Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1349 insertions, 0 deletions

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
new file mode 100644
index 000000000..113c032a2
--- /dev/null
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -0,0 +1,1349 @@
+/*
+ * Copyright (C) 2015 Free Electrons
+ * Copyright (C) 2015 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_encoder.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_of.h>
+
+#include <uapi/drm/drm_mode.h>
+
+#include <linux/component.h>
+#include <linux/ioport.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include "sun4i_crtc.h"
+#include "sun4i_dotclock.h"
+#include "sun4i_drv.h"
+#include "sun4i_lvds.h"
+#include "sun4i_rgb.h"
+#include "sun4i_tcon.h"
+#include "sun6i_mipi_dsi.h"
+#include "sunxi_engine.h"
+
+static struct drm_connector *sun4i_tcon_get_connector(const struct drm_encoder *encoder)
+{
+	struct drm_connector *connector;
+	struct drm_connector_list_iter iter;
+
+	drm_connector_list_iter_begin(encoder->dev, &iter);
+	drm_for_each_connector_iter(connector, &iter)
+		if (connector->encoder == encoder) {
+			drm_connector_list_iter_end(&iter);
+			return connector;
+		}
+	drm_connector_list_iter_end(&iter);
+
+	return NULL;
+}
+
+static int sun4i_tcon_get_pixel_depth(const struct drm_encoder *encoder)
+{
+	struct drm_connector *connector;
+	struct drm_display_info *info;
+
+	connector = sun4i_tcon_get_connector(encoder);
+	if (!connector)
+		return -EINVAL;
+
+	info = &connector->display_info;
+	if (info->num_bus_formats != 1)
+		return -EINVAL;
+
+	switch (info->bus_formats[0]) {
+	case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
+		return 18;
+
+	case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
+	case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
+		return 24;
+	}
+
+	return -EINVAL;
+}
+
+static void sun4i_tcon_channel_set_status(struct sun4i_tcon *tcon, int channel,
+					  bool enabled)
+{
+	struct clk *clk;
+
+	switch (channel) {
+	case 0:
+		WARN_ON(!tcon->quirks->has_channel_0);
+		regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
+				   SUN4I_TCON0_CTL_TCON_ENABLE,
+				   enabled ? SUN4I_TCON0_CTL_TCON_ENABLE : 0);
+		clk = tcon->dclk;
+		break;
+	case 1:
+		WARN_ON(!tcon->quirks->has_channel_1);
+		regmap_update_bits(tcon->regs, SUN4I_TCON1_CTL_REG,
+				   SUN4I_TCON1_CTL_TCON_ENABLE,
+				   enabled ? SUN4I_TCON1_CTL_TCON_ENABLE : 0);
+		clk = tcon->sclk1;
+		break;
+	default:
+		DRM_WARN("Unknown channel... doing nothing\n");
+		return;
+	}
+
+	if (enabled) {
+		clk_prepare_enable(clk);
+		clk_rate_exclusive_get(clk);
+	} else {
+		clk_rate_exclusive_put(clk);
+		clk_disable_unprepare(clk);
+	}
+}
+
+static void sun4i_tcon_lvds_set_status(struct sun4i_tcon *tcon,
+				       const struct drm_encoder *encoder,
+				       bool enabled)
+{
+	if (enabled) {
+		u8 val;
+
+		regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG,
+				   SUN4I_TCON0_LVDS_IF_EN,
+				   SUN4I_TCON0_LVDS_IF_EN);
+
+		/*
+		 * As their name suggest, these values only apply to the A31
+		 * and later SoCs. We'll have to rework this when merging
+		 * support for the older SoCs.
+		 */
+		regmap_write(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
+			     SUN6I_TCON0_LVDS_ANA0_C(2) |
+			     SUN6I_TCON0_LVDS_ANA0_V(3) |
+			     SUN6I_TCON0_LVDS_ANA0_PD(2) |
+			     SUN6I_TCON0_LVDS_ANA0_EN_LDO);
+		udelay(2);
+
+		regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
+				   SUN6I_TCON0_LVDS_ANA0_EN_MB,
+				   SUN6I_TCON0_LVDS_ANA0_EN_MB);
+		udelay(2);
+
+		regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
+				   SUN6I_TCON0_LVDS_ANA0_EN_DRVC,
+				   SUN6I_TCON0_LVDS_ANA0_EN_DRVC);
+
+		if (sun4i_tcon_get_pixel_depth(encoder) == 18)
+			val = 7;
+		else
+			val = 0xf;
+
+		regmap_write_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
+				  SUN6I_TCON0_LVDS_ANA0_EN_DRVD(0xf),
+				  SUN6I_TCON0_LVDS_ANA0_EN_DRVD(val));
+	} else {
+		regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG,
+				   SUN4I_TCON0_LVDS_IF_EN, 0);
+	}
+}
+
+void sun4i_tcon_set_status(struct sun4i_tcon *tcon,
+			   const struct drm_encoder *encoder,
+			   bool enabled)
+{
+	bool is_lvds = false;
+	int channel;
+
+	switch (encoder->encoder_type) {
+	case DRM_MODE_ENCODER_LVDS:
+		is_lvds = true;
+		/* Fallthrough */
+	case DRM_MODE_ENCODER_DSI:
+	case DRM_MODE_ENCODER_NONE:
+		channel = 0;
+		break;
+	case DRM_MODE_ENCODER_TMDS:
+	case DRM_MODE_ENCODER_TVDAC:
+		channel = 1;
+		break;
+	default:
+		DRM_DEBUG_DRIVER("Unknown encoder type, doing nothing...\n");
+		return;
+	}
+
+	if (is_lvds && !enabled)
+		sun4i_tcon_lvds_set_status(tcon, encoder, false);
+
+	regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG,
+			   SUN4I_TCON_GCTL_TCON_ENABLE,
+			   enabled ? SUN4I_TCON_GCTL_TCON_ENABLE : 0);
+
+	if (is_lvds && enabled)
+		sun4i_tcon_lvds_set_status(tcon, encoder, true);
+
+	sun4i_tcon_channel_set_status(tcon, channel, enabled);
+}
+
+void sun4i_tcon_enable_vblank(struct sun4i_tcon *tcon, bool enable)
+{
+	u32 mask, val = 0;
+
+	DRM_DEBUG_DRIVER("%sabling VBLANK interrupt\n", enable ? "En" : "Dis");
+
+	mask = SUN4I_TCON_GINT0_VBLANK_ENABLE(0) |
+		SUN4I_TCON_GINT0_VBLANK_ENABLE(1) |
+		SUN4I_TCON_GINT0_TCON0_TRI_FINISH_ENABLE;
+
+	if (enable)
+		val = mask;
+
+	regmap_update_bits(tcon->regs, SUN4I_TCON_GINT0_REG, mask, val);
+}
+EXPORT_SYMBOL(sun4i_tcon_enable_vblank);
+
+/*
+ * This function is a helper for TCON output muxing. The TCON output
+ * muxing control register in earlier SoCs (without the TCON TOP block)
+ * are located in TCON0. This helper returns a pointer to TCON0's
+ * sun4i_tcon structure, or NULL if not found.
