Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1172 insertions, 0 deletions

diff --git a/drivers/gpu/drm/nouveau/dispnv04/crtc.c b/drivers/gpu/drm/nouveau/dispnv04/crtc.c
new file mode 100644
index 000000000..2c569e264
--- /dev/null
+++ b/drivers/gpu/drm/nouveau/dispnv04/crtc.c
@@ -0,0 +1,1172 @@
+/*
+ * Copyright 1993-2003 NVIDIA, Corporation
+ * Copyright 2006 Dave Airlie
+ * Copyright 2007 Maarten Maathuis
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+#include <linux/pm_runtime.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_plane_helper.h>
+
+#include "nouveau_drv.h"
+#include "nouveau_reg.h"
+#include "nouveau_ttm.h"
+#include "nouveau_bo.h"
+#include "nouveau_gem.h"
+#include "nouveau_encoder.h"
+#include "nouveau_connector.h"
+#include "nouveau_crtc.h"
+#include "hw.h"
+#include "nvreg.h"
+#include "nouveau_fbcon.h"
+#include "disp.h"
+
+#include <subdev/bios/pll.h>
+#include <subdev/clk.h>
+
+static int
+nv04_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
+			struct drm_framebuffer *old_fb);
+
+static void
+crtc_wr_cio_state(struct drm_crtc *crtc, struct nv04_crtc_reg *crtcstate, int index)
+{
+	NVWriteVgaCrtc(crtc->dev, nouveau_crtc(crtc)->index, index,
+		       crtcstate->CRTC[index]);
+}
+
+static void nv_crtc_set_digital_vibrance(struct drm_crtc *crtc, int level)
+{
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct nv04_crtc_reg *regp = &nv04_display(dev)->mode_reg.crtc_reg[nv_crtc->index];
+
+	regp->CRTC[NV_CIO_CRE_CSB] = nv_crtc->saturation = level;
+	if (nv_crtc->saturation && nv_gf4_disp_arch(crtc->dev)) {
+		regp->CRTC[NV_CIO_CRE_CSB] = 0x80;
+		regp->CRTC[NV_CIO_CRE_5B] = nv_crtc->saturation << 2;
+		crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_5B);
+	}
+	crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_CSB);
+}
+
+static void nv_crtc_set_image_sharpening(struct drm_crtc *crtc, int level)
+{
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct nv04_crtc_reg *regp = &nv04_display(dev)->mode_reg.crtc_reg[nv_crtc->index];
+
+	nv_crtc->sharpness = level;
+	if (level < 0)	/* blur is in hw range 0x3f -> 0x20 */
+		level += 0x40;
+	regp->ramdac_634 = level;
+	NVWriteRAMDAC(crtc->dev, nv_crtc->index, NV_PRAMDAC_634, regp->ramdac_634);
+}
+
+#define PLLSEL_VPLL1_MASK				\
+	(NV_PRAMDAC_PLL_COEFF_SELECT_SOURCE_PROG_VPLL	\
+	 | NV_PRAMDAC_PLL_COEFF_SELECT_VCLK_RATIO_DB2)
+#define PLLSEL_VPLL2_MASK				\
+	(NV_PRAMDAC_PLL_COEFF_SELECT_PLL_SOURCE_VPLL2		\
+	 | NV_PRAMDAC_PLL_COEFF_SELECT_VCLK2_RATIO_DB2)
+#define PLLSEL_TV_MASK					\
+	(NV_PRAMDAC_PLL_COEFF_SELECT_TV_VSCLK1		\
+	 | NV_PRAMDAC_PLL_COEFF_SELECT_TV_PCLK1		\
+	 | NV_PRAMDAC_PLL_COEFF_SELECT_TV_VSCLK2	\
+	 | NV_PRAMDAC_PLL_COEFF_SELECT_TV_PCLK2)
+
+/* NV4x 0x40.. pll notes:
+ * gpu pll: 0x4000 + 0x4004
+ * ?gpu? pll: 0x4008 + 0x400c
+ * vpll1: 0x4010 + 0x4014
+ * vpll2: 0x4018 + 0x401c
+ * mpll: 0x4020 + 0x4024
+ * mpll: 0x4038 + 0x403c
+ *
+ * the first register of each pair has some unknown details:
+ * bits 0-7: redirected values from elsewhere? (similar to PLL_SETUP_CONTROL?)
+ * bits 20-23: (mpll) something to do with post divider?
+ * bits 28-31: related to single stage mode? (bit 8/12)
+ */
+
+static void nv_crtc_calc_state_ext(struct drm_crtc *crtc, struct drm_display_mode * mode, int dot_clock)
+{
+	struct drm_device *dev = crtc->dev;
+	struct nouveau_drm *drm = nouveau_drm(dev);
+	struct nvkm_bios *bios = nvxx_bios(&drm->client.device);
+	struct nvkm_clk *clk = nvxx_clk(&drm->client.device);
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+	struct nv04_mode_state *state = &nv04_display(dev)->mode_reg;
+	struct nv04_crtc_reg *regp = &state->crtc_reg[nv_crtc->index];
+	struct nvkm_pll_vals *pv = &regp->pllvals;
+	struct nvbios_pll pll_lim;
+
+	if (nvbios_pll_parse(bios, nv_crtc->index ? PLL_VPLL1 : PLL_VPLL0,
+			    &pll_lim))
+		return;
+
+	/* NM2 == 0 is used to determine single stage mode on two stage plls */
+	pv->NM2 = 0;
+
+	/* for newer nv4x the blob uses only the first stage of the vpll below a
+	 * certain clock.  for a certain nv4b this is 150MHz.  since the max
+	 * output frequency of the first stage for this card is 300MHz, it is
+	 * assumed the threshold is given by vco1 maxfreq/2
+	 */
+	/* for early nv4x, specifically nv40 and *some* nv43 (devids 0 and 6,
+	 * not 8, others unknown), the blob always uses both plls.  no problem
+	 * has yet been observed in allowing the use a single stage pll on all
