF double-bit error",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = L2C_TAD_INT_TAGDBE,
+		.descr = "TAG double-bit error",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = L2C_TAD_INT_RTGDBE,
+		.descr = "RTG double-bit error",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = L2C_TAD_INT_WRDISOCI,
+		.descr = "Write to a disabled CCPI",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = L2C_TAD_INT_RDDISOCI,
+		.descr = "Read from a disabled CCPI",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = L2C_TAD_INT_WRDISLMC,
+		.descr = "Write to a disabled LMC",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = L2C_TAD_INT_RDDISLMC,
+		.descr = "Read from a disabled LMC",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = L2C_TAD_INT_LFBTO,
+		.descr = "LFB entry timeout",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = L2C_TAD_INT_GSYNCTO,
+		.descr = "Global sync CCPI timeout",
+	},
+	{0, 0, NULL},
+};
+
+#define L2C_TAD_INT_TAG		(L2C_TAD_INT_TAGDBE)
+
+#define L2C_TAD_INT_RTG		(L2C_TAD_INT_RTGDBE)
+
+#define L2C_TAD_INT_DISLMC	(L2C_TAD_INT_WRDISLMC | L2C_TAD_INT_RDDISLMC)
+
+#define L2C_TAD_INT_DISOCI	(L2C_TAD_INT_WRDISOCI | L2C_TAD_INT_RDDISOCI)
+
+#define L2C_TAD_INT_ENA_ALL	(L2C_TAD_INT_ECC | L2C_TAD_INT_TAG | \
+				 L2C_TAD_INT_RTG | \
+				 L2C_TAD_INT_DISLMC | L2C_TAD_INT_DISOCI | \
+				 L2C_TAD_INT_LFBTO)
+
+#define L2C_TAD_TIMETWO		0x50000
+#define L2C_TAD_TIMEOUT		0x50100
+#define L2C_TAD_ERR		0x60000
+#define L2C_TAD_TQD_ERR		0x60100
+#define L2C_TAD_TTG_ERR		0x60200
+
+
+#define L2C_CBC_INT_W1C		0x60000
+
+#define L2C_CBC_INT_RSDSBE	 BIT(0)
+#define L2C_CBC_INT_RSDDBE	 BIT(1)
+
+#define L2C_CBC_INT_RSD		 (L2C_CBC_INT_RSDSBE | L2C_CBC_INT_RSDDBE)
+
+#define L2C_CBC_INT_MIBSBE	 BIT(4)
+#define L2C_CBC_INT_MIBDBE	 BIT(5)
+
+#define L2C_CBC_INT_MIB		 (L2C_CBC_INT_MIBSBE | L2C_CBC_INT_MIBDBE)
+
+#define L2C_CBC_INT_IORDDISOCI	 BIT(6)
+#define L2C_CBC_INT_IOWRDISOCI	 BIT(7)
+
+#define L2C_CBC_INT_IODISOCI	 (L2C_CBC_INT_IORDDISOCI | \
+				  L2C_CBC_INT_IOWRDISOCI)
+
+#define L2C_CBC_INT_CE		 (L2C_CBC_INT_RSDSBE | L2C_CBC_INT_MIBSBE)
+#define L2C_CBC_INT_UE		 (L2C_CBC_INT_RSDDBE | L2C_CBC_INT_MIBDBE)
+
+
+static const struct error_descr l2_cbc_errors[] = {
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = L2C_CBC_INT_RSDSBE,
+		.descr = "RSD single-bit error",
+	},
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = L2C_CBC_INT_MIBSBE,
+		.descr = "MIB single-bit error",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = L2C_CBC_INT_RSDDBE,
+		.descr = "RSD double-bit error",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = L2C_CBC_INT_MIBDBE,
+		.descr = "MIB double-bit error",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = L2C_CBC_INT_IORDDISOCI,
+		.descr = "Read from a disabled CCPI",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = L2C_CBC_INT_IOWRDISOCI,
+		.descr = "Write to a disabled CCPI",
+	},
+	{0, 0, NULL},
+};
+
+#define L2C_CBC_INT_W1S		0x60008
+#define L2C_CBC_INT_ENA_W1C	0x60020
+
+#define L2C_CBC_INT_ENA_ALL	 (L2C_CBC_INT_RSD | L2C_CBC_INT_MIB | \
+				  L2C_CBC_INT_IODISOCI)
+
+#define L2C_CBC_INT_ENA_W1S	0x60028
+
+#define L2C_CBC_IODISOCIERR	0x80008
+#define L2C_CBC_IOCERR		0x80010
+#define L2C_CBC_RSDERR		0x80018
+#define L2C_CBC_MIBERR		0x80020
+
+
+#define L2C_MCI_INT_W1C		0x0
+
+#define L2C_MCI_INT_VBFSBE	 BIT(0)
+#define L2C_MCI_INT_VBFDBE	 BIT(1)
+
+static const struct error_descr l2_mci_errors[] = {
+	{
+		.type  = ERR_CORRECTED,
+		.mask  = L2C_MCI_INT_VBFSBE,
+		.descr = "VBF single-bit error",
+	},
+	{
+		.type  = ERR_UNCORRECTED,
+		.mask  = L2C_MCI_INT_VBFDBE,
+		.descr = "VBF double-bit error",
+	},
+	{0, 0, NULL},
+};
+
+#define L2C_MCI_INT_W1S		0x8
+#define L2C_MCI_INT_ENA_W1C	0x20
+
+#define L2C_MCI_INT_ENA_ALL	 (L2C_MCI_INT_VBFSBE | L2C_MCI_INT_VBFDBE)
+
+#define L2C_MCI_INT_ENA_W1S	0x28
+
+#define L2C_MCI_ERR		0x10000
+
+#define L2C_MESSAGE_SIZE	SZ_1K
+#define L2C_OTHER_SIZE		(50 * ARRAY_SIZE(l2_tad_errors))
+
+struct l2c_err_ctx {
+	char *reg_ext_name;
+	u64  reg_int;
+	u64  reg_ext;
+};
+
+struct thunderx_l2c {
+	void __iomem *regs;
+	struct pci_dev *pdev;
+	struct edac_device_ctl_info *edac_dev;
+
+	struct dentry *debugfs;
+
+	int index;
+
+	struct msix_entry msix_ent;
+
+	struct l2c_err_ctx err_ctx[RING_ENTRIES];
+	unsigned long ring_head;
+	unsigned long ring_tail;
+};
+
+static irqreturn_t thunderx_l2c_tad_isr(int irq, void *irq_id)
+{
+	struct msix_entry *msix = irq_id;
+	struct thunderx_l2c *tad = container_of(msix, struct thunderx_l2c,
+						msix_ent);
+
+	unsigned long head = ring_pos(tad->ring_head, ARRAY_SIZE(tad->err_ctx));
+	struct l2c_err_ctx *ctx = &tad->err_ctx[head];
+
+	ctx->reg_int = readq(tad->regs + L2C_TAD_INT_W1C);
+
+	if (ctx->reg_int & L2C_TAD_INT_ECC) {
+		ctx->reg_ext_name = "TQD_ERR";
+		ctx->reg_ext = readq(tad->regs + L2C_TAD_TQD_ERR);
+	} else if (ctx->reg_int & L2C_TAD_INT_TAG) {
+		ctx->reg_ext_name = "TTG_ERR";
+		ctx->reg_ext = readq(tad->regs + L2C_TAD_TTG_ERR);
+	} else if (ctx->reg_int & L2C_TAD_INT_LFBTO) {
+		ctx->reg_ext_name = "TIMEOUT";
+		ctx->reg_ext = readq(tad->regs + L2C_TAD_TIMEOUT);
+	} else if (ctx->reg_int & L2C_TAD_INT_DISOCI) {
+		ctx->reg_ext_name = "ERR";
+		ctx->reg_ext = readq(tad->regs + L2C_TAD_ERR);
+	}
+
+	writeq(ctx->reg_int, tad->regs + L2C_TAD_INT_W1C);
+
+	tad->ring_head++;
+
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t thunderx_l2c_cbc_isr(int irq, void *irq_id)
+{
+	struct msix_entry *msix = irq_id;
+	struct thunderx_l2c *cbc = container_of(msix, struct thunderx_l2c,
+						msix_ent);
+
+	unsigned long head = ring_pos(cbc->ring_head, ARRAY_SIZE(cbc->err_ctx));
+	struct l2c_err_ctx *ctx = &cbc->err_ctx[head];
+
+	ctx->reg_int = readq(cbc->regs + L2C_CBC_INT_W1C);
+
+	if (ctx->reg_int & L2C_CBC_INT_RSD) {
+		ctx->reg_ext_name = "RSDERR";
+		ctx->reg_ext = readq(cbc->regs + L2C_CBC_RSDERR);
+	} else if (ctx->reg_int & L2C_CBC_INT_MIB) {
+		ctx->reg_ext_name = "MIBERR";
+		ctx->reg_ext = readq(cbc->regs + L2C_CBC_MIBERR);
+	} else if (ctx->reg_int & L2C_CBC_INT_IODISOCI) {
+		ctx->reg_ext_name = "IODISOCIERR";
+		ctx->reg_ext = readq(cbc->regs + L2C_CBC_IODISOCIERR);
+	}
+
+	writeq(ctx->reg_int, cbc->regs + L2C_CBC_INT_W1C);
+
+	cbc->ring_head++;
+
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t thunderx_l2c_mci_isr(int irq, void *irq_id)
+{
+	struct msix_entry *msix = irq_id;
+	struct thunderx_l2c *mci = container_of(msix, struct thunderx_l2c,
+						msix_ent);
+
+	unsigned long head = ring_pos(mci->ring_head, ARRAY_SIZE(mci->err_ctx));
+	struct l2c_err_ctx *ctx = &mci->err_ctx[head];
+
+	ctx->reg_int = readq(mci->regs + L2C_MCI_INT_W1C);
+	ctx->reg_ext = readq(mci->regs + L2C_MCI_ERR);
+
+	writeq(ctx->reg_int, mci->regs + L2C_MCI_INT_W1C);
+
+	ctx->reg_ext_name = "ERR";
+
+	mci->ring_head++;
+
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t thunderx_l2c_threaded_isr(int irq, void *irq_id)
+{
+	struct msix_entry *msix = irq_id;
+	struct thunderx_l2c *l2c = container_of(msix, struct thunderx_l2c,
+						msix_ent);
+
+	unsigned long tail = ring_pos(l2c->ring_tail, ARRAY_SIZE(l2c->err_ctx));
+	struct l2c_err_ctx *ctx = &l2c->err_ctx[tail];
+	irqreturn_t ret = IRQ_NONE;
+
+	u64 mask_ue, mask_ce;
+	const struct error_descr *l2_errors;
+	char *reg_int_name;
+
+	char *msg;
+	char *other;
+
+	msg = kmalloc(OCX_MESSAGE_SIZE, GFP_KERNEL);
+	other = kmalloc(OCX_OTHER_SIZE, GFP_KERNEL);
+
+	if (!msg || !other)
+		goto err_free;
+
+	switch (l2c->pdev->device) {
+	case PCI_DEVICE_ID_THUNDER_L2C_TAD:
+		reg_int_name = "L2C_TAD_INT";
+		mask_ue = L2C_TAD_INT_UE;
+		mask_ce = L2C_TAD_INT_CE;
+		l2_errors = l2_tad_errors;
+		break;
+	case PCI_DEVICE_ID_THUNDER_L2C_CBC:
+		reg_int_name = "L2C_CBC_INT";
+		mask_ue = L2C_CBC_INT_UE;
+		mask_ce = L2C_CBC_INT_CE;
+		l2_errors = l2_cbc_errors;
+		break;
+	case PCI_DEVICE_ID_THUNDER_L2C_MCI:
+		reg_int_name = "L2C_MCI_INT";
+		mask_ue = L2C_MCI_INT_VBFDBE;
+		mask_ce = L2C_MCI_INT_VBFSBE;
+		l2_errors = l2_mci_errors;
+		break;
+	default:
+		dev_err(&l2c->pdev->dev, "Unsupported device: %04x\n",
+			l2c->pdev->device);
+		goto err_free;
+	}
+
+	while (CIRC_CNT(l2c->ring_head, l2c->ring_tail,
+			ARRAY_SIZE(l2c->err_ctx))) {
+		snprintf(msg, L2C_MESSAGE_SIZE,
+			 "%s: %s: %016llx, %s: %016llx",
+			 l2c->edac_dev->ctl_name, reg_int_name, ctx->reg_int,
+			 ctx->reg_ext_name, ctx->reg_ext);
+
+		decode_register(other, L2C_OTHER_SIZE, l2_errors, ctx->reg_int);
+
+		strncat(msg, other, L2C_MESSAGE_SIZE);
+
+		if (ctx->reg_int & mask_ue)
+			edac_device_handle_ue(l2c->edac_dev, 0, 0, msg);
+		else if (ctx->reg_int & mask_ce)
+			edac_device_handle_ce(l2c->edac_dev, 0, 0, msg);
+
+		l2c->ring_tail++;
+	}
+
+	ret = IRQ_HANDLED;
+
+err_free:
+	kfree(other);
+	kfree(msg);
+
+	return ret;
+}
+
+#define L2C_DEBUGFS_ATTR(_name, _reg)	DEBUGFS_REG_ATTR(l2c, _name, _reg)
+
+L2C_DEBUGFS_ATTR(tad_int, L2C_TAD_INT_W1S);
+
+struct debugfs_entry *l2c_tad_dfs_ents[] = {
+	&debugfs_tad_int,
+};
+
+L2C_DEBUGFS_ATTR(cbc_int, L2C_CBC_INT_W1S);
+
+struct debugfs_entry *l2c_cbc_dfs_ents[] = {
+	&debugfs_cbc_int,
+};
+
+L2C_DEBUGFS_ATTR(mci_int, L2C_MCI_INT_W1S);
+
+struct debugfs_entry *l2c_mci_dfs_ents[] = {
+	&debugfs_mci_int,
+};
+
+static const struct pci_device_id thunderx_l2c_pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_L2C_TAD), },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_L2C_CBC), },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_L2C_MCI), },
+	{ 0, },
+};
+
+static int thunderx_l2c_probe(struct pci_dev *pdev,
+			      const struct pci_device_id *id)
+{
+	struct thunderx_l2c *l2c;
+	struct edac_device_ctl_info *edac_dev;
+	struct debugfs_entry **l2c_devattr;
+	size_t dfs_entries;
+	irqreturn_t (*thunderx_l2c_isr)(int, void *) = NULL;
+	char name[32];
+	const char *fmt;
+	u64 reg_en_offs, reg_en_mask;
+	int idx;
+	int ret;
+
+	ret = pcim_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot enable PCI device: %d\n", ret);
+		return ret;
+	}
+
+	ret = pcim_iomap_regions(pdev, BIT(0), "thunderx_l2c");
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot map PCI resources: %d\n", ret);
+		return ret;
+	}
+
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_THUNDER_L2C_TAD:
+		thunderx_l2c_isr = thunderx_l2c_tad_isr;
+		l2c_devattr = l2c_tad_dfs_ents;
+		dfs_entries = ARRAY_SIZE(l2c_tad_dfs_ents);
+		fmt = "L2C-TAD%d";
+		reg_en_offs = L2C_TAD_INT_ENA_W1S;
+		reg_en_mask = L2C_TAD_INT_ENA_ALL;
+		break;
+	case PCI_DEVICE_ID_THUNDER_L2C_CBC:
+		thunderx_l2c_isr = thunderx_l2c_cbc_isr;
+		l2c_devattr = l2c_cbc_dfs_ents;
+		dfs_entries = ARRAY_SIZE(l2c_cbc_dfs_ents);
+		fmt = "L2C-CBC%d";
+		reg_en_offs = L2C_CBC_INT_ENA_W1S;
+		reg_en_mask = L2C_CBC_INT_ENA_ALL;
+		break;
+	case PCI_DEVICE_ID_THUNDER_L2C_MCI:
+		thunderx_l2c_isr = thunderx_l2c_mci_isr;
+		l2c_devattr = l2c_mci_dfs_ents;
+		dfs_entries = ARRAY_SIZE(l2c_mci_dfs_ents);
+		fmt = "L2C-MCI%d";
+		reg_en_offs = L2C_MCI_INT_ENA_W1S;
+		reg_en_mask = L2C_MCI_INT_ENA_ALL;
+		break;
+	default:
+		//Should never ever get here
+		dev_err(&pdev->dev, "Unsupported PCI device: %04x\n",
+			pdev->device);
+		return -EINVAL;
+	}
+
+	idx = edac_device_alloc_index();
+	snprintf(name, sizeof(name), fmt, idx);
+
+	edac_dev = edac_device_alloc_ctl_info(sizeof(struct thunderx_l2c),
+					      name, 1, "L2C", 1, 0,
+					      NULL, 0, idx);
+	if (!edac_dev) {
+		dev_err(&pdev->dev, "Cannot allocate EDAC device\n");
+		return -ENOMEM;
+	}
+
+	l2c = edac_dev->pvt_info;
+	l2c->edac_dev = edac_dev;
+
+	l2c->regs = pcim_iomap_table(pdev)[0];
+	if (!l2c->regs) {
+		dev_err(&pdev->dev, "Cannot map PCI resources\n");
+		ret = -ENODEV;
+		goto err_free;
+	}
+
+	l2c->pdev = pdev;
+
+	l2c->ring_head = 0;
+	l2c->ring_tail = 0;
+
+	l2c->msix_ent.entry = 0;
+	l2c->msix_ent.vector = 0;
+
+	ret = pci_enable_msix_exact(pdev, &l2c->msix_ent, 1);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot enable interrupt: %d\n", ret);
+		goto err_free;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, l2c->msix_ent.vector,
+					thunderx_l2c_isr,
+					thunderx_l2c_threaded_isr,
+					0, "[EDAC] ThunderX L2C",
+					&l2c->msix_ent);
+	if (ret)
+		goto err_free;
+
+	edac_dev->dev = &pdev->dev;
+	edac_dev->dev_name = dev_name(&pdev->dev);