+ */
+static struct sun4i_tcon *sun4i_get_tcon0(struct drm_device *drm)
+{
+	struct sun4i_drv *drv = drm->dev_private;
+	struct sun4i_tcon *tcon;
+
+	list_for_each_entry(tcon, &drv->tcon_list, list)
+		if (tcon->id == 0)
+			return tcon;
+
+	dev_warn(drm->dev,
+		 "TCON0 not found, display output muxing may not work\n");
+
+	return NULL;
+}
+
+void sun4i_tcon_set_mux(struct sun4i_tcon *tcon, int channel,
+			const struct drm_encoder *encoder)
+{
+	int ret = -ENOTSUPP;
+
+	if (tcon->quirks->set_mux)
+		ret = tcon->quirks->set_mux(tcon, encoder);
+
+	DRM_DEBUG_DRIVER("Muxing encoder %s to CRTC %s: %d\n",
+			 encoder->name, encoder->crtc->name, ret);
+}
+
+static int sun4i_tcon_get_clk_delay(const struct drm_display_mode *mode,
+				    int channel)
+{
+	int delay = mode->vtotal - mode->vdisplay;
+
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		delay /= 2;
+
+	if (channel == 1)
+		delay -= 2;
+
+	delay = min(delay, 30);
+
+	DRM_DEBUG_DRIVER("TCON %d clock delay %u\n", channel, delay);
+
+	return delay;
+}
+
+static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
+					const struct drm_display_mode *mode)
+{
+	/* Configure the dot clock */
+	clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
+
+	/* Set the resolution */
+	regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
+		     SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
+		     SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
+}
+
+static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon,
+				     struct mipi_dsi_device *device,
+				     const struct drm_display_mode *mode)
+{
+	u8 bpp = mipi_dsi_pixel_format_to_bpp(device->format);
+	u8 lanes = device->lanes;
+	u32 block_space, start_delay;
+	u32 tcon_div;
+
+	tcon->dclk_min_div = 4;
+	tcon->dclk_max_div = 127;
+
+	sun4i_tcon0_mode_set_common(tcon, mode);
+
+	regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
+			   SUN4I_TCON0_CTL_IF_MASK,
+			   SUN4I_TCON0_CTL_IF_8080);
+
+	regmap_write(tcon->regs, SUN4I_TCON_ECC_FIFO_REG,
+		     SUN4I_TCON_ECC_FIFO_EN);
+
+	regmap_write(tcon->regs, SUN4I_TCON0_CPU_IF_REG,
+		     SUN4I_TCON0_CPU_IF_MODE_DSI |
+		     SUN4I_TCON0_CPU_IF_TRI_FIFO_FLUSH |
+		     SUN4I_TCON0_CPU_IF_TRI_FIFO_EN |
+		     SUN4I_TCON0_CPU_IF_TRI_EN);
+
+	/*
+	 * This looks suspicious, but it works...
+	 *
+	 * The datasheet says that this should be set higher than 20 *
+	 * pixel cycle, but it's not clear what a pixel cycle is.
+	 */
+	regmap_read(tcon->regs, SUN4I_TCON0_DCLK_REG, &tcon_div);
+	tcon_div &= GENMASK(6, 0);
+	block_space = mode->htotal * bpp / (tcon_div * lanes);
+	block_space -= mode->hdisplay + 40;
+
+	regmap_write(tcon->regs, SUN4I_TCON0_CPU_TRI0_REG,
+		     SUN4I_TCON0_CPU_TRI0_BLOCK_SPACE(block_space) |
+		     SUN4I_TCON0_CPU_TRI0_BLOCK_SIZE(mode->hdisplay));
+
+	regmap_write(tcon->regs, SUN4I_TCON0_CPU_TRI1_REG,
+		     SUN4I_TCON0_CPU_TRI1_BLOCK_NUM(mode->vdisplay));
+
+	start_delay = (mode->crtc_vtotal - mode->crtc_vdisplay - 10 - 1);
+	start_delay = start_delay * mode->crtc_htotal * 149;
+	start_delay = start_delay / (mode->crtc_clock / 1000) / 8;
+	regmap_write(tcon->regs, SUN4I_TCON0_CPU_TRI2_REG,
+		     SUN4I_TCON0_CPU_TRI2_TRANS_START_SET(10) |
+		     SUN4I_TCON0_CPU_TRI2_START_DELAY(start_delay));
+
+	/*
+	 * The Allwinner BSP has a comment that the period should be
+	 * the display clock * 15, but uses an hardcoded 3000...