+	 * nv43 however.  the behaviour of single stage use is untested on nv40
+	 */
+	if (drm->client.device.info.chipset > 0x40 && dot_clock <= (pll_lim.vco1.max_freq / 2))
+		memset(&pll_lim.vco2, 0, sizeof(pll_lim.vco2));
+
+
+	if (!clk->pll_calc(clk, &pll_lim, dot_clock, pv))
+		return;
+
+	state->pllsel &= PLLSEL_VPLL1_MASK | PLLSEL_VPLL2_MASK | PLLSEL_TV_MASK;
+
+	/* The blob uses this always, so let's do the same */
+	if (drm->client.device.info.family == NV_DEVICE_INFO_V0_CURIE)
+		state->pllsel |= NV_PRAMDAC_PLL_COEFF_SELECT_USE_VPLL2_TRUE;
+	/* again nv40 and some nv43 act more like nv3x as described above */
+	if (drm->client.device.info.chipset < 0x41)
+		state->pllsel |= NV_PRAMDAC_PLL_COEFF_SELECT_SOURCE_PROG_MPLL |
+				 NV_PRAMDAC_PLL_COEFF_SELECT_SOURCE_PROG_NVPLL;
+	state->pllsel |= nv_crtc->index ? PLLSEL_VPLL2_MASK : PLLSEL_VPLL1_MASK;
+
+	if (pv->NM2)
+		NV_DEBUG(drm, "vpll: n1 %d n2 %d m1 %d m2 %d log2p %d\n",
+			 pv->N1, pv->N2, pv->M1, pv->M2, pv->log2P);
+	else
+		NV_DEBUG(drm, "vpll: n %d m %d log2p %d\n",
+			 pv->N1, pv->M1, pv->log2P);
+
+	nv_crtc->cursor.set_offset(nv_crtc, nv_crtc->cursor.offset);
+}
+
+static void
+nv_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct nouveau_drm *drm = nouveau_drm(dev);
+	unsigned char seq1 = 0, crtc17 = 0;
+	unsigned char crtc1A;
+
+	NV_DEBUG(drm, "Setting dpms mode %d on CRTC %d\n", mode,
+							nv_crtc->index);
+
+	if (nv_crtc->last_dpms == mode) /* Don't do unnecessary mode changes. */
+		return;
+
+	nv_crtc->last_dpms = mode;
+
+	if (nv_two_heads(dev))
+		NVSetOwner(dev, nv_crtc->index);
+
+	/* nv4ref indicates these two RPC1 bits inhibit h/v sync */
+	crtc1A = NVReadVgaCrtc(dev, nv_crtc->index,
+					NV_CIO_CRE_RPC1_INDEX) & ~0xC0;
+	switch (mode) {
+	case DRM_MODE_DPMS_STANDBY:
+		/* Screen: Off; HSync: Off, VSync: On -- Not Supported */
+		seq1 = 0x20;
+		crtc17 = 0x80;
+		crtc1A |= 0x80;
+		break;
+	case DRM_MODE_DPMS_SUSPEND:
+		/* Screen: Off; HSync: On, VSync: Off -- Not Supported */
+		seq1 = 0x20;
+		crtc17 = 0x80;
+		crtc1A |= 0x40;
+		break;
+	case DRM_MODE_DPMS_OFF:
+		/* Screen: Off; HSync: Off, VSync: Off */
+		seq1 = 0x20;
+		crtc17 = 0x00;
+		crtc1A |= 0xC0;
+		break;
+	case DRM_MODE_DPMS_ON:
+	default:
+		/* Screen: On; HSync: On, VSync: On */
+		seq1 = 0x00;
+		crtc17 = 0x80;
+		break;
+	}
+
+	NVVgaSeqReset(dev, nv_crtc->index, true);
+	/* Each head has it's own sequencer, so we can turn it off when we want */
+	seq1 |= (NVReadVgaSeq(dev, nv_crtc->index, NV_VIO_SR_CLOCK_INDEX) & ~0x20);
+	NVWriteVgaSeq(dev, nv_crtc->index, NV_VIO_SR_CLOCK_INDEX, seq1);
+	crtc17 |= (NVReadVgaCrtc(dev, nv_crtc->index, NV_CIO_CR_MODE_INDEX) & ~0x80);
+	mdelay(10);
+	NVWriteVgaCrtc(dev, nv_crtc->index, NV_CIO_CR_MODE_INDEX, crtc17);
+	NVVgaSeqReset(dev, nv_crtc->index, false);
+
+	NVWriteVgaCrtc(dev, nv_crtc->index, NV_CIO_CRE_RPC1_INDEX, crtc1A);
+}
+
+static void
+nv_crtc_mode_set_vga(struct drm_crtc *crtc, struct drm_display_mode *mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+	struct nv04_crtc_reg *regp = &nv04_display(dev)->mode_reg.crtc_reg[nv_crtc->index];
+	struct drm_framebuffer *fb = crtc->primary->fb;
+
+	/* Calculate our timings */
+	int horizDisplay	= (mode->crtc_hdisplay >> 3)		- 1;
+	int horizStart		= (mode->crtc_hsync_start >> 3) 	+ 1;
+	int horizEnd		= (mode->crtc_hsync_end >> 3)		+ 1;
+	int horizTotal		= (mode->crtc_htotal >> 3)		- 5;
+	int horizBlankStart	= (mode->crtc_hdisplay >> 3)		- 1;
+	int horizBlankEnd	= (mode->crtc_htotal >> 3)		- 1;
+	int vertDisplay		= mode->crtc_vdisplay			- 1;
+	int vertStart		= mode->crtc_vsync_start 		- 1;
+	int vertEnd		= mode->crtc_vsync_end			- 1;
+	int vertTotal		= mode->crtc_vtotal 			- 2;
+	int vertBlankStart	= mode->crtc_vdisplay 			- 1;
+	int vertBlankEnd	= mode->crtc_vtotal			- 1;
+
+	struct drm_encoder *encoder;
+	bool fp_output = false;
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+
+		if (encoder->crtc == crtc &&
+		    (nv_encoder->dcb->type == DCB_OUTPUT_LVDS ||
+		     nv_encoder->dcb->type == DCB_OUTPUT_TMDS))
+			fp_output = true;
+	}
+
+	if (fp_output) {
+		vertStart = vertTotal - 3;
+		vertEnd = vertTotal - 2;
+		vertBlankStart = vertStart;
+		horizStart = horizTotal - 5;
+		horizEnd = horizTotal - 2;
+		horizBlankEnd = horizTotal + 4;
+#if 0
+		if (dev->overlayAdaptor && drm->client.device.info.family >= NV_DEVICE_INFO_V0_CELSIUS)
