Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 3378 insertions, 0 deletions

diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
new file mode 100644
index 000000000..f8499cb95
--- /dev/null
+++ b/drivers/hwmon/it87.c
@@ -0,0 +1,3378 @@
+/*
+ *  it87.c - Part of lm_sensors, Linux kernel modules for hardware
+ *           monitoring.
+ *
+ *  The IT8705F is an LPC-based Super I/O part that contains UARTs, a
+ *  parallel port, an IR port, a MIDI port, a floppy controller, etc., in
+ *  addition to an Environment Controller (Enhanced Hardware Monitor and
+ *  Fan Controller)
+ *
+ *  This driver supports only the Environment Controller in the IT8705F and
+ *  similar parts.  The other devices are supported by different drivers.
+ *
+ *  Supports: IT8603E  Super I/O chip w/LPC interface
+ *            IT8620E  Super I/O chip w/LPC interface
+ *            IT8622E  Super I/O chip w/LPC interface
+ *            IT8623E  Super I/O chip w/LPC interface
+ *            IT8628E  Super I/O chip w/LPC interface
+ *            IT8705F  Super I/O chip w/LPC interface
+ *            IT8712F  Super I/O chip w/LPC interface
+ *            IT8716F  Super I/O chip w/LPC interface
+ *            IT8718F  Super I/O chip w/LPC interface
+ *            IT8720F  Super I/O chip w/LPC interface
+ *            IT8721F  Super I/O chip w/LPC interface
+ *            IT8726F  Super I/O chip w/LPC interface
+ *            IT8728F  Super I/O chip w/LPC interface
+ *            IT8732F  Super I/O chip w/LPC interface
+ *            IT8758E  Super I/O chip w/LPC interface
+ *            IT8771E  Super I/O chip w/LPC interface
+ *            IT8772E  Super I/O chip w/LPC interface
+ *            IT8781F  Super I/O chip w/LPC interface
+ *            IT8782F  Super I/O chip w/LPC interface
+ *            IT8783E/F Super I/O chip w/LPC interface
+ *            IT8786E  Super I/O chip w/LPC interface
+ *            IT8790E  Super I/O chip w/LPC interface
+ *            IT8792E  Super I/O chip w/LPC interface
+ *            Sis950   A clone of the IT8705F
+ *
+ *  Copyright (C) 2001 Chris Gauthron
+ *  Copyright (C) 2005-2010 Jean Delvare <jdelvare@suse.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/string.h>
+#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+
+#define DRVNAME "it87"
+
+enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8732,
+	     it8771, it8772, it8781, it8782, it8783, it8786, it8790,
+	     it8792, it8603, it8620, it8622, it8628 };
+
+static unsigned short force_id;
+module_param(force_id, ushort, 0);
+MODULE_PARM_DESC(force_id, "Override the detected device ID");
+
+static struct platform_device *it87_pdev[2];
+
+#define	REG_2E	0x2e	/* The register to read/write */
+#define	REG_4E	0x4e	/* Secondary register to read/write */
+
+#define	DEV	0x07	/* Register: Logical device select */
+#define PME	0x04	/* The device with the fan registers in it */
+
+/* The device with the IT8718F/IT8720F VID value in it */
+#define GPIO	0x07
+
+#define	DEVID	0x20	/* Register: Device ID */
+#define	DEVREV	0x22	/* Register: Device Revision */
+
+static inline int superio_inb(int ioreg, int reg)
+{
+	outb(reg, ioreg);
+	return inb(ioreg + 1);
+}
+
+static inline void superio_outb(int ioreg, int reg, int val)
+{
+	outb(reg, ioreg);
+	outb(val, ioreg + 1);
+}
+
+static int superio_inw(int ioreg, int reg)
+{
+	int val;
+
+	outb(reg++, ioreg);
+	val = inb(ioreg + 1) << 8;
+	outb(reg, ioreg);
+	val |= inb(ioreg + 1);
+	return val;
+}
+
+static inline void superio_select(int ioreg, int ldn)
+{
+	outb(DEV, ioreg);
+	outb(ldn, ioreg + 1);
+}
+
+static inline int superio_enter(int ioreg)
+{
+	/*
+	 * Try to reserve ioreg and ioreg + 1 for exclusive access.
+	 */
+	if (!request_muxed_region(ioreg, 2, DRVNAME))
+		return -EBUSY;
+
+	outb(0x87, ioreg);
+	outb(0x01, ioreg);
+	outb(0x55, ioreg);
+	outb(ioreg == REG_4E ? 0xaa : 0x55, ioreg);
+	return 0;
+}
+
+static inline void superio_exit(int ioreg)
+{
+	outb(0x02, ioreg);
+	outb(0x02, ioreg + 1);
+	release_region(ioreg, 2);
+}
+
+/* Logical device 4 registers */
+#define IT8712F_DEVID 0x8712
+#define IT8705F_DEVID 0x8705
+#define IT8716F_DEVID 0x8716
+#define IT8718F_DEVID 0x8718
+#define IT8720F_DEVID 0x8720
+#define IT8721F_DEVID 0x8721
+#define IT8726F_DEVID 0x8726
+#define IT8728F_DEVID 0x8728
+#define IT8732F_DEVID 0x8732
+#define IT8792E_DEVID 0x8733
+#define IT8771E_DEVID 0x8771
+#define IT8772E_DEVID 0x8772
+#define IT8781F_DEVID 0x8781
+#define IT8782F_DEVID 0x8782
+#define IT8783E_DEVID 0x8783
+#define IT8786E_DEVID 0x8786
+#define IT8790E_DEVID 0x8790
+#define IT8603E_DEVID 0x8603
+#define IT8620E_DEVID 0x8620
+#define IT8622E_DEVID 0x8622
+#define IT8623E_DEVID 0x8623
+#define IT8628E_DEVID 0x8628
+#define IT87_ACT_REG  0x30
+#define IT87_BASE_REG 0x60
+
+/* Logical device 7 registers (IT8712F and later) */
+#define IT87_SIO_GPIO1_REG	0x25
+#define IT87_SIO_GPIO2_REG	0x26
+#define IT87_SIO_GPIO3_REG	0x27
+#define IT87_SIO_GPIO4_REG	0x28
+#define IT87_SIO_GPIO5_REG	0x29
+#define IT87_SIO_PINX1_REG	0x2a	/* Pin selection */
+#define IT87_SIO_PINX2_REG	0x2c	/* Pin selection */
+#define IT87_SIO_SPI_REG	0xef	/* SPI function pin select */
+#define IT87_SIO_VID_REG	0xfc	/* VID value */
+#define IT87_SIO_BEEP_PIN_REG	0xf6	/* Beep pin mapping */
+
+/* Update battery voltage after every reading if true */
+static bool update_vbat;
+
+/* Not all BIOSes properly configure the PWM registers */
+static bool fix_pwm_polarity;
+
+/* Many IT87 constants specified below */
+
+/* Length of ISA address segment */
+#define IT87_EXTENT 8
+
+/* Length of ISA address segment for Environmental Controller */
+#define IT87_EC_EXTENT 2
+
+/* Offset of EC registers from ISA base address */
+#define IT87_EC_OFFSET 5
+
+/* Where are the ISA address/data registers relative to the EC base address */
+#define IT87_ADDR_REG_OFFSET 0
+#define IT87_DATA_REG_OFFSET 1
+
+/*----- The IT87 registers -----*/
+
+#define IT87_REG_CONFIG        0x00
+
+#define IT87_REG_ALARM1        0x01
+#define IT87_REG_ALARM2        0x02
+#define IT87_REG_ALARM3        0x03
+
+/*
+ * The IT8718F and IT8720F have the VID value in a different register, in
+ * Super-I/O configuration space.
+ */
+#define IT87_REG_VID           0x0a
+/*
+ * The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b
+ * for fan divisors. Later IT8712F revisions must use 16-bit tachometer
+ * mode.
+ */
+#define IT87_REG_FAN_DIV       0x0b
+#define IT87_REG_FAN_16BIT     0x0c
+
+/*
+ * Monitors:
+ * - up to 13 voltage (0 to 7, battery, avcc, 10 to 12)
+ * - up to 6 temp (1 to 6)
+ * - up to 6 fan (1 to 6)
+ */
+
+static const u8 IT87_REG_FAN[]         = { 0x0d, 0x0e, 0x0f, 0x80, 0x82, 0x4c };
+static const u8 IT87_REG_FAN_MIN[]     = { 0x10, 0x11, 0x12, 0x84, 0x86, 0x4e };
+static const u8 IT87_REG_FANX[]        = { 0x18, 0x19, 0x1a, 0x81, 0x83, 0x4d };
+static const u8 IT87_REG_FANX_MIN[]    = { 0x1b, 0x1c, 0x1d, 0x85, 0x87, 0x4f };
+static const u8 IT87_REG_TEMP_OFFSET[] = { 0x56, 0x57, 0x59 };
+
+#define IT87_REG_FAN_MAIN_CTRL 0x13
+#define IT87_REG_FAN_CTL       0x14
+static const u8 IT87_REG_PWM[]         = { 0x15, 0x16, 0x17, 0x7f, 0xa7, 0xaf };
+static const u8 IT87_REG_PWM_DUTY[]    = { 0x63, 0x6b, 0x73, 0x7b, 0xa3, 0xab };
+
+static const u8 IT87_REG_VIN[]	= { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26,
+				    0x27, 0x28, 0x2f, 0x2c, 0x2d, 0x2e };
+
+#define IT87_REG_TEMP(nr)      (0x29 + (nr))
+
+#define IT87_REG_VIN_MAX(nr)   (0x30 + (nr) * 2)
+#define IT87_REG_VIN_MIN(nr)   (0x31 + (nr) * 2)
+#define IT87_REG_TEMP_HIGH(nr) (0x40 + (nr) * 2)
+#define IT87_REG_TEMP_LOW(nr)  (0x41 + (nr) * 2)
+
+#define IT87_REG_VIN_ENABLE    0x50
+#define IT87_REG_TEMP_ENABLE   0x51
+#define IT87_REG_TEMP_EXTRA    0x55
+#define IT87_REG_BEEP_ENABLE   0x5c
+
+#define IT87_REG_CHIPID        0x58
+
+static const u8 IT87_REG_AUTO_BASE[] = { 0x60, 0x68, 0x70, 0x78, 0xa0, 0xa8 };
+
+#define IT87_REG_AUTO_TEMP(nr, i) (IT87_REG_AUTO_BASE[nr] + (i))
+#define IT87_REG_AUTO_PWM(nr, i)  (IT87_REG_AUTO_BASE[nr] + 5 + (i))
+
+#define IT87_REG_TEMP456_ENABLE	0x77
+
+#define NUM_VIN			ARRAY_SIZE(IT87_REG_VIN)
+#define NUM_VIN_LIMIT		8
+#define NUM_TEMP		6
+#define NUM_TEMP_OFFSET		ARRAY_SIZE(IT87_REG_TEMP_OFFSET)
+#define NUM_TEMP_LIMIT		3
+#define NUM_FAN			ARRAY_SIZE(IT87_REG_FAN)
+#define NUM_FAN_DIV		3
+#define NUM_PWM			ARRAY_SIZE(IT87_REG_PWM)
+#define NUM_AUTO_PWM		ARRAY_SIZE(IT87_REG_PWM)
+
+struct it87_devices {
+	const char *name;
+	const char * const suffix;
+	u32 features;
+	u8 peci_mask;
+	u8 old_peci_mask;
+};
+
+#define FEAT_12MV_ADC		BIT(0)
+#define FEAT_NEWER_AUTOPWM	BIT(1)
+#define FEAT_OLD_AUTOPWM	BIT(2)
+#define FEAT_16BIT_FANS		BIT(3)
+#define FEAT_TEMP_OFFSET	BIT(4)
+#define FEAT_TEMP_PECI		BIT(5)
+#define FEAT_TEMP_OLD_PECI	BIT(6)
+#define FEAT_FAN16_CONFIG	BIT(7)	/* Need to enable 16-bit fans */
+#define FEAT_FIVE_FANS		BIT(8)	/* Supports five fans */
+#define FEAT_VID		BIT(9)	/* Set if chip supports VID */
+#define FEAT_IN7_INTERNAL	BIT(10)	/* Set if in7 is internal */
+#define FEAT_SIX_FANS		BIT(11)	/* Supports six fans */
+#define FEAT_10_9MV_ADC		BIT(12)
+#define FEAT_AVCC3		BIT(13)	/* Chip supports in9/AVCC3 */
+#define FEAT_FIVE_PWM		BIT(14)	/* Chip supports 5 pwm chn */
+#define FEAT_SIX_PWM		BIT(15)	/* Chip supports 6 pwm chn */
+#define FEAT_PWM_FREQ2		BIT(16)	/* Separate pwm freq 2 */
+#define FEAT_SIX_TEMP		BIT(17)	/* Up to 6 temp sensors */
+#define FEAT_VIN3_5V		BIT(18)	/* VIN3 connected to +5V */
+
+static const struct it87_devices it87_devices[] = {
+	[it87] = {
+		.name = "it87",
+		.suffix = "F",
+		.features = FEAT_OLD_AUTOPWM,	/* may need to overwrite */
+	},
+	[it8712] = {
+		.name = "it8712",
+		.suffix = "F",
+		.features = FEAT_OLD_AUTOPWM | FEAT_VID,
+						/* may need to overwrite */
+	},
+	[it8716] = {
+		.name = "it8716",
+		.suffix = "F",
+		.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
+		  | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS | FEAT_PWM_FREQ2,
+	},
+	[it8718] = {
+		.name = "it8718",
+		.suffix = "F",
+		.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
+		  | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS
+		  | FEAT_PWM_FREQ2,
+		.old_peci_mask = 0x4,
+	},
+	[it8720] = {
+		.name = "it8720",
+		.suffix = "F",
+		.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
+		  | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS
+		  | FEAT_PWM_FREQ2,
+		.old_peci_mask = 0x4,
+	},
+	[it8721] = {
+		.name = "it8721",
+		.suffix = "F",
+		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+		  | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
