Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 854 insertions, 0 deletions

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
new file mode 100644
index 000000000..ca59a2be9
--- /dev/null
+++ b/drivers/input/misc/Kconfig
@@ -0,0 +1,854 @@
+#
+# Input misc drivers configuration
+#
+menuconfig INPUT_MISC
+	bool "Miscellaneous devices"
+	help
+	  Say Y here, and a list of miscellaneous input drivers will be displayed.
+	  Everything that didn't fit into the other categories is here. This option
+	  doesn't affect the kernel.
+
+	  If unsure, say Y.
+
+if INPUT_MISC
+
+config INPUT_88PM860X_ONKEY
+	tristate "88PM860x ONKEY support"
+	depends on MFD_88PM860X
+	help
+	  Support the ONKEY of Marvell 88PM860x PMICs as an input device
+	  reporting power button status.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 88pm860x_onkey.
+
+config INPUT_88PM80X_ONKEY
+	tristate "88PM80x ONKEY support"
+	depends on MFD_88PM800
+	help
+	  Support the ONKEY of Marvell 88PM80x PMICs as an input device
+	  reporting power button status.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 88pm80x_onkey.
+
+config INPUT_AB8500_PONKEY
+	tristate "AB8500 Pon (PowerOn) Key"
+	depends on AB8500_CORE
+	help
+	  Say Y here to use the PowerOn Key for ST-Ericsson's AB8500
+	  Mix-Sig PMIC.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ab8500-ponkey.
+
+config INPUT_AD714X
+	tristate "Analog Devices AD714x Capacitance Touch Sensor"
+	help
+	  Say Y here if you want to support an AD7142/3/7/8/7A touch sensor.
+
+	  You should select a bus connection too.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad714x.
+
+config INPUT_AD714X_I2C
+	tristate "support I2C bus connection"
+	depends on INPUT_AD714X && I2C
+	default y
+	help
+	  Say Y here if you have AD7142/AD7147 hooked to an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad714x-i2c.
+
+config INPUT_AD714X_SPI
+	tristate "support SPI bus connection"
+	depends on INPUT_AD714X && SPI
+	default y
+	help
+	  Say Y here if you have AD7142/AD7147 hooked to a SPI bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad714x-spi.
+
+config INPUT_ARIZONA_HAPTICS
+	tristate "Arizona haptics support"
+	depends on MFD_ARIZONA && SND_SOC
+	select INPUT_FF_MEMLESS
+	help
+	  Say Y to enable support for the haptics module in Arizona CODECs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called arizona-haptics.
+
+config INPUT_ATMEL_CAPTOUCH
+	tristate "Atmel Capacitive Touch Button Driver"
+	depends on OF || COMPILE_TEST
+	depends on I2C
+	help
+	  Say Y here if an Atmel Capacitive Touch Button device which
+	  implements "captouch" protocol is connected to I2C bus. Typically
+	  this device consists of Atmel Touch sensor controlled by AtMegaXX
+	  MCU running firmware based on Qtouch library.
+	  One should find "atmel,captouch" node in the board specific DTS.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called atmel_captouch.
+
+config INPUT_BMA150
+	tristate "BMA150/SMB380 acceleration sensor support"
+	depends on I2C
+	select INPUT_POLLDEV
+	help
+	  Say Y here if you have Bosch Sensortec's BMA150 or SMB380
+	  acceleration sensor hooked to an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bma150.
+
+config INPUT_E3X0_BUTTON
+	tristate "NI Ettus Research USRP E3xx Button support."
+	default n
+	help
+	  Say Y here to enable support for the NI Ettus Research
+	  USRP E3xx Button.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called e3x0_button.
+
+config INPUT_PCSPKR
+	tristate "PC Speaker support"
+	depends on PCSPKR_PLATFORM
+	help
+	  Say Y here if you want the standard PC Speaker to be used for
+	  bells and whistles.
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcspkr.
+
+config INPUT_PM8941_PWRKEY
+	tristate "Qualcomm PM8941 power key support"
+	depends on MFD_SPMI_PMIC
+	help
+	  Say Y here if you want support for the power key usually found
+	  on boards using a Qualcomm PM8941 compatible PMIC.
