Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2130 insertions, 0 deletions

diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c
new file mode 100644
index 000000000..a42043379
--- /dev/null
+++ b/drivers/media/cec/cec-adap.c
@@ -0,0 +1,2130 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * cec-adap.c - HDMI Consumer Electronics Control framework - CEC adapter
+ *
+ * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/kmod.h>
+#include <linux/ktime.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <drm/drm_edid.h>
+
+#include "cec-priv.h"
+
+static void cec_fill_msg_report_features(struct cec_adapter *adap,
+					 struct cec_msg *msg,
+					 unsigned int la_idx);
+
+/*
+ * 400 ms is the time it takes for one 16 byte message to be
+ * transferred and 5 is the maximum number of retries. Add
+ * another 100 ms as a margin. So if the transmit doesn't
+ * finish before that time something is really wrong and we
+ * have to time out.
+ *
+ * This is a sign that something it really wrong and a warning
+ * will be issued.
+ */
+#define CEC_XFER_TIMEOUT_MS (5 * 400 + 100)
+
+#define call_op(adap, op, arg...) \
+	(adap->ops->op ? adap->ops->op(adap, ## arg) : 0)
+
+#define call_void_op(adap, op, arg...)			\
+	do {						\
+		if (adap->ops->op)			\
+			adap->ops->op(adap, ## arg);	\
+	} while (0)
+
+static int cec_log_addr2idx(const struct cec_adapter *adap, u8 log_addr)
+{
+	int i;
+
+	for (i = 0; i < adap->log_addrs.num_log_addrs; i++)
+		if (adap->log_addrs.log_addr[i] == log_addr)
+			return i;
+	return -1;
+}
+
+static unsigned int cec_log_addr2dev(const struct cec_adapter *adap, u8 log_addr)
+{
+	int i = cec_log_addr2idx(adap, log_addr);
+
+	return adap->log_addrs.primary_device_type[i < 0 ? 0 : i];
+}
+
+u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size,
+			   unsigned int *offset)
+{
+	unsigned int loc = cec_get_edid_spa_location(edid, size);
+
+	if (offset)
+		*offset = loc;
+	if (loc == 0)
+		return CEC_PHYS_ADDR_INVALID;
+	return (edid[loc] << 8) | edid[loc + 1];
+}
+EXPORT_SYMBOL_GPL(cec_get_edid_phys_addr);
+
+/*
+ * Queue a new event for this filehandle. If ts == 0, then set it
+ * to the current time.
+ *
+ * We keep a queue of at most max_event events where max_event differs
+ * per event. If the queue becomes full, then drop the oldest event and
+ * keep track of how many events we've dropped.
+ */
+void cec_queue_event_fh(struct cec_fh *fh,
+			const struct cec_event *new_ev, u64 ts)
+{
+	static const u16 max_events[CEC_NUM_EVENTS] = {
+		1, 1, 800, 800, 8, 8, 8, 8
+	};
+	struct cec_event_entry *entry;
+	unsigned int ev_idx = new_ev->event - 1;
+
+	if (WARN_ON(ev_idx >= ARRAY_SIZE(fh->events)))
+		return;
+
+	if (ts == 0)
+		ts = ktime_get_ns();
+
+	mutex_lock(&fh->lock);
+	if (ev_idx < CEC_NUM_CORE_EVENTS)
+		entry = &fh->core_events[ev_idx];
+	else
+		entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (entry) {
+		if (new_ev->event == CEC_EVENT_LOST_MSGS &&
+		    fh->queued_events[ev_idx]) {
+			entry->ev.lost_msgs.lost_msgs +=
+				new_ev->lost_msgs.lost_msgs;
+			goto unlock;
+		}
+		entry->ev = *new_ev;
+		entry->ev.ts = ts;
+
+		if (fh->queued_events[ev_idx] < max_events[ev_idx]) {
+			/* Add new msg at the end of the queue */
+			list_add_tail(&entry->list, &fh->events[ev_idx]);
+			fh->queued_events[ev_idx]++;
+			fh->total_queued_events++;
+			goto unlock;
+		}
+
+		if (ev_idx >= CEC_NUM_CORE_EVENTS) {
+			list_add_tail(&entry->list, &fh->events[ev_idx]);
+			/* drop the oldest event */
+			entry = list_first_entry(&fh->events[ev_idx],
+						 struct cec_event_entry, list);
+			list_del(&entry->list);
+			kfree(entry);
+		}
+	}
+	/* Mark that events were lost */
+	entry = list_first_entry_or_null(&fh->events[ev_idx],
+					 struct cec_event_entry, list);
+	if (entry)
+		entry->ev.flags |= CEC_EVENT_FL_DROPPED_EVENTS;
+
+unlock:
+	mutex_unlock(&fh->lock);
+	wake_up_interruptible(&fh->wait);
+}
+
+/* Queue a new event for all open filehandles. */
+static void cec_queue_event(struct cec_adapter *adap,
+			    const struct cec_event *ev)
+{
+	u64 ts = ktime_get_ns();
+	struct cec_fh *fh;
+
+	mutex_lock(&adap->devnode.lock);
+	list_for_each_entry(fh, &adap->devnode.fhs, list)
+		cec_queue_event_fh(fh, ev, ts);
+	mutex_unlock(&adap->devnode.lock);
+}
+
+/* Notify userspace that the CEC pin changed state at the given time. */
+void cec_queue_pin_cec_event(struct cec_adapter *adap, bool is_high,
+			     bool dropped_events, ktime_t ts)
+{
+	struct cec_event ev = {
+		.event = is_high ? CEC_EVENT_PIN_CEC_HIGH :
+				   CEC_EVENT_PIN_CEC_LOW,
+		.flags = dropped_events ? CEC_EVENT_FL_DROPPED_EVENTS : 0,
+	};
+	struct cec_fh *fh;
+
+	mutex_lock(&adap->devnode.lock);
+	list_for_each_entry(fh, &adap->devnode.fhs, list)
+		if (fh->mode_follower == CEC_MODE_MONITOR_PIN)
+			cec_queue_event_fh(fh, &ev, ktime_to_ns(ts));
+	mutex_unlock(&adap->devnode.lock);
+}
+EXPORT_SYMBOL_GPL(cec_queue_pin_cec_event);
+
+/* Notify userspace that the HPD pin changed state at the given time. */
+void cec_queue_pin_hpd_event(struct cec_adapter *adap, bool is_high, ktime_t ts)
+{
+	struct cec_event ev = {
+		.event = is_high ? CEC_EVENT_PIN_HPD_HIGH :
+				   CEC_EVENT_PIN_HPD_LOW,
+	};
+	struct cec_fh *fh;
+
+	mutex_lock(&adap->devnode.lock);
+	list_for_each_entry(fh, &adap->devnode.fhs, list)
+		cec_queue_event_fh(fh, &ev, ktime_to_ns(ts));
+	mutex_unlock(&adap->devnode.lock);
+}
+EXPORT_SYMBOL_GPL(cec_queue_pin_hpd_event);
+
+/* Notify userspace that the 5V pin changed state at the given time. */
+void cec_queue_pin_5v_event(struct cec_adapter *adap, bool is_high, ktime_t ts)
+{
+	struct cec_event ev = {
+		.event = is_high ? CEC_EVENT_PIN_5V_HIGH :
+				   CEC_EVENT_PIN_5V_LOW,
+	};
+	struct cec_fh *fh;
+
+	mutex_lock(&adap->devnode.lock);
+	list_for_each_entry(fh, &adap->devnode.fhs, list)
+		cec_queue_event_fh(fh, &ev, ktime_to_ns(ts));
+	mutex_unlock(&adap->devnode.lock);
+}
+EXPORT_SYMBOL_GPL(cec_queue_pin_5v_event);
+
+/*
+ * Queue a new message for this filehandle.
+ *
+ * We keep a queue of at most CEC_MAX_MSG_RX_QUEUE_SZ messages. If the
+ * queue becomes full, then drop the oldest message and keep track
+ * of how many messages we've dropped.
+ */
+static void cec_queue_msg_fh(struct cec_fh *fh, const struct cec_msg *msg)
+{
+	static const struct cec_event ev_lost_msgs = {
+		.event = CEC_EVENT_LOST_MSGS,
+		.flags = 0,
+		{
+			.lost_msgs = { 1 },
+		},
+	};
+	struct cec_msg_entry *entry;
+
+	mutex_lock(&fh->lock);
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (entry) {
+		entry->msg = *msg;
+		/* Add new msg at the end of the queue */
+		list_add_tail(&entry->list, &fh->msgs);
+
+		if (fh->queued_msgs < CEC_MAX_MSG_RX_QUEUE_SZ) {
+			/* All is fine if there is enough room */
+			fh->queued_msgs++;
+			mutex_unlock(&fh->lock);
+			wake_up_interruptible(&fh->wait);
+			return;
+		}
+
+		/*
+		 * if the message queue is full, then drop the oldest one and
+		 * send a lost message event.
+		 */
+		entry = list_first_entry(&fh->msgs, struct cec_msg_entry, list);
+		list_del(&entry->list);
+		kfree(entry);
+	}
+	mutex_unlock(&fh->lock);
+
+	/*
+	 * We lost a message, either because kmalloc failed or the queue
+	 * was full.
+	 */
+	cec_queue_event_fh(fh, &ev_lost_msgs, ktime_get_ns());
+}
+
+/*
+ * Queue the message for those filehandles that are in monitor mode.
+ * If valid_la is true (this message is for us or was sent by us),
+ * then pass it on to any monitoring filehandle. If this message
+ * isn't for us or from us, then only give it to filehandles that
+ * are in MONITOR_ALL mode.
+ *
+ * This can only happen if the CEC_CAP_MONITOR_ALL capability is
+ * set and the CEC adapter was placed in 'monitor all' mode.
+ */
+static void cec_queue_msg_monitor(struct cec_adapter *adap,
+				  const struct cec_msg *msg,
+				  bool valid_la)
+{
+	struct cec_fh *fh;
+	u32 monitor_mode = valid_la ? CEC_MODE_MONITOR :
+				      CEC_MODE_MONITOR_ALL;
+
+	mutex_lock(&adap->devnode.lock);
+	list_for_each_entry(fh, &adap->devnode.fhs, list) {
+		if (fh->mode_follower >= monitor_mode)
+			cec_queue_msg_fh(fh, msg);
+	}
+	mutex_unlock(&adap->devnode.lock);
+}
+
+/*
+ * Queue the message for follower filehandles.