+		  | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS | FEAT_IN7_INTERNAL
+		  | FEAT_PWM_FREQ2,
+		.peci_mask = 0x05,
+		.old_peci_mask = 0x02,	/* Actually reports PCH */
+	},
+	[it8728] = {
+		.name = "it8728",
+		.suffix = "F",
+		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_FIVE_FANS
+		  | FEAT_IN7_INTERNAL | FEAT_PWM_FREQ2,
+		.peci_mask = 0x07,
+	},
+	[it8732] = {
+		.name = "it8732",
+		.suffix = "F",
+		.features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS
+		  | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
+		  | FEAT_10_9MV_ADC | FEAT_IN7_INTERNAL,
+		.peci_mask = 0x07,
+		.old_peci_mask = 0x02,	/* Actually reports PCH */
+	},
+	[it8771] = {
+		.name = "it8771",
+		.suffix = "E",
+		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
+		  | FEAT_PWM_FREQ2,
+				/* PECI: guesswork */
+				/* 12mV ADC (OHM) */
+				/* 16 bit fans (OHM) */
+				/* three fans, always 16 bit (guesswork) */
+		.peci_mask = 0x07,
+	},
+	[it8772] = {
+		.name = "it8772",
+		.suffix = "E",
+		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
+		  | FEAT_PWM_FREQ2,
+				/* PECI (coreboot) */
+				/* 12mV ADC (HWSensors4, OHM) */
+				/* 16 bit fans (HWSensors4, OHM) */
+				/* three fans, always 16 bit (datasheet) */
+		.peci_mask = 0x07,
+	},
+	[it8781] = {
+		.name = "it8781",
+		.suffix = "F",
+		.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
+		  | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_PWM_FREQ2,
+		.old_peci_mask = 0x4,
+	},
+	[it8782] = {
+		.name = "it8782",
+		.suffix = "F",
+		.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
+		  | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_PWM_FREQ2,
+		.old_peci_mask = 0x4,
+	},
+	[it8783] = {
+		.name = "it8783",
+		.suffix = "E/F",
+		.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
+		  | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_PWM_FREQ2,
+		.old_peci_mask = 0x4,
+	},
+	[it8786] = {
+		.name = "it8786",
+		.suffix = "E",
+		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
+		  | FEAT_PWM_FREQ2,
+		.peci_mask = 0x07,
+	},
+	[it8790] = {
+		.name = "it8790",
+		.suffix = "E",
+		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
+		  | FEAT_PWM_FREQ2,
+		.peci_mask = 0x07,
+	},
+	[it8792] = {
+		.name = "it8792",
+		.suffix = "E",
+		.features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS
+		  | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
+		  | FEAT_10_9MV_ADC | FEAT_IN7_INTERNAL,
+		.peci_mask = 0x07,
+		.old_peci_mask = 0x02,	/* Actually reports PCH */
+	},
+	[it8603] = {
+		.name = "it8603",
+		.suffix = "E",
+		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL
+		  | FEAT_AVCC3 | FEAT_PWM_FREQ2,
+		.peci_mask = 0x07,
+	},
+	[it8620] = {
+		.name = "it8620",
+		.suffix = "E",
+		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_SIX_FANS
+		  | FEAT_IN7_INTERNAL | FEAT_SIX_PWM | FEAT_PWM_FREQ2
+		  | FEAT_SIX_TEMP | FEAT_VIN3_5V,
+		.peci_mask = 0x07,
+	},
+	[it8622] = {
+		.name = "it8622",
+		.suffix = "E",
+		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_FIVE_FANS
+		  | FEAT_FIVE_PWM | FEAT_IN7_INTERNAL | FEAT_PWM_FREQ2
+		  | FEAT_AVCC3 | FEAT_VIN3_5V,
+		.peci_mask = 0x07,
+	},
+	[it8628] = {
+		.name = "it8628",
+		.suffix = "E",
+		.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+		  | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_SIX_FANS
+		  | FEAT_IN7_INTERNAL | FEAT_SIX_PWM | FEAT_PWM_FREQ2
+		  | FEAT_SIX_TEMP | FEAT_VIN3_5V,
+		.peci_mask = 0x07,
+	},
+};
+
+#define has_16bit_fans(data)	((data)->features & FEAT_16BIT_FANS)
+#define has_12mv_adc(data)	((data)->features & FEAT_12MV_ADC)
+#define has_10_9mv_adc(data)	((data)->features & FEAT_10_9MV_ADC)
+#define has_newer_autopwm(data)	((data)->features & FEAT_NEWER_AUTOPWM)
+#define has_old_autopwm(data)	((data)->features & FEAT_OLD_AUTOPWM)
+#define has_temp_offset(data)	((data)->features & FEAT_TEMP_OFFSET)
+#define has_temp_peci(data, nr)	(((data)->features & FEAT_TEMP_PECI) && \
+				 ((data)->peci_mask & BIT(nr)))
+#define has_temp_old_peci(data, nr) \
+				(((data)->features & FEAT_TEMP_OLD_PECI) && \
+				 ((data)->old_peci_mask & BIT(nr)))
+#define has_fan16_config(data)	((data)->features & FEAT_FAN16_CONFIG)
+#define has_five_fans(data)	((data)->features & (FEAT_FIVE_FANS | \
+						     FEAT_SIX_FANS))
+#define has_vid(data)		((data)->features & FEAT_VID)
+#define has_in7_internal(data)	((data)->features & FEAT_IN7_INTERNAL)
+#define has_six_fans(data)	((data)->features & FEAT_SIX_FANS)
+#define has_avcc3(data)		((data)->features & FEAT_AVCC3)
+#define has_five_pwm(data)	((data)->features & (FEAT_FIVE_PWM \
+						     | FEAT_SIX_PWM))
+#define has_six_pwm(data)	((data)->features & FEAT_SIX_PWM)
+#define has_pwm_freq2(data)	((data)->features & FEAT_PWM_FREQ2)
+#define has_six_temp(data)	((data)->features & FEAT_SIX_TEMP)
+#define has_vin3_5v(data)	((data)->features & FEAT_VIN3_5V)
+
+struct it87_sio_data {
+	int sioaddr;
+	enum chips type;
+	/* Values read from Super-I/O config space */
+	u8 revision;
+	u8 vid_value;
+	u8 beep_pin;
+	u8 internal;	/* Internal sensors can be labeled */
+	bool need_in7_reroute;
+	/* Features skipped based on config or DMI */
+	u16 skip_in;
+	u8 skip_vid;
+	u8 skip_fan;
+	u8 skip_pwm;
+	u8 skip_temp;
+};
+
+/*
+ * For each registered chip, we need to keep some data in memory.
+ * The structure is dynamically allocated.
+ */
+struct it87_data {
+	const struct attribute_group *groups[7];
+	int sioaddr;
+	enum chips type;
+	u32 features;
+	u8 peci_mask;
+	u8 old_peci_mask;
+
+	unsigned short addr;
+	const char *name;
+	struct mutex update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	u16 in_scaled;		/* Internal voltage sensors are scaled */
+	u16 in_internal;	/* Bitfield, internal sensors (for labels) */
+	u16 has_in;		/* Bitfield, voltage sensors enabled */
+	u8 in[NUM_VIN][3];		/* [nr][0]=in, [1]=min, [2]=max */
+	bool need_in7_reroute;
+	u8 has_fan;		/* Bitfield, fans enabled */
+	u16 fan[NUM_FAN][2];	/* Register values, [nr][0]=fan, [1]=min */
+	u8 has_temp;		/* Bitfield, temp sensors enabled */
+	s8 temp[NUM_TEMP][4];	/* [nr][0]=temp, [1]=min, [2]=max, [3]=offset */
+	u8 sensor;		/* Register value (IT87_REG_TEMP_ENABLE) */
+	u8 extra;		/* Register value (IT87_REG_TEMP_EXTRA) */
+	u8 fan_div[NUM_FAN_DIV];/* Register encoding, shifted right */
+	bool has_vid;		/* True if VID supported */
+	u8 vid;			/* Register encoding, combined */
+	u8 vrm;
+	u32 alarms;		/* Register encoding, combined */
+	bool has_beep;		/* true if beep supported */
+	u8 beeps;		/* Register encoding */
+	u8 fan_main_ctrl;	/* Register value */
+	u8 fan_ctl;		/* Register value */
+
+	/*
+	 * The following 3 arrays correspond to the same registers up to
+	 * the IT8720F. The meaning of bits 6-0 depends on the value of bit
+	 * 7, and we want to preserve settings on mode changes, so we have
+	 * to track all values separately.
+	 * Starting with the IT8721F, the manual PWM duty cycles are stored
+	 * in separate registers (8-bit values), so the separate tracking
+	 * is no longer needed, but it is still done to keep the driver
+	 * simple.
+	 */
+	u8 has_pwm;		/* Bitfield, pwm control enabled */
+	u8 pwm_ctrl[NUM_PWM];	/* Register value */
+	u8 pwm_duty[NUM_PWM];	/* Manual PWM value set by user */
+	u8 pwm_temp_map[NUM_PWM];/* PWM to temp. chan. mapping (bits 1-0) */
+
+	/* Automatic fan speed control registers */
+	u8 auto_pwm[NUM_AUTO_PWM][4];	/* [nr][3] is hard-coded */
+	s8 auto_temp[NUM_AUTO_PWM][5];	/* [nr][0] is point1_temp_hyst */
+};
+
+static int adc_lsb(const struct it87_data *data, int nr)
+{
+	int lsb;
+
+	if (has_12mv_adc(data))
+		lsb = 120;
+	else if (has_10_9mv_adc(data))
+		lsb = 109;
+	else
+		lsb = 160;
+	if (data->in_scaled & BIT(nr))
+		lsb <<= 1;
+	return lsb;
+}
+
+static u8 in_to_reg(const struct it87_data *data, int nr, long val)
+{
+	val = DIV_ROUND_CLOSEST(val * 10, adc_lsb(data, nr));
+	return clamp_val(val, 0, 255);
+}
+
+static int in_from_reg(const struct it87_data *data, int nr, int val)
+{
+	return DIV_ROUND_CLOSEST(val * adc_lsb(data, nr), 10);
+}
+
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+	if (rpm == 0)
+		return 255;
+	rpm = clamp_val(rpm, 1, 1000000);
+	return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+}
+
+static inline u16 FAN16_TO_REG(long rpm)
+{
+	if (rpm == 0)
+		return 0xffff;
+	return clamp_val((1350000 + rpm) / (rpm * 2), 1, 0xfffe);
+}
+
+#define FAN_FROM_REG(val, div) ((val) == 0 ? -1 : (val) == 255 ? 0 : \
+				1350000 / ((val) * (div)))
+/* The divider is fixed to 2 in 16-bit mode */
+#define FAN16_FROM_REG(val) ((val) == 0 ? -1 : (val) == 0xffff ? 0 : \
+			     1350000 / ((val) * 2))
+
+#define TEMP_TO_REG(val) (clamp_val(((val) < 0 ? (((val) - 500) / 1000) : \
+				    ((val) + 500) / 1000), -128, 127))
+#define TEMP_FROM_REG(val) ((val) * 1000)
+
+static u8 pwm_to_reg(const struct it87_data *data, long val)
+{
+	if (has_newer_autopwm(data))
+		return val;
+	else
+		return val >> 1;
+}
+
+static int pwm_from_reg(const struct it87_data *data, u8 reg)
+{
+	if (has_newer_autopwm(data))
+		return reg;
+	else
+		return (reg & 0x7f) << 1;
+}
+
+static int DIV_TO_REG(int val)
+{
+	int answer = 0;
+
+	while (answer < 7 && (val >>= 1))
+		answer++;
+	return answer;
+}
+
+#define DIV_FROM_REG(val) BIT(val)
+
+/*
+ * PWM base frequencies. The frequency has to be divided by either 128 or 256,
+ * depending on the chip type, to calculate the actual PWM frequency.
+ *
+ * Some of the chip datasheets suggest a base frequency of 51 kHz instead
+ * of 750 kHz for the slowest base frequency, resulting in a PWM frequency
+ * of 200 Hz. Sometimes both PWM frequency select registers are affected,
+ * sometimes just one. It is unknown if this is a datasheet error or real,
+ * so this is ignored for now.
+ */
+static const unsigned int pwm_freq[8] = {
+	48000000,
+	24000000,
+	12000000,
+	8000000,
+	6000000,
+	3000000,
+	1500000,
+	750000,
+};
+
+/*
+ * Must be called with data->update_lock held, except during initialization.
+ * We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
+ * would slow down the IT87 access and should not be necessary.
+ */
+static int it87_read_value(struct it87_data *data, u8 reg)
+{
+	outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
+	return inb_p(data->addr + IT87_DATA_REG_OFFSET);
+}
+
+/*
+ * Must be called with data->update_lock held, except during initialization.
+ * We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
+ * would slow down the IT87 access and should not be necessary.
