Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 296 insertions, 0 deletions

diff --git a/drivers/hwmon/max1111.c b/drivers/hwmon/max1111.c
new file mode 100644
index 000000000..8ddd4d690
--- /dev/null
+++ b/drivers/hwmon/max1111.c
@@ -0,0 +1,296 @@
+/*
+ * max1111.c - +2.7V, Low-Power, Multichannel, Serial 8-bit ADCs
+ *
+ * Based on arch/arm/mach-pxa/corgi_ssp.c
+ *
+ * Copyright (C) 2004-2005 Richard Purdie
+ *
+ * Copyright (C) 2008 Marvell International Ltd.
+ *	Eric Miao <eric.miao@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+
+enum chips { max1110, max1111, max1112, max1113 };
+
+#define MAX1111_TX_BUF_SIZE	1
+#define MAX1111_RX_BUF_SIZE	2
+
+/* MAX1111 Commands */
+#define MAX1111_CTRL_PD0      (1u << 0)
+#define MAX1111_CTRL_PD1      (1u << 1)
+#define MAX1111_CTRL_SGL      (1u << 2)
+#define MAX1111_CTRL_UNI      (1u << 3)
+#define MAX1110_CTRL_SEL_SH   (4)
+#define MAX1111_CTRL_SEL_SH   (5)	/* NOTE: bit 4 is ignored */
+#define MAX1111_CTRL_STR      (1u << 7)
+
+struct max1111_data {
+	struct spi_device	*spi;
+	struct device		*hwmon_dev;
+	struct spi_message	msg;
+	struct spi_transfer	xfer[2];
+	uint8_t tx_buf[MAX1111_TX_BUF_SIZE];
+	uint8_t rx_buf[MAX1111_RX_BUF_SIZE];
+	struct mutex		drvdata_lock;
+	/* protect msg, xfer and buffers from multiple access */
+	int			sel_sh;
+	int			lsb;
+};
+
+static int max1111_read(struct device *dev, int channel)
+{
+	struct max1111_data *data = dev_get_drvdata(dev);
+	uint8_t v1, v2;
+	int err;
+
+	/* writing to drvdata struct is not thread safe, wait on mutex */
+	mutex_lock(&data->drvdata_lock);
+
+	data->tx_buf[0] = (channel << data->sel_sh) |
+		MAX1111_CTRL_PD0 | MAX1111_CTRL_PD1 |
+		MAX1111_CTRL_SGL | MAX1111_CTRL_UNI | MAX1111_CTRL_STR;
+
+	err = spi_sync(data->spi, &data->msg);
+	if (err < 0) {
+		dev_err(dev, "spi_sync failed with %d\n", err);
+		mutex_unlock(&data->drvdata_lock);
+		return err;
+	}
+
+	v1 = data->rx_buf[0];
+	v2 = data->rx_buf[1];
+
+	mutex_unlock(&data->drvdata_lock);
+
+	if ((v1 & 0xc0) || (v2 & 0x3f))
+		return -EINVAL;
+
+	return (v1 << 2) | (v2 >> 6);
+}
+
+#ifdef CONFIG_SHARPSL_PM
+static struct max1111_data *the_max1111;
+
+int max1111_read_channel(int channel)
+{
+	if (!the_max1111 || !the_max1111->spi)
+		return -ENODEV;
+
+	return max1111_read(&the_max1111->spi->dev, channel);
+}
+EXPORT_SYMBOL(max1111_read_channel);
+#endif
+
+/*
+ * NOTE: SPI devices do not have a default 'name' attribute, which is
+ * likely to be used by hwmon applications to distinguish between
+ * different devices, explicitly add a name attribute here.
+ */
+static ssize_t name_show(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%s\n", to_spi_device(dev)->modalias);
+}
+
+static ssize_t show_adc(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct max1111_data *data = dev_get_drvdata(dev);
+	int channel = to_sensor_dev_attr(attr)->index;
+	int ret;
+
+	ret = max1111_read(dev, channel);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Assume the reference voltage to be 2.048V or 4.096V, with an 8-bit
+	 * sample. The LSB weight is 8mV or 16mV depending on the chip type.
