Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 445 insertions, 0 deletions

diff --git a/drivers/isdn/hysdn/boardergo.c b/drivers/isdn/hysdn/boardergo.c
new file mode 100644
index 000000000..2aa2a0e08
--- /dev/null
+++ b/drivers/isdn/hysdn/boardergo.c
@@ -0,0 +1,445 @@
+/* $Id: boardergo.c,v 1.5.6.7 2001/11/06 21:58:19 kai Exp $
+ *
+ * Linux driver for HYSDN cards, specific routines for ergo type boards.
+ *
+ * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
+ * Copyright 1999 by Werner Cornelius (werner@titro.de)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ * As all Linux supported cards Champ2, Ergo and Metro2/4 use the same
+ * DPRAM interface and layout with only minor differences all related
+ * stuff is done here, not in separate modules.
+ *
+ */
+
+#include <linux/signal.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#include "hysdn_defs.h"
+#include "boardergo.h"
+
+#define byteout(addr, val) outb(val, addr)
+#define bytein(addr) inb(addr)
+
+/***************************************************/
+/* The cards interrupt handler. Called from system */
+/***************************************************/
+static irqreturn_t
+ergo_interrupt(int intno, void *dev_id)
+{
+	hysdn_card *card = dev_id;	/* parameter from irq */
+	tErgDpram *dpr;
+	unsigned long flags;
+	unsigned char volatile b;
+
+	if (!card)
+		return IRQ_NONE;		/* error -> spurious interrupt */
+	if (!card->irq_enabled)
+		return IRQ_NONE;		/* other device interrupting or irq switched off */
+
+	spin_lock_irqsave(&card->hysdn_lock, flags); /* no further irqs allowed */
+
+	if (!(bytein(card->iobase + PCI9050_INTR_REG) & PCI9050_INTR_REG_STAT1)) {
+		spin_unlock_irqrestore(&card->hysdn_lock, flags);	/* restore old state */
+		return IRQ_NONE;		/* no interrupt requested by E1 */
+	}
+	/* clear any pending ints on the board */
+	dpr = card->dpram;
+	b = dpr->ToPcInt;	/* clear for ergo */
+	b |= dpr->ToPcIntMetro;	/* same for metro */
+	b |= dpr->ToHyInt;	/* and for champ */
+
+	/* start kernel task immediately after leaving all interrupts */
+	if (!card->hw_lock)
+		schedule_work(&card->irq_queue);
+	spin_unlock_irqrestore(&card->hysdn_lock, flags);
+	return IRQ_HANDLED;
+}				/* ergo_interrupt */
+
+/******************************************************************************/
+/* ergo_irq_bh will be called as part of the kernel clearing its shared work  */
+/* queue sometime after a call to schedule_work has been made passing our     */
+/* work_struct. This task is the only one handling data transfer from or to   */
+/* the card after booting. The task may be queued from everywhere             */
+/* (interrupts included).                                                     */
+/******************************************************************************/
+static void
+ergo_irq_bh(struct work_struct *ugli_api)
+{
+	hysdn_card *card = container_of(ugli_api, hysdn_card, irq_queue);
+	tErgDpram *dpr;
+	int again;
+	unsigned long flags;
+
+	if (card->state != CARD_STATE_RUN)
+		return;		/* invalid call */
+
+	dpr = card->dpram;	/* point to DPRAM */
+
+	spin_lock_irqsave(&card->hysdn_lock, flags);
+	if (card->hw_lock) {
+		spin_unlock_irqrestore(&card->hysdn_lock, flags);	/* hardware currently unavailable */
+		return;
+	}
+	card->hw_lock = 1;	/* we now lock the hardware */
+
+	do {