+			/* This reportedly works around some video overlay bandwidth problems */
+			horizTotal += 2;
+#endif
+	}
+
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		vertTotal |= 1;
+
+#if 0
+	ErrorF("horizDisplay: 0x%X \n", horizDisplay);
+	ErrorF("horizStart: 0x%X \n", horizStart);
+	ErrorF("horizEnd: 0x%X \n", horizEnd);
+	ErrorF("horizTotal: 0x%X \n", horizTotal);
+	ErrorF("horizBlankStart: 0x%X \n", horizBlankStart);
+	ErrorF("horizBlankEnd: 0x%X \n", horizBlankEnd);
+	ErrorF("vertDisplay: 0x%X \n", vertDisplay);
+	ErrorF("vertStart: 0x%X \n", vertStart);
+	ErrorF("vertEnd: 0x%X \n", vertEnd);
+	ErrorF("vertTotal: 0x%X \n", vertTotal);
+	ErrorF("vertBlankStart: 0x%X \n", vertBlankStart);
+	ErrorF("vertBlankEnd: 0x%X \n", vertBlankEnd);
+#endif
+
+	/*
+	* compute correct Hsync & Vsync polarity
+	*/
+	if ((mode->flags & (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC))
+		&& (mode->flags & (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC))) {
+
+		regp->MiscOutReg = 0x23;
+		if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+			regp->MiscOutReg |= 0x40;
+		if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+			regp->MiscOutReg |= 0x80;
+	} else {
+		int vdisplay = mode->vdisplay;
+		if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+			vdisplay *= 2;
+		if (mode->vscan > 1)
+			vdisplay *= mode->vscan;
+		if (vdisplay < 400)
+			regp->MiscOutReg = 0xA3;	/* +hsync -vsync */
+		else if (vdisplay < 480)
+			regp->MiscOutReg = 0x63;	/* -hsync +vsync */
+		else if (vdisplay < 768)
+			regp->MiscOutReg = 0xE3;	/* -hsync -vsync */
+		else
+			regp->MiscOutReg = 0x23;	/* +hsync +vsync */
+	}
+
+	/*
+	 * Time Sequencer
+	 */
+	regp->Sequencer[NV_VIO_SR_RESET_INDEX] = 0x00;
+	/* 0x20 disables the sequencer */
+	if (mode->flags & DRM_MODE_FLAG_CLKDIV2)
+		regp->Sequencer[NV_VIO_SR_CLOCK_INDEX] = 0x29;
+	else
+		regp->Sequencer[NV_VIO_SR_CLOCK_INDEX] = 0x21;
+	regp->Sequencer[NV_VIO_SR_PLANE_MASK_INDEX] = 0x0F;
+	regp->Sequencer[NV_VIO_SR_CHAR_MAP_INDEX] = 0x00;
+	regp->Sequencer[NV_VIO_SR_MEM_MODE_INDEX] = 0x0E;
+
+	/*
+	 * CRTC
+	 */
+	regp->CRTC[NV_CIO_CR_HDT_INDEX] = horizTotal;
+	regp->CRTC[NV_CIO_CR_HDE_INDEX] = horizDisplay;
+	regp->CRTC[NV_CIO_CR_HBS_INDEX] = horizBlankStart;
+	regp->CRTC[NV_CIO_CR_HBE_INDEX] = (1 << 7) |
+					  XLATE(horizBlankEnd, 0, NV_CIO_CR_HBE_4_0);
+	regp->CRTC[NV_CIO_CR_HRS_INDEX] = horizStart;
+	regp->CRTC[NV_CIO_CR_HRE_INDEX] = XLATE(horizBlankEnd, 5, NV_CIO_CR_HRE_HBE_5) |
+					  XLATE(horizEnd, 0, NV_CIO_CR_HRE_4_0);
+	regp->CRTC[NV_CIO_CR_VDT_INDEX] = vertTotal;
+	regp->CRTC[NV_CIO_CR_OVL_INDEX] = XLATE(vertStart, 9, NV_CIO_CR_OVL_VRS_9) |
+					  XLATE(vertDisplay, 9, NV_CIO_CR_OVL_VDE_9) |
+					  XLATE(vertTotal, 9, NV_CIO_CR_OVL_VDT_9) |
+					  (1 << 4) |
+					  XLATE(vertBlankStart, 8, NV_CIO_CR_OVL_VBS_8) |
+					  XLATE(vertStart, 8, NV_CIO_CR_OVL_VRS_8) |
+					  XLATE(vertDisplay, 8, NV_CIO_CR_OVL_VDE_8) |
+					  XLATE(vertTotal, 8, NV_CIO_CR_OVL_VDT_8);
+	regp->CRTC[NV_CIO_CR_RSAL_INDEX] = 0x00;
+	regp->CRTC[NV_CIO_CR_CELL_HT_INDEX] = ((mode->flags & DRM_MODE_FLAG_DBLSCAN) ? MASK(NV_CIO_CR_CELL_HT_SCANDBL) : 0) |
+					      1 << 6 |
+					      XLATE(vertBlankStart, 9, NV_CIO_CR_CELL_HT_VBS_9);
+	regp->CRTC[NV_CIO_CR_CURS_ST_INDEX] = 0x00;
+	regp->CRTC[NV_CIO_CR_CURS_END_INDEX] = 0x00;
+	regp->CRTC[NV_CIO_CR_SA_HI_INDEX] = 0x00;
+	regp->CRTC[NV_CIO_CR_SA_LO_INDEX] = 0x00;
+	regp->CRTC[NV_CIO_CR_TCOFF_HI_INDEX] = 0x00;
+	regp->CRTC[NV_CIO_CR_TCOFF_LO_INDEX] = 0x00;
+	regp->CRTC[NV_CIO_CR_VRS_INDEX] = vertStart;
+	regp->CRTC[NV_CIO_CR_VRE_INDEX] = 1 << 5 | XLATE(vertEnd, 0, NV_CIO_CR_VRE_3_0);
+	regp->CRTC[NV_CIO_CR_VDE_INDEX] = vertDisplay;
+	/* framebuffer can be larger than crtc scanout area. */
+	regp->CRTC[NV_CIO_CR_OFFSET_INDEX] = fb->pitches[0] / 8;
+	regp->CRTC[NV_CIO_CR_ULINE_INDEX] = 0x00;
+	regp->CRTC[NV_CIO_CR_VBS_INDEX] = vertBlankStart;
+	regp->CRTC[NV_CIO_CR_VBE_INDEX] = vertBlankEnd;
+	regp->CRTC[NV_CIO_CR_MODE_INDEX] = 0x43;
+	regp->CRTC[NV_CIO_CR_LCOMP_INDEX] = 0xff;
+
+	/*
+	 * Some extended CRTC registers (they are not saved with the rest of the vga regs).
+	 */
+
+	/* framebuffer can be larger than crtc scanout area. */
+	regp->CRTC[NV_CIO_CRE_RPC0_INDEX] =
+		XLATE(fb->pitches[0] / 8, 8, NV_CIO_CRE_RPC0_OFFSET_10_8);
+	regp->CRTC[NV_CIO_CRE_42] =
+		XLATE(fb->pitches[0] / 8, 11, NV_CIO_CRE_42_OFFSET_11);
+	regp->CRTC[NV_CIO_CRE_RPC1_INDEX] = mode->crtc_hdisplay < 1280 ?