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pm8941-pwrkey.
+
+config INPUT_PM8XXX_VIBRATOR
+	tristate "Qualcomm PM8XXX vibrator support"
+	depends on MFD_PM8XXX || MFD_SPMI_PMIC
+	select INPUT_FF_MEMLESS
+	help
+	  This option enables device driver support for the vibrator
+	  on Qualcomm PM8xxx chip. This driver supports ff-memless interface
+	  from input framework.
+
+	  To compile this driver as module, choose M here: the
+	  module will be called pm8xxx-vibrator.
+
+config INPUT_PMIC8XXX_PWRKEY
+	tristate "PMIC8XXX power key support"
+	depends on MFD_PM8XXX
+	help
+	  Say Y here if you want support for the PMIC8XXX power key.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pmic8xxx-pwrkey.
+
+config INPUT_SPARCSPKR
+	tristate "SPARC Speaker support"
+	depends on PCI && SPARC64
+	help
+	  Say Y here if you want the standard Speaker on Sparc PCI systems
+	  to be used for bells and whistles.
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sparcspkr.
+
+config INPUT_M68K_BEEP
+	tristate "M68k Beeper support"
+	depends on M68K
+
+config INPUT_MAX77693_HAPTIC
+	tristate "MAXIM MAX77693/MAX77843 haptic controller support"
+	depends on (MFD_MAX77693 || MFD_MAX77843) && PWM
+	select INPUT_FF_MEMLESS
+	help
+	  This option enables support for the haptic controller on
+	  MAXIM MAX77693 and MAX77843 chips.
+
+	  To compile this driver as module, choose M here: the
+	  module will be called max77693-haptic.
+
+config INPUT_MAX8925_ONKEY
+	tristate "MAX8925 ONKEY support"
+	depends on MFD_MAX8925
+	help
+	  Support the ONKEY of MAX8925 PMICs as an input device
+	  reporting power button status.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called max8925_onkey.
+
+config INPUT_MAX8997_HAPTIC
+	tristate "MAXIM MAX8997 haptic controller support"
+	depends on PWM && MFD_MAX8997
+	select INPUT_FF_MEMLESS
+	help
+	  This option enables device driver support for the haptic controller
+	  on MAXIM MAX8997 chip. This driver supports ff-memless interface
+	  from input framework.
+
+	  To compile this driver as module, choose M here: the
+	  module will be called max8997-haptic.
+
+config INPUT_MC13783_PWRBUTTON
+	tristate "MC13783 ON buttons"
+	depends on MFD_MC13XXX
+	help
+	  Support the ON buttons of MC13783 PMIC as an input device
+	  reporting power button status.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mc13783-pwrbutton.
+
+config INPUT_MMA8450
+	tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer"
+	depends on I2C
+	select INPUT_POLLDEV
+	help
+	  Say Y here if you want to support Freescale's MMA8450 Accelerometer
+	  through I2C interface.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mma8450.
+
+config INPUT_APANEL
+	tristate "Fujitsu Lifebook Application Panel buttons"
+	depends on X86 && I2C && LEDS_CLASS
+	select INPUT_POLLDEV
+	select CHECK_SIGNATURE
+	help
+	 Say Y here for support of the Application Panel buttons, used on
+	 Fujitsu Lifebook. These are attached to the mainboard through
+	 an SMBus interface managed by the I2C Intel ICH (i801) driver,
+	 which you should also build for this kernel.
+
+	 To compile this driver as a module, choose M here: the module will
+	 be called apanel.
+
+config INPUT_GP2A
+	tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip
+	  hooked to an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gp2ap002a00f.
+
+config INPUT_GPIO_BEEPER
+	tristate "Generic GPIO Beeper support"
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  Say Y here if you have a beeper connected to a GPIO pin.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gpio-beeper.
+
+config INPUT_GPIO_DECODER
+	tristate "Polled GPIO Decoder Input driver"
+	depends on GPIOLIB || COMPILE_TEST
+	select INPUT_POLLDEV
+	help
+	 Say Y here if you want driver to read status of multiple GPIO
+	 lines and report the encoded value as an absolute integer to
+	 input subsystem.