+	 */
+	regmap_write(tcon->regs, SUN4I_TCON_SAFE_PERIOD_REG,
+		     SUN4I_TCON_SAFE_PERIOD_NUM(3000) |
+		     SUN4I_TCON_SAFE_PERIOD_MODE(3));
+
+	/* Enable the output on the pins */
+	regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG,
+		     0xe0000000);
+}
+
+static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon,
+				      const struct drm_encoder *encoder,
+				      const struct drm_display_mode *mode)
+{
+	unsigned int bp;
+	u8 clk_delay;
+	u32 reg, val = 0;
+
+	WARN_ON(!tcon->quirks->has_channel_0);
+
+	tcon->dclk_min_div = 7;
+	tcon->dclk_max_div = 7;
+	sun4i_tcon0_mode_set_common(tcon, mode);
+
+	/* Adjust clock delay */
+	clk_delay = sun4i_tcon_get_clk_delay(mode, 0);
+	regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
+			   SUN4I_TCON0_CTL_CLK_DELAY_MASK,
+			   SUN4I_TCON0_CTL_CLK_DELAY(clk_delay));
+
+	/*
+	 * This is called a backporch in the register documentation,
+	 * but it really is the back porch + hsync
+	 */
+	bp = mode->crtc_htotal - mode->crtc_hsync_start;
+	DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n",
+			 mode->crtc_htotal, bp);
+
+	/* Set horizontal display timings */
+	regmap_write(tcon->regs, SUN4I_TCON0_BASIC1_REG,
+		     SUN4I_TCON0_BASIC1_H_TOTAL(mode->htotal) |
+		     SUN4I_TCON0_BASIC1_H_BACKPORCH(bp));
+
+	/*
+	 * This is called a backporch in the register documentation,
+	 * but it really is the back porch + hsync
+	 */
+	bp = mode->crtc_vtotal - mode->crtc_vsync_start;
+	DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n",
+			 mode->crtc_vtotal, bp);
+
+	/* Set vertical display timings */
+	regmap_write(tcon->regs, SUN4I_TCON0_BASIC2_REG,
+		     SUN4I_TCON0_BASIC2_V_TOTAL(mode->crtc_vtotal * 2) |
+		     SUN4I_TCON0_BASIC2_V_BACKPORCH(bp));
+
+	reg = SUN4I_TCON0_LVDS_IF_CLK_SEL_TCON0 |
+		SUN4I_TCON0_LVDS_IF_DATA_POL_NORMAL |
+		SUN4I_TCON0_LVDS_IF_CLK_POL_NORMAL;
+	if (sun4i_tcon_get_pixel_depth(encoder) == 24)
+		reg |= SUN4I_TCON0_LVDS_IF_BITWIDTH_24BITS;
+	else
+		reg |= SUN4I_TCON0_LVDS_IF_BITWIDTH_18BITS;
+
+	regmap_write(tcon->regs, SUN4I_TCON0_LVDS_IF_REG, reg);
+
+	/* Setup the polarity of the various signals */
+	if (!(mode->flags & DRM_MODE_FLAG_PHSYNC))
+		val |= SUN4I_TCON0_IO_POL_HSYNC_POSITIVE;
+
+	if (!(mode->flags & DRM_MODE_FLAG_PVSYNC))
+		val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE;
+
+	regmap_write(tcon->regs, SUN4I_TCON0_IO_POL_REG, val);
+
+	/* Map output pins to channel 0 */
+	regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG,
+			   SUN4I_TCON_GCTL_IOMAP_MASK,
+			   SUN4I_TCON_GCTL_IOMAP_TCON0);
+
+	/* Enable the output on the pins */
+	regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG, 0xe0000000);
+}
+
+static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
+				     const struct drm_display_mode *mode)
+{
+	unsigned int bp, hsync, vsync;
+	u8 clk_delay;
+	u32 val = 0;
+
+	WARN_ON(!tcon->quirks->has_channel_0);
+
+	tcon->dclk_min_div = tcon->quirks->dclk_min_div;
+	tcon->dclk_max_div = 127;
+	sun4i_tcon0_mode_set_common(tcon, mode);
+
+	/* Adjust clock delay */
+	clk_delay = sun4i_tcon_get_clk_delay(mode, 0);
+	regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
+			   SUN4I_TCON0_CTL_CLK_DELAY_MASK,
+			   SUN4I_TCON0_CTL_CLK_DELAY(clk_delay));
+
+	/*
+	 * This is called a backporch in the register documentation,
+	 * but it really is the back porch + hsync
+	 */
+	bp = mode->crtc_htotal - mode->crtc_hsync_start;
+	DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n",
+			 mode->crtc_htotal, bp);
+
+	/* Set horizontal display timings */
+	regmap_write(tcon->regs, SUN4I_TCON0_BASIC1_REG,
+		     SUN4I_TCON0_BASIC1_H_TOTAL(mode->crtc_htotal) |
+		     SUN4I_TCON0_BASIC1_H_BACKPORCH(bp));
+
+	/*
+	 * This is called a backporch in the register documentation,
+	 * but it really is the back porch + hsync
+	 */
+	bp = mode->crtc_vtotal - mode->crtc_vsync_start;
+	DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n",
+			 mode->crtc_vtotal, bp);
+
+	/* Set vertical display timings */
+	regmap_write(tcon->regs, SUN4I_TCON0_BASIC2_REG,
+		     SUN4I_TCON0_BASIC2_V_TOTAL(mode->crtc_vtotal * 2) |
+		     SUN4I_TCON0_BASIC2_V_BACKPORCH(bp));
+
+	/* Set Hsync and Vsync length */
+	hsync = mode->crtc_hsync_end - mode->crtc_hsync_start;
+	vsync = mode->crtc_vsync_end - mode->crtc_vsync_start;
+	DRM_DEBUG_DRIVER("Setting HSYNC %d, VSYNC %d\n", hsync, vsync);
+	regmap_write(tcon->regs, SUN4I_TCON0_BASIC3_REG,
+		     SUN4I_TCON0_BASIC3_V_SYNC(vsync) |
+		     SUN4I_TCON0_BASIC3_H_SYNC(hsync));
+
+	/* Setup the polarity of the various signals */
+	if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+		val |= SUN4I_TCON0_IO_POL_HSYNC_POSITIVE;
+
+	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+		val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE;
+
+	regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG,
+			   SUN4I_TCON0_IO_POL_HSYNC_POSITIVE | SUN4I_TCON0_IO_POL_VSYNC_POSITIVE,
+			   val);
+
+	/* Map output pins to channel 0 */
+	regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG,
