Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1589 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/af9013.c b/drivers/media/dvb-frontends/af9013.c
new file mode 100644
index 000000000..35a93b251
--- /dev/null
+++ b/drivers/media/dvb-frontends/af9013.c
@@ -0,0 +1,1589 @@
+/*
+ * Afatech AF9013 demodulator driver
+ *
+ * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
+ *
+ * Thanks to Afatech who kindly provided information.
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ */
+
+#include "af9013_priv.h"
+
+struct af9013_state {
+	struct i2c_client *client;
+	struct regmap *regmap;
+	struct i2c_mux_core *muxc;
+	struct dvb_frontend fe;
+	u32 clk;
+	u8 tuner;
+	u32 if_frequency;
+	u8 ts_mode;
+	u8 ts_output_pin;
+	bool spec_inv;
+	u8 api_version[4];
+	u8 gpio[4];
+
+	u32 bandwidth_hz;
+	enum fe_status fe_status;
+	/* RF and IF AGC limits used for signal strength calc */
+	u8 strength_en, rf_agc_50, rf_agc_80, if_agc_50, if_agc_80;
+	unsigned long set_frontend_jiffies;
+	unsigned long read_status_jiffies;
+	unsigned long strength_jiffies;
+	unsigned long cnr_jiffies;
+	unsigned long ber_ucb_jiffies;
+	u16 dvbv3_snr;
+	u16 dvbv3_strength;
+	u32 dvbv3_ber;
+	u32 dvbv3_ucblocks;
+	bool first_tune;
+};
+
+static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval)
+{
+	struct i2c_client *client = state->client;
+	int ret;
+	u8 pos;
+	u16 addr;
+
+	dev_dbg(&client->dev, "gpio %u, gpioval %02x\n", gpio, gpioval);
+
+	/*
+	 * GPIO0 & GPIO1 0xd735
+	 * GPIO2 & GPIO3 0xd736
+	 */
+
+	switch (gpio) {
+	case 0:
+	case 1:
+		addr = 0xd735;
+		break;
+	case 2:
+	case 3:
+		addr = 0xd736;
+		break;
+
+	default:
+		ret = -EINVAL;
+		goto err;
+	}
+
+	switch (gpio) {
+	case 0:
+	case 2:
+		pos = 0;
+		break;
+	case 1:
+	case 3:
+	default:
+		pos = 4;
+		break;
+	}
+
+	ret = regmap_update_bits(state->regmap, addr, 0x0f << pos,
+				 gpioval << pos);
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	dev_dbg(&client->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int af9013_get_tune_settings(struct dvb_frontend *fe,
+	struct dvb_frontend_tune_settings *fesettings)
+{
+	fesettings->min_delay_ms = 800;
+	fesettings->step_size = 0;
+	fesettings->max_drift = 0;
+
+	return 0;
+}
+
+static int af9013_set_frontend(struct dvb_frontend *fe)
+{
+	struct af9013_state *state = fe->demodulator_priv;
+	struct i2c_client *client = state->client;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	int ret, i, sampling_freq;
+	bool auto_mode, spec_inv;
+	u8 buf[6];
+	u32 if_frequency, freq_cw;
+
+	dev_dbg(&client->dev, "frequency %u, bandwidth_hz %u\n",
+		c->frequency, c->bandwidth_hz);
+
+	/* program tuner */
+	if (fe->ops.tuner_ops.set_params) {
+		ret = fe->ops.tuner_ops.set_params(fe);
+		if (ret)
+			goto err;
+	}
+
+	/* program CFOE coefficients */
+	if (c->bandwidth_hz != state->bandwidth_hz) {
+		for (i = 0; i < ARRAY_SIZE(coeff_lut); i++) {
+			if (coeff_lut[i].clock == state->clk &&
+				coeff_lut[i].bandwidth_hz == c->bandwidth_hz) {
+				break;
+			}
+		}
+
+		/* Return an error if can't find bandwidth or the right clock */
+		if (i == ARRAY_SIZE(coeff_lut)) {
+			ret = -EINVAL;
+			goto err;
+		}
+
+		ret = regmap_bulk_write(state->regmap, 0xae00, coeff_lut[i].val,
+					sizeof(coeff_lut[i].val));
+		if (ret)
+			goto err;
+	}
+
+	/* program frequency control */
+	if (c->bandwidth_hz != state->bandwidth_hz || state->first_tune) {
+		/* get used IF frequency */
+		if (fe->ops.tuner_ops.get_if_frequency) {
+			ret = fe->ops.tuner_ops.get_if_frequency(fe,
+								 &if_frequency);
+			if (ret)
+				goto err;
+		} else {
+			if_frequency = state->if_frequency;
+		}
+
+		dev_dbg(&client->dev, "if_frequency %u\n", if_frequency);
+
+		sampling_freq = if_frequency;
+
+		while (sampling_freq > (state->clk / 2))
+			sampling_freq -= state->clk;
+
+		if (sampling_freq < 0) {
+			sampling_freq *= -1;
+			spec_inv = state->spec_inv;
+		} else {
+			spec_inv = !state->spec_inv;
+		}
+
+		freq_cw = DIV_ROUND_CLOSEST_ULL((u64)sampling_freq * 0x800000,
+						state->clk);
+
+		if (spec_inv)
+			freq_cw = 0x800000 - freq_cw;
+
+		buf[0] = (freq_cw >>  0) & 0xff;
+		buf[1] = (freq_cw >>  8) & 0xff;
+		buf[2] = (freq_cw >> 16) & 0x7f;
+
+		freq_cw = 0x800000 - freq_cw;
+
+		buf[3] = (freq_cw >>  0) & 0xff;
+		buf[4] = (freq_cw >>  8) & 0xff;
+		buf[5] = (freq_cw >> 16) & 0x7f;
+
+		ret = regmap_bulk_write(state->regmap, 0xd140, buf, 3);
+		if (ret)
+			goto err;
+
+		ret = regmap_bulk_write(state->regmap, 0x9be7, buf, 6);
+		if (ret)
+			goto err;
+	}
+
+	/* clear TPS lock flag */
+	ret = regmap_update_bits(state->regmap, 0xd330, 0x08, 0x08);
+	if (ret)
+		goto err;
+
+	/* clear MPEG2 lock flag */
+	ret = regmap_update_bits(state->regmap, 0xd507, 0x40, 0x00);
+	if (ret)
+		goto err;
+
+	/* empty channel function */