+
+	 To compile this driver as a module, choose M here: the module
+	 will be called gpio_decoder.
+
+config INPUT_IXP4XX_BEEPER
+	tristate "IXP4XX Beeper support"
+	depends on ARCH_IXP4XX
+	help
+	  If you say yes here, you can connect a beeper to the
+	  ixp4xx gpio pins. This is used by the LinkSys NSLU2.
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ixp4xx-beeper.
+
+config INPUT_COBALT_BTNS
+	tristate "Cobalt button interface"
+	depends on MIPS_COBALT
+	select INPUT_POLLDEV
+	help
+	  Say Y here if you want to support MIPS Cobalt button interface.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cobalt_btns.
+
+config INPUT_CPCAP_PWRBUTTON
+	tristate "CPCAP OnKey"
+	depends on MFD_CPCAP
+	help
+	  Say Y here if you want to enable power key reporting via the
+	  Motorola CPCAP chip.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called cpcap-pwrbutton.
+
+config INPUT_WISTRON_BTNS
+	tristate "x86 Wistron laptop button interface"
+	depends on X86_32
+	select INPUT_POLLDEV
+	select INPUT_SPARSEKMAP
+	select NEW_LEDS
+	select LEDS_CLASS
+	select CHECK_SIGNATURE
+	help
+	  Say Y here for support of Wistron laptop button interfaces, used on
+	  laptops of various brands, including Acer and Fujitsu-Siemens. If
+	  available, mail and wifi LEDs will be controllable via /sys/class/leds.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called wistron_btns.
+
+config INPUT_ATLAS_BTNS
+	tristate "x86 Atlas button interface"
+	depends on X86 && ACPI
+	help
+	  Say Y here for support of Atlas wallmount touchscreen buttons.
+	  The events will show up as scancodes F1 through F9 via evdev.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called atlas_btns.
+
+config INPUT_ATI_REMOTE2
+	tristate "ATI / Philips USB RF remote control"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you want to use an ATI or Philips USB RF remote control.
+	  These are RF remotes with USB receivers.
+	  ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
+	  and is also available as a separate product.
+	  This driver provides mouse pointer, left and right mouse buttons,
+	  and maps all the other remote buttons to keypress events.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ati_remote2.
+
+config INPUT_KEYSPAN_REMOTE
+	tristate "Keyspan DMR USB remote control"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you want to use a Keyspan DMR USB remote control.
+	  Currently only the UIA-11 type of receiver has been tested.  The tag
+	  on the receiver that connects to the USB port should have a P/N that
+	  will tell you what type of DMR you have.  The UIA-10 type is not
+	  supported at this time.  This driver maps all buttons to keypress
+	  events.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called keyspan_remote.
+
+config INPUT_KXTJ9
+	tristate "Kionix KXTJ9 tri-axis digital accelerometer"
+	depends on I2C
+	help
+	  Say Y here to enable support for the Kionix KXTJ9 digital tri-axis
+	  accelerometer.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called kxtj9.
+
+config INPUT_KXTJ9_POLLED_MODE
+	bool "Enable polling mode support"
+	depends on INPUT_KXTJ9
+	select INPUT_POLLDEV
+	help
+	  Say Y here if you need accelerometer to work in polling mode.
+
+config INPUT_POWERMATE
+	tristate "Griffin PowerMate and Contour Jog support"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
+	  These are aluminum dials which can measure clockwise and anticlockwise
+	  rotation.  The dial also acts as a pushbutton.  The base contains an LED
+	  which can be instructed to pulse or to switch to a particular intensity.
+
+	  You can download userspace tools from
+	  <http://sowerbutts.com/powermate/>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called powermate.
+
+config INPUT_YEALINK
+	tristate "Yealink usb-p1k voip phone"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you want to enable keyboard and LCD functions of the
+	  Yealink usb-p1k usb phones. The audio part is enabled by the generic
+	  usb sound driver, so you might want to enable that as well.