+			   SUN4I_TCON_GCTL_IOMAP_MASK,
+			   SUN4I_TCON_GCTL_IOMAP_TCON0);
+
+	/* Enable the output on the pins */
+	regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG, 0);
+}
+
+static void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon,
+				 const struct drm_display_mode *mode)
+{
+	unsigned int bp, hsync, vsync, vtotal;
+	u8 clk_delay;
+	u32 val;
+
+	WARN_ON(!tcon->quirks->has_channel_1);
+
+	/* Configure the dot clock */
+	clk_set_rate(tcon->sclk1, mode->crtc_clock * 1000);
+
+	/* Adjust clock delay */
+	clk_delay = sun4i_tcon_get_clk_delay(mode, 1);
+	regmap_update_bits(tcon->regs, SUN4I_TCON1_CTL_REG,
+			   SUN4I_TCON1_CTL_CLK_DELAY_MASK,
+			   SUN4I_TCON1_CTL_CLK_DELAY(clk_delay));
+
+	/* Set interlaced mode */
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		val = SUN4I_TCON1_CTL_INTERLACE_ENABLE;
+	else
+		val = 0;
+	regmap_update_bits(tcon->regs, SUN4I_TCON1_CTL_REG,
+			   SUN4I_TCON1_CTL_INTERLACE_ENABLE,
+			   val);
+
+	/* Set the input resolution */
+	regmap_write(tcon->regs, SUN4I_TCON1_BASIC0_REG,
+		     SUN4I_TCON1_BASIC0_X(mode->crtc_hdisplay) |
+		     SUN4I_TCON1_BASIC0_Y(mode->crtc_vdisplay));
+
+	/* Set the upscaling resolution */
+	regmap_write(tcon->regs, SUN4I_TCON1_BASIC1_REG,
+		     SUN4I_TCON1_BASIC1_X(mode->crtc_hdisplay) |
+		     SUN4I_TCON1_BASIC1_Y(mode->crtc_vdisplay));
+
+	/* Set the output resolution */
+	regmap_write(tcon->regs, SUN4I_TCON1_BASIC2_REG,
+		     SUN4I_TCON1_BASIC2_X(mode->crtc_hdisplay) |
+		     SUN4I_TCON1_BASIC2_Y(mode->crtc_vdisplay));
+
+	/* Set horizontal display timings */
+	bp = mode->crtc_htotal - mode->crtc_hsync_start;
+	DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n",
+			 mode->htotal, bp);
+	regmap_write(tcon->regs, SUN4I_TCON1_BASIC3_REG,
+		     SUN4I_TCON1_BASIC3_H_TOTAL(mode->crtc_htotal) |
+		     SUN4I_TCON1_BASIC3_H_BACKPORCH(bp));
+
+	bp = mode->crtc_vtotal - mode->crtc_vsync_start;
+	DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n",
+			 mode->crtc_vtotal, bp);
+
+	/*
+	 * The vertical resolution needs to be doubled in all
+	 * cases. We could use crtc_vtotal and always multiply by two,
+	 * but that leads to a rounding error in interlace when vtotal
+	 * is odd.
+	 *
+	 * This happens with TV's PAL for example, where vtotal will
+	 * be 625, crtc_vtotal 312, and thus crtc_vtotal * 2 will be
+	 * 624, which apparently confuses the hardware.
+	 *
+	 * To work around this, we will always use vtotal, and
+	 * multiply by two only if we're not in interlace.
+	 */
+	vtotal = mode->vtotal;
+	if (!(mode->flags & DRM_MODE_FLAG_INTERLACE))
+		vtotal = vtotal * 2;
+
+	/* Set vertical display timings */
+	regmap_write(tcon->regs, SUN4I_TCON1_BASIC4_REG,
+		     SUN4I_TCON1_BASIC4_V_TOTAL(vtotal) |
+		     SUN4I_TCON1_BASIC4_V_BACKPORCH(bp));
+
+	/* Set Hsync and Vsync length */
+	hsync = mode->crtc_hsync_end - mode->crtc_hsync_start;
+	vsync = mode->crtc_vsync_end - mode->crtc_vsync_start;
+	DRM_DEBUG_DRIVER("Setting HSYNC %d, VSYNC %d\n", hsync, vsync);
+	regmap_write(tcon->regs, SUN4I_TCON1_BASIC5_REG,
+		     SUN4I_TCON1_BASIC5_V_SYNC(vsync) |
+		     SUN4I_TCON1_BASIC5_H_SYNC(hsync));
+
+	/* Map output pins to channel 1 */
+	regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG,
+			   SUN4I_TCON_GCTL_IOMAP_MASK,
+			   SUN4I_TCON_GCTL_IOMAP_TCON1);
+}
+
+void sun4i_tcon_mode_set(struct sun4i_tcon *tcon,
+			 const struct drm_encoder *encoder,
+			 const struct drm_display_mode *mode)
+{
+	struct sun6i_dsi *dsi;
+
+	switch (encoder->encoder_type) {
+	case DRM_MODE_ENCODER_DSI:
+		/*
+		 * This is not really elegant, but it's the "cleaner"
+		 * way I could think of...
+		 */
+		dsi = encoder_to_sun6i_dsi(encoder);
+		sun4i_tcon0_mode_set_cpu(tcon, dsi->device, mode);
+		break;
+	case DRM_MODE_ENCODER_LVDS:
+		sun4i_tcon0_mode_set_lvds(tcon, encoder, mode);
+		break;
+	case DRM_MODE_ENCODER_NONE:
+		sun4i_tcon0_mode_set_rgb(tcon, mode);
+		sun4i_tcon_set_mux(tcon, 0, encoder);
+		break;
+	case DRM_MODE_ENCODER_TVDAC:
+	case DRM_MODE_ENCODER_TMDS:
+		sun4i_tcon1_mode_set(tcon, mode);
+		sun4i_tcon_set_mux(tcon, 1, encoder);
+		break;
+	default:
+		DRM_DEBUG_DRIVER("Unknown encoder type, doing nothing...\n");
+	}
+}
+EXPORT_SYMBOL(sun4i_tcon_mode_set);
+
+static void sun4i_tcon_finish_page_flip(struct drm_device *dev,
+					struct sun4i_crtc *scrtc)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->event_lock, flags);
+	if (scrtc->event) {
+		drm_crtc_send_vblank_event(&scrtc->crtc, scrtc->event);
+		drm_crtc_vblank_put(&scrtc->crtc);
+		scrtc->event = NULL;
+	}
+	spin_unlock_irqrestore(&dev->event_lock, flags);
+}
+
+static irqreturn_t sun4i_tcon_handler(int irq, void *private)
+{
+	struct sun4i_tcon *tcon = private;
+	struct drm_device *drm = tcon->drm;
+	struct sun4i_crtc *scrtc = tcon->crtc;
+	struct sunxi_engine *engine = scrtc->engine;
+	unsigned int status;
+
+	regmap_read(tcon->regs, SUN4I_TCON_GINT0_REG, &status);
+
+	if (!(status & (SUN4I_TCON_GINT0_VBLANK_INT(0) |
+			SUN4I_TCON_GINT0_VBLANK_INT(1) |
+			SUN4I_TCON_GINT0_TCON0_TRI_FINISH_INT)))