+					    MASK(NV_CIO_CRE_RPC1_LARGE) : 0x00;
+	regp->CRTC[NV_CIO_CRE_LSR_INDEX] = XLATE(horizBlankEnd, 6, NV_CIO_CRE_LSR_HBE_6) |
+					   XLATE(vertBlankStart, 10, NV_CIO_CRE_LSR_VBS_10) |
+					   XLATE(vertStart, 10, NV_CIO_CRE_LSR_VRS_10) |
+					   XLATE(vertDisplay, 10, NV_CIO_CRE_LSR_VDE_10) |
+					   XLATE(vertTotal, 10, NV_CIO_CRE_LSR_VDT_10);
+	regp->CRTC[NV_CIO_CRE_HEB__INDEX] = XLATE(horizStart, 8, NV_CIO_CRE_HEB_HRS_8) |
+					    XLATE(horizBlankStart, 8, NV_CIO_CRE_HEB_HBS_8) |
+					    XLATE(horizDisplay, 8, NV_CIO_CRE_HEB_HDE_8) |
+					    XLATE(horizTotal, 8, NV_CIO_CRE_HEB_HDT_8);
+	regp->CRTC[NV_CIO_CRE_EBR_INDEX] = XLATE(vertBlankStart, 11, NV_CIO_CRE_EBR_VBS_11) |
+					   XLATE(vertStart, 11, NV_CIO_CRE_EBR_VRS_11) |
+					   XLATE(vertDisplay, 11, NV_CIO_CRE_EBR_VDE_11) |
+					   XLATE(vertTotal, 11, NV_CIO_CRE_EBR_VDT_11);
+
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE) {
+		horizTotal = (horizTotal >> 1) & ~1;
+		regp->CRTC[NV_CIO_CRE_ILACE__INDEX] = horizTotal;
+		regp->CRTC[NV_CIO_CRE_HEB__INDEX] |= XLATE(horizTotal, 8, NV_CIO_CRE_HEB_ILC_8);
+	} else
+		regp->CRTC[NV_CIO_CRE_ILACE__INDEX] = 0xff;  /* interlace off */
+
+	/*
+	* Graphics Display Controller
+	*/
+	regp->Graphics[NV_VIO_GX_SR_INDEX] = 0x00;
+	regp->Graphics[NV_VIO_GX_SREN_INDEX] = 0x00;
+	regp->Graphics[NV_VIO_GX_CCOMP_INDEX] = 0x00;
+	regp->Graphics[NV_VIO_GX_ROP_INDEX] = 0x00;
+	regp->Graphics[NV_VIO_GX_READ_MAP_INDEX] = 0x00;
+	regp->Graphics[NV_VIO_GX_MODE_INDEX] = 0x40; /* 256 color mode */
+	regp->Graphics[NV_VIO_GX_MISC_INDEX] = 0x05; /* map 64k mem + graphic mode */
+	regp->Graphics[NV_VIO_GX_DONT_CARE_INDEX] = 0x0F;
+	regp->Graphics[NV_VIO_GX_BIT_MASK_INDEX] = 0xFF;
+
+	regp->Attribute[0]  = 0x00; /* standard colormap translation */
+	regp->Attribute[1]  = 0x01;
+	regp->Attribute[2]  = 0x02;
+	regp->Attribute[3]  = 0x03;
+	regp->Attribute[4]  = 0x04;
+	regp->Attribute[5]  = 0x05;
+	regp->Attribute[6]  = 0x06;
+	regp->Attribute[7]  = 0x07;
+	regp->Attribute[8]  = 0x08;
+	regp->Attribute[9]  = 0x09;
+	regp->Attribute[10] = 0x0A;
+	regp->Attribute[11] = 0x0B;
+	regp->Attribute[12] = 0x0C;
+	regp->Attribute[13] = 0x0D;
+	regp->Attribute[14] = 0x0E;
+	regp->Attribute[15] = 0x0F;
+	regp->Attribute[NV_CIO_AR_MODE_INDEX] = 0x01; /* Enable graphic mode */
+	/* Non-vga */
+	regp->Attribute[NV_CIO_AR_OSCAN_INDEX] = 0x00;
+	regp->Attribute[NV_CIO_AR_PLANE_INDEX] = 0x0F; /* enable all color planes */
+	regp->Attribute[NV_CIO_AR_HPP_INDEX] = 0x00;
+	regp->Attribute[NV_CIO_AR_CSEL_INDEX] = 0x00;
+}
+
+/**
+ * Sets up registers for the given mode/adjusted_mode pair.
+ *
+ * The clocks, CRTCs and outputs attached to this CRTC must be off.
+ *
+ * This shouldn't enable any clocks, CRTCs, or outputs, but they should
+ * be easily turned on/off after this.
+ */
+static void
+nv_crtc_mode_set_regs(struct drm_crtc *crtc, struct drm_display_mode * mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct nouveau_drm *drm = nouveau_drm(dev);
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+	struct nv04_crtc_reg *regp = &nv04_display(dev)->mode_reg.crtc_reg[nv_crtc->index];
+	struct nv04_crtc_reg *savep = &nv04_display(dev)->saved_reg.crtc_reg[nv_crtc->index];
+	const struct drm_framebuffer *fb = crtc->primary->fb;
+	struct drm_encoder *encoder;
+	bool lvds_output = false, tmds_output = false, tv_output = false,
+		off_chip_digital = false;
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+		bool digital = false;
+
+		if (encoder->crtc != crtc)
+			continue;
+
+		if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS)
+			digital = lvds_output = true;
+		if (nv_encoder->dcb->type == DCB_OUTPUT_TV)
+			tv_output = true;
+		if (nv_encoder->dcb->type == DCB_OUTPUT_TMDS)
+			digital = tmds_output = true;
+		if (nv_encoder->dcb->location != DCB_LOC_ON_CHIP && digital)
+			off_chip_digital = true;
+	}
+
+	/* Registers not directly related to the (s)vga mode */
+
+	/* What is the meaning of this register? */
+	/* A few popular values are 0x18, 0x1c, 0x38, 0x3c */
+	regp->CRTC[NV_CIO_CRE_ENH_INDEX] = savep->CRTC[NV_CIO_CRE_ENH_INDEX] & ~(1<<5);
+
+	regp->crtc_eng_ctrl = 0;
+	/* Except for rare conditions I2C is enabled on the primary crtc */
+	if (nv_crtc->index == 0)
+		regp->crtc_eng_ctrl |= NV_CRTC_FSEL_I2C;
+#if 0
+	/* Set overlay to desired crtc. */
+	if (dev->overlayAdaptor) {
+		NVPortPrivPtr pPriv = GET_OVERLAY_PRIVATE(dev);
+		if (pPriv->overlayCRTC == nv_crtc->index)
+			regp->crtc_eng_ctrl |= NV_CRTC_FSEL_OVERLAY;
+	}
+#endif
+