+
+	  For information about how to use these additional functions, see
+	  <file:Documentation/input/devices/yealink.rst>.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called yealink.
+
+config INPUT_CM109
+	tristate "C-Media CM109 USB I/O Controller"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you want to enable keyboard and buzzer functions of the
+	  C-Media CM109 usb phones. The audio part is enabled by the generic
+	  usb sound driver, so you might want to enable that as well.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called cm109.
+
+config INPUT_REGULATOR_HAPTIC
+	tristate "Regulator haptics support"
+	depends on REGULATOR
+	select INPUT_FF_MEMLESS
+	help
+	  This option enables device driver support for the haptic controlled
+	  by a regulator. This driver supports ff-memless interface
+	  from input framework.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called regulator-haptic.
+
+config INPUT_RETU_PWRBUTTON
+	tristate "Retu Power button Driver"
+	depends on MFD_RETU
+	help
+	  Say Y here if you want to enable power key reporting via the
+	  Retu chips found in Nokia Internet Tablets (770, N800, N810).
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called retu-pwrbutton.
+
+config INPUT_TPS65218_PWRBUTTON
+	tristate "TPS65218 Power button driver"
+	depends on (MFD_TPS65217 || MFD_TPS65218)
+	help
+	  Say Y here if you want to enable power button reporting for
+	  TPS65217 and TPS65218 Power Management IC devices.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called tps65218-pwrbutton.
+
+config INPUT_AXP20X_PEK
+	tristate "X-Powers AXP20X power button driver"
+	depends on MFD_AXP20X
+	help
+	  Say Y here if you want to enable power key reporting via the
+	  AXP20X PMIC.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called axp20x-pek.
+
+
+config INPUT_TWL4030_PWRBUTTON
+	tristate "TWL4030 Power button Driver"
+	depends on TWL4030_CORE
+	help
+	  Say Y here if you want to enable power key reporting via the
+	  TWL4030 family of chips.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called twl4030_pwrbutton.
+
+config INPUT_TWL4030_VIBRA
+	tristate "Support for TWL4030 Vibrator"
+	depends on TWL4030_CORE
+	select MFD_TWL4030_AUDIO
+	select INPUT_FF_MEMLESS
+	help
+	  This option enables support for TWL4030 Vibrator Driver.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called twl4030_vibra.
+
+config INPUT_TWL6040_VIBRA
+	tristate "Support for TWL6040 Vibrator"
+	depends on TWL6040_CORE
+	select INPUT_FF_MEMLESS
+	help
+	  This option enables support for TWL6040 Vibrator Driver.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called twl6040_vibra.
+
+config INPUT_UINPUT
+	tristate "User level driver support"
+	help
+	  Say Y here if you want to support user level drivers for input
+	  subsystem accessible under char device 10:223 - /dev/input/uinput.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called uinput.
+
+config INPUT_SGI_BTNS
+	tristate "SGI Indy/O2 volume button interface"
+	depends on SGI_IP22 || SGI_IP32
+	select INPUT_POLLDEV
+	help
+	  Say Y here if you want to support SGI Indy/O2 volume button interface.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sgi_btns.
+
+config HP_SDC_RTC
+	tristate "HP SDC Real Time Clock"
+	depends on (GSC || HP300) && SERIO
+	select HP_SDC
+	help
+	  Say Y here if you want to support the built-in real time clock
+	  of the HP SDC controller.
+
+config INPUT_PALMAS_PWRBUTTON
+	tristate "Palmas Power button Driver"
+	depends on MFD_PALMAS
+	help
+	  Say Y here if you want to enable power key reporting via the
+	  Palmas family of PMICs.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called palmas_pwrbutton.
+
+config INPUT_PCF50633_PMU
+	tristate "PCF50633 PMU events"
+	depends on MFD_PCF50633
+	help
+	 Say Y to include support for delivering  PMU events via  input
+	 layer on NXP PCF50633.
+
+config INPUT_PCF8574
+	tristate "PCF8574 Keypad input device"
+	depends on I2C
+	help
+	  Say Y here if you want to support a keypad connected via I2C
+	  with a PCF8574.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcf8574_keypad.