+	ret = regmap_update_bits(state->regmap, 0x9bfe, 0x01, 0x00);
+	if (ret)
+		goto err;
+
+	/* empty DVB-T channel function */
+	ret = regmap_update_bits(state->regmap, 0x9bc2, 0x01, 0x00);
+	if (ret)
+		goto err;
+
+	/* transmission parameters */
+	auto_mode = false;
+	memset(buf, 0, 3);
+
+	switch (c->transmission_mode) {
+	case TRANSMISSION_MODE_AUTO:
+		auto_mode = true;
+		break;
+	case TRANSMISSION_MODE_2K:
+		break;
+	case TRANSMISSION_MODE_8K:
+		buf[0] |= (1 << 0);
+		break;
+	default:
+		dev_dbg(&client->dev, "invalid transmission_mode\n");
+		auto_mode = true;
+	}
+
+	switch (c->guard_interval) {
+	case GUARD_INTERVAL_AUTO:
+		auto_mode = true;
+		break;
+	case GUARD_INTERVAL_1_32:
+		break;
+	case GUARD_INTERVAL_1_16:
+		buf[0] |= (1 << 2);
+		break;
+	case GUARD_INTERVAL_1_8:
+		buf[0] |= (2 << 2);
+		break;
+	case GUARD_INTERVAL_1_4:
+		buf[0] |= (3 << 2);
+		break;
+	default:
+		dev_dbg(&client->dev, "invalid guard_interval\n");
+		auto_mode = true;
+	}
+
+	switch (c->hierarchy) {
+	case HIERARCHY_AUTO:
+		auto_mode = true;
+		break;
+	case HIERARCHY_NONE:
+		break;
+	case HIERARCHY_1:
+		buf[0] |= (1 << 4);
+		break;
+	case HIERARCHY_2:
+		buf[0] |= (2 << 4);
+		break;
+	case HIERARCHY_4:
+		buf[0] |= (3 << 4);
+		break;
+	default:
+		dev_dbg(&client->dev, "invalid hierarchy\n");
+		auto_mode = true;
+	}
+
+	switch (c->modulation) {
+	case QAM_AUTO:
+		auto_mode = true;
+		break;
+	case QPSK:
+		break;
+	case QAM_16:
+		buf[1] |= (1 << 6);
+		break;
+	case QAM_64:
+		buf[1] |= (2 << 6);
+		break;
+	default:
+		dev_dbg(&client->dev, "invalid modulation\n");
+		auto_mode = true;
+	}
+
+	/* Use HP. How and which case we can switch to LP? */
+	buf[1] |= (1 << 4);
+
+	switch (c->code_rate_HP) {
+	case FEC_AUTO:
+		auto_mode = true;
+		break;
+	case FEC_1_2:
+		break;
+	case FEC_2_3:
+		buf[2] |= (1 << 0);
+		break;
+	case FEC_3_4:
+		buf[2] |= (2 << 0);
+		break;
+	case FEC_5_6:
+		buf[2] |= (3 << 0);
+		break;
+	case FEC_7_8:
+		buf[2] |= (4 << 0);
+		break;
+	default:
+		dev_dbg(&client->dev, "invalid code_rate_HP\n");
+		auto_mode = true;
+	}
+
+	switch (c->code_rate_LP) {
+	case FEC_AUTO:
+		auto_mode = true;
+		break;
+	case FEC_1_2:
+		break;
+	case FEC_2_3:
+		buf[2] |= (1 << 3);
+		break;
+	case FEC_3_4:
+		buf[2] |= (2 << 3);
+		break;
+	case FEC_5_6:
+		buf[2] |= (3 << 3);
+		break;
+	case FEC_7_8:
+		buf[2] |= (4 << 3);
+		break;
+	case FEC_NONE:
+		break;
+	default:
+		dev_dbg(&client->dev, "invalid code_rate_LP\n");
+		auto_mode = true;
+	}
+
+	switch (c->bandwidth_hz) {
+	case 6000000:
+		break;
+	case 7000000:
+		buf[1] |= (1 << 2);
+		break;
+	case 8000000:
+		buf[1] |= (2 << 2);
+		break;
+	default:
+		dev_dbg(&client->dev, "invalid bandwidth_hz\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ret = regmap_bulk_write(state->regmap, 0xd3c0, buf, 3);
+	if (ret)
+		goto err;
+
+	if (auto_mode) {
+		/* clear easy mode flag */
+		ret = regmap_write(state->regmap, 0xaefd, 0x00);
+		if (ret)
+			goto err;
+
+		dev_dbg(&client->dev, "auto params\n");
+	} else {
+		/* set easy mode flag */
+		ret = regmap_write(state->regmap, 0xaefd, 0x01);
+		if (ret)
+			goto err;
+
+		ret = regmap_write(state->regmap, 0xaefe, 0x00);
+		if (ret)
+			goto err;
+
+		dev_dbg(&client->dev, "manual params\n");
+	}
+
+	/* Reset FSM */
+	ret = regmap_write(state->regmap, 0xffff, 0x00);
+	if (ret)
+		goto err;
+
+	state->bandwidth_hz = c->bandwidth_hz;
+	state->set_frontend_jiffies = jiffies;
+	state->first_tune = false;
+
+	return 0;
+err:
+	dev_dbg(&client->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int af9013_get_frontend(struct dvb_frontend *fe,
+			       struct dtv_frontend_properties *c)
+{
+	struct af9013_state *state = fe->demodulator_priv;
+	struct i2c_client *client = state->client;
+	int ret;
+	u8 buf[3];
+
+	dev_dbg(&client->dev, "\n");
+
+	ret = regmap_bulk_read(state->regmap, 0xd3c0, buf, 3);
+	if (ret)
+		goto err;
+
+	switch ((buf[1] >> 6) & 3) {
+	case 0:
+		c->modulation = QPSK;
+		break;
+	case 1:
+		c->modulation = QAM_16;
+		break;
+	case 2:
+		c->modulation = QAM_64;
+		break;
+	}
+
+	switch ((buf[0] >> 0) & 3) {
+	case 0:
+		c->transmission_mode = TRANSMISSION_MODE_2K;
+		break;
+	case 1:
+		c->transmission_mode = TRANSMISSION_MODE_8K;
+	}
+
+	switch ((buf[0] >> 2) & 3) {
+	case 0:
+		c->guard_interval = GUARD_INTERVAL_1_32;
+		break;
+	case 1:
+		c->guard_interval = GUARD_INTERVAL_1_16;
+		break;
+	case 2:
+		c->guard_interval = GUARD_INTERVAL_1_8;
+		break;
+	case 3:
+		c->guard_interval = GUARD_INTERVAL_1_4;
+		break;
+	}
+
+	switch ((buf[0] >> 4) & 7) {
+	case 0:
+		c->hierarchy = HIERARCHY_NONE;
+		break;
+	case 1:
+		c->hierarchy = HIERARCHY_1;
+		break;
+	case 2:
+		c->hierarchy = HIERARCHY_2;
+		break;
+	case 3:
+		c->hierarchy = HIERARCHY_4;