+ */
+static void it87_write_value(struct it87_data *data, u8 reg, u8 value)
+{
+	outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
+	outb_p(value, data->addr + IT87_DATA_REG_OFFSET);
+}
+
+static void it87_update_pwm_ctrl(struct it87_data *data, int nr)
+{
+	data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM[nr]);
+	if (has_newer_autopwm(data)) {
+		data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
+		data->pwm_duty[nr] = it87_read_value(data,
+						     IT87_REG_PWM_DUTY[nr]);
+	} else {
+		if (data->pwm_ctrl[nr] & 0x80)	/* Automatic mode */
+			data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
+		else				/* Manual mode */
+			data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
+	}
+
+	if (has_old_autopwm(data)) {
+		int i;
+
+		for (i = 0; i < 5 ; i++)
+			data->auto_temp[nr][i] = it87_read_value(data,
+						IT87_REG_AUTO_TEMP(nr, i));
+		for (i = 0; i < 3 ; i++)
+			data->auto_pwm[nr][i] = it87_read_value(data,
+						IT87_REG_AUTO_PWM(nr, i));
+	} else if (has_newer_autopwm(data)) {
+		int i;
+
+		/*
+		 * 0: temperature hysteresis (base + 5)
+		 * 1: fan off temperature (base + 0)
+		 * 2: fan start temperature (base + 1)
+		 * 3: fan max temperature (base + 2)
+		 */
+		data->auto_temp[nr][0] =
+			it87_read_value(data, IT87_REG_AUTO_TEMP(nr, 5));
+
+		for (i = 0; i < 3 ; i++)
+			data->auto_temp[nr][i + 1] =
+				it87_read_value(data,
+						IT87_REG_AUTO_TEMP(nr, i));
+		/*
+		 * 0: start pwm value (base + 3)
+		 * 1: pwm slope (base + 4, 1/8th pwm)
+		 */
+		data->auto_pwm[nr][0] =
+			it87_read_value(data, IT87_REG_AUTO_TEMP(nr, 3));
+		data->auto_pwm[nr][1] =
+			it87_read_value(data, IT87_REG_AUTO_TEMP(nr, 4));
+	}
+}
+
+static struct it87_data *it87_update_device(struct device *dev)
+{
+	struct it87_data *data = dev_get_drvdata(dev);
+	int i;
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2) ||
+	    !data->valid) {
+		if (update_vbat) {
+			/*
+			 * Cleared after each update, so reenable.  Value
+			 * returned by this read will be previous value
+			 */
+			it87_write_value(data, IT87_REG_CONFIG,
+				it87_read_value(data, IT87_REG_CONFIG) | 0x40);
+		}
+		for (i = 0; i < NUM_VIN; i++) {
+			if (!(data->has_in & BIT(i)))
+				continue;
+
+			data->in[i][0] =
+				it87_read_value(data, IT87_REG_VIN[i]);
+
+			/* VBAT and AVCC don't have limit registers */
+			if (i >= NUM_VIN_LIMIT)
+				continue;
+
+			data->in[i][1] =
+				it87_read_value(data, IT87_REG_VIN_MIN(i));
+			data->in[i][2] =
+				it87_read_value(data, IT87_REG_VIN_MAX(i));
+		}
+
+		for (i = 0; i < NUM_FAN; i++) {
+			/* Skip disabled fans */
+			if (!(data->has_fan & BIT(i)))
+				continue;
+
+			data->fan[i][1] =
+				it87_read_value(data, IT87_REG_FAN_MIN[i]);
+			data->fan[i][0] = it87_read_value(data,
+				       IT87_REG_FAN[i]);
+			/* Add high byte if in 16-bit mode */
+			if (has_16bit_fans(data)) {
+				data->fan[i][0] |= it87_read_value(data,
+						IT87_REG_FANX[i]) << 8;
+				data->fan[i][1] |= it87_read_value(data,
+						IT87_REG_FANX_MIN[i]) << 8;
+			}
+		}
+		for (i = 0; i < NUM_TEMP; i++) {
+			if (!(data->has_temp & BIT(i)))
+				continue;
+			data->temp[i][0] =
+				it87_read_value(data, IT87_REG_TEMP(i));
+
+			if (has_temp_offset(data) && i < NUM_TEMP_OFFSET)
+				data->temp[i][3] =
+				  it87_read_value(data,
+						  IT87_REG_TEMP_OFFSET[i]);
+
+			if (i >= NUM_TEMP_LIMIT)
+				continue;
+
+			data->temp[i][1] =
+				it87_read_value(data, IT87_REG_TEMP_LOW(i));
+			data->temp[i][2] =
+				it87_read_value(data, IT87_REG_TEMP_HIGH(i));
+		}
+
+		/* Newer chips don't have clock dividers */
+		if ((data->has_fan & 0x07) && !has_16bit_fans(data)) {
+			i = it87_read_value(data, IT87_REG_FAN_DIV);
+			data->fan_div[0] = i & 0x07;
+			data->fan_div[1] = (i >> 3) & 0x07;
+			data->fan_div[2] = (i & 0x40) ? 3 : 1;
+		}
+
+		data->alarms =
+			it87_read_value(data, IT87_REG_ALARM1) |
+			(it87_read_value(data, IT87_REG_ALARM2) << 8) |
+			(it87_read_value(data, IT87_REG_ALARM3) << 16);
+		data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
+
+		data->fan_main_ctrl = it87_read_value(data,
+				IT87_REG_FAN_MAIN_CTRL);
+		data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL);
+		for (i = 0; i < NUM_PWM; i++) {
+			if (!(data->has_pwm & BIT(i)))
+				continue;
+			it87_update_pwm_ctrl(data, i);
+		}
+
+		data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE);
+		data->extra = it87_read_value(data, IT87_REG_TEMP_EXTRA);
+		/*
+		 * The IT8705F does not have VID capability.
+		 * The IT8718F and later don't use IT87_REG_VID for the
+		 * same purpose.
+		 */
+		if (data->type == it8712 || data->type == it8716) {
+			data->vid = it87_read_value(data, IT87_REG_VID);
+			/*
+			 * The older IT8712F revisions had only 5 VID pins,
+			 * but we assume it is always safe to read 6 bits.
+			 */
+			data->vid &= 0x3f;
+		}
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
+static ssize_t show_in(struct device *dev, struct device_attribute *attr,
+		       char *buf)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct it87_data *data = it87_update_device(dev);
+	int index = sattr->index;
+	int nr = sattr->nr;
+
+	return sprintf(buf, "%d\n", in_from_reg(data, nr, data->in[nr][index]));
+}
+
+static ssize_t set_in(struct device *dev, struct device_attribute *attr,
+		      const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct it87_data *data = dev_get_drvdata(dev);
+	int index = sattr->index;
+	int nr = sattr->nr;
+	unsigned long val;
+
+	if (kstrtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->in[nr][index] = in_to_reg(data, nr, val);
+	it87_write_value(data,
+			 index == 1 ? IT87_REG_VIN_MIN(nr)
+				    : IT87_REG_VIN_MAX(nr),
+			 data->in[nr][index]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0);
+static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO | S_IWUSR, show_in, set_in,
+			    0, 1);
+static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_in, set_in,
+			    0, 2);
+
+static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 1, 0);
+static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_in, set_in,
+			    1, 1);
+static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_in, set_in,
+			    1, 2);
+
+static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 2, 0);
+static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_in, set_in,
+			    2, 1);
+static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_in, set_in,
+			    2, 2);
+
+static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 3, 0);
+static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO | S_IWUSR, show_in, set_in,
+			    3, 1);
+static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO | S_IWUSR, show_in, set_in,
+			    3, 2);
+
+static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 4, 0);
+static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO | S_IWUSR, show_in, set_in,
+			    4, 1);
+static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO | S_IWUSR, show_in, set_in,
+			    4, 2);
+
+static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 5, 0);
+static SENSOR_DEVICE_ATTR_2(in5_min, S_IRUGO | S_IWUSR, show_in, set_in,
+			    5, 1);
+static SENSOR_DEVICE_ATTR_2(in5_max, S_IRUGO | S_IWUSR, show_in, set_in,
+			    5, 2);
+
+static SENSOR_DEVICE_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 6, 0);
+static SENSOR_DEVICE_ATTR_2(in6_min, S_IRUGO | S_IWUSR, show_in, set_in,
+			    6, 1);
+static SENSOR_DEVICE_ATTR_2(in6_max, S_IRUGO | S_IWUSR, show_in, set_in,
+			    6, 2);
+
+static SENSOR_DEVICE_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 7, 0);
+static SENSOR_DEVICE_ATTR_2(in7_min, S_IRUGO | S_IWUSR, show_in, set_in,
+			    7, 1);
+static SENSOR_DEVICE_ATTR_2(in7_max, S_IRUGO | S_IWUSR, show_in, set_in,
+			    7, 2);
+
+static SENSOR_DEVICE_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 8, 0);
+static SENSOR_DEVICE_ATTR_2(in9_input, S_IRUGO, show_in, NULL, 9, 0);
+static SENSOR_DEVICE_ATTR_2(in10_input, S_IRUGO, show_in, NULL, 10, 0);
+static SENSOR_DEVICE_ATTR_2(in11_input, S_IRUGO, show_in, NULL, 11, 0);
+static SENSOR_DEVICE_ATTR_2(in12_input, S_IRUGO, show_in, NULL, 12, 0);
+
+/* Up to 6 temperatures */
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	int nr = sattr->nr;
+	int index = sattr->index;
+	struct it87_data *data = it87_update_device(dev);
+
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr][index]));
+}
+
+static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	int nr = sattr->nr;
+	int index = sattr->index;
+	struct it87_data *data = dev_get_drvdata(dev);
+	long val;
+	u8 reg, regval;
+
+	if (kstrtol(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+
+	switch (index) {
+	default:
+	case 1:
+		reg = IT87_REG_TEMP_LOW(nr);
+		break;
+	case 2:
+		reg = IT87_REG_TEMP_HIGH(nr);
+		break;
+	case 3:
+		regval = it87_read_value(data, IT87_REG_BEEP_ENABLE);
+		if (!(regval & 0x80)) {
+			regval |= 0x80;
+			it87_write_value(data, IT87_REG_BEEP_ENABLE, regval);
+		}
+		data->valid = 0;
+		reg = IT87_REG_TEMP_OFFSET[nr];
+		break;
+	}
+
+	data->temp[nr][index] = TEMP_TO_REG(val);
+	it87_write_value(data, reg, data->temp[nr][index]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    0, 1);
+static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    0, 2);
+static SENSOR_DEVICE_ATTR_2(temp1_offset, S_IRUGO | S_IWUSR, show_temp,
+			    set_temp, 0, 3);
+static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 1, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    1, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    1, 2);
+static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IRUGO | S_IWUSR, show_temp,
+			    set_temp, 1, 3);
+static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 2, 0);
+static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    2, 1);
+static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    2, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_offset, S_IRUGO | S_IWUSR, show_temp,
+			    set_temp, 2, 3);
+static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 3, 0);
+static SENSOR_DEVICE_ATTR_2(temp5_input, S_IRUGO, show_temp, NULL, 4, 0);
+static SENSOR_DEVICE_ATTR_2(temp6_input, S_IRUGO, show_temp, NULL, 5, 0);
+
+static ssize_t show_temp_type(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct it87_data *data = it87_update_device(dev);
+	u8 reg = data->sensor;	    /* In case value is updated while used */
+	u8 extra = data->extra;
+
+	if ((has_temp_peci(data, nr) && (reg >> 6 == nr + 1)) ||
+	    (has_temp_old_peci(data, nr) && (extra & 0x80)))
+		return sprintf(buf, "6\n");  /* Intel PECI */
+	if (reg & (1 << nr))
+		return sprintf(buf, "3\n");  /* thermal diode */
+	if (reg & (8 << nr))
+		return sprintf(buf, "4\n");  /* thermistor */
+	return sprintf(buf, "0\n");      /* disabled */
+}
+
+static ssize_t set_temp_type(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	struct it87_data *data = dev_get_drvdata(dev);
+	long val;
+	u8 reg, extra;
+
+	if (kstrtol(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	reg = it87_read_value(data, IT87_REG_TEMP_ENABLE);
+	reg &= ~(1 << nr);
+	reg &= ~(8 << nr);
+	if (has_temp_peci(data, nr) && (reg >> 6 == nr + 1 || val == 6))
+		reg &= 0x3f;
+	extra = it87_read_value(data, IT87_REG_TEMP_EXTRA);
+	if (has_temp_old_peci(data, nr) && ((extra & 0x80) || val == 6))
+		extra &= 0x7f;
+	if (val == 2) {	/* backwards compatibility */
+		dev_warn(dev,
+			 "Sensor type 2 is deprecated, please use 4 instead\n");
+		val = 4;
+	}
+	/* 3 = thermal diode; 4 = thermistor; 6 = Intel PECI; 0 = disabled */
+	if (val == 3)
+		reg |= 1 << nr;
+	else if (val == 4)
+		reg |= 8 << nr;
+	else if (has_temp_peci(data, nr) && val == 6)
+		reg |= (nr + 1) << 6;
+	else if (has_temp_old_peci(data, nr) && val == 6)
+		extra |= 0x80;
+	else if (val != 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->sensor = reg;
+	data->extra = extra;
+	it87_write_value(data, IT87_REG_TEMP_ENABLE, data->sensor);
+	if (has_temp_old_peci(data, nr))
+		it87_write_value(data, IT87_REG_TEMP_EXTRA, data->extra);
+	data->valid = 0;	/* Force cache refresh */
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO | S_IWUSR, show_temp_type,
+			  set_temp_type, 0);
+static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR, show_temp_type,
+			  set_temp_type, 1);
+static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR, show_temp_type,
+			  set_temp_type, 2);
+
+/* 6 Fans */
+
+static int pwm_mode(const struct it87_data *data, int nr)
+{
+	if (data->type != it8603 && nr < 3 && !(data->fan_main_ctrl & BIT(nr)))
+		return 0;				/* Full speed */
+	if (data->pwm_ctrl[nr] & 0x80)
+		return 2;				/* Automatic mode */
+	if ((data->type == it8603 || nr >= 3) &&
+	    data->pwm_duty[nr] == pwm_to_reg(data, 0xff))
+		return 0;			/* Full speed */
+
+	return 1;				/* Manual mode */
+}
+
+static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	int nr = sattr->nr;
+	int index = sattr->index;
+	int speed;
+	struct it87_data *data = it87_update_device(dev);
+
+	speed = has_16bit_fans(data) ?