+
+config INPUT_PWM_BEEPER
+	tristate "PWM beeper support"
+	depends on PWM
+	help
+	  Say Y here to get support for PWM based beeper devices.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called pwm-beeper.
+
+config INPUT_PWM_VIBRA
+	tristate "PWM vibrator support"
+	depends on PWM
+	select INPUT_FF_MEMLESS
+	help
+	  Say Y here to get support for PWM based vibrator devices.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called pwm-vibra.
+
+config INPUT_RK805_PWRKEY
+	tristate "Rockchip RK805 PMIC power key support"
+	depends on MFD_RK808
+	help
+	  Select this option to enable power key driver for RK805.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called rk805_pwrkey.
+
+config INPUT_GPIO_ROTARY_ENCODER
+	tristate "Rotary encoders connected to GPIO pins"
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  Say Y here to add support for rotary encoders connected to GPIO lines.
+	  Check file:Documentation/input/devices/rotary-encoder.rst for more
+	  information.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rotary_encoder.
+
+config INPUT_RB532_BUTTON
+	tristate "Mikrotik Routerboard 532 button interface"
+	depends on MIKROTIK_RB532
+	depends on GPIOLIB
+	select INPUT_POLLDEV
+	help
+	  Say Y here if you want support for the S1 button built into
+	  Mikrotik's Routerboard 532.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rb532_button.
+
+config INPUT_DA9052_ONKEY
+	tristate "Dialog DA9052/DA9053 Onkey"
+	depends on PMIC_DA9052
+	help
+	  Support the ONKEY of Dialog DA9052 PMICs as an input device
+	  reporting power button status.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called da9052_onkey.
+
+config INPUT_DA9055_ONKEY
+	tristate "Dialog Semiconductor DA9055 ONKEY"
+	depends on MFD_DA9055
+	help
+	  Support the ONKEY of DA9055 PMICs as an input device
+	  reporting power button status.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called da9055_onkey.
+
+config INPUT_DA9063_ONKEY
+	tristate "Dialog DA9063/62/61 OnKey"
+	depends on MFD_DA9063 || MFD_DA9062
+	help
+	  Support the ONKEY of Dialog DA9063, DA9062 and DA9061 Power
+	  Management ICs as an input device capable of reporting the
+	  power button status.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called da9063_onkey.
+
+config INPUT_DM355EVM
+	tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
+	depends on MFD_DM355EVM_MSP
+	select INPUT_SPARSEKMAP
+	help
+	  Supports the pushbuttons and IR remote used with
+	  the DM355 EVM board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called dm355evm_keys.
+
+config INPUT_WM831X_ON
+	tristate "WM831X ON pin"
+	depends on MFD_WM831X
+	help
+	  Support the ON pin of WM831X PMICs as an input device
+	  reporting power button status.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called wm831x_on.
+
+config INPUT_PCAP
+	tristate "Motorola EZX PCAP misc input events"
+	depends on EZX_PCAP
+	help
+	  Say Y here if you want to use Power key and Headphone button
+	  on Motorola EZX phones.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcap_keys.
+
+config INPUT_ADXL34X
+	tristate "Analog Devices ADXL34x Three-Axis Digital Accelerometer"
+	default n
+	help
+	  Say Y here if you have a Accelerometer interface using the
+	  ADXL345/6 controller, and your board-specific initialization
+	  code includes that in its table of devices.
+
+	  This driver can use either I2C or SPI communication to the
+	  ADXL345/6 controller.  Select the appropriate method for
+	  your system.
+
+	  If unsure, say N (but it's safe to say "Y").
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adxl34x.
+
+config INPUT_ADXL34X_I2C
+	tristate "support I2C bus connection"
+	depends on INPUT_ADXL34X && I2C
+	default y
+	help
+	  Say Y here if you have ADXL345/6 hooked to an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adxl34x-i2c.
+
+config INPUT_ADXL34X_SPI
+	tristate "support SPI bus connection"
+	depends on INPUT_ADXL34X && SPI
+	default y
+	help
+	  Say Y here if you have ADXL345/6 hooked to a SPI bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adxl34x-spi.