+		break;
+	}
+
+	switch ((buf[2] >> 0) & 7) {
+	case 0:
+		c->code_rate_HP = FEC_1_2;
+		break;
+	case 1:
+		c->code_rate_HP = FEC_2_3;
+		break;
+	case 2:
+		c->code_rate_HP = FEC_3_4;
+		break;
+	case 3:
+		c->code_rate_HP = FEC_5_6;
+		break;
+	case 4:
+		c->code_rate_HP = FEC_7_8;
+		break;
+	}
+
+	switch ((buf[2] >> 3) & 7) {
+	case 0:
+		c->code_rate_LP = FEC_1_2;
+		break;
+	case 1:
+		c->code_rate_LP = FEC_2_3;
+		break;
+	case 2:
+		c->code_rate_LP = FEC_3_4;
+		break;
+	case 3:
+		c->code_rate_LP = FEC_5_6;
+		break;
+	case 4:
+		c->code_rate_LP = FEC_7_8;
+		break;
+	}
+
+	switch ((buf[1] >> 2) & 3) {
+	case 0:
+		c->bandwidth_hz = 6000000;
+		break;
+	case 1:
+		c->bandwidth_hz = 7000000;
+		break;
+	case 2:
+		c->bandwidth_hz = 8000000;
+		break;
+	}
+
+	return 0;
+err:
+	dev_dbg(&client->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int af9013_read_status(struct dvb_frontend *fe, enum fe_status *status)
+{
+	struct af9013_state *state = fe->demodulator_priv;
+	struct i2c_client *client = state->client;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	int ret, stmp1;
+	unsigned int utmp, utmp1, utmp2, utmp3, utmp4;
+	u8 buf[7];
+
+	dev_dbg(&client->dev, "\n");
+
+	/*
+	 * Return status from the cache if it is younger than 2000ms with the
+	 * exception of last tune is done during 4000ms.
+	 */
+	if (time_is_after_jiffies(state->read_status_jiffies + msecs_to_jiffies(2000)) &&
+	    time_is_before_jiffies(state->set_frontend_jiffies + msecs_to_jiffies(4000))) {
+		*status = state->fe_status;
+	} else {
+		/* MPEG2 lock */
+		ret = regmap_read(state->regmap, 0xd507, &utmp);
+		if (ret)
+			goto err;
+
+		if ((utmp >> 6) & 0x01) {
+			utmp1 = FE_HAS_SIGNAL | FE_HAS_CARRIER |
+				FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
+		} else {
+			/* TPS lock */
+			ret = regmap_read(state->regmap, 0xd330, &utmp);
+			if (ret)
+				goto err;
+
+			if ((utmp >> 3) & 0x01)
+				utmp1 = FE_HAS_SIGNAL | FE_HAS_CARRIER |
+					FE_HAS_VITERBI;
+			else
+				utmp1 = 0;
+		}
+
+		dev_dbg(&client->dev, "fe_status %02x\n", utmp1);
+
+		state->read_status_jiffies = jiffies;
+
+		state->fe_status = utmp1;
+		*status = utmp1;
+	}
+
+	/* Signal strength */
+	switch (state->strength_en) {
+	case 0:
+		/* Check if we support signal strength */
+		ret = regmap_read(state->regmap, 0x9bee, &utmp);
+		if (ret)
+			goto err;
+
+		if ((utmp >> 0) & 0x01) {
+			/* Read agc values for signal strength estimation */
+			ret = regmap_read(state->regmap, 0x9bbd, &utmp1);
+			if (ret)
+				goto err;
+			ret = regmap_read(state->regmap, 0x9bd0, &utmp2);
+			if (ret)
+				goto err;
+			ret = regmap_read(state->regmap, 0x9be2, &utmp3);
+			if (ret)
+				goto err;
+			ret = regmap_read(state->regmap, 0x9be4, &utmp4);
+			if (ret)
+				goto err;
+
+			state->rf_agc_50 = utmp1;
+			state->rf_agc_80 = utmp2;
+			state->if_agc_50 = utmp3;
+			state->if_agc_80 = utmp4;
+			dev_dbg(&client->dev,
+				"rf_agc_50 %u, rf_agc_80 %u, if_agc_50 %u, if_agc_80 %u\n",
+				utmp1, utmp2, utmp3, utmp4);
+
+			state->strength_en = 1;
+		} else {
+			/* Signal strength is not supported */
+			state->strength_en = 2;
+			break;
+		}
+		/* Fall through */
+	case 1:
+		if (time_is_after_jiffies(state->strength_jiffies + msecs_to_jiffies(2000)))
+			break;
+
+		/* Read value */
+		ret = regmap_bulk_read(state->regmap, 0xd07c, buf, 2);
+		if (ret)
+			goto err;
+
+		/*
+		 * Construct line equation from tuner dependent -80/-50 dBm agc
+		 * limits and use it to map current agc value to dBm estimate
+		 */
+		#define agc_gain (buf[0] + buf[1])
+		#define agc_gain_50dbm (state->rf_agc_50 + state->if_agc_50)
+		#define agc_gain_80dbm (state->rf_agc_80 + state->if_agc_80)
+		stmp1 = 30000 * (agc_gain - agc_gain_80dbm) /
+			(agc_gain_50dbm - agc_gain_80dbm) - 80000;
+
+		dev_dbg(&client->dev,
+			"strength %d, agc_gain %d, agc_gain_50dbm %d, agc_gain_80dbm %d\n",
+			stmp1, agc_gain, agc_gain_50dbm, agc_gain_80dbm);
+
+		state->strength_jiffies = jiffies;
+		/* Convert [-90, -30] dBm to [0x0000, 0xffff] for dvbv3 */
+		utmp1 = clamp(stmp1 + 90000, 0, 60000);
+		state->dvbv3_strength = div_u64((u64)utmp1 * 0xffff, 60000);
+
+		c->strength.stat[0].scale = FE_SCALE_DECIBEL;
+		c->strength.stat[0].svalue = stmp1;
+		break;
+	default:
+		c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+		break;
+	}
+
+	/* CNR */
+	switch (state->fe_status & FE_HAS_VITERBI) {
+	case FE_HAS_VITERBI:
+		if (time_is_after_jiffies(state->cnr_jiffies + msecs_to_jiffies(2000)))
+			break;
+
+		/* Check if cnr ready */
+		ret = regmap_read(state->regmap, 0xd2e1, &utmp);
+		if (ret)
+			goto err;
+
+		if (!((utmp >> 3) & 0x01)) {
+			dev_dbg(&client->dev, "cnr not ready\n");
+			break;
+		}
+
+		/* Read value */
+		ret = regmap_bulk_read(state->regmap, 0xd2e3, buf, 3);