+		again = 0;	/* assume loop not to be repeated */
+
+		if (!dpr->ToHyFlag) {
+			/* we are able to send a buffer */
+
+			if (hysdn_sched_tx(card, dpr->ToHyBuf, &dpr->ToHySize, &dpr->ToHyChannel,
+					   ERG_TO_HY_BUF_SIZE)) {
+				dpr->ToHyFlag = 1;	/* enable tx */
+				again = 1;	/* restart loop */
+			}
+		}		/* we are able to send a buffer */
+		if (dpr->ToPcFlag) {
+			/* a message has arrived for us, handle it */
+
+			if (hysdn_sched_rx(card, dpr->ToPcBuf, dpr->ToPcSize, dpr->ToPcChannel)) {
+				dpr->ToPcFlag = 0;	/* we worked the data */
+				again = 1;	/* restart loop */
+			}
+		}		/* a message has arrived for us */
+		if (again) {
+			dpr->ToHyInt = 1;
+			dpr->ToPcInt = 1;	/* interrupt to E1 for all cards */
+		} else
+			card->hw_lock = 0;	/* free hardware again */
+	} while (again);	/* until nothing more to do */
+
+	spin_unlock_irqrestore(&card->hysdn_lock, flags);
+}				/* ergo_irq_bh */
+
+
+/*********************************************************/
+/* stop the card (hardware reset) and disable interrupts */
+/*********************************************************/
+static void
+ergo_stopcard(hysdn_card *card)
+{
+	unsigned long flags;
+	unsigned char val;
+
+	hysdn_net_release(card);	/* first release the net device if existing */
+#ifdef CONFIG_HYSDN_CAPI
+	hycapi_capi_stop(card);
+#endif /* CONFIG_HYSDN_CAPI */
+	spin_lock_irqsave(&card->hysdn_lock, flags);
+	val = bytein(card->iobase + PCI9050_INTR_REG);	/* get actual value */
+	val &= ~(PCI9050_INTR_REG_ENPCI | PCI9050_INTR_REG_EN1);	/* mask irq */
+	byteout(card->iobase + PCI9050_INTR_REG, val);
+	card->irq_enabled = 0;
+	byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RESET);	/* reset E1 processor */
+	card->state = CARD_STATE_UNUSED;
+	card->err_log_state = ERRLOG_STATE_OFF;		/* currently no log active */
+
+	spin_unlock_irqrestore(&card->hysdn_lock, flags);
+}				/* ergo_stopcard */
+
+/**************************************************************************/
+/* enable or disable the cards error log. The event is queued if possible */
+/**************************************************************************/
+static void
+ergo_set_errlog_state(hysdn_card *card, int on)
+{
+	unsigned long flags;
+
+	if (card->state != CARD_STATE_RUN) {
+		card->err_log_state = ERRLOG_STATE_OFF;		/* must be off */
+		return;
+	}
+	spin_lock_irqsave(&card->hysdn_lock, flags);
+
+	if (((card->err_log_state == ERRLOG_STATE_OFF) && !on) ||
+	    ((card->err_log_state == ERRLOG_STATE_ON) && on)) {
+		spin_unlock_irqrestore(&card->hysdn_lock, flags);
+		return;		/* nothing to do */
+	}
+	if (on)
+		card->err_log_state = ERRLOG_STATE_START;	/* request start */
+	else
+		card->err_log_state = ERRLOG_STATE_STOP;	/* request stop */
+
+	spin_unlock_irqrestore(&card->hysdn_lock, flags);
+	schedule_work(&card->irq_queue);
+}				/* ergo_set_errlog_state */
+
+/******************************************/
+/* test the cards RAM and return 0 if ok. */
+/******************************************/
+static const char TestText[36] = "This Message is filler, why read it";
+
+static int
+ergo_testram(hysdn_card *card)
+{
+	tErgDpram *dpr = card->dpram;
+
+	memset(dpr->TrapTable, 0, sizeof(dpr->TrapTable));	/* clear all Traps */
+	dpr->ToHyInt = 1;	/* E1 INTR state forced */
+
+	memcpy(&dpr->ToHyBuf[ERG_TO_HY_BUF_SIZE - sizeof(TestText)], TestText,