+	edac_dev->mod_name = "thunderx-l2c";
+	edac_dev->ctl_name = "thunderx-l2c";
+
+	ret = edac_device_add_device(edac_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot add EDAC device: %d\n", ret);
+		goto err_free;
+	}
+
+	if (IS_ENABLED(CONFIG_EDAC_DEBUG)) {
+		l2c->debugfs = edac_debugfs_create_dir(pdev->dev.kobj.name);
+
+		ret = thunderx_create_debugfs_nodes(l2c->debugfs, l2c_devattr,
+					      l2c, dfs_entries);
+
+		if (ret != dfs_entries) {
+			dev_warn(&pdev->dev, "Error creating debugfs entries: %d%s\n",
+				 ret, ret >= 0 ? " created" : "");
+		}
+	}
+
+	pci_set_drvdata(pdev, edac_dev);
+
+	writeq(reg_en_mask, l2c->regs + reg_en_offs);
+
+	return 0;
+
+err_free:
+	edac_device_free_ctl_info(edac_dev);
+
+	return ret;
+}
+
+static void thunderx_l2c_remove(struct pci_dev *pdev)
+{
+	struct edac_device_ctl_info *edac_dev = pci_get_drvdata(pdev);
+	struct thunderx_l2c *l2c = edac_dev->pvt_info;
+
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_THUNDER_L2C_TAD:
+		writeq(L2C_TAD_INT_ENA_ALL, l2c->regs + L2C_TAD_INT_ENA_W1C);
+		break;
+	case PCI_DEVICE_ID_THUNDER_L2C_CBC:
+		writeq(L2C_CBC_INT_ENA_ALL, l2c->regs + L2C_CBC_INT_ENA_W1C);
+		break;
+	case PCI_DEVICE_ID_THUNDER_L2C_MCI:
+		writeq(L2C_MCI_INT_ENA_ALL, l2c->regs + L2C_MCI_INT_ENA_W1C);
+		break;
+	}
+
+	edac_debugfs_remove_recursive(l2c->debugfs);
+
+	edac_device_del_device(&pdev->dev);
+	edac_device_free_ctl_info(edac_dev);
+}
+
+MODULE_DEVICE_TABLE(pci, thunderx_l2c_pci_tbl);
+
+static struct pci_driver thunderx_l2c_driver = {
+	.name     = "thunderx_l2c_edac",
+	.probe    = thunderx_l2c_probe,
+	.remove   = thunderx_l2c_remove,
+	.id_table = thunderx_l2c_pci_tbl,
+};
+
+static int __init thunderx_edac_init(void)
+{
+	int rc = 0;
+
+	rc = pci_register_driver(&thunderx_lmc_driver);
+	if (rc)
+		return rc;
+
+	rc = pci_register_driver(&thunderx_ocx_driver);
+	if (rc)
+		goto err_lmc;
+
+	rc = pci_register_driver(&thunderx_l2c_driver);
+	if (rc)
+		goto err_ocx;
+
+	return rc;
+err_ocx:
+	pci_unregister_driver(&thunderx_ocx_driver);
+err_lmc:
+	pci_unregister_driver(&thunderx_lmc_driver);
+
+	return rc;
+}
+
+static void __exit thunderx_edac_exit(void)
+{
+	pci_unregister_driver(&thunderx_l2c_driver);
+	pci_unregister_driver(&thunderx_ocx_driver);
+	pci_unregister_driver(&thunderx_lmc_driver);
+
+}
+
+module_init(thunderx_edac_init);
+module_exit(thunderx_edac_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Cavium, Inc.");
+MODULE_DESCRIPTION("EDAC Driver for Cavium ThunderX");
diff --git a/drivers/edac/ti_edac.c b/drivers/edac/ti_edac.c
new file mode 100644
index 000000000..9ab9fa0a9
--- /dev/null
+++ b/drivers/edac/ti_edac.c
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Texas Instruments DDR3 ECC error correction and detection driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/edac.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+
+#include "edac_module.h"
+
+/* EMIF controller registers */
+#define EMIF_SDRAM_CONFIG		0x008
+#define EMIF_IRQ_STATUS			0x0ac
+#define EMIF_IRQ_ENABLE_SET		0x0b4
+#define EMIF_ECC_CTRL			0x110
+#define EMIF_1B_ECC_ERR_CNT		0x130
+#define EMIF_1B_ECC_ERR_THRSH		0x134
+#define EMIF_1B_ECC_ERR_ADDR_LOG	0x13c
+#define EMIF_2B_ECC_ERR_ADDR_LOG	0x140
+
+/* Bit definitions for EMIF_SDRAM_CONFIG */
+#define SDRAM_TYPE_SHIFT		29
+#define SDRAM_TYPE_MASK			GENMASK(31, 29)
+#define SDRAM_TYPE_DDR3			(3 << SDRAM_TYPE_SHIFT)
+#define SDRAM_TYPE_DDR2			(2 << SDRAM_TYPE_SHIFT)
+#define SDRAM_NARROW_MODE_MASK		GENMASK(15, 14)
+#define SDRAM_K2_NARROW_MODE_SHIFT	12
+#define SDRAM_K2_NARROW_MODE_MASK	GENMASK(13, 12)
+#define SDRAM_ROWSIZE_SHIFT		7
+#define SDRAM_ROWSIZE_MASK		GENMASK(9, 7)
+#define SDRAM_IBANK_SHIFT		4
+#define SDRAM_IBANK_MASK		GENMASK(6, 4)
+#define SDRAM_K2_IBANK_SHIFT		5
+#define SDRAM_K2_IBANK_MASK		GENMASK(6, 5)
+#define SDRAM_K2_EBANK_SHIFT		3
+#define SDRAM_K2_EBANK_MASK		BIT(SDRAM_K2_EBANK_SHIFT)
+#define SDRAM_PAGESIZE_SHIFT		0
+#define SDRAM_PAGESIZE_MASK		GENMASK(2, 0)
+#define SDRAM_K2_PAGESIZE_SHIFT		0
+#define SDRAM_K2_PAGESIZE_MASK		GENMASK(1, 0)
+
+#define EMIF_1B_ECC_ERR_THRSH_SHIFT	24
+
+/* IRQ bit definitions */
+#define EMIF_1B_ECC_ERR			BIT(5)
+#define EMIF_2B_ECC_ERR			BIT(4)
+#define EMIF_WR_ECC_ERR			BIT(3)
+#define EMIF_SYS_ERR			BIT(0)
+/* Bit 31 enables ECC and 28 enables RMW */
+#define ECC_ENABLED			(BIT(31) | BIT(28))
+
+#define EDAC_MOD_NAME			"ti-emif-edac"
+
+enum {
+	EMIF_TYPE_DRA7,
+	EMIF_TYPE_K2
+};
+
+struct ti_edac {
+	void __iomem *reg;
+};
+
+static u32 ti_edac_readl(struct ti_edac *edac, u16 offset)
+{
+	return readl_relaxed(edac->reg + offset);
+}
+
+static void ti_edac_writel(struct ti_edac *edac, u32 val, u16 offset)
+{
+	writel_relaxed(val, edac->reg + offset);
+}
+
+static irqreturn_t ti_edac_isr(int irq, void *data)
+{
+	struct mem_ctl_info *mci = data;
+	struct ti_edac *edac = mci->pvt_info;
+	u32 irq_status;
+	u32 err_addr;
+	int err_count;
+
+	irq_status = ti_edac_readl(edac, EMIF_IRQ_STATUS);
+
+	if (irq_status & EMIF_1B_ECC_ERR) {
+		err_addr = ti_edac_readl(edac, EMIF_1B_ECC_ERR_ADDR_LOG);
+		err_count = ti_edac_readl(edac, EMIF_1B_ECC_ERR_CNT);
+		ti_edac_writel(edac, err_count, EMIF_1B_ECC_ERR_CNT);
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count,
+				     err_addr >> PAGE_SHIFT,
+				     err_addr & ~PAGE_MASK, -1, 0, 0, 0,
+				     mci->ctl_name, "1B");
+	}
+
+	if (irq_status & EMIF_2B_ECC_ERR) {
+		err_addr = ti_edac_readl(edac, EMIF_2B_ECC_ERR_ADDR_LOG);
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+				     err_addr >> PAGE_SHIFT,
+				     err_addr & ~PAGE_MASK, -1, 0, 0, 0,
+				     mci->ctl_name, "2B");
+	}
+
+	if (irq_status & EMIF_WR_ECC_ERR)
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+				     0, 0, -1, 0, 0, 0,
+				     mci->ctl_name, "WR");
+
+	ti_edac_writel(edac, irq_status, EMIF_IRQ_STATUS);
+
+	return IRQ_HANDLED;
+}
+
+static void ti_edac_setup_dimm(struct mem_ctl_info *mci, u32 type)
+{
+	struct dimm_info *dimm;
+	struct ti_edac *edac = mci->pvt_info;
+	int bits;
+	u32 val;
+	u32 memsize;
+
+	dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, 0, 0, 0);
+
+	val = ti_edac_readl(edac, EMIF_SDRAM_CONFIG);
+
+	if (type == EMIF_TYPE_DRA7) {
+		bits = ((val & SDRAM_PAGESIZE_MASK) >> SDRAM_PAGESIZE_SHIFT) + 8;
+		bits += ((val & SDRAM_ROWSIZE_MASK) >> SDRAM_ROWSIZE_SHIFT) + 9;
+		bits += (val & SDRAM_IBANK_MASK) >> SDRAM_IBANK_SHIFT;
+
+		if (val & SDRAM_NARROW_MODE_MASK) {
+			bits++;
+			dimm->dtype = DEV_X16;
+		} else {
+			bits += 2;
+			dimm->dtype = DEV_X32;
+		}
+	} else {
+		bits = 16;
+		bits += ((val & SDRAM_K2_PAGESIZE_MASK) >>
+			SDRAM_K2_PAGESIZE_SHIFT) + 8;
+		bits += (val & SDRAM_K2_IBANK_MASK) >> SDRAM_K2_IBANK_SHIFT;
+		bits += (val & SDRAM_K2_EBANK_MASK) >> SDRAM_K2_EBANK_SHIFT;
+
+		val = (val & SDRAM_K2_NARROW_MODE_MASK) >>
+			SDRAM_K2_NARROW_MODE_SHIFT;
+		switch (val) {
+		case 0:
+			bits += 3;
+			dimm->dtype = DEV_X64;
+			break;
+		case 1:
+			bits += 2;
+			dimm->dtype = DEV_X32;
+			break;
+		case 2:
+			bits++;
+			dimm->dtype = DEV_X16;
+			break;
+		}
+	}
+
+	memsize = 1 << bits;
+
+	dimm->nr_pages = memsize >> PAGE_SHIFT;
+	dimm->grain = 4;
+	if ((val & SDRAM_TYPE_MASK) == SDRAM_TYPE_DDR2)
+		dimm->mtype = MEM_DDR2;
+	else
+		dimm->mtype = MEM_DDR3;
+
+	val = ti_edac_readl(edac, EMIF_ECC_CTRL);
+	if (val & ECC_ENABLED)
+		dimm->edac_mode = EDAC_SECDED;
+	else
+		dimm->edac_mode = EDAC_NONE;
+}
+
+static const struct of_device_id ti_edac_of_match[] = {
+	{ .compatible = "ti,emif-keystone", .data = (void *)EMIF_TYPE_K2 },
+	{ .compatible = "ti,emif-dra7xx", .data = (void *)EMIF_TYPE_DRA7 },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ti_edac_of_match);
+
+static int _emif_get_id(struct device_node *node)
+{
+	struct device_node *np;
+	const __be32 *addrp;
+	u32 addr, my_addr;
+	int my_id = 0;
+
+	addrp = of_get_address(node, 0, NULL, NULL);
+	my_addr = (u32)of_translate_address(node, addrp);
+
+	for_each_matching_node(np, ti_edac_of_match) {
+		if (np == node)
+			continue;
+
+		addrp = of_get_address(np, 0, NULL, NULL);
+		addr = (u32)of_translate_address(np, addrp);
+
+		edac_printk(KERN_INFO, EDAC_MOD_NAME,
+			    "addr=%x, my_addr=%x\n",
+			    addr, my_addr);
+
+		if (addr < my_addr)
+			my_id++;
+	}
+
+	return my_id;
+}
+
+static int ti_edac_probe(struct platform_device *pdev)
+{
+	int error_irq = 0, ret = -ENODEV;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	void __iomem *reg;
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[1];
+	const struct of_device_id *id;
+	struct ti_edac *edac;
+	int emif_id;
+
+	id = of_match_device(ti_edac_of_match, &pdev->dev);
+	if (!id)
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	reg = devm_ioremap_resource(dev, res);
+	if (IS_ERR(reg)) {
+		edac_printk(KERN_ERR, EDAC_MOD_NAME,
+			    "EMIF controller regs not defined\n");
+		return PTR_ERR(reg);
+	}
+
+	layers[0].type = EDAC_MC_LAYER_ALL_MEM;
+	layers[0].size = 1;
+
+	/* Allocate ID number for our EMIF controller */
+	emif_id = _emif_get_id(pdev->dev.of_node);
+	if (emif_id < 0)
+		return -EINVAL;
+
+	mci = edac_mc_alloc(emif_id, 1, layers, sizeof(*edac));
+	if (!mci)
+		return -ENOMEM;
+
+	mci->pdev = &pdev->dev;
+	edac = mci->pvt_info;
+	edac->reg = reg;
+	platform_set_drvdata(pdev, mci);
+
+	mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR2;
+	mci->edac_ctl_cap = EDAC_FLAG_SECDED | EDAC_FLAG_NONE;
+	mci->mod_name = EDAC_MOD_NAME;
+	mci->ctl_name = id->compatible;
+	mci->dev_name = dev_name(&pdev->dev);
+
+	/* Setup memory layout */
+	ti_edac_setup_dimm(mci, (u32)(id->data));
+
+	/* add EMIF ECC error handler */
+	error_irq = platform_get_irq(pdev, 0);
+	if (error_irq < 0) {
+		ret = error_irq;
+		edac_printk(KERN_ERR, EDAC_MOD_NAME,
+			    "EMIF irq number not defined.\n");
+		goto err;
+	}
+
+	ret = devm_request_irq(dev, error_irq, ti_edac_isr, 0,
+			       "emif-edac-irq", mci);
+	if (ret) {
+		edac_printk(KERN_ERR, EDAC_MOD_NAME,
+			    "request_irq fail for EMIF EDAC irq\n");
+		goto err;
+	}
+
+	ret = edac_mc_add_mc(mci);
+	if (ret) {
+		edac_printk(KERN_ERR, EDAC_MOD_NAME,
+			    "Failed to register mci: %d.\n", ret);
+		goto err;
+	}
+
+	/* Generate an interrupt with each 1b error */
+	ti_edac_writel(edac, 1 << EMIF_1B_ECC_ERR_THRSH_SHIFT,
+		       EMIF_1B_ECC_ERR_THRSH);
+
+	/* Enable interrupts */
+	ti_edac_writel(edac,
+		       EMIF_1B_ECC_ERR | EMIF_2B_ECC_ERR | EMIF_WR_ECC_ERR,
+		       EMIF_IRQ_ENABLE_SET);
+
+	return 0;
+
+err:
+	edac_mc_free(mci);
+	return ret;
+}
+
+static int ti_edac_remove(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+	edac_mc_del_mc(&pdev->dev);
+	edac_mc_free(mci);
+
+	return 0;
+}
+
+static struct platform_driver ti_edac_driver = {
+	.probe = ti_edac_probe,
+	.remove = ti_edac_remove,
+	.driver = {
+		   .name = EDAC_MOD_NAME,
+		   .of_match_table = ti_edac_of_match,
+	},
+};
+
+module_platform_driver(ti_edac_driver);
+
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("EDAC Driver for Texas Instruments DDR3 MC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/edac/wq.c b/drivers/edac/wq.c
new file mode 100644
index 000000000..2a9a11ae2
--- /dev/null
+++ b/drivers/edac/wq.c
@@ -0,0 +1,42 @@
+#include "edac_module.h"
+
+static struct workqueue_struct *wq;
+
+bool edac_queue_work(struct delayed_work *work, unsigned long delay)
+{
+	return queue_delayed_work(wq, work, delay);
+}
+EXPORT_SYMBOL_GPL(edac_queue_work);
+
+bool edac_mod_work(struct delayed_work *work, unsigned long delay)
+{
+	return mod_delayed_work(wq, work, delay);
+}
+EXPORT_SYMBOL_GPL(edac_mod_work);
+
+bool edac_stop_work(struct delayed_work *work)
+{
+	bool ret;
+
+	ret = cancel_delayed_work_sync(work);
+	flush_workqueue(wq);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(edac_stop_work);
+
+int edac_workqueue_setup(void)
+{
+	wq = alloc_ordered_workqueue("edac-poller", WQ_MEM_RECLAIM);
+	if (!wq)
+		return -ENODEV;
+	else
+		return 0;
+}
+
+void edac_workqueue_teardown(void)
+{
+	flush_workqueue(wq);
+	destroy_workqueue(wq);
+	wq = NULL;
+}
diff --git a/drivers/edac/x38_edac.c b/drivers/edac/x38_edac.c
new file mode 100644
index 000000000..cc779f3f9
--- /dev/null
+++ b/drivers/edac/x38_edac.c
@@ -0,0 +1,524 @@
+/*
+ * Intel X38 Memory Controller kernel module
+ * Copyright (C) 2008 Cluster Computing, Inc.