+		FAN16_FROM_REG(data->fan[nr][index]) :
+		FAN_FROM_REG(data->fan[nr][index],
+			     DIV_FROM_REG(data->fan_div[nr]));
+	return sprintf(buf, "%d\n", speed);
+}
+
+static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	struct it87_data *data = it87_update_device(dev);
+	int nr = sensor_attr->index;
+
+	return sprintf(buf, "%lu\n", DIV_FROM_REG(data->fan_div[nr]));
+}
+
+static ssize_t show_pwm_enable(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	struct it87_data *data = it87_update_device(dev);
+	int nr = sensor_attr->index;
+
+	return sprintf(buf, "%d\n", pwm_mode(data, nr));
+}
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	struct it87_data *data = it87_update_device(dev);
+	int nr = sensor_attr->index;
+
+	return sprintf(buf, "%d\n",
+		       pwm_from_reg(data, data->pwm_duty[nr]));
+}
+
+static ssize_t show_pwm_freq(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	struct it87_data *data = it87_update_device(dev);
+	int nr = sensor_attr->index;
+	unsigned int freq;
+	int index;
+
+	if (has_pwm_freq2(data) && nr == 1)
+		index = (data->extra >> 4) & 0x07;
+	else
+		index = (data->fan_ctl >> 4) & 0x07;
+
+	freq = pwm_freq[index] / (has_newer_autopwm(data) ? 256 : 128);
+
+	return sprintf(buf, "%u\n", freq);
+}
+
+static ssize_t set_fan(struct device *dev, struct device_attribute *attr,
+		       const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	int nr = sattr->nr;
+	int index = sattr->index;
+
+	struct it87_data *data = dev_get_drvdata(dev);
+	long val;
+	u8 reg;
+
+	if (kstrtol(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+
+	if (has_16bit_fans(data)) {
+		data->fan[nr][index] = FAN16_TO_REG(val);
+		it87_write_value(data, IT87_REG_FAN_MIN[nr],
+				 data->fan[nr][index] & 0xff);
+		it87_write_value(data, IT87_REG_FANX_MIN[nr],
+				 data->fan[nr][index] >> 8);
+	} else {
+		reg = it87_read_value(data, IT87_REG_FAN_DIV);
+		switch (nr) {
+		case 0:
+			data->fan_div[nr] = reg & 0x07;
+			break;
+		case 1:
+			data->fan_div[nr] = (reg >> 3) & 0x07;
+			break;
+		case 2:
+			data->fan_div[nr] = (reg & 0x40) ? 3 : 1;
+			break;
+		}
+		data->fan[nr][index] =
+		  FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+		it87_write_value(data, IT87_REG_FAN_MIN[nr],
+				 data->fan[nr][index]);
+	}
+
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	struct it87_data *data = dev_get_drvdata(dev);
+	int nr = sensor_attr->index;
+	unsigned long val;
+	int min;
+	u8 old;
+
+	if (kstrtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	old = it87_read_value(data, IT87_REG_FAN_DIV);
+
+	/* Save fan min limit */
+	min = FAN_FROM_REG(data->fan[nr][1], DIV_FROM_REG(data->fan_div[nr]));
+
+	switch (nr) {
+	case 0:
+	case 1:
+		data->fan_div[nr] = DIV_TO_REG(val);
+		break;
+	case 2:
+		if (val < 8)
+			data->fan_div[nr] = 1;
+		else
+			data->fan_div[nr] = 3;
+	}
+	val = old & 0x80;
+	val |= (data->fan_div[0] & 0x07);
+	val |= (data->fan_div[1] & 0x07) << 3;
+	if (data->fan_div[2] == 3)
+		val |= 0x1 << 6;
+	it87_write_value(data, IT87_REG_FAN_DIV, val);
+
+	/* Restore fan min limit */
+	data->fan[nr][1] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+	it87_write_value(data, IT87_REG_FAN_MIN[nr], data->fan[nr][1]);
+
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+/* Returns 0 if OK, -EINVAL otherwise */
+static int check_trip_points(struct device *dev, int nr)
+{
+	const struct it87_data *data = dev_get_drvdata(dev);
+	int i, err = 0;
+
+	if (has_old_autopwm(data)) {
+		for (i = 0; i < 3; i++) {
+			if (data->auto_temp[nr][i] > data->auto_temp[nr][i + 1])
+				err = -EINVAL;
+		}
+		for (i = 0; i < 2; i++) {
+			if (data->auto_pwm[nr][i] > data->auto_pwm[nr][i + 1])
+				err = -EINVAL;
+		}
+	} else if (has_newer_autopwm(data)) {
+		for (i = 1; i < 3; i++) {
+			if (data->auto_temp[nr][i] > data->auto_temp[nr][i + 1])
+				err = -EINVAL;
+		}
+	}
+
+	if (err) {
+		dev_err(dev,
+			"Inconsistent trip points, not switching to automatic mode\n");
+		dev_err(dev, "Adjust the trip points and try again\n");
+	}
+	return err;
+}
+
+static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	struct it87_data *data = dev_get_drvdata(dev);
+	int nr = sensor_attr->index;
+	long val;
+
+	if (kstrtol(buf, 10, &val) < 0 || val < 0 || val > 2)
+		return -EINVAL;
+
+	/* Check trip points before switching to automatic mode */
+	if (val == 2) {
+		if (check_trip_points(dev, nr) < 0)
+			return -EINVAL;
+	}
+
+	mutex_lock(&data->update_lock);
+
+	if (val == 0) {
+		if (nr < 3 && data->type != it8603) {
+			int tmp;
+			/* make sure the fan is on when in on/off mode */
+			tmp = it87_read_value(data, IT87_REG_FAN_CTL);
+			it87_write_value(data, IT87_REG_FAN_CTL, tmp | BIT(nr));
+			/* set on/off mode */
+			data->fan_main_ctrl &= ~BIT(nr);
+			it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
+					 data->fan_main_ctrl);
+		} else {
+			u8 ctrl;
+
+			/* No on/off mode, set maximum pwm value */
+			data->pwm_duty[nr] = pwm_to_reg(data, 0xff);
+			it87_write_value(data, IT87_REG_PWM_DUTY[nr],
+					 data->pwm_duty[nr]);
+			/* and set manual mode */
+			if (has_newer_autopwm(data)) {
+				ctrl = (data->pwm_ctrl[nr] & 0x7c) |
+					data->pwm_temp_map[nr];
+			} else {
+				ctrl = data->pwm_duty[nr];
+			}
+			data->pwm_ctrl[nr] = ctrl;
+			it87_write_value(data, IT87_REG_PWM[nr], ctrl);
+		}
+	} else {
+		u8 ctrl;
+
+		if (has_newer_autopwm(data)) {
+			ctrl = (data->pwm_ctrl[nr] & 0x7c) |
+				data->pwm_temp_map[nr];
+			if (val != 1)
+				ctrl |= 0x80;
+		} else {
+			ctrl = (val == 1 ? data->pwm_duty[nr] : 0x80);
+		}
+		data->pwm_ctrl[nr] = ctrl;
+		it87_write_value(data, IT87_REG_PWM[nr], ctrl);
+
+		if (data->type != it8603 && nr < 3) {
+			/* set SmartGuardian mode */
+			data->fan_main_ctrl |= BIT(nr);
+			it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
+					 data->fan_main_ctrl);
+		}
+	}
+
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
+		       const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	struct it87_data *data = dev_get_drvdata(dev);
+	int nr = sensor_attr->index;
+	long val;
+
+	if (kstrtol(buf, 10, &val) < 0 || val < 0 || val > 255)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	it87_update_pwm_ctrl(data, nr);
+	if (has_newer_autopwm(data)) {
+		/*
+		 * If we are in automatic mode, the PWM duty cycle register
+		 * is read-only so we can't write the value.
+		 */
+		if (data->pwm_ctrl[nr] & 0x80) {
+			mutex_unlock(&data->update_lock);
+			return -EBUSY;
+		}
+		data->pwm_duty[nr] = pwm_to_reg(data, val);
+		it87_write_value(data, IT87_REG_PWM_DUTY[nr],
+				 data->pwm_duty[nr]);
+	} else {
+		data->pwm_duty[nr] = pwm_to_reg(data, val);
+		/*
+		 * If we are in manual mode, write the duty cycle immediately;
+		 * otherwise, just store it for later use.
+		 */
+		if (!(data->pwm_ctrl[nr] & 0x80)) {
+			data->pwm_ctrl[nr] = data->pwm_duty[nr];
+			it87_write_value(data, IT87_REG_PWM[nr],
+					 data->pwm_ctrl[nr]);
+		}
+	}
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t set_pwm_freq(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	struct it87_data *data = dev_get_drvdata(dev);
+	int nr = sensor_attr->index;
+	unsigned long val;
+	int i;
+
+	if (kstrtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	val = clamp_val(val, 0, 1000000);
+	val *= has_newer_autopwm(data) ? 256 : 128;
+
+	/* Search for the nearest available frequency */
+	for (i = 0; i < 7; i++) {
+		if (val > (pwm_freq[i] + pwm_freq[i + 1]) / 2)
+			break;
+	}
+
+	mutex_lock(&data->update_lock);
+	if (nr == 0) {
+		data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL) & 0x8f;
+		data->fan_ctl |= i << 4;
+		it87_write_value(data, IT87_REG_FAN_CTL, data->fan_ctl);
+	} else {
+		data->extra = it87_read_value(data, IT87_REG_TEMP_EXTRA) & 0x8f;
+		data->extra |= i << 4;
+		it87_write_value(data, IT87_REG_TEMP_EXTRA, data->extra);
+	}
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t show_pwm_temp_map(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	struct it87_data *data = it87_update_device(dev);
+	int nr = sensor_attr->index;
+	int map;
+
+	map = data->pwm_temp_map[nr];
+	if (map >= 3)
+		map = 0;	/* Should never happen */
+	if (nr >= 3)		/* pwm channels 3..6 map to temp4..6 */
+		map += 3;
+
+	return sprintf(buf, "%d\n", (int)BIT(map));
+}
+
+static ssize_t set_pwm_temp_map(struct device *dev,
+				struct device_attribute *attr, const char *buf,
+				size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	struct it87_data *data = dev_get_drvdata(dev);
+	int nr = sensor_attr->index;
+	long val;
+	u8 reg;
+
+	if (kstrtol(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	if (nr >= 3)
+		val -= 3;
+
+	switch (val) {
+	case BIT(0):
+		reg = 0x00;
+		break;
+	case BIT(1):
+		reg = 0x01;
+		break;
+	case BIT(2):
+		reg = 0x02;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mutex_lock(&data->update_lock);
+	it87_update_pwm_ctrl(data, nr);
+	data->pwm_temp_map[nr] = reg;
+	/*
+	 * If we are in automatic mode, write the temp mapping immediately;
+	 * otherwise, just store it for later use.
+	 */
+	if (data->pwm_ctrl[nr] & 0x80) {
+		data->pwm_ctrl[nr] = (data->pwm_ctrl[nr] & 0xfc) |
+						data->pwm_temp_map[nr];
+		it87_write_value(data, IT87_REG_PWM[nr], data->pwm_ctrl[nr]);
+	}
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_auto_pwm(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct it87_data *data = it87_update_device(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+			to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int point = sensor_attr->index;
+
+	return sprintf(buf, "%d\n",
+		       pwm_from_reg(data, data->auto_pwm[nr][point]));
+}
+
+static ssize_t set_auto_pwm(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct it87_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+			to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int point = sensor_attr->index;
+	int regaddr;
+	long val;
+
+	if (kstrtol(buf, 10, &val) < 0 || val < 0 || val > 255)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->auto_pwm[nr][point] = pwm_to_reg(data, val);
+	if (has_newer_autopwm(data))
+		regaddr = IT87_REG_AUTO_TEMP(nr, 3);
+	else
+		regaddr = IT87_REG_AUTO_PWM(nr, point);
+	it87_write_value(data, regaddr, data->auto_pwm[nr][point]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_auto_pwm_slope(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct it87_data *data = it87_update_device(dev);
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+
+	return sprintf(buf, "%d\n", data->auto_pwm[nr][1] & 0x7f);
+}
+
+static ssize_t set_auto_pwm_slope(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct it87_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	unsigned long val;
+
+	if (kstrtoul(buf, 10, &val) < 0 || val > 127)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->auto_pwm[nr][1] = (data->auto_pwm[nr][1] & 0x80) | val;
+	it87_write_value(data, IT87_REG_AUTO_TEMP(nr, 4),
+			 data->auto_pwm[nr][1]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_auto_temp(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct it87_data *data = it87_update_device(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+			to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int point = sensor_attr->index;
+	int reg;
+
+	if (has_old_autopwm(data) || point)
+		reg = data->auto_temp[nr][point];
+	else
+		reg = data->auto_temp[nr][1] - (data->auto_temp[nr][0] & 0x1f);
+
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(reg));
+}
+
+static ssize_t set_auto_temp(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct it87_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+			to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int point = sensor_attr->index;
+	long val;
+	int reg;
+
+	if (kstrtol(buf, 10, &val) < 0 || val < -128000 || val > 127000)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	if (has_newer_autopwm(data) && !point) {
+		reg = data->auto_temp[nr][1] - TEMP_TO_REG(val);
+		reg = clamp_val(reg, 0, 0x1f) | (data->auto_temp[nr][0] & 0xe0);
+		data->auto_temp[nr][0] = reg;
+		it87_write_value(data, IT87_REG_AUTO_TEMP(nr, 5), reg);
+	} else {
+		reg = TEMP_TO_REG(val);
+		data->auto_temp[nr][point] = reg;
+		if (has_newer_autopwm(data))
+			point--;
+		it87_write_value(data, IT87_REG_AUTO_TEMP(nr, point), reg);
+	}
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, 0);
+static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
+			    0, 1);
+static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, show_fan_div,
+			  set_fan_div, 0);
+
+static SENSOR_DEVICE_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 1, 0);
+static SENSOR_DEVICE_ATTR_2(fan2_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
+			    1, 1);
+static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR, show_fan_div,
+			  set_fan_div, 1);
+
+static SENSOR_DEVICE_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 2, 0);
+static SENSOR_DEVICE_ATTR_2(fan3_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
+			    2, 1);
+static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO | S_IWUSR, show_fan_div,
+			  set_fan_div, 2);
+
+static SENSOR_DEVICE_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 3, 0);
+static SENSOR_DEVICE_ATTR_2(fan4_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
+			    3, 1);
+
+static SENSOR_DEVICE_ATTR_2(fan5_input, S_IRUGO, show_fan, NULL, 4, 0);
+static SENSOR_DEVICE_ATTR_2(fan5_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
+			    4, 1);
+
+static SENSOR_DEVICE_ATTR_2(fan6_input, S_IRUGO, show_fan, NULL, 5, 0);
+static SENSOR_DEVICE_ATTR_2(fan6_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
+			    5, 1);
+
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
+			  show_pwm_enable, set_pwm_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 0);
+static SENSOR_DEVICE_ATTR(pwm1_freq, S_IRUGO | S_IWUSR, show_pwm_freq,
+			  set_pwm_freq, 0);
+static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IRUGO,
+			  show_pwm_temp_map, set_pwm_temp_map, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR,
+			    show_auto_pwm, set_auto_pwm, 0, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO | S_IWUSR,