+ */
+static void cec_queue_msg_followers(struct cec_adapter *adap,
+				    const struct cec_msg *msg)
+{
+	struct cec_fh *fh;
+
+	mutex_lock(&adap->devnode.lock);
+	list_for_each_entry(fh, &adap->devnode.fhs, list) {
+		if (fh->mode_follower == CEC_MODE_FOLLOWER)
+			cec_queue_msg_fh(fh, msg);
+	}
+	mutex_unlock(&adap->devnode.lock);
+}
+
+/* Notify userspace of an adapter state change. */
+static void cec_post_state_event(struct cec_adapter *adap)
+{
+	struct cec_event ev = {
+		.event = CEC_EVENT_STATE_CHANGE,
+	};
+
+	ev.state_change.phys_addr = adap->phys_addr;
+	ev.state_change.log_addr_mask = adap->log_addrs.log_addr_mask;
+	cec_queue_event(adap, &ev);
+}
+
+/*
+ * A CEC transmit (and a possible wait for reply) completed.
+ * If this was in blocking mode, then complete it, otherwise
+ * queue the message for userspace to dequeue later.
+ *
+ * This function is called with adap->lock held.
+ */
+static void cec_data_completed(struct cec_data *data)
+{
+	/*
+	 * Delete this transmit from the filehandle's xfer_list since
+	 * we're done with it.
+	 *
+	 * Note that if the filehandle is closed before this transmit
+	 * finished, then the release() function will set data->fh to NULL.
+	 * Without that we would be referring to a closed filehandle.
+	 */
+	if (data->fh)
+		list_del(&data->xfer_list);
+
+	if (data->blocking) {
+		/*
+		 * Someone is blocking so mark the message as completed
+		 * and call complete.
+		 */
+		data->completed = true;
+		complete(&data->c);
+	} else {
+		/*
+		 * No blocking, so just queue the message if needed and
+		 * free the memory.
+		 */
+		if (data->fh)
+			cec_queue_msg_fh(data->fh, &data->msg);
+		kfree(data);
+	}
+}
+
+/*
+ * A pending CEC transmit needs to be cancelled, either because the CEC
+ * adapter is disabled or the transmit takes an impossibly long time to
+ * finish.
+ *
+ * This function is called with adap->lock held.
+ */
+static void cec_data_cancel(struct cec_data *data, u8 tx_status)
+{
+	/*
+	 * It's either the current transmit, or it is a pending
+	 * transmit. Take the appropriate action to clear it.
+	 */
+	if (data->adap->transmitting == data) {
+		data->adap->transmitting = NULL;
+	} else {
+		list_del_init(&data->list);
+		if (!(data->msg.tx_status & CEC_TX_STATUS_OK))
+			if (!WARN_ON(!data->adap->transmit_queue_sz))
+				data->adap->transmit_queue_sz--;
+	}
+
+	if (data->msg.tx_status & CEC_TX_STATUS_OK) {
+		data->msg.rx_ts = ktime_get_ns();
+		data->msg.rx_status = CEC_RX_STATUS_ABORTED;
+	} else {
+		data->msg.tx_ts = ktime_get_ns();
+		data->msg.tx_status |= tx_status |
+				       CEC_TX_STATUS_MAX_RETRIES;
+		data->msg.tx_error_cnt++;
+		data->attempts = 0;
+	}
+
+	/* Queue transmitted message for monitoring purposes */
+	cec_queue_msg_monitor(data->adap, &data->msg, 1);
+
+	cec_data_completed(data);
+}
+
+/*
+ * Flush all pending transmits and cancel any pending timeout work.
+ *
+ * This function is called with adap->lock held.
+ */
+static void cec_flush(struct cec_adapter *adap)
+{
+	struct cec_data *data, *n;
+
+	/*
+	 * If the adapter is disabled, or we're asked to stop,
+	 * then cancel any pending transmits.
+	 */
+	while (!list_empty(&adap->transmit_queue)) {
+		data = list_first_entry(&adap->transmit_queue,
+					struct cec_data, list);
+		cec_data_cancel(data, CEC_TX_STATUS_ABORTED);
+	}
+	if (adap->transmitting)
+		cec_data_cancel(adap->transmitting, CEC_TX_STATUS_ABORTED);
+
+	/* Cancel the pending timeout work. */
+	list_for_each_entry_safe(data, n, &adap->wait_queue, list) {
+		if (cancel_delayed_work(&data->work))
+			cec_data_cancel(data, CEC_TX_STATUS_OK);
+		/*
+		 * If cancel_delayed_work returned false, then
+		 * the cec_wait_timeout function is running,
+		 * which will call cec_data_completed. So no
+		 * need to do anything special in that case.
+		 */
+	}
+	/*
+	 * If something went wrong and this counter isn't what it should
+	 * be, then this will reset it back to 0. Warn if it is not 0,
+	 * since it indicates a bug, either in this framework or in a
+	 * CEC driver.
+	 */
+	if (WARN_ON(adap->transmit_queue_sz))
+		adap->transmit_queue_sz = 0;
+}
+
+/*
+ * Main CEC state machine
+ *
+ * Wait until the thread should be stopped, or we are not transmitting and
+ * a new transmit message is queued up, in which case we start transmitting
+ * that message. When the adapter finished transmitting the message it will
+ * call cec_transmit_done().
+ *
+ * If the adapter is disabled, then remove all queued messages instead.
+ *
+ * If the current transmit times out, then cancel that transmit.
+ */
+int cec_thread_func(void *_adap)
+{
+	struct cec_adapter *adap = _adap;
+
+	for (;;) {
+		unsigned int signal_free_time;
+		struct cec_data *data;
+		bool timeout = false;
+		u8 attempts;
+
+		if (adap->transmit_in_progress) {
+			int err;
+
+			/*
+			 * We are transmitting a message, so add a timeout
+			 * to prevent the state machine to get stuck waiting
+			 * for this message to finalize and add a check to
+			 * see if the adapter is disabled in which case the
+			 * transmit should be canceled.
+			 */
+			err = wait_event_interruptible_timeout(adap->kthread_waitq,
+				(adap->needs_hpd &&
+				 (!adap->is_configured && !adap->is_configuring)) ||
+				kthread_should_stop() ||
+				(!adap->transmit_in_progress &&
+				 !list_empty(&adap->transmit_queue)),
+				msecs_to_jiffies(CEC_XFER_TIMEOUT_MS));
+			timeout = err == 0;
+		} else {
+			/* Otherwise we just wait for something to happen. */
+			wait_event_interruptible(adap->kthread_waitq,
+				kthread_should_stop() ||
+				(!adap->transmit_in_progress &&
+				 !list_empty(&adap->transmit_queue)));
+		}
+
+		mutex_lock(&adap->lock);
+
+		if ((adap->needs_hpd &&
+		     (!adap->is_configured && !adap->is_configuring)) ||
+		    kthread_should_stop()) {
+			cec_flush(adap);
+			goto unlock;
+		}
+
+		if (adap->transmit_in_progress && timeout) {
+			/*
+			 * If we timeout, then log that. Normally this does
+			 * not happen and it is an indication of a faulty CEC
+			 * adapter driver, or the CEC bus is in some weird
+			 * state. On rare occasions it can happen if there is
+			 * so much traffic on the bus that the adapter was
+			 * unable to transmit for CEC_XFER_TIMEOUT_MS (2.1s).
+			 */
+			if (adap->transmitting) {
+				pr_warn("cec-%s: message %*ph timed out\n", adap->name,
+					adap->transmitting->msg.len,
+					adap->transmitting->msg.msg);
+				/* Just give up on this. */
+				cec_data_cancel(adap->transmitting,
+						CEC_TX_STATUS_TIMEOUT);
+			} else {
+				pr_warn("cec-%s: transmit timed out\n", adap->name);
+			}
+			adap->transmit_in_progress = false;
+			adap->tx_timeouts++;
+			goto unlock;
+		}
+
+		/*
+		 * If we are still transmitting, or there is nothing new to
+		 * transmit, then just continue waiting.
+		 */
+		if (adap->transmit_in_progress || list_empty(&adap->transmit_queue))
+			goto unlock;
+
+		/* Get a new message to transmit */
+		data = list_first_entry(&adap->transmit_queue,
+					struct cec_data, list);
+		list_del_init(&data->list);
+		if (!WARN_ON(!data->adap->transmit_queue_sz))
+			adap->transmit_queue_sz--;
+
+		/* Make this the current transmitting message */
+		adap->transmitting = data;
+
+		/*
+		 * Suggested number of attempts as per the CEC 2.0 spec:
+		 * 4 attempts is the default, except for 'secondary poll
+		 * messages', i.e. poll messages not sent during the adapter
+		 * configuration phase when it allocates logical addresses.
+		 */
+		if (data->msg.len == 1 && adap->is_configured)
+			attempts = 2;
+		else
+			attempts = 4;
+
+		/* Set the suggested signal free time */
+		if (data->attempts) {
+			/* should be >= 3 data bit periods for a retry */
+			signal_free_time = CEC_SIGNAL_FREE_TIME_RETRY;
+		} else if (adap->last_initiator !=
+			   cec_msg_initiator(&data->msg)) {
+			/* should be >= 5 data bit periods for new initiator */
+			signal_free_time = CEC_SIGNAL_FREE_TIME_NEW_INITIATOR;
+			adap->last_initiator = cec_msg_initiator(&data->msg);
+		} else {
+			/*
+			 * should be >= 7 data bit periods for sending another
+			 * frame immediately after another.
+			 */
+			signal_free_time = CEC_SIGNAL_FREE_TIME_NEXT_XFER;
+		}
+		if (data->attempts == 0)
+			data->attempts = attempts;
+
+		/* Tell the adapter to transmit, cancel on error */
+		if (adap->ops->adap_transmit(adap, data->attempts,
+					     signal_free_time, &data->msg))
+			cec_data_cancel(data, CEC_TX_STATUS_ABORTED);
+		else
+			adap->transmit_in_progress = true;
+
+unlock:
+		mutex_unlock(&adap->lock);
+
+		if (kthread_should_stop())
+			break;
+	}
+	return 0;
+}
+
+/*
+ * Called by the CEC adapter if a transmit finished.
+ */
+void cec_transmit_done_ts(struct cec_adapter *adap, u8 status,
+			  u8 arb_lost_cnt, u8 nack_cnt, u8 low_drive_cnt,
+			  u8 error_cnt, ktime_t ts)
+{
+	struct cec_data *data;
+	struct cec_msg *msg;
+	unsigned int attempts_made = arb_lost_cnt + nack_cnt +
+				     low_drive_cnt + error_cnt;
+
+	dprintk(2, "%s: status 0x%02x\n", __func__, status);
+	if (attempts_made < 1)
+		attempts_made = 1;
+
+	mutex_lock(&adap->lock);
+	data = adap->transmitting;
+	if (!data) {
+		/*
+		 * This might happen if a transmit was issued and the cable is
+		 * unplugged while the transmit is ongoing. Ignore this
+		 * transmit in that case.