+
+config INPUT_IMS_PCU
+	tristate "IMS Passenger Control Unit driver"
+	depends on USB
+	depends on LEDS_CLASS
+	help
+	  Say Y here if you have system with IMS Rave Passenger Control Unit.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ims_pcu.
+
+config INPUT_CMA3000
+	tristate "VTI CMA3000 Tri-axis accelerometer"
+	help
+	  Say Y here if you want to use VTI CMA3000_D0x Accelerometer
+	  driver
+
+	  This driver currently only supports I2C interface to the
+	  controller. Also select the I2C method.
+
+	  If unsure, say N
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cma3000_d0x.
+
+config INPUT_CMA3000_I2C
+	tristate "Support I2C bus connection"
+	depends on INPUT_CMA3000 && I2C
+	help
+	  Say Y here if you want to use VTI CMA3000_D0x Accelerometer
+	  through I2C interface.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cma3000_d0x_i2c.
+
+config INPUT_XEN_KBDDEV_FRONTEND
+	tristate "Xen virtual keyboard and mouse support"
+	depends on XEN
+	default y
+	select XEN_XENBUS_FRONTEND
+	help
+	  This driver implements the front-end of the Xen virtual
+	  keyboard and mouse device driver.  It communicates with a back-end
+	  in another domain.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called xen-kbdfront.
+
+config INPUT_SIRFSOC_ONKEY
+	tristate "CSR SiRFSoC power on/off/suspend key support"
+	depends on ARCH_SIRF && OF
+	default y
+	help
+	  Say Y here if you want to support for the SiRFSoC power on/off/suspend key
+	  in Linux, after you press the onkey, system will suspend.
+
+	  If unsure, say N.
+
+config INPUT_IDEAPAD_SLIDEBAR
+	tristate "IdeaPad Laptop Slidebar"
+	depends on INPUT
+	depends on SERIO_I8042
+	help
+	  Say Y here if you have an IdeaPad laptop with a slidebar.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ideapad_slidebar.
+
+config INPUT_SOC_BUTTON_ARRAY
+	tristate "Windows-compatible SoC Button Array"
+	depends on KEYBOARD_GPIO
+	help
+	  Say Y here if you have a SoC-based tablet that originally
+	  runs Windows 8.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called soc_button_array.
+
+config INPUT_DRV260X_HAPTICS
+	tristate "TI DRV260X haptics support"
+	depends on INPUT && I2C
+	depends on GPIOLIB || COMPILE_TEST
+	select INPUT_FF_MEMLESS
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for the TI DRV260X haptics driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called drv260x-haptics.
+
+config INPUT_DRV2665_HAPTICS
+	tristate "TI DRV2665 haptics support"
+	depends on INPUT && I2C
+	select INPUT_FF_MEMLESS
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for the TI DRV2665 haptics driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called drv2665-haptics.
+
+config INPUT_DRV2667_HAPTICS
+	tristate "TI DRV2667 haptics support"
+	depends on INPUT && I2C
+	select INPUT_FF_MEMLESS
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for the TI DRV2667 haptics driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called drv2667-haptics.
+
+config INPUT_HISI_POWERKEY
+	tristate "Hisilicon PMIC ONKEY support"
+	depends on ARCH_HISI || COMPILE_TEST
+	help
+	  Say Y to enable support for PMIC ONKEY.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hisi_powerkey.
+
+config INPUT_RAVE_SP_PWRBUTTON
+	tristate "RAVE SP Power button Driver"
+	depends on RAVE_SP_CORE
+	help
+	  Say Y here if you want to enable power key reporting from RAVE SP
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rave-sp-pwrbutton.
+
+config INPUT_SC27XX_VIBRA
+	tristate "Spreadtrum sc27xx vibrator support"
+	depends on MFD_SC27XX_PMIC || COMPILE_TEST
+	select INPUT_FF_MEMLESS
+	help
+	  This option enables support for Spreadtrum sc27xx vibrator driver.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called sc27xx_vibra.
+
+endif