+			    show_auto_pwm, set_auto_pwm, 0, 1);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_pwm, S_IRUGO | S_IWUSR,
+			    show_auto_pwm, set_auto_pwm, 0, 2);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point4_pwm, S_IRUGO,
+			    show_auto_pwm, NULL, 0, 3);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 0, 1);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 0, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 0, 2);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 0, 3);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point4_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 0, 4);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_start, S_IRUGO | S_IWUSR,
+			    show_auto_pwm, set_auto_pwm, 0, 0);
+static SENSOR_DEVICE_ATTR(pwm1_auto_slope, S_IRUGO | S_IWUSR,
+			  show_auto_pwm_slope, set_auto_pwm_slope, 0);
+
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR,
+			  show_pwm_enable, set_pwm_enable, 1);
+static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 1);
+static SENSOR_DEVICE_ATTR(pwm2_freq, S_IRUGO, show_pwm_freq, set_pwm_freq, 1);
+static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IRUGO,
+			  show_pwm_temp_map, set_pwm_temp_map, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR,
+			    show_auto_pwm, set_auto_pwm, 1, 0);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO | S_IWUSR,
+			    show_auto_pwm, set_auto_pwm, 1, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_pwm, S_IRUGO | S_IWUSR,
+			    show_auto_pwm, set_auto_pwm, 1, 2);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point4_pwm, S_IRUGO,
+			    show_auto_pwm, NULL, 1, 3);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 1, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 1, 0);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 1, 2);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 1, 3);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point4_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 1, 4);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_start, S_IRUGO | S_IWUSR,
+			    show_auto_pwm, set_auto_pwm, 1, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_slope, S_IRUGO | S_IWUSR,
+			  show_auto_pwm_slope, set_auto_pwm_slope, 1);
+
+static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR,
+			  show_pwm_enable, set_pwm_enable, 2);
+static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 2);
+static SENSOR_DEVICE_ATTR(pwm3_freq, S_IRUGO, show_pwm_freq, NULL, 2);
+static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IRUGO,
+			  show_pwm_temp_map, set_pwm_temp_map, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR,
+			    show_auto_pwm, set_auto_pwm, 2, 0);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR,
+			    show_auto_pwm, set_auto_pwm, 2, 1);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_pwm, S_IRUGO | S_IWUSR,
+			    show_auto_pwm, set_auto_pwm, 2, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point4_pwm, S_IRUGO,
+			    show_auto_pwm, NULL, 2, 3);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 2, 1);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 2, 0);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 2, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 2, 3);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point4_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 2, 4);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_start, S_IRUGO | S_IWUSR,
+			    show_auto_pwm, set_auto_pwm, 2, 0);
+static SENSOR_DEVICE_ATTR(pwm3_auto_slope, S_IRUGO | S_IWUSR,
+			  show_auto_pwm_slope, set_auto_pwm_slope, 2);
+
+static SENSOR_DEVICE_ATTR(pwm4_enable, S_IRUGO | S_IWUSR,
+			  show_pwm_enable, set_pwm_enable, 3);
+static SENSOR_DEVICE_ATTR(pwm4, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 3);
+static SENSOR_DEVICE_ATTR(pwm4_freq, S_IRUGO, show_pwm_freq, NULL, 3);
+static SENSOR_DEVICE_ATTR(pwm4_auto_channels_temp, S_IRUGO,
+			  show_pwm_temp_map, set_pwm_temp_map, 3);
+static SENSOR_DEVICE_ATTR_2(pwm4_auto_point1_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 2, 1);
+static SENSOR_DEVICE_ATTR_2(pwm4_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 2, 0);
+static SENSOR_DEVICE_ATTR_2(pwm4_auto_point2_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 2, 2);
+static SENSOR_DEVICE_ATTR_2(pwm4_auto_point3_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 2, 3);
+static SENSOR_DEVICE_ATTR_2(pwm4_auto_start, S_IRUGO | S_IWUSR,
+			    show_auto_pwm, set_auto_pwm, 3, 0);
+static SENSOR_DEVICE_ATTR(pwm4_auto_slope, S_IRUGO | S_IWUSR,
+			  show_auto_pwm_slope, set_auto_pwm_slope, 3);
+
+static SENSOR_DEVICE_ATTR(pwm5_enable, S_IRUGO | S_IWUSR,
+			  show_pwm_enable, set_pwm_enable, 4);
+static SENSOR_DEVICE_ATTR(pwm5, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 4);
+static SENSOR_DEVICE_ATTR(pwm5_freq, S_IRUGO, show_pwm_freq, NULL, 4);
+static SENSOR_DEVICE_ATTR(pwm5_auto_channels_temp, S_IRUGO,
+			  show_pwm_temp_map, set_pwm_temp_map, 4);
+static SENSOR_DEVICE_ATTR_2(pwm5_auto_point1_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 2, 1);
+static SENSOR_DEVICE_ATTR_2(pwm5_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 2, 0);
+static SENSOR_DEVICE_ATTR_2(pwm5_auto_point2_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 2, 2);
+static SENSOR_DEVICE_ATTR_2(pwm5_auto_point3_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 2, 3);
+static SENSOR_DEVICE_ATTR_2(pwm5_auto_start, S_IRUGO | S_IWUSR,
+			    show_auto_pwm, set_auto_pwm, 4, 0);
+static SENSOR_DEVICE_ATTR(pwm5_auto_slope, S_IRUGO | S_IWUSR,
+			  show_auto_pwm_slope, set_auto_pwm_slope, 4);
+
+static SENSOR_DEVICE_ATTR(pwm6_enable, S_IRUGO | S_IWUSR,
+			  show_pwm_enable, set_pwm_enable, 5);
+static SENSOR_DEVICE_ATTR(pwm6, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 5);
+static SENSOR_DEVICE_ATTR(pwm6_freq, S_IRUGO, show_pwm_freq, NULL, 5);
+static SENSOR_DEVICE_ATTR(pwm6_auto_channels_temp, S_IRUGO,
+			  show_pwm_temp_map, set_pwm_temp_map, 5);
+static SENSOR_DEVICE_ATTR_2(pwm6_auto_point1_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 2, 1);
+static SENSOR_DEVICE_ATTR_2(pwm6_auto_point1_temp_hyst, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 2, 0);
+static SENSOR_DEVICE_ATTR_2(pwm6_auto_point2_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 2, 2);
+static SENSOR_DEVICE_ATTR_2(pwm6_auto_point3_temp, S_IRUGO | S_IWUSR,
+			    show_auto_temp, set_auto_temp, 2, 3);
+static SENSOR_DEVICE_ATTR_2(pwm6_auto_start, S_IRUGO | S_IWUSR,
+			    show_auto_pwm, set_auto_pwm, 5, 0);
+static SENSOR_DEVICE_ATTR(pwm6_auto_slope, S_IRUGO | S_IWUSR,
+			  show_auto_pwm_slope, set_auto_pwm_slope, 5);
+
+/* Alarms */
+static ssize_t alarms_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct it87_data *data = it87_update_device(dev);
+
+	return sprintf(buf, "%u\n", data->alarms);
+}
+static DEVICE_ATTR_RO(alarms);
+
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct it87_data *data = it87_update_device(dev);
+	int bitnr = to_sensor_dev_attr(attr)->index;
+
+	return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
+}
+
+static ssize_t clear_intrusion(struct device *dev,
+			       struct device_attribute *attr, const char *buf,
+			       size_t count)
+{
+	struct it87_data *data = dev_get_drvdata(dev);
+	int config;
+	long val;
+
+	if (kstrtol(buf, 10, &val) < 0 || val != 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	config = it87_read_value(data, IT87_REG_CONFIG);
+	if (config < 0) {
+		count = config;
+	} else {
+		config |= BIT(5);
+		it87_write_value(data, IT87_REG_CONFIG, config);
+		/* Invalidate cache to force re-read */
+		data->valid = 0;
+	}
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 9);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 10);
+static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 11);
+static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 12);
+static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 13);
+static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 14);
+static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 15);
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, 7);
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 16);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 17);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 18);
+static SENSOR_DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR,
+			  show_alarm, clear_intrusion, 4);
+
+static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct it87_data *data = it87_update_device(dev);
+	int bitnr = to_sensor_dev_attr(attr)->index;
+
+	return sprintf(buf, "%u\n", (data->beeps >> bitnr) & 1);
+}
+
+static ssize_t set_beep(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	int bitnr = to_sensor_dev_attr(attr)->index;
+	struct it87_data *data = dev_get_drvdata(dev);
+	long val;
+
+	if (kstrtol(buf, 10, &val) < 0 || (val != 0 && val != 1))
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE);
+	if (val)
+		data->beeps |= BIT(bitnr);
+	else
+		data->beeps &= ~BIT(bitnr);
+	it87_write_value(data, IT87_REG_BEEP_ENABLE, data->beeps);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
+			  show_beep, set_beep, 1);
+static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO, show_beep, NULL, 1);
+static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO, show_beep, NULL, 1);
+/* fanX_beep writability is set later */
+static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(fan4_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(fan5_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(fan6_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
+			  show_beep, set_beep, 2);
+static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO, show_beep, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO, show_beep, NULL, 2);
+
+static ssize_t vrm_show(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct it87_data *data = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", data->vrm);
+}
+
+static ssize_t vrm_store(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count)
+{
+	struct it87_data *data = dev_get_drvdata(dev);
+	unsigned long val;
+
+	if (kstrtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	data->vrm = val;
+
+	return count;
+}
+static DEVICE_ATTR_RW(vrm);
+
+static ssize_t cpu0_vid_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct it87_data *data = it87_update_device(dev);
+
+	return sprintf(buf, "%ld\n", (long)vid_from_reg(data->vid, data->vrm));
+}
+static DEVICE_ATTR_RO(cpu0_vid);
+
+static ssize_t show_label(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	static const char * const labels[] = {
+		"+5V",
+		"5VSB",
+		"Vbat",
+		"AVCC",
+	};
+	static const char * const labels_it8721[] = {
+		"+3.3V",
+		"3VSB",
+		"Vbat",
+		"+3.3V",
+	};
+	struct it87_data *data = dev_get_drvdata(dev);
+	int nr = to_sensor_dev_attr(attr)->index;
+	const char *label;
+
+	if (has_vin3_5v(data) && nr == 0)
+		label = labels[0];
+	else if (has_12mv_adc(data) || has_10_9mv_adc(data))
+		label = labels_it8721[nr];
+	else
+		label = labels[nr];
+
+	return sprintf(buf, "%s\n", label);
+}
+static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_label, NULL, 0);
+static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_label, NULL, 1);
+static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_label, NULL, 2);
+/* AVCC3 */
+static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_label, NULL, 3);
+
+static umode_t it87_in_is_visible(struct kobject *kobj,
+				  struct attribute *attr, int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct it87_data *data = dev_get_drvdata(dev);
+	int i = index / 5;	/* voltage index */
+	int a = index % 5;	/* attribute index */
+
+	if (index >= 40) {	/* in8 and higher only have input attributes */
+		i = index - 40 + 8;
+		a = 0;
+	}
+
+	if (!(data->has_in & BIT(i)))
+		return 0;
+
+	if (a == 4 && !data->has_beep)
+		return 0;
+
+	return attr->mode;
+}
+
+static struct attribute *it87_attributes_in[] = {
+	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in0_min.dev_attr.attr,
+	&sensor_dev_attr_in0_max.dev_attr.attr,
+	&sensor_dev_attr_in0_alarm.dev_attr.attr,
+	&sensor_dev_attr_in0_beep.dev_attr.attr,	/* 4 */
+
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_min.dev_attr.attr,
+	&sensor_dev_attr_in1_max.dev_attr.attr,
+	&sensor_dev_attr_in1_alarm.dev_attr.attr,
+	&sensor_dev_attr_in1_beep.dev_attr.attr,	/* 9 */
+
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_min.dev_attr.attr,
+	&sensor_dev_attr_in2_max.dev_attr.attr,
+	&sensor_dev_attr_in2_alarm.dev_attr.attr,
+	&sensor_dev_attr_in2_beep.dev_attr.attr,	/* 14 */
+
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	&sensor_dev_attr_in3_min.dev_attr.attr,
+	&sensor_dev_attr_in3_max.dev_attr.attr,
+	&sensor_dev_attr_in3_alarm.dev_attr.attr,
+	&sensor_dev_attr_in3_beep.dev_attr.attr,	/* 19 */
+
+	&sensor_dev_attr_in4_input.dev_attr.attr,
+	&sensor_dev_attr_in4_min.dev_attr.attr,
+	&sensor_dev_attr_in4_max.dev_attr.attr,
+	&sensor_dev_attr_in4_alarm.dev_attr.attr,
+	&sensor_dev_attr_in4_beep.dev_attr.attr,	/* 24 */
+
+	&sensor_dev_attr_in5_input.dev_attr.attr,
+	&sensor_dev_attr_in5_min.dev_attr.attr,
+	&sensor_dev_attr_in5_max.dev_attr.attr,
+	&sensor_dev_attr_in5_alarm.dev_attr.attr,
+	&sensor_dev_attr_in5_beep.dev_attr.attr,	/* 29 */
+
+	&sensor_dev_attr_in6_input.dev_attr.attr,
+	&sensor_dev_attr_in6_min.dev_attr.attr,
+	&sensor_dev_attr_in6_max.dev_attr.attr,
+	&sensor_dev_attr_in6_alarm.dev_attr.attr,
+	&sensor_dev_attr_in6_beep.dev_attr.attr,	/* 34 */
+
+	&sensor_dev_attr_in7_input.dev_attr.attr,
+	&sensor_dev_attr_in7_min.dev_attr.attr,
+	&sensor_dev_attr_in7_max.dev_attr.attr,
+	&sensor_dev_attr_in7_alarm.dev_attr.attr,
+	&sensor_dev_attr_in7_beep.dev_attr.attr,	/* 39 */
+
+	&sensor_dev_attr_in8_input.dev_attr.attr,	/* 40 */
+	&sensor_dev_attr_in9_input.dev_attr.attr,
+	&sensor_dev_attr_in10_input.dev_attr.attr,
+	&sensor_dev_attr_in11_input.dev_attr.attr,
+	&sensor_dev_attr_in12_input.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group it87_group_in = {
+	.attrs = it87_attributes_in,
+	.is_visible = it87_in_is_visible,
+};
+
+static umode_t it87_temp_is_visible(struct kobject *kobj,