+	/* ADDRESS_SPACE_PNVM is the same as setting HCUR_ASI */
+	regp->cursor_cfg = NV_PCRTC_CURSOR_CONFIG_CUR_LINES_64 |
+			     NV_PCRTC_CURSOR_CONFIG_CUR_PIXELS_64 |
+			     NV_PCRTC_CURSOR_CONFIG_ADDRESS_SPACE_PNVM;
+	if (drm->client.device.info.chipset >= 0x11)
+		regp->cursor_cfg |= NV_PCRTC_CURSOR_CONFIG_CUR_BPP_32;
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		regp->cursor_cfg |= NV_PCRTC_CURSOR_CONFIG_DOUBLE_SCAN_ENABLE;
+
+	/* Unblock some timings */
+	regp->CRTC[NV_CIO_CRE_53] = 0;
+	regp->CRTC[NV_CIO_CRE_54] = 0;
+
+	/* 0x00 is disabled, 0x11 is lvds, 0x22 crt and 0x88 tmds */
+	if (lvds_output)
+		regp->CRTC[NV_CIO_CRE_SCRATCH3__INDEX] = 0x11;
+	else if (tmds_output)
+		regp->CRTC[NV_CIO_CRE_SCRATCH3__INDEX] = 0x88;
+	else
+		regp->CRTC[NV_CIO_CRE_SCRATCH3__INDEX] = 0x22;
+
+	/* These values seem to vary */
+	/* This register seems to be used by the bios to make certain decisions on some G70 cards? */
+	regp->CRTC[NV_CIO_CRE_SCRATCH4__INDEX] = savep->CRTC[NV_CIO_CRE_SCRATCH4__INDEX];
+
+	nv_crtc_set_digital_vibrance(crtc, nv_crtc->saturation);
+
+	/* probably a scratch reg, but kept for cargo-cult purposes:
+	 * bit0: crtc0?, head A
+	 * bit6: lvds, head A
+	 * bit7: (only in X), head A
+	 */
+	if (nv_crtc->index == 0)
+		regp->CRTC[NV_CIO_CRE_4B] = savep->CRTC[NV_CIO_CRE_4B] | 0x80;
+
+	/* The blob seems to take the current value from crtc 0, add 4 to that
+	 * and reuse the old value for crtc 1 */
+	regp->CRTC[NV_CIO_CRE_TVOUT_LATENCY] = nv04_display(dev)->saved_reg.crtc_reg[0].CRTC[NV_CIO_CRE_TVOUT_LATENCY];
+	if (!nv_crtc->index)
+		regp->CRTC[NV_CIO_CRE_TVOUT_LATENCY] += 4;
+
+	/* the blob sometimes sets |= 0x10 (which is the same as setting |=
+	 * 1 << 30 on 0x60.830), for no apparent reason */
+	regp->CRTC[NV_CIO_CRE_59] = off_chip_digital;
+
+	if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_RANKINE)
+		regp->CRTC[0x9f] = off_chip_digital ? 0x11 : 0x1;
+
+	regp->crtc_830 = mode->crtc_vdisplay - 3;
+	regp->crtc_834 = mode->crtc_vdisplay - 1;
+
+	if (drm->client.device.info.family == NV_DEVICE_INFO_V0_CURIE)
+		/* This is what the blob does */
+		regp->crtc_850 = NVReadCRTC(dev, 0, NV_PCRTC_850);
+
+	if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_RANKINE)
+		regp->gpio_ext = NVReadCRTC(dev, 0, NV_PCRTC_GPIO_EXT);
+
+	if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_CELSIUS)
+		regp->crtc_cfg = NV10_PCRTC_CONFIG_START_ADDRESS_HSYNC;
+	else
+		regp->crtc_cfg = NV04_PCRTC_CONFIG_START_ADDRESS_HSYNC;
+
+	/* Some misc regs */
+	if (drm->client.device.info.family == NV_DEVICE_INFO_V0_CURIE) {
+		regp->CRTC[NV_CIO_CRE_85] = 0xFF;
+		regp->CRTC[NV_CIO_CRE_86] = 0x1;
+	}
+
+	regp->CRTC[NV_CIO_CRE_PIXEL_INDEX] = (fb->format->depth + 1) / 8;
+	/* Enable slaved mode (called MODE_TV in nv4ref.h) */
+	if (lvds_output || tmds_output || tv_output)
+		regp->CRTC[NV_CIO_CRE_PIXEL_INDEX] |= (1 << 7);
+
+	/* Generic PRAMDAC regs */
+
+	if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_CELSIUS)
+		/* Only bit that bios and blob set. */
+		regp->nv10_cursync = (1 << 25);
+
+	regp->ramdac_gen_ctrl = NV_PRAMDAC_GENERAL_CONTROL_BPC_8BITS |
+				NV_PRAMDAC_GENERAL_CONTROL_VGA_STATE_SEL |
+				NV_PRAMDAC_GENERAL_CONTROL_PIXMIX_ON;
+	if (fb->format->depth == 16)
+		regp->ramdac_gen_ctrl |= NV_PRAMDAC_GENERAL_CONTROL_ALT_MODE_SEL;
+	if (drm->client.device.info.chipset >= 0x11)
+		regp->ramdac_gen_ctrl |= NV_PRAMDAC_GENERAL_CONTROL_PIPE_LONG;
+
+	regp->ramdac_630 = 0; /* turn off green mode (tv test pattern?) */
+	regp->tv_setup = 0;
+
+	nv_crtc_set_image_sharpening(crtc, nv_crtc->sharpness);
+
+	/* Some values the blob sets */
+	regp->ramdac_8c0 = 0x100;
+	regp->ramdac_a20 = 0x0;
+	regp->ramdac_a24 = 0xfffff;
+	regp->ramdac_a34 = 0x1;
+}
+
+static int
+nv_crtc_swap_fbs(struct drm_crtc *crtc, struct drm_framebuffer *old_fb)
+{
+	struct nv04_display *disp = nv04_display(crtc->dev);
+	struct nouveau_framebuffer *nvfb = nouveau_framebuffer(crtc->primary->fb);
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+	int ret;
+
+	ret = nouveau_bo_pin(nvfb->nvbo, TTM_PL_FLAG_VRAM, false);
+	if (ret == 0) {
+		if (disp->image[nv_crtc->index])
+			nouveau_bo_unpin(disp->image[nv_crtc->index]);
+		nouveau_bo_ref(nvfb->nvbo, &disp->image[nv_crtc->index]);
+	}
+
+	return ret;
+}
+
+/**
+ * Sets up registers for the given mode/adjusted_mode pair.
+ *
+ * The clocks, CRTCs and outputs attached to this CRTC must be off.
+ *
+ * This shouldn't enable any clocks, CRTCs, or outputs, but they should
+ * be easily turned on/off after this.