+		if (ret)
+			goto err;
+
+		utmp1 = buf[2] << 16 | buf[1] << 8 | buf[0] << 0;
+
+		/* Read current modulation */
+		ret = regmap_read(state->regmap, 0xd3c1, &utmp);
+		if (ret)
+			goto err;
+
+		switch ((utmp >> 6) & 3) {
+		case 0:
+			/*
+			 * QPSK
+			 * CNR[dB] 13 * -log10((1690000 - value) / value) + 2.6
+			 * value [653799, 1689999], 2.6 / 13 = 3355443
+			 */
+			utmp1 = clamp(utmp1, 653799U, 1689999U);
+			utmp1 = ((u64)(intlog10(utmp1)
+				- intlog10(1690000 - utmp1)
+				+ 3355443) * 13 * 1000) >> 24;
+			break;
+		case 1:
+			/*
+			 * QAM-16
+			 * CNR[dB] 6 * log10((value - 370000) / (828000 - value)) + 15.7
+			 * value [371105, 827999], 15.7 / 6 = 43900382
+			 */
+			utmp1 = clamp(utmp1, 371105U, 827999U);
+			utmp1 = ((u64)(intlog10(utmp1 - 370000)
+				- intlog10(828000 - utmp1)
+				+ 43900382) * 6 * 1000) >> 24;
+			break;
+		case 2:
+			/*
+			 * QAM-64
+			 * CNR[dB] 8 * log10((value - 193000) / (425000 - value)) + 23.8
+			 * value [193246, 424999], 23.8 / 8 = 49912218
+			 */
+			utmp1 = clamp(utmp1, 193246U, 424999U);
+			utmp1 = ((u64)(intlog10(utmp1 - 193000)
+				- intlog10(425000 - utmp1)
+				+ 49912218) * 8 * 1000) >> 24;
+			break;
+		default:
+			dev_dbg(&client->dev, "invalid modulation %u\n",
+				(utmp >> 6) & 3);
+			utmp1 = 0;
+			break;
+		}
+
+		dev_dbg(&client->dev, "cnr %u\n", utmp1);
+
+		state->cnr_jiffies = jiffies;
+		state->dvbv3_snr = utmp1 / 100;
+
+		c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
+		c->cnr.stat[0].svalue = utmp1;
+		break;
+	default:
+		c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+		break;
+	}
+
+	/* BER / PER */
+	switch (state->fe_status & FE_HAS_SYNC) {
+	case FE_HAS_SYNC:
+		if (time_is_after_jiffies(state->ber_ucb_jiffies + msecs_to_jiffies(2000)))
+			break;
+
+		/* Check if ber / ucb is ready */
+		ret = regmap_read(state->regmap, 0xd391, &utmp);
+		if (ret)
+			goto err;
+
+		if (!((utmp >> 4) & 0x01)) {
+			dev_dbg(&client->dev, "ber not ready\n");
+			break;
+		}
+
+		/* Read value */
+		ret = regmap_bulk_read(state->regmap, 0xd385, buf, 7);
+		if (ret)
+			goto err;
+
+		utmp1 = buf[4] << 16 | buf[3] << 8 | buf[2] << 0;
+		utmp2 = (buf[1] << 8 | buf[0] << 0) * 204 * 8;
+		utmp3 = buf[6] << 8 | buf[5] << 0;
+		utmp4 = buf[1] << 8 | buf[0] << 0;
+
+		/* Use 10000 TS packets for measure */
+		if (utmp4 != 10000) {
+			buf[0] = (10000 >> 0) & 0xff;
+			buf[1] = (10000 >> 8) & 0xff;
+			ret = regmap_bulk_write(state->regmap, 0xd385, buf, 2);
+			if (ret)
+				goto err;
+		}
+
+		/* Reset ber / ucb counter */
+		ret = regmap_update_bits(state->regmap, 0xd391, 0x20, 0x20);
+		if (ret)
+			goto err;
+
+		dev_dbg(&client->dev, "post_bit_error %u, post_bit_count %u\n",
+			utmp1, utmp2);
+		dev_dbg(&client->dev, "block_error %u, block_count %u\n",
+			utmp3, utmp4);
+
+		state->ber_ucb_jiffies = jiffies;
+		state->dvbv3_ber = utmp1;
+		state->dvbv3_ucblocks += utmp3;
+
+		c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
+		c->post_bit_error.stat[0].uvalue += utmp1;
+		c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
+		c->post_bit_count.stat[0].uvalue += utmp2;
+
+		c->block_error.stat[0].scale = FE_SCALE_COUNTER;
+		c->block_error.stat[0].uvalue += utmp3;
+		c->block_count.stat[0].scale = FE_SCALE_COUNTER;
+		c->block_count.stat[0].uvalue += utmp4;
+		break;
+	default:
+		c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+		c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+
+		c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+		c->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+		break;
+	}
+
+	return 0;
+err:
+	dev_dbg(&client->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int af9013_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	struct af9013_state *state = fe->demodulator_priv;
+
+	*snr = state->dvbv3_snr;
+
+	return 0;
+}
+
+static int af9013_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+	struct af9013_state *state = fe->demodulator_priv;
+
+	*strength = state->dvbv3_strength;
+
+	return 0;
+}
+
+static int af9013_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	struct af9013_state *state = fe->demodulator_priv;
+
+	*ber = state->dvbv3_ber;
+
+	return 0;
+}
+
+static int af9013_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+	struct af9013_state *state = fe->demodulator_priv;
+
+	*ucblocks = state->dvbv3_ucblocks;
+
+	return 0;
+}
+
+static int af9013_init(struct dvb_frontend *fe)
+{
+	struct af9013_state *state = fe->demodulator_priv;
+	struct i2c_client *client = state->client;
+	int ret, i, len;
+	unsigned int utmp;
+	u8 buf[3];
+	const struct af9013_reg_mask_val *tab;
+
+	dev_dbg(&client->dev, "\n");
+
+	/* ADC on */
+	ret = regmap_update_bits(state->regmap, 0xd73a, 0x08, 0x00);
+	if (ret)
+		goto err;
+