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * This file is based on i3200_edac.c
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/edac.h>
+
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include "edac_module.h"
+
+#define EDAC_MOD_STR		"x38_edac"
+
+#define PCI_DEVICE_ID_INTEL_X38_HB	0x29e0
+
+#define X38_RANKS		8
+#define X38_RANKS_PER_CHANNEL	4
+#define X38_CHANNELS		2
+
+/* Intel X38 register addresses - device 0 function 0 - DRAM Controller */
+
+#define X38_MCHBAR_LOW	0x48	/* MCH Memory Mapped Register BAR */
+#define X38_MCHBAR_HIGH	0x4c
+#define X38_MCHBAR_MASK	0xfffffc000ULL	/* bits 35:14 */
+#define X38_MMR_WINDOW_SIZE	16384
+
+#define X38_TOM	0xa0	/* Top of Memory (16b)
+				 *
+				 * 15:10 reserved
+				 *  9:0  total populated physical memory
+				 */
+#define X38_TOM_MASK	0x3ff	/* bits 9:0 */
+#define X38_TOM_SHIFT 26	/* 64MiB grain */
+
+#define X38_ERRSTS	0xc8	/* Error Status Register (16b)
+				 *
+				 * 15    reserved
+				 * 14    Isochronous TBWRR Run Behind FIFO Full
+				 *       (ITCV)
+				 * 13    Isochronous TBWRR Run Behind FIFO Put
+				 *       (ITSTV)
+				 * 12    reserved
+				 * 11    MCH Thermal Sensor Event
+				 *       for SMI/SCI/SERR (GTSE)
+				 * 10    reserved
+				 *  9    LOCK to non-DRAM Memory Flag (LCKF)
+				 *  8    reserved
+				 *  7    DRAM Throttle Flag (DTF)
+				 *  6:2  reserved
+				 *  1    Multi-bit DRAM ECC Error Flag (DMERR)
+				 *  0    Single-bit DRAM ECC Error Flag (DSERR)
+				 */
+#define X38_ERRSTS_UE		0x0002
+#define X38_ERRSTS_CE		0x0001
+#define X38_ERRSTS_BITS	(X38_ERRSTS_UE | X38_ERRSTS_CE)
+
+
+/* Intel  MMIO register space - device 0 function 0 - MMR space */
+
+#define X38_C0DRB	0x200	/* Channel 0 DRAM Rank Boundary (16b x 4)
+				 *
+				 * 15:10 reserved
+				 *  9:0  Channel 0 DRAM Rank Boundary Address
+				 */
+#define X38_C1DRB	0x600	/* Channel 1 DRAM Rank Boundary (16b x 4) */
+#define X38_DRB_MASK	0x3ff	/* bits 9:0 */
+#define X38_DRB_SHIFT 26	/* 64MiB grain */
+
+#define X38_C0ECCERRLOG 0x280	/* Channel 0 ECC Error Log (64b)
+				 *
+				 * 63:48 Error Column Address (ERRCOL)
+				 * 47:32 Error Row Address (ERRROW)
+				 * 31:29 Error Bank Address (ERRBANK)
+				 * 28:27 Error Rank Address (ERRRANK)
+				 * 26:24 reserved
+				 * 23:16 Error Syndrome (ERRSYND)
+				 * 15: 2 reserved
+				 *    1  Multiple Bit Error Status (MERRSTS)
+				 *    0  Correctable Error Status (CERRSTS)
+				 */
+#define X38_C1ECCERRLOG 0x680	/* Channel 1 ECC Error Log (64b) */
+#define X38_ECCERRLOG_CE	0x1
+#define X38_ECCERRLOG_UE	0x2
+#define X38_ECCERRLOG_RANK_BITS	0x18000000
+#define X38_ECCERRLOG_SYNDROME_BITS	0xff0000
+
+#define X38_CAPID0 0xe0	/* see P.94 of spec for details */
+
+static int x38_channel_num;
+
+static int how_many_channel(struct pci_dev *pdev)
+{
+	unsigned char capid0_8b; /* 8th byte of CAPID0 */
+
+	pci_read_config_byte(pdev, X38_CAPID0 + 8, &capid0_8b);
+	if (capid0_8b & 0x20) {	/* check DCD: Dual Channel Disable */
+		edac_dbg(0, "In single channel mode\n");
+		x38_channel_num = 1;
+	} else {
+		edac_dbg(0, "In dual channel mode\n");
+		x38_channel_num = 2;
+	}
+
+	return x38_channel_num;
+}
+
+static unsigned long eccerrlog_syndrome(u64 log)
+{
+	return (log & X38_ECCERRLOG_SYNDROME_BITS) >> 16;
+}
+
+static int eccerrlog_row(int channel, u64 log)
+{
+	return ((log & X38_ECCERRLOG_RANK_BITS) >> 27) |
+		(channel * X38_RANKS_PER_CHANNEL);
+}
+
+enum x38_chips {
+	X38 = 0,
+};
+
+struct x38_dev_info {
+	const char *ctl_name;
+};
+
+struct x38_error_info {
+	u16 errsts;
+	u16 errsts2;
+	u64 eccerrlog[X38_CHANNELS];
+};
+
+static const struct x38_dev_info x38_devs[] = {
+	[X38] = {
+		.ctl_name = "x38"},
+};
+
+static struct pci_dev *mci_pdev;
+static int x38_registered = 1;
+
+
+static void x38_clear_error_info(struct mem_ctl_info *mci)
+{
+	struct pci_dev *pdev;
+
+	pdev = to_pci_dev(mci->pdev);
+
+	/*
+	 * Clear any error bits.
+	 * (Yes, we really clear bits by writing 1 to them.)
+	 */
+	pci_write_bits16(pdev, X38_ERRSTS, X38_ERRSTS_BITS,
+			 X38_ERRSTS_BITS);
+}
+
+static void x38_get_and_clear_error_info(struct mem_ctl_info *mci,
+				 struct x38_error_info *info)
+{
+	struct pci_dev *pdev;
+	void __iomem *window = mci->pvt_info;
+
+	pdev = to_pci_dev(mci->pdev);
+
+	/*
+	 * This is a mess because there is no atomic way to read all the
+	 * registers at once and the registers can transition from CE being
+	 * overwritten by UE.
+	 */
+	pci_read_config_word(pdev, X38_ERRSTS, &info->errsts);
+	if (!(info->errsts & X38_ERRSTS_BITS))
+		return;
+
+	info->eccerrlog[0] = lo_hi_readq(window + X38_C0ECCERRLOG);
+	if (x38_channel_num == 2)
+		info->eccerrlog[1] = lo_hi_readq(window + X38_C1ECCERRLOG);
+
+	pci_read_config_word(pdev, X38_ERRSTS, &info->errsts2);
+
+	/*
+	 * If the error is the same for both reads then the first set
+	 * of reads is valid.  If there is a change then there is a CE
+	 * with no info and the second set of reads is valid and
+	 * should be UE info.
+	 */
+	if ((info->errsts ^ info->errsts2) & X38_ERRSTS_BITS) {
+		info->eccerrlog[0] = lo_hi_readq(window + X38_C0ECCERRLOG);
+		if (x38_channel_num == 2)
+			info->eccerrlog[1] =
+				lo_hi_readq(window + X38_C1ECCERRLOG);
+	}
+
+	x38_clear_error_info(mci);
+}
+
+static void x38_process_error_info(struct mem_ctl_info *mci,
+				struct x38_error_info *info)
+{
+	int channel;
+	u64 log;
+
+	if (!(info->errsts & X38_ERRSTS_BITS))
+		return;
+
+	if ((info->errsts ^ info->errsts2) & X38_ERRSTS_BITS) {
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
+				     -1, -1, -1,
+				     "UE overwrote CE", "");
+		info->errsts = info->errsts2;
+	}
+
+	for (channel = 0; channel < x38_channel_num; channel++) {
+		log = info->eccerrlog[channel];
+		if (log & X38_ECCERRLOG_UE) {
+			edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+					     0, 0, 0,
+					     eccerrlog_row(channel, log),
+					     -1, -1,
+					     "x38 UE", "");
+		} else if (log & X38_ECCERRLOG_CE) {
+			edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+					     0, 0, eccerrlog_syndrome(log),
+					     eccerrlog_row(channel, log),
+					     -1, -1,
+					     "x38 CE", "");
+		}
+	}
+}
+
+static void x38_check(struct mem_ctl_info *mci)
+{
+	struct x38_error_info info;
+
+	edac_dbg(1, "MC%d\n", mci->mc_idx);
+	x38_get_and_clear_error_info(mci, &info);
+	x38_process_error_info(mci, &info);
+}
+
+static void __iomem *x38_map_mchbar(struct pci_dev *pdev)
+{
+	union {
+		u64 mchbar;
+		struct {
+			u32 mchbar_low;
+			u32 mchbar_high;
+		};
+	} u;
+	void __iomem *window;
+
+	pci_read_config_dword(pdev, X38_MCHBAR_LOW, &u.mchbar_low);
+	pci_write_config_dword(pdev, X38_MCHBAR_LOW, u.mchbar_low | 0x1);
+	pci_read_config_dword(pdev, X38_MCHBAR_HIGH, &u.mchbar_high);
+	u.mchbar &= X38_MCHBAR_MASK;
+
+	if (u.mchbar != (resource_size_t)u.mchbar) {
+		printk(KERN_ERR
+			"x38: mmio space beyond accessible range (0x%llx)\n",
+			(unsigned long long)u.mchbar);
+		return NULL;
+	}
+
+	window = ioremap_nocache(u.mchbar, X38_MMR_WINDOW_SIZE);
+	if (!window)
+		printk(KERN_ERR "x38: cannot map mmio space at 0x%llx\n",
+			(unsigned long long)u.mchbar);
+
+	return window;
+}
+
+
+static void x38_get_drbs(void __iomem *window,
+			u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL])
+{
+	int i;
+
+	for (i = 0; i < X38_RANKS_PER_CHANNEL; i++) {
+		drbs[0][i] = readw(window + X38_C0DRB + 2*i) & X38_DRB_MASK;
+		drbs[1][i] = readw(window + X38_C1DRB + 2*i) & X38_DRB_MASK;
+	}
+}
+
+static bool x38_is_stacked(struct pci_dev *pdev,
+			u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL])
+{
+	u16 tom;
+
+	pci_read_config_word(pdev, X38_TOM, &tom);
+	tom &= X38_TOM_MASK;
+
+	return drbs[X38_CHANNELS - 1][X38_RANKS_PER_CHANNEL - 1] == tom;
+}
+
+static unsigned long drb_to_nr_pages(
+			u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL],
+			bool stacked, int channel, int rank)
+{
+	int n;
+
+	n = drbs[channel][rank];
+	if (rank > 0)
+		n -= drbs[channel][rank - 1];
+	if (stacked && (channel == 1) && drbs[channel][rank] ==
+				drbs[channel][X38_RANKS_PER_CHANNEL - 1]) {
+		n -= drbs[0][X38_RANKS_PER_CHANNEL - 1];
+	}
+
+	n <<= (X38_DRB_SHIFT - PAGE_SHIFT);
+	return n;
+}
+
+static int x38_probe1(struct pci_dev *pdev, int dev_idx)
+{
+	int rc;
+	int i, j;
+	struct mem_ctl_info *mci = NULL;
+	struct edac_mc_layer layers[2];
+	u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL];
+	bool stacked;
+	void __iomem *window;
+
+	edac_dbg(0, "MC:\n");
+
+	window = x38_map_mchbar(pdev);
+	if (!window)
+		return -ENODEV;
+
+	x38_get_drbs(window, drbs);
+
+	how_many_channel(pdev);
+
+	/* FIXME: unconventional pvt_info usage */
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = X38_RANKS;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = x38_channel_num;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0);
+	if (!mci)
+		return -ENOMEM;
+
+	edac_dbg(3, "MC: init mci\n");
+
+	mci->pdev = &pdev->dev;
+	mci->mtype_cap = MEM_FLAG_DDR2;
+
+	mci->edac_ctl_cap = EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+
+	mci->mod_name = EDAC_MOD_STR;
+	mci->ctl_name = x38_devs[dev_idx].ctl_name;
+	mci->dev_name = pci_name(pdev);
+	mci->edac_check = x38_check;
+	mci->ctl_page_to_phys = NULL;
+	mci->pvt_info = window;
+
+	stacked = x38_is_stacked(pdev, drbs);
+
+	/*
+	 * The dram rank boundary (DRB) reg values are boundary addresses
+	 * for each DRAM rank with a granularity of 64MB.  DRB regs are
+	 * cumulative; the last one will contain the total memory
+	 * contained in all ranks.
+	 */
+	for (i = 0; i < mci->nr_csrows; i++) {
+		unsigned long nr_pages;
+		struct csrow_info *csrow = mci->csrows[i];
+
+		nr_pages = drb_to_nr_pages(drbs, stacked,
+			i / X38_RANKS_PER_CHANNEL,
+			i % X38_RANKS_PER_CHANNEL);
+
+		if (nr_pages == 0)
+			continue;
+
+		for (j = 0; j < x38_channel_num; j++) {
+			struct dimm_info *dimm = csrow->channels[j]->dimm;
+
+			dimm->nr_pages = nr_pages / x38_channel_num;
+			dimm->grain = nr_pages << PAGE_SHIFT;
+			dimm->mtype = MEM_DDR2;
+			dimm->dtype = DEV_UNKNOWN;
+			dimm->edac_mode = EDAC_UNKNOWN;
+		}
+	}
+
+	x38_clear_error_info(mci);
+
+	rc = -ENODEV;
+	if (edac_mc_add_mc(mci)) {
+		edac_dbg(3, "MC: failed edac_mc_add_mc()\n");
+		goto fail;
+	}
+
+	/* get this far and it's successful */
+	edac_dbg(3, "MC: success\n");
+	return 0;
+
+fail:
+	iounmap(window);
+	if (mci)
+		edac_mc_free(mci);
+
+	return rc;
+}
+
+static int x38_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	int rc;
+
+	edac_dbg(0, "MC:\n");
+
+	if (pci_enable_device(pdev) < 0)
+		return -EIO;
+
+	rc = x38_probe1(pdev, ent->driver_data);
+	if (!mci_pdev)
+		mci_pdev = pci_dev_get(pdev);
+
+	return rc;
+}
+
+static void x38_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+
+	edac_dbg(0, "\n");
+
+	mci = edac_mc_del_mc(&pdev->dev);
+	if (!mci)
+		return;
+
+	iounmap(mci->pvt_info);
+
+	edac_mc_free(mci);
+}
+
+static const struct pci_device_id x38_pci_tbl[] = {
+	{
+	 PCI_VEND_DEV(INTEL, X38_HB), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	 X38},
+	{
+	 0,
+	 }			/* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, x38_pci_tbl);
+
+static struct pci_driver x38_driver = {
+	.name = EDAC_MOD_STR,
+	.probe = x38_init_one,
+	.remove = x38_remove_one,
+	.id_table = x38_pci_tbl,
+};
+
+static int __init x38_init(void)
+{
+	int pci_rc;
+
+	edac_dbg(3, "MC:\n");
+
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
+
+	pci_rc = pci_register_driver(&x38_driver);
+	if (pci_rc < 0)
+		goto fail0;
+
+	if (!mci_pdev) {
+		x38_registered = 0;
+		mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+					PCI_DEVICE_ID_INTEL_X38_HB, NULL);
+		if (!mci_pdev) {
+			edac_dbg(0, "x38 pci_get_device fail\n");
+			pci_rc = -ENODEV;
+			goto fail1;
+		}
+
+		pci_rc = x38_init_one(mci_pdev, x38_pci_tbl);
+		if (pci_rc < 0) {
+			edac_dbg(0, "x38 init fail\n");
+			pci_rc = -ENODEV;
+			goto fail1;
+		}
+	}
+
+	return 0;
+
+fail1:
+	pci_unregister_driver(&x38_driver);
+
+fail0:
+	pci_dev_put(mci_pdev);
+
+	return pci_rc;
+}
+
+static void __exit x38_exit(void)
+{
+	edac_dbg(3, "MC:\n");
+
+	pci_unregister_driver(&x38_driver);
+	if (!x38_registered) {
+		x38_remove_one(mci_pdev);
+		pci_dev_put(mci_pdev);
+	}
+}
+
+module_init(x38_init);
+module_exit(x38_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cluster Computing, Inc. Hitoshi Mitake");
+MODULE_DESCRIPTION("MC support for Intel X38 memory hub controllers");
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/edac/xgene_edac.c b/drivers/edac/xgene_edac.c
new file mode 100644
index 000000000..028ddc790
--- /dev/null
+++ b/drivers/edac/xgene_edac.c
@@ -0,0 +1,2057 @@
+/*
+ * APM X-Gene SoC EDAC (error detection and correction)
+ *
+ * Copyright (c) 2015, Applied Micro Circuits Corporation
+ * Author: Feng Kan <fkan@apm.com>
+ *         Loc Ho <lho@apm.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/ctype.h>
+#include <linux/edac.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+
+#include "edac_module.h"
+
+#define EDAC_MOD_STR			"xgene_edac"
+
+/* Global error configuration status registers (CSR) */
+#define PCPHPERRINTSTS			0x0000
+#define PCPHPERRINTMSK			0x0004
+#define  MCU_CTL_ERR_MASK		BIT(12)
+#define  IOB_PA_ERR_MASK		BIT(11)
+#define  IOB_BA_ERR_MASK		BIT(10)
+#define  IOB_XGIC_ERR_MASK		BIT(9)
+#define  IOB_RB_ERR_MASK		BIT(8)
+#define  L3C_UNCORR_ERR_MASK		BIT(5)
+#define  MCU_UNCORR_ERR_MASK		BIT(4)
+#define  PMD3_MERR_MASK			BIT(3)
+#define  PMD2_MERR_MASK			BIT(2)
+#define  PMD1_MERR_MASK			BIT(1)
+#define  PMD0_MERR_MASK			BIT(0)
+#define PCPLPERRINTSTS			0x0008
+#define PCPLPERRINTMSK			0x000C
+#define  CSW_SWITCH_TRACE_ERR_MASK	BIT(2)
+#define  L3C_CORR_ERR_MASK		BIT(1)
+#define  MCU_CORR_ERR_MASK		BIT(0)
+#define MEMERRINTSTS			0x0010
+#define MEMERRINTMSK			0x0014
+
+struct xgene_edac {
+	struct device		*dev;
+	struct regmap		*csw_map;
+	struct regmap		*mcba_map;
+	struct regmap		*mcbb_map;
+	struct regmap		*efuse_map;
+	struct regmap		*rb_map;
+	void __iomem		*pcp_csr;
+	spinlock_t		lock;
+	struct dentry           *dfs;
+
+	struct list_head	mcus;
+	struct list_head	pmds;
+	struct list_head	l3s;
+	struct list_head	socs;
+
+	struct mutex		mc_lock;
+	int			mc_active_mask;
+	int			mc_registered_mask;