+ */
+static int
+nv_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode,
+		 struct drm_display_mode *adjusted_mode,
+		 int x, int y, struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+	struct nouveau_drm *drm = nouveau_drm(dev);
+	int ret;
+
+	NV_DEBUG(drm, "CTRC mode on CRTC %d:\n", nv_crtc->index);
+	drm_mode_debug_printmodeline(adjusted_mode);
+
+	ret = nv_crtc_swap_fbs(crtc, old_fb);
+	if (ret)
+		return ret;
+
+	/* unlock must come after turning off FP_TG_CONTROL in output_prepare */
+	nv_lock_vga_crtc_shadow(dev, nv_crtc->index, -1);
+
+	nv_crtc_mode_set_vga(crtc, adjusted_mode);
+	/* calculated in nv04_dfp_prepare, nv40 needs it written before calculating PLLs */
+	if (drm->client.device.info.family == NV_DEVICE_INFO_V0_CURIE)
+		NVWriteRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK, nv04_display(dev)->mode_reg.sel_clk);
+	nv_crtc_mode_set_regs(crtc, adjusted_mode);
+	nv_crtc_calc_state_ext(crtc, mode, adjusted_mode->clock);
+	return 0;
+}
+
+static void nv_crtc_save(struct drm_crtc *crtc)
+{
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct nv04_mode_state *state = &nv04_display(dev)->mode_reg;
+	struct nv04_crtc_reg *crtc_state = &state->crtc_reg[nv_crtc->index];
+	struct nv04_mode_state *saved = &nv04_display(dev)->saved_reg;
+	struct nv04_crtc_reg *crtc_saved = &saved->crtc_reg[nv_crtc->index];
+
+	if (nv_two_heads(crtc->dev))
+		NVSetOwner(crtc->dev, nv_crtc->index);
+
+	nouveau_hw_save_state(crtc->dev, nv_crtc->index, saved);
+
+	/* init some state to saved value */
+	state->sel_clk = saved->sel_clk & ~(0x5 << 16);
+	crtc_state->CRTC[NV_CIO_CRE_LCD__INDEX] = crtc_saved->CRTC[NV_CIO_CRE_LCD__INDEX];
+	state->pllsel = saved->pllsel & ~(PLLSEL_VPLL1_MASK | PLLSEL_VPLL2_MASK | PLLSEL_TV_MASK);
+	crtc_state->gpio_ext = crtc_saved->gpio_ext;
+}
+
+static void nv_crtc_restore(struct drm_crtc *crtc)
+{
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	int head = nv_crtc->index;
+	uint8_t saved_cr21 = nv04_display(dev)->saved_reg.crtc_reg[head].CRTC[NV_CIO_CRE_21];
+
+	if (nv_two_heads(crtc->dev))
+		NVSetOwner(crtc->dev, head);
+
+	nouveau_hw_load_state(crtc->dev, head, &nv04_display(dev)->saved_reg);
+	nv_lock_vga_crtc_shadow(crtc->dev, head, saved_cr21);
+
+	nv_crtc->last_dpms = NV_DPMS_CLEARED;
+}
+
+static void nv_crtc_prepare(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct nouveau_drm *drm = nouveau_drm(dev);
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+	const struct drm_crtc_helper_funcs *funcs = crtc->helper_private;
+
+	if (nv_two_heads(dev))
+		NVSetOwner(dev, nv_crtc->index);
+
+	drm_crtc_vblank_off(crtc);
+	funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+
+	NVBlankScreen(dev, nv_crtc->index, true);
+
+	/* Some more preparation. */
+	NVWriteCRTC(dev, nv_crtc->index, NV_PCRTC_CONFIG, NV_PCRTC_CONFIG_START_ADDRESS_NON_VGA);
+	if (drm->client.device.info.family == NV_DEVICE_INFO_V0_CURIE) {
+		uint32_t reg900 = NVReadRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_900);
+		NVWriteRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_900, reg900 & ~0x10000);
+	}
+}
+
+static void nv_crtc_commit(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	const struct drm_crtc_helper_funcs *funcs = crtc->helper_private;
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+
+	nouveau_hw_load_state(dev, nv_crtc->index, &nv04_display(dev)->mode_reg);
+	nv04_crtc_mode_set_base(crtc, crtc->x, crtc->y, NULL);
+
+#ifdef __BIG_ENDIAN
+	/* turn on LFB swapping */
+	{
+		uint8_t tmp = NVReadVgaCrtc(dev, nv_crtc->index, NV_CIO_CRE_RCR);
+		tmp |= MASK(NV_CIO_CRE_RCR_ENDIAN_BIG);
+		NVWriteVgaCrtc(dev, nv_crtc->index, NV_CIO_CRE_RCR, tmp);
+	}
+#endif
+
+	funcs->dpms(crtc, DRM_MODE_DPMS_ON);
+	drm_crtc_vblank_on(crtc);
+}
+
+static void nv_crtc_destroy(struct drm_crtc *crtc)
+{
+	struct nv04_display *disp = nv04_display(crtc->dev);
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+
+	if (!nv_crtc)
+		return;
+
+	drm_crtc_cleanup(crtc);
+
+	if (disp->image[nv_crtc->index])
+		nouveau_bo_unpin(disp->image[nv_crtc->index]);
+	nouveau_bo_ref(NULL, &disp->image[nv_crtc->index]);
+
+	nouveau_bo_unmap(nv_crtc->cursor.nvbo);
+	nouveau_bo_unpin(nv_crtc->cursor.nvbo);
+	nouveau_bo_ref(NULL, &nv_crtc->cursor.nvbo);
+	kfree(nv_crtc);
+}
+
+static void
+nv_crtc_gamma_load(struct drm_crtc *crtc)
+{
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+	struct drm_device *dev = nv_crtc->base.dev;
+	struct rgb { uint8_t r, g, b; } __attribute__((packed)) *rgbs;
+	u16 *r, *g, *b;
+	int i;
+
+	rgbs = (struct rgb *)nv04_display(dev)->mode_reg.crtc_reg[nv_crtc->index].DAC;
+	r = crtc->gamma_store;
+	g = r + crtc->gamma_size;
+	b = g + crtc->gamma_size;
+
+	for (i = 0; i < 256; i++) {
+		rgbs[i].r = *r++ >> 8;
+		rgbs[i].g = *g++ >> 8;
+		rgbs[i].b = *b++ >> 8;
+	}
+
+	nouveau_hw_load_state_palette(dev, nv_crtc->index, &nv04_display(dev)->mode_reg);
+}
+
+static void
+nv_crtc_disable(struct drm_crtc *crtc)
+{
+	struct nv04_display *disp = nv04_display(crtc->dev);
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+	if (disp->image[nv_crtc->index])
+		nouveau_bo_unpin(disp->image[nv_crtc->index]);
+	nouveau_bo_ref(NULL, &disp->image[nv_crtc->index]);
+}
+
+static int
+nv_crtc_gamma_set(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
+		  uint32_t size,
+		  struct drm_modeset_acquire_ctx *ctx)
+{
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+
+	/* We need to know the depth before we upload, but it's possible to
+	 * get called before a framebuffer is bound.  If this is the case,
+	 * mark the lut values as dirty by setting depth==0, and it'll be
+	 * uploaded on the first mode_set_base()
+	 */
+	if (!nv_crtc->base.primary->fb) {
+		nv_crtc->lut.depth = 0;
+		return 0;
+	}
+
+	nv_crtc_gamma_load(crtc);
+
+	return 0;
+}
+
+static int
+nv04_crtc_do_mode_set_base(struct drm_crtc *crtc,
+			   struct drm_framebuffer *passed_fb,
+			   int x, int y, bool atomic)
+{
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct nouveau_drm *drm = nouveau_drm(dev);
+	struct nv04_crtc_reg *regp = &nv04_display(dev)->mode_reg.crtc_reg[nv_crtc->index];
+	struct drm_framebuffer *drm_fb;
+	struct nouveau_framebuffer *fb;
+	int arb_burst, arb_lwm;
+
+	NV_DEBUG(drm, "index %d\n", nv_crtc->index);
+
+	/* no fb bound */
+	if (!atomic && !crtc->primary->fb) {
+		NV_DEBUG(drm, "No FB bound\n");
+		return 0;
+	}
+
+	/* If atomic, we want to switch to the fb we were passed, so
+	 * now we update pointers to do that.