+				    struct attribute *attr, int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct it87_data *data = dev_get_drvdata(dev);
+	int i = index / 7;	/* temperature index */
+	int a = index % 7;	/* attribute index */
+
+	if (index >= 21) {
+		i = index - 21 + 3;
+		a = 0;
+	}
+
+	if (!(data->has_temp & BIT(i)))
+		return 0;
+
+	if (a == 5 && !has_temp_offset(data))
+		return 0;
+
+	if (a == 6 && !data->has_beep)
+		return 0;
+
+	return attr->mode;
+}
+
+static struct attribute *it87_attributes_temp[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_type.dev_attr.attr,
+	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_offset.dev_attr.attr,	/* 5 */
+	&sensor_dev_attr_temp1_beep.dev_attr.attr,	/* 6 */
+
+	&sensor_dev_attr_temp2_input.dev_attr.attr,	/* 7 */
+	&sensor_dev_attr_temp2_max.dev_attr.attr,
+	&sensor_dev_attr_temp2_min.dev_attr.attr,
+	&sensor_dev_attr_temp2_type.dev_attr.attr,
+	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_offset.dev_attr.attr,
+	&sensor_dev_attr_temp2_beep.dev_attr.attr,
+
+	&sensor_dev_attr_temp3_input.dev_attr.attr,	/* 14 */
+	&sensor_dev_attr_temp3_max.dev_attr.attr,
+	&sensor_dev_attr_temp3_min.dev_attr.attr,
+	&sensor_dev_attr_temp3_type.dev_attr.attr,
+	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_offset.dev_attr.attr,
+	&sensor_dev_attr_temp3_beep.dev_attr.attr,
+
+	&sensor_dev_attr_temp4_input.dev_attr.attr,	/* 21 */
+	&sensor_dev_attr_temp5_input.dev_attr.attr,
+	&sensor_dev_attr_temp6_input.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group it87_group_temp = {
+	.attrs = it87_attributes_temp,
+	.is_visible = it87_temp_is_visible,
+};
+
+static umode_t it87_is_visible(struct kobject *kobj,
+			       struct attribute *attr, int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct it87_data *data = dev_get_drvdata(dev);
+
+	if ((index == 2 || index == 3) && !data->has_vid)
+		return 0;
+
+	if (index > 3 && !(data->in_internal & BIT(index - 4)))
+		return 0;
+
+	return attr->mode;
+}
+
+static struct attribute *it87_attributes[] = {
+	&dev_attr_alarms.attr,
+	&sensor_dev_attr_intrusion0_alarm.dev_attr.attr,
+	&dev_attr_vrm.attr,				/* 2 */
+	&dev_attr_cpu0_vid.attr,			/* 3 */
+	&sensor_dev_attr_in3_label.dev_attr.attr,	/* 4 .. 7 */
+	&sensor_dev_attr_in7_label.dev_attr.attr,
+	&sensor_dev_attr_in8_label.dev_attr.attr,
+	&sensor_dev_attr_in9_label.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group it87_group = {
+	.attrs = it87_attributes,
+	.is_visible = it87_is_visible,
+};
+
+static umode_t it87_fan_is_visible(struct kobject *kobj,
+				   struct attribute *attr, int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct it87_data *data = dev_get_drvdata(dev);
+	int i = index / 5;	/* fan index */
+	int a = index % 5;	/* attribute index */
+
+	if (index >= 15) {	/* fan 4..6 don't have divisor attributes */
+		i = (index - 15) / 4 + 3;
+		a = (index - 15) % 4;
+	}
+
+	if (!(data->has_fan & BIT(i)))
+		return 0;
+
+	if (a == 3) {				/* beep */
+		if (!data->has_beep)
+			return 0;
+		/* first fan beep attribute is writable */
+		if (i == __ffs(data->has_fan))
+			return attr->mode | S_IWUSR;
+	}
+
+	if (a == 4 && has_16bit_fans(data))	/* divisor */
+		return 0;
+
+	return attr->mode;
+}
+
+static struct attribute *it87_attributes_fan[] = {
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_min.dev_attr.attr,
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan1_beep.dev_attr.attr,	/* 3 */
+	&sensor_dev_attr_fan1_div.dev_attr.attr,	/* 4 */
+
+	&sensor_dev_attr_fan2_input.dev_attr.attr,
+	&sensor_dev_attr_fan2_min.dev_attr.attr,
+	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan2_beep.dev_attr.attr,
+	&sensor_dev_attr_fan2_div.dev_attr.attr,	/* 9 */
+
+	&sensor_dev_attr_fan3_input.dev_attr.attr,
+	&sensor_dev_attr_fan3_min.dev_attr.attr,
+	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan3_beep.dev_attr.attr,
+	&sensor_dev_attr_fan3_div.dev_attr.attr,	/* 14 */
+
+	&sensor_dev_attr_fan4_input.dev_attr.attr,	/* 15 */
+	&sensor_dev_attr_fan4_min.dev_attr.attr,
+	&sensor_dev_attr_fan4_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan4_beep.dev_attr.attr,
+
+	&sensor_dev_attr_fan5_input.dev_attr.attr,	/* 19 */
+	&sensor_dev_attr_fan5_min.dev_attr.attr,
+	&sensor_dev_attr_fan5_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan5_beep.dev_attr.attr,
+
+	&sensor_dev_attr_fan6_input.dev_attr.attr,	/* 23 */
+	&sensor_dev_attr_fan6_min.dev_attr.attr,
+	&sensor_dev_attr_fan6_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan6_beep.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group it87_group_fan = {
+	.attrs = it87_attributes_fan,
+	.is_visible = it87_fan_is_visible,
+};
+
+static umode_t it87_pwm_is_visible(struct kobject *kobj,
+				   struct attribute *attr, int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct it87_data *data = dev_get_drvdata(dev);
+	int i = index / 4;	/* pwm index */
+	int a = index % 4;	/* attribute index */
+
+	if (!(data->has_pwm & BIT(i)))
+		return 0;
+
+	/* pwmX_auto_channels_temp is only writable if auto pwm is supported */
+	if (a == 3 && (has_old_autopwm(data) || has_newer_autopwm(data)))
+		return attr->mode | S_IWUSR;
+
+	/* pwm2_freq is writable if there are two pwm frequency selects */
+	if (has_pwm_freq2(data) && i == 1 && a == 2)
+		return attr->mode | S_IWUSR;
+
+	return attr->mode;
+}
+
+static struct attribute *it87_attributes_pwm[] = {
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm1.dev_attr.attr,
+	&sensor_dev_attr_pwm1_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
+
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2.dev_attr.attr,
+	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
+
+	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm3.dev_attr.attr,
+	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
+
+	&sensor_dev_attr_pwm4_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm4.dev_attr.attr,
+	&sensor_dev_attr_pwm4_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm4_auto_channels_temp.dev_attr.attr,
+
+	&sensor_dev_attr_pwm5_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm5.dev_attr.attr,
+	&sensor_dev_attr_pwm5_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm5_auto_channels_temp.dev_attr.attr,
+
+	&sensor_dev_attr_pwm6_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm6.dev_attr.attr,
+	&sensor_dev_attr_pwm6_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm6_auto_channels_temp.dev_attr.attr,
+
+	NULL
+};
+
+static const struct attribute_group it87_group_pwm = {
+	.attrs = it87_attributes_pwm,
+	.is_visible = it87_pwm_is_visible,
+};
+
+static umode_t it87_auto_pwm_is_visible(struct kobject *kobj,
+					struct attribute *attr, int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct it87_data *data = dev_get_drvdata(dev);
+	int i = index / 11;	/* pwm index */
+	int a = index % 11;	/* attribute index */
+
+	if (index >= 33) {	/* pwm 4..6 */
+		i = (index - 33) / 6 + 3;
+		a = (index - 33) % 6 + 4;
+	}
+
+	if (!(data->has_pwm & BIT(i)))
+		return 0;
+
+	if (has_newer_autopwm(data)) {
+		if (a < 4)	/* no auto point pwm */
+			return 0;
+		if (a == 8)	/* no auto_point4 */
+			return 0;
+	}
+	if (has_old_autopwm(data)) {
+		if (a >= 9)	/* no pwm_auto_start, pwm_auto_slope */
+			return 0;
+	}
+
+	return attr->mode;
+}
+
+static struct attribute *it87_attributes_auto_pwm[] = {
+	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point1_temp_hyst.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_start.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_slope.dev_attr.attr,
+
+	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,	/* 11 */
+	&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point3_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point4_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point1_temp_hyst.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point4_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_start.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_slope.dev_attr.attr,
+
+	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,	/* 22 */
+	&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point3_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point4_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point1_temp_hyst.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point4_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_start.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_slope.dev_attr.attr,
+
+	&sensor_dev_attr_pwm4_auto_point1_temp.dev_attr.attr,	/* 33 */
+	&sensor_dev_attr_pwm4_auto_point1_temp_hyst.dev_attr.attr,
+	&sensor_dev_attr_pwm4_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm4_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm4_auto_start.dev_attr.attr,
+	&sensor_dev_attr_pwm4_auto_slope.dev_attr.attr,
+
+	&sensor_dev_attr_pwm5_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm5_auto_point1_temp_hyst.dev_attr.attr,
+	&sensor_dev_attr_pwm5_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm5_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm5_auto_start.dev_attr.attr,
+	&sensor_dev_attr_pwm5_auto_slope.dev_attr.attr,
+
+	&sensor_dev_attr_pwm6_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm6_auto_point1_temp_hyst.dev_attr.attr,
+	&sensor_dev_attr_pwm6_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm6_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm6_auto_start.dev_attr.attr,
+	&sensor_dev_attr_pwm6_auto_slope.dev_attr.attr,
+
+	NULL,
+};
+
+static const struct attribute_group it87_group_auto_pwm = {
+	.attrs = it87_attributes_auto_pwm,
+	.is_visible = it87_auto_pwm_is_visible,
+};
+
+/* SuperIO detection - will change isa_address if a chip is found */
+static int __init it87_find(int sioaddr, unsigned short *address,
+			    struct it87_sio_data *sio_data)
+{
+	int err;
+	u16 chip_type;
+	const char *board_vendor, *board_name;
+	const struct it87_devices *config;
+
+	err = superio_enter(sioaddr);
+	if (err)
+		return err;
+
+	err = -ENODEV;
+	chip_type = force_id ? force_id : superio_inw(sioaddr, DEVID);
+
+	switch (chip_type) {
+	case IT8705F_DEVID:
+		sio_data->type = it87;
+		break;
+	case IT8712F_DEVID:
+		sio_data->type = it8712;
+		break;
+	case IT8716F_DEVID:
+	case IT8726F_DEVID:
+		sio_data->type = it8716;
+		break;
+	case IT8718F_DEVID:
+		sio_data->type = it8718;
+		break;
+	case IT8720F_DEVID:
+		sio_data->type = it8720;
+		break;
+	case IT8721F_DEVID:
+		sio_data->type = it8721;
+		break;
+	case IT8728F_DEVID:
+		sio_data->type = it8728;
+		break;
+	case IT8732F_DEVID:
+		sio_data->type = it8732;
+		break;
+	case IT8792E_DEVID:
+		sio_data->type = it8792;
+		break;
+	case IT8771E_DEVID:
+		sio_data->type = it8771;
+		break;
+	case IT8772E_DEVID:
+		sio_data->type = it8772;
+		break;
+	case IT8781F_DEVID:
+		sio_data->type = it8781;
+		break;
+	case IT8782F_DEVID:
+		sio_data->type = it8782;
+		break;
+	case IT8783E_DEVID:
+		sio_data->type = it8783;
+		break;
+	case IT8786E_DEVID:
+		sio_data->type = it8786;
+		break;
+	case IT8790E_DEVID:
+		sio_data->type = it8790;
+		break;
+	case IT8603E_DEVID:
+	case IT8623E_DEVID:
+		sio_data->type = it8603;
+		break;
+	case IT8620E_DEVID:
+		sio_data->type = it8620;
+		break;
+	case IT8622E_DEVID:
+		sio_data->type = it8622;
+		break;
+	case IT8628E_DEVID:
+		sio_data->type = it8628;
+		break;
+	case 0xffff:	/* No device at all */
+		goto exit;
+	default:
+		pr_debug("Unsupported chip (DEVID=0x%x)\n", chip_type);
+		goto exit;
+	}
+
+	superio_select(sioaddr, PME);
+	if (!(superio_inb(sioaddr, IT87_ACT_REG) & 0x01)) {
+		pr_info("Device not activated, skipping\n");
+		goto exit;
+	}
+
+	*address = superio_inw(sioaddr, IT87_BASE_REG) & ~(IT87_EXTENT - 1);
+	if (*address == 0) {
+		pr_info("Base address not set, skipping\n");
+		goto exit;
+	}
+
+	err = 0;
+	sio_data->sioaddr = sioaddr;
+	sio_data->revision = superio_inb(sioaddr, DEVREV) & 0x0f;
+	pr_info("Found IT%04x%s chip at 0x%x, revision %d\n", chip_type,
+		it87_devices[sio_data->type].suffix,
+		*address, sio_data->revision);
+
+	config = &it87_devices[sio_data->type];
+
+	/* in7 (VSB or VCCH5V) is always internal on some chips */
+	if (has_in7_internal(config))
+		sio_data->internal |= BIT(1);
+
+	/* in8 (Vbat) is always internal */
+	sio_data->internal |= BIT(2);
+
+	/* in9 (AVCC3), always internal if supported */
+	if (has_avcc3(config))
+		sio_data->internal |= BIT(3); /* in9 is AVCC */
+	else
+		sio_data->skip_in |= BIT(9);
+
+	if (!has_five_pwm(config))
+		sio_data->skip_pwm |= BIT(3) | BIT(4) | BIT(5);
+	else if (!has_six_pwm(config))
+		sio_data->skip_pwm |= BIT(5);
+
+	if (!has_vid(config))
+		sio_data->skip_vid = 1;
+
+	/* Read GPIO config and VID value from LDN 7 (GPIO) */
+	if (sio_data->type == it87) {
+		/* The IT8705F has a different LD number for GPIO */
+		superio_select(sioaddr, 5);
+		sio_data->beep_pin = superio_inb(sioaddr,
+						 IT87_SIO_BEEP_PIN_REG) & 0x3f;
+	} else if (sio_data->type == it8783) {
+		int reg25, reg27, reg2a, reg2c, regef;
+
+		superio_select(sioaddr, GPIO);
+
+		reg25 = superio_inb(sioaddr, IT87_SIO_GPIO1_REG);
+		reg27 = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
+		reg2a = superio_inb(sioaddr, IT87_SIO_PINX1_REG);
+		reg2c = superio_inb(sioaddr, IT87_SIO_PINX2_REG);
+		regef = superio_inb(sioaddr, IT87_SIO_SPI_REG);
+
+		/* Check if fan3 is there or not */
+		if ((reg27 & BIT(0)) || !(reg2c & BIT(2)))
+			sio_data->skip_fan |= BIT(2);
+		if ((reg25 & BIT(4)) ||
+		    (!(reg2a & BIT(1)) && (regef & BIT(0))))
+			sio_data->skip_pwm |= BIT(2);
+
+		/* Check if fan2 is there or not */
+		if (reg27 & BIT(7))
+			sio_data->skip_fan |= BIT(1);
+		if (reg27 & BIT(3))
+			sio_data->skip_pwm |= BIT(1);
+
+		/* VIN5 */
+		if ((reg27 & BIT(0)) || (reg2c & BIT(2)))
+			sio_data->skip_in |= BIT(5); /* No VIN5 */
+
+		/* VIN6 */
+		if (reg27 & BIT(1))
+			sio_data->skip_in |= BIT(6); /* No VIN6 */
+
+		/*
+		 * VIN7
+		 * Does not depend on bit 2 of Reg2C, contrary to datasheet.
+		 */
+		if (reg27 & BIT(2)) {
+			/*
+			 * The data sheet is a bit unclear regarding the
+			 * internal voltage divider for VCCH5V. It says
+			 * "This bit enables and switches VIN7 (pin 91) to the
+			 * internal voltage divider for VCCH5V".