+		 */
+		if (!adap->transmit_in_progress)
+			dprintk(1, "%s was called without an ongoing transmit!\n",
+				__func__);
+		adap->transmit_in_progress = false;
+		goto wake_thread;
+	}
+	adap->transmit_in_progress = false;
+
+	msg = &data->msg;
+
+	/* Drivers must fill in the status! */
+	WARN_ON(status == 0);
+	msg->tx_ts = ktime_to_ns(ts);
+	msg->tx_status |= status;
+	msg->tx_arb_lost_cnt += arb_lost_cnt;
+	msg->tx_nack_cnt += nack_cnt;
+	msg->tx_low_drive_cnt += low_drive_cnt;
+	msg->tx_error_cnt += error_cnt;
+
+	/* Mark that we're done with this transmit */
+	adap->transmitting = NULL;
+
+	/*
+	 * If there are still retry attempts left and there was an error and
+	 * the hardware didn't signal that it retried itself (by setting
+	 * CEC_TX_STATUS_MAX_RETRIES), then we will retry ourselves.
+	 */
+	if (data->attempts > attempts_made &&
+	    !(status & (CEC_TX_STATUS_MAX_RETRIES | CEC_TX_STATUS_OK))) {
+		/* Retry this message */
+		data->attempts -= attempts_made;
+		if (msg->timeout)
+			dprintk(2, "retransmit: %*ph (attempts: %d, wait for 0x%02x)\n",
+				msg->len, msg->msg, data->attempts, msg->reply);
+		else
+			dprintk(2, "retransmit: %*ph (attempts: %d)\n",
+				msg->len, msg->msg, data->attempts);
+		/* Add the message in front of the transmit queue */
+		list_add(&data->list, &adap->transmit_queue);
+		adap->transmit_queue_sz++;
+		goto wake_thread;
+	}
+
+	data->attempts = 0;
+
+	/* Always set CEC_TX_STATUS_MAX_RETRIES on error */
+	if (!(status & CEC_TX_STATUS_OK))
+		msg->tx_status |= CEC_TX_STATUS_MAX_RETRIES;
+
+	/* Queue transmitted message for monitoring purposes */
+	cec_queue_msg_monitor(adap, msg, 1);
+
+	if ((status & CEC_TX_STATUS_OK) && adap->is_configured &&
+	    msg->timeout) {
+		/*
+		 * Queue the message into the wait queue if we want to wait
+		 * for a reply.
+		 */
+		list_add_tail(&data->list, &adap->wait_queue);
+		schedule_delayed_work(&data->work,
+				      msecs_to_jiffies(msg->timeout));
+	} else {
+		/* Otherwise we're done */
+		cec_data_completed(data);
+	}
+
+wake_thread:
+	/*
+	 * Wake up the main thread to see if another message is ready
+	 * for transmitting or to retry the current message.
+	 */
+	wake_up_interruptible(&adap->kthread_waitq);
+	mutex_unlock(&adap->lock);
+}
+EXPORT_SYMBOL_GPL(cec_transmit_done_ts);
+
+void cec_transmit_attempt_done_ts(struct cec_adapter *adap,
+				  u8 status, ktime_t ts)
+{
+	switch (status & ~CEC_TX_STATUS_MAX_RETRIES) {
+	case CEC_TX_STATUS_OK:
+		cec_transmit_done_ts(adap, status, 0, 0, 0, 0, ts);
+		return;
+	case CEC_TX_STATUS_ARB_LOST:
+		cec_transmit_done_ts(adap, status, 1, 0, 0, 0, ts);
+		return;
+	case CEC_TX_STATUS_NACK:
+		cec_transmit_done_ts(adap, status, 0, 1, 0, 0, ts);
+		return;
+	case CEC_TX_STATUS_LOW_DRIVE:
+		cec_transmit_done_ts(adap, status, 0, 0, 1, 0, ts);
+		return;
+	case CEC_TX_STATUS_ERROR:
+		cec_transmit_done_ts(adap, status, 0, 0, 0, 1, ts);
+		return;
+	default:
+		/* Should never happen */
+		WARN(1, "cec-%s: invalid status 0x%02x\n", adap->name, status);
+		return;
+	}
+}
+EXPORT_SYMBOL_GPL(cec_transmit_attempt_done_ts);
+
+/*
+ * Called when waiting for a reply times out.
+ */
+static void cec_wait_timeout(struct work_struct *work)
+{
+	struct cec_data *data = container_of(work, struct cec_data, work.work);
+	struct cec_adapter *adap = data->adap;
+
+	mutex_lock(&adap->lock);
+	/*
+	 * Sanity check in case the timeout and the arrival of the message
+	 * happened at the same time.
+	 */
+	if (list_empty(&data->list))
+		goto unlock;
+
+	/* Mark the message as timed out */
+	list_del_init(&data->list);
+	data->msg.rx_ts = ktime_get_ns();
+	data->msg.rx_status = CEC_RX_STATUS_TIMEOUT;
+	cec_data_completed(data);
+unlock:
+	mutex_unlock(&adap->lock);
+}
+
+/*
+ * Transmit a message. The fh argument may be NULL if the transmit is not
+ * associated with a specific filehandle.
+ *
+ * This function is called with adap->lock held.
+ */
+int cec_transmit_msg_fh(struct cec_adapter *adap, struct cec_msg *msg,
+			struct cec_fh *fh, bool block)
+{
+	struct cec_data *data;
+
+	msg->rx_ts = 0;
+	msg->tx_ts = 0;
+	msg->rx_status = 0;
+	msg->tx_status = 0;
+	msg->tx_arb_lost_cnt = 0;
+	msg->tx_nack_cnt = 0;
+	msg->tx_low_drive_cnt = 0;
+	msg->tx_error_cnt = 0;
+	msg->sequence = 0;
+
+	if (msg->reply && msg->timeout == 0) {
+		/* Make sure the timeout isn't 0. */
+		msg->timeout = 1000;
+	}
+	if (msg->timeout)
+		msg->flags &= CEC_MSG_FL_REPLY_TO_FOLLOWERS;
+	else
+		msg->flags = 0;
+
+	if (msg->len > 1 && msg->msg[1] == CEC_MSG_CDC_MESSAGE) {
+		msg->msg[2] = adap->phys_addr >> 8;
+		msg->msg[3] = adap->phys_addr & 0xff;
+	}
+
+	/* Sanity checks */
+	if (msg->len == 0 || msg->len > CEC_MAX_MSG_SIZE) {
+		dprintk(1, "%s: invalid length %d\n", __func__, msg->len);
+		return -EINVAL;
+	}
+
+	memset(msg->msg + msg->len, 0, sizeof(msg->msg) - msg->len);
+
+	if (msg->timeout)
+		dprintk(2, "%s: %*ph (wait for 0x%02x%s)\n",
+			__func__, msg->len, msg->msg, msg->reply,
+			!block ? ", nb" : "");
+	else
+		dprintk(2, "%s: %*ph%s\n",
+			__func__, msg->len, msg->msg, !block ? " (nb)" : "");
+
+	if (msg->timeout && msg->len == 1) {
+		dprintk(1, "%s: can't reply to poll msg\n", __func__);
+		return -EINVAL;
+	}
+	if (msg->len == 1) {
+		if (cec_msg_destination(msg) == 0xf) {
+			dprintk(1, "%s: invalid poll message\n", __func__);
+			return -EINVAL;
+		}
+		if (cec_has_log_addr(adap, cec_msg_destination(msg))) {
+			/*
+			 * If the destination is a logical address our adapter
+			 * has already claimed, then just NACK this.
+			 * It depends on the hardware what it will do with a
+			 * POLL to itself (some OK this), so it is just as
+			 * easy to handle it here so the behavior will be
+			 * consistent.
+			 */
+			msg->tx_ts = ktime_get_ns();
+			msg->tx_status = CEC_TX_STATUS_NACK |
+					 CEC_TX_STATUS_MAX_RETRIES;
+			msg->tx_nack_cnt = 1;
+			msg->sequence = ++adap->sequence;
+			if (!msg->sequence)
+				msg->sequence = ++adap->sequence;
+			return 0;
+		}
+	}
+	if (msg->len > 1 && !cec_msg_is_broadcast(msg) &&
+	    cec_has_log_addr(adap, cec_msg_destination(msg))) {
+		dprintk(1, "%s: destination is the adapter itself\n", __func__);
+		return -EINVAL;
+	}
+	if (msg->len > 1 && adap->is_configured &&
+	    !cec_has_log_addr(adap, cec_msg_initiator(msg))) {
+		dprintk(1, "%s: initiator has unknown logical address %d\n",
+			__func__, cec_msg_initiator(msg));
+		return -EINVAL;
+	}
+	if (!adap->is_configured && !adap->is_configuring) {
+		if (adap->needs_hpd || msg->msg[0] != 0xf0) {
+			dprintk(1, "%s: adapter is unconfigured\n", __func__);
+			return -ENONET;
+		}
+		if (msg->reply) {
+			dprintk(1, "%s: invalid msg->reply\n", __func__);
+			return -EINVAL;
+		}
+	}
+
+	if (adap->transmit_queue_sz >= CEC_MAX_MSG_TX_QUEUE_SZ) {
+		dprintk(1, "%s: transmit queue full\n", __func__);
+		return -EBUSY;
+	}
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	msg->sequence = ++adap->sequence;
+	if (!msg->sequence)
+		msg->sequence = ++adap->sequence;
+
+	data->msg = *msg;
+	data->fh = fh;
+	data->adap = adap;
+	data->blocking = block;
+
+	init_completion(&data->c);
+	INIT_DELAYED_WORK(&data->work, cec_wait_timeout);
+
+	if (fh)
+		list_add_tail(&data->xfer_list, &fh->xfer_list);
+
+	list_add_tail(&data->list, &adap->transmit_queue);
+	adap->transmit_queue_sz++;
+	if (!adap->transmitting)
+		wake_up_interruptible(&adap->kthread_waitq);
+
+	/* All done if we don't need to block waiting for completion */
+	if (!block)
+		return 0;
+
+	/*
+	 * Release the lock and wait, retake the lock afterwards.
+	 */
+	mutex_unlock(&adap->lock);
+	wait_for_completion_killable(&data->c);
+	if (!data->completed)
+		cancel_delayed_work_sync(&data->work);
+	mutex_lock(&adap->lock);
+
+	/* Cancel the transmit if it was interrupted */
+	if (!data->completed)
+		cec_data_cancel(data, CEC_TX_STATUS_ABORTED);
+
+	/* The transmit completed (possibly with an error) */
+	*msg = data->msg;
+	kfree(data);
+	return 0;
+}
+
+/* Helper function to be used by drivers and this framework. */
+int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg,
+		     bool block)
+{
+	int ret;
+
+	mutex_lock(&adap->lock);
+	ret = cec_transmit_msg_fh(adap, msg, NULL, block);
+	mutex_unlock(&adap->lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cec_transmit_msg);
+
+/*
+ * I don't like forward references but without this the low-level
+ * cec_received_msg() function would come after a bunch of high-level
+ * CEC protocol handling functions. That was very confusing.