+		return IRQ_NONE;
+
+	drm_crtc_handle_vblank(&scrtc->crtc);
+	sun4i_tcon_finish_page_flip(drm, scrtc);
+
+	/* Acknowledge the interrupt */
+	regmap_update_bits(tcon->regs, SUN4I_TCON_GINT0_REG,
+			   SUN4I_TCON_GINT0_VBLANK_INT(0) |
+			   SUN4I_TCON_GINT0_VBLANK_INT(1) |
+			   SUN4I_TCON_GINT0_TCON0_TRI_FINISH_INT,
+			   0);
+
+	if (engine->ops->vblank_quirk)
+		engine->ops->vblank_quirk(engine);
+
+	return IRQ_HANDLED;
+}
+
+static int sun4i_tcon_init_clocks(struct device *dev,
+				  struct sun4i_tcon *tcon)
+{
+	tcon->clk = devm_clk_get(dev, "ahb");
+	if (IS_ERR(tcon->clk)) {
+		dev_err(dev, "Couldn't get the TCON bus clock\n");
+		return PTR_ERR(tcon->clk);
+	}
+	clk_prepare_enable(tcon->clk);
+
+	if (tcon->quirks->has_channel_0) {
+		tcon->sclk0 = devm_clk_get(dev, "tcon-ch0");
+		if (IS_ERR(tcon->sclk0)) {
+			dev_err(dev, "Couldn't get the TCON channel 0 clock\n");
+			return PTR_ERR(tcon->sclk0);
+		}
+	}
+	clk_prepare_enable(tcon->sclk0);
+
+	if (tcon->quirks->has_channel_1) {
+		tcon->sclk1 = devm_clk_get(dev, "tcon-ch1");
+		if (IS_ERR(tcon->sclk1)) {
+			dev_err(dev, "Couldn't get the TCON channel 1 clock\n");
+			return PTR_ERR(tcon->sclk1);
+		}
+	}
+
+	return 0;
+}
+
+static void sun4i_tcon_free_clocks(struct sun4i_tcon *tcon)
+{
+	clk_disable_unprepare(tcon->sclk0);
+	clk_disable_unprepare(tcon->clk);
+}
+
+static int sun4i_tcon_init_irq(struct device *dev,
+			       struct sun4i_tcon *tcon)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	int irq, ret;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "Couldn't retrieve the TCON interrupt\n");
+		return irq;
+	}
+
+	ret = devm_request_irq(dev, irq, sun4i_tcon_handler, 0,
+			       dev_name(dev), tcon);
+	if (ret) {
+		dev_err(dev, "Couldn't request the IRQ\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct regmap_config sun4i_tcon_regmap_config = {
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+	.max_register	= 0x800,
+};
+
+static int sun4i_tcon_init_regmap(struct device *dev,
+				  struct sun4i_tcon *tcon)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct resource *res;
+	void __iomem *regs;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	tcon->regs = devm_regmap_init_mmio(dev, regs,
+					   &sun4i_tcon_regmap_config);
+	if (IS_ERR(tcon->regs)) {
+		dev_err(dev, "Couldn't create the TCON regmap\n");
+		return PTR_ERR(tcon->regs);
+	}
+
+	/* Make sure the TCON is disabled and all IRQs are off */
+	regmap_write(tcon->regs, SUN4I_TCON_GCTL_REG, 0);
+	regmap_write(tcon->regs, SUN4I_TCON_GINT0_REG, 0);
+	regmap_write(tcon->regs, SUN4I_TCON_GINT1_REG, 0);
+
+	/* Disable IO lines and set them to tristate */
+	regmap_write(tcon->regs, SUN4I_TCON0_IO_TRI_REG, ~0);
+	regmap_write(tcon->regs, SUN4I_TCON1_IO_TRI_REG, ~0);
+
+	return 0;
+}
+
+/*
+ * On SoCs with the old display pipeline design (Display Engine 1.0),
+ * the TCON is always tied to just one backend. Hence we can traverse
+ * the of_graph upwards to find the backend our tcon is connected to,
+ * and take its ID as our own.
+ *
+ * We can either identify backends from their compatible strings, which
+ * means maintaining a large list of them. Or, since the backend is
+ * registered and binded before the TCON, we can just go through the
+ * list of registered backends and compare the device node.
+ *
+ * As the structures now store engines instead of backends, here this
+ * function in fact searches the corresponding engine, and the ID is
+ * requested via the get_id function of the engine.
+ */
+static struct sunxi_engine *
+sun4i_tcon_find_engine_traverse(struct sun4i_drv *drv,
+				struct device_node *node,
+				u32 port_id)
+{
+	struct device_node *port, *ep, *remote;
+	struct sunxi_engine *engine = ERR_PTR(-EINVAL);
+	u32 reg = 0;
+
+	port = of_graph_get_port_by_id(node, port_id);
+	if (!port)
+		return ERR_PTR(-EINVAL);
+
+	/*
+	 * This only works if there is only one path from the TCON
+	 * to any display engine. Otherwise the probe order of the
+	 * TCONs and display engines is not guaranteed. They may
+	 * either bind to the wrong one, or worse, bind to the same
+	 * one if additional checks are not done.
+	 *
+	 * Bail out if there are multiple input connections.
+	 */
+	if (of_get_available_child_count(port) != 1)
+		goto out_put_port;
+
+	/* Get the first connection without specifying an ID */
+	ep = of_get_next_available_child(port, NULL);
+	if (!ep)
+		goto out_put_port;
+
+	remote = of_graph_get_remote_port_parent(ep);
+	if (!remote)
+		goto out_put_ep;
+
+	/* does this node match any registered engines? */
+	list_for_each_entry(engine, &drv->engine_list, list)
+		if (remote == engine->node)
+			goto out_put_remote;
+
+	/*
+	 * According to device tree binding input ports have even id
+	 * number and output ports have odd id. Since component with
+	 * more than one input and one output (TCON TOP) exits, correct
+	 * remote input id has to be calculated by subtracting 1 from
+	 * remote output id. If this for some reason can't be done, 0
+	 * is used as input port id.