+			 * This is different to other chips, where the internal
+			 * voltage divider would connect VIN7 to an internal
+			 * voltage source. Maybe that is the case here as well.
+			 *
+			 * Since we don't know for sure, re-route it if that is
+			 * not the case, and ask the user to report if the
+			 * resulting voltage is sane.
+			 */
+			if (!(reg2c & BIT(1))) {
+				reg2c |= BIT(1);
+				superio_outb(sioaddr, IT87_SIO_PINX2_REG,
+					     reg2c);
+				sio_data->need_in7_reroute = true;
+				pr_notice("Routing internal VCCH5V to in7.\n");
+			}
+			pr_notice("in7 routed to internal voltage divider, with external pin disabled.\n");
+			pr_notice("Please report if it displays a reasonable voltage.\n");
+		}
+
+		if (reg2c & BIT(0))
+			sio_data->internal |= BIT(0);
+		if (reg2c & BIT(1))
+			sio_data->internal |= BIT(1);
+
+		sio_data->beep_pin = superio_inb(sioaddr,
+						 IT87_SIO_BEEP_PIN_REG) & 0x3f;
+	} else if (sio_data->type == it8603) {
+		int reg27, reg29;
+
+		superio_select(sioaddr, GPIO);
+
+		reg27 = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
+
+		/* Check if fan3 is there or not */
+		if (reg27 & BIT(6))
+			sio_data->skip_pwm |= BIT(2);
+		if (reg27 & BIT(7))
+			sio_data->skip_fan |= BIT(2);
+
+		/* Check if fan2 is there or not */
+		reg29 = superio_inb(sioaddr, IT87_SIO_GPIO5_REG);
+		if (reg29 & BIT(1))
+			sio_data->skip_pwm |= BIT(1);
+		if (reg29 & BIT(2))
+			sio_data->skip_fan |= BIT(1);
+
+		sio_data->skip_in |= BIT(5); /* No VIN5 */
+		sio_data->skip_in |= BIT(6); /* No VIN6 */
+
+		sio_data->beep_pin = superio_inb(sioaddr,
+						 IT87_SIO_BEEP_PIN_REG) & 0x3f;
+	} else if (sio_data->type == it8620 || sio_data->type == it8628) {
+		int reg;
+
+		superio_select(sioaddr, GPIO);
+
+		/* Check for pwm5 */
+		reg = superio_inb(sioaddr, IT87_SIO_GPIO1_REG);
+		if (reg & BIT(6))
+			sio_data->skip_pwm |= BIT(4);
+
+		/* Check for fan4, fan5 */
+		reg = superio_inb(sioaddr, IT87_SIO_GPIO2_REG);
+		if (!(reg & BIT(5)))
+			sio_data->skip_fan |= BIT(3);
+		if (!(reg & BIT(4)))
+			sio_data->skip_fan |= BIT(4);
+
+		/* Check for pwm3, fan3 */
+		reg = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
+		if (reg & BIT(6))
+			sio_data->skip_pwm |= BIT(2);
+		if (reg & BIT(7))
+			sio_data->skip_fan |= BIT(2);
+
+		/* Check for pwm4 */
+		reg = superio_inb(sioaddr, IT87_SIO_GPIO4_REG);
+		if (reg & BIT(2))
+			sio_data->skip_pwm |= BIT(3);
+
+		/* Check for pwm2, fan2 */
+		reg = superio_inb(sioaddr, IT87_SIO_GPIO5_REG);
+		if (reg & BIT(1))
+			sio_data->skip_pwm |= BIT(1);
+		if (reg & BIT(2))
+			sio_data->skip_fan |= BIT(1);
+		/* Check for pwm6, fan6 */
+		if (!(reg & BIT(7))) {
+			sio_data->skip_pwm |= BIT(5);
+			sio_data->skip_fan |= BIT(5);
+		}
+
+		/* Check if AVCC is on VIN3 */
+		reg = superio_inb(sioaddr, IT87_SIO_PINX2_REG);
+		if (reg & BIT(0))
+			sio_data->internal |= BIT(0);
+		else
+			sio_data->skip_in |= BIT(9);
+
+		sio_data->beep_pin = superio_inb(sioaddr,
+						 IT87_SIO_BEEP_PIN_REG) & 0x3f;
+	} else if (sio_data->type == it8622) {
+		int reg;
+
+		superio_select(sioaddr, GPIO);
+
+		/* Check for pwm4, fan4 */
+		reg = superio_inb(sioaddr, IT87_SIO_GPIO1_REG);
+		if (reg & BIT(6))
+			sio_data->skip_fan |= BIT(3);
+		if (reg & BIT(5))
+			sio_data->skip_pwm |= BIT(3);
+
+		/* Check for pwm3, fan3, pwm5, fan5 */
+		reg = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
+		if (reg & BIT(6))
+			sio_data->skip_pwm |= BIT(2);
+		if (reg & BIT(7))
+			sio_data->skip_fan |= BIT(2);
+		if (reg & BIT(3))
+			sio_data->skip_pwm |= BIT(4);
+		if (reg & BIT(1))
+			sio_data->skip_fan |= BIT(4);
+
+		/* Check for pwm2, fan2 */
+		reg = superio_inb(sioaddr, IT87_SIO_GPIO5_REG);
+		if (reg & BIT(1))
+			sio_data->skip_pwm |= BIT(1);
+		if (reg & BIT(2))
+			sio_data->skip_fan |= BIT(1);
+
+		/* Check for AVCC */
+		reg = superio_inb(sioaddr, IT87_SIO_PINX2_REG);
+		if (!(reg & BIT(0)))
+			sio_data->skip_in |= BIT(9);
+
+		sio_data->beep_pin = superio_inb(sioaddr,
+						 IT87_SIO_BEEP_PIN_REG) & 0x3f;
+	} else {
+		int reg;
+		bool uart6;
+
+		superio_select(sioaddr, GPIO);
+
+		/* Check for fan4, fan5 */
+		if (has_five_fans(config)) {
+			reg = superio_inb(sioaddr, IT87_SIO_GPIO2_REG);
+			switch (sio_data->type) {
+			case it8718:
+				if (reg & BIT(5))
+					sio_data->skip_fan |= BIT(3);
+				if (reg & BIT(4))
+					sio_data->skip_fan |= BIT(4);
+				break;
+			case it8720:
+			case it8721:
+			case it8728:
+				if (!(reg & BIT(5)))
+					sio_data->skip_fan |= BIT(3);
+				if (!(reg & BIT(4)))
+					sio_data->skip_fan |= BIT(4);
+				break;
+			default:
+				break;
+			}
+		}
+
+		reg = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
+		if (!sio_data->skip_vid) {
+			/* We need at least 4 VID pins */
+			if (reg & 0x0f) {
+				pr_info("VID is disabled (pins used for GPIO)\n");
+				sio_data->skip_vid = 1;
+			}
+		}
+
+		/* Check if fan3 is there or not */
+		if (reg & BIT(6))
+			sio_data->skip_pwm |= BIT(2);
+		if (reg & BIT(7))
+			sio_data->skip_fan |= BIT(2);
+
+		/* Check if fan2 is there or not */
+		reg = superio_inb(sioaddr, IT87_SIO_GPIO5_REG);
+		if (reg & BIT(1))
+			sio_data->skip_pwm |= BIT(1);
+		if (reg & BIT(2))
+			sio_data->skip_fan |= BIT(1);
+
+		if ((sio_data->type == it8718 || sio_data->type == it8720) &&
+		    !(sio_data->skip_vid))
+			sio_data->vid_value = superio_inb(sioaddr,
+							  IT87_SIO_VID_REG);
+
+		reg = superio_inb(sioaddr, IT87_SIO_PINX2_REG);
+
+		uart6 = sio_data->type == it8782 && (reg & BIT(2));
+
+		/*
+		 * The IT8720F has no VIN7 pin, so VCCH5V should always be
+		 * routed internally to VIN7 with an internal divider.
+		 * Curiously, there still is a configuration bit to control
+		 * this, which means it can be set incorrectly. And even
+		 * more curiously, many boards out there are improperly
+		 * configured, even though the IT8720F datasheet claims
+		 * that the internal routing of VCCH5V to VIN7 is the default
+		 * setting. So we force the internal routing in this case.
+		 *
+		 * On IT8782F, VIN7 is multiplexed with one of the UART6 pins.
+		 * If UART6 is enabled, re-route VIN7 to the internal divider
+		 * if that is not already the case.
+		 */
+		if ((sio_data->type == it8720 || uart6) && !(reg & BIT(1))) {
+			reg |= BIT(1);
+			superio_outb(sioaddr, IT87_SIO_PINX2_REG, reg);
+			sio_data->need_in7_reroute = true;
+			pr_notice("Routing internal VCCH5V to in7\n");
+		}
+		if (reg & BIT(0))
+			sio_data->internal |= BIT(0);
+		if (reg & BIT(1))
+			sio_data->internal |= BIT(1);
+
+		/*
+		 * On IT8782F, UART6 pins overlap with VIN5, VIN6, and VIN7.
+		 * While VIN7 can be routed to the internal voltage divider,
+		 * VIN5 and VIN6 are not available if UART6 is enabled.
+		 *
+		 * Also, temp3 is not available if UART6 is enabled and TEMPIN3
+		 * is the temperature source. Since we can not read the
+		 * temperature source here, skip_temp is preliminary.
+		 */
+		if (uart6) {
+			sio_data->skip_in |= BIT(5) | BIT(6);
+			sio_data->skip_temp |= BIT(2);
+		}
+
+		sio_data->beep_pin = superio_inb(sioaddr,
+						 IT87_SIO_BEEP_PIN_REG) & 0x3f;
+	}
+	if (sio_data->beep_pin)
+		pr_info("Beeping is supported\n");
+
+	/* Disable specific features based on DMI strings */
+	board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+	board_name = dmi_get_system_info(DMI_BOARD_NAME);
+	if (board_vendor && board_name) {
+		if (strcmp(board_vendor, "nVIDIA") == 0 &&
+		    strcmp(board_name, "FN68PT") == 0) {
+			/*
+			 * On the Shuttle SN68PT, FAN_CTL2 is apparently not
+			 * connected to a fan, but to something else. One user
+			 * has reported instant system power-off when changing
+			 * the PWM2 duty cycle, so we disable it.
+			 * I use the board name string as the trigger in case
+			 * the same board is ever used in other systems.
+			 */
+			pr_info("Disabling pwm2 due to hardware constraints\n");
+			sio_data->skip_pwm = BIT(1);
+		}
+	}
+
+exit:
+	superio_exit(sioaddr);
+	return err;
+}
+
+/*
+ * Some chips seem to have default value 0xff for all limit
+ * registers. For low voltage limits it makes no sense and triggers
+ * alarms, so change to 0 instead. For high temperature limits, it
+ * means -1 degree C, which surprisingly doesn't trigger an alarm,
+ * but is still confusing, so change to 127 degrees C.
+ */
+static void it87_check_limit_regs(struct it87_data *data)
+{
+	int i, reg;
+
+	for (i = 0; i < NUM_VIN_LIMIT; i++) {
+		reg = it87_read_value(data, IT87_REG_VIN_MIN(i));
+		if (reg == 0xff)
+			it87_write_value(data, IT87_REG_VIN_MIN(i), 0);
+	}
+	for (i = 0; i < NUM_TEMP_LIMIT; i++) {
+		reg = it87_read_value(data, IT87_REG_TEMP_HIGH(i));
+		if (reg == 0xff)
+			it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127);
+	}
+}
+
+/* Check if voltage monitors are reset manually or by some reason */
+static void it87_check_voltage_monitors_reset(struct it87_data *data)
+{
+	int reg;
+
+	reg = it87_read_value(data, IT87_REG_VIN_ENABLE);
+	if ((reg & 0xff) == 0) {
+		/* Enable all voltage monitors */
+		it87_write_value(data, IT87_REG_VIN_ENABLE, 0xff);
+	}
+}
+
+/* Check if tachometers are reset manually or by some reason */
+static void it87_check_tachometers_reset(struct platform_device *pdev)
+{
+	struct it87_sio_data *sio_data = dev_get_platdata(&pdev->dev);
+	struct it87_data *data = platform_get_drvdata(pdev);
+	u8 mask, fan_main_ctrl;
+
+	mask = 0x70 & ~(sio_data->skip_fan << 4);
+	fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL);
+	if ((fan_main_ctrl & mask) == 0) {
+		/* Enable all fan tachometers */
+		fan_main_ctrl |= mask;
+		it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
+				 fan_main_ctrl);
+	}
+}
+
+/* Set tachometers to 16-bit mode if needed */
+static void it87_check_tachometers_16bit_mode(struct platform_device *pdev)
+{
+	struct it87_data *data = platform_get_drvdata(pdev);
+	int reg;
+
+	if (!has_fan16_config(data))
+		return;
+
+	reg = it87_read_value(data, IT87_REG_FAN_16BIT);
+	if (~reg & 0x07 & data->has_fan) {
+		dev_dbg(&pdev->dev,
+			"Setting fan1-3 to 16-bit mode\n");
+		it87_write_value(data, IT87_REG_FAN_16BIT,
+				 reg | 0x07);
+	}
+}
+
+static void it87_start_monitoring(struct it87_data *data)
+{
+	it87_write_value(data, IT87_REG_CONFIG,
+			 (it87_read_value(data, IT87_REG_CONFIG) & 0x3e)
+			 | (update_vbat ? 0x41 : 0x01));
+}
+
+/* Called when we have found a new IT87. */
+static void it87_init_device(struct platform_device *pdev)
+{
+	struct it87_sio_data *sio_data = dev_get_platdata(&pdev->dev);
+	struct it87_data *data = platform_get_drvdata(pdev);
+	int tmp, i;
+
+	/*
+	 * For each PWM channel:
+	 * - If it is in automatic mode, setting to manual mode should set
+	 *   the fan to full speed by default.
+	 * - If it is in manual mode, we need a mapping to temperature
+	 *   channels to use when later setting to automatic mode later.
+	 *   Use a 1:1 mapping by default (we are clueless.)
+	 * In both cases, the value can (and should) be changed by the user
+	 * prior to switching to a different mode.
+	 * Note that this is no longer needed for the IT8721F and later, as
+	 * these have separate registers for the temperature mapping and the
+	 * manual duty cycle.
+	 */
+	for (i = 0; i < NUM_AUTO_PWM; i++) {
+		data->pwm_temp_map[i] = i;
+		data->pwm_duty[i] = 0x7f;	/* Full speed */
+		data->auto_pwm[i][3] = 0x7f;	/* Full speed, hard-coded */
+	}
+
+	it87_check_limit_regs(data);
+
+	/*
+	 * Temperature channels are not forcibly enabled, as they can be
+	 * set to two different sensor types and we can't guess which one
+	 * is correct for a given system. These channels can be enabled at
+	 * run-time through the temp{1-3}_type sysfs accessors if needed.