+	/* Clear reset */
+	ret = regmap_update_bits(state->regmap, 0xd417, 0x02, 0x00);
+	if (ret)
+		goto err;
+
+	/* Disable reset */
+	ret = regmap_update_bits(state->regmap, 0xd417, 0x10, 0x00);
+	if (ret)
+		goto err;
+
+	/* write API version to firmware */
+	ret = regmap_bulk_write(state->regmap, 0x9bf2, state->api_version, 4);
+	if (ret)
+		goto err;
+
+	/* program ADC control */
+	switch (state->clk) {
+	case 28800000: /* 28.800 MHz */
+		utmp = 0;
+		break;
+	case 20480000: /* 20.480 MHz */
+		utmp = 1;
+		break;
+	case 28000000: /* 28.000 MHz */
+		utmp = 2;
+		break;
+	case 25000000: /* 25.000 MHz */
+		utmp = 3;
+		break;
+	default:
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ret = regmap_update_bits(state->regmap, 0x9bd2, 0x0f, utmp);
+	if (ret)
+		goto err;
+
+	utmp = div_u64((u64)state->clk * 0x80000, 1000000);
+	buf[0] = (utmp >>  0) & 0xff;
+	buf[1] = (utmp >>  8) & 0xff;
+	buf[2] = (utmp >> 16) & 0xff;
+	ret = regmap_bulk_write(state->regmap, 0xd180, buf, 3);
+	if (ret)
+		goto err;
+
+	/* Demod core settings */
+	dev_dbg(&client->dev, "load demod core settings\n");
+	len = ARRAY_SIZE(demod_init_tab);
+	tab = demod_init_tab;
+	for (i = 0; i < len; i++) {
+		ret = regmap_update_bits(state->regmap, tab[i].reg, tab[i].mask,
+					 tab[i].val);
+		if (ret)
+			goto err;
+	}
+
+	/* Demod tuner specific settings */
+	dev_dbg(&client->dev, "load tuner specific settings\n");
+	switch (state->tuner) {
+	case AF9013_TUNER_MXL5003D:
+		len = ARRAY_SIZE(tuner_init_tab_mxl5003d);
+		tab = tuner_init_tab_mxl5003d;
+		break;
+	case AF9013_TUNER_MXL5005D:
+	case AF9013_TUNER_MXL5005R:
+	case AF9013_TUNER_MXL5007T:
+		len = ARRAY_SIZE(tuner_init_tab_mxl5005);
+		tab = tuner_init_tab_mxl5005;
+		break;
+	case AF9013_TUNER_ENV77H11D5:
+		len = ARRAY_SIZE(tuner_init_tab_env77h11d5);
+		tab = tuner_init_tab_env77h11d5;
+		break;
+	case AF9013_TUNER_MT2060:
+		len = ARRAY_SIZE(tuner_init_tab_mt2060);
+		tab = tuner_init_tab_mt2060;
+		break;
+	case AF9013_TUNER_MC44S803:
+		len = ARRAY_SIZE(tuner_init_tab_mc44s803);
+		tab = tuner_init_tab_mc44s803;
+		break;
+	case AF9013_TUNER_QT1010:
+	case AF9013_TUNER_QT1010A:
+		len = ARRAY_SIZE(tuner_init_tab_qt1010);
+		tab = tuner_init_tab_qt1010;
+		break;
+	case AF9013_TUNER_MT2060_2:
+		len = ARRAY_SIZE(tuner_init_tab_mt2060_2);
+		tab = tuner_init_tab_mt2060_2;
+		break;
+	case AF9013_TUNER_TDA18271:
+	case AF9013_TUNER_TDA18218:
+		len = ARRAY_SIZE(tuner_init_tab_tda18271);
+		tab = tuner_init_tab_tda18271;
+		break;
+	case AF9013_TUNER_UNKNOWN:
+	default:
+		len = ARRAY_SIZE(tuner_init_tab_unknown);
+		tab = tuner_init_tab_unknown;
+		break;
+	}
+
+	for (i = 0; i < len; i++) {
+		ret = regmap_update_bits(state->regmap, tab[i].reg, tab[i].mask,
+					 tab[i].val);
+		if (ret)
+			goto err;
+	}
+
+	/* TS interface */
+	if (state->ts_output_pin == 7)
+		utmp = 1 << 3 | state->ts_mode << 1;
+	else
+		utmp = 0 << 3 | state->ts_mode << 1;
+	ret = regmap_update_bits(state->regmap, 0xd500, 0x0e, utmp);
+	if (ret)
+		goto err;
+
+	/* enable lock led */
+	ret = regmap_update_bits(state->regmap, 0xd730, 0x01, 0x01);
+	if (ret)
+		goto err;
+
+	state->first_tune = true;
+
+	return 0;
+err:
+	dev_dbg(&client->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int af9013_sleep(struct dvb_frontend *fe)
+{
+	struct af9013_state *state = fe->demodulator_priv;
+	struct i2c_client *client = state->client;
+	int ret;
+	unsigned int utmp;
+
+	dev_dbg(&client->dev, "\n");
+
+	/* disable lock led */
+	ret = regmap_update_bits(state->regmap, 0xd730, 0x01, 0x00);
+	if (ret)
+		goto err;
+
+	/* Enable reset */
+	ret = regmap_update_bits(state->regmap, 0xd417, 0x10, 0x10);
+	if (ret)
+		goto err;
+
+	/* Start reset execution */
+	ret = regmap_write(state->regmap, 0xaeff, 0x01);
+	if (ret)
+		goto err;
+
+	/* Wait reset performs */
+	ret = regmap_read_poll_timeout(state->regmap, 0xd417, utmp,
+				       (utmp >> 1) & 0x01, 5000, 1000000);
+	if (ret)
+		goto err;
+
+	if (!((utmp >> 1) & 0x01)) {
+		ret = -ETIMEDOUT;
+		goto err;
+	}
+
+	/* ADC off */
+	ret = regmap_update_bits(state->regmap, 0xd73a, 0x08, 0x08);
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	dev_dbg(&client->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static const struct dvb_frontend_ops af9013_ops;
+
+static int af9013_download_firmware(struct af9013_state *state)
+{
+	struct i2c_client *client = state->client;
+	int ret, i, len, rem;
+	unsigned int utmp;
+	u8 buf[4];
+	u16 checksum = 0;
+	const struct firmware *firmware;
+	const char *name = AF9013_FIRMWARE;
+
+	dev_dbg(&client->dev, "\n");
+
+	/* Check whether firmware is already running */
+	ret = regmap_read(state->regmap, 0x98be, &utmp);
+	if (ret)
+		goto err;
+
+	dev_dbg(&client->dev, "firmware status %02x\n", utmp);
+
+	if (utmp == 0x0c)