+	 */
+	of_node_put(port);
+	port = of_graph_get_remote_port(ep);
+	if (!of_property_read_u32(port, "reg", &reg) && reg > 0)
+		reg -= 1;
+
+	/* keep looking through upstream ports */
+	engine = sun4i_tcon_find_engine_traverse(drv, remote, reg);
+
+out_put_remote:
+	of_node_put(remote);
+out_put_ep:
+	of_node_put(ep);
+out_put_port:
+	of_node_put(port);
+
+	return engine;
+}
+
+/*
+ * The device tree binding says that the remote endpoint ID of any
+ * connection between components, up to and including the TCON, of
+ * the display pipeline should be equal to the actual ID of the local
+ * component. Thus we can look at any one of the input connections of
+ * the TCONs, and use that connection's remote endpoint ID as our own.
+ *
+ * Since the user of this function already finds the input port,
+ * the port is passed in directly without further checks.
+ */
+static int sun4i_tcon_of_get_id_from_port(struct device_node *port)
+{
+	struct device_node *ep;
+	int ret = -EINVAL;
+
+	/* try finding an upstream endpoint */
+	for_each_available_child_of_node(port, ep) {
+		struct device_node *remote;
+		u32 reg;
+
+		remote = of_graph_get_remote_endpoint(ep);
+		if (!remote)
+			continue;
+
+		ret = of_property_read_u32(remote, "reg", &reg);
+		if (ret)
+			continue;
+
+		ret = reg;
+	}
+
+	return ret;
+}
+
+/*
+ * Once we know the TCON's id, we can look through the list of
+ * engines to find a matching one. We assume all engines have
+ * been probed and added to the list.
+ */
+static struct sunxi_engine *sun4i_tcon_get_engine_by_id(struct sun4i_drv *drv,
+							int id)
+{
+	struct sunxi_engine *engine;
+
+	list_for_each_entry(engine, &drv->engine_list, list)
+		if (engine->id == id)
+			return engine;
+
+	return ERR_PTR(-EINVAL);
+}
+
+/*
+ * On SoCs with the old display pipeline design (Display Engine 1.0),
+ * we assumed the TCON was always tied to just one backend. However
+ * this proved not to be the case. On the A31, the TCON can select
+ * either backend as its source. On the A20 (and likely on the A10),
+ * the backend can choose which TCON to output to.
+ *
+ * The device tree binding says that the remote endpoint ID of any
+ * connection between components, up to and including the TCON, of
+ * the display pipeline should be equal to the actual ID of the local
+ * component. Thus we should be able to look at any one of the input
+ * connections of the TCONs, and use that connection's remote endpoint
+ * ID as our own.
+ *
+ * However  the connections between the backend and TCON were assumed
+ * to be always singular, and their endpoit IDs were all incorrectly
+ * set to 0. This means for these old device trees, we cannot just look
+ * up the remote endpoint ID of a TCON input endpoint. TCON1 would be
+ * incorrectly identified as TCON0.
+ *
+ * This function first checks if the TCON node has 2 input endpoints.
+ * If so, then the device tree is a corrected version, and it will use
+ * sun4i_tcon_of_get_id() and sun4i_tcon_get_engine_by_id() from above
+ * to fetch the ID and engine directly. If not, then it is likely an
+ * old device trees, where the endpoint IDs were incorrect, but did not
+ * have endpoint connections between the backend and TCON across
+ * different display pipelines. It will fall back to the old method of
+ * traversing the  of_graph to try and find a matching engine by device
+ * node.
+ *
+ * In the case of single display pipeline device trees, either method
+ * works.
+ */
+static struct sunxi_engine *sun4i_tcon_find_engine(struct sun4i_drv *drv,
+						   struct device_node *node)
+{
+	struct device_node *port;
+	struct sunxi_engine *engine;
+
+	port = of_graph_get_port_by_id(node, 0);
+	if (!port)
+		return ERR_PTR(-EINVAL);
+
+	/*
+	 * Is this a corrected device tree with cross pipeline
+	 * connections between the backend and TCON?
+	 */
+	if (of_get_child_count(port) > 1) {
+		/* Get our ID directly from an upstream endpoint */
+		int id = sun4i_tcon_of_get_id_from_port(port);
+
+		/* Get our engine by matching our ID */
+		engine = sun4i_tcon_get_engine_by_id(drv, id);
+
+		of_node_put(port);
+		return engine;
+	}
+
+	/* Fallback to old method by traversing input endpoints */
+	of_node_put(port);
+	return sun4i_tcon_find_engine_traverse(drv, node, 0);
+}
+
+static int sun4i_tcon_bind(struct device *dev, struct device *master,
+			   void *data)
+{
+	struct drm_device *drm = data;
+	struct sun4i_drv *drv = drm->dev_private;
+	struct sunxi_engine *engine;
+	struct device_node *remote;
+	struct sun4i_tcon *tcon;
+	struct reset_control *edp_rstc;
+	bool has_lvds_rst, has_lvds_alt, can_lvds;
+	int ret;
+
+	engine = sun4i_tcon_find_engine(drv, dev->of_node);
+	if (IS_ERR(engine)) {
+		dev_err(dev, "Couldn't find matching engine\n");
+		return -EPROBE_DEFER;
+	}
+
+	tcon = devm_kzalloc(dev, sizeof(*tcon), GFP_KERNEL);
+	if (!tcon)
+		return -ENOMEM;
+	dev_set_drvdata(dev, tcon);
+	tcon->drm = drm;
+	tcon->dev = dev;
+	tcon->id = engine->id;
+	tcon->quirks = of_device_get_match_data(dev);
+
+	tcon->lcd_rst = devm_reset_control_get(dev, "lcd");
+	if (IS_ERR(tcon->lcd_rst)) {
+		dev_err(dev, "Couldn't get our reset line\n");
+		return PTR_ERR(tcon->lcd_rst);
+	}
+
+	if (tcon->quirks->needs_edp_reset) {
+		edp_rstc = devm_reset_control_get_shared(dev, "edp");
+		if (IS_ERR(edp_rstc)) {
+			dev_err(dev, "Couldn't get edp reset line\n");
+			return PTR_ERR(edp_rstc);
+		}
+
+		ret = reset_control_deassert(edp_rstc);
+		if (ret) {
+			dev_err(dev, "Couldn't deassert edp reset line\n");
+			return ret;
+		}
+	}
+
+	/* Make sure our TCON is reset */
+	ret = reset_control_reset(tcon->lcd_rst);
+	if (ret) {
+		dev_err(dev, "Couldn't deassert our reset line\n");
+		return ret;
+	}
+
+	if (tcon->quirks->supports_lvds) {
+		/*
+		 * This can only be made optional since we've had DT
+		 * nodes without the LVDS reset properties.