+};
+
+static void xgene_edac_pcp_rd(struct xgene_edac *edac, u32 reg, u32 *val)
+{
+	*val = readl(edac->pcp_csr + reg);
+}
+
+static void xgene_edac_pcp_clrbits(struct xgene_edac *edac, u32 reg,
+				   u32 bits_mask)
+{
+	u32 val;
+
+	spin_lock(&edac->lock);
+	val = readl(edac->pcp_csr + reg);
+	val &= ~bits_mask;
+	writel(val, edac->pcp_csr + reg);
+	spin_unlock(&edac->lock);
+}
+
+static void xgene_edac_pcp_setbits(struct xgene_edac *edac, u32 reg,
+				   u32 bits_mask)
+{
+	u32 val;
+
+	spin_lock(&edac->lock);
+	val = readl(edac->pcp_csr + reg);
+	val |= bits_mask;
+	writel(val, edac->pcp_csr + reg);
+	spin_unlock(&edac->lock);
+}
+
+/* Memory controller error CSR */
+#define MCU_MAX_RANK			8
+#define MCU_RANK_STRIDE			0x40
+
+#define MCUGECR				0x0110
+#define  MCU_GECR_DEMANDUCINTREN_MASK	BIT(0)
+#define  MCU_GECR_BACKUCINTREN_MASK	BIT(1)
+#define  MCU_GECR_CINTREN_MASK		BIT(2)
+#define  MUC_GECR_MCUADDRERREN_MASK	BIT(9)
+#define MCUGESR				0x0114
+#define  MCU_GESR_ADDRNOMATCH_ERR_MASK	BIT(7)
+#define  MCU_GESR_ADDRMULTIMATCH_ERR_MASK	BIT(6)
+#define  MCU_GESR_PHYP_ERR_MASK		BIT(3)
+#define MCUESRR0			0x0314
+#define  MCU_ESRR_MULTUCERR_MASK	BIT(3)
+#define  MCU_ESRR_BACKUCERR_MASK	BIT(2)
+#define  MCU_ESRR_DEMANDUCERR_MASK	BIT(1)
+#define  MCU_ESRR_CERR_MASK		BIT(0)
+#define MCUESRRA0			0x0318
+#define MCUEBLRR0			0x031c
+#define  MCU_EBLRR_ERRBANK_RD(src)	(((src) & 0x00000007) >> 0)
+#define MCUERCRR0			0x0320
+#define  MCU_ERCRR_ERRROW_RD(src)	(((src) & 0xFFFF0000) >> 16)
+#define  MCU_ERCRR_ERRCOL_RD(src)	((src) & 0x00000FFF)
+#define MCUSBECNT0			0x0324
+#define MCU_SBECNT_COUNT(src)		((src) & 0xFFFF)
+
+#define CSW_CSWCR			0x0000
+#define  CSW_CSWCR_DUALMCB_MASK		BIT(0)
+
+#define MCBADDRMR			0x0000
+#define  MCBADDRMR_MCU_INTLV_MODE_MASK	BIT(3)
+#define  MCBADDRMR_DUALMCU_MODE_MASK	BIT(2)
+#define  MCBADDRMR_MCB_INTLV_MODE_MASK	BIT(1)
+#define  MCBADDRMR_ADDRESS_MODE_MASK	BIT(0)
+
+struct xgene_edac_mc_ctx {
+	struct list_head	next;
+	char			*name;
+	struct mem_ctl_info	*mci;
+	struct xgene_edac	*edac;
+	void __iomem		*mcu_csr;
+	u32			mcu_id;
+};
+
+static ssize_t xgene_edac_mc_err_inject_write(struct file *file,
+					      const char __user *data,
+					      size_t count, loff_t *ppos)
+{
+	struct mem_ctl_info *mci = file->private_data;
+	struct xgene_edac_mc_ctx *ctx = mci->pvt_info;
+	int i;
+
+	for (i = 0; i < MCU_MAX_RANK; i++) {
+		writel(MCU_ESRR_MULTUCERR_MASK | MCU_ESRR_BACKUCERR_MASK |
+		       MCU_ESRR_DEMANDUCERR_MASK | MCU_ESRR_CERR_MASK,
+		       ctx->mcu_csr + MCUESRRA0 + i * MCU_RANK_STRIDE);
+	}
+	return count;
+}
+
+static const struct file_operations xgene_edac_mc_debug_inject_fops = {
+	.open = simple_open,
+	.write = xgene_edac_mc_err_inject_write,
+	.llseek = generic_file_llseek,
+};
+
+static void xgene_edac_mc_create_debugfs_node(struct mem_ctl_info *mci)
+{
+	if (!IS_ENABLED(CONFIG_EDAC_DEBUG))
+		return;
+
+	if (!mci->debugfs)
+		return;
+
+	edac_debugfs_create_file("inject_ctrl", S_IWUSR, mci->debugfs, mci,
+				 &xgene_edac_mc_debug_inject_fops);
+}
+
+static void xgene_edac_mc_check(struct mem_ctl_info *mci)
+{
+	struct xgene_edac_mc_ctx *ctx = mci->pvt_info;
+	unsigned int pcp_hp_stat;
+	unsigned int pcp_lp_stat;
+	u32 reg;
+	u32 rank;
+	u32 bank;
+	u32 count;
+	u32 col_row;
+
+	xgene_edac_pcp_rd(ctx->edac, PCPHPERRINTSTS, &pcp_hp_stat);
+	xgene_edac_pcp_rd(ctx->edac, PCPLPERRINTSTS, &pcp_lp_stat);
+	if (!((MCU_UNCORR_ERR_MASK & pcp_hp_stat) ||
+	      (MCU_CTL_ERR_MASK & pcp_hp_stat) ||
+	      (MCU_CORR_ERR_MASK & pcp_lp_stat)))
+		return;
+
+	for (rank = 0; rank < MCU_MAX_RANK; rank++) {
+		reg = readl(ctx->mcu_csr + MCUESRR0 + rank * MCU_RANK_STRIDE);
+
+		/* Detect uncorrectable memory error */
+		if (reg & (MCU_ESRR_DEMANDUCERR_MASK |
+			   MCU_ESRR_BACKUCERR_MASK)) {
+			/* Detected uncorrectable memory error */
+			edac_mc_chipset_printk(mci, KERN_ERR, "X-Gene",
+				"MCU uncorrectable error at rank %d\n", rank);
+
+			edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci,
+				1, 0, 0, 0, 0, 0, -1, mci->ctl_name, "");
+		}
+
+		/* Detect correctable memory error */
+		if (reg & MCU_ESRR_CERR_MASK) {
+			bank = readl(ctx->mcu_csr + MCUEBLRR0 +
+				     rank * MCU_RANK_STRIDE);
+			col_row = readl(ctx->mcu_csr + MCUERCRR0 +
+					rank * MCU_RANK_STRIDE);
+			count = readl(ctx->mcu_csr + MCUSBECNT0 +
+				      rank * MCU_RANK_STRIDE);
+			edac_mc_chipset_printk(mci, KERN_WARNING, "X-Gene",
+				"MCU correctable error at rank %d bank %d column %d row %d count %d\n",
+				rank, MCU_EBLRR_ERRBANK_RD(bank),
+				MCU_ERCRR_ERRCOL_RD(col_row),
+				MCU_ERCRR_ERRROW_RD(col_row),
+				MCU_SBECNT_COUNT(count));
+
+			edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci,
+				1, 0, 0, 0, 0, 0, -1, mci->ctl_name, "");
+		}
+
+		/* Clear all error registers */
+		writel(0x0, ctx->mcu_csr + MCUEBLRR0 + rank * MCU_RANK_STRIDE);
+		writel(0x0, ctx->mcu_csr + MCUERCRR0 + rank * MCU_RANK_STRIDE);
+		writel(0x0, ctx->mcu_csr + MCUSBECNT0 +
+		       rank * MCU_RANK_STRIDE);
+		writel(reg, ctx->mcu_csr + MCUESRR0 + rank * MCU_RANK_STRIDE);
+	}
+
+	/* Detect memory controller error */
+	reg = readl(ctx->mcu_csr + MCUGESR);
+	if (reg) {
+		if (reg & MCU_GESR_ADDRNOMATCH_ERR_MASK)
+			edac_mc_chipset_printk(mci, KERN_WARNING, "X-Gene",
+				"MCU address miss-match error\n");
+		if (reg & MCU_GESR_ADDRMULTIMATCH_ERR_MASK)
+			edac_mc_chipset_printk(mci, KERN_WARNING, "X-Gene",
+				"MCU address multi-match error\n");
+
+		writel(reg, ctx->mcu_csr + MCUGESR);
+	}
+}
+
+static void xgene_edac_mc_irq_ctl(struct mem_ctl_info *mci, bool enable)
+{
+	struct xgene_edac_mc_ctx *ctx = mci->pvt_info;
+	unsigned int val;
+
+	if (edac_op_state != EDAC_OPSTATE_INT)
+		return;
+
+	mutex_lock(&ctx->edac->mc_lock);
+
+	/*
+	 * As there is only single bit for enable error and interrupt mask,
+	 * we must only enable top level interrupt after all MCUs are
+	 * registered. Otherwise, if there is an error and the corresponding
+	 * MCU has not registered, the interrupt will never get cleared. To
+	 * determine all MCU have registered, we will keep track of active
+	 * MCUs and registered MCUs.
+	 */
+	if (enable) {
+		/* Set registered MCU bit */
+		ctx->edac->mc_registered_mask |= 1 << ctx->mcu_id;
+
+		/* Enable interrupt after all active MCU registered */
+		if (ctx->edac->mc_registered_mask ==
+		    ctx->edac->mc_active_mask) {
+			/* Enable memory controller top level interrupt */
+			xgene_edac_pcp_clrbits(ctx->edac, PCPHPERRINTMSK,
+					       MCU_UNCORR_ERR_MASK |
+					       MCU_CTL_ERR_MASK);
+			xgene_edac_pcp_clrbits(ctx->edac, PCPLPERRINTMSK,
+					       MCU_CORR_ERR_MASK);
+		}
+
+		/* Enable MCU interrupt and error reporting */
+		val = readl(ctx->mcu_csr + MCUGECR);
+		val |= MCU_GECR_DEMANDUCINTREN_MASK |
+		       MCU_GECR_BACKUCINTREN_MASK |
+		       MCU_GECR_CINTREN_MASK |
+		       MUC_GECR_MCUADDRERREN_MASK;
+		writel(val, ctx->mcu_csr + MCUGECR);
+	} else {
+		/* Disable MCU interrupt */
+		val = readl(ctx->mcu_csr + MCUGECR);
+		val &= ~(MCU_GECR_DEMANDUCINTREN_MASK |
+			 MCU_GECR_BACKUCINTREN_MASK |
+			 MCU_GECR_CINTREN_MASK |
+			 MUC_GECR_MCUADDRERREN_MASK);
+		writel(val, ctx->mcu_csr + MCUGECR);
+
+		/* Disable memory controller top level interrupt */
+		xgene_edac_pcp_setbits(ctx->edac, PCPHPERRINTMSK,
+				       MCU_UNCORR_ERR_MASK | MCU_CTL_ERR_MASK);
+		xgene_edac_pcp_setbits(ctx->edac, PCPLPERRINTMSK,
+				       MCU_CORR_ERR_MASK);
+
+		/* Clear registered MCU bit */
+		ctx->edac->mc_registered_mask &= ~(1 << ctx->mcu_id);
+	}
+
+	mutex_unlock(&ctx->edac->mc_lock);
+}
+
+static int xgene_edac_mc_is_active(struct xgene_edac_mc_ctx *ctx, int mc_idx)
+{
+	unsigned int reg;
+	u32 mcu_mask;
+
+	if (regmap_read(ctx->edac->csw_map, CSW_CSWCR, &reg))
+		return 0;
+
+	if (reg & CSW_CSWCR_DUALMCB_MASK) {
+		/*
+		 * Dual MCB active - Determine if all 4 active or just MCU0
+		 * and MCU2 active
+		 */
+		if (regmap_read(ctx->edac->mcbb_map, MCBADDRMR, &reg))
+			return 0;
+		mcu_mask = (reg & MCBADDRMR_DUALMCU_MODE_MASK) ? 0xF : 0x5;
+	} else {
+		/*
+		 * Single MCB active - Determine if MCU0/MCU1 or just MCU0
+		 * active
+		 */
+		if (regmap_read(ctx->edac->mcba_map, MCBADDRMR, &reg))
+			return 0;
+		mcu_mask = (reg & MCBADDRMR_DUALMCU_MODE_MASK) ? 0x3 : 0x1;
+	}
+
+	/* Save active MC mask if hasn't set already */
+	if (!ctx->edac->mc_active_mask)
+		ctx->edac->mc_active_mask = mcu_mask;
+
+	return (mcu_mask & (1 << mc_idx)) ? 1 : 0;
+}
+
+static int xgene_edac_mc_add(struct xgene_edac *edac, struct device_node *np)
+{
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[2];
+	struct xgene_edac_mc_ctx tmp_ctx;
+	struct xgene_edac_mc_ctx *ctx;
+	struct resource res;
+	int rc;
+
+	memset(&tmp_ctx, 0, sizeof(tmp_ctx));
+	tmp_ctx.edac = edac;
+
+	if (!devres_open_group(edac->dev, xgene_edac_mc_add, GFP_KERNEL))
+		return -ENOMEM;
+
+	rc = of_address_to_resource(np, 0, &res);
+	if (rc < 0) {
+		dev_err(edac->dev, "no MCU resource address\n");
+		goto err_group;
+	}
+	tmp_ctx.mcu_csr = devm_ioremap_resource(edac->dev, &res);
+	if (IS_ERR(tmp_ctx.mcu_csr)) {
+		dev_err(edac->dev, "unable to map MCU resource\n");
+		rc = PTR_ERR(tmp_ctx.mcu_csr);
+		goto err_group;
+	}
+
+	/* Ignore non-active MCU */
+	if (of_property_read_u32(np, "memory-controller", &tmp_ctx.mcu_id)) {
+		dev_err(edac->dev, "no memory-controller property\n");
+		rc = -ENODEV;
+		goto err_group;
+	}
+	if (!xgene_edac_mc_is_active(&tmp_ctx, tmp_ctx.mcu_id)) {
+		rc = -ENODEV;
+		goto err_group;
+	}
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = 4;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = 2;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(tmp_ctx.mcu_id, ARRAY_SIZE(layers), layers,
+			    sizeof(*ctx));
+	if (!mci) {
+		rc = -ENOMEM;
+		goto err_group;
+	}
+
+	ctx = mci->pvt_info;
+	*ctx = tmp_ctx;		/* Copy over resource value */
+	ctx->name = "xgene_edac_mc_err";
+	ctx->mci = mci;
+	mci->pdev = &mci->dev;
+	mci->ctl_name = ctx->name;
+	mci->dev_name = ctx->name;
+
+	mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_RDDR2 | MEM_FLAG_RDDR3 |
+			 MEM_FLAG_DDR | MEM_FLAG_DDR2 | MEM_FLAG_DDR3;
+	mci->edac_ctl_cap = EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->mod_name = EDAC_MOD_STR;
+	mci->ctl_page_to_phys = NULL;
+	mci->scrub_cap = SCRUB_FLAG_HW_SRC;
+	mci->scrub_mode = SCRUB_HW_SRC;
+
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		mci->edac_check = xgene_edac_mc_check;
+
+	if (edac_mc_add_mc(mci)) {
+		dev_err(edac->dev, "edac_mc_add_mc failed\n");
+		rc = -EINVAL;
+		goto err_free;
+	}
+
+	xgene_edac_mc_create_debugfs_node(mci);
+
+	list_add(&ctx->next, &edac->mcus);
+
+	xgene_edac_mc_irq_ctl(mci, true);
+
+	devres_remove_group(edac->dev, xgene_edac_mc_add);
+
+	dev_info(edac->dev, "X-Gene EDAC MC registered\n");
+	return 0;
+
+err_free:
+	edac_mc_free(mci);
+err_group:
+	devres_release_group(edac->dev, xgene_edac_mc_add);
+	return rc;
+}
+
+static int xgene_edac_mc_remove(struct xgene_edac_mc_ctx *mcu)
+{
+	xgene_edac_mc_irq_ctl(mcu->mci, false);
+	edac_mc_del_mc(&mcu->mci->dev);
+	edac_mc_free(mcu->mci);
+	return 0;
+}
+
+/* CPU L1/L2 error CSR */
+#define MAX_CPU_PER_PMD				2
+#define CPU_CSR_STRIDE				0x00100000
+#define CPU_L2C_PAGE				0x000D0000
+#define CPU_MEMERR_L2C_PAGE			0x000E0000
+#define CPU_MEMERR_CPU_PAGE			0x000F0000
+
+#define MEMERR_CPU_ICFECR_PAGE_OFFSET		0x0000
+#define MEMERR_CPU_ICFESR_PAGE_OFFSET		0x0004
+#define  MEMERR_CPU_ICFESR_ERRWAY_RD(src)	(((src) & 0xFF000000) >> 24)
+#define  MEMERR_CPU_ICFESR_ERRINDEX_RD(src)	(((src) & 0x003F0000) >> 16)
+#define  MEMERR_CPU_ICFESR_ERRINFO_RD(src)	(((src) & 0x0000FF00) >> 8)
+#define  MEMERR_CPU_ICFESR_ERRTYPE_RD(src)	(((src) & 0x00000070) >> 4)
+#define  MEMERR_CPU_ICFESR_MULTCERR_MASK	BIT(2)
+#define  MEMERR_CPU_ICFESR_CERR_MASK		BIT(0)
+#define MEMERR_CPU_LSUESR_PAGE_OFFSET		0x000c
+#define  MEMERR_CPU_LSUESR_ERRWAY_RD(src)	(((src) & 0xFF000000) >> 24)
+#define  MEMERR_CPU_LSUESR_ERRINDEX_RD(src)	(((src) & 0x003F0000) >> 16)
+#define  MEMERR_CPU_LSUESR_ERRINFO_RD(src)	(((src) & 0x0000FF00) >> 8)
+#define  MEMERR_CPU_LSUESR_ERRTYPE_RD(src)	(((src) & 0x00000070) >> 4)
+#define  MEMERR_CPU_LSUESR_MULTCERR_MASK	BIT(2)
+#define  MEMERR_CPU_LSUESR_CERR_MASK		BIT(0)
+#define MEMERR_CPU_LSUECR_PAGE_OFFSET		0x0008
+#define MEMERR_CPU_MMUECR_PAGE_OFFSET		0x0010
+#define MEMERR_CPU_MMUESR_PAGE_OFFSET		0x0014
+#define  MEMERR_CPU_MMUESR_ERRWAY_RD(src)	(((src) & 0xFF000000) >> 24)
+#define  MEMERR_CPU_MMUESR_ERRINDEX_RD(src)	(((src) & 0x007F0000) >> 16)
+#define  MEMERR_CPU_MMUESR_ERRINFO_RD(src)	(((src) & 0x0000FF00) >> 8)
+#define  MEMERR_CPU_MMUESR_ERRREQSTR_LSU_MASK	BIT(7)
+#define  MEMERR_CPU_MMUESR_ERRTYPE_RD(src)	(((src) & 0x00000070) >> 4)
+#define  MEMERR_CPU_MMUESR_MULTCERR_MASK	BIT(2)
+#define  MEMERR_CPU_MMUESR_CERR_MASK		BIT(0)
+#define MEMERR_CPU_ICFESRA_PAGE_OFFSET		0x0804
+#define MEMERR_CPU_LSUESRA_PAGE_OFFSET		0x080c
+#define MEMERR_CPU_MMUESRA_PAGE_OFFSET		0x0814
+
+#define MEMERR_L2C_L2ECR_PAGE_OFFSET		0x0000
+#define MEMERR_L2C_L2ESR_PAGE_OFFSET		0x0004
+#define  MEMERR_L2C_L2ESR_ERRSYN_RD(src)	(((src) & 0xFF000000) >> 24)
+#define  MEMERR_L2C_L2ESR_ERRWAY_RD(src)	(((src) & 0x00FC0000) >> 18)
+#define  MEMERR_L2C_L2ESR_ERRCPU_RD(src)	(((src) & 0x00020000) >> 17)
+#define  MEMERR_L2C_L2ESR_ERRGROUP_RD(src)	(((src) & 0x0000E000) >> 13)
+#define  MEMERR_L2C_L2ESR_ERRACTION_RD(src)	(((src) & 0x00001C00) >> 10)
+#define  MEMERR_L2C_L2ESR_ERRTYPE_RD(src)	(((src) & 0x00000300) >> 8)
+#define  MEMERR_L2C_L2ESR_MULTUCERR_MASK	BIT(3)
+#define  MEMERR_L2C_L2ESR_MULTICERR_MASK	BIT(2)
+#define  MEMERR_L2C_L2ESR_UCERR_MASK		BIT(1)
+#define  MEMERR_L2C_L2ESR_ERR_MASK		BIT(0)
+#define MEMERR_L2C_L2EALR_PAGE_OFFSET		0x0008
+#define CPUX_L2C_L2RTOCR_PAGE_OFFSET		0x0010
+#define MEMERR_L2C_L2EAHR_PAGE_OFFSET		0x000c
+#define CPUX_L2C_L2RTOSR_PAGE_OFFSET		0x0014
+#define  MEMERR_L2C_L2RTOSR_MULTERR_MASK	BIT(1)
+#define  MEMERR_L2C_L2RTOSR_ERR_MASK		BIT(0)
+#define CPUX_L2C_L2RTOALR_PAGE_OFFSET		0x0018
+#define CPUX_L2C_L2RTOAHR_PAGE_OFFSET		0x001c
+#define MEMERR_L2C_L2ESRA_PAGE_OFFSET		0x0804
+
+/*
+ * Processor Module Domain (PMD) context - Context for a pair of processsors.
