Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 161 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/stb0899_drv.h b/drivers/media/dvb-frontends/stb0899_drv.h
new file mode 100644
index 000000000..f65f9a826
--- /dev/null
+++ b/drivers/media/dvb-frontends/stb0899_drv.h
@@ -0,0 +1,161 @@
+/*
+	STB0899 Multistandard Frontend driver
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+	Copyright (C) ST Microelectronics
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the Free Software
+	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __STB0899_DRV_H
+#define __STB0899_DRV_H
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <media/dvb_frontend.h>
+
+#define STB0899_TSMODE_SERIAL		1
+#define STB0899_CLKPOL_FALLING		2
+#define STB0899_CLKNULL_PARITY		3
+#define STB0899_SYNC_FORCED		4
+#define STB0899_FECMODE_DSS		5
+
+struct stb0899_s1_reg {
+	u16	address;
+	u8	data;
+};
+
+struct stb0899_s2_reg {
+	u16	offset;
+	u32	base_address;
+	u32	data;
+};
+
+enum stb0899_inversion {
+	IQ_SWAP_OFF	= +1, /* inversion affects the sign of e. g. */
+	IQ_SWAP_ON	= -1, /* the derotator frequency register    */
+};
+
+#define STB0899_GPIO00				0xf140
+#define STB0899_GPIO01				0xf141
+#define STB0899_GPIO02				0xf142
+#define STB0899_GPIO03				0xf143
+#define STB0899_GPIO04				0xf144
+#define STB0899_GPIO05				0xf145
+#define STB0899_GPIO06				0xf146
+#define STB0899_GPIO07				0xf147
+#define STB0899_GPIO08				0xf148
+#define STB0899_GPIO09				0xf149
+#define STB0899_GPIO10				0xf14a
+#define STB0899_GPIO11				0xf14b
+#define STB0899_GPIO12				0xf14c
+#define STB0899_GPIO13				0xf14d
+#define STB0899_GPIO14				0xf14e
+#define STB0899_GPIO15				0xf14f
+#define STB0899_GPIO16				0xf150
+#define STB0899_GPIO17				0xf151
+#define STB0899_GPIO18				0xf152
+#define STB0899_GPIO19				0xf153
+#define STB0899_GPIO20				0xf154
+
+#define STB0899_GPIOPULLUP			0x01 /* Output device is connected to Vdd */
+#define STB0899_GPIOPULLDN			0x00 /* Output device is connected to Vss */
+
+#define STB0899_POSTPROC_GPIO_POWER		0x00
+#define STB0899_POSTPROC_GPIO_LOCK		0x01
+
+/*
+ * Post process output configuration control
+ * 1. POWER ON/OFF		(index 0)
+ * 2. FE_HAS_LOCK/LOCK_LOSS	(index 1)
+ *
+ * @gpio	= one of the above listed GPIO's
+ * @level	= output state: pulled up or low
+ */
+struct stb0899_postproc {
+	u16	gpio;
+	u8	level;
+};
+
+struct stb0899_config {
+	const struct stb0899_s1_reg	*init_dev;
+	const struct stb0899_s2_reg	*init_s2_demod;
+	const struct stb0899_s1_reg	*init_s1_demod;
+	const struct stb0899_s2_reg	*init_s2_fec;
+	const struct stb0899_s1_reg	*init_tst;
+
+	const struct stb0899_postproc	*postproc;
+
+	enum stb0899_inversion		inversion;
+
+	u32	xtal_freq;
+
+	u8	demod_address;
+	u8	ts_output_mode;
+	u8	block_sync_mode;
+	u8	ts_pfbit_toggle;
+
+	u8	clock_polarity;
+	u8	data_clk_parity;
+	u8	fec_mode;
+	u8	data_output_ctl;
+	u8	data_fifo_mode;
+	u8	out_rate_comp;
+	u8	i2c_repeater;
+//	int	inversion;
+	int	lo_clk;
+	int	hi_clk;
+
+	u32	esno_ave;
+	u32	esno_quant;
+	u32	avframes_coarse;
+	u32	avframes_fine;
+	u32	miss_threshold;
+	u32	uwp_threshold_acq;
+	u32	uwp_threshold_track;
+	u32	uwp_threshold_sof;
+	u32	sof_search_timeout;
+
+	u32	btr_nco_bits;
+	u32	btr_gain_shift_offset;
+	u32	crl_nco_bits;
+	u32	ldpc_max_iter;
+
+	int (*tuner_set_frequency)(struct dvb_frontend *fe, u32 frequency);
+	int (*tuner_get_frequency)(struct dvb_frontend *fe, u32 *frequency);
+	int (*tuner_set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth);
+	int (*tuner_get_bandwidth)(struct dvb_frontend *fe, u32 *bandwidth);
+	int (*tuner_set_rfsiggain)(struct dvb_frontend *fe, u32 rf_gain);
+};
+
+#if IS_REACHABLE(CONFIG_DVB_STB0899)
+
+extern struct dvb_frontend *stb0899_attach(struct stb0899_config *config,
+					   struct i2c_adapter *i2c);
+
+#else
+
+static inline struct dvb_frontend *stb0899_attach(struct stb0899_config *config,
+						  struct i2c_adapter *i2c)
+{
+	printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+
+#endif //CONFIG_DVB_STB0899
+
+
+#endif