+	       sizeof(TestText));
+	if (memcmp(&dpr->ToHyBuf[ERG_TO_HY_BUF_SIZE - sizeof(TestText)], TestText,
+		   sizeof(TestText)))
+		return (-1);
+
+	memcpy(&dpr->ToPcBuf[ERG_TO_PC_BUF_SIZE - sizeof(TestText)], TestText,
+	       sizeof(TestText));
+	if (memcmp(&dpr->ToPcBuf[ERG_TO_PC_BUF_SIZE - sizeof(TestText)], TestText,
+		   sizeof(TestText)))
+		return (-1);
+
+	return (0);
+}				/* ergo_testram */
+
+/*****************************************************************************/
+/* this function is intended to write stage 1 boot image to the cards buffer */
+/* this is done in two steps. First the 1024 hi-words are written (offs=0),  */
+/* then the 1024 lo-bytes are written. The remaining DPRAM is cleared, the   */
+/* PCI-write-buffers flushed and the card is taken out of reset.             */
+/* The function then waits for a reaction of the E1 processor or a timeout.  */
+/* Negative return values are interpreted as errors.                         */
+/*****************************************************************************/
+static int
+ergo_writebootimg(struct HYSDN_CARD *card, unsigned char *buf,
+		  unsigned long offs)
+{
+	unsigned char *dst;
+	tErgDpram *dpram;
+	int cnt = (BOOT_IMG_SIZE >> 2);		/* number of words to move and swap (byte order!) */
+
+	if (card->debug_flags & LOG_POF_CARD)
+		hysdn_addlog(card, "ERGO: write bootldr offs=0x%lx ", offs);
+
+	dst = card->dpram;	/* pointer to start of DPRAM */
+	dst += (offs + ERG_DPRAM_FILL_SIZE);	/* offset in the DPRAM */
+	while (cnt--) {
+		*dst++ = *(buf + 1);	/* high byte */
+		*dst++ = *buf;	/* low byte */
+		dst += 2;	/* point to next longword */
+		buf += 2;	/* buffer only filled with words */
+	}
+
+	/* if low words (offs = 2) have been written, clear the rest of the DPRAM, */
+	/* flush the PCI-write-buffer and take the E1 out of reset */
+	if (offs) {
+		memset(card->dpram, 0, ERG_DPRAM_FILL_SIZE);	/* fill the DPRAM still not cleared */
+		dpram = card->dpram;	/* get pointer to dpram structure */
+		dpram->ToHyNoDpramErrLog = 0xFF;	/* write a dpram register */
+		while (!dpram->ToHyNoDpramErrLog);	/* reread volatile register to flush PCI */
+
+		byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RUN);	/* start E1 processor */
+		/* the interrupts are still masked */
+
+		msleep_interruptible(20);		/* Timeout 20ms */
+
+		if (((tDpramBootSpooler *) card->dpram)->Len != DPRAM_SPOOLER_DATA_SIZE) {
+			if (card->debug_flags & LOG_POF_CARD)
+				hysdn_addlog(card, "ERGO: write bootldr no answer");
+			return (-ERR_BOOTIMG_FAIL);
+		}
+	}			/* start_boot_img */
+	return (0);		/* successful */
+}				/* ergo_writebootimg */
+
+/********************************************************************************/
+/* ergo_writebootseq writes the buffer containing len bytes to the E1 processor */
+/* using the boot spool mechanism. If everything works fine 0 is returned. In   */
+/* case of errors a negative error value is returned.                           */
+/********************************************************************************/
+static int
+ergo_writebootseq(struct HYSDN_CARD *card, unsigned char *buf, int len)
+{
+	tDpramBootSpooler *sp = (tDpramBootSpooler *) card->dpram;
+	unsigned char *dst;
+	unsigned char buflen;
+	int nr_write;
+	unsigned char tmp_rdptr;