+ * Each PMD consists of 2 CPUs and a shared L2 cache. Each CPU consists of
+ * its own L1 cache.
+ */
+struct xgene_edac_pmd_ctx {
+	struct list_head	next;
+	struct device		ddev;
+	char			*name;
+	struct xgene_edac	*edac;
+	struct edac_device_ctl_info *edac_dev;
+	void __iomem		*pmd_csr;
+	u32			pmd;
+	int			version;
+};
+
+static void xgene_edac_pmd_l1_check(struct edac_device_ctl_info *edac_dev,
+				    int cpu_idx)
+{
+	struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info;
+	void __iomem *pg_f;
+	u32 val;
+
+	pg_f = ctx->pmd_csr + cpu_idx * CPU_CSR_STRIDE + CPU_MEMERR_CPU_PAGE;
+
+	val = readl(pg_f + MEMERR_CPU_ICFESR_PAGE_OFFSET);
+	if (!val)
+		goto chk_lsu;
+	dev_err(edac_dev->dev,
+		"CPU%d L1 memory error ICF 0x%08X Way 0x%02X Index 0x%02X Info 0x%02X\n",
+		ctx->pmd * MAX_CPU_PER_PMD + cpu_idx, val,
+		MEMERR_CPU_ICFESR_ERRWAY_RD(val),
+		MEMERR_CPU_ICFESR_ERRINDEX_RD(val),
+		MEMERR_CPU_ICFESR_ERRINFO_RD(val));
+	if (val & MEMERR_CPU_ICFESR_CERR_MASK)
+		dev_err(edac_dev->dev, "One or more correctable error\n");
+	if (val & MEMERR_CPU_ICFESR_MULTCERR_MASK)
+		dev_err(edac_dev->dev, "Multiple correctable error\n");
+	switch (MEMERR_CPU_ICFESR_ERRTYPE_RD(val)) {
+	case 1:
+		dev_err(edac_dev->dev, "L1 TLB multiple hit\n");
+		break;
+	case 2:
+		dev_err(edac_dev->dev, "Way select multiple hit\n");
+		break;
+	case 3:
+		dev_err(edac_dev->dev, "Physical tag parity error\n");
+		break;
+	case 4:
+	case 5:
+		dev_err(edac_dev->dev, "L1 data parity error\n");
+		break;
+	case 6:
+		dev_err(edac_dev->dev, "L1 pre-decode parity error\n");
+		break;
+	}
+
+	/* Clear any HW errors */
+	writel(val, pg_f + MEMERR_CPU_ICFESR_PAGE_OFFSET);
+
+	if (val & (MEMERR_CPU_ICFESR_CERR_MASK |
+		   MEMERR_CPU_ICFESR_MULTCERR_MASK))
+		edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name);
+
+chk_lsu:
+	val = readl(pg_f + MEMERR_CPU_LSUESR_PAGE_OFFSET);
+	if (!val)
+		goto chk_mmu;
+	dev_err(edac_dev->dev,
+		"CPU%d memory error LSU 0x%08X Way 0x%02X Index 0x%02X Info 0x%02X\n",
+		ctx->pmd * MAX_CPU_PER_PMD + cpu_idx, val,
+		MEMERR_CPU_LSUESR_ERRWAY_RD(val),
+		MEMERR_CPU_LSUESR_ERRINDEX_RD(val),
+		MEMERR_CPU_LSUESR_ERRINFO_RD(val));
+	if (val & MEMERR_CPU_LSUESR_CERR_MASK)
+		dev_err(edac_dev->dev, "One or more correctable error\n");
+	if (val & MEMERR_CPU_LSUESR_MULTCERR_MASK)
+		dev_err(edac_dev->dev, "Multiple correctable error\n");
+	switch (MEMERR_CPU_LSUESR_ERRTYPE_RD(val)) {
+	case 0:
+		dev_err(edac_dev->dev, "Load tag error\n");
+		break;
+	case 1:
+		dev_err(edac_dev->dev, "Load data error\n");
+		break;
+	case 2:
+		dev_err(edac_dev->dev, "WSL multihit error\n");
+		break;
+	case 3:
+		dev_err(edac_dev->dev, "Store tag error\n");
+		break;
+	case 4:
+		dev_err(edac_dev->dev,
+			"DTB multihit from load pipeline error\n");
+		break;
+	case 5:
+		dev_err(edac_dev->dev,
+			"DTB multihit from store pipeline error\n");
+		break;
+	}
+
+	/* Clear any HW errors */
+	writel(val, pg_f + MEMERR_CPU_LSUESR_PAGE_OFFSET);
+
+	if (val & (MEMERR_CPU_LSUESR_CERR_MASK |
+		   MEMERR_CPU_LSUESR_MULTCERR_MASK))
+		edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name);
+
+chk_mmu:
+	val = readl(pg_f + MEMERR_CPU_MMUESR_PAGE_OFFSET);
+	if (!val)
+		return;
+	dev_err(edac_dev->dev,
+		"CPU%d memory error MMU 0x%08X Way 0x%02X Index 0x%02X Info 0x%02X %s\n",
+		ctx->pmd * MAX_CPU_PER_PMD + cpu_idx, val,
+		MEMERR_CPU_MMUESR_ERRWAY_RD(val),
+		MEMERR_CPU_MMUESR_ERRINDEX_RD(val),
+		MEMERR_CPU_MMUESR_ERRINFO_RD(val),
+		val & MEMERR_CPU_MMUESR_ERRREQSTR_LSU_MASK ? "LSU" : "ICF");
+	if (val & MEMERR_CPU_MMUESR_CERR_MASK)
+		dev_err(edac_dev->dev, "One or more correctable error\n");
+	if (val & MEMERR_CPU_MMUESR_MULTCERR_MASK)
+		dev_err(edac_dev->dev, "Multiple correctable error\n");
+	switch (MEMERR_CPU_MMUESR_ERRTYPE_RD(val)) {
+	case 0:
+		dev_err(edac_dev->dev, "Stage 1 UTB hit error\n");
+		break;
+	case 1:
+		dev_err(edac_dev->dev, "Stage 1 UTB miss error\n");
+		break;
+	case 2:
+		dev_err(edac_dev->dev, "Stage 1 UTB allocate error\n");
+		break;
+	case 3:
+		dev_err(edac_dev->dev, "TMO operation single bank error\n");
+		break;
+	case 4:
+		dev_err(edac_dev->dev, "Stage 2 UTB error\n");
+		break;
+	case 5:
+		dev_err(edac_dev->dev, "Stage 2 UTB miss error\n");
+		break;
+	case 6:
+		dev_err(edac_dev->dev, "Stage 2 UTB allocate error\n");
+		break;
+	case 7:
+		dev_err(edac_dev->dev, "TMO operation multiple bank error\n");
+		break;
+	}
+
+	/* Clear any HW errors */
+	writel(val, pg_f + MEMERR_CPU_MMUESR_PAGE_OFFSET);
+
+	edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name);
+}
+
+static void xgene_edac_pmd_l2_check(struct edac_device_ctl_info *edac_dev)
+{
+	struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info;
+	void __iomem *pg_d;
+	void __iomem *pg_e;
+	u32 val_hi;
+	u32 val_lo;
+	u32 val;
+
+	/* Check L2 */
+	pg_e = ctx->pmd_csr + CPU_MEMERR_L2C_PAGE;
+	val = readl(pg_e + MEMERR_L2C_L2ESR_PAGE_OFFSET);
+	if (!val)
+		goto chk_l2c;
+	val_lo = readl(pg_e + MEMERR_L2C_L2EALR_PAGE_OFFSET);
+	val_hi = readl(pg_e + MEMERR_L2C_L2EAHR_PAGE_OFFSET);
+	dev_err(edac_dev->dev,
+		"PMD%d memory error L2C L2ESR 0x%08X @ 0x%08X.%08X\n",
+		ctx->pmd, val, val_hi, val_lo);
+	dev_err(edac_dev->dev,
+		"ErrSyndrome 0x%02X ErrWay 0x%02X ErrCpu %d ErrGroup 0x%02X ErrAction 0x%02X\n",
+		MEMERR_L2C_L2ESR_ERRSYN_RD(val),
+		MEMERR_L2C_L2ESR_ERRWAY_RD(val),
+		MEMERR_L2C_L2ESR_ERRCPU_RD(val),
+		MEMERR_L2C_L2ESR_ERRGROUP_RD(val),
+		MEMERR_L2C_L2ESR_ERRACTION_RD(val));
+
+	if (val & MEMERR_L2C_L2ESR_ERR_MASK)
+		dev_err(edac_dev->dev, "One or more correctable error\n");
+	if (val & MEMERR_L2C_L2ESR_MULTICERR_MASK)
+		dev_err(edac_dev->dev, "Multiple correctable error\n");
+	if (val & MEMERR_L2C_L2ESR_UCERR_MASK)
+		dev_err(edac_dev->dev, "One or more uncorrectable error\n");
+	if (val & MEMERR_L2C_L2ESR_MULTUCERR_MASK)
+		dev_err(edac_dev->dev, "Multiple uncorrectable error\n");
+
+	switch (MEMERR_L2C_L2ESR_ERRTYPE_RD(val)) {
+	case 0:
+		dev_err(edac_dev->dev, "Outbound SDB parity error\n");
+		break;
+	case 1:
+		dev_err(edac_dev->dev, "Inbound SDB parity error\n");
+		break;
+	case 2:
+		dev_err(edac_dev->dev, "Tag ECC error\n");
+		break;
+	case 3:
+		dev_err(edac_dev->dev, "Data ECC error\n");
+		break;
+	}
+
+	/* Clear any HW errors */
+	writel(val, pg_e + MEMERR_L2C_L2ESR_PAGE_OFFSET);
+
+	if (val & (MEMERR_L2C_L2ESR_ERR_MASK |
+		   MEMERR_L2C_L2ESR_MULTICERR_MASK))
+		edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name);
+	if (val & (MEMERR_L2C_L2ESR_UCERR_MASK |
+		   MEMERR_L2C_L2ESR_MULTUCERR_MASK))
+		edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name);
+
+chk_l2c:
+	/* Check if any memory request timed out on L2 cache */
+	pg_d = ctx->pmd_csr + CPU_L2C_PAGE;
+	val = readl(pg_d + CPUX_L2C_L2RTOSR_PAGE_OFFSET);
+	if (val) {
+		val_lo = readl(pg_d + CPUX_L2C_L2RTOALR_PAGE_OFFSET);
+		val_hi = readl(pg_d + CPUX_L2C_L2RTOAHR_PAGE_OFFSET);
+		dev_err(edac_dev->dev,
+			"PMD%d L2C error L2C RTOSR 0x%08X @ 0x%08X.%08X\n",
+			ctx->pmd, val, val_hi, val_lo);
+		writel(val, pg_d + CPUX_L2C_L2RTOSR_PAGE_OFFSET);
+	}
+}
+
+static void xgene_edac_pmd_check(struct edac_device_ctl_info *edac_dev)
+{
+	struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info;
+	unsigned int pcp_hp_stat;
+	int i;
+
+	xgene_edac_pcp_rd(ctx->edac, PCPHPERRINTSTS, &pcp_hp_stat);
+	if (!((PMD0_MERR_MASK << ctx->pmd) & pcp_hp_stat))
+		return;
+
+	/* Check CPU L1 error */
+	for (i = 0; i < MAX_CPU_PER_PMD; i++)
+		xgene_edac_pmd_l1_check(edac_dev, i);
+
+	/* Check CPU L2 error */
+	xgene_edac_pmd_l2_check(edac_dev);
+}
+
+static void xgene_edac_pmd_cpu_hw_cfg(struct edac_device_ctl_info *edac_dev,
+				      int cpu)
+{
+	struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info;
+	void __iomem *pg_f = ctx->pmd_csr + cpu * CPU_CSR_STRIDE +
+			     CPU_MEMERR_CPU_PAGE;
+
+	/*
+	 * Enable CPU memory error:
+	 *  MEMERR_CPU_ICFESRA, MEMERR_CPU_LSUESRA, and MEMERR_CPU_MMUESRA
+	 */
+	writel(0x00000301, pg_f + MEMERR_CPU_ICFECR_PAGE_OFFSET);
+	writel(0x00000301, pg_f + MEMERR_CPU_LSUECR_PAGE_OFFSET);
+	writel(0x00000101, pg_f + MEMERR_CPU_MMUECR_PAGE_OFFSET);
+}
+
+static void xgene_edac_pmd_hw_cfg(struct edac_device_ctl_info *edac_dev)
+{
+	struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info;
+	void __iomem *pg_d = ctx->pmd_csr + CPU_L2C_PAGE;
+	void __iomem *pg_e = ctx->pmd_csr + CPU_MEMERR_L2C_PAGE;
+
+	/* Enable PMD memory error - MEMERR_L2C_L2ECR and L2C_L2RTOCR */
+	writel(0x00000703, pg_e + MEMERR_L2C_L2ECR_PAGE_OFFSET);
+	/* Configure L2C HW request time out feature if supported */
+	if (ctx->version > 1)
+		writel(0x00000119, pg_d + CPUX_L2C_L2RTOCR_PAGE_OFFSET);
+}
+
+static void xgene_edac_pmd_hw_ctl(struct edac_device_ctl_info *edac_dev,
+				  bool enable)
+{
+	struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info;
+	int i;
+
+	/* Enable PMD error interrupt */
+	if (edac_dev->op_state == OP_RUNNING_INTERRUPT) {
+		if (enable)
+			xgene_edac_pcp_clrbits(ctx->edac, PCPHPERRINTMSK,
+					       PMD0_MERR_MASK << ctx->pmd);
+		else
+			xgene_edac_pcp_setbits(ctx->edac, PCPHPERRINTMSK,
+					       PMD0_MERR_MASK << ctx->pmd);
+	}
+
+	if (enable) {
+		xgene_edac_pmd_hw_cfg(edac_dev);
+
+		/* Two CPUs per a PMD */
+		for (i = 0; i < MAX_CPU_PER_PMD; i++)
+			xgene_edac_pmd_cpu_hw_cfg(edac_dev, i);
+	}
+}
+
+static ssize_t xgene_edac_pmd_l1_inject_ctrl_write(struct file *file,
+						   const char __user *data,
+						   size_t count, loff_t *ppos)
+{
+	struct edac_device_ctl_info *edac_dev = file->private_data;
+	struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info;
+	void __iomem *cpux_pg_f;
+	int i;
+
+	for (i = 0; i < MAX_CPU_PER_PMD; i++) {
+		cpux_pg_f = ctx->pmd_csr + i * CPU_CSR_STRIDE +
+			    CPU_MEMERR_CPU_PAGE;
+
+		writel(MEMERR_CPU_ICFESR_MULTCERR_MASK |
+		       MEMERR_CPU_ICFESR_CERR_MASK,
+		       cpux_pg_f + MEMERR_CPU_ICFESRA_PAGE_OFFSET);
+		writel(MEMERR_CPU_LSUESR_MULTCERR_MASK |
+		       MEMERR_CPU_LSUESR_CERR_MASK,
+		       cpux_pg_f + MEMERR_CPU_LSUESRA_PAGE_OFFSET);
+		writel(MEMERR_CPU_MMUESR_MULTCERR_MASK |
+		       MEMERR_CPU_MMUESR_CERR_MASK,
+		       cpux_pg_f + MEMERR_CPU_MMUESRA_PAGE_OFFSET);
+	}
+	return count;
+}
+
+static ssize_t xgene_edac_pmd_l2_inject_ctrl_write(struct file *file,
+						   const char __user *data,
+						   size_t count, loff_t *ppos)
+{
+	struct edac_device_ctl_info *edac_dev = file->private_data;
+	struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info;
+	void __iomem *pg_e = ctx->pmd_csr + CPU_MEMERR_L2C_PAGE;
+
+	writel(MEMERR_L2C_L2ESR_MULTUCERR_MASK |
+	       MEMERR_L2C_L2ESR_MULTICERR_MASK |
+	       MEMERR_L2C_L2ESR_UCERR_MASK |
+	       MEMERR_L2C_L2ESR_ERR_MASK,
+	       pg_e + MEMERR_L2C_L2ESRA_PAGE_OFFSET);
+	return count;
+}
+
+static const struct file_operations xgene_edac_pmd_debug_inject_fops[] = {
+	{
+	.open = simple_open,
+	.write = xgene_edac_pmd_l1_inject_ctrl_write,
+	.llseek = generic_file_llseek, },
+	{
+	.open = simple_open,
+	.write = xgene_edac_pmd_l2_inject_ctrl_write,
+	.llseek = generic_file_llseek, },
+	{ }
+};
+
+static void
+xgene_edac_pmd_create_debugfs_nodes(struct edac_device_ctl_info *edac_dev)
+{
+	struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info;
+	struct dentry *dbgfs_dir;
+	char name[10];
+
+	if (!IS_ENABLED(CONFIG_EDAC_DEBUG) || !ctx->edac->dfs)
+		return;
+
+	snprintf(name, sizeof(name), "PMD%d", ctx->pmd);
+	dbgfs_dir = edac_debugfs_create_dir_at(name, ctx->edac->dfs);
+	if (!dbgfs_dir)
+		return;
+
+	edac_debugfs_create_file("l1_inject_ctrl", S_IWUSR, dbgfs_dir, edac_dev,
+				 &xgene_edac_pmd_debug_inject_fops[0]);
+	edac_debugfs_create_file("l2_inject_ctrl", S_IWUSR, dbgfs_dir, edac_dev,
