Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 313 insertions, 0 deletions

diff --git a/drivers/hwmon/sht21.c b/drivers/hwmon/sht21.c
new file mode 100644
index 000000000..2c7ba7092
--- /dev/null
+++ b/drivers/hwmon/sht21.c
@@ -0,0 +1,313 @@
+/* Sensirion SHT21 humidity and temperature sensor driver
+ *
+ * Copyright (C) 2010 Urs Fleisch <urs.fleisch@sensirion.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Data sheet available at http://www.sensirion.com/file/datasheet_sht21
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+
+/* I2C command bytes */
+#define SHT21_TRIG_T_MEASUREMENT_HM  0xe3
+#define SHT21_TRIG_RH_MEASUREMENT_HM 0xe5
+#define SHT21_READ_SNB_CMD1 0xFA
+#define SHT21_READ_SNB_CMD2 0x0F
+#define SHT21_READ_SNAC_CMD1 0xFC
+#define SHT21_READ_SNAC_CMD2 0xC9
+
+/**
+ * struct sht21 - SHT21 device specific data
+ * @client: I2C client device
+ * @lock: mutex to protect measurement values
+ * @last_update: time of last update (jiffies)
+ * @temperature: cached temperature measurement value
+ * @humidity: cached humidity measurement value
+ * @valid: only 0 before first measurement is taken
+ * @eic: cached electronic identification code text
+ */
+struct sht21 {
+	struct i2c_client *client;
+	struct mutex lock;
+	unsigned long last_update;
+	int temperature;
+	int humidity;
+	char valid;
+	char eic[18];
+};
+
+/**
+ * sht21_temp_ticks_to_millicelsius() - convert raw temperature ticks to
+ * milli celsius
+ * @ticks: temperature ticks value received from sensor
+ */
+static inline int sht21_temp_ticks_to_millicelsius(int ticks)
+{
+	ticks &= ~0x0003; /* clear status bits */
+	/*
+	 * Formula T = -46.85 + 175.72 * ST / 2^16 from data sheet 6.2,
+	 * optimized for integer fixed point (3 digits) arithmetic
+	 */
+	return ((21965 * ticks) >> 13) - 46850;
+}
+
+/**
+ * sht21_rh_ticks_to_per_cent_mille() - convert raw humidity ticks to
+ * one-thousandths of a percent relative humidity
+ * @ticks: humidity ticks value received from sensor
+ */
+static inline int sht21_rh_ticks_to_per_cent_mille(int ticks)
+{
+	ticks &= ~0x0003; /* clear status bits */
+	/*
+	 * Formula RH = -6 + 125 * SRH / 2^16 from data sheet 6.1,
+	 * optimized for integer fixed point (3 digits) arithmetic
+	 */
+	return ((15625 * ticks) >> 13) - 6000;
+}
+
+/**
+ * sht21_update_measurements() - get updated measurements from device
+ * @dev: device
+ *
+ * Returns 0 on success, else negative errno.
+ */
+static int sht21_update_measurements(struct device *dev)
+{
+	int ret = 0;
+	struct sht21 *sht21 = dev_get_drvdata(dev);
+	struct i2c_client *client = sht21->client;
+
+	mutex_lock(&sht21->lock);
+	/*
+	 * Data sheet 2.4:
+	 * SHT2x should not be active for more than 10% of the time - e.g.
+	 * maximum two measurements per second at 12bit accuracy shall be made.
+	 */
+	if (time_after(jiffies, sht21->last_update + HZ / 2) || !sht21->valid) {
+		ret = i2c_smbus_read_word_swapped(client,
+						  SHT21_TRIG_T_MEASUREMENT_HM);
+		if (ret < 0)
+			goto out;
+		sht21->temperature = sht21_temp_ticks_to_millicelsius(ret);
+		ret = i2c_smbus_read_word_swapped(client,
+						  SHT21_TRIG_RH_MEASUREMENT_HM);
+		if (ret < 0)
+			goto out;
+		sht21->humidity = sht21_rh_ticks_to_per_cent_mille(ret);
+		sht21->last_update = jiffies;
+		sht21->valid = 1;
+	}
+out:
+	mutex_unlock(&sht21->lock);
+
+	return ret >= 0 ? 0 : ret;
+}
+
+/**
+ * sht21_show_temperature() - show temperature measurement value in sysfs
+ * @dev: device
+ * @attr: device attribute
+ * @buf: sysfs buffer (PAGE_SIZE) where measurement values are written to
+ *
+ * Will be called on read access to temp1_input sysfs attribute.
+ * Returns number of bytes written into buffer, negative errno on error.