+ */
+static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
+			      bool is_reply);
+
+#define DIRECTED	0x80
+#define BCAST1_4	0x40
+#define BCAST2_0	0x20	/* broadcast only allowed for >= 2.0 */
+#define BCAST		(BCAST1_4 | BCAST2_0)
+#define BOTH		(BCAST | DIRECTED)
+
+/*
+ * Specify minimum length and whether the message is directed, broadcast
+ * or both. Messages that do not match the criteria are ignored as per
+ * the CEC specification.
+ */
+static const u8 cec_msg_size[256] = {
+	[CEC_MSG_ACTIVE_SOURCE] = 4 | BCAST,
+	[CEC_MSG_IMAGE_VIEW_ON] = 2 | DIRECTED,
+	[CEC_MSG_TEXT_VIEW_ON] = 2 | DIRECTED,
+	[CEC_MSG_INACTIVE_SOURCE] = 4 | DIRECTED,
+	[CEC_MSG_REQUEST_ACTIVE_SOURCE] = 2 | BCAST,
+	[CEC_MSG_ROUTING_CHANGE] = 6 | BCAST,
+	[CEC_MSG_ROUTING_INFORMATION] = 4 | BCAST,
+	[CEC_MSG_SET_STREAM_PATH] = 4 | BCAST,
+	[CEC_MSG_STANDBY] = 2 | BOTH,
+	[CEC_MSG_RECORD_OFF] = 2 | DIRECTED,
+	[CEC_MSG_RECORD_ON] = 3 | DIRECTED,
+	[CEC_MSG_RECORD_STATUS] = 3 | DIRECTED,
+	[CEC_MSG_RECORD_TV_SCREEN] = 2 | DIRECTED,
+	[CEC_MSG_CLEAR_ANALOGUE_TIMER] = 13 | DIRECTED,
+	[CEC_MSG_CLEAR_DIGITAL_TIMER] = 16 | DIRECTED,
+	[CEC_MSG_CLEAR_EXT_TIMER] = 13 | DIRECTED,
+	[CEC_MSG_SET_ANALOGUE_TIMER] = 13 | DIRECTED,
+	[CEC_MSG_SET_DIGITAL_TIMER] = 16 | DIRECTED,
+	[CEC_MSG_SET_EXT_TIMER] = 13 | DIRECTED,
+	[CEC_MSG_SET_TIMER_PROGRAM_TITLE] = 2 | DIRECTED,
+	[CEC_MSG_TIMER_CLEARED_STATUS] = 3 | DIRECTED,
+	[CEC_MSG_TIMER_STATUS] = 3 | DIRECTED,
+	[CEC_MSG_CEC_VERSION] = 3 | DIRECTED,
+	[CEC_MSG_GET_CEC_VERSION] = 2 | DIRECTED,
+	[CEC_MSG_GIVE_PHYSICAL_ADDR] = 2 | DIRECTED,
+	[CEC_MSG_GET_MENU_LANGUAGE] = 2 | DIRECTED,
+	[CEC_MSG_REPORT_PHYSICAL_ADDR] = 5 | BCAST,
+	[CEC_MSG_SET_MENU_LANGUAGE] = 5 | BCAST,
+	[CEC_MSG_REPORT_FEATURES] = 6 | BCAST,
+	[CEC_MSG_GIVE_FEATURES] = 2 | DIRECTED,
+	[CEC_MSG_DECK_CONTROL] = 3 | DIRECTED,
+	[CEC_MSG_DECK_STATUS] = 3 | DIRECTED,
+	[CEC_MSG_GIVE_DECK_STATUS] = 3 | DIRECTED,
+	[CEC_MSG_PLAY] = 3 | DIRECTED,
+	[CEC_MSG_GIVE_TUNER_DEVICE_STATUS] = 3 | DIRECTED,
+	[CEC_MSG_SELECT_ANALOGUE_SERVICE] = 6 | DIRECTED,
+	[CEC_MSG_SELECT_DIGITAL_SERVICE] = 9 | DIRECTED,
+	[CEC_MSG_TUNER_DEVICE_STATUS] = 7 | DIRECTED,
+	[CEC_MSG_TUNER_STEP_DECREMENT] = 2 | DIRECTED,
+	[CEC_MSG_TUNER_STEP_INCREMENT] = 2 | DIRECTED,
+	[CEC_MSG_DEVICE_VENDOR_ID] = 5 | BCAST,
+	[CEC_MSG_GIVE_DEVICE_VENDOR_ID] = 2 | DIRECTED,
+	[CEC_MSG_VENDOR_COMMAND] = 2 | DIRECTED,
+	[CEC_MSG_VENDOR_COMMAND_WITH_ID] = 5 | BOTH,
+	[CEC_MSG_VENDOR_REMOTE_BUTTON_DOWN] = 2 | BOTH,
+	[CEC_MSG_VENDOR_REMOTE_BUTTON_UP] = 2 | BOTH,
+	[CEC_MSG_SET_OSD_STRING] = 3 | DIRECTED,
+	[CEC_MSG_GIVE_OSD_NAME] = 2 | DIRECTED,
+	[CEC_MSG_SET_OSD_NAME] = 2 | DIRECTED,
+	[CEC_MSG_MENU_REQUEST] = 3 | DIRECTED,
+	[CEC_MSG_MENU_STATUS] = 3 | DIRECTED,
+	[CEC_MSG_USER_CONTROL_PRESSED] = 3 | DIRECTED,
+	[CEC_MSG_USER_CONTROL_RELEASED] = 2 | DIRECTED,
+	[CEC_MSG_GIVE_DEVICE_POWER_STATUS] = 2 | DIRECTED,
+	[CEC_MSG_REPORT_POWER_STATUS] = 3 | DIRECTED | BCAST2_0,
+	[CEC_MSG_FEATURE_ABORT] = 4 | DIRECTED,
+	[CEC_MSG_ABORT] = 2 | DIRECTED,
+	[CEC_MSG_GIVE_AUDIO_STATUS] = 2 | DIRECTED,
+	[CEC_MSG_GIVE_SYSTEM_AUDIO_MODE_STATUS] = 2 | DIRECTED,
+	[CEC_MSG_REPORT_AUDIO_STATUS] = 3 | DIRECTED,
+	[CEC_MSG_REPORT_SHORT_AUDIO_DESCRIPTOR] = 2 | DIRECTED,
+	[CEC_MSG_REQUEST_SHORT_AUDIO_DESCRIPTOR] = 2 | DIRECTED,
+	[CEC_MSG_SET_SYSTEM_AUDIO_MODE] = 3 | BOTH,
+	[CEC_MSG_SYSTEM_AUDIO_MODE_REQUEST] = 2 | DIRECTED,
+	[CEC_MSG_SYSTEM_AUDIO_MODE_STATUS] = 3 | DIRECTED,
+	[CEC_MSG_SET_AUDIO_RATE] = 3 | DIRECTED,
+	[CEC_MSG_INITIATE_ARC] = 2 | DIRECTED,
+	[CEC_MSG_REPORT_ARC_INITIATED] = 2 | DIRECTED,
+	[CEC_MSG_REPORT_ARC_TERMINATED] = 2 | DIRECTED,
+	[CEC_MSG_REQUEST_ARC_INITIATION] = 2 | DIRECTED,
+	[CEC_MSG_REQUEST_ARC_TERMINATION] = 2 | DIRECTED,
+	[CEC_MSG_TERMINATE_ARC] = 2 | DIRECTED,
+	[CEC_MSG_REQUEST_CURRENT_LATENCY] = 4 | BCAST,
+	[CEC_MSG_REPORT_CURRENT_LATENCY] = 6 | BCAST,
+	[CEC_MSG_CDC_MESSAGE] = 2 | BCAST,
+};
+
+/* Called by the CEC adapter if a message is received */
+void cec_received_msg_ts(struct cec_adapter *adap,
+			 struct cec_msg *msg, ktime_t ts)
+{
+	struct cec_data *data;
+	u8 msg_init = cec_msg_initiator(msg);
+	u8 msg_dest = cec_msg_destination(msg);
+	u8 cmd = msg->msg[1];
+	bool is_reply = false;
+	bool valid_la = true;
+	u8 min_len = 0;
+
+	if (WARN_ON(!msg->len || msg->len > CEC_MAX_MSG_SIZE))
+		return;
+
+	/*
+	 * Some CEC adapters will receive the messages that they transmitted.
+	 * This test filters out those messages by checking if we are the
+	 * initiator, and just returning in that case.
+	 *
+	 * Note that this won't work if this is an Unregistered device.
+	 *
+	 * It is bad practice if the hardware receives the message that it
+	 * transmitted and luckily most CEC adapters behave correctly in this
+	 * respect.
+	 */
+	if (msg_init != CEC_LOG_ADDR_UNREGISTERED &&
+	    cec_has_log_addr(adap, msg_init))
+		return;
+
+	msg->rx_ts = ktime_to_ns(ts);
+	msg->rx_status = CEC_RX_STATUS_OK;
+	msg->sequence = msg->reply = msg->timeout = 0;
+	msg->tx_status = 0;
+	msg->tx_ts = 0;
+	msg->tx_arb_lost_cnt = 0;
+	msg->tx_nack_cnt = 0;
+	msg->tx_low_drive_cnt = 0;
+	msg->tx_error_cnt = 0;
+	msg->flags = 0;
+	memset(msg->msg + msg->len, 0, sizeof(msg->msg) - msg->len);
+
+	mutex_lock(&adap->lock);
+	dprintk(2, "%s: %*ph\n", __func__, msg->len, msg->msg);
+
+	adap->last_initiator = 0xff;
+
+	/* Check if this message was for us (directed or broadcast). */
+	if (!cec_msg_is_broadcast(msg))
+		valid_la = cec_has_log_addr(adap, msg_dest);
+
+	/*
+	 * Check if the length is not too short or if the message is a
+	 * broadcast message where a directed message was expected or
+	 * vice versa. If so, then the message has to be ignored (according
+	 * to section CEC 7.3 and CEC 12.2).