+		return 0;
+
+	dev_info(&client->dev, "found a '%s' in cold state, will try to load a firmware\n",
+		 af9013_ops.info.name);
+
+	/* Request the firmware, will block and timeout */
+	ret = request_firmware(&firmware, name, &client->dev);
+	if (ret) {
+		dev_info(&client->dev, "firmware file '%s' not found %d\n",
+			 name, ret);
+		goto err;
+	}
+
+	dev_info(&client->dev, "downloading firmware from file '%s'\n",
+		 name);
+
+	/* Write firmware checksum & size */
+	for (i = 0; i < firmware->size; i++)
+		checksum += firmware->data[i];
+
+	buf[0] = (checksum >> 8) & 0xff;
+	buf[1] = (checksum >> 0) & 0xff;
+	buf[2] = (firmware->size >> 8) & 0xff;
+	buf[3] = (firmware->size >> 0) & 0xff;
+	ret = regmap_bulk_write(state->regmap, 0x50fc, buf, 4);
+	if (ret)
+		goto err_release_firmware;
+
+	/* Download firmware */
+	#define LEN_MAX 16
+	for (rem = firmware->size; rem > 0; rem -= LEN_MAX) {
+		len = min(LEN_MAX, rem);
+		ret = regmap_bulk_write(state->regmap,
+					0x5100 + firmware->size - rem,
+					&firmware->data[firmware->size - rem],
+					len);
+		if (ret) {
+			dev_err(&client->dev, "firmware download failed %d\n",
+				ret);
+			goto err_release_firmware;
+		}
+	}
+
+	release_firmware(firmware);
+
+	/* Boot firmware */
+	ret = regmap_write(state->regmap, 0xe205, 0x01);
+	if (ret)
+		goto err;
+
+	/* Check firmware status. 0c=OK, 04=fail */
+	ret = regmap_read_poll_timeout(state->regmap, 0x98be, utmp,
+				       (utmp == 0x0c || utmp == 0x04),
+				       5000, 1000000);
+	if (ret)
+		goto err;
+
+	dev_dbg(&client->dev, "firmware status %02x\n", utmp);
+
+	if (utmp == 0x04) {
+		ret = -ENODEV;
+		dev_err(&client->dev, "firmware did not run\n");
+		goto err;
+	} else if (utmp != 0x0c) {
+		ret = -ENODEV;
+		dev_err(&client->dev, "firmware boot timeout\n");
+		goto err;
+	}
+
+	dev_info(&client->dev, "found a '%s' in warm state\n",
+		 af9013_ops.info.name);
+
+	return 0;
+err_release_firmware:
+	release_firmware(firmware);
+err:
+	dev_dbg(&client->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static const struct dvb_frontend_ops af9013_ops = {
+	.delsys = { SYS_DVBT },
+	.info = {
+		.name = "Afatech AF9013",
+		.frequency_min_hz = 174 * MHz,
+		.frequency_max_hz = 862 * MHz,
+		.frequency_stepsize_hz = 250 * kHz,
+		.caps =	FE_CAN_FEC_1_2 |
+			FE_CAN_FEC_2_3 |
+			FE_CAN_FEC_3_4 |
+			FE_CAN_FEC_5_6 |
+			FE_CAN_FEC_7_8 |
+			FE_CAN_FEC_AUTO |
+			FE_CAN_QPSK |
+			FE_CAN_QAM_16 |
+			FE_CAN_QAM_64 |
+			FE_CAN_QAM_AUTO |
+			FE_CAN_TRANSMISSION_MODE_AUTO |
+			FE_CAN_GUARD_INTERVAL_AUTO |
+			FE_CAN_HIERARCHY_AUTO |
+			FE_CAN_RECOVER |
+			FE_CAN_MUTE_TS
+	},
+
+	.init = af9013_init,
+	.sleep = af9013_sleep,
+
+	.get_tune_settings = af9013_get_tune_settings,
+	.set_frontend = af9013_set_frontend,
+	.get_frontend = af9013_get_frontend,
+
+	.read_status = af9013_read_status,
+	.read_snr = af9013_read_snr,
+	.read_signal_strength = af9013_read_signal_strength,
+	.read_ber = af9013_read_ber,
+	.read_ucblocks = af9013_read_ucblocks,
+};
+
+static int af9013_pid_filter_ctrl(struct dvb_frontend *fe, int onoff)
+{
+	struct af9013_state *state = fe->demodulator_priv;
+	struct i2c_client *client = state->client;
+	int ret;
+
+	dev_dbg(&client->dev, "onoff %d\n", onoff);
+
+	ret = regmap_update_bits(state->regmap, 0xd503, 0x01, onoff);
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	dev_dbg(&client->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int af9013_pid_filter(struct dvb_frontend *fe, u8 index, u16 pid,
+			     int onoff)
+{
+	struct af9013_state *state = fe->demodulator_priv;
+	struct i2c_client *client = state->client;
+	int ret;
+	u8 buf[2];
+
+	dev_dbg(&client->dev, "index %d, pid %04x, onoff %d\n",
+		index, pid, onoff);
+
+	if (pid > 0x1fff) {
+		/* 0x2000 is kernel virtual pid for whole ts (all pids) */
+		ret = 0;
+		goto err;
+	}
+
+	buf[0] = (pid >> 0) & 0xff;
+	buf[1] = (pid >> 8) & 0xff;
+	ret = regmap_bulk_write(state->regmap, 0xd505, buf, 2);
+	if (ret)
+		goto err;
+	ret = regmap_write(state->regmap, 0xd504, onoff << 5 | index << 0);
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	dev_dbg(&client->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static struct dvb_frontend *af9013_get_dvb_frontend(struct i2c_client *client)
+{
+	struct af9013_state *state = i2c_get_clientdata(client);
+
+	dev_dbg(&client->dev, "\n");
+
+	return &state->fe;
+}
+
+static struct i2c_adapter *af9013_get_i2c_adapter(struct i2c_client *client)
+{
+	struct af9013_state *state = i2c_get_clientdata(client);
+
+	dev_dbg(&client->dev, "\n");
+
+	return state->muxc->adapter[0];
+}
+
+/*
+ * XXX: Hackish solution. We use virtual register, reg bit 16, to carry info
+ * about i2c adapter locking. Own locking is needed because i2c mux call has
+ * already locked i2c adapter.