+ */
+static ssize_t sht21_show_temperature(struct device *dev,
+	struct device_attribute *attr,
+	char *buf)
+{
+	struct sht21 *sht21 = dev_get_drvdata(dev);
+	int ret;
+
+	ret = sht21_update_measurements(dev);
+	if (ret < 0)
+		return ret;
+	return sprintf(buf, "%d\n", sht21->temperature);
+}
+
+/**
+ * sht21_show_humidity() - show humidity measurement value in sysfs
+ * @dev: device
+ * @attr: device attribute
+ * @buf: sysfs buffer (PAGE_SIZE) where measurement values are written to
+ *
+ * Will be called on read access to humidity1_input sysfs attribute.
+ * Returns number of bytes written into buffer, negative errno on error.
+ */
+static ssize_t sht21_show_humidity(struct device *dev,
+	struct device_attribute *attr,
+	char *buf)
+{
+	struct sht21 *sht21 = dev_get_drvdata(dev);
+	int ret;
+
+	ret = sht21_update_measurements(dev);
+	if (ret < 0)
+		return ret;
+	return sprintf(buf, "%d\n", sht21->humidity);
+}
+
+static ssize_t eic_read(struct sht21 *sht21)
+{
+	struct i2c_client *client = sht21->client;
+	u8 tx[2];
+	u8 rx[8];
+	u8 eic[8];
+	struct i2c_msg msgs[2] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = 2,
+			.buf = tx,
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = 8,
+			.buf = rx,
+		},
+	};
+	int ret;
+
+	tx[0] = SHT21_READ_SNB_CMD1;
+	tx[1] = SHT21_READ_SNB_CMD2;
+	ret = i2c_transfer(client->adapter, msgs, 2);
+	if (ret < 0)
+		goto out;
+	eic[2] = rx[0];
+	eic[3] = rx[2];
+	eic[4] = rx[4];
+	eic[5] = rx[6];
+
+	tx[0] = SHT21_READ_SNAC_CMD1;
+	tx[1] = SHT21_READ_SNAC_CMD2;
+	msgs[1].len = 6;
+	ret = i2c_transfer(client->adapter, msgs, 2);
+	if (ret < 0)
+		goto out;
+	eic[0] = rx[3];
+	eic[1] = rx[4];
+	eic[6] = rx[0];
+	eic[7] = rx[1];
+
+	ret = snprintf(sht21->eic, sizeof(sht21->eic),
+		       "%02x%02x%02x%02x%02x%02x%02x%02x\n",
+		       eic[0], eic[1], eic[2], eic[3],
+		       eic[4], eic[5], eic[6], eic[7]);
+out:
+	if (ret < 0)
+		sht21->eic[0] = 0;
+
+	return ret;
+}
+
+/**
+ * eic_show() - show Electronic Identification Code in sysfs
+ * @dev: device
+ * @attr: device attribute
+ * @buf: sysfs buffer (PAGE_SIZE) where EIC is written
+ *
+ * Will be called on read access to eic sysfs attribute.
+ * Returns number of bytes written into buffer, negative errno on error.
+ */
+static ssize_t eic_show(struct device *dev,
+	struct device_attribute *attr,
+	char *buf)
+{
+	struct sht21 *sht21 = dev_get_drvdata(dev);
+	int ret;
+
+	ret = sizeof(sht21->eic) - 1;
+	mutex_lock(&sht21->lock);
+	if (!sht21->eic[0])
+		ret = eic_read(sht21);
+	if (ret > 0)
+		memcpy(buf, sht21->eic, ret);
+	mutex_unlock(&sht21->lock);
+	return ret;
+}
+
+/* sysfs attributes */
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, sht21_show_temperature,
+	NULL, 0);
+static SENSOR_DEVICE_ATTR(humidity1_input, S_IRUGO, sht21_show_humidity,
+	NULL, 0);
+static DEVICE_ATTR_RO(eic);
+
+static struct attribute *sht21_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_humidity1_input.dev_attr.attr,
+	&dev_attr_eic.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(sht21);
+
+static int sht21_probe(struct i2c_client *client,
+	const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct device *hwmon_dev;
+	struct sht21 *sht21;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_WORD_DATA)) {
+		dev_err(&client->dev,
+			"adapter does not support SMBus word transactions\n");
+		return -ENODEV;
+	}
+
+	sht21 = devm_kzalloc(dev, sizeof(*sht21), GFP_KERNEL);
+	if (!sht21)
+		return -ENOMEM;
+
+	sht21->client = client;
+
+	mutex_init(&sht21->lock);
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+							   sht21, sht21_groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+/* Device ID table */
+static const struct i2c_device_id sht21_id[] = {
+	{ "sht21", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sht21_id);
+
+static struct i2c_driver sht21_driver = {
+	.driver.name = "sht21",
+	.probe       = sht21_probe,
+	.id_table    = sht21_id,
+};
+
+module_i2c_driver(sht21_driver);
+
+MODULE_AUTHOR("Urs Fleisch <urs.fleisch@sensirion.com>");
+MODULE_DESCRIPTION("Sensirion SHT21 humidity and temperature sensor driver");
+MODULE_LICENSE("GPL");