+	 */
+	if (valid_la && msg->len > 1 && cec_msg_size[cmd]) {
+		u8 dir_fl = cec_msg_size[cmd] & BOTH;
+
+		min_len = cec_msg_size[cmd] & 0x1f;
+		if (msg->len < min_len)
+			valid_la = false;
+		else if (!cec_msg_is_broadcast(msg) && !(dir_fl & DIRECTED))
+			valid_la = false;
+		else if (cec_msg_is_broadcast(msg) && !(dir_fl & BCAST))
+			valid_la = false;
+		else if (cec_msg_is_broadcast(msg) &&
+			 adap->log_addrs.cec_version < CEC_OP_CEC_VERSION_2_0 &&
+			 !(dir_fl & BCAST1_4))
+			valid_la = false;
+	}
+	if (valid_la && min_len) {
+		/* These messages have special length requirements */
+		switch (cmd) {
+		case CEC_MSG_TIMER_STATUS:
+			if (msg->msg[2] & 0x10) {
+				switch (msg->msg[2] & 0xf) {
+				case CEC_OP_PROG_INFO_NOT_ENOUGH_SPACE:
+				case CEC_OP_PROG_INFO_MIGHT_NOT_BE_ENOUGH_SPACE:
+					if (msg->len < 5)
+						valid_la = false;
+					break;
+				}
+			} else if ((msg->msg[2] & 0xf) == CEC_OP_PROG_ERROR_DUPLICATE) {
+				if (msg->len < 5)
+					valid_la = false;
+			}
+			break;
+		case CEC_MSG_RECORD_ON:
+			switch (msg->msg[2]) {
+			case CEC_OP_RECORD_SRC_OWN:
+				break;
+			case CEC_OP_RECORD_SRC_DIGITAL:
+				if (msg->len < 10)
+					valid_la = false;
+				break;
+			case CEC_OP_RECORD_SRC_ANALOG:
+				if (msg->len < 7)
+					valid_la = false;
+				break;
+			case CEC_OP_RECORD_SRC_EXT_PLUG:
+				if (msg->len < 4)
+					valid_la = false;
+				break;
+			case CEC_OP_RECORD_SRC_EXT_PHYS_ADDR:
+				if (msg->len < 5)
+					valid_la = false;
+				break;
+			}
+			break;
+		}
+	}
+
+	/* It's a valid message and not a poll or CDC message */
+	if (valid_la && msg->len > 1 && cmd != CEC_MSG_CDC_MESSAGE) {
+		bool abort = cmd == CEC_MSG_FEATURE_ABORT;
+
+		/* The aborted command is in msg[2] */
+		if (abort)
+			cmd = msg->msg[2];
+
+		/*
+		 * Walk over all transmitted messages that are waiting for a
+		 * reply.
+		 */
+		list_for_each_entry(data, &adap->wait_queue, list) {
+			struct cec_msg *dst = &data->msg;
+
+			/*
+			 * The *only* CEC message that has two possible replies
+			 * is CEC_MSG_INITIATE_ARC.
+			 * In this case allow either of the two replies.
+			 */
+			if (!abort && dst->msg[1] == CEC_MSG_INITIATE_ARC &&
+			    (cmd == CEC_MSG_REPORT_ARC_INITIATED ||
+			     cmd == CEC_MSG_REPORT_ARC_TERMINATED) &&
+			    (dst->reply == CEC_MSG_REPORT_ARC_INITIATED ||
+			     dst->reply == CEC_MSG_REPORT_ARC_TERMINATED))
+				dst->reply = cmd;
+
+			/* Does the command match? */
+			if ((abort && cmd != dst->msg[1]) ||
+			    (!abort && cmd != dst->reply))
+				continue;
+
+			/* Does the addressing match? */
+			if (msg_init != cec_msg_destination(dst) &&
+			    !cec_msg_is_broadcast(dst))
+				continue;
+
+			/* We got a reply */
+			memcpy(dst->msg, msg->msg, msg->len);
+			dst->len = msg->len;
+			dst->rx_ts = msg->rx_ts;
+			dst->rx_status = msg->rx_status;
+			if (abort)
+				dst->rx_status |= CEC_RX_STATUS_FEATURE_ABORT;
+			msg->flags = dst->flags;
+			msg->sequence = dst->sequence;
+			/* Remove it from the wait_queue */
+			list_del_init(&data->list);
+
+			/* Cancel the pending timeout work */
+			if (!cancel_delayed_work(&data->work)) {
+				mutex_unlock(&adap->lock);
+				flush_scheduled_work();
+				mutex_lock(&adap->lock);
+			}
+			/*
+			 * Mark this as a reply, provided someone is still
+			 * waiting for the answer.
+			 */
+			if (data->fh)
+				is_reply = true;
+			cec_data_completed(data);
+			break;
+		}
+	}
+	mutex_unlock(&adap->lock);
+
+	/* Pass the message on to any monitoring filehandles */
+	cec_queue_msg_monitor(adap, msg, valid_la);
+
+	/* We're done if it is not for us or a poll message */
+	if (!valid_la || msg->len <= 1)
+		return;
+
+	if (adap->log_addrs.log_addr_mask == 0)
+		return;
+
+	/*
+	 * Process the message on the protocol level. If is_reply is true,
+	 * then cec_receive_notify() won't pass on the reply to the listener(s)
+	 * since that was already done by cec_data_completed() above.
+	 */
+	cec_receive_notify(adap, msg, is_reply);
+}
+EXPORT_SYMBOL_GPL(cec_received_msg_ts);
+
+/* Logical Address Handling */
+
+/*
+ * Attempt to claim a specific logical address.
+ *
+ * This function is called with adap->lock held.
+ */
+static int cec_config_log_addr(struct cec_adapter *adap,
+			       unsigned int idx,
+			       unsigned int log_addr)
+{
+	struct cec_log_addrs *las = &adap->log_addrs;
+	struct cec_msg msg = { };
+	const unsigned int max_retries = 2;
+	unsigned int i;
+	int err;
+
+	if (cec_has_log_addr(adap, log_addr))
+		return 0;
+
+	/* Send poll message */
+	msg.len = 1;
+	msg.msg[0] = (log_addr << 4) | log_addr;
+
+	for (i = 0; i < max_retries; i++) {
+		err = cec_transmit_msg_fh(adap, &msg, NULL, true);
+
+		/*
+		 * While trying to poll the physical address was reset
+		 * and the adapter was unconfigured, so bail out.
+		 */
+		if (adap->phys_addr == CEC_PHYS_ADDR_INVALID)
+			return -EINTR;
+
+		if (err)
+			return err;
+
+		/*
+		 * The message was aborted due to a disconnect or
+		 * unconfigure, just bail out.
+		 */
+		if (msg.tx_status & CEC_TX_STATUS_ABORTED)
+			return -EINTR;
+		if (msg.tx_status & CEC_TX_STATUS_OK)
+			return 0;
+		if (msg.tx_status & CEC_TX_STATUS_NACK)
+			break;
+		/*
+		 * Retry up to max_retries times if the message was neither
+		 * OKed or NACKed. This can happen due to e.g. a Lost
+		 * Arbitration condition.
+		 */
+	}
+
+	/*
+	 * If we are unable to get an OK or a NACK after max_retries attempts
+	 * (and note that each attempt already consists of four polls), then
+	 * then we assume that something is really weird and that it is not a
+	 * good idea to try and claim this logical address.
+	 */
+	if (i == max_retries)
+		return 0;
+
+	/*
+	 * Message not acknowledged, so this logical
+	 * address is free to use.
+	 */
+	err = adap->ops->adap_log_addr(adap, log_addr);
+	if (err)
+		return err;
+
+	las->log_addr[idx] = log_addr;
+	las->log_addr_mask |= 1 << log_addr;
+	adap->phys_addrs[log_addr] = adap->phys_addr;
+	return 1;
+}
+
+/*
+ * Unconfigure the adapter: clear all logical addresses and send
+ * the state changed event.
+ *
+ * This function is called with adap->lock held.
+ */
+static void cec_adap_unconfigure(struct cec_adapter *adap)
+{
+	if (!adap->needs_hpd ||
+	    adap->phys_addr != CEC_PHYS_ADDR_INVALID)
+		WARN_ON(adap->ops->adap_log_addr(adap, CEC_LOG_ADDR_INVALID));
+	adap->log_addrs.log_addr_mask = 0;
+	adap->is_configured = false;
+	memset(adap->phys_addrs, 0xff, sizeof(adap->phys_addrs));
+	cec_flush(adap);
+	wake_up_interruptible(&adap->kthread_waitq);
+	cec_post_state_event(adap);
+}
+
+/*
+ * Attempt to claim the required logical addresses.
+ */
+static int cec_config_thread_func(void *arg)
+{
+	/* The various LAs for each type of device */
+	static const u8 tv_log_addrs[] = {
+		CEC_LOG_ADDR_TV, CEC_LOG_ADDR_SPECIFIC,
+		CEC_LOG_ADDR_INVALID
+	};
+	static const u8 record_log_addrs[] = {
+		CEC_LOG_ADDR_RECORD_1, CEC_LOG_ADDR_RECORD_2,
+		CEC_LOG_ADDR_RECORD_3,
+		CEC_LOG_ADDR_BACKUP_1, CEC_LOG_ADDR_BACKUP_2,
+		CEC_LOG_ADDR_INVALID
+	};
+	static const u8 tuner_log_addrs[] = {
+		CEC_LOG_ADDR_TUNER_1, CEC_LOG_ADDR_TUNER_2,
+		CEC_LOG_ADDR_TUNER_3, CEC_LOG_ADDR_TUNER_4,
+		CEC_LOG_ADDR_BACKUP_1, CEC_LOG_ADDR_BACKUP_2,
+		CEC_LOG_ADDR_INVALID
+	};
+	static const u8 playback_log_addrs[] = {
+		CEC_LOG_ADDR_PLAYBACK_1, CEC_LOG_ADDR_PLAYBACK_2,
+		CEC_LOG_ADDR_PLAYBACK_3,
+		CEC_LOG_ADDR_BACKUP_1, CEC_LOG_ADDR_BACKUP_2,
+		CEC_LOG_ADDR_INVALID
+	};
+	static const u8 audiosystem_log_addrs[] = {
+		CEC_LOG_ADDR_AUDIOSYSTEM,
+		CEC_LOG_ADDR_INVALID
+	};
+	static const u8 specific_use_log_addrs[] = {
+		CEC_LOG_ADDR_SPECIFIC,
+		CEC_LOG_ADDR_BACKUP_1, CEC_LOG_ADDR_BACKUP_2,
+		CEC_LOG_ADDR_INVALID
+	};
+	static const u8 *type2addrs[6] = {
+		[CEC_LOG_ADDR_TYPE_TV] = tv_log_addrs,
+		[CEC_LOG_ADDR_TYPE_RECORD] = record_log_addrs,
+		[CEC_LOG_ADDR_TYPE_TUNER] = tuner_log_addrs,
+		[CEC_LOG_ADDR_TYPE_PLAYBACK] = playback_log_addrs,
+		[CEC_LOG_ADDR_TYPE_AUDIOSYSTEM] = audiosystem_log_addrs,
+		[CEC_LOG_ADDR_TYPE_SPECIFIC] = specific_use_log_addrs,
+	};
+	static const u16 type2mask[] = {
+		[CEC_LOG_ADDR_TYPE_TV] = CEC_LOG_ADDR_MASK_TV,
+		[CEC_LOG_ADDR_TYPE_RECORD] = CEC_LOG_ADDR_MASK_RECORD,
+		[CEC_LOG_ADDR_TYPE_TUNER] = CEC_LOG_ADDR_MASK_TUNER,
+		[CEC_LOG_ADDR_TYPE_PLAYBACK] = CEC_LOG_ADDR_MASK_PLAYBACK,
+		[CEC_LOG_ADDR_TYPE_AUDIOSYSTEM] = CEC_LOG_ADDR_MASK_AUDIOSYSTEM,
+		[CEC_LOG_ADDR_TYPE_SPECIFIC] = CEC_LOG_ADDR_MASK_SPECIFIC,
+	};
+	struct cec_adapter *adap = arg;
+	struct cec_log_addrs *las = &adap->log_addrs;
+	int err;
+	int i, j;
+
+	mutex_lock(&adap->lock);
+	dprintk(1, "physical address: %x.%x.%x.%x, claim %d logical addresses\n",
+		cec_phys_addr_exp(adap->phys_addr), las->num_log_addrs);
+	las->log_addr_mask = 0;
+
+	if (las->log_addr_type[0] == CEC_LOG_ADDR_TYPE_UNREGISTERED)
+		goto configured;
+
+	for (i = 0; i < las->num_log_addrs; i++) {
+		unsigned int type = las->log_addr_type[i];
+		const u8 *la_list;
+		u8 last_la;
+
+		/*
+		 * The TV functionality can only map to physical address 0.