+	 */
+	return sprintf(buf, "%d\n", ret * data->lsb);
+}
+
+#define MAX1111_ADC_ATTR(_id)		\
+	SENSOR_DEVICE_ATTR(in##_id##_input, S_IRUGO, show_adc, NULL, _id)
+
+static DEVICE_ATTR_RO(name);
+static MAX1111_ADC_ATTR(0);
+static MAX1111_ADC_ATTR(1);
+static MAX1111_ADC_ATTR(2);
+static MAX1111_ADC_ATTR(3);
+static MAX1111_ADC_ATTR(4);
+static MAX1111_ADC_ATTR(5);
+static MAX1111_ADC_ATTR(6);
+static MAX1111_ADC_ATTR(7);
+
+static struct attribute *max1111_attributes[] = {
+	&dev_attr_name.attr,
+	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group max1111_attr_group = {
+	.attrs	= max1111_attributes,
+};
+
+static struct attribute *max1110_attributes[] = {
+	&sensor_dev_attr_in4_input.dev_attr.attr,
+	&sensor_dev_attr_in5_input.dev_attr.attr,
+	&sensor_dev_attr_in6_input.dev_attr.attr,
+	&sensor_dev_attr_in7_input.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group max1110_attr_group = {
+	.attrs	= max1110_attributes,
+};
+
+static int setup_transfer(struct max1111_data *data)
+{
+	struct spi_message *m;
+	struct spi_transfer *x;
+
+	m = &data->msg;
+	x = &data->xfer[0];
+
+	spi_message_init(m);
+
+	x->tx_buf = &data->tx_buf[0];
+	x->len = MAX1111_TX_BUF_SIZE;
+	spi_message_add_tail(x, m);
+
+	x++;
+	x->rx_buf = &data->rx_buf[0];
+	x->len = MAX1111_RX_BUF_SIZE;
+	spi_message_add_tail(x, m);
+
+	return 0;
+}
+
+static int max1111_probe(struct spi_device *spi)
+{
+	enum chips chip = spi_get_device_id(spi)->driver_data;
+	struct max1111_data *data;
+	int err;
+
+	spi->bits_per_word = 8;
+	spi->mode = SPI_MODE_0;
+	err = spi_setup(spi);
+	if (err < 0)
+		return err;
+
+	data = devm_kzalloc(&spi->dev, sizeof(struct max1111_data), GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
+
+	switch (chip) {
+	case max1110:
+		data->lsb = 8;
+		data->sel_sh = MAX1110_CTRL_SEL_SH;
+		break;
+	case max1111:
+		data->lsb = 8;
+		data->sel_sh = MAX1111_CTRL_SEL_SH;
+		break;
+	case max1112:
+		data->lsb = 16;
+		data->sel_sh = MAX1110_CTRL_SEL_SH;
+		break;
+	case max1113:
+		data->lsb = 16;
+		data->sel_sh = MAX1111_CTRL_SEL_SH;
+		break;
+	}
+	err = setup_transfer(data);
+	if (err)
+		return err;
+
+	mutex_init(&data->drvdata_lock);
+
+	data->spi = spi;
+	spi_set_drvdata(spi, data);
+
+	err = sysfs_create_group(&spi->dev.kobj, &max1111_attr_group);
+	if (err) {
+		dev_err(&spi->dev, "failed to create attribute group\n");
+		return err;
+	}
+	if (chip == max1110 || chip == max1112) {
+		err = sysfs_create_group(&spi->dev.kobj, &max1110_attr_group);
+		if (err) {
+			dev_err(&spi->dev,
+				"failed to create extended attribute group\n");
+			goto err_remove;
+		}
+	}
+
+	data->hwmon_dev = hwmon_device_register(&spi->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		dev_err(&spi->dev, "failed to create hwmon device\n");
+		err = PTR_ERR(data->hwmon_dev);
+		goto err_remove;
+	}
+
+#ifdef CONFIG_SHARPSL_PM
+	the_max1111 = data;
+#endif
+	return 0;
+
+err_remove:
+	sysfs_remove_group(&spi->dev.kobj, &max1110_attr_group);
+	sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group);
+	return err;
+}
+
+static int max1111_remove(struct spi_device *spi)
+{
+	struct max1111_data *data = spi_get_drvdata(spi);
+
+#ifdef CONFIG_SHARPSL_PM
+	the_max1111 = NULL;
+#endif
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&spi->dev.kobj, &max1110_attr_group);
+	sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group);
+	mutex_destroy(&data->drvdata_lock);
+	return 0;
+}
+
+static const struct spi_device_id max1111_ids[] = {
+	{ "max1110", max1110 },
+	{ "max1111", max1111 },
+	{ "max1112", max1112 },
+	{ "max1113", max1113 },
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, max1111_ids);
+
+static struct spi_driver max1111_driver = {
+	.driver		= {
+		.name	= "max1111",
+	},
+	.id_table	= max1111_ids,
+	.probe		= max1111_probe,
+	.remove		= max1111_remove,
+};
+
+module_spi_driver(max1111_driver);
+
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_DESCRIPTION("MAX1110/MAX1111/MAX1112/MAX1113 ADC Driver");
+MODULE_LICENSE("GPL");