+		 *
+		 * If the property is missing, just disable LVDS, and
+		 * print a warning.
+		 */
+		tcon->lvds_rst = devm_reset_control_get_optional(dev, "lvds");
+		if (IS_ERR(tcon->lvds_rst)) {
+			dev_err(dev, "Couldn't get our reset line\n");
+			return PTR_ERR(tcon->lvds_rst);
+		} else if (tcon->lvds_rst) {
+			has_lvds_rst = true;
+			reset_control_reset(tcon->lvds_rst);
+		} else {
+			has_lvds_rst = false;
+		}
+
+		/*
+		 * This can only be made optional since we've had DT
+		 * nodes without the LVDS reset properties.
+		 *
+		 * If the property is missing, just disable LVDS, and
+		 * print a warning.
+		 */
+		if (tcon->quirks->has_lvds_alt) {
+			tcon->lvds_pll = devm_clk_get(dev, "lvds-alt");
+			if (IS_ERR(tcon->lvds_pll)) {
+				if (PTR_ERR(tcon->lvds_pll) == -ENOENT) {
+					has_lvds_alt = false;
+				} else {
+					dev_err(dev, "Couldn't get the LVDS PLL\n");
+					return PTR_ERR(tcon->lvds_pll);
+				}
+			} else {
+				has_lvds_alt = true;
+			}
+		}
+
+		if (!has_lvds_rst ||
+		    (tcon->quirks->has_lvds_alt && !has_lvds_alt)) {
+			dev_warn(dev, "Missing LVDS properties, Please upgrade your DT\n");
+			dev_warn(dev, "LVDS output disabled\n");
+			can_lvds = false;
+		} else {
+			can_lvds = true;
+		}
+	} else {
+		can_lvds = false;
+	}
+
+	ret = sun4i_tcon_init_clocks(dev, tcon);
+	if (ret) {
+		dev_err(dev, "Couldn't init our TCON clocks\n");
+		goto err_assert_reset;
+	}
+
+	ret = sun4i_tcon_init_regmap(dev, tcon);
+	if (ret) {
+		dev_err(dev, "Couldn't init our TCON regmap\n");
+		goto err_free_clocks;
+	}
+
+	if (tcon->quirks->has_channel_0) {
+		ret = sun4i_dclk_create(dev, tcon);
+		if (ret) {
+			dev_err(dev, "Couldn't create our TCON dot clock\n");
+			goto err_free_clocks;
+		}
+	}
+
+	ret = sun4i_tcon_init_irq(dev, tcon);
+	if (ret) {
+		dev_err(dev, "Couldn't init our TCON interrupts\n");
+		goto err_free_dotclock;
+	}
+
+	tcon->crtc = sun4i_crtc_init(drm, engine, tcon);
+	if (IS_ERR(tcon->crtc)) {
+		dev_err(dev, "Couldn't create our CRTC\n");
+		ret = PTR_ERR(tcon->crtc);
+		goto err_free_dotclock;
+	}
+
+	if (tcon->quirks->has_channel_0) {
+		/*
+		 * If we have an LVDS panel connected to the TCON, we should
+		 * just probe the LVDS connector. Otherwise, just probe RGB as
+		 * we used to.
+		 */
+		remote = of_graph_get_remote_node(dev->of_node, 1, 0);
+		if (of_device_is_compatible(remote, "panel-lvds"))
+			if (can_lvds)
+				ret = sun4i_lvds_init(drm, tcon);
+			else
+				ret = -EINVAL;
+		else
+			ret = sun4i_rgb_init(drm, tcon);
+		of_node_put(remote);
+
+		if (ret < 0)
+			goto err_free_dotclock;
+	}
+
+	if (tcon->quirks->needs_de_be_mux) {
+		/*
+		 * We assume there is no dynamic muxing of backends
+		 * and TCONs, so we select the backend with same ID.
+		 *
+		 * While dynamic selection might be interesting, since
+		 * the CRTC is tied to the TCON, while the layers are
+		 * tied to the backends, this means, we will need to
+		 * switch between groups of layers. There might not be
+		 * a way to represent this constraint in DRM.
+		 */
+		regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
+				   SUN4I_TCON0_CTL_SRC_SEL_MASK,
+				   tcon->id);
+		regmap_update_bits(tcon->regs, SUN4I_TCON1_CTL_REG,
+				   SUN4I_TCON1_CTL_SRC_SEL_MASK,
+				   tcon->id);
+	}
+
+	list_add_tail(&tcon->list, &drv->tcon_list);
+
+	return 0;
+
+err_free_dotclock:
+	if (tcon->quirks->has_channel_0)
+		sun4i_dclk_free(tcon);
+err_free_clocks:
+	sun4i_tcon_free_clocks(tcon);
+err_assert_reset:
+	reset_control_assert(tcon->lcd_rst);
+	return ret;
+}
+
+static void sun4i_tcon_unbind(struct device *dev, struct device *master,
+			      void *data)
+{
+	struct sun4i_tcon *tcon = dev_get_drvdata(dev);
+
+	list_del(&tcon->list);
+	if (tcon->quirks->has_channel_0)
+		sun4i_dclk_free(tcon);
+	sun4i_tcon_free_clocks(tcon);
+}
+
+static const struct component_ops sun4i_tcon_ops = {
+	.bind	= sun4i_tcon_bind,
+	.unbind	= sun4i_tcon_unbind,
+};
+
+static int sun4i_tcon_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	const struct sun4i_tcon_quirks *quirks;
+	struct drm_bridge *bridge;
+	struct drm_panel *panel;
+	int ret;
+
+	quirks = of_device_get_match_data(&pdev->dev);
+
+	/* panels and bridges are present only on TCONs with channel 0 */
+	if (quirks->has_channel_0) {
+		ret = drm_of_find_panel_or_bridge(node, 1, 0, &panel, &bridge);
+		if (ret == -EPROBE_DEFER)
+			return ret;
+	}
+
+	return component_add(&pdev->dev, &sun4i_tcon_ops);
+}
+
+static int sun4i_tcon_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &sun4i_tcon_ops);
+
+	return 0;
+}
+
+/* platform specific TCON muxing callbacks */