+ */
+static int af9013_select(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct af9013_state *state = i2c_mux_priv(muxc);
+	struct i2c_client *client = state->client;
+	int ret;
+
+	dev_dbg(&client->dev, "\n");
+
+	if (state->ts_mode == AF9013_TS_MODE_USB)
+		ret = regmap_update_bits(state->regmap, 0x1d417, 0x08, 0x08);
+	else
+		ret = regmap_update_bits(state->regmap, 0x1d607, 0x04, 0x04);
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	dev_dbg(&client->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int af9013_deselect(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct af9013_state *state = i2c_mux_priv(muxc);
+	struct i2c_client *client = state->client;
+	int ret;
+
+	dev_dbg(&client->dev, "\n");
+
+	if (state->ts_mode == AF9013_TS_MODE_USB)
+		ret = regmap_update_bits(state->regmap, 0x1d417, 0x08, 0x00);
+	else
+		ret = regmap_update_bits(state->regmap, 0x1d607, 0x04, 0x00);
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	dev_dbg(&client->dev, "failed %d\n", ret);
+	return ret;
+}
+
+/* Own I2C access routines needed for regmap as chip uses extra command byte */
+static int af9013_wregs(struct i2c_client *client, u8 cmd, u16 reg,
+			const u8 *val, int len, u8 lock)
+{
+	int ret;
+	u8 buf[21];
+	struct i2c_msg msg[1] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = 3 + len,
+			.buf = buf,
+		}
+	};
+
+	if (3 + len > sizeof(buf)) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	buf[0] = (reg >> 8) & 0xff;
+	buf[1] = (reg >> 0) & 0xff;
+	buf[2] = cmd;
+	memcpy(&buf[3], val, len);
+
+	if (lock)
+		i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT);
+	ret = __i2c_transfer(client->adapter, msg, 1);
+	if (lock)
+		i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
+	if (ret < 0) {
+		goto err;
+	} else if (ret != 1) {
+		ret = -EREMOTEIO;
+		goto err;
+	}
+
+	return 0;
+err:
+	dev_dbg(&client->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int af9013_rregs(struct i2c_client *client, u8 cmd, u16 reg,
+			u8 *val, int len, u8 lock)
+{
+	int ret;
+	u8 buf[3];
+	struct i2c_msg msg[2] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = 3,
+			.buf = buf,
+		}, {
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = len,
+			.buf = val,
+		}
+	};
+
+	buf[0] = (reg >> 8) & 0xff;
+	buf[1] = (reg >> 0) & 0xff;
+	buf[2] = cmd;
+
+	if (lock)
+		i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT);
+	ret = __i2c_transfer(client->adapter, msg, 2);
+	if (lock)
+		i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
+	if (ret < 0) {
+		goto err;
+	} else if (ret != 2) {
+		ret = -EREMOTEIO;
+		goto err;
+	}
+
+	return 0;
+err:
+	dev_dbg(&client->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int af9013_regmap_write(void *context, const void *data, size_t count)
+{
+	struct i2c_client *client = context;
+	struct af9013_state *state = i2c_get_clientdata(client);
+	int ret, i;
+	u8 cmd;
+	u8 lock = !((u8 *)data)[0];
+	u16 reg = ((u8 *)data)[1] << 8 | ((u8 *)data)[2] << 0;
+	u8 *val = &((u8 *)data)[3];
+	const unsigned int len = count - 3;
+
+	if (state->ts_mode == AF9013_TS_MODE_USB && (reg & 0xff00) != 0xae00) {
+		cmd = 0 << 7|0 << 6|(len - 1) << 2|1 << 1|1 << 0;
+		ret = af9013_wregs(client, cmd, reg, val, len, lock);
+		if (ret)
+			goto err;
+	} else if (reg >= 0x5100 && reg < 0x8fff) {
+		/* Firmware download */
+		cmd = 1 << 7|1 << 6|(len - 1) << 2|1 << 1|1 << 0;
+		ret = af9013_wregs(client, cmd, reg, val, len, lock);
+		if (ret)
+			goto err;
+	} else {
+		cmd = 0 << 7|0 << 6|(1 - 1) << 2|1 << 1|1 << 0;
+		for (i = 0; i < len; i++) {
+			ret = af9013_wregs(client, cmd, reg + i, val + i, 1,
+					   lock);
+			if (ret)
+				goto err;
+		}
+	}
+
+	return 0;
+err:
+	dev_dbg(&client->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int af9013_regmap_read(void *context, const void *reg_buf,
+			      size_t reg_size, void *val_buf, size_t val_size)
+{
+	struct i2c_client *client = context;
+	struct af9013_state *state = i2c_get_clientdata(client);
+	int ret, i;
+	u8 cmd;
+	u8 lock = !((u8 *)reg_buf)[0];
+	u16 reg = ((u8 *)reg_buf)[1] << 8 | ((u8 *)reg_buf)[2] << 0;
+	u8 *val = &((u8 *)val_buf)[0];
+	const unsigned int len = val_size;
+
+	if (state->ts_mode == AF9013_TS_MODE_USB && (reg & 0xff00) != 0xae00) {
+		cmd = 0 << 7|0 << 6|(len - 1) << 2|1 << 1|0 << 0;