+		 * For any other address, try the Specific functionality
+		 * instead as per the spec.
+		 */
+		if (adap->phys_addr && type == CEC_LOG_ADDR_TYPE_TV)
+			type = CEC_LOG_ADDR_TYPE_SPECIFIC;
+
+		la_list = type2addrs[type];
+		last_la = las->log_addr[i];
+		las->log_addr[i] = CEC_LOG_ADDR_INVALID;
+		if (last_la == CEC_LOG_ADDR_INVALID ||
+		    last_la == CEC_LOG_ADDR_UNREGISTERED ||
+		    !((1 << last_la) & type2mask[type]))
+			last_la = la_list[0];
+
+		err = cec_config_log_addr(adap, i, last_la);
+		if (err > 0) /* Reused last LA */
+			continue;
+
+		if (err < 0)
+			goto unconfigure;
+
+		for (j = 0; la_list[j] != CEC_LOG_ADDR_INVALID; j++) {
+			/* Tried this one already, skip it */
+			if (la_list[j] == last_la)
+				continue;
+			/* The backup addresses are CEC 2.0 specific */
+			if ((la_list[j] == CEC_LOG_ADDR_BACKUP_1 ||
+			     la_list[j] == CEC_LOG_ADDR_BACKUP_2) &&
+			    las->cec_version < CEC_OP_CEC_VERSION_2_0)
+				continue;
+
+			err = cec_config_log_addr(adap, i, la_list[j]);
+			if (err == 0) /* LA is in use */
+				continue;
+			if (err < 0)
+				goto unconfigure;
+			/* Done, claimed an LA */
+			break;
+		}
+
+		if (la_list[j] == CEC_LOG_ADDR_INVALID)
+			dprintk(1, "could not claim LA %d\n", i);
+	}
+
+	if (adap->log_addrs.log_addr_mask == 0 &&
+	    !(las->flags & CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK))
+		goto unconfigure;
+
+configured:
+	if (adap->log_addrs.log_addr_mask == 0) {
+		/* Fall back to unregistered */
+		las->log_addr[0] = CEC_LOG_ADDR_UNREGISTERED;
+		las->log_addr_mask = 1 << las->log_addr[0];
+		for (i = 1; i < las->num_log_addrs; i++)
+			las->log_addr[i] = CEC_LOG_ADDR_INVALID;
+	}
+	for (i = las->num_log_addrs; i < CEC_MAX_LOG_ADDRS; i++)
+		las->log_addr[i] = CEC_LOG_ADDR_INVALID;
+	adap->is_configured = true;
+	adap->is_configuring = false;
+	cec_post_state_event(adap);
+
+	/*
+	 * Now post the Report Features and Report Physical Address broadcast
+	 * messages. Note that these are non-blocking transmits, meaning that
+	 * they are just queued up and once adap->lock is unlocked the main
+	 * thread will kick in and start transmitting these.
+	 *
+	 * If after this function is done (but before one or more of these
+	 * messages are actually transmitted) the CEC adapter is unconfigured,
+	 * then any remaining messages will be dropped by the main thread.
+	 */
+	for (i = 0; i < las->num_log_addrs; i++) {
+		struct cec_msg msg = {};
+
+		if (las->log_addr[i] == CEC_LOG_ADDR_INVALID ||
+		    (las->flags & CEC_LOG_ADDRS_FL_CDC_ONLY))
+			continue;
+
+		msg.msg[0] = (las->log_addr[i] << 4) | 0x0f;
+
+		/* Report Features must come first according to CEC 2.0 */
+		if (las->log_addr[i] != CEC_LOG_ADDR_UNREGISTERED &&
+		    adap->log_addrs.cec_version >= CEC_OP_CEC_VERSION_2_0) {
+			cec_fill_msg_report_features(adap, &msg, i);
+			cec_transmit_msg_fh(adap, &msg, NULL, false);
+		}
+
+		/* Report Physical Address */
+		cec_msg_report_physical_addr(&msg, adap->phys_addr,
+					     las->primary_device_type[i]);
+		dprintk(1, "config: la %d pa %x.%x.%x.%x\n",
+			las->log_addr[i],
+			cec_phys_addr_exp(adap->phys_addr));
+		cec_transmit_msg_fh(adap, &msg, NULL, false);
+
+		/* Report Vendor ID */
+		if (adap->log_addrs.vendor_id != CEC_VENDOR_ID_NONE) {
+			cec_msg_device_vendor_id(&msg,
+						 adap->log_addrs.vendor_id);
+			cec_transmit_msg_fh(adap, &msg, NULL, false);
+		}
+	}
+	adap->kthread_config = NULL;
+	complete(&adap->config_completion);
+	mutex_unlock(&adap->lock);
+	return 0;
+
+unconfigure:
+	for (i = 0; i < las->num_log_addrs; i++)
+		las->log_addr[i] = CEC_LOG_ADDR_INVALID;
+	cec_adap_unconfigure(adap);
+	adap->is_configuring = false;
+	adap->kthread_config = NULL;
+	complete(&adap->config_completion);
+	mutex_unlock(&adap->lock);
+	return 0;
+}
+
+/*
+ * Called from either __cec_s_phys_addr or __cec_s_log_addrs to claim the
+ * logical addresses.
+ *
+ * This function is called with adap->lock held.
+ */
+static void cec_claim_log_addrs(struct cec_adapter *adap, bool block)
+{
+	if (WARN_ON(adap->is_configuring || adap->is_configured))
+		return;
+
+	init_completion(&adap->config_completion);
+
+	/* Ready to kick off the thread */
+	adap->is_configuring = true;
+	adap->kthread_config = kthread_run(cec_config_thread_func, adap,
+					   "ceccfg-%s", adap->name);
+	if (IS_ERR(adap->kthread_config)) {
+		adap->kthread_config = NULL;
+	} else if (block) {
+		mutex_unlock(&adap->lock);
+		wait_for_completion(&adap->config_completion);
+		mutex_lock(&adap->lock);
+	}
+}
+
+/* Set a new physical address and send an event notifying userspace of this.
+ *
+ * This function is called with adap->lock held.
+ */
+void __cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block)
+{
+	if (phys_addr == adap->phys_addr)
+		return;
+	if (phys_addr != CEC_PHYS_ADDR_INVALID && adap->devnode.unregistered)
+		return;
+
+	dprintk(1, "new physical address %x.%x.%x.%x\n",
+		cec_phys_addr_exp(phys_addr));
+	if (phys_addr == CEC_PHYS_ADDR_INVALID ||
+	    adap->phys_addr != CEC_PHYS_ADDR_INVALID) {
+		adap->phys_addr = CEC_PHYS_ADDR_INVALID;
+		cec_post_state_event(adap);
+		cec_adap_unconfigure(adap);
+		/* Disabling monitor all mode should always succeed */
+		if (adap->monitor_all_cnt)
+			WARN_ON(call_op(adap, adap_monitor_all_enable, false));
+		mutex_lock(&adap->devnode.lock);
+		if (adap->needs_hpd || list_empty(&adap->devnode.fhs)) {
+			WARN_ON(adap->ops->adap_enable(adap, false));
+			adap->transmit_in_progress = false;
+			wake_up_interruptible(&adap->kthread_waitq);
+		}
+		mutex_unlock(&adap->devnode.lock);
+		if (phys_addr == CEC_PHYS_ADDR_INVALID)
+			return;
+	}
+
+	mutex_lock(&adap->devnode.lock);
+	adap->last_initiator = 0xff;
+	adap->transmit_in_progress = false;
+
+	if ((adap->needs_hpd || list_empty(&adap->devnode.fhs)) &&
+	    adap->ops->adap_enable(adap, true)) {
+		mutex_unlock(&adap->devnode.lock);
+		return;
+	}
+
+	if (adap->monitor_all_cnt &&
+	    call_op(adap, adap_monitor_all_enable, true)) {
+		if (adap->needs_hpd || list_empty(&adap->devnode.fhs))
+			WARN_ON(adap->ops->adap_enable(adap, false));
+		mutex_unlock(&adap->devnode.lock);
+		return;
+	}
+	mutex_unlock(&adap->devnode.lock);
+
+	adap->phys_addr = phys_addr;
+	cec_post_state_event(adap);
+	if (adap->log_addrs.num_log_addrs)
+		cec_claim_log_addrs(adap, block);
+}
+
+void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, bool block)
+{
+	if (IS_ERR_OR_NULL(adap))
+		return;
+
+	mutex_lock(&adap->lock);
+	__cec_s_phys_addr(adap, phys_addr, block);
+	mutex_unlock(&adap->lock);
+}
+EXPORT_SYMBOL_GPL(cec_s_phys_addr);
+
+void cec_s_phys_addr_from_edid(struct cec_adapter *adap,
+			       const struct edid *edid)
+{
+	u16 pa = CEC_PHYS_ADDR_INVALID;
+
+	if (edid && edid->extensions)
+		pa = cec_get_edid_phys_addr((const u8 *)edid,
+				EDID_LENGTH * (edid->extensions + 1), NULL);
+	cec_s_phys_addr(adap, pa, false);
+}
+EXPORT_SYMBOL_GPL(cec_s_phys_addr_from_edid);
+
+/*
+ * Called from either the ioctl or a driver to set the logical addresses.
+ *
+ * This function is called with adap->lock held.
+ */
+int __cec_s_log_addrs(struct cec_adapter *adap,
+		      struct cec_log_addrs *log_addrs, bool block)
+{
+	u16 type_mask = 0;
+	int i;
+
+	if (adap->devnode.unregistered)
+		return -ENODEV;
+
+	if (!log_addrs || log_addrs->num_log_addrs == 0) {
+		cec_adap_unconfigure(adap);
+		adap->log_addrs.num_log_addrs = 0;
+		for (i = 0; i < CEC_MAX_LOG_ADDRS; i++)
+			adap->log_addrs.log_addr[i] = CEC_LOG_ADDR_INVALID;
+		adap->log_addrs.osd_name[0] = '\0';
+		adap->log_addrs.vendor_id = CEC_VENDOR_ID_NONE;
+		adap->log_addrs.cec_version = CEC_OP_CEC_VERSION_2_0;
+		return 0;
+	}
+
+	if (log_addrs->flags & CEC_LOG_ADDRS_FL_CDC_ONLY) {
+		/*
+		 * Sanitize log_addrs fields if a CDC-Only device is
+		 * requested.