+				 &xgene_edac_pmd_debug_inject_fops[1]);
+}
+
+static int xgene_edac_pmd_available(u32 efuse, int pmd)
+{
+	return (efuse & (1 << pmd)) ? 0 : 1;
+}
+
+static int xgene_edac_pmd_add(struct xgene_edac *edac, struct device_node *np,
+			      int version)
+{
+	struct edac_device_ctl_info *edac_dev;
+	struct xgene_edac_pmd_ctx *ctx;
+	struct resource res;
+	char edac_name[10];
+	u32 pmd;
+	int rc;
+	u32 val;
+
+	if (!devres_open_group(edac->dev, xgene_edac_pmd_add, GFP_KERNEL))
+		return -ENOMEM;
+
+	/* Determine if this PMD is disabled */
+	if (of_property_read_u32(np, "pmd-controller", &pmd)) {
+		dev_err(edac->dev, "no pmd-controller property\n");
+		rc = -ENODEV;
+		goto err_group;
+	}
+	rc = regmap_read(edac->efuse_map, 0, &val);
+	if (rc)
+		goto err_group;
+	if (!xgene_edac_pmd_available(val, pmd)) {
+		rc = -ENODEV;
+		goto err_group;
+	}
+
+	snprintf(edac_name, sizeof(edac_name), "l2c%d", pmd);
+	edac_dev = edac_device_alloc_ctl_info(sizeof(*ctx),
+					      edac_name, 1, "l2c", 1, 2, NULL,
+					      0, edac_device_alloc_index());
+	if (!edac_dev) {
+		rc = -ENOMEM;
+		goto err_group;
+	}
+
+	ctx = edac_dev->pvt_info;
+	ctx->name = "xgene_pmd_err";
+	ctx->pmd = pmd;
+	ctx->edac = edac;
+	ctx->edac_dev = edac_dev;
+	ctx->ddev = *edac->dev;
+	ctx->version = version;
+	edac_dev->dev = &ctx->ddev;
+	edac_dev->ctl_name = ctx->name;
+	edac_dev->dev_name = ctx->name;
+	edac_dev->mod_name = EDAC_MOD_STR;
+
+	rc = of_address_to_resource(np, 0, &res);
+	if (rc < 0) {
+		dev_err(edac->dev, "no PMD resource address\n");
+		goto err_free;
+	}
+	ctx->pmd_csr = devm_ioremap_resource(edac->dev, &res);
+	if (IS_ERR(ctx->pmd_csr)) {
+		dev_err(edac->dev,
+			"devm_ioremap_resource failed for PMD resource address\n");
+		rc = PTR_ERR(ctx->pmd_csr);
+		goto err_free;
+	}
+
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		edac_dev->edac_check = xgene_edac_pmd_check;
+
+	xgene_edac_pmd_create_debugfs_nodes(edac_dev);
+
+	rc = edac_device_add_device(edac_dev);
+	if (rc > 0) {
+		dev_err(edac->dev, "edac_device_add_device failed\n");
+		rc = -ENOMEM;
+		goto err_free;
+	}
+
+	if (edac_op_state == EDAC_OPSTATE_INT)
+		edac_dev->op_state = OP_RUNNING_INTERRUPT;
+
+	list_add(&ctx->next, &edac->pmds);
+
+	xgene_edac_pmd_hw_ctl(edac_dev, 1);
+
+	devres_remove_group(edac->dev, xgene_edac_pmd_add);
+
+	dev_info(edac->dev, "X-Gene EDAC PMD%d registered\n", ctx->pmd);
+	return 0;
+
+err_free:
+	edac_device_free_ctl_info(edac_dev);
+err_group:
+	devres_release_group(edac->dev, xgene_edac_pmd_add);
+	return rc;
+}
+
+static int xgene_edac_pmd_remove(struct xgene_edac_pmd_ctx *pmd)
+{
+	struct edac_device_ctl_info *edac_dev = pmd->edac_dev;
+
+	xgene_edac_pmd_hw_ctl(edac_dev, 0);
+	edac_device_del_device(edac_dev->dev);
+	edac_device_free_ctl_info(edac_dev);
+	return 0;
+}
+
+/* L3 Error device */
+#define L3C_ESR				(0x0A * 4)
+#define  L3C_ESR_DATATAG_MASK		BIT(9)
+#define  L3C_ESR_MULTIHIT_MASK		BIT(8)
+#define  L3C_ESR_UCEVICT_MASK		BIT(6)
+#define  L3C_ESR_MULTIUCERR_MASK	BIT(5)
+#define  L3C_ESR_MULTICERR_MASK		BIT(4)
+#define  L3C_ESR_UCERR_MASK		BIT(3)
+#define  L3C_ESR_CERR_MASK		BIT(2)
+#define  L3C_ESR_UCERRINTR_MASK		BIT(1)
+#define  L3C_ESR_CERRINTR_MASK		BIT(0)
+#define L3C_ECR				(0x0B * 4)
+#define  L3C_ECR_UCINTREN		BIT(3)
+#define  L3C_ECR_CINTREN		BIT(2)
+#define  L3C_UCERREN			BIT(1)
+#define  L3C_CERREN			BIT(0)
+#define L3C_ELR				(0x0C * 4)
+#define  L3C_ELR_ERRSYN(src)		((src & 0xFF800000) >> 23)
+#define  L3C_ELR_ERRWAY(src)		((src & 0x007E0000) >> 17)
+#define  L3C_ELR_AGENTID(src)		((src & 0x0001E000) >> 13)
+#define  L3C_ELR_ERRGRP(src)		((src & 0x00000F00) >> 8)
+#define  L3C_ELR_OPTYPE(src)		((src & 0x000000F0) >> 4)
+#define  L3C_ELR_PADDRHIGH(src)		(src & 0x0000000F)
+#define L3C_AELR			(0x0D * 4)
+#define L3C_BELR			(0x0E * 4)
+#define  L3C_BELR_BANK(src)		(src & 0x0000000F)
+
+struct xgene_edac_dev_ctx {
+	struct list_head	next;
+	struct device		ddev;
+	char			*name;
+	struct xgene_edac	*edac;
+	struct edac_device_ctl_info *edac_dev;
+	int			edac_idx;
+	void __iomem		*dev_csr;
+	int			version;
+};
+
+/*
+ * Version 1 of the L3 controller has broken single bit correctable logic for
+ * certain error syndromes. Log them as uncorrectable in that case.
+ */
+static bool xgene_edac_l3_promote_to_uc_err(u32 l3cesr, u32 l3celr)
+{
+	if (l3cesr & L3C_ESR_DATATAG_MASK) {
+		switch (L3C_ELR_ERRSYN(l3celr)) {
+		case 0x13C:
+		case 0x0B4:
+		case 0x007:
+		case 0x00D:
+		case 0x00E:
+		case 0x019:
+		case 0x01A:
+		case 0x01C:
+		case 0x04E:
+		case 0x041:
+			return true;
+		}
+	} else if (L3C_ELR_ERRWAY(l3celr) == 9)
+		return true;
+
+	return false;
+}
+
+static void xgene_edac_l3_check(struct edac_device_ctl_info *edac_dev)
+{
+	struct xgene_edac_dev_ctx *ctx = edac_dev->pvt_info;
+	u32 l3cesr;
+	u32 l3celr;
+	u32 l3caelr;
+	u32 l3cbelr;
+
+	l3cesr = readl(ctx->dev_csr + L3C_ESR);
+	if (!(l3cesr & (L3C_ESR_UCERR_MASK | L3C_ESR_CERR_MASK)))
+		return;
+
+	if (l3cesr & L3C_ESR_UCERR_MASK)
+		dev_err(edac_dev->dev, "L3C uncorrectable error\n");
+	if (l3cesr & L3C_ESR_CERR_MASK)
+		dev_warn(edac_dev->dev, "L3C correctable error\n");
+
+	l3celr = readl(ctx->dev_csr + L3C_ELR);
+	l3caelr = readl(ctx->dev_csr + L3C_AELR);
+	l3cbelr = readl(ctx->dev_csr + L3C_BELR);
+	if (l3cesr & L3C_ESR_MULTIHIT_MASK)
+		dev_err(edac_dev->dev, "L3C multiple hit error\n");
+	if (l3cesr & L3C_ESR_UCEVICT_MASK)
+		dev_err(edac_dev->dev,
+			"L3C dropped eviction of line with error\n");
+	if (l3cesr & L3C_ESR_MULTIUCERR_MASK)
+		dev_err(edac_dev->dev, "L3C multiple uncorrectable error\n");
+	if (l3cesr & L3C_ESR_DATATAG_MASK)
+		dev_err(edac_dev->dev,
+			"L3C data error syndrome 0x%X group 0x%X\n",
+			L3C_ELR_ERRSYN(l3celr), L3C_ELR_ERRGRP(l3celr));
+	else
+		dev_err(edac_dev->dev,
+			"L3C tag error syndrome 0x%X Way of Tag 0x%X Agent ID 0x%X Operation type 0x%X\n",
+			L3C_ELR_ERRSYN(l3celr), L3C_ELR_ERRWAY(l3celr),
+			L3C_ELR_AGENTID(l3celr), L3C_ELR_OPTYPE(l3celr));
+	/*
+	 * NOTE: Address [41:38] in L3C_ELR_PADDRHIGH(l3celr).
+	 *       Address [37:6] in l3caelr. Lower 6 bits are zero.
+	 */
+	dev_err(edac_dev->dev, "L3C error address 0x%08X.%08X bank %d\n",
+		L3C_ELR_PADDRHIGH(l3celr) << 6 | (l3caelr >> 26),
+		(l3caelr & 0x3FFFFFFF) << 6, L3C_BELR_BANK(l3cbelr));
+	dev_err(edac_dev->dev,
+		"L3C error status register value 0x%X\n", l3cesr);
+
+	/* Clear L3C error interrupt */
+	writel(0, ctx->dev_csr + L3C_ESR);
+
+	if (ctx->version <= 1 &&
+	    xgene_edac_l3_promote_to_uc_err(l3cesr, l3celr)) {
+		edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name);
+		return;
+	}
+	if (l3cesr & L3C_ESR_CERR_MASK)
+		edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name);
+	if (l3cesr & L3C_ESR_UCERR_MASK)
+		edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name);
+}
+
+static void xgene_edac_l3_hw_init(struct edac_device_ctl_info *edac_dev,
+				  bool enable)
+{
+	struct xgene_edac_dev_ctx *ctx = edac_dev->pvt_info;
+	u32 val;
+
+	val = readl(ctx->dev_csr + L3C_ECR);
+	val |= L3C_UCERREN | L3C_CERREN;
+	/* On disable, we just disable interrupt but keep error enabled */
+	if (edac_dev->op_state == OP_RUNNING_INTERRUPT) {
+		if (enable)
+			val |= L3C_ECR_UCINTREN | L3C_ECR_CINTREN;
+		else
+			val &= ~(L3C_ECR_UCINTREN | L3C_ECR_CINTREN);
+	}
+	writel(val, ctx->dev_csr + L3C_ECR);
+
+	if (edac_dev->op_state == OP_RUNNING_INTERRUPT) {
+		/* Enable/disable L3 error top level interrupt */
+		if (enable) {
+			xgene_edac_pcp_clrbits(ctx->edac, PCPHPERRINTMSK,
+					       L3C_UNCORR_ERR_MASK);
+			xgene_edac_pcp_clrbits(ctx->edac, PCPLPERRINTMSK,
+					       L3C_CORR_ERR_MASK);
+		} else {
+			xgene_edac_pcp_setbits(ctx->edac, PCPHPERRINTMSK,
+					       L3C_UNCORR_ERR_MASK);
+			xgene_edac_pcp_setbits(ctx->edac, PCPLPERRINTMSK,
+					       L3C_CORR_ERR_MASK);
+		}
+	}
+}
+
+static ssize_t xgene_edac_l3_inject_ctrl_write(struct file *file,
+					       const char __user *data,
+					       size_t count, loff_t *ppos)
+{
+	struct edac_device_ctl_info *edac_dev = file->private_data;
+	struct xgene_edac_dev_ctx *ctx = edac_dev->pvt_info;
+
+	/* Generate all errors */
+	writel(0xFFFFFFFF, ctx->dev_csr + L3C_ESR);
+	return count;
+}
+
+static const struct file_operations xgene_edac_l3_debug_inject_fops = {
+	.open = simple_open,
+	.write = xgene_edac_l3_inject_ctrl_write,
+	.llseek = generic_file_llseek
+};
+
+static void
+xgene_edac_l3_create_debugfs_nodes(struct edac_device_ctl_info *edac_dev)
+{
+	struct xgene_edac_dev_ctx *ctx = edac_dev->pvt_info;
+	struct dentry *dbgfs_dir;
+	char name[10];
+
+	if (!IS_ENABLED(CONFIG_EDAC_DEBUG) || !ctx->edac->dfs)
+		return;
+
+	snprintf(name, sizeof(name), "l3c%d", ctx->edac_idx);
+	dbgfs_dir = edac_debugfs_create_dir_at(name, ctx->edac->dfs);
+	if (!dbgfs_dir)
+		return;
+
+	debugfs_create_file("l3_inject_ctrl", S_IWUSR, dbgfs_dir, edac_dev,
+			    &xgene_edac_l3_debug_inject_fops);
+}
+
+static int xgene_edac_l3_add(struct xgene_edac *edac, struct device_node *np,
+			     int version)
+{
+	struct edac_device_ctl_info *edac_dev;
+	struct xgene_edac_dev_ctx *ctx;
+	struct resource res;
+	void __iomem *dev_csr;
+	int edac_idx;
+	int rc = 0;
+
+	if (!devres_open_group(edac->dev, xgene_edac_l3_add, GFP_KERNEL))
+		return -ENOMEM;
+
+	rc = of_address_to_resource(np, 0, &res);
+	if (rc < 0) {
+		dev_err(edac->dev, "no L3 resource address\n");
+		goto err_release_group;
+	}
+	dev_csr = devm_ioremap_resource(edac->dev, &res);
+	if (IS_ERR(dev_csr)) {
+		dev_err(edac->dev,
+			"devm_ioremap_resource failed for L3 resource address\n");
+		rc = PTR_ERR(dev_csr);
+		goto err_release_group;
+	}
+
+	edac_idx = edac_device_alloc_index();
+	edac_dev = edac_device_alloc_ctl_info(sizeof(*ctx),
+					      "l3c", 1, "l3c", 1, 0, NULL, 0,
+					      edac_idx);
+	if (!edac_dev) {
+		rc = -ENOMEM;
+		goto err_release_group;
+	}
+
+	ctx = edac_dev->pvt_info;
+	ctx->dev_csr = dev_csr;
+	ctx->name = "xgene_l3_err";
+	ctx->edac_idx = edac_idx;
+	ctx->edac = edac;
+	ctx->edac_dev = edac_dev;
+	ctx->ddev = *edac->dev;
+	ctx->version = version;
+	edac_dev->dev = &ctx->ddev;
+	edac_dev->ctl_name = ctx->name;
+	edac_dev->dev_name = ctx->name;
+	edac_dev->mod_name = EDAC_MOD_STR;
+
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		edac_dev->edac_check = xgene_edac_l3_check;
+
+	xgene_edac_l3_create_debugfs_nodes(edac_dev);
+
+	rc = edac_device_add_device(edac_dev);
+	if (rc > 0) {
+		dev_err(edac->dev, "failed edac_device_add_device()\n");
+		rc = -ENOMEM;
+		goto err_ctl_free;
+	}
+
+	if (edac_op_state == EDAC_OPSTATE_INT)
+		edac_dev->op_state = OP_RUNNING_INTERRUPT;
+
+	list_add(&ctx->next, &edac->l3s);
+
+	xgene_edac_l3_hw_init(edac_dev, 1);
+
+	devres_remove_group(edac->dev, xgene_edac_l3_add);
+
+	dev_info(edac->dev, "X-Gene EDAC L3 registered\n");
+	return 0;
+
+err_ctl_free:
+	edac_device_free_ctl_info(edac_dev);
+err_release_group:
+	devres_release_group(edac->dev, xgene_edac_l3_add);
+	return rc;
+}
+
+static int xgene_edac_l3_remove(struct xgene_edac_dev_ctx *l3)
+{
+	struct edac_device_ctl_info *edac_dev = l3->edac_dev;
+
+	xgene_edac_l3_hw_init(edac_dev, 0);
+	edac_device_del_device(l3->edac->dev);
+	edac_device_free_ctl_info(edac_dev);
+	return 0;
+}
+
+/* SoC error device */
+#define IOBAXIS0TRANSERRINTSTS		0x0000
+#define  IOBAXIS0_M_ILLEGAL_ACCESS_MASK	BIT(1)
+#define  IOBAXIS0_ILLEGAL_ACCESS_MASK	BIT(0)
+#define IOBAXIS0TRANSERRINTMSK		0x0004
+#define IOBAXIS0TRANSERRREQINFOL	0x0008
+#define IOBAXIS0TRANSERRREQINFOH	0x000c
+#define  REQTYPE_RD(src)		(((src) & BIT(0)))
+#define  ERRADDRH_RD(src)		(((src) & 0xffc00000) >> 22)
+#define IOBAXIS1TRANSERRINTSTS		0x0010
+#define IOBAXIS1TRANSERRINTMSK		0x0014
+#define IOBAXIS1TRANSERRREQINFOL	0x0018
