Adding upstream version 4.19.304.upstream/4.19.304upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

5 files changed, 50 insertions, 25 deletions

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index fb0ddaad8..c18b899e5 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -712,15 +712,11 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
 		return i801_check_post(priv, status);
 	}
 
-	for (i = 1; i <= len; i++) {
-		if (i == len && read_write == I2C_SMBUS_READ)
-			smbcmd |= SMBHSTCNT_LAST_BYTE;
-		outb_p(smbcmd, SMBHSTCNT(priv));
-
-		if (i == 1)
-			outb_p(inb(SMBHSTCNT(priv)) | SMBHSTCNT_START,
-			       SMBHSTCNT(priv));
+	if (len == 1 && read_write == I2C_SMBUS_READ)
+		smbcmd |= SMBHSTCNT_LAST_BYTE;
+	outb_p(smbcmd | SMBHSTCNT_START, SMBHSTCNT(priv));
 
+	for (i = 1; i <= len; i++) {
 		status = i801_wait_byte_done(priv);
 		if (status)
 			goto exit;
@@ -743,9 +739,12 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
 			data->block[0] = len;
 		}
 
-		/* Retrieve/store value in SMBBLKDAT */
-		if (read_write == I2C_SMBUS_READ)
+		if (read_write == I2C_SMBUS_READ) {
 			data->block[i] = inb_p(SMBBLKDAT(priv));
+			if (i == len - 1)
+				outb_p(smbcmd | SMBHSTCNT_LAST_BYTE, SMBHSTCNT(priv));
+		}
+
 		if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
 			outb_p(data->block[i+1], SMBBLKDAT(priv));
 
@@ -1679,6 +1678,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		"SMBus I801 adapter at %04lx", priv->smba);
 	err = i2c_add_adapter(&priv->adapter);
 	if (err) {
+		platform_device_unregister(priv->tco_pdev);
 		i801_acpi_remove(priv);
 		return err;
 	}
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 61ab462fd..fe7642b91 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -421,7 +421,7 @@ static void rk3x_i2c_handle_read(struct rk3x_i2c *i2c, unsigned int ipd)
 {
 	unsigned int i;
 	unsigned int len = i2c->msg->len - i2c->processed;
-	u32 uninitialized_var(val);
+	u32 val;
 	u8 byte;
 
 	/* we only care for MBRF here. */
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index e352c1608..cbffe303f 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -959,9 +959,10 @@ static int stm32f7_i2c_smbus_xfer_msg(struct stm32f7_i2c_dev *i2c_dev,
 	/* Configure PEC */
 	if ((flags & I2C_CLIENT_PEC) && f7_msg->size != I2C_SMBUS_QUICK) {
 		cr1 |= STM32F7_I2C_CR1_PECEN;
-		cr2 |= STM32F7_I2C_CR2_PECBYTE;
-		if (!f7_msg->read_write)
+		if (!f7_msg->read_write) {
+			cr2 |= STM32F7_I2C_CR2_PECBYTE;
 			f7_msg->count++;
+		}
 	} else {
 		cr1 &= ~STM32F7_I2C_CR1_PECEN;
 		cr2 &= ~STM32F7_I2C_CR2_PECBYTE;
@@ -1049,8 +1050,10 @@ static void stm32f7_i2c_smbus_rep_start(struct stm32f7_i2c_dev *i2c_dev)
 	f7_msg->stop = true;
 
 	/* Add one byte for PEC if needed */
-	if (cr1 & STM32F7_I2C_CR1_PECEN)
+	if (cr1 & STM32F7_I2C_CR1_PECEN) {
+		cr2 |= STM32F7_I2C_CR2_PECBYTE;
 		f7_msg->count++;
+	}
 
 	/* Set number of bytes to be transferred */
 	cr2 &= ~(STM32F7_I2C_CR2_NBYTES_MASK);
diff --git a/drivers/i2c/busses/i2c-sun6i-p2wi.c b/drivers/i2c/busses/i2c-sun6i-p2wi.c
index 7c07ce116..540c33f4e 100644
--- a/drivers/i2c/busses/i2c-sun6i-p2wi.c
+++ b/drivers/i2c/busses/i2c-sun6i-p2wi.c
@@ -202,6 +202,11 @@ static int p2wi_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	if (clk_freq == 0) {
+		dev_err(dev, "clock-frequency is set to 0 in DT\n");
+		return -EINVAL;
+	}
+
 	if (of_get_child_count(np) > 1) {
 		dev_err(dev, "P2WI only supports one slave device\n");
 		return -EINVAL;
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 03ce9b7d6..c1f85114a 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -362,6 +362,9 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
 	struct xiic_i2c *i2c = dev_id;
 	u32 pend, isr, ier;
 	u32 clr = 0;
+	int xfer_more = 0;
+	int wakeup_req = 0;
+	int wakeup_code = 0;
 
 	/* Get the interrupt Status from the IPIF. There is no clearing of
 	 * interrupts in the IPIF. Interrupts must be cleared at the source.
@@ -398,10 +401,16 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
 		 */
 		xiic_reinit(i2c);
 
-		if (i2c->rx_msg)
-			xiic_wakeup(i2c, STATE_ERROR);
-		if (i2c->tx_msg)
-			xiic_wakeup(i2c, STATE_ERROR);
+		if (i2c->rx_msg) {
+			wakeup_req = 1;
+			wakeup_code = STATE_ERROR;
+		}
+		if (i2c->tx_msg) {
+			wakeup_req = 1;
+			wakeup_code = STATE_ERROR;
+		}
+		/* don't try to handle other events */
+		goto out;
 	}
 	if (pend & XIIC_INTR_RX_FULL_MASK) {
 		/* Receive register/FIFO is full */
@@ -435,8 +444,7 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
 				i2c->tx_msg++;
 				dev_dbg(i2c->adap.dev.parent,
 					"%s will start next...\n", __func__);
-
-				__xiic_start_xfer(i2c);
+				xfer_more = 1;
 			}
 		}
 	}
@@ -450,11 +458,13 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
 		if (!i2c->tx_msg)
 			goto out;
 
-		if ((i2c->nmsgs == 1) && !i2c->rx_msg &&
-			xiic_tx_space(i2c) == 0)
-			xiic_wakeup(i2c, STATE_DONE);
+		wakeup_req = 1;
+
+		if (i2c->nmsgs == 1 && !i2c->rx_msg &&
+		    xiic_tx_space(i2c) == 0)
+			wakeup_code = STATE_DONE;
 		else
-			xiic_wakeup(i2c, STATE_ERROR);
+			wakeup_code = STATE_ERROR;
 	}
 	if (pend & (XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK)) {
 		/* Transmit register/FIFO is empty or ½ empty */
@@ -478,7 +488,7 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
 			if (i2c->nmsgs > 1) {
 				i2c->nmsgs--;
 				i2c->tx_msg++;
-				__xiic_start_xfer(i2c);
+				xfer_more = 1;
 			} else {
 				xiic_irq_dis(i2c, XIIC_INTR_TX_HALF_MASK);
 
@@ -496,6 +506,13 @@ out:
 	dev_dbg(i2c->adap.dev.parent, "%s clr: 0x%x\n", __func__, clr);
 
 	xiic_setreg32(i2c, XIIC_IISR_OFFSET, clr);
+	if (xfer_more)
+		__xiic_start_xfer(i2c);
+	if (wakeup_req)
+		xiic_wakeup(i2c, wakeup_code);
+
+	WARN_ON(xfer_more && wakeup_req);
+
 	mutex_unlock(&i2c->lock);
 	return IRQ_HANDLED;
 }