+		 */
+		log_addrs->num_log_addrs = 1;
+		log_addrs->osd_name[0] = '\0';
+		log_addrs->vendor_id = CEC_VENDOR_ID_NONE;
+		log_addrs->log_addr_type[0] = CEC_LOG_ADDR_TYPE_UNREGISTERED;
+		/*
+		 * This is just an internal convention since a CDC-Only device
+		 * doesn't have to be a switch. But switches already use
+		 * unregistered, so it makes some kind of sense to pick this
+		 * as the primary device. Since a CDC-Only device never sends
+		 * any 'normal' CEC messages this primary device type is never
+		 * sent over the CEC bus.
+		 */
+		log_addrs->primary_device_type[0] = CEC_OP_PRIM_DEVTYPE_SWITCH;
+		log_addrs->all_device_types[0] = 0;
+		log_addrs->features[0][0] = 0;
+		log_addrs->features[0][1] = 0;
+	}
+
+	/* Ensure the osd name is 0-terminated */
+	log_addrs->osd_name[sizeof(log_addrs->osd_name) - 1] = '\0';
+
+	/* Sanity checks */
+	if (log_addrs->num_log_addrs > adap->available_log_addrs) {
+		dprintk(1, "num_log_addrs > %d\n", adap->available_log_addrs);
+		return -EINVAL;
+	}
+
+	/*
+	 * Vendor ID is a 24 bit number, so check if the value is
+	 * within the correct range.
+	 */
+	if (log_addrs->vendor_id != CEC_VENDOR_ID_NONE &&
+	    (log_addrs->vendor_id & 0xff000000) != 0) {
+		dprintk(1, "invalid vendor ID\n");
+		return -EINVAL;
+	}
+
+	if (log_addrs->cec_version != CEC_OP_CEC_VERSION_1_4 &&
+	    log_addrs->cec_version != CEC_OP_CEC_VERSION_2_0) {
+		dprintk(1, "invalid CEC version\n");
+		return -EINVAL;
+	}
+
+	if (log_addrs->num_log_addrs > 1)
+		for (i = 0; i < log_addrs->num_log_addrs; i++)
+			if (log_addrs->log_addr_type[i] ==
+					CEC_LOG_ADDR_TYPE_UNREGISTERED) {
+				dprintk(1, "num_log_addrs > 1 can't be combined with unregistered LA\n");
+				return -EINVAL;
+			}
+
+	for (i = 0; i < log_addrs->num_log_addrs; i++) {
+		const u8 feature_sz = ARRAY_SIZE(log_addrs->features[0]);
+		u8 *features = log_addrs->features[i];
+		bool op_is_dev_features = false;
+		unsigned j;
+
+		log_addrs->log_addr[i] = CEC_LOG_ADDR_INVALID;
+		if (log_addrs->log_addr_type[i] > CEC_LOG_ADDR_TYPE_UNREGISTERED) {
+			dprintk(1, "unknown logical address type\n");
+			return -EINVAL;
+		}
+		if (type_mask & (1 << log_addrs->log_addr_type[i])) {
+			dprintk(1, "duplicate logical address type\n");
+			return -EINVAL;
+		}
+		type_mask |= 1 << log_addrs->log_addr_type[i];
+		if ((type_mask & (1 << CEC_LOG_ADDR_TYPE_RECORD)) &&
+		    (type_mask & (1 << CEC_LOG_ADDR_TYPE_PLAYBACK))) {
+			/* Record already contains the playback functionality */
+			dprintk(1, "invalid record + playback combination\n");
+			return -EINVAL;
+		}
+		if (log_addrs->primary_device_type[i] >
+					CEC_OP_PRIM_DEVTYPE_PROCESSOR) {
+			dprintk(1, "unknown primary device type\n");
+			return -EINVAL;
+		}
+		if (log_addrs->primary_device_type[i] == 2) {
+			dprintk(1, "invalid primary device type\n");
+			return -EINVAL;
+		}
+		for (j = 0; j < feature_sz; j++) {
+			if ((features[j] & 0x80) == 0) {
+				if (op_is_dev_features)
+					break;
+				op_is_dev_features = true;
+			}
+		}
+		if (!op_is_dev_features || j == feature_sz) {
+			dprintk(1, "malformed features\n");
+			return -EINVAL;
+		}
+		/* Zero unused part of the feature array */
+		memset(features + j + 1, 0, feature_sz - j - 1);
+	}
+
+	if (log_addrs->cec_version >= CEC_OP_CEC_VERSION_2_0) {
+		if (log_addrs->num_log_addrs > 2) {
+			dprintk(1, "CEC 2.0 allows no more than 2 logical addresses\n");
+			return -EINVAL;
+		}
+		if (log_addrs->num_log_addrs == 2) {
+			if (!(type_mask & ((1 << CEC_LOG_ADDR_TYPE_AUDIOSYSTEM) |
+					   (1 << CEC_LOG_ADDR_TYPE_TV)))) {
+				dprintk(1, "two LAs is only allowed for audiosystem and TV\n");
+				return -EINVAL;
+			}
+			if (!(type_mask & ((1 << CEC_LOG_ADDR_TYPE_PLAYBACK) |
+					   (1 << CEC_LOG_ADDR_TYPE_RECORD)))) {
+				dprintk(1, "an audiosystem/TV can only be combined with record or playback\n");
+				return -EINVAL;
+			}
+		}
+	}
+
+	/* Zero unused LAs */
+	for (i = log_addrs->num_log_addrs; i < CEC_MAX_LOG_ADDRS; i++) {
+		log_addrs->primary_device_type[i] = 0;
+		log_addrs->log_addr_type[i] = 0;
+		log_addrs->all_device_types[i] = 0;
+		memset(log_addrs->features[i], 0,
+		       sizeof(log_addrs->features[i]));
+	}
+
+	log_addrs->log_addr_mask = adap->log_addrs.log_addr_mask;
+	adap->log_addrs = *log_addrs;
+	if (adap->phys_addr != CEC_PHYS_ADDR_INVALID)
+		cec_claim_log_addrs(adap, block);
+	return 0;
+}
+
+int cec_s_log_addrs(struct cec_adapter *adap,
+		    struct cec_log_addrs *log_addrs, bool block)
+{
+	int err;
+
+	mutex_lock(&adap->lock);
+	err = __cec_s_log_addrs(adap, log_addrs, block);
+	mutex_unlock(&adap->lock);
+	return err;
+}
+EXPORT_SYMBOL_GPL(cec_s_log_addrs);
+
+/* High-level core CEC message handling */
+
+/* Fill in the Report Features message */
+static void cec_fill_msg_report_features(struct cec_adapter *adap,
+					 struct cec_msg *msg,
+					 unsigned int la_idx)
+{
+	const struct cec_log_addrs *las = &adap->log_addrs;
+	const u8 *features = las->features[la_idx];
+	bool op_is_dev_features = false;
+	unsigned int idx;
+
+	/* Report Features */
+	msg->msg[0] = (las->log_addr[la_idx] << 4) | 0x0f;
+	msg->len = 4;
+	msg->msg[1] = CEC_MSG_REPORT_FEATURES;
+	msg->msg[2] = adap->log_addrs.cec_version;
+	msg->msg[3] = las->all_device_types[la_idx];
+
+	/* Write RC Profiles first, then Device Features */
+	for (idx = 0; idx < ARRAY_SIZE(las->features[0]); idx++) {
+		msg->msg[msg->len++] = features[idx];
+		if ((features[idx] & CEC_OP_FEAT_EXT) == 0) {
+			if (op_is_dev_features)
+				break;
+			op_is_dev_features = true;
+		}
+	}
+}
+
+/* Transmit the Feature Abort message */
+static int cec_feature_abort_reason(struct cec_adapter *adap,
+				    struct cec_msg *msg, u8 reason)
+{
+	struct cec_msg tx_msg = { };
+
+	/*
+	 * Don't reply with CEC_MSG_FEATURE_ABORT to a CEC_MSG_FEATURE_ABORT
+	 * message!
+	 */
+	if (msg->msg[1] == CEC_MSG_FEATURE_ABORT)
+		return 0;
+	/* Don't Feature Abort messages from 'Unregistered' */
+	if (cec_msg_initiator(msg) == CEC_LOG_ADDR_UNREGISTERED)
+		return 0;
+	cec_msg_set_reply_to(&tx_msg, msg);
+	cec_msg_feature_abort(&tx_msg, msg->msg[1], reason);
+	return cec_transmit_msg(adap, &tx_msg, false);
+}
+
+static int cec_feature_abort(struct cec_adapter *adap, struct cec_msg *msg)
+{
+	return cec_feature_abort_reason(adap, msg,
+					CEC_OP_ABORT_UNRECOGNIZED_OP);
+}
+
+static int cec_feature_refused(struct cec_adapter *adap, struct cec_msg *msg)
+{
+	return cec_feature_abort_reason(adap, msg,
+					CEC_OP_ABORT_REFUSED);
+}
+
+/*
+ * Called when a CEC message is received. This function will do any
+ * necessary core processing. The is_reply bool is true if this message
+ * is a reply to an earlier transmit.
+ *
+ * The message is either a broadcast message or a valid directed message.
+ */
+static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
+			      bool is_reply)
+{
+	bool is_broadcast = cec_msg_is_broadcast(msg);
+	u8 dest_laddr = cec_msg_destination(msg);
+	u8 init_laddr = cec_msg_initiator(msg);
+	u8 devtype = cec_log_addr2dev(adap, dest_laddr);
+	int la_idx = cec_log_addr2idx(adap, dest_laddr);
+	bool from_unregistered = init_laddr == 0xf;
+	struct cec_msg tx_cec_msg = { };
+
+	dprintk(2, "%s: %*ph\n", __func__, msg->len, msg->msg);
+
+	/* If this is a CDC-Only device, then ignore any non-CDC messages */
+	if (cec_is_cdc_only(&adap->log_addrs) &&
+	    msg->msg[1] != CEC_MSG_CDC_MESSAGE)
+		return 0;
+
+	if (adap->ops->received) {
+		/* Allow drivers to process the message first */
+		if (adap->ops->received(adap, msg) != -ENOMSG)
+			return 0;
+	}
+
+	/*
+	 * REPORT_PHYSICAL_ADDR, CEC_MSG_USER_CONTROL_PRESSED and
+	 * CEC_MSG_USER_CONTROL_RELEASED messages always have to be
+	 * handled by the CEC core, even if the passthrough mode is on.