+	 */
+	if (atomic) {
+		drm_fb = passed_fb;
+		fb = nouveau_framebuffer(passed_fb);
+	} else {
+		drm_fb = crtc->primary->fb;
+		fb = nouveau_framebuffer(crtc->primary->fb);
+	}
+
+	nv_crtc->fb.offset = fb->nvbo->bo.offset;
+
+	if (nv_crtc->lut.depth != drm_fb->format->depth) {
+		nv_crtc->lut.depth = drm_fb->format->depth;
+		nv_crtc_gamma_load(crtc);
+	}
+
+	/* Update the framebuffer format. */
+	regp->CRTC[NV_CIO_CRE_PIXEL_INDEX] &= ~3;
+	regp->CRTC[NV_CIO_CRE_PIXEL_INDEX] |= (drm_fb->format->depth + 1) / 8;
+	regp->ramdac_gen_ctrl &= ~NV_PRAMDAC_GENERAL_CONTROL_ALT_MODE_SEL;
+	if (drm_fb->format->depth == 16)
+		regp->ramdac_gen_ctrl |= NV_PRAMDAC_GENERAL_CONTROL_ALT_MODE_SEL;
+	crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_PIXEL_INDEX);
+	NVWriteRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_GENERAL_CONTROL,
+		      regp->ramdac_gen_ctrl);
+
+	regp->CRTC[NV_CIO_CR_OFFSET_INDEX] = drm_fb->pitches[0] >> 3;
+	regp->CRTC[NV_CIO_CRE_RPC0_INDEX] =
+		XLATE(drm_fb->pitches[0] >> 3, 8, NV_CIO_CRE_RPC0_OFFSET_10_8);
+	regp->CRTC[NV_CIO_CRE_42] =
+		XLATE(drm_fb->pitches[0] / 8, 11, NV_CIO_CRE_42_OFFSET_11);
+	crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_RPC0_INDEX);
+	crtc_wr_cio_state(crtc, regp, NV_CIO_CR_OFFSET_INDEX);
+	crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_42);
+
+	/* Update the framebuffer location. */
+	regp->fb_start = nv_crtc->fb.offset & ~3;
+	regp->fb_start += (y * drm_fb->pitches[0]) + (x * drm_fb->format->cpp[0]);
+	nv_set_crtc_base(dev, nv_crtc->index, regp->fb_start);
+
+	/* Update the arbitration parameters. */
+	nouveau_calc_arb(dev, crtc->mode.clock, drm_fb->format->cpp[0] * 8,
+			 &arb_burst, &arb_lwm);
+
+	regp->CRTC[NV_CIO_CRE_FF_INDEX] = arb_burst;
+	regp->CRTC[NV_CIO_CRE_FFLWM__INDEX] = arb_lwm & 0xff;
+	crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_FF_INDEX);
+	crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_FFLWM__INDEX);
+
+	if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_KELVIN) {
+		regp->CRTC[NV_CIO_CRE_47] = arb_lwm >> 8;
+		crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_47);
+	}
+
+	return 0;
+}
+
+static int
+nv04_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
+			struct drm_framebuffer *old_fb)
+{
+	int ret = nv_crtc_swap_fbs(crtc, old_fb);
+	if (ret)
+		return ret;
+	return nv04_crtc_do_mode_set_base(crtc, old_fb, x, y, false);
+}
+
+static int
+nv04_crtc_mode_set_base_atomic(struct drm_crtc *crtc,
+			       struct drm_framebuffer *fb,
+			       int x, int y, enum mode_set_atomic state)
+{
+	struct nouveau_drm *drm = nouveau_drm(crtc->dev);
+	struct drm_device *dev = drm->dev;
+
+	if (state == ENTER_ATOMIC_MODE_SET)
+		nouveau_fbcon_accel_save_disable(dev);
+	else
+		nouveau_fbcon_accel_restore(dev);
+
+	return nv04_crtc_do_mode_set_base(crtc, fb, x, y, true);
+}
+
+static void nv04_cursor_upload(struct drm_device *dev, struct nouveau_bo *src,
+			       struct nouveau_bo *dst)
+{
+	int width = nv_cursor_width(dev);
+	uint32_t pixel;
+	int i, j;
+
+	for (i = 0; i < width; i++) {
+		for (j = 0; j < width; j++) {
+			pixel = nouveau_bo_rd32(src, i*64 + j);
+
+			nouveau_bo_wr16(dst, i*width + j, (pixel & 0x80000000) >> 16
+				     | (pixel & 0xf80000) >> 9
+				     | (pixel & 0xf800) >> 6
+				     | (pixel & 0xf8) >> 3);
+		}
+	}
+}
+
+static void nv11_cursor_upload(struct drm_device *dev, struct nouveau_bo *src,
+			       struct nouveau_bo *dst)
+{
+	uint32_t pixel;
+	int alpha, i;
+
+	/* nv11+ supports premultiplied (PM), or non-premultiplied (NPM) alpha
+	 * cursors (though NPM in combination with fp dithering may not work on
+	 * nv11, from "nv" driver history)
+	 * NPM mode needs NV_PCRTC_CURSOR_CONFIG_ALPHA_BLEND set and is what the
+	 * blob uses, however we get given PM cursors so we use PM mode
+	 */
+	for (i = 0; i < 64 * 64; i++) {
+		pixel = nouveau_bo_rd32(src, i);
+
+		/* hw gets unhappy if alpha <= rgb values.  for a PM image "less
+		 * than" shouldn't happen; fix "equal to" case by adding one to
+		 * alpha channel (slightly inaccurate, but so is attempting to
+		 * get back to NPM images, due to limits of integer precision)
+		 */
+		alpha = pixel >> 24;
+		if (alpha > 0 && alpha < 255)
+			pixel = (pixel & 0x00ffffff) | ((alpha + 1) << 24);
+
+#ifdef __BIG_ENDIAN
+		{
+			struct nouveau_drm *drm = nouveau_drm(dev);
+
+			if (drm->client.device.info.chipset == 0x11) {
+				pixel = ((pixel & 0x000000ff) << 24) |
+					((pixel & 0x0000ff00) << 8) |
+					((pixel & 0x00ff0000) >> 8) |
+					((pixel & 0xff000000) >> 24);
+			}
+		}
+#endif
+
+		nouveau_bo_wr32(dst, i, pixel);
+	}
+}
+
+static int
+nv04_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv,
+		     uint32_t buffer_handle, uint32_t width, uint32_t height)
+{
+	struct nouveau_drm *drm = nouveau_drm(crtc->dev);
+	struct drm_device *dev = drm->dev;
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+	struct nouveau_bo *cursor = NULL;