+		ret = af9013_rregs(client, cmd, reg, val_buf, len, lock);
+		if (ret)
+			goto err;
+	} else {
+		cmd = 0 << 7|0 << 6|(1 - 1) << 2|1 << 1|0 << 0;
+		for (i = 0; i < len; i++) {
+			ret = af9013_rregs(client, cmd, reg + i, val + i, 1,
+					   lock);
+			if (ret)
+				goto err;
+		}
+	}
+
+	return 0;
+err:
+	dev_dbg(&client->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int af9013_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct af9013_state *state;
+	struct af9013_platform_data *pdata = client->dev.platform_data;
+	struct dtv_frontend_properties *c;
+	int ret, i;
+	u8 firmware_version[4];
+	static const struct regmap_bus regmap_bus = {
+		.read = af9013_regmap_read,
+		.write = af9013_regmap_write,
+	};
+	static const struct regmap_config regmap_config = {
+		/* Actual reg is 16 bits, see i2c adapter lock */
+		.reg_bits = 24,
+		.val_bits = 8,
+	};
+
+	state = kzalloc(sizeof(*state), GFP_KERNEL);
+	if (!state) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	dev_dbg(&client->dev, "\n");
+
+	/* Setup the state */
+	state->client = client;
+	i2c_set_clientdata(client, state);
+	state->clk = pdata->clk;
+	state->tuner = pdata->tuner;
+	state->if_frequency = pdata->if_frequency;
+	state->ts_mode = pdata->ts_mode;
+	state->ts_output_pin = pdata->ts_output_pin;
+	state->spec_inv = pdata->spec_inv;
+	memcpy(&state->api_version, pdata->api_version, sizeof(state->api_version));
+	memcpy(&state->gpio, pdata->gpio, sizeof(state->gpio));
+	state->regmap = regmap_init(&client->dev, &regmap_bus, client,
+				  &regmap_config);
+	if (IS_ERR(state->regmap)) {
+		ret = PTR_ERR(state->regmap);
+		goto err_kfree;
+	}
+	/* Create mux i2c adapter */
+	state->muxc = i2c_mux_alloc(client->adapter, &client->dev, 1, 0, 0,
+				    af9013_select, af9013_deselect);
+	if (!state->muxc) {
+		ret = -ENOMEM;
+		goto err_regmap_exit;
+	}
+	state->muxc->priv = state;
+	ret = i2c_mux_add_adapter(state->muxc, 0, 0, 0);
+	if (ret)
+		goto err_regmap_exit;
+
+	/* Download firmware */
+	if (state->ts_mode != AF9013_TS_MODE_USB) {
+		ret = af9013_download_firmware(state);
+		if (ret)
+			goto err_i2c_mux_del_adapters;
+	}
+
+	/* Firmware version */
+	ret = regmap_bulk_read(state->regmap, 0x5103, firmware_version,
+			       sizeof(firmware_version));
+	if (ret)
+		goto err_i2c_mux_del_adapters;
+
+	/* Set GPIOs */
+	for (i = 0; i < sizeof(state->gpio); i++) {
+		ret = af9013_set_gpio(state, i, state->gpio[i]);
+		if (ret)
+			goto err_i2c_mux_del_adapters;
+	}
+
+	/* Create dvb frontend */
+	memcpy(&state->fe.ops, &af9013_ops, sizeof(state->fe.ops));
+	state->fe.demodulator_priv = state;
+
+	/* Setup callbacks */
+	pdata->get_dvb_frontend = af9013_get_dvb_frontend;
+	pdata->get_i2c_adapter = af9013_get_i2c_adapter;
+	pdata->pid_filter = af9013_pid_filter;
+	pdata->pid_filter_ctrl = af9013_pid_filter_ctrl;
+
+	/* Init stats to indicate which stats are supported */
+	c = &state->fe.dtv_property_cache;
+	c->strength.len = 1;
+	c->cnr.len = 1;
+	c->post_bit_error.len = 1;
+	c->post_bit_count.len = 1;
+	c->block_error.len = 1;
+	c->block_count.len = 1;
+
+	dev_info(&client->dev, "Afatech AF9013 successfully attached\n");
+	dev_info(&client->dev, "firmware version: %d.%d.%d.%d\n",
+		 firmware_version[0], firmware_version[1],
+		 firmware_version[2], firmware_version[3]);
+	return 0;
+err_i2c_mux_del_adapters:
+	i2c_mux_del_adapters(state->muxc);
+err_regmap_exit:
+	regmap_exit(state->regmap);
+err_kfree:
+	kfree(state);
+err:
+	dev_dbg(&client->dev, "failed %d\n", ret);
+	return ret;
+}
+
+static int af9013_remove(struct i2c_client *client)
+{
+	struct af9013_state *state = i2c_get_clientdata(client);
+
+	dev_dbg(&client->dev, "\n");
+
+	i2c_mux_del_adapters(state->muxc);
+
+	regmap_exit(state->regmap);
+
+	kfree(state);
+
+	return 0;
+}
+
+static const struct i2c_device_id af9013_id_table[] = {
+	{"af9013", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, af9013_id_table);
+
+static struct i2c_driver af9013_driver = {
+	.driver = {
+		.name	= "af9013",
+		.suppress_bind_attrs = true,
+	},
+	.probe		= af9013_probe,
+	.remove		= af9013_remove,
+	.id_table	= af9013_id_table,
+};
+
+module_i2c_driver(af9013_driver);
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("Afatech AF9013 DVB-T demodulator driver");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(AF9013_FIRMWARE);