+	 */
+
+	it87_check_voltage_monitors_reset(data);
+
+	it87_check_tachometers_reset(pdev);
+
+	data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL);
+	data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
+
+	it87_check_tachometers_16bit_mode(pdev);
+
+	/* Check for additional fans */
+	if (has_five_fans(data)) {
+		tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
+
+		if (tmp & BIT(4))
+			data->has_fan |= BIT(3); /* fan4 enabled */
+		if (tmp & BIT(5))
+			data->has_fan |= BIT(4); /* fan5 enabled */
+		if (has_six_fans(data) && (tmp & BIT(2)))
+			data->has_fan |= BIT(5); /* fan6 enabled */
+	}
+
+	/* Fan input pins may be used for alternative functions */
+	data->has_fan &= ~sio_data->skip_fan;
+
+	/* Check if pwm5, pwm6 are enabled */
+	if (has_six_pwm(data)) {
+		/* The following code may be IT8620E specific */
+		tmp = it87_read_value(data, IT87_REG_FAN_DIV);
+		if ((tmp & 0xc0) == 0xc0)
+			sio_data->skip_pwm |= BIT(4);
+		if (!(tmp & BIT(3)))
+			sio_data->skip_pwm |= BIT(5);
+	}
+
+	it87_start_monitoring(data);
+}
+
+/* Return 1 if and only if the PWM interface is safe to use */
+static int it87_check_pwm(struct device *dev)
+{
+	struct it87_data *data = dev_get_drvdata(dev);
+	/*
+	 * Some BIOSes fail to correctly configure the IT87 fans. All fans off
+	 * and polarity set to active low is sign that this is the case so we
+	 * disable pwm control to protect the user.
+	 */
+	int tmp = it87_read_value(data, IT87_REG_FAN_CTL);
+
+	if ((tmp & 0x87) == 0) {
+		if (fix_pwm_polarity) {
+			/*
+			 * The user asks us to attempt a chip reconfiguration.
+			 * This means switching to active high polarity and
+			 * inverting all fan speed values.
+			 */
+			int i;
+			u8 pwm[3];
+
+			for (i = 0; i < ARRAY_SIZE(pwm); i++)
+				pwm[i] = it87_read_value(data,
+							 IT87_REG_PWM[i]);
+
+			/*
+			 * If any fan is in automatic pwm mode, the polarity
+			 * might be correct, as suspicious as it seems, so we
+			 * better don't change anything (but still disable the
+			 * PWM interface).
+			 */
+			if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) {
+				dev_info(dev,
+					 "Reconfiguring PWM to active high polarity\n");
+				it87_write_value(data, IT87_REG_FAN_CTL,
+						 tmp | 0x87);
+				for (i = 0; i < 3; i++)
+					it87_write_value(data,
+							 IT87_REG_PWM[i],
+							 0x7f & ~pwm[i]);
+				return 1;
+			}
+
+			dev_info(dev,
+				 "PWM configuration is too broken to be fixed\n");
+		}
+
+		return 0;
+	} else if (fix_pwm_polarity) {
+		dev_info(dev,
+			 "PWM configuration looks sane, won't touch\n");
+	}
+
+	return 1;
+}
+
+static int it87_probe(struct platform_device *pdev)
+{
+	struct it87_data *data;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct it87_sio_data *sio_data = dev_get_platdata(dev);
+	int enable_pwm_interface;
+	struct device *hwmon_dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!devm_request_region(&pdev->dev, res->start, IT87_EC_EXTENT,
+				 DRVNAME)) {
+		dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
+			(unsigned long)res->start,
+			(unsigned long)(res->start + IT87_EC_EXTENT - 1));
+		return -EBUSY;
+	}
+
+	data = devm_kzalloc(&pdev->dev, sizeof(struct it87_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->addr = res->start;
+	data->sioaddr = sio_data->sioaddr;
+	data->type = sio_data->type;
+	data->features = it87_devices[sio_data->type].features;
+	data->peci_mask = it87_devices[sio_data->type].peci_mask;
+	data->old_peci_mask = it87_devices[sio_data->type].old_peci_mask;
+	/*
+	 * IT8705F Datasheet 0.4.1, 3h == Version G.
+	 * IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J.
+	 * These are the first revisions with 16-bit tachometer support.
+	 */
+	switch (data->type) {
+	case it87:
+		if (sio_data->revision >= 0x03) {
+			data->features &= ~FEAT_OLD_AUTOPWM;
+			data->features |= FEAT_FAN16_CONFIG | FEAT_16BIT_FANS;
+		}
+		break;
+	case it8712:
+		if (sio_data->revision >= 0x08) {
+			data->features &= ~FEAT_OLD_AUTOPWM;
+			data->features |= FEAT_FAN16_CONFIG | FEAT_16BIT_FANS |
+					  FEAT_FIVE_FANS;
+		}
+		break;
+	default:
+		break;
+	}
+
+	/* Now, we do the remaining detection. */
+	if ((it87_read_value(data, IT87_REG_CONFIG) & 0x80) ||
+	    it87_read_value(data, IT87_REG_CHIPID) != 0x90)
+		return -ENODEV;
+
+	platform_set_drvdata(pdev, data);
+
+	mutex_init(&data->update_lock);
+
+	/* Check PWM configuration */
+	enable_pwm_interface = it87_check_pwm(dev);
+	if (!enable_pwm_interface)
+		dev_info(dev,
+			 "Detected broken BIOS defaults, disabling PWM interface\n");
+
+	/* Starting with IT8721F, we handle scaling of internal voltages */
+	if (has_12mv_adc(data)) {
+		if (sio_data->internal & BIT(0))
+			data->in_scaled |= BIT(3);	/* in3 is AVCC */
+		if (sio_data->internal & BIT(1))
+			data->in_scaled |= BIT(7);	/* in7 is VSB */
+		if (sio_data->internal & BIT(2))
+			data->in_scaled |= BIT(8);	/* in8 is Vbat */
+		if (sio_data->internal & BIT(3))
+			data->in_scaled |= BIT(9);	/* in9 is AVCC */
+	} else if (sio_data->type == it8781 || sio_data->type == it8782 ||
+		   sio_data->type == it8783) {
+		if (sio_data->internal & BIT(0))
+			data->in_scaled |= BIT(3);	/* in3 is VCC5V */
+		if (sio_data->internal & BIT(1))
+			data->in_scaled |= BIT(7);	/* in7 is VCCH5V */
+	}
+
+	data->has_temp = 0x07;
+	if (sio_data->skip_temp & BIT(2)) {
+		if (sio_data->type == it8782 &&
+		    !(it87_read_value(data, IT87_REG_TEMP_EXTRA) & 0x80))
+			data->has_temp &= ~BIT(2);
+	}
+
+	data->in_internal = sio_data->internal;
+	data->need_in7_reroute = sio_data->need_in7_reroute;
+	data->has_in = 0x3ff & ~sio_data->skip_in;
+
+	if (has_six_temp(data)) {
+		u8 reg = it87_read_value(data, IT87_REG_TEMP456_ENABLE);
+
+		/* Check for additional temperature sensors */
+		if ((reg & 0x03) >= 0x02)
+			data->has_temp |= BIT(3);
+		if (((reg >> 2) & 0x03) >= 0x02)
+			data->has_temp |= BIT(4);
+		if (((reg >> 4) & 0x03) >= 0x02)
+			data->has_temp |= BIT(5);
+
+		/* Check for additional voltage sensors */
+		if ((reg & 0x03) == 0x01)
+			data->has_in |= BIT(10);
+		if (((reg >> 2) & 0x03) == 0x01)
+			data->has_in |= BIT(11);
+		if (((reg >> 4) & 0x03) == 0x01)
+			data->has_in |= BIT(12);
+	}
+
+	data->has_beep = !!sio_data->beep_pin;
+
+	/* Initialize the IT87 chip */
+	it87_init_device(pdev);
+
+	if (!sio_data->skip_vid) {
+		data->has_vid = true;
+		data->vrm = vid_which_vrm();
+		/* VID reading from Super-I/O config space if available */
+		data->vid = sio_data->vid_value;
+	}
+
+	/* Prepare for sysfs hooks */
+	data->groups[0] = &it87_group;
+	data->groups[1] = &it87_group_in;
+	data->groups[2] = &it87_group_temp;
+	data->groups[3] = &it87_group_fan;
+
+	if (enable_pwm_interface) {
+		data->has_pwm = BIT(ARRAY_SIZE(IT87_REG_PWM)) - 1;
+		data->has_pwm &= ~sio_data->skip_pwm;
+
+		data->groups[4] = &it87_group_pwm;
+		if (has_old_autopwm(data) || has_newer_autopwm(data))
+			data->groups[5] = &it87_group_auto_pwm;
+	}
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev,
+					it87_devices[sio_data->type].name,
+					data, data->groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static void __maybe_unused it87_resume_sio(struct platform_device *pdev)
+{
+	struct it87_data *data = dev_get_drvdata(&pdev->dev);
+	int err;
+	int reg2c;
+
+	if (!data->need_in7_reroute)
+		return;
+
+	err = superio_enter(data->sioaddr);
+	if (err) {
+		dev_warn(&pdev->dev,
+			 "Unable to enter Super I/O to reroute in7 (%d)",
+			 err);
+		return;
+	}
+
+	superio_select(data->sioaddr, GPIO);
+
+	reg2c = superio_inb(data->sioaddr, IT87_SIO_PINX2_REG);
+	if (!(reg2c & BIT(1))) {
+		dev_dbg(&pdev->dev,
+			"Routing internal VCCH5V to in7 again");
+
+		reg2c |= BIT(1);
+		superio_outb(data->sioaddr, IT87_SIO_PINX2_REG,
+			     reg2c);
+	}
+
+	superio_exit(data->sioaddr);
+}
+
+static int __maybe_unused it87_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct it87_data *data = dev_get_drvdata(dev);
+
+	it87_resume_sio(pdev);
+
+	mutex_lock(&data->update_lock);
+
+	it87_check_pwm(dev);
+	it87_check_limit_regs(data);
+	it87_check_voltage_monitors_reset(data);
+	it87_check_tachometers_reset(pdev);
+	it87_check_tachometers_16bit_mode(pdev);
+
+	it87_start_monitoring(data);
+
+	/* force update */
+	data->valid = 0;
+
+	mutex_unlock(&data->update_lock);
+
+	it87_update_device(dev);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(it87_dev_pm_ops, NULL, it87_resume);
+
+static struct platform_driver it87_driver = {
+	.driver = {
+		.name	= DRVNAME,
+		.pm     = &it87_dev_pm_ops,
+	},
+	.probe	= it87_probe,
+};
+
+static int __init it87_device_add(int index, unsigned short address,
+				  const struct it87_sio_data *sio_data)
+{
+	struct platform_device *pdev;
+	struct resource res = {
+		.start	= address + IT87_EC_OFFSET,
+		.end	= address + IT87_EC_OFFSET + IT87_EC_EXTENT - 1,
+		.name	= DRVNAME,
+		.flags	= IORESOURCE_IO,
+	};
+	int err;
+
+	err = acpi_check_resource_conflict(&res);
+	if (err)
+		return err;
+
+	pdev = platform_device_alloc(DRVNAME, address);
+	if (!pdev)
+		return -ENOMEM;
+
+	err = platform_device_add_resources(pdev, &res, 1);
+	if (err) {
+		pr_err("Device resource addition failed (%d)\n", err);
+		goto exit_device_put;
+	}
+
+	err = platform_device_add_data(pdev, sio_data,
+				       sizeof(struct it87_sio_data));
+	if (err) {
+		pr_err("Platform data allocation failed\n");
+		goto exit_device_put;
+	}
+
+	err = platform_device_add(pdev);
+	if (err) {
+		pr_err("Device addition failed (%d)\n", err);
+		goto exit_device_put;
+	}
+
+	it87_pdev[index] = pdev;
+	return 0;
+
+exit_device_put:
+	platform_device_put(pdev);
+	return err;
+}
+
+static int __init sm_it87_init(void)
+{
+	int sioaddr[2] = { REG_2E, REG_4E };
+	struct it87_sio_data sio_data;
+	unsigned short isa_address[2];
+	bool found = false;
+	int i, err;
+
+	err = platform_driver_register(&it87_driver);
+	if (err)
+		return err;
+
+	for (i = 0; i < ARRAY_SIZE(sioaddr); i++) {
+		memset(&sio_data, 0, sizeof(struct it87_sio_data));
+		isa_address[i] = 0;
+		err = it87_find(sioaddr[i], &isa_address[i], &sio_data);
+		if (err || isa_address[i] == 0)
+			continue;
+		/*
+		 * Don't register second chip if its ISA address matches
+		 * the first chip's ISA address.
+		 */
+		if (i && isa_address[i] == isa_address[0])
+			break;
+
+		err = it87_device_add(i, isa_address[i], &sio_data);
+		if (err)
+			goto exit_dev_unregister;
+
+		found = true;
+
+		/*
+		 * IT8705F may respond on both SIO addresses.
+		 * Stop probing after finding one.
+		 */
+		if (sio_data.type == it87)
+			break;
+	}
+
+	if (!found) {
+		err = -ENODEV;
+		goto exit_unregister;
+	}
+	return 0;
+
+exit_dev_unregister:
+	/* NULL check handled by platform_device_unregister */
+	platform_device_unregister(it87_pdev[0]);
+exit_unregister:
+	platform_driver_unregister(&it87_driver);
+	return err;
+}
+
+static void __exit sm_it87_exit(void)
+{
+	/* NULL check handled by platform_device_unregister */
+	platform_device_unregister(it87_pdev[1]);
+	platform_device_unregister(it87_pdev[0]);
+	platform_driver_unregister(&it87_driver);
+}
+
+MODULE_AUTHOR("Chris Gauthron, Jean Delvare <jdelvare@suse.de>");
+MODULE_DESCRIPTION("IT8705F/IT871xF/IT872xF hardware monitoring driver");
+module_param(update_vbat, bool, 0);
+MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
+module_param(fix_pwm_polarity, bool, 0);
+MODULE_PARM_DESC(fix_pwm_polarity,
+		 "Force PWM polarity to active high (DANGEROUS)");
+MODULE_LICENSE("GPL");
+
+module_init(sm_it87_init);
+module_exit(sm_it87_exit);