+#define IOBAXIS1TRANSERRREQINFOH	0x001c
+#define IOBPATRANSERRINTSTS		0x0020
+#define  IOBPA_M_REQIDRAM_CORRUPT_MASK	BIT(7)
+#define  IOBPA_REQIDRAM_CORRUPT_MASK	BIT(6)
+#define  IOBPA_M_TRANS_CORRUPT_MASK	BIT(5)
+#define  IOBPA_TRANS_CORRUPT_MASK	BIT(4)
+#define  IOBPA_M_WDATA_CORRUPT_MASK	BIT(3)
+#define  IOBPA_WDATA_CORRUPT_MASK	BIT(2)
+#define  IOBPA_M_RDATA_CORRUPT_MASK	BIT(1)
+#define  IOBPA_RDATA_CORRUPT_MASK	BIT(0)
+#define IOBBATRANSERRINTSTS		0x0030
+#define  M_ILLEGAL_ACCESS_MASK		BIT(15)
+#define  ILLEGAL_ACCESS_MASK		BIT(14)
+#define  M_WIDRAM_CORRUPT_MASK		BIT(13)
+#define  WIDRAM_CORRUPT_MASK		BIT(12)
+#define  M_RIDRAM_CORRUPT_MASK		BIT(11)
+#define  RIDRAM_CORRUPT_MASK		BIT(10)
+#define  M_TRANS_CORRUPT_MASK		BIT(9)
+#define  TRANS_CORRUPT_MASK		BIT(8)
+#define  M_WDATA_CORRUPT_MASK		BIT(7)
+#define  WDATA_CORRUPT_MASK		BIT(6)
+#define  M_RBM_POISONED_REQ_MASK	BIT(5)
+#define  RBM_POISONED_REQ_MASK		BIT(4)
+#define  M_XGIC_POISONED_REQ_MASK	BIT(3)
+#define  XGIC_POISONED_REQ_MASK		BIT(2)
+#define  M_WRERR_RESP_MASK		BIT(1)
+#define  WRERR_RESP_MASK		BIT(0)
+#define IOBBATRANSERRREQINFOL		0x0038
+#define IOBBATRANSERRREQINFOH		0x003c
+#define  REQTYPE_F2_RD(src)		((src) & BIT(0))
+#define  ERRADDRH_F2_RD(src)		(((src) & 0xffc00000) >> 22)
+#define IOBBATRANSERRCSWREQID		0x0040
+#define XGICTRANSERRINTSTS		0x0050
+#define  M_WR_ACCESS_ERR_MASK		BIT(3)
+#define  WR_ACCESS_ERR_MASK		BIT(2)
+#define  M_RD_ACCESS_ERR_MASK		BIT(1)
+#define  RD_ACCESS_ERR_MASK		BIT(0)
+#define XGICTRANSERRINTMSK		0x0054
+#define XGICTRANSERRREQINFO		0x0058
+#define  REQTYPE_MASK			BIT(26)
+#define  ERRADDR_RD(src)		((src) & 0x03ffffff)
+#define GLBL_ERR_STS			0x0800
+#define  MDED_ERR_MASK			BIT(3)
+#define  DED_ERR_MASK			BIT(2)
+#define  MSEC_ERR_MASK			BIT(1)
+#define  SEC_ERR_MASK			BIT(0)
+#define GLBL_SEC_ERRL			0x0810
+#define GLBL_SEC_ERRH			0x0818
+#define GLBL_MSEC_ERRL			0x0820
+#define GLBL_MSEC_ERRH			0x0828
+#define GLBL_DED_ERRL			0x0830
+#define GLBL_DED_ERRLMASK		0x0834
+#define GLBL_DED_ERRH			0x0838
+#define GLBL_DED_ERRHMASK		0x083c
+#define GLBL_MDED_ERRL			0x0840
+#define GLBL_MDED_ERRLMASK		0x0844
+#define GLBL_MDED_ERRH			0x0848
+#define GLBL_MDED_ERRHMASK		0x084c
+
+/* IO Bus Registers */
+#define RBCSR				0x0000
+#define STICKYERR_MASK			BIT(0)
+#define RBEIR				0x0008
+#define AGENT_OFFLINE_ERR_MASK		BIT(30)
+#define UNIMPL_RBPAGE_ERR_MASK		BIT(29)
+#define WORD_ALIGNED_ERR_MASK		BIT(28)
+#define PAGE_ACCESS_ERR_MASK		BIT(27)
+#define WRITE_ACCESS_MASK		BIT(26)
+#define RBERRADDR_RD(src)		((src) & 0x03FFFFFF)
+
+static const char * const soc_mem_err_v1[] = {
+	"10GbE0",
+	"10GbE1",
+	"Security",
+	"SATA45",
+	"SATA23/ETH23",
+	"SATA01/ETH01",
+	"USB1",
+	"USB0",
+	"QML",
+	"QM0",
+	"QM1 (XGbE01)",
+	"PCIE4",
+	"PCIE3",
+	"PCIE2",
+	"PCIE1",
+	"PCIE0",
+	"CTX Manager",
+	"OCM",
+	"1GbE",
+	"CLE",
+	"AHBC",
+	"PktDMA",
+	"GFC",
+	"MSLIM",
+	"10GbE2",
+	"10GbE3",
+	"QM2 (XGbE23)",
+	"IOB",
+	"unknown",
+	"unknown",
+	"unknown",
+	"unknown",
+};
+
+static void xgene_edac_iob_gic_report(struct edac_device_ctl_info *edac_dev)
+{
+	struct xgene_edac_dev_ctx *ctx = edac_dev->pvt_info;
+	u32 err_addr_lo;
+	u32 err_addr_hi;
+	u32 reg;
+	u32 info;
+
+	/* GIC transaction error interrupt */
+	reg = readl(ctx->dev_csr + XGICTRANSERRINTSTS);
+	if (!reg)
+		goto chk_iob_err;
+	dev_err(edac_dev->dev, "XGIC transaction error\n");
+	if (reg & RD_ACCESS_ERR_MASK)
+		dev_err(edac_dev->dev, "XGIC read size error\n");
+	if (reg & M_RD_ACCESS_ERR_MASK)
+		dev_err(edac_dev->dev, "Multiple XGIC read size error\n");
+	if (reg & WR_ACCESS_ERR_MASK)
+		dev_err(edac_dev->dev, "XGIC write size error\n");
+	if (reg & M_WR_ACCESS_ERR_MASK)
+		dev_err(edac_dev->dev, "Multiple XGIC write size error\n");
+	info = readl(ctx->dev_csr + XGICTRANSERRREQINFO);
+	dev_err(edac_dev->dev, "XGIC %s access @ 0x%08X (0x%08X)\n",
+		info & REQTYPE_MASK ? "read" : "write", ERRADDR_RD(info),
+		info);
+	writel(reg, ctx->dev_csr + XGICTRANSERRINTSTS);
+
+chk_iob_err:
+	/* IOB memory error */
+	reg = readl(ctx->dev_csr + GLBL_ERR_STS);
+	if (!reg)
+		return;
+	if (reg & SEC_ERR_MASK) {
+		err_addr_lo = readl(ctx->dev_csr + GLBL_SEC_ERRL);
+		err_addr_hi = readl(ctx->dev_csr + GLBL_SEC_ERRH);
+		dev_err(edac_dev->dev,
+			"IOB single-bit correctable memory at 0x%08X.%08X error\n",
+			err_addr_lo, err_addr_hi);
+		writel(err_addr_lo, ctx->dev_csr + GLBL_SEC_ERRL);
+		writel(err_addr_hi, ctx->dev_csr + GLBL_SEC_ERRH);
+	}
+	if (reg & MSEC_ERR_MASK) {
+		err_addr_lo = readl(ctx->dev_csr + GLBL_MSEC_ERRL);
+		err_addr_hi = readl(ctx->dev_csr + GLBL_MSEC_ERRH);
+		dev_err(edac_dev->dev,
+			"IOB multiple single-bit correctable memory at 0x%08X.%08X error\n",
+			err_addr_lo, err_addr_hi);
+		writel(err_addr_lo, ctx->dev_csr + GLBL_MSEC_ERRL);
+		writel(err_addr_hi, ctx->dev_csr + GLBL_MSEC_ERRH);
+	}
+	if (reg & (SEC_ERR_MASK | MSEC_ERR_MASK))
+		edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name);
+
+	if (reg & DED_ERR_MASK) {
+		err_addr_lo = readl(ctx->dev_csr + GLBL_DED_ERRL);
+		err_addr_hi = readl(ctx->dev_csr + GLBL_DED_ERRH);
+		dev_err(edac_dev->dev,
+			"IOB double-bit uncorrectable memory at 0x%08X.%08X error\n",
+			err_addr_lo, err_addr_hi);
+		writel(err_addr_lo, ctx->dev_csr + GLBL_DED_ERRL);
+		writel(err_addr_hi, ctx->dev_csr + GLBL_DED_ERRH);
+	}
+	if (reg & MDED_ERR_MASK) {
+		err_addr_lo = readl(ctx->dev_csr + GLBL_MDED_ERRL);
+		err_addr_hi = readl(ctx->dev_csr + GLBL_MDED_ERRH);
+		dev_err(edac_dev->dev,
+			"Multiple IOB double-bit uncorrectable memory at 0x%08X.%08X error\n",
+			err_addr_lo, err_addr_hi);
+		writel(err_addr_lo, ctx->dev_csr + GLBL_MDED_ERRL);
+		writel(err_addr_hi, ctx->dev_csr + GLBL_MDED_ERRH);
+	}
+	if (reg & (DED_ERR_MASK | MDED_ERR_MASK))
+		edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name);
+}
+
+static void xgene_edac_rb_report(struct edac_device_ctl_info *edac_dev)
+{
+	struct xgene_edac_dev_ctx *ctx = edac_dev->pvt_info;
+	u32 err_addr_lo;
+	u32 err_addr_hi;
+	u32 reg;
+
+	/* If the register bus resource isn't available, just skip it */
+	if (!ctx->edac->rb_map)
+		goto rb_skip;
+
+	/*
+	 * Check RB access errors
+	 * 1. Out of range
+	 * 2. Un-implemented page
+	 * 3. Un-aligned access
+	 * 4. Offline slave IP
+	 */
+	if (regmap_read(ctx->edac->rb_map, RBCSR, &reg))
+		return;
+	if (reg & STICKYERR_MASK) {
+		bool write;
+		u32 address;
+
+		dev_err(edac_dev->dev, "IOB bus access error(s)\n");
+		if (regmap_read(ctx->edac->rb_map, RBEIR, &reg))
+			return;
+		write = reg & WRITE_ACCESS_MASK ? 1 : 0;
+		address = RBERRADDR_RD(reg);
+		if (reg & AGENT_OFFLINE_ERR_MASK)
+			dev_err(edac_dev->dev,
+				"IOB bus %s access to offline agent error\n",
+				write ? "write" : "read");
+		if (reg & UNIMPL_RBPAGE_ERR_MASK)
+			dev_err(edac_dev->dev,
+				"IOB bus %s access to unimplemented page error\n",
+				write ? "write" : "read");
+		if (reg & WORD_ALIGNED_ERR_MASK)
+			dev_err(edac_dev->dev,
+				"IOB bus %s word aligned access error\n",
+				write ? "write" : "read");
+		if (reg & PAGE_ACCESS_ERR_MASK)
+			dev_err(edac_dev->dev,
+				"IOB bus %s to page out of range access error\n",
+				write ? "write" : "read");
+		if (regmap_write(ctx->edac->rb_map, RBEIR, 0))
+			return;
+		if (regmap_write(ctx->edac->rb_map, RBCSR, 0))
+			return;
+	}
+rb_skip:
+
+	/* IOB Bridge agent transaction error interrupt */
+	reg = readl(ctx->dev_csr + IOBBATRANSERRINTSTS);
+	if (!reg)
+		return;
+
+	dev_err(edac_dev->dev, "IOB bridge agent (BA) transaction error\n");
+	if (reg & WRERR_RESP_MASK)
+		dev_err(edac_dev->dev, "IOB BA write response error\n");
+	if (reg & M_WRERR_RESP_MASK)
+		dev_err(edac_dev->dev,
+			"Multiple IOB BA write response error\n");
+	if (reg & XGIC_POISONED_REQ_MASK)
+		dev_err(edac_dev->dev, "IOB BA XGIC poisoned write error\n");
+	if (reg & M_XGIC_POISONED_REQ_MASK)
+		dev_err(edac_dev->dev,
+			"Multiple IOB BA XGIC poisoned write error\n");
+	if (reg & RBM_POISONED_REQ_MASK)
+		dev_err(edac_dev->dev, "IOB BA RBM poisoned write error\n");
+	if (reg & M_RBM_POISONED_REQ_MASK)
+		dev_err(edac_dev->dev,
+			"Multiple IOB BA RBM poisoned write error\n");
+	if (reg & WDATA_CORRUPT_MASK)
+		dev_err(edac_dev->dev, "IOB BA write error\n");
+	if (reg & M_WDATA_CORRUPT_MASK)
+		dev_err(edac_dev->dev, "Multiple IOB BA write error\n");
+	if (reg & TRANS_CORRUPT_MASK)
+		dev_err(edac_dev->dev, "IOB BA transaction error\n");
+	if (reg & M_TRANS_CORRUPT_MASK)
+		dev_err(edac_dev->dev, "Multiple IOB BA transaction error\n");
+	if (reg & RIDRAM_CORRUPT_MASK)
+		dev_err(edac_dev->dev,
+			"IOB BA RDIDRAM read transaction ID error\n");
+	if (reg & M_RIDRAM_CORRUPT_MASK)
+		dev_err(edac_dev->dev,
+			"Multiple IOB BA RDIDRAM read transaction ID error\n");
+	if (reg & WIDRAM_CORRUPT_MASK)
+		dev_err(edac_dev->dev,
+			"IOB BA RDIDRAM write transaction ID error\n");
+	if (reg & M_WIDRAM_CORRUPT_MASK)
+		dev_err(edac_dev->dev,
+			"Multiple IOB BA RDIDRAM write transaction ID error\n");
+	if (reg & ILLEGAL_ACCESS_MASK)
+		dev_err(edac_dev->dev,
+			"IOB BA XGIC/RB illegal access error\n");
+	if (reg & M_ILLEGAL_ACCESS_MASK)
+		dev_err(edac_dev->dev,
+			"Multiple IOB BA XGIC/RB illegal access error\n");
+
+	err_addr_lo = readl(ctx->dev_csr + IOBBATRANSERRREQINFOL);
+	err_addr_hi = readl(ctx->dev_csr + IOBBATRANSERRREQINFOH);
+	dev_err(edac_dev->dev, "IOB BA %s access at 0x%02X.%08X (0x%08X)\n",
+		REQTYPE_F2_RD(err_addr_hi) ? "read" : "write",
+		ERRADDRH_F2_RD(err_addr_hi), err_addr_lo, err_addr_hi);
+	if (reg & WRERR_RESP_MASK)
+		dev_err(edac_dev->dev, "IOB BA requestor ID 0x%08X\n",
+			readl(ctx->dev_csr + IOBBATRANSERRCSWREQID));
+	writel(reg, ctx->dev_csr + IOBBATRANSERRINTSTS);
+}
+
+static void xgene_edac_pa_report(struct edac_device_ctl_info *edac_dev)
+{
+	struct xgene_edac_dev_ctx *ctx = edac_dev->pvt_info;
+	u32 err_addr_lo;
+	u32 err_addr_hi;
+	u32 reg;
+
+	/* IOB Processing agent transaction error interrupt */
+	reg = readl(ctx->dev_csr + IOBPATRANSERRINTSTS);
+	if (!reg)
+		goto chk_iob_axi0;
+	dev_err(edac_dev->dev, "IOB processing agent (PA) transaction error\n");
+	if (reg & IOBPA_RDATA_CORRUPT_MASK)
+		dev_err(edac_dev->dev, "IOB PA read data RAM error\n");
+	if (reg & IOBPA_M_RDATA_CORRUPT_MASK)
+		dev_err(edac_dev->dev,
+			"Multiple IOB PA read data RAM error\n");
+	if (reg & IOBPA_WDATA_CORRUPT_MASK)
+		dev_err(edac_dev->dev, "IOB PA write data RAM error\n");
+	if (reg & IOBPA_M_WDATA_CORRUPT_MASK)
+		dev_err(edac_dev->dev,
+			"Multiple IOB PA write data RAM error\n");
+	if (reg & IOBPA_TRANS_CORRUPT_MASK)
+		dev_err(edac_dev->dev, "IOB PA transaction error\n");
+	if (reg & IOBPA_M_TRANS_CORRUPT_MASK)
+		dev_err(edac_dev->dev, "Multiple IOB PA transaction error\n");
+	if (reg & IOBPA_REQIDRAM_CORRUPT_MASK)
+		dev_err(edac_dev->dev, "IOB PA transaction ID RAM error\n");
+	if (reg & IOBPA_M_REQIDRAM_CORRUPT_MASK)
+		dev_err(edac_dev->dev,
+			"Multiple IOB PA transaction ID RAM error\n");
+	writel(reg, ctx->dev_csr + IOBPATRANSERRINTSTS);
+
+chk_iob_axi0:
+	/* IOB AXI0 Error */
+	reg = readl(ctx->dev_csr + IOBAXIS0TRANSERRINTSTS);
+	if (!reg)
+		goto chk_iob_axi1;
+	err_addr_lo = readl(ctx->dev_csr + IOBAXIS0TRANSERRREQINFOL);
+	err_addr_hi = readl(ctx->dev_csr + IOBAXIS0TRANSERRREQINFOH);
+	dev_err(edac_dev->dev,
+		"%sAXI slave 0 illegal %s access @ 0x%02X.%08X (0x%08X)\n",
+		reg & IOBAXIS0_M_ILLEGAL_ACCESS_MASK ? "Multiple " : "",
+		REQTYPE_RD(err_addr_hi) ? "read" : "write",
+		ERRADDRH_RD(err_addr_hi), err_addr_lo, err_addr_hi);
+	writel(reg, ctx->dev_csr + IOBAXIS0TRANSERRINTSTS);
+
+chk_iob_axi1:
+	/* IOB AXI1 Error */
+	reg = readl(ctx->dev_csr + IOBAXIS1TRANSERRINTSTS);
+	if (!reg)
+		return;
+	err_addr_lo = readl(ctx->dev_csr + IOBAXIS1TRANSERRREQINFOL);