+	unsigned char wr_mirror;
+	int i;
+
+	if (card->debug_flags & LOG_POF_CARD)
+		hysdn_addlog(card, "ERGO: write boot seq len=%d ", len);
+
+	dst = sp->Data;		/* point to data in spool structure */
+	buflen = sp->Len;	/* maximum len of spooled data */
+	wr_mirror = sp->WrPtr;	/* only once read */
+
+	/* try until all bytes written or error */
+	i = 0x1000;		/* timeout value */
+	while (len) {
+
+		/* first determine the number of bytes that may be buffered */
+		do {
+			tmp_rdptr = sp->RdPtr;	/* first read the pointer */
+			i--;	/* decrement timeout */
+		} while (i && (tmp_rdptr != sp->RdPtr));	/* wait for stable pointer */
+
+		if (!i) {
+			if (card->debug_flags & LOG_POF_CARD)
+				hysdn_addlog(card, "ERGO: write boot seq timeout");
+			return (-ERR_BOOTSEQ_FAIL);	/* value not stable -> timeout */
+		}
+		if ((nr_write = tmp_rdptr - wr_mirror - 1) < 0)
+			nr_write += buflen;	/* now we got number of free bytes - 1 in buffer */
+
+		if (!nr_write)
+			continue;	/* no free bytes in buffer */
+
+		if (nr_write > len)
+			nr_write = len;		/* limit if last few bytes */
+		i = 0x1000;	/* reset timeout value */
+
+		/* now we know how much bytes we may put in the puffer */
+		len -= nr_write;	/* we savely could adjust len before output */
+		while (nr_write--) {
+			*(dst + wr_mirror) = *buf++;	/* output one byte */
+			if (++wr_mirror >= buflen)
+				wr_mirror = 0;
+			sp->WrPtr = wr_mirror;	/* announce the next byte to E1 */
+		}		/* while (nr_write) */
+
+	}			/* while (len) */
+	return (0);
+}				/* ergo_writebootseq */
+
+/***********************************************************************************/
+/* ergo_waitpofready waits for a maximum of 10 seconds for the completition of the */
+/* boot process. If the process has been successful 0 is returned otherwise a     */
+/* negative error code is returned.                                                */
+/***********************************************************************************/
+static int
+ergo_waitpofready(struct HYSDN_CARD *card)
+{
+	tErgDpram *dpr = card->dpram;	/* pointer to DPRAM structure */
+	int timecnt = 10000 / 50;	/* timeout is 10 secs max. */
+	unsigned long flags;
+	int msg_size;
+	int i;
+
+	if (card->debug_flags & LOG_POF_CARD)
+		hysdn_addlog(card, "ERGO: waiting for pof ready");
+	while (timecnt--) {
+		/* wait until timeout  */
+
+		if (dpr->ToPcFlag) {
+			/* data has arrived */
+
+			if ((dpr->ToPcChannel != CHAN_SYSTEM) ||
+			    (dpr->ToPcSize < MIN_RDY_MSG_SIZE) ||
+			    (dpr->ToPcSize > MAX_RDY_MSG_SIZE) ||
+			    ((*(unsigned long *) dpr->ToPcBuf) != RDY_MAGIC))
+				break;	/* an error occurred */
+
+			/* Check for additional data delivered during SysReady */
+			msg_size = dpr->ToPcSize - RDY_MAGIC_SIZE;
+			if (msg_size > 0)
+				if (EvalSysrTokData(card, dpr->ToPcBuf + RDY_MAGIC_SIZE, msg_size))
+					break;
+
+			if (card->debug_flags & LOG_POF_RECORD)
+				hysdn_addlog(card, "ERGO: pof boot success");
+			spin_lock_irqsave(&card->hysdn_lock, flags);
+
+			card->state = CARD_STATE_RUN;	/* now card is running */
+			/* enable the cards interrupt */
+			byteout(card->iobase + PCI9050_INTR_REG,
+				bytein(card->iobase + PCI9050_INTR_REG) |
+				(PCI9050_INTR_REG_ENPCI | PCI9050_INTR_REG_EN1));
+			card->irq_enabled = 1;	/* we are ready to receive interrupts */
+