+	struct drm_gem_object *gem;
+	int ret = 0;
+
+	if (!buffer_handle) {
+		nv_crtc->cursor.hide(nv_crtc, true);
+		return 0;
+	}
+
+	if (width != 64 || height != 64)
+		return -EINVAL;
+
+	gem = drm_gem_object_lookup(file_priv, buffer_handle);
+	if (!gem)
+		return -ENOENT;
+	cursor = nouveau_gem_object(gem);
+
+	ret = nouveau_bo_map(cursor);
+	if (ret)
+		goto out;
+
+	if (drm->client.device.info.chipset >= 0x11)
+		nv11_cursor_upload(dev, cursor, nv_crtc->cursor.nvbo);
+	else
+		nv04_cursor_upload(dev, cursor, nv_crtc->cursor.nvbo);
+
+	nouveau_bo_unmap(cursor);
+	nv_crtc->cursor.offset = nv_crtc->cursor.nvbo->bo.offset;
+	nv_crtc->cursor.set_offset(nv_crtc, nv_crtc->cursor.offset);
+	nv_crtc->cursor.show(nv_crtc, true);
+out:
+	drm_gem_object_put_unlocked(gem);
+	return ret;
+}
+
+static int
+nv04_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
+{
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
+
+	nv_crtc->cursor.set_pos(nv_crtc, x, y);
+	return 0;
+}
+
+static int
+nouveau_crtc_set_config(struct drm_mode_set *set,
+			struct drm_modeset_acquire_ctx *ctx)
+{
+	struct drm_device *dev;
+	struct nouveau_drm *drm;
+	int ret;
+	struct drm_crtc *crtc;
+	bool active = false;
+	if (!set || !set->crtc)
+		return -EINVAL;
+
+	dev = set->crtc->dev;
+
+	/* get a pm reference here */
+	ret = pm_runtime_get_sync(dev->dev);
+	if (ret < 0 && ret != -EACCES)
+		return ret;
+
+	ret = drm_crtc_helper_set_config(set, ctx);
+
+	drm = nouveau_drm(dev);
+
+	/* if we get here with no crtcs active then we can drop a reference */
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		if (crtc->enabled)
+			active = true;
+	}
+
+	pm_runtime_mark_last_busy(dev->dev);
+	/* if we have active crtcs and we don't have a power ref,
+	   take the current one */
+	if (active && !drm->have_disp_power_ref) {
+		drm->have_disp_power_ref = true;
+		return ret;
+	}
+	/* if we have no active crtcs, then drop the power ref
+	   we got before */
+	if (!active && drm->have_disp_power_ref) {
+		pm_runtime_put_autosuspend(dev->dev);
+		drm->have_disp_power_ref = false;
+	}
+	/* drop the power reference we got coming in here */
+	pm_runtime_put_autosuspend(dev->dev);
+	return ret;
+}
+
+static const struct drm_crtc_funcs nv04_crtc_funcs = {
+	.cursor_set = nv04_crtc_cursor_set,
+	.cursor_move = nv04_crtc_cursor_move,
+	.gamma_set = nv_crtc_gamma_set,
+	.set_config = nouveau_crtc_set_config,
+	.page_flip = nouveau_crtc_page_flip,
+	.destroy = nv_crtc_destroy,
+};
+
+static const struct drm_crtc_helper_funcs nv04_crtc_helper_funcs = {
+	.dpms = nv_crtc_dpms,
+	.prepare = nv_crtc_prepare,
+	.commit = nv_crtc_commit,
+	.mode_set = nv_crtc_mode_set,
+	.mode_set_base = nv04_crtc_mode_set_base,
+	.mode_set_base_atomic = nv04_crtc_mode_set_base_atomic,
+	.disable = nv_crtc_disable,
+};
+
+static const uint32_t modeset_formats[] = {
+        DRM_FORMAT_XRGB8888,
+        DRM_FORMAT_RGB565,
+        DRM_FORMAT_XRGB1555,
+};
+
+static struct drm_plane *
+create_primary_plane(struct drm_device *dev)
+{
+        struct drm_plane *primary;
+        int ret;
+
+        primary = kzalloc(sizeof(*primary), GFP_KERNEL);
+        if (primary == NULL) {
+                DRM_DEBUG_KMS("Failed to allocate primary plane\n");
+                return NULL;
+        }
+
+        /* possible_crtc's will be filled in later by crtc_init */
+        ret = drm_universal_plane_init(dev, primary, 0,
+                                       &drm_primary_helper_funcs,
+                                       modeset_formats,
+                                       ARRAY_SIZE(modeset_formats), NULL,
+                                       DRM_PLANE_TYPE_PRIMARY, NULL);
+        if (ret) {
+                kfree(primary);
+                primary = NULL;
+        }
+
+        return primary;
+}
+
+int
+nv04_crtc_create(struct drm_device *dev, int crtc_num)
+{
+	struct nouveau_crtc *nv_crtc;
+	int ret;
+
+	nv_crtc = kzalloc(sizeof(*nv_crtc), GFP_KERNEL);
+	if (!nv_crtc)
+		return -ENOMEM;
+
+	nv_crtc->lut.depth = 0;
+
+	nv_crtc->index = crtc_num;
+	nv_crtc->last_dpms = NV_DPMS_CLEARED;
+
+	nv_crtc->save = nv_crtc_save;
+	nv_crtc->restore = nv_crtc_restore;
+
+	drm_crtc_init_with_planes(dev, &nv_crtc->base,
+                                  create_primary_plane(dev), NULL,
+                                  &nv04_crtc_funcs, NULL);
+	drm_crtc_helper_add(&nv_crtc->base, &nv04_crtc_helper_funcs);
+	drm_mode_crtc_set_gamma_size(&nv_crtc->base, 256);
+
+	ret = nouveau_bo_new(&nouveau_drm(dev)->client, 64*64*4, 0x100,
+			     TTM_PL_FLAG_VRAM, 0, 0x0000, NULL, NULL,
+			     &nv_crtc->cursor.nvbo);
+	if (!ret) {
+		ret = nouveau_bo_pin(nv_crtc->cursor.nvbo, TTM_PL_FLAG_VRAM, false);
+		if (!ret) {
+			ret = nouveau_bo_map(nv_crtc->cursor.nvbo);
+			if (ret)
+				nouveau_bo_unpin(nv_crtc->cursor.nvbo);
+		}
+		if (ret)
+			nouveau_bo_ref(NULL, &nv_crtc->cursor.nvbo);
+	}
+
+	nv04_cursor_init(nv_crtc);
+
+	return 0;
+}