+	err_addr_hi = readl(ctx->dev_csr + IOBAXIS1TRANSERRREQINFOH);
+	dev_err(edac_dev->dev,
+		"%sAXI slave 1 illegal %s access @ 0x%02X.%08X (0x%08X)\n",
+		reg & IOBAXIS0_M_ILLEGAL_ACCESS_MASK ? "Multiple " : "",
+		REQTYPE_RD(err_addr_hi) ? "read" : "write",
+		ERRADDRH_RD(err_addr_hi), err_addr_lo, err_addr_hi);
+	writel(reg, ctx->dev_csr + IOBAXIS1TRANSERRINTSTS);
+}
+
+static void xgene_edac_soc_check(struct edac_device_ctl_info *edac_dev)
+{
+	struct xgene_edac_dev_ctx *ctx = edac_dev->pvt_info;
+	const char * const *soc_mem_err = NULL;
+	u32 pcp_hp_stat;
+	u32 pcp_lp_stat;
+	u32 reg;
+	int i;
+
+	xgene_edac_pcp_rd(ctx->edac, PCPHPERRINTSTS, &pcp_hp_stat);
+	xgene_edac_pcp_rd(ctx->edac, PCPLPERRINTSTS, &pcp_lp_stat);
+	xgene_edac_pcp_rd(ctx->edac, MEMERRINTSTS, &reg);
+	if (!((pcp_hp_stat & (IOB_PA_ERR_MASK | IOB_BA_ERR_MASK |
+			      IOB_XGIC_ERR_MASK | IOB_RB_ERR_MASK)) ||
+	      (pcp_lp_stat & CSW_SWITCH_TRACE_ERR_MASK) || reg))
+		return;
+
+	if (pcp_hp_stat & IOB_XGIC_ERR_MASK)
+		xgene_edac_iob_gic_report(edac_dev);
+
+	if (pcp_hp_stat & (IOB_RB_ERR_MASK | IOB_BA_ERR_MASK))
+		xgene_edac_rb_report(edac_dev);
+
+	if (pcp_hp_stat & IOB_PA_ERR_MASK)
+		xgene_edac_pa_report(edac_dev);
+
+	if (pcp_lp_stat & CSW_SWITCH_TRACE_ERR_MASK) {
+		dev_info(edac_dev->dev,
+			 "CSW switch trace correctable memory parity error\n");
+		edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name);
+	}
+
+	if (!reg)
+		return;
+	if (ctx->version == 1)
+		soc_mem_err = soc_mem_err_v1;
+	if (!soc_mem_err) {
+		dev_err(edac_dev->dev, "SoC memory parity error 0x%08X\n",
+			reg);
+		edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name);
+		return;
+	}
+	for (i = 0; i < 31; i++) {
+		if (reg & (1 << i)) {
+			dev_err(edac_dev->dev, "%s memory parity error\n",
+				soc_mem_err[i]);
+			edac_device_handle_ue(edac_dev, 0, 0,
+					      edac_dev->ctl_name);
+		}
+	}
+}
+
+static void xgene_edac_soc_hw_init(struct edac_device_ctl_info *edac_dev,
+				   bool enable)
+{
+	struct xgene_edac_dev_ctx *ctx = edac_dev->pvt_info;
+
+	/* Enable SoC IP error interrupt */
+	if (edac_dev->op_state == OP_RUNNING_INTERRUPT) {
+		if (enable) {
+			xgene_edac_pcp_clrbits(ctx->edac, PCPHPERRINTMSK,
+					       IOB_PA_ERR_MASK |
+					       IOB_BA_ERR_MASK |
+					       IOB_XGIC_ERR_MASK |
+					       IOB_RB_ERR_MASK);
+			xgene_edac_pcp_clrbits(ctx->edac, PCPLPERRINTMSK,
+					       CSW_SWITCH_TRACE_ERR_MASK);
+		} else {
+			xgene_edac_pcp_setbits(ctx->edac, PCPHPERRINTMSK,
+					       IOB_PA_ERR_MASK |
+					       IOB_BA_ERR_MASK |
+					       IOB_XGIC_ERR_MASK |
+					       IOB_RB_ERR_MASK);
+			xgene_edac_pcp_setbits(ctx->edac, PCPLPERRINTMSK,
+					       CSW_SWITCH_TRACE_ERR_MASK);
+		}
+
+		writel(enable ? 0x0 : 0xFFFFFFFF,
+		       ctx->dev_csr + IOBAXIS0TRANSERRINTMSK);
+		writel(enable ? 0x0 : 0xFFFFFFFF,
+		       ctx->dev_csr + IOBAXIS1TRANSERRINTMSK);
+		writel(enable ? 0x0 : 0xFFFFFFFF,
+		       ctx->dev_csr + XGICTRANSERRINTMSK);
+
+		xgene_edac_pcp_setbits(ctx->edac, MEMERRINTMSK,
+				       enable ? 0x0 : 0xFFFFFFFF);
+	}
+}
+
+static int xgene_edac_soc_add(struct xgene_edac *edac, struct device_node *np,
+			      int version)
+{
+	struct edac_device_ctl_info *edac_dev;
+	struct xgene_edac_dev_ctx *ctx;
+	void __iomem *dev_csr;
+	struct resource res;
+	int edac_idx;
+	int rc;
+
+	if (!devres_open_group(edac->dev, xgene_edac_soc_add, GFP_KERNEL))
+		return -ENOMEM;
+
+	rc = of_address_to_resource(np, 0, &res);
+	if (rc < 0) {
+		dev_err(edac->dev, "no SoC resource address\n");
+		goto err_release_group;
+	}
+	dev_csr = devm_ioremap_resource(edac->dev, &res);
+	if (IS_ERR(dev_csr)) {
+		dev_err(edac->dev,
+			"devm_ioremap_resource failed for soc resource address\n");
+		rc = PTR_ERR(dev_csr);
+		goto err_release_group;
+	}
+
+	edac_idx = edac_device_alloc_index();
+	edac_dev = edac_device_alloc_ctl_info(sizeof(*ctx),
+					      "SOC", 1, "SOC", 1, 2, NULL, 0,
+					      edac_idx);
+	if (!edac_dev) {
+		rc = -ENOMEM;
+		goto err_release_group;
+	}
+
+	ctx = edac_dev->pvt_info;
+	ctx->dev_csr = dev_csr;
+	ctx->name = "xgene_soc_err";
+	ctx->edac_idx = edac_idx;
+	ctx->edac = edac;
+	ctx->edac_dev = edac_dev;
+	ctx->ddev = *edac->dev;
+	ctx->version = version;
+	edac_dev->dev = &ctx->ddev;
+	edac_dev->ctl_name = ctx->name;
+	edac_dev->dev_name = ctx->name;
+	edac_dev->mod_name = EDAC_MOD_STR;
+
+	if (edac_op_state == EDAC_OPSTATE_POLL)
+		edac_dev->edac_check = xgene_edac_soc_check;
+
+	rc = edac_device_add_device(edac_dev);
+	if (rc > 0) {
+		dev_err(edac->dev, "failed edac_device_add_device()\n");
+		rc = -ENOMEM;
+		goto err_ctl_free;
+	}
+
+	if (edac_op_state == EDAC_OPSTATE_INT)
+		edac_dev->op_state = OP_RUNNING_INTERRUPT;
+
+	list_add(&ctx->next, &edac->socs);
+
+	xgene_edac_soc_hw_init(edac_dev, 1);
+
+	devres_remove_group(edac->dev, xgene_edac_soc_add);
+
+	dev_info(edac->dev, "X-Gene EDAC SoC registered\n");
+
+	return 0;
+
+err_ctl_free:
+	edac_device_free_ctl_info(edac_dev);
+err_release_group:
+	devres_release_group(edac->dev, xgene_edac_soc_add);
+	return rc;
+}
+
+static int xgene_edac_soc_remove(struct xgene_edac_dev_ctx *soc)
+{
+	struct edac_device_ctl_info *edac_dev = soc->edac_dev;
+
+	xgene_edac_soc_hw_init(edac_dev, 0);
+	edac_device_del_device(soc->edac->dev);
+	edac_device_free_ctl_info(edac_dev);
+	return 0;
+}
+
+static irqreturn_t xgene_edac_isr(int irq, void *dev_id)
+{
+	struct xgene_edac *ctx = dev_id;
+	struct xgene_edac_pmd_ctx *pmd;
+	struct xgene_edac_dev_ctx *node;
+	unsigned int pcp_hp_stat;
+	unsigned int pcp_lp_stat;
+
+	xgene_edac_pcp_rd(ctx, PCPHPERRINTSTS, &pcp_hp_stat);
+	xgene_edac_pcp_rd(ctx, PCPLPERRINTSTS, &pcp_lp_stat);
+	if ((MCU_UNCORR_ERR_MASK & pcp_hp_stat) ||
+	    (MCU_CTL_ERR_MASK & pcp_hp_stat) ||
+	    (MCU_CORR_ERR_MASK & pcp_lp_stat)) {
+		struct xgene_edac_mc_ctx *mcu;
+
+		list_for_each_entry(mcu, &ctx->mcus, next)
+			xgene_edac_mc_check(mcu->mci);
+	}
+
+	list_for_each_entry(pmd, &ctx->pmds, next) {
+		if ((PMD0_MERR_MASK << pmd->pmd) & pcp_hp_stat)
+			xgene_edac_pmd_check(pmd->edac_dev);
+	}
+
+	list_for_each_entry(node, &ctx->l3s, next)
+		xgene_edac_l3_check(node->edac_dev);
+
+	list_for_each_entry(node, &ctx->socs, next)
+		xgene_edac_soc_check(node->edac_dev);
+
+	return IRQ_HANDLED;
+}
+
+static int xgene_edac_probe(struct platform_device *pdev)
+{
+	struct xgene_edac *edac;
+	struct device_node *child;
+	struct resource *res;
+	int rc;
+
+	edac = devm_kzalloc(&pdev->dev, sizeof(*edac), GFP_KERNEL);
+	if (!edac)
+		return -ENOMEM;
+
+	edac->dev = &pdev->dev;
+	platform_set_drvdata(pdev, edac);
+	INIT_LIST_HEAD(&edac->mcus);
+	INIT_LIST_HEAD(&edac->pmds);
+	INIT_LIST_HEAD(&edac->l3s);
+	INIT_LIST_HEAD(&edac->socs);
+	spin_lock_init(&edac->lock);
+	mutex_init(&edac->mc_lock);
+
+	edac->csw_map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+							"regmap-csw");
+	if (IS_ERR(edac->csw_map)) {
+		dev_err(edac->dev, "unable to get syscon regmap csw\n");
+		rc = PTR_ERR(edac->csw_map);
+		goto out_err;
+	}
+
+	edac->mcba_map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+							 "regmap-mcba");
+	if (IS_ERR(edac->mcba_map)) {
+		dev_err(edac->dev, "unable to get syscon regmap mcba\n");
+		rc = PTR_ERR(edac->mcba_map);
+		goto out_err;
+	}
+
+	edac->mcbb_map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+							 "regmap-mcbb");
+	if (IS_ERR(edac->mcbb_map)) {
+		dev_err(edac->dev, "unable to get syscon regmap mcbb\n");
+		rc = PTR_ERR(edac->mcbb_map);
+		goto out_err;
+	}
+	edac->efuse_map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+							  "regmap-efuse");
+	if (IS_ERR(edac->efuse_map)) {
+		dev_err(edac->dev, "unable to get syscon regmap efuse\n");
+		rc = PTR_ERR(edac->efuse_map);
+		goto out_err;
+	}
+
+	/*
+	 * NOTE: The register bus resource is optional for compatibility
+	 * reason.
+	 */
+	edac->rb_map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+						       "regmap-rb");
+	if (IS_ERR(edac->rb_map)) {
+		dev_warn(edac->dev, "missing syscon regmap rb\n");
+		edac->rb_map = NULL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	edac->pcp_csr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(edac->pcp_csr)) {
+		dev_err(&pdev->dev, "no PCP resource address\n");
+		rc = PTR_ERR(edac->pcp_csr);
+		goto out_err;
+	}
+
+	if (edac_op_state == EDAC_OPSTATE_INT) {
+		int irq;
+		int i;
+
+		for (i = 0; i < 3; i++) {
+			irq = platform_get_irq(pdev, i);
+			if (irq < 0) {
+				dev_err(&pdev->dev, "No IRQ resource\n");
+				rc = irq;
+				goto out_err;
+			}
+			rc = devm_request_irq(&pdev->dev, irq,
+					      xgene_edac_isr, IRQF_SHARED,
+					      dev_name(&pdev->dev), edac);
+			if (rc) {
+				dev_err(&pdev->dev,
+					"Could not request IRQ %d\n", irq);
+				goto out_err;
+			}
+		}
+	}
+
+	edac->dfs = edac_debugfs_create_dir(pdev->dev.kobj.name);
+
+	for_each_child_of_node(pdev->dev.of_node, child) {
+		if (!of_device_is_available(child))
+			continue;
+		if (of_device_is_compatible(child, "apm,xgene-edac-mc"))
+			xgene_edac_mc_add(edac, child);
+		if (of_device_is_compatible(child, "apm,xgene-edac-pmd"))
+			xgene_edac_pmd_add(edac, child, 1);
+		if (of_device_is_compatible(child, "apm,xgene-edac-pmd-v2"))
+			xgene_edac_pmd_add(edac, child, 2);
+		if (of_device_is_compatible(child, "apm,xgene-edac-l3"))
+			xgene_edac_l3_add(edac, child, 1);
+		if (of_device_is_compatible(child, "apm,xgene-edac-l3-v2"))
+			xgene_edac_l3_add(edac, child, 2);
+		if (of_device_is_compatible(child, "apm,xgene-edac-soc"))
+			xgene_edac_soc_add(edac, child, 0);
+		if (of_device_is_compatible(child, "apm,xgene-edac-soc-v1"))
+			xgene_edac_soc_add(edac, child, 1);
+	}
+
+	return 0;
+
+out_err:
+	return rc;
+}
+
+static int xgene_edac_remove(struct platform_device *pdev)
+{
+	struct xgene_edac *edac = dev_get_drvdata(&pdev->dev);
+	struct xgene_edac_mc_ctx *mcu;
+	struct xgene_edac_mc_ctx *temp_mcu;
+	struct xgene_edac_pmd_ctx *pmd;
+	struct xgene_edac_pmd_ctx *temp_pmd;
+	struct xgene_edac_dev_ctx *node;
+	struct xgene_edac_dev_ctx *temp_node;
+
+	list_for_each_entry_safe(mcu, temp_mcu, &edac->mcus, next)
+		xgene_edac_mc_remove(mcu);
+
+	list_for_each_entry_safe(pmd, temp_pmd, &edac->pmds, next)
+		xgene_edac_pmd_remove(pmd);
+
+	list_for_each_entry_safe(node, temp_node, &edac->l3s, next)
+		xgene_edac_l3_remove(node);
+
+	list_for_each_entry_safe(node, temp_node, &edac->socs, next)
+		xgene_edac_soc_remove(node);
+
+	return 0;
+}
+
+static const struct of_device_id xgene_edac_of_match[] = {
+	{ .compatible = "apm,xgene-edac" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, xgene_edac_of_match);
+
+static struct platform_driver xgene_edac_driver = {
+	.probe = xgene_edac_probe,
+	.remove = xgene_edac_remove,
+	.driver = {
+		.name = "xgene-edac",
+		.of_match_table = xgene_edac_of_match,
+	},
+};
+
+static int __init xgene_edac_init(void)
+{
+	int rc;
+
+	/* Make sure error reporting method is sane */
+	switch (edac_op_state) {
+	case EDAC_OPSTATE_POLL:
+	case EDAC_OPSTATE_INT:
+		break;
+	default:
+		edac_op_state = EDAC_OPSTATE_INT;
+		break;
+	}
+
+	rc = platform_driver_register(&xgene_edac_driver);
+	if (rc) {
+		edac_printk(KERN_ERR, EDAC_MOD_STR,
+			    "EDAC fails to register\n");
+		goto reg_failed;
+	}
+
+	return 0;
+
+reg_failed:
+	return rc;
+}
+module_init(xgene_edac_init);
+
+static void __exit xgene_edac_exit(void)
+{
+	platform_driver_unregister(&xgene_edac_driver);
+}
+module_exit(xgene_edac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Feng Kan <fkan@apm.com>");
+MODULE_DESCRIPTION("APM X-Gene EDAC driver");
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state,
+		 "EDAC error reporting state: 0=Poll, 2=Interrupt");