+			dpr->ToPcFlag = 0;	/* reset data indicator */
+			dpr->ToHyInt = 1;
+			dpr->ToPcInt = 1;	/* interrupt to E1 for all cards */
+
+			spin_unlock_irqrestore(&card->hysdn_lock, flags);
+			if ((hynet_enable & (1 << card->myid))
+			    && (i = hysdn_net_create(card)))
+			{
+				ergo_stopcard(card);
+				card->state = CARD_STATE_BOOTERR;
+				return (i);
+			}
+#ifdef CONFIG_HYSDN_CAPI
+			if ((i = hycapi_capi_create(card))) {
+				printk(KERN_WARNING "HYSDN: failed to create capi-interface.\n");
+			}
+#endif /* CONFIG_HYSDN_CAPI */
+			return (0);	/* success */
+		}		/* data has arrived */
+		msleep_interruptible(50);		/* Timeout 50ms */
+	}			/* wait until timeout */
+
+	if (card->debug_flags & LOG_POF_CARD)
+		hysdn_addlog(card, "ERGO: pof boot ready timeout");
+	return (-ERR_POF_TIMEOUT);
+}				/* ergo_waitpofready */
+
+
+
+/************************************************************************************/
+/* release the cards hardware. Before releasing do a interrupt disable and hardware */
+/* reset. Also unmap dpram.                                                         */
+/* Use only during module release.                                                  */
+/************************************************************************************/
+static void
+ergo_releasehardware(hysdn_card *card)
+{
+	ergo_stopcard(card);	/* first stop the card if not already done */
+	free_irq(card->irq, card);	/* release interrupt */
+	release_region(card->iobase + PCI9050_INTR_REG, 1);	/* release all io ports */
+	release_region(card->iobase + PCI9050_USER_IO, 1);
+	iounmap(card->dpram);
+	card->dpram = NULL;	/* release shared mem */
+}				/* ergo_releasehardware */
+
+
+/*********************************************************************************/
+/* acquire the needed hardware ports and map dpram. If an error occurs a nonzero */
+/* value is returned.                                                            */
+/* Use only during module init.                                                  */
+/*********************************************************************************/
+int
+ergo_inithardware(hysdn_card *card)
+{
+	if (!request_region(card->iobase + PCI9050_INTR_REG, 1, "HYSDN"))
+		return (-1);
+	if (!request_region(card->iobase + PCI9050_USER_IO, 1, "HYSDN")) {
+		release_region(card->iobase + PCI9050_INTR_REG, 1);
+		return (-1);	/* ports already in use */
+	}
+	card->memend = card->membase + ERG_DPRAM_PAGE_SIZE - 1;
+	if (!(card->dpram = ioremap(card->membase, ERG_DPRAM_PAGE_SIZE))) {
+		release_region(card->iobase + PCI9050_INTR_REG, 1);
+		release_region(card->iobase + PCI9050_USER_IO, 1);
+		return (-1);
+	}
+
+	ergo_stopcard(card);	/* disable interrupts */
+	if (request_irq(card->irq, ergo_interrupt, IRQF_SHARED, "HYSDN", card)) {
+		ergo_releasehardware(card); /* return the acquired hardware */
+		return (-1);
+	}
+	/* success, now setup the function pointers */
+	card->stopcard = ergo_stopcard;
+	card->releasehardware = ergo_releasehardware;
+	card->testram = ergo_testram;
+	card->writebootimg = ergo_writebootimg;
+	card->writebootseq = ergo_writebootseq;
+	card->waitpofready = ergo_waitpofready;
+	card->set_errlog_state = ergo_set_errlog_state;
+	INIT_WORK(&card->irq_queue, ergo_irq_bh);
+	spin_lock_init(&card->hysdn_lock);
+
+	return (0);
+}				/* ergo_inithardware */