+	 * The others are just ignored if passthrough mode is on.
+	 */
+	switch (msg->msg[1]) {
+	case CEC_MSG_GET_CEC_VERSION:
+	case CEC_MSG_ABORT:
+	case CEC_MSG_GIVE_DEVICE_POWER_STATUS:
+	case CEC_MSG_GIVE_OSD_NAME:
+		/*
+		 * These messages reply with a directed message, so ignore if
+		 * the initiator is Unregistered.
+		 */
+		if (!adap->passthrough && from_unregistered)
+			return 0;
+		/* Fall through */
+	case CEC_MSG_GIVE_DEVICE_VENDOR_ID:
+	case CEC_MSG_GIVE_FEATURES:
+	case CEC_MSG_GIVE_PHYSICAL_ADDR:
+		/*
+		 * Skip processing these messages if the passthrough mode
+		 * is on.
+		 */
+		if (adap->passthrough)
+			goto skip_processing;
+		/* Ignore if addressing is wrong */
+		if (is_broadcast)
+			return 0;
+		break;
+
+	case CEC_MSG_USER_CONTROL_PRESSED:
+	case CEC_MSG_USER_CONTROL_RELEASED:
+		/* Wrong addressing mode: don't process */
+		if (is_broadcast || from_unregistered)
+			goto skip_processing;
+		break;
+
+	case CEC_MSG_REPORT_PHYSICAL_ADDR:
+		/*
+		 * This message is always processed, regardless of the
+		 * passthrough setting.
+		 *
+		 * Exception: don't process if wrong addressing mode.
+		 */
+		if (!is_broadcast)
+			goto skip_processing;
+		break;
+
+	default:
+		break;
+	}
+
+	cec_msg_set_reply_to(&tx_cec_msg, msg);
+
+	switch (msg->msg[1]) {
+	/* The following messages are processed but still passed through */
+	case CEC_MSG_REPORT_PHYSICAL_ADDR: {
+		u16 pa = (msg->msg[2] << 8) | msg->msg[3];
+
+		if (!from_unregistered)
+			adap->phys_addrs[init_laddr] = pa;
+		dprintk(1, "reported physical address %x.%x.%x.%x for logical address %d\n",
+			cec_phys_addr_exp(pa), init_laddr);
+		break;
+	}
+
+	case CEC_MSG_USER_CONTROL_PRESSED:
+		if (!(adap->capabilities & CEC_CAP_RC) ||
+		    !(adap->log_addrs.flags & CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU))
+			break;
+
+#ifdef CONFIG_MEDIA_CEC_RC
+		switch (msg->msg[2]) {
+		/*
+		 * Play function, this message can have variable length
+		 * depending on the specific play function that is used.
+		 */
+		case 0x60:
+			if (msg->len == 2)
+				rc_keydown(adap->rc, RC_PROTO_CEC,
+					   msg->msg[2], 0);
+			else
+				rc_keydown(adap->rc, RC_PROTO_CEC,
+					   msg->msg[2] << 8 | msg->msg[3], 0);
+			break;
+		/*
+		 * Other function messages that are not handled.
+		 * Currently the RC framework does not allow to supply an
+		 * additional parameter to a keypress. These "keys" contain
+		 * other information such as channel number, an input number
+		 * etc.
+		 * For the time being these messages are not processed by the
+		 * framework and are simply forwarded to the user space.
+		 */
+		case 0x56: case 0x57:
+		case 0x67: case 0x68: case 0x69: case 0x6a:
+			break;
+		default:
+			rc_keydown(adap->rc, RC_PROTO_CEC, msg->msg[2], 0);
+			break;
+		}
+#endif
+		break;
+
+	case CEC_MSG_USER_CONTROL_RELEASED:
+		if (!(adap->capabilities & CEC_CAP_RC) ||
+		    !(adap->log_addrs.flags & CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU))
+			break;
+#ifdef CONFIG_MEDIA_CEC_RC
+		rc_keyup(adap->rc);
+#endif
+		break;
+
+	/*
+	 * The remaining messages are only processed if the passthrough mode
+	 * is off.
+	 */
+	case CEC_MSG_GET_CEC_VERSION:
+		cec_msg_cec_version(&tx_cec_msg, adap->log_addrs.cec_version);
+		return cec_transmit_msg(adap, &tx_cec_msg, false);
+
+	case CEC_MSG_GIVE_PHYSICAL_ADDR:
+		/* Do nothing for CEC switches using addr 15 */
+		if (devtype == CEC_OP_PRIM_DEVTYPE_SWITCH && dest_laddr == 15)
+			return 0;
+		cec_msg_report_physical_addr(&tx_cec_msg, adap->phys_addr, devtype);
+		return cec_transmit_msg(adap, &tx_cec_msg, false);
+
+	case CEC_MSG_GIVE_DEVICE_VENDOR_ID:
+		if (adap->log_addrs.vendor_id == CEC_VENDOR_ID_NONE)
+			return cec_feature_abort(adap, msg);
+		cec_msg_device_vendor_id(&tx_cec_msg, adap->log_addrs.vendor_id);
+		return cec_transmit_msg(adap, &tx_cec_msg, false);
+
+	case CEC_MSG_ABORT:
+		/* Do nothing for CEC switches */
+		if (devtype == CEC_OP_PRIM_DEVTYPE_SWITCH)
+			return 0;
+		return cec_feature_refused(adap, msg);
+
+	case CEC_MSG_GIVE_OSD_NAME: {
+		if (adap->log_addrs.osd_name[0] == 0)
+			return cec_feature_abort(adap, msg);
+		cec_msg_set_osd_name(&tx_cec_msg, adap->log_addrs.osd_name);
+		return cec_transmit_msg(adap, &tx_cec_msg, false);
+	}
+
+	case CEC_MSG_GIVE_FEATURES:
+		if (adap->log_addrs.cec_version < CEC_OP_CEC_VERSION_2_0)
+			return cec_feature_abort(adap, msg);
+		cec_fill_msg_report_features(adap, &tx_cec_msg, la_idx);
+		return cec_transmit_msg(adap, &tx_cec_msg, false);
+
+	default:
+		/*
+		 * Unprocessed messages are aborted if userspace isn't doing
+		 * any processing either.
+		 */
+		if (!is_broadcast && !is_reply && !adap->follower_cnt &&
+		    !adap->cec_follower && msg->msg[1] != CEC_MSG_FEATURE_ABORT)
+			return cec_feature_abort(adap, msg);
+		break;
+	}
+
+skip_processing:
+	/* If this was a reply, then we're done, unless otherwise specified */
+	if (is_reply && !(msg->flags & CEC_MSG_FL_REPLY_TO_FOLLOWERS))
+		return 0;
+
+	/*
+	 * Send to the exclusive follower if there is one, otherwise send
+	 * to all followers.
+	 */
+	if (adap->cec_follower)
+		cec_queue_msg_fh(adap->cec_follower, msg);
+	else
+		cec_queue_msg_followers(adap, msg);
+	return 0;
+}
+
+/*
+ * Helper functions to keep track of the 'monitor all' use count.
+ *
+ * These functions are called with adap->lock held.
+ */
+int cec_monitor_all_cnt_inc(struct cec_adapter *adap)
+{
+	int ret = 0;
+
+	if (adap->monitor_all_cnt == 0)
+		ret = call_op(adap, adap_monitor_all_enable, 1);
+	if (ret == 0)
+		adap->monitor_all_cnt++;
+	return ret;
+}
+
+void cec_monitor_all_cnt_dec(struct cec_adapter *adap)
+{
+	adap->monitor_all_cnt--;
+	if (adap->monitor_all_cnt == 0)
+		WARN_ON(call_op(adap, adap_monitor_all_enable, 0));
+}
+
+/*
+ * Helper functions to keep track of the 'monitor pin' use count.
+ *
+ * These functions are called with adap->lock held.
+ */
+int cec_monitor_pin_cnt_inc(struct cec_adapter *adap)
+{
+	int ret = 0;
+
+	if (adap->monitor_pin_cnt == 0)
+		ret = call_op(adap, adap_monitor_pin_enable, 1);
+	if (ret == 0)
+		adap->monitor_pin_cnt++;
+	return ret;
+}
+
+void cec_monitor_pin_cnt_dec(struct cec_adapter *adap)
+{
+	adap->monitor_pin_cnt--;
+	if (adap->monitor_pin_cnt == 0)
+		WARN_ON(call_op(adap, adap_monitor_pin_enable, 0));
+}
+
+#ifdef CONFIG_DEBUG_FS
+/*
+ * Log the current state of the CEC adapter.
+ * Very useful for debugging.
+ */
+int cec_adap_status(struct seq_file *file, void *priv)
+{
+	struct cec_adapter *adap = dev_get_drvdata(file->private);
+	struct cec_data *data;
+
+	mutex_lock(&adap->lock);
+	seq_printf(file, "configured: %d\n", adap->is_configured);
+	seq_printf(file, "configuring: %d\n", adap->is_configuring);
+	seq_printf(file, "phys_addr: %x.%x.%x.%x\n",
+		   cec_phys_addr_exp(adap->phys_addr));
+	seq_printf(file, "number of LAs: %d\n", adap->log_addrs.num_log_addrs);
+	seq_printf(file, "LA mask: 0x%04x\n", adap->log_addrs.log_addr_mask);
+	if (adap->cec_follower)
+		seq_printf(file, "has CEC follower%s\n",
+			   adap->passthrough ? " (in passthrough mode)" : "");
+	if (adap->cec_initiator)
+		seq_puts(file, "has CEC initiator\n");
+	if (adap->monitor_all_cnt)
+		seq_printf(file, "file handles in Monitor All mode: %u\n",
+			   adap->monitor_all_cnt);
+	if (adap->tx_timeouts) {
+		seq_printf(file, "transmit timeouts: %u\n",
+			   adap->tx_timeouts);
+		adap->tx_timeouts = 0;
+	}
+	data = adap->transmitting;
+	if (data)
+		seq_printf(file, "transmitting message: %*ph (reply: %02x, timeout: %ums)\n",
+			   data->msg.len, data->msg.msg, data->msg.reply,
+			   data->msg.timeout);
+	seq_printf(file, "pending transmits: %u\n", adap->transmit_queue_sz);
+	list_for_each_entry(data, &adap->transmit_queue, list) {
+		seq_printf(file, "queued tx message: %*ph (reply: %02x, timeout: %ums)\n",
+			   data->msg.len, data->msg.msg, data->msg.reply,
+			   data->msg.timeout);
+	}
+	list_for_each_entry(data, &adap->wait_queue, list) {
+		seq_printf(file, "message waiting for reply: %*ph (reply: %02x, timeout: %ums)\n",
+			   data->msg.len, data->msg.msg, data->msg.reply,
+			   data->msg.timeout);
+	}
+
+	call_void_op(adap, adap_status, file);
+	mutex_unlock(&adap->lock);
+	return 0;
+}
+#endif