+static int sun4i_a10_tcon_set_mux(struct sun4i_tcon *tcon,
+				  const struct drm_encoder *encoder)
+{
+	struct sun4i_tcon *tcon0 = sun4i_get_tcon0(encoder->dev);
+	u32 shift;
+
+	if (!tcon0)
+		return -EINVAL;
+
+	switch (encoder->encoder_type) {
+	case DRM_MODE_ENCODER_TMDS:
+		/* HDMI */
+		shift = 8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	regmap_update_bits(tcon0->regs, SUN4I_TCON_MUX_CTRL_REG,
+			   0x3 << shift, tcon->id << shift);
+
+	return 0;
+}
+
+static int sun5i_a13_tcon_set_mux(struct sun4i_tcon *tcon,
+				  const struct drm_encoder *encoder)
+{
+	u32 val;
+
+	if (encoder->encoder_type == DRM_MODE_ENCODER_TVDAC)
+		val = 1;
+	else
+		val = 0;
+
+	/*
+	 * FIXME: Undocumented bits
+	 */
+	return regmap_write(tcon->regs, SUN4I_TCON_MUX_CTRL_REG, val);
+}
+
+static int sun6i_tcon_set_mux(struct sun4i_tcon *tcon,
+			      const struct drm_encoder *encoder)
+{
+	struct sun4i_tcon *tcon0 = sun4i_get_tcon0(encoder->dev);
+	u32 shift;
+
+	if (!tcon0)
+		return -EINVAL;
+
+	switch (encoder->encoder_type) {
+	case DRM_MODE_ENCODER_TMDS:
+		/* HDMI */
+		shift = 8;
+		break;
+	default:
+		/* TODO A31 has MIPI DSI but A31s does not */
+		return -EINVAL;
+	}
+
+	regmap_update_bits(tcon0->regs, SUN4I_TCON_MUX_CTRL_REG,
+			   0x3 << shift, tcon->id << shift);
+
+	return 0;
+}
+
+static const struct sun4i_tcon_quirks sun4i_a10_quirks = {
+	.has_channel_0		= true,
+	.has_channel_1		= true,
+	.dclk_min_div		= 4,
+	.set_mux		= sun4i_a10_tcon_set_mux,
+};
+
+static const struct sun4i_tcon_quirks sun5i_a13_quirks = {
+	.has_channel_0		= true,
+	.has_channel_1		= true,
+	.dclk_min_div		= 4,
+	.set_mux		= sun5i_a13_tcon_set_mux,
+};
+
+static const struct sun4i_tcon_quirks sun6i_a31_quirks = {
+	.has_channel_0		= true,
+	.has_channel_1		= true,
+	.has_lvds_alt		= true,
+	.needs_de_be_mux	= true,
+	.dclk_min_div		= 1,
+	.set_mux		= sun6i_tcon_set_mux,
+};
+
+static const struct sun4i_tcon_quirks sun6i_a31s_quirks = {
+	.has_channel_0		= true,
+	.has_channel_1		= true,
+	.needs_de_be_mux	= true,
+	.dclk_min_div		= 1,
+};
+
+static const struct sun4i_tcon_quirks sun7i_a20_quirks = {
+	.has_channel_0		= true,
+	.has_channel_1		= true,
+	.dclk_min_div		= 4,
+	/* Same display pipeline structure as A10 */
+	.set_mux		= sun4i_a10_tcon_set_mux,
+};
+
+static const struct sun4i_tcon_quirks sun8i_a33_quirks = {
+	.has_channel_0		= true,
+	.has_lvds_alt		= true,
+	.dclk_min_div		= 1,
+};
+
+static const struct sun4i_tcon_quirks sun8i_a83t_lcd_quirks = {
+	.supports_lvds		= true,
+	.has_channel_0		= true,
+	.dclk_min_div		= 1,
+};
+
+static const struct sun4i_tcon_quirks sun8i_a83t_tv_quirks = {
+	.has_channel_1		= true,
+};
+
+static const struct sun4i_tcon_quirks sun8i_v3s_quirks = {
+	.has_channel_0		= true,
+	.dclk_min_div		= 1,
+};
+
+static const struct sun4i_tcon_quirks sun9i_a80_tcon_lcd_quirks = {
+	.has_channel_0		= true,
+	.needs_edp_reset	= true,
+	.dclk_min_div		= 1,
+};
+
+static const struct sun4i_tcon_quirks sun9i_a80_tcon_tv_quirks = {
+	.has_channel_1	= true,
+	.needs_edp_reset = true,
+};
+
+/* sun4i_drv uses this list to check if a device node is a TCON */
+const struct of_device_id sun4i_tcon_of_table[] = {
+	{ .compatible = "allwinner,sun4i-a10-tcon", .data = &sun4i_a10_quirks },
+	{ .compatible = "allwinner,sun5i-a13-tcon", .data = &sun5i_a13_quirks },
+	{ .compatible = "allwinner,sun6i-a31-tcon", .data = &sun6i_a31_quirks },
+	{ .compatible = "allwinner,sun6i-a31s-tcon", .data = &sun6i_a31s_quirks },
+	{ .compatible = "allwinner,sun7i-a20-tcon", .data = &sun7i_a20_quirks },
+	{ .compatible = "allwinner,sun8i-a33-tcon", .data = &sun8i_a33_quirks },
+	{ .compatible = "allwinner,sun8i-a83t-tcon-lcd", .data = &sun8i_a83t_lcd_quirks },
+	{ .compatible = "allwinner,sun8i-a83t-tcon-tv", .data = &sun8i_a83t_tv_quirks },
+	{ .compatible = "allwinner,sun8i-v3s-tcon", .data = &sun8i_v3s_quirks },
+	{ .compatible = "allwinner,sun9i-a80-tcon-lcd", .data = &sun9i_a80_tcon_lcd_quirks },
+	{ .compatible = "allwinner,sun9i-a80-tcon-tv", .data = &sun9i_a80_tcon_tv_quirks },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sun4i_tcon_of_table);
+EXPORT_SYMBOL(sun4i_tcon_of_table);
+
+static struct platform_driver sun4i_tcon_platform_driver = {
+	.probe		= sun4i_tcon_probe,
+	.remove		= sun4i_tcon_remove,
+	.driver		= {
+		.name		= "sun4i-tcon",
+		.of_match_table	= sun4i_tcon_of_table,
+	},
+};
+module_platform_driver(sun4i_tcon_platform_driver);
+
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
+MODULE_DESCRIPTION("Allwinner A10 Timing Controller Driver");
+MODULE